| 00:28.42 | *** join/#nslu2-linux ecopperbech (n=copperbe@77-96-79-35.cable.ubr04.nmal.blueyonder.co.uk) |
| 00:29.07 | *** join/#nslu2-linux kfm82lin1s (n=kfm82@p54BEF87E.dip.t-dialin.net) |
| 01:20.22 | *** join/#nslu2-linux jacques (n=jacques@nslu2-linux/jacques) |
| 01:25.22 | CIA-8 | 03bzhou * r6876 10optware/trunk/ (make/samba.mk sources/samba/configure.in-wl500g.patch): samba: 3.0.25c -> 3.0.26a |
| 01:26.29 | osas | eno: ping |
| 01:27.04 | osas | I'm using optware on ddwrt |
| 01:27.21 | osas | while trying to use ngrep, I got the following error: |
| 01:27.35 | osas | pcap compile: ip6 not supported |
| 01:28.23 | osas | I noticed that the 'IPV6=no' option is used only for the gumstix toolchain |
| 01:28.58 | osas | I wonder if the same option should be added to the ddwrt toolchain |
| 01:30.38 | eno | osas: makes perfect sense |
| 01:31.07 | eno | gumstix will have build problem |
| 01:31.16 | eno | with ipv6 |
| 01:31.33 | osas | this option woult afect the toolchain also or just the optware packages from the feed? |
| 01:31.58 | osas | I'm building now the ngre package with the new option |
| 01:32.13 | eno | is it possible to have ddwrt support ipv6? |
| 01:32.22 | eno | since the toolchain seems to support ipv6 |
| 01:32.37 | osas | I'm running the latest stable dd-wrt |
| 01:32.40 | eno | this option only affects optware packages |
| 01:32.42 | osas | and the support is not there |
| 01:32.53 | osas | I see |
| 01:33.19 | osas | I will install my custom built ngrep to see how it works |
| 01:33.22 | rwhitby | yeah, use the real openwrt for ipv6 support ;-) |
| 01:33.48 | osas | the real openwrt doesn't support my router |
| 01:33.59 | eno | better bump the IPK_VERSION of these packages |
| 01:34.03 | rwhitby | really? that's surprising. what router is it? |
| 01:34.09 | osas | I hone sec |
| 01:34.12 | osas | one sec |
| 01:34.36 | osas | WRTSL54GS |
| 01:34.47 | osas | it is the one with the USB port |
| 01:35.06 | rwhitby | and you've tried the kamikaze 7.07 version of openwrt? |
| 01:35.31 | osas | last time when I checked, the support wasn't there |
| 01:37.28 | eno | osas, http://wiki.openwrt.org/OpenWrtDocs/Hardware/Linksys/WRTSL54GS |
| 01:38.26 | osas | the stable is supported |
| 01:39.04 | osas | I'm trying to find the web page that stated the latest kamikaze did not have support for this particular router ... |
| 01:41.39 | osas | oh ... I think that was related to 2.6 kernels ... |
| 01:41.56 | osas | dd-wrt seems to do the job for me ... |
| 01:42.28 | osas | and it is running ok with syslog-ng, rtpproxy, openser and monit |
| 01:42.43 | osas | except that I needed to downgrade syslog-ng |
| 01:42.57 | osas | it was crashing on handling the SIGHUP signal |
| 01:43.51 | osas | rwithby: do you think that we can add asterisk 1.4 to the openslug 3.10 feed? |
| 01:45.36 | rwhitby | does it build? |
| 01:45.41 | osas | yup |
| 01:46.00 | osas | openembedded guys enable it on their feeds |
| 01:46.31 | osas | I worked with steliosk on the bb file |
| 01:46.48 | rwhitby | can you do a patch against the slugos-3.10-beta svn ? |
| 01:47.00 | osas | yup |
| 01:48.18 | rwhitby | ok, send me a patch against http://svn.nslu2-linux.org/svnroot/slugos/releases/slugos-3.10-beta which only changes the minimum packages required, and I'll take a look at it |
| 01:48.32 | osas | ok |
| 01:57.01 | rwhitby | osas: I'm going to give your nslu2-linux ssl client certificate commit access to the slugos 3.10 stable feed. |
| 01:57.24 | osas | k |
| 01:57.49 | rwhitby | you are the most active person developing for that stable release, and I have 100% confidence in your development skills based on other things I have seen you doing here. |
| 01:58.11 | osas | thx |
| 01:59.06 | rwhitby | so let's start with asterisk, and look at other packages after that. |
| 01:59.20 | osas | I will take care of the asterisk push during the oct month |
| 01:59.36 | osas | I will be at astricon by the end of the month |
| 01:59.53 | osas | I will give a speech about running asterisk on embedded systems |
| 02:00.01 | rwhitby | ok, I'll make sure that our builder is regularly building that stable feed, so that you can see the results of your commits. |
| 02:00.48 | osas | and I will try to give a small demo: asterisk on openslug 3.10 running over WiFi |
| 02:00.53 | osas | k |
| 02:19.33 | *** join/#nslu2-linux leesiulung (n=leesiulu@c-67-182-166-75.hsd1.ca.comcast.net) |
| 02:56.53 | osas | arrgh ... |
| 02:57.10 | osas | ngrep compiled without IPV^ support works on ddwrt |
| 02:57.42 | osas | but I needed to add the nobody user to the /etc/passwd file |
| 02:58.06 | osas | if the user nobody is not there, ngrep will fail to start |
| 02:59.34 | osas | it will give the following error: attempt to drop privileges failed: getpwnam failed: Resource temporarily unavailable |
| 03:00.39 | rwhitby | osas: we have the adduser package for that |
| 03:01.23 | osas | eno: since ddwrt is used for both ddwrt and openwrt, I think we should leave the feed as is |
| 03:01.57 | osas | rwhitby: I know. The hard part was to figure out what was wrong ... |
| 03:02.16 | rwhitby | osas: we use the openwrt-ixp4xx feed for openwrt |
| 03:02.48 | rwhitby | oh, you mean mips openwrt |
| 03:08.50 | osas | yeah |
| 03:10.14 | osas | if we fix ddwrt, then we break openwrt (I suppose) |
| 03:10.36 | osas | so we will leave it as is, since tcpdump is working |
| 03:10.39 | osas | for both |
| 03:14.24 | eno | ideally we should have one feed for each |
| 03:14.53 | osas | :) |
| 03:29.04 | osas | I updated the ddwrt wiki page: # grep nobody /etc/passwd |
| 03:29.05 | osas | nobody:x:99:99:Nobody:/: |
| 03:29.14 | osas | http://www.dd-wrt.com/wiki/index.php/Optware |
| 03:41.58 | *** join/#nslu2-linux DrZimmerman (n=theo@2001:5c0:8fff:fffe:0:0:0:6af1) |
| 04:34.08 | *** join/#nslu2-linux UARsiGLpfvmfYTX (n=Sinclair@p57B4BFA2.dip0.t-ipconnect.de) |
| 04:37.10 | *** join/#nslu2-linux kadath_ (n=kadath@cpe-24-33-65-145.cinci.res.rr.com) |
| 05:06.04 | *** join/#nslu2-linux ch4os_ (n=ch4os@unaffiliated/ch4os/x-059673) |
| 05:08.49 | *** join/#nslu2-linux ch4os2 (n=ch4os@unaffiliated/ch4os/x-059673) |
| 05:16.17 | *** join/#nslu2-linux pleemans (n=peter@leemanpe.ugent.be) |
| 05:50.39 | *** join/#nslu2-linux jacques (n=jacques@nslu2-linux/jacques) |
| 06:10.26 | *** join/#nslu2-linux ka6sox (n=ka6sox@nslu2-linux/ka6sox) |
| 06:33.57 | *** join/#nslu2-linux kadath (n=kadath@cpe-24-33-65-145.cinci.res.rr.com) |
| 06:40.11 | *** join/#nslu2-linux kadath (n=kadath@cpe-24-33-65-145.cinci.res.rr.com) |
| 06:55.34 | CIA-8 | 03oleo * r6877 10optware/trunk/ (3 files in 2 dirs): transmission: reskin by velcrow and stopping torrents by fatsu |
| 07:07.36 | *** join/#nslu2-linux kolla (n=kolla@drift1.uninett.no) |
| 07:13.34 | *** join/#nslu2-linux |Lunar_Lamp| (n=Lunar_La@78.86.133.192) |
| 07:13.57 | oleo | osas: I am using openwrt-brcm24 feed for Kamikaze. |
| 07:29.26 | *** join/#nslu2-linux kadath (n=kadath@cpe-24-33-65-145.cinci.res.rr.com) |
| 08:03.01 | *** join/#nslu2-linux kadath (n=kadath@cpe-24-33-65-145.cinci.res.rr.com) |
| 08:17.49 | *** join/#nslu2-linux lyakh (n=lyakh@dynamic-unidsl-85-197-26-24.westend.de) |
| 08:31.22 | *** join/#nslu2-linux eiffel_ (n=eiffel@p5B0517D5.dip0.t-ipconnect.de) |
| 09:08.06 | lyakh | sorry, nobody replies on "-general", can anyone, perhaps, shortly explain what is supposed to happen with the debian image, i.e., whether it is using an initrd, and why it doesn't work for me when flashed directly onto an uninitialized nslu2? |
| 09:08.24 | lyakh | uninitialized means without first flashing it with stock cisco firmware |
| 09:24.43 | *** join/#nslu2-linux mithro (n=tim@ppp246-117.static.internode.on.net) |
| 09:32.15 | *** join/#nslu2-linux kadath (n=kadath@cpe-24-33-65-145.cinci.res.rr.com) |
| 09:35.36 | lyakh | does anyone have 2.6.22 running on nslu2? |
| 09:36.29 | lyakh | need a .config, as I don't have it running and there's no defconfig... |
| 09:42.31 | *** join/#nslu2-linux kadath (n=kadath@cpe-24-33-65-145.cinci.res.rr.com) |
| 10:47.30 | rwhitby | lyakh: check the nslu2-linux svn kernel repo |
| 10:48.07 | lyakh | rwhitby, I've got a config from the debian package so far, is it ok? |
| 10:48.12 | lyakh | from 2.6.22 |
| 10:49.07 | rwhitby | yep, that will work with the debian kernel |
| 10:49.19 | lyakh | but my cross-compiler seems to be unable to build it: " CC mm/page_alloc.o |
| 10:49.19 | lyakh | /tmp/ccdDkwOT.s: Assembler messages: |
| 10:49.19 | lyakh | /tmp/ccdDkwOT.s:3183: Error: .err encountered |
| 10:49.19 | lyakh | " |
| 10:49.39 | lyakh | arm-linux-gcc (GCC) 3.3.2 20030820 (prerelease) |
| 10:50.03 | lyakh | and the pre-compiled cross-toolchain link doesn't work... |
| 10:52.46 | *** join/#nslu2-linux Airw0lf (n=Miranda@203.118.156.53) |
| 10:53.04 | lyakh | ok, re-flashed linksys firmware from linksys site, configured it over http, flashed debian image again |
| 10:53.31 | lyakh | now ready-status gives 2 orange flashes repeatedly |
| 10:54.57 | rwhitby | lyakh: FYI: the debian/nslu2 support channel is #debian-arm on irc.debian.org - if it's an installer problem rather than an nslu2 problem, then you're more likely to get an answer there. |
| 10:55.58 | lyakh | no, I didn't use the installer |
| 10:56.21 | lyakh | used the direct "file-copy" method |
| 10:59.12 | *** join/#nslu2-linux lyakh (n=lyakh@dynamic-unidsl-85-197-26-24.westend.de) |
| 11:12.35 | *** part/#nslu2-linux Airw0lf (n=Miranda@203.118.156.53) |
| 11:14.34 | rwhitby | lyakh: dunno about the leds - I'm never looking at my nslu2 when installing anything - always have a serial port. |
| 11:15.30 | lyakh | yeah, I don't have any more free serial ports, even with already 2 usb-serial adapters... |
| 11:16.01 | lyakh | so, would rather avoid soldering it, I need it for a static role (ghm...) |
| 11:37.53 | *** join/#nslu2-linux widrone (n=drones@17.84-49-227.nextgentel.com) |
| 12:09.32 | CIA-8 | 03rwhitby * r918 10kernel/trunk/ (Makefile patches/2.6.22/KERNEL): Updated the unstable version to 2.6.22.6 |
| 12:18.15 | *** join/#nslu2-linux ch4os_ (n=ch4os@unaffiliated/ch4os/x-059673) |
| 13:02.02 | *** join/#nslu2-linux GPSFan (n=kenm@12.10.255.248) |
| 13:18.07 | *** join/#nslu2-linux fcarolo (n=c907ba42@limax.nslu2.osuosl.org) |
| 13:20.40 | lyakh | maybe here: has anyone ever flashed kernel and initrd manually over /dev/mtd? (e.g., like in http://www.nslu2-linux.org/wiki/Debian/Bootstrap) after building them from sid kernel package?... |
| 13:32.58 | *** join/#nslu2-linux hillct (n=H@cpe-024-211-242-232.nc.res.rr.com) |
| 13:44.36 | *** join/#nslu2-linux osas (n=nnnnnnos@i216-58-54-200.cybersurf.com) |
| 13:44.47 | lyakh | ok, of course it didn't work out-of-the-box. the bootloader doesn't support initrd, I guess |
| 13:50.41 | fcarolo | lyakh: are you sure it's a problem with initrd? |
| 13:51.19 | fcarolo | lyakh: I am not an expert on this, but the bootloader should not |
| 13:51.36 | fcarolo | care about initrd. The kernel and slugimage should |
| 13:52.03 | fcarolo | lyakh: and you must remember to include the firmware for the NPE-B in the flash image |
| 13:53.11 | fcarolo | lyakh: I am assuming you followed http://www.nslu2-linux.org/wiki/Debian/BuildImage |
| 13:53.17 | lyakh | fcarolo, AFAIK, the bootloader loads the initrd in RAM and passes its location to the kernel |
| 13:54.42 | lyakh | no, I didn't follow that page, I didn't want to build from sources (need a new cross-toolchain), just wanted to use the 2.6.22 from sid |
| 13:57.30 | fcarolo | lyakh: have you seen this? http://www.mail-archive.com/debian-arm@lists.debian.org/msg07018.html |
| 13:57.50 | fcarolo | lyakh: looks similar to what you want |
| 14:00.13 | lyakh | ok, thanks, reading... |
| 14:01.08 | lyakh | hm, "dpkg -i" + reboot hanged in my case... |
| 14:02.13 | lyakh | will have to ask on the ML myself, thanks for the link! |
| 14:02.15 | lyakh | bbl |
| 14:03.57 | rwhitby | lyakh: for initrd, you may need to pad it with zeros |
| 14:04.10 | *** join/#nslu2-linux yvasilev (n=yvasilev@Dune.math.cinvestav.mx) |
| 14:04.13 | rwhitby | but the flash-kernel script in debian should do this for you |
| 14:04.44 | lyakh | rwhitby, at least I compared mtd3 and kernel - they were different |
| 14:04.54 | lyakh | so, looks like dpkg didn't flash |
| 14:06.03 | lyakh | never heard about zero-padding initrd?... |
| 14:06.04 | rwhitby | dpkg will flash the kernel and init on a correctly installed debian on nslu2 |
| 14:06.44 | lyakh | even if I install a kernel from sid onto etch? |
| 14:07.12 | rwhitby | if it's an ixp4xx kernel, and Debian was installed with the installer for ixp4xx, yes. |
| 14:07.40 | lyakh | no, installer is broken currently (according to wiki), so, debootstrapped |
| 14:08.28 | lyakh | Kernel: |
| 14:08.31 | lyakh | Linux version 2.6.18-4-ixp4xx (Debian 2.6.18.dfsg.1-12) (waldi@debian.org) (gcc |
| 14:08.31 | lyakh | version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Tue Mar 27 18:01:56 BST 2007 |
| 14:08.32 | rwhitby | ok, did you install nslu2-utils package? |
| 14:09.03 | lyakh | yes |
| 14:09.16 | rwhitby | do you have a flash-kernel script? |
| 14:09.35 | lyakh | yes |
| 14:10.36 | osas | oleo: openwrt-brcm24 feed for Kamikaze for WRTSL54GS? |
| 14:11.30 | lyakh | ok, away now, thanks so far, more in ~4 hours. cheers |
| 14:12.33 | rwhitby | lyakh: I'll be asleep. GMT+9:30 |
| 14:33.51 | *** join/#nslu2-linux HopsNBarley (n=hops@nslu2-linux/HopsNBarley) |
| 14:44.15 | fcarolo | rwhitby: do you know if the autobuilder is ok? |
| 14:44.35 | fcarolo | rwhitby: last log is from yesterday night, after it tried to build a _lot_ of stuff |
| 14:55.06 | rwhitby | fcarolo: there has been some churn, yes. |
| 15:09.32 | ka6sox | :) |
| 15:13.12 | *** join/#nslu2-linux dwery (n=dwery@nslu2-linux/dwery) |
| 15:36.11 | fcarolo | rwhitby: ok, I was afraid it could be tied in a loop rebuilding lots of stuff |
| 15:52.34 | *** part/#nslu2-linux hillct (n=H@cpe-024-211-242-232.nc.res.rr.com) |
| 15:53.59 | rwhitby | fcarolo: thx for checking |
| 16:06.51 | *** join/#nslu2-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 16:41.56 | CIA-8 | 03bzhou * r6878 10optware/trunk/make/libnxml.mk: libnxml: 0.18.0 -> 0.18.1 |
| 16:50.38 | fcarolo | eno: I would like to bump glib from 2.6.6 to 2.9.6, do you see any problem |
| 16:54.54 | eno | fcarolo: it's about time, quite lot of packages depend on glib |
| 16:55.21 | eno | so maybe we should try it on 1 platform first |
| 16:55.46 | eno | maybe try slugosbe first |
| 16:55.56 | fcarolo | eno: ok, I ran into a bug proting castget, tested in my slug with success |
| 16:56.31 | fcarolo | I have a new slug waiting to test slugosbe 4.x, I'll run some tests there too |
| 16:57.06 | fcarolo | by the way, I got an error trying to build the toolchain to build optware for slugosbe |
| 16:57.42 | eno | slugosbe toolchain is borrowed from slugosbe build |
| 17:00.25 | fcarolo | so I should build slugosbe-image first? |
| 17:01.00 | eno | http://www.nslu2-linux.org/wiki/Optware/SlugosbeDevel |
| 17:03.44 | fcarolo | do I need something different t to build packages for slugosbe 4.5? |
| 17:03.53 | fcarolo | the wiki only mentions 3.10 |
| 17:15.47 | eno | strictly speaking, optware slugosbe feed should be specific to slugosbe release version |
| 17:16.02 | eno | but it's not the case |
| 17:17.11 | eno | right now, the slugosbe feed is using latest toolchain of slugosbe |
| 17:26.42 | eno | looks like glib 2.6.6 /opt/lib/libglib-2.0.so.0.600.6 |
| 17:26.49 | eno | and glib 2.9.6 /opt/lib/libglib-2.0.so.0.902.4 |
| 17:27.44 | eno | so it should not even need dependent packages to change anything |
| 17:36.01 | eno | tested irssi, mc, & pal on slugosbe with glib-2.9.6, all work |
| 17:36.52 | eno | seems pretty safe, the beauty of shared lib |
| 17:44.50 | CIA-8 | 03bzhou * r6879 10optware/trunk/make/adns.mk: adns: corrected symlink using wildcard |
| 17:46.08 | eno | fcarolo: tested a couple more packages, i think it's safe to move to 2.9.6 for all platforms |
| 18:17.36 | ka6sox | mips and ppc too? |
| 18:18.39 | eno | ka6sox: we're talking about updating glib from 2.6.6 to 2.9.6 |
| 18:18.59 | eno | yes, all optware platforms |
| 18:20.08 | eno | glib is pretty much the non-GUI part of gtk |
| 18:20.47 | ka6sox | okay |
| 18:22.58 | mwester | Ah - thanks. I was confoosing it with glibc. |
| 18:23.37 | ka6sox | me too...just one silly little letter |
| 18:23.58 | eno | the name is very confusing indeed |
| 18:25.26 | CIA-8 | 03bzhou * r6880 10optware/trunk/make/glib.mk: glib: 2.6.6 -> 2.9.6 |
| 18:29.20 | eno | fcarolo: hope you don't mind i did the check-in ^^^^^^^^^ |
| 18:47.22 | *** join/#nslu2-linux Ragnor (n=Ragnor@dslb-084-060-177-122.pools.arcor-ip.net) |
| 18:53.11 | *** join/#nslu2-linux caplink811-log (n=caplink8@dslb-088-073-132-029.pools.arcor-ip.net) |
| 19:42.24 | fcarolo | eno: sorry, I went away for a while in a hury |
| 19:43.02 | fcarolo | thanks for the check-in, I'll do more test on castget before committing |
| 19:46.46 | lyakh | I hope rwhitby sleeps well, can anyone except him explain, why installing linux-image-2.6.22-2-ixp4xx_2.6.22-4_arm.deb (from sid) on an etch nslu2 didn't work? |
| 19:55.00 | osas | lyakh: don't know what your problem is, but keep in mind that the on board ethernet driver is not supported by the std. debian distribution |
| 19:55.53 | lyakh | I have firmware stored under /lib/firmware, and the 2.6.18 from etch works |
| 19:57.30 | lyakh | But I think this is not the problem: |
| 19:58.19 | lyakh | before I had firmware installed, 2.6.18 booted, but I couldn't access the system over net. After swicthing off I could see 2.6.18 log in /var/log/messages |
| 19:58.26 | lyakh | but there's nothing from 2.6.22 |
| 19:58.37 | lyakh | I do suspect the initrd didn't work. |
| 19:58.46 | lyakh | 2.6.18 doesn't use it, right? |
| 19:58.58 | lyakh | if it did, I would see entries in messages? |
| 19:59.22 | osas | don't know ... |
| 19:59.25 | lyakh | wait, I'm wrong... |
| 19:59.40 | osas | do you have a serial console attached to your slug? |
| 19:59.50 | lyakh | Sep 19 13:46:36 nslu2 kernel: checking if image is initramfs... it is |
| 19:59.51 | lyakh | Sep 19 13:46:36 nslu2 kernel: Freeing initrd memory: 4096K |
| 19:59.57 | lyakh | heh, if I did... |
| 20:00.30 | osas | I had debian installed on one of my slugs, then switched from stable to testing |
| 20:00.40 | osas | performed an upgrade and then it died |
| 20:00.40 | osas | :( |
| 20:00.51 | osas | so I reflashed openslug 3.10 |
| 20:01.04 | osas | and I'm much happier :) |
| 20:01.21 | osas | openslug seems to be way faster ... |
| 20:01.27 | lyakh | what kernel is it? |
| 20:01.36 | osas | on openslug? |
| 20:01.37 | osas | one sec |
| 20:02.14 | osas | 2.6.16 |
| 20:02.45 | osas | but you can build the slugosbe image |
| 20:02.46 | lyakh | I need 2.6.2x, ok, can compile it myself, but do not want to compile the cross-toolchain... |
| 20:02.58 | osas | and there you have a pretty recent kernel |
| 20:03.18 | lyakh | 2.6.16? no, it's old |
| 20:03.29 | osas | works for me :) |
| 20:03.43 | lyakh | zd1211rw is in the kernel from 2.6.20 |
| 20:04.16 | osas | I have zd1211b working ok |
| 20:04.29 | lyakh | with the external driver? |
| 20:04.54 | osas | what do you mean by external driver? |
| 20:05.14 | lyakh | out of tree |
| 20:05.34 | osas | I have a Belkin USB WiFI dongle working with the driver that I built (cross compiled) |
| 20:05.57 | osas | the package is available on the svn |
| 20:06.16 | osas | but it is not compiled by default and therefore it is not in the feeds |
| 20:06.29 | lyakh | yes, for kernels before 2.6.20 you had to build a driver from separate sources. from 2.6.20 it is in the mainline |
| 20:06.35 | osas | yup |
| 20:07.06 | osas | I spent a few hours until I figure out what I'm building and what hw to buy |
| 20:07.16 | osas | but in the end it turn out ok :) |
| 21:00.07 | CIA-8 | 03fcarolo * r6881 10optware/trunk/make/libxml2.mk: libxml2: fixed dependency from libxml2.mk itself |
| 21:35.31 | *** join/#nslu2-linux Y`gYupQOgefvDlX (n=Sinclair@p57B4BFA2.dip0.t-ipconnect.de) |
| 22:27.29 | *** join/#nslu2-linux drath (i=vmaster@p5B07EFC2.dip.t-dialin.net) |
| 22:30.04 | *** join/#nslu2-linux yvasilev (n=yvasilev@189.140.153.244) |
| 23:30.59 | *** join/#nslu2-linux mithro (n=tim@secure.astc-design.com) |
| 23:41.45 | CIA-8 | 03bzhou * r6882 10optware/trunk/make/ntpclient.mk: ntpclient: make build stable |