| 00:02.37 | GNUtoo | rphillips, are you still there |
| 00:02.39 | GNUtoo | ? |
| 00:04.30 | GNUtoo | rphillips, because I think I've the solution |
| 00:04.41 | GNUtoo | you need to bump PR of that recipe too: |
| 00:05.11 | GNUtoo | task-base.bb |
| 00:05.15 | GNUtoo | at least it seems |
| 00:05.20 | GNUtoo | I'll test the result |
| 00:12.45 | *** join/#oe aloisiojr (~aloisio@200.184.118.130) |
| 00:12.59 | *** join/#oe daq4th (~darkness@v062.natpool.sourcentral.org) |
| 00:16.50 | *** join/#oe mrec (~mrec@sundtek.de) |
| 00:25.36 | *** join/#oe playya__ (~playya@unaffiliated/playya) |
| 01:00.25 | *** join/#oe JDuke128 (~kadir@81.214.22.138) |
| 01:01.50 | *** part/#oe III (~orb@pool-96-226-214-14.dllstx.fios.verizon.net) |
| 01:07.38 | CIA-85 | 03Denis 'Gnutoo' Carikli <GNUtoo@no-log.org> 07org.openembedded.dev * r4facd26dbd 10openembedded.git/conf/machine/eee701.conf: (log message trimmed) |
| 01:07.38 | CIA-85 | eee701 machine config: fix to use xorg instead of kdrive |
| 01:07.38 | CIA-85 | eFfeM pointed me out that he had a Xvesa binary in his xf46-image, |
| 01:07.38 | CIA-85 | for eeepc701 and no Xorg. |
| 01:07.38 | CIA-85 | So I investigated and found that: |
| 01:07.38 | CIA-85 | In eee701.conf there were ?= for XSERVER and |
| 01:07.38 | CIA-85 | PREFERRED_PROVIDER_virtual/xserver |
| 01:07.39 | CIA-85 | 03Denis 'Gnutoo' Carikli <GNUtoo@no-log.org> 07org.openembedded.dev * r0911f0ad43 10openembedded.git/conf/machine/bug.conf: |
| 01:07.40 | CIA-85 | bug.conf : depends on kernel-modules |
| 01:07.40 | CIA-85 | Most users would want all modules,moreover some modules are needed |
| 01:07.41 | CIA-85 | for framebuffer |
| 01:07.41 | CIA-85 | 03Denis 'Gnutoo' Carikli <GNUtoo@no-log.org> 07org.openembedded.dev * r8d9d0507c0 10openembedded.git/recipes/e17/ (entrance/rebased_config-db.patch entrance_0.9.0.010.bb): |
| 01:07.42 | CIA-85 | entrance: rebased config.db |
| 01:07.42 | CIA-85 | The config.db seem to be some openembedded settings/configuration, |
| 01:07.43 | CIA-85 | for launching entrance/e17 better |
| 01:07.43 | CIA-85 | 03Denis 'Gnutoo' Carikli <GNUtoo@no-log.org> 07org.openembedded.dev * r60af72f1af 10openembedded.git/recipes/images/e-image-core.bb: (log message trimmed) |
| 01:07.55 | CIA-85 | 03Denis 'Gnutoo' Carikli <GNUtoo@no-log.org> 07org.openembedded.dev * rcb40fbe4b6 10openembedded.git/conf/machine/bug.conf: |
| 01:07.55 | CIA-85 | bug.conf: added screen resolution |
| 01:07.56 | CIA-85 | some recipes depend on MACHINE_DISPLAY_WIDTH_PIXELS and MACHINE_DISPLAY_HEIGHT_PIXELS |
| 01:07.56 | CIA-85 | like wesnoth for instance |
| 01:07.57 | CIA-85 | 03Denis 'Gnutoo' Carikli <GNUtoo@no-log.org> 07org.openembedded.dev * r0af03b94cd 10openembedded.git/recipes/tasks/task-base.bb: |
| 01:07.57 | CIA-85 | task-base : bump PR because bug.conf changed(details below) |
| 01:07.58 | CIA-85 | kernel-modules was added to MACHINE_EXTRA_RRECOMMENDS in bug.conf, |
| 01:07.58 | CIA-85 | But without bumping the PR of task-base it wouldn't include |
| 01:07.59 | CIA-85 | the kernel modules into the image |
| 01:08.00 | CIA-85 | 03Denis 'Gnutoo' Carikli <GNUtoo@no-log.org> 07org.openembedded.dev * r8a145683d6 10openembedded.git/recipes/e17/entrance_0.9.0.010.bb: |
| 01:08.00 | CIA-85 | entrance: run autopoint in order to cope with lacking ./config.rpath |
| 01:08.01 | CIA-85 | At first I had a bad hack for it,thanks JaMa for showing me how to |
| 01:08.01 | CIA-85 | do it(pointing at one of your commits that did it) |
| 01:08.02 | CIA-85 | 03Denis 'Gnutoo' Carikli <GNUtoo@no-log.org> 07org.openembedded.dev * r5635777f38 10openembedded.git/recipes/images/illume-image.bb: (log message trimmed) |
| 01:08.02 | CIA-85 | illume-image: comment additional phone functionality(zhone already commented) |
| 01:08.03 | CIA-85 | (13 lines omitted) |
| 01:12.25 | *** join/#oe bbradley_ (~bbradley@87-194-119-230.bethere.co.uk) |
| 01:14.39 | *** join/#oe FOM (~jeffs@rrcs-74-219-98-62.central.biz.rr.com) |
| 01:26.29 | *** join/#oe AndChat (~AndChat@cpe-76-187-64-213.tx.res.rr.com) |
| 01:28.50 | *** join/#oe recalcati (~5d9011c7@gateway/web/freenode/x-rmdqxffslowtwhoz) |
| 01:28.54 | recalcati | g.m. |
| 01:29.50 | recalcati | apt get PACKAGE MANAGER seems to be used only in task-mamona-base.bb . So I guess is good to use opkg on my system, right? |
| 02:07.12 | *** join/#oe grma (~gruberm@chello212186029093.tirol.surfer.at) |
| 02:08.09 | *** join/#oe hufnus_cicq (~hufnus_ci@69-12-177-67.dsl.static.sonic.net) |
| 02:14.16 | *** join/#oe marex (~marex@vasut.kolej.mff.cuni.cz) |
| 02:15.21 | *** join/#oe marcosmamorim (~marcos@200-158-247-71.dsl.telesp.net.br) |
| 02:23.00 | recalcati | How can I receive on my mail openembedded-devel mailing list messages? I'm already subscribed, but I don't know how to enable this feature |
| 03:05.03 | *** join/#oe wicknix (~wicked@73.63-135-128.netnet.net) |
| 03:38.23 | *** join/#oe rwhitby (~rwhitby@nslu2-linux/rwhitby) |
| 04:03.01 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 04:32.27 | *** join/#oe III (~orb@pool-96-226-214-14.dllstx.fios.verizon.net) |
| 04:33.56 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 05:02.58 | *** join/#oe CeidaFighter (~ceidafigh@85.107.154.247) |
| 05:03.43 | CeidaFighter | hi , how can i remove "X cursor" on angstrom ? where its source code located ? i just want to remove "X cursor" |
| 05:05.13 | probonono | mtd-utils_1.2.0+git.bb do_populate_staging failed .... stage-manager, line 34, in read_cache cache[data[0]]['ts'] = int(data[1]) IndexError: list index out of range |
| 05:06.33 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 05:08.02 | probonono | Anyone have any ideas about this error? Is that cache just the bitbake cache? |
| 05:08.11 | *** join/#oe CeidaFighter (~556b9af7@gateway/web/freenode/x-bqkrsgeoycwqigiz) |
| 05:10.40 | CeidaFighter | Hi , i want to remove "X cursor" displayed on boot of X window system.I tried xsetroot , setterm etc.. some succeeded but i cant hide it to shown on boot.IT shown few seconds.I want to hide it forever solution. I'm using Angstrom Linux , i've compiled kernel by bitbake , how can i remove "X Cursor" from source code ? which file its stored on ? Someone have idea where this "X cursor" comes from source code of Linux ? |
| 05:16.31 | *** join/#oe polyonymous (hacker@hackele-1-pt.tunnel.tserv6.fra1.ipv6.he.net) |
| 05:36.54 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 05:42.31 | *** join/#oe sudharsh__ (~sudharsh@122.165.60.90) |
| 05:45.35 | *** join/#oe dijenerate (~dijenerat@64.210.44.37) |
| 06:08.18 | *** join/#oe mrc3 (~mrc3@nat/ti/x-ipntnphrnwlznpwe) |
| 06:08.27 | *** join/#oe jkridner (~a0321898@pdpc/supporter/active/jkridner) |
| 06:16.24 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 06:35.29 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 06:59.47 | *** join/#oe sudharsh__ (~sudharsh@59.92.88.244) |
| 08:04.32 | *** join/#oe GNUtoo (~GNUtoo@host227-136-dynamic.17-79-r.retail.telecomitalia.it) |
| 08:05.02 | GNUtoo | hi,should I revert this commit: |
| 08:05.44 | GNUtoo | a4124738f4b572c37ff6d082c7decf7387cde1d2 |
| 08:05.48 | GNUtoo | it's this one: |
| 08:05.56 | GNUtoo | wesnoth: only compile tiny GUI when screen is smaller than 800x480(smallgui) |
| 08:11.25 | GNUtoo | I'll revert |
| 08:17.38 | CIA-85 | 03Denis 'Gnutoo' Carikli <GNUtoo@no-log.org> 07org.openembedded.dev * r4a0b75c5a0 10openembedded.git/recipes/wesnoth/wesnoth_1.6.5.bb: |
| 08:17.38 | CIA-85 | Revert "wesnoth: only compile tiny GUI when screen is smaller than 800x480(smallgui)" |
| 08:17.38 | CIA-85 | This reverts commit a4124738f4b572c37ff6d082c7decf7387cde1d2. |
| 08:17.38 | CIA-85 | We shouldn't make use of USE flags-like functionalities in non machine feeds, |
| 08:17.39 | CIA-85 | And we can't put every recipe in machine feed. |
| 08:17.39 | CIA-85 | I think the best way is to do a wesnoth-highres recipe |
| 08:22.23 | *** join/#oe dvermd (~roudoudou@78.234.93.192) |
| 08:29.08 | *** join/#oe sudharsh__ (~sudharsh@59.92.88.244) |
| 08:31.42 | *** join/#oe Heinervdm (~thomas@pD9E15F68.dip.t-dialin.net) |
| 08:32.34 | *** join/#oe dth_ntb (~dieter@p4FDEEC95.dip.t-dialin.net) |
| 08:44.17 | *** join/#oe sudharsh__ (~sudharsh@59.92.88.244) |
| 08:46.33 | *** join/#oe eFfeM (~frans@j200125.upc-j.chello.nl) |
| 08:48.02 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 08:50.30 | *** join/#oe recalcati (~5d9011c7@gateway/web/freenode/x-nacaissbuwxdhsif) |
| 08:50.37 | recalcati | good morning |
| 08:51.56 | recalcati | I have a git mirror of the kernel. How to fetch from it? In ssh . ssh://user@ipaddress/pathtogit;protocol=git;branch=master but ssh has password .. |
| 08:51.59 | recalcati | any idea? |
| 08:54.38 | *** join/#oe sudharsh__ (~sudharsh@59.92.88.244) |
| 08:59.22 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 09:04.08 | *** join/#oe sudharsh__ (~sudharsh@59.92.88.244) |
| 09:08.24 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 09:10.08 | mckoan | good morning |
| 09:11.06 | mckoan | recalcati: what do you mean? |
| 09:11.14 | recalcati | hi |
| 09:11.31 | recalcati | I write slow due to my daughter |
| 09:11.50 | recalcati | it mean we have a git tree |
| 09:12.06 | recalcati | I want to fetch from it using ssh |
| 09:12.27 | recalcati | also I sent now a post to ml |
| 09:13.08 | recalcati | because git repo can be on the same pc when we develop |
| 09:13.23 | recalcati | because git repo can be also on the same pc when we develop |
| 09:14.06 | mckoan | looks like you are OT here :-) |
| 09:14.34 | mckoan | why password is aprblem for you, it's normal with ssh |
| 09:15.17 | eFfeM | mckoan: indeed OT, recalcati you can disable the password, google for "ssh without password", plenty of pages (e.g. this one: http://linuxproblem.org/art_9.html ) should not be too difficicult :-) |
| 09:15.37 | mckoan | recalcati: Irssi: #git: Total of 554 nicks |
| 09:17.41 | recalcati | eFfeM: I tried. but on my stupid pc I have problem with ssh certificate. normally it works. anyway, most important is doing do fetch from local git directory. to integrate my git tree with OE compilation |
| 09:18.54 | recalcati | and I need in my company irssi and git and something else proxy |
| 09:20.11 | mckoan | recalcati: I opened a private channel can you see me? |
| 09:28.08 | *** join/#oe anichiest (~kvirc@207-255-143-181-dhcp.bfd.pa.atlanticbb.net) |
| 09:30.07 | *** join/#oe hansdampf (~moritz@rgnb-4d04b9a1.pool.mediaWays.net) |
| 09:38.50 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 09:52.38 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 09:54.15 | eFfeM | hrw|gone: there it comes: |
| 09:54.26 | CIA-85 | 03Frans Meulenbroeks <fransmeulenbroeks@gmail.com> 07org.openembedded.dev * r5de6603a8d 10openembedded.git/ (4 files in 4 dirs): |
| 09:54.26 | CIA-85 | linux-kirkwood: made utf8 the default NLS |
| 09:54.26 | CIA-85 | Made utf8 the default NLS (as suggested by hrw). |
| 09:54.26 | CIA-85 | Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> |
| 09:55.00 | eFfeM | this is for sheevaplug/openrd base/openrd client (shoudl probably made that explicit in the commit message, oh well) |
| 09:58.42 | *** join/#oe kristoffer (~kristoffe@109.58.22.245.bredband.tre.se) |
| 10:11.34 | *** join/#oe probonono (~User@unaffiliated/probonono) |
| 10:21.33 | recalcati | bye bye .. |
| 10:22.16 | recalcati | I promise not be annoying in the future!!! |
| 10:25.21 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 10:30.20 | *** join/#oe cbrake (~cbrake@oh-69-34-21-229.sta.embarqhsd.net) |
| 10:34.14 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 10:45.55 | *** join/#oe Hasse_ (~quassel@0x5552e721.adsl.cybercity.dk) |
| 10:47.38 | *** join/#oe sudharsh__ (~sudharsh@59.92.88.244) |
| 10:57.16 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 10:57.37 | *** join/#oe Weaselweb (~quassel@2001:6f8:9e4:123:21a:92ff:fe5a:1409) |
| 10:58.35 | *** join/#oe B_Lizzard (~havoc@athedsl-423345.home.otenet.gr) |
| 11:02.09 | *** join/#oe sudharsh__ (~sudharsh@59.92.88.244) |
| 11:05.27 | *** join/#oe stefan_schmidt (~stefan@p5B0358BB.dip.t-dialin.net) |
| 11:12.53 | *** join/#oe sudharsh__ (~sudharsh@59.92.88.244) |
| 11:17.31 | mckoan | have a nice weekend |
| 11:17.45 | *** join/#oe Laibsch (~Laibsch@p5B3B2B8E.dip.t-dialin.net) |
| 11:26.11 | *** join/#oe dos1 (~dos@unaffiliated/dos1) |
| 11:26.15 | *** join/#oe Martin-B (~martin@pool-199-66-198-89.dbd-ipconnect.net) |
| 11:28.08 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 11:31.25 | *** join/#oe sudharsh__ (~sudharsh@59.92.88.244) |
| 11:43.20 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 11:52.18 | *** join/#oe sudharsh__ (~sudharsh@59.92.88.244) |
| 11:57.43 | eFfeM | GNUtoo: just build xfce46-image for eee701, but there is still no xinit. X link is there |
| 11:58.12 | eFfeM | I'm populating the card now, and will have a look at it, might be later today as I'm away for a while this afternoon |
| 11:59.27 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 12:02.32 | *** join/#oe toi (~toi@d54C2A96D.access.telenet.be) |
| 12:05.16 | *** join/#oe sudharsh__ (~sudharsh@59.92.88.244) |
| 12:07.38 | GNUtoo | eFfeM, ok I knew that only X was fixed |
| 12:07.49 | GNUtoo | one thing at a time |
| 12:08.03 | GNUtoo | else I keep hacking and never commits |
| 12:08.53 | *** join/#oe siji (~siji@122.170.9.183) |
| 12:09.30 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 12:09.49 | siji | hi all |
| 12:09.58 | siji | eFfem,hi |
| 12:10.40 | siji | am getting this error while trying to bitbake |
| 12:10.41 | siji | /proc/sys/vm/mmap_min_addr is not 0. This will cause problems with qemu so please fix the value (as root). |
| 12:10.41 | siji | To fix this in later reboots, set vm.mmap_min_addr = 0 in /etc/sysctl.conf. |
| 12:10.51 | siji | how to fix it |
| 12:13.43 | eFfeM | siji what about reading the message instead of just pasting it, and do what it says ????? |
| 12:14.01 | siji | I did all |
| 12:14.03 | siji | :( |
| 12:14.12 | siji | that's why i asked |
| 12:14.19 | siji | I tried both ways |
| 12:14.23 | eFfeM | i fyou change sysctl.conf and reboot it will be gone |
| 12:14.29 | siji | i did it |
| 12:14.50 | siji | bt not gone |
| 12:14.55 | blindvt | siji, so what does sysctl vm.mmap_min_addr say now? |
| 12:14.56 | GNUtoo | siji, do you have selinux? |
| 12:15.04 | eFfeM | and if as root you do echo 0 > /proc/sys/vm/mmap_min_addr the issue is also gone |
| 12:15.10 | *** join/#oe toi (~toi@d54C2A96D.access.telenet.be) |
| 12:15.11 | eFfeM | you cn cat /proc/sys/vm/mmap_min_addr to verify |
| 12:15.17 | siji | ok let me see |
| 12:15.34 | siji | oh it's not chaged |
| 12:15.36 | siji | changed |
| 12:16.04 | GNUtoo | siji, do you run fedora or have selinux running with a recent kernel? |
| 12:16.11 | siji | no |
| 12:16.15 | siji | Ubuntu 9.04 |
| 12:16.18 | GNUtoo | ok |
| 12:16.25 | GNUtoo | mmm |
| 12:16.34 | blindvt | siji, so set it to e.g. 64k boundary or the like |
| 12:16.35 | *** join/#oe bbradley (~bbradley@87-194-119-230.bethere.co.uk) |
| 12:16.36 | GNUtoo | I must look in the mailing list |
| 12:17.15 | siji | blindvt, ? |
| 12:18.05 | blindvt | siji, read my question above, then read man sysctl and set it to 64k |
| 12:18.17 | siji | ok |
| 12:18.39 | siji | vm.mmap_min_addr = 4097 |
| 12:18.53 | *** join/#oe Hasse_ (~quassel@0x5552e721.adsl.cybercity.dk) |
| 12:19.19 | blindvt | siji, sysctl is too handly to blindly give your the syntax. you should grok it, just takes 3 minutes at most |
| 12:19.20 | GNUtoo | look for mmap at http://lists.linuxtogo.org/pipermail/openembedded-devel/2010-January/subject.html |
| 12:19.33 | GNUtoo | there is a problem with 2.6.33+ kernel |
| 12:19.33 | siji | ok |
| 12:19.43 | GNUtoo | do you run such kernels? |
| 12:19.50 | siji | 2.6.28-14-generic |
| 12:22.38 | GNUtoo | mmm |
| 12:23.08 | GNUtoo | strange then |
| 12:23.21 | GNUtoo | were you root when you did echo 0 > /proc/sys/vm/mmap_min_addr |
| 12:23.45 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 12:24.12 | siji | while doing echo it's giving the error permission denied |
| 12:24.18 | siji | even from root too |
| 12:24.58 | siji | GNUtoo, Recenlty I recompiled my kernel , is it cose of that |
| 12:25.13 | GNUtoo | mmm |
| 12:25.20 | GNUtoo | don't know...maybe |
| 12:25.27 | siji | ok |
| 12:25.38 | *** join/#oe sudharsh__ (~sudharsh@59.92.88.244) |
| 12:27.07 | GNUtoo | siji, , Low address space to protect from user allocation (DEFAULT_MMAP_MIN_ADDR) |
| 12:27.16 | GNUtoo | that's in make xconfig |
| 12:27.28 | JaMa | siji: maybe ubuntu backported that patch mentioned in that email |
| 12:27.36 | siji | ok |
| 12:28.28 | eFfeM | GNUtoo: need to fix the booting again (while cleaning the card wiped the grub dir too :-( ) need to go now will look at it later |
| 12:28.28 | JaMa | siji: if you have qemu new enough (0.12 will do) you can remove that sanity check and add ASSUME_PROVIDED for qemu in your local.conf |
| 12:28.50 | GNUtoo | eFfeM-away, ok |
| 12:28.56 | blindvt | siji, or to 0, depending on your qemu. Relying on proc being there isn't sane either way |
| 12:29.28 | siji | let me try this |
| 12:30.09 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 12:32.25 | *** join/#oe Sleep_Walker (~Sleep@193.179.96.131) |
| 12:36.45 | GNUtoo | siji, oe as I said you could recompile your kernel with DEFAULT_MMAP_MIN_ADDR set to 0 |
| 12:36.49 | *** join/#oe pb__ (~pb@85.210.8.8) |
| 12:37.37 | siji | oh ... |
| 12:37.39 | siji | ok |
| 12:37.53 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 12:40.14 | *** join/#oe sudharsh__ (~sudharsh@59.92.88.244) |
| 12:56.42 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 12:59.52 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 13:03.19 | *** join/#oe sudharsh__ (~sudharsh@59.92.88.244) |
| 13:05.40 | *** join/#oe toi (~toi@d54C2A96D.access.telenet.be) |
| 13:07.46 | *** join/#oe dth (~dieter@p4FDEE594.dip.t-dialin.net) |
| 13:16.53 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 13:20.39 | *** join/#oe sudharsh__ (~sudharsh@59.92.88.244) |
| 13:25.26 | mickeyl | hmm ciabot is broken |
| 13:25.32 | mickeyl | upstream problem |
| 13:25.37 | *** join/#oe stefan__ (~stefan@p5B0352A9.dip.t-dialin.net) |
| 13:26.16 | mickeyl | is Steffen Sledz on IRC? |
| 13:30.59 | XorA | mickeyl: I think so, can remeber the nick off hand |
| 13:42.45 | *** join/#oe Hasse_ (~quassel@0x5552e721.adsl.cybercity.dk) |
| 13:45.22 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 14:00.54 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 14:17.31 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 14:18.33 | *** join/#oe ao2 (~ao2@2001:1418:117::1) |
| 14:29.32 | ao2 | hi, meta-toolchain can fail to build in some cases, here's a fix: http://people.openezx.org/ao2/tmp/0001-meta-toolchain-Run-rmdir-only-if-empty-dirs-are-actu.patch |
| 14:29.37 | ao2 | denix ^ |
| 14:29.52 | *** join/#oe marex (~marex@vasut.kolej.mff.cuni.cz) |
| 14:32.04 | Crofton|work | urg must pack |
| 14:35.17 | blindvt | ao2, rmdir --ignore-fail-on-non-empty |
| 14:37.00 | ao2 | blindvt, the "find" already filters empty dirs, the problem comes where there isn't any |
| 14:37.28 | blindvt | ao2, but -r0 should do as well -- and is even more gentle to rmdir impls, yea |
| 14:38.45 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 14:39.17 | ao2 | blindvt, what do you mean with "as well", how would you do the whole command? |
| 14:44.55 | eFfeM | GNUtoo: i have things booting on eeepc (with extlinux, guess previous time I just forgot a rootdelay) |
| 14:45.03 | eFfeM | but x is not starting properly |
| 14:45.17 | GNUtoo | eFfeM, maybe you should add xinit |
| 14:45.23 | eFfeM | it complains it cannlot load moudles glx, dri and dri2 |
| 14:45.34 | eFfeM | i already added xinit |
| 14:45.45 | GNUtoo | eFfeM, mine complain too and there are no problems |
| 14:46.15 | eFfeM | after that I get a message : Screen(s) found but none have a usable configuration |
| 14:46.25 | eFfeM | and the fatal sever error: no screens found |
| 14:46.41 | GNUtoo | eFfeM, Xorg.log? |
| 14:46.47 | eFfeM | ls |
| 14:47.15 | eFfeM | need to transfer it, one sec |
| 14:47.22 | GNUtoo | ok |
| 14:48.13 | eFfeM | actually probably could have scp-ed it |
| 14:49.45 | eFfeM | GNUtoo: http://www.pastebin.ca/1795320 |
| 14:51.03 | GNUtoo | eFfeM, seem that it's not my fault: |
| 14:51.15 | GNUtoo | (EE) intel(0): No kernel modesetting driver detected. |
| 14:51.31 | eFfeM | do I need to load a kernel module ? |
| 14:51.43 | GNUtoo | no |
| 14:51.48 | GNUtoo | maybe you need kms |
| 14:52.11 | GNUtoo | I suspect someone changed xorg compilations options for intel |
| 14:52.15 | GNUtoo | and required kms |
| 14:52.26 | eFfeM | kms? |
| 14:52.39 | GNUtoo | kernel mode setting |
| 14:52.59 | GNUtoo | let me find the command line |
| 14:54.59 | GNUtoo | else you could enable that: |
| 14:55.03 | GNUtoo | CONFIG_DRM_I915_KMS |
| 14:55.30 | eFfeM | ah ok |
| 14:56.00 | GNUtoo | in the kernel |
| 14:56.02 | GNUtoo | maybe do that |
| 14:56.20 | GNUtoo | while I look for the correct kernel command line argumetn |
| 14:56.49 | GNUtoo | i915.modeset=1 |
| 14:57.19 | eFfeM | will that work even if the kernel is not compiled with that config flag? |
| 14:57.41 | GNUtoo | http://en.gentoo-wiki.com/wiki/Kernel_Mode_Setting#Kernel_Mode_Setting has docs about kms |
| 14:57.44 | GNUtoo | yes |
| 14:57.46 | GNUtoo | it will work |
| 14:57.51 | GNUtoo | at least it should |
| 14:58.20 | GNUtoo | because the help of DRM_I915_KMS says: |
| 14:58.22 | GNUtoo | Choose this option if you want kernel modesetting enabled by default, |
| 14:58.41 | eFfeM | i'm trying |
| 15:00.02 | GNUtoo | ok |
| 15:05.15 | eFfeM | GNUtoo: with the arg I still get the modesetting error |
| 15:05.46 | GNUtoo | mmm |
| 15:05.49 | GNUtoo | strange |
| 15:06.08 | GNUtoo | so maybe recompile kenrel |
| 15:08.47 | eFfeM | yeah, in the boot log there is also a page table error and an error EIR stuck for drm:i915_handle_error |
| 15:09.04 | *** join/#oe playya (~playya@unaffiliated/playya) |
| 15:12.03 | eFfeM | foudn this patch for the error: http://lists.freedesktop.org/archives/intel-gfx/2010-February/005803.html |
| 15:13.19 | GNUtoo | ok |
| 15:13.23 | *** join/#oe Hasse_ (~quassel@0x5552e721.adsl.cybercity.dk) |
| 15:14.19 | *** join/#oe toi (~toi@d54C2A96D.access.telenet.be) |
| 15:20.08 | *** join/#oe sudharsh__ (~sudharsh@59.92.88.244) |
| 15:37.17 | *** join/#oe CSMan (~csman@unaffiliated/csman) |
| 15:42.59 | *** join/#oe toi (~toi@d54C2A96D.access.telenet.be) |
| 15:47.00 | *** join/#oe III (~orb@pool-96-226-214-14.dllstx.fios.verizon.net) |
| 16:07.34 | *** join/#oe mickeyl (~mickey@80.81.242.146) |
| 16:08.02 | *** join/#oe mickeyl (~mickey@openmoko/coreteam/mickey) |
| 16:11.08 | *** join/#oe toi (~toi@d54C2A96D.access.telenet.be) |
| 16:22.09 | *** join/#oe Aditya__1 (~Aditya@c-69-143-196-44.hsd1.md.comcast.net) |
| 16:22.14 | Aditya__1 | hello? |
| 16:22.35 | Aditya__1 | I was wondering if 2.6.32 is any better supported in OE now |
| 16:22.59 | *** join/#oe raster (~raster@enlightenment/developer/raster) |
| 16:38.31 | blindvt | khem, let's please drop the contrib/regression/objs-gcc.sh hunk from */100-uclibc-conf.patch. There is no good reason to have it in there IMO (i never used it in years, did you?) |
| 16:44.35 | blindvt | khem, it's a debug-leftover from erik (and would never ever trigger in oe anyway -- since $arch-oe-$rest != i686-pc-linux-uclibc) |
| 16:51.00 | *** join/#oe Sup3rkiddo (~sudharsh@unaffiliated/sudharsh) |
| 16:58.58 | *** join/#oe kristoffer (~kristoffe@79.138.193.118.bredband.tre.se) |
| 17:16.42 | eFfeM | GNUtoo: applied the patch and set the config flag to 1, the error now is gone, but still no screens found |
| 17:16.44 | eFfeM | same error |
| 17:16.56 | GNUtoo | :( |
| 17:17.02 | GNUtoo | mmm |
| 17:17.08 | GNUtoo | maybe follow that guide: |
| 17:17.31 | GNUtoo | http://en.gentoo-wiki.com/wiki/Kernel_Mode_Setting#Kernel_Mode_Setting |
| 17:17.37 | GNUtoo | they say things about uxa etc... |
| 17:17.52 | GNUtoo | also disable dri/drm/opengl etc....just to see |
| 17:18.06 | GNUtoo | I've the same messages on htcream and it works but we could try |
| 17:20.35 | eFfeM | will look at it |
| 17:23.29 | khem | blindvt: we do not use vendor on all distros |
| 17:23.49 | eFfeM | anyway there is the defconfig patch and the intelfb patch |
| 17:25.20 | *** join/#oe Sleep_Walker (~Sleep@193.179.96.131) |
| 17:29.53 | *** join/#oe Ainulindale (~ainu@calaquendi.org) |
| 17:36.40 | GNUtoo | mmm |
| 17:38.21 | eFfeM | you don't have a 915 module loaded, do you? |
| 17:38.29 | eFfeM | or any specific edits to xorg.conf ? |
| 17:38.43 | eFfeM | tried the things on the link you gave, but w/o success |
| 17:41.39 | eFfeM | GNUtoo: do you have a screen size in your xorg.conf ? |
| 17:42.32 | GNUtoo | I'll pastebin my xorg.conf |
| 17:42.39 | eFfeM | nice |
| 17:43.18 | *** join/#oe GNUtoo|oeee (~GNUtoo@host227-136-dynamic.17-79-r.retail.telecomitalia.it) |
| 17:43.38 | GNUtoo|oeee | http://pastebin.com/d773f8f34 |
| 17:43.56 | GNUtoo|oeee | note that I've an old Xorg |
| 17:44.34 | GNUtoo|oeee | http://pastebin.com/de542a86 |
| 17:46.02 | eFfeM | checking |
| 17:46.27 | B_Lizzard | Did TARGET_OS become mandatory? |
| 17:46.33 | B_Lizzard | in the distro files |
| 17:48.02 | *** join/#oe bbradley (~bbradley@87-194-119-230.bethere.co.uk) |
| 17:53.09 | eFfeM | GNUtoo: our xorg.conf is identical, the log files deviate at: oading sub module "vgahw" |
| 17:53.16 | eFfeM | I don't have that! |
| 17:53.27 | GNUtoo | ah ok strange |
| 17:53.31 | GNUtoo | I'll look at config |
| 17:53.38 | GNUtoo | s/config/xf86-video |
| 17:54.03 | GNUtoo | I've only xf86-video-intel |
| 17:54.06 | eFfeM | note that the file exists. /usr/lib/xorg/modules/libvgahw.so |
| 17:54.12 | GNUtoo | ok |
| 17:54.21 | GNUtoo | notmally it's in drivers |
| 17:54.44 | GNUtoo | look if you have intel something in: |
| 17:54.53 | GNUtoo | /usr/lib/xorg/modules/drivers |
| 17:55.11 | GNUtoo | intel_drv.so and intel_drv.a |
| 17:56.10 | eFfeM | in that dir i only have intel_drv.so |
| 17:56.21 | eFfeM | no .a but guess that is not too important |
| 17:56.43 | *** join/#oe Spyzer (~abhishek@210.212.53.135) |
| 17:56.57 | eFfeM | btw I do get the intel line with all those chipsets on it and the pci line after it |
| 17:58.37 | *** part/#oe III (~orb@pool-96-226-214-14.dllstx.fios.verizon.net) |
| 18:03.17 | eFfeM | GNUtoo do you have anything wrt video on your boot cmd line ? |
| 18:04.42 | GNUtoo|oeee | root=/dev/sda1 rw |
| 18:04.51 | GNUtoo|oeee | that's cat /prc/cmdline |
| 18:05.01 | Spyzer | hello GNUtoo, I wish to write power efficient qt-codes, is it really possible to use some techniques which can optimize the code to use lesser power?? |
| 18:05.30 | GNUtoo|oeee | Spyzer, you should look at powertop and see if it supports your platform |
| 18:06.23 | eFfeM | GNUtoo, that is almost the same I have, I have sdb1 i.s.o. sda1 and bootdelay=5 |
| 18:10.47 | GNUtoo | mmm |
| 18:15.23 | *** join/#oe jpieper (~jpieper@209-6-37-232.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 18:15.27 | Spyzer | I can't get any info of powertops supporting ARM, is there anything which can help me right power optimized code |
| 18:15.28 | *** join/#oe jolt_ (~jolt@p5B3DCF2B.dip.t-dialin.net) |
| 18:17.17 | GNUtoo | I don't know |
| 18:17.29 | GNUtoo | maybe try it |
| 18:17.40 | GNUtoo | be shure to have the corect things compiled into your kernel |
| 18:17.51 | GNUtoo | and also to have the last powertop version |
| 18:23.52 | *** join/#oe Vnik (~a@59.90.65.93) |
| 18:39.19 | *** join/#oe xjqian (~gordon@96-35-203-116.dhcp.stls.mo.charter.com) |
| 18:39.41 | GNUtoo|oeee | i'll be back later |
| 18:41.58 | eFfeM | GNUtoo, cya |
| 18:42.09 | eFfeM | (still struggling with x :P) |
| 19:09.47 | *** join/#oe marex (~marex@vasut.kolej.mff.cuni.cz) |
| 19:10.58 | GNUtoo | I'm back |
| 19:26.08 | GNUtoo|oeee | eFfeM, can I see recent logs? |
| 19:26.57 | *** join/#oe dos1 (~dos@unaffiliated/dos1) |
| 19:33.04 | eFfeM | GNUtoo yes, one sec |
| 19:37.53 | eFfeM | uploading to pastebin, it is slow |
| 19:38.04 | eFfeM | GNUtoo have you used any specific grub options |
| 19:38.25 | GNUtoo | eFfeM, no |
| 19:38.34 | eFfeM | moved to pastie: http://www.pastie.org/823577 |
| 19:38.39 | GNUtoo | I pasted cat /proc/cmdline |
| 19:38.50 | GNUtoo | *the change was xorg version* I think |
| 19:38.58 | eFfeM | this is dmesg output, xorg.conf and Xorg.log |
| 19:39.23 | eFfeM | copied from eeepc to my opensuse desktop system, then pasted as I don't have web functionality on the eeepc |
| 19:39.25 | GNUtoo | still (EE) intel(0): No kernel modesetting driver detected. |
| 19:39.29 | eFfeM | yeah saw the cmd line |
| 19:39.31 | eFfeM | yes |
| 19:40.25 | eFfeM | seems related to kms, but I do have i915.modeset=1 and I have it as default too |
| 19:40.32 | GNUtoo | maybe we should look in xorg channels |
| 19:40.49 | GNUtoo | I'll read better your logs |
| 19:41.16 | eFfeM | i asked in intel-gfx channel but didn't get an answer |
| 19:42.18 | GNUtoo | Warning: Make sure you disable framebuffer drivers in Device Drivers ---> Graphics support ---> Support for frame buffer devices, like intelfb, vesafb or uvesafb. KMS won't work with them and you'll end up with a black console screen or possibly other graphical artifacts. |
| 19:42.35 | GNUtoo | I used framebuffer in kernel config |
| 19:43.23 | eFfeM | a diff is that I am using intel 2.10.0 driver and you 2.9.1 saw some msges about it in google |
| 19:43.45 | eFfeM | i used the defconfig that is in eee701 dir |
| 19:44.00 | GNUtoo | disable framebuffer |
| 19:44.06 | eFfeM | and i don't even get the black screen |
| 19:44.32 | GNUtoo | maybe I should try on sdcard |
| 19:45.10 | GNUtoo | because the main problem is that I use(like in "production") angstrom on eeepc701 |
| 19:45.14 | GNUtoo | it's not a test system |
| 19:45.18 | GNUtoo | it's my main os on it |
| 19:46.42 | eFfeM | from the intel driver page: |
| 19:46.43 | eFfeM | xf86-video-intel 2.10.0: |
| 19:46.43 | eFfeM | <PROTECTED> |
| 19:47.12 | GNUtoo | we use .32 |
| 19:47.24 | GNUtoo | maybe I should try without fb |
| 19:47.28 | GNUtoo | on a sdcard |
| 19:47.32 | eFfeM | yes, but the diff is that you use 2.9.1 and I use 2.10.0 |
| 19:47.42 | eFfeM | would be nice |
| 19:50.15 | *** part/#oe XorA (~XorA@www.xora.org.uk) |
| 19:50.22 | eFfeM | meanwhile i'll try to move back to 2.9.1 |
| 19:51.57 | GNUtoo | ok |
| 19:54.13 | *** join/#oe palisv (~palisv@c-8cfde055.38-1-64736c10.cust.bredbandsbolaget.se) |
| 19:55.05 | eFfeM | GNUtoo, made progress, used 2.9.1, now it starts with a black screen |
| 19:55.11 | GNUtoo | ok |
| 19:55.15 | GNUtoo | so remove kms |
| 19:55.23 | eFfeM | will do |
| 20:00.25 | *** join/#oe Hasse_ (~quassel@0x5552e721.adsl.cybercity.dk) |
| 20:02.37 | eFfeM | GNUtoo, progress: with 2.9.1 and without kms I can start X adn get an error window: unable to contact settings server, failed to execute dbus-launch to autolaunch D-BUs session |
| 20:02.52 | eFfeM | never thought I would consider an error message as progress ;-) |
| 20:03.31 | GNUtoo | lol |
| 20:03.34 | eFfeM | don't have dbus-launch binary i think |
| 20:03.35 | GNUtoo | mmm |
| 20:03.39 | GNUtoo | ok |
| 20:03.44 | eFfeM | find in /usr does not give it |
| 20:03.46 | GNUtoo | I'll bitbake an image after reconfiguring kenrel |
| 20:03.54 | eFfeM | cool |
| 20:07.45 | eFfeM | GNUtoo, i'm in business, installed dbus-x11 which gave me dbus-launch then it worked! |
| 20:07.55 | GNUtoo | ok nice |
| 20:08.20 | GNUtoo | btw I'm sorry for the incomplete support |
| 20:09.42 | eFfeM | np, this is a risk living on the bleeding edge |
| 20:09.51 | GNUtoo | lol ok |
| 20:10.17 | GNUtoo | living on the bleeding edge also has advantages.... |
| 20:10.19 | eFfeM | so for now I suggest adding xinit and dbus-x11 to xfce4-image and make 2.9.1 the preferred intel driver version |
| 20:10.46 | GNUtoo | for instance I've angstrom on my bug device and it runs mpd and I can control it from my desktop or my phone |
| 20:10.54 | GNUtoo | ok |
| 20:11.12 | eFfeM | btw for me on eeepc midori works (at least it starts up with google) |
| 20:11.20 | GNUtoo | eFfeM, as you found it and you know the bug better then me maybe you should do the commit |
| 20:11.52 | GNUtoo | I'll try to fix kms with recent intel driver on my side |
| 20:12.17 | eFfeM | good, i'll revert the defconfig change |
| 20:12.27 | GNUtoo | eFfeM, which change? |
| 20:12.36 | GNUtoo | no I think the change is needed |
| 20:12.41 | GNUtoo | but not sufficent |
| 20:12.48 | eFfeM | ah ok |
| 20:13.13 | eFfeM | anyway, the issues now are known |
| 20:13.33 | GNUtoo | ok |
| 20:17.34 | *** join/#oe xjqian (~gordon@mir-nil-pat-118-150.wustl.edu) |
| 20:20.37 | eFfeM | can i also leave it to you to add dbus-x11 and xinit to the image ? |
| 20:26.09 | GNUtoo | I would prefer that you do it |
| 20:26.14 | GNUtoo | I do the kms part |
| 20:26.49 | GNUtoo | because I would also need to test the changes etc...which would be problematic |
| 20:26.57 | GNUtoo | I've already kms to test |
| 20:31.54 | eFfeM | GNUtoo, ok |
| 20:32.11 | eFfeM | btw noticed that in xfce xterm fbset says 640x480-60 |
| 20:32.18 | GNUtoo | yes I know |
| 20:32.23 | eFfeM | 800x480 is for compu an odd size |
| 20:32.25 | GNUtoo | that's because we don't use uvesafb |
| 20:32.40 | GNUtoo | but maybe it'll go away with kms |
| 20:32.53 | GNUtoo | ah xterm |
| 20:33.01 | GNUtoo | I thought real tty |
| 20:33.14 | GNUtoo | it's 800x480 else wesnoth wouldn't work |
| 20:33.29 | GNUtoo | xrandr -q confirms it |
| 20:33.54 | eFfeM | no xrandr in the default img |
| 20:34.58 | eFfeM | installed it, indeed it gives 800x480 |
| 20:35.21 | eFfeM | btw the font in terminal is baaad, a proportional font used in a nonproportional way |
| 20:35.46 | eFfeM | ls |
| 20:43.56 | GNUtoo | you can change that in: |
| 20:44.05 | GNUtoo | settings-> |
| 20:44.17 | GNUtoo | apperance-> |
| 20:44.22 | GNUtoo | fonts-> |
| 20:44.27 | GNUtoo | or in the terminal itself |
| 20:44.39 | GNUtoo | edit->preferences-> |
| 20:44.46 | *** join/#oe timtimred (~meh@79-77-246-37.dynamic.dsl.as9105.com) |
| 20:44.49 | GNUtoo | apperance |
| 20:45.14 | GNUtoo | I use liberation mono |
| 21:01.38 | *** join/#oe florian (~fuchs@Maemo/community/contributor/florian) |
| 21:03.27 | florian | hi all |
| 21:06.51 | *** join/#oe tw3k (~tw3k@unaffiliated/tw3k) |
| 21:07.08 | *** part/#oe tw3k (~tw3k@unaffiliated/tw3k) |
| 21:12.16 | eFfeM | GNUtoo, ok |
| 21:12.20 | eFfeM | florian: hi |
| 21:13.16 | eFfeM | DJWillis: I noticed you made the xfce46-image recipe, there are two issues with this recipe, it is missing xinit and dbus-x11; for me it only worked after I added those, can you fix or provide guidance where to add those |
| 21:15.45 | *** join/#oe Martin_B (~martin@pool-225-65-198-89.dbd-ipconnect.net) |
| 21:16.09 | *** join/#oe XorA (~XorA@www.xora.org.uk) |
| 21:17.13 | Martin_B | http://psppimpz.comze.com/wordpress/?p=733 |
| 21:17.14 | GNUtoo | hi DJWillis |
| 21:17.19 | GNUtoo | did you fix scummvm? |
| 21:18.52 | *** join/#oe woglinde (~woglinde@109.250.221.50) |
| 21:18.54 | woglinde | re |
| 21:21.19 | DJWillis | eFfeM: I'll look into it, it was ment as a basic starter for Xfce 4.6 not a complete rich image, i'll take a look when I get a chance, I only ever tested with Xorg by the way, I never considered people might try it with older/more exotic X servers. |
| 21:21.54 | DJWillis | GNUtoo: it's a pretty simple fix but I have not checked it in yet as I have been upto my neck in the job that keeps food on the table ;-) |
| 21:22.04 | GNUtoo | ok |
| 21:23.17 | woglinde | hi djwillis |
| 21:23.37 | DJWillis | Hey woglinde |
| 21:23.50 | GNUtoo | DJWillis, you work for the open pandora? I heard that there were problems with cases |
| 21:23.54 | GNUtoo | hi woglinde |
| 21:26.17 | DJWillis | GNUtoo: I understand the final cases are signed off and being/about to be produced. I don't 'work' for OP, the OE and firmware work I have been doing on it is for unpaid fun (yeh right, it stopped being fun a while back) ;-). My real job has nothing much to do with cool embedded stuff. Far short of some issues with shrinkage in the plastic that have been sorted the cased Pandora's I have are pretty cool. |
| 21:26.55 | GNUtoo | ok |
| 21:26.55 | eFfeM | DJWillis: GNUtoo and i use xorg, xinit and dbus-x11 are pretty basic to get things running, would fix it myself but not really sure what the best place is to add it. |
| 21:26.56 | GNUtoo | thanks |
| 21:29.44 | DJWillis | eFfeM: ahh, I just had a comment the other day (it may not have been from you) about it not working well with KDrive or XVesa. xinit and dbus-x11 are pretty basic ;-), i'll get them in, I have a load of Xfce tweaks in my tree, Koen seems to inport my stuff into OE but I don't tend to have a lot of say in what he picks up. |
| 21:32.33 | eFfeM | DJWillis: i mentioned xvesa in the channel, but gnutoo moved me to xorg |
| 21:33.35 | GNUtoo | yes xorg is better,specialy because I wonder if it would have suported everything(the resolution,the synaptics driver etc...) |
| 21:36.34 | eFfeM | GNUtoo found someone with knowledge on #intel-gfx |
| 21:36.48 | GNUtoo | ok |
| 21:36.49 | GNUtoo | I come |
| 21:36.53 | eFfeM | we need to disable all fb things they conflict with kms |
| 21:38.14 | DJWillis | eFfeM: Ahh, nice to see someone trying to work with Xfce 4.6, I figured I was the only one working with it ;-) |
| 21:39.02 | GNUtoo | eFfeM, look up |
| 21:39.04 | GNUtoo | <GNUtoo> Warning: Make sure you disable framebuffer drivers in Device Drivers ---> Graphics support ---> Support for frame buffer devices, like intelfb, vesafb or uvesafb. KMS won't work with them and you'll end up with a black console screen or possibly other graphical artifacts. |
| 21:40.14 | GNUtoo | my build machine is slow and is still compling kernel |
| 21:44.07 | eFfeM | GNUtoo read that, but I was not even getting the black screen |
| 21:44.19 | eFfeM | so thought my problem was different |
| 21:44.24 | GNUtoo | ok |
| 21:44.26 | GNUtoo | sorry then |
| 21:44.31 | eFfeM | np |
| 21:50.00 | eFfeM | GNUtoo did you play with the camera? is it uvc? |
| 21:50.10 | eFfeM | probably we should try to trim defconfig a little bit |
| 21:50.15 | GNUtoo | yes uvc and it works |
| 21:50.21 | eFfeM | cool |
| 21:50.24 | GNUtoo | ok |
| 21:50.52 | eFfeM | saw it was also probing for floppy. that is not really useful either |
| 21:51.00 | GNUtoo | yes |
| 21:51.07 | GNUtoo | and we should remove legacy tty |
| 21:52.43 | GNUtoo | hrw told me that it was useless and made it boot slower |
| 21:55.40 | mwester | always wanted a floppy drive on his embedded device. :p |
| 21:55.58 | GNUtoo | lol |
| 21:56.27 | GNUtoo | http://www.youtube.com/watch?v=udlxr8t1nZM&feature=youtube_gdata has one |
| 21:59.02 | mwester | And cassettes too! |
| 21:59.14 | GNUtoo | yes |
| 21:59.56 | eFfeM | actually would love to have it booting in 5 seconds :-) like From Naught to Sixty in 5 Seconds - Arjan van de Ven & Auke Kok |
| 22:00.17 | eFfeM | mwester: then hurry, buy a usb floppy drive while they last :-) |
| 22:00.35 | GNUtoo | I've some usb->floppy drives |
| 22:00.51 | mwester | I have one. I used it. I think I did, anyway... |
| 22:03.25 | eFfeM | actually last year I discarded almost all of my floopies |
| 22:03.36 | eFfeM | stiil have the ones with minix 1.5 for atari st though :-) |
| 22:08.39 | *** join/#oe mickey|bbl (~mickey@80.81.242.146) |
| 22:10.06 | woglinde | he mickeyl |
| 22:13.37 | *** join/#oe EiNSTeiN_ (~einstein@unaffiliated/einstein/x-615171) |
| 22:32.34 | *** join/#oe ant__ (~andrea@host129-75-dynamic.5-87-r.retail.telecomitalia.it) |
| 22:43.54 | eFfeM | calling it a day, cya all tomorrow! |
| 23:20.02 | *** join/#oe marcosmamorim (~marcos@200-158-243-152.dsl.telesp.net.br) |
| 23:52.04 | *** join/#oe BillK (~BillK@203-166-227-169.dyn.iinet.net.au) |