| 00:22.31 | *** join/#oe jbs (n=Bernardo@89.181.65.73) |
| 00:24.51 | *** join/#oe Keizer (n=keizer@c-69-139-42-47.hsd1.fl.comcast.net) |
| 00:25.51 | *** join/#oe RP (i=1000@tim.rpsys.net) |
| 00:30.31 | *** join/#oe j0tt (n=j@unaffiliated/jott) |
| 00:36.19 | *** join/#oe greentux_ (n=lemke@Z766e.z.pppool.de) |
| 00:40.00 | *** join/#oe Varoudis_ (n=varoudis@91.106.4.154) |
| 00:46.09 | *** part/#oe dfoley (n=dfoley@s142-179-108-133.bc.hsia.telus.net) |
| 00:54.06 | *** join/#oe dijenerate (n=dijenera@72.51.94.113) |
| 01:07.32 | *** join/#oe csmanx (n=csman@dyn-158-084.wireless.concordia.ca) |
| 01:08.52 | *** part/#oe Keizer (n=keizer@c-69-139-42-47.hsd1.fl.comcast.net) |
| 01:11.19 | *** join/#oe xjqian (n=gordon@24-107-180-75.dhcp.stls.mo.charter.com) |
| 01:25.04 | *** join/#oe wrobbie (n=rob@cm22.kappa84.maxonline.com.sg) |
| 01:29.33 | *** join/#oe rd_ (n=dr@toi.yeu.phu.nu) |
| 01:31.03 | *** join/#oe mhnoyes_ (n=mhnoyes@dialup-4.246.18.56.Dial1.SanJose1.Level3.net) |
| 01:36.58 | *** join/#oe benlau (n=benlau@221.125.8.107) |
| 01:44.48 | *** join/#oe jacques (n=jacques@nslu2-linux/jacques) |
| 01:47.08 | *** join/#oe bluelightning (n=blueligh@222-154-187-29.jetstream.xtra.co.nz) |
| 01:51.05 | cdbot2 | * * OE Bug 3175 has been created by angus(AT)handheldshell.com |
| 01:51.07 | cdbot2 | * * Toshiba eseries kernel recipe |
| 01:51.09 | cdbot2 | * * http://bugs.openembedded.org/show_bug.cgi?id=3175 |
| 02:09.33 | *** join/#oe memeruiz_ (n=memeruiz@e176227236.adsl.alicedsl.de) |
| 02:13.00 | *** join/#oe AvengerMoJo (n=alex@61.14.130.203) |
| 02:16.14 | *** part/#oe xjqian (n=gordon@24-107-180-75.dhcp.stls.mo.charter.com) |
| 02:16.52 | Crofton|home | argggh I am getting burned by the git fetcher and 64 bit machines! |
| 02:20.47 | Henryk | Crofton: how so? |
| 02:23.29 | Crofton | git fetches are failing on my machines w64 bit installs |
| 02:23.46 | Crofton | but git installed works fine in machine |
| 02:24.18 | Crofton | I think something is fishy in git-native |
| 02:28.09 | *** join/#oe khem (n=khem@adsl-71-146-6-187.dsl.pltn13.sbcglobal.net) |
| 02:28.18 | Henryk | ah, sure. i was just about to disagree (i just had a full build of openmoko-devel-image and openmoko-feed on x86_64) but then remembered that any git failures probably have been masked by PREMIRRORS in openmoko |
| 02:28.48 | Crofton | I was wondering why it hadn't bit openmoko |
| 02:28.56 | Crofton | need to beat up RP in the morning I think |
| 02:29.19 | Crofton | or see if I can go the assume provided route until someone can figure it out |
| 02:29.31 | Crofton | running a build on the 32 bit install at the moment |
| 02:30.33 | Crofton | ok, time for bed, hopefully this build runs through :) |
| 02:31.25 | Crofton|home | gn |
| 02:32.05 | Henryk | good night |
| 02:38.06 | *** join/#oe AvengerMoJo (n=alex@61.14.130.203) |
| 02:39.18 | *** join/#oe AvengerMoJo (n=alex@61.14.130.203) |
| 03:11.16 | *** join/#oe AvengerMoJo (n=alex@61.14.130.203) |
| 03:43.12 | *** join/#oe tank1770 (i=tank17@gateway/tor/x-da58b5db788b6d83) |
| 03:46.52 | *** join/#oe W8TVI_ (n=me@71.238.163.129) |
| 03:47.16 | *** join/#oe wrobbie (n=rob@cm22.kappa84.maxonline.com.sg) |
| 03:48.07 | *** part/#oe khem (n=khem@adsl-71-146-6-187.dsl.pltn13.sbcglobal.net) |
| 03:57.49 | Supaplex | <PROTECTED> |
| 05:03.29 | *** join/#oe nud (n=sf@91.86.73.106) |
| 05:19.58 | *** join/#oe pleemans (n=peter@leemanpe.ugent.be) |
| 05:30.03 | *** join/#oe _law_ (n=law@mail.stiftadmont.at) |
| 05:46.50 | *** join/#oe _law_ (n=law@mail.stiftadmont.at) |
| 05:52.47 | *** join/#oe Robwoerle (n=bob@M9fdd.m.pppool.de) |
| 06:00.27 | *** join/#oe polyonymous_note (n=hacker@pD95389F5.dip0.t-ipconnect.de) |
| 06:05.43 | *** join/#oe joern__ (n=joern@e177158242.adsl.alicedsl.de) |
| 06:13.51 | *** join/#oe obergix[work] (n=olivier@mag77-1-82-238-13-91.fbx.proxad.net) |
| 06:16.43 | *** join/#oe Longfield (n=valentin@138.131.206.172) |
| 06:22.35 | *** join/#oe polyonymous (n=hacker@pD95389F5.dip0.t-ipconnect.de) |
| 06:26.32 | Robwoerle | how do i tell oe to not build qemu-native but use a host available version ? |
| 06:28.54 | *** join/#oe rob_w (n=bob@M9fdd.m.pppool.de) |
| 06:55.41 | CIA-3 | 03pH5 07org.oe.dev * r947449a1... 10/ (1 packages/telepathy/libtelepathy_0.2.0.bb): libtelepathy: add 0.2.0 |
| 06:55.46 | CIA-3 | 03pH5 07org.oe.dev * r7723c5a5... 10/ (1 packages/telepathy/telepathy-glib_0.6.0.bb): telepathy-glib: add 0.6.0 |
| 06:55.50 | CIA-3 | 03pH5 07org.oe.dev * r466773a4... 10/ (1 packages/telepathy/telepathy-mission-control_4.45.bb): telepathy-mission-control: add 4.45 |
| 06:58.25 | *** join/#oe Sleep_Walker (n=Sleep@2001:5c0:8fff:fffe:0:0:0:6c7d) |
| 06:59.34 | *** join/#oe nud (n=sf@www.multitel.be) |
| 07:19.39 | *** join/#oe mickey|tw (n=mickeyl@rd.tw.openmoko.org) |
| 07:19.55 | *** join/#oe rob_w|laptop (n=rob_w@p549B966A.dip0.t-ipconnect.de) |
| 07:21.56 | *** join/#oe mickeyl (n=mickeyl@rd.tw.openmoko.org) |
| 07:22.03 | *** join/#oe birunko|away (n=birunko@200.184.118.132) |
| 07:24.48 | *** join/#oe cesarb_ (n=cesarb@ipanema.nitnet.com.br) |
| 07:25.46 | *** join/#oe likewise (n=chatzill@atwork-186.r-212.178.104.atwork.nl) |
| 07:28.51 | hrw | re |
| 07:29.00 | hrw | or even: morning |
| 07:32.11 | *** join/#oe zap (n=zap@16.170.249.ozerki.net) |
| 07:36.37 | XorA | morning |
| 07:39.49 | CIA-3 | 03pH5 07org.oe.dev * r320cf2f1... 10/ (1 packages/telepathy/telepathy-python_0.14.0.bb): telepathy: add telepathy-python 0.14.0 |
| 07:39.53 | CIA-3 | 03pH5 07org.oe.dev * r3e66402a... 10/ (1 packages/telepathy/empathy_0.14.bb): empathy: add 0.14 |
| 07:42.03 | *** join/#oe cyberdeck (i=molter@unaffiliated/cyberdeck) |
| 07:44.57 | koen | good morning all |
| 07:46.23 | zecke | moin |
| 07:55.42 | *** join/#oe chrisromain (n=chrisrom@213.56.248.207) |
| 08:01.19 | *** join/#oe Marex-notebook (n=marex@vasut.kolej.mff.cuni.cz) |
| 08:06.22 | keesj | nice? http://www.compulab.co.il/x270em/html/x270-em-datasheet.htm |
| 08:07.48 | *** join/#oe Timelord (n=TL@16.8c.d12c.cidr.airmail.net) |
| 08:09.12 | koen | keesj: compulab themselves did the OE support :) |
| 08:10.48 | *** join/#oe Bernardo (n=Bernardo@84.39.72.64) |
| 08:12.05 | cdbot2 | * * OE Bug 3176 has been created by autobuild(AT)openembedded.org |
| 08:12.07 | cdbot2 | * * empathy-0.14-r0-do_configure |
| 08:12.09 | cdbot2 | * * http://bugs.openembedded.org/show_bug.cgi?id=3176 |
| 08:12.35 | keesj | koen: so they have good karma! |
| 08:15.42 | *** join/#oe rob_w|laptop (n=rob_w@p549B966A.dip0.t-ipconnect.de) |
| 08:33.44 | *** join/#oe rob_w|laptop (n=rob_w@p549B966A.dip0.t-ipconnect.de) |
| 08:36.42 | *** join/#oe nud (n=sf@www.multitel.be) |
| 08:37.42 | *** join/#oe gilligan_ (i=99@host37-ip2.globalgate.com.ar) |
| 08:37.47 | gilligan_ | morning |
| 08:41.26 | mickey|tw | morning |
| 08:44.28 | *** join/#oe pleemans (n=peter@leemanpe.ugent.be) |
| 08:49.05 | koen | hey mickey|tw |
| 08:50.17 | mickey|tw | yo koen |
| 08:50.45 | *** join/#oe greentux_ (n=lemke@ip-217-18-181-130.static.reverse.dsi.net) |
| 08:51.02 | zecke | mickey|tw: are you there yet? |
| 08:51.11 | mickey|tw | yes. |
| 08:51.15 | mickey|tw | tired |
| 08:51.16 | mickey|tw | but there |
| 08:51.30 | mickey|tw | took over HaraldĀ“s office :D |
| 08:51.43 | zecke | hehe |
| 08:52.14 | mickey|tw | excellent |
| 08:54.03 | alphaone | zecke: Congratulations! |
| 08:55.32 | koen | mickey|tw: watch the next commit |
| 08:56.03 | CIA-3 | 03koen 07org.oe.dev * rd83ba938... 10/ (1 conf/distro/include/angstrom-2007-preferred-versions.inc): |
| 08:56.03 | CIA-3 | conf/distro/include/angstrom-2007-preferred-versions.inc: add file for locking down almost every package |
| 08:56.03 | CIA-3 | ** THIS WILL BE INCLUDED SOON -- REVIEW IT!!! ** |
| 08:56.04 | cdbot2 | * * OE Bug 3177 has been created by <koen> |
| 08:56.06 | cdbot2 | * * Sepukku.bbclass can't attach logs anymore |
| 08:56.08 | cdbot2 | * * http://bugs.openembedded.org/show_bug.cgi?id=3177 |
| 08:57.00 | *** join/#oe ade|desk (n=adavey@194.200.143.249) |
| 09:00.42 | gilligan_ | mickey: there is no way to get a list of all included packages for a specific image from bitbake is there ? apart from the -s option .. with a bit of grep'ing and sed'ing I can get what I want.. but I was just wondering if I just wasted my time :) |
| 09:03.29 | gilligan_ | mickey: eeh.. -g not -s |
| 09:10.51 | steliosk | zecke : hehe. hope you like it. It's the best ouzo :) |
| 09:11.50 | steliosk | koen : also even with the new kernel build x does not start on i486 i assume the same must be on the other "generic" |
| 09:13.28 | zecke | steliosk: I never dran it before, but I will drink more and the bottle is not yet empty |
| 09:13.43 | zecke | steliosk: my boss is Stephan Skrodzki (skrodzki@gmit-gmbh.de) |
| 09:13.52 | *** join/#oe tank1770 (i=tank17@gateway/tor/x-b4ad08174b01b99c) |
| 09:14.24 | steliosk | zecke : use just ice with ouzo to get the flavour and let the ice melt |
| 09:15.06 | steliosk | zecke : thanks, I'll send him a thank you email, for letting us use the office (and abuse the coffee machine) |
| 09:16.21 | *** join/#oe pvanhoof (n=pvanhoof@d54C0EE14.access.telenet.be) |
| 09:19.16 | steliosk | zecke : What do you think by selectivly coping the Dreambox files we need in order to sync it with .dev, instead of a single patch ? |
| 09:19.45 | steliosk | zecke : It's more work but i think it allows to control what gets in |
| 09:19.46 | zecke | destroy's history and doesn't ease future merging :) |
| 09:20.10 | zecke | but I need to work now :} |
| 09:21.17 | steliosk | ok. let me know when you have some time to discuss about this, as i am kind of confused because koen said that history is not lost when copying things from one mtn branch to another |
| 09:22.53 | zecke | steliosk: well, copying from one branch to another == merge |
| 09:28.43 | hrw | steliosk: s/copy/propagate/ |
| 09:31.28 | *** join/#oe Reneger (n=Reneeee@193.78.112.2) |
| 09:31.53 | *** join/#oe mithro (n=tim@ppp246-117.static.internode.on.net) |
| 09:32.12 | *** join/#oe florian (n=fuchs@217.146.132.69) |
| 09:32.44 | florian | good morning |
| 09:33.14 | steliosk | well i was thinking of doing things in a controlled way, by selecting what gets merge and what's not because the dreambox branch is based on a rather "old" version of OE/bitbake |
| 09:33.48 | steliosk | another question is if they would interested to change toolchain i.e move to gcc 4.1.1 |
| 09:34.55 | Reneger | Hi. |
| 09:35.26 | *** join/#oe lrg (n=liam@lumison.wolfsonmicro.com) |
| 09:35.41 | Reneger | I'm using busybox for handling the inittab, but what do i have to do so busybox copies the inittab to the rootfs, just like sysvinit? |
| 09:37.06 | steliosk | hrw : Any idea why X won't start on i486/Angstrom ? the fb0 device is there |
| 09:37.32 | steliosk | avahi also seems to have a tough time to bring up the inet |
| 09:38.26 | hrw | steliosk: no idea |
| 09:39.10 | *** part/#oe AvengerMoJo (n=alex@61.14.130.203) |
| 09:39.11 | hrw | steliosk: you can use 'mtn propagate' to merge single revisions from branch to branch |
| 09:41.37 | steliosk | hrw : probably i need to spend some more "quality time" with the mtn manual |
| 09:42.15 | gilligan_ | dull question.. why does IMAGE_INSTALL="devimage" work, but adding console does not? (ie is not found by bitbake) |
| 09:49.29 | *** join/#oe broonie_ (n=broonie@lumison.wolfsonmicro.com) |
| 09:52.52 | *** join/#oe Frg (n=Frg@chello087206088102.chello.pl) |
| 09:54.32 | *** join/#oe Sleep_Walker (n=Sleep@2001:5c0:8fff:fffe:0:0:0:6c7d) |
| 10:03.34 | Crofton|home | can I asumme provided git-native? |
| 10:04.00 | *** join/#oe AvengerMoJo (n=alex@61.14.130.203) |
| 10:08.22 | koen | Crofton|home: and people still insist using git cures cancer and brings worldpeace |
| 10:08.29 | koen | I guess they aren't using 64bit machines |
| 10:09.06 | Crofton|home | and building with OE |
| 10:10.35 | Crofton|home | ASSUME_PROVIDED += "git-native" |
| 10:10.50 | Crofton|home | any chance this will stop the git fetcher from building it's own git? |
| 10:15.20 | hrw | koen: git works on my 64bit |
| 10:15.31 | Crofton|home | git works fine on 64 bit machines, just not fron within OE |
| 10:15.58 | hrw | Crofton|home: I have git on host and build git-native from OE |
| 10:16.03 | hrw | no problems with fetching |
| 10:16.08 | Crofton|home | hmmm |
| 10:16.30 | Crofton|home | I have two fedora machine with 64 bit installs, and git fetch does not work |
| 10:16.44 | hrw | fedora... I use debian |
| 10:16.44 | Crofton|home | SO iahve to do davinci builds on 32 bit machine |
| 10:17.27 | Crofton|home | when you have spare cycles, can you try build minimal-image for machine davinci-dvevm? |
| 10:17.42 | hrw | angstrom? |
| 10:17.49 | Crofton|home | of course :) |
| 10:17.59 | hrw | ok, I have angstrom builddir here |
| 10:18.06 | Crofton|home | I'll try and post something in bugilla |
| 10:18.17 | Crofton|home | right now I am trying to get something working |
| 10:23.10 | *** join/#oe dijenerate (n=dijenera@72.51.94.113) |
| 10:23.23 | steliosk | does anyone know if the copyright notice must be added to to MIT licenced file when making changes ? As is the case with GPL files |
| 10:23.48 | steliosk | the MIT licence template does state copyright and year |
| 10:23.59 | Reneger | No one who can help me? :| |
| 10:24.02 | steliosk | http://www.opensource.org/licenses/mit-license.php |
| 10:33.06 | steliosk | it looks like it does -> http://www.xfree86.org/current/LICENSE5.html |
| 10:33.23 | CIA-3 | 03koen 07org.oe.dev * r8dce3ad8... 10/ (6 files in 4 dirs): gypsy: merge (with cleanups) from poky |
| 10:33.27 | CIA-3 | 03koen 07org.oe.dev * r5330f973... 10/ (1 conf/distro/include/sane-srcrevs.inc): sane-srcrevs: add gypsy |
| 10:36.12 | *** join/#oe cwiiis (n=cwiiis@86.159.143.156) |
| 10:42.04 | *** join/#oe pipomolo42 (n=alex@ALille-152-1-96-147.w90-18.abo.wanadoo.fr) |
| 10:44.32 | *** join/#oe Sup3rkiddo (n=sudharsh@unaffiliated/sudharsh) |
| 10:46.09 | steliosk | koen : xserver-xorg fails to build. Fails duting install -> http://rafb.net/p/pCMnhs86.html |
| 10:48.07 | steliosk | looks like a typo |
| 10:58.03 | hrw | steliosk: exactly |
| 10:59.11 | *** join/#oe pleemans (n=peter@leemanpe.ugent.be) |
| 11:00.13 | *** join/#oe Varoudis (n=varoudis@91.104.61.50) |
| 11:12.50 | *** join/#oe Longfield (n=valentin@138.131.206.172) |
| 11:15.58 | koen | steliosk: /storage/angstrom/tmp/libc/staging/i686-linux/bin/install-sh: ./-m0644 does not exist. |
| 11:16.11 | koen | steliosk: I've seen that in other packages as well, no idea what is causing that |
| 11:18.01 | hrw | install does not like -m0644 instead of '-m 0644' |
| 11:20.08 | *** join/#oe drmikecrowe (n=drmikecr@74.223.100.206.nw.nuvox.net) |
| 11:22.10 | *** join/#oe gray__ (n=santeri@213.115.166.132) |
| 11:23.05 | XorA | its because install is a shell script and uses shift to process arguments |
| 11:27.42 | koen | e-sausage: http://www.flickr.com/photos/koenkooi/1631567640/in/photostream/ |
| 11:36.52 | hrw | CIA-3: is lagged today? |
| 11:37.19 | *** join/#oe rob_w (n=bob@M9fdd.m.pppool.de) |
| 11:38.05 | Crofton|home | http://www.toytowngermany.com/lofi/index.php/t57741.html |
| 11:39.03 | *** join/#oe mb (n=mb@host231-86-dynamic.59-82-r.retail.telecomitalia.it) |
| 11:39.49 | mb | hi, I've searched around the net but I've found 0 solution! Can I install openmoko on my tytn II (kaiser)? How? |
| 11:40.48 | hrw | mb: first run linux on it |
| 11:41.17 | CIA-3 | 03ifaistos 07org.oe.dev * rc4e3261e... 10/ (3 files in 3 dirs): |
| 11:41.17 | CIA-3 | packages/linux/linux-x86-2.6.20/i486-defconfig : Make x86 kernel "generic" by building most |
| 11:41.17 | CIA-3 | things as modules |
| 11:41.17 | CIA-3 | Bump PR |
| 11:41.22 | CIA-3 | 03ifaistos 07org.oe.dev * r2e2fceb9... 10/ (3 files in 2 dirs): |
| 11:41.22 | CIA-3 | packages/xorg-xserver/xserver-xorg_1.3.0.0.bb : Fix a typo that broke xserver-xorg during |
| 11:41.22 | CIA-3 | install |
| 11:41.22 | CIA-3 | Bump PR |
| 11:41.27 | CIA-3 | 03hrw 07org.oe.dev * r62840d70... 10/ (1 packages/check/check_0.9.2.bb): check: stage pkgconfig data (from Poky) |
| 11:42.23 | CIA-3 | 03koen 07org.oe.dev * r136745c1... 10/ (1 conf/distro/include/angstrom-2007-preferred-versions.inc): angstrom-2007-preferred-versions: fix svn and mickeyl PR entries |
| 11:42.25 | mb | hrw: I didn't understod man, what does it mean? 0_o |
| 11:42.33 | CIA-3 | 03hrw 07org.oe.dev * r88309067... 10/ (1 packages/exmap-console/exmap-console_svn.bb): exmap-console: switch to SRCREV (from Poky) |
| 11:42.38 | CIA-3 | 03hrw 07org.oe.dev * rfef30695... 10/ (1 packages/exmap-console/exmap-console.inc): exmap-console require glib-2.0 (from Poky) |
| 11:43.19 | koen | eeks! |
| 11:43.21 | koen | http://rafb.net/p/nm124232.html |
| 11:43.26 | hrw | mb: tytn II is windowsmobile phone. |
| 11:43.34 | hrw | mb: openmoko is linux distro |
| 11:44.13 | hrw | mb: so first you need to run linux on tytn II, then do openmoko |
| 11:44.34 | hrw | Crofton|home: NOTE: package minimal-image-1.0-r0: task do_build: completed |
| 11:44.53 | Crofton|home | weird |
| 11:44.56 | hrw | Crofton|home: for davinci-dvevm |
| 11:45.00 | Crofton|home | I'll do some more poking |
| 11:45.15 | Crofton|home | assume_provided += git-native is also working for me |
| 11:45.18 | Crofton|home | thanks |
| 11:46.48 | mb | hrw: well, I know that...probably I'm confused but...if openmoko is a linux distro...and I need to run linux first on kaiser...I need to run openmoko on kaiser...is the same, or not? |
| 11:47.06 | steliosk | koen , hrw : xserver-xorg fails to start also |
| 11:47.20 | koen | I never used xserver-xorg from OE |
| 11:47.26 | hrw | mb: linux is kernel |
| 11:47.29 | hrw | koen: I did |
| 11:47.35 | hrw | koen: progear used it |
| 11:47.47 | steliosk | koen , hrw : avahi seems to have problems to bring the ethernet up, but doing it manually (i.e ifup eth0) works |
| 11:48.06 | koen | avahi doesn't bring up interfaces |
| 11:48.44 | mb | hrw: man, linux is a kernel, owkee...probably my english is shit...then...how to do kernel linux works on the kaiser? |
| 11:49.48 | steliosk | udhcp executes 00avahi-autoipd |
| 11:49.55 | hrw | mb: ask on #htclinux or #htc-linux (one of them) |
| 11:50.38 | koen | steliosk: udhcp also doesn't bring up a network interface |
| 11:51.07 | koen | steliosk: ifup and friends bring up and interface, udhcp and avahi run after that from ifup.d |
| 11:51.09 | steliosk | ok, let me re-phrase . Get an ip from the dhcp server |
| 11:51.40 | koen | avahi runs if you can't get an ip from dhcp |
| 11:51.44 | koen | it's a fallback |
| 11:54.09 | steliosk | well even the fallback does not work when bringing the system up. you have to do it by hand |
| 11:55.39 | steliosk | ok here are some info |
| 11:56.03 | steliosk | Starting Avahi/mDns blah blah |
| 11:56.26 | steliosk | timeout reached while waiting for return value |
| 11:57.02 | steliosk | uld not receive return value from daemon process |
| 11:57.51 | koen | ah |
| 11:57.59 | koen | I suspect that's a missing kernel feature |
| 11:58.09 | koen | netlink or something like that |
| 11:58.53 | steliosk | hmmm "Starting system message bus : Unknow group "netdev" in message bus configuration file |
| 11:59.32 | steliosk | that's udevish probably |
| 11:59.47 | koen | that's dbus |
| 12:00.39 | koen | thinks* |
| 12:02.17 | *** join/#oe Marex-notebook (n=marex@vasut.kolej.mff.cuni.cz) |
| 12:02.19 | zecke | koen: I find humans funny in general |
| 12:03.39 | koen | zecke: should bitbake crash if I put in add a bogus PREFERRED_VERSION to local.conf? |
| 12:03.58 | zecke | it should not, and IIRC there is a bug report open for it |
| 12:04.16 | koen | I keep getting: |
| 12:04.18 | koen | <PROTECTED> |
| 12:04.19 | koen | <PROTECTED> |
| 12:04.19 | koen | IndexError: string index out of range |
| 12:04.41 | koen | and bitbake refuses to tell me for what PREFERRED_VERSION that is happening |
| 12:05.37 | zecke | hehe |
| 12:10.37 | zecke | koen: is that with the 'freeze' file you are comitting to? |
| 12:11.14 | koen | zecke: yes |
| 12:11.52 | koen | zecke: http://rafb.net/p/LUWk5R96.html |
| 12:12.24 | zecke | koen: I give you a time slot at 16:30h ;) |
| 12:13.23 | koen | hmmm |
| 12:13.44 | koen | it seems to be in PREFERRED_VERSION_wireless-tools ?= "28" |
| 12:14.11 | koen | which is a valid PV |
| 12:14.13 | hrw | koen: you want 29pre not 28 |
| 12:14.39 | hrw | we probably need to add final 29 even |
| 12:21.14 | *** join/#oe Crofton (n=balister@c-24-127-39-95.hsd1.va.comcast.net) |
| 12:21.31 | *** join/#oe vivijim (n=vivijim@200.184.118.132) |
| 12:23.20 | CIA-3 | 03hrw 07org.oe.dev * r357ffb48... 10/ (3 files in 3 dirs): gnutls: drop autoconf 2.59 hack (synced from Poky) |
| 12:23.26 | CIA-3 | 03hrw 07org.oe.dev * r45df3270... 10/ (1 packages/gtk-engines/gtk-clearlooks-engine_0.6.2.bb): gtk-clearlooks-engine: fix debug packaging (from Poky) |
| 12:23.31 | CIA-3 | 03hrw 07org.oe.dev * re5c28633... 10/ (1 packages/gtkhtml2/gtkhtml2_svn.bb): gtkhtml2: change to SRCREV (from Poky) |
| 12:23.35 | CIA-3 | 03hrw 07org.oe.dev * r9551a443... 10/ (1 packages/hostap/hostap-utils_0.4.7.bb): hostap-utils: promote 0.4.7 to be default |
| 12:23.48 | CIA-3 | 03koen 07org.oe.dev * r5b73de81... 10/ (1 conf/distro/include/angstrom-2007-preferred-versions.inc): angstrom-2007-preferred-versions.inc: formatting and fixes |
| 12:26.40 | CIA-3 | 03koen 07org.oe.dev * r8731c6b5... 10/ (1 conf/distro/include/angstrom-2007-preferred-versions.inc): angstrom-2007-preferred-versions.inc: workaround bitbake bugs 'bitbake x11-image' works without bitbake choking |
| 12:30.24 | *** join/#oe russf (n=russf@host217-41-46-92.in-addr.btopenworld.com) |
| 12:45.18 | *** join/#oe Keizer (n=keizer@c-69-139-42-47.hsd1.fl.comcast.net) |
| 12:49.55 | *** join/#oe dijenerate (n=dijenera@72.51.94.113) |
| 12:59.10 | CIA-3 | 03hrw 07org.oe.dev * r1fc8e988... 10/ (1 packages/keymaps/keymaps_1.0.bb): keymaps: start after psplash (from Poky) |
| 12:59.15 | CIA-3 | 03hrw 07org.oe.dev * r6205330e... 10/ (1 site/ix86-common): site/ix86-common: removed repeated entry for ac_cv_linux_vers |
| 12:59.20 | CIA-3 | 03hrw 07org.oe.dev * r7479d49c... 10/ (4 files in 2 dirs): zlib: cleanup |
| 13:00.20 | ade|desk | koen: ah yes the famous "teh nevers[] array" |
| 13:08.58 | RP | koen: In that email do you mean there are one or two bugs? |
| 13:10.02 | *** join/#oe dcordes (n=user0815@f049002232.adsl.alicedsl.de) |
| 13:10.20 | broonie2 | Does anyone have any idea what's going on with bug 3085? |
| 13:10.29 | dcordes | hi |
| 13:11.19 | dcordes | Ho do I tell OE to rebuild the complete set of images for my device including zImage? (I removed ../deploy/images/ dir and OE is looking for the image) |
| 13:11.26 | dcordes | I tried bitbake -c rebuild x11-image |
| 13:11.29 | dcordes | doesn't work |
| 13:14.12 | hrw | dcordes: rebuild virtual/kernel and image? |
| 13:15.23 | *** join/#oe aloisiojr (n=aloisio@200.184.118.132) |
| 13:16.48 | *** join/#oe scruggs_ (n=chris@72-161-117-27.dyn.centurytel.net) |
| 13:20.37 | hrw | broonie2: I suspect that most of OE users use 4.1.x gcc |
| 13:22.48 | broonie2 | It's not the default (I'm just trying to build vanilla console-image)... will give that a spin. |
| 13:23.54 | dcordes | hrw: I'm trying to build dvb_usb support into my zaurus |
| 13:26.06 | XorA | broonie: install gfortran |
| 13:26.33 | XorA | or broonie2 install gfortran |
| 13:31.16 | broonie2 | Ah, that looks like it did the trick. |
| 13:32.25 | broonie2 | Thanks. |
| 13:34.20 | XorA | can you add that to bug |
| 13:34.37 | broonie2 | Already done. |
| 13:34.42 | *** join/#oe mhnoyes (n=mhnoyes@dialup-4.246.18.10.Dial1.SanJose1.Level3.net) |
| 13:35.25 | koen | NOTE: the following files were installed but not shipped in any package: |
| 13:35.26 | koen | NOTE: /usr/share/dates/landwater.vmf |
| 13:38.03 | dcordes | XorA: did you try dvb on your zaurus? |
| 13:38.18 | XorA | dcordes: no |
| 13:38.31 | XorA | dcordes: ABC|doc on Angstrom wanted to though |
| 13:38.47 | dcordes | I just was talking to him |
| 13:38.52 | dcordes | he has no device yet |
| 13:39.01 | dcordes | I've got dvb-t usb 2.0 here. wideview one |
| 13:39.07 | hrw | coredump tried |
| 13:39.14 | hrw | zaurus lack bandwidth |
| 13:39.20 | XorA | zecke: is the dvb master :-D |
| 13:39.20 | dcordes | hm damn |
| 13:39.38 | dcordes | I read dvb-t needs an average of 3-4 mbit/s |
| 13:39.58 | dcordes | XorA: doesn't the clamshell's usb provide more? |
| 13:40.14 | XorA | dcordes: no idea on that hardware |
| 13:40.15 | zecke | dcordes: well, a) you need a USB device with hardware pid filtering |
| 13:40.22 | XorA | dcordes: but its probably CPU bound |
| 13:40.23 | zecke | XorA: and tmbinc is the real dvb master in this channel |
| 13:40.42 | XorA | zecke: a whole master heirachy :-) |
| 13:41.09 | dcordes | good to know that the masters are present that plenty here |
| 13:42.05 | dcordes | zecke: what's pid filtering? |
| 13:42.32 | zecke | dcordes: the whole transport stream on one channel can be up to 14mbit/s |
| 13:42.45 | zecke | dcordes: if you don't filter on hardware the whole stream goes to your CPU over USB |
| 13:43.02 | dcordes | zecke: so there's a lot of crap in the signal? |
| 13:43.10 | ynezz | it's one multiplex |
| 13:43.15 | ynezz | few tv channels |
| 13:43.16 | zecke | dcordes: well, TV is crap anyway |
| 13:43.17 | dcordes | which I need to get rid off in order to realize it with usb 1.1? |
| 13:43.18 | ynezz | in one stram |
| 13:43.24 | dcordes | hah yes.... |
| 13:43.25 | ynezz | stream |
| 13:44.13 | zecke | dcordes: well you want one 'TV program' from all the available ones. |
| 13:44.22 | dcordes | zecke: which modules do I want to build to just try out? |
| 13:44.31 | *** join/#oe benlau2 (n=benlau@221.125.8.104) |
| 13:44.48 | hrw | dcordes: and one 'tv program' can contain few audio streams, applications stream etc.. |
| 13:44.49 | zecke | the linux dvb ones? |
| 13:44.53 | dcordes | my desktop system loads dvb_usb dvb_core dvb_usb_dtt200u dvb_pll |
| 13:45.11 | dcordes | is that all I need? |
| 13:45.28 | zecke | dcordes: be a hero and try it yourself? |
| 13:45.59 | zecke | i assume it is not going to work, because you will overload your USB 1.1 bus and if not decoding the mpeg2 will.... |
| 13:46.20 | dcordes | you think the zs are too slow? |
| 13:46.24 | christopher | hrw: thanks for fixing up the lmsensors. worked after I updated. |
| 13:47.38 | hrw | christopher: np |
| 13:47.55 | hrw | christopher: I fixed that bcause during oedem we needed i2c tools to hack gumstix |
| 13:49.40 | christopher | hrw: cool. yeah, right now I am trying to talk to a video decoder but it isn't responding at all. |
| 13:49.40 | dcordes | where can I find the metadata for the kernel-module* packages? |
| 13:54.30 | zecke | dcordes: bitbake virtual/kernel and see what gets build? (do a dry run...) |
| 13:56.00 | dcordes | zecke: linux-rp-2.6.22-r10. |
| 13:56.24 | zecke | dcordes: you are allowed to think, how do you find linux-rp now? |
| 13:57.20 | dcordes | I know where that is |
| 13:57.43 | dcordes | I already got to cd to that dir with my brainpower |
| 13:58.13 | zecke | ! |
| 13:58.20 | dcordes | <PROTECTED> |
| 13:59.10 | lrg | RP: small favour to ask: do you have any .fcf config files for XDB zylonite blob flash programming. We only have the M$ ones..... |
| 14:00.38 | dcordes | zecke: but how to create seperate module packages now? |
| 14:01.23 | zecke | dcordes: change the kernel config to build modules... |
| 14:02.05 | dcordes | zecke: can I achieve that with make menucofnig? |
| 14:02.10 | dcordes | menuconfig |
| 14:02.45 | zecke | dcordes: yes you can, make sure to set the right ARCH (otherwise you will use the arch of your current machine) |
| 14:04.04 | *** join/#oe birunko (n=birunko@200.184.118.132) |
| 14:04.35 | *** join/#oe mhnoyes_ (n=mhnoyes@dialup-4.246.18.46.Dial1.SanJose1.Level3.net) |
| 14:04.37 | dcordes | zecke: the result I get is the defconfig, right? |
| 14:05.05 | zecke | dcordes: well, it will be in .config and you should copy it to the defconfig used by linux-rp... |
| 14:05.53 | hrw | one day I will try them finally |
| 14:06.00 | *** join/#oe csmanx (n=csman@bas1-montreal42-1178046544.dsl.bell.ca) |
| 14:06.07 | dcordes | hrw: need! |
| 14:09.05 | gilligan_ | cbrake: around? tried adding binutils to the "minimal-image-with-mtd" .. build of binutils fails |
| 14:09.40 | gilligan_ | angstrom 2007 / uclibc / binutils-2.18 -- that should build or shouldn't it ? |
| 14:10.28 | gilligan_ | undefined reference to `frexp' |
| 14:11.12 | dcordes | zecke: so I just replace akita.defconfig with .config I created with make menuconfig (under attention of architecture)? |
| 14:11.44 | gilligan_ | http://pastebin.com/d6eebd919 -- output of the failed build |
| 14:12.36 | CIA-3 | 03hrw 07org.oe.dev * r34181b73... 10/ (3 files in 2 dirs): libxpm: add dependency on libsm (from Poky) |
| 14:12.42 | CIA-3 | 03hrw 07org.oe.dev * r15f13f23... 10/ (1 packages/wv/wv_1.2.0.bb): wv: cleanup, added missing fields (from Poky) |
| 14:16.15 | gilligan_ | openembedded.org down? |
| 14:18.39 | *** join/#oe rob_w (n=bob@M9fdd.m.pppool.de) |
| 14:19.23 | lrg | koen: I now have BF548. Will ship on Monday :) |
| 14:19.26 | *** join/#oe trj_ (n=trj@pantheon.demon.co.uk) |
| 14:19.35 | koen | lrg: great! thanks! |
| 14:19.38 | dcordes | zecke: ok I quit flooding the channel with beginner questions :) |
| 14:19.39 | *** join/#oe law|ibook (n=_law_@213.173.86.202) |
| 14:20.02 | trj_ | Does anyone know of any oe packages that build kernel modules? I'm looking for an example to copy. |
| 14:20.25 | dcordes | but one last thing. Is there no other way to create a module package but defining it in the kernel config and rebuilding the virtual/kernel? |
| 14:20.26 | lrg | koen: it even comes with gold plated USB and a 2.5in HD |
| 14:20.59 | zecke | dcordes: questions are good, as long as you don't forget to think |
| 14:21.06 | koen | lrg: yes, 40GB |
| 14:21.11 | koen | I read the manual :) |
| 14:21.23 | lrg | koen: heh, I didn't |
| 14:21.26 | zecke | dcordes: no sane one |
| 14:21.34 | *** join/#oe law|ibook (n=_law_@213.173.86.202) |
| 14:21.55 | koen | lrg: it also includes a 1GB SD card and a usb stick |
| 14:22.08 | koen | lrg: it is one sweet devboard |
| 14:22.30 | lrg | koen: sure is, although SD is 256MB on this one |
| 14:23.33 | dcordes | zecke: ok. I cannot find where to set the architecture to arm in "Processor type and features". Is that the right place to look at? |
| 14:23.54 | koen | lrg: more than enough for some uclibc image :) |
| 14:24.05 | zecke | dcordes: google for cross compiling and linux kernel |
| 14:24.11 | lrg | koen: enough for some pr0n ! |
| 14:24.30 | koen | lrg: ah, that's why they included the hd :) |
| 14:24.34 | lrg | heh |
| 14:24.45 | zecke | dcordes: e.g "make ARCH arm menuconfig" and you will find an answer |
| 14:25.04 | koen | ARCH=arm |
| 14:25.37 | zecke | koen: psst |
| 14:26.52 | koen | hrw: does libfakekey have a SRCREV in poky? |
| 14:27.00 | hrw | koen: moment |
| 14:27.13 | hrw | yes |
| 14:28.19 | *** join/#oe law|ibook (n=_law_@213.173.86.202) |
| 14:28.48 | *** join/#oe Crofton (n=balister@c-24-127-39-95.hsd1.va.comcast.net) |
| 14:29.12 | koen | matchbox keyboard looks a lot better now with the increased contrast |
| 14:29.22 | koen | sadly it doesn't fit on the neo screen anymore... |
| 14:29.26 | hrw | koen: OE also have srcrev now |
| 14:29.43 | christopher | hrw: so, when you used i2cdetect, did you have a lot of addresses show up as available? I only see 1 address as UU that I have already defined and most have their number by them. |
| 14:30.04 | hrw | christopher: I did not used it |
| 14:31.09 | *** join/#oe AvengerMoJo (n=alex@219.142.235.251) |
| 14:31.32 | christopher | hrw: ok. |
| 14:33.01 | dcordes | zecke: koen is that all I need to set? Doesn't OE configure the hell out of the kernel before the akita.defconf is ready? |
| 14:34.23 | *** join/#oe woglinde (i=woglinde@e178080071.adsl.alicedsl.de) |
| 14:35.21 | zecke | dcordes: there is plenty of documentation on how to configure a kernel, read that |
| 14:35.43 | zecke | dcordes: OE assumes that you have a config file, it is not there to create one for you |
| 14:36.27 | dcordes | zecke: it only applies all those patches eh? |
| 14:36.45 | woglinde | dcordes yes and build the kernel packages and module |
| 14:37.55 | dcordes | can't I run make menuconfig with the basic configuration which is already there so I don't have to put all that stuff like arch? (I mean OE has to have that/do that somehow, doesn't it)? |
| 14:38.05 | *** join/#oe jsheldon (n=jim@c-24-63-101-228.hsd1.ma.comcast.net) |
| 14:38.23 | zecke | dcordes: bitbake -cconfigure virtual/kernel? |
| 14:38.37 | zecke | dcordes: then switch to the ${WORKDIR} of linux-rp? |
| 14:38.46 | koen | bitbake -c menuconfig? |
| 14:38.56 | Shoragan | there is a menuconfig task? |
| 14:39.15 | dcordes | zecke: does that output akita.defconfig or .config in the kerneldir? |
| 14:39.41 | koen | Shoragan: yes |
| 14:39.49 | zecke | bitbake -clisttasks virtual/kernel |
| 14:39.50 | koen | Shoragan: since two weeks or so |
| 14:39.58 | Shoragan | koen, nice :) |
| 14:40.26 | dcordes | I'm confused. Shall I use -c configure or -c menuconfig now? |
| 14:40.43 | koen | Shoragan: http://rafb.net/p/yGht8d46.txt |
| 14:40.54 | Shoragan | is there a way do ask bitbake for easily a parseable dependency tree? |
| 14:41.05 | koen | -g ? |
| 14:41.52 | Shoragan | ah :) |
| 14:42.15 | zecke | Shoragan: it is using the graphiv dot format, but "dot" takes ages to generate a nice graphic |
| 14:42.43 | Shoragan | i just need the information, not a graphic |
| 14:44.24 | koen | s/iv/viz/ |
| 14:49.14 | steliosk | koen : https://bugzilla.redhat.com/show_bug.cgi?id=219269 |
| 14:49.32 | Crofton | send em to gitmo! |
| 14:51.12 | CIA-3 | 03hrw 07org.oe.dev * r9586876c... 10/ (1 packages/libfakekey/libfakekey_svn.bb): libfakekey: switch to SRCREV (from Poky) |
| 14:51.26 | CIA-3 | 03hrw 07org.oe.dev * r8e58275d... 10/ (1 packages/sysfsutils/sysfsutils_2.0.0.bb): sysfsutils: split libsysfs to separate package (with dev and dbg ones) (from Poky) |
| 14:54.38 | Shoragan | mwester, is that script available somewhere? |
| 14:57.36 | *** join/#oe CosmicPenguin (n=nobody@163.181.251.103) |
| 14:59.43 | chouimat | morning |
| 15:01.44 | mwester | Shoragan: http://www.pastebin.ca/742449 |
| 15:02.05 | Shoragan | thanks |
| 15:02.06 | mwester | That's the most generic one -- I usually just grep the output from that script |
| 15:03.33 | Shoragan | ah |
| 15:04.42 | *** join/#oe TheCan (n=thecan@dslb-084-056-134-027.pools.arcor-ip.net) |
| 15:05.29 | *** join/#oe woglinde (i=woglinde@e178080071.adsl.alicedsl.de) |
| 15:06.56 | *** join/#oe HopsNBarley (n=hops@nslu2-linux/HopsNBarley) |
| 15:07.16 | *** join/#oe mr_nice (n=mr_nice@83-215-11-13.stadt.dyn.salzburg-online.at) |
| 15:07.33 | woglinde | hi mr_nice |
| 15:07.40 | mr_nice | woglinde: hi |
| 15:13.14 | *** join/#oe benlau3 (n=benlau@221.125.8.104) |
| 15:16.54 | hrw | mwester: http://www.pastebin.ca/742463 is better perl version (by Ebassi from OH) |
| 15:22.43 | *** join/#oe summatusmentis (n=summatus@umm-yrless170.morris.umn.edu) |
| 15:24.05 | cdbot2 | * * OE Bug 3178 has been created by tobias.pflug(AT)gmx.net |
| 15:24.06 | cdbot2 | * * binutils 2.18 / uclibc : linking error |
| 15:24.08 | cdbot2 | * * http://bugs.openembedded.org/show_bug.cgi?id=3178 |
| 15:25.31 | hrw | bye |
| 15:31.29 | CIA-3 | 03xora 07org.oe.dev * r6ad6f2ba... 10/ (5 files in 3 dirs): |
| 15:31.29 | CIA-3 | packages/openmoko2/openmoko-appearance_svn.bb : add appearance an application |
| 15:31.29 | CIA-3 | to edit appearence params |
| 15:31.33 | CIA-3 | 03hrw 07org.oe.dev * r3b383ec1... 10/ (3 files in 2 dirs): sato-icon-theme: sync with Poky |
| 15:31.41 | CIA-3 | 03hrw 07org.oe.dev * re0fcc3e1... 10/ (1 packages/libxml/libxml2_2.6.29.bb): libxml2: drop useless note |
| 15:34.27 | XorA | hrw|gone: planning on adding a SRCREV for libfakekey? |
| 15:34.37 | *** join/#oe benlau2 (n=benlau@221.125.8.104) |
| 15:34.50 | koen | hrw|gone: |
| 15:34.52 | koen | -PV = "0.2+svn${SRCDATE}" |
| 15:34.53 | koen | +PV = "0.0+svnr${SRCREV}" |
| 15:35.00 | koen | hrw|gone: that doesn't look right |
| 15:35.39 | XorA | and they havent even started yet |
| 15:36.01 | hrw|gone | koen: ops |
| 15:37.05 | koen | XorA: http://rafb.net/p/GyKUSu84.html |
| 15:37.23 | hrw|gone | pushing fix |
| 15:38.16 | hrw|gone | bye |
| 15:41.41 | CIA-3 | 03hrw 07org.oe.dev * r30935138... 10/ (1 packages/libfakekey/libfakekey_svn.bb): libfakekey: bump PV to 0.2 |
| 15:42.42 | *** join/#oe mickeyl (n=mickeyl@122-124-83-32.dynamic.hinet.net) |
| 15:45.50 | *** join/#oe Sup3rkiddo (n=sudharsh@unaffiliated/sudharsh) |
| 15:54.09 | *** join/#oe benlau3 (n=benlau@221.125.8.104) |
| 15:55.32 | nud | did someone try to compile libx264 for ARM on OE ? |
| 15:56.59 | *** join/#oe hillct (n=H@cpe-024-211-242-232.nc.res.rr.com) |
| 15:57.30 | XorA | nud: not yet, but I plan to |
| 15:58.08 | nud | XorA: cool |
| 15:58.12 | nud | I need it too ;-) |
| 15:58.22 | XorA | nud: I want mediatomb and fuppes in OE eventually |
| 15:58.41 | nud | is there an assembler available in OE ? |
| 15:58.57 | nud | on x86 it complains like this: |
| 15:59.02 | nud | No suitable assembler found. x264 will be several times slower. |
| 15:59.36 | XorA | nud: does it conatin ARM asm? |
| 16:00.10 | nud | well on ARM there is no "suitable assembler" defined |
| 16:00.44 | nud | I guess/hope there is a fallback code for ASM parts |
| 16:01.03 | nud | there is no arm-specific part |
| 16:01.51 | nud | <PROTECTED> |
| 16:01.51 | nud | <PROTECTED> |
| 16:01.51 | nud | <PROTECTED> |
| 16:01.51 | nud | <PROTECTED> |
| 16:01.53 | nud | in the main code |
| 16:02.02 | XorA | nud: probably fallback code, but I guess some assebmler wizz needs to look into optimising x264 for arm |
| 16:02.15 | nud | yep |
| 16:02.27 | nud | ah that asm bit is hidden behind a #ifdef |
| 16:02.30 | XorA | ipod video playing would be nice |
| 16:07.44 | *** join/#oe sudharsh_ (n=sudharsh@59.92.39.234) |
| 16:08.12 | *** join/#oe Varoudis_ (n=varoudis@91.106.58.121) |
| 16:09.24 | nud | are there existing receipts for proprietary packages ? (randomly, IPP) |
| 16:10.30 | *** join/#oe dijenerate (n=dijenera@72.51.94.113) |
| 16:10.36 | mickey|tw | look in binary-only |
| 16:10.38 | mickey|tw | or firmware |
| 16:12.27 | koen | XorA: mediatomb is in OE already :) |
| 16:12.32 | XorA | nud: I once started IPP but I got bored when mplayer improved to no really need it |
| 16:12.43 | CIA-3 | 03xora 07org.oe.dev * r72dbc16d... 10/ (1 conf/distro/include/sane-srcrevs.inc): conf/distro/include/sane-srcrevs.inc : rev bump settings-demon |
| 16:12.48 | koen | XorA: jin^eld is a(the?) mediatomb developer |
| 16:12.48 | XorA | koen: excellent, that saves hassle then |
| 16:12.58 | koen | hey mickey|tw |
| 16:13.03 | mickey|tw | evening koen |
| 16:13.05 | koen | mickey|tw: fire-fighting done? |
| 16:13.18 | mickey|tw | koen: no. this will start on monday |
| 16:14.00 | *** join/#oe zap (n=zap@16.170.249.ozerki.net) |
| 16:14.24 | koen | XorA: http://ewi546.ewi.utwente.nl/tmp/srcrevs.patch as of this morning works on my neo |
| 16:14.28 | koen | FYI |
| 16:15.56 | XorA | koen: eh! |
| 16:16.58 | XorA | why comment out all openmoko versions? |
| 16:17.51 | *** join/#oe pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 16:18.38 | *** join/#oe fugazy (n=chatzill@AVelizy-152-1-34-22.w82-120.abo.wanadoo.fr) |
| 16:19.36 | *** join/#oe greentux (n=lemke@Z766e.z.pppool.de) |
| 16:29.29 | *** join/#oe jsheldon (n=jim@c-24-63-101-228.hsd1.nh.comcast.net) |
| 16:30.08 | *** join/#oe tomimo (n=kurre@a193-229-227-182.elisa-laajakaista.fi) |
| 16:43.04 | cdbot2 | * * OE Bug 3179 has been created by skoroneos(AT)digital-opsis.com |
| 16:43.06 | cdbot2 | * * dbus fails to start on x86/Angstrom |
| 16:43.08 | cdbot2 | * * http://bugs.openembedded.org/show_bug.cgi?id=3179 |
| 16:43.53 | *** join/#oe HopsNBarley_ (n=hops@pool-71-116-93-90.snfcca.dsl-w.verizon.net) |
| 16:48.29 | *** join/#oe viviji1 (n=vivijim@200.184.118.132) |
| 16:57.20 | koen | XorA|gone: to use the latest svn revicions |
| 17:04.40 | *** part/#oe ade|desk (n=adavey@194.200.143.249) |
| 17:05.57 | *** join/#oe Timelord (n=TL@16.8c.d12c.cidr.airmail.net) |
| 17:08.21 | *** join/#oe tomimo (n=kurre@a193-229-227-182.elisa-laajakaista.fi) |
| 17:08.57 | *** join/#oe dfoley (n=dfoley@s142-179-108-133.bc.hsia.telus.net) |
| 17:12.43 | Henryk | hmm, why does libfakekey try to fetch svn revision 1? |
| 17:14.00 | *** join/#oe rob_w (n=bob@M9fdd.m.pppool.de) |
| 17:16.39 | *** join/#oe chouimat (n=dieu@r2351064.cidc.net) |
| 17:20.17 | *** join/#oe Darth_Wa1er (n=zathras@vorphalack.dialup.corbina.ru) |
| 17:21.15 | *** join/#oe chouimat (n=dieu@r2351064.cidc.net) |
| 17:22.27 | *** join/#oe tomimo (n=kurre@a193-229-227-182.elisa-laajakaista.fi) |
| 17:22.27 | CIA-3 | 03florian 07org.oe.dev * r83cf3f45... 10/ (1 packages/gpephone/linphone_1.5.0.bb): linphone: Make sure 1.5.0 does not use -Werror which is going to break. |
| 17:26.56 | *** join/#oe khem (i=khem@nat/montavista/x-891b6dc3b835c531) |
| 17:28.49 | *** join/#oe chouimat|nap (n=dieu@r2351064.cidc.net) |
| 17:33.16 | *** join/#oe Bernardo (n=Bernardo@89.181.65.73) |
| 17:33.56 | *** join/#oe likewise (n=Leon_Woe@82-171-189-134.dsl.ip.tiscali.nl) |
| 17:33.59 | likewise | hi all |
| 17:34.42 | Tartarus | Hmm |
| 17:34.43 | likewise | No Packages file was generated during my bitbake minimal-image, I would expect it to appear as build/tmp/deploy/glibc/ipk/ppce300c3/Packages. How can I debug this? |
| 17:34.49 | Tartarus | Is there a package today that has 2 source archives? |
| 17:35.09 | Tartarus | I've got 2 upstream tarballs, that uncompress to '.' rather than 'pkgname', and need them both in the same dir |
| 17:35.44 | likewise | Tartarus: hmm, maybe mv them during a task. |
| 17:37.08 | Tartarus | aw, damn. was hoping for something easier :) |
| 17:37.09 | Tartarus | thanks |
| 17:42.44 | *** join/#oe Marex (n=Marex@gwfm4-3-206.802.cz) |
| 17:47.32 | likewise | Tartarus: there might be something easier that I don't know about. |
| 17:50.18 | *** join/#oe csmanx (n=csman@bas1-montreal42-1178046544.dsl.bell.ca) |
| 17:50.46 | koen | likewise: I suspect ppce300c3 isn't in PACKAGE_EXTRA_ARCHS |
| 17:51.03 | *** join/#oe Robwoerle (n=bob@M9fdd.m.pppool.de) |
| 17:51.35 | koen | likewise: rootfs.bbclass basically does 'for i in PACKAGE_EXTRA_ARCHS ;do ipkg_do_index ;done' |
| 17:51.51 | *** join/#oe Zero_Chaos (n=zero@71.60.239.40) |
| 17:52.56 | likewise | koen: that was it, I just noticed this in the output. thanks. |
| 17:53.55 | koen | one of the reasons why I split up deploy, to make things like that more apparent |
| 17:56.37 | *** join/#oe summatusmentis (n=summatus@umm-yrless170.morris.umn.edu) |
| 17:59.11 | likewise | Just wondering, does it make sense to have a rootfs_tar.class (Like when no run-time package manager is needed)? |
| 17:59.37 | koen | tar files have no dependency info |
| 17:59.58 | koen | the 'better' was is just to remove *ipkg* in IMAGE_POST_PROCESS_CMD |
| 18:00.05 | koen | (or *deb*) |
| 18:00.33 | likewise | koen: yes, and remove the ipkg depency in the rootfs_ipk.class, which is what I now sometimes do. |
| 18:00.56 | koen | if you rm it anyway, you can keep the dep |
| 18:00.57 | likewise | Remove ipkg from RDEPENDS, and PACKAGE_INSTALL |
| 18:02.04 | likewise | koen: It should DEPENDS on ipkg-native and RDEPENDS on ipkg, AFAICS |
| 18:02.22 | koen | not really |
| 18:02.43 | koen | there's a valid use-case for having no ipkg binary in the system, but keeping the metadata |
| 18:08.17 | likewise | koen: agreed, in my case I even want to get rid of the on-target metadata. |
| 18:09.51 | *** join/#oe russf (n=russf@host86-151-128-117.range86-151.btcentralplus.com) |
| 18:10.24 | koen | right, that should be done in a post-process command |
| 18:10.33 | koen | since you need the metadata to populate the rootfs |
| 18:10.39 | koen | and run offline post isntall scripts |
| 18:16.36 | koen | ah, the openmoko dialer app has a new feature |
| 18:16.48 | koen | "unable to accept incoming calls" |
| 18:16.54 | koen | no way to turn it off, though |
| 18:17.47 | *** join/#oe mgross (i=mgross@nat/intel/x-cf432f0d5cc4614e) |
| 18:18.08 | *** join/#oe jbs (n=Bernardo@89-180-12-193.net.novis.pt) |
| 18:23.00 | dcordes | mmcqd is soaking up 30% of akita's cpu time when I scp stuff onto its SD. Is that normal? |
| 18:24.17 | koen | yes |
| 18:25.04 | dcordes | how fast can it write to SD? |
| 18:25.21 | *** join/#oe Crofton (n=balister@hc65215cf.dhcp.vt.edu) |
| 18:27.29 | *** join/#oe Marex (n=Marex@gwfm4-3-206.802.cz) |
| 18:31.28 | CIA-3 | 03xora 07org.oe.dev * raa36aa92... 10/ (3 files in 2 dirs): sane-srcrevs.inc : add libfakekey |
| 18:35.44 | *** join/#oe pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 18:36.47 | *** join/#oe jsheldon (n=jim@c-24-63-101-228.hsd1.nh.comcast.net) |
| 18:39.38 | Tartarus | no |
| 18:39.40 | Tartarus | ga |
| 18:42.11 | dcordes | koen: copying stuff directly remotely onto sd is 3x slower than copying into internal flash. Is it because mmcqd is slowing down the system? |
| 18:42.24 | dcordes | or better said could it be possible |
| 18:44.09 | *** join/#oe timtimred (n=On3@82-34-50-106.cable.ubr02.chel.blueyonder.co.uk) |
| 18:59.29 | *** join/#oe Marex (n=Marex@gwfm4-3-0-22.802.cz) |
| 19:00.44 | *** join/#oe summatusmentis (n=summatus@umm-yrless170.morris.umn.edu) |
| 19:01.36 | *** join/#oe memenarsil (n=memeruiz@e176227236.adsl.alicedsl.de) |
| 19:10.23 | *** join/#oe aCiDBaSe (n=osantana@200.184.118.132) |
| 19:16.10 | *** join/#oe hufnus (n=slonsiki@69-12-177-67.dsl.static.sonic.net) |
| 19:20.59 | *** part/#oe hufnus (n=slonsiki@69-12-177-67.dsl.static.sonic.net) |
| 19:22.22 | *** join/#oe hufnus (n=slonsiki@69-12-177-67.dsl.static.sonic.net) |
| 19:23.20 | *** part/#oe hufnus (n=slonsiki@69-12-177-67.dsl.static.sonic.net) |
| 19:25.13 | *** join/#oe csmanx (n=csman@74.12.205.10) |
| 19:28.02 | koen | cbrake: you need to patch bitbake as outlined on the mailinglist |
| 19:32.59 | *** join/#oe frank7d (n=afs@p549F0F70.dip0.t-ipconnect.de) |
| 19:40.57 | CIA-3 | 03likewise 07org.oe.dev * r43f3932c... 10/ (1 conf/machine/efika.conf): efika: Trivial typo fix. |
| 19:41.08 | CIA-3 | 03likewise 07org.oe.dev * r55a31408... 10/ (1 conf/machine/mpc8313e-rdb.conf): mpc8313e-rdb: Fix PACKAGE_EXTRA_ARCHS and SERIAL_CONSOLE. |
| 19:48.22 | *** join/#oe |dion| (n=dion@inhex.net) |
| 19:49.12 | CIA-3 | 03koen 07org.oe.dev * r22aae37c... 10/ (7 files in 2 dirs): packages/openmoko2: s:distribution:framework:g |
| 19:49.18 | CIA-3 | 03koen 07org.oe.dev * rbc72cbe4... 10/ (1 conf/distro/include/angstrom-2007-preferred-versions.inc): (log message trimmed) |
| 19:49.18 | CIA-3 | angstrom-preferred-versions: remove more entries, bitbake -s gets now as far as: |
| 19:49.18 | CIA-3 | httppc 0:0.8.5-r0 0:.-8 |
| 19:49.18 | CIA-3 | htun 0:0.9.5-r0 0:.-9 |
| 19:49.18 | CIA-3 | hugs 0:hugs98-Nov2003-r2 |
| 19:49.21 | CIA-3 | Traceback (most recent call last): |
| 19:49.23 | CIA-3 | <PROTECTED> |
| 19:54.59 | khem | where do I find the code where bb fetches the source tars |
| 20:00.13 | *** join/#oe gremlin[it] (n=gremlin@217.202.58.242) |
| 20:04.41 | likewise | khem: bitbake/lib/bb/fetch/ in bitbake |
| 20:05.29 | *** join/#oe mhnoyes (n=mhnoyes@dialup-4.246.18.139.Dial1.SanJose1.Level3.net) |
| 20:07.05 | khem | likewise: thanks |
| 20:07.26 | khem | likewise: I am looking on how glibc sources (tars) are fetched |
| 20:08.38 | likewise | khem: I have never looked at the fetcher code. Is there anything specific you would like to learn? |
| 20:09.13 | khem | how it fetches the tars |
| 20:09.25 | *** join/#oe _diego__ (n=diego@host-84-223-114-184.cust-adsl.tiscali.it) |
| 20:10.21 | Tartarus | classes/base.bbclass, do_fetch |
| 20:10.41 | Tartarus | but that's just kinda wrapper to bitbake's lib/bb/fetch/ |
| 20:10.44 | Tartarus | or fetcher/, i forget |
| 20:12.38 | khem | Tartarus: yeah that's the one |
| 20:14.08 | khem | Currently rootfs created is owned by current user/group. If we try to nfs boot it then it does not boot I have to manually do a chown on whole rootfs tree |
| 20:15.33 | Tartarus | really? odd |
| 20:15.43 | Tartarus | looking at the direct dir or the .tgz ? |
| 20:16.16 | khem | direct dir |
| 20:16.31 | khem | tar should have added --owner=0 --group=0 |
| 20:16.37 | khem | probably |
| 20:17.10 | likewise | khem: rootfs created where? in build/tmp/rootfs? |
| 20:17.10 | Tartarus | yeah |
| 20:19.30 | koen | doesn't adding norootsquash to your nfs server solve that problem? |
| 20:21.04 | Crofton | anyone here know anything about how to create MTD partitions for NAND flash for a new board? |
| 20:21.53 | koen | afaik either map in the kernel or via CMDLINE |
| 20:22.19 | Tartarus | that's a diff problem |
| 20:22.31 | Tartarus | khem is saying the rootfs he's trying to use has bad perms on the host side |
| 20:29.24 | kergoth | hrm |
| 20:32.22 | *** join/#oe gilligan_ (n=gilligan@p549AAE7F.dip0.t-ipconnect.de) |
| 20:32.23 | gilligan_ | hi |
| 20:33.20 | *** join/#oe stevenh (n=lews@65.167.23.2) |
| 20:38.48 | HopsNBarley_ | hi Crofton - won't redboot do that? (if you tell it to via the "fis" commands) |
| 20:39.03 | Crofton | this is for a new borad |
| 20:39.05 | Crofton | board |
| 20:39.16 | HopsNBarley_ | don't have a loader yet? |
| 20:40.21 | *** join/#oe dijenerate (n=dijenera@72.51.94.113) |
| 20:40.24 | Crofton | u-boot |
| 20:40.35 | Crofton | but I think I need to define the partitions in the kernel |
| 20:48.43 | khem | yeah as Tartarus mentioned it's the permission on the host side |
| 20:53.36 | *** join/#oe Marex (n=Marex@gwfm4-3-0-253.802.cz) |
| 20:53.42 | *** join/#oe csmanx (n=csman@74.12.205.10) |
| 20:56.23 | HopsNBarley_ | Crofton, if the kernel is compiled with CONFIG_MTD_REDBOOT_PARTS (and friends) it will look for a FIS partition area, and use that - thereby avoiding the hassle of statically defining these in the kernel. |
| 20:56.52 | koen | CMDLINE should work as well |
| 20:57.00 | Crofton | hmmm |
| 20:57.10 | koen | (never tried it, but people keep telling me it works) |
| 20:57.32 | HopsNBarley_ | anybody working with the i.MX21, 27, 31? i'm trying to speak with the internal bootstrap loader, but it is pretty stupid... |
| 20:59.43 | HopsNBarley_ | koen - that requires CONFIG_MTD_CMDLINE_PARTS (a great tip, thanks!) |
| 21:04.05 | *** join/#oe Ghiottone (n=ale@host2-206-dynamic.19-79-r.retail.telecomitalia.it) |
| 21:05.09 | *** join/#oe csmanx (n=csman@74.12.205.10) |
| 21:06.22 | Ghiottone | hello |
| 21:07.25 | Ghiottone | I am working on a package and would like it to include qte. I have problems as the include files are not found |
| 21:07.45 | Ghiottone | isn't a DEPENDS="qte" setting enough? |
| 21:10.42 | gilligan_ | oops.. bugzilla down ? |
| 21:10.45 | gilligan_ | mysql error |
| 21:14.33 | likewise | koen, HopsNBarley_: we have a small patch that allows us to do "root=/dev/mtdblock@partitionname" to add extra dynamic. |
| 21:16.14 | *** join/#oe svolpe_gerrath (n=Gerrath_@unaffiliated/gerrath) |
| 21:28.32 | Ghiottone | any suggestion for me? |
| 21:37.25 | cbrake | koen: thanks for the AUTOREV patch suggestion -- that worked |
| 21:41.08 | Ghiottone | is the autorev patch going into bitbake? |
| 21:41.50 | *** join/#oe ggilbert (n=ggilbert@tinman.treke.net) |
| 21:45.35 | HopsNBarley_ | any objection to pushing a newer version of libpixman? i couldn't get xserver-kdrive to build without it. |
| 21:47.07 | likewise | HopsNBarley_: Sure. Is the version considered "latest stable" upstream? If not, please set DEFAULT_PREFERENCE to -1 . |
| 21:54.16 | *** join/#oe Marex (n=Marex@gwfm4-3-250.802.cz) |
| 22:02.31 | *** join/#oe florian (n=fuchs@f048226105.adsl.alicedsl.de) |
| 22:03.05 | florian | re |
| 22:04.45 | likewise | wb |
| 22:09.49 | HopsNBarley_ | likewise, ah, perfect. thanks. |
| 22:12.42 | *** join/#oe scruggs (n=chris@72-161-114-6.dyn.centurytel.net) |
| 22:36.54 | *** join/#oe Zero_Chaos (n=zero@c-71-60-239-40.hsd1.pa.comcast.net) |
| 22:37.12 | CIA-3 | 03likewise 07org.oe.dev * rc9cff326... 10/ (4 files in 4 dirs): linux-2.6.23: Added mpc8313e-rdb with defconfig. |
| 22:53.39 | *** join/#oe mhnoyes (n=mhnoyes@dialup-4.246.18.155.Dial1.SanJose1.Level3.net) |
| 23:05.27 | *** join/#oe bluelightning (n=blueligh@219-89-45-95.dialup.xtra.co.nz) |
| 23:07.16 | *** join/#oe pierrelux (n=pierre-l@74.210.144.125) |
| 23:18.15 | *** join/#oe aloisiojr (n=aloisio@189.70.1.141) |
| 23:18.32 | *** join/#oe pipomolo42 (n=alex@ALille-152-1-61-38.w83-198.abo.wanadoo.fr) |
| 23:35.00 | *** part/#oe vivijim (n=vivijim@200.184.118.132) |