| 00:08.19 | CIA-20 | Daniel Ribeiro <drwyrm@gmail.com> ezx/current * c093dd9a75 openezx/arch/arm/mach-pxa/ezx.c: move diff chunk 3 to ezx/mach/gpio |
| 00:08.29 | CIA-20 | Daniel Ribeiro <drwyrm@gmail.com> ezx/current * fd1a6a5074 openezx/arch/arm/mach-pxa/ezx.c: move from ezx/mach/camera and propagate change to gen1 pin config |
| 00:15.59 | CIA-20 | Daniel Ribeiro <drwyrm@gmail.com> ezx/current * 09c68074fe openezx/arch/arm/configs/ezx_defconfig: Automatic defconfig update |
| 00:57.53 | *** join/#openezx johanbr (n=j@blk-7-131-98.eastlink.ca) |
| 01:13.18 | tmzt | WyrM: the tg update worked, but I have not integrated eoc yet. I need to do a few things and then I will be able to do that |
| 01:13.34 | WyrM | tmzt: ok. |
| 01:50.06 | *** join/#openezx LoneStar (n=xinzhen@218.80.193.59) |
| 02:07.54 | WyrM | tmzt: the recent commit from ao2, about the a910 camera will also benefit the motoq. |
| 02:08.00 | WyrM | tmzt: it's the same sensor. |
| 02:08.47 | tmzt | ezx/mach/camera ? tg |
| 02:09.10 | WyrM | yes, and probably you will also need the ezx/mt9m111-fix |
| 02:09.15 | WyrM | to fix a driver issue. |
| 02:09.15 | WyrM | :) |
| 02:09.24 | tmzt | did the android release help with that? |
| 02:09.32 | WyrM | no. |
| 02:09.58 | WyrM | IIRC its code from Robert Jarzmik, for the Mio A701 smartphone. |
| 02:10.28 | tmzt | oh, I thought the g1 used a similar chip, but they haven't release all the image format stuff |
| 02:15.46 | tmzt | ali1234 said the was a release for an omap motorola phone a810? did you see that? |
| 02:16.03 | WyrM | release where? |
| 02:16.08 | tmzt | https://opensource.motorola.com/sf/frs/do/listReleases/projects.a810/frs.a810 |
| 02:16.08 | WyrM | opensource.motorola? |
| 02:16.30 | tmzt | I'm waiting for packet tracer for linux (cisco) to extract then I need to do some labs |
| 02:16.47 | WyrM | ahh, the e28, I've seen this release already |
| 02:16.56 | WyrM | this phone was not designed by motorola. |
| 02:17.03 | WyrM | only branded. :) |
| 02:17.08 | tmzt | it's like there silent release of razr2v8 earlier this year |
| 02:17.30 | tmzt | that makes sense, because he called it e28 and I thought that code was from purple labs |
| 02:18.07 | tmzt | there is modem interface code for omap that may help on htc devices |
| 02:18.53 | WyrM | good. |
| 02:19.30 | tmzt | I'm thinking maybe gsm q and q9 are omap and the cdma versions are pxa, but I need to research this |
| 02:22.33 | abram | tmzt, /offtopic/ packet tracer works under wine jst fine |
| 02:23.07 | tmzt | abram: yeah, I used 4.2 that way, haven't tried 5 with it since I saw a linux package |
| 02:24.14 | tmzt | abram: do you know if there is any way to telnet or connect to a pty for the devices in packet tracer? outside of the program |
| 02:27.16 | CIA-20 | Daniel Ribeiro <drwyrm@gmail.com> ezx/current * 5cd5d743e3 openezx/arch/arm/mach-pxa/ezx.c: move e6 pin configuration to ezx/mach/gpio |
| 02:27.17 | CIA-20 | Daniel Ribeiro <drwyrm@gmail.com> ezx/current * bf62a2cb36 openezx/arch/arm/configs/ezx_defconfig: manual review of .config |
| 02:27.17 | CIA-20 | Daniel Ribeiro <drwyrm@gmail.com> ezx/current * 5bc434dd9d openezx/arch/arm/mach-pxa/ezx.c: move e6_pin_config from ezx/mach/keypad |
| 02:27.18 | CIA-20 | Daniel Ribeiro <drwyrm@gmail.com> ezx/current * 6a91f57fff openezx/.topmsg: update patch description |
| 02:27.20 | CIA-20 | Daniel Ribeiro <drwyrm@gmail.com> ezx/current * 5a8ce0ed7a openezx/arch/arm/mach-pxa/ezx.c: add e2_pin_config for the keypad gpios |
| 02:27.23 | CIA-20 | Daniel Ribeiro <drwyrm@gmail.com> ezx/current * ab1afd4f50 openezx/arch/arm/mach-pxa/ezx.c: remove a blank line |
| 02:27.26 | CIA-20 | Daniel Ribeiro <drwyrm@gmail.com> ezx/current * 8ac2f1334c openezx/.topmsg: update patch description |
| 02:30.40 | sabrod | <PROTECTED> |
| 02:31.09 | WyrM | sabrod: yes, but not for what you want :) |
| 02:31.12 | sabrod | <PROTECTED> |
| 02:31.32 | sabrod | queuing/sharing tests? |
| 02:31.36 | WyrM | I mean, it uses the ssp controller, but not the ssp port 1 (which is what you want) |
| 02:32.01 | sabrod | Ah, so modem comunications? |
| 02:32.16 | WyrM | the ssp port 1 is shared on the a910, between PCAP and the mmc card. |
| 02:33.55 | WyrM | so, the best stress test you can create is like: |
| 02:33.55 | WyrM | while true; do |
| 02:33.55 | WyrM | dd if=dev/zero of=/test-filesync; rm -f |
| 02:33.58 | WyrM | oops |
| 02:34.06 | WyrM | while true; do |
| 02:34.25 | WyrM | dd if=/dev/zero bs=1024 count=1024 of=/test-file |
| 02:34.33 | WyrM | sync |
| 02:34.34 | *** part/#openezx BadCluster (n=badclust@190.50.176.244) |
| 02:34.35 | WyrM | done |
| 02:34.43 | *** join/#openezx BadCluster (n=badclust@190.50.176.244) |
| 02:34.45 | WyrM | simultaneously with |
| 02:35.20 | WyrM | while true; do cat /sys/class/<I don't remember the correct path>/adc_*; done |
| 02:35.41 | WyrM | the pcap adc sysfs files. |
| 02:36.04 | tmzt | spi/devices/spi1.0 |
| 02:36.08 | WyrM | this will certainly cause corruption and will likely cause a crash. |
| 02:36.51 | sabrod | ok, I will try that, thanks ... |
| 02:37.29 | sabrod | not if some patches work for us... |
| 02:37.30 | WyrM | a more inteligent test would copy some random file, and after the copy compare it with the original, so you can see data corruption. |
| 02:37.50 | sabrod | :) |
| 02:38.57 | sabrod | I found a lot of fixes for that problem, it seems to be an old and persistent one :( |
| 02:39.43 | WyrM | yes, still nothing acceptable for mainline, I read spi-devel regularly waiting for a patch to solve this issue on mmc_spi. |
| 02:40.48 | tmzt | do a lot of the ezx's use mci for sdio(wifi) or something? why are they using spi for mmc? |
| 02:41.13 | WyrM | exactly because of the wifi :) |
| 02:41.25 | WyrM | the only phones that uses mmc_spi is a910. |
| 02:41.29 | tmzt | same as moko then, using the glamo for sd |
| 02:41.29 | sabrod | I think it's because of the wifi sdio chip...libertas |
| 02:41.46 | tmzt | oh, you have a driver for that working? |
| 02:41.51 | WyrM | yes. |
| 02:42.18 | WyrM | the mainline driver works, we just power up the sdio card with pcap |
| 02:42.19 | tmzt | the palmtx uses a libertas and they are having trouble with loading the code into it |
| 02:43.02 | sabrod | mainline and the "firmware" is on a910 motorola.sourceforge . in kernel sources. |
| 02:43.23 | tmzt | which libertas is it? |
| 02:44.04 | sabrod | sd 8385 |
| 02:45.07 | WyrM | tmzt: https://lists.gnumonks.org/pipermail/openezx-devel/2008-April/001892.html |
| 02:46.48 | tmzt | I guess miknix is gone |
| 02:48.04 | WyrM | palm people are usually on #hackndev |
| 02:48.21 | tmzt | on freenode, I thought they had their own irc |
| 02:49.14 | WyrM | yes, on freenode. |
| 02:55.01 | tmzt | so I should look at the tg patch ezx/eoc and intergrate that in motoq.c ? |
| 02:55.15 | WyrM | tmzt: no. |
| 02:55.25 | WyrM | tmzt: it currently uses no platform data. |
| 02:55.43 | tmzt | no add_devices either? |
| 02:56.03 | WyrM | only the i2c_board_info is needed. |
| 02:56.53 | WyrM | look for "ezx-eoc" on 'tg patch ezx/mach/i2c' |
| 02:57.35 | WyrM | have you looked at your i2cbus with i2cdump? |
| 02:57.40 | WyrM | do you have 0x17? |
| 02:57.42 | tmzt | +static struct i2c_board_info __initdata e680_i2c_board_info[] = { |
| 02:57.42 | tmzt | + { I2C_BOARD_INFO("lm4857", 0x7c) }, |
| 02:57.42 | tmzt | + { I2C_BOARD_INFO("tea5767", 0x81) }, |
| 02:57.58 | tmzt | no, I need to get a root/install that package |
| 02:58.21 | WyrM | the a910_i2c_board_info is better for you to base on. |
| 02:59.45 | WyrM | tmzt: also, you will need to change ezx-eoc.c the irq used on ezx is gpio10. |
| 03:00.08 | WyrM | (00:48:34) WyrM: what wifi chip is used on palmtx? |
| 03:00.08 | WyrM | (00:59:46) BobOfDoom: SyChip 6064... which is based on the Marvell 88W8381 |
| 03:01.27 | WyrM | (01:00:34) WyrM: BobOfDoom: is it sdio? |
| 03:01.27 | WyrM | (01:00:49) tmzt [n=tmzt@adsl-99-155-214-182.dsl.akrnoh.sbcglobal.net] entrou na sala. |
| 03:04.00 | WyrM | so, it's a CF wifi on palmtx. |
| 03:04.13 | WyrM | not a SDIO libertas. |
| 03:17.39 | tmzt | portugues, not one I know ) |
| 03:18.20 | WyrM | if you know spanish you will be able to understand most of it :) |
| 03:18.46 | tmzt | well, not well |
| 03:19.10 | tmzt | don't know spanish very well either, but recognize conjugates and conjugates of spanish words |
| 03:19.49 | WyrM | americans don't need to learn another language. the whole world speaks english :) |
| 03:19.50 | tmzt | yeah, I forgot that was pcmcia, but I've heard most of them called libertas |
| 03:20.14 | tmzt | didn't start earlier enough, and haven't put in enough effort |
| 03:21.32 | tmzt | anyway, my microSD card reader is not working so I need to find the sd one |
| 03:21.50 | tmzt | but I have a i2ctools binary that might work, if it's the right isa |
| 04:09.53 | *** join/#openezx pixel__ (i=nobody@dslc-082-082-091-184.pools.arcor-ip.net) |
| 05:57.12 | tmzt | WyrM: I think I'm getting tired, can't get an initramfs to boot now |
| 05:57.35 | tmzt | but, how do I enable i2cdump to work, changes to ./.config ? |
| 06:07.01 | *** join/#openezx the_mgt_ (n=ich@dslb-082-083-207-199.pools.arcor-ip.net) |
| 07:02.20 | *** join/#openezx LoneStar (n=xinzhen@218.80.193.59) |
| 07:34.59 | *** join/#openezx mdancer (n=mdancer@195.222.67.205) |
| 07:54.05 | mdancer | Hi all. I want to try lastest ezx sources, but I not familiar with git. |
| 07:54.13 | mdancer | I've done the following: |
| 07:54.22 | mdancer | git-clone git://git.openezx.org/openezx.git |
| 07:54.22 | mdancer | tg remote --populate origin |
| 07:54.22 | mdancer | git-checkout ezx/current |
| 07:54.35 | mdancer | as I see in your irclogs. |
| 07:54.52 | mdancer | And after that in my openezx folder there are no ezx files, exept in .git folder |
| 07:56.30 | mdancer | So, what thing I miss? |
| 08:00.52 | *** join/#openezx jonwil (n=jonwil@123-243-219-11.tpgi.com.au) |
| 08:01.20 | jonwil | hi |
| 08:01.36 | jonwil | Aparently Motorola is abandoning EZX and MAGX in favor of Android |
| 08:01.40 | jonwil | http://www.engadget.com/2008/10/29/motorola-expected-to-cut-more-jobs-as-it-simplifies-around-andro/ |
| 08:40.01 | *** join/#openezx mdancer (n=mdancer@195.222.67.205) |
| 08:51.20 | *** join/#openezx mdancer (n=mdancer@195.222.67.205) |
| 08:54.53 | CIA-20 | stefan * 2353 /trunk/homepage/xml/ (index.xml news.xml): homepage: News about topgit enabled tree |
| 08:57.28 | CIA-20 | stefan * 2354 /trunk/homepage/xml/ (index.xml news.xml): homepage: Add a comma |
| 09:11.55 | *** join/#openezx ao2 (n=u@2001:1418:117:0:0:0:0:1) |
| 09:12.36 | *** join/#openezx droebje (n=quirc@92.117.133.153) |
| 09:32.08 | *** join/#openezx broedje (n=quirc@92.116.75.121) |
| 10:09.48 | *** join/#openezx florian__ (n=fuchs@217.146.132.69) |
| 10:28.14 | *** join/#openezx LoneStar (n=xinzhen@218.80.193.59) |
| 10:47.59 | *** join/#openezx ade|desk (n=adavey@195.153.131.254) |
| 11:21.21 | *** join/#openezx borman999 (n=quassel@ppp91-76-214-233.pppoe.mtu-net.ru) |
| 12:00.00 | *** join/#openezx gmzhuo (n=gmzhuo@118.113.160.45) |
| 12:01.05 | *** part/#openezx Fosforo (n=Fosforo@20151123218.user.veloxzone.com.br) |
| 12:38.12 | *** join/#openezx BadCluster (n=badclust@190.50.213.121) |
| 12:38.15 | *** part/#openezx BadCluster (n=badclust@190.50.213.121) |
| 12:46.03 | *** join/#openezx johanbr (n=j@JBrannlund2.MathStat.Dal.Ca) |
| 13:04.29 | *** join/#openezx jonwil (n=jonwil@123-243-219-11.tpgi.com.au) |
| 13:05.34 | jonwil | hi |
| 13:23.27 | *** join/#openezx SuN (i=unices@82-170-225-106.ip.telfort.nl) |
| 13:31.25 | jonwil | looks like ezx and magx are dead |
| 13:31.28 | jonwil | or will be |
| 13:41.25 | *** join/#openezx WM (i=c88e3a12@gateway/web/ajax/mibbit.com/x-134e872ccafef23f) |
| 13:52.38 | gmzhuo | Hi,WM |
| 14:13.44 | WM | hi gmzhuo :) |
| 14:17.56 | gmzhuo | Bp don't works on the newest kernel now,it cause panic |
| 14:19.47 | gmzhuo | WM,how to avoid read&write UHCRHPS3 in ts0710_mux_usb.c directly? |
| 14:21.06 | WM | hum.. |
| 14:21.18 | WM | your problem is because an api change on pxa? |
| 14:21.32 | WM | UHCRHPS3 dont exist anymore? |
| 14:22.31 | WM | happened recently with the DRCMR registers, i changed it on pxa2xx-ssp and pxa-ssp. |
| 14:23.42 | gmzhuo | I mean it is worse to read&write register in a usb device driver.ofcause UHCRHPS3 don't exist is one reason |
| 14:27.18 | gmzhuo | And if I access UP3OCR direct in ezx_ohci_init will cause panic too |
| 14:49.04 | *** join/#openezx LoneStar (n=xinzhen@114.92.179.21) |
| 14:49.56 | WM | gmzhuo: hum... i need to investigate this. |
| 14:51.30 | ao2 | as a side note, id would be good to remove references to UHCRHPS3 hadcoded in the driver also to make ts0710 portable to other architectures. It compiled fine on x86 without those calls IIRC. gmzhuo what about replacing those writes with functions that one can set via platform data? Is UHCRHPS3 only used for suspend/resume? Yes I know that I am just adding questions without aswering to what you asked :) |
| 14:52.21 | *** join/#openezx borman999 (n=quassel@ppp91-76-214-233.pppoe.mtu-net.ru) |
| 15:05.23 | *** part/#openezx ade|desk (n=adavey@195.153.131.254) |
| 15:08.17 | *** join/#openezx borman999 (n=quassel@ppp91-76-214-233.pppoe.mtu-net.ru) |
| 15:40.24 | *** join/#openezx neolynx (n=u@32-123-204-62-pool.dsl.fcom.ch) |
| 15:45.56 | *** join/#openezx WyrM (n=wyrm@189.13.101.245) |
| 15:50.00 | *** join/#openezx SuN (i=unices@82-170-225-106.ip.telfort.nl) |
| 16:10.59 | *** join/#openezx SuN (i=unices@82-170-225-106.ip.telfort.nl) |
| 16:37.09 | *** join/#openezx pH5 (n=ph5@e178215250.adsl.alicedsl.de) |
| 16:41.14 | *** join/#openezx ao2 (n=u@2001:1418:117:0:0:0:0:1) [NETSPLIT VICTIM] |
| 16:41.14 | *** join/#openezx alphaone (n=alphaone@2001:638:602:af01:0:0:0:1) |
| 16:41.14 | *** join/#openezx NiZoX (n=none@2a01:e35:8a13:a2b0:21c:c0ff:fe25:ff68) |
| 16:41.14 | *** join/#openezx file (n=file@asterisk/developer-and-muffin-lover/file) |
| 16:41.14 | *** join/#openezx shoragan (n=shoragan@debian/developer/shoragan) |
| 16:46.51 | *** join/#openezx borman999 (n=quassel@ppp83-237-168-126.pppoe.mtu-net.ru) |
| 16:48.20 | johanbr | sabrod: Did you have any more luck with your card testing? |
| 16:48.48 | *** join/#openezx SuN|2 (i=unices@82-170-225-106.ip.telfort.nl) |
| 17:13.34 | *** join/#openezx flyhorse|linux (n=flyhorse@116.18.197.164) |
| 17:17.46 | *** join/#openezx pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 17:41.29 | *** join/#openezx Wyr1 (n=wyrm@189.13.114.207) |
| 18:05.36 | *** join/#openezx tombhadAC (n=tombhad@pD95DECA1.dip.t-dialin.net) |
| 18:19.10 | *** join/#openezx arsen420 (n=arsen420@216.143.94.9) |
| 18:22.21 | sabrod | johanbr: none of my cards gave me a CMD41 : 0x8******* , no . It seems I bought some bad cards... |
| 18:23.36 | johanbr | Well, they work when you boot the kernel over usb, right? |
| 18:23.46 | sabrod | Perhaps it's sd 2.0 norm that is unsupported... |
| 18:24.28 | johanbr | And Wyrm said he had a card identical to one of mine (Sandisk 2 gig) that works for him. |
| 18:24.51 | sabrod | Yes but with gen-blob, wyrm had to use some 2.4 code... I believe 2.6 kernel can perhaps even power up sdhc cards :) |
| 18:25.13 | johanbr | right |
| 18:26.10 | johanbr | Wyr1: Would it be possible to change gen-blob to be more like the 2.6 driver? |
| 18:28.01 | sabrod | BTW, I found a 2,4 code that support SDHC : http://open2x.svn.sourceforge.net/viewvc/open2x/trunk/kernel/linux-open2x-2.4.26_FW2-3/drivers/mmcsd/mmcsd_bus.c?revision=252&view=markup |
| 18:29.36 | sabrod | Heh, for the record, but I believe hardly modding the stock rootfs and having 2 or 3 kernel in the NOR should not cause a lot of problems for future openezx users :) |
| 18:39.05 | *** join/#openezx yansa (n=yans@89.108.200.3) |
| 18:42.58 | *** join/#openezx droebje (n=quirc@92.117.198.190) |
| 18:50.57 | WM | johanbr, sabrod: there are 2 different issues with your cards. |
| 18:51.41 | WM | johanbr´s card, and some cards from sabrod, dont reply as expected to CMD_APP which is the second CMD sent to initialize SD cards. |
| 18:52.23 | WM | i dont know why, probably something wrong with controller configuration, or power issues. |
| 18:53.12 | tmzt | WM, hey my 4g card isn't working. I thought it was the card reader but it seems to be the card. Is there something we could have done to cause this (I just want to keep it from happening again if its still in the kernel)? |
| 18:53.39 | WM | some cards from sabrod works fine up to SD_SEND_OP_COND, which is the third command to initialize the card, after this command sd clears the busy flag and the card is ready. |
| 18:53.55 | WM | tmzt: unlikely. |
| 18:54.22 | tmzt | the vdd wouldn't be a problem? I must have just spiked it (static) or something |
| 18:54.22 | WM | tmzt: we dont even messed with card voltage on our tests. once we turned off the card power, but it would not damage your card. |
| 18:54.56 | WM | tmzt: at which point does your card fail? |
| 18:54.59 | tmzt | I just need to keep my data and fs's seperate now |
| 18:55.00 | johanbr | WM: Would it be possible to add some debug statements to the 2.6 kernel code and use that to modify gen-blob? |
| 18:55.33 | tmzt | well, I need to get a direct mmc connection from something to find out. linux (ezx) is returning -110 and two different usb readers have reset |
| 18:55.43 | WM | johanbr: well, it wouldnt make a difference, the code to initialize the card, altough it is based on 2.4 is the same as 2.6 (regarding the card pov). |
| 18:55.52 | sabrod | It reminds me my integrated TI card reader, i never could read sdhc with it, even if it's a modern reader... but I think the sdhci team have found a workaround nowadays ... |
| 18:56.51 | johanbr | WM: In that case, why can I start gpe from the card, after I boot the kernel over usb? |
| 18:57.02 | WM | (almost the same, as gen-blob doesnt support mmc initialization). |
| 18:57.11 | WM | i really dont know. :/ |
| 18:58.04 | WM | but yes, you can compile a 2.6 kernel with CONFIG_MMC_DEBUG, and send me the output, and i can check it against what i do on gen-blob. |
| 18:58.30 | johanbr | Alright, I'll give that a try when I have some time. Probably next week... |
| 19:04.42 | WM | is going home. |
| 19:04.43 | WM | bbl |
| 19:23.58 | *** join/#openezx sabrod (n=mac@lns-bzn-37-82-253-62-117.adsl.proxad.net) |
| 19:44.34 | *** join/#openezx droebje (n=quirc@92.116.27.9) |
| 19:45.28 | droebje | I WANT TO CODE |
| 19:48.01 | abram | WOW |
| 19:48.06 | abram | droebje, do it, faggot! |
| 19:56.36 | Wyr1 | what was that? |
| 19:56.38 | Wyr1 | :) |
| 19:57.44 | tmzt | WyrM? |
| 19:57.56 | WyrM | yes. |
| 19:58.58 | tmzt | nothing can read my 4g so it is officially dead. it just puts me back to finding something else to boot from, that's all |
| 19:59.18 | tmzt | so I still haven't got the i2cdump |
| 20:01.33 | WyrM | tmzt: sorry for your card. |
| 20:05.04 | *** join/#openezx droebje (n=quirc@92.116.166.149) |
| 20:05.14 | WyrM | droebje: hi. |
| 20:08.51 | tmzt | droebje: code what? |
| 20:15.53 | WyrM | wants to code too! |
| 20:19.41 | droebje | well of course about the matchbox-k |
| 20:19.49 | droebje | xstroke |
| 20:20.25 | WyrM | droebje: what is this matchbox-k/xstroke thing? |
| 20:20.54 | droebje | HWR |
| 20:21.19 | droebje | -k |
| 20:22.10 | droebje | matchbox-xstroke or stroke or alike dunno |
| 20:22.47 | droebje | i leann |
| 20:23.01 | droebje | i learn C atm |
| 20:24.12 | tmzt | gestures/handwritting recognition |
| 20:24.38 | tmzt | look at the qt extended release, I think they have a handwritting thing? |
| 20:25.35 | tmzt | don't know how that is openezx specific though |
| 20:26.33 | droebje | yea...what is its name? |
| 20:26.54 | droebje | and where is an qt eh |
| 20:27.26 | droebje | xtended release? where can i get it? Angstom? |
| 20:28.48 | droebje | btw, you all have the Angstrom right? is A780 mainstone? |
| 20:29.26 | droebje | right=rom |
| 20:31.34 | tmzt | search for "qt extended" it was called qtopia |
| 20:37.53 | *** join/#openezx pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 22:06.37 | *** join/#openezx johanbr (n=j@blk-7-128-3.eastlink.ca) |
| 22:39.02 | *** join/#openezx WyrM (n=wyrm@189.13.119.74) |
| 23:21.05 | *** join/#openezx florian (n=fuchs@f054163127.adsl.alicedsl.de) |
| 23:38.42 | WyrM | damn, the new pxa-ssp.c asoc driver won't allow me to have 2 codec DAIs on the same SSP port :( |
| 23:39.33 | WyrM | I will need to implement full network mode to make it working again :( |
| 23:41.51 | WyrM | or join all pcm devices on one. |