IRC log for #oe on 20080316

00:03.09*** join/#oe Khem_ (n=khem@adsl-71-146-43-252.dsl.pltn13.sbcglobal.net)
00:03.39Khem_RP: there was a patch for gcc 3.3.x for softfloat prolly OE does not have it ?
00:04.56Khem_mwester: libgcc_s.so should be listed in DT_NEEDED section do we process that to determine run time dependencies ?
00:06.08RPKhem_: gcc 3.3.x in OE is in a bad way, I'm attempting to throw away its strange custom .bb files and make it use the standard templates...
00:06.24RPKhem_: I've just put the build into hardfloat mode for testing purposes
00:07.27Jin|awaynite everyone
00:07.34RP'night Jin|away
00:07.45mrdatahaventnight Jin|away
00:08.59Khem_mrdata: night Jin|away
00:09.02Khem_RP: OK
00:13.20*** join/#oe rschuste1 (n=rob@brln-4db98b09.pool.einsundeins.de)
00:16.58VoodooZmwester: it seems my build fails now with: git: command not found...  Is this a new requirement?
00:17.04cdbot2* * OE Bug 4081 has been created by raj.khem(AT)gmail.com
00:17.06cdbot2* * iptables_1.3.8 fails to compile on eglibc cvs
00:17.08cdbot2* * http://bugs.openembedded.net/show_bug.cgi?id=4081
00:17.22RPVoodooZ: It should get that by building git-native if needed
00:17.54*** join/#oe rschuste2 (n=rob@e179078007.adsl.alicedsl.de)
00:31.47mrdatanight all
00:32.41flo_lapgood night
00:34.04VoodooZRP: I see. I did yum install git on my machine to see if it helps...
00:44.09*** join/#oe osas (n=nnnnnnnn@nslu2-linux/osas)
00:52.01CIA-3903rpurdie 07org.oe.dev * rb95de2cd... 10/ (3 files in 2 dirs): gcc-package: Remove some unused variables and pointless comments
00:52.01CIA-3903rpurdie 07org.oe.dev * r8fb4dfc6... 10/ (56 files in 2 dirs):
00:52.01CIA-39gcc: Move old style gcc*build*.inc includes into
00:52.01CIA-39gcc-configure-{target|cross|sdk} and a common include file. Factor some common
00:52.01CIA-39data not related to configure into gcc-common.inc. Rewrite 3.3.3 and 3.3.4
00:52.05CIA-39recipes to use standard includes (tested and they work).
00:52.07CIA-3903rpurdie 07org.oe.dev * rbd3f1f45... 10/ (3 files in 2 dirs): gcc-cross.inc: Merge in gcc-paths-cross.inc
00:52.10CIA-3903rpurdie 07org.oe.dev * r535aa20b... 10/ (5 files in 2 dirs): gcc-4.x.inc: Set DEPENDS consistently
00:52.14CIA-3903rpurdie 07org.oe.dev * r1dd1336b... 10/ (5 files in 2 dirs): gcc-cross-kernel: Create common .inc file
01:00.24RP'night all
01:00.45*** join/#oe benla1 (n=benlau@221.125.8.105)
01:32.04*** join/#oe wrobbie (n=rob@cm38.kappa85.maxonline.com.sg)
01:41.45VoodooZmwester: Ok. reproduced the crash on a slugos-4.9beta bin I had lying around (the only load I have until my build completes)...
01:41.57VoodooZhere's the error and setup details: http://pastebin.ca/944374
01:42.40VoodooZnote that the crash happens only when the slug is sending data out but not the other way around...
01:43.46VoodooZoops. PM me or reply in #nslu2-linux channel as it's a bit OT..
01:59.47rwhitbyVoodooZ: weird.
02:02.34*** join/#oe mickey|bossa (n=mickey@189.44.51.122)
02:06.00*** join/#oe greentux_ (n=lemke@Z47b4.z.pppool.de)
02:07.16*** join/#oe drmikecrowe (n=drmikecr@208.104.23.34)
02:10.10mwesterERROR: Could not include required file gcc-cross-kernel.inc while parsing /stuff/slug/slugos/openembedded/packages/gcc/gcc-cross-kernel-3.3.3_3.3.3.bb
02:10.11mwesterOuch.
02:12.08*** join/#oe steliosk (n=Stelios@athedsl-14339.home.otenet.gr)
02:19.05cdbot2* * OE Bug 4082 has been created by <OE-Autobuilder>
02:19.07cdbot2* * ipkg-0.99.163-autobuild
02:19.09cdbot2* * http://bugs.openembedded.net/show_bug.cgi?id=4082
02:36.26*** join/#oe HellDragon (i=jd@unaffiliated/helldragon)
02:37.22*** join/#oe summatusmentis (n=summatus@72.168.202.219)
02:44.54*** join/#oe scruggs (n=chris@72-161-98-68.dyn.centurytel.net)
02:54.11khemmwester: :)
02:54.20mwesterBut I have a VMware image on my company laptop with a copy of my tmp directory, so I'll have that back in a half hour or so.
02:54.27khemmwester: I can create a patch while RP  is asleep :)
02:54.42mwesterIf you know what RP intended, that would work too.
02:55.01khemmwester: Lets see I am also seeing this
02:55.30khemmwester: I have machine selected as qemuarm but it did not build host package qemu
02:56.07mwesterI'm just trying to build SlugOS, and it can't parse the packages.
03:06.31CIA-3903khem 07org.oe.dev * r0a460b5f... 10/ (3 files in 3 dirs):
03:06.32CIA-39Bump the eglibc sane revision.
03:06.32CIA-39Use glibc-stage.inc in eglibc recipes.
03:07.05khemmwester: Hmm here is problem he forgot to mtn add the new file and me doing it will be doin same RP has in his sandbox
03:07.22khemmwester: did he post his patch somewhere ?
03:07.34mwesterThat's what I was afraid of.   I didn't see his patches posted.
03:08.09khemmwester: So lets wait for him to wake up :) meanwhile you can do this inside packages/gcc
03:08.20mwesterNow, I will note that *IF WE HAD A REAL SCM TOOL* then his changes might all be on a branch and we could merge them over...
03:08.24khemtouch gcc-cross-kernel.inc
03:08.58mwesterThat'll let them parse, 'tis true.  But doesn't qemu need one of those gcc recipes?
03:09.21khemmwester: hmmmm :( you are right
03:09.49mwesterYeah, I think I'll be ok with SlugOS, but...
03:10.19khemmwester: I am using qemu :(
03:10.42khemI wonder why I dont have a qemu image
03:10.51khemeven before RPs commit
03:11.25khemI think I have to bitbake it separately
03:11.36hillctGood evening all
03:11.37khemits not part of x11-image hmm
03:12.41hillctIs there a place I can store an SVN cert fingerprint for a cert that is being rejected, so I can checkout source via a recipe?
03:13.02hillctcurrently my recipe fails due to a certificate it doesn't like
03:17.11khemhillct: see conf/checksum.ini
03:17.22khemhillct: I am not so sure if that will help
03:17.31hillctchecking
03:18.16khemmwester: gcc-3.4.4 built ok with empty  gcc-cross-kernel.inc ;)
03:19.19mwesterhehe!  Guess whatever is in there isn't so important!
03:19.35mwesterI'll go create that file and launch a full build then.  :)
03:20.19khemmwester: so far it looks so . I will knoww soon if qemu works or not
03:21.14hillctkhem: it's aparent from the content of checksums.ini, how individual file checksums can be added, but it doesn't seem to have a facility to deal with SVN certificate fingerprints
03:21.32khemi thought so
03:22.45hillcthmm
03:22.56hillctthere's got to be a way to do this...
03:23.04cdbot2* * OE Bug 4044 has been RESOLVED (FIXED) by xjqian(AT)gmail.com
03:23.06cdbot2* * wlan-ng-modules-0.2.1-pre26-autobuild
03:23.08cdbot2* * http://bugs.openembedded.org/show_bug.cgi?id=4044
03:23.22hillctalso, when I switch proto=https to proto=http, the checkout fails with no clear error
03:23.32hillctis proto=http valid?
03:25.06mickey|bossaya
03:25.19mickey|bossabut some sites only offer https
03:25.42hillctI confirmed that the site itself supports http
03:25.56hillctI guess some people would make that mistake :)
03:26.19hillctwell
03:26.23hillctactually
03:26.40hillctthe site supports http, but possibly not propfind via http
03:26.57hillctchecking
03:27.04cdbot2* * OE Bug 4052 has been RESOLVED (FIXED) by xjqian(AT)gmail.com
03:27.06cdbot2* * wlan-ng-modules-0.2.8+svn20071030-autobuild
03:27.08cdbot2* * http://bugs.openembedded.org/show_bug.cgi?id=4052
03:28.22khemmwester: Could not initialize SDL - exiting :(
03:28.34khemmwester: Though it built
03:29.05cdbot2* * OE Bug 4073 has been REOPENED by xjqian(AT)gmail.com
03:29.07cdbot2* * altboot-console-image-1.0-autobuild
03:29.09cdbot2* * http://bugs.openembedded.org/show_bug.cgi?id=4073
03:30.01CIA-3903xjqian 07org.oe.dev * r0551f2ee... 10/ (7 files in 2 dirs):
03:30.01CIA-39wlan-ng: close oebug 4044, oebug 4052
03:30.01CIA-39* oebug 4044: add RPROVIDES = wlan-ng-modules, prevent dependency on old 0.2.1-pre26
03:30.01CIA-39* oebug 4052: 0.2.8 svn bump to 20080315 to be compatible with 2.6.24 kernel
03:30.01CIA-39* clean up 0.2.1-pre26
03:37.11*** join/#oe ibot (i=ibot@pdpc/supporter/active/TimRiker/bot/apt)
03:37.11*** topic/#oe is OpenEmbedded Developer Lounge | Web: http://www.openembedded.org | Bugtracker: http://bugs.openembedded.org | Repository: monotone.openembedded.org | This is not a distro support channel
03:39.08VoodooZmwester, rwhitby: Same thing  with refresh build: http://pastebin.ca/944487 :(
03:39.53hillctkhem: aparently the guy with access over there isn't around. In any case, is it possible to add a new CA to the OE list of recognized CAs?
03:40.02VoodooZlet me know if you can think of anything as I'm tight for time and might have to use a portable instead... (power-suckers)
03:40.28VoodooZsorry. wrong channel.
04:02.26*** join/#oe jh-akita (n=jh-akita@ip70-176-147-193.ph.ph.cox.net)
04:48.11Darkrift2how do i remvoe a package i built? im wanting to try an older version of freetype because newer one is giving problems... newer one is built, and if i build older one, im guessing it will still use the newest one, so i want to remove that to force it to use the old one
04:59.42rwhitbyipkg remove on the target, or bitbake -c clean on the compilation host - depending on what your question really is
05:03.12Darkrift2ok, fontconfig-native was failing because of freetype
05:03.18Darkrift2so i was going to try an older freetype
05:03.28Darkrift2and wanted to remove the already built newest freetype
05:03.43Darkrift2and then build the older one and try to build fontconfig-native again and see if it worked
05:03.48*** join/#oe slapin_nb (n=slapin@saris-243.ip.PeterStar.net)
05:03.52Darkrift2i think i worked it out though
05:04.19Darkrift2i build the older one and somehow fontconfig-native worked
05:22.19*** join/#oe cyrus__ (n=cyrus@c-24-20-125-119.hsd1.mn.comcast.net)
05:22.44cyrus__is Richard Purdie around? Just wondering what is the package name I used to build your kernel used for the hx2000 port?
05:31.16cyrus__http://pastebin.com/m3cebe4e9 - can someone look at that. I did a bitbake linux-rp and it says no default configuration available
05:32.29*** join/#oe hvontres|home (n=hvontres@adsl-75-22-170-77.dsl.sndg02.sbcglobal.net)
05:45.14*** join/#oe summatusmentis (n=summatus@72.168.202.219)
05:52.41*** join/#oe ts____gin (n=gints@62.84.15.211)
05:54.04cdbot2* * OE Bug 4083 has been created by <OE-Autobuilder>
05:54.06cdbot2* * openmoko-messages2-0.1.0+svnr3868-autobuild
05:54.08cdbot2* * http://bugs.openembedded.net/show_bug.cgi?id=4083
06:10.37*** join/#oe summatusmentis (n=summatus@72.168.202.219)
06:19.41CIA-3903xjqian 07org.oe.dev * r03964808... 10/ (1 packages/setserial/setserial_2.17.bb): setserial: add DESCRIPTION, HOMEPAGE, AUTHOR. fix packaging
06:24.40*** join/#oe daurnimator (i=daurn@unaffiliated/daurnimator)
06:32.33*** join/#oe AvengerMoJo (n=alex@219.142.242.98)
06:42.50*** join/#oe treitmay1 (n=treitmay@85-127-248-137.dynamic.xdsl-line.inode.at)
06:54.22CIA-3903xjqian 07org.oe.dev * r1b6b8412... 10/ (7 files in 2 dirs): openvpn: unify.
07:06.00Darkrift2As far as i can tell, there has gotta be a setting somewhere that says "if no version for package XXX specified, use version X.X by default"
07:06.09Darkrift2anyone know where/what does this?
07:13.25*** join/#oe davygravy (n=davygrav@h75-100-82-161.75-100.unk.tds.net)
07:20.39*** join/#oe polyonymous_ (n=hacker@pD95399A6.dip0.t-ipconnect.de)
07:29.07*** join/#oe benla1 (n=benlau@221.125.8.105)
07:32.59*** join/#oe treitmayr (n=treitmay@85-127-14-119.dynamic.xdsl-line.inode.at)
07:40.30*** join/#oe chouimat (n=dieu@r2351064.cidc.net)
07:54.25*** join/#oe Dodji (n=dodji@torimasen.com)
08:05.19CIA-3903xjqian 07org.oe.dev * r130abdbe... 10/ (7 files in 3 dirs):
08:05.20CIA-39vpnc: add 0.5.1, unify
08:05.20CIA-39* 0.5.1: patch makeman.pl which calls crosscompiled vpnc binary
08:05.20CIA-39* verified vpnc-script.patch (0.3.3) has been fixed upstream in 0.5.1
08:14.03cdbot2* * OE Bug 3670 has been RESOLVED (FIXED) by xjqian(AT)gmail.com
08:14.05cdbot2* * new package gpsdrive 2.10pre4
08:14.07cdbot2* * http://bugs.openembedded.org/show_bug.cgi?id=3670
08:16.23*** join/#oe treitmayr (n=treitmay@85-127-82-125.dynamic-lac.adsl-line.inode.at)
08:19.04cdbot2* * OE Bug 3448 has been RESOLVED (WONTFIX) by xjqian(AT)gmail.com
08:19.06cdbot2* * Mplayer lacks Real Video support
08:19.08cdbot2* * http://bugs.openembedded.org/show_bug.cgi?id=3448
08:21.23*** join/#oe treitmayr (n=treitmay@85.127.251.240)
08:25.04cdbot2* * OE Bug 1897 has been RESOLVED (FIXED) by xjqian(AT)gmail.com
08:25.06cdbot2* * ffmpeg fails do_compile
08:25.09cdbot2* * http://bugs.openembedded.org/show_bug.cgi?id=1897
08:33.23*** join/#oe treitmayr (n=treitmay@85.127.90.66)
08:35.36*** join/#oe ssvb (n=user@87.252.225.64)
08:39.12*** join/#oe zap (n=zap@28.169.249.ozerki.net)
08:39.53rwhitbyRP: Could not include required file gcc-cross-kernel.inc while parsing /home/slug/slugos/openembedded/packages/gcc/gcc-cross-kernel-3.4.4_csl-arm-2005q3.bb
08:42.16*** join/#oe Sup3rkiddo (n=sudharsh@unaffiliated/sudharsh)
08:46.04cdbot2* * OE Bug 2798 has been RESOLVED (WORKSFORME) by raj.khem(AT)gmail.com
08:46.06cdbot2* * machine qemuarm ext2 image
08:46.08cdbot2* * http://bugs.openembedded.org/show_bug.cgi?id=2798
08:54.45CIA-3903hrw 07org.oe.dev * r20df2e07... 10/ (5 files in 3 dirs): gnome-vfs: added 2.22.0 - partially close #4061
08:55.44*** join/#oe steliosk (n=Stelios@athedsl-14339.home.otenet.gr)
08:58.15*** join/#oe gremlin[it] (n=gremlin@ppp-141-42.25-151.libero.it)
09:02.05*** join/#oe Bernardo (n=Bernardo@89-180-71-40.net.novis.pt)
09:13.04cdbot2* * OE Bug 3698 has been RESOLVED (INVALID) by xjqian(AT)gmail.com
09:13.06cdbot2* * Test
09:13.08cdbot2* * http://bugs.openembedded.org/show_bug.cgi?id=3698
09:41.37*** join/#oe treitmay1 (n=treitmay@85-127-18-28.dynamic.xdsl-line.inode.at)
09:44.30*** join/#oe |miska| (i=miska@atrey.karlin.mff.cuni.cz)
09:52.59*** join/#oe treitmayr (n=treitmay@85-127-80-11.dynamic-lac.adsl-line.inode.at)
09:54.22RPrwhitby, mwester, khem: Missing file checked in, sorry about that
09:54.47khemRP ok, cool we were waiting for u to wake up :)
09:55.28khemRP: btw I succeeding in building a complete x11-image with angstrom2008( clean )
09:55.43khemRP: with patches to couple of apps
09:55.50khemwhich I have posted
09:56.02RPkhem: Great :)
09:56.07khemRP: However I am having a problem which you can help me
09:56.16khemRP: so sysroot works !!!
09:56.50khemRP: I am now able to boot the system (qemuarm) but the xcaliberate screen does not accept my inputs
09:57.31RPkhem: Which qemu binary are you using and which qemu commandline?
09:57.32khemRP: I had this problem before but then I switched back to use xorg-xserver-kdrive-1.3.0.0 and it was working
09:58.01RPSpecicifcally are you adding a wacom usb tablet?
09:58.03khemRP: my qemu invocation is same or similar to poky
09:58.15rwhitbyRP: thx for the fix
09:58.16khemRP: yes I think it is there let me check again
10:00.16khemRP: I have -usb -usbdevice wacom-tablet
10:00.44RPkhem: and you're sure its not kdrive 1.4?
10:00.58khemqemu binary is same that worked before
10:01.01RPhas heard a lot of rumours about 1.4 :/
10:01.11khemRP: Yes I have 1.3
10:01.55CIA-3903rpurdie 07org.oe.dev * r7a325711... 10/ (1 packages/gcc/gcc-cross-kernel.inc): gcc: Add missing file
10:03.09RPkhem: ok, first thing to check is whether /dev/input/touchscreen0 exists, if so, run "od" against it and see if you get numbers when you touch the screen
10:04.02RPkhem: If that worked, install the ts-tests package from tslib and see what ts_print shows, checking the value of the TSLIB_TSDEVICE environment variable to make sure its reading the right device
10:06.36khemRP: I have made note of your suggestions  I will do it first thing tomorrow morning. Right now I deleted the whole tree and doing a complete rebuild once again
10:06.58RPkhem: ok
10:08.01khemgood night all
10:08.13RPkhem: 'night!
10:09.57khemRP: Latest qemu-native package I built today was giving me SDL errors could it be related to the patch you just committed ? I had an empty file so that bitbake does not barf
10:12.33khemRP: If there is no PREFFERRED_VERSION_package defined and package has many versions which one is picked and how is it decided ?
10:18.13RPkhem: no, it doesn't use gcc-cross-kernel
10:18.35khemyeah thought so
10:19.01khemit does need 3.4 gcc but on host
10:19.14RPkhem: http://pokylinux.org/doc/poky-handbook.html look for preferred_version ;-)
10:20.05khemRP: thanks now I can rest in peace :))
10:21.34*** join/#oe rob_w (n=bob@Mb2fc.m.pppool.de)
10:25.27khemRP: So it is determined by PREFERRED_VERSION if it is there if thats not set then it will look for DEFAULT_PREFERENCE. What happens if both these variables are not set ?
10:25.58RPkhem: reciepes have a default preference of 0 and their versions are compared, highest version wins
10:26.47khemRP: OK that fits in the missing piece of my puzzle :)
10:27.08kheme.g. gnome 2.22 will be chosed over gnome 2.20
10:27.11khemin such case
10:29.46RPyes, assuming no version sets a default_preference
10:30.11khemRP: so it is important to name the recipes something like package_<version>.bb
10:35.01pb__khem: it's important for the packages to get their versions set correctly.  the filename is one way of doing that, though it's not the only one.
10:35.52pb__(see PV in bitbake.conf)
10:36.09khempb_: yes true. PV should be the preferred method though
10:36.35khembut many of packages do not have PV set
10:37.02pb__really?
10:37.32pb__almost all packages should have PV set to something, even if they're just accepting the defaults.
10:38.00pb__I'm not sure it's even possible to build a package if PV is completely unset.
10:38.04*** join/#oe pH5 (n=ph5@p5485CBA9.dip.t-dialin.net)
10:38.10CIA-3903Laibsch 07org.oe.dev * r219fa448... 10/ (1 classes/seppuku.bbclass): seppuku: have the name of the MACHINE in the attachment's description (as discussed on the ml)
10:40.32XorA|goneLaibsch: hola
10:40.35RPkhem: Yes, naming of the .bb files is important since thats where PN and PV come from by default. As pb_ said, its not the only way to set the version though, just the default
10:40.43khempb__: I was looking at gnome
10:40.58khemmay be thats the only one missing PV
10:41.09pb__khem: which packages specifically?
10:41.22khemgnome-vfs
10:41.23pb__you have to try pretty hard to unset PV, it's not the kind of thing you would do accidentally
10:42.16pb__gnome-vfs looks like it should get PV set just fine.  it doesn't do anything unusual that I can see so the version will come from the filename.
10:42.43pb__what is the actual problem that you are seeing?
10:42.49Laibschgood morning, XorA|gone
10:42.54Laibschgood morning everyone
10:43.00XorA|goneLaibsch: did you get my email?
10:43.03LaibschXorA|gone: already in .tw?
10:43.10LaibschXorA|gone: yes, don't worry
10:43.16Laibschthis is not time-critical
10:43.21Laibschthanks for the heads-up
10:43.39khempb__: no problem I am trying to understand the procedure
10:43.45XorA|goneLaibsch: cool, just checking that you remail address was real and just a clever anti spam option :-)
10:44.10khempb__: where is PV set for gnome-vfs ?
10:44.37pb__<pb__> (see PV in bitbake.conf)
10:44.37LaibschXorA|gone: it is both, real *and* a clever anti-spam option ;-)
10:45.15khempb__: hmmm :) ok
10:46.01*** join/#oe steliosk (n=Stelios@athedsl-14339.home.otenet.gr)
10:46.39khempb__: somehow I always thought bitbake knew nothing about packages but then ofcourse it has the conf files to feed that info into it
10:49.00pb__right
10:49.09pb__the main bitbake.conf contains a fair amount of the package related logic
10:52.07khempb__: so this complex python expression is reading it from the bb files I think
10:54.44pb__khem: PV = "${@bb.parse.BBHandler.vars_from_file(bb.data.getVar('FILE',d),d)[1] or '1.0'}"
10:54.47XorA|goneLaibsch: I leave at 4am tomorrow morning for .tw
10:55.09Laibschhave a safe and pleasant trip, XorA|gone
10:55.15pb__khem: so, that means: take the filename, split it into fragments separated by "_", and use the second one as the version number.
10:55.18XorA|goneLaibsch: cheers
10:55.31pb__khem: if there isn't a second fragment, use the default version of "1.0"
10:55.45LaibschXorA|gone: 4am sucks big time, though
10:57.27*** join/#oe SyNko (n=SyNko@host9-205-dynamic.15-87-r.retail.telecomitalia.it)
10:57.35khempb__: OK so thats was the file name parsing logic. I had doubt about if I have two versions and nothing was specified which one will be chosen? this logic will calculate PV for each recipe which one is chosen at the end ? I was not clear about that
10:57.42*** part/#oe SyNko (n=SyNko@host9-205-dynamic.15-87-r.retail.telecomitalia.it)
10:58.06pb__khem: as rp said earlier, it will use the higher-numbered one in absence of any other constraint
10:58.08khempb__: e.g I have a_1.2.bb and a_1.3.bb which one is chosen ?
10:58.30pb__1.3
10:58.31khemexactly that was the missing info what RP clarified
10:59.06XorA|goneLaibsch: beats sitting in Heathrow for 9 hours
10:59.47khemso the order is PREFERRED_VERSION otherwise DEFAULT_PREFERENCE otherwise higher version
11:00.19khempb__: thanks for explaining it all
11:00.32khemshould really go to sleep now
11:09.40*** join/#oe swc|666 (n=no@24.143.67.18)
11:11.20swc|666quick question.. would their be any pitfalls to running swap memory on an HTC Universal running angstrom or would it be a benefit?
11:13.43*** join/#oe B_Lizzard (n=havoc@ppp31-50dynamic.athens.acn.gr)
11:22.24*** join/#oe memeruiz (n=memeruiz@e180245044.adsl.alicedsl.de)
11:24.53*** join/#oe jbs (n=Bernardo@89-180-180-108.net.novis.pt)
11:25.19RPswc|666: It depends what you're doing. swap it slow and the system would be slow if it hits swap
11:26.14B_LizzardHello
11:26.23RPhi B_Lizzard
11:26.31B_LizzardDoes anyone have any experience with checking out kernel sources from git?
11:26.41B_LizzardI'm having a bit of a problem
11:27.10swc|666hmm
11:28.43B_LizzardI check the sources out with SRC_URI = "git://jlime.org/jlime-stable.git;protocol=git;branch=v2.6.24-stable" but it makes a bare directory
11:28.57B_LizzardNot an actual directory tree containing the sources
11:29.46*** join/#oe swc666 (n=no@24.143.67.18)
11:30.08B_Lizzard(a directory containing files like HEAD, description, config)
11:36.49RPB_Lizzard: What did you set SRCREV too?
11:37.17B_Lizzardhmmm
11:37.20B_Lizzardno
11:37.59RPTry SRCREV = "${AUTOREV}"
11:41.08B_LizzardThanks, dude
11:42.30B_LizzardAh, same thing
11:42.41B_LizzardI'm guessing this is standard behaviour
11:42.53B_LizzardAnd that it does a checkout later
11:42.57B_Lizzardautomatically
11:43.30RPIt depends which directory you're talking about
11:44.10*** join/#oe dcordes (n=snoopdog@unaffiliated/dcordes)
11:44.21B_Lizzardit makes a jlime.org.jlime-stable.git dir and then a .git dir under that
11:44.31B_LizzardWhich contains the afordmentioned stuff
11:44.48B_Lizzardaforementioned
11:45.19RPB_Lizzard: Please try to keep in mind we can't read minds. You mean in DL_DIR/git?
11:45.28B_Lizzard:)
11:45.31B_LizzardNo
11:45.49B_LizzardIt makes a directory named  jlime.org.jlime-stable.git in DL_DIR
11:46.07B_Lizzardso it's DL_DIR/jlime.org.jlime-stable.git/.git/<sources>
11:46.37pH5RP: regarding my xorg-xserver PACKAGES problem, if I print PACKAGES from any do_* python function (for example do_listtasks), I already get the duplicates.
11:46.46B_LizzardUm, It's just a problem since it download a bare directory tree instead of the sources themselves
11:47.28RPpH5: that doesn't sound good :/
11:47.29pH5I can also see that the feeder is called twice prepending the "${PN}-xprint ${PN}-xvfb ${PN}-utils" to PACKAGES, but I don't know from where..
11:48.13RPpH5: Could you try adding some prints of PACKAGES before and after the data expansion in build.py?
11:50.19RPpH5: Is this with -b or without -b btw?
11:50.29RPand I'm assuming bitbake trunk?
11:52.53pH5RP: bitbake trunk, with -b
11:53.13RPpH5: Can you try it without -b ?
11:53.15pH5and it happens somewhere before the NOTE: build ... started message
11:53.39B_LizzardRP: I think it works now.
11:53.44B_LizzardThanks a lot, dude. :)
11:53.52pH5ok, give me some time to rebuild that cache..
11:54.18RPpH5: I have a hunch -b might have broken with the recent changes in bitbke
11:55.02*** part/#oe swc666 (n=no@24.143.67.18)
12:00.37RPpH5: I've confirmed its a trunk only problem which worries me a lot :/
12:00.58*** join/#oe Marex (n=marex@gwfm10-3-250.802.cz)
12:01.03*** join/#oe mr_nice (n=mr_nice@91-65-161-14-dynip.superkabel.de)
12:01.47pH5RP: and you are right in that it's limited to -b. bitbake xserver-xorg -clisttasks just gave the correct result
12:02.37RPpH5: That narrows down the problem quite nicely :)
12:03.50RPpH5: buildFile in cooker.py is doing something bad, I'm just not sure what
12:07.36CIA-3903rpurdie * r1041 10bitbake/lib/bb/cooker.py: cooker.py: Remove leftover from old code, fixing double parsing whe using the -b option
12:07.44RPpH5: found it :)
12:08.01pH5RP: eww, you're fast :)
12:09.48pH5yes, that fixed it. thanks a lot.
12:14.59*** join/#oe kristoffer (n=kristoff@62.209.186.97)
12:32.55*** join/#oe pvanhoof (n=pvanhoof@d54C0EE14.access.telenet.be)
12:40.57pH5RP: could you add something along the lines of http://en.pastebin.ca/944778 to bitbake so that knotty gives non-zero return values in the shell if an error occured?
12:41.36*** join/#oe cyrilRomain (n=cyrilRom@AToulouse-157-1-66-172.w81-50.abo.wanadoo.fr)
12:44.45*** join/#oe likewise (n=leon@82-171-51-231.ip.telfort.nl)
12:49.11CIA-3903Laibsch 07org.oe.dev * r41716f31... 10/ (1 classes/seppuku.bbclass): seppuku: add PN to comment line for attachment (as discussed on ml)
12:49.15CIA-3903pH5 07org.oe.dev * rf8231bbc... 10/ (3 files in 3 dirs):
12:49.15CIA-39xserver-xorg-1.4: add a workaround to xorg-xserver.m4
12:49.16CIA-39* stops cross compiling badness during xorg drivers do_configure:
12:49.16CIA-39<PROTECTED>
12:49.16CIA-39<PROTECTED>
12:49.20CIA-3903pH5 07org.oe.dev * rdb34ca36... 10/ (1 packages/xorg-app/xrdb_1.0.5.bb): xrdb: add 1.0.5
12:49.25CIA-3903pH5 07org.oe.dev * r1c77971e... 10/ (1 packages/xorg-app/xrandr_1.2.3.bb): xrandr: add 1.2.3
12:50.09pH5"prepent"? :/
12:52.24CIA-3903pH5 07org.oe.dev * r1ca35b28... 10/ (1 packages/xorg-app/xprop_1.0.4.bb): xprop: add 1.0.4
12:52.29CIA-3903pH5 07org.oe.dev * r6a15d9f4... 10/ (1 packages/xorg-app/xkbcomp_1.0.4.bb): xkbcomp: add 1.0.4
12:54.05CIA-3903rpurdie * r1042 10bitbake/ (ChangeLog bin/bitbake lib/bb/ui/knotty.py): Add return value handling (thanks pH5)
12:55.31CIA-3903pH5 07org.oe.dev * r35e8014f... 10/ (1 packages/xorg-app/xinput_1.3.0.bb): xinput: add 1.3.0
12:55.35CIA-3903pH5 07org.oe.dev * rc4cca98d... 10/ (1 packages/xorg-app/xinit_1.0.8.bb): xinit: add 1.0.8
12:58.24*** part/#oe dcordes (n=snoopdog@unaffiliated/dcordes)
12:58.32*** join/#oe rschuster (n=rob@e179069094.adsl.alicedsl.de)
13:01.06mr_nicehi all, can someone help me with base_version_less_or_equal() function? it complains about unsupported operand type(s). here is my output http://pastebin.ca/944795
13:02.49mr_niceI was trying to add it to task-base.bb
13:07.28*** join/#oe TheCan (n=thecan@dslb-088-067-129-195.pools.arcor-ip.net)
13:08.39*** join/#oe e-ffi (n=cybercom@e-ffi.bsnet.se)
13:37.04*** join/#oe gremlin[it] (n=gremlin@ppp-141-42.25-151.libero.it)
13:37.24*** join/#oe cesarb (n=cesarb@wikipedia/cesarb)
13:44.02*** join/#oe NineX (i=ninex@straszna.tragedia.eu.org)
13:44.04RPmr_nice: It means somewhere something tried to do None + str("something") which isn't an operation which is allowed
13:44.21RPmr_nice: I suspect KERNEL_VERSION evaluated to None
13:44.44RPKERNEL_VERSION onlys works once the kernel is staged
13:50.23*** join/#oe mickeyl|bossa (n=mickey@189.44.51.122)
13:51.26gremlin[it]hi mickeyl|bossa, how is brasil ?!
13:51.48mickeyl|bossawarm!
13:52.05mickeyl|bossanice weather, the water is really warm
13:52.49gremlin[it]hihiih!
13:53.00mickeyl|bossaand the beach babes are mmmh...
13:54.07mickeyl|bossa:D
13:54.21RPhi mickeyl|bossa
13:54.41gremlin[it]mickeyl|bossa are u married ?
13:55.01mickeyl|bossayes i am... that's why i am only talking ;)
13:55.04cdbot2* * OE Bug 4084 has been created by mainframe-junkie(AT)gmx.net
13:55.06cdbot2* * Simpad - Angstrom 2007. 12 R10 hangs with soft lockup - hwclock
13:55.08cdbot2* * http://bugs.openembedded.net/show_bug.cgi?id=4084
13:55.10gremlin[it]HAHAHAHHA
13:55.21mickeyl|bossahi RP
13:56.05mr_niceRP: thx. do you have a hint for me how to get it working? On 2.6.24 the aes module name was changed and now there is a 2.6.21 kernel with that module build into the image
13:56.45RPmr_nice: Why not just RRECOMMEND them both?
13:58.00mr_niceRP: the problem is that kernel-module-aes exists for 2.6.21. in the angstrom image then kernel 2.6.21 with aes module is build into the image
13:58.40mr_niceRP: a more generic way would be even better because on some archs there is a kernel-module-aes-arch module available
13:59.03RPmr_nice: The problem is we really don't support packages depending on the configuration of other packages. Package A doesn't know what version of package B will build
13:59.46RPmr_nice: It would probably work if you have some custom python in there which would ignore the None value but I'm still not keen to start introducing inter package dependencies like that
14:00.01mr_niceRP: so adding kernel-module-aes-generic is the best way?
14:00.37RPmr_nice: Well, kernel modules should always be RRECOMMENDS and doing so for each name it might use doesn't really cause a problem
14:03.15mr_niceRP: hm, ok - thanks
14:08.28*** join/#oe timtimred (n=On3@82-34-50-106.cable.ubr02.chel.blueyonder.co.uk)
14:10.22*** join/#oe wrobbie (n=rob@cm38.kappa85.maxonline.com.sg)
14:33.41cyrus__RP: tryign to build linux-rp and get the following error http://pastebin.com/m5ad795e9
14:33.52cyrus__RP: I am trying to build your kernel used for the hx2000 port
14:34.52RPcyrus__: hx2000 is in a bad way at the moment and needs some tlc :(
14:36.49CIA-3903pH5 07org.oe.dev * r51b9852f... 10/ (1 packages/xorg-app/xfs_1.0.6.bb): xfs: add 1.0.6
14:36.54CIA-3903pH5 07org.oe.dev * r6b7efde5... 10/ (1 packages/xorg-app/xfontsel_1.0.2.bb): xfontsel: add 1.0.2
14:36.58CIA-3903pH5 07org.oe.dev * r634bf834... 10/ (1 packages/xorg-app/xdm_1.1.7.bb): xdm: add 1.1.7
14:37.03CIA-3903pH5 07org.oe.dev * r2dda62cb... 10/ (5 files in 4 dirs): xev: add 1.0.3
14:37.08CIA-3903pH5 07org.oe.dev * r7aeb0fcb... 10/ (1 packages/xorg-app/xcompmgr_1.1.4.bb): xcompmgr: add X compositing manager 1.1.4
14:37.13CIA-3903pH5 07org.oe.dev * rcbc77be6... 10/ (1 packages/xorg-app/xauth_1.0.3.bb): xauth: add 1.0.3
14:37.17CIA-3903pH5 07org.oe.dev * re02a9e94... 10/ (1 packages/xorg-app/twm_1.0.4.bb): twm: add 1.0.4
14:37.22CIA-3903pH5 07org.oe.dev * r52e72481... 10/ (1 packages/xorg-app/mkfontscale_1.0.4.bb): mkfontscale: add 1.0.4
14:37.27CIA-3903pH5 07org.oe.dev * r2da0b92f... 10/ (1 packages/xorg-app/mkfontscale-native_1.0.4.bb): mkfontscale-native: add 1.0.4
14:37.31CIA-3903pH5 07org.oe.dev * rf15e0f75... 10/ (3 files in 2 dirs): mkfontdir: add 1.0.4
14:37.36CIA-3903pH5 07org.oe.dev * rbd2e10ed... 10/ (1 packages/xorg-app/mkcomposecache_1.2.bb): mkcomposecache: add 1.2
14:37.41CIA-3903pH5 07org.oe.dev * r42034b6a... 10/ (1 packages/xorg-app/x11perf_1.5.bb): x11perf: add 1.5
14:38.28RP-> afk
14:38.59*** join/#oe aloisiojr (n=aloisio@189.70.82.163)
14:44.05cdbot2* * OE Bug 4061 has been RESOLVED (FIXED) by andrew.paulsen(AT)gmail.com
14:44.07cdbot2* * gnome-vfs 2.22.0 recipe
14:44.09cdbot2* * http://bugs.openembedded.org/show_bug.cgi?id=4061
14:45.33*** join/#oe woglinde (i=woglinde@e178068064.adsl.alicedsl.de)
14:55.36*** join/#oe rd_ (n=dr@vnsecurity.net)
15:00.52*** join/#oe Magon (n=Magon@213.155.227.229)
15:06.54*** join/#oe rd_ (n=dr@vnsecurity.net)
15:17.43*** join/#oe summatusmentis (n=summatus@72.168.202.219)
15:22.58*** join/#oe likewise (n=leon@82-171-51-231.ip.telfort.nl)
15:23.17likewisehello
15:27.57woglindehi likewise
15:28.22*** join/#oe tcooksey_ (n=tcooksey@nat/trolltech/x-c57670e309d7e5c1)
15:45.05*** join/#oe Sup3rkiddo (n=sudharsh@unaffiliated/sudharsh)
15:46.11*** join/#oe benla1 (n=benlau@221.125.8.105)
15:46.20*** join/#oe zecke (n=ich@212.23.103.130)
15:46.30mr_nicewoglinde: hi, do you know how if there is a package which contains lsof?
15:47.03cyrus__RP - is there another way I can just build a test kernel for that port?
15:48.12*** join/#oe Kensan (n=ken@gw.ptr-80-238-205-18.customer.ch.netstream.com)
15:48.13mr_nicewoglinde: sorry found it ;) with find.
15:48.23woglindemr_nice hm if I remeber correctly you can compile busybox with lsof support
15:48.36mr_nicewoglinde: that would be more nice
15:48.44mr_nicewoglinde: i will try that also
15:49.04mr_nicewoglinde: thx
15:49.30KensanHello. I am hitting http://bugs.openembedded.org/show_bug.cgi?id=1449 and cant figure out what's wrong with my environment. Anybody got a clue?
15:52.12VoodooZ~
15:53.27VoodooZIf I was to post a .bb file for linux-uvc would someone mind committing it for me? I've tested it and it works. THanks in advance..
15:54.17*** join/#oe rschuste1 (n=rob@brln-4db987ee.pool.einsundeins.de)
16:04.37*** join/#oe kristoffer (n=kristoff@62.209.186.97)
16:08.08likewiseanyone else hitting this with glib-2.0-2.15.6 configure?  "checking for posix getgrgid_r... configure: error: cannot run test program while cross compiling"
16:08.42woglindelikewise is that a fresh compile?
16:08.49likewiseyes
16:08.52woglindelikewise or on an existing dir?
16:08.53woglindeokay
16:08.54woglindehm
16:09.22likewiseit's powerpc/uclibc though
16:09.31likewisemaybe a site specific item missing
16:09.40woglindehm
16:09.42woglindeyes
16:10.52*** join/#oe kristoffer (n=kristoff@62.209.186.97)
16:11.08woglindetry to set it in site/powerpc-linux-uclibc
16:13.02likewisepowerpc-common:6:ac_cv_func_posix_getgrgid_r=${ac_cv_func_posix_getgrgid_r=yes}
16:16.28*** join/#oe zap (n=zap@28.169.249.ozerki.net)
16:16.42woglindehm
16:17.42likewise(btw, I do see some items appearing redudantly in uclibc that are already in -common for other platforms)
16:17.52likewiseredundantly
16:23.27*** join/#oe Khem (n=khem@adsl-71-146-43-252.dsl.pltn13.sbcglobal.net)
16:24.21woglindehi khem
16:25.00Khemwoglinde: hi
16:28.45likewisehi khem
16:29.12likewisesite/powerpc-common and -linux was indeed missing this one.
16:29.19cyrus__RP - basically waht I am looking for is to just build a kernel for the hx2000 port. So I guess all I really need is the .config
16:29.49likewiseAlso, I see a lot of discrepancies between -common and -linux across archs. I recon most of the POSIX function checks belong in -linux and not in -common.
16:30.05woglindedamn it
16:30.19woglindeno module are copied in opie-image
16:32.03Khemgnome-2.22 damn it another error undefined symbol: g_once_init_enter_impl
16:33.27woglindegnome suckz
16:33.29woglinde*g*
16:34.11*** join/#oe j728 (n=jornix@189.145.147.66)
16:34.14zeckewoglinde: fluxbox rocks?
16:34.41Khemzecke: it does
16:36.08Khemzecke: Can I use fluxbox instead with x11-image ?
16:36.29B_LizzardHmm
16:36.45B_LizzardDoes anyone have glib-2.15.6 failing at do_configure?
16:37.36KhemB_Lizzard: I have glib 2.16.1 and it compiled but I think I have more than 1 version of glib
16:37.47zeckeKhem: no idea
16:37.49B_Lizzardhmmm
16:37.55B_LizzardIt fails with this:
16:38.07B_Lizzardchecking for posix getgrgid_r... configure: error: cannot run test program while cross compiling
16:38.16B_LizzardWhich seems pretty universal
16:38.38B_LizzardI could delete the offending part from configure.in, I just wanted to ask if this is just me
16:38.41woglindehm how is the ipkg commond that oe uses to install in rootfs-dir?
16:40.48B_LizzardI'll update to 2.16.1
16:41.24woglindehm found it
16:42.03*** join/#oe Varoudis_ (n=varoudis@87-194-34-216.bethere.co.uk)
16:43.21likewiseB_Lizzard: fixing it.
16:43.34B_LizzardThanks dude.
16:43.35likewiseB_Lizzard: for which arch are you building???
16:43.41B_LizzardSH3
16:44.01B_LizzardShould happen on any arch, really.
16:44.07likewiseB_Lizzard: see my question at 17:08! I beat you to it.
16:44.17likewiseNot necessarely I think.
16:44.19B_Lizzard:D
16:44.35B_LizzardWell, any arch where you're crosscompiling ;)
16:44.43likewiseB_Lizzard: It depends on the site/arch-* files in org.oe.dev/
16:44.51*** join/#oe Sleep_Walker (n=Sleep@195.22.44.103.adsl.nextra.cz)
16:45.11B_LizzardAha
16:45.21B_LizzardAlso, if you can, update glib-2.0 to 2.16.1
16:45.36B_Lizzard2.15.x were development releases
16:45.41likewisesomeone else is on that (see angstrom mailing list if I'm not mistaken).
16:46.01B_LizzardOh, ok.
16:46.02B_Lizzard:)
16:51.37B_Lizzardlikewise, so basically it was ac_cv_func_posix_getgrgid_r=${ac_cv_func_posix_getgrgid_r=yes} missing from the arch files?
16:52.35likewiseB_Lizzard: well, yes, that's what I thought first, but in my case they are already defined in "powerpc-common". I wonder why they aren't picked up.... regression in siteinfo.bbclass maybe??! I'm checking.
16:59.07likewiseB_Lizzard: where are the sh3 arch site files anyway?!
16:59.16B_Lizzard:D
16:59.21B_LizzardShould be jornada6xx
16:59.30likewiseah, site/sh-common
16:59.38B_Lizzardaha
16:59.38Khemanyone compiling bluez-gnome_0.24.bb ?
17:07.05cdbot2* * OE Bug 4085 has been created by <OE-Autobuilder>
17:07.07cdbot2* * libmikmod-3.2.0-beta2-autobuild
17:07.09cdbot2* * http://bugs.openembedded.net/show_bug.cgi?id=4085
17:08.26likewiseB_Lizzard: strange, I just updated my repository and checkout, glib 2.16.1 is in, and that one configures/builds without problems!
17:08.50B_Lizzard:D
17:08.53B_LizzardLemme update then
17:09.04B_LizzardMaybe they added a patch or something
17:12.42Khemhmmm my problem is bluez-gnome-0.24
17:12.50Khembluez-gnome-0.15 works well
17:14.08B_LizzardOK
17:14.14B_Lizzardoops
17:15.05cdbot2* * OE Bug 4086 has been created by sip.nslu(AT)gmail.com
17:15.07cdbot2* * linux_uvc bb file
17:15.09cdbot2* * http://bugs.openembedded.net/show_bug.cgi?id=4086
17:15.17*** join/#oe slapin (n=slapin@iap-pxy-mow1.siemens.ru)
17:24.04cdbot2* * OE Bug 4087 has been created by raj.khem(AT)gmail.com
17:24.06cdbot2* * bluez-gnome_0.24.bb fails to build
17:24.08cdbot2* * http://bugs.openembedded.net/show_bug.cgi?id=4087
17:34.18*** join/#oe Khem_ (n=khem@adsl-71-146-43-252.dsl.pltn13.sbcglobal.net)
17:42.33*** join/#oe Dodji (n=dodji@torimasen.com)
17:43.43*** join/#oe Philippe (n=nora@a88-113-108-107.elisa-laajakaista.fi)
17:47.27*** join/#oe mickeyl|bossa (n=mickeyl@200.164.216.130)
17:48.04B_LizzardAh, updated OE and it still does it.
17:48.12B_LizzardLemme specify that thing in my sh-arch file
17:51.07B_LizzardIt works
17:51.34B_Lizzardlikewise, could you please add "ac_cv_func_posix_getgrgid_r=${ac_cv_func_posix_getgrgid_r=yes}" in the sh-common file and commit to upstream?
17:52.20B_LizzardI don't want to post a bug report for something this simple
17:53.12B_Lizzardadd it under line 6 as in arm-linux
17:55.10*** join/#oe mykilx (n=mykilx@cpe-72-185-226-254.tampabay.res.rr.com)
17:55.14likewiseB_Lizzard: sure
17:55.22likewisebut I think it must go into sh-linux
17:55.43B_Lizzardno such file
17:57.01B_LizzardThanks a lot, dude. :)
17:57.36likewiseHmmn, I will commit as you say, but there is something else wrong here as well.
18:01.29*** part/#oe Khem_ (n=khem@adsl-71-146-43-252.dsl.pltn13.sbcglobal.net)
18:05.17B_LizzardEh?
18:05.24*** join/#oe hvontres|home (n=hvontres@adsl-75-22-170-77.dsl.sndg02.sbcglobal.net)
18:05.24B_Lizzardglib builds when I add that
18:05.27*** join/#oe nts____gi (n=gints@62.84.15.211)
18:05.36likewiseIn *my* case at least :-)
18:06.37Croftonanyone know much about glibc symbol versioning?
18:07.54CIA-3903likewise 07org.oe.dev * rc74f01bd... 10/ (1 site/sh-common): site/sh-common: Added ac_cv_func_posix_getgrgid_r=yes
18:11.29hillct<PROTECTED>
18:13.58Croftondo we have any machine files that use the ARM Cortex-A8
18:14.12Croftonie, can we build tools chains for the ARM Cortex-A8
18:14.58RPCrofton: I'm sure I've seen it done but I don't think there are any machine files in OE
18:15.22CroftonI need to beg a beagle baord
18:17.45Croftonwonders how OE knows to configure gcc for a specific cpu ....
18:18.35RPCrofton: conf/machine/include/tune-*
18:18.37*** join/#oe cyrilRomain (n=cyrilRom@AToulouse-157-1-66-172.w81-50.abo.wanadoo.fr)
18:20.01Croftonhmm
18:20.03pb__Crofton: gcc itself is generic.  you select the target architecture you want at run time via the -march=/-mtune= flags.
18:20.08Croftonin the arm1136 tune file
18:20.11Croftonok
18:20.23Croftonso that is TARGET_CC_ARCH
18:20.42Croftonremember having to configure gcc for the desired target ...
18:21.06pb__you did use to have to do that in olden days.
18:21.10Croftonso what I need to know is the -march=cortex something or other
18:21.14Croftonis old
18:21.25Croftonhas used gcc-1.x.x
18:21.55hillctheh, 1.0 wasn't THAT long ago...
18:22.10Croftonlast century
18:22.23hillctlast century wasn't that long ago either
18:22.51pb__Crofton: cortex-a8 is armv7, so I guess you want something along the lines of "-march=armv7 -mtune=cortex-a8".
18:22.53Croftonany way to get gcc to list available archs?
18:23.45*** join/#oe rschuster (n=rob@brln-4db987ee.pool.einsundeins.de)
18:23.47pb__I think "gcc --help --verbose" will do it.
18:25.17Croftonman gentooists would have a field day with all these options!
18:25.18pb__hm, maybe not.  in that case you might be stuck with reading the source code.
18:25.48Croftonor googling
18:25.55pb__yeah, or that
18:26.03Croftonok, need to finish kitchen wiring, must finish one project b4 starting another
18:29.13*** join/#oe treitmayr (n=treitmay@85-127-80-11.dynamic-lac.adsl-line.inode.at)
19:14.00*** join/#oe Whyvas (n=whyvas@bas1-barrie18-1242378213.dsl.bell.ca)
19:14.08*** join/#oe KhemHome (n=KhemHome@adsl-71-146-43-252.dsl.pltn13.sbcglobal.net)
19:15.29*** part/#oe Kensan (n=ken@gw.ptr-80-238-205-18.customer.ch.netstream.com)
19:16.16*** join/#oe Khem (n=Khem@adsl-71-146-43-252.dsl.pltn13.sbcglobal.net)
19:16.52Jin^eLDre
19:17.33WhyvasCAMELS
19:23.21*** join/#oe flo_lap (n=fuchs@f048033012.adsl.alicedsl.de)
19:23.25CIA-3903koen 07org.oe.dev * rb532a858... 10/ (6 files in 2 dirs):
19:23.25CIA-39tune files: add files for generic armv7 and cortex series
19:23.25CIA-39* http://gcc.gnu.org/onlinedocs/gcc/ARM-Options.html
19:23.25CIA-39* http://en.wikipedia.org/wiki/ARM_architecture
19:26.56*** join/#oe CSMan (n=csman@bas1-montreal42-1242352886.dsl.bell.ca)
19:28.31pb__hi flo_lap
19:31.22Croftonthanks koen
19:33.35KhemCrofton: gowdy
19:33.39Khems/g/h/
19:36.19*** join/#oe mwester_ (n=mwester@gw.mwester.net)
19:36.46Khemoh wow armv7 support :)
19:45.37Whyvasdiabetus
19:45.57KhemRP: I installed ts_tests package
19:46.38KhemRP: running ts_test
19:46.51Khemtells me /dev/touchscreen/ucb1x00: No such file or directory
19:47.08*** join/#oe gremlin[it] (n=gremlin@ppp-141-42.25-151.libero.it)
19:47.23Khemthen I export TSLIB_TSDEVICE=/dev/input/touchscreen0
19:48.15Khemnow I can see data being printed when I do something on touchscreen but pointers on touchscreen are still frozen
19:52.01*** join/#oe rd_ (n=dr@vnsecurity.net)
19:53.38*** join/#oe Philippe (n=nora@a88-113-108-107.elisa-laajakaista.fi)
19:57.01CIA-3903koen 07org.oe.dev * r21fd89b5... 10/ (1 conf/machine/beagleboard.conf): beagleboard: start skeleton machine file for the beagleboard
19:58.06Croftonhmm, he just saved me a couple of hours
20:00.51*** join/#oe jbs_ (n=Bernardo@89-180-180-108.net.novis.pt)
20:06.54*** join/#oe lrg (n=liam@lrg2.demon.co.uk)
20:20.33*** join/#oe SyNk1 (n=SyNko@host28-165-dynamic.15-87-r.retail.telecomitalia.it)
20:26.29*** join/#oe osas (n=nnnnnnnn@nslu2-linux/osas)
20:26.37flo_lapre
20:26.41flo_lapoops
20:28.41*** part/#oe SyNk1 (n=SyNko@host28-165-dynamic.15-87-r.retail.telecomitalia.it)
20:42.05*** part/#oe Whyvas (n=whyvas@bas1-barrie18-1242378213.dsl.bell.ca)
20:44.37*** join/#oe stefan_schmidt (n=stefan@62.75.240.18)
20:53.38*** join/#oe pH5 (n=ph5@e178224226.adsl.alicedsl.de)
20:54.19flo_laphrm... logfs is not yet ready for oe :-(
21:01.40*** join/#oe likewise (n=leon@82-171-51-231.ip.telfort.nl)
21:05.30*** part/#oe stefan_schmidt (n=stefan@62.75.240.18)
21:09.24*** join/#oe NineX (i=ninex@2001:16b0:1005:0:0:0:0:3)
21:11.41xjqianautoconf 2.61 why I still get this error? configure.ac:20: error: possibly undefined macro: AC_DEFINE
21:19.28*** join/#oe SyNko (n=SyNko@87.8.165.53)
21:19.49*** join/#oe treitmayr (n=treitmay@85.127.250.72)
21:22.49*** join/#oe treitmayr (n=treitmay@85-127-17-228.dynamic.xdsl-line.inode.at)
21:23.37CIA-3903koen 07org.oe.dev * r7b5f85c2... 10/ (1 conf/machine/beagleboard.conf): beagleboard: use linux-beagleboard
21:23.41CIA-3903koen 07org.oe.dev * rd14beb06... 10/ (4 files in 3 dirs): linux-beagleboard: skeleton kernel file
21:23.48*** join/#oe rd_ (n=dr@vnsecurity.net)
21:25.59*** part/#oe mickeyl|bossa (n=mickeyl@200.164.216.130)
21:26.32hillctdid something change in te last 66 months with regard to the DEPEND directive? my recipes seem to be disregarding dependencies now...
21:26.41hillcter 5 months
21:26.53hillcter  months. Whatever...
21:31.09*** join/#oe SyNk1 (n=SyNko@host230-165-dynamic.8-87-r.retail.telecomitalia.it)
21:31.31*** part/#oe SyNk1 (n=SyNko@host230-165-dynamic.8-87-r.retail.telecomitalia.it)
21:32.08*** join/#oe wicknix (n=wicked@63.135.131.25)
21:36.30*** join/#oe SyNk2 (n=SyNko@host92-146-dynamic.15-87-r.retail.telecomitalia.it)
21:41.45CIA-3903koen 07org.oe.dev * r682f46ad... 10/ (1 packages/linux/linux-beagleboard_git.bb): linux-beagleboard: switch to http protocol as that seems to be more forgiving with the wet piece of string internet connection the beagleboard server has
21:43.16likewisehillct: image recipe?
21:44.05hillctnope. just an app. In my case it's both callweaver' and 'spandsp'
21:44.47hillctthe former being local, the latter being checked in LONG ago
21:45.57likewisenothing should have changed to make DEPENDS being ignored. They are build dependencies, all items in DEPENDS should be built before callweaver itself is built
21:47.46hillctyeah
21:47.54hillctreally strange behavior
21:48.15hillctI'm having to build the dependencies by hand for no aparent reason
21:49.28*** join/#oe CSMan_ (n=csman@bas1-montreal42-1178047483.dsl.bell.ca)
21:59.57*** join/#oe CSMan (n=csman@bas1-montreal42-1178047483.dsl.bell.ca)
22:01.05*** join/#oe Marex (n=marex@vasut.kolej.mff.cuni.cz)
22:09.35*** join/#oe rschuster (n=rob@brln-4db987ee.pool.einsundeins.de)
22:22.36Khemsomething is wrong with monotone.openembedded.org I am not able to connect to it
22:44.11*** join/#oe mithro (n=tim@secure.astc-design.com)
22:49.02*** join/#oe chouimat (n=dieu@r2351064.cidc.net)
22:56.21*** join/#oe dcordes (n=snoopdog@unaffiliated/dcordes)
22:58.12*** join/#oe timtimred (n=On3@82-34-50-106.cable.ubr02.chel.blueyonder.co.uk)
22:59.43zecken8
23:02.01flo_lapzecke: gn
23:05.53CroftonKhemWork, me to
23:06.12CroftonI can't pull from mtn
23:08.39cyrus__I am making headway on compiling a kernel for my IPAQ but am stuck at this error - http://pastebin.com/m13d573b7
23:08.54cyrus__undefined value in the referenced file.
23:25.27*** join/#oe summatusmentis (n=summatus@72.168.202.219)
23:32.52*** part/#oe rschuster (n=rob@brln-4db987ee.pool.einsundeins.de)
23:33.19*** join/#oe rschuster (n=rob@brln-4db987ee.pool.einsundeins.de)
23:39.29*** part/#oe rschuster (n=rob@brln-4db987ee.pool.einsundeins.de)
23:45.34*** join/#oe rschuster (n=rob@brln-4db987ee.pool.einsundeins.de)
23:57.26*** join/#oe rtm (n=rtm@pool-151-199-45-39.bos.east.verizon.net)
23:59.24rtmI have not been able to get gprof or gcov to work on an oe device.   Does anyone online have experience with that, or know if it is possible to you those tools?

Generated by irclog2html.pl Modified by Tim Riker to work with infobot.