| 01:33.02 | *** join/#openezx kamathln (n=kamathln@122.167.158.85) |
| 02:17.45 | kamathln | I was going through the source of rwflash.c .. the bootloader section is defined to be added as a partition (in extra_partitions) but commented out .. |
| 02:18.05 | kamathln | is it safe to uncomment and use it ? why was it commented out ? |
| 02:33.02 | *** join/#openezx purl (i=ibot@rikers.org) |
| 02:33.02 | *** topic/#openezx is OpenEZX Developer Lounge -- http://www.openezx.org |
| 02:33.58 | *** join/#openezx _Andrew (n=andrew@unaffiliated/andrew/x-643872) |
| 02:48.52 | tmzt | kamathln: it's dangerous |
| 02:49.05 | tmzt | if you know what your doing I would assume it's okay |
| 02:49.16 | tmzt | but it's not enabled by default |
| 02:52.56 | kamathln | tmzt: all I know is , If it *does* what it is expected to do, I will have a new boot loader |
| 03:48.34 | *** join/#openezx flyhorse|linux (n=flyhorse@116.18.178.211) |
| 04:14.54 | *** join/#openezx johanbr (n=j@140.184.133.244) |
| 05:05.30 | kamathln | tmzt:downloading a780 source.. edited rwflash module source.. keeping fingers crossed |
| 05:47.29 | *** join/#openezx gDD (n=gDD@unaffiliated/gdd) |
| 06:41.21 | *** join/#openezx marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 07:10.22 | *** join/#openezx marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 07:27.48 | *** join/#openezx ao2 (n=u@2001:1418:117:0:0:0:0:1) |
| 08:23.57 | *** join/#openezx marex (n=marex@eduroam121.ms.mff.cuni.cz) |
| 09:04.24 | *** join/#openezx florian_kc (n=fuchs@Maemo/community/contributor/florian) |
| 09:38.13 | *** join/#openezx ao2 (n=u@2001:1418:117:0:0:0:0:1) |
| 10:35.52 | kamathln | whats the most likely way to unlock mtd withg flashkit ..I seem to be having flakey luck unlocking mtd (using normal kernel) |
| 10:38.27 | kamathln | oh wait |
| 10:50.00 | kamathln | nope .. did not work |
| 10:53.47 | ao2 | kamathln, still fiddling with 2.4 kernel? Why not using gen-blob to write on flash? |
| 10:55.12 | kamathln | ao2: I am using an a780 whos volume control and camera button are gone |
| 10:56.12 | ao2 | mmh, maybe you can put it in bootloader mode even from userspace, let me check |
| 10:56.59 | kamathln | ???! |
| 10:57.16 | ao2 | http://people.openezx.org/ao2/bp_command/ |
| 10:57.53 | ao2 | 2.4 kernel exposes some ioctl to write to ram values that will be checked by the bootloader on next boot |
| 10:58.30 | kamathln | oh! |
| 10:58.55 | kamathln | thx .. |
| 10:59.24 | kamathln | then I wont even need to flash gen-blob !! |
| 10:59.32 | ao2 | the REFLASH mode should do |
| 10:59.51 | kamathln | the reason i wanted gen-blob is to boot the kernel I want |
| 11:00.01 | ao2 | gen-blob is still handy to use, you can choose if you want to load it from usb or if you want to flash it |
| 11:00.54 | kamathln | ao2: pardon my noobness .. but once it is back in bootloader mode, I can use boot_usb right? |
| 11:01.01 | ao2 | right |
| 11:01.06 | kamathln | whew |
| 11:01.30 | ao2 | can you compile for original firmware? |
| 11:02.08 | kamathln | I did not get you.. |
| 11:02.24 | ao2 | to compile bp_comand |
| 11:02.30 | kamathln | I just used the arm compilers from arm.org.uk .. |
| 11:02.39 | kamathln | to compile rwflash.o |
| 11:02.44 | kamathln | so that should work right? |
| 11:02.45 | ao2 | ok then |
| 11:04.03 | ao2 | let me know if bp_command works I just did a very quick test when I wrote it. |
| 11:04.33 | kamathln | okie |
| 11:04.50 | ao2 | to enable reflash mode you should use "./bp_command 3" |
| 11:04.54 | kamathln | if you dont mind, |
| 11:05.21 | kamathln | err.. can you give me usb boot mode please ? |
| 11:05.36 | kamathln | so that I can push the kernel using boot_usb |
| 11:06.07 | kamathln | 4? |
| 11:06.09 | ao2 | "reflash mode" that should be it |
| 11:06.28 | kamathln | okie |
| 11:06.51 | kamathln | oh okie! what motorola calls reflash mode .. not really reflash mode right? |
| 11:07.40 | ao2 | it's a reflash mode indeed, you can reprogram most of the phone from usb |
| 11:08.15 | kamathln | okie |
| 11:10.20 | kamathln | ao2: I owe you one .. you are a cool dude(ette?) |
| 11:11.50 | ao2 | dude :) |
| 11:11.55 | ao2 | so it worked |
| 11:13.02 | kamathln | Yeah |
| 11:13.17 | ao2 | excellent |
| 11:13.18 | kamathln | I have a dump of the kernel /dev/mtd1 .. |
| 11:13.26 | kamathln | is ther eany offset ? |
| 11:13.39 | kamathln | or I just push the kernel using gen_blob? |
| 11:14.14 | ao2 | just load it with gen-blob |
| 11:14.22 | kamathln | okie |
| 11:14.38 | ao2 | or, directly to the blue bootloader, that could also work |
| 11:15.35 | kamathln | it didnt .. thhats the reason i asked |
| 11:16.04 | ao2 | paste the command line here |
| 11:16.10 | ao2 | or check on the wiki |
| 11:16.52 | kamathln | ./boot_usb ~kamathln/phone_back/backup/mtd1 |
| 11:16.57 | kamathln | checking wiki too |
| 11:18.13 | kamathln | size of the file is 917504 |
| 11:19.45 | ao2 | btw, now that you can enter the bootloader you can dump the kernel with gen-blob following the instructions on the wiki |
| 11:19.51 | ao2 | which are quite tested |
| 11:20.33 | ao2 | ./boot_usb read 0x20000 917504 backup-of-kernel-partition |
| 11:20.42 | ao2 | from http://wiki.openezx.org/Dual_Boot_GEN1 |
| 11:20.55 | ao2 | the file size seems to be ok |
| 11:21.04 | kamathln | cool then.. i wont bother you more .. all the sources, tools, etc are scattered in my home folder .. before I do anything more, I will first rearrange them to be in a handy positions.. |
| 11:21.17 | kamathln | also read up on the wiki .. |
| 11:21.44 | kamathln | Boy! not having a volume control on the phon can teach you so many things |
| 11:21.49 | kamathln | c ya |
| 11:23.09 | *** join/#openezx marex (n=marex@eduroam121.ms.mff.cuni.cz) |
| 11:25.36 | *** join/#openezx florian (n=fuchs@Maemo/community/contributor/florian) |
| 11:28.01 | *** join/#openezx janneg (n=janne@tichy.grunau.be) |
| 11:43.52 | *** join/#openezx kamathln (n=kamathln@122.167.158.85) |
| 12:02.06 | kamathln | ao2: gen-blob not able to find my mmc card |
| 12:03.18 | kamathln | looks like johanbr had the same problem in 2008 |
| 12:44.57 | *** join/#openezx FeLLa (n=46241@mnhm-5f74efa6.pool.mediaWays.net) |
| 12:46.04 | kamathln | jsut passed thought the scare after accidentally putting my phone in passthrough mode |
| 12:46.13 | kamathln | s/thought/through |
| 13:16.34 | kamathln | ao2: fine.. so finally i get to push my own kernels to the phone .. |
| 13:16.49 | kamathln | the default kernel still has trouble booting |
| 13:17.00 | *** join/#openezx marex (n=marex@eduroam121.ms.mff.cuni.cz) |
| 13:17.59 | kamathln | but zImage-2.6.29-rc8 boots up, a few lines pass super fast .. and then wierd stuff happens .. the screen starts to look like audio signals on an old crt tv |
| 13:18.19 | kamathln | ao2: u there? |
| 13:19.03 | kamathln | I dont pass "mem=32M@0xA0000000 mem=16M@0xAC000000 root=3e00" , and it slowly turns white .. sometimes with vertical strps |
| 13:32.54 | kamathln | what is the use of pass through mode? |
| 13:33.38 | kamathln | okei .. got it |
| 13:46.22 | ao2 | hi kamathln you can try also a more recent kernel, see http://people.openezx.org/ao2/images/latest/ |
| 13:46.48 | ao2 | it is recommended you use the latest boot_usb and gen-blob in any case |
| 13:48.58 | kamathln | ao2 : using the latest boot_usb |
| 13:49.26 | kamathln | ao2: using standard boot loader .. does it matter? |
| 13:50.24 | kamathln | i have the gen-blob sources .. I have modified it to what seems to directly put it in usb mode instead of searching for mmc .. |
| 13:50.53 | ao2 | it should work anyway, even if you don't get usb lan. I always load gen-blob first, with a short script |
| 13:50.53 | kamathln | but compiling keeps failing .. so i thought better stick to normal boot loader for now |
| 13:50.59 | ao2 | let me paste it for you |
| 13:53.47 | kamathln | tried booting zImage-2.6.16.13-a780-20060529204745.bin .. was fun - it switched on and left the vibrator running. I think i will use that kernel when I want a massager |
| 13:55.04 | kamathln | ao2 : i started your kernel http://people.openezx.org/ao2/images/latest/zImage-200912031127 |
| 13:55.19 | kamathln | alll it did was turn the screen white with green vertical stripes |
| 13:56.23 | kamathln | should I give those mem=..@.. parameters? |
| 13:58.11 | kamathln | whooppiee.. it worked |
| 13:58.35 | kamathln | now all i need to do is flash some sense into /dev/mmca2 |
| 14:01.08 | ao2 | kamathln, http://pastebin.ca/1708270 |
| 14:01.13 | ao2 | that's what I use |
| 14:03.24 | kamathln | you mean, even when gen-blob is crying that it cant find an mmc, it will be listening and we can tell it tto use the usb instead? |
| 14:05.32 | ao2 | not eactly, you cam make it skip the mmc problem at all, it will read a flag from memory (the "setflag usb" thing) and put itself directly in usb mode. |
| 14:05.43 | ao2 | s/you cam/you can/ |
| 14:06.29 | ao2 | does linux see your card, tho? |
| 14:06.43 | kamathln | ao2: the card, yes .. |
| 14:07.09 | kamathln | ao2: now that you mentioned : the gui had confusions .. |
| 14:07.20 | kamathln | i could see /mmc/mmca1 mounted , even the files |
| 14:07.36 | kamathln | but if I try using the standard phone gui, it would say unformatted disk |
| 14:07.59 | ao2 | unsupported filesystem? I don't know your setup |
| 14:08.14 | ao2 | did you format it with ext2 ? |
| 14:08.21 | kamathln | mmca1 is vfat |
| 14:08.26 | kamathln | mmca2 is ext2 |
| 14:08.47 | ao2 | ah, ok, original firmware can't access ext2 but I think you now that. |
| 14:08.56 | kamathln | i am yet to concentrate on mmca2 |
| 14:09.10 | kamathln | rigth now , I use (GASP) mkezx |
| 14:09.39 | kamathln | this hacking has been pending for more than 2 years |
| 14:09.43 | ao2 | I see, I no ui on openezx, since I only play with kernel for now |
| 14:10.03 | ao2 | s/I no ui/I use no GUI/ |
| 14:10.12 | kamathln | ao2: i am talking of the standard ui that camme with the phone |
| 14:10.27 | kamathln | purl: thx for being the translator :-) |
| 14:11.38 | kamathln | yippee gen-blob in usb mode .. :_) |
| 14:11.40 | kamathln | :-) |
| 14:12.08 | ao2 | good |
| 14:12.11 | kamathln | but sending kernnel got stuck at "Uploading: 12.7%" |
| 14:12.12 | kamathln | :-( |
| 14:12.54 | kamathln | ao2: sending latest kernel by you zImage-200912031127 |
| 14:13.23 | ao2 | mmh, try editing boot_usb decommenting #define USECS_SLEEP 500 |
| 14:13.37 | ao2 | don't forget to recompile boot_usb |
| 14:13.49 | kamathln | :) |
| 14:15.02 | ao2 | I am sorry if I say something trivial sometimes :) |
| 14:15.48 | kamathln | ao2: not your fault I have #defined kamathln as noob.. |
| 14:15.56 | kamathln | yeah booted |
| 14:16.00 | kamathln | aswesome |
| 14:16.28 | kamathln | ao2: I wouldnt be surprised if you boot a phone with half parts on earth and remaining on the moon |
| 14:16.44 | ao2 | some usb hosts on PC are a bit flckey |
| 14:16.57 | kamathln | asus eee 904ha here |
| 14:17.11 | ao2 | flakey, even |
| 14:17.23 | kamathln | hehheh |
| 14:18.58 | kamathln | http://people.openezx.org/ao2/images/minimal-fso-console-image-glibc-ipk-.dev-snapshot-20090321-a780.rootfs.tar.gz works? |
| 14:20.01 | ao2 | it should, no GUI, you've been warned, only text console |
| 14:20.10 | ao2 | I use it connecting to the phoen via ssh |
| 14:20.14 | kamathln | has telnet or ssh> |
| 14:20.24 | kamathln | ha! thats more than enough for now |
| 14:20.36 | kamathln | does the kernel have good usb support? |
| 14:20.45 | kamathln | usb client or otg |
| 14:21.19 | ao2 | usblan gadget works, we could also have usb host, but this is not coded for gen1 phones for now |
| 14:21.38 | kamathln | ao: oh! |
| 14:21.51 | kamathln | you mean the usb part is really flexible? |
| 14:22.14 | ao2 | on gen2 it works quite well, folks here connected a powered usb hub to the phone with keyboards, or usb wifi adapters |
| 14:23.34 | kamathln | I had discarded this project 2 years ago.. but meeting shmidcht(am I spelling that right) face to face at foss.in was a moral boost |
| 14:24.12 | kamathln | and of course Herald and the others .. Cant exactly recollect who |
| 14:24.32 | ao2 | stefan schmidt |
| 14:24.40 | ao2 | and it's Harald, btw :) |
| 14:24.40 | kamathln | yeha |
| 14:24.57 | kamathln | urgh .. need to get western names right .. |
| 14:25.34 | ao2 | kamathln, where are you from, if I can? |
| 14:25.44 | kamathln | India |
| 14:26.12 | kamathln | bleet bleet |
| 14:26.32 | ao2 | Indian names are really hard for us, so don't worry :) |
| 14:27.43 | kamathln | ao2: You bet!! My name is Laxminarayan |
| 14:27.48 | kamathln | and thats just my first name |
| 14:28.54 | ao2 | sounds like a medicine to my dumb Italian ears :) |
| 14:29.39 | ao2 | just joking, I don't think you'll get offended :) |
| 14:30.19 | kamathln | naah |
| 14:30.51 | kamathln | Laxminarayan Govindraj Kamath Ammembal .. how does that sound .. |
| 14:31.18 | kamathln | fso-console image is 8 more minutes away |
| 14:31.25 | kamathln | 32 KiB/ps |
| 14:31.54 | kamathln | 32 KiB/s |
| 14:42.29 | kamathln | making file system on mmca2 .. should I make it ext2 or ext3 ? |
| 14:42.50 | ao2 | ext2 is ok |
| 14:44.27 | kamathln | yippee! the image contains python too! |
| 14:45.03 | ao2 | :) |
| 14:49.45 | ao2 | ah, to make usblan work you have to disconnect and reconnect the usb cable after phone boot |
| 14:53.09 | kamathln | ao2 : before that .. searching gfor root= option to make it boot from mmc .. right now it is searching for root on "(0,0)" ramdisk if I am not wrong |
| 14:54.31 | kamathln | "(0,0)" is zero comma zero .. not some chinese or japanese emoticon |
| 14:56.35 | ao2 | with the kernel from people.openezx.org it will search on /dev/mmcblk0p2, which is the second partition on the transflash card |
| 14:58.59 | ao2 | just check you partition scheme, someone had issues using 'parted' to partition the card, but that was some time ago. |
| 14:59.20 | ao2 | never had issues using fdisk |
| 15:00.24 | kamathln | I use fdisk .. |
| 15:01.05 | kamathln | it says "Cannot open root device "<NULL>" or unknown-block (0,0) |
| 15:01.36 | kamathln | okie trying to boot with root=/dev/mmcblk0p2 |
| 15:03.06 | kamathln | it still sayes the same |
| 15:03.21 | kamathln | should I jsut got for ext3 ? |
| 15:03.50 | ao2 | I don't think that's the problem |
| 15:03.55 | kamathln | or is there any other root=? |
| 15:04.16 | kamathln | is the 4 digit hex the minor and major number? |
| 15:05.23 | ao2 | kamathln, yes, "%02x%02x" % (major, minor) |
| 15:06.13 | ao2 | kamathln, are you using the default cmdline? |
| 15:06.48 | kamathln | yes |
| 15:07.15 | kamathln | well, I am adding "mem=32M@0xA0000000 mem=16M@0xAC000000" |
| 15:07.20 | kamathln | wait .. |
| 15:07.37 | kamathln | there was a space between root= and /dev/mtd... |
| 15:08.01 | ao2 | you can also avoid passing a command line at all from boot_usb |
| 15:08.11 | ao2 | then the one provided by the kernel will be used |
| 15:09.03 | kamathln | yes.. but if I dont give those mem= params .. all the kernel does is give me ideas for t-shirt stripes |
| 15:09.21 | ao2 | even when you load gen-blob first? |
| 15:09.32 | kamathln | err.. no |
| 15:09.38 | kamathln | i didnt check that |
| 15:09.49 | kamathln | :-( .. was not doing that to save time |
| 15:10.09 | kamathln | downlaoded expect .. will learn and improve the script first |
| 15:10.47 | kamathln | i first need to go into minicom, put in usblan mode, assign ip, route, then telnet, login, and then call bp_command |
| 15:10.51 | ao2 | Well, once things work you won't mind a couple of seconds more to boot :) |
| 15:10.52 | kamathln | then use boot_usb |
| 15:11.14 | kamathln | I would be a few years behind without commandd history |
| 15:11.27 | ao2 | kamathln, you could setup a loadlin script that calls bp_command |
| 15:12.46 | kamathln | ao2: again, No sim .. it waits asking whether to turn off the antenna.. by then, i would be typing ./bp_command |
| 15:12.51 | kamathln | in telnet |
| 15:13.10 | kamathln | minicom starts working long before the boot anim is done |
| 15:13.51 | kamathln | well, never mind that .. i am ready to go through all that .. also, this will be a nice chance to learn expect |
| 15:14.29 | kamathln | root= with /dev/mmcblk0p2 does not work .. it does not know what mmcblk0p2 is .. |
| 15:14.45 | ao2 | I see. about minicom, you could replace it with "echo", it works on a910 here echo -e "AT+mode=99\r\n" > /dev/ttyACM0 |
| 15:15.51 | kamathln | I never had good luck with echo |
| 15:16.02 | ao2 | kamathln, openezx kernel should know what it is, just check if the card is inserted properly (again, trivial advice) |
| 15:16.07 | kamathln | i could use it instead of tossing a coin |
| 15:16.21 | kamathln | it is inserted properly |
| 15:16.39 | kamathln | I will confirm at next telnet though |
| 15:17.05 | ao2 | ah, you're now trying the gen-blob way, right? |
| 15:18.15 | kamathln | tried gen-blob way too .. even that started giving me stripes |
| 15:18.49 | kamathln | The camera on my phone is gone .. should tthat matter? |
| 15:19.03 | ao2 | shouldn't matter |
| 15:20.11 | kamathln | the sd card is inserted .. i gget mmca1 and mmca2 in /proc/partitions |
| 15:20.34 | ao2 | I have no more ideas offhand, If something come up to my mind I'll tell you |
| 15:20.45 | kamathln | sure thing .. |
| 15:21.07 | kamathln | the last help you might be able to do is give me the major and minor numbers of mmca2 |
| 15:21.32 | kamathln | doh! its 243 and 2 .. i have it byheart! |
| 15:22.16 | kamathln | i must be passiing root=f302 right? |
| 15:22.38 | ao2 | exactly |
| 15:23.24 | kamathln | nope .. it still says unknown block .. |
| 15:23.39 | kamathln | if everything else fails, will try with ext3 partition.. |
| 15:23.56 | kamathln | and if that fails too, will make an initrd with all the modules |
| 15:24.04 | ao2 | paste the whole cmdline here |
| 15:25.14 | kamathln | ./boot_usb zImage-200912031127 1740 "mem=32M@0xA0000000 mem=16M@0xAC000000 root=f302" |
| 15:25.17 | kamathln | is the last one |
| 15:25.34 | ao2 | add rootdelay and rootfstype too |
| 15:26.08 | ao2 | rootfstype=ext2 rootdelay=3 |
| 15:26.44 | kamathln | rootfstype, I get .. rootdelay? |
| 15:29.36 | kamathln | okie .. it still failed .. but now lists mmcblk0p2 |
| 15:29.41 | kamathln | lemme try that |
| 15:29.45 | kamathln | agian.. |
| 15:30.15 | ao2 | increase rootdelay to 5 maybe |
| 15:32.04 | kamathln | and we have Init !! whoopiiee! |
| 15:32.52 | ao2 | very good |
| 15:32.58 | ao2 | now have fun! :) |
| 15:33.16 | kamathln | yeah! |
| 15:33.25 | kamathln | Dinners gonna be tastier |
| 15:34.47 | ao2 | that's reminds me that I need to learn more about Indian food :) |
| 15:35.13 | ao2 | s/'s// |
| 15:35.56 | kamathln | purl is a bot?? |
| 15:36.14 | kamathln | s/hi/ha/ |
| 15:36.33 | kamathln | purl: help |
| 15:36.42 | kamathln | doh! |
| 15:37.44 | ao2 | yes, it's a bot |
| 15:39.56 | kamathln | the phone gets an ip of |
| 15:39.58 | kamathln | ? |
| 15:40.55 | kamathln | okei .. off for dinner |
| 15:43.22 | ao2 | ip should be 192.168.0.202 and expect usb0 on host to be 192.168.0.200 |
| 15:44.25 | ao2 | you can pass ip on CMDLINE as well if something fails in setup from userspace |
| 15:57.29 | kamathln_dinner | back |
| 15:57.51 | kamathln_dinner | okie |
| 16:01.13 | *** join/#openezx johanbr (n=j@blk-222-118-50.eastlink.ca) |
| 16:14.42 | *** join/#openezx janneg (n=janne@tichy.grunau.be) [NETSPLIT VICTIM] |
| 16:14.42 | *** join/#openezx marex (n=marex@eduroam121.ms.mff.cuni.cz) |
| 16:14.42 | *** join/#openezx johanbr (n=j@blk-222-118-50.eastlink.ca) [NETSPLIT VICTIM] |
| 16:14.42 | *** join/#openezx ao2 (n=u@2001:1418:117:0:0:0:0:1) [NETSPLIT VICTIM] |
| 16:14.42 | *** join/#openezx shoragan (n=shoragan@debian/developer/shoragan) |
| 16:14.42 | *** join/#openezx parmaster (i=par@dipole.idlepattern.com) [NETSPLIT VICTIM] |
| 16:15.33 | *** join/#openezx punkass (i=rad@unaffiliated/punkass) [NETSPLIT VICTIM] |
| 16:15.33 | *** join/#openezx EuroTrash (n=rtrsh@82-169-3-152.ip.telfort.nl) [NETSPLIT VICTIM] |
| 16:25.28 | *** join/#openezx marex (n=marex@eduroam121.ms.mff.cuni.cz) |
| 16:28.54 | kamathln | ao2: ip is 192.168.129.201 host 192.168.129.200 |
| 16:30.06 | ao2 | so fso-console-image is setting the ip to something different from what we are using in kernel CMDLINE .202? I'll check that |
| 16:30.12 | kamathln | looks like my network h/w is some "obsolete" Zaurus 2.4 Lineo net_fd; |
| 16:30.53 | kamathln | cmdline?? llooks more like its coming from /etc/network/interfaces .. from where i guessed it |
| 16:32.37 | ao2 | the one you are using is from /etc/network/interfaces, the one I am using is from CMDLINE from the kerenl image |
| 16:33.16 | ao2 | so the interface is seen as usbd0 on the phone, not a big deal |
| 16:36.23 | kamathln | yeah.. but just told you .. jsut in case |
| 16:37.00 | kamathln | so , there is no password, and I need to install a public key ? |
| 16:38.38 | kamathln | hmm.. then so be it |
| 17:08.25 | kamathln | ao2: I had got it all wrong .. sratch whatever i said about ethernet |
| 17:14.22 | kamathln | ao2: I have been trying to ssh all along .. |
| 17:14.34 | kamathln | then i checked the messages on the phone |
| 17:14.43 | ao2 | I'll be back in 3 hours, sorry |
| 17:16.10 | kamathln | hey! no probs |
| 17:16.11 | kamathln | i will be asleep by then |
| 17:16.11 | kamathln | c ya :-) |
| 18:28.24 | *** join/#openezx toi (n=toi@d54C2A96D.access.telenet.be) |
| 18:38.37 | *** join/#openezx marex (n=marex@eduroam121.ms.mff.cuni.cz) |
| 18:56.42 | *** join/#openezx johanbr (n=j@JBrannlund2.MathStat.Dal.Ca) |
| 19:14.46 | *** join/#openezx yang (n=yang@boneym.v6.mtveurope.org) |
| 19:57.37 | *** join/#openezx l403 (n=l@85.132.159.239) |
| 20:13.41 | *** join/#openezx marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 20:34.08 | *** join/#openezx Simon- (i=simon@proxima.lp0.eu) |
| 20:38.38 | *** join/#openezx florian (n=fuchs@Maemo/community/contributor/florian) |
| 21:33.12 | *** join/#openezx flo_lap (n=fuchs@Maemo/community/contributor/florian) |
| 21:40.06 | *** join/#openezx CIA-20 (n=CIA@208.69.182.149) |
| 21:59.13 | *** join/#openezx ChanServ (ChanServ@services.) |
| 21:59.13 | *** mode/#openezx [+o ChanServ] by irc.freenode.net |