| 00:51.56 | *** join/#oe wrobbie (n=rob@203.117.215.163) |
| 01:12.19 | *** join/#oe geckosenator (n=sean@c-24-8-193-190.hsd1.co.comcast.net) |
| 01:20.41 | *** join/#oe GunsNRose (n=GunsNRos@222.212.54.217) |
| 01:42.07 | *** join/#oe BenLauDC (n=benlau@221.125.8.105) |
| 02:31.07 | cdbot2 | * * OE Bug 4933 has been created by <OE-Autobuilder> |
| 02:31.09 | cdbot2 | * * opie-mailapplet-1.2.4-autobuild |
| 02:31.11 | cdbot2 | * * http://bugs.openembedded.net/show_bug.cgi?id=4933 |
| 02:32.44 | *** join/#oe vivijim (n=vivijim@unaffiliated/vivijim) |
| 02:37.09 | *** part/#oe vivijim (n=vivijim@unaffiliated/vivijim) |
| 03:13.28 | *** join/#oe Spyro (n=ian@benden.mnementh.co.uk) |
| 03:16.28 | *** part/#oe Spyro (n=ian@benden.mnementh.co.uk) |
| 03:23.59 | *** join/#oe AvengerMoJo (n=AvengerM@61.14.130.209) |
| 03:51.01 | *** join/#oe khem (n=khem@adsl-71-146-25-70.dsl.pltn13.sbcglobal.net) |
| 03:52.34 | *** join/#oe ljp (n=lpotter@218.185.108.156) |
| 04:31.55 | CIA-5 | 03Mike Westerhof <mwester@dls.net> 07org.openembedded.dev * r28700d6c92 10openembedded.git/packages/slugos-init/files/leds: SlugOS: leds - fix the extraneous error message if no beeper correctly. |
| 04:32.05 | CIA-5 | 03Mike Westerhof <mwester@dls.net> 07org.openembedded.dev * r45169babbb 10openembedded.git/packages/slugos-init/slugos-init_5.0.bb: SlugOS: slugos-init - bump PR |
| 04:45.59 | *** join/#oe GunsNRose (n=GunsNRos@222.212.61.235) |
| 04:47.20 | *** join/#oe GunsNRose_ (n=GunsNRos@222.212.62.15) |
| 04:53.18 | *** join/#oe wicknix (n=wicked@32.143.166.190) |
| 05:04.54 | *** join/#oe mithro (n=tim@unaffiliated/mithro) |
| 05:06.25 | *** join/#oe raster (n=raster@r125-63-180-233.cpe.unwired.net.au) |
| 05:12.54 | *** join/#oe iwings (n=chatzill@122.37.63.63) |
| 05:14.49 | *** join/#oe GunsNRose (n=GunsNRos@222.212.49.35) |
| 05:22.01 | *** join/#oe GunsNRose__ (n=GunsNRos@222.212.49.178) |
| 05:39.25 | *** join/#oe AvengerMoJo (n=AvengerM@61.14.130.209) |
| 05:47.27 | *** join/#oe e-ffi_ (n=cybercom@dslb-088-069-035-166.pools.arcor-ip.net) |
| 05:57.59 | *** join/#oe GunsNRose_ (n=GunsNRos@222.212.49.178) |
| 05:59.52 | *** join/#oe Sleep-Walker (n=Sleep@193.179.96.131) |
| 06:13.21 | *** join/#oe GunsNRose__ (n=GunsNRos@222.212.49.178) |
| 06:16.03 | *** join/#oe mrc3_ (n=ddiaz@189.157.115.100) |
| 06:46.23 | *** join/#oe Sup3rkiddo (n=sudharsh@unaffiliated/sudharsh) |
| 06:58.05 | *** join/#oe lpotter (n=ljp@CPE-124-191-144-181.vic.bigpond.net.au) |
| 06:58.39 | *** join/#oe darion76 (n=darion@79.124.130.229) |
| 07:02.25 | *** join/#oe pleemans (n=toi@116.54-246-81.adsl-static.isp.belgacom.be) |
| 07:39.01 | *** join/#oe rob_w (n=bob@p549BE4F9.dip.t-dialin.net) |
| 07:39.42 | *** join/#oe iwings (n=chatzill@122.37.63.63) |
| 07:53.54 | *** join/#oe marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 07:55.01 | *** join/#oe iwings (n=chatzill@122.37.63.63) |
| 08:02.26 | *** join/#oe kwek (n=kwek@188.Red-213-97-48.staticIP.rima-tde.net) |
| 08:07.17 | pb_ | zecke: doh, right |
| 08:19.50 | *** join/#oe cyberdeck (n=mnemonic@iss60.vlsi.informatik.tu-darmstadt.de) |
| 08:20.32 | *** join/#oe Longfield (n=valentin@lsa1pc7.epfl.ch) |
| 08:25.27 | *** join/#oe noglitch (n=Miranda@mail.atmel.fr) |
| 08:28.54 | *** join/#oe iwings_ (n=chatzill@122.37.63.63) |
| 08:57.06 | cdbot2 | * * OE Bug 4934 has been created by <OE-Autobuilder> |
| 08:57.08 | cdbot2 | * * neod-0.1.0+svnr4617-autobuild |
| 08:57.10 | cdbot2 | * * http://bugs.openembedded.net/show_bug.cgi?id=4934 |
| 09:00.00 | *** join/#oe pvanhoof (n=pvanhoof@d54C0C0BA.access.telenet.be) |
| 09:05.46 | *** join/#oe Pr0t0N (n=lcintrat@fe2adsl-2.wyplay.net) |
| 09:11.46 | *** join/#oe jekhor (n=jek@mm-166-254-57-86.leased.line.mgts.by) |
| 09:14.53 | *** join/#oe iwings (n=chatzill@122.37.63.63) |
| 09:32.10 | *** join/#oe tomboy64 (n=tomboy64@e178009153.adsl.alicedsl.de) |
| 09:44.29 | Zta | This is odd... In my site.conf I've written: TMPDIR=${OE_TARGET_ROOT_DIR}/build/${DISTRO} But when I "bitbake base-image" I get ./${OE_TARGET_ROOT_DIR}/build/angstrom/ |
| 09:45.18 | Zta | how come the environment variable isn't expanded? |
| 09:49.08 | *** join/#oe zecke (n=ich@nat/trolltech/x-e236ed2808b26ab2) |
| 09:50.23 | *** join/#oe mithro (n=tim@unaffiliated/mithro) |
| 09:52.34 | *** join/#oe XorA (n=XorA@94-193-93-235.zone7.bethere.co.uk) |
| 09:54.03 | Zta | I'm modifying a setup I've found else where. Here they set TMPDIR=${OE_ENV_ROOT_DIR}/build/${DISTRO} which works. That is: ${OE_ENV_ROOT_DIR} is expanded, and ${OE_TARGET_ROOT_DIR} is not. I don't see why.. |
| 09:54.06 | *** join/#oe Zta (n=stephan@port572.ds1-arc.adsl.cybercity.dk) |
| 10:03.27 | Zta | ah, found it. |
| 10:20.17 | *** join/#oe peterz` (n=peterz@d9244.upc-d.chello.nl) |
| 10:22.28 | *** join/#oe guillaum1 (n=gl@AMontsouris-153-1-20-180.w86-212.abo.wanadoo.fr) |
| 10:32.54 | *** join/#oe stefan_schmidt (n=stefan@c120.apm.etc.tu-bs.de) |
| 10:36.48 | *** join/#oe Ironnads (n=Ironnads@host86-135-218-64.range86-135.btcentralplus.com) |
| 10:50.39 | *** join/#oe florian__ (n=fuchs@217.146.132.69) |
| 10:51.08 | *** join/#oe florian (n=fuchs@217.146.132.69) |
| 10:57.52 | *** join/#oe Jay7 (n=jay@93.81.143.99) |
| 11:14.14 | *** join/#oe rschuster (n=rob@e178097140.adsl.alicedsl.de) |
| 11:21.02 | *** join/#oe peterz (n=peterz@d9244.upc-d.chello.nl) |
| 11:23.21 | *** join/#oe mnabil (n=mnabil@82.201.178.125) |
| 11:29.17 | hrw | morning |
| 11:33.08 | Longfield | hey hrw |
| 11:39.36 | *** join/#oe marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 11:43.31 | florian | good morning |
| 11:46.47 | *** join/#oe mithro (n=tim@unaffiliated/mithro) |
| 11:47.09 | *** join/#oe Blinder (n=othmar@h081217029133.dyn.cm.kabsi.at) |
| 11:47.11 | Blinder | re |
| 11:52.58 | *** join/#oe zecke_ (n=ich@62.70.27.102) |
| 11:53.08 | florian | Blinder: wb |
| 12:25.45 | hrw | ~curse networkmanager |
| 12:25.46 | ibot | May the fleas of a thousand camels infest your most sensitive regions, networkmanager ! |
| 12:25.53 | *** join/#oe Spyro (n=ian@5ace31c4.bb.sky.com) |
| 12:26.04 | *** part/#oe Spyro (n=ian@5ace31c4.bb.sky.com) |
| 12:26.20 | Zta | Are there any bitbake receipes for building xmms2 in OpenEmbedded? |
| 12:33.36 | *** join/#oe ant_work (n=ant_work@host214-85-static.34-85-b.business.telecomitalia.it) |
| 12:38.31 | ant_work | hrw: can you help (c7x0 defconfigs) ? |
| 12:53.09 | *** join/#oe Sup3rkiddo (n=sudharsh@unaffiliated/sudharsh) |
| 12:58.38 | hrw | ? |
| 12:59.27 | ant_work | re |
| 12:59.43 | ant_work | it's about 2.6.26 |
| 12:59.46 | ant_work | http://lists.linuxtogo.org/pipermail/angstrom-distro-devel/2008-December/002815.html |
| 13:01.06 | hrw | why not use 2.6.27? |
| 13:01.24 | Jay7 | ant_work: hi, did you noted my question about tosa patches in last letter to -devel? |
| 13:04.42 | hrw | ant_work: personally I do not care about kexecboot |
| 13:05.35 | hrw | my c7x0 is used only as testing playground and I reflash is each time when need to do something with it. going to kexecboot on it does not give me anything (except more work) |
| 13:06.30 | ant_work | Jay7: thesing and you received the same e-mail |
| 13:06.40 | ant_work | hrw: was about a 'final' consulting |
| 13:06.52 | Jay7 | ah.. ok |
| 13:06.58 | hrw | free to ask anyway |
| 13:07.00 | ant_work | for the 'definitive' 2.6.24 / 2.6.26 defconfig |
| 13:07.14 | *** join/#oe Gnutoo (n=gnutoo@host4-134-dynamic.50-79-r.retail.telecomitalia.it) |
| 13:07.54 | hrw | each person has different value for that term |
| 13:08.04 | ant_work | hrw: I'm dubious about > CONFIG_INPUT_APMPOWER=y |
| 13:08.12 | hrw | no idea what it is |
| 13:08.16 | ant_work | I found out it's a work of RP |
| 13:08.31 | hrw | check patch then |
| 13:09.07 | ant_work | iirc in poky you tested 2.6.26 |
| 13:09.17 | ant_work | remember particular problems? |
| 13:09.36 | hrw | no |
| 13:09.40 | ant_work | you fixed audio iirc |
| 13:09.42 | hrw | I even booted 2.6.27 |
| 13:09.44 | ant_work | he |
| 13:09.55 | hrw | no, I just took someones patch and adapt it to .26 |
| 13:10.16 | ant_work | you see, the defconfig of 2.6.26 IS the same as 2.6.24 |
| 13:10.36 | ant_work | I'm a bit duious about this... |
| 13:10.51 | ant_work | mostly about power management |
| 13:11.58 | ant_work | hrw: straight question: should we concentrate on 2.6.24 or 2.6.26 ? |
| 13:13.54 | hrw | .26 or .27 |
| 13:15.49 | ant_work | ok, thx |
| 13:15.57 | ant_work | (nowI have to convince koen) |
| 13:16.47 | ant_work | hrw: apparently SL-C700 has some mysterious issues...already two reports about kexecboot not working (one from koen) |
| 13:17.40 | ant_work | hrw: perhaps the hardware is too old and rotten |
| 13:17.54 | hrw | ant_work: all Zaurus models are old and rotten |
| 13:18.11 | hrw | but they are hard to replace ;( |
| 13:18.25 | *** join/#oe tomboy64 (n=tomboy64@e178009153.adsl.alicedsl.de) |
| 13:18.48 | hrw | n810 was nice try but lack serial port (which I now use to access my c760) and have closed many parts |
| 13:19.46 | ant_work | hrw: I have yet to find a valid substitute |
| 13:20.16 | ant_work | paired with a good cell-phone, it's yet an usable device |
| 13:20.34 | ant_work | for quick web / mail browsing |
| 13:20.51 | hrw | for such I prefer n810 |
| 13:21.02 | hrw | better screen, internal wifi/bt |
| 13:21.05 | ant_work | battery life... |
| 13:21.09 | hrw | both suxx |
| 13:21.32 | *** join/#oe AvengerMoJo (n=AvengerM@124.126.130.231) |
| 13:21.42 | Jay7 | n810 have solid interface :) |
| 13:21.56 | Jay7 | opie is good thing |
| 13:22.01 | hrw | opie was good |
| 13:22.04 | hrw | 2 years ago |
| 13:22.05 | Jay7 | but lacks of software |
| 13:22.31 | hrw | software, devs, future |
| 13:23.17 | Jay7 | have thinking some time ago about porting hildon to zauruses |
| 13:23.48 | hrw | Jay7: after some work with themes it should work |
| 13:23.58 | Jay7 | but we have too small screen to lose it for hildon's left bar.. |
| 13:24.16 | hrw | Jay7: look at Sato from OpenedHand then |
| 13:24.58 | Jay7 | sato uses same idea? (gtk applications patching) |
| 13:25.21 | hrw | no |
| 13:25.41 | hrw | sato is matchbox-desktop v2, mb-panel v2, own icon theme etc |
| 13:25.52 | hrw | some apps are patched but it is not required |
| 13:26.14 | Jay7 | but apps still have random layout.. |
| 13:26.28 | hrw | sorry - thats common problem |
| 13:26.32 | Jay7 | yep.. |
| 13:27.12 | Jay7 | I can create good layout of desktop with fvwm or something like.. but this can't resolve problem of apps.. |
| 13:27.33 | Jay7 | that was solved in opie/qtopia |
| 13:29.08 | Jay7 | and in maemo partly.. |
| 13:29.35 | Jay7 | -> eat() :) |
| 13:34.08 | hrw | I like ClawsMail on maemo - totally non-maemo look but very nice adapted to small screen |
| 13:36.53 | *** join/#oe jekhor (n=jek@cpmsq.epam.com) |
| 13:37.32 | *** join/#oe jekhor (n=jek@cpmsq.epam.com) |
| 13:41.52 | Jay7 | hm.. |
| 13:42.00 | *** join/#oe Spyro (n=ian@benden.mnementh.co.uk) |
| 13:44.08 | Jay7 | hrw: can you estimate amount of work to port maemo's framework to OE? |
| 13:47.03 | hrw | Jay7: look into poky/branches/experimental/meta-maemo/ and merge it |
| 13:47.11 | Jay7 | hm.. |
| 13:47.15 | hrw | it took me ~week to make it |
| 13:47.18 | Jay7 | hm-hm.. :) |
| 13:47.37 | Jay7 | likes this |
| 13:48.35 | hrw | then take it. give credit where it is needed "(from Poky)" and discuss with Robert Schuster as he maintain 'chinook-compat' distro which is used to build software for Maemo with use of OE |
| 13:50.24 | Jay7 | ok.. there is coming ~10 days Xmas holydays |
| 13:50.37 | Jay7 | I'll try to look into |
| 13:52.21 | *** join/#oe vivijim (n=vivijim@unaffiliated/vivijim) |
| 13:54.31 | *** join/#oe rsalveti (n=salveti@200.184.118.130) |
| 13:58.48 | ant_work | Jay7: don't forget the other projects :-D |
| 13:59.16 | Jay7 | ant_work: kexecboot is the first :) |
| 13:59.26 | ant_work | Jay7: we should bother Dmitry for kernel development on Z's |
| 13:59.53 | Jay7 | but I should resolve my problems with current linux distro :-F |
| 14:00.05 | ant_work | I know he's talking about the maximum systems on pair with RP and Russel King |
| 14:00.25 | ant_work | Jay7: install Gentoo...rebuild time is worth the resules |
| 14:00.55 | Jay7 | ant_work: I won't change distro.. |
| 14:01.01 | Jay7 | this is main problem :) |
| 14:01.46 | Jay7 | at last I can install debian (e.g.) into chroot.. |
| 14:01.57 | Jay7 | or xen :) |
| 14:02.10 | ant_work | I prefer a multiboot machine |
| 14:03.26 | *** join/#oe birunko (n=birunko@200.184.118.130) |
| 14:05.16 | *** join/#oe tomboy64 (n=tomboy64@e178009153.adsl.alicedsl.de) |
| 14:10.40 | ant_work | hrw: looking at the SRC_URI of 2.6.24 and 2.6.26 rp-kernels, I see there are 14 patches less for 2.6.26. All went upstream ? |
| 14:12.07 | hrw | probably |
| 14:14.07 | XorA | hmm, I wonder do we need all these old crappy apt versions with unfetchable sources |
| 14:16.12 | mwester | makes a note to go check that all the SlugOS dependencies are still fetchable; as they're getting a bit old as well. |
| 14:20.41 | *** join/#oe Timelord (n=TL@16.8c.d12c.cidr.airmail.net) |
| 14:21.56 | *** join/#oe HopsNBarley (n=hops@nslu2-linux/HopsNBarley) |
| 14:23.59 | *** join/#oe aloisiojr (n=aloisio@200.184.118.130) |
| 14:25.53 | *** join/#oe chouimat|work (n=dieu@209.217.106.98) |
| 14:32.45 | *** join/#oe Gnutoo (n=gnutoo@host4-134-dynamic.50-79-r.retail.telecomitalia.it) |
| 14:36.52 | *** join/#oe aloisiojr (n=aloisio@200.184.118.130) |
| 14:38.29 | *** join/#oe nslu2-log_ (n=nslu2-lo@limax.nslu2-linux.org) |
| 14:39.11 | *** join/#oe mrc3__ (n=mrc3@nat/ti/x-777f67f682d23c11) |
| 14:39.33 | *** join/#oe Longfield (n=valentin@lsa1pc7.epfl.ch) [NETSPLIT VICTIM] |
| 14:39.33 | *** join/#oe pwgen (n=ew@0132900044.0.fullrate.dk) |
| 14:39.33 | *** join/#oe rsalveti (n=salveti@200.184.118.130) |
| 14:39.33 | *** join/#oe wrobbie (n=rob@203.117.215.163) [NETSPLIT VICTIM] |
| 14:39.35 | *** join/#oe mrc3_ (n=ddiaz@189.157.115.100) [NETSPLIT VICTIM] |
| 14:39.36 | *** join/#oe Gnutoo (n=gnutoo@host4-134-dynamic.50-79-r.retail.telecomitalia.it) |
| 14:39.47 | *** join/#oe cbrake_away (n=cbrake@69.34.21.229) [NETSPLIT VICTIM] |
| 14:39.53 | *** join/#oe dijenerate (n=dijenera@72.22.131.218) |
| 14:40.02 | pwgen | Jay7: zaurus initrd kexec is WORKING !! |
| 14:40.18 | *** join/#oe digital-ex (n=alex@CPE000fb5209bf9-CM00195eefa0c2.cpe.net.cable.rogers.com) [NETSPLIT VICTIM] |
| 14:40.30 | *** join/#oe peterz (n=peterz@d9244.upc-d.chello.nl) [NETSPLIT VICTIM] |
| 14:40.38 | *** join/#oe Crofton (n=balister@66-207-66-26.black.dmt.ntelos.net) |
| 14:40.40 | Jay7 | pwgen: that image which you create instead of pdaxrom's emergency image? |
| 14:40.50 | *** join/#oe lpotter (n=ljp@CPE-124-191-144-181.vic.bigpond.net.au) [NETSPLIT VICTIM] |
| 14:41.46 | *** join/#oe waite (n=bwaite@206.83.81.178.ptr.us.xo.net) |
| 14:42.06 | pwgen | Jay7: yes , i can extract some tar image with /boot/zimage to an sd card instert that card . and with pressong the ok button while per on an nice screen appears wher i can select that image |
| 14:42.26 | pwgen | s/per/power/ |
| 14:42.29 | Jay7 | ant_work: we have new installer :) |
| 14:43.05 | Jay7 | s/new/another/ |
| 14:43.24 | pwgen | and installed that image with d+c pressing ... |
| 14:43.50 | *** join/#oe iwings-home (n=chatzill@122.37.63.63) |
| 14:45.35 | emdete | hi, i build one of my .bb but the binary is for intel, not arm now - why that? did something changed around here recently? |
| 14:45.59 | XorA | yeah we abandoned arm support after getting some intel sponsorship |
| 14:46.36 | emdete | :D |
| 14:48.01 | broonie | Dammn that OH buyout :) |
| 14:50.45 | *** join/#oe kgilmer (n=kgilmer@firebug.buglabs.net) |
| 14:52.34 | emdete | it says TARGET_ARCH = "arm" but if i do a file ... it says ELF 32-bit LSB executable, Intel 80386... any idea? the bb build fine last time i tried - i changed only the bb name from p.bb to p_git.bb but PV is set in the file. any ideas? |
| 14:53.39 | zecke_ | emdete: I'm suprised... there is a check that tests the elf header on files... |
| 14:53.51 | zecke_ | emdete: which package, which binary, which location? |
| 14:54.38 | emdete | zecke_: yes, it seems that's the check that fails: ERROR: QA Issue: Architecture did not match (40 to 3) on /work/armv4t-angstrom-linux-gnueabi/gsm0710muxd-1.6-r6/install/gsm0710muxd/usr/sbin/gsm0710muxd |
| 14:55.07 | emdete | zecke_: its the actual version of the muxer that i wanted to release today... :/ |
| 14:55.23 | *** join/#oe rob_w (n=bill@217.237.177.190) |
| 14:55.53 | emdete | zecke_: but why does it build an i386 anyway? |
| 14:57.23 | ant_work | pwgen: you can hack u-boot setenv bootargs and automatically have kexecboot |
| 14:58.08 | zecke_ | broken makefile? |
| 14:58.13 | *** join/#oe kergoth (n=kergoth@65.200.49.156) |
| 14:58.16 | *** join/#oe geckosen1tor (n=sean@c-24-8-193-190.hsd1.co.comcast.net) |
| 14:58.18 | zecke_ | anyway, off to the airport |
| 14:58.35 | pwgen | <ant_work>, that may be my net plan .. |
| 14:58.50 | pwgen | grpmmf s/net/next/ |
| 14:58.52 | ant_work | Jay7: pwgen has a broken nand and cannot flash on standard address. Otherwise I don't see why having kexecboot in emergency... |
| 14:59.30 | Jay7 | ant_work: we can combine emergency and kexecboot :) |
| 14:59.36 | pwgen | there are a lot more reasons. updateing the kernel will be very easy, |
| 15:00.26 | pwgen | and for example is use on my c-3200 debian, and if i do an update for the kernel i will work directly withou any changes to the nand . |
| 15:01.01 | pwgen | and its smaller then the pdaxrom emergency |
| 15:01.12 | emdete | okay, found it, my problem ... thanks :) |
| 15:01.18 | pwgen | and i can boot emergency from sd . and and and ... |
| 15:01.39 | ant_work | I miss the point... |
| 15:01.52 | ant_work | 2: Emergency 0x00540000 0x00060000 0 3: Kernel 0x00160000 0x005a0000 0 |
| 15:02.39 | ant_work | pwgen: sharp bootloader and u-boot default are doing nand read.logical 0xa0800000 0x005a0000 |
| 15:02.51 | pwgen | i will get rid of the extra kernel partiton .. |
| 15:03.05 | *** join/#oe kergoth_ (n=kergoth@65.200.49.156) |
| 15:03.32 | ant_work | iirc your nand is broken after 0xa005a0000 |
| 15:03.44 | ant_work | and you cannot flash with updater.sh |
| 15:03.49 | ant_work | right ? |
| 15:03.49 | pwgen | 32e000 |
| 15:04.01 | ant_work | ah, ok |
| 15:04.05 | pwgen | i cannont use an jffs2 image . |
| 15:04.37 | pwgen | i had to copy it from some emergecy image |
| 15:05.12 | pwgen | this system is something like an user interacting bootloader |
| 15:05.17 | *** join/#oe rsalveti (n=salveti@200.184.118.130) |
| 15:08.11 | *** join/#oe prpplague (n=dave@mail.americanmicrosystems.com) |
| 15:08.31 | prpplague | hrw: found any clues to the alignment faults and segfaults with the gpe apps? |
| 15:11.21 | RP | zecke_: pong |
| 15:16.39 | hrw | prpplague: sorry - had some other stuff to do. release time |
| 15:17.03 | prpplague | hrw: np, gonna look at it today myself |
| 15:21.10 | pwgen | i someone will test the kexec stuff: look at http://eric-weiss.de/trac/wiki/zaurus |
| 15:26.41 | prpplague | hrw: ping |
| 15:36.24 | hrw | png |
| 15:36.43 | prpplague | hrw: nm, kergoth helped me out |
| 15:37.05 | hrw | ok |
| 15:37.37 | ant_work | prpplague: I saw some alignment faults on armv5te |
| 15:37.55 | ant_work | prpplague: and can confirm gpe-sysinfo is broken |
| 15:38.25 | ant_work | probably segfaults |
| 15:38.42 | prpplague | ant_work: what version of gpe-conf are you using (gpe-info is built part of that) |
| 15:38.42 | pwgen | can someone tell me for what the last number in a row is doing from the updater.pro file |
| 15:39.52 | prpplague | ant_work: i think i'm going to use the openmoko prefered versions for all of GPE right now |
| 15:40.08 | pwgen | U-BOOT ,BIN,0x00000000,320 < what is 320 describing ? |
| 15:40.30 | ant_work | prpplague: I build angstrom from .dev |
| 15:40.42 | ant_work | possibly different ver |
| 15:42.48 | prpplague | ant_work: yea, i'm building from .dev as well |
| 15:43.20 | prpplague | ant_work: 0.2.6 of gpe-conf appears to be what is used for the pref-ver on several other build |
| 15:43.22 | prpplague | builds |
| 15:46.28 | ant_work | prpplague: I'll branch serial and track some logs |
| 15:48.09 | ant_work | pwgen: this '320' is the size |
| 15:48.47 | pwgen | ant_work: in hex i guess |
| 15:48.55 | ant_work | EMERGENC,IMG,0x00060000,5376 - > mtdparts=mtdparts=laze-0:256k(U-Boot)ro,128k(U-BootEnv),5376k(Emergency),1408k(Kernel),-(JFFS2) |
| 15:49.14 | ant_work | (this was the olfd layout, copyand paste ;-)) |
| 15:49.25 | pwgen | ahh 256+126 = 320 |
| 15:49.42 | pwgen | ahh 256+126 = 320 in kilobytes .. |
| 15:49.49 | ant_work | no, now there is anymore a dedicated partition |
| 15:49.54 | ant_work | for u-boot env |
| 15:52.49 | pwgen | kexec,bin,0x005a0000,1400 in updater.pro should install my image in kernelspace , im am right ? |
| 15:54.50 | ant_work | wasn't broken nand? |
| 15:55.45 | pwgen | <ant_work>: i can install the base stuff ( kernel,bootloader ) but when i will install the jffs2 image it fail. |
| 15:57.38 | pwgen | but that's not my target , i will have something like an graphical bootloader, and an very easy way to install |
| 15:58.30 | pwgen | and maybe the posibility to choose another nand layout ( no home/root partition ) |
| 15:59.45 | ant_work | pwgen: build nandlogical and do some experiments. You can flash from console |
| 16:08.03 | *** join/#oe mnabil (n=mnabil@82.201.178.252) |
| 16:10.06 | ant_work | pwgen: in case you missed it http://www.h5.dion.ne.jp/~rimemoon/zaurus/memo_006.htm |
| 16:11.11 | ant_work | indeed your nand is bad at 32e000, where initrd lives |
| 16:12.33 | ant_work | but still IMHO you don't need u-boot necessary then, you can flash the kexec-kernel at 00220000 as ususal |
| 16:12.56 | ant_work | for booting CF / SD |
| 16:13.40 | ant_work | ah..wait..I'm I blind...what was the address? |
| 16:14.31 | pwgen | ahh that will be find , this ( the japaneese link ) that helps me a lot |
| 16:15.02 | *** join/#oe vivijim (n=vivijim@unaffiliated/vivijim) |
| 16:15.11 | pwgen | grmp s/find/fine/ |
| 16:16.41 | *** join/#oe robtow (n=rtow@nat/montavista/x-05ad05f3d240db90) |
| 16:17.48 | pwgen | Bad eraseblock 465 at 0x03a20000 |
| 16:18.43 | ant_work | pwgen: it's at the end of 'normal kernel' space...bad bad |
| 16:19.07 | ant_work | you could try a minimal linux-kexecboot-image, below 1.2 mb |
| 16:19.23 | *** join/#oe bin10101 (n=aars@vpn-211-22.baylor.edu) |
| 16:19.34 | pwgen | thats exactly what i am doing ! ... |
| 16:20.15 | pwgen | my image has a size of 1.4 mb , |
| 16:31.44 | prpplague | ant_work: ping |
| 16:31.47 | pwgen | ant_work: how is the definition of the mtdlayout done , can i change it by kernel bootparams ? |
| 16:33.24 | ant_work | pwgen: it's a bit complicated story...a sane bootloader should pass this parameter |
| 16:34.49 | ant_work | and a modern kernel > 2.6.23 can receive these |
| 16:35.07 | prpplague | ant_work: what kind of device are you testing gpe-info on? |
| 16:35.14 | ant_work | zaurus c7x0 |
| 16:35.27 | *** join/#oe vivijim (n=vivijim@unaffiliated/vivijim) |
| 16:35.31 | pwgen | my idea is tho extend the initrdkexec to read some file with the kernel bootbarams , so i can held the bootconfiguration on some externel device |
| 16:36.14 | ant_work | pwgen: initramfs-kexec-kernel is aware of custom mtdparts (provided by u-boot) |
| 16:36.42 | ant_work | you don't need to specify it in kernel cmdline |
| 16:37.21 | *** join/#oe tharvey (n=tharvey@76.205.222.173) |
| 16:37.24 | prpplague | ant_work: don't suppose you could run gpe-info from a cmdline and tell me what kind of error you get? |
| 16:37.40 | ant_work | yes, np |
| 16:37.50 | ant_work | later |
| 16:44.14 | pwgen | ant_work: ok i will play a bit around with it .. |
| 16:44.24 | ant_work | pwgen: look with attention at the u-boot-git patches for Zaurus in OE |
| 16:44.49 | ant_work | these 'undo' the pdaxrom partitioning |
| 16:45.28 | ant_work | and give right mtdparts to the emergency kernel |
| 16:46.17 | pwgen | this will be a long night for me . ;P |
| 16:46.20 | ant_work | btw..if you happen to write a framebuffer-console for u-boot, well, sweet |
| 16:46.39 | ant_work | :) |
| 16:46.51 | pwgen | *G* that was anoter idea, but an kexec intrd will be a lot more simple |
| 16:47.20 | prpplague | ant_work: looks like there might be a bug in gpe-info that doesn't handle unkown devices properly |
| 16:48.17 | ant_work | gpeinfo was previously working |
| 16:48.37 | ant_work | same hardware ^_^ |
| 16:49.41 | prpplague | ant_work: hmm |
| 16:54.55 | ant_work | prpplague: gpe-info was probably developed on ipaq and zaurus :-) |
| 16:55.36 | prpplague | ant_work: yea |
| 16:55.51 | ant_work | emerge -auD system --newuse |
| 16:55.59 | ant_work | oops..sorry |
| 16:56.20 | ant_work | too many windows... |
| 16:57.51 | *** join/#oe pcgeil (n=steffen@p549E73B9.dip.t-dialin.net) |
| 17:00.23 | prpplague | ant_work: looks like the problem extends beyound gpe-info, several of the mb-panel-applets are segfaulting too |
| 17:00.43 | *** join/#oe pcgeil_ (n=steffen@p549E73B9.dip.t-dialin.net) |
| 17:01.18 | ant_work | prpplague: too bad |
| 17:01.23 | ant_work | some regression |
| 17:01.48 | ant_work | I'll try to find some time for testing gpe during next holidays |
| 17:03.00 | ant_work | actually what I did for the last months was: see if it boots, check if it resumes after suspend, reboot |
| 17:03.03 | ant_work | :-/ |
| 17:03.41 | ant_work | prpplague: btw is there any benchmark for gpe? |
| 17:04.24 | ant_work | with the one in opie I had some strange findings: it seems uclibcgnueabi is 40% faster than glibc |
| 17:04.38 | ant_work | *only for floating point* |
| 17:04.55 | ant_work | read softfloat |
| 17:05.31 | prpplague | ant_work: sorry i do not know, i normally don't do userland stuff, mainly kernel |
| 17:07.41 | ant_work | FWIW gpe-info crashes with both libc |
| 17:09.11 | ant_work | prpplague: are the alignment issue due to miscompilation? |
| 17:09.54 | prpplague | ant_work: that would be my guess, i noticed that the packages i'm having trouble with were compiled with -O2 |
| 17:10.19 | ant_work | you see, I use gcc-4.2.4 |
| 17:16.02 | prpplague | ant_work: i'm using 4.2.4 as well |
| 17:19.05 | *** part/#oe darion76 (n=darion@79.124.130.229) |
| 17:24.51 | hrw | cu guys |
| 17:39.44 | *** join/#oe mnabil_ (n=mnabil@82.201.222.138) |
| 17:46.35 | ant_work | before going, crazy link : http://jerryleecooper.com/ |
| 17:46.37 | ant_work | bbl |
| 17:52.05 | *** join/#oe valhalla (n=valhalla@81-174-21-31.dynamic.ngi.it) |
| 17:52.28 | pwgen | microsoft is giving you money if you use m$ ?? |
| 17:56.06 | shabble__ | sounds like a winning business model to me! |
| 17:58.26 | pwgen | what a crap .. if you use m$ you had to renew every 4 years your complete hardware, because thy cancel the support, add this to your tco and the you will use some AIX or IBM hardware that runs more the the livetime of some crappy m$ gameing plattform |
| 18:04.20 | nik0n | nice |
| 18:04.29 | nik0n | angstrom 2008.1 breaks my rootfs of my new machine :) |
| 18:04.43 | nik0n | using a really old strip down of angstrom 2007 seems to work :~ |
| 18:06.36 | Crofton|work | will PREFERRED_VERSION_linux-davinci = "2.6.25" do what I expect? select linux-davinci_2.6.25? |
| 18:08.06 | mwester | It's supposed to. |
| 18:08.24 | nik0n | Crofton|work: it sould |
| 18:08.42 | Crofton|work | yeah, waiting for a build to finish before I test |
| 18:08.58 | Crofton|work | the _virtual/kernel is involved :) |
| 18:09.41 | mwester | Right, but the PREFERRED_VERSION_* is applied after the virtual is resolved. |
| 18:15.54 | *** join/#oe guillaum1 (n=gl@AMontsouris-153-1-20-180.w86-212.abo.wanadoo.fr) |
| 18:22.11 | *** join/#oe marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 18:29.05 | *** join/#oe pcgeil (n=steffen@p549E73B9.dip.t-dialin.net) |
| 18:39.15 | *** join/#oe rschuster1 (n=rob@e179083087.adsl.alicedsl.de) |
| 18:39.57 | Crofton | ! [rejected] org.openembedded.dev -> org.openembedded.dev (non-fast forward) |
| 18:40.08 | Crofton | any thoughts on why I see this when I try to push? |
| 18:40.25 | broonie | Crofton: You need to merge with the changes other people have pushed. |
| 18:41.10 | broonie | possibly by doing 'git pull --rebase' or 'git rebase' to rebase your changes onto theirs, possibly by merging origin/org.openembedded.dev into your branch. |
| 18:41.52 | Crofton | thanks |
| 18:42.09 | Crofton | I tried git add -i and seem to have got a file in a weord state |
| 18:42.23 | Crofton | # packages/libnfnetlink/libnfnetlink_0.0.39.bb |
| 18:42.26 | Crofton | is unteacked now |
| 18:42.51 | Crofton | I need to remove the git add -i as a "cool way" to make changes .... |
| 18:43.13 | broonie | Or learn how to drive it :) |
| 18:43.20 | Crofton | right |
| 18:43.30 | Crofton | but it shouldn't be i nthe phraseboo the way it is |
| 18:43.37 | broonie | git gui can be helpful there - it's got the pointy clicky going on, and does support -i style commiting. |
| 18:43.37 | Crofton | with 0 instructions |
| 18:44.07 | *** join/#oe udovdh (n=udovdh@pindarots.xs4all.nl) |
| 18:44.10 | Crofton | my go with git add -i seems to have got libnfnetlink in a weird state |
| 18:44.12 | udovdh | hello |
| 18:44.16 | udovdh | question |
| 18:44.19 | Crofton | and trying to check it out again does not help |
| 18:44.41 | udovdh | I just set up my bitbake/oe environment again following the info at http://wiki.navit-project.org/index.php/Navit_on_%C3%85ngstr%C3%B6m |
| 18:45.00 | udovdh | bitbake fails building already at step 6. |
| 18:45.24 | udovdh | whic is shasum-native |
| 18:45.29 | udovdh | which is shasum-native |
| 18:45.41 | udovdh | it can't find stddef.h |
| 18:45.55 | udovdh | and stdarg.h |
| 18:46.07 | udovdh | but they both are in /usr/include/linux |
| 18:46.10 | udovdh | as they have been |
| 18:46.15 | udovdh | what went wrong? |
| 18:46.22 | udovdh | and how can I correct this? |
| 18:47.25 | broonie | Crofton: manually git add it? Or look at the commit in git gui? |
| 18:48.08 | Crofton | udovdh, what distro are you using on the build machine? |
| 18:48.15 | udovdh | fedora 10 |
| 18:48.20 | udovdh | it used to work on fedora 9 |
| 18:48.23 | Crofton | so you think git adding it back will solve the problem? |
| 18:48.30 | udovdh | tahts why I wrote the small howto-ish wiki thing |
| 18:48.48 | broonie | Crofton: Dunno, depends on exactly what you've done. |
| 18:48.48 | Crofton | i think you need to try diabsling CCACHE |
| 18:49.00 | Crofton | try adding CCACHE = "" in local.conf |
| 18:49.21 | udovdh | CCache was coment for me? |
| 18:49.21 | Crofton | broonie, I don't know what I did either :) |
| 18:49.57 | udovdh | CCache is already in local.conf here |
| 18:50.06 | broonie | Crofton: Quite :) adding it back then looking at teh overall effect of the commit might be a good starting point. |
| 18:50.10 | broonie | s/commit/index/ |
| 18:50.45 | Crofton | now git status says it is new, but git diff is empty |
| 18:50.49 | udovdh | bitbake is 1.8.12 if that matters |
| 18:50.56 | Crofton | I need to horse around with it some |
| 18:51.06 | Crofton | udovdh, try CCACHE = "" in local.conf |
| 18:51.18 | udovdh | Crofton, it is alread yin there |
| 18:51.24 | udovdh | Crofton, it is already in there |
| 18:53.30 | Crofton|work | udovdh, I don't know |
| 18:53.40 | Crofton|work | I need to take a break for a bit alsi |
| 18:54.40 | udovdh | conf: http://pastebin.com/dc21065 |
| 18:54.50 | udovdh | hmmm |
| 18:54.59 | udovdh | bitbake 1.8.10 fixes this issue!? |
| 18:55.02 | udovdh | it does more now |
| 18:55.19 | *** part/#oe rschuster1 (n=rob@e179083087.adsl.alicedsl.de) |
| 18:55.48 | broonie | Crofton: git diff will show you changes not in the index by default, you need to diff against your HEAD to see the changes that will be committed (I do recommend gui for visualisation in this sort of situation). |
| 18:56.25 | broonie | Crofton: You might also use 'reset' to forget the index state (*don't* use --hard or you'll be depressed, though). |
| 18:59.32 | kergoth | git diff --cached is what will be committed. git diff HEAD is both what is currently staged int he index for commit, and any additional changes in the working copy that aren't yet in the index |
| 19:03.42 | udovdh | thanks for reading, later... |
| 19:03.45 | *** part/#oe udovdh (n=udovdh@pindarots.xs4all.nl) |
| 19:04.41 | *** join/#oe florian (n=fuchs@g227179005.adsl.alicedsl.de) |
| 19:15.45 | *** join/#oe jekhor (n=jek@mm-166-254-57-86.leased.line.mgts.by) |
| 19:17.36 | *** join/#oe RobotGuy (n=robotguy@pool-96-225-210-142.ptldor.fios.verizon.net) |
| 19:19.26 | *** join/#oe pb_ (n=pb@79-71-242-68.dynamic.dsl.as9105.com) |
| 19:20.44 | *** join/#oe udovdh (n=udovdh@pindarots.xs4all.nl) |
| 19:20.50 | udovdh | while bitbaking I see: |
| 19:20.51 | udovdh | NOTE: Handling BitBake files: \ (2831/4977) [56 %]http://svn.projects.openmoko.org/svnroot/python-openmoko/python-gsmd: (Not a valid URL) |
| 19:20.56 | udovdh | who can fix this? |
| 19:22.33 | *** join/#oe timtimred (n=meh@92-237-114-21.cable.ubr03.chms.blueyonder.co.uk) |
| 19:32.56 | *** join/#oe fille_ (n=fille@a83-245-252-47.elisa-laajakaista.fi) |
| 19:34.41 | piroko | udovdh: What's the problem? |
| 19:35.03 | *** join/#oe polyonymous (i=hacker@pD953864C.dip0.t-ipconnect.de) |
| 19:38.56 | *** join/#oe Sup3rkiddo (n=sudharsh@unaffiliated/sudharsh) |
| 19:42.38 | *** join/#oe dcordes (n=dcordes_@unaffiliated/dcordes) |
| 19:46.11 | khem | udovdh: are ypu using latest git ? |
| 19:46.46 | khem | have a look at package/python/python-gsmd_svn.bb on latest head |
| 19:49.10 | *** join/#oe timtimred (n=meh@92-237-114-21.cable.ubr03.chms.blueyonder.co.uk) |
| 19:51.52 | *** join/#oe Pr0t0N (n=lcintrat@cio13-1-82-233-139-2.fbx.proxad.net) |
| 19:52.52 | *** join/#oe bin1010 (n=aars@rrcs-24-153-239-89.sw.biz.rr.com) |
| 20:04.37 | *** join/#oe bluelightning (n=blueligh@pdpc/supporter/active/bluelightning) |
| 20:06.17 | *** join/#oe kgilmer_ (n=kgilmer@firebug.buglabs.net) |
| 20:15.36 | dcordes | why doesn't autobuilder produce armv6-novp packages? :( |
| 21:00.16 | *** join/#oe robtow1 (n=rtow@63.81.120.151) |
| 21:03.27 | *** join/#oe robtow (n=rtow@63.81.120.151) |
| 21:08.46 | *** join/#oe robtow (n=rtow@63.81.120.151) |
| 21:17.48 | otavio | mickey|zzZZzz: hello; i'm working at a basic lxde set of packages and pcmanfm is one of them. The only user looks to be OM but I doubt it is being used. I've updated it to 0.5 and would like to drop the other versions, any objection? |
| 21:20.47 | *** join/#oe thesing (n=tkunze@BAA7cb3.baa.pppool.de) |
| 21:21.00 | thesing | morning all, |
| 21:21.17 | thesing | is anybody doing ppc builds? |
| 21:22.07 | *** join/#oe dcordes (n=dcordes_@unaffiliated/dcordes) |
| 21:31.05 | *** join/#oe ant_ (n=ant@host252-229-dynamic.58-82-r.retail.telecomitalia.it) |
| 21:40.25 | *** join/#oe kergoth (n=kergoth@65.200.49.156) |
| 21:41.55 | *** join/#oe vivijim (n=vivijim@unaffiliated/vivijim) |
| 21:44.06 | Crofton|work | thesing, I do some ppc405, but I can't test them .... |
| 21:47.25 | *** join/#oe pcgeil (n=steffen@p549E73B9.dip.t-dialin.net) |
| 22:00.05 | cdbot2 | * * OE Bug 4935 has been created by david.hagood(AT)aeroflex.com |
| 22:00.08 | cdbot2 | * * build of flex-native fails |
| 22:00.10 | cdbot2 | * * http://bugs.openembedded.net/show_bug.cgi?id=4935 |
| 22:04.31 | emdete | mickey|zzZZzz: there is a new muxer for you at http://pyneo.org/downloads/ - version 1.6 fixes the coredump at ^C problem you talked about |
| 22:17.13 | *** join/#oe TheCan (n=thecan@94.216.11.167) |
| 22:20.28 | ant_ | thesing: ping |
| 22:20.48 | thesing | ant_: pong |
| 22:21.08 | ant_ | hello, I'm looking at the defconfigs again... |
| 22:21.58 | thesing | Crofton|work: which machine do you use? |
| 22:22.09 | ant_ | did you follow some special criteria doing kexecboot-defconfig for collie? |
| 22:22.39 | thesing | ant_: no. I tried to throw everything possible out. |
| 22:22.56 | ant_ | ok, I was lazy and only disabled networking... |
| 22:23.43 | thesing | if the kernel is small enough thats totally ok. |
| 22:23.47 | Crofton|work | I use xilinx-ml403 |
| 22:25.17 | *** join/#oe kergoth (n=kergoth@ip68-3-163-239.ph.ph.cox.net) |
| 22:25.28 | ant_ | thesing: referring to koen's patch (+echo 'CONFIG_BLK_DEV_INITRD=y |
| 22:25.28 | ant_ | +CONFIG_INITRAMFS_SOURCE="initramfs.cpio.gz"' >> ${S}/.config) |
| 22:25.53 | ant_ | don't you think CONFIG_KEXEC=y |
| 22:25.59 | ant_ | should be forced too? |
| 22:26.09 | thesing | yes it should |
| 22:26.32 | ant_ | (I hate this rewrite of defconfigs done by the recipe) |
| 22:27.01 | thesing | Crofton|work: if you do a clean build some time in the future, could you try if you can build module-init-tools-cross without building perl-native first? |
| 22:30.39 | ant_ | thesing: do you know about power management changes between 2.6.24 and 2.6.26? |
| 22:31.23 | thesing | there were probably some. |
| 22:31.35 | thesing | but for collie I have pm disabled in kexecboot kernel. |
| 22:31.41 | ant_ | I have that minor issue..no recharging if suspended |
| 22:32.05 | thesing | ant_: if you see Jay can you tell him that he can get git access to kexecboot if he wants? |
| 22:32.20 | ant_ | btw I have pm enabled in kexecboot for 2.6.26-c7x0 and suspend/resumes happily |
| 22:32.27 | thesing | ant_: he has to register at linuxtogo and request to join collie project |
| 22:32.41 | ant_ | thesing: seems very good idea |
| 22:33.20 | thesing | ant_: pm is kexecboot has nothing to do with pm in real kernel. Unless you want to suspend in the boot menu. |
| 22:34.13 | ant_ | thesing: all kexecboot kernels I tested have that same issue: the ac-power get disconnected immediatly before scanning |
| 22:34.26 | ant_ | the boot media |
| 22:34.51 | ant_ | kernels < 2.6.24 re-initiate the power-charge |
| 22:34.57 | ant_ | 2.6.26 doesn't |
| 22:35.12 | ant_ | (after kexecboot) |
| 22:35.28 | ant_ | strange... |
| 22:35.38 | ant_ | same defconfig |
| 22:35.57 | ant_ | but different patchset |
| 22:37.45 | ant_ | thesing: btw resuming goes back to console..pressing a key gives back the framebuffer |
| 22:37.50 | thesing | maybe its because of the gpio lib |
| 22:38.28 | ant_ | sorry, I meant <= 2.6.24 |
| 22:40.42 | ant_ | thesing: the only difference I see, 2.6.26 has > CONFIG_INPUT_APMPOWER=y |
| 22:41.34 | thesing | yes but that is only a config change. Under the hood there were probably many changes. |
| 22:41.54 | thesing | the fix is to check for ac at the startup of the pm driver. |
| 22:41.57 | ant_ | yes, 2.6.26 has some 15 patches less |
| 22:42.11 | *** join/#oe raster (n=raster@r125-63-180-233.cpe.unwired.net.au) |
| 22:42.54 | ant_ | thesing: this is the only issue...if you branch AC *before* suspending, all is fine... |
| 22:43.22 | ant_ | dunno on other machines of the Z class |
| 22:49.26 | *** join/#oe HellDragon (n=jd@Wikipedia/HellDragon) |
| 22:49.50 | ant_ | thesing: one last thing...do you want commit tosa-kexecboot or do you prefer that Dmitry does it himself? |
| 22:51.12 | thesing | I don't care. I wanted to do it yesterday, but I didn't find your patch ;) |
| 22:51.22 | ant_ | not mine... |
| 22:51.40 | thesing | the on that dmitry based his on. |
| 22:51.59 | ant_ | ah ok...errors included :-) |
| 22:52.20 | ant_ | please purge that # uncomment... |
| 22:53.18 | thesing | ant_: its best if dmitry commits it if he has time |
| 22:53.53 | ant_ | I'll have to bother him about kernel defconfigs too! |
| 22:54.05 | ant_ | RP is practically absent nowadays |
| 22:55.05 | cdbot2 | * * OE Bug 4936 has been created by david.hagood(AT)aeroflex.com |
| 22:55.08 | cdbot2 | * * Build of openssl-native fails |
| 22:55.10 | cdbot2 | * * http://bugs.openembedded.net/show_bug.cgi?id=4936 |
| 22:57.22 | RP | ant_: practically but not always ;-) |
| 22:59.00 | ant_ | :) |
| 23:00.49 | thesing | RP: are you still maintaining the clamshell kernels or did you pass that to the pxa maintainer? |
| 23:01.25 | RP | thesing: Officially I'm still the maintainer |
| 23:02.24 | thesing | RP: do you plan to resume work on them? |
| 23:02.34 | RP | thesing: I'd very much like to, yes |
| 23:02.35 | ant_ | RP: Dmitry was talking about 2.6.28...how far is it? |
| 23:02.52 | RP | thesing: Hopefully I'll get some time over the holidays to catch up with that |
| 23:03.03 | ant_ | very good |
| 23:03.35 | thesing | RP: what do you think about moving from sharpsl-pm to the power class? |
| 23:04.09 | RP | thesing: Will probably need to be done sooner or later |
| 23:04.32 | *** join/#oe robtow1 (n=rtow@nat/montavista/x-13e0ef867e46894b) |
| 23:05.24 | thesing | good to know. I will use it for collie then. |
| 23:06.28 | ant_ | thesing: RP: and about these messages? |
| 23:06.30 | ant_ | sharpsl-pm sharpsl-pm: Error: AC check failed. |
| 23:06.31 | ant_ | sharpsl-pm sharpsl-pm: Offline Charger: Error occurred. |
| 23:06.31 | ant_ | sharpsl-pm sharpsl-pm: Charging Error! |
| 23:06.50 | ant_ | in linux-rp-2.6.26 |
| 23:07.36 | thesing | ant_: have a look at arch/arm/common/sharpsl_pm.c ;) |
| 23:07.55 | ant_ | well, ok, some missing patch? |
| 23:08.17 | thesing | no some debug messages. |
| 23:10.02 | ant_ | these happen inserting AC-plug when suspended (no recharge, no led) |
| 23:13.06 | cdbot2 | * * OE Bug 4937 has been created by david.hagood(AT)aeroflex.com |
| 23:13.08 | cdbot2 | * * Build of db-native fails |
| 23:13.10 | cdbot2 | * * http://bugs.openembedded.net/show_bug.cgi?id=4937 |
| 23:17.07 | ant_ | thesing: I've seen..smthg goes wrong if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) |
| 23:17.27 | ant_ | dev_err(sharpsl_pm.dev, "Error: AC check failed.\n"); |
| 23:18.08 | *** join/#oe mnabil (n=mnabil@62.135.96.186) |
| 23:18.47 | thesing | so its too cold or too warm. Or the sensor reading is wrong. There hase been some move from zaurus specific drivers to generic drivers for some chips. |
| 23:21.14 | ant_ | how are the readings fine if not suspended then? |
| 23:21.25 | thesing | no idea. |
| 23:21.44 | thesing | if suspended there are no reading. |
| 23:21.47 | thesing | the cpu sleeps. |
| 23:22.05 | RP | When suspended and charging it periodically wakes up |
| 23:22.18 | ant_ | remember, it's a 2.6.26 only problem... |
| 23:22.39 | RP | I'd suspect all the corgi_ssp changes :( |
| 23:23.01 | ant_ | on OESF there are reports of Zaurus in berzerk mode, auto-activating in the night ... |
| 23:26.03 | ant_ | seriously, the reset done by pulling the battery out reset the device to a state where the insertion of the AC plug is recognized |
| 23:26.20 | ant_ | same happens with linux-rp-2.6.23 and 24 kernels |
| 23:27.38 | ant_ | so possibly is a GPIO thing |
| 23:27.45 | RP | possibly |
| 23:28.28 | *** join/#oe lpotter_ (n=ljp@CPE-124-191-144-181.vic.bigpond.net.au) |
| 23:33.17 | *** join/#oe Spyro1 (n=ian@benden.mnementh.co.uk) |
| 23:39.03 | thesing | night all |
| 23:47.31 | CIA-5 | 03Khem Raj <raj.khem@gmail.com> 07org.openembedded.dev * r8cb93959b7 10openembedded.git/ (2 files in 2 dirs): |
| 23:47.31 | CIA-5 | sane-srcrevs.inc: Move sane srcrev for eglibc out of here. |
| 23:47.31 | CIA-5 | eglibc_svn.bb: Move sane srcrev for eglibc to here. |
| 23:50.47 | CIA-5 | 03Khem Raj <raj.khem@gmail.com> 07org.openembedded.dev * r55ba8c22a8 10openembedded.git/packages/images/native-sdk-console-image.bb: |
| 23:50.47 | CIA-5 | native-sdk-console-image.bb: Add new. |
| 23:50.47 | CIA-5 | * This target includes console image plus everything thats needed to test |
| 23:50.47 | CIA-5 | the toolchain on the target. |
| 23:50.48 | RP | khem: Why move the srcrev to there? |
| 23:53.36 | khem | RP: I playa lot with bleeding libc and every time I change it it forces bb parse |
| 23:53.50 | khem | which is sort of annoying |
| 23:54.11 | RP | khem: so change it locally, not globally :/ |
| 23:55.08 | khem | Dont you think its more accessible if it is in recipe |
| 23:55.10 | RP | khem: any value set in the file will override the conf/inc file |
| 23:56.10 | khem | RP: yes but once its in the recipe then why do we need the global conf/inc one |
| 23:56.58 | RP | The point being distros can select their versions |
| 23:57.42 | khem | is sane-srcrev unique for distros ? |
| 23:58.33 | RP | distros are allowed to override it |
| 23:59.33 | *** join/#oe robtow (n=rtow@nat/montavista/x-6ce4c4d0051e6c6f) |