| 00:06.52 | *** join/#oe mithro (~tim@202.191.111.52) |
| 00:11.01 | *** join/#oe cvs_ (cvs@crash48.student.utwente.nl) |
| 00:13.58 | *** join/#oe marcan_ (1337@80-26-156-179.adsl.nuria.telefonica-data.net) |
| 00:20.17 | *** join/#oe reenoo_ (~r@p5489DC1E.dip.t-dialin.net) [NETSPLIT VICTIM] |
| 00:20.17 | *** join/#oe cedric (~cedric@freeway.rd.francetelecom.com) [NETSPLIT VICTIM] |
| 00:20.17 | *** join/#oe molivier (~mac@195.36.134.53) |
| 00:20.17 | *** join/#oe lardman (~lardman@138.38.73.178) |
| 00:20.17 | *** join/#oe exastra (~go@c-24-21-152-246.hsd1.or.comcast.net) |
| 00:20.18 | *** join/#oe Kompo (~kimmo@sk2-38.tky.hut.fi) [NETSPLIT VICTIM] |
| 00:20.18 | *** join/#oe gb2 (~gbritton@fog.sekrit.org) [NETSPLIT VICTIM] |
| 00:23.53 | *** join/#oe kergoth_ (~kergoth@c-24-118-219-25.hsd1.mn.comcast.net) |
| 00:26.34 | *** join/#oe Geo_KM (~keith@bh02i525f01.au.ibm.com) |
| 00:30.20 | *** join/#oe Richard48 (~Anon@203.8.2.80) |
| 00:43.35 | *** part/#oe Richard48 (~Anon@203.8.2.80) |
| 00:48.03 | keturn | depmod is chanting about unresolved symbols for, um, pretty much every module I built. What did I forget to do? |
| 00:49.31 | keturn | including symbols like 'kfree' and 'sprintf'. |
| 00:53.06 | *** join/#oe synth (~cb@pcp838545pcs.venice01.fl.comcast.net) |
| 01:04.38 | *** join/#oe basstech (~basstech@ip68-227-131-221.br.br.cox.net) |
| 01:07.14 | reenoo_ | 'night all |
| 01:07.16 | *** join/#oe hufnus (~slonsiki@m493836d0.tmodns.net) |
| 01:16.44 | *** join/#oe ideal (~idealm_@222.65.117.167) |
| 01:25.15 | *** join/#oe skopii (~john@c-67-167-215-228.hsd1.il.comcast.net) |
| 01:30.03 | *** join/#oe raster (~raster@YahooBB219198104088.bbtec.net) |
| 01:39.33 | *** join/#oe noclouds (~mhfan@60.166.170.80) |
| 01:49.34 | *** join/#oe Mt (~aa@very.drunkendisorderly.com) |
| 01:49.44 | Mt | Old English is a fine beverage |
| 02:20.53 | *** join/#oe peteru-home (~peteru-ho@adsl-53-18.swiftdsl.com.au) |
| 02:24.53 | *** join/#oe BigAl (~bigal@220-253-116-144.ACT.netspace.net.au) |
| 02:35.30 | *** join/#oe treke|home (~ggilbert@68-66-243-62.ventca.adelphia.net) |
| 02:44.28 | *** join/#oe raster (~raster@vagw.valinux.co.jp) |
| 02:51.01 | *** join/#oe micropal (ident@139.80-202-82.nextgentel.com) |
| 03:13.42 | *** join/#oe Timelord (~TL@4.78.4.43) |
| 03:28.41 | *** join/#oe kergoth (~kergoth@c-24-118-219-25.hsd1.mn.comcast.net) |
| 03:42.51 | *** join/#oe leonidas (~leonidas@211.22.75.138) |
| 03:43.19 | *** join/#oe leonidas (~leonidas@211.22.75.138) |
| 03:59.39 | *** join/#oe ibot (ibot@apt.bot.TimRiker.active.supporter.pdpc) |
| 03:59.39 | *** topic/#oe is OpenEmbedded Developer Lounge | http://bugs.openembedded.org/ (l/p guest/guest) | This is not a distribution support channel | The OE mailing list is back, but everyone needs to resubscribe. | We have a bitbake-dev mailing list for discussions on the core. If you're interested in BitBake-Ng, please subscribe. | LCA 2005 Embedded Miniconf - http://www.openembedded.org/miniconf |
| 03:59.45 | *** join/#oe obi_ (~obi@B3114.karlshof.wh.tu-darmstadt.de) |
| 04:09.15 | *** join/#oe kergoth (~kergoth@c-24-118-219-25.hsd1.mn.comcast.net) |
| 04:21.33 | *** join/#oe J (~john@cpc2-mfld2-5-1-cust85.nott.cable.ntl.com) |
| 04:35.44 | *** join/#oe obi (~obi@B3114.karlshof.wh.tu-darmstadt.de) |
| 05:13.00 | *** join/#oe pH5 (~ph5@e178219174.adsl.alicedsl.de) |
| 05:17.37 | *** join/#oe Jenna (~cherryRed@209.8.233.202) |
| 05:18.38 | *** part/#oe Jenna (~cherryRed@209.8.233.202) |
| 05:21.20 | *** join/#oe __law__ (~law@mail.stiftadmont.at) |
| 05:22.38 | *** join/#oe molivier2 (~mac@d03v-12-167.d4.club-internet.fr) |
| 05:34.11 | *** join/#oe stealth (~stealth@user-0c6sdm3.cable.mindspring.com) |
| 05:45.56 | jacques | as I anticipated, sl-c3100 pushed down the prices of the sl-c3000 and sl-c1000 : http://www.geekstuff4u.com/index.php?cPath=24_53 |
| 05:57.56 | stealth | im trying to recompile ppp with the patch here http://www.eskimo.com/~roger/files/doc/howto-gc82.html#Hack%20the%20ppp%20auth%20source%20code for my pcmcia celluar card, i believe my oe environment is setup good; BBPATH and BBFILES yet when I bitbake ppp I get this: http://pastebin.ca/14589 |
| 06:08.34 | *** join/#oe micropal_ (ident@139.80-202-82.nextgentel.com) |
| 06:11.24 | *** join/#oe treke|home (~ggilbert@68-66-243-62.ventca.adelphia.net) |
| 06:19.34 | *** join/#oe Jena (~cherryRed@209.8.233.202) |
| 07:00.00 | *** join/#oe do13 (~dirk@do13.in-dsl.de) |
| 07:01.15 | do13 | morning |
| 07:10.41 | *** join/#oe obi (~obi@B3114.karlshof.wh.tu-darmstadt.de) |
| 07:14.11 | *** join/#oe BigAl (~bigal@220-253-116-144.ACT.netspace.net.au) |
| 07:27.18 | RP | morning all |
| 07:28.40 | do13 | morning RP |
| 07:33.27 | *** join/#oe minipanda (~zhanght@221.122.51.131) |
| 07:34.06 | *** part/#oe minipanda (~zhanght@221.122.51.131) |
| 07:35.10 | *** join/#oe Jenna (~cherryRed@209.8.233.206) |
| 07:35.24 | *** part/#oe Jenna (~cherryRed@209.8.233.206) |
| 07:43.17 | *** join/#oe bluelightning (~bluelight@203-173-245-188.akl.ihugultra.co.nz) |
| 08:35.09 | hrw|work | morning |
| 08:36.14 | RP | hi hrw|work |
| 08:36.34 | do13 | morning hrw|work |
| 08:46.52 | bluelightning | hi hrw|work, RP, do13 |
| 08:49.40 | hrw|work | ~nslookup home.hrw.one.pl |
| 08:49.44 | *** join/#oe schurig (~schurig@p54B2A5E4.dip0.t-ipconnect.de) |
| 08:49.55 | hrw|work | ibot: gracias |
| 08:49.56 | ibot | i guess gracias is thank you |
| 08:49.59 | hrw|work | hi schurig |
| 08:50.02 | schurig | hrw|work: hi! |
| 08:50.32 | schurig | mickey|sports: bbimage has a bug, it creates the log.image_cmd.* and run.image_cmd.* files directly in TMPDIR |
| 08:51.19 | bluelightning | hi schurig |
| 08:51.31 | schurig | bluelightning: hiho |
| 08:52.00 | hrw|work | ~nslookup home.hrw.one.pl |
| 08:52.35 | hrw|work | noip works |
| 08:53.28 | hrw|work | openwrt use busybox init.. it so simple that looks strange for me |
| 08:55.51 | schurig | hrw|work: hey, I just see that you are also in Bitbake at Berlios. When you delete the line data.setVar('T', '${TMPDIR}', localdata) near the end of bitbake/bin/bbimage, then the log&run file will be created at the usual place |
| 08:58.57 | CoreDump|home | moin |
| 08:59.51 | hrw|work | schurig: you are not in devel list of bitbake? |
| 08:59.54 | hrw|work | hi CoreDump|home |
| 09:00.01 | bluelightning | hi CoreDump|home |
| 09:03.00 | schurig | hrw|work: unfortunately not |
| 09:03.13 | *** join/#oe UdontKnow (udontknow@udontknow.staff.freenode) |
| 09:03.15 | schurig | hrw|work: I didn't ask kergoth`zzz so far, when I'm online he's sleeping |
| 09:03.49 | schurig | hrw|work: for OE itself, we have several "project managers" that can add users, but for bitbake he's the only one that can add people |
| 09:05.42 | *** join/#oe koen (~koen@cl-148.ams-05.nl.sixxs.net) |
| 09:05.53 | bluelightning | hi koen |
| 09:06.02 | koen | good morning all |
| 09:06.13 | koen | hey bluelightning |
| 09:06.14 | RP | hi koen |
| 09:06.23 | koen | hey RP |
| 09:06.52 | CoreDump|home | hi koen |
| 09:06.56 | hrw|work | schurig: ok - will look |
| 09:06.57 | koen | hey CoreDump|home |
| 09:09.40 | CIA-4 | 03CoreDump 07 * r1.3523.1.1 10openembedded/packages/altboot/ (3 files in 3 dirs): altboot: Add a timeout on boot and only show the menu when requested |
| 09:10.10 | bluelightning | who maintains network-suspend-scripts (no MAINTAINER set)? |
| 09:10.30 | hrw|work | noone? |
| 09:10.53 | *** join/#oe micropal (ident@139.80-202-82.nextgentel.com) |
| 09:11.24 | bluelightning | I was wondering what /etc/default/usbd was intended to do (it's referred to by /etc/apm/scripts.d/usbnet) |
| 09:13.09 | hrw|work | bluelightning: it keep name of usbd module on Zaurus |
| 09:13.22 | hrw|work | sa1100_bi on collie, pxa_bi on pxa zauruses |
| 09:14.01 | bluelightning | is sa1100usb_core also used on collie? |
| 09:14.29 | hrw|work | no |
| 09:14.43 | bluelightning | hmm ok |
| 09:15.50 | bluelightning | I wonder if that script needs to be reworked a bit... currently I'm looking at how to change it to handle g_ether on pxa iPAQs, and it would seem to me that some editable script like /etc/default/usbd would be the way to choose what module to use (g_ether or usb-eth) |
| 09:15.51 | CIA-4 | 03hrw * r254 10bitbake/bin/bbimage: Keep all temporary files in proper place not in TMPDIR (patch by Holger Schurig) |
| 09:16.15 | bluelightning | obviously I don't want any patch to screw it up for zaurus users either |
| 09:16.52 | hrw|work | bluelightning: under 2.6 g_ether survive suspend/resume (atleast on Z) |
| 09:17.11 | hrw|work | no network-suspend-scripts are not needed |
| 09:17.39 | hrw|work | s/^no/so |
| 09:17.41 | bluelightning | with 2.4 the ported g_ether is often non-functional on my h3970 |
| 09:17.52 | bluelightning | non-functional after resume, I mean |
| 09:18.01 | bluelightning | unloading it and loading it fixes that |
| 09:18.06 | hrw|work | aha |
| 09:18.20 | hrw|work | usb gadget backport to 2.4.. nice |
| 09:18.40 | bluelightning | yeah, it works well, especially to be able to connect to WinXP for those who want that |
| 09:23.40 | *** join/#oe zinga (~arnaudb@186.80-203-227.nextgentel.com) |
| 09:33.25 | *** join/#oe qfh (~qfh@ppp-82-135-2-212.mnet-online.de) |
| 09:34.54 | *** join/#oe ade|desk (~adavey@194.200.143.249) |
| 09:37.16 | *** join/#oe pb_ (~pb@2002:5246:d929:1:20a:5eff:fe00:391e) |
| 09:39.22 | hrw|work | hi pb |
| 09:39.50 | pb_ | hi hrw|work |
| 09:39.57 | pb_ | morning all |
| 09:40.55 | ade|desk | morning all |
| 09:41.06 | bluelightning | hi ade|desk, pb_ |
| 09:55.12 | *** join/#oe marcan (1337@80-28-117-189.adsl.nuria.telefonica-data.net) |
| 09:56.28 | hrw|work | mickey|sports: bitbake interactive lack "get" |
| 09:56.36 | hrw|work | getvar even |
| 09:56.55 | hrw|work | ops.. there is a print.. |
| 09:57.36 | mickeyl | ya, there's print |
| 09:57.38 | mickeyl | morning, btw. |
| 09:57.58 | hrw|work | NOTE: [11:54] package gcc-cross-4.0.0: failed |
| 09:58.02 | hrw|work | BB>> print PREFFERED_VERSION_gcc-cross |
| 09:58.02 | hrw|work | 3.4.4 |
| 09:58.27 | koen | hey mickeyl |
| 09:58.28 | CIA-4 | 03koen 07 * r1.3535 10openembedded/packages/maemo/ (10 files in 6 dirs): |
| 09:58.28 | CIA-4 | Many meamo files: source -> ., courtesy Florian Boor |
| 09:58.28 | CIA-4 | Add gconf-osso, part of the maemo.org suite, courtesy Florian Boor |
| 09:58.30 | CIA-4 | 03koen 07 * r1.3534 10openembedded/packages/base-files/ (base-files_3.0.14.bb base-files/nokia770/fstab): base-files_3.0.14.bb: support nokia770, courtesy Florian Boor |
| 09:58.58 | pb_ | mickeyl: good morning |
| 09:59.00 | hrw|work | ~lart me |
| 10:01.54 | *** join/#oe dkey (~dkey@193.170.48.234) |
| 10:03.12 | hrw|work | mickeyl: can getvar be alias to print? |
| 10:03.35 | mickeyl | hrw|work: sure. |
| 10:03.43 | mickeyl | while we are talking about that... |
| 10:03.55 | bluelightning | hi mickeyl |
| 10:03.59 | mickeyl | setvar/getvar deals with outer env. variables |
| 10:04.05 | mickeyl | how to deal with package specific data ? |
| 10:04.08 | mickeyl | pkggetvar? |
| 10:04.29 | mickeyl | doens't look good to me |
| 10:04.30 | hrw|work | no idea - didtn had to tweak them |
| 10:04.58 | mickeyl | in my tree, i have made print to work with package data |
| 10:05.08 | mickeyl | print nano do_package |
| 10:05.35 | mickeyl | i may do it with 'peek' and 'poke' |
| 10:05.40 | mickeyl | as a reminiscent to the old C64 days |
| 10:05.41 | mickeyl | heh |
| 10:05.45 | pb_ | heh |
| 10:06.02 | schurig | mickeyl: to old PET2001 days |
| 10:06.11 | hrw|work | old 8bit BASIC days |
| 10:06.13 | schurig | that one was earlier with peek and poke |
| 10:06.14 | mickeyl | right from PET over VIC20 to C64 |
| 10:06.35 | pb_ | I guess you should make "sys 49152" do something exciting, in that case. |
| 10:06.48 | schurig | sys 6502,n was also nice |
| 10:06.51 | pb_ | not sure what, maybe display an ascii art picture of kergoth or something. |
| 10:07.01 | mickeyl | heh |
| 10:07.11 | mickeyl | wasn't it ? sys 64738 ? |
| 10:07.15 | mickeyl | to reboot |
| 10:07.33 | pb_ | ah yes, right |
| 10:07.47 | mickeyl | 49152 was the base address for the gfx controller if I remember correctly |
| 10:07.59 | mickeyl | long time ago |
| 10:08.14 | schurig | mickeyl: sys 6502,n printed some text n-times out, I think it was Microsoft or Basic or something |
| 10:14.56 | lardman|work | I have a package which wants to use makeinfo and latex in its Makefile, now some people will have these available, some won't (like me) |
| 10:15.13 | lardman|work | I suppose I should add these as -native packages and make then DEPENDS? |
| 10:15.16 | mickeyl | if its just for docs, disable it |
| 10:15.23 | lardman|work | ah, ok |
| 10:15.27 | lardman|work | phew ;) |
| 10:15.49 | pb_ | yeah, native latex might be too much. |
| 10:16.13 | pb_ | if you'd like to have a go at adding it, though, feel free. |
| 10:17.43 | hue | hello, anyone can explain what is the meaning of "INHERIT"? |
| 10:18.36 | pb_ | it contains a list of classes to be inherited. |
| 10:19.04 | lardman|work | pb_: hmm, got a few things to sort out first ;) |
| 10:19.15 | CIA-4 | 03mickeyl 07 * r1.3536 10openembedded/packages/mathomatic/ (mathomatic_unstable.bb mathomatic_12.4.2.bb mathomatic.inc): add mathomatic, a small, portable, general purpose CAS. Patch courtesy Simon Pickering |
| 10:19.24 | lardman|work | thx mickeyl |
| 10:19.36 | mickeyl | np. can you clos the bug? |
| 10:19.40 | mickeyl | close even |
| 10:19.50 | hue | pb_, thx |
| 10:20.11 | lardman|work | yep - give me a tick to work out how |
| 10:20.31 | pb_ | mickeyl: you should be able to close the bug yourself |
| 10:21.04 | lardman|work | change it to 'fixed'? |
| 10:21.09 | pb_ | right |
| 10:21.18 | mickeyl | pb_: sure i am... i wanted to delegate that though ;) |
| 10:21.23 | pb_ | ah, heh |
| 10:21.44 | mickeyl | lardman|work: take a look at the changeset, i've added a .inc for the similarities |
| 10:22.28 | lardman|work | ok, sorry about that - I've got a few different bbs in various states of finishedness and wanted to get that one out so I could forget about it |
| 10:22.46 | mickeyl | np, just a recommendation for similar cases in the future |
| 10:22.52 | lardman|work | I think I've closed it now, takes enough different stages though! |
| 10:23.02 | mickeyl | pb_: i'm getting to like bugzilla |
| 10:23.38 | mickeyl | i had my reservations, but once you get started it turns out nice |
| 10:24.56 | pb_ | lardman|work: just marking it as RESOLVED FIXED is sufficient. |
| 10:25.18 | pb_ | there is no need to change it from RESOLVED to CLOSED. |
| 10:25.31 | lardman|work | pb_: ok |
| 10:25.37 | pb_ | mickeyl: excellent :-) |
| 10:26.50 | lardman|work | pb_: wrt xlibs and dietx, is there a way of making the full-fat ones a DEPEND rather than whichever the user is building with (as diet won't work)? |
| 10:29.35 | lardman|work | Or should I just add a comment to the .bb which someone will presumably read if it won't build? |
| 10:30.18 | pb_ | lardman|work: not at the moment. that's a bit of a hole in our xlibs packaging. |
| 10:31.04 | lardman|work | pb_: I'll add the comment then |
| 10:32.10 | pb_ | righto |
| 10:39.33 | hrw|work | heh... microsoft have router/AP powered by WinCE... |
| 10:47.49 | schurig | mickey|lunch: mathomatic looks cool |
| 10:47.56 | schurig | (for a console app ...) |
| 10:49.00 | *** join/#oe Jenna (~cherryRed@209.8.233.248) |
| 10:50.41 | lardman|work | I thought it looked interesting |
| 10:51.05 | lardman|work | How can one perform patching after configure has been run? |
| 10:51.12 | lardman|work | (just out of interest) |
| 10:51.46 | hrw|work | lardman|work: addtask extrapatching after configure and do_extrapatching() { .... } |
| 10:51.59 | lardman|work | ok, cool |
| 10:51.59 | hrw|work | "addtask extrapatching after configure" |
| 10:52.27 | hrw|work | hmm.. gcc-cross 3.4.4 failed for wrt54 ;( |
| 10:54.06 | pb_ | I think you need "addtask extrapatching after do_configure before do_compile" or some such. |
| 10:55.32 | CIA-4 | 03koen 07 * r1.3537 10openembedded/packages/ (7 files in 3 dirs): |
| 10:55.32 | CIA-4 | sapwood_1.20-1.bb: extra install_append, courtesy Florian Boor |
| 10:55.32 | CIA-4 | osso-gnome-vfs2_2.8.4.4-1.bb: adjust depends, courtesy Florian Boor |
| 10:55.32 | CIA-4 | Many files: added, courtesy Florian Boor |
| 10:55.32 | CIA-4 | hildon-libs_0.9.6-2.bb: adjust staging, courtesy Florian Boor |
| 10:58.50 | hrw|work | mickey|lunch: http://pastebin.ca/14610 |
| 10:59.44 | hrw|work | mickey|lunch: in other words: bug #88 strikes back |
| 11:11.34 | *** join/#oe mrz80 (1000@caledonia.cns.ufl.edu) |
| 11:14.32 | hrw|work | mickey|lunch: http://pastebin.com/299783 - bitbake -i failed when had to post large log |
| 11:15.32 | *** join/#oe Jenna (~cherryRed@209.8.233.253) |
| 11:22.03 | *** join/#oe wrobbie (~rob@cm17.sigma183.maxonline.com.sg) |
| 11:23.39 | hrw|work | keturn: ping |
| 11:25.10 | *** join/#oe raster (~raster@YahooBB219198104088.bbtec.net) |
| 11:27.36 | hrw|work | how to get gcc-cross build for mipsel? |
| 11:27.44 | hrw|work | mipsel/uclibc |
| 11:31.11 | *** join/#oe stevenh (~xev@65.167.23.2) |
| 11:31.32 | *** part/#oe UdontKnow (udontknow@udontknow.staff.freenode) |
| 11:36.38 | *** join/#oe Jenna (~cherryRed@209.8.233.248) |
| 11:36.47 | *** join/#oe raster (~raster@YahooBB219198104088.bbtec.net) |
| 11:38.13 | hrw|work | someone built gcc-cross 3.4.4 with uclibc recently? |
| 11:38.35 | *** join/#oe ade|desk (~adavey@194.200.143.249) |
| 11:38.54 | ade|desk | grr fecking xerox, lo all btw |
| 11:39.05 | hrw|work | morning ade |
| 11:39.37 | *** join/#oe micropal_ (ident@139.80-202-82.nextgentel.com) |
| 11:39.45 | hrw|work | http://www.hrw.one.pl/_pliki/oe/tmp/gcc-cross-mipsel-uclibc.error.txt is my error output which I got when trying to build |
| 11:44.14 | ade|desk | hrw|work: i seem to remember something on the uclibc ml about 3.4.4 and mips ... but can't find it atm |
| 11:44.20 | ade|desk | will keep looking |
| 11:44.52 | hrw|work | I can test 3.4.3 |
| 11:46.34 | ade|desk | i know that 3.4.2 is a working one |
| 11:47.57 | ade|desk | uclibc 0.9.27 or svn btw ? |
| 11:48.04 | hrw|work | 0.9.27 |
| 11:48.10 | ade|desk | righty ho |
| 11:48.22 | hrw|work | I want to get builddir for my wrt54gs |
| 11:49.08 | hrw|work | openwrt use 3.4.3 or 3.4.4 |
| 11:49.11 | ade|desk | ah the openwrt OE'ed |
| 11:49.40 | ade|desk | hmm ok will search uclibc ml harder then ;) |
| 11:51.21 | *** join/#oe ideal (~idealm_@218.82.61.230) |
| 11:51.24 | hrw|work | not quite OE'ed.. they use own buildsystem |
| 11:51.25 | *** join/#oe Archer (none@195.7.13.33) |
| 11:51.42 | Archer | hi guys |
| 11:54.19 | Archer | i'm having a problem with bitbake (gcc-cross and opie-image for now) - the flex-native-2.5.31 package is missing (404) - what mirror should i specify for it? |
| 11:55.51 | hrw|work | heanet? |
| 11:56.25 | hrw|work | it is default one, it has flex-2.5.31.tar.bz2 archive (just downloaded to test) |
| 11:56.26 | *** join/#oe Jenna (~cherryRed@209.8.233.246) |
| 11:57.24 | *** join/#oe zecke_ (fakeuser@p54BD391A.dip0.t-ipconnect.de) |
| 11:59.17 | *** part/#oe Jenna (~cherryRed@209.8.233.246) |
| 12:00.29 | Archer | hrw|work: so instead of GNU_MIRROR = "ftp://ftp.gnu.org/gnu" in local.conf it will be "ftp.heanet.ie/mirrors/ftp.gnu.org/"? (that dir looks empty to me) |
| 12:01.53 | koen | flex will be fetched from sourceforge |
| 12:03.08 | *** join/#oe cedric (~cedric@freeway.rd.francetelecom.com) |
| 12:04.09 | hrw|work | Archer: flex is from SOURCEFORGE_MIRROR |
| 12:05.23 | ade|desk | hrw|work: do you have gcc-cross-initial ? |
| 12:05.55 | hrw|work | ade|desk: yes |
| 12:06.04 | *** join/#oe jumpkick_ (~chatzilla@toronto-HSE-ppp3985570.sympatico.ca) |
| 12:06.57 | jumpkick_ | what do I do after bitbake opie-image finishes to make an initrd.bin and a zImage? |
| 12:07.02 | Archer | hrw|work: thanks - trying with ftp.heanet.ie/mirrors/download.sourceforge.net/ |
| 12:07.42 | jumpkick_ | I've got two scripts in /stuff/build/tmp: run.image_cmd.30422 run.image_cmd.30425 |
| 12:07.56 | Archer | jumpkick_: if i'm not mistaken the zImage is the kernel image - you need to transfer them to the device/board somehow (i've just started so I don't know any more) |
| 12:08.39 | hrw|work | Archer: remove SOURCEFORGE_MIRROR setting from your local.conf and it will work |
| 12:08.44 | ade|desk | hrw|work: have you tried without make -j 4 ? |
| 12:08.49 | hrw|work | jumpkick_: ignore |
| 12:08.51 | hrw|work | ade|desk: not yet |
| 12:09.36 | hrw|work | ade|desk: rebuilding... |
| 12:10.00 | jumpkick_ | ignore? |
| 12:10.14 | jumpkick_ | sec |
| 12:10.22 | jumpkick_ | think I found it in deploy.... |
| 12:10.57 | hrw|work | jumpkick_: recent bitbake put that files in correct place now |
| 12:10.58 | jumpkick_ | looks too small though: -rw-r--r-- 1 bitbake bitbake 9.7M 2005-06-14 23:26 opie-image-collie-20050613055205.rootfs.tar.bz2 |
| 12:11.22 | jumpkick_ | nevermind |
| 12:11.28 | jumpkick_ | the one above it is 14M |
| 12:11.30 | jumpkick_ | good stuff |
| 12:11.41 | hrw|work | jumpkick_: jffs2 are padded |
| 12:12.07 | jumpkick_ | gotya, so the padding compresses really well I'd guess then |
| 12:12.13 | *** join/#oe mithro (~tim@ppp226-233.lns3.adl2.internode.on.net) |
| 12:13.56 | hrw|work | its 0 |
| 12:14.06 | koen | initrds need to be ext2.gz or cramfs |
| 12:16.37 | hrw|work | ade|desk: same ;( |
| 12:17.46 | *** join/#oe zecke (fakeuser@p54BD39BD.dip0.t-ipconnect.de) |
| 12:18.21 | ade|desk | ok, am getting an OE tree atm, will then take a look at making a mipsel toolchain |
| 12:19.44 | hrw|work | thx ade |
| 12:22.25 | ade|desk | this may take some time... am at the wrong office today for this sort of thing :( |
| 12:22.35 | hrw|work | happens |
| 12:22.40 | hrw|work | I can wait |
| 12:22.51 | hrw|work | have router to configure ;) |
| 12:22.55 | ade|desk | days at this rate |
| 12:23.10 | *** join/#oe zecke__ (fakeuser@p54BD2F02.dip0.t-ipconnect.de) |
| 12:24.10 | ade|desk | oh dear packages/opie could take a while |
| 12:28.20 | jumpkick_ | wooohooo! |
| 12:40.08 | jumpkick_ | hmm... doesn't mount SD... :( |
| 12:40.38 | jumpkick_ | hangs in /bin/sh /etc/sdcontrol insert |
| 12:41.14 | jumpkick_ | gotta go to work... |
| 12:59.48 | *** join/#oe mickey|lunch (~mickey@deneb.tm.informatik.uni-frankfurt.de) |
| 13:01.54 | *** join/#oe ideal_ (~idealm_@218.82.61.230) |
| 13:04.30 | Archer | hrw|work: removed the sourceforge declaration, but it still tries to get flex from oesources.org |
| 13:04.48 | hrw|work | Archer: a... |
| 13:05.12 | hrw|work | Archer: why you didnt said that on start... |
| 13:05.16 | Archer | should I'll try with ftp.heanet.ie/mirrors/download.sourceforge.net/sourceforge |
| 13:05.16 | Archer | <PROTECTED> |
| 13:05.41 | hrw|work | you can comment CVS_TARBALL_STASH so it will be fetched from upstream location not from our source mirror |
| 13:05.45 | hrw|work | keturn: hi |
| 13:05.47 | hrw|work | kergoth: hi |
| 13:06.02 | hrw|work | kergoth: can you add schurig to bitbake at berlios? |
| 13:06.15 | schurig | kergoth: hi! |
| 13:06.22 | kergoth | hey |
| 13:06.27 | *** join/#oe Jenna (~cherryRed@209.8.233.14) |
| 13:06.39 | kergoth | been a long time since i've woken up at 8am. |
| 13:06.50 | *** part/#oe Jenna (~cherryRed@209.8.233.14) |
| 13:07.23 | Archer | hrw|work: trying |
| 13:11.06 | kergoth | schurig: whats your berlios username? |
| 13:11.15 | schurig | kergoth: holgerschurig |
| 13:11.19 | kergoth | k |
| 13:12.27 | koen | good morning kergoth |
| 13:14.40 | hrw|work | keturn: ping |
| 13:29.18 | *** join/#oe Jenna (~cherryRed@209.8.233.250) |
| 13:31.35 | *** join/#oe marcan_ (1337@110.Red-83-53-0.pooles.rima-tde.net) |
| 13:40.43 | *** join/#oe bipolar (~bflong@146.145.26.90) |
| 13:44.07 | ade|desk | hrw|work: sorry for the delay .. still getting gcc |
| 13:44.31 | hrw|work | ade|desk: no problem |
| 13:44.49 | hrw|work | heh.. my network cards does not support WOL :( |
| 13:45.10 | hrw|work | will have to enable via-rhine one (onboard) and check does it support wol |
| 13:45.16 | pb_ | hi kergoth |
| 13:45.25 | ade|desk | hrw|work: why do you need WOL ? |
| 13:46.59 | hrw|work | ade|desk: I can remote login to my router so if I will need to have my home machine working then ssh router, wake home machine |
| 13:47.39 | ade|desk | ah groovy |
| 13:49.26 | Archer | hrw|work: flex is still still missing (even with CVS_TARBALL_STASH commented) - actual dl location is mesh.dl.sf.net |
| 13:56.35 | hrw|work | Archer: how you set mesh? |
| 13:56.50 | Archer | mesh? |
| 13:57.20 | ade|desk | Archer: why not just download it from debian or some such and put it in your sources/ |
| 13:57.53 | Archer | mesh seems to be the default here.. |
| 13:57.59 | Archer | a sec.. |
| 13:59.02 | *** join/#oe Snoogie (~Snoogie@gob75-5-82-231-180-13.fbx.proxad.net) |
| 14:01.40 | Archer | http://rafb.net/paste/results/41zkVf40.html |
| 14:03.37 | hrw|work | MACHINE = "tune-xscale" |
| 14:03.42 | hrw|work | nice one ;) |
| 14:04.46 | hrw|work | Archer: I see. |
| 14:05.24 | CIA-4 | 03zecke123 * r255 10bitbake/ (MANIFEST TODO lib/bb/data_dict.py): |
| 14:05.24 | CIA-4 | BitBake (minor update): |
| 14:05.24 | CIA-4 | <PROTECTED> |
| 14:05.24 | CIA-4 | <PROTECTED> |
| 14:05.24 | CIA-4 | <PROTECTED> |
| 14:05.48 | koen | rFF |
| 14:07.01 | Archer | hrw|work: it's a pretty bare arm board - at first i'd just be curious if th fbdev is recognized and it it loads anything |
| 14:07.45 | Archer | should i change it to something else? |
| 14:08.18 | hrw|work | grab http://heanet.dl.sourceforge.net/sourceforge/lex/flex-2.5.31.tar.bz2 and place in DL_DIR |
| 14:08.32 | hrw|work | I will push change in few minutes |
| 14:12.08 | *** join/#oe ibot (ibot@apt.bot.TimRiker.active.supporter.pdpc) |
| 14:12.08 | *** topic/#oe is OpenEmbedded Developer Lounge | http://bugs.openembedded.org/ (l/p guest/guest) | This is not a distribution support channel | The OE mailing list is back, but everyone needs to resubscribe. | We have a bitbake-dev mailing list for discussions on the core. If you're interested in BitBake-Ng, please subscribe. | LCA 2005 Embedded Miniconf - http://www.openembedded.org/miniconf |
| 14:13.25 | koen | lardman|work: ipkgfind.handhelds.org |
| 14:13.40 | koen | the sections are on your left |
| 14:15.38 | CIA-4 | 03koen 07 * r1.3538 10openembedded/ (4 files in 3 dirs): osso-af-startup_0.28-1.bb: remove -oknodo, courtesy Florian Boor |
| 14:17.02 | CIA-4 | 03hrw 07 * r1.3537.1.1 10openembedded/packages/flex/flex.inc: flex: changed SRC_URI back to SOURCEFORGE_MIRROR as mesh.dl.sf.net does not have file |
| 14:17.42 | hrw|work | Archer: with that change flex is fetchable |
| 14:18.32 | Archer | nice - should i run update bk://openembedded.bkbits.net/openembedded to get it? |
| 14:20.32 | koen | change the first openembedded into oe-devel |
| 14:20.44 | koen | or wait an hour till the repo's get synced :) |
| 14:21.22 | Archer | i'll go with the devel ver ;) |
| 14:23.59 | Archer | done - well, fingers crossed... |
| 14:34.57 | lardman|work | What's the flag to pass to make which means variables outside of the Makefile take priority? -s? |
| 14:35.05 | kergoth | -e |
| 14:35.10 | lardman|work | thx |
| 14:35.19 | kergoth | np |
| 14:36.58 | *** join/#oe ar_ (~ar@port-ip-213-211-231-98.reverse.mdcc-fun.de) |
| 14:39.57 | ade|desk | hrw|work: grr went away for a bit .. bloody well got gcc-cross-4.0.0-r1 being built .. oops |
| 14:49.58 | CosmicPenguin | people are never satisified |
| 14:51.04 | CoreDump|work | so true |
| 14:52.19 | ade|desk | hrw|work: ok 3.4.4 started now |
| 14:52.44 | hrw|work | cool |
| 14:52.58 | ade|desk | may take a while on this laptop |
| 14:53.11 | ade|desk | ( in a vmware session) |
| 14:53.37 | CosmicPenguin | pb_: When I get some breathing room, I'll merge in some of my x-compile hacks for xserver-xorg |
| 14:55.28 | CosmicPenguin | I was in the midst of xserver-xorg working (I had been using my own homebrew xorg for a while now) when I was distracted by other things |
| 14:57.03 | *** join/#oe marcan (1337@110.Red-83-53-0.pooles.rima-tde.net) |
| 14:58.01 | pb_ | CosmicPenguin: ah, cool. |
| 14:58.21 | pb_ | I patched up 6.8.99.10 well enough to make it work in my i686 -> i586 "cross", but I suspect there are still some bits that aren't right. |
| 14:59.00 | ade|desk | hrw|work: right i now have the same error, good start :) |
| 14:59.07 | pb_ | I know that some guy was having trouble compiling it on ARM the other day. I think that was because his compiler was choking on x86 assembler code in one of the drivers. |
| 14:59.41 | CosmicPenguin | heh |
| 15:00.02 | CosmicPenguin | Yeah, I'm not making that big a leap either - just x86_64 -> 486 |
| 15:00.30 | hrw|work | ade|desk: ;) |
| 15:09.58 | *** join/#oe tigrux (~tigrux@dsl-200-67-236-216.prod-empresarial.com.mx) |
| 15:11.35 | ade|desk | hrw|work: seen http://buildroot.uclibc.org/cgi-bin/viewcvs.cgi/trunk/buildroot/toolchain/gcc/3.4.4/602-sdk-libstdc%2B%2B-includes.patch?rev=10397&view=markup |
| 15:13.32 | hrw|work | ade|desk: it should help? |
| 15:14.03 | ade|desk | well i cant see the patch for this in oe ... maybe i am not looking correctly |
| 15:15.51 | *** join/#oe Crofton|laptop (~balister@h80ad9065.dhcp.vt.edu) |
| 15:16.16 | hrw|work | ade|desk: sdk-libstdc++-includes.patch in packages/gcc/gcc-3.4.4/ |
| 15:16.49 | hrw|work | ade|desk: but it is used only in 3.3.4 |
| 15:17.56 | ade|desk | sorry .. its just that it seems not to find the headers properly |
| 15:18.54 | hrw|work | maybe it should be added into gcc 3.4.4 also - I dont know |
| 15:20.11 | ade|desk | hrw|work: i need to travel home now... will take a better look tomorrow |
| 15:20.24 | hrw|work | ok |
| 15:20.25 | *** join/#oe marcan (1337@110.Red-83-53-0.pooles.rima-tde.net) |
| 15:20.30 | hrw|work | I will do test at home |
| 15:22.36 | *** join/#oe chouimat (~dieu@chouinard.developer.kde) |
| 15:25.02 | hrw|work | bye |
| 15:26.48 | *** join/#oe zap (~zap@217.170.93.9) |
| 15:55.03 | *** join/#oe ibot (ibot@apt.bot.TimRiker.active.supporter.pdpc) |
| 15:55.03 | *** topic/#oe is OpenEmbedded Developer Lounge | http://bugs.openembedded.org/ (l/p guest/guest) | This is not a distribution support channel | The OE mailing list is back, but everyone needs to resubscribe. | We have a bitbake-dev mailing list for discussions on the core. If you're interested in BitBake-Ng, please subscribe. | LCA 2005 Embedded Miniconf - http://www.openembedded.org/miniconf |
| 16:05.19 | *** join/#oe [g2] (~g2@g2.nslu2-linux) |
| 16:43.07 | *** join/#oe ibot (ibot@apt.bot.TimRiker.active.supporter.pdpc) |
| 16:43.07 | *** topic/#oe is OpenEmbedded Developer Lounge | http://bugs.openembedded.org/ (l/p guest/guest) | This is not a distribution support channel | The OE mailing list is back, but everyone needs to resubscribe. | We have a bitbake-dev mailing list for discussions on the core. If you're interested in BitBake-Ng, please subscribe. | LCA 2005 Embedded Miniconf - http://www.openembedded.org/miniconf |
| 16:44.40 | koen|tv | pb_: where can I find valid -mtune params for gcc? |
| 16:44.54 | koen|tv | I think I screwed up the arm926ejs one |
| 16:47.41 | CosmicPenguin | I think there's documentation in the code somehwere |
| 16:48.23 | koen|tv | I was hoping for online list, but source will do |
| 16:48.32 | pb_ | koen|tv: in the manual |
| 16:49.07 | pb_ | http://gcc.gnu.org/onlinedocs/gcc-4.0.0/gcc/ARM-Options.html#ARM-Options |
| 16:49.18 | koen|tv | thanks |
| 16:51.12 | koen|tv | aha |
| 16:51.26 | koen|tv | arm926ej-s instead of arm926ejs |
| 16:51.27 | jacques | mmmm, iwmmxt |
| 16:51.36 | jacques | I wonder if that does anything yet |
| 16:52.03 | koen|tv | iirc that doesn't work on hardfloat |
| 16:52.13 | pb_ | I think it just enables the wMMX intrinsics. |
| 16:53.32 | pb_ | afaik, gcc doesn't have any ability to vectorize code yet (though there is some work going on in that area for other platforms) |
| 16:56.02 | *** join/#oe [cc]smart (~smart@gw.ptr-62-65-149-158.customer.ch.netstream.com) |
| 16:58.24 | jacques | ah |
| 17:00.22 | CIA-4 | 03koen 07 * r1.3540 10openembedded/conf/machine/tune-arm926ejs.conf: tune-arm926ejs.conf: fix typo in mtune parameter |
| 17:01.36 | jacques | this reminds me of a crazy idea I had |
| 17:02.01 | jacques | what would be involved in booting an ipaq to linux in big-endian mode? |
| 17:03.40 | jacques | could it be as simple as a modified version of haret ? |
| 17:07.09 | *** join/#oe hue_ (~hue@219.136.132.144) |
| 17:07.30 | pb_ | well, the trouble is that all the I/O would be screwed up. |
| 17:08.11 | pb_ | other than that, yeah, you could just tweak haret to flip into big-endian mode before booting the kernel. |
| 17:10.02 | jacques | pb_, which I/O ? I figured I was missing something, but I don't quite understand |
| 17:10.39 | jacques | jacmet has successfully booted the nslu2 in LE mode |
| 17:11.19 | *** join/#oe hufnus (~slonsiki@mf53f36d0.tmodns.net) |
| 17:12.05 | pb_ | jacques: iirc, any peripherals that are less than 32 bits wide will be wired up wrongly. |
| 17:12.24 | jacques | ah ok, that sounds serious |
| 17:12.30 | pb_ | it's quite likely that the nslu2 just doesn't have any of those. |
| 17:12.48 | pb_ | you might get away with it on some ipaqs as well, but on the h5400 for example I think you would be in trouble with the graphics controller. |
| 17:13.05 | jacques | which ones can you think of off-hand for the ipaq ? (ok you already said graphics) |
| 17:13.33 | pb_ | sleeve, possibly. maybe the asics on some of them. |
| 17:14.01 | pb_ | I don't remember exactly what the impact is of endian switching, though, so I could well be wrong. I'd have to look it up. |
| 17:14.06 | jacques | hmm, sleeve would be bad - I was thinking about using the h5550 for this |
| 17:14.29 | jacques | essentially turn it into an nslu2 on steriods |
| 17:14.34 | jacques | steroids |
| 17:14.42 | pb_ | heh |
| 17:14.49 | jacques | but I'd need to be able to use my pcmcia ide adaptor |
| 17:15.03 | pb_ | I should break out my nslu2 again. I'd like to use it as a print server. |
| 17:15.13 | *** join/#oe darkschneider (~gab@213-140-6-96.fastres.net) |
| 17:15.18 | pb_ | I guess it shouldn't be too hard to make CUPS run on there. |
| 17:15.24 | jacques | really, all I'd need to work is serial, usb (usbnet), and pcmcia |
| 17:15.40 | pb_ | right |
| 17:15.49 | pb_ | well, you could give it a go. it'd be easy enough to make a hacked haret. |
| 17:16.00 | jacques | well, wifi would be nice too, but certainly not required |
| 17:18.30 | *** join/#oe ibot (ibot@apt.bot.TimRiker.active.supporter.pdpc) |
| 17:18.30 | *** topic/#oe is OpenEmbedded Developer Lounge | http://bugs.openembedded.org/ (l/p guest/guest) | This is not a distribution support channel | The OE mailing list is back, but everyone needs to resubscribe. | We have a bitbake-dev mailing list for discussions on the core. If you're interested in BitBake-Ng, please subscribe. | LCA 2005 Embedded Miniconf - http://www.openembedded.org/miniconf |
| 17:20.00 | *** join/#oe keturn (~kevint@c-24-21-141-200.hsd1.or.comcast.net) |
| 17:21.22 | *** join/#oe _alwin_ (alwin@cable-81-173-131-195.netcologne.de) |
| 17:25.47 | hrw | ere |
| 17:26.00 | *** join/#oe Snoogie (~Snoogie@gob75-5-82-231-180-13.fbx.proxad.net) |
| 17:28.11 | keturn | hi hrw |
| 17:28.17 | keturn | I'm using gcc 3.4.3 here |
| 17:28.39 | hrw | keturn: I had it failed |
| 17:38.35 | *** join/#oe zecke (~ich@83-169-170-199-dynip.superkabel.de) |
| 17:43.16 | hrw | hi zecke |
| 17:52.44 | lardman|work | bye |
| 17:54.36 | *** join/#oe treke|home (~ggilbert@68-66-243-62.ventca.adelphia.net) |
| 18:04.18 | *** join/#oe treke|home (~ggilbert@68-66-243-62.ventca.adelphia.net) |
| 18:21.56 | *** join/#oe synth (~cb@pcp838545pcs.venice01.fl.comcast.net) |
| 18:38.07 | *** join/#oe lefthandedframis (~scotsman@n128-227-99-152.xlate.ufl.edu) |
| 18:48.07 | Crofton | what argument do you use with oe_libinstall? |
| 18:48.19 | zecke | good question |
| 18:48.27 | Crofton | heh |
| 18:48.44 | Crofton | grep oe_libinstall */*bb |
| 18:49.01 | zecke | Crofton: that is what I do |
| 18:51.39 | *** join/#oe Virusmaster (~Thomas@p549CF069.dip.t-dialin.net) |
| 19:01.28 | Crofton | http://pastebin.ca/14667 |
| 19:01.44 | Crofton | Any thoughts on how to make oe_libinstall not barf like this? |
| 19:02.30 | CIA-4 | 03koen 07 * r1.3541 10openembedded/conf/distro/familiar-0.8.3.conf: familiar-0.8.3.conf: 0.9.0 -> 0.8.3, as keenly spotted by Erik Hovland |
| 19:03.02 | CosmicPenguin | Crofton: what oe_install command line did you use? |
| 19:04.07 | Crofton | e_libinstall -so host/lib/.libs/libusrp ${STAGING_LIBDIR} |
| 19:04.22 | Crofton | I really only want the shared lib .... |
| 19:04.35 | kergoth | you forgot -C before the path |
| 19:04.48 | kergoth | oe_libinstall -so -C host/lib/.libs libusrp ${STAGING_LIBDIR} |
| 19:04.54 | kergoth | err, -C host/lib that is |
| 19:05.05 | Crofton | what does -C do? |
| 19:05.13 | kergoth | specifies a path. |
| 19:05.20 | kergoth | without that, it looks in the current directory |
| 19:05.22 | Crofton | heh |
| 19:05.45 | Crofton | grep oe_libinstall */*.bb is not the best way to figure things out :) |
| 19:05.47 | Crofton | Thanks |
| 19:05.55 | kergoth | hm? |
| 19:06.03 | kergoth | all the examples use correct syntax. yours doesnt |
| 19:06.11 | kergoth | heh |
| 19:06.23 | kergoth | regardless, i'm pretty sure the syntax is covered in comments at hte beginning of hte script, in base.bbclass |
| 19:06.24 | Crofton | Well, I didn't understand the -C, so I left it out :) |
| 19:06.43 | *** join/#oe hrw|husky (~hrw@c36-51.icpnet.pl) |
| 19:06.49 | hrw|husky | hi |
| 19:07.36 | hrw|husky | qpe-gaim looks like working with irc. |
| 19:08.27 | *** part/#oe hrw|husky (~hrw@c36-51.icpnet.pl) |
| 19:13.10 | Crofton | Thanks guys, that did the trick |
| 19:13.24 | Crofton | Do we have anywhere on the wiki we can collect stuff like that? |
| 19:15.16 | kergoth | theres something of an oe users manual in the wiki |
| 19:15.18 | kergoth | belongs in that |
| 19:20.23 | *** join/#oe ar_ (~ar@port-ip-213-211-231-98.reverse.mdcc-fun.de) |
| 19:30.35 | *** join/#oe SirFred (~mteira@50.Red-81-32-62.pooles.rima-tde.net) |
| 19:30.38 | SirFred | Evening. |
| 19:31.30 | RP | evening SirFred |
| 19:32.09 | SirFred | RP: Hi. |
| 19:33.49 | *** join/#oe stealth (~stealth@user-0c6sdm3.cable.mindspring.com) |
| 19:34.10 | SirFred | RP: Did you had time to work in the quest for the holy w100 decoding? |
| 19:34.44 | RP | SirFred: No :-(. I've found another kernel bug I'm chasing :-( |
| 19:34.46 | SirFred | RP: I've found interesting things about the odd performance with the sysinfo gfx benchmark in opie. |
| 19:35.14 | RP | SirFred: What kind of interesting things? |
| 19:35.22 | jacques | RP, wow, how many have you fixed in the last two weeks? |
| 19:35.33 | SirFred | RP: I've copied that bench code to another program to perform text rendering, line drawing, rect filling, arc drawing and pixmap blitting but not in a combined way. |
| 19:35.54 | SirFred | RP: Well, the arc drawing is what is lowering the mean value for w100. |
| 19:36.19 | SirFred | RP: With the software driver, I'm getting 387 arcs/sec, with the hardware one, 57 arcs/sec |
| 19:36.43 | RP | SirFred: Right, that makes sense as it will be lots of small lines which have a lot of hardware setup costs |
| 19:36.54 | SirFred | RP: Line drawing gives 5128 lines/sec with the software driver and 7194 lines/sec with the hardware one. |
| 19:37.13 | RP | SirFred: We probably want to set a minimum line length below which we use the software rendering |
| 19:37.41 | SirFred | RP: Rect filling is 271 rects/sec in software against 533 rects/sec in hardware. Pixmap drawing is more or less the same, because the reference pixmap has transparent background and so, only software blitting can be made by now. |
| 19:38.10 | SirFred | RP: I'm suspecting that perhaps the problem is that AtiCore_DrawPoint is used while drawing arcs. |
| 19:38.16 | RP | Ok, at least that all makes sense |
| 19:38.32 | SirFred | RP: So, the performance is better, but with the arc drawing anomaly. |
| 19:38.48 | RP | SirFred: I think that will be related to the line length |
| 19:39.06 | stealth | why does my bitbake fail, what is quilt-native and what does it have to do with ppp? http://24.110.54.195/errors/bitbake-ppp.err |
| 19:39.13 | RP | SirFred: I'm also hopeful once we write a better engine for the core ati code, that will also boost performance |
| 19:39.19 | SirFred | RP: Humm, it's an arc, a circle arc. I suppose it must be rendered using points. |
| 19:40.11 | SirFred | RP: I didn't have time to look at it deeper, but I would bet my faith to it. |
| 19:40.47 | RP | SirFred: Try having it use software instead of hardware for line lengths less than say 4 pixels |
| 19:41.08 | koen|tv | stealth: quilt manages patches |
| 19:41.19 | koen|tv | stealth: and it failed to fetch according to your logs |
| 19:41.48 | SirFred | RP: I'll try. I'm making some changes in the qte driver to be able to enable/disable some accelerated opcodes using environment variables. |
| 19:42.00 | SirFred | RP: So it will be easy to compare results. |
| 19:42.13 | RP | SirFred: That sounds good |
| 19:42.29 | stealth | where can I find quilt? |
| 19:42.40 | koen|tv | stealth: check the src_uri |
| 19:42.54 | koen|tv | RP: iDCT would be a different beast, right? |
| 19:43.04 | stealth | yea I did, the url is broke |
| 19:44.10 | koen|tv | Crofton: I fixed a typo in tune-arm926.conf |
| 19:44.12 | RP | koen|tv: We need an example of its usage |
| 19:44.21 | koen|tv | Crofton: sorry if I broke it earlier |
| 19:44.41 | koen|tv | RP: the mplayer stuff is closed source? |
| 19:44.53 | stealth | acctually its not in src_uri |
| 19:44.56 | RP | koen|tv: That have iDCT code in mplayer? |
| 19:44.58 | Crofton | The copy I have seems OK now |
| 19:45.07 | Crofton | thansk for the warning |
| 19:45.14 | SirFred | As long as I know, mplayer is not using hardware iDCT. |
| 19:45.20 | SirFred | It's only using overlay. |
| 19:45.22 | koen|tv | damn |
| 19:45.39 | SirFred | I make some example usage for overlay, but I never got an stable image. |
| 19:45.47 | RP | that's what I thought as well... |
| 19:45.54 | SirFred | Perhaps changing fastsysclk value... |
| 19:46.03 | RP | SirFred: That would make a difference |
| 19:46.22 | SirFred | iDCT should be great. |
| 19:46.26 | SirFred | Dawn ATI |
| 19:46.47 | SirFred | We should demand them for selling as I think that we are not able to use. |
| 19:46.51 | zecke | stealth: quilt is a tool to apply patches |
| 19:46.56 | SirFred | s/as/us |
| 19:46.58 | zecke | stealth: OpenEmbedded use it to apply patches |
| 19:47.10 | zecke | stealth: you can not connect to savannah because you're firewalled |
| 19:48.02 | stealth | i connect but it says its not found |
| 19:48.13 | *** join/#oe ade|desk (~adavey@213-232-83-137.dsl.prodigynet.co.uk) |
| 19:48.57 | SirFred | My english is improving fast. :-P |
| 19:49.54 | RP | SirFred: indeed :) |
| 19:54.24 | zecke | stealth: that is not what the log says |
| 19:54.28 | *** join/#oe skopii (~john@c-67-167-215-228.hsd1.il.comcast.net) |
| 19:55.04 | stealth | I can read http://savannah.nongnu.org/download/quilt/ from my browser, can i just download a version and drop it in somehwhere? |
| 19:55.59 | RP | In case anyone cares, I can confirm 2.6.12-rc6-mm1 has a suspend/resume bug :-( |
| 19:56.05 | zecke | NOTE: fetch http://www.treke.net/oe/source/quilt_savannah.nongnu.org_VER_0_39_.tar.gz |
| 19:56.08 | zecke | NOTE: Fetch cvs://anoncvs:@savannah.nongnu.org/cvsroot/quilt;method=ext;rsh=ssh;module=quilt;tag=VER_0_39 |
| 19:56.15 | CosmicPenguin | RP: from the well-duh department... :) |
| 19:56.16 | zecke | 1) wrong tarball stash |
| 19:56.20 | zecke | 2) http != cvs |
| 19:56.28 | zecke | RP: damn |
| 19:57.25 | stealth | i know http != cvs, but im just saying I dont think my firewall is the problem |
| 19:57.54 | zecke | stealth: well then... |
| 20:08.41 | *** join/#oe aboeglin (~alex@213.154.79.4) |
| 20:08.44 | stealth | ...? |
| 20:10.16 | RP | quick question - how do I regenerate deploy/ipk/Packages ? |
| 20:10.42 | koen|tv | ipkg-make-index -p Packages -m . |
| 20:10.49 | koen|tv | or bitbake bootstrap-image |
| 20:14.09 | *** join/#oe reenoo (~r@p5489FF20.dip.t-dialin.net) |
| 20:14.33 | reenoo_ | evening |
| 20:16.24 | stealth | no matter what i try to build (bitbake nano) I get the quilt failure :( |
| 20:16.56 | zecke | stealth: no matter what I write, you know better |
| 20:17.08 | stealth | huh? |
| 20:17.23 | zecke | stealth: it fails to fetch quilt, quilt is essential for OpenEmbedded to apply patches |
| 20:17.35 | stealth | yea it fails, how can I fix it |
| 20:17.50 | zecke | stealth: look at what I wrote |
| 20:18.10 | stealth | you re wrote the error? |
| 20:18.48 | RP | koen: thanks |
| 20:19.24 | stealth | what file is specifying the cvs commands/url |
| 20:19.57 | zecke | stealth: your freaking firewalled, or behind a broken router (ECN)... |
| 20:20.05 | stealth | naa |
| 20:20.06 | zecke | stealth: and your tarball stash is wrong |
| 20:20.15 | zecke | stealth: but now I'm going to charge you |
| 20:20.19 | stealth | pff |
| 20:20.20 | zecke | stealth: you made me repeat... |
| 20:20.58 | koen | zecke: or he suffered the ssh timeout bug |
| 20:21.16 | RP | stealth: www.treke.net/oe/sources no longer exists. Update your local.conf - look at the sample one |
| 20:21.36 | koen | zecke: which can be fixed by doing 'ssh savannah.gnu.org' |
| 20:21.51 | zecke | don |
| 20:21.55 | RP | stealth: That is not your only problem as cvs doesn't seem able to check anything out |
| 20:21.56 | zecke | 't tell me |
| 20:22.13 | RP | stealth: so listen to what koen is saying ;-) |
| 20:22.15 | jacques | speaking of weird errors, anyone seen this while trying to build gnu-config-native ? |
| 20:22.18 | jacques | Replacing patch config-guess-uclibc.patch with new version |
| 20:22.18 | jacques | cp: cannot create regular file `patches/config-guess-uclibc.patch': Permission denied |
| 20:22.39 | zecke | jacques: what is the file permission on that file? |
| 20:24.47 | *** join/#oe ibot (ibot@apt.bot.TimRiker.active.supporter.pdpc) |
| 20:24.47 | *** topic/#oe is OpenEmbedded Developer Lounge | http://bugs.openembedded.org/ (l/p guest/guest) | This is not a distribution support channel | The OE mailing list is back, but everyone needs to resubscribe. | We have a bitbake-dev mailing list for discussions on the core. If you're interested in BitBake-Ng, please subscribe. | LCA 2005 Embedded Miniconf - http://www.openembedded.org/miniconf |
| 20:25.12 | jacques | zecke which dir? tmp/work/gnu-config-native-0.1cvs20050523-r3/ ? |
| 20:25.32 | zecke | jacques: no your complete build tree |
| 20:25.43 | zecke | jacques: as you deleted tmp it should be pretty 'empty' |
| 20:25.50 | stealth | what is the right url for cvs tarball stash? |
| 20:25.54 | stealth | I can cvs -z3 -d:ext:anoncvs@savannah.nongnu.org:/cvsroot/quilt co quilt manually, so its not my router |
| 20:26.04 | jacques | zecke about 300MB |
| 20:26.13 | RP | stealth: read what I said |
| 20:26.21 | jacques | well about 200MB |
| 20:26.41 | zecke | jacques: hmm, can you give me conf/* and the output of env? |
| 20:26.45 | jacques | 195817 cache |
| 20:26.45 | jacques | 1 deploy |
| 20:26.45 | jacques | 448 staging |
| 20:26.45 | jacques | 1 stamps |
| 20:26.45 | jacques | 2067 work |
| 20:27.18 | zecke | stealth: update your local.conf to a newer tarball stash |
| 20:27.29 | stealth | RP, the sample has treke.net also |
| 20:27.29 | zecke | stealth: and anyway your cvs is just timing out for whatever reason |
| 20:28.03 | RP | stealth: update your oe tree then |
| 20:28.25 | keturn | half an hour to parse. that is bad. Anyone have tips on generating a list of dependancies so I can make a shadow symlink OE collection like the wiki says OpenSLUG does? |
| 20:28.57 | jacques | zecke you just need my local.conf (only thing in conf/) and `env` ? what's your email address? :-) |
| 20:29.03 | zecke | keturn: I don't know what OpenSLIG does? |
| 20:29.07 | zecke | jacques: zecke@handhelds.org |
| 20:29.10 | jacques | ok |
| 20:30.18 | keturn | zecke: they've made a packages/ directory that has symlinks to only the packages it actually uses, so it doesn't parse the entire OE metadata collection. which makes sense if you know you're never going to use most of it. |
| 20:30.49 | koen | half an hour is a bit much |
| 20:30.54 | koen | 2 or 3 minutes here |
| 20:31.07 | kergoth | easier to just set your BBFILES appropriately |
| 20:31.08 | kergoth | heh |
| 20:31.27 | koen | BBMASK=* |
| 20:31.34 | RP | keturn: get someone to ls their stamps directory from a build simialr to the one you want to make - that will tell you which .bb files you need |
| 20:31.40 | jacques | keturn, what hardware are you trying to use? |
| 20:32.22 | keturn | ah, stamps. that'll work. |
| 20:32.33 | ade|desk | mask gpe-*|opie-* , should do it :) |
| 20:32.37 | koen | we have bug umber 100! |
| 20:32.50 | koen | ade|desk: qt* qp* |
| 20:32.59 | Crofton | hmmm is there a prize? |
| 20:33.18 | keturn | ade|desk: did that a long time ago. only results in masking a few hundred packages out of the thousands. |
| 20:35.36 | keturn | bitbake: why didn't you build my kernel, freak? |
| 20:37.48 | CoreDump|work | does anyone here know of a way to verify a user login password in a shell script? Are there any tools available for that? |
| 20:41.46 | jacques | zecke mail sent (I had to configure my mailer on that box) |
| 20:42.49 | keturn | build virtual/kernel does the right thing, and DEPENDS includes virtual/kernel... |
| 20:48.54 | RP | is if -z "${DEPLOY_KEEP_PACKAGES}"; then valid shell syntax? |
| 20:49.59 | RP | or should it have some [ ] in there ? |
| 20:50.58 | ade|desk | RP: i'd stick [] in there for non full bash |
| 20:51.10 | kergoth | that isnt valid. if [ -z "${DEPLOY_KEEP_PACKAGES}"; then or if test -z "${DEPLOY_KEEP_PACKAGES}"; then are valid |
| 20:52.30 | CIA-4 | 03zecke 07 * r1.3540.1.1 10openembedded/ (5 files in 3 dirs): |
| 20:52.30 | CIA-4 | Qt4 uic/moc: |
| 20:52.30 | CIA-4 | <PROTECTED> |
| 20:52.30 | CIA-4 | <PROTECTED> |
| 20:52.30 | CIA-4 | <PROTECTED> |
| 20:52.55 | RP | Right. schurig has broken rootfs_ipk.bbclass. I'll fix... |
| 20:59.30 | CIA-4 | 03RP 07 * r1.3544 10openembedded/ (2 files in 2 dirs): oprofile: update cvs version - some arm patches merged |
| 20:59.33 | CIA-4 | 03RP 07 * r1.3543 10openembedded/classes/rootfs_ipk.bbclass: rootfs_ipk: Make the shell script valid |
| 20:59.49 | koen | RP: does that fix bug #100? |
| 21:01.43 | RP | koen: yes |
| 21:01.45 | RP | same problem |
| 21:02.15 | koen | if only we could rig buzilla to do RESOLVED! FIXED! to the channel |
| 21:03.00 | RP | koen: I've marked it fixed |
| 21:03.40 | zecke | jacques: send me the gnuconfig directory as well |
| 21:03.56 | zecke | koen: it is a matter of understanding perl |
| 21:04.06 | koen | I gave up on that |
| 21:06.23 | jacques | zecke ok |
| 21:09.12 | jacques | zecke sent |
| 21:18.28 | CIA-4 | 03dirk 07 * r1.3541.1.1 10openembedded/ (3 files in 3 dirs): TOSA: update touchscreen. autoload touchscreen and sound modules on startup |
| 21:28.06 | CIA-4 | 03zecke 07 * r1.3542.1.1 10openembedded/packages/qmake/ (4 files in 2 dirs): |
| 21:28.06 | CIA-4 | qmake 2.00a update: |
| 21:28.06 | CIA-4 | <PROTECTED> |
| 21:28.06 | CIA-4 | <PROTECTED> |
| 21:28.22 | *** part/#oe pH5 (~ph5@e178219174.adsl.alicedsl.de) |
| 21:29.28 | zecke | jacques: I'll take a look later |
| 21:29.32 | zecke | now I'm going to bed |
| 21:29.54 | jacques | zecke ok it's been broken on that machine for about 5 months, one more night won't hurt :-) |
| 21:34.53 | *** join/#oe hanjo (~hanjo@pD95D010D.dip.t-dialin.net) |
| 21:43.50 | *** join/#oe mallum (~mallum@host81-153-48-235.range81-153.btcentralplus.com) |
| 21:44.33 | CIA-4 | 03reenoo 07 * r1.3516.35.1 10openembedded/packages/giac/giac_0.5.0.bb: giac: adjust SRC_URI to point to a versioned tarball. |
| 21:54.18 | *** join/#oe [g2] (~g2@g2.nslu2-linux) |
| 21:56.14 | *** join/#oe Twiun (~twiun@tangency.co.uk) |
| 22:00.31 | *** join/#oe Twiun (~twiun@tangency.co.uk) |
| 22:23.38 | *** join/#oe zw1 (~zwi@64.1.9.60) |
| 22:29.04 | jumpkick_ | CoreDump|work: use "expect" to script a login (i.e. SSH or FTP) with the login/pass.... That's how I'd tackle it... |
| 22:29.44 | jumpkick_ | CoreDump|home: ^-- |
| 22:31.46 | CoreDump|home | jumpkick_: thanks but that's a little bit overkill for a PDA :) |
| 22:35.07 | reenoo_ | I can only guess that this is about passwordless logins. but ssh keys should do the trick |
| 22:36.54 | CoreDump|home | reenoo_: actually I want to verify a users login password in a bash script. |
| 22:38.37 | reenoo_ | heh. just hash the pwd and compare the result with what's in /etc/passwd |
| 22:40.53 | CoreDump|home | nah, I'll just do my own passwords using md5 hashes |
| 23:06.29 | *** join/#oe Geo_KM (~keith@ppp59-183.lns1.cbr1.internode.on.net) |
| 23:19.06 | *** join/#oe Crofton|laptop (~balister@66-207-66-26.black.dmt.ntelos.net) |
| 23:34.57 | *** join/#oe CIA-8 (~CIA@flapjack.navi.cx) |