| 00:05.19 | drmikecrowe | Anybody using coLinux here to compile OE? |
| 00:43.30 | *** join/#oe Laibsch (n=Laibsch@p54B95677.dip.t-dialin.net) |
| 00:45.49 | *** join/#oe heinz_ (i=realy@p5495DB99.dip.t-dialin.net) |
| 00:46.09 | *** join/#oe wrobbie (n=rob@cm203.kappa85.maxonline.com.sg) |
| 01:07.34 | *** join/#oe noclouds (n=mhfan@218.22.26.90) |
| 01:13.11 | *** join/#oe Laibsc1 (n=Laibsch@p54B9622C.dip.t-dialin.net) |
| 01:14.16 | *** join/#oe mr (n=mr_nice@p54A9D53D.dip.t-dialin.net) |
| 02:13.17 | *** join/#oe benlau (n=benlau@221.125.8.107) |
| 02:14.09 | *** join/#oe memeruiz__ (n=memeruiz@M8055.m.pppool.de) |
| 02:21.59 | *** join/#oe vivijim (n=vivijim@189.13.173.128) |
| 02:22.32 | *** part/#oe vivijim (n=vivijim@189.13.173.128) |
| 02:26.33 | *** join/#oe AvengerMoJo (n=alex@61.14.130.209) |
| 02:40.50 | *** join/#oe NAbyss (n=foo@ppp121-44-236-95.lns2.mel4.internode.on.net) |
| 03:04.18 | *** join/#oe AvengerMoJo (n=alex@61.14.130.209) |
| 03:07.56 | *** join/#oe univac (n=univac@148.81.191.193) |
| 03:25.51 | *** join/#oe Laibsch (n=Laibsch@p54B95950.dip.t-dialin.net) |
| 04:43.04 | *** join/#oe summatusmentis (n=summatus@216.17.28.226.ip.usinternet.com) |
| 05:37.25 | *** join/#oe _law_ (n=law@mail.stiftadmont.at) |
| 05:46.56 | Zero_Chaos | If anyone is awake, I am trying to remove -msoft-float from the CFLAGS for a specific .bb; I know the benefits of EABI include being able to mix hard and soft float, so I really need to do this. |
| 06:10.19 | *** join/#oe _law_ (n=law@mail.stiftadmont.at) |
| 06:22.14 | *** join/#oe rob_w|laptop (n=rob_w@p549BB2A9.dip0.t-ipconnect.de) |
| 06:23.12 | *** join/#oe polyonymous (n=hacker@pD9539360.dip0.t-ipconnect.de) |
| 06:27.11 | *** join/#oe __law__ (n=law@mx2.stiftadmont.at) |
| 06:28.17 | *** join/#oe __law__ (n=law@mx2.stiftadmont.at) |
| 06:29.10 | *** join/#oe __law__ (n=law@mail.stiftadmont.at) |
| 06:30.57 | *** join/#oe zap (n=zap@16.170.249.ozerki.net) |
| 06:32.05 | *** join/#oe Any_Key (n=Any_Key@rt94.highlink.ru) |
| 06:32.19 | Any_Key | Hi there |
| 06:35.16 | Any_Key | there is something wrong in all cups *.bb files SRC_URI = "ftp://ftp3.easysw.com/pub/cups/${PV}/cups-${PV}-source.tar.bz2 wrong it might be just SRC_URI = "ftp://ftp.easysw.com/pub/cups/${PV}/cups-${PV}-source.tar.bz2 |
| 06:44.25 | *** join/#oe bluelightning (n=blueligh@219-89-45-99.dialup.xtra.co.nz) |
| 06:49.22 | *** join/#oe tank17 (i=ariel@gateway/tor/x-4e8c2b1161c85ffd) |
| 06:52.28 | *** join/#oe zecke (n=ich@88.134.98.145) |
| 06:56.05 | *** join/#oe steliosk (n=Stelios@ipa226.211.tellas.gr) |
| 07:04.07 | *** join/#oe rob_w|lappi (n=rob_w@p549BB2A9.dip0.t-ipconnect.de) |
| 07:05.04 | cdbot2 | * * OE Bug 2666 has been RESOLVED (FIXED) by joaquinduran(AT)adtelecom.es |
| 07:05.06 | cdbot2 | * * Error while building the library libsigc++-2.0.17 |
| 07:05.08 | cdbot2 | * * http://bugs.openembedded.org/show_bug.cgi?id=2666 |
| 07:16.19 | *** join/#oe _diego_ (n=diego@host-84-222-15-94.cust-adsl.tiscali.it) |
| 07:16.39 | *** join/#oe koen (n=koen@dominion.kabel.utwente.nl) |
| 07:26.37 | *** join/#oe rob_w|laptop (n=rob_w@p549BB2A9.dip0.t-ipconnect.de) |
| 07:41.57 | hrw | morning |
| 07:43.15 | koen | hey hrw |
| 07:43.43 | hrw | hi allmighty |
| 07:43.58 | koen | ? |
| 07:45.58 | hrw | I read today mail and thats result |
| 07:46.32 | koen | mail? |
| 07:47.24 | koen | o, that |
| 07:50.23 | hrw | a-d.org/mw/ == 404 now |
| 07:52.39 | XorA | morning |
| 07:53.18 | koen | hey XorA |
| 07:54.49 | XorA | hey koen |
| 07:55.01 | XorA | koen: gonna email me that key then? |
| 08:25.27 | CIA-3 | 03koen 07org.oe.dev * rf4e48357... 10/ (1 packages/python/python-pyqt_3.13.bb): python-pyqt3: fix PR |
| 08:26.14 | *** join/#oe RP (i=1000@tim.rpsys.net) |
| 08:26.17 | *** join/#oe jonb (n=jonb@cpc5-lanc4-0-0-cust628.brig.cable.ntl.com) |
| 08:30.15 | *** join/#oe ade|desk (n=adavey@194.200.143.249) |
| 08:40.21 | *** join/#oe Any_Key (n=Any_Key@rt94.highlink.ru) |
| 08:44.08 | *** join/#oe benlau (n=benlau@221.125.8.107) |
| 08:46.03 | *** join/#oe xjqian (n=gordon@24-107-186-86.dhcp.stls.mo.charter.com) |
| 09:00.27 | *** join/#oe shpchp (n=shpchp@220.114.28.33) |
| 09:00.38 | *** part/#oe shpchp (n=shpchp@220.114.28.33) |
| 09:03.34 | *** join/#oe zecke (n=ich@dsl-62-220-14-162.berlikomm.net) |
| 09:08.00 | keesj | Hi |
| 09:10.59 | keesj | XorA: are you at work? |
| 09:11.23 | keesj | I did not manage to get a fully working openocd :P |
| 09:12.46 | *** join/#oe florian (n=fuchs@217.146.132.69) |
| 09:13.12 | XorA | hey florian |
| 09:13.33 | florian | good morning |
| 09:13.45 | jonb | florian : Hi |
| 09:14.26 | jonb | florian, koen suggests I talk to you about the netbook pro |
| 09:14.55 | hrw | morning florian |
| 09:15.00 | hrw | but rather not good |
| 09:15.52 | florian | jonb: ah yes, you sent me an email right? |
| 09:16.00 | jonb | yep |
| 09:16.11 | jonb | and Philippe too |
| 09:16.50 | jonb | I am Jon Bradbury / dr_zee |
| 09:19.08 | jonb | my immediate objectives are a) get a 2.6.17 kernel running on it (have 2.6.9 right now but it doesn't work with the Angstrom images) and b) define a procedure to get the machine back to WinCE 4.2. |
| 09:19.30 | jonb | This means owners can try Linux without fear of it being a one way street. |
| 09:20.46 | jonb | The key is knowledge of the bootloader and memory partition requirements for WinCE. The 404 image (on Psion website) doesn't repartition the NAND, it just upgrades PCon, Boost and WinCE (although it does do nand ecc) |
| 09:24.03 | *** join/#oe koen (n=koen@dominion.kabel.utwente.nl) |
| 09:25.06 | *** join/#oe jan_js (n=Elive_us@pD953A0CD.dip0.t-ipconnect.de) |
| 09:25.13 | jan_js | morning ! |
| 09:26.58 | *** part/#oe xjqian (n=gordon@24-107-186-86.dhcp.stls.mo.charter.com) |
| 09:28.04 | jonb | koen, I am talking to florian |
| 09:28.21 | koen | jonb: great |
| 09:28.28 | koen | florian knows stuff :) |
| 09:30.26 | *** join/#oe psokolovsky (n=psokolov@82.193.99.26) |
| 09:30.32 | jonb | koen : he's pointed me to ~anonymous |
| 09:31.56 | jan_js | hi psokolovsky |
| 09:32.56 | jan_js | psokolovski: When you commented on my bug (h 3900 ..) did you mean to use altboot to make the SD boot ? |
| 09:33.23 | jan_js | psokolovsky: When you commented on my bug (h 3900 ..) did you mean to use altboot to make the SD boot ? |
| 09:35.08 | *** join/#oe lmm (i=md401@87.113.75.183.plusnet.pte-ag2.dyn.plus.net) |
| 09:47.11 | *** join/#oe dijenerate (n=dijenera@69.73.205.102) |
| 09:47.47 | *** join/#oe dijenerate (n=dijenera@69.73.205.102) |
| 09:49.33 | psokolovsky | jan_js: I personally didn't, though of course you could use it. possibly. |
| 09:56.06 | jan_js | psokolovsky: Is there another way making a SD boot then ? |
| 10:00.12 | *** join/#oe readon (i=readon@218.194.60.238) |
| 10:01.45 | readon | how to specify which directory would be packaged in my ipk file? |
| 10:02.13 | psokolovsky | jan_js: http://handhelds.org/moin/moin.cgi/CardBoot |
| 10:02.48 | zecke | readon: IIRC you already got that information from me. FILES_${PN} controls which files get installed into a package |
| 10:08.09 | readon | thanks |
| 10:12.14 | jan_js | psokolovsky: Thanks ! Btw., I may jot down some info about h3800 / h3900 booting for the wiki if you want me to. I mean, it case it works. |
| 10:12.43 | psokolovsky | jan_js: better work on getting flash boot to work ;-) |
| 10:15.54 | jan_js | But if you say the h3800 / h3900 image are meant to boot from SD one should state that in the wiki and give a hint to which procedure should be used ? |
| 10:17.44 | RP | Hmm. What did Rolf mean by "I don't intend to participate in a fiefdom"? |
| 10:18.34 | hrw | RP: Ångström === Koen's only toy |
| 10:18.51 | hrw | RP: in short |
| 10:19.39 | *** join/#oe rd_ (n=rd@vnsecurity.net) |
| 10:20.58 | XorA | but its kinda hard to tell from disjointed emails |
| 10:21.53 | psokolovsky | jan_js: no, instead, effort should be put into making into bootable by nay means ;-) |
| 10:22.22 | psokolovsky | XorA: hi, hope you'll have chance to test module_conf_* changes soon |
| 10:22.33 | hrw | Laibsch setup mediawiki, filled with some initial content, created structure for it and announced it. then Koen came and removed it without asking |
| 10:24.58 | XorA | psokolovsky: need an evening wife is out and I shall test |
| 10:25.09 | psokolovsky | thanks |
| 10:32.23 | jan_js | psokolovsky: o.k., I understand. Will test altboot / haret anyway, becaus for me this is an interesting option. |
| 10:34.55 | readon | the ipk name is libminigui-1.6-2_1.6.2-r2_armv4t.ipk, but bitbake search for libminigui-str which is the PN how to correct it? |
| 10:35.39 | zecke | ~fishslap koen |
| 10:35.40 | ibot | ACTION slaps koen up side the head with a wet fish. |
| 10:36.17 | zecke | koen|away: I will need to send you to the kindergarten, or relocate you to berlin and try the elctro-schock cure |
| 10:39.30 | *** join/#oe memenarsil (n=memeruiz@194.244.27.129) |
| 11:00.34 | readon | the ipk name is libminigui-1.6-2_1.6.2-r2_armv4t.ipk, but bitbake search for libminigui-str which is the PN how to correct it? does ipk package's file name base on PN? |
| 11:05.29 | *** join/#oe dijenerate (n=dijenera@69.73.205.102) |
| 11:10.07 | zecke | readon: I didn't get your the question the first time, it didn't change the second time :) |
| 11:10.44 | zecke | readon: I don't know what minigui ist but PN from the package would be "libminigui-1.6-2" which is a violation of the versioning policy |
| 11:13.40 | *** join/#oe rob_w|laptop (n=rob_w@p549BB2A9.dip0.t-ipconnect.de) |
| 11:15.49 | readon | zecke, i noticed that but PN i decided by bitbake automaticlly. |
| 11:16.04 | readon | %s/i/is/ |
| 11:16.10 | readon | zecke, i noticed that but PN is decided by bitbake automaticlly. |
| 11:16.43 | zecke | readon: no, probably by debian.bbclass but what is your question? |
| 11:16.58 | readon | i use PACKAGES="libminigui-str" in recipe, but it does no sense. |
| 11:17.38 | zecke | readon: is your distribution using debian package renaming? |
| 11:18.05 | zecke | readon: and PACKAGES is honored when it comes to FILES_THENAMEYOUWANT = "..." |
| 11:18.24 | zecke | readon: so abstract from package generation (which bitbake isn't doing anyway) |
| 11:19.50 | *** join/#oe rd__ (n=rd@vnsecurity.net) |
| 11:23.43 | *** join/#oe koen (n=koen@dominion.kabel.utwente.nl) |
| 11:27.01 | readon | i write a recipe for minigui, when i build it with oe, libminigui-1.6-2_1.6.2-r2_armv4t.ipk is generated. but when i build a image and include it.it told me that the package is not found. |
| 11:27.29 | zecke | 13:17 < zecke> readon: is your distribution using debian package renaming? |
| 11:28.27 | zecke | readon: I don't know your minigui file, I don't know if you have package renaming on.... |
| 11:28.59 | zecke | readon: but one thing is DEPENDS the other is RDEPENDS and bitbake -g will draw pretty .dot files for you, which can be searched for libminigui |
| 11:29.52 | readon | zecke, do you catch it? |
| 11:31.53 | *** join/#oe wbx (n=wbx@gw.aurisp.de) |
| 11:32.42 | *** join/#oe psycoman (n=psycoman@189.25.225.60) |
| 11:34.02 | readon | how to fix that? |
| 11:34.18 | readon | yes, i use angstrom |
| 11:34.30 | *** join/#oe psokolovsky (n=psokolov@arena.transplant.volia.net) |
| 11:37.04 | cdbot2 | * * OE Bug 2200 has been marked as DUPLICATE of bug 2675 by waldecir(AT)gmail.com |
| 11:37.06 | cdbot2 | * * QA issues in squashfs-lzma-tools-native |
| 11:37.08 | cdbot2 | * * http://bugs.openembedded.org/show_bug.cgi?id=2200 |
| 11:40.33 | zecke|food | readon: I doubt there is anything to fix |
| 11:40.42 | zecke|food | readon: just use the appropriate name in RDEPENDS |
| 11:42.42 | *** join/#oe vivijim (n=vivijim@200.184.118.132) |
| 11:44.52 | *** join/#oe cbrake (n=cbrake@oh-69-34-21-229.sta.embarqhsd.net) |
| 11:44.59 | *** join/#oe stevenh (n=lews@65.167.23.2) |
| 11:46.16 | *** join/#oe wrobbie (n=rob@cm203.kappa85.maxonline.com.sg) |
| 11:46.45 | *** join/#oe dion (n=dion@inhex.net) |
| 11:52.58 | jan_js | exit |
| 11:58.43 | *** join/#oe Any_Key (n=Any_Key@rt94.highlink.ru) |
| 11:58.48 | *** part/#oe Any_Key (n=Any_Key@rt94.highlink.ru) |
| 12:04.25 | *** join/#oe vivijim (n=vivijim@200.184.118.132) |
| 12:04.44 | *** join/#oe jan_js (n=Elive_us@pD953A0CD.dip0.t-ipconnect.de) |
| 12:07.35 | psycoman | how to turnon screen after inactive stae ? |
| 12:07.41 | psycoman | s/stae/state |
| 12:07.59 | *** join/#oe marciom (n=marcio@200.184.118.132) |
| 12:09.43 | readon | you mean RDEPENDS="libminigui-str" is wrong? |
| 12:10.27 | *** join/#oe jsheldon (n=jim@70.90.111.225) |
| 12:12.09 | *** join/#oe Sup3rkiddo (n=sudharsh@unaffiliated/sudharsh) |
| 12:17.19 | *** join/#oe jonb (n=jonb@cpc5-lanc4-0-0-cust628.brig.cable.ntl.com) |
| 12:21.17 | *** join/#oe dijenerate (n=dijenera@69.73.205.102) |
| 12:26.21 | readon | where does PKG_xxxx is defined? |
| 12:29.14 | *** join/#oe vivijim (n=vivijim@200.184.118.132) |
| 12:35.54 | *** join/#oe rob_w|laptop (n=rob_w@p549BB2A9.dip0.t-ipconnect.de) |
| 12:44.00 | *** join/#oe Crofton (n=balister@66-207-66-26.black.dmt.ntelos.net) |
| 12:44.06 | *** join/#oe birunko (n=birunko@200.184.118.132) |
| 12:44.17 | *** join/#oe koen (n=koen@dominion.kabel.utwente.nl) |
| 12:52.10 | *** join/#oe AvengerMoJo (n=alex@219.142.232.202) |
| 12:54.26 | *** join/#oe dcordes (n=ucordes@e179103133.adsl.alicedsl.de) |
| 12:54.29 | dcordes | t |
| 12:54.31 | *** part/#oe dcordes (n=ucordes@e179103133.adsl.alicedsl.de) |
| 12:59.43 | *** join/#oe tnb (n=tnb@sdgsystems.net) |
| 13:15.19 | *** join/#oe aCiDBaSe (n=osantana@200.184.118.132) |
| 13:19.23 | psycoman | im tring build bintuils package but i got this error |
| 13:19.25 | psycoman | http://pastebin.com/d491f37ad |
| 13:19.36 | psycoman | but i have make and make info in my system |
| 13:19.46 | psycoman | s/make info/makeinfo |
| 13:21.07 | zecke | psycoman: I fear you to look into binutils source |
| 13:28.49 | psycoman | zecke: sorry, but look for ? |
| 13:29.33 | zecke | psycoman: go to the binutils source and check what is failing |
| 13:31.47 | psycoman | sorry zecke im new in this build system what exactly i have to do ? |
| 13:32.09 | zecke | psycoman: cd to the source of binutils |
| 13:32.17 | zecke | ../temp/run.do_compile* |
| 13:32.21 | zecke | check the directory it fails |
| 13:32.30 | psycoman | you see my pastbin ? |
| 13:32.31 | zecke | open the Makefile and see what could be wrong |
| 13:32.38 | psycoman | ahh, ok |
| 13:32.43 | zecke | use strace -fF and see if makeinfo was called at all |
| 13:34.19 | psycoman | like this "strace -fF bitbake binutils" ? |
| 13:37.08 | zecke | psycoman: I would strace the temp/run.do_compile script... |
| 13:37.13 | *** join/#oe T0mW (n=Tom@24.238.86.158.res-cmts.sth.ptd.net) |
| 13:40.08 | *** join/#oe koen (n=koen@dominion.kabel.utwente.nl) |
| 13:47.34 | jan_js | zecke: Do you think it would be possible to build an angstrom image using an older 2.4.27 kernel ? |
| 13:48.17 | psycoman | ahh, okay this is a script duhhh, i will do |
| 13:48.28 | jan_js | zecke: Apart from the fact that it would be against policies etc. ? |
| 13:53.37 | psycoman | ~pastebin |
| 13:53.37 | ibot | hmm... pastebin is a place to paste your stuff without flooding the channel - try http://pastebin.ca, or http://channels.debian.net/paste, or http://rafb.net/paste/, or http://pastebin.com is usually painfully too slow and unresponsive to use, use one of the other pastebin sites, or dpaste.com is a very nice pastebin as well |
| 13:54.03 | *** join/#oe pvanhoof (n=pvanhoof@d54C0EE14.access.telenet.be) |
| 13:54.55 | jan_js | zecke: stupid question ? |
| 13:56.24 | psycoman | maybe zecke is afk |
| 13:57.01 | psycoman | but, why you want 2.4 ? |
| 13:58.26 | zecke | jan_js: you would need to use the legacy mode of Angstrom (which might need a minor tweak as we don't have the hardware to check if it compiles all the time) |
| 13:58.40 | jan_js | psycoman: I would like to build an image for the psion netbook. There is a good kernel for it, but its a 2.4.27 |
| 13:59.38 | jan_js | zecke: would that just mean to choose angstroem.xxx.legacy as the distribution in local.conf ? |
| 14:00.41 | psycoman | legancy will build a 2.4 kernel |
| 14:01.02 | psycoman | zecke: my strace http://paste.debian.net/33245, i dont know how to read strace information |
| 14:01.17 | psycoman | zecke: i dont find any usefull information for me |
| 14:03.12 | zecke | psycoman: sorry, I need to work now. Unless you want to pay my food you have to search yourself or hope I'm not too dead at 22h |
| 14:03.32 | zecke | my guess your makeinfo doesn't work or isn't executable... |
| 14:04.55 | psycoman | zecke: dont worrie about this, im still tring, may later i can help with i dont find a solution xD |
| 14:05.15 | psycoman | zecke: just to know i can execute makeinfo in console, thnkx for help |
| 14:05.53 | psycoman | zecke: just to know here in Brazil is 11:05, what hour is for you ? |
| 14:06.06 | jan_js | psycoman:Now that your problem is solved, what exactly do you mean by 'legacy mode' ;-) |
| 14:06.37 | jan_js | psycoman: or 'legacy' ? |
| 14:06.58 | zecke | jan_js: ls conf/distro/angstrom*? |
| 14:07.06 | *** join/#oe chrisromain (n=chrisrom@88-138-92-157.adslgp.cegetel.net) |
| 14:07.16 | psycoman | zecke: gotcha ^^ |
| 14:07.21 | jan_js | psycoman: In Germany its 16:08 |
| 14:08.27 | zecke | psycoman: your strace is not complete, otherwise you would find the message of your pastebin inside the strace result |
| 14:09.57 | jan_js | zecke: there is nothing in it, except that it requires angstrom-2007.1.conf - how can that work ? |
| 14:10.13 | zecke | jan_js: see above, follow that link |
| 14:10.13 | psycoman | zecke: im execute ./missing makeinfo to be more precise, i will trace this script and i can get more info and less strace information |
| 14:10.24 | psycoman | but now im in the way... |
| 14:10.58 | psycoman | thnkx the support, im will make some tests now |
| 14:11.21 | zecke | jan_js: well follow the link to angstrom-2007.1.conf and read it? |
| 14:11.33 | jan_js | zecke: really don't want you to keep from work, but there is no link that I can see. |
| 14:11.59 | jan_js | zecke: oh - o.k., sorry. |
| 14:12.00 | zecke | jan_js: require otherfile.conf |
| 14:12.06 | zecke | jan_js: open otherfile.conf |
| 14:12.19 | zecke | jan_js: see some machines set oabi (e.g. h38xx, simpad) |
| 14:12.37 | zecke | jan_js: then grep for simpad see where it sets what... |
| 14:13.24 | zecke | jan_js: e.g. ARM_ABI, PACKAGE_EXTRA_ARCHS,FEED_ARCH, KERNEL, MACHINE_KERNEL_VERSION... |
| 14:13.29 | chouimat | morning |
| 14:13.54 | zecke | jan_js: tweak it until it works, write it down and contribute to the manual |
| 14:14.30 | zecke | Oh this is the 1000 time in my Free Software career that I asked someone to contribute to a manual :) |
| 14:14.45 | lmm | I have virtual/libsdl:libsdl-qpe set in PREFERRED_PROVIDERS, but bitbake is still trying to build libsdl-x11; why, and what can I do? |
| 14:14.48 | zecke | anyway, need to earn food |
| 14:15.13 | jan_js | zecke: I spent half an afternoon with things like that yesterday - but where comes the legacy ? |
| 14:15.51 | jan_js | zecke: guten appetit ;-) |
| 14:17.28 | *** join/#oe CosmicPenguin (n=nobody@crank.laptop.org) |
| 14:17.38 | lmm | ah, nm |
| 14:19.21 | *** join/#oe mrdata (i=mrdata@dslb-088-074-142-157.pools.arcor-ip.net) |
| 14:19.40 | mrdata | hi all |
| 14:19.44 | psycoman | hi |
| 14:20.04 | zecke | jan_js: legacy somes from setting the above variables and more |
| 14:20.57 | zecke | jan_js: if the last guy that received that special handling would have taken the 30 minutes to write stuff down we would not have to start from the beginning |
| 14:21.13 | zecke | jan_js: pick one machine with a 2.4er kernel and check what it does (e.g. the simpad) |
| 14:22.41 | jan_js | zecke: thanks for the hint, I will do that this evening! |
| 14:23.40 | zecke | jan_js: we are all caught with day time jobs, so it is best to have even more tiny questions |
| 14:24.08 | zecke | jan_js: but reread the above there is a lot of information of how I would proceed and succeed |
| 14:25.07 | jan_js | zecke: o.k. - if it really works I promise to jot it down for the manual ;-) |
| 14:26.18 | psycoman | zecke: dont need be a instant suport, just post to see, when you can |
| 14:26.22 | zecke | jan_js: last time I checked -legacy it set ARM_OABI now it doesn't |
| 14:26.44 | psycoman | binutill execute a missing script for searching (?) makeinfo, i make a strace for this |
| 14:26.47 | psycoman | http://paste.debian.net/33254 |
| 14:27.09 | psycoman | but it try to find make info in ./, i have installed makeinfo and i can execute it from terminal |
| 14:27.46 | psycoman | i have found this bug, http://bugs.openembedded.org/show_bug.cgi?id=1513, but is invalidate and have no info |
| 14:28.34 | zecke | psycoman: If you would follow instructions it would be more easy... |
| 14:28.50 | zecke | psycoman: strace -fF ../temp/run.do_comp* nothing more, nothing less |
| 14:29.25 | psycoman | sorry zaku this have 8000 lines |
| 14:29.33 | psycoman | where i can post this ? |
| 14:29.47 | psycoman | s/zaku/zecke |
| 14:31.12 | zecke | psycoman: no idea, if I would be in your position I would try to understand what binutils is trying to do and then fix the issue |
| 14:31.33 | zecke | psycoman: it is a interaction between your host distribution and binutils's buildsystem |
| 14:32.05 | jan_js | zecke: thats what I saw yesterday - so I added my machine name to simpad, collie etc. where the ABI is determined |
| 14:32.06 | psycoman | ok i see i get, it is not a oe issue |
| 14:32.26 | psycoman | thnkx and now i can back to work, thnkx again |
| 14:32.30 | zecke | jan_js: this is only the first step, there are saldy two or three more places |
| 14:32.43 | jan_js | zecke: and I added it at 2 more places to get the correct packaging, architecture and so on |
| 14:32.59 | zecke | jan_js: and you will need to set KERNEL_VERSION and the above named variables and more as well... |
| 14:33.16 | *** part/#oe zecke (n=ich@dsl-62-220-14-162.berlikomm.net) |
| 14:33.19 | jan_js | zecke: and I made a machine.conf where I amsetting kernel24 etc. |
| 14:35.57 | *** join/#oe Penix (n=wenas@unaffiliated/penix) |
| 14:38.23 | *** join/#oe Readon (n=Readon@222.209.83.191) |
| 14:56.05 | *** join/#oe Keizer (n=keizer@71.16.35.6) |
| 14:59.00 | lmm | what's the default value of LD? |
| 15:00.11 | hrw | bye |
| 15:00.44 | *** join/#oe guillaum1 (n=gzba4143@AMontsouris-153-1-85-246.w90-2.abo.wanadoo.fr) |
| 15:07.52 | *** join/#oe Sup3rkiddo (n=sudharsh@unaffiliated/sudharsh) |
| 15:08.42 | slapin | hi, all! |
| 15:09.49 | slapin | any ideas on how to get kernel crash messages from device w/o serial and having graphics mode only? |
| 15:10.13 | XorA | slapin: thats hard |
| 15:10.17 | slapin | I suspect crash after resume. |
| 15:10.20 | XorA | slapin: hope they turn up on FB |
| 15:10.20 | mwester | dunno about graphics, but that's commonly done via netconsole if you have a network. |
| 15:11.20 | slapin | mwester, network is over USB, but I'd prefe something more reliable... |
| 15:11.46 | slapin | XorA, fb recovers correctly, so I hope console image will help... |
| 15:17.41 | *** join/#oe mhnoyes (n=mhnoyes@dialup-4.246.18.108.Dial1.SanJose1.Level3.net) |
| 15:21.56 | *** join/#oe dfoley (n=dfoley@s142-179-108-133.bc.hsia.telus.net) |
| 15:26.43 | *** join/#oe pH5 (n=ph5@e178249054.adsl.alicedsl.de) |
| 15:27.37 | *** join/#oe Sup3rkiddo (n=sudharsh@unaffiliated/sudharsh) |
| 15:29.21 | *** join/#oe eekee (n=ethan@cpc2-lanc4-0-0-cust540.brig.cable.ntl.com) |
| 15:30.34 | *** join/#oe koen (n=koen@dominion.kabel.utwente.nl) |
| 15:38.11 | XorA | psokolovsky: /etc/modprobe.d/rfcomm contains alias stuff so that looks right |
| 15:39.22 | *** join/#oe tomimo (n=kurre@a80-186-77-57.elisa-laajakaista.fi) |
| 15:41.15 | psokolovsky | XorA: well, it does work well for me too ;-) |
| 15:43.28 | XorA | psokolovsky: ship it :-D |
| 15:43.57 | psokolovsky | XorA: ok, will post to ML with proposal to commit soon |
| 15:44.21 | XorA | psokolovsky: people only test stuff when forced to |
| 16:04.17 | *** join/#oe punkass (n=user@unaffiliated/punkass) |
| 16:16.32 | *** join/#oe m0d0r (i=congo@frix.fri.uniza.sk) |
| 16:24.54 | *** join/#oe rob_w (n=bob@M8355.m.pppool.de) |
| 16:26.15 | *** join/#oe mallum (n=mallum@host86-138-105-250.range86-138.btcentralplus.com) |
| 16:29.46 | *** join/#oe tnb (n=tnb@sdgsystems.net) |
| 16:35.00 | *** part/#oe guillaum1 (n=gzba4143@AMontsouris-153-1-85-246.w90-2.abo.wanadoo.fr) |
| 16:51.50 | *** join/#oe dion (n=dion@inhex.net) |
| 17:08.28 | *** join/#oe punkass (n=user@unaffiliated/punkass) |
| 17:17.53 | *** join/#oe gerwinin (n=gerwinin@ip5457b30e.direct-adsl.nl) |
| 17:18.23 | *** join/#oe ScytheBlade1 (n=Death@about/pxe/ScytheBlade1) |
| 17:18.41 | *** part/#oe ade|desk (n=adavey@194.200.143.249) |
| 17:35.35 | gerwinin | lo |
| 17:35.58 | gerwinin | Stelios, it seems I had to send this guy a pdf and that he cannot read odt |
| 17:46.03 | *** join/#oe osas (n=nnnnnosa@72.53.149.68) |
| 17:46.15 | *** join/#oe shreyas (n=Shreyas@ACCA4E39.ipt.aol.com) |
| 17:59.49 | *** join/#oe florian (n=fuchs@78.48.224.47) |
| 18:00.04 | CoreDump|home | hi |
| 18:01.26 | *** join/#oe likewise (n=Leon_Woe@82-171-189-134.dsl.ip.tiscali.nl) |
| 18:01.47 | *** join/#oe jan_js_ (n=jan_js@p548F84E0.dip0.t-ipconnect.de) |
| 18:02.21 | *** join/#oe dion (n=dion@inhex.net) |
| 18:09.08 | likewise | hello all |
| 18:23.38 | Crofton|home | gm likewise |
| 18:23.55 | likewise | hi Crofton |
| 18:24.00 | Crofton|home | http://www.maniacchallenge.org/index.html |
| 18:24.09 | Crofton|home | Anyone interested in forming an OE team? |
| 18:24.24 | Crofton|home | I want to see if I can get this running on an Eifka |
| 18:24.30 | Crofton|home | EFiKa |
| 18:24.41 | Crofton|home | EfIkA |
| 18:24.46 | likewise | maniac-ready(tm) |
| 18:25.06 | Crofton|home | slackware |
| 18:25.13 | Crofton|home | I didn;t know anyone still used that |
| 18:25.28 | likewise | My load avg is too high |
| 18:25.34 | Crofton|home | mine too |
| 18:25.37 | likewise | >1 even |
| 18:27.24 | Crofton|home | I just want to use an Efika as the node |
| 18:27.32 | Crofton|home | and I need to learn about manets |
| 18:32.42 | *** join/#oe psycoman (n=c8b96ddc@189.25.225.60) |
| 18:35.17 | *** join/#oe rob_w (n=bob@M8355.m.pppool.de) |
| 18:39.41 | *** join/#oe woglinde (i=woglinde@85.178.67.130) |
| 18:44.36 | RP | Crofton|home: Whats wrong with slackware? (he says typing from a slackware box) :) |
| 18:45.40 | woglinde | rp nothing |
| 18:45.55 | Crofton|home | RP, I was not aware that people still used it :) |
| 18:46.36 | RP | Crofton|home: I'd not use it everywhere these days but it still makes sense to me for certain uses :) |
| 18:46.44 | Crofton|home | I need to create an Efika kernel with netfilter enabled |
| 18:46.59 | woglinde | crofton hm the development isnt stop, so why shouldnt people use it |
| 18:47.06 | Crofton|home | is there a good way to have fine grained kernel configs for different purposes ... |
| 18:47.20 | RP | Crofton|home: Just enable the modules |
| 18:47.22 | Crofton|home | I just hadn't run across anyone using it |
| 18:47.33 | Crofton|home | RP, thanks good suggestion |
| 18:48.52 | *** join/#oe jan_js|home (n=jan_js|h@p548F84E0.dip0.t-ipconnect.de) |
| 18:52.02 | ljp | RP: do you work on the n800 kernel? |
| 18:54.07 | *** part/#oe psycoman (n=c8b96ddc@189.25.225.60) |
| 19:00.03 | kergoth | gcc 4.2.1 out eh |
| 19:00.29 | woglinde | kergoth mh 2 or 3 days yes |
| 19:01.12 | *** join/#oe mallum (n=mallum@host86-141-46-90.range86-141.btcentralplus.com) |
| 19:01.56 | kergoth | cool |
| 19:16.27 | *** join/#oe zap (n=zap@16.170.249.ozerki.net) |
| 19:17.56 | *** join/#oe punkass (n=user@unaffiliated/punkass) |
| 19:20.31 | *** join/#oe TheCan (n=thecan@dslb-084-056-152-087.pools.arcor-ip.net) |
| 19:28.17 | *** join/#oe timtimred (n=On3@82-34-50-106.cable.ubr02.chel.blueyonder.co.uk) |
| 19:34.41 | *** join/#oe frank7d (n=afs@p549FA96A.dip0.t-ipconnect.de) |
| 19:37.03 | mickeyl | NOTE: package libsigc++-2.0-2.0.17-r1: task do_compile: completed |
| 19:37.04 | mickeyl | yay! |
| 19:37.07 | mickeyl | ~hail polyonymous |
| 19:37.07 | ibot | ACTION bows down to polyonymous and chants, "I'M NOT WORTHY!!" |
| 19:37.12 | mickeyl | polyonymous: thanks, man! that helps me a lot |
| 19:37.15 | RP | hi mickeyl |
| 19:37.20 | mickeyl | hey RP |
| 19:37.22 | polyonymous | you're welcome :) |
| 19:37.45 | mickeyl | that's why I love the OE community. there's (almost) always someone who knows how to fix something where other guys have no idea |
| 19:37.46 | woglinde | ;) |
| 19:37.50 | polyonymous | thank woglinde, actually, he spotted error and asked me |
| 19:37.56 | mickeyl | ~hail woglinde as well |
| 19:37.56 | ibot | ACTION bows down to woglinde as well and chants, "I'M NOT WORTHY!!" |
| 19:38.22 | mickeyl | :D |
| 19:38.30 | polyonymous | and yes, not relying solely on yourself is relaxing. |
| 19:38.39 | polyonymous | sometimes too relaxing :) |
| 19:40.09 | mickeyl | right, however there are some things where I just say to myself "stop. don't dive into. you could fix that, but it would take you a long time." |
| 19:40.44 | polyonymous | that's true. The tricky part is to know when ;-) |
| 19:44.01 | jan_js|home | hi, and good evening |
| 19:44.42 | woglinde | hi jan_js |
| 19:45.05 | jan_js|home | I am trying to build an angstrom image for a 2.4 kernel. I have added my machine to angstrom.xxx.config |
| 19:45.38 | *** join/#oe md401 (i=md401@87.113.75.183.plusnet.pte-ag2.dyn.plus.net) |
| 19:45.59 | woglinde | hm why 2.4 kernel? |
| 19:46.10 | jan_js|home | and to angstrom-glibc.conf and I have set MACHINE_FEATURES_append = "kernel24" and some more setting s to make clear I want to build for 2.4 |
| 19:46.50 | jan_js|home | however, bitbake still builds all kind of 2.6 realted stuff ;-( I am trying the second day allready .. |
| 19:47.50 | jan_js|home | woglinde: its for the old netbook, there is a 2.4.27 kernel with two patches which worked very well so far |
| 19:49.33 | *** join/#oe md401 (i=md401@87.113.75.183.plusnet.pte-ag2.dyn.plus.net) |
| 19:53.41 | jan_js|home | woglinde: I might try a 2.6 kernel later, but I wamted to start with a kernel that works first. |
| 19:56.12 | psokolovsky | OE.dev generally doesn't support 2.4 anymore. Stuff might got bitrotted. Fixing it will time which otherwise could be invested in working on current stuff... |
| 19:57.37 | kergoth | 2.4 is more trouble than its worth |
| 19:58.04 | jan_js|home | psokolovsky: I really like the idea of throwing my netbook away, because I like it. And I think OE still can build opensimpad2.4, collie2.4 etc. , right ? |
| 19:58.30 | kergoth | cp: cannot stat `/home/clarson/code/oe/org.openembedded.dev/packages/mozilla/firefox-1.0.7/jsautocfg.h': No such file or directory |
| 19:58.32 | kergoth | hrm |
| 19:58.32 | woglinde | puh |
| 19:58.39 | woglinde | we only build 2.6 images |
| 19:58.41 | woglinde | for simpad |
| 19:58.48 | jan_js|home | psololovsky: dont like - I do not like the idea of throwing it away off course. |
| 19:58.49 | woglinde | 2.4 is dead is dead is dead |
| 19:59.17 | psokolovsky | jan_js|home: why throw, work on contemporary kernel |
| 19:59.55 | jan_js|home | I am no kernel hacker - therefore |
| 20:01.12 | ljp | 2.4 isnt dead :) |
| 20:01.26 | jan_js|home | ljp: so what ? |
| 20:01.56 | psokolovsky | yep, it still wastes people's resources ;-) |
| 20:02.29 | woglinde | ljp 2.4 for arm is dead |
| 20:02.43 | psokolovsky | well, I want to build "known good" openwrt kernel for my wl500g too, and that's 2.4 ;-( so, I'm in queue ;-) |
| 20:03.22 | jan_js|home | maybee I can go back to openzaurus. Or even use the ancient oe version of familiar ;-) |
| 20:05.00 | ljp | woglinde: nope. still alive and working |
| 20:05.54 | jan_js|home | ljp: For what kind of device do you build 2.4 images with oe ? |
| 20:06.25 | ljp | i dont. too troublesome. IMHO oe should be more kernel version agnostic |
| 20:06.32 | woglinde | ljp??? where is the actvie development for kernel 2.4 for arm please show me |
| 20:06.42 | kergoth | oe supports what people care about. if you volunteer to maintain the 2.4 crap, feel free |
| 20:07.14 | ljp | well, obviously it doesnt support everything people care aboput |
| 20:07.34 | kergoth | it supports everything those who contribute care about. |
| 20:08.24 | hrw | ljp: 2.4/arm is not dead - it just smells like that |
| 20:08.31 | ljp | :) |
| 20:09.36 | jan_js|home | One thing I don't understand is that oe supported 2.4 kernels up to now - there are so many of them in the database. |
| 20:09.42 | timtimred | 2.6 is too big to fit in flash on some devices so it is still relevant in embedded terms imho. |
| 20:09.56 | ljp | exactly. |
| 20:09.59 | hrw | 2.4/arm has one problem |
| 20:10.03 | woglinde | ???????? |
| 20:10.04 | jan_js|home | so where is the problem right now ? Is it broken for 2.4 kernels ? |
| 20:10.04 | hrw | lack of upstream |
| 20:10.13 | kergoth | whee, food coma |
| 20:10.30 | woglinde | you got all brainwashed by denx |
| 20:10.46 | woglinde | but even he noticed ones that 2.4 isnt the furture |
| 20:11.27 | ljp | not saying it isnt. but 2.4 is still viable and used on devices |
| 20:11.48 | timtimred | indeed, on brand spanking new ones. |
| 20:11.58 | woglinde | no upstream support no real development -> dead |
| 20:11.59 | jan_js|home | nobody says its the future, but I would like to have angstroem image for my netbook without having to become a kernel hacker! |
| 20:12.05 | woglinde | even its work |
| 20:12.40 | jan_js|home | woglinde: So oe is not broken for 2.4 kernels then ? |
| 20:12.50 | woglinde | jan_js right |
| 20:13.11 | woglinde | or I dont know if something is broken |
| 20:13.15 | woglinde | it should work |
| 20:14.31 | jan_js|home | woglinde: Thats good - so could we please come back to my initial problem - what might cause oe building 2.6 kernel stuff even though I tmade all these settings for OABI, kernel version etc. ? |
| 20:15.06 | woglinde | try bitbake -e |
| 20:15.11 | woglinde | and look where 2.6 is set |
| 20:15.46 | jan_js|home | good idea - I think you have a reputation for your good ideas here ;-) |
| 20:16.40 | woglinde | jan_js I often have to look at it myself |
| 20:17.07 | jan_js|home | woglinde; do not try to comfort me ... |
| 20:20.12 | florian | ljp: |
| 20:20.31 | florian | ljp: You had to say that... any chance to see 2.6 for the Greenphone soon? |
| 20:23.34 | *** join/#oe gremlin[it] (n=gremlin@217.201.170.212) |
| 20:31.18 | ljp | forian: we might be looking into it |
| 20:32.46 | hrw | I just saw how far I go in wrong direction in birmingham during monday.. |
| 21:00.44 | *** join/#oe gremlin[it] (n=gremlin@217.201.23.29) |
| 21:03.47 | *** join/#oe drmikecrowe (i=Miranda@199.222.167.248) |
| 21:44.47 | *** join/#oe Zero_Chaos (n=zero@c-71-60-239-40.hsd1.pa.comcast.net) |
| 21:45.15 | hrw | bye |
| 21:45.30 | woglinde | nite hrw |
| 21:50.26 | *** join/#oe AvengerMoJ1 (n=alex@219.142.254.253) |
| 21:52.37 | *** join/#oe wirelessdreamer (n=yume@chrobd01.vailsys.com) |
| 21:53.19 | wirelessdreamer | anyone know what libtoolize: invalid AC_CONFIG_AUX_DIR syntax: AC_CONFIG_AUX_DIRS($srcdir/build-scripts) means? i'm trying to build libsdl-1.2.12 with fbcon enabled |
| 21:53.33 | Philippe | florian: can you keep me in the loop with the netbook stuff? Seems I did not get jonb's email |
| 21:53.47 | *** join/#oe happycube (n=cpage@netblock-68-183-40-90.dslextreme.com) |
| 21:54.30 | florian | Philippe: yes sure, i'll forward you that mail... I didn't manage to answer him yet. |
| 21:55.24 | Philippe | florian: thanks! |
| 22:00.23 | *** join/#oe Keizer (n=keizer@208.50.100.60) |
| 22:01.09 | *** join/#oe summatusmentis (n=summatus@216.17.28.226.ip.usinternet.com) |
| 22:03.24 | *** join/#oe dcordes (n=ucordes@e179103133.adsl.alicedsl.de) |
| 22:03.55 | Philippe | is angstrom x11-image-h3800.jffs2 supposed to boot from flash or sd? |
| 22:05.39 | dcordes | hi |
| 22:14.28 | likewise | good nite all |
| 22:17.45 | *** part/#oe vivijim (n=vivijim@200.184.118.132) |
| 22:35.44 | *** part/#oe dfoley (n=dfoley@s142-179-108-133.bc.hsia.telus.net) |
| 22:35.44 | nodens | does oe automatically set up a feed (packages index) ? |
| 22:35.52 | nodens | or is there something to do ? |
| 22:37.08 | woglinde | yes |
| 22:37.13 | woglinde | build a image |
| 22:37.15 | woglinde | an |
| 22:38.25 | nodens | ok, I'll try |
| 22:38.40 | nodens | once the current build is done ;) |
| 22:39.12 | nodens | and where is the feed located ? in build/tmp/deploy ? |
| 22:40.59 | woglinde | yes deploy/arch |
| 22:41.09 | nodens | ok |
| 22:41.13 | nodens | thanks |
| 22:41.14 | woglinde | arch can be all arm-o/eabi i686 |
| 22:41.26 | woglinde | you have to put them all without i686 |
| 22:41.36 | woglinde | on the target ipgk conf |
| 22:42.00 | nodens | yup :) |
| 22:42.08 | woglinde | arhs deploy/libcyouse/ |
| 22:42.23 | nodens | need a webserver too but that shouldn't be a problem ;) |
| 22:42.25 | woglinde | you will find out by yourself now |
| 22:42.31 | woglinde | right |
| 22:43.35 | *** join/#oe dcordes (n=ucordes@e179103133.adsl.alicedsl.de) |
| 23:16.49 | *** join/#oe vivijim (n=vivijim@189.13.173.128) |
| 23:23.48 | wirelessdreamer | i'm trying to get a bb file made for a new release of libsdl, i'm getting | autoreconf: running: libtoolize --copy --force |
| 23:23.48 | wirelessdreamer | | libtoolize: invalid AC_CONFIG_AUX_DIR syntax: AC_CONFIG_AUX_DIRS($srcdir/build-scripts) |
| 23:23.48 | wirelessdreamer | | autoreconf: libtoolize failed with exit status: 1 |
| 23:24.00 | wirelessdreamer | and changed it to AC_CONFIG_AUX_DIRS(${S}/build-scripts) |
| 23:24.12 | woglinde | hm |
| 23:24.27 | woglinde | more facts? |
| 23:27.13 | woglinde | $srcdir |
| 23:27.19 | woglinde | I saw this error too |
| 23:27.43 | woglinde | dont use variables in AC_CONFIG_AUX_DIRS( ) |
| 23:28.00 | woglinde | args |
| 23:28.04 | woglinde | its too late |
| 23:28.05 | woglinde | sorry |
| 23:28.33 | woglinde | yes good solution |
| 23:42.28 | *** join/#oe ScytheBlade1 (n=Death@about/pxe/ScytheBlade1) |
| 23:43.30 | wirelessdreamer | whats the right way for me to pass AC_CONFIG_AUX_DIRS() to configure? |
| 23:43.44 | woglinde | as you did |
| 23:43.47 | woglinde | sorry |
| 23:45.02 | *** join/#oe mzb (n=ubernut@ppp108-88.static.internode.on.net) |
| 23:45.17 | woglinde | nite |
| 23:48.08 | wirelessdreamer | i'm still getting libtoolize: invalid AC_CONFIG_AUX_DIR syntax: AC_CONFIG_AUX_DIRS() |