| 00:00.28 | ant__ | Jay7: kexec/kexecboot still working compiled against klibc_1.5.18 :D |
| 00:00.34 | ant__ | good night |
| 00:01.57 | *** join/#oe BenLauDC (~benlau@221.125.8.44) |
| 00:14.38 | *** join/#oe dth (~dieter@p4FDEA85B.dip.t-dialin.net) |
| 00:26.44 | *** join/#oe aloisiojr (~aloisio@187.113.123.147) |
| 00:53.38 | *** join/#oe rsalveti_ (~rsalveti@187.113.97.121) |
| 01:02.22 | *** join/#oe uchobby (~uchobby01@adsl-99-162-113-176.dsl.austtx.sbcglobal.net) |
| 01:12.24 | *** join/#oe aloisiojr (~aloisio@187.113.123.147) |
| 01:20.51 | *** join/#oe raster (~raster@enlightenment/developer/raster) |
| 01:27.43 | *** join/#oe mithro (~tim@unaffiliated/mithro) |
| 01:55.05 | *** join/#oe rsalveti__ (~rsalveti@187.59.124.142) |
| 02:02.39 | *** join/#oe william_zhang (~william@58.247.126.174) |
| 02:05.49 | *** join/#oe vivijim (~rvivi@pasanda.collabora.co.uk) |
| 02:18.44 | *** join/#oe quitte_ (~quitte@g228007237.adsl.alicedsl.de) |
| 02:29.06 | *** join/#oe waite (~quassel@c-24-91-81-44.hsd1.ma.comcast.net) |
| 02:34.45 | *** join/#oe MWelchUK_work_ (~welchma@65.91.2.71) |
| 02:35.28 | *** join/#oe aliosa27 (~aliosa27@2002:ce7e:d252:0:226:bbff:fe17:44cb) |
| 02:46.09 | uchobby | I'm just getting started with Embedded Linux. I have a rugged PC device, 1GHz fanless brick, boots from Compact Flash. Have a 512MB CF card booting DSL Linux. What Linux should I put on this? I want a good terminal, VT100, and ability to run Java would be nice. Any sugestions? |
| 02:49.17 | *** join/#oe jmpdelos (~polk@outgoing.delos.com) |
| 02:53.11 | grg | uchobby, sounds like you want to play. Try everything you can get your hands on. |
| 02:53.28 | uchobby | I do want to play grg |
| 02:54.25 | uchobby | I could use DSL (dam small linux) but I want to install a terminal app and apt-get does not seem to be there. |
| 02:55.46 | grg | i suggest you look at the docs for DSL. I would be surprised if it didn't have some kind of package management |
| 02:56.28 | grg | btw, this channel is not really for embedded linux in general. It is for OpenEmbedded, a framework for building embedded linux distributions. |
| 02:57.19 | grg | There are several OE based distros you could try on your system. Check the OE site. |
| 03:04.25 | *** join/#oe borg__ (~olaf@p54869827.dip0.t-ipconnect.de) |
| 03:04.59 | uchobby | I did look around, did not find a collection of ISOs to try. Will look again. |
| 03:05.22 | uchobby | http://bengross.com/resources/smallunix/ |
| 03:05.34 | uchobby | I found that, seems like a posible list, but yes not OE I assume |
| 03:06.55 | uchobby | Ultimatly I would like to do some development for embedded Linux. Write software to run on that platform. I have done a great deal of work on Window and CE. Some on Andriod in Java, want to learn about Linux. Much of what I do is embedded C on AVR microcontrollers |
| 03:07.51 | *** join/#oe raster (~raster@enlightenment/developer/raster) |
| 03:08.07 | uchobby | I want direct access to the serial and parallel ports, things like that from C/C++/Java etc... I figure Linux would be better for that. |
| 03:14.48 | grg | uchobby, you are unlikely to find iso images for OE based distros |
| 03:15.34 | uchobby | nods |
| 03:18.12 | grg | uchobby, are you familiar with the bootloader on your device? |
| 03:18.20 | grg | probably lilo, or grub? |
| 03:18.49 | grg | you'll probably want to read the docs for your bootloader. |
| 03:18.51 | uchobby | Not really, grg. I just made a bootable CF card with the DSL ISO |
| 03:19.23 | *** join/#oe aloril (~aloril@dsl-tkubrasgw3-fe7ef900-153.dhcp.inet.fi) |
| 03:20.06 | grg | well to use OE, you'll need to do a manual installation. E.g. grab a bootable cd (DSL maybe) and format the cf card. Extract the OE rootfs tarball, then tell your bootloader where the kernel and the filesystem are. |
| 03:21.08 | grg | the reason there is no iso/installer, is that OE distros often (mostly?) run on systems that typically don't have keyboard/mouse as standard |
| 03:21.31 | grg | and most probably wont have cd/dvd drive either. |
| 03:21.57 | grg | so manual installation is assumed. e.g. for a phone, or the beagleboard |
| 03:22.57 | uchobby | nods |
| 03:23.13 | grg | uchobby, since you are just learning, it may be worthwhile for you to look at linuxfromscratch. This should help give you an overview of an entire linux system as you put it together. |
| 03:23.22 | uchobby | The device I'm using does have VGA, Keyboard and Mouse, I just hook up standard devices |
| 03:23.39 | uchobby | thank you grg, that sounds like what I should study |
| 03:23.48 | uchobby | I dont know much, am on a path to learn |
| 03:24.04 | grg | yes. you can just install standard (heavyweight) distributions on those mini PC type boxes |
| 03:24.16 | grg | like ubuntu/fedora |
| 03:27.17 | uchobby | Yes, I tried ubuntu but had some trouble with it booting from USB. Seems the BIOS on this thing does not work properly |
| 03:27.34 | uchobby | http://www.aaeon.com/PD_Products_Detail_ACFF26D83219484A97_3167BD01B5D6430983_E8C9CBF82A9C40349B_DE_UTF-8.html |
| 03:27.41 | uchobby | that's the box I'm playing with |
| 03:32.21 | uchobby | grg, thanks for the http://www.linuxfromscratch.org/ mention. I am reading |
| 03:32.50 | grg | uchobby, i think those guys have an irc channel on freenode too... |
| 03:34.38 | grg | uchobby, for your programming, i highly recommend a copy of Stevens' Advanced Programming in the Unix Environment |
| 03:35.11 | uchobby | thanks |
| 03:36.57 | uchobby | do you know what their channel would be? I did a search and got nothing |
| 03:37.42 | grg | i thought it was #lfs - looks like a place holder now. points at #lfs-support on irc.linuxfromscratch.org |
| 03:48.18 | *** join/#oe xwl (~henin@2001:e10:6840:21:21a:4dff:fe8d:4222) |
| 04:11.28 | *** join/#oe Lint (~Linp@201-92-181-161.dsl.telesp.net.br) |
| 04:15.21 | *** join/#oe methril (~methril@189.27.128.78.dynamic.adsl.gvt.net.br) |
| 04:28.43 | *** join/#oe mrc3 (~ddiaz@189.157.114.13) |
| 04:53.49 | *** join/#oe jmpdelos_ (~polk@outgoing.delos.com) |
| 04:58.47 | *** join/#oe jmpdelos (~polk@outgoing.delos.com) |
| 05:10.52 | *** join/#oe soltys (soltys@soltys.soad.pl) |
| 05:19.40 | *** join/#oe rsalveti (~rsalveti@189.115.173.203) |
| 05:29.13 | *** join/#oe tasslehoff (~tasslehof@147.84-49-231.nextgentel.com) |
| 05:59.38 | *** join/#oe rob_w (~bob@pD95EBE09.dip.t-dialin.net) |
| 06:13.32 | CIA-1 | 03Jussi Timperi <jussi.timperi@gmail.com> 07org.openembedded.dev * r9e1bfaca7c 10openembedded.git/recipes/tasks/task-shr-feed.bb: |
| 06:13.32 | CIA-1 | task-shr-feed: add omhacks |
| 06:13.32 | CIA-1 | Signed-off-by: Jussi Timperi <jussi.timperi@gmail.com> |
| 06:13.32 | CIA-1 | Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> |
| 06:13.42 | CIA-1 | 03Jussi Timperi <jussi.timperi@gmail.com> 07org.openembedded.dev * rbc330329c6 10openembedded.git/recipes/openmoko-3rdparty/omhacks_git.bb: |
| 06:13.42 | CIA-1 | omhacks: new recipe |
| 06:13.42 | CIA-1 | C library of useful functions to control OpenMoko hardware. |
| 06:13.42 | CIA-1 | Signed-off-by: Jussi Timperi <jussi.timperi@gmail.com> |
| 06:13.43 | CIA-1 | Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> |
| 06:13.58 | *** join/#oe rsalveti (~rsalveti@189.115.175.232) |
| 06:29.30 | *** join/#oe eFfeM_work (~frans@atwork-193.r-212.178.107.atwork.nl) |
| 06:31.18 | *** join/#oe ZeeD (~ZeeD@62.119.72.59) |
| 06:37.12 | *** join/#oe kristoffer (~kristoffe@79.138.180.119.bredband.tre.se) |
| 06:38.23 | *** join/#oe Gaston|Home (~Miranda@c-012fe353.155-1-64736c11.cust.bredbandsbolaget.se) |
| 06:39.36 | CIA-1 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * rbfd1c1768a 10openembedded.git/recipes/busybox/ (12 files in 3 dirs): busybox 1.16.1: add recipe |
| 06:39.37 | CIA-1 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * r9545699b44 10openembedded.git/recipes/gtk-webcore/midori_0.2.4.bb: midori 0.2.4: bump PR |
| 06:39.40 | CIA-1 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * r4d7c748614 10openembedded.git/recipes/gnome/epiphany_2.30.2.bb: epiphany: add 2.30.2 |
| 06:39.42 | CIA-1 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * r91eefa1e3f 10openembedded.git/recipes/webkit/ (4 files in 2 dirs): webkit-gtk: bump SRCREV |
| 06:39.43 | CIA-1 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * r0de4993ae3 10openembedded.git/recipes/webm/libvpx_0.9.0.bb: libvpx: add 0.9.0 |
| 06:42.10 | *** join/#oe ao2 (~ao2@cl-35.trn-01.it.sixxs.net) |
| 06:44.17 | *** join/#oe shashi (~a0876501@nat/ti/x-etgulgkcpfmjridg) |
| 06:45.06 | *** join/#oe sgh (~quassel@cpe.ge-0-2-0-950.faaqnqu1.customer.tele.dk) |
| 06:45.52 | *** join/#oe Proxyles (~henrik@nl118-171-71.student.uu.se) |
| 06:46.24 | *** join/#oe vps (~vitus@212.144.247.210) |
| 06:51.56 | *** join/#oe Heinervdm (~thomas@pD9E15982.dip.t-dialin.net) |
| 07:05.05 | hrw | morning |
| 07:23.45 | *** join/#oe tsjsieb (~tsjsieb@194.109.164.83) |
| 07:28.00 | *** join/#oe rsalveti_ (~rsalveti@187.59.116.140) |
| 07:40.29 | *** join/#oe dth (~dieter@p4FDEA85B.dip.t-dialin.net) |
| 07:58.28 | mckoan | good morning |
| 08:09.33 | janp | Hi, I have had some problems with wpa_supplicant. It seems that when wpa_supplicant is compiled with gnutls and certificates for eap-tls are generated with openssl, that wpa_supplicant doesn't understand them. Compiling wpa_supplicant with openssl solves the problem. Should I submit a patch for wpa_supplicant or perhaps create a dedicated recipe? |
| 08:11.51 | dm8tbr | my guess is you should discuss this with the wpa_supplicant people |
| 08:17.56 | janp | Well, wpa_supplicant can be compiled in different ways using a config file. With openembedded it's compiled with gnutls, openembedded could compile it with openssl |
| 08:25.57 | hrw | make a wpa-supplicant-openssl recipe I think |
| 08:26.15 | *** join/#oe ant_work (~andrea@host214-85-static.34-85-b.business.telecomitalia.it) |
| 08:26.23 | *** join/#oe lrg (~lrg@slimlogic.co.uk) |
| 08:29.07 | *** join/#oe woglinde (~henning@p5DDC3DF9.dip.t-dialin.net) |
| 08:30.23 | *** join/#oe likewise (~likewise@188.201.28.66) |
| 08:33.21 | woglinde | hi likewise |
| 08:33.57 | likewise | gm woglinde, all |
| 08:34.39 | woglinde | is now playing with a BUG |
| 08:34.41 | woglinde | *g* |
| 08:37.53 | woglinde | hm but now I am little bit puzzled how the parts fits together |
| 08:39.49 | hrw | woglinde: 1.3 or 2.0proto? |
| 08:40.04 | woglinde | 2.0 |
| 08:40.08 | woglinde | proto |
| 08:40.11 | woglinde | hi hrw |
| 08:40.13 | woglinde | btw. |
| 08:43.45 | hrw | woglinde: good device |
| 08:44.48 | ao2 | hi, I get a CROSS COMPILE Badness building gpsd: http://bugs.openembedded.org/show_bug.cgi?id=5441 |
| 08:45.36 | woglinde | ao2 check the config.log |
| 08:45.49 | woglinde | why configure dont uses oe libusb |
| 08:47.47 | ao2 | woglinde, I guess this is why: configure.ac: INCUSB=-I/usr/include/lib${usb} |
| 08:49.31 | ao2 | shouldn't this be using some generic prefix? |
| 08:50.50 | woglinde | wuahahahahahaa |
| 08:51.54 | woglinde | ~lart gpsd devs |
| 08:51.54 | ibot | whips gpsd devs with a wet and grimy noodle just because |
| 08:51.58 | *** join/#oe raster (~raster@enlightenment/developer/raster) |
| 08:52.02 | woglinde | jo raster |
| 08:52.04 | *** join/#oe vonami|work (~vonami@79.143.67.122) |
| 08:52.35 | raster | mrmlrmlrmlr |
| 08:57.27 | ant_work | morning |
| 08:57.45 | woglinde | hi ant |
| 08:57.45 | *** join/#oe mouss (~mouss@cqf44-2-88-164-112-80.fbx.proxad.net) |
| 08:58.08 | ant_work | ericben: ping |
| 08:58.46 | *** join/#oe mickey|office (~Mickey@business-092-079-168-007.static.arcor-ip.net) |
| 08:59.26 | ericben | ant_work: hi |
| 08:59.44 | ant_work | hi, would you mind to test klibc building for x86? |
| 08:59.46 | mouss | hello |
| 09:00.08 | mouss | Could someone give me a hint to solve that issue : http://www.mail-archive.com/openembedded-devel@lists.openembedded.org/msg06096.html |
| 09:00.14 | mouss | please |
| 09:00.28 | ericben | ant_work: I can launch the build, but I won't be able to test as I don't have the target actually |
| 09:00.43 | ant_work | I see, thx |
| 09:01.01 | ant_work | you're using 2.6.3x kernel, isn't? |
| 09:01.11 | ericben | 2.6.33 |
| 09:01.16 | ant_work | perfect |
| 09:01.26 | woglinde | hi ericben |
| 09:01.40 | woglinde | ao2 I think libusb has a .pc file |
| 09:01.48 | ericben | hi woglinde |
| 09:01.52 | woglinde | so the pkgconfig m4-macro could be used |
| 09:02.09 | woglinde | but I wonder why jama didnt stumble over it |
| 09:02.12 | likewise | woglinde: what is bug 2.0 about? new processor? |
| 09:02.23 | woglinde | likewise nope new hw from buglabs |
| 09:02.39 | woglinde | sucessor of bug 1 |
| 09:02.41 | likewise | woglinde: yes I know, but what is new in 2? |
| 09:02.47 | ao2 | woglinde, so pkg-config should do, and I can strip that libusb altogether? |
| 09:02.59 | woglinde | ao2 strip? |
| 09:03.01 | ao2 | s/libusb/INCUSB/ |
| 09:03.10 | woglinde | ao2 there are pgkconfig m4 macros |
| 09:03.16 | ao2 | remove the hardcoded include I mean |
| 09:03.34 | ericben | likewise: OMAP3 CPU instead of iMX : http://bugblogger.com/welcome-to-barcelona-bug-2-0-522/ |
| 09:03.36 | woglinde | which should be used in configure.ac and the Makefile.am which needs it |
| 09:04.08 | ant_work | ericben: lot of hacks to build with kernels <2.6.31 and new ones for <2.6.33 |
| 09:04.14 | JaMa|Wrk | woglinde: minimalistic chroot without libusb probably... |
| 09:04.29 | woglinde | he jama, okay |
| 09:04.48 | ant_work | hi JaMa|Wrk |
| 09:05.09 | JaMa|Wrk | woglinde: hi |
| 09:05.13 | JaMa|Wrk | ant_work: hi |
| 09:05.14 | woglinde | jama hm I see freerunner gps isnt connected via usb-dev |
| 09:05.37 | woglinde | ao2 you could also send the patch upstream |
| 09:06.01 | ericben | ant_work: that will take ~ one hour as I must rebuild from scratch as my x86 workdir was not synced for a while |
| 09:06.08 | woglinde | ao2 ask me again if you have trouble to figure ut out |
| 09:06.15 | ant_work | ericben: take your time |
| 09:06.19 | ao2 | woglinde, thanks |
| 09:06.45 | JaMa|Wrk | woglinde: and I meant, that my "host" doesn't have libusb, so if this INCUSB is added conditionaly when found, then it's not found here |
| 09:09.34 | woglinde | jama yes I understood, but I meant if the freerunners gps-dev would be usb you would have stumble over it |
| 09:17.17 | *** join/#oe CMoH-notebook (~cipi@95.76.71.81) |
| 09:21.38 | woglinde | hi xora |
| 09:21.46 | XorA | hi woglinde |
| 09:25.48 | *** join/#oe B_Lizzard (~havoc@athedsl-420188.home.otenet.gr) |
| 09:34.29 | *** join/#oe cbrake (~cbrake@oh-69-34-21-229.sta.embarqhsd.net) |
| 09:37.22 | *** join/#oe florian_kc (~fuchs@Maemo/community/contributor/florian) |
| 09:41.26 | woglinde | hi florian |
| 09:57.16 | *** join/#oe rwhitby (~rwhitby@nslu2-linux/rwhitby) |
| 10:07.39 | ant_work | I knew someone out there hates broken bootloaders... http://elinux.org/images/7/7b/LinuxWithoutABootLoader.pdf |
| 10:08.35 | ant_work | will be presented on ELC_2010 |
| 10:08.43 | *** join/#oe rob_w (~bob@217.237.177.190) |
| 10:08.55 | woglinde | ant_work coreboot? |
| 10:09.21 | ant_work | no, kernel patches it seems |
| 10:09.50 | ericben | ant_work: klibc seems to build fine but v86d is broken |
| 10:10.11 | ericben | ant_work: I don't know (yet) if that's linked |
| 10:10.49 | *** join/#oe ZeeD (~ZeeD@62.119.72.59) |
| 10:10.58 | woglinde | ant hm checked the slides |
| 10:10.58 | ant_work | test would be to build kexec-tools-klibc-static |
| 10:11.08 | woglinde | he added asm code to enable all hw |
| 10:11.10 | woglinde | thatsit |
| 10:11.22 | ant_work | only 30 lines for a board |
| 10:11.56 | ant_work | well, 50-90 ;) |
| 10:12.14 | ericben | ant_work: not having a bootloader can be cool when the product is ready for production but for dev that's not so cool ;-) |
| 10:12.37 | woglinde | ericben if you only have small mem |
| 10:12.40 | ant_work | sure ! |
| 10:12.43 | woglinde | its good to |
| 10:12.49 | woglinde | instead of 3 mb kernel |
| 10:13.05 | florian | good morning |
| 10:13.13 | woglinde | jo florian |
| 10:13.15 | woglinde | lunch now |
| 10:13.25 | woglinde | till later |
| 10:14.11 | *** join/#oe Nordh (~henrik@nl118-171-71.student.uu.se) |
| 10:15.42 | *** join/#oe Sleep_Walker (~Sleep@nat/novell/x-nqphbiqjfrxlsjql) |
| 10:19.49 | ericben | ant_work: here is the log http://pastebin.org/295580 |
| 10:26.14 | *** join/#oe pix_ (~pix@2001:6f8:3b5:0:219:dbff:fec7:9c83) |
| 10:26.57 | *** join/#oe pirho (debian-tor@gateway/tor-sasl/pirho) |
| 10:28.55 | *** join/#oe morphis (~morphis@p5489E4AA.dip.t-dialin.net) |
| 10:30.39 | *** join/#oe mario-go` (~user@67.205.85.241) |
| 10:30.51 | *** join/#oe _freddy (~freddy@kenny.kriewitz.eu) |
| 10:31.37 | *** join/#oe Proxyles (~henrik@nl118-171-71.student.uu.se) |
| 10:36.05 | woglinde | re |
| 10:41.18 | *** join/#oe waite (~quassel@c-24-91-81-44.hsd1.ma.comcast.net) |
| 10:46.45 | *** join/#oe CMoH (~cipi@95.76.71.81) |
| 10:47.47 | *** join/#oe siji (~siji@122.169.0.78) |
| 10:48.43 | *** join/#oe mindThomas (~mind@exchangea1.holstebrots.dk) |
| 10:48.46 | mindThomas | Hi |
| 10:48.47 | mindThomas | Any UK guys in here who would call their local O2 store for me and ask if they have any O2 Joggler's left? |
| 10:49.03 | woglinde | lol |
| 10:49.09 | mindThomas | why lol |
| 10:49.35 | mindThomas | I'm doing many embedded electronics projects, and the joggler would really be a neat device to have |
| 10:55.15 | CIA-1 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * ree3347eea1 10openembedded.git/recipes/u-boot/ (2 files in 2 dirs): u-boot git: add patch to power on USB on beagleboard xM rev A |
| 11:07.07 | *** part/#oe mindThomas (~mind@exchangea1.holstebrots.dk) |
| 11:11.20 | *** join/#oe GNUtoo (~GNUtoo@host142-140-dynamic.45-79-r.retail.telecomitalia.it) |
| 11:15.15 | woglinde | hi gnutoo |
| 11:18.21 | GNUtoo | woglinde, hi |
| 11:20.20 | woglinde | hm tinderbox has still some problems? |
| 11:23.16 | *** join/#oe d_t_h (~dieter@p4FDEDDA4.dip.t-dialin.net) |
| 11:26.29 | ant_work | ericben: honestly I did not build in OE for x86 since years...no idea. Was it ok with klibc_1.5.17? |
| 11:29.26 | CIA-1 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * rdaf6cbd44e 10openembedded.git/conf/machine/beagleboard.conf: beagleboard: remove u-boot preferred version |
| 11:32.37 | ericben | ant_work: in fact I had an updated recipe for v86d that works and that I forget to push, so for your initial question : klibc's build is OK (but result not tested) for x86 |
| 11:34.35 | ericben | and I remember why I didn't push it : I removed klibc dependency for v86d and I'm using --with-x86emu for configure. I must find some time to test this more seriously |
| 11:37.02 | ant_work | fine, thx |
| 11:38.07 | ant_work | ericben: last question: DEFAULT_PREFERENCE_aquides = "1" in klibc_1.5.17. You are building for aquides ? Please note we bumped to 1_5.18, which has default preference now. |
| 11:39.11 | ericben | ant_work: you're right, I remove this line and test again |
| 11:39.11 | ant_work | klibc_1.5.17 (between other versions) is targeted for removal soon |
| 11:39.25 | ericben | btw : this line should not be there ;-) |
| 11:39.33 | ant_work | no need, you built 1.5.18 :) |
| 11:39.48 | ant_work | (if you had fresh pull) |
| 11:40.13 | ericben | you're right, I build 1.5.18-r14.1.5 |
| 11:40.24 | ant_work | JaMa|Wrk: would you pleas give a second check before we clean klibc? |
| 11:41.06 | *** join/#oe alecrim (~88a662a1@gateway/web/freenode/x-tkiawrpnczxhwkhb) |
| 11:46.12 | *** join/#oe marcosmamorim (~marcos@201-27-171-247.dsl.telesp.net.br) |
| 11:53.35 | ant_work | I would keep just klibc_1.5 and klibc_1.5.18 |
| 11:55.23 | *** join/#oe likewise (~likewise@188.201.28.66) |
| 12:01.21 | *** join/#oe shashi (~a0876501@nat/ti/x-zzllleecphfhhwxu) |
| 12:04.47 | *** join/#oe zecke (~ich@123-192-240-117.dynamic.kbronet.com.tw) |
| 12:05.03 | woglinde | jo zecke |
| 12:05.17 | zecke | hey |
| 12:05.57 | woglinde | so the plane didnt crash very good |
| 12:06.32 | zecke | woglinde: yeah... very good... and KLM has no people left to buy business class tickets... |
| 12:06.51 | zecke | woglinde: so they seated some lucky people there.. it was very comfortable. |
| 12:06.52 | woglinde | lol |
| 12:07.14 | woglinde | yeah heard it from other airlines too |
| 12:08.40 | zecke | woglinde: funny... the concept of Economy Comfort...seems to be the future. :) |
| 12:08.46 | woglinde | hm I hope we will have a new stable soon |
| 12:09.05 | woglinde | dont like the idea/tasks to backport recipes |
| 12:10.04 | zecke | woglinde: why a stable? |
| 12:11.53 | woglinde | or does stable run with the same dev stuff too? |
| 12:12.02 | woglinde | lile md5sums inside the recipe |
| 12:14.24 | ant_work | woglinde: as I understand it, once this last round of OE changes has settled and has been tested one new stable branch will be pinned |
| 12:14.48 | ant_work | unfortunately there are still some obscure issues (races) |
| 12:16.18 | woglinde | ant hm like the gtk+ stuff |
| 12:16.32 | ant_work | more |
| 12:17.13 | ant_work | some strange files created without permission sometimes |
| 12:17.27 | ant_work | then denix msg Re: [oe] Race condition in packaged staging? |
| 12:20.02 | JaMa|Wrk | woglinde: someone send patch to add checksums inside recipe to stable, but iirc wasn't ACKed enough/pushed |
| 12:20.37 | JaMa|Wrk | woglinde: but there are also changed .patch/.diff behavior in SRC_URI not available in stable |
| 12:22.10 | woglinde | jama right |
| 12:22.19 | woglinde | hm |
| 12:22.20 | woglinde | oh |
| 12:22.24 | woglinde | sure |
| 12:22.28 | woglinde | kergoth pushed it |
| 12:22.39 | woglinde | seems jalimo needs update too |
| 12:24.56 | *** join/#oe mickey|zzZZzz (~mickey@80.81.242.146) |
| 12:27.32 | *** join/#oe eFfeM_work (~frans@atwork-193.r-212.178.107.atwork.nl) |
| 12:27.46 | woglinde | re effem |
| 12:32.26 | ant_work | simply I think today stable and dev have diverged too much for any big backport |
| 12:32.41 | ant_work | still ok for small things |
| 12:33.13 | ant_work | but hey, when the new stable will be out (soon) the old stable will be old bitrot... |
| 12:33.30 | ant_work | so I'd say just wait |
| 12:35.27 | woglinde | hm the beagleboard xm looks nice |
| 12:37.31 | quitte_ | hi. is it possible to have dpkg instead of ipkg as the package manager on the target system? |
| 12:37.54 | woglinde | quitte hm why? |
| 12:38.00 | woglinde | and I think its not so easy |
| 12:38.02 | *** join/#oe GNUtoo (~GNUtoo@host142-140-dynamic.45-79-r.retail.telecomitalia.it) |
| 12:38.07 | woglinde | re gnutoo |
| 12:38.40 | GNUtoo | wifi issues,hi |
| 12:38.41 | quitte_ | woglinde: the last time i tried ipkg had too many packages and was too slow compared to dpkg on the same system |
| 12:38.48 | woglinde | hm |
| 12:38.59 | woglinde | wow how many packages do you need? |
| 12:39.05 | woglinde | try opkg instead of ipkg |
| 12:39.23 | quitte_ | hmm. |
| 12:39.28 | quitte_ | what's that? |
| 12:39.38 | woglinde | besides development on both's is somehow dead |
| 12:40.04 | *** join/#oe mithro (~tim@unaffiliated/mithro) |
| 12:40.14 | woglinde | hi mithro |
| 12:40.47 | GNUtoo | isn't there a busybox dpkg? |
| 12:40.56 | GNUtoo | too bad dpkg is not apt |
| 12:40.57 | woglinde | hm |
| 12:41.04 | woglinde | ????? |
| 12:41.36 | GNUtoo | by <GNUtoo> too bad dpkg is not apt I meant, too bad that dpkg doesn't do all what apt-get does |
| 12:41.50 | quitte_ | yes busybox has a very basic dpkg |
| 12:41.54 | GNUtoo | ok |
| 12:43.05 | *** join/#oe Proxyles (~henrik@nl118-171-71.student.uu.se) |
| 12:50.14 | *** join/#oe otavio (~otavio@debian/developer/otavio) |
| 12:51.18 | quitte_ | im having a hard time understanding oe and everything around it. bitbake is the piece of software that uses the metadata oe provides to help build software into packages? |
| 12:51.47 | woglinde | quitte right |
| 12:52.28 | quitte_ | ok. is the package generation a recipe that is called after every build finished, or how does that fit in? |
| 12:53.41 | woglinde | no its a task inside working on the recipe |
| 12:54.17 | quitte_ | so it's nothing bitbake has to do? |
| 12:54.23 | woglinde | you download, patch, ..., package-gen, |
| 12:54.28 | woglinde | not really |
| 12:54.40 | *** join/#oe mouss (~mouss@88.164.112.80) |
| 12:54.51 | woglinde | bitbake is choosing the pacakge genrating code for the packages you want |
| 12:54.53 | woglinde | thats all |
| 12:55.03 | woglinde | args type of packages |
| 12:55.07 | woglinde | I meant |
| 12:55.18 | quitte_ | so oe is nothing but metadata to bitbake? |
| 12:55.30 | woglinde | right |
| 12:56.02 | quitte_ | what are distributions? projects that take a subset of oe, build it and provide binaries? |
| 12:56.25 | woglinde | distributions choose the soft they want |
| 12:56.39 | woglinde | e.g special versions of some stuff |
| 12:56.57 | woglinde | e.g glibc 2.9 and gcc-4.3.3 |
| 12:57.16 | woglinde | and bluez4 instead of bluez3 |
| 12:57.20 | quitte_ | so i could think of a distribution of a bunch of settings for oe? |
| 12:57.30 | woglinde | yes |
| 12:58.39 | quitte_ | where does the cross toolchain come from? |
| 13:00.27 | ant_work | the native one is built at the beginning. You can use one external if you want. |
| 13:01.03 | woglinde | ant yoe mean the target one you can have external |
| 13:01.22 | woglinde | native toolchain besides canadian cross build is mostly external |
| 13:02.11 | quitte_ | great. i already have a toolchain. |
| 13:02.19 | *** join/#oe tmartins_ (~zero@187.37.59.148) |
| 13:02.32 | *** join/#oe methril_work (~Rafael@201.35.65.90) |
| 13:02.49 | quitte_ | i guess this means that i should find out if ipkg or opkg are that bad after all and then decide wether to figure out how to get dpkg in |
| 13:02.55 | woglinde | but there are some problems with external toolchain now |
| 13:03.02 | quitte_ | how does ipkg package management compare to apt? |
| 13:03.15 | ant_work | much lighter |
| 13:03.16 | woglinde | apt uses libdpkg in the end |
| 13:03.25 | quitte_ | woglinde: there are always problems, thats fine ;) |
| 13:03.45 | quitte_ | i don't care much for the weight of the package management |
| 13:04.08 | ant_work | quitte_: it all depends on the device you run on |
| 13:05.06 | ant_work | I pesonally love portage but is be a bit unpractical on embedded devices |
| 13:05.12 | ant_work | ;) |
| 13:05.37 | *** join/#oe aloisiojr (~aloisio@200.184.118.130) |
| 13:05.51 | quitte_ | ant_work: i have 3 target devices: openwrt style router with 8M flash - where i don't want on device package management, a 133mhz 32M ram 1G cf sh3 portable computer and a freerunner |
| 13:06.00 | *** join/#oe BenLauDC (~benlau@221.125.8.44) |
| 13:06.59 | ant_work | both seems too weak for apt (imho) |
| 13:07.02 | woglinde | quitte_ you can choose the micro distro |
| 13:07.07 | woglinde | for wrt |
| 13:07.22 | woglinde | which only install the packages into the images |
| 13:07.29 | woglinde | and then remove packages cruft |
| 13:07.49 | woglinde | so for updates you have to flash new |
| 13:09.49 | *** join/#oe etrunko (~edulima@187.106.38.192) |
| 13:11.04 | quitte_ | it sounds a lot like oe is pretty much what i want. thanks a lot for the clarifications |
| 13:11.58 | woglinde | quitte fine |
| 13:12.17 | quitte_ | except it not being intended for that - is there a reason to not build desktop systems with bitbake? |
| 13:12.34 | woglinde | no |
| 13:12.43 | woglinde | look at beagleboard-demo-image |
| 13:37.13 | *** join/#oe stefan_schmidt (~stefan@w1725.wlan.rz.tu-bs.de) |
| 13:51.14 | *** join/#oe RobotGuy (~n7pkt@pool-173-50-247-7.ptldor.fios.verizon.net) |
| 13:57.36 | *** join/#oe matgnt (~matthias@z0701.wist.uni-linz.ac.at) |
| 14:00.58 | quitte_ | there is no machine definition for the freerunner? |
| 14:01.31 | JaMa|Wrk | quitte_: om-gta02 |
| 14:01.55 | quitte_ | ah thanks |
| 14:04.50 | *** join/#oe GNUtoo (~GNUtoo@host142-140-dynamic.45-79-r.retail.telecomitalia.it) |
| 14:05.24 | GNUtoo | <PROTECTED> |
| 14:07.34 | *** join/#oe rsalveti (~rsalveti@200.184.118.136) |
| 14:09.41 | *** join/#oe etrunko (~edulima@187.106.38.192) |
| 14:12.43 | *** join/#oe dos1 (~dos@unaffiliated/dos1) |
| 14:14.39 | *** join/#oe rsalveti (~rsalveti@200.184.118.130) |
| 14:15.37 | *** join/#oe Nordh (~henrik@nl118-171-71.student.uu.se) |
| 14:16.30 | *** join/#oe jpereira (~jpereira@unaffiliated/jpereira) |
| 14:23.07 | XorA | Jay7: ping |
| 14:26.47 | *** join/#oe thaytan (~jan@ppp59-167-167-201.static.internode.on.net) |
| 14:37.58 | *** join/#oe GNUtoo (~GNUtoo@host142-140-dynamic.45-79-r.retail.telecomitalia.it) |
| 14:39.37 | quitte_ | what is a provider? |
| 14:39.50 | XorA | normally a bitbake recipe |
| 14:44.15 | JaMa|Wrk | ah finally shr-image built OK with inherited insanity (QA), only 3 patches needed |
| 14:44.16 | *** join/#oe methril_work (~Rafael@201.35.65.90) |
| 14:44.51 | *** join/#oe matgnt (~matthias@z0701.wist.uni-linz.ac.at) |
| 14:54.41 | CIA-1 | 03Martin Jansa <Martin.Jansa@gmail.com> 07org.openembedded.dev * r05c796f95b 10openembedded.git/recipes/shr/phonefsod_git.bb: |
| 14:54.41 | CIA-1 | phonefsod: add missing dependency on libfso-glib |
| 14:54.41 | CIA-1 | Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> |
| 14:54.46 | CIA-1 | 03Martin Jansa <Martin.Jansa@gmail.com> 07org.openembedded.dev * r455da13d9d 10openembedded.git/recipes/dbus/dbus-daemon-proxy_git.bb: |
| 14:54.46 | CIA-1 | dbus-daemon-proxy: don't ignore OE LDFLAGS |
| 14:54.46 | CIA-1 | * workaround for: ERROR: QA Issue with dbus-daemon-proxy: No GNU_HASH in the elf binary |
| 14:54.46 | CIA-1 | Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> |
| 14:54.51 | CIA-1 | 03Martin Jansa <Martin.Jansa@gmail.com> 07org.openembedded.dev * rdf677bc43a 10openembedded.git/recipes/dri/glamo-dri-tests_git.bb: |
| 14:54.51 | CIA-1 | glamo-dri-tests: hack CC variable to respect OE LDFLAGS |
| 14:54.51 | CIA-1 | * workaround for: ERROR: QA Issue with glamo-dri-tests: No |
| 14:54.52 | CIA-1 | GNU_HASH in the elf binary |
| 14:54.52 | CIA-1 | Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> |
| 14:54.52 | CIA-1 | 03Martin Jansa <Martin.Jansa@gmail.com> 07org.openembedded.dev * rf2949c20d2 10openembedded.git/recipes/freesmartphone/ (fso-specs_git.bb libfso-glib_git.bb): |
| 14:54.53 | CIA-1 | fso-specs: don't break QA while staging pkgconfig file |
| 14:54.53 | CIA-1 | * move STAGING_DIR_HOST prefix to recipes using it |
| 14:54.54 | CIA-1 | Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> |
| 15:03.43 | khem | JaMa|Wrk: my 4.5 built rfs did not boot :( udevd creates an OOM killer |
| 15:03.47 | khem | good morning all |
| 15:07.14 | hrw | hi khem |
| 15:14.53 | woglinde | hi khem |
| 15:14.58 | woglinde | its holiday |
| 15:17.42 | CIA-1 | 03Eric Bénard <eric@eukrea.com> 07org.openembedded.dev * r27cd889533 10openembedded.git/recipes/tslib/tslib_git.bb: |
| 15:17.42 | CIA-1 | tslib: add git version |
| 15:17.42 | CIA-1 | Signed-off-by: Eric Bénard <eric@eukrea.com> |
| 15:24.26 | melchior_ | is it advised or not to use swap memory in an embedded system ? Is is advised or not to part it on a sd card ? |
| 15:24.35 | *** join/#oe GNUtoo (~GNUtoo@host142-140-dynamic.45-79-r.retail.telecomitalia.it) |
| 15:26.54 | *** join/#oe thaytan (~jan@ppp59-167-167-201.static.internode.on.net) |
| 15:30.19 | *** join/#oe otavio (~otavio@debian/developer/otavio) |
| 15:32.48 | hrw | depends on card etc |
| 15:33.14 | hrw | if you expect big use of swap then card will die fast |
| 15:39.12 | *** join/#oe rob_w (~bob@pD95EBE09.dip.t-dialin.net) |
| 15:40.04 | mckoan | melchior_: http://en.wikipedia.org/wiki/Flash_memory#Memory_wear |
| 15:43.52 | XorA | has yet to kill an SD card through swapping |
| 15:44.59 | *** join/#oe drw (~dwilliams@cpe-76-187-85-68.tx.res.rr.com) |
| 15:54.41 | mckoan | bye |
| 15:58.30 | *** join/#oe aditya_111 (~Aditya@c-69-143-196-44.hsd1.md.comcast.net) |
| 16:00.49 | JaMa|Wrk | khem: here it worked on spitz, but then I've built image for freerunner (gta02) without -fno-ipa-sra and it fails in kernel already |
| 16:01.31 | JaMa|Wrk | khem: now I'm flashing another image this time with -fno-ipa-sra |
| 16:05.17 | *** join/#oe jic23 (~jic23@host86-134-239-243.range86-134.btcentralplus.com) |
| 16:06.33 | jic23 | Hi all. Anyone want to conjecture why a repository update (for last couple of days) means that bitbake can no longer find the linux-zigbee_git.bb recipe? |
| 16:06.49 | *** join/#oe Sleep_Walker (~Sleep@nat/novell/x-rzlozndhqemlychw) |
| 16:06.57 | hrw | have a nice rest of day |
| 16:08.13 | woglinde | nite hrw |
| 16:08.43 | blindvt | hi |
| 16:09.06 | blindvt | likes that "bitbake.conf: use := for BUILD_OS and BUILD_ARCH" :) |
| 16:09.18 | woglinde | hi blindvt |
| 16:10.18 | blindvt | soooo, any bitbake guru around that could help me out with persist_data (as just sent to the list)? |
| 16:10.23 | blindvt | woglinde, hi |
| 16:13.31 | blindvt | khem, i get odd build errors from busybox when i target arm (the htcdream sample machine in there) and gcc-4.5.0, FYI: http://paste.debian.net/75578/ |
| 16:16.34 | woglinde | blindvt hm do you have thumb support enabled? |
| 16:17.46 | blindvt | woglinde, no idea. my local.conf that trips it is this one: http://paste.debian.net/75579/ |
| 16:18.12 | JaMa | did someone see qt4-tools-native - 4.6.2 failing to do_configure because of missing libs which are available but probably missing -rpath param? http://tinderbox.openembedded.net/packages/590755/ |
| 16:18.16 | woglinde | hm okay saw on gcc opts |
| 16:18.19 | woglinde | its thumbsupport |
| 16:18.42 | woglinde | blindvt hm you could try as workaround to set the busybox to compile without thumbsupport |
| 16:18.49 | woglinde | maybee its helping |
| 16:19.23 | JaMa | blindvt: not the same issue, but please read http://gitorious.org/~jama/angstrom/jama-shr-experimental/commit/4307fb4d7ac1f894ca042720226e0c4ed201abe9 |
| 16:20.42 | woglinde | jama this looks like the g++ bug on sb2 too |
| 16:21.28 | woglinde | because you are linking here gcc compiled apps with g++ |
| 16:21.43 | woglinde | and somewho g++ dont get it right |
| 16:22.45 | blindvt | woglinde, oh, it could very well be that i blindly copied a different arm config and that it's set wrong in there |
| 16:23.25 | woglinde | blindvt hm |
| 16:23.30 | woglinde | but gcc could be broken too |
| 16:23.45 | JaMa | woglinde: are you talking about busybox issue or qt4-tools-native? |
| 16:24.04 | woglinde | jama qt4 |
| 16:24.18 | blindvt | woglinde, unfortunately all those machine settings are not handled properly -- i.e. not at all. They are machine specific and should be taken from the machine, not per configfile-snippet :( |
| 16:24.30 | *** join/#oe GNUtoo|oeee (~GNUtoo@host142-140-dynamic.45-79-r.retail.telecomitalia.it) |
| 16:24.42 | woglinde | blindvt send patches |
| 16:24.51 | JaMa | woglinde: but strange that on similar setup I've built qt4-tools-native ok |
| 16:25.03 | zecke | JaMa: are you using gcc to link? |
| 16:25.26 | blindvt | woglinde, yea, i've started to do that for uClibc. busybox needs the same massage |
| 16:25.32 | woglinde | zecke its the qt configure |
| 16:25.34 | JaMa | woglinde: and similar I mean the same OE, only host wasn't minimalistic chroot (so maybe libs were used from host instead) |
| 16:26.15 | woglinde | jama hm |
| 16:26.22 | woglinde | damn qt configure script |
| 16:26.34 | woglinde | I hate it since years |
| 16:27.33 | JaMa | woglinde: and I'm 80% sure it worked in my minimalistic chroot too (maybe few weeks ago) |
| 16:27.38 | zecke | JaMa: ask a workaround, can you try to pass -embedded for the qt4-tools-native? |
| 16:28.18 | JaMa | I'll try in a minute |
| 16:28.23 | woglinde | zecke ieeks using in the insecure shipped libs from qt? |
| 16:28.42 | zecke | woglinde: for native? well they are not so insecure? |
| 16:28.52 | woglinde | zecke dont know |
| 16:29.04 | woglinde | why configure has to check libjpeg and stuff |
| 16:29.47 | zecke | woglinde: we start a normal build but we only want uic, moc, rcc, qmake |
| 16:29.49 | JaMa | I tried to replace configuration params to use shipped libs yesterday (without luck) |
| 16:30.13 | zecke | so for all these tools... using Qt/E would be just fine. |
| 16:30.30 | woglinde | zecke ah okay |
| 16:30.51 | woglinde | I thought you meant qt should use the libs it ships in the 3rd-party dir |
| 16:31.53 | *** join/#oe stefan_schmidt (~stefan@p5B037F06.dip.t-dialin.net) |
| 16:32.06 | *** join/#oe darkschneider (~gab@93-32-37-133.ip31.fastwebnet.it) |
| 16:35.36 | JaMa | zecke: passed do_configure fine with -embedded, thanks |
| 16:36.53 | woglinde | re stefan |
| 16:37.14 | woglinde | *g* |
| 16:37.19 | woglinde | dirty trick |
| 16:37.31 | woglinde | now the configure script dont search x-stuff |
| 16:38.05 | stefan_schmidt | re |
| 16:38.51 | CIA-1 | 03Stefan Schmidt <stefan@buglabs.net> 07org.openembedded.dev * rab0265a8eb 10openembedded.git/conf/machine/bug20.conf: |
| 16:38.51 | CIA-1 | bug20.conf: Sync with Bug Labs repo |
| 16:38.51 | CIA-1 | This brings the bug20 machine file in sync with the Bug Labs internal version. |
| 16:38.51 | CIA-1 | The difference was only ubi as FSTYPE and some jffs2 tweaking. |
| 16:38.52 | CIA-1 | 03Stefan Schmidt <stefan@buglabs.net> 07org.openembedded.dev * r55f3c701b2 10openembedded.git/recipes/linux/linux-bug_2.6.27.2.bb: |
| 16:38.52 | CIA-1 | linux-bug_2.6.27.2.bb: Fix install. |
| 16:38.53 | CIA-1 | We have been in trying to copy the files from the wrong base dir resulting |
| 16:38.53 | CIA-1 | in a file not found. Starting from ${S} is the right path. |
| 16:39.01 | JaMa | zecke: and failed a bit later in do_configure :/ http://tinderbox.openembedded.net/packages/590759/ |
| 16:39.12 | JaMa | s/do_configure/do_compile/ |
| 16:39.18 | *** join/#oe rhc (~matt@qnan.org) |
| 16:40.20 | woglinde | jama check if freetype-native was build |
| 16:41.09 | *** join/#oe thaytan (~jan@ppp59-167-167-201.static.internode.on.net) |
| 16:41.29 | JaMa | it wasn't, already building qt4-tools-native again |
| 16:43.34 | zecke | JaMa: you should be able to disable freetype. |
| 16:44.00 | woglinde | zecke sure it isnt need for native tools? |
| 16:44.49 | zecke | woglinde: yes |
| 16:45.42 | woglinde | okay |
| 16:46.23 | JaMa | good, because it failed even with freetype-native built :) |
| 16:50.12 | *** join/#oe morphis (~morphis@p5489E4AA.dip.t-dialin.net) |
| 16:51.16 | jic23 | Hi all, anyone have a clue why bitbake linux-zigbee is giving me Nothing PROVIDES |
| 16:52.12 | JaMa | jic23: do you have machine imote2? |
| 16:52.29 | jic23 | yup |
| 16:52.48 | jic23 | it was working just fine before I did a pull today, but I can't seem to find any relevant changes. |
| 16:53.22 | jic23 | gah. I'm not building for the imote2 today. doh |
| 16:53.46 | jic23 | need to add stargate2 to that recipe. Good call JaMa! |
| 16:54.05 | *** join/#oe xjqian (~gordon@mir-nil-pat-118-150.wustl.edu) |
| 17:06.32 | *** join/#oe Sleep_Walker (~Sleep@nat/novell/x-bamnazkaicxcoqsi) |
| 17:08.38 | JaMa | hmm even with "-embedded -no-fontconfig" qt4-tools-native is still failing :/, gtg |
| 17:16.53 | *** join/#oe shazkhan (~shaz@116.71.221.109) |
| 17:25.01 | *** join/#oe mickey|zzZZzz (~mickey@openmoko/coreteam/mickey) |
| 17:29.50 | *** join/#oe kristoffer (~kristoffe@95.209.179.166.bredband.tre.se) |
| 17:32.09 | Jay7 | samsung is hiring |
| 17:33.47 | Jay7 | http://job.samsung.ru/vacancies.aspx |
| 17:37.58 | *** join/#oe orges (~yet@94.55.184.222) |
| 17:40.49 | *** join/#oe ZeeD (~ZeeD@83.249.249.122) |
| 17:43.58 | *** join/#oe matgnt1 (~matthias@194.48.133.8) |
| 17:45.58 | *** join/#oe dos1 (~dos@unaffiliated/dos1) |
| 17:49.15 | *** join/#oe LeTama (~IceChat7@82.228.252.90) |
| 18:03.49 | *** join/#oe CMoH-notebook (~cipi@95.76.71.81) |
| 18:11.31 | *** join/#oe florian (~fuchs@Maemo/community/contributor/florian) |
| 18:13.28 | florian | re |
| 18:21.14 | *** join/#oe Spz0 (~a@97-120-172-230.ptld.qwest.net) |
| 18:23.55 | *** join/#oe toi (~toi@d54C2AA76.access.telenet.be) |
| 18:33.16 | *** join/#oe dos1 (~dos@unaffiliated/dos1) |
| 18:36.40 | *** join/#oe shazkhan (~shaz@119.153.19.9) |
| 18:41.31 | Jay7 | florian: LTG projects is broken |
| 18:42.22 | Jay7 | http://projects.linuxtogo.org/ -> 500: Internal Server Error |
| 18:42.48 | florian | Jay7: nasty :-( |
| 18:43.02 | florian | cant do much about it right now |
| 19:02.41 | *** join/#oe dos1 (~dos@unaffiliated/dos1) |
| 19:34.35 | *** join/#oe otavio (~otavio@debian/developer/otavio) |
| 19:35.01 | *** join/#oe JaMa (~martin@161-24.13.24.78.awnet.cz) |
| 19:41.49 | *** join/#oe kergoth (~kergoth@ip24-251-170-95.ph.ph.cox.net) |
| 19:45.02 | *** join/#oe eFfeM (~frans@j200125.upc-j.chello.nl) |
| 19:51.20 | *** join/#oe aditya_111 (~Aditya@c-69-143-196-44.hsd1.md.comcast.net) |
| 19:52.35 | *** join/#oe GNUtoo|oeee (~GNUtoo@host203-158-dynamic.25-79-r.retail.telecomitalia.it) |
| 19:59.55 | *** join/#oe aditya_1111 (~Aditya@c-69-143-196-44.hsd1.md.comcast.net) |
| 20:22.47 | *** join/#oe mgross (~mgross@74.85.239.23) |
| 20:24.10 | *** join/#oe Spz0 (~jonez@97-120-172-230.ptld.qwest.net) |
| 20:28.40 | *** join/#oe ant__ (~andrea@host98-249-dynamic.4-87-r.retail.telecomitalia.it) |
| 20:28.48 | CIA-1 | 03Khem Raj <raj.khem@gmail.com> 07org.openembedded.dev * rb477024589 10openembedded.git/recipes/gcc/ (14 files in 2 dirs): (log message trimmed) |
| 20:28.48 | CIA-1 | gcc-4.5: rename 4.5.0 to 4.5 and update to latest svn revision. |
| 20:28.48 | CIA-1 | * GCC 4.5.0 has issues with arm that the resulting root file system is |
| 20:28.48 | CIA-1 | not bootable. These are fixed upstream which would become 4.5.1 |
| 20:28.49 | CIA-1 | so rename the recipes to 4.5 and use the svn revision to get the |
| 20:28.52 | CIA-1 | latest branch snapshot. |
| 20:28.52 | CIA-1 | * If some one wants to use it then it could be chosen by |
| 20:46.11 | ant__ | khem: ping |
| 21:10.23 | *** join/#oe hansdampf (~moritz@212.77.183.239) |
| 21:12.24 | CIA-1 | 03Andrea Adami <andrea.adami@gmail.com> 07org.openembedded.dev * r89c8847b89 10openembedded.git/recipes/klibc/ (35 files in 6 dirs): |
| 21:12.24 | CIA-1 | klibc: major clean out of intermediate recipes. |
| 21:12.24 | CIA-1 | * keep klibc_1.5 (first prototype) |
| 21:12.24 | CIA-1 | * keep up-to-date klibc_1.5.18 patched to compile with 2.6.2x and 2.6.3x |
| 21:12.25 | CIA-1 | * runtime tested on armv5te |
| 21:24.08 | *** join/#oe likewise (~likewise@84-106-116-232.cable.quicknet.nl) |
| 21:27.24 | *** join/#oe woglinde (~heinold@g225006173.adsl.alicedsl.de) |
| 21:27.31 | ant__ | wb woglinde |
| 21:27.39 | woglinde | jo |
| 21:27.42 | woglinde | re |
| 21:33.40 | *** join/#oe matgnt (~matthias@z0701.wist.uni-linz.ac.at) |
| 21:36.09 | *** join/#oe likewise (~likewise@84-106-116-232.cable.quicknet.nl) |
| 21:42.50 | *** join/#oe Martin-B (~martin@pool-61-67-198-89.dbd-ipconnect.net) |
| 21:49.47 | *** join/#oe GNUtoo (~GNUtoo@host138-151-dynamic.11-79-r.retail.telecomitalia.it) |
| 21:54.55 | *** join/#oe aditya_111 (~Aditya@c-69-143-196-44.hsd1.md.comcast.net) |
| 21:57.17 | *** join/#oe woglinde_ (~heinold@f052236172.adsl.alicedsl.de) |
| 21:58.08 | *** join/#oe marcosmamorim (~marcos@201-68-109-83.dsl.telesp.net.br) |
| 22:10.45 | *** join/#oe likewise (~likewise@84-106-116-232.cable.quicknet.nl) |
| 22:15.55 | *** join/#oe Gaston|Home (~Miranda@c-012fe353.155-1-64736c11.cust.bredbandsbolaget.se) |
| 22:59.53 | *** join/#oe mgross (~mgross@74.85.239.23) |
| 23:17.34 | *** join/#oe auntie (~rewt@97-121-51-120.bois.qwest.net) |
| 23:18.30 | *** join/#oe grg (~grg@eth7090.sa.adsl.internode.on.net) |
| 23:25.04 | *** join/#oe auntie (~rewt@97-121-44-190.bois.qwest.net) |
| 23:36.14 | *** join/#oe waite (~quassel@c-24-91-81-44.hsd1.ma.comcast.net) |
| 23:48.32 | *** join/#oe BenLauDC (~benlau@221.125.8.44) |
| 23:50.05 | *** join/#oe rsalveti (~rsalveti@187.113.115.174) |
| 23:57.19 | *** join/#oe aditya_111 (~Aditya@c-69-143-196-44.hsd1.md.comcast.net) |