| 00:00.28 | Laibsc1 | koen: Which one of the thousand commits you made today? |
| 00:00.29 | Laibsc1 | I usually don't follow your commits closely |
| 00:04.44 | Laibsch | koen: In case you are talking about rm -Rf sources/altboot, I don't have such a dir. |
| 00:05.22 | Laibsch | I only have two tarballs |
| 00:06.11 | *** join/#oe chouimat (n=dieu@kde/developer/chouinard) |
| 00:26.52 | *** join/#oe mithro (n=tim@lester.mithis.com) |
| 00:34.26 | *** join/#oe AsLan^away (n=fredrick@211.209.168.85) |
| 00:35.55 | *** join/#oe wrobbie (n=rob@cm74.kappa84.maxonline.com.sg) |
| 00:37.38 | *** join/#oe mithro (n=tim@lester.mithis.com) |
| 00:52.42 | CoreDump|home | fwiw monotone.openembedded.org is down |
| 00:52.43 | *** join/#oe |jbs| (n=Bernardo@89-180-90-153.net.novis.pt) |
| 00:59.29 | *** part/#oe mreimer_ (n=mreimer_@luthien.vpop.net) |
| 01:03.48 | *** join/#oe AvengerMoJo (n=alex@219.142.253.219) |
| 01:08.54 | Zero_Chaos | anyone else fail kismet compile building with angstrom and bitbake 1.8.2? |
| 01:09.07 | Zero_Chaos | 1.8.3 I mean |
| 01:11.11 | CoreDump|home | Zero_Chaos: I'll try. Will take a few minutes tho |
| 01:11.48 | Zero_Chaos | cothanks. sanity check on config.log fails for me. |
| 01:32.46 | *** join/#oe Zero_Chaos (n=zero@c-71-60-239-40.hsd1.pa.comcast.net) [NETSPLIT VICTIM] |
| 01:41.07 | *** join/#oe Crofton__ (n=balister@jhr-476-5192.mprg.ee.vt.edu) |
| 01:41.07 | *** join/#oe Crofton|home (n=balister@66-207-66-26.black.dmt.ntelos.net) |
| 01:41.07 | *** join/#oe mickey|moving (n=mickeyl@linuxtogo.org) [NETSPLIT VICTIM] |
| 01:41.07 | *** join/#oe aloril (n=aloril@kaar72.airix.fi) [NETSPLIT VICTIM] |
| 01:41.07 | *** join/#oe RP (i=1000@tim.rpsys.net) [NETSPLIT VICTIM] |
| 01:41.07 | *** join/#oe cdbot2 (n=cdbot2@hentges.net) |
| 01:42.07 | *** join/#oe AsLan^away (n=fredrick@211.209.168.85) |
| 01:42.07 | *** join/#oe marciom (n=marcio@200.184.118.132) |
| 01:42.07 | *** join/#oe nslu2-log (n=nslu2-lo@nslu2-linux/dyoung) |
| 01:42.08 | *** join/#oe daurnimator (i=daurn@unaffiliated/daurnimator) |
| 01:42.08 | *** join/#oe JoeLaptop (n=jciccone@pool-71-187-1-10.nwrknj.fios.verizon.net) |
| 01:42.09 | *** join/#oe philippe (n=fille@a91-153-17-113.elisa-laajakaista.fi) [NETSPLIT VICTIM] |
| 01:42.09 | *** join/#oe CIA-4 (n=CIA@208.69.182.149) |
| 01:42.09 | *** join/#oe [cc]smart (n=[cc]smar@gw.ptr-62-65-142-223.customer.ch.netstream.com) |
| 01:42.10 | *** join/#oe oxo (i=jorik@kippendief.biz) |
| 01:42.22 | *** join/#oe osas (n=osas@CABLE-72-53-75-252.cia.com) [NETSPLIT VICTIM] |
| 01:42.22 | *** join/#oe Varoudis_ (n=varoudis@85.73.136.255) |
| 01:42.22 | *** join/#oe awelux (n=awelux@lvps87-230-8-217.dedicated.hosteurope.de) [NETSPLIT VICTIM] |
| 01:42.23 | *** join/#oe dkey (i=somebody@193.170.48.236) |
| 01:42.23 | *** join/#oe do13 (n=nnnnnnnn@do13.in-dsl.de) |
| 01:42.23 | *** join/#oe stefan_schmidt (n=stefan@datenfreihafen.org) [NETSPLIT VICTIM] |
| 01:42.23 | *** join/#oe hrw|gone (n=hrw@130.89.145.130) |
| 01:44.53 | *** join/#oe mzb (n=ubernut@ppp108-88.static.internode.on.net) |
| 01:44.53 | *** join/#oe tsdogs (n=twostupi@62.123.180.130) |
| 01:44.54 | *** join/#oe svolpe_gerrath (n=Gerrath_@unaffiliated/gerrath) |
| 01:44.54 | *** join/#oe ljp (n=lpotter@203.94.178.46) |
| 01:44.54 | *** join/#oe holtmann (n=holtmann@nikita.holtmann.net) |
| 01:44.54 | *** join/#oe joshua_ (i=joshua@c-24-60-144-77.hsd1.ma.comcast.net) |
| 01:44.54 | *** join/#oe victor_rx1950 (n=victor_d@85.195.145.138.satgate.net) |
| 01:44.57 | *** join/#oe JustinP (n=papercra@c-69-181-11-251.hsd1.ca.comcast.net) |
| 01:44.57 | *** join/#oe VoodooZ (n=palm3@modemcable045.249-81-70.mc.videotron.ca) |
| 01:44.57 | *** join/#oe kb7sqi (i=kb7sqi@cpe-071-071-104-054.triad.res.rr.com) |
| 01:44.57 | *** join/#oe apaulsen (n=apaulsen@64.122.73.112) |
| 01:44.57 | *** join/#oe cworth (n=cworth@c-67-160-161-141.hsd1.or.comcast.net) |
| 01:44.58 | *** join/#oe Shoragan (n=shoragan@datenfreihafen.org) |
| 01:44.58 | *** join/#oe aoe (n=aoe@tigerente.htu.tuwien.ac.at) |
| 01:44.58 | *** join/#oe reach (n=reach@sw169-210-231.adsl.seed.net.tw) |
| 01:44.58 | *** join/#oe hufnus (n=slonsiki@69-12-177-67.dsl.static.sonic.net) |
| 01:44.58 | *** join/#oe ggilbert (n=ggilbert@tinman.treke.net) |
| 01:44.58 | *** join/#oe koen|away (i=koen@dominion.kabel.utwente.nl) |
| 01:44.59 | *** join/#oe pht_ (n=pht@feynman.spatium.org) |
| 01:45.26 | *** join/#oe hwtechnik (n=hwtechni@f1.globalcore.net) |
| 01:45.27 | *** join/#oe splat1 (n=splat1@rf1.splat1.com) |
| 01:48.17 | *** join/#oe CM (i=cm@shaka.acc.umu.se) [NETSPLIT VICTIM] |
| 01:48.55 | *** join/#oe fdv (i=1988@en.ifi.uio.no) |
| 01:49.21 | *** join/#oe toi (n=pleemans@d5152D3B4.access.telenet.be) |
| 01:51.18 | *** join/#oe univac (n=univac@xmms2/user/univac) |
| 01:57.28 | *** join/#oe chii (i=chii@freenode/bot/chii) |
| 02:06.38 | *** join/#oe AvengerMoJo (n=alex@61.14.130.201) |
| 03:18.28 | *** join/#oe minipanda (n=hzhang@221.221.156.243) |
| 04:17.38 | *** join/#oe kurre2_ (n=tomimo@a80-186-67-166.elisa-laajakaista.fi) |
| 04:18.02 | *** join/#oe tomimo (n=kurre@a80-186-67-166.elisa-laajakaista.fi) |
| 05:07.11 | *** join/#oe mithro (n=tim@ppp246-117.static.internode.on.net) |
| 05:13.17 | *** join/#oe AvengerMoJo (n=alex@61.14.130.201) |
| 05:19.58 | *** join/#oe _law_ (n=law@mail.stiftadmont.at) |
| 05:20.03 | *** join/#oe emte (n=emte@d64-180-45-14.bchsia.telus.net) |
| 05:26.45 | *** join/#oe Laibsch (n=Laibsch@p54B95A50.dip.t-dialin.net) |
| 05:37.42 | *** join/#oe Laibsc1 (n=Laibsch@p54b9551d.dip.t-dialin.net) |
| 05:40.56 | *** join/#oe HopsNBarley (n=hops@nslu2-linux/HopsNBarley) |
| 05:41.37 | *** join/#oe idealm (n=ideal@c58-107-18-60.belrs2.nsw.optusnet.com.au) |
| 05:47.35 | *** join/#oe Marex-notebook (n=marex@85.132.236.161) |
| 05:58.30 | *** join/#oe bluelightning (n=blueligh@222-155-154-163.jetstream.xtra.co.nz) |
| 06:13.41 | *** join/#oe pleemans (n=peter@d5152D19B.access.telenet.be) |
| 06:14.33 | *** join/#oe theturtle (n=theturtl@guiness.lifl.fr) |
| 06:16.38 | Bernardo | Zero_Chaos: there's a bug open with a patch that "fixes" kismet. bug #2178 |
| 06:16.46 | Bernardo | good morning everyone |
| 06:22.43 | Ifaistos | good morning |
| 06:33.42 | *** join/#oe rd_ (n=rd@segfault.net) |
| 06:33.43 | *** join/#oe minipanda (n=hzhang@221.221.156.243) |
| 06:40.25 | *** join/#oe dion (n=dion@inhex.net) |
| 06:52.26 | *** join/#oe humsat (n=NoNoNoNo@0x5358a937.kd4nxx8.adsl-dhcp.tele.dk) |
| 06:52.32 | humsat | morn :) |
| 07:00.21 | *** join/#oe zap (n=zap@16.170.249.ozerki.net) |
| 07:14.04 | koen | *yawn* |
| 07:14.07 | koen | good morning all |
| 07:14.13 | oxo | mogge koen |
| 07:14.44 | koen | hey oxo |
| 07:17.40 | *** join/#oe summatusmentis1 (n=summatus@72.168.202.219) |
| 07:28.57 | *** join/#oe univac (n=univac@148.81.191.193) |
| 07:35.15 | *** join/#oe __law__ (n=law@mail.stiftadmont.at) |
| 07:37.30 | *** join/#oe summatusmentis1 (n=summatus@72.168.202.219) |
| 07:37.51 | *** join/#oe tsdogs (n=twostupi@84.18.144.39) |
| 07:38.34 | *** join/#oe nauj27 (i=d90c1038@gateway/web/cgi-irc/ircatwork.com/x-c7b673e6195ca4fd) |
| 07:38.40 | nauj27 | hi all |
| 07:43.10 | *** join/#oe Ifaistos (n=stelios@ipa226.211.tellas.gr) |
| 07:44.39 | Laibsc1 | Where should /usr/lib and /usr/include usually be packaged to? |
| 07:48.51 | XorA | morning |
| 07:48.56 | *** join/#oe drw|away (n=drw@dirus.hrsmart.com) |
| 07:51.07 | koen | http://www.bash.org/?759758 |
| 07:53.46 | XorA | :-) |
| 07:55.36 | nauj27 | great quote :-D |
| 07:57.14 | *** join/#oe rd_ (n=rd@segfault.net) |
| 08:01.25 | koen | still no objections to http://lists.linuxtogo.org/pipermail/openembedded-devel/2007-May/002164.html ? |
| 08:07.04 | *** join/#oe tkp (n=tom@80-47-186-175.lond-th.dynamic.dial.as9105.com) |
| 08:07.12 | XorA | koen: looks ok to me, nothing massively changing |
| 08:20.52 | *** join/#oe emte_ (n=emte@d64-180-45-14.bchsia.telus.net) |
| 08:25.09 | Ifaistos | koen : morning |
| 08:25.36 | Ifaistos | koen : have you given any though to the minimal-image matter ? |
| 08:32.11 | *** join/#oe sandworm (n=sandworm@ppp1-301.ciscom.ru) |
| 08:39.24 | Laibsch | Where should /usr/lib and /usr/include usually be packaged to? |
| 08:40.57 | sandworm | koen: hi |
| 08:41.37 | sandworm | i've found a special kernel package for ep93xx and it builds ok |
| 08:42.00 | sandworm | but it said me an error while booting |
| 08:42.13 | sandworm | Error: unrecognized/unsupported machine ID (r1 = 0x000001c3). |
| 08:42.13 | sandworm | Available machine support: |
| 08:42.13 | sandworm | ID (hex) NAME |
| 08:42.13 | sandworm | 0000021a Cirrus Logic EDB9302 Evaluation Board |
| 08:42.13 | sandworm | 000001cf Cirrus Logic EDB9315 Evaluation Board |
| 08:42.14 | sandworm | 00000304 Cirrus Logic EDB9315A Evaluation Board |
| 08:42.16 | sandworm | 000003be Glomation GESBC-9312-sx |
| 08:42.18 | sandworm | 000002a1 Technologic Systems TS-72xx SBC |
| 08:42.20 | sandworm | Please check your kernel config and/or bootloader. |
| 08:42.29 | sandworm | chip is ep9312 |
| 08:44.52 | XorA | sandworm: that kernel is obviously not for your board then |
| 08:47.14 | koen | XorA: or is has a broken redboot |
| 08:47.30 | koen | the kernel works, but R1 probably has the wrong value |
| 08:48.07 | XorA | koen: 1c3 looked beleivable as a machine id :-) |
| 08:48.08 | koen | on my glomation I need: |
| 08:48.11 | koen | load -v -r -b 0x600000 -m http -h 172.20.3.1 /koen/ep93xx/zImage |
| 08:48.11 | koen | mfill -b 0x600000 -l 4 -p 0xe3a01c03 |
| 08:48.11 | koen | mfill -b 0x600004 -l 4 -p 0xe38110be |
| 08:48.12 | koen | exec |
| 08:52.10 | koen | "do you have machine ID?" "No" "Ok, we registered one for you" "but we already had one" "GNaaaa!!!" |
| 08:52.31 | koen | the summary of the conversation between lennert and glomation inc |
| 08:52.36 | XorA | heh heh |
| 08:56.27 | sandworm | koen: booted, but cannot found root device |
| 08:56.40 | *** join/#oe ade|desk (n=adavey@194.200.143.249) |
| 08:56.58 | sandworm | exec -b 0x80000 -l 1443808 -r 0x800000 -s 4756775 -c "ramdisk_size=16384 root=/dev/ram console=ttyAM0,115200 ip=10.1.1.63:10.1.1.1:10.1.1.1:255.255.255.0:test_tion:eth0:" |
| 08:57.16 | sandworm | does your kernel support ramdisk ? |
| 08:57.37 | sandworm | and - is it possible to add my machine id ? |
| 09:08.23 | CIA-4 | 03Laibsch 07org.oe.dev * r21d6858e... 10/ (7 files in 2 dirs): wlan-ng-utils: unify |
| 09:08.28 | CIA-4 | 03Laibsch 07org.oe.dev * r84930402... 10/ (1 packages/wlan-ng/wlan-ng-utils.inc): wlan-ng-utils: put ${S} back in. It is indeed needed after all ;-) |
| 09:08.33 | CIA-4 | 03Laibsch 07org.oe.dev * rb21e004a... 10/ (1 packages/wlan-ng/wlan-ng-utils.inc): wlan-ng-utils: package up debug files. Fixes QA compilation error. |
| 09:08.38 | CIA-4 | 03Laibsch 07org.oe.dev * r43790488... 10/ (3 files in 2 dirs): |
| 09:08.39 | CIA-4 | wlan-ng-utils: fix packaging issues |
| 09:08.39 | CIA-4 | * fix spelling mistake in package debug files |
| 09:08.39 | CIA-4 | * while we're at it, package doc files |
| 09:08.39 | CIA-4 | * Bump PR |
| 09:08.43 | CIA-4 | 03Laibsch 07org.oe.dev * rad60ba71... 10/ (1 packages/lirc/lirc-config.inc): lirc: disable DRIVER_collie = "sa1100" temporarily until it works reliably |
| 09:08.50 | CIA-4 | 03Laibsch 07org.oe.dev * r9b6c5160... 10/ (3 files in 2 dirs): lirc: package debug files. Bump PR. |
| 09:15.40 | *** join/#oe dion (n=dion@inhex.net) |
| 09:21.44 | *** join/#oe memenarsil (n=memeruiz@lapradig15.informatik.tu-muenchen.de) |
| 09:22.49 | *** join/#oe lrg (n=liam@lumison.wolfsonmicro.com) |
| 09:28.58 | hrw | morning |
| 09:29.18 | *** join/#oe florian_ (n=fuchs@217.146.132.69) |
| 09:33.19 | XorA | hey hrw |
| 09:35.50 | *** join/#oe zecke (n=ich@dsl-62-220-14-162.berlikomm.net) |
| 09:37.42 | *** join/#oe thesing (n=kvirc@staaken.informatik.hu-berlin.de) |
| 09:38.23 | hrw | hi thesing |
| 09:39.08 | thesing | hi hrw |
| 09:39.27 | hrw | I have new card for test - mmc+ this time |
| 09:40.51 | *** join/#oe Sleep_Walker (n=Sleep@u-pl15.ms.mff.cuni.cz) |
| 09:41.03 | thesing | hrw: If it doesn't work, mail me the logs please. |
| 09:41.22 | hrw | thesing: will attach to bug in bugtracker |
| 09:42.33 | thesing | hrw: btw, I fixed the fail-to-read-mainbat-after-suspend bug. If all goes well we have working suspend this evening. |
| 09:42.51 | *** join/#oe memeruiz (n=memeruiz@e181026122.adsl.alicedsl.de) |
| 09:43.03 | hrw | great |
| 09:43.35 | hrw | I will try to catch kernel logs later during day - now my serial port is taken by devboard |
| 09:45.16 | thesing | And I looked into the sound stuff. The ucb1200 in collie is used for microphone and the buzzer. A pcm1741 (or so) is used for the headphone. I already got the datasheet. |
| 09:45.45 | thesing | I think I will do the ucb stuff first, as simpad uses it also. |
| 09:49.48 | *** join/#oe doppiaemme (n=mmazzeo@host-210-mi.linuxserver.it) |
| 09:50.22 | doppiaemme | 'morning |
| 09:59.48 | *** join/#oe psokolovsky_ (n=psokolov@empty-crossing.volia.net) |
| 10:01.47 | zecke | koen: ping? Did you solve your perl issue? |
| 10:04.38 | doppiaemme | I have a similar "unrecognized option -Qy" : http://bugs.openembedded.org/show_bug.cgi?id=1449 |
| 10:04.46 | *** join/#oe Sleep_Walker (n=Sleep@u-pl15.ms.mff.cuni.cz) |
| 10:04.53 | doppiaemme | do you know what could be wrong in my environment settings ?? |
| 10:05.12 | doppiaemme | I can't find any hints... |
| 10:08.01 | hrw | ~lart perl build |
| 10:08.01 | ibot | turns perl build into a lifesized tux doll |
| 10:09.03 | sandworm | koen: added to defconfig "CONFIG_MACH_EDB9312=y" and kernel booted ok |
| 10:10.23 | *** join/#oe zecke_ (n=ich@dsl-62-220-14-162.berlikomm.net) |
| 10:10.51 | sandworm | koen: would you get my .config for this board that works well and supports all peripherial (graphics, sound etc) ? |
| 10:31.07 | Laibsch | www.openembedded.org down or slow? |
| 10:31.14 | Laibsch | Is /usr/sbin not packaged by default anymore? |
| 10:34.37 | *** join/#oe benlau (n=benlau@221.125.13.148) |
| 10:41.54 | *** join/#oe mrdata (i=mrdata@dslb-088-074-144-219.pools.arcor-ip.net) |
| 10:42.31 | mrdata | hi all |
| 10:43.11 | *** join/#oe greentux (n=lemke@p5493EFE1.dip.t-dialin.net) |
| 10:43.59 | zecke_ | Laibsch: slow |
| 10:46.32 | koen | doppiaemme: I bet your /bin/sh is /bin/dash |
| 10:49.23 | *** join/#oe woglinde (n=heinold@leningrad.mi.fu-berlin.de) |
| 10:52.36 | sandworm | koen: YES IT BOOTED!!! |
| 10:54.46 | koen | sandworm: congrats |
| 10:55.11 | sandworm | but - it really needs to merge 2 configs |
| 10:56.32 | sandworm | i've tried to merge myself, but it lost eth0 :( |
| 10:57.26 | koen | the kernel defconfig isn't optimal |
| 10:57.29 | koen | patches welcome :) |
| 10:57.45 | koen | my ep9312 board fell victim to utp shortage a while ago |
| 10:59.31 | sandworm | well, but would you tell me, why my working config fails build w/oe ? |
| 11:00.19 | XorA | wierd, when I build minimo /usr/bin and /usr/share are dissapering before getting into a package with no errrors from bitbake |
| 11:03.58 | *** join/#oe bluelightning (n=blueligh@222-155-154-163.jetstream.xtra.co.nz) |
| 11:09.03 | tkp | I'm can't get meta-sdk to build - getting the same problem as reported here: http://bugs.openembedded.org/show_bug.cgi?id=1938. |
| 11:09.03 | tkp | Reading through the mailing list tho, it seems that florian / koen had been working on this package recently |
| 11:09.09 | *** join/#oe greentux (n=lemke@p5493EFE1.dip.t-dialin.net) |
| 11:09.10 | *** join/#oe Sleep_Walker (n=Sleep@u-pl15.ms.mff.cuni.cz) [NETSPLIT VICTIM] |
| 11:09.10 | *** join/#oe memeruiz (n=memeruiz@e181026122.adsl.alicedsl.de) [NETSPLIT VICTIM] |
| 11:09.10 | *** join/#oe sandworm (n=sandworm@ppp1-301.ciscom.ru) [NETSPLIT VICTIM] |
| 11:09.10 | *** join/#oe rd_ (n=rd@segfault.net) [NETSPLIT VICTIM] |
| 11:09.10 | *** join/#oe pleemans (n=peter@d5152D19B.access.telenet.be) |
| 11:09.12 | *** join/#oe tomimo (n=kurre@a80-186-67-166.elisa-laajakaista.fi) |
| 11:09.12 | *** join/#oe mzb (n=ubernut@ppp108-88.static.internode.on.net) [NETSPLIT VICTIM] |
| 11:09.12 | *** join/#oe svolpe_gerrath (n=Gerrath_@unaffiliated/gerrath) |
| 11:09.13 | *** join/#oe ljp (n=lpotter@203.94.178.46) [NETSPLIT VICTIM] |
| 11:09.13 | *** join/#oe holtmann (n=holtmann@nikita.holtmann.net) [NETSPLIT VICTIM] |
| 11:09.13 | *** join/#oe joshua_ (i=joshua@c-24-60-144-77.hsd1.ma.comcast.net) [NETSPLIT VICTIM] |
| 11:09.13 | *** join/#oe victor_rx1950 (n=victor_d@85.195.145.138.satgate.net) [NETSPLIT VICTIM] |
| 11:09.14 | *** join/#oe JustinP (n=papercra@c-69-181-11-251.hsd1.ca.comcast.net) [NETSPLIT VICTIM] |
| 11:09.14 | *** join/#oe VoodooZ (n=palm3@modemcable045.249-81-70.mc.videotron.ca) [NETSPLIT VICTIM] |
| 11:09.14 | *** join/#oe kb7sqi (i=kb7sqi@cpe-071-071-104-054.triad.res.rr.com) |
| 11:09.14 | *** join/#oe apaulsen (n=apaulsen@64.122.73.112) [NETSPLIT VICTIM] |
| 11:09.14 | *** join/#oe cworth (n=cworth@c-67-160-161-141.hsd1.or.comcast.net) [NETSPLIT VICTIM] |
| 11:09.15 | *** join/#oe Shoragan (n=shoragan@datenfreihafen.org) [NETSPLIT VICTIM] |
| 11:09.15 | *** join/#oe aoe (n=aoe@tigerente.htu.tuwien.ac.at) [NETSPLIT VICTIM] |
| 11:09.15 | *** join/#oe reach (n=reach@sw169-210-231.adsl.seed.net.tw) [NETSPLIT VICTIM] |
| 11:09.15 | *** join/#oe hufnus (n=slonsiki@69-12-177-67.dsl.static.sonic.net) [NETSPLIT VICTIM] |
| 11:09.15 | *** join/#oe ggilbert (n=ggilbert@tinman.treke.net) [NETSPLIT VICTIM] |
| 11:09.15 | *** join/#oe koen|away (i=koen@dominion.kabel.utwente.nl) [NETSPLIT VICTIM] |
| 11:09.15 | *** join/#oe pht_ (n=pht@feynman.spatium.org) |
| 11:11.40 | tkp | koen: did it actually build for you in the end? |
| 11:13.58 | *** join/#oe pH5 (n=ph5@e178210246.adsl.alicedsl.de) |
| 11:14.58 | *** join/#oe gray (n=santeri@fw.tadcomab.se) |
| 11:16.14 | *** join/#oe greentux_ (n=lemke@ip-90-187-112-66.web.vodafone.de) |
| 11:22.29 | CIA-4 | 03coredump2 07org.oe.dev * ra4859537... 10/ (4 files in 2 dirs): altboot: Add SVNR44 which unb0rks reboot/shutdown for all Z and adds an advanced bootscript with multi-partition support for SL-C3x00. Not perfect yet but useable, feedback welcome |
| 11:23.40 | koen | tkp: haven't looked at it recently |
| 11:24.10 | hrw | ~lart lack of readline in uboot |
| 11:24.11 | ibot | blames lack of readline in uboot for all the evil in the world |
| 11:24.18 | tkp | ah ok. I'm thinking it's a problem with the kernel headers |
| 11:25.04 | tkp | trying to directly include a kernel header (sys/types.h in this case) is apparently the wrong thing to do - or so I have read |
| 11:26.34 | koen | uh oh, pxa breakage in mainline ahead.... |
| 11:26.45 | *** join/#oe thesing (n=kvirc@pankow.informatik.hu-berlin.de) |
| 11:28.57 | mrdata | hi thesing |
| 11:30.04 | thesing | hi mrdata |
| 11:30.40 | tkp | florian: did you get meta-sdk to build? |
| 11:30.50 | thesing | mrdata: did you do anything on sound yet? |
| 11:31.13 | Crofton | hrw, just add bash support to u-boot :) |
| 11:31.25 | pH5 | koen: I think it's a good thing. Means somebody looks at PXA from time to time. |
| 11:31.46 | mrdata | thesing: sorry, not yet, was ill for 5 days now ("magen-darm-grippe") |
| 11:31.59 | koen | pH5: it is a good thing, I just don't trust RMK with pxa |
| 11:32.22 | florian | tkp: Yes... well, I usually build the gpe one. |
| 11:32.24 | koen | since he has no pxa hardware and is prone to saying "pxa is broken, you fix it yourself" |
| 11:32.30 | *** join/#oe Sleep_Walker (n=Sleep@u-pl15.ms.mff.cuni.cz) |
| 11:32.53 | tkp | florian: hmm, and you didn't stumble into that bug (http://bugs.openembedded.org/show_bug.cgi?id=1938)? |
| 11:33.04 | florian | koen: hmm.. he used to have a NBP :-= |
| 11:33.40 | florian | tkp: i filed that one :) |
| 11:33.46 | tkp | ahh! |
| 11:33.51 | pH5 | koen: yes, you have a point there. |
| 11:33.53 | florian | tkp: but it should be fixed by now... |
| 11:34.12 | tkp | florian: I have a fresh chckout here and I'm still getting it |
| 11:34.29 | *** join/#oe vivijim (n=vivijim@200.184.118.132) |
| 11:34.44 | florian | tkp: maybe your distribution or local.conf pulls in a broken one. |
| 11:35.00 | tkp | florian: a broken what? |
| 11:35.36 | *** join/#oe Jin^eLD (n=jin@belief.htu.tuwien.ac.at) |
| 11:35.37 | Jin^eLD | huhu |
| 11:35.58 | florian | tkp: sdk compiler# |
| 11:36.00 | florian | oops |
| 11:36.26 | tkp | I have tried with both 4.1.1 and 4.1.2 |
| 11:41.59 | hrw | tkp: you builds sdk on amd64 or i386? |
| 11:42.26 | tkp | I'm building on an amd64 |
| 11:42.39 | tkp | (but with 32 bit os) |
| 11:46.51 | chouimat | morning |
| 12:06.19 | XorA | svn bitbake is busted |
| 12:07.28 | hrw | ~lart minicom for crappy scripts support |
| 12:07.28 | ibot | burns minicom to a crisp with a laser for crappy scripts support |
| 12:11.32 | *** join/#oe geekoid (n=geekoid@adsl-71-155-228-85.dsl.emhril.sbcglobal.net) |
| 12:13.51 | holtmann | koen: bluez-utils-3.10.1 has been released. |
| 12:15.14 | hrw | holtmann: koen already added them yesterday |
| 12:20.00 | holtmann | hrw: Btw. the --enable-bcm203x no longer exists. It has been deprecated a couple releases ago. |
| 12:20.02 | *** join/#oe mithro (n=tim@ppp246-117.static.internode.on.net) |
| 12:20.30 | holtmann | Also hciattach is ${sbindir}/hciattach. |
| 12:22.22 | hrw | ok |
| 12:23.17 | hrw | it will take some time to build it for me |
| 12:26.56 | *** join/#oe do13_ (n=do13@87.139.24.177) |
| 12:26.56 | do13_ | morning all |
| 12:26.56 | holtmann | The provided hcid.conf is crap. |
| 12:27.05 | holtmann | And outdated. |
| 12:27.41 | holtmann | No idea what 02dtl1_cs.sh is for, but that is a nasty hack, too. |
| 12:28.53 | holtmann | Please remove all of them from the *.bb file. |
| 12:37.00 | hrw | holtmann: make dtl1c_cs work with suspend/resume then I will remove that nasty hack |
| 12:37.34 | hrw | holtmann: it was the only way to get this crap card working after resume |
| 12:37.51 | hrw | hopefully my dtl1 based cf card died so I do not have this problem anymore |
| 12:38.00 | hrw | hi Dirk |
| 12:39.49 | hrw | do13_: did you tried wlan-ng 0.2.7 on tosa? |
| 12:40.15 | *** join/#oe thesing (n=kvirc@pankow.informatik.hu-berlin.de) |
| 12:41.31 | hrw | holtmann: but I will remove that script. |
| 12:42.31 | holtmann | hrw: For the latest bluez-utils-3.x versions it is not a good idea. Most of these expect a 2.6 kernel. |
| 12:45.03 | hrw | o.. my socket card works again.. few months ago stopped working in my Zaurus machines and 2.6.20 works |
| 12:45.23 | koen | XorA's serial fix? |
| 12:45.49 | koen | I'm pushing updates to bluez-utils, feel free to enhance further |
| 12:46.13 | hrw | koen: dtl1 does not give another uart |
| 12:46.27 | hrw | as /dev/ttyS* one |
| 12:51.10 | CIA-4 | 03koen 07org.oe.dev * rf77fcd9a... 10/ (4 files in 2 dirs): bluez-utils: enhance 3.10.1, move some stuff from include |
| 12:51.20 | CIA-4 | 03koen 07org.oe.dev * rd03e5ca1... 10/ (4 files in 3 dirs): |
| 12:51.20 | CIA-4 | libtool, autotools.bbclass: merge fixes for 1.5.10 from poky |
| 12:51.20 | CIA-4 | * NOTE: 1.5.22 has to be updated as well |
| 12:51.26 | koen | open issues with bluez-utils: hcid.conf and dtl script |
| 12:53.59 | Jin^eLD | is the imx31 supported in OE? it's ARM11, right? |
| 12:55.04 | hrw | Jin^eLD: mx31ads machine |
| 12:55.21 | Jin^eLD | cool |
| 12:55.43 | Jin^eLD | I have some hardware with WinCE, I'd like to try Angstrom on it :> |
| 12:56.08 | koen | a bit old, but should be working: http://www.angstrom-distribution.org/unstable/images/mx31ads/ |
| 12:56.33 | Jin^eLD | nice! thanks |
| 12:59.18 | koen | XorA: evince 0.9 is out, maybe it's faster :) |
| 12:59.30 | do13_ | hrw: 0.2.7 is old the newest one is 0.2.8 :) |
| 13:00.24 | Crofton | koen, working on libtool now |
| 13:00.29 | do13_ | hrw: I think I have 0.2.7 on my tosa |
| 13:00.33 | koen | Crofton: thanks |
| 13:00.47 | Crofton | once we work though all the issues, I usspect we will need to convert to a .inc file |
| 13:04.14 | hrw | do13_: I saw that 0.2.x got some suspend fixes |
| 13:06.01 | do13_ | hrw: It doesn't help tosa. The ohci driver need suspend fixes |
| 13:06.45 | do13_ | hrw: btw. can we drop all older version? no need for an 2.4 version :) |
| 13:09.23 | hrw | do13_: ah. and we lack ohci man |
| 13:10.02 | hrw | do13_: I would drop all 2.4-crapix stuff but some people wanted it to stay iirc |
| 13:10.03 | do13_ | hrw: this reminds me. I need to pester Chris |
| 13:10.30 | *** join/#oe greentux_ (n=lemke@ip-90-187-183-106.web.vodafone.de) |
| 13:10.54 | do13_ | hrw: Hmm, the kernel is gone, so we can remove the modules |
| 13:12.09 | hrw | probably can - which other device use such crap as wlan-ng? |
| 13:13.03 | hrw | koen: did you tried pata_pcmcia instead of ide_cs? |
| 13:13.21 | do13_ | I'ver never heard about other devices which are using the wlan-ng usb driver |
| 13:13.33 | *** join/#oe pleemans (n=peter@d5152D19B.access.telenet.be) |
| 13:13.42 | koen | hrw: no, since dwery didn't complete the driver for ep93xx and ixp4xx |
| 13:37.39 | *** join/#oe frank7d (n=afs@p549F889F.dip0.t-ipconnect.de) |
| 13:38.15 | koen | Jin^eLD: http://www.angstrom-distribution.org/repo/?action=details&pnm=mediatomb :) |
| 13:38.56 | Jin^eLD | cool, thanks :) |
| 13:39.13 | *** join/#oe soffa (n=soffa@213.238.49.68) |
| 13:43.44 | *** join/#oe Sleep_Walker (n=Sleep@195.22.44.103.adsl.nextra.cz) |
| 13:45.21 | *** join/#oe stevenh (n=lews@65.167.23.2) |
| 13:52.18 | *** join/#oe psokolovsky (n=psokolov@empty-crossing.volia.net) |
| 13:53.25 | *** join/#oe wrobbie (n=rob@cm74.kappa84.maxonline.com.sg) |
| 13:55.20 | *** join/#oe minipanda (n=hzhang@211.167.77.119) |
| 13:56.04 | Laibsch | Can you guys compile gdb-cross or is it just me? |
| 13:56.26 | Laibsch | I am working on packaging for gdb and wanted to verify I did not break anything. |
| 13:56.41 | Laibsch | But it seems gdb-cross was broken from the start |
| 14:02.16 | *** join/#oe marciom (n=marcio@200.184.118.132) |
| 14:04.58 | mwester | do13_: Unslung is currently built using OE, and is stuck at 2.4.22 (due to the design requirement of compatability with the original Linksys firmware). |
| 14:05.52 | mwester | do13_: Please don't delete any support for 2.4, as it would require someone to spend a great deal of time to pull Unslung out of OE. |
| 14:06.15 | *** join/#oe aCiDBaSe (n=osantana@200.184.118.132) |
| 14:06.33 | do13_ | mwester: which wlan-ng version do you use? The newer version are also ready for 2.4 but won't work on the sharp 2.4 crappix kernel |
| 14:06.57 | koen | mwester: no one is proposing to remove 2.4 support from OE, just 2.4 support from a few recipes |
| 14:09.09 | mwester | Ok. As long as the "few recipes" don't break devices. The sad fact is that for many, many users, 2.4 is far from obsolete yet. |
| 14:09.42 | koen | mwester: look at the bright side: 2.2 is obsolete :) |
| 14:10.38 | *** join/#oe psokolovsky_ (n=psokolov@82.193.98.6) |
| 14:11.03 | Laibsch | mwester: Thanks for the reminder. I thought that indeed 2.4 was dead for OE |
| 14:11.43 | mwester | I wish it were. I actually attempted to pull Unslung out of OE at one point, because of this problem, but it proved to be a very difficult task. |
| 14:12.15 | hrw | someone remember how goes angstrom for nslu2? |
| 14:12.28 | hrw | I have unpacked nslu2 here |
| 14:13.54 | mwester | do13_: wlan-ng is not used on Unslung - I mistook your comments for a more general desire to remove 2.4 support from all of OE. My mistake. |
| 14:14.24 | do13_ | mwester: :) |
| 14:17.22 | koen | hrw: minimal-image should boot |
| 14:17.26 | Laibsch | hrw: I don't know what "crap" uses wlan-ng, but it is pulled in when building opie-image. Which is why I needed to fix it to continue compilation. BTW, got my mail? |
| 14:17.36 | koen | hrw: you'd probably want sysconf to be installed, though |
| 14:19.37 | hrw | Laibsch: wlan-ng is used on tosa |
| 14:20.21 | hrw | Laibsch: nope |
| 14:20.28 | hrw | no mail |
| 14:20.51 | hrw | koen: can you look at last my changes in poky? |
| 14:20.57 | hrw | this week is busy for me |
| 14:21.14 | hrw | ~curse xtscal for h3600_tsraw |
| 14:21.16 | ibot | May you be reincarnated as a Windows XP administrator, xtscal for h3600_tsraw ! |
| 14:22.33 | hrw | someone remember when it try to use /dev/h3600_tsraw instead of $TSLIB_TSDEVICE? |
| 14:23.06 | koen | iirc it always tries h3600_tsraw first |
| 14:23.40 | koen | http://www.openembedded.org/bonsai/query/author/hrw/?scm_id=6&exact=1 |
| 14:23.46 | hrw | here it does not try other stuff |
| 14:24.23 | *** join/#oe emte_ (n=emte@d64-180-45-14.bchsia.telus.net) |
| 14:27.05 | hrw | koen: oh-image-minimal boots to login prompt |
| 14:27.18 | hrw | I did not tested minimal-image in OE |
| 14:38.48 | *** join/#oe florian (n=fuchs@217.146.132.69) |
| 14:41.11 | Laibsch | hrw: Ah, then that is why. I was building a tosa opie-image for xjqian |
| 14:42.10 | Laibsch | hrw: resent |
| 14:42.51 | CIA-4 | 03koen 07org.oe.dev * r9d82b0b1... 10/ (1 packages/gimp/babl_svn.bb): babl: add svn version |
| 14:42.55 | *** join/#oe AMDPenguin (i=nobody@nat/amd/x-8cc8b6a3fcbc5de0) |
| 14:42.56 | CIA-4 | 03koen 07org.oe.dev * r7a5bcf08... 10/ (1 packages/gimp/gegl_svn.bb packages/gimp/babl_svn.bb): |
| 14:42.56 | CIA-4 | babl: fix PV |
| 14:42.56 | CIA-4 | gegl: add svn version |
| 14:43.00 | CIA-4 | 03koen 07org.oe.dev * r72f8aced... 10/ (1 packages/libidl/libidl_0.8.6.bb): |
| 14:43.01 | CIA-4 | libidl: merge r1698 from poky: |
| 14:43.01 | CIA-4 | libidl: use binconfig.bbclass to mangle paths instead of trying to it hand |
| 14:43.05 | CIA-4 | 03koen 07org.oe.dev * r32a6fec8... 10/ (1 packages/tasks/task-base.bb): |
| 14:43.05 | CIA-4 | task-base: merge r1692 from poky: |
| 14:43.06 | CIA-4 | task-boot: added modutils-initscripts and update-alternatives |
| 14:43.07 | CIA-4 | - busybox use update-alternatives |
| 14:43.09 | CIA-4 | - modutils-initscripts is small and needed for devices with kernel modules in minimal image |
| 14:43.11 | CIA-4 | 03koen 07org.oe.dev * r790494c2... 10/ (1 packages/avahi/avahi.inc packages/avahi/avahi_0.6.19.bb): |
| 14:43.15 | CIA-4 | avahi: merge r1686 from poky: |
| 14:43.17 | CIA-4 | avahi: added pidof to dependencies |
| 14:43.19 | koen | hrw: those ones? |
| 14:43.43 | *** join/#oe emte_ (n=emte@d64-180-45-14.bchsia.telus.net) |
| 14:49.20 | CIA-4 | 03koen 07org.oe.dev * r56ba7443... 10/ (1 packages/gimp/gegl_svn.bb): gegl: fix depends |
| 14:49.36 | hrw | koen: avahi one was found as bonus, task-boot were needed but you can boot even without them |
| 14:51.00 | zecke_ | koen: do you need a hand on perl for uclibc or did you resolve it? |
| 14:51.16 | koen | zecke_: I didn't resolve it |
| 14:53.57 | v8jlene | koen: Is this with the new uclibc you added? I've built 5.8.8 under uclibc 0.9.28 without problems. |
| 14:54.12 | koen | v8jlene: yes, with 0.9.29 |
| 14:54.28 | koen | likewise highlighted some config options that were needed, but it seems that wasn't enough |
| 14:55.05 | v8jlene | I'll look at getting 0.9.29 working for sh4 and then fix perl for it tomorrow. |
| 14:56.11 | koen | v8jlene: thanks |
| 15:09.52 | *** join/#oe mccarthy_ (n=mccarthy@granular.che.pitt.edu) |
| 15:21.42 | Jin^eLD | has anyone tried buildbot with OE? :> |
| 15:22.06 | *** join/#oe Sup3rkiddo (n=sudharsh@59.92.60.203) |
| 15:23.01 | *** join/#oe psokolovsky (n=psokolov@empty-crossing.volia.net) |
| 15:23.58 | koen | Jin^eLD: yes, o-hand has a buildbot running for their OE repo |
| 15:24.08 | koen | Jin^eLD: RP knows the details |
| 15:25.09 | hrw | and it is working quite good |
| 15:26.30 | Jin^eLD | I'm setting it up here, let's see if I succeed :> looks easy though, I guess I just have to get the environment right |
| 15:26.40 | Crofton | Is build bot any good? |
| 15:27.36 | *** join/#oe Kristoffer (n=Kristoff@cust-IP-8.data.tre.se) |
| 15:29.10 | Jin^eLD | Crofton: I had a hard time understanding its configuration, but once set up it is actually quite nice |
| 15:29.28 | Jin^eLD | you can make various builds and you get a HTML page with summary of which builds succeeded and which went wrong and stuff like that |
| 15:29.52 | Crofton | like tinderbox? |
| 15:29.56 | koen | like tinderbox? |
| 15:30.02 | CosmicPenguin | sounds like tinderbox |
| 15:30.06 | Crofton | yeah |
| 15:30.11 | Jin^eLD | Crofton: I am not familiar with tinderbox, but I heard that it is doing something similar |
| 15:30.25 | Crofton | it is in python at least |
| 15:30.29 | koen | like http://ewi546.ewi.utwente.nl/tinderbox/showbuilds.pl?tree=Angstrom :) |
| 15:30.43 | koen | (I disabled the tinderclient for my builds atm) |
| 15:30.44 | Crofton | where is our undergrad lackey? |
| 15:32.14 | Jin^eLD | I heard tinderbox stopped development, is that true? I think that was the reason I took buildbot, but I do not remember for sure anymore :) |
| 15:32.30 | koen | which version of tinderbox? |
| 15:32.37 | Crofton | exactly :) |
| 15:32.43 | koen | the mozilla dudes start another one everytime they change socks |
| 15:32.57 | Crofton | I looked into tinderbox, but my eyes started bleeding |
| 15:33.03 | Jin^eLD | :) |
| 15:33.09 | koen | right, it's perl done by mozilla coders |
| 15:33.19 | Crofton | at least buildbot has one web page |
| 15:33.34 | hrw | koen: do we have working angstrom nslu2 build? |
| 15:33.36 | NAbyss | koen: Sounds like a nightmare.. |
| 15:33.59 | koen | hrw: I only build for ixp4xx[bl]e, and those work |
| 15:34.36 | hrw | koen: I have nslu2 under desk and do not want to go to openslug but to angstrom directly |
| 15:34.43 | koen | right |
| 15:34.53 | hrw | so can I do it now? |
| 15:35.04 | koen | yes |
| 15:35.32 | hrw | great |
| 15:35.34 | koen | MACHINE=ixp4xxbe should do the same as MACHINE=nslu2be, but it actually works for !slugos |
| 15:35.41 | hrw | upslug2 installed |
| 15:37.27 | hrw | koen: default pass for root set? or passwordless available? |
| 15:38.35 | koen | should be passwordless |
| 15:40.51 | hrw | ok |
| 15:40.57 | *** join/#oe Sonic|Laptop (n=Garrett@cblmdm72-240-97-94.buckeyecom.net) |
| 15:41.39 | *** join/#oe psokolovsky_ (n=psokolov@82.193.98.6) |
| 15:41.52 | *** join/#oe VoodooZ (n=palm3@modemcable045.249-81-70.mc.videotron.ca) |
| 15:45.35 | *** join/#oe VoodooZ (n=palm3@modemcable045.249-81-70.mc.videotron.ca) |
| 15:46.50 | Crofton | RP, ping |
| 15:47.53 | *** join/#oe incinerator (n=sabine@ppp-82-135-11-180.dynamic.mnet-online.de) |
| 15:50.31 | *** join/#oe AvengerMoJo (n=alex@219.142.241.138) |
| 15:56.04 | hrw | koen: 9.3M is too big ;( |
| 15:56.22 | koen | that sounds like console-image |
| 15:56.50 | hrw | http://www.angstrom-distribution.org/unstable/images/ixp4xxle/ does not have other |
| 15:57.46 | *** join/#oe hvontres|poodle (n=hvontres@redhill.orthodyne.com) |
| 15:57.53 | koen | http://www.angstrom-distribution.org/unstable/images/ixp4xxbe/20070512/ |
| 15:58.25 | koen | the ethernet driver for ixp4xx that's going to be merged to mainline doesn't do LE |
| 15:58.49 | hrw | ok |
| 16:00.46 | *** join/#oe dmn (n=varoudis@85.72.80.164) |
| 16:02.44 | *** join/#oe csmanx (n=csman@190.40.203.100) |
| 16:03.30 | hrw | smacznego koen |
| 16:04.17 | *** join/#oe goxboxlive (n=goxboxli@176.84-48-210.nextgentel.com) |
| 16:12.37 | *** join/#oe woglinde (i=woglinde@e178101176.adsl.alicedsl.de) |
| 16:16.40 | mrdata | woglinde: hi |
| 16:20.28 | *** join/#oe rob_w (n=bob@p85.212.2.64.tisdip.tiscali.de) |
| 16:28.51 | *** join/#oe memenarsil (n=memeruiz@lapradig15.informatik.tu-muenchen.de) |
| 16:29.06 | woglinde | hi mrdata |
| 16:33.51 | woglinde | mrdata simpad has to wait |
| 16:33.58 | woglinde | I haver serval other task to do |
| 16:34.34 | mrdata | woglinde: no problem for me |
| 16:36.08 | woglinde | have you done anything so far? |
| 16:37.50 | mrdata | only my mmc-card driver works again with kernel 2.6, so my bluetooth and mmc-card works on the same time |
| 16:39.26 | mrdata | the other work is in oe ready, only the better touchscreen response patch is missing for now |
| 16:41.13 | mrdata | next task for me is to solve the ts-do-not-response after suspend/resume |
| 16:45.48 | *** join/#oe koen (n=koen@dominion.kabel.utwente.nl) |
| 16:48.13 | koen | interesting: http://butterfeet.org/?p=26 |
| 16:51.40 | *** join/#oe splat1 (n=splat1@rf1.splat1.com) |
| 16:55.40 | *** join/#oe HopsNBarley (n=hops@nslu2-linux/HopsNBarley) |
| 16:57.21 | *** join/#oe psokolovsky (n=psokolov@82.193.98.6) |
| 16:58.28 | *** join/#oe wobster (n=wobster@vpn103.hrz.uni-dortmund.de) |
| 17:05.46 | *** join/#oe thesing (n=tkunze@BAA200d.baa.pppool.de) |
| 17:06.33 | koen | Crofton__, Crofton|home: + file://rpath.patch;patch=1 \ <- could you add that? |
| 17:06.48 | Crofton__ | crap |
| 17:06.50 | *** join/#oe Crofton (n=balister@hc65217eb.dhcp.vt.edu) |
| 17:06.57 | koen | :) |
| 17:07.18 | Crofton | more to the point,, I should delete the line |
| 17:07.36 | Crofton | it was a failure ... |
| 17:08.05 | Crofton | cross, right? |
| 17:09.25 | koen | yes |
| 17:09.49 | Crofton | I am going to comment the line out for now |
| 17:09.52 | *** part/#oe wobster (n=wobster@vpn103.hrz.uni-dortmund.de) |
| 17:10.16 | Crofton | ~praise DEFAULT_PREFERENCE = "-1" |
| 17:10.28 | ibot | All hail DEFAULT_PREFERENCE = "-1"! |
| 17:13.01 | hrw | koen: installed openslug - angstrom image does not wanted to boot |
| 17:14.29 | Ifaistos | i am thinking of making a class that will add the svn checkout version as distro version, so i can set something like DISTRO_VERSION = ".dev-snapshot-${SVN_CO_DATE}" |
| 17:14.42 | chouimat | hi hrw koen and * |
| 17:14.52 | hrw | hi chouimat |
| 17:14.52 | Ifaistos | does anything similar exists ? |
| 17:15.00 | vivijim | koen I'm trying to use nokia800 machine without armv6. I added FEED_ARCH_nokia800 = "armv5te" to mamona.conf but it is not working and the package generated is for armv6. I've already tried to remove the armv6 argument from PACKAGE_EXTRA_ARCHS under nokia800.conf and it is not working too... I'm sure that is not the cache... what can be wrong? |
| 17:15.11 | hrw | chouimat: DATETIME is wrong? |
| 17:15.29 | hrw | vivijim: use proper tune in machine config |
| 17:15.34 | koen | vivijim: change the tune file |
| 17:15.37 | hrw | vivijim: or in that case not proper one |
| 17:15.44 | koen | hrw: it *is* using the proper tune file |
| 17:15.58 | koen | ~lart ARM NDAs |
| 17:15.58 | ibot | puts on some milking gloves. "All right, now, ARM NDAs, this won't hurt a bit...." |
| 17:16.19 | *** join/#oe rob__w (n=bob@p85.212.71.236.tisdip.tiscali.de) |
| 17:16.29 | hvontres|poodle | chouimat: what do you have nearby? |
| 17:16.54 | chouimat | hvontres|poodle: fast food ... and some ramen noodle, and cat food |
| 17:17.01 | hrw | koen: 15 19:24 < hrw> vivijim: or in that case not proper one |
| 17:17.09 | hvontres|poodle | koen: so what can't you tell us about :) |
| 17:17.22 | koen | hrw: sorry, irc lag |
| 17:17.27 | hrw | koen: happens |
| 17:17.41 | hvontres|poodle | chouimat: hmmm, I can see why you are having a hard time..... Chineese Takout? |
| 17:17.42 | koen | hvontres|poodle: luckily I don't have an NDA with arm :) |
| 17:18.04 | koen | hvontres|poodle: people can't integrate armv6 and armv7 emulation into qemu due to NDAs |
| 17:18.16 | chouimat | hvontres|poodle: I try to avoid this |
| 17:18.45 | chouimat | ROFL today's featured picture is good http://uncyclopedia.org/wiki/Main_Page |
| 17:20.26 | hvontres|poodle | chouimat: They must have used LOUSY compression :) |
| 17:21.30 | hrw | koen: after looking at openslug 3.10 rootfs content I know why angstrom is future for slug.. |
| 17:21.43 | chouimat | ? |
| 17:22.55 | *** join/#oe likewise (n=Leon_Woe@82-171-189-134.dsl.ip.tiscali.nl) |
| 17:23.38 | hvontres|poodle | chouimat: To get 400MB of Ace of Base tracks... |
| 17:30.46 | likewise | ola all |
| 17:31.29 | koen | hey likewise |
| 17:31.35 | likewise | hey koen |
| 17:33.44 | *** join/#oe vivijim (n=vivijim@200.184.118.132) |
| 17:33.46 | likewise | hi gerwinin! |
| 17:34.16 | *** join/#oe AvengerMoJo (n=alex@219.142.241.138) |
| 17:34.21 | Crofton | ~seen kergoth |
| 17:35.54 | ibot | kergoth is currently on #wowi-lounge (2d 14h 1m 47s) #oe (2d 14h 1m 47s) #wowace (2d 14h 1m 47s) #handhelds.org (2d 14h 1m 47s) #elinux (2d 14h 1m 47s). Has said a total of 111 messages. Is idling for 21m 34s, last said: 'sits right on top of my nquestlog and loottracker'. |
| 17:36.03 | likewise | Crofton: hello |
| 17:36.03 | Crofton | gm |
| 17:36.03 | kergoth | Crofton: hey |
| 17:36.05 | Crofton | hey |
| 17:36.06 | koen | hey kergoth |
| 17:36.06 | Crofton | just wondering if you were still alive |
| 17:36.06 | Crofton | I have a board running Integrity here |
| 17:36.06 | Crofton | trying to figure out how to fix it |
| 17:36.06 | Crofton | so it runs Linux :) |
| 17:36.07 | hrw | hi kergoth |
| 17:37.30 | *** join/#oe psokolovsky_ (n=psokolov@82.193.98.6) |
| 17:37.53 | kergoth | integrity is annoying |
| 17:38.00 | Crofton | heh |
| 17:38.07 | kergoth | gd is much, much more so, of course |
| 17:38.08 | kergoth | ;) |
| 17:38.18 | kergoth | what board is it? |
| 17:38.46 | Crofton | http://www.lyrtech.com/DSP-development/dsp_fpga/drcvirtex-4.php |
| 17:38.51 | Crofton | crap |
| 17:39.09 | Crofton | this one |
| 17:39.10 | Crofton | http://www.lyrtech.com/DSP-development/dsp_fpga/sffsdrdevelopmentplatform.php |
| 17:40.53 | hrw | ~lart kdrive for using 720x576 on vga screen |
| 17:40.54 | ibot | offers kdrive some herring for using 720x576 on vga screen |
| 17:41.56 | *** join/#oe pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 17:43.03 | hrw | cu |
| 17:43.08 | Crofton | l8r |
| 17:43.34 | hrw | so if someone has kdrive 1.2/1.3 working ok on device then he can call himself lucky |
| 17:44.05 | koen | hrw|gone: angstrom uses 1.2 :) |
| 17:44.51 | hrw|gone | I know |
| 17:44.55 | hrw|gone | bye |
| 17:45.40 | keesj | what is the mission on angstorm? |
| 17:46.02 | keesj | it sounds like ot tries to kick ass |
| 17:47.08 | zecke | koen|away: I understand the perl build failure |
| 17:58.40 | *** join/#oe psokolovsky__ (n=psokolov@82.193.98.6) |
| 17:58.51 | *** join/#oe greentux_ (n=lemke@p54B301E4.dip0.t-ipconnect.de) |
| 18:01.55 | *** join/#oe psokolovsky__ (n=psokolov@82.193.98.6) |
| 18:03.46 | *** join/#oe psokolovsky__ (n=psokolov@82.193.98.6) |
| 18:21.28 | zecke | koen|away: DO_C99_MATH need to be enabled to get perl building |
| 18:22.05 | *** join/#oe likewise (n=Leon_Woe@82-171-189-134.dsl.ip.tiscali.nl) |
| 18:22.21 | *** join/#oe zap (n=zap@16.170.249.ozerki.net) |
| 18:25.37 | *** join/#oe joaquim_pt_ (n=joaquim@213.63.0.227) |
| 18:26.43 | hvontres|poodle | zecke: Off hand, do you know of any recepies that use just a simple gcc call for do_compile ? I am wokring an a very simple little addon for altboot and would like to avoid having to create a makefile, etc |
| 18:27.41 | zecke | hvontres|poodle: well, take a look at shasum-native |
| 18:30.01 | hvontres|poodle | zecke: thanks :) |
| 18:30.29 | zecke | I hope I use ${CC} :} |
| 18:31.21 | hvontres|poodle | zecke: yes :) |
| 18:31.25 | *** join/#oe Bitmaster (n=Bitmaste@c-d061e253.325-1-64736c12.cust.bredbandsbolaget.se) |
| 18:32.10 | *** join/#oe psokolovsky (n=psokolov@empty-crossing.volia.net) |
| 18:33.11 | *** join/#oe timtimred (n=On3@62-31-181-7.cable.ubr02.chel.blueyonder.co.uk) |
| 18:33.57 | hvontres|poodle | zecke: what does the ':' do in do_configure? |
| 18:34.23 | zecke | it is the shell sign for doing nothing |
| 18:35.00 | hvontres|poodle | zecke: ahh, so it's the equivalent of do_configure() { } |
| 18:35.21 | zecke | do_configure() {} is not a valid shell function ;) |
| 18:35.27 | zecke | do_configure() { : } is at least I think it is |
| 18:37.07 | hvontres|poodle | zecke: Heh... but the other way seems to work too...see linux-rp.inc for do_rm_work |
| 18:38.21 | zecke | no idea :) |
| 18:48.21 | *** join/#oe greentux__ (n=lemke@pd956a57b.dip0.t-ipconnect.de) |
| 18:54.51 | *** join/#oe kristoffer (n=kristoff@cust-IP-14.data.tre.se) |
| 19:10.35 | *** join/#oe tmbinc (i=abcd@83.141.3.59) |
| 19:16.35 | *** join/#oe jmau (n=chatzill@p54a5884c.dip0.t-ipconnect.de) |
| 19:18.22 | *** join/#oe LoDown (n=LoDown@dsl093-230-108.lou1.dsl.speakeasy.net) |
| 19:29.10 | Jin^eLD | RP: ping |
| 19:30.11 | *** join/#oe jmau (n=chatzill@p54a5884c.dip0.t-ipconnect.de) |
| 19:36.13 | *** part/#oe apaulsen (n=apaulsen@64.122.73.112) |
| 19:40.58 | Jin^eLD | is anyone who tried buildbot with OE awake? :) I am trying to buildbot an OE image but it seems to be running out of memory, is 1gig really not enough or is something special required in the buildbot configuration? |
| 19:41.07 | Jin^eLD | did anyone have this problem? |
| 19:47.13 | *** join/#oe angom (n=angom@red-corp-201.143.54.251.telnor.net) |
| 19:47.45 | *** part/#oe angom (n=angom@red-corp-201.143.54.251.telnor.net) |
| 19:49.18 | RP | Jin^eLD: pong |
| 19:49.26 | RP | Jin^eLD: 1GB should be enough |
| 19:50.15 | Jin^eLD | RP: hmm, weird, libtool tries to fork and I get a cannot allocate memory error |
| 19:50.29 | RP | Jin^eLD: What is using all the memory? |
| 19:50.54 | Jin^eLD | good question, I guess I should try top while buildbot tries building |
| 19:51.00 | Jin^eLD | but that aborts so fast |
| 19:51.30 | Jin^eLD | I thought that I am maybe missing some setting in buildbot or something... but as I understand you did not really have to do anything in that regard? |
| 19:51.43 | RP | We autobuild poky with buildbot so it does work |
| 19:51.57 | RP | Jin^eLD: No, we use a standard buildbot |
| 19:52.13 | *** join/#oe darkschneider (n=gab@81-208-36-80.ip.fastwebnet.it) |
| 19:52.22 | Jin^eLD | how did you do it? just a ShellCommand with appropriate env {} and "bitbake myimage" ? |
| 19:53.03 | RP | Jin^eLD: yes |
| 19:53.29 | Jin^eLD | same here |
| 19:53.30 | Jin^eLD | hmm |
| 19:53.34 | Jin^eLD | well thanks, I'll keep digging |
| 20:02.16 | *** join/#oe jmau (n=chatzill@p54a5884c.dip0.t-ipconnect.de) |
| 20:11.26 | *** join/#oe psokolovsky_ (n=psokolov@empty-crossing.volia.net) |
| 20:20.38 | *** join/#oe tsdogs (n=twostupi@62.123.180.130) |
| 20:24.40 | *** join/#oe greentux__ (n=lemke@Z4721.z.pppool.de) |
| 20:33.48 | *** part/#oe xjqian (n=gordon@71-85-151-212.dhcp.stls.mo.charter.com) |
| 20:38.35 | *** join/#oe zecke (n=ich@91.64.161.147) |
| 20:44.51 | *** join/#oe idealm (n=ideal@c58-107-18-60.belrs2.nsw.optusnet.com.au) |
| 21:00.14 | *** join/#oe psokolovsky__ (n=psokolov@82.193.98.6) |
| 21:04.28 | *** join/#oe starkruz1 (n=jtd@adsl-76-208-23-5.dsl.sbndin.sbcglobal.net) |
| 21:10.27 | *** join/#oe psokolovsky__ (n=psokolov@82.193.98.6) |
| 21:10.55 | *** join/#oe grma (n=gruberm@80.109.191.226) |
| 21:14.04 | *** join/#oe lrg (n=liam@lrg2.demon.co.uk) |
| 21:14.20 | CM | mallums Scaling Xephyr with GL: http://butterfeet.org/?p=26 |
| 21:14.35 | CM | To simulate high dpi screens on a normal monitor :) |
| 21:21.26 | *** join/#oe florian (n=fuchs@84.245.179.137) |
| 21:23.44 | *** join/#oe psokolovsky (n=psokolov@empty-crossing.volia.net) |
| 21:30.12 | chouimat | Jesus is gone |
| 21:33.04 | XorA | morning |
| 21:35.29 | *** join/#oe koen (n=koen@dominion.kabel.utwente.nl) |
| 21:36.00 | *** join/#oe darkschneider (n=gab@81-208-36-80.ip.fastwebnet.it) |
| 21:42.17 | *** join/#oe starkruz1 (n=jtd@adsl-76-208-6-129.dsl.sbndin.sbcglobal.net) |
| 21:42.21 | *** join/#oe Crofton (n=balister@66-207-66-26.black.dmt.ntelos.net) |
| 21:47.17 | *** join/#oe starkruzr (n=jtd@adsl-76-208-6-129.dsl.sbndin.sbcglobal.net) |
| 22:03.07 | *** join/#oe psokolovsky_ (n=psokolov@empty-crossing.volia.net) |
| 22:25.26 | *** join/#oe Varoudis_ (n=varoudis@85.72.85.173) |
| 22:29.56 | *** part/#oe vivijim (n=vivijim@200.184.118.132) |
| 22:35.44 | CoreDump|home | hi |
| 22:36.51 | ljp | hi |
| 22:39.59 | *** join/#oe csmanx (n=csman@190.40.203.100) |
| 22:56.07 | *** join/#oe dmn (n=varoudis@87.203.144.113) |
| 23:03.06 | *** join/#oe marcan (i=1337@198.Red-83-54-248.dynamicIP.rima-tde.net) |
| 23:19.45 | *** join/#oe drw (n=drw@cpe-76-187-64-213.tx.res.rr.com) |
| 23:21.10 | hvontres|poodle | CoreDump|home: hey there :) |
| 23:22.20 | CoreDump|home | hey hvontres|poodle |
| 23:23.08 | hvontres|poodle | CoreDump|home: Quick SVN question: what is the best way to tag a revision? |
| 23:24.29 | CoreDump|home | svn copy svn+ssh://hentges.net/server/svn/public/altboot/trunk svn+ssh://hentges.net/server/svn/public/altboot/tags/v1-1-1-wip-20070323 |
| 23:25.14 | CoreDump|home | a tag is basically just a snapshot of a given source tree copied into tags/ |
| 23:27.13 | *** join/#oe marcan (i=1337@198.Red-83-54-248.dynamicIP.rima-tde.net) |
| 23:27.15 | hvontres|poodle | CoreDump|home: menu is almost there. I just need to implement some sort of time-out and of course do some testing :) |
| 23:27.30 | CoreDump|home | excellent |
| 23:27.38 | hvontres|poodle | ~hail ncurses... |
| 23:27.46 | ibot | ACTION bows down to ncurses... and chants, "I'M NOT WORTHY!!" |
| 23:27.47 | CoreDump|home | indeed |
| 23:28.00 | CoreDump|home | such a menu would allow ipaq support beside other interesting stuff |
| 23:29.00 | hvontres|poodle | CoreDump|home: that was the idea. Actually it was kind of koes's fault...he was complaining about alboot being like the phone menu at the bank :) |
| 23:29.14 | CoreDump|home | hehe |
| 23:29.20 | CoreDump|home | he is not too wrong =) |
| 23:30.08 | hvontres|poodle | CoreDump|home: well, he kind of exagerated the problem in the koen style of argument, but yes, I thought he had a good point :) |
| 23:53.33 | *** join/#oe mzb (n=ubernut@ppp108-88.static.internode.on.net) |
| 23:57.59 | *** join/#oe kristoffer (n=kristoff@80.251.207.36) |