| 02:15.20 | *** join/#openezx AlexZhang (n=alex@121.35.122.70) |
| 02:15.34 | *** part/#openezx Fry-kun (n=kostya@63.82.6.66) |
| 02:53.02 | *** join/#openezx Fry-kun (n=kostya@h-66-166-233-66.snvacaid.covad.net) |
| 02:54.03 | *** join/#openezx wt (n=wt@71.237.92.141) |
| 04:18.09 | *** join/#openezx LoneStar (n=xinzhen@211.144.200.92) |
| 04:24.14 | *** join/#openezx AlexZhan1 (n=alex@121.35.122.70) |
| 04:53.46 | *** join/#openezx AlexZhang (n=alex@121.35.122.70) |
| 05:02.48 | *** join/#openezx koen (n=koen@dominion.kabel.utwente.nl) |
| 05:05.59 | *** join/#openezx AlexZhan1 (n=alex@121.35.122.70) |
| 05:32.36 | AlexZhan1 | hi, All |
| 06:00.55 | *** join/#openezx pleemans (n=peter@leemanpe.ugent.be) |
| 06:06.28 | *** join/#openezx goxboxlive (n=goxboxli@141.80-202-161.nextgentel.com) |
| 06:10.01 | Fry-kun | hi alex |
| 06:12.49 | AlexZhan1 | hello, kun. are you busy? |
| 06:13.55 | Fry-kun | you mean me? |
| 06:14.15 | Fry-kun | i thought i saw someone with nickname "kun" though |
| 06:14.17 | AlexZhan1 | yep!!:-D |
| 06:14.18 | Fry-kun | so maybe not |
| 06:14.23 | Fry-kun | ah okay |
| 06:14.32 | Fry-kun | I'm Konstantin on the ML |
| 06:15.00 | AlexZhan1 | OK, I'll call you konstantin, but It's too long! LOL! |
| 06:15.13 | Fry-kun | hehe it's okay |
| 06:15.24 | Fry-kun | "Fry-kun" or "Fry" is good |
| 06:15.32 | Fry-kun | but "kun" is kind of weird |
| 06:15.34 | Fry-kun | :) |
| 06:15.51 | AlexZhan1 | have you already received my email? |
| 06:16.17 | AlexZhan1 | ok, call you Fry, it looks nice!:-[ |
| 06:16.47 | Fry-kun | last one I received was "any update?" about 3.5 hrs ago |
| 06:16.58 | Fry-kun | and i replied to that one |
| 06:17.39 | AlexZhan1 | ok, looks like it's been broken since pxa27x-udc-support.2.patch, why do you think so? |
| 06:18.12 | Fry-kun | oh, that was because I tried compiling it and running it on my a1200 |
| 06:18.26 | AlexZhan1 | but I cannot receive your email replied to that one. |
| 06:19.08 | Fry-kun | and when drWyrM heard I was getting stack trace, he asked me to check how far back into the patches it goes |
| 06:19.29 | Fry-kun | and one patch before pxa27x-udc-support.2.patch it was working fine |
| 06:19.45 | AlexZhan1 | oh, i see |
| 06:19.45 | Fry-kun | so looks like he reverted that patch |
| 06:20.58 | AlexZhan1 | ok, what can we do now? |
| 06:21.10 | AlexZhan1 | wait for his new patch? |
| 06:21.15 | Fry-kun | not sure |
| 06:21.25 | Fry-kun | as for me, he asked me to work on MMC/SD support |
| 06:21.37 | Fry-kun | so i'm banging my head against that :D |
| 06:21.50 | Fry-kun | kinda hard, since i've never done any kernel hacking |
| 06:21.51 | AlexZhan1 | ;-) |
| 06:22.01 | Fry-kun | what are you working on? |
| 06:22.08 | AlexZhan1 | me too, but I think we can try! |
| 06:22.22 | Fry-kun | yup, that's the spirit ^__^ |
| 06:22.51 | AlexZhan1 | ;) |
| 06:22.56 | Fry-kun | what phone do you have? |
| 06:23.10 | AlexZhan1 | A1200E |
| 06:23.17 | AlexZhan1 | and u? |
| 06:23.34 | Fry-kun | i think mine's original hk version |
| 06:23.37 | Fry-kun | not 100% sure |
| 06:23.45 | Fry-kun | it's running native 44P for now |
| 06:23.58 | Fry-kun | don't want to flash because there's no way to go back |
| 06:24.00 | AlexZhan1 | I tried to get a shell and telnet to the phone, but failed |
| 06:24.12 | Fry-kun | plus, having controllable linux on my phone would be awesome |
| 06:24.30 | Fry-kun | and having written part of it... supreme bragging rights ^_________^ |
| 06:24.49 | Fry-kun | ah.. i think i saw a few HOWTOs on getting shell |
| 06:24.53 | Fry-kun | and SSH |
| 06:24.58 | AlexZhan1 | :-Dso interesting! |
| 06:25.02 | Fry-kun | might be because of your model |
| 06:25.30 | AlexZhan1 | yes, I can ping the phone(192.168.1.2) now. |
| 06:25.43 | Fry-kun | ooh nice |
| 06:25.51 | Fry-kun | but no SSH? |
| 06:26.08 | AlexZhan1 | but telnet 192.168.1.2, got Error connecting to 192.168.1.2 (Connection refused) |
| 06:26.08 | AlexZhan1 | Connection to 192.168.1.2 failed |
| 06:26.19 | Fry-kun | by the way, did you hear that a1200e is essentially the same hardware as original a1200? |
| 06:26.31 | Fry-kun | everything to support EDGE is already there |
| 06:26.45 | Fry-kun | they just slapped on a new firmware and are selling it as a new phone |
| 06:26.51 | Fry-kun | kind of evil |
| 06:28.05 | Fry-kun | where do you live, by the way? |
| 06:28.36 | AlexZhan1 | China mainland |
| 06:28.40 | Fry-kun | i'm in california |
| 06:28.52 | Fry-kun | wow so you didn't have to "import" your phone :) |
| 06:29.18 | AlexZhan1 | LOL, right! |
| 06:29.28 | Fry-kun | i bought mine on ebay |
| 06:29.57 | Fry-kun | and when i called local Motorola they said they never heard of the phone model |
| 06:30.37 | AlexZhan1 | yes, these phones are only sell on China and HK |
| 06:30.40 | Fry-kun | but the funny part is, they could tell by IMEI # that it's supposed to be in warranty still :D |
| 06:31.07 | AlexZhan1 | =-Osurprise for you!!! |
| 06:31.25 | Fry-kun | but they're so cool! they'd sell really well if they just advertise them a little bit |
| 06:31.41 | Fry-kun | it's very stylish, and americans go crazy for style |
| 06:32.03 | Fry-kun | they only started selling it in US this year |
| 06:32.27 | AlexZhan1 | oh, but I think iphone is great |
| 06:32.36 | Fry-kun | saw it in CompUSA ($600USD!!!) and American Express website, once |
| 06:32.44 | Fry-kun | but nobody advertises it |
| 06:32.59 | Fry-kun | instead they advertise "razr" and "chocolate" |
| 06:33.10 | Fry-kun | both of which are horrible in comparison |
| 06:34.04 | AlexZhan1 | :-[ |
| 06:34.27 | Fry-kun | when i got A1200 a year ago, i went to a birthday party |
| 06:34.47 | Fry-kun | and my relative was there - he had just got rid of his razr |
| 06:34.56 | Fry-kun | and was showing off his "katana" |
| 06:35.22 | AlexZhan1 | when you got the A1200? |
| 06:35.23 | Fry-kun | i pulled out my a1200 and i watched his facial expression change - he was green with envy |
| 06:35.26 | AlexZhan1 | Katana?? |
| 06:35.52 | AlexZhan1 | :-D |
| 06:35.54 | Fry-kun | http://www.phonescoop.com/phones/phone.php?p=983 <- Sanyo SCP-6600 Katana |
| 06:36.51 | Fry-kun | VGA camera.. don't make me laugh |
| 06:36.57 | Fry-kun | heheh |
| 06:37.20 | AlexZhan1 | ;) |
| 06:37.22 | Fry-kun | but he signed up for a phone plan to get that phone for cheap, so he couldn't really buy an a1200 right then |
| 06:37.49 | slapin | gm, all! |
| 06:38.05 | Fry-kun | good evening |
| 06:38.16 | Fry-kun | it's 23:38 here :D |
| 06:38.23 | slapin | ~seen pH5 |
| 06:38.25 | purl | ph5 <n=ph5@p5485FFA4.dip.t-dialin.net> was last seen on IRC in channel #openezx, 10h 28m 55s ago, saying: 'Fry-kun: but in this case it doesn't actually matter because both ALT_1_OUT and ALT_1_IN are the same functionality (just look at the pxa developer's manual).'. |
| 06:38.28 | AlexZhan1 | it's 14:38 |
| 06:38.44 | slapin | 10:38 here |
| 06:39.07 | AlexZhan1 | BTW where are you from? |
| 06:39.52 | Fry-kun | guessing Russia |
| 06:40.50 | slapin | yup |
| 06:41.02 | Fry-kun | hehe |
| 06:41.10 | Fry-kun | too easy |
| 06:41.55 | Fry-kun | 1st clue: time zone |
| 06:41.55 | Fry-kun | 2nd clue: first name |
| 06:41.55 | Fry-kun | 3rd clue (noticed after I made the guess): TLD |
| 06:41.58 | AlexZhan1 | :-/ |
| 06:43.07 | Fry-kun | sergey: how is it going? |
| 06:44.25 | slapin | Fry-kun, excellent, except a bit sleepy |
| 06:44.56 | Fry-kun | lol, you're a night person like me :) |
| 06:45.04 | Fry-kun | i wake up around 9-10, too |
| 06:45.42 | slapin | Fry-kun, yeah, but I have to be at work early due to my boss' love to wake-up early |
| 06:46.01 | slapin | so, I have to compromise. |
| 06:46.07 | Fry-kun | hehe, i see |
| 06:46.21 | Fry-kun | well it's not too bad - because then you get the evening off |
| 06:46.43 | Fry-kun | i work late so i get home around 21:00 or so... |
| 06:46.51 | slapin | same here |
| 06:46.53 | Fry-kun | not much time for personal life :( |
| 06:47.28 | slapin | Fry-kun, no, I have all personal life I want no matter what. |
| 06:47.54 | Fry-kun | lucky :P |
| 06:48.12 | slapin | I just can't live w/o it. |
| 06:48.22 | Fry-kun | LOL |
| 06:48.31 | slapin | otherwise I turn crazy and unsocial |
| 06:48.46 | slapin | and agressive, to that matters. |
| 06:48.47 | Fry-kun | yeah that's me - crazy and unsocial |
| 06:48.56 | Fry-kun | ^__^ |
| 06:49.07 | slapin | Fry-kun, so, you know a solution |
| 06:49.28 | Fry-kun | yeah, but it's hard |
| 06:49.41 | slapin | Fry-kun, nobody promised easy life. |
| 06:50.09 | Fry-kun | haha, i'd demand a refund if it were so :D |
| 07:03.59 | Fry-kun | so, slapin, what piece are you working on? |
| 07:04.13 | Fry-kun | do you also have an a1200? or some other phone? |
| 07:05.40 | slapin | Fry-kun, I work on ov9640 (cam sensor), so not much related with ezx phones, just a little bit. |
| 07:06.53 | Fry-kun | ah okay |
| 07:26.56 | *** join/#openezx z72ka (n=hermanj@r5af183.net.upc.cz) |
| 07:33.15 | Hopscotch | good morning |
| 07:33.27 | Fry-kun | good night |
| 07:33.56 | Fry-kun | cool, people all over europe are waking up :) |
| 07:36.38 | Fry-kun | Hopscotch: which part of OpenEZX are you working on? |
| 08:18.32 | *** join/#openezx ade|desk (n=adavey@194.200.143.249) |
| 08:30.36 | *** join/#openezx flo_lap (n=fuchs@f049171165.adsl.alicedsl.de) |
| 08:40.39 | *** join/#openezx |dion| (n=dion@inhex.net) |
| 08:43.23 | *** join/#openezx AlexZhang (n=alex@121.35.128.118) |
| 09:17.20 | *** join/#openezx florian (n=fuchs@217.146.132.69) |
| 09:17.50 | *** join/#openezx AlexZhan1 (n=alex@58.61.45.63) |
| 09:17.56 | florian | good morning |
| 09:25.19 | *** join/#openezx slapin_nb (n=slapin@143.166.249.ozerki.net) |
| 09:26.58 | LoneStar | good morning florian |
| 10:07.41 | *** join/#openezx flo_lap (n=fuchs@217.146.132.69) |
| 10:40.46 | *** join/#openezx pH5 (n=ph5@p5485C0D7.dip.t-dialin.net) |
| 10:45.47 | *** part/#openezx AlexZhan1 (n=alex@58.61.45.63) |
| 11:12.53 | *** join/#openezx ao2 (n=u@2001:1418:117:0:0:0:0:1) |
| 11:47.18 | *** join/#openezx drWyrM (i=c88e3027@gateway/web/cgi-irc/ircatwork.com/x-60a0ddcb866b3230) |
| 11:50.05 | drWyrM | good morning. |
| 11:53.51 | pH5 | hi drWyrM |
| 12:03.54 | slapin | drWyrM, hi! |
| 12:03.59 | *** join/#openezx AlexZhang (n=alex@218.17.82.125) |
| 12:04.00 | slapin | pH5, hi! |
| 12:04.57 | pH5 | hi slapin |
| 12:05.51 | pH5 | slapin: does the ov9640 need the CIF clock enabled before it shows up on the i2c bus? |
| 12:08.42 | pH5 | ah, nm. it seems it does. |
| 12:10.15 | slapin | pH5, according to driver, it is not, only to power-up. |
| 12:10.28 | slapin | pH5, I mean it needs to be powered up. |
| 12:10.46 | slapin | pH5, btw,in your case, what you need to do to power this thing up? |
| 12:11.36 | pH5 | I have one active-low gpio (116 here) to power it. gpio 57 is cam_reset. |
| 12:12.13 | pH5 | It didn't show up in i2cdetect after that, so I enabled CKEN24 and the CIF clocks in the CICRx registers |
| 12:12.40 | pH5 | now i2cdetect detects the chip at 0x30 |
| 12:14.28 | slapin | pH5, cool |
| 12:35.38 | pH5 | hm.. but I don't seem to be able to communicate with it. aiui to read the PID register I have to write the register address to i2c address 0x00 and read back the register value from the same position. but it just times out. |
| 12:35.46 | pH5 | maybe the clock settings are wrong.. |
| 12:46.41 | AlexZhang | hi, drWyrM. Are you here? |
| 12:46.59 | drWyrM | Hi Alex. |
| 12:49.00 | AlexZhang | I see the ezx.h in A1200 source code from openmotorola.org, found the detect GPIO is 111. |
| 12:49.48 | drWyrM | Fry-Kun was working on this yesterday. |
| 12:50.10 | AlexZhang | but I try to modify ezx.h on linux-2.6.21/include/asm/arch-pxa/ezx.h, but nothing work. |
| 12:50.48 | AlexZhang | oh! what's his workaround? |
| 12:51.06 | AlexZhang | hi Fry, can we discuss about this question? |
| 12:52.00 | AlexZhang | #define GPIO_MMC_DETECT 111 |
| 12:52.08 | drWyrM | AlexZhang: please identify to nickserv so i can send you private messages :) |
| 13:20.43 | *** join/#openezx mickeyl (n=mickeyl@linuxtogo.org) |
| 13:20.49 | mickeyl | hi |
| 13:21.25 | mickeyl | anyone w/ an a1200 around? i can't seem to get it to stay in mbm mode. whenever i release one of the three keys, it goes to poweroff. is that a known problem? |
| 13:22.11 | mickeyl | (yes, the battery should be fairly full) |
| 13:26.23 | drWyrM | mickeyl: AlexZhang has an a1200. I dont think that this is the normal behaviour. |
| 13:29.35 | mickeyl | :) |
| 13:31.25 | mickeyl | got myself an a1200 while i was in .tw |
| 13:31.48 | mickeyl | tried to flash something more european and boom... bricked it the first time :D |
| 13:40.56 | slapin | pH5, it has startup sequence, have you seen it? |
| 13:47.05 | *** join/#openezx drath_ (i=vmaster@p5B07CCBB.dip.t-dialin.net) |
| 13:50.59 | slapin | pH5, http://ossfans.org/paste?id=7120be |
| 13:51.23 | slapin | pH5, try my driver |
| 13:51.56 | pH5 | slapin: ah right, thanks. it wasn't in the original i2c code though. ugly motorola drivers. |
| 13:52.00 | pH5 | I'll try yours. |
| 13:54.21 | slapin | pH5, svn.sf.net/svnroot/hackndev/linux4palm/linux/trunk/drivers/i2c/chips/i2c-ov9640.c, IIRC |
| 13:55.12 | slapin | pH5, could you please share what you found? |
| 13:57.41 | pH5 | until now I only found out the CAM_RESET / nCAM_EN pins on my device (HTC Magician) and noticed that the OV chip only seems to appear on the I2C bus when the CIF_MCLK is enabled (and the divider isn't too high). |
| 13:57.54 | pH5 | Let's see if the init sequence will do the trick... |
| 13:59.53 | *** part/#openezx AlexZhang (n=alex@218.17.82.125) |
| 14:00.53 | slapin | pH5, could you please provide full init sequence then, so it could be put in ov9640_hw.c? |
| 14:01.12 | slapin | pH5, so to init it alongside with i2c? |
| 14:02.00 | slapin | pH5, and could you provide GPIO configuration of yours (ov96xx pins) |
| 14:03.50 | pH5 | slapin: my gpio configuration is already described in the hh.org kernel tree (include/asm-arm/arch-pxa/magician.h). |
| 14:04.09 | pH5 | slapin: I'll start making patches as soon as I get at least something back from the OV96xx. |
| 14:08.07 | pH5 | slapin: why does i2c-ov9640.c include ov9640_hw.h? |
| 14:08.24 | Fry-kun | good morning, all |
| 14:08.30 | pH5 | hi Fry-kun |
| 14:08.34 | drWyrM | Hi Konstantin. |
| 14:09.07 | slapin | pH5, I have ad-hoc init code built in. |
| 14:09.34 | slapin | pH5, I'll put that into newly created ov9640_hw.c |
| 14:10.32 | pH5 | hm.. ok. I'm still a bit confused about which parts should go where. |
| 14:11.01 | pH5 | so we will have one ov9640 platform device driver that depends on the i2c part and gets configured with gpios and interface method in its platform_data? |
| 14:11.12 | slapin | pH5, yes |
| 14:11.57 | slapin | pH5, and one separate device-independant CI driver |
| 14:12.23 | slapin | pH5, which controls both others via callbacks. |
| 14:12.32 | pH5 | great, I might be beginning to understand :) |
| 14:13.17 | slapin | pH5, we'd better set up git somewhere, if you like... |
| 14:14.00 | slapin | pH5, I can set up vanilla git somewhere |
| 14:15.26 | pH5 | slapin: yes, that would be good. |
| 14:21.31 | slapin | pH5, empty git is ssh://ph5@ossfans.org/git/kernel-ov94xx.git |
| 14:23.38 | pH5 | slapin: shouldn't that be ov96xx.git? :) |
| 14:23.43 | *** join/#openezx goxboxlive (n=goxboxli@141.80-202-161.nextgentel.com) |
| 14:24.04 | slapin | pH5, I'll rename, ok |
| 14:27.31 | slapin | pH5, renamed |
| 14:27.36 | slapin | pH5, please check |
| 14:29.56 | *** join/#openezx TimRiker (i=timr@205.233.55.201) |
| 14:33.09 | *** part/#openezx Fry-kun (n=kostya@h-66-166-233-66.snvacaid.covad.net) |
| 14:44.16 | slapin | pH5, ping |
| 14:46.48 | *** join/#openezx |dion| (n=dion@inhex.net) |
| 14:48.06 | pH5 | slapin: http://en.pastebin.ca/591974 |
| 14:50.19 | slapin | pH5, device seems to exist, but doesn't replies with anything to init. |
| 14:50.34 | slapin | pH5, while attempt to get REV returns something |
| 14:50.45 | slapin | pH5, but dunno if it's right. |
| 14:54.07 | slapin | pH5, as I noticed, if device exists, driver is always initialized. |
| 14:54.33 | slapin | pH5, so that's quite probably probe routine is wrong in motorola driver |
| 14:54.46 | slapin | pH5, so I'd move forward for now. |
| 14:54.58 | pH5 | Ah, I had REV=0x0a definition in i2c-ov9640.h, which should be 0x0b (PID is 0x0a) |
| 14:55.13 | pH5 | it returns the correct PID (0x96), and now that I fixed REV, I see it's 0x52 |
| 14:55.18 | pH5 | --> 9650 |
| 14:55.26 | slapin | pH5, commit that please |
| 14:55.55 | slapin | pH5, do you have sensor spec? |
| 14:56.03 | pH5 | slapin: what is in the repository, currently? |
| 14:56.15 | pH5 | I try to clone with "git-clone --reference linux-2.6 ssh://ph5@ossfans.org/git/kernel-ov96xx.git" |
| 14:56.22 | pH5 | but it hangs after giving the pwd. |
| 14:56.35 | pH5 | no, I don't have the sensor spec. |
| 14:56.47 | slapin | pH5, should work |
| 14:56.59 | slapin | pH5, try just get it |
| 14:57.11 | slapin | (clone) |
| 14:57.19 | slapin | it is small |
| 14:57.54 | pH5 | ah ok, that --reference was stupid. |
| 15:10.06 | pH5 | slapin: do you have ov9640 specs, and if yes - where did you get them? |
| 15:10.47 | pH5 | I wonder how similar those chips really are. |
| 15:10.52 | slapin | pH5, no, I don't |
| 15:11.07 | slapin | pH5, as for drivers - lots of similarities |
| 15:13.02 | pH5 | there is also drivers/media/video/ovcamchip - are those (6xxx, 7xxx) different? |
| 15:15.16 | slapin | pH5, they are a lot simpler and different. |
| 15:17.44 | slapin | pH5, I added some of my changes for video driver, you can take it as template for v4l2 driver |
| 15:19.03 | slapin | pH5, you just need to remove repeated includes from there. |
| 15:29.07 | *** join/#openezx TimRiker (i=timr@205.233.55.201) |
| 15:32.43 | *** join/#openezx LoneStar (n=xinzhen@218.81.28.68) |
| 15:46.41 | slapin | pH5, ping |
| 15:47.34 | pH5 | pong. I'm looking for ov9650 data sheets, but can't find any. |
| 15:48.05 | slapin | pH5, there is one but it is useless |
| 15:48.32 | slapin | pH5, also they have description for their 'bus' |
| 15:49.12 | slapin | btw, sensor is old, why won't they give out spec? |
| 15:51.04 | pH5 | there is a spec for 9630 on the ovt page, but the register layout is slightly different. |
| 15:59.02 | slapin | pH5, http://www.ovt.com/support/datasheet.asp :) |
| 16:07.50 | slapin | pH5, http://www.wifi.com.ar/english/doc/webcam/ov511cameras.html |
| 16:09.17 | *** join/#openezx goxboxlive (n=goxboxli@141.80-202-161.nextgentel.com) |
| 16:49.56 | *** join/#openezx z72ka (n=hermanj@r5af183.net.upc.cz) |
| 17:07.16 | *** join/#openezx ao2 (n=u@2001:1418:117:0:0:0:0:1) |
| 17:07.23 | *** join/#openezx Fry-kun (n=kostya@h-66-166-233-66.snvacaid.covad.net) |
| 17:08.11 | *** part/#openezx Fry-kun (n=kostya@h-66-166-233-66.snvacaid.covad.net) |
| 17:40.42 | *** join/#openezx LuitvD (n=luitvd@beigetower/luitvd) |
| 17:48.00 | *** join/#openezx Fry-kun (n=kostya@h-66-166-233-66.snvacaid.covad.net) |
| 17:48.12 | Fry-kun | hello |
| 17:50.27 | *** join/#openezx pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 17:55.33 | *** join/#openezx jamesmck (n=james@gimel.esc.cam.ac.uk) |
| 18:13.18 | *** join/#openezx TimRikerOLS (i=timr@pdpc/supporter/bronze/TimRiker) |
| 18:23.37 | Fry-kun | ~logs |
| 18:23.38 | purl | i guess logs is apt/ibot/infobot/jbot/purl all log daily to http://ibot.rikers.org/<channelname>/ where channelname is html encoded ie: %23debian | lines that start with a space are not shown | some channels have stats at http://ibot.rikers.org/stats/<channelname>.html.gz |
| 18:36.27 | *** join/#openezx |dion| (n=dion@inhex.net) |
| 19:16.03 | *** join/#openezx LuitvD (n=luitvd@beigetower/luitvd) |
| 19:25.39 | ao2 | z72ka, are you using latest bluez-utils with bcm2035 on your devices? I have a question: running 'hciconfig hci0 down && hciconfig hci0 up' the device lose the bdaddr (I set it via hciattach)... |
| 19:27.07 | ao2 | well, the question is: does that happen to you too? |
| 19:34.37 | *** part/#openezx Fry-kun (n=kostya@h-66-166-233-66.snvacaid.covad.net) |
| 19:40.16 | z72ka | ao2: Take a while.. I try it now |
| 19:41.41 | z72ka | ao2: Right.. lose bdaddr |
| 19:41.54 | z72ka | ao2: but this isn't problem |
| 19:42.09 | z72ka | ao2: sorry.. se U later, I must go |
| 20:29.40 | *** join/#openezx Fry-kun (n=kostya@h-67-100-89-239.snfccasy.covad.net) |
| 20:54.04 | *** join/#openezx Fry-ku1 (n=kostya@63.82.6.66) |
| 21:04.58 | *** join/#openezx drWyrM (n=wyrm@201.2.68.83) |
| 21:28.35 | Fry-ku1 | hi drWyrM |
| 21:28.45 | Fry-ku1 | oops, brb |
| 21:28.46 | drWyrM | hi Konstantin. |
| 21:30.20 | *** join/#openezx Fry-kun (n=kostya@63.82.6.66) |
| 21:30.27 | Fry-kun | k, back |
| 21:31.23 | Fry-kun | so.. just found this: placed a printk in drivers/base/bus.c (line 536) - and it says add driver mmcblk |
| 21:48.11 | *** join/#openezx Fry-kun (n=kostya@63.82.6.66) |
| 22:20.06 | *** part/#openezx Fry-kun (n=kostya@63.82.6.66) |