| 00:30.15 | *** join/#oe ant_home (n=andrea@host136-105-dynamic.50-82-r.retail.telecomitalia.it) |
| 00:45.52 | *** join/#oe guillaum1 (n=gl@AMontsouris-153-1-89-247.w90-2.abo.wanadoo.fr) |
| 01:08.08 | *** join/#oe BenLauDC (n=benlau@221.125.8.105) |
| 01:22.40 | *** join/#oe wicknix (n=wicked@32.141.154.69) |
| 01:59.07 | *** join/#oe reachfh (n=reachfh@221.169.210.231) |
| 02:00.49 | *** join/#oe kergoth (n=kergoth@ip68-3-163-239.ph.ph.cox.net) |
| 02:16.08 | kergoth | ⥠devshell |
| 02:35.09 | CIA-2 | 03Mike Westerhof <mwester@dls.net> 07org.openembedded.dev * ra64be907e3 10openembedded.git/ (5 files in 3 dirs): SlugOS: reinstate fakeroot 1.9.6 and set as the PREFERRED_VERSION |
| 02:37.50 | *** join/#oe khem` (n=khem@adsl-71-146-30-62.dsl.pltn13.sbcglobal.net) |
| 02:49.34 | *** join/#oe GunsNRose (n=GunsNRos@222.212.51.165) |
| 03:08.59 | kergoth | why does opkg need gpgme? |
| 03:11.19 | kergoth | ah, i see |
| 03:17.40 | mwester | yes. exactly. :( |
| 03:18.47 | kergoth | i can see it being useful, but it should definately be something for which there's a variable in OpenEmbedded to toggle the behavior, imo |
| 03:18.55 | kergoth | it pulls a lot of extra deps into the so called minimal-image |
| 03:19.12 | mwester | opkg-nogpg addresses that. |
| 03:19.20 | mwester | s/dd/d/ |
| 03:19.32 | kergoth | ahh, didn't see that |
| 03:19.33 | kergoth | cool |
| 03:21.04 | mwester | It also pulls in libcurl, which pulls in a lot of crypto stuff isn't needed for minimal things either, but nobody was interested in trimming that out. So I had a go at it so it would run on the 32MB hardwares, and created the horrible hack called opkg-nogpg-nocurl. |
| 03:22.42 | *** join/#oe GunsNRose_ (n=GunsNRos@222.212.51.165) |
| 03:32.05 | *** join/#oe hvontres|home (n=hvontres@adsl-75-8-123-171.dsl.sndg02.sbcglobal.net) |
| 03:33.36 | CIA-2 | 03Khem Raj <raj.khem@gmail.com> 07org.openembedded.dev * r2c15084856 10openembedded.git/conf/checksums.ini: checksums.ini: Add checksums for fakeroot_1.12.1.tar.gz and netbase-4.21.tar.gz |
| 03:37.13 | *** join/#oe johncylee (n=john@59-124-115-148.HINET-IP.hinet.net) |
| 03:44.06 | Crofton | khem, thanks for cleaning up the checksums! |
| 03:50.53 | *** join/#oe rsalveti (n=salveti@200.222.2.234) |
| 03:53.33 | khem` | Crofton, fixed whatever came in way of building console-image |
| 04:19.14 | *** join/#oe Soopaman (n=Soopaman@67.204.62.39) |
| 04:23.01 | *** join/#oe HellDragon (n=jd@Wikipedia/HellDragon) |
| 04:27.58 | *** join/#oe GunsNRose__ (n=GunsNRos@222.212.51.165) |
| 05:16.29 | *** join/#oe bergelin (n=bergelin@c80-216-149-138.bredband.comhem.se) |
| 05:20.52 | *** join/#oe hufnus_cicq (n=hufnus_c@69-12-177-67.dsl.static.sonic.net) |
| 05:43.39 | *** join/#oe flameman (n=toor@net-93-65-1-167.cust.dsl.vodafone.it) |
| 06:00.04 | *** join/#oe Sup3rkiddo (n=sudharsh@unaffiliated/sudharsh) |
| 06:11.33 | *** join/#oe marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 06:24.20 | *** join/#oe GunsNRose (n=GunsNRos@222.212.51.165) |
| 06:49.10 | *** join/#oe rschuster (n=rob@e178095221.adsl.alicedsl.de) |
| 06:51.04 | *** join/#oe mrc3__ (n=ddiaz@189.157.115.100) |
| 06:55.14 | *** join/#oe pleemans (n=toi@116.54-246-81.adsl-static.isp.belgacom.be) |
| 07:04.28 | *** join/#oe ScriptRipper (n=martin@host-82-135-36-197.customer.m-online.net) |
| 07:41.05 | *** join/#oe mithro (n=tim@unaffiliated/mithro) |
| 07:41.44 | *** join/#oe rschuster (n=rob@e178095221.adsl.alicedsl.de) |
| 07:59.14 | *** join/#oe AvengerMoJo (n=AvengerM@61.14.130.209) |
| 07:59.42 | *** join/#oe DJW|Home (i=djwillis@82-46-19-72.cable.ubr02.bath.blueyonder.co.uk) |
| 08:02.15 | *** join/#oe claudiu_vr (n=claudiu@host127-248-dynamic.0-79-r.retail.telecomitalia.it) |
| 08:02.32 | *** part/#oe claudiu_vr (n=claudiu@host127-248-dynamic.0-79-r.retail.telecomitalia.it) |
| 08:06.31 | *** join/#oe rschuster (n=rob@e178095221.adsl.alicedsl.de) |
| 08:13.44 | *** join/#oe Pr0t0N (n=lcintrat@wyplay-fr-4-82.cnt.nerim.net) |
| 08:20.30 | *** join/#oe agateau (n=agateau@78.115.222.104) |
| 08:22.03 | mckoan | good morning |
| 08:24.07 | *** join/#oe BET_frogger (n=frogger@blackshift.broker.freenet6.net) |
| 08:24.52 | *** join/#oe boris_OmegA (n=boris@194.51.141.172) |
| 08:49.17 | *** join/#oe pvanhoof (n=pvanhoof@d54C0C0BA.access.telenet.be) |
| 08:54.05 | *** join/#oe Xilent (n=xk@unaffiliated/xilent) |
| 08:59.02 | *** join/#oe cyberdeck (n=mnemonic@iss66.vlsi.informatik.tu-darmstadt.de) |
| 09:07.26 | *** join/#oe noglitch (n=Miranda@mail.atmel.fr) |
| 09:16.53 | *** join/#oe Noctambulist (n=Sleep@193.179.96.131) |
| 09:27.25 | *** join/#oe Omegamoon (n=egoe@80.126.228.122) |
| 09:41.20 | *** join/#oe florian_kc (n=fuchs@217.146.132.69) |
| 09:49.42 | florian | good morning |
| 09:55.21 | *** join/#oe pocek (i=pock@87-205-79-201.adsl.inetia.pl) |
| 10:03.46 | pb_ | hi florian |
| 10:08.23 | *** join/#oe lrg_ (n=lrg@79-68-100-144.dynamic.dsl.as9105.com) |
| 10:15.28 | *** join/#oe Gnutoo (n=gnutoo@host76-59-dynamic.24-79-r.retail.telecomitalia.it) |
| 10:22.01 | *** join/#oe Omegamoon (n=egoe@demolitionman.xs4all.nl) |
| 10:23.50 | mpoullet | hi, in the linux-omap-pm kernel, does the message "SR1: VDD autocomp is not active" means that smartreflex is deactivated? |
| 10:27.52 | *** join/#oe mithro (n=tim@unaffiliated/mithro) |
| 10:32.55 | *** join/#oe rob_w (n=bill@87.234.28.68) |
| 10:42.38 | *** join/#oe ChanServ (ChanServ@services.) |
| 10:42.38 | *** mode/#oe [+o ChanServ] by irc.freenode.net |
| 10:42.59 | *** part/#oe rschuster (n=rob@e178095221.adsl.alicedsl.de) |
| 10:44.38 | *** join/#oe Gnutoo (n=gnutoo@host76-59-dynamic.24-79-r.retail.telecomitalia.it) |
| 10:46.17 | *** join/#oe Xilent (n=xk@unaffiliated/xilent) |
| 10:52.40 | *** join/#oe booxter (n=booxter@cpmsq.epam.com) |
| 10:53.23 | *** join/#oe rschuster (n=rob@e178095221.adsl.alicedsl.de) |
| 11:00.20 | hrw|gone | http://www.linuxdevices.com/news/NS2276515578.html |
| 11:00.26 | hrw | morning |
| 11:02.31 | florian | hi hrw |
| 11:03.09 | *** join/#oe Sleep_Walker (n=Sleep@nat/suse/x-ca823326bcee790d) |
| 11:03.51 | florian | hrw: That's much better: http://www.linuxdevices.com/news/NS8394566429.html ;) |
| 11:05.37 | mckoan | cool news ! :-D |
| 11:06.06 | *** join/#oe Gnutoo (n=gnutoo@host253-134-dynamic.50-79-r.retail.telecomitalia.it) |
| 11:07.16 | hrw | that one I already read |
| 11:07.16 | hrw | florian: will GPE project mail LD to change handhelds.org entry? |
| 11:07.37 | hrw | florian: Question 6 and 7 have entry "Handhelds.org (Familiar, GPE, Opie, Intimate, etc.)" which is wrong - GPE project moved from Handhelds.org to Linuxtogo.org hosting nearly two years ago.... |
| 11:08.08 | florian | hrw: oh, I didn't notice this yet |
| 11:08.24 | florian | hrw: everyoen should complain! |
| 11:10.02 | hrw | "BTW - Familiar distribution which is part of handhelds.org died two years ago..." |
| 11:10.08 | hrw | thats end of my mail to ld |
| 11:10.33 | hrw | Intimate was pre-familiar thing? |
| 11:11.59 | hrw | "The problem with handhelds.org is that most of their project are no longer developed. Intimate (which you list) was deprecated by Familiar which ended own life two years ago." |
| 11:12.43 | florian | hrw: yes right... Intimate is really ancient |
| 11:14.14 | *** part/#oe rschuster (n=rob@e178095221.adsl.alicedsl.de) |
| 11:15.00 | hrw | mail sent |
| 11:15.25 | florian | hrw: cool, many thanks! |
| 11:18.27 | *** join/#oe pirho (i=pirho@gateway/gpg-tor/key-0x2CEEC9CB) |
| 11:20.50 | Crofton|work | we need more peopl eto clcik the OE box |
| 11:25.11 | methril|work | morning |
| 11:25.21 | *** join/#oe thorsten1 (n=the_mann@sav034.fh-bochum.de) |
| 11:26.12 | Crofton|work | good work, we are up to 8% |
| 11:26.26 | hrw | Crofton|work: we can not mention this on ML |
| 11:26.36 | hrw | otherwise it will be like 2-3 years ago |
| 11:26.59 | hrw | LD wrote something like 'high position of openembedded is due to aggressive promotion of survey on their ML' |
| 11:28.12 | Crofton | hrw, you are correct |
| 11:28.32 | Crofton | but, all of these surveys have the same issue |
| 11:28.43 | Crofton | I would assume the debian guys do some promotion |
| 11:28.50 | Crofton | the .com crowd not so much |
| 11:29.21 | broonie | Promotion? Debian? Errr... |
| 11:29.29 | Crofton | I would view the skewing of the results as a measure of community involvement :) |
| 11:31.10 | *** join/#oe Sup3rkiddo (n=sudharsh@unaffiliated/sudharsh) |
| 11:41.13 | florian | 8.4% |
| 11:46.22 | *** join/#oe Sleep-Walker (n=Sleep@nat/suse/x-bab1a1d6098ee354) |
| 11:46.49 | *** join/#oe alecrim (n=alecrim@189.2.128.130) |
| 11:58.14 | *** join/#oe Sleep-Walker (n=Sleep@nat/suse/x-55e1c72e1f2b447f) |
| 12:02.19 | CIA-2 | 03Khem Raj <raj.khem@gmail.com> 07mickey/org.openembedded.dev * ra53bdf1edf 10openembedded.git/conf/checksums.ini: |
| 12:02.19 | CIA-2 | checksums: Remove spurious control characters in ++DFB-0.9.25.tar.gz url |
| 12:02.19 | CIA-2 | * This led to 'NOTE: Creating the CheckSum parser failed' but the build |
| 12:02.20 | CIA-2 | continues without checking for the checksums. Ideally it should have |
| 12:02.20 | CIA-2 | errored if OE_STRICT_CHECKSUMS was set. But I will leave that for |
| 12:02.21 | CIA-2 | other day. |
| 12:02.25 | CIA-2 | 03Khem Raj <raj.khem@gmail.com> 07mickey/org.openembedded.dev * rd9bd245d15 10openembedded.git/conf/distro/include/preferred-om-2008-versions.inc: preferred-om-2008-versions.inc: Use pidgin version 2.5.3 |
| 12:02.28 | CIA-2 | 03Dmitry 'MAD' Artamonow <mad_soft@inbox.ru> 07mickey/org.openembedded.dev * rfa76888ead 10openembedded.git/ (5 files in 3 dirs): |
| 12:02.31 | CIA-2 | xdiskusage: xdiskusage shows disk space usage information, it can produce a PostScript version of the display. |
| 12:02.33 | CIA-2 | Signed-off-by: Khem Raj <raj.khem@gmail.com> |
| 12:02.35 | CIA-2 | 03Michael 'Mickey' Lauer <mickey@vanille-media.de> 07mickey/org.openembedded.dev * r40da08b6db 10openembedded.git/ (3 files in 3 dirs): frameworkd-devel: use mickey/ogsmd-new-timeout branch for now |
| 12:11.39 | CIA-2 | 03Jeremy Lainé <jeremy.laine@m4x.org> 07org.openembedded.dev * r9db305be9d 10openembedded.git/packages/linux/ (4 files in 2 dirs): linux-2.6.27: improve boc01 EEPROM support |
| 12:21.17 | *** join/#oe rschuster (n=rob@e178095221.adsl.alicedsl.de) |
| 12:23.42 | booxter | how to get with bitbake shell a variable value used when parsing specific package (task)? |
| 12:24.09 | booxter | i'd like to know what $DISTRO_INIT_MANAGER is when building task-boot |
| 12:30.21 | booxter | and how to redirect bitbake shell output to a file? I'd like to get 'environment' output into file |
| 12:32.59 | *** join/#oe jeremy_laine (n=chatzill@mna75-4-81-56-56-40.fbx.proxad.net) |
| 12:35.00 | *** join/#oe Caelian (n=Caelian@p5481FE22.dip.t-dialin.net) |
| 12:37.01 | *** join/#oe XorA (n=XorA@94-193-93-235.zone7.bethere.co.uk) |
| 12:39.02 | Caelian | Could it be somebody forgot to update the openembedded/conf/checksum.ini when they updated base-passwd to 3.5.20 ... trying to build SlugOS firmware now generates the following error: ERROR: base-passwd-3.5.20: ftp://ftp.debian.org/debian/pool/main/b/base-passwd/base-passwd_3.5.20.tar.gz has no entry in conf/checksums.ini, not checking URI |
| 12:40.01 | Crofton|work | Caelian, most likely |
| 12:40.07 | Crofton|work | let me take a look |
| 12:42.27 | hrw | booxter: bitbake task-boot -e|grep ^DISTRO_INIT_MANAGER |
| 12:48.08 | jeremy_laine | hello all! |
| 12:48.42 | Crofton|work | yep |
| 12:48.46 | jeremy_laine | I was wondering, is anyone still using qtopia-core 4.3.3 (as opposed to qt-embedded 4.4.3)? |
| 12:48.59 | Crofton|work | Would people stop commiting new recipes without checksums! |
| 12:49.09 | Caelian | heheh |
| 12:49.15 | Crofton|work | I know it happens sometimes |
| 12:49.29 | Crofton|work | Let me fix it |
| 12:49.48 | Caelian | Glad to have brought it to your attention :) |
| 12:51.42 | booxter | Crofton, no reviews - no way to fix the problem |
| 12:51.58 | booxter | automate it or die :) |
| 12:57.13 | CIA-2 | 03Philip Balister <philip@balister.org> 07org.openembedded.dev * r4fe53e316d 10openembedded.git/conf/checksums.ini: checksums.ini : Add checksum for base-passwd-3.5.20. |
| 12:57.15 | Crofton|work | Caelian, pushed, sorry for the trouble |
| 12:57.47 | Caelian | no trouble at all ... i know stuff like this happens :) |
| 12:59.38 | Caelian | was just about to do a fresh firmware image / package build-run to put my automated flashing/software-installation script through another test run when i noticed the build breakage |
| 13:02.47 | *** join/#oe Xilent (n=xk@unaffiliated/xilent) |
| 13:03.33 | *** join/#oe eFfeM (n=frans@195-241-226-180.ip.telfort.nl) |
| 13:03.52 | mpoullet | hi, is there a way to tell the fetcher not to try the mirror, especially when I try to fetch a local svn server? |
| 13:18.51 | *** join/#oe bergelin (n=bergelin@c80-216-149-138.bredband.comhem.se) |
| 13:19.23 | *** join/#oe garren|work (n=chatzill@mail.dm.co.za) |
| 13:27.26 | *** join/#oe aloisiojr (n=aloisio@200.184.118.130) |
| 13:29.06 | *** join/#oe dijenerate (n=dijenera@65.48.155.36) |
| 13:29.16 | Caelian | Crofton|work: spotted another one ... ERROR: tzcode-native-2007k: http://bent.latency.net/bent/darcs/zoneinfo-2007k/src/tzcode2007k.tar.gz has no entry in conf/checksums.ini, not checking URI |
| 13:29.54 | Caelian | though i am wondering if that one should not be updated to something a bit more recent :) |
| 13:30.03 | Crofton|work | frak |
| 13:30.09 | Crofton|work | let me check |
| 13:35.22 | Caelian | its origin is openembedded/packages/tzcode/tzcode-native_2007k.bb (in case you need it) |
| 13:35.40 | Crofton|work | yeah, I think this is a mirror issue .... |
| 13:37.12 | hrw | ~curse lack of syncing tools |
| 13:37.13 | ibot | May the fleas of a thousand camels infest your most sensitive regions, lack of syncing tools ! |
| 13:39.13 | *** join/#oe tchnk2|afk (n=hwtechni@80.78.249.211) |
| 13:41.07 | Crofton|work | SRC_URI = "\ |
| 13:41.07 | Crofton|work | <PROTECTED> |
| 13:41.07 | Crofton|work | <PROTECTED> |
| 13:41.07 | Crofton|work | " |
| 13:41.09 | Crofton|work | ? |
| 13:41.12 | Crofton|work | why twice? |
| 13:41.25 | hrw | tzcode/tzdata |
| 13:42.12 | Crofton|work | doh |
| 13:42.17 | Crofton|work | thanks :) |
| 13:42.27 | Crofton|work | is an idiot |
| 13:42.37 | Caelian | ;) |
| 13:43.15 | hrw | ;D |
| 13:43.29 | hrw | Crofton|work: you probably forgot contact lenses |
| 13:43.53 | Crofton|work | yeah |
| 13:44.11 | Crofton|work | I have my glasses on atm, and the screen is a bit blurrry |
| 13:44.33 | florian | Crofton|work: cleaning screen and glasses helps a lot ;) |
| 13:46.02 | florian | bbl |
| 13:47.01 | *** join/#oe birunko (n=birunko@200.184.118.130) |
| 13:47.19 | hrw | is doing firmware update on nokia phone.. |
| 13:50.04 | Crofton|work | I just found another way to defeat checksums |
| 13:50.10 | Crofton|work | remove checksums.ini |
| 13:52.16 | pb_ | genius! |
| 13:52.45 | hrw | Crofton|work: cd build; touch conf/checksums.ini |
| 13:52.51 | hrw | thats even better |
| 13:53.26 | Crofton|work | heh |
| 13:53.36 | Crofton|work | I am not encouraging this behavior |
| 13:53.43 | hrw | bitbake use first found in BBPATH |
| 13:53.54 | Caelian | kinda defeats the original purpose ... but it would remove the headache :) |
| 13:54.50 | hrw | heh.. win32 is funny... nokia software updater do flashing new firmware to my phone. this require installing few drivers (which is done automatically by nsu). during flashing windows asks for reboot due to new drivers installed |
| 13:56.15 | CIA-2 | 03Philip Balister <philip@balister.org> 07org.openembedded.dev * r834db40851 10openembedded.git/conf/checksums.ini: tzcode-native : Add checksums for txcode and tzdata. |
| 13:58.19 | *** join/#oe timtimred (n=meh@92-237-114-21.cable.ubr03.chms.blueyonder.co.uk) |
| 13:58.50 | *** join/#oe cremoris (n=jonny@Dawson-206-048.qmul.ac.uk) |
| 14:00.57 | Caelian | ok ... works now ... (able to successfully build openntpd again) |
| 14:01.47 | Crofton|work | thanks for being patient and not disabling checksums |
| 14:02.21 | Caelian | hehe ... the more i can use a stock build system .. the less maintenance hassle falls upon me :) |
| 14:03.35 | Caelian | there's a reason i opted fro writing scripted SSH-sessions do to additional software installation/removal ... instead of trying to somehow modify the actual firmware image build |
| 14:03.48 | Caelian | s/do to/to do/ |
| 14:12.18 | booxter | how to force OE rebuild packages for older versions if packages with larger PR are not present in packages tree |
| 14:13.08 | *** join/#oe mr_nice (n=nice@77-21-130-108-dynip.superkabel.de) |
| 14:13.08 | kergoth | bitbake -c rebuild foo will rebuild foo. |
| 14:16.05 | booxter | kergoth, the problem is that I messed my BBPATH with actual upstream ones, and when I realized that I don't need them (only packages that I "forked" at some time in the past) I already had lots of packages with newer versions in my build/tmp built. I'd like to downgrade all the packages for which I have only older versions |
| 14:16.51 | booxter | but when I try to build my images I have newer versions supplied :( |
| 14:17.15 | booxter | I don't want to repeat build task from scratch - it costs too much time |
| 14:17.54 | hrw | rm packages from tmp/deploy/*/ipk/* |
| 14:18.42 | *** join/#oe rsalveti (n=salveti@189.2.128.130) |
| 14:19.31 | Caelian | hrw: wouldn't one need to also remove the tmp/stamps/*do_package* files as well for that to work ? |
| 14:20.08 | hrw | no |
| 14:20.17 | booxter | touch: cannot touch `/oe/build/tmp/deploy/glibc/ipk/Packages': No such file or directory |
| 14:20.47 | booxter | ow I understand, I removed the directory too... |
| 14:21.46 | Caelian | ok ... i stand corrected ... still not too intimately familiar with the oe-internals :) |
| 14:24.45 | booxter | hrw, http://pastebin.com/m3e1d667c |
| 14:25.12 | hrw | http://marcin.juszkiewicz.com.pl/2009/02/26/syncing-mobile-devices/ |
| 14:25.45 | hrw | booxter: I love how opkg suxx with messaging |
| 14:26.50 | booxter | hrw, me too. but wtf?:) |
| 14:27.08 | booxter | it occured after I removed all the ipk/ contents |
| 14:33.41 | *** join/#oe Omegamoon (n=egoe@demolitionman.xs4all.nl) |
| 14:44.18 | CIA-2 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * rf8e5442bb3 10openembedded.git/: Merge branch 'org.openembedded.dev' of git@git.openembedded.net:openembedded into org.openembedded.dev |
| 14:44.18 | CIA-2 | 03Koen Kooi <koen@openembedded.org> 07org.openembedded.dev * rbe8f0f5b8f 10openembedded.git/packages/dsplink/gstreamer-ti_svn.bb: gstreamer-ti: bump to r127 |
| 14:51.55 | *** join/#oe Sup3rkiddo (n=sudharsh@unaffiliated/sudharsh) |
| 14:52.10 | *** join/#oe zecke (n=ich@92.116.88.11) |
| 14:54.15 | booxter | what are samba and samba-essential for? |
| 14:57.21 | *** join/#oe frikker (n=blaine@107.135.68.216.DED-DSL.fuse.net) |
| 14:58.21 | *** join/#oe fraxinas (n=quassel@p54AA5BB2.dip.t-dialin.net) |
| 14:58.26 | *** join/#oe kergoth (n=kergoth@65.200.49.156) |
| 14:58.57 | fraxinas | hi there |
| 14:59.12 | fraxinas | i have problems with the latest gstreamer releases |
| 14:59.25 | fraxinas | seems they upgraded to a new libtool version |
| 14:59.52 | fraxinas | and since then it tries using the host machine's libs in /usr/lib instead of the staging target specific ones |
| 15:00.10 | fraxinas | it also doesn't build a mipsel-linux-libtool any more, just a normal one |
| 15:00.26 | kergoth | morning |
| 15:00.47 | zecke | fraxinas: well, OE is running autoreconf... |
| 15:01.34 | fraxinas | i noticed that the main libtool configuration used to be in aclocal.m4 and now moved to a new file m4/libtool.m4 of the working dir |
| 15:02.36 | fraxinas | here's what i posted on their bugzilla: http://bugzilla.gnome.org/show_bug.cgi?id=572532 |
| 15:03.14 | zecke | fraxinas: what happens if you do do_configure_prepend() \n{ \nrm ${S}/m4/libtool.m4 \n} ? |
| 15:03.46 | fraxinas | i shall try. just a moment. |
| 15:06.06 | cdbot2 | * * OE Bug 5044 has been created by di(AT)fh-wedel.de |
| 15:06.08 | cdbot2 | * * The source archive for dash 0.5.2 is no longer downloadable |
| 15:06.10 | cdbot2 | * * http://bugs.openembedded.net/show_bug.cgi?id=5044 |
| 15:07.31 | fraxinas | cool that's new |
| 15:07.41 | kergoth | RP: ping |
| 15:08.38 | fraxinas | zecke: http://pastebin.com/d57b41849 |
| 15:09.14 | zecke | fraxinas: I'm on a GPRS line and have some downloads going, use words :) |
| 15:09.50 | *** join/#oe CosmicPenguin (n=nobody@66-162-99-237.static.twtelecom.net) |
| 15:09.56 | zecke | ah it loaded here... okay... hmm |
| 15:10.02 | fraxinas | oh okay so the main problem is this i guess: checking host system type... mipsel-unknown-linux-gnu |
| 15:10.36 | zecke | fraxinas: this is not instantiating libtool at all now... the basic idea is: We have our own libtool and apps should use it |
| 15:10.46 | fraxinas | i think it doesn't like haveing that m4 deleted |
| 15:10.56 | kergoth | RP: with bitbake 1.8.13, rebuild is .. not useful. it refuses to clean, it wants to get a successful execution of the default task first. if you're getting an error in a task, then rebuild is useless as is |
| 15:11.28 | zecke | fraxinas: well, what is inside the libtool.m4? just a copy of the original or some additional things? |
| 15:11.38 | fraxinas | yeah i've read that nice line before... # Always use our own libtool. |
| 15:11.48 | *** join/#oe chouimat|work (n=dieu@kde/developer/chouinard) |
| 15:12.09 | fraxinas | i haven't gotten around to comparing it line-by-line to the old code... it's over 7000 lines :/ |
| 15:12.47 | fraxinas | it pretty much contains stuff that looks like what used to be in aclocal.m4 in the previous release |
| 15:14.20 | *** join/#oe mickey|cafe (n=mickey@p4FDCACBA.dip0.t-ipconnect.de) |
| 15:15.04 | fraxinas | sorry i'm such an autotools n00b :/ |
| 15:15.08 | RP | kergoth: pong |
| 15:15.29 | RP | kergoth: rebuild is probably broken :( |
| 15:15.54 | RP | kergoth: I remember trying to fix it and finding no nice way to do it |
| 15:15.58 | kergoth | okay, just making sure someone knew about it. not that difficult to manually clean and rerun like we used to |
| 15:16.12 | kergoth | what changed to make it not work? |
| 15:16.47 | RP | kergoth: I switched build.py not to have its own task graphs and use the main one from runqueue/taskdata |
| 15:16.58 | kergoth | ah |
| 15:17.29 | RP | It was a worthwhile code cleanup and rebuild breaking was the main fallout |
| 15:17.44 | zecke | RP: hey! |
| 15:17.49 | RP | hi zecke |
| 15:18.25 | RP | kergoth: We had to do that to get packaged-staging stamp handling to work iirc |
| 15:26.44 | kergoth | fyi, package_stagefile_shell explodes if you move DEPLOY_DIR out of TMPDIR :) |
| 15:31.25 | kergoth | RP: thought about reworking the bitbake versioning? if oe tasks get broken in a micro version, maybe you should consider bumping the minor or major instead. |
| 15:32.25 | RP | kergoth: I don't quite follow? |
| 15:32.59 | kergoth | micro versions should be for bugfixes, not cleanup that breaks things |
| 15:33.16 | RP | kergoth: Ah, that version number :) |
| 15:33.26 | kergoth | i'd argue against staying on the 1.8 branch with changes like that |
| 15:33.27 | kergoth | nods |
| 15:33.50 | RP | kergoth: I know what you mean |
| 15:34.22 | RP | People are kind of comfortable with the 1.8 series though and I'm kind of ok leaving it at that untill trunk is ready... |
| 15:34.26 | kergoth | seems like a lot of projects fall into this mode, where they are so nervous to bump the major, they end up on a bugfix branch indefinately :) |
| 15:34.56 | RP | kergoth: The plan is to have 1.9 -> 2.0 with the UI split code |
| 15:35.01 | kergoth | well, i could easily see someone following the 1.8 branch in their production use, to pick up bugfixes, and suddenly finding the tools that used to work in their daily operation no longer do. |
| 15:35.04 | kergoth | and that's problematic, imo |
| 15:35.21 | RP | Yes, it wasn't intentional to break rebuild :/ |
| 15:35.23 | hrw | kergoth: agreed |
| 15:35.31 | hrw | I use 1.9 anyway |
| 15:36.49 | RP | kergoth: Basically I agree but I'd prefer not to rock the boat and continue with the 1.9 -> 2.0 plan |
| 15:37.17 | kergoth | makes sense. please consider a hard versioning policy for post 2.0 though :) |
| 15:38.25 | Tartarus | Random bitbake question, will 1.9 use git archive ? |
| 15:39.41 | kergoth | RP: are the bitbake plans for going forward written down anywhere? |
| 15:39.42 | *** join/#oe Jay7 (n=jay@93-81-1-160.broadband.corbina.ru) |
| 15:41.25 | RP | Tartarus: Depends if someone sends patches ;-) |
| 15:41.25 | hrw | kergoth: parts probably in poky/trunk changelog ;D |
| 15:41.40 | RP | kergoth: various things have been mentioned on various mailing lists |
| 15:41.43 | RP | nothing official |
| 15:41.43 | kergoth | heh :) |
| 15:42.25 | kergoth | would like to get back into the swing of things.. mostly back up to speed with the changes in OE, though packaged staging is still voodoo, but want to get up to speed with what needs doing in bitbake so he can contribute there |
| 15:43.19 | RP | kergoth: It really needs the UI split and xmlrpc stuff stress testing |
| 15:45.10 | kergoth | not my area of expertise, but what the heck, need something to do |
| 15:45.13 | kergoth | heh |
| 15:45.16 | mickey|cafe | sounds good |
| 15:45.19 | kergoth | looks over that code |
| 15:45.52 | mickey|cafe | I'd be tempted to rewrite performance critical stuff in Vala |
| 15:46.06 | mickey|cafe | but i need some months off |
| 15:46.08 | mickey|cafe | for that |
| 15:47.22 | kergoth | i think itd be kind of neat to have a version where the classes are code, holding to a specific api and versioning scheme... whether they're python classes or .net assemblies or whatever.. just one of those oddball possibilities thats been floating around my head |
| 15:47.40 | mickey|cafe | yeah |
| 15:48.53 | kergoth | ironpython could be fun to play around with, could write the classes in f# or something. hehe |
| 15:50.04 | kergoth | oh, i wanted to ask, what's the current required version of python for bitbake? |
| 15:50.17 | kergoth | so i know what i can use in it |
| 15:50.37 | kergoth | any of you guys played with the Nix package manager? |
| 15:50.40 | hrw | kergoth: 2.4 still iirc |
| 15:50.41 | kergoth | it's an interesting concept |
| 15:50.51 | RP | 2.4 as I understand it for 1.8 |
| 15:50.56 | kergoth | k |
| 15:50.59 | RP | 1.0 is 2.5 |
| 15:51.06 | RP | 1.9 is 2.5 even |
| 15:54.02 | *** join/#oe bergelin (n=bergelin@c80-216-149-138.bredband.comhem.se) |
| 16:03.59 | mickey|cafe | feel free to bump 1.9 to 2.6, but don't even think about 3.0 |
| 16:04.45 | RP | mickey|cafe: I don't have 2.6 so that won't happen quite yet ;-) |
| 16:04.55 | mickey|cafe | righto |
| 16:05.20 | mickey|cafe | although 2.6 is a straightforward update |
| 16:05.24 | hrw | 2.5 is in most of distros but 2.6 not yet |
| 16:07.08 | flameman | :) |
| 16:07.43 | flameman | is this a right place to ask about iPAQ 36** ? |
| 16:10.18 | hrw | flameman: personally I would just put them into drawer to make them gather dust |
| 16:10.36 | *** join/#oe marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 16:10.55 | flameman | :P |
| 16:11.26 | *** join/#oe |miska| (n=|miska|@lomikel.karlin.mff.cuni.cz) |
| 16:12.06 | hrw | flameman: unless you want to play with developing drivers for device which has 15 users on whole glob ;D |
| 16:12.33 | flameman | ahaha |
| 16:12.52 | flameman | http://www.elinux.org/Ipaq-Flameman |
| 16:13.05 | hrw | flameman: I saw that blob of misc text yesterday |
| 16:13.17 | flameman | ok |
| 16:13.21 | hrw | flameman: split it into separate pages to make it readable |
| 16:13.44 | flameman | good suggestion :) i will split in the next rewrite ! |
| 16:14.17 | flameman | more progress today |
| 16:14.29 | flameman | the stage4 is at his 40% :P |
| 16:14.43 | flameman | issues are still in the kernel side |
| 16:15.18 | hrw | flameman: I do not care about how gentoo works on any device. for h36xx the thing which needs work is kernel. userspace just works |
| 16:15.46 | flameman | well the issue is in the sleeve 2xpcmcia device |
| 16:15.51 | flameman | in the IrDA device |
| 16:16.00 | flameman | other things are well working |
| 16:16.40 | flameman | unfortunately without a 2xpcmcia sleeve you can't have any connectivity ! |
| 16:16.53 | hrw | and space for rootfs |
| 16:17.02 | flameman | exactly |
| 16:17.26 | flameman | actually the rootfs is on a microdrive (4Gb), attached to a pcmcia to cf2 |
| 16:17.27 | Jay7 | hm.. new fvwm is out.. |
| 16:17.46 | Jay7 | looks that I should create new recipe.. |
| 16:17.59 | flameman | anyway as the fact i can't contact anybody interested about h36** |
| 16:18.10 | flameman | i ve planned to switch myself to h5550 |
| 16:18.33 | CIA-2 | 03Michael 'Mickey' Lauer <mickey@vanille-media.de> 07mickey/org.openembedded.dev * rb7f96978a7 10openembedded.git/packages/linux/linux-openmoko-2.6.28_git.bb: |
| 16:18.33 | CIA-2 | linux-openmoko-2.6.28: build out of the stable branch; bump to latest |
| 16:18.33 | CIA-2 | version |
| 16:18.36 | flameman | so i will rewrite the ewiki page converting my work for the new platform |
| 16:18.37 | flameman | :) |
| 16:18.44 | hrw | flameman: h5xxx are better supported |
| 16:18.50 | flameman | yes ! openmoko will be supported, too :D |
| 16:19.05 | flameman | hrw yes, they are arm v4 pxa2*** |
| 16:19.08 | mickey|cafe | working on HTC raphael these days |
| 16:19.17 | flameman | so lcd framebuffer is attached to it |
| 16:19.23 | mickey|cafe | i think the HTC are the most interesting non-free devices these days |
| 16:19.37 | flameman | on h36** everything is attached to sa11** that suxs |
| 16:19.49 | hrw | flameman: h5xxx is armv5te not armv4 |
| 16:20.14 | flameman | is should be pax2***, isn't it ? |
| 16:20.22 | *** join/#oe darion76 (n=darion76@94-248-41-40.dynamic.peoplenet.ua) |
| 16:20.36 | flameman | pax2 is v4, but it may be i am wrong |
| 16:20.40 | hrw | pxa250/255 is armv5te |
| 16:20.45 | CosmicPenguin | mickey|cafe: what sorts of things are you doing with the Raphael? |
| 16:20.55 | hrw | all XScale are armv5te |
| 16:21.33 | flameman | hrw ok :) in any case a stage4 arm v4 little endian should be fine the same |
| 16:21.36 | mickey|cafe | CosmicPenguin: trying to port FSO to it |
| 16:21.42 | mickey|cafe | so we have middleware |
| 16:21.52 | mickey|cafe | and then cowork with SHR or what not to put a UI on top |
| 16:22.03 | mickey|cafe | bbl, need to leave the cafe now |
| 16:24.33 | flameman | i have to debug a mmc_over_gpio now, i wrote that driver but there is something wrong about the amount of the byte |
| 16:24.52 | flameman | it says that a 2Gb mmc/sd card is "512Mb" |
| 16:25.01 | flameman | that's funny :P |
| 16:25.27 | flameman | sandisk handbook has been donwloaded and i am enjoying it :D |
| 16:27.08 | pb_ | it is a bit sad that 2.6 still doesn't work on h3600. those drivers have been 90% complete for years now. |
| 16:27.09 | hrw | flameman: how old kernel? |
| 16:28.08 | flameman | 2.6.26 |
| 16:28.26 | flameman | pb_ |
| 16:28.42 | flameman | the sleeve 1xpcmcia is working, the 2xpcmcia is not |
| 16:29.07 | flameman | you can check it out from the hh repositories (kernel 2.6.21.hh) |
| 16:29.48 | flameman | here i am working with both the kernel series: vanilla 2.6.26 + patch, handhelds patched 2.6.21.hh |
| 16:30.20 | flameman | the issues is related to the sa11**, the way it handles his pcmcia support for 2 pcmcia slots |
| 16:30.58 | *** join/#oe xjqian (n=gordon@68-188-80-83.dhcp.stls.mo.charter.com) |
| 16:31.07 | pb_ | right. it's clearly not intractable though, it works in the 2.4 kernel. |
| 16:31.39 | flameman | dunno, i suppose it was worked with 2.4, never checked |
| 16:31.47 | *** join/#oe pcgeil (n=steffen@p549E63CD.dip.t-dialin.net) |
| 16:32.22 | flameman | i contacted a developers by email ... still waiting for a reply |
| 16:32.36 | hrw | flameman: handhelds.org developers? |
| 16:32.43 | flameman | it seems nobody is working / interested / active with 36** |
| 16:32.45 | pb_ | yes, it did work in 2.4. that's why I say it is a bit sad that, four or five years later, these things still don't work in 2.6. |
| 16:32.47 | flameman | hrw yes |
| 16:33.07 | *** join/#oe Ojg (n=Ojg@c-83-233-228-68.cust.bredband2.com) |
| 16:33.13 | flameman | all the people i can see in the email list |
| 16:33.16 | pb_ | still, it sounds like the h3600 support in 2.6 is much better now than it used to be. |
| 16:33.31 | flameman | it is not |
| 16:33.40 | flameman | also the LCD has an other issue |
| 16:34.09 | flameman | so .. no 2xpcmcia, no Irda, no connectivity ... and the LCD that power off in 90 sec |
| 16:34.28 | flameman | anyway the machine is well compiling with an uptime of 4 days |
| 16:34.45 | flameman | (that is sad, cause it should be a PDA) |
| 16:35.38 | pb_ | well, if the single pcmcia sleeve works then presumably you can have connectivity that way. otherwise there's always usbnet, though obviously that doesn't work too well in a mobile environment. |
| 16:36.22 | hrw | pb_: usbnet and sa11xx == problem |
| 16:36.29 | pb_ | it is a bit of a shame that the lcd is broken but presumably that also can't be too hard to fix. if all the h3600_micro bits are working: charger, touchpanel, that kind of thing, then everything else should be fairly straightforward. |
| 16:36.36 | hrw | I do not remember is it supported in mainline |
| 16:36.39 | pb_ | oh, right, I forgot about the sa11xx suckage with usb |
| 16:36.44 | flameman | usb is not working |
| 16:36.48 | flameman | irda is not working |
| 16:37.00 | flameman | the only pcmcia is used for the rootfs |
| 16:37.01 | hrw | Thomas Kunze worked on sa11xx usb gadget driver some time ago |
| 16:37.16 | flameman | well now it is not working |
| 16:37.22 | flameman | you mean old kernel ? |
| 16:37.25 | flameman | 2.6.12 ? |
| 16:37.45 | kergoth | err, i think packaged staging just tried to install opkg-native into staging, but opkg from opkg-native isn't there to install it.. |
| 16:37.47 | kergoth | scratches head |
| 16:37.49 | flameman | usbned = issue ! |
| 16:38.03 | flameman | (tested on 2.6.21) |
| 16:38.49 | flameman | ahahah to be extremely sad |
| 16:39.04 | flameman | i could use the /dev/ttySA0 as pppd dev |
| 16:39.20 | flameman | just a serial slip net :D |
| 16:39.35 | flameman | (but i have to remove and loose the console) |
| 16:39.42 | flameman | (console = ttySA0) |
| 16:40.18 | hrw | LinuxToGo is now present in LinuxDevices embedded survey ;) |
| 16:40.25 | hrw | thanks for all which mailed LD |
| 16:41.39 | khem` | kergoth: hmm it installs ok for me |
| 16:42.04 | khem` | kergoth: I have opkg-cl in staging |
| 16:42.12 | kergoth | i just did a build of an image, wiped tmp, then built again (with pstage outside of tmp) |
| 16:42.18 | mckoan | hrw: seems that Henry (of LD) have had a lot of correction requests today :-) |
| 16:42.28 | kergoth | then it used pstage for everything, including opkg-native, and failed |
| 16:42.29 | hrw | indeed |
| 16:42.36 | kergoth | i had to clean adand rebuild opkg-native, then it went fine |
| 16:42.44 | khem` | kergoth: ah I did not try that |
| 16:42.52 | khem` | kergoth: hmm |
| 16:45.06 | mckoan | noticed a lot of liveliness with LinuxDevices poll, and this is a good thing for OE and for Linux! :-D |
| 16:50.04 | pb_ | mickeyl: good morning |
| 16:50.28 | mickeyl | good morning pb_ |
| 16:52.07 | *** join/#oe vivijim (n=vivijim@unaffiliated/vivijim) |
| 17:09.16 | *** join/#oe putukas (n=putukas@dsl5401C1C3.pool.t-online.hu) |
| 17:09.41 | tharvey | anyone know why I would be getting 'Stale NFS file handle' when trying to read/write to a CF with OE built filesystem on target - I dont' have any nfs or otherwise network mounted filesystems |
| 17:10.08 | tharvey | or nfsd running... |
| 17:11.42 | CIA-2 | 03Michael 'Mickey' Lauer <mickey@vanille-media.de> 07mickey/org.openembedded.dev * r13ac0a793a 10openembedded.git/conf/distro/include/sane-srcrevs.inc: sane-srcrevs: bump linux-openmoko-2.6.28 |
| 17:11.52 | CIA-2 | 03Michael 'Mickey' Lauer <mickey@vanille-media.de> 07mickey/org.openembedded.dev * r4ca003cb04 10openembedded.git/packages/linux/ (16 files in 2 dirs): linux-openmoko-2.6.28: remove patches that have been applied upstream |
| 17:12.00 | *** join/#oe xjqian (n=gordon@mir-nil-pat-118-150.wustl.edu) |
| 17:12.08 | CIA-2 | 03zecke123 07bitbake-1.8 * r1151 10/lib/bb/fetch/git.py: Clean up by Otavio Salvador |
| 17:13.10 | zecke | RP: in case you wonder, I will put that into trunk as well.. just fetching the sources |
| 17:16.47 | RP | zecke: cool, np :) |
| 17:18.27 | kergoth | anyone mind if i update all the fetchers to use runfetchcmd method, so they all obey the metadata PATH? |
| 17:19.31 | pb_ | tharvey: what filesystem are you using? |
| 17:20.23 | *** join/#oe bergelin (n=bergelin@c80-216-149-138.bredband.comhem.se) |
| 17:20.29 | pb_ | various non-nfs filesystems do have the capability to generate ESTALE under certain circumstances. |
| 17:21.47 | *** join/#oe putukas (n=putukas@dsl5402DA80.pool.t-online.hu) |
| 17:24.42 | tharvey | pb_, the particular fs is ext2 on a CompactFlash |
| 17:26.11 | pb_ | tharvey: best to check the ext2 code then, see what causes it to emit that error |
| 17:27.14 | tharvey | ok thx |
| 17:31.00 | CIA-2 | 03Michael 'Mickey' Lauer <mickey@vanille-media.de> 07mickey/org.openembedded.dev * r9b4c27d165 10openembedded.git/ (conf/distro/include/sane-srcrevs.inc packages/qi/qi.inc): qi: enable build debug output again and bump to latest version |
| 17:31.34 | CIA-2 | 03Jan Lübbe <jluebbe@debian.org> 07fso/milestone5.5 * r6c8e82e903 10openembedded.git/ (3 files in 3 dirs): libexif: add 0.6.17 (security/bugfix release) and update it in preferred-om-2008-versions |
| 17:31.37 | CIA-2 | 03Jan Lübbe <jluebbe@debian.org> 07fso/milestone5.5 * r22e9328e78 10openembedded.git/packages/images/fso-image.bb: fso-image: add cellhunter |
| 17:31.38 | CIA-2 | 03Jan Lübbe <jluebbe@debian.org> 07fso/milestone5.5 * r2830c21b55 10openembedded.git/packages/freesmartphone/ (menu-freesmartphone.bb menu-freesmartphone/applications.menu): menu-freesmartphone: create a simple XDG menu for illume which shows all applications |
| 17:31.38 | CIA-2 | 03Jan Lübbe <jluebbe@debian.org> 07fso/milestone5.5 * r6daf9b8afe 10openembedded.git/ (3 files in 2 dirs): tangogps: upgrade to 0.9.6 |
| 17:31.40 | CIA-2 | 03Jan Lübbe <jluebbe@debian.org> 07fso/milestone5.5 * r5825c2dfa7 10openembedded.git/packages/e17/e-wm_svn.bb: e-wm: split out XDG menu definition into e-wm-menu |
| 17:31.43 | CIA-2 | 03Jan Lübbe <jluebbe@debian.org> 07fso/milestone5.5 * rdf101dfac1 10openembedded.git/packages/images/fso-image.bb: fso-image: use menu-freesmartphone and drop the .desktop file hack |
| 17:33.16 | *** part/#oe mpoullet (n=mpoullet@proxye.avm.de) |
| 17:38.17 | *** join/#oe robtow (n=rtow@nat/montavista/x-cf4fc7cf3988e19c) |
| 17:43.40 | *** join/#oe hrw (n=hrw@chello089078173235.chello.pl) |
| 17:46.42 | RP | kergoth: I thought we'd done that? |
| 17:46.52 | RP | kergoth: It was certainly the intention anyway... |
| 17:47.38 | kergoth | done what? i forgot what i said :) |
| 17:47.48 | kergoth | trying to do too much at once, clearly |
| 17:48.00 | RP | kergoth: "anyone mind if i update all the fetchers to use runfetchcmd method, so they all obey the metadata PATH?" |
| 17:48.25 | kergoth | oh, right, i didn't check trunk, feel free to ignore me :) |
| 17:48.41 | RP | trunk may be bust as well, I really don't know |
| 17:48.50 | RP | I know what the intention was :) |
| 17:48.53 | kergoth | just got bit by 1.8's wget fetcher doing its own fetch command execution |
| 17:49.09 | kergoth | overriding the FETCHCOMMAND is easy enough, but .. :) |
| 17:49.24 | RP | had fun with that in a world of firewall pain |
| 17:49.57 | *** join/#oe sakoman (n=sakoman@static-74-41-60-154.dsl1.pco.ca.frontiernet.net) |
| 17:54.39 | hrw|gone | bye all |
| 17:58.11 | CIA-2 | 03zecke123 * r1152 10bitbake/lib/bb/fetch/git.py: Clean up by Otavio Salvador |
| 18:02.53 | udovdh | hello |
| 18:03.00 | udovdh | I am tying to bitbake libgpsmgr |
| 18:03.04 | udovdh | I get an error: http://pastebin.com/d34adad44 |
| 18:03.13 | udovdh | anybody got an idea on how to fix? |
| 18:09.25 | mr_nice | udovdh: you can try to look at configure.ac and look at AC_INIT there |
| 18:10.00 | kergoth | RP: ever thought about BBFILES = "${@' '.join([path for path in d.getVar('BBPATH', 1).split(':')])}" ? |
| 18:10.24 | kergoth | RP: with some fixes so it doesn't try to parse directories, instead ignoring them, it does work |
| 18:10.35 | kergoth | (same for nonexistant paths) |
| 18:10.59 | kergoth | 's doing all sorts of oddball things lately |
| 18:11.12 | udovdh | mr_nice, will have a look |
| 18:11.49 | udovdh | AC_INIT(Makefile.am) it says |
| 18:12.04 | *** join/#oe ClashTheBunny (i=c72ec6e6@gateway/web/ajax/mibbit.com/x-3dadd291a7a3cddc) |
| 18:12.46 | udovdh | mr_nice, so what next? |
| 18:13.59 | udovdh | error: http://pastebin.com/d34adad44 |
| 18:14.44 | mr_nice | udovdh: I am no autoconf expert the error message tell that ac_init needs package and version |
| 18:15.03 | udovdh | so the format becomes? |
| 18:15.14 | udovdh | AC_INIT(Makefile.am, x, y) ? |
| 18:15.18 | udovdh | where x is name |
| 18:15.21 | udovdh | and y is a number? |
| 18:16.54 | mr_nice | udovdh: i don't know the right format |
| 18:17.02 | udovdh | AC_INIT(Makefile.am, x, y) ? |
| 18:17.11 | udovdh | AC_INIT(x, y) it is |
| 18:18.26 | udovdh | I also see Can't locate Date/Parse.pm in @INC |
| 18:18.31 | udovdh | isn't that fatal? |
| 18:20.16 | *** join/#oe garren (n=garren@41.246.5.68) |
| 18:24.50 | garren | morning all |
| 18:25.06 | garren | does openembedded work with the freescale i.mx processors? |
| 18:28.50 | khem | garren: I see conf/machine/mx31ads.conf conf/machine/mx31moboard.conf |
| 18:29.00 | XorA | it should do |
| 18:30.38 | CIA-2 | 03Frans Meulenbroeks <fransmeulenbroeks@gmail.com> 07org.openembedded.dev * r064adeb426 10openembedded.git/ (4 files in 3 dirs): pmount: updated to 0.9.18 |
| 18:31.31 | *** join/#oe greentux (n=lemke@BAA201c.baa.pppool.de) |
| 18:32.43 | broonie | garren: I use an OE userspace regularly on i.MX31. |
| 18:33.04 | broonie | The ADS config is borked due to bitrot in the kernel recipie. |
| 18:33.16 | broonie | but mx31moboard is actively developed. |
| 18:35.39 | garren | awesome thanks broonie and khem |
| 18:38.14 | udovdh | still looking at this error: http://pastebin.com/d34adad44 |
| 18:38.19 | udovdh | anyone got a tip? |
| 18:38.57 | khem | udovdh: what version are you compiling |
| 18:39.12 | udovdh | the one in OE.dev |
| 18:39.14 | udovdh | euhm... |
| 18:39.23 | udovdh | 0.1 |
| 18:39.35 | udovdh | in the maemo4 directory |
| 18:40.05 | udovdh | I see perl Date module missing |
| 18:40.14 | udovdh | and autoconfig stuff |
| 18:40.16 | udovdh | wrong |
| 18:41.19 | *** join/#oe valhalla (n=valhalla@81-174-25-183.dynamic.ngi.it) |
| 18:42.16 | khem | this build fine for me. so I guess something wrong with your env or host machine |
| 18:45.39 | udovdh | khem, any suggestions? dependencies ? |
| 18:46.06 | udovdh | see http://wiki.navit-project.org/index.php/Navit_on_OpenEmbedded_for_n810 for some documentation of my progress |
| 18:47.59 | udovdh | perl 5.8.8 is built here. right version? |
| 18:49.02 | kergoth | RP: ping |
| 18:58.15 | kergoth | zecke: ping |
| 19:00.08 | zecke | pong |
| 19:01.54 | kergoth | zecke: bitbake has a variable called BBPKGS.. it goes in the list of packages to be built.. but those packages are _always_ built, even if the user specifies what they want to build on the cmdline. I can't think of a use case for that behavior. If we changed it to only build that if the user doesn't specify on the cmdline, then you could have a sane default provider to be built, letting someone "cd foo; . ./env; bitbake" assuming the right setup |
| 19:01.59 | kergoth | opinion? |
| 19:07.38 | *** join/#oe Dremel (n=bmyers@ool-45799c35.dyn.optonline.net) |
| 19:07.59 | *** join/#oe Bernardo (n=Bernardo@sourcemage/Bernardo) |
| 19:08.23 | zecke | sure |
| 19:09.29 | udovdh | still looking at this error: http://pastebin.com/d34adad44 |
| 19:09.42 | udovdh | is the error the cause of a host-side autoconf problem? |
| 19:09.50 | udovdh | (Fedora 10 x86_64) |
| 19:10.29 | *** join/#oe pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 19:12.11 | Dremel | hi all |
| 19:13.59 | Dremel | is qemu-native-0.9.1+svnr4242-r14 broken? bitbake barfed while trying to compile it. |
| 19:18.31 | Tartarus | ~pastebin |
| 19:18.32 | ibot | [~pastebin] A "pastebin" is a web-based service where you can paste anything over 3 lines without flooding the channel. Here are links to a few : http://www.pastebin.com , http://pastebin.ca , http://channels.debian.net/paste , http://paste.lisp.org , http://www.rafb.net/paste |
| 19:18.34 | Tartarus | show us the problem :) |
| 19:18.45 | Dremel | something about :| /home/bmyers/OE_Palm/stuff/tmp/work/i686-linux/qemu-native-0.9.1+svnr4242-r14/trunk/target-i386/ops_sse.h:597: error: unable to find a register to spill in class `GENERAL_REGS' |
| 19:19.09 | Tartarus | ah |
| 19:19.15 | Dremel | ah ha ha |
| 19:19.16 | Tartarus | So, what distro? |
| 19:19.25 | Tartarus | the problem is qemu-native needs gcc-3.4 |
| 19:19.36 | Tartarus | and in some cases, the host one might be found, used, but be too old still |
| 19:19.39 | Dremel | ah ah ha, 3.4 is not my default |
| 19:19.44 | Dremel | 4 is |
| 19:19.53 | Tartarus | yes |
| 19:20.01 | Tartarus | but if you have a host gcc-3.4 as well, it calls it by name |
| 19:20.04 | Tartarus | but that might still be "wrong" |
| 19:20.11 | Tartarus | and the gcc-3.4 OE builds not get used |
| 19:20.48 | Dremel | is there something very special about this qemu? I have the ubuntu installed and the hackndev and they work |
| 19:25.19 | Tartarus | Lets say yes :) |
| 19:25.25 | Dremel | i get the point.. |
| 19:25.26 | Tartarus | So, what distro? |
| 19:25.37 | Tartarus | And if you do 'gcc-3.4<tab> what do you get? |
| 19:25.59 | Dremel | ubuntu |
| 19:26.31 | Dremel | i have 3.4 install but i have to call it that way... gcc-3.4 not just gcc |
| 19:26.55 | Tartarus | OK |
| 19:27.11 | Tartarus | Do you have 'ASSUME_PROVIDED += "gcc-3.4-native" or so in your local.conf? |
| 19:27.31 | Dremel | hmm. in the build dir you mean? |
| 19:27.44 | Tartarus | in your local.conf file |
| 19:29.26 | Dremel | # ASSUME_PROVIDED += "virtual/${TARGET_PREFIX}gcc virtual/libc" |
| 19:29.40 | Tartarus | OK |
| 19:29.44 | CIA-2 | 03woglinde <heinold@inf.fu-berlin.de> 07org.openembedded.dev * rcf7e4c7dbd 10openembedded.git/packages/update-alternatives/ (3 files in 2 dirs): update-alternatives: update to newer version of dpkg |
| 19:29.52 | Tartarus | What branch of OE are you using, the .dev branch? |
| 19:31.04 | Tartarus | This should be working in .dev, but if you were on stable perhaps that would exlpain it |
| 19:31.04 | Dremel | should be this one |
| 19:31.08 | Dremel | $ svn co svn://svn.berlios.de/bitbake/branches/bitbake-1.8/ bitbake |
| 19:31.16 | Tartarus | branch of OE, not bitbake, sorry |
| 19:32.08 | Dremel | i iwas working from this |
| 19:32.11 | Dremel | http://wiki.openembedded.net/index.php/Getting_Started |
| 19:32.28 | Dremel | $ git clone git://git.openembedded.net/openembedded |
| 19:32.34 | Dremel | should be that right? |
| 19:32.43 | Tartarus | Yeah, hm |
| 19:32.53 | Tartarus | Not sure why, but it looks like the wrong gcc-3.4 is being called |
| 19:33.02 | Tartarus | Do you use gcc-3.4 on your machine for other stuff? |
| 19:33.22 | Dremel | only quirky old shit that will compile only with 3.4 |
| 19:33.43 | Tartarus | hmm, ok |
| 19:33.48 | Dremel | but it is there. |
| 19:33.58 | Tartarus | for now can you apt-get remove gcc-3.4 and bitbake -c rebuild qemu-native |
| 19:33.58 | Tartarus | ? |
| 19:34.26 | Dremel | it doesnt like 3.4 or it needs 3.4? |
| 19:34.35 | Tartarus | It needs certain versions of 3.4 |
| 19:34.40 | Tartarus | And will build the one it needs |
| 19:34.47 | Tartarus | My theory is that it's calling the wrong one, your host one |
| 19:34.59 | Tartarus | because qemu tries to be overly smart and outsmarts OE |
| 19:35.41 | *** join/#oe florian (n=fuchs@f049171179.adsl.alicedsl.de) |
| 19:35.42 | Dremel | just remove 3.4? |
| 19:38.58 | Tartarus | yes |
| 19:39.17 | Dremel | done. it's cooking on task do_compile: started |
| 19:39.30 | Dremel | task #115 |
| 19:40.07 | Dremel | gonna go get a bit bucket incase it pukes again... |
| 19:42.12 | *** join/#oe mrmoku|away (n=mrmoku@ppp-62-216-220-123.dynamic.mnet-online.de) |
| 19:43.23 | *** join/#oe Bernardo (n=Bernardo@host61-40-dynamic.33-79-r.retail.telecomitalia.it) |
| 19:47.47 | *** join/#oe woglinde (i=woglinde@e179081137.adsl.alicedsl.de) |
| 19:48.25 | mr_nice | woglinde hi |
| 19:48.31 | woglinde | hi |
| 19:59.03 | woglinde | mr_nice did you work on the simpad lately? |
| 20:08.40 | *** join/#oe xjqian (n=gordon@mscitspubwlgw.wustl.edu) |
| 20:09.26 | mr_nice | woglinde: a bit but i am currently more working on userland/opie |
| 20:09.49 | woglinde | ah okay |
| 20:11.04 | mr_nice | woglinde: can you give me a hint how to add PREFERRED_PROVIDER_virtual/libsdl ?= "libsdl-qpe" for opie? |
| 20:11.56 | woglinde | hm |
| 20:12.09 | woglinde | do we have a class for opie? |
| 20:12.39 | woglinde | jupp |
| 20:12.43 | woglinde | I would set it there |
| 20:12.55 | woglinde | but better ask on the mailing list too |
| 20:13.06 | mr_nice | woglinde: ok, thanks |
| 20:13.16 | woglinde | hm |
| 20:13.17 | woglinde | args |
| 20:13.18 | woglinde | nope |
| 20:14.27 | woglinde | hm nope |
| 20:14.33 | woglinde | its a candiate for local.conf |
| 20:14.35 | woglinde | or distro |
| 20:14.57 | woglinde | or for opie-image |
| 20:15.15 | mr_nice | hm, the image may be the best compromise |
| 20:16.27 | mr_nice | if the libsdl-qpe has the same version as libsld-x11 is it possible to use packages which where build with libsdl-x11 with libsdl-qpe? |
| 20:16.51 | woglinde | hm dont know |
| 20:16.54 | woglinde | I guess no |
| 20:16.58 | woglinde | but not 100% sure |
| 20:17.11 | mr_nice | ok thanks i will try it out |
| 20:21.59 | Dremel | Tartarus-- thanks. that did the trick.. |
| 20:30.42 | *** part/#oe darion76 (n=darion76@94-248-41-40.dynamic.peoplenet.ua) |
| 20:32.55 | mwester | notes that his emails to the oe list are not going through, and wonders if someone has decided to moderate the list. |
| 20:33.09 | *** join/#oe jbs (n=Bernardo@host107-38-dynamic.183-80-r.retail.telecomitalia.it) |
| 20:34.34 | Gnutoo | woglinde, hi,I don't know what to do about emacs/emacs-x11:I saw emacs(non x11) in the FSO-unstable reposiroty but me and other people were unable to compile(there was somebody that reported a build failure in one of the lists I follow) it so I fixed it but I'm not sure if the fix are ok,moreover I used a qemu that was highly modified(and I don't know which patches fix the compilation faillure of emacs)and compiles only fo |
| 20:34.34 | Gnutoo | r arm |
| 20:34.43 | Gnutoo | i'll pastebin the recipe |
| 20:34.57 | woglinde | dorry |
| 20:35.06 | woglinde | I dont know about emacs compilation |
| 20:35.48 | Gnutoo | http://rafb.net/p/V7RyWu66.html |
| 20:35.50 | Gnutoo | ok |
| 20:35.57 | Gnutoo | who should I talk to then? |
| 20:36.41 | woglinde | mailnglist |
| 20:36.48 | Gnutoo | ok thanks |
| 20:36.58 | Gnutoo | just that irc was more convenient and faster... |
| 20:37.31 | Gnutoo | and that I fear the reactions about the modified qemu on the mailing lists |
| 20:46.51 | Crofton|work | if I install a file say libmaniac.a in usr/lib, where would it get packaged? -dev? |
| 20:49.26 | woglinde | Crofton yes |
| 20:49.44 | woglinde | per default all files with .a ends up in the dev-package |
| 20:49.54 | woglinde | look at conf/bitbake.conf |
| 20:50.03 | Crofton|work | thanks, it made sense to me right as I hit return :) |
| 20:54.19 | kergoth | RP: i have a ghetto do_rebuild.. it runs a recursive function that traverses the deps flag :P |
| 20:54.28 | kergoth | RP: does work, though |
| 20:57.34 | woglinde | kergoth what you are working on? |
| 21:02.02 | kergoth | woglinde: lots of stuff, glad i'm getting back in the game, was getting rusty for a while there |
| 21:02.07 | CIA-2 | 03woglinde <heinold@inf.fu-berlin.de> 07org.openembedded.dev * rcf7e4c7dbd 10openembedded.git/packages/update-alternatives/ (3 files in 2 dirs): update-alternatives: update to newer version of dpkg |
| 21:02.18 | CIA-2 | 03Frans Meulenbroeks <fransmeulenbroeks@gmail.com> 07org.openembedded.dev * r064adeb426 10openembedded.git/ (4 files in 3 dirs): pmount: updated to 0.9.18 |
| 21:02.18 | CIA-2 | 03woglinde <heinold@inf.fu-berlin.de> 07org.openembedded.dev * r4c6d99ece8 10openembedded.git/packages/libpng/ (libpng-native_1.2.35.bb libpng_1.2.35.bb): |
| 21:02.19 | CIA-2 | libpng: add version 1.2.35 |
| 21:02.19 | CIA-2 | * fixes security issues |
| 21:12.58 | woglinde | waha |
| 21:13.25 | woglinde | scratches head about git |
| 21:14.41 | BusError | OK after massive amount of research, I got gpe-image compiling. but half the apps crashes (Alignment Traps) :/ |
| 21:15.27 | kergoth | woglinde: what about git? |
| 21:15.40 | woglinde | kergoth I squshed my mislead commit |
| 21:15.50 | woglinde | and now its twice in the log |
| 21:16.31 | woglinde | hm |
| 21:16.37 | woglinde | its only twice in my log |
| 21:16.56 | woglinde | wahaa |
| 21:17.03 | woglinde | I dont get it |
| 21:18.06 | woglinde | hm |
| 21:18.08 | CIA-2 | 03woglinde <heinold@inf.fu-berlin.de> 07org.openembedded.dev * rf902914ccd 10openembedded.git/ (3 files in 2 dirs): |
| 21:18.08 | CIA-2 | libpng: add version 1.2.35 |
| 21:18.08 | CIA-2 | * fixes security issues |
| 21:18.08 | CIA-2 | 03woglinde <heinold@inf.fu-berlin.de> 07org.openembedded.dev * re94b0d5d17 10openembedded.git/: Merge branch 'org.openembedded.dev' of git@git.openembedded.net:openembedded into org.openembedded.dev |
| 21:19.05 | woglinde | can some please pull |
| 21:19.14 | woglinde | and say If there are problems |
| 21:23.28 | *** join/#oe xjqian (n=gordon@mscitspubwlgw.wustl.edu) |
| 21:26.19 | *** join/#oe pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 21:28.58 | Tartarus | back |
| 21:29.08 | *** join/#oe Sleep-Walker (n=Sleep@193.179.96.131) |
| 21:34.36 | *** join/#oe jbs_ (n=Bernardo@host87-178-dynamic.51-79-r.retail.telecomitalia.it) |
| 21:35.33 | khem` | woglinde: libpng 1.2.35 compiled fine for me |
| 21:37.00 | *** join/#oe drw_ (n=drw@cpe-76-187-64-213.tx.res.rr.com) |
| 21:42.14 | *** join/#oe ClashTheBunny (i=c72ec6e7@gateway/web/ajax/mibbit.com/x-230a0dd23a20e827) |
| 21:42.53 | *** part/#oe khem` (n=khem@adsl-71-146-30-62.dsl.pltn13.sbcglobal.net) |
| 21:43.22 | kergoth | denix: ping |
| 21:49.29 | denix | kergoth: pong |
| 21:50.43 | kergoth | denix: enterprise.conf tries to remove certain questionably licensed stuff from the build via BBMASK. if you change its one BBMASK = to: |
| 21:50.45 | kergoth | LDBBMASK := "${BBMASK}" |
| 21:50.46 | kergoth | BBMASK = "${@base_conditional('ENTERPRISE_DISTRO', '1', '(mp3blaster|mpg123|mpg321|smpeg|liba52|lame|libmad|mpeg2dec|xmms-mad|madplay|python-mad|opie-mediaplayer1-libmadplugin|ffmpeg|mplayer)', '${OLDBBMASK}', d)}" |
| 21:50.50 | kergoth | (ugly, yes, but it works) |
| 21:50.53 | kergoth | s/LDBB/OLDBB/ |
| 21:51.15 | *** join/#oe cminyard (n=cminyard@pool-173-57-164-199.dllstx.fios.verizon.net) |
| 21:51.27 | kergoth | course, it still drops your bbmask if ENTERPRISE_DISTRO is 1 in that case, should probably just rewrite the thing as an anonyous function |
| 21:51.29 | kergoth | anonymous, even |
| 21:51.31 | kergoth | heh |
| 21:51.35 | denix | ok, what if I want to use ENTERPRISE_DISTRO and BBMASK? |
| 21:51.47 | denix | right |
| 21:52.01 | kergoth | the issue is, you cant just += something onto bbmask, because its a regex, not a list |
| 21:52.11 | woglinde | khem okay |
| 21:52.14 | woglinde | thanks |
| 21:52.30 | denix | kergoth: that's the problem :) |
| 21:53.19 | kergoth | hmm |
| 21:53.23 | kergoth | tries something |
| 21:55.51 | denix | kergoth: and btw, the question wasn't why it doesn't work, but rather how to fix it... :) as I explained here - http://thread.gmane.org/gmane.comp.handhelds.openembedded/21148, but you probably already knew that :) |
| 21:56.07 | kergoth | ah, i mustve missed that reply |
| 21:56.11 | kergoth | at any rate, working on a fix now :P |
| 21:57.22 | denix | kergoth: thanks a lot! I'm still very bad at Python :( |
| 22:00.05 | *** part/#oe Omegamoon (n=egoe@demolitionman.xs4all.nl) |
| 22:00.07 | *** join/#oe Daga (n=Daga@ppp-70-254-38-26.dsl.lgvwtx.swbell.net) |
| 22:00.25 | Daga | there are DNS problems with "monotone.openembedded.org |
| 22:00.30 | Daga | " |
| 22:00.56 | Crofton|work | we do not use monotone anymore |
| 22:00.58 | denix | Daga: monotone is long since gone... |
| 22:01.08 | Daga | hmm, ok |
| 22:01.13 | BusError | monogone |
| 22:01.28 | Daga | wonders what he gets to do to fix this now ^_^ |
| 22:01.32 | Daga | thanks |
| 22:01.39 | denix | Daga: use git :) |
| 22:02.00 | Daga | this is a part of the build system for ThinStation |
| 22:02.19 | Daga | I'll do some digging :) |
| 22:05.13 | kergoth | OLDBBMASK := "${BBMASK}" |
| 22:05.14 | kergoth | BBMASK = "${@base_conditional('ENTERPRISE_DISTRO', '1', '(${OLDBBMASK})|(mp3blaster|mpg123|mpg321|smpeg|liba52|lame|libmad|mpeg2dec|xmms-mad|madplay|python-mad|opie-mediaplayer1-libmadplugin|ffmpeg|mplayer)', '${OLDBBMASK}', d)}" |
| 22:05.22 | kergoth | denix: try changing your enterprise.conf to those two lines |
| 22:05.31 | kergoth | denix: see if that fixes it for you |
| 22:06.11 | kergoth | damnit, nevermind, that has another problem |
| 22:06.12 | kergoth | grr |
| 22:06.15 | kergoth | bbmask was always such a hack |
| 22:06.17 | kergoth | so was bbfiles |
| 22:06.21 | kergoth | this crap has got to go |
| 22:06.32 | denix | kergoth: I believe I tried this "(blah)|(blah|blah)" before and it didn't work, I'll double-check |
| 22:06.39 | kergoth | it worked here |
| 22:06.49 | kergoth | it just dies when BBMASK="" or unset before enterprise.conf loads |
| 22:06.54 | kergoth | heh |
| 22:07.10 | *** join/#oe timtimred (n=meh@92-237-114-21.cable.ubr03.chms.blueyonder.co.uk) |
| 22:07.56 | kergoth | hrmph |
| 22:15.08 | CIA-2 | 03Stanislav Brabec <utx@penguin.cz> 07org.openembedded.dev * rb084ea418e 10openembedded.git/ (5 files in 3 dirs): vte: Updated to 0.16.14. Added desktop file. Fixed sub-packages dependencies. |
| 22:15.24 | kergoth | denix: okay, i think i have something that might work... boy is it ugly as hell though.. |
| 22:15.29 | kergoth | denix: :\ |
| 22:15.42 | denix | :) |
| 22:17.51 | kergoth | denix: http://kergoth.pastey.net/109060 |
| 22:18.09 | *** join/#oe jconnolly (n=jconnoll@firebug.buglabs.net) |
| 22:18.17 | kergoth | denix: that works here, tested to confirm that both the user specified mask and the enterprise bits function |
| 22:19.29 | kergoth | should pester zecke, isn't he the one that wrote it? i think he was |
| 22:19.43 | woglinde | kergoth enterprise yes |
| 22:19.54 | woglinde | but he is on the flight to taipeh |
| 22:20.08 | kergoth | ah |
| 22:20.11 | kergoth | well, no rush |
| 22:20.15 | kergoth | he just has a pestering coming is all |
| 22:20.16 | kergoth | :) |
| 22:20.17 | denix | I'd say he broke BBMASK... :) |
| 22:20.22 | kergoth | aye |
| 22:20.47 | denix | depends which feature is more important to someone :) |
| 22:22.00 | denix | no doubt enterprise stuff is useful, it's just I don't use it... |
| 22:24.27 | *** join/#oe dfarnsworth_ (n=dfarnswo@65.200.49.156) |
| 22:25.41 | *** join/#oe Ojg (n=Ojg@c-83-233-228-68.cust.bredband2.com) |
| 22:26.56 | *** join/#oe ant_home (n=andrea@host37-249-dynamic.4-87-r.retail.telecomitalia.it) |
| 22:29.07 | woglinde | hi ant |
| 22:31.46 | CIA-2 | 03Theodore A. Roth <taroth@gmail.com> 07org.openembedded.dev * r53d28637d0 10openembedded.git/docs/usermanual/chapters/getting_oe.xml: getting_oe.xml: Update "Building Software" section. |
| 22:32.09 | *** join/#oe greentux (n=lemke@BAA201c.baa.pppool.de) |
| 22:34.14 | ant_home | woglinde: hello there |
| 22:41.34 | *** join/#oe Noctambulist (n=Sleep@193.179.96.131) |
| 22:42.30 | denix | kergoth: sorry for the delay - had to try different combinations. works perfectly! thanks a lot! |
| 22:42.42 | kergoth | glad to hear it, np |
| 22:42.45 | kergoth | itw as bugging me too :) |
| 22:43.29 | denix | kergoth: will you be commiting it or should we ask zecke? |
| 22:43.44 | kergoth | i'll commit it. ugly as it is, it's better than it was before :P |
| 22:44.23 | *** join/#oe dijenerate (n=dijenera@65.48.155.36) |
| 22:44.56 | denix | ok, thanks. I was getting a feeling nobody cared about this bug - there were absolutely no replies on the ml... :) |
| 22:47.59 | *** join/#oe mnabil_ (n=mnabil@82.201.222.197) |
| 22:48.43 | CIA-2 | 03Michael 'Mickey' Lauer <mickey@vanille-media.de> 07mickey/org.openembedded.dev * r95d534d361 10openembedded.git/conf/distro/ (10 files in 2 dirs): |
| 22:48.43 | CIA-2 | minimal.conf: blatantly steal the collective wisdom (and I admit it must have |
| 22:48.43 | CIA-2 | been ton of work, thanks koen et. al.) people put in the angstrom distribution |
| 22:48.43 | CIA-2 | configuration and reorganize the sections a bit for more clarity. Most of this |
| 22:48.45 | CIA-2 | is really distribution-independent, so I'd welcome if angstrom would include one |
| 22:48.47 | CIA-2 | or the other of these sane-*.inc and maintain it there. |
| 22:53.06 | ant_home | ok, now we have a 'minimal' distro..let cross the finger and start a build |
| 22:56.11 | Crofton|work | I'm curious how minimal it ended up being, guess I need to pull |
| 23:00.06 | BusError | I'd love a minimal.. angstrom with udev and all that takes a couple minutes to boot :/ |
| 23:03.05 | Crofton | BusError, minimal attempts to be a very simple featureless distro |
| 23:03.07 | *** join/#oe jbs_ (n=Bernardo@host25-178-dynamic.51-79-r.retail.telecomitalia.it) |
| 23:10.04 | ant_home | woglinde: is the uclibc build fixed now (was ARM_INSTRUCTION_SET = 'thumb')? |
| 23:14.50 | *** part/#oe Daga (n=Daga@ppp-70-254-38-26.dsl.lgvwtx.swbell.net) |
| 23:17.56 | khem | ant_home: I would rather fix uclibc to be compilable in thumb mode |
| 23:18.19 | khem | We need to get rid of -fno-omit-frame-pointer for one file ldso.c |
| 23:18.29 | khem | and that will make gcc happy |
| 23:18.32 | woglinde | khem the ld.so bug is fixed with gcc-4.4 |
| 23:18.36 | woglinde | I think |
| 23:18.41 | khem | Nope |
| 23:18.47 | woglinde | nope? |
| 23:18.53 | woglinde | did you test it? |
| 23:19.00 | khem | looking at gcc 4.4 changes in this area |
| 23:19.10 | woglinde | it complains about not finding a register |
| 23:19.18 | khem | I did not test but I am fairly certain |
| 23:19.28 | khem | yes |
| 23:19.28 | woglinde | and there some changes on this topic in gcc |
| 23:19.41 | khem | yes there was a patch |
| 23:19.54 | khem | but that does not address the problem we have |
| 23:19.58 | woglinde | hm |
| 23:20.17 | woglinde | khem couldnt you wrote to the uclibc-ml on this topic |
| 23:20.28 | khem | hmm :) |
| 23:20.43 | khem | sure |
| 23:21.01 | khem | people want opts in ldso and at same time wants to keep frame info |
| 23:21.10 | woglinde | hm but -fno-omit-frame-pointer is a simpler solution yes |
| 23:21.29 | khem | for purists yes this should be fixed in gcc |
| 23:21.31 | ant_home | I still don't understand the difformity between various libc |
| 23:21.33 | ant_home | http://thread.gmane.org/gmane.comp.handhelds.openembedded/20414/focus=20416 |
| 23:21.49 | woglinde | okay I going to sleep now |
| 23:21.51 | woglinde | bye all |
| 23:22.02 | ant_home | 'nite wog |
| 23:23.35 | khem | g'night |
| 23:30.15 | *** join/#oe lupine_85 (n=lupine@89-16-178-98.no-reverse-dns-set.bytemark.co.uk) |
| 23:40.10 | ant_home | kergoth: I'm 'happy' you confirm the issues with moving pstage and with -c rebuild...I've noticed it but then nobody had reproduced the issue...present since months ;-) |
| 23:40.29 | *** join/#oe Sleep-Walker (n=Sleep@193.179.96.131) |
| 23:40.55 | kergoth | hehe |
| 23:41.22 | kergoth | hit like 16 bitbake and oe bugs in the past 48 hours.. just lucky, apparently.. |
| 23:41.28 | ant_home | ah, with vacuum-cleaned environment I had problems launching -c menuconfig (Xauth iirc) |
| 23:41.44 | ant_home | I'll retry in a few mins |
| 23:43.39 | khem | kergoth: prepend is same as += ? |
| 23:45.45 | kergoth | += is an append, =+ is a prepend |
| 23:45.49 | kergoth | but they're not the same |
| 23:45.54 | kergoth | append/prepend occur at the end of the parse |
| 23:45.58 | kergoth | += and =+ are immediate |
| 23:46.11 | kergoth | there's also no way to conditionally prepend/append with += and =+, you have to use the others |
| 23:46.32 | khem | right |
| 23:46.45 | khem | I confuse += and =+ |
| 23:46.48 | kergoth | ah |
| 23:47.09 | kergoth | of course, += and =+ use a space seperator |
| 23:47.21 | kergoth | you have to use .= or =. to append/prepend without seperator between the old and new content |
| 23:47.36 | kergoth | mutters under his breath about annoyances with our file format |
| 23:47.43 | khem | hmm nice to know |
| 23:48.06 | kergoth | += and =+ are kind of intended to be word based, hence the spaces. but nobody ever wrote a wordwise -= :) |
| 23:48.32 | khem | heh |
| 23:49.26 | *** join/#oe timtimred (n=meh@92-237-114-21.cable.ubr03.chms.blueyonder.co.uk) |
| 23:53.59 | *** join/#oe greentux (n=lemke@BAA201c.baa.pppool.de) |
| 23:56.26 | *** join/#oe fraxi (n=quassel@p54AA3FF8.dip.t-dialin.net) |
| 23:57.06 | *** join/#oe otavio (n=otavio@debian/developer/otavio) |
| 23:57.41 | *** join/#oe putukas (n=putukas@dsl5402DA80.pool.t-online.hu) |