| 00:33.38 | *** join/#nslu2-linux RobNC (i=4157acf4@gateway/web/ajax/mibbit.com/x-e6c6fc3f08a5d659) |
| 00:35.40 | RobNC | rwhitby: slugimage finally did work for me - I got the updated version (but didn't need it with "-r Flashdisk:Flashdisk" parameters |
| 00:36.23 | rwhitby | excellent. so you're all up and running now? |
| 00:37.08 | RobNC | rwhitby: affirmative. Also updated apex for slugosbe. Not sure if it was needed but I used the one I built that specified 16mb in the filename (replaced it from build via slugosbe). |
| 00:37.36 | rwhitby | yes, you need the 16mb apex so it looks in the right place for the fis directory |
| 00:39.07 | RobNC | I used your newer redboot, updated with my MAC. I haven't installed any apps yet and haven't confirmed whole 16mb flash is detected by slugosbe. However, makes me wonder, part of the build process, there's a file called "slugosbe-4.10-alpha-nslu2-16mb.bin". From the filename, I would take that to mean it supports 16mb flash, so is apex 2nd stage replacement with apex "apex-slugos-nslu2-16mb-armeb-1.5.13.bin" necessar |
| 00:39.56 | RobNC | Specifically, does the apex that comes with slugosbe-4.10-alpha-nslu2-16mb.bin file already support 16mb flash? |
| 00:39.59 | rwhitby | no, it should have already built and put the 16mb apex into that image |
| 00:40.09 | rwhitby | so yes, it already supports it |
| 00:40.30 | rwhitby | (I flash that slugosbe-...-16mb.bin image all the time) |
| 00:40.31 | RobNC | ok, I did see a difference in file size between apex extracted via slugimage and the apex built in ~/kernel |
| 00:41.37 | RobNC | apex.bin - from slugimage = 48680, apex...16mb...1.5.13 is 48648 |
| 00:43.03 | RobNC | Both show version 1.5.13 (header - at position 0x7-0xd). |
| 00:47.14 | RobNC | Just curious why apex built into slugosbe is different than apex built stand-alone. Doing "xxd file.bin >file.hex" on both versions, there are a lot of differences between the two (at least 12*70 lines different via diff = about 11*70/2*8 bytes different) |
| 00:48.38 | RobNC | Thanks for your help with redboot. Once I confirm your redboot, attempt to reverse-port to older redboot (if possible), then post deltas on wiki and encourage more 16MB slugs. |
| 01:16.28 | RobNC | rwhitby: just confirmed, 256MB RAM and 16MB flash detected via apex/slugosbe. Cool... just wonder if same kernel bug (>64MB) is in this one as in the etch debian. |
| 01:56.48 | *** join/#nslu2-linux eiffel_ (n=eiffel@dslb-084-061-038-227.pools.arcor-ip.net) |
| 02:34.04 | *** join/#nslu2-linux osas (n=nnnnnnnn@nslu2-linux/osas) |
| 03:00.33 | *** join/#nslu2-linux x29a_ (n=x29a@unaffiliated/x29a) |
| 04:25.25 | *** join/#nslu2-linux Sinclair73de_ (n=Sinclair@p57B4B8B5.dip0.t-ipconnect.de) |
| 04:53.24 | *** join/#nslu2-linux RobNC (i=4157acf4@gateway/web/ajax/mibbit.com/x-c60ebf5f1f70b44f) |
| 06:02.39 | *** join/#nslu2-linux drath_ (i=vmaster@p5B07E62E.dip.t-dialin.net) |
| 06:09.44 | *** join/#nslu2-linux treitmay1 (n=treitmay@85-127-16-167.dynamic.xdsl-line.inode.at) |
| 06:54.05 | *** join/#nslu2-linux Reedy (n=Reedy@wikimedia/Reedy) |
| 06:55.10 | *** join/#nslu2-linux Reedy (n=Reedy@wikimedia/Reedy) |
| 07:09.21 | *** join/#nslu2-linux osmeest (n=olivier@d83-186-152-101.cust.tele2.be) |
| 07:14.01 | *** join/#nslu2-linux DrZimmerman (n=theo@77-56-246-76.dclient.hispeed.ch) |
| 09:12.37 | j24 | rwhitby: hi |
| 09:37.19 | *** join/#nslu2-linux erikja (n=erikja@0x57314066.abnxx10.adsl-dhcp.tele.dk) |
| 10:40.03 | *** join/#nslu2-linux osmeest (n=olivier@d83-186-152-101.cust.tele2.be) |
| 11:06.22 | *** join/#nslu2-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 11:09.11 | osmeest | booting debian with a 2.6.24 kernel on NAS100d, my USB is dead |
| 11:09.31 | osmeest | one of the host controller complains about PCI error and disables itself |
| 11:09.54 | osmeest | as a result, only bus 1 (which I guess is internal) is there |
| 11:10.21 | osmeest | does someone have seen this ? or better resolved this issue ? |
| 11:10.48 | osmeest | could this be related to the dma_free_coherent warning I see in syslog ? |
| 11:12.04 | treitmayr | osmeest: is there anything connected to that USB port? |
| 11:12.13 | osmeest | yes |
| 11:12.21 | osmeest | an HP AiO printer |
| 11:12.38 | treitmayr | hmm |
| 11:13.04 | treitmayr | if you disconnect it do you also get the PCI error? |
| 11:13.15 | osmeest | that's one of my goals with the NAS is to have it as a printer server |
| 11:13.49 | treitmayr | sure, but just to see if the error might be caused by the printer being connected... |
| 11:15.10 | osmeest | looking through the kern.log, yes, it does that without anything connected to it |
| 11:15.39 | osmeest | in fact I booted it without the printer, then connected it (hoping to see the detection) but nothing happened |
| 11:17.05 | treitmayr | ok, that's interesting. Unfortunately I just know the NSLU2 where I though I had similar problems like you, but that's probably not the case then... |
| 11:18.26 | osmeest | uhci_hcd 0000:00:03.1: host system error, PCI problems? |
| 11:18.26 | osmeest | host controller halted, very bad! |
| 11:18.26 | osmeest | HC died; cleaning up |
| 11:19.04 | osmeest | uhci_hcd 0000:00:03.0: host system error, PCI problems? |
| 11:19.04 | osmeest | uhci_hcd 0000:00:03.0: host controller halted, very bad! |
| 11:19.19 | osmeest | uhci_hcd 0000:00:03.0: HC died; cleaning up |
| 11:22.28 | treitmayr | did it work with an older kernel version? |
| 11:22.57 | osmeest | I don't know... |
| 11:23.09 | treitmayr | ah, ok |
| 11:23.42 | osmeest | with 2.6.18, the hard disk (pata_artop) does not exist |
| 11:24.00 | osmeest | so I don't have hard disk access (bad for Debian) |
| 11:25.57 | rwhitby | RobNC: the >64MB kernel bug is independent of the distribution - it appears in all nslu2 firmware |
| 11:27.53 | rwhitby | osmeest: I doubt anyone other than you has tested 2.6.24 on nas100d |
| 11:29.12 | osmeest | rwhitby: well, it's barely unusable |
| 11:29.36 | osmeest | rwhitby: DMA problems are pausing the system every now and then |
| 11:30.00 | osmeest | rwhitby: my ssh session appears like dead then revives automagically |
| 11:30.14 | osmeest | in 2.6.18, the HDD is using aec62xx ? |
| 11:30.31 | osmeest | (that's what I saw in the bootlog of the original firmware) |
| 11:30.34 | rwhitby | does the same thing occur with the slugos/be 2.6.24 kernel and distro? |
| 11:30.50 | osmeest | I don't think so but can't say for sure... |
| 11:31.09 | *** join/#nslu2-linux GPSFan (n=kenm@12.10.255.246) |
| 11:31.10 | osmeest | I'll make a try after lunch (it 1:30PM here in Belgium) |
| 11:31.44 | osmeest | rwhitby: which kernel would you advise me then ? the 2.6.18 from edgy ? or something else ? |
| 11:31.47 | rwhitby | I've tested kernel boot for 2.6.24 on nas100d, but my development nas100d doesn't have a hard disk attached, so I have no idea whether the disk controller works |
| 11:31.57 | rwhitby | my other nas100d in production runs Debian etch |
| 11:34.47 | osmeest | what I can say for sure is that I could debootstrap etch from SlugOS 4.8 without apparent problems |
| 11:35.52 | osmeest | (note that I used slugos/LE, not BE) |
| 11:36.06 | osmeest | can this have a bad influence ? |
| 11:41.06 | rwhitby | no |
| 11:41.39 | rwhitby | the kernels should be quite similar between slugos and debian - we share much the same patches |
| 12:18.01 | osmeest | OK... trying slugos/le in a minute then |
| 12:25.05 | osmeest | slugos uses 2.6.21 (I thought it was already at 2.6.24) |
| 12:25.28 | osmeest | and there is no error on USB |
| 12:28.38 | rwhitby | slugos builds from latest monotone repository use 2.6.24.4 |
| 12:28.51 | osmeest | I'm using 4.8 beta |
| 12:28.55 | rwhitby | (it's at 4.10-alpha at the moment) |
| 12:29.01 | rwhitby | 4.8-beta used 2.6.21, yes. |
| 12:29.49 | osmeest | DMA seems stable (yesterday it complained a lot while doing an fsck on the 200GB partition, I try with slugos and it doesn't complain at all) |
| 12:32.47 | osmeest | can I use 2.6.22 from lenny in etch ? |
| 12:36.35 | rwhitby | I have no idea. Best to ask that in #debian-arm on OFTC.net |
| 12:37.14 | osmeest | which module do you use in etch ? I can't find aec62xx.ko in lib/modules |
| 12:38.08 | rwhitby | I'll have to check |
| 12:40.28 | rwhitby | 2.6.21-2-ixp4xx |
| 12:40.32 | rwhitby | pata_artop |
| 12:40.47 | rwhitby | Debian GNU/Linux 4.0 |
| 12:40.58 | osmeest | where did you get that kernel ? |
| 12:41.12 | osmeest | that's the same as from slug os but it's not on debian repos |
| 12:41.35 | rwhitby | I may well have built it myself. |
| 12:41.56 | rwhitby | I can put it somewhere if you want it |
| 12:42.09 | osmeest | could be useful :) |
| 12:42.29 | osmeest | that's probably why in the bootstrap page you were talking about the buildhost to copy the kernel from |
| 12:43.14 | rwhitby | which page? |
| 12:43.38 | osmeest | Debian/Bootstrap |
| 12:43.53 | osmeest | near the end, you mention that a recent kernel should be installed |
| 12:43.59 | osmeest | and you scp it from buildhost |
| 12:44.37 | osmeest | the aec62xx driver from 2.6.18 is nowhere to be found in debian it seems |
| 12:45.36 | rwhitby | right - the whole pata/sata subsystem had a major change between 2.6.18 and 2.6.21 |
| 12:46.51 | osmeest | yep... all related to libata (in the new form) and all hdds becoming sdX instead of hdX |
| 12:47.12 | rwhitby | yep |
| 12:48.59 | osmeest | the fsck from slugos went without a hitch |
| 12:49.28 | osmeest | and usb is working |
| 12:49.51 | osmeest | I'll try the 2.6.22 from lenny (cannot break anything anyway) |
| 12:49.51 | rwhitby | osmeest: 91f245a39fd7e999b46b4c7365835c09 linux-image-2.6.21-2-ixp4xx_2.6.21-6_arm.deb |
| 12:50.18 | rwhitby | osmeest: let me know when you've got it so I can delete it from the temp location I /msg'd you |
| 12:51.31 | osmeest | if that kernel is mandatory for NAS100d (if not for other platforms), could be useful to drop in a public area that I can link to from the wiki page |
| 12:52.25 | rwhitby | can't do that. I don't have the source readily available any more. |
| 12:52.52 | osmeest | hmm... kind of a dead end there... |
| 12:53.17 | osmeest | without this kernel, no one can really install debian on the nas then |
| 12:53.51 | rwhitby | the latest slugos kernel, plus bootstrap, doesn't work? |
| 12:54.20 | osmeest | probably not because it's in the debian side that there is something missing |
| 12:54.39 | rwhitby | how could it be something outside the kernel? |
| 12:54.40 | osmeest | for some reason, aec62xx has been removed from debian kernels in 2.6.18 |
| 12:54.56 | rwhitby | it was probably never there |
| 12:55.05 | rwhitby | nas100d has never been officially supported |
| 12:55.30 | osmeest | pityfully |
| 12:55.33 | rwhitby | if 2.6.18 worked, I wouldn't have had to build my own 2.6.21 kernel |
| 12:55.49 | rwhitby | "pityfully"? what does that mean? |
| 12:56.17 | rwhitby | it sounds a bit ungrateful ... |
| 12:57.09 | osmeest | probably my bad english: I mean it's a pity that NAS100d is not supported officially |
| 12:57.22 | rwhitby | (nas100d has never been officially supported by debian. it's supported by nslu2-linux for slugos) |
| 12:58.06 | rwhitby | the only reason why it's not supported officially is cause there is probably less than 5 people in the world trying to run debian on a nas100d. |
| 12:58.19 | osmeest | I suppose this is not going to change as NAS100d is out of market |
| 12:58.30 | rwhitby | not unless you change it :-) |
| 12:58.49 | rwhitby | I won't be upgrading my nas100d any time soon - all it does is act as a bluetooth gateway. |
| 12:59.14 | rwhitby | If I reinstalled it, I'd put openwrt on it instead. |
| 12:59.40 | osmeest | it's supported on the nas ? |
| 13:00.48 | rwhitby | there is a configuration for it, and i've booted it on a nas100d without a hard disk. |
| 13:03.09 | rwhitby | osmeest: BTW, I would have built that debian kernel using the nslu2-linux debian svn repository. |
| 13:03.22 | rwhitby | http://svn.nslu2-linux.org/svnroot/debian/trunk/ |
| 13:03.43 | rwhitby | what I can't guarantee is that it would still build from that today. |
| 13:04.04 | rwhitby | that's why I can't put the binary anywhere public - it would be a gpl violation. |
| 13:05.33 | osmeest | I see |
| 13:07.34 | rwhitby | I never build anything manually - it's always built from a makefile in a public repo. |
| 13:08.02 | rwhitby | so there's a good chance it would work if you can replicate the environment I had when I built it (which was probably debian etch or testing at that time) |
| 13:09.25 | osmeest | where did your cross tool chain come from ? slugos-image build ? or some packaged tool chain ? |
| 13:09.43 | rwhitby | http://svn.nslu2-linux.org/svnroot/debian/trunk/toolchain/ |
| 13:10.12 | rwhitby | everything is in the Makefiles |
| 13:10.31 | osmeest | cool :) |
| 13:11.49 | osmeest | you just need to remember which repo, which makefile :) |
| 13:12.37 | osmeest | about flash-kernel, I've seen that there are new versions in the pipeline (1.7 and 1.8 with 2 new platforms supported) |
| 13:12.50 | rwhitby | osas: http://trac.nslu2-linux.org/ is the place to start |
| 13:12.54 | rwhitby | (for which repo) |
| 13:13.05 | osmeest | adding the NAS would not be too complicated |
| 13:13.57 | osmeest | but the other platform do not seem to rely on a secondary bootloader (it adds some prefix to the kernel - I suppose for the endianness - or is it for sercomm ?) |
| 13:14.21 | rwhitby | osmeest: nas100d has crc enabled in redboot - which makes it a bit harder to flash partitions from userspace |
| 13:14.39 | rwhitby | prefix is for endianness and machine id |
| 13:15.13 | osmeest | the nas is really different from the others then :-/ |
| 13:15.22 | rwhitby | Look in http://svn.nslu2-linux.org/svnroot/kernel/trunk/Makefile to see the prefixes. |
| 13:15.43 | rwhitby | Not that different - if you flash the kernel and rootfs from the redboot console there is no problem. |
| 13:16.03 | osmeest | indeed (that's what I've done until now) |
| 13:16.36 | osmeest | ah... I've a BUG in dma_free_coherent with slugos as well |
| 13:16.43 | osmeest | was just longer to come |
| 13:39.11 | *** join/#nslu2-linux Kowalczyk (n=kowalczy@117.80-202-134.nextgentel.com) |
| 13:39.22 | osmeest | with your 2.6.21 kernel, everything is OK (USB works fine and HDD seems OK as well) |
| 13:40.13 | rwhitby | problem solved :-) |
| 13:47.31 | osmeest | yep, thx a lot |
| 13:47.44 | osmeest | I'll try to rebuild the kernel from the repo |
| 13:48.01 | osmeest | if it works, I'll update the wiki page about it |
| 14:10.17 | *** join/#nslu2-linux Ragnor (n=Ragnor@dslb-084-060-152-030.pools.arcor-ip.net) |
| 14:29.44 | *** join/#nslu2-linux Lunchbox2 (n=NSLU2-IR@ip68-12-56-136.tu.ok.cox.net) |
| 14:30.13 | Lunchbox2 | anyone available to try and help me troubleshoot a problem? |
| 14:33.20 | rwhitby | Is the problem "world peace" ? |
| 14:33.32 | rwhitby | (or the lack thereof) |
| 14:34.21 | rwhitby | (In IRC, it's customary to just state the problem first, rather than asking if there is anyone here to help you on a problem that they don't know the details about yet) |
| 14:34.48 | Lunchbox2 | I figure if we can knock this one out I can fix world peace on sunday - first I want my data back |
| 14:36.10 | Lunchbox2 | My harddive is no longer be recognized as formated. I'm running V2.3R63-uNSLUng-6.8-beta with a drive only on the disk2 port. |
| 14:36.32 | rwhitby | Ah, did you post this to the mailing list today? |
| 14:36.39 | Lunchbox2 | yep |
| 14:36.46 | rwhitby | My condolences. |
| 14:37.03 | rwhitby | But seriously, does your Linux box not see anything in /proc/partitions when you plug in the drive? |
| 14:39.37 | *** join/#nslu2-linux NSLU2-IRC (n=NSLU2-IR@ip68-12-56-136.tu.ok.cox.net) |
| 14:39.43 | lunchbox2 | doh |
| 14:40.18 | rwhitby | Does your Linux box not see anything in /proc/partitions when you plug in the drive? |
| 14:41.00 | lunchbox2 | First caveat is I'm not a real strong linux user. I installed the drive into my box yesterday and restarted ubuntu. The drive didn't show up at all. I'm wondering if I need to manually mount it. I tried attaching it with just a USB cable and physically installing it in my PC. |
| 14:42.13 | rwhitby | when you say "didn't show up" do you mean on the GUI, or didn't show up in dmesg or /proc/partitions? |
| 14:42.21 | lunchbox2 | I was somewhat hopeful last night when I ran across this "http://www.nslu2-linux.org/wiki/HowTo/TroubleshootADriveNotFormattedCondition" |
| 14:42.35 | lunchbox2 | Didn't show up on the GUI |
| 14:43.31 | rwhitby | try it again, and see if it appears in dmesg output or in 'cat /proc/partitions' |
| 14:43.59 | rwhitby | if it does, you have some hope. if it doesn't then you start to be seriously concerned. |
| 14:44.26 | rwhitby | if it does show up, then immediate dd it to another drive or to a file on a bigger partition |
| 14:45.04 | lunchbox2 | are you going to be around for a while? I've never used dmesg or cat /proc/partitions |
| 14:45.14 | lunchbox2 | I'm a serious newbie at this stuff |
| 14:45.39 | rwhitby | It's after midnight here, but anyone else here should be able to help you with dmesg and /proc/partitions |
| 14:46.01 | osmeest | lunchbox2: plug in your drive |
| 14:46.11 | osmeest | then type dmesg | tail -20 |
| 14:46.27 | osmeest | you should see some text indicating that a new device has been inserted |
| 14:47.05 | lunchbox2 | would you recommend I first try just using the USB cable or go just put it in the box to start with |
| 14:47.42 | rwhitby | put it in the box directly |
| 14:47.48 | rwhitby | less to go wrong |
| 14:47.52 | lunchbox2 | k |
| 14:48.21 | lunchbox2 | I have a little work to do then - I shall return....with questions I'm sure. Thanks guys. Heres to hoping the data gods are feeling generous |
| 14:48.54 | lunchbox2 | BBIAB |
| 15:36.31 | *** join/#nslu2-linux lunchbox2 (n=chatzill@ip68-12-56-136.tu.ok.cox.net) |
| 15:37.04 | lunchbox2 | still around osmeest? |
| 15:39.35 | osmeest | yep |
| 15:39.55 | osmeest | to recap, you try to access a USB HDD on your PC, right ? |
| 15:40.08 | osmeest | or is it on an NSLU that you try ? |
| 15:40.26 | lunchbox2 | yep - installed the drive to my pc and am trying to recover the data directly |
| 15:40.47 | osmeest | and your PC is running Ubuntu, right ? |
| 15:40.50 | lunchbox2 | so this is messed up - i'm not seeing it in the dmesg - or I don't know what I should be looking at |
| 15:40.52 | lunchbox2 | correct |
| 15:41.02 | lunchbox2 | but it shows up in GParted as an unallocated drive |
| 15:41.25 | osmeest | can you send the last 10 lines of dmesg ? |
| 15:41.31 | osmeest | dmesg | tail -10 |
| 15:42.18 | lunchbox2 | [ 1403.486315] ide: failed opcode was: unknown |
| 15:42.19 | lunchbox2 | [ 1403.486340] hdd: drive not ready for command |
| 15:42.21 | lunchbox2 | [ 1403.534179] ide1: reset: success |
| 15:42.22 | lunchbox2 | [ 1403.534212] hdd: status error: status=0x00 { } |
| 15:42.24 | lunchbox2 | [ 1403.534214] ide: failed opcode was: unknown |
| 15:42.25 | lunchbox2 | [ 1403.534219] end_request: I/O error, dev hdd, sector 0 |
| 15:42.27 | lunchbox2 | [ 1403.534232] hdd: drive not ready for command |
| 15:42.28 | lunchbox2 | [ 1403.534806] hdd: status error: status=0x00 { } |
| 15:42.30 | lunchbox2 | [ 1403.534808] ide: failed opcode was: 0xea |
| 15:42.31 | lunchbox2 | [ 1403.534819] hdd: drive not ready for command |
| 15:44.09 | osmeest | you took the HDD out of a HDD USB box and plugged it straight in the IDE controller ? |
| 15:44.22 | lunchbox2 | yes |
| 15:44.41 | osmeest | are you sure your cabling is OK ? |
| 15:44.52 | osmeest | in particular, check master/slave jumpers |
| 15:45.01 | lunchbox2 | I did change it from a master to a slave |
| 15:45.52 | lunchbox2 | its on the same IDE cable as the ubuntu drive which is a master |
| 15:45.57 | *** join/#nslu2-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 15:48.15 | osmeest | why didn't you leave the HDD in its uSB box ? |
| 15:50.04 | lunchbox2 | before I left if I should put it in the box or leave it in the USB form - rwhitby recommended I put it in the box and save myself trouble - I can put it back in if thats going to be easier |
| 15:50.24 | lunchbox2 | I'll light myself on fire if it means I get the data back |
| 15:50.48 | osmeest | I can't promise anything :) |
| 15:51.07 | osmeest | but putting it in the USB box should avoid all the IDE cabling problems |
| 15:51.32 | lunchbox2 | ok - i'll do that - I'll be back in a few :) don't go anywhere please! hehe |
| 15:51.51 | osmeest | I'll do my best but be short :) |
| 16:00.28 | *** join/#nslu2-linux lunchbox2 (n=chatzill@ip68-12-56-136.tu.ok.cox.net) |
| 16:00.55 | lunchbox2 | [ 74.674146] cx2388x v4l2 driver version 0.0.6 loaded |
| 16:00.57 | lunchbox2 | [ 74.688379] lirc_i2c: chip 0x10020 found @ 0x71 (Hauppauge PVR150) |
| 16:00.58 | lunchbox2 | [ 74.688551] lirc_dev: lirc_register_plugin: sample_rate: 10 |
| 16:01.00 | lunchbox2 | [ 95.338389] NET: Registered protocol family 17 |
| 16:01.01 | lunchbox2 | [ 119.127251] zd1211rw 2-3:1.0: error ioread32(CR_REG1): -11 |
| 16:01.03 | lunchbox2 | [ 119.142480] ADDRCONF(NETDEV_UP): eth1: link is not ready |
| 16:01.05 | lunchbox2 | [ 119.894317] ieee80211_crypt: registered algorithm 'WEP' |
| 16:01.06 | lunchbox2 | [ 119.944603] SoftMAC: Open Authentication completed with 00:0f:66:c2:e0:96 |
| 16:01.07 | lunchbox2 | [ 120.092230] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready |
| 16:01.09 | lunchbox2 | [ 126.203308] eth1: no IPv6 routers prese |
| 16:03.03 | osmeest | hmmm nothong about usb... |
| 16:03.11 | osmeest | that's not good |
| 16:03.20 | lunchbox2 | :( |
| 16:04.08 | osmeest | I can't say more from here |
| 16:04.49 | lunchbox2 | thats.......... bad :( |
| 16:05.42 | lunchbox2 | [ 253.251024] end_request: I/O error, dev fd0, sector 0 |
| 16:05.44 | lunchbox2 | [ 253.251030] Buffer I/O error on device fd0, logical block 0 |
| 16:05.45 | lunchbox2 | [ 258.783853] end_request: I/O error, dev fd0, sector 0 |
| 16:05.47 | lunchbox2 | [ 258.783859] Buffer I/O error on device fd0, logical block 0 |
| 16:05.48 | lunchbox2 | [ 264.316303] end_request: I/O error, dev fd0, sector 0 |
| 16:05.50 | lunchbox2 | [ 264.316309] Buffer I/O error on device fd0, logical block 0 |
| 16:05.51 | lunchbox2 | [ 269.863653] end_request: I/O error, dev fd0, sector 0 |
| 16:05.53 | lunchbox2 | [ 269.863659] Buffer I/O error on device fd0, logical block 0 |
| 16:05.54 | lunchbox2 | [ 275.418008] end_request: I/O error, dev fd0, sector 0 |
| 16:05.56 | lunchbox2 | [ 275.418014] Buffer I/O error on device fd0, logical block 0 |
| 16:06.35 | osmeest | fd0 is floppy, nothing to do with the hdd |
| 16:06.57 | osmeest | try dmesg | less |
| 16:07.16 | osmeest | go to the end, go backward looking for usb stuff |
| 16:08.21 | lunchbox2 | will it be labeled as USB or have another designation like fd0 |
| 16:09.05 | osmeest | you should see usb stuff and then sd? (? = letter) when it has found partitions on it |
| 16:09.55 | lunchbox2 | I can tell you that it's device /dev/sbd - its being recognized in Gparted as unallocated with no paritions |
| 16:10.33 | osmeest | dev/sdb |
| 16:12.02 | lunchbox2 | oops hold on - i hadn't hit return after that last command so it didn't scroll through everything |
| 16:12.05 | lunchbox2 | [ 46.036268] usb-storage: device scan complete |
| 16:12.07 | lunchbox2 | [ 46.037393] scsi 4:0:0:0: Direct-Access WDC WD12 00JB-22GVA0 PQ: 0 ANSI: 0 |
| 16:12.08 | lunchbox2 | [ 46.039493] sd 4:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB) |
| 16:12.10 | lunchbox2 | [ 46.042115] sd 4:0:0:0: [sdb] Write Protect is off |
| 16:12.11 | lunchbox2 | [ 46.042117] sd 4:0:0:0: [sdb] Mode Sense: 33 00 00 00 |
| 16:12.13 | lunchbox2 | [ 46.042119] sd 4:0:0:0: [sdb] Assuming drive cache: write through |
| 16:12.14 | lunchbox2 | [ 46.044238] sd 4:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB) |
| 16:12.16 | lunchbox2 | [ 46.047111] sd 4:0:0:0: [sdb] Write Protect is off |
| 16:12.17 | lunchbox2 | [ 46.047114] sd 4:0:0:0: [sdb] Mode Sense: 33 00 00 00 |
| 16:12.19 | lunchbox2 | [ 46.047115] sd 4:0:0:0: [sdb] Assuming drive cache: write through |
| 16:12.20 | lunchbox2 | [ 46.047119] sdb: unknown partition table |
| 16:12.59 | osmeest | the last one cofirms what you saw in gparted |
| 16:13.23 | osmeest | was the drive shocked while running ? |
| 16:14.05 | osmeest | was the drive formatted on an nslu ? |
| 16:14.05 | lunchbox2 | "No such file or directory" - it's possible we had a storm come through a few days ago and the power flickered - it's plugged into a surge protector |
| 16:14.17 | lunchbox2 | correct - it's been on there for like 3 yrs |
| 16:15.01 | osmeest | i don't know if the partition table is pc compatible on the nslu |
| 16:17.17 | *** join/#nslu2-linux copperbeech (n=copperbe@82-43-164-88.cable.ubr04.nmal.blueyonder.co.uk) |
| 16:19.21 | copperbeech | quick question - just upgraded from NSLU2 to ND Pro - only to find there is no libstdc++ or vtun kernel module ... so back on IRC - just wanted to know why the optware SXXoptware script references an rc.optware file in /opt/etc where none exists. Also the /opt/etc/init.d scripts dont seem to be run on reboot - am I missing somehting? |
| 16:20.48 | copperbeech | Is rwhitby still the lead maintainer for optware these days? |
| 16:21.51 | CIA-45 | 03bzhou * r8296 10optware/trunk/make/calc.mk: calc: 2.12.3.0 -> 2.12.3.3 |
| 16:23.25 | eno | copperbeech: i'm optware feed manager, but i don't have a nd-pro |
| 16:23.29 | lunchbox2 | Hum... |
| 16:23.45 | eno | which feed is ND Pro using? |
| 16:26.04 | eno | ah ok, ND Pro is using optware/vt4 feed |
| 16:26.24 | eno | IIRC, vt4 toolchain sucks, no libstdc++ |
| 16:27.01 | eno | http://www.openfsg.com/forum/viewtopic.php?f=18&t=5789 |
| 17:59.53 | *** join/#nslu2-linux hillct (n=H@cpe-024-211-242-232.nc.res.rr.com) |
| 18:01.50 | *** join/#nslu2-linux hillct_ (n=hillct@cpe-024-211-242-232.nc.res.rr.com) |
| 18:07.59 | CIA-45 | 03bzhou * r8297 10optware/trunk/make/ (libtorrent.mk rtorrent.mk): libtorrent: 0.12.1 -> 0.12.2; rtorrent: 0.8.1 -> 0.8.2 |
| 18:11.47 | *** part/#nslu2-linux hillct (n=H@cpe-024-211-242-232.nc.res.rr.com) |
| 18:16.46 | *** join/#nslu2-linux hillct (n=hillct@cpe-024-211-242-232.nc.res.rr.com) |
| 18:37.40 | *** join/#nslu2-linux [cc]smart (n=[cc]smar@gw.ptr-80-238-209-140.customer.ch.netstream.com) |
| 18:53.58 | *** part/#nslu2-linux hillct (n=hillct@cpe-024-211-242-232.nc.res.rr.com) |
| 18:56.17 | *** join/#nslu2-linux hillct (n=hillct@cpe-024-211-242-232.nc.res.rr.com) |
| 19:07.08 | *** join/#nslu2-linux x29a (n=x29a@unaffiliated/x29a) |
| 21:32.09 | *** join/#nslu2-linux axm (n=axm@f054100001.adsl.alicedsl.de) |
| 21:32.48 | axm | hi, anybody using transmission? |
| 21:50.59 | *** join/#nslu2-linux axm (n=axm@f054100001.adsl.alicedsl.de) |
| 21:51.28 | *** part/#nslu2-linux axm (n=axm@f054100001.adsl.alicedsl.de) |
| 23:16.40 | *** join/#nslu2-linux HardDisk_WP (n=Marco@wikipedia/harddisk) |