| 00:24.27 | *** join/#nslu2-linux ByronT (n=byron-po@nslu2-linux/ByronT) |
| 00:39.09 | *** join/#nslu2-linux mithro_ (n=tim@lester.mithis.com) |
| 00:39.16 | *** join/#nslu2-linux jacques (n=jacques@cpe-66-69-157-195.houston.res.rr.com) |
| 00:47.47 | *** join/#nslu2-linux mwester-laptop (n=chatzill@nslu2-linux/mwester) |
| 01:08.50 | CIA-8 | 03bzhou * r4233 10optware/trunk/make/py-genshi.mk: py-genshi: upstream upgrade to 0.3.3 |
| 01:09.12 | CIA-8 | 03bzhou * r4234 10optware/trunk/make/py-routes.mk: py-routes: upstream upgrade to 1.5.2 |
| 01:47.18 | *** join/#nslu2-linux Vantage13 (n=Vantage@www.toddcharron.com) |
| 02:52.36 | *** part/#nslu2-linux Vantage13 (n=Vantage@www.toddcharron.com) |
| 03:30.50 | *** join/#nslu2-linux EvilDevil_ (n=miau@p54A6FEC5.dip.t-dialin.net) |
| 03:36.13 | *** join/#nslu2-linux mithro (n=tim@lester.mithis.com) |
| 03:48.47 | *** join/#nslu2-linux bullet (n=bullet@216.211.203.62.cust.bluewin.ch) |
| 04:01.51 | *** join/#nslu2-linux DrZimmerman (n=theo@84-72-181-62.dclient.hispeed.ch) |
| 04:16.32 | *** join/#nslu2-linux NQC (n=Sinclair@p54A08311.dip0.t-ipconnect.de) |
| 06:06.07 | *** join/#nslu2-linux bullet_ (n=bullet@201.23.78.83.cust.bluewin.ch) |
| 06:16.22 | CIA-8 | 03rwhitby * r4235 10optware/trunk/sources/fsg3-bootstrap/ (bootstrap.sh preinst): fsg3-bootstrap: minor changes, still untested |
| 06:16.42 | CIA-8 | 03rwhitby * r4236 10optware/trunk/.cvsignore: ignore fsg3 and ddwrt build dirs |
| 06:19.45 | CIA-8 | 03rwhitby * r4237 10optware/trunk/: |
| 06:34.54 | *** join/#nslu2-linux mwester_ (n=mwester@nslu2-linux/mwester) |
| 07:11.27 | CIA-8 | 03rwhitby * r4238 10optware/trunk/make/clamav.mk: clamav: /opt/man needed to be changed to /opt/share/man to build |
| 07:18.03 | CIA-8 | 03rwhitby * r4239 10optware/trunk/make/clamav.mk: clamav: revert last change - seems to be an fsg3 problem only |
| 07:25.30 | rwhitby | aha - autoconf 2.59 and autoconf 2.60 give different locations for the man directories! |
| 07:25.56 | rwhitby | hence nudi (running sarge) has different paths from my etch build host |
| 07:33.43 | *** join/#nslu2-linux CieD (n=CieD@host86-136-77-105.range86-136.btcentralplus.com) |
| 07:51.17 | *** join/#nslu2-linux kolla (n=kolla@firda.uninett.no) |
| 08:03.24 | CIA-8 | 03oleo * r4240 10optware/trunk/ (4 files in 2 dirs): transmission: daemon message queuing and URL fixes |
| 08:18.28 | *** join/#nslu2-linux bullet (n=bullet@84.58.62.81.cust.bluewin.ch) |
| 08:21.57 | CIA-8 | 03rwhitby * r4241 10optware/trunk/ (5 files in 2 dirs): fsg3-bootstrap: more fixes - still untested |
| 08:26.34 | NAiL | rwhitby: I can test later today I hope |
| 08:28.26 | *** join/#nslu2-linux [cc]smart (n=[cc]smar@gw.ptr-62-65-142-223.customer.ch.netstream.com) |
| 08:28.41 | rwhitby | NAiL: need to clean out the ds101 library stuff which is not needed |
| 08:28.58 | NAiL | aha |
| 08:29.34 | rwhitby | also need to add an S99optware symlink to /etc/init.d/optware |
| 08:29.59 | rwhitby | it would be good to start with no libraries, and work up from there. |
| 08:30.35 | rwhitby | and we definitely do not want to touch ld.so.conf or run ldconfig - we use -rpath at compile-time for that stuff |
| 08:31.09 | rwhitby | NAiL: why do you do stuff in -stage for the bootstrap? |
| 08:31.36 | NAiL | the last stuff that was done was basically a hack |
| 08:31.48 | rwhitby | surely nothing calls fsg3-bootstrap-stage, does it? |
| 08:34.14 | NAiL | Not sure |
| 08:34.27 | NAiL | It's been too long since I actively worked on ds101-bootstrap |
| 08:34.52 | CIA-8 | 03rwhitby * r4242 10optware/trunk/make/fsg3-bootstrap.mk: fsg3-bootstrap: removed all the libraries - still untested |
| 08:35.00 | rwhitby | ok, that should be a safe base to start from |
| 08:35.32 | rwhitby | I need to get an sftp server on the fsg asap |
| 08:37.45 | rwhitby | NAiL: do you have an fsg3 original firmware build environment? |
| 08:38.27 | NAiL | no, do I need one? |
| 08:39.10 | rwhitby | Their source distro has an sftp-server.c which would match the ssh in the stock firmware |
| 08:40.01 | NAiL | install: cannot create regular file `/home/repvik/slug/optware/builds/fsg3-bootstrap-0.1-ipk/etc/init.d/optware': No such file or directory |
| 08:40.04 | NAiL | make: *** [/home/repvik/slug/optware/builds/fsg3-bootstrap_0.1-0_armeb.ipk] Error 1 |
| 08:40.16 | rwhitby | that should be fixed in the latest commit |
| 08:40.21 | NAiL | ah, ok |
| 08:40.29 | rwhitby | NAiL: here is my /etc/int.d/fan file: |
| 08:40.36 | rwhitby | #! /bin/sh |
| 08:40.37 | rwhitby | case "$1" in |
| 08:40.37 | rwhitby | <PROTECTED> |
| 08:40.37 | rwhitby | <PROTECTED> |
| 08:40.37 | rwhitby | # /usr/bin/fand > /dev/null |
| 08:40.37 | rwhitby | <PROTECTED> |
| 08:40.39 | rwhitby | <PROTECTED> |
| 08:40.43 | rwhitby | <PROTECTED> |
| 08:40.45 | rwhitby | <PROTECTED> |
| 08:40.47 | rwhitby | <PROTECTED> |
| 08:40.49 | rwhitby | <PROTECTED> |
| 08:40.51 | rwhitby | <PROTECTED> |
| 08:40.53 | rwhitby | <PROTECTED> |
| 08:40.55 | rwhitby | # killall fand |
| 08:40.57 | rwhitby | <PROTECTED> |
| 08:40.59 | rwhitby | <PROTECTED> |
| 08:41.01 | rwhitby | <PROTECTED> |
| 08:41.04 | rwhitby | <PROTECTED> |
| 08:41.05 | rwhitby | esac |
| 08:41.08 | rwhitby | exit 0 |
| 08:41.09 | rwhitby | 34 seems to be nice and quiet :-) |
| 08:41.48 | rwhitby | NAiL: back later |
| 08:42.08 | rwhitby | but not too late - gotta get some sleep tonight before I spend 24 hours travelling to the US tomorrow |
| 08:42.26 | rwhitby | 24 hours to get there, 48 hours there, 24 hours to get home again. |
| 08:42.54 | NAiL | ouch |
| 08:43.06 | NAiL | should've been fixed. I still get the same error |
| 08:43.17 | NAiL | I'll try to look at it after work |
| 08:45.48 | CIA-8 | 03rwhitby * r4243 10optware/trunk/make/fsg3-bootstrap.mk: fsg3-bootstrap: fixed missing mkdir |
| 08:46.03 | rwhitby | should be fixed now - I fixed it in the staging, which I then deleted :-) |
| 09:28.53 | *** join/#nslu2-linux tobbe (n=tobbe@nomad51201.netlogon.lu.se) |
| 09:31.27 | *** join/#nslu2-linux mithro (n=tim@ppp246-117.static.internode.on.net) |
| 09:33.59 | *** join/#nslu2-linux kolla (n=kolla@firda.uninett.no) |
| 10:13.50 | *** join/#nslu2-linux rwhitby (n=rwhitby@nslu2-linux/rwhitby) |
| 10:26.36 | rwhitby | NAiL: fsg3-bootstrap 1.0 almost ready |
| 10:43.00 | CIA-8 | 03rwhitby * r4244 10optware/trunk/ (6 files in 2 dirs): fsg3-bootstrap: Version 1.0 ready for beta testing |
| 10:43.33 | rwhitby | NAiL: there you go |
| 10:46.15 | barnseenio | could someone help me, i wish to compile the latest head of rtorrent for debianslug. i tried creating an ARM cross compiler in debian, but i got some errors when debuilding gcc, the mailing list suggested i use the mastermake file to get a build environment. i have done that and successfully compiled debianslug image, however im not sure how i can then go on to compile rtorrent. any help would be graciously recieved! |
| 10:52.14 | rwhitby | barnseenio: once you have compiled the image, you have a nice arm cross compiler in tmp/cross/bin |
| 10:52.28 | barnseenio | aah .. exactly what i needed to know! |
| 10:53.54 | barnseenio | aah |
| 10:54.00 | barnseenio | thanks |
| 10:54.37 | rwhitby | barnseenio: you're welcome |
| 10:55.35 | rwhitby | barnseenio: BTW, you should refer to your system as Debian/NSLU2 rather than debianslug, cause debianslug is ambiguous as to whether you mean Debian/NSLU2 or SlugOS/LE (both of which are referred to as [Dd]ebian[Ss]lug) |
| 10:55.55 | barnseenio | gotcha, i really didnt understand the comment you made about that on the list |
| 10:56.08 | barnseenio | i thought slugod was called openslug ? |
| 10:56.12 | barnseenio | *slugos |
| 10:56.37 | rwhitby | openslug is SlugOS/BE |
| 10:56.50 | barnseenio | ah big and little |
| 10:56.53 | rwhitby | SlugOS/LE is the little-endian version, on which you can debootstrap to a Debian rootfs |
| 10:56.53 | barnseenio | im catching up |
| 10:57.19 | rwhitby | if you use the Debian installer (which contains the Debian kernel, rather than the SlugOS kernel), then you're running Debian/NSLU2, not SlugOS/LE |
| 10:57.54 | rwhitby | If you start with SlugOS/LE and debootstrap, then you're still running SlugOS/LE, but with a Debian rootfs. |
| 10:58.06 | barnseenio | hmm, crikey .. |
| 10:58.09 | rwhitby | both situations are colloquially referred to as DebianSlug :-) |
| 10:58.27 | barnseenio | i didnt use the debian installer, as i was told it had issues |
| 10:58.29 | rwhitby | The thing is that the SlugOS/LE kernel is more up to date than the Debian kernel |
| 10:58.36 | barnseenio | i believe i used the debootstrap method |
| 10:58.43 | rwhitby | Good - that's what I recommend. |
| 10:58.57 | rwhitby | So actually, you are running DebianSlug :-) |
| 10:59.02 | barnseenio | so, im running slugos/le ? |
| 10:59.30 | rwhitby | yeah, you've got SlugOS/LE kernel and modules, a SlugOS/LE rootfs in flash, and you pivot to a Debian rootfs on disk. |
| 11:00.19 | rwhitby | we trial kernel changes in the nslu2-linux kernel svn repo, then they migrate into SlugOS unstable, and separately they get into the Debian kernel. |
| 11:00.58 | rwhitby | e.g. at the moment we're moving SlugOS 4.x to the new open source ixp driver |
| 11:02.16 | barnseenio | thanks, i now understand! |
| 11:02.27 | rwhitby | np |
| 11:02.38 | rwhitby | always happy to help an nslu2 developer :-) |
| 11:03.00 | barnseenio | heh, well .. a real novice. |
| 11:03.31 | barnseenio | but i have loearned loads since owning the slug |
| 11:04.03 | barnseenio | -o |
| 11:06.01 | NAiL | rwhitby: ok, I'll try to get around to it tonight :) |
| 11:06.37 | rwhitby | NAiL: just fixing the makefile dependencies now so I can get the bootstrap scripts into the feeds |
| 11:08.41 | rwhitby | NAiL: for some reason, the -xsh target always rebuilds |
| 11:11.03 | CIA-8 | 03rwhitby * r4245 10optware/trunk/ (Makefile make/ds101-bootstrap.mk make/fsg3-bootstrap.mk): {ds101,fsg3}-bootstrap: Add bootstrap scripts to the feeds. |
| 11:12.00 | rwhitby | ok, that will at least get the scripts into the feeds |
| 11:12.10 | rwhitby | but they will be rebuilt every time the autobuilder runs |
| 11:12.30 | *** join/#nslu2-linux caplink811 (n=Joerg@213.71.162.138) |
| 11:17.23 | rwhitby | NAiL: has glibc for ds101 moved from 2.2.5 to 2.3.3 ? |
| 11:18.19 | CIA-8 | 03rwhitby * r4246 10optware/trunk/make/ds101-bootstrap.mk: ds101-bootstrap: glibc changed from 2.2.5 to 2.3.3 |
| 11:18.40 | NAiL | I believe so, can't check right now (@work) |
| 11:18.49 | NAiL | I've tried getting the feeds rebuilt |
| 11:22.37 | CIA-8 | 03rwhitby * r4247 10optware/trunk/make/ds101-bootstrap.mk: ds101-bootstrap: remove foo.dir directories |
| 11:23.18 | barnseenio | nslu2@exeterdeb:~$ file a.out |
| 11:23.18 | barnseenio | a.out: ELF 32-bit LSB executable, ARM, version 1 (ARM), for GNU/Linux 2.4.0, dynamically linked (uses shared libs), for GNU/Linux 2.4.0, not stripped |
| 11:23.25 | barnseenio | rock on |
| 11:23.42 | barnseenio | although i did get this error |
| 11:23.43 | barnseenio | <PROTECTED> |
| 11:23.51 | barnseenio | *warning |
| 11:24.06 | CIA-8 | 03rwhitby * r4248 10optware/trunk/make/ds101-bootstrap.mk: ds101-bootstrap: remove foo.dir directories |
| 11:26.11 | CIA-8 | 03rwhitby * r4249 10optware/trunk/make/libnsl.mk: libnsl: glibc update |
| 11:26.22 | rwhitby | barnseenio: I don't know anything about interworking |
| 11:26.29 | barnseenio | neither do i! |
| 11:26.41 | barnseenio | what is it? |
| 11:27.04 | rwhitby | an execution paradigm on arm processors, interworking between thumb and non-thumb I think |
| 11:27.20 | rwhitby | NAiL: ds101 feed building |
| 11:27.52 | barnseenio | all the program contained was #include <stdio.h> |
| 11:29.02 | rwhitby | NAiL: optware-ds101 built |
| 11:33.01 | *** join/#nslu2-linux blaster8 (n=blaster8@jeharrap.joh.cam.ac.uk) |
| 11:33.19 | barnseenio | google suggest "Put -mthumb-interwork on the gcc command line." |
| 11:33.31 | barnseenio | which stops the warning, although im not sure why it appears |
| 11:34.27 | rwhitby | FYI: I've installed git-core on the autobuild machine from backports.org (so that OE will continue to build) |
| 12:25.28 | *** join/#nslu2-linux vmaster_ (n=vmaster@p549B6BB3.dip.t-dialin.net) |
| 12:34.28 | CIA-8 | 03blaster8 * r490 10kernel/trunk/patches/2.6.18/ (4 files): Add MAC address randomisation bypass to 2.6.18 |
| 12:42.33 | CIA-8 | 03blaster8 * r491 10kernel/trunk/patches/2.6.18/ (3 files): General 2.6.18 refresh |
| 12:52.04 | CIA-8 | 03rwhitby * r4250 10optware/trunk/ (make/openssh.mk sources/openssh/rc.openssh): openssh: remove the dependency on pidof |
| 12:57.49 | CIA-8 | 03oleo * r4251 10optware/trunk/ (make/transmission.mk sources/transmission/README.daemon): transmission: add README notice for wl500g uClibc 0.9.19 problem |
| 13:02.50 | CIA-8 | 03rwhitby * r4252 10optware/trunk/ (make/openssh.mk sources/openssh/rc.openssh): openssh: remove explicit path from killall |
| 13:20.09 | *** join/#nslu2-linux rwhitby-away (n=rwhitby@nslu2-linux/rwhitby) |
| 13:29.14 | CIA-8 | 03rwhitby * r4253 10optware/trunk/ (3 files in 2 dirs): ftpd-topfield: removed dependency on pidof for fsg3 |
| 13:37.08 | *** join/#nslu2-linux VoodooZ (n=VoodooZ@modemcable214.50-82-70.mc.videotron.ca) |
| 14:27.44 | *** join/#nslu2-linux booto (n=booto@dial00-034.dy.it.net.au) |
| 14:27.50 | booto | ~ |
| 14:34.40 | *** join/#nslu2-linux ByronT (n=byron-po@nslu2-linux/ByronT) |
| 14:43.36 | *** join/#nslu2-linux joshin (i=josh@VDSL-130-13-154-115.PHNX.QWEST.NET) |
| 15:04.54 | joshin | Is there enough room left in the slug's kernel partition for me to have builtin support for ipv6? |
| 15:17.21 | blaster8 | not atm |
| 15:17.28 | blaster8 | but eventually, yes |
| 15:17.33 | blaster8 | why can't you load modules? |
| 15:19.46 | *** join/#nslu2-linux yvasilev (n=yvasilev@dune.math.cinvestav.mx) |
| 15:45.44 | joshin | blaster8, I can load modules. I'm trying to debug an issue with glibc 2.5 and IPV6 so wanted to make sure that I'm not missing any modules. |
| 15:46.05 | VoodooZ | joshin, hey |
| 15:46.07 | blaster8 | ok |
| 15:46.17 | VoodooZ | Is that for your gentooslug? |
| 15:46.25 | joshin | Getting the following error any time something even things about IPV6: ../sysdeps/unix/sysv/linux/check_pf.c:68: make_request: Assertion `sizeof (req) - ((size_t) &((struct req *)0)->pad) == 3' failed. |
| 15:46.26 | joshin | Aborted |
| 15:46.34 | joshin | VoodooZ, yup. |
| 15:46.37 | blaster8 | eek |
| 15:46.38 | VoodooZ | cool. |
| 15:47.19 | joshin | blaster8, yeah. If things stick to v4 then all is fine. But when things ponder using v6 that error occurs. |
| 15:47.40 | joshin | Am rebuilding glibc after loading all the v6 modules I could find/think of. |
| 15:47.51 | barnseenio | anyone seen this before .. |
| 15:47.52 | barnseenio | checking the byte alignment... configure: error: cannot run test program while cross compiling |
| 15:47.55 | barnseenio | See `config.log' for more details. |
| 15:48.04 | barnseenio | im trying to compile rtorrent for debianslug |
| 15:48.13 | barnseenio | using the arm-linux.gcc cross compiler |
| 15:48.28 | barnseenio | atm the configure is barfing |
| 15:48.41 | joshin | barnseenio, are you specifying little endian? You may need to explicitly tell it byte alignment. |
| 15:48.59 | barnseenio | well .. its just after an endian test |
| 15:49.06 | barnseenio | checking whether byte ordering is bigendian... no |
| 15:49.07 | barnseenio | checking the byte alignment... configure: error: cannot run test |
| 15:49.32 | barnseenio | im not specifying atm (not really sure how) im running this atm |
| 15:49.33 | barnseenio | ./configure --host=arm-linux --without-openssl --prefix=/home/nslu2/installroot/ CC=/home/nslu2/slug/debianslug/tmp/cross/bin/arm-linux-gcc |
| 15:50.17 | joshin | barnseenio, then tell configure that you want it to build a little-endian binary |
| 15:50.30 | joshin | and no, I don't know the flag to use |
| 15:50.34 | joshin | :) |
| 15:50.37 | barnseenio | heh |
| 15:50.45 | barnseenio | dash |
| 15:50.46 | joshin | VoodooZ, stop thinking that! |
| 15:50.55 | joshin | You people... |
| 15:55.55 | VoodooZ | hehe |
| 15:58.15 | *** join/#nslu2-linux joshin (i=josh@VDSL-130-13-154-115.PHNX.QWEST.NET) |
| 16:03.31 | *** join/#nslu2-linux mithro (n=tim@ppp246-117.static.internode.on.net) |
| 16:05.33 | *** join/#nslu2-linux Tobbe (n=tobbe@kbhn-vbrg-sr0-vl203-120.perspektivbredband.net) |
| 16:06.41 | *** join/#nslu2-linux l0c4lh0st (n=a@j147098.upc-j.chello.nl) |
| 16:35.38 | *** join/#nslu2-linux mithro (n=tim@ppp246-117.static.internode.on.net) |
| 16:38.18 | *** join/#nslu2-linux AdamBaker (n=aab@userch028.dsl.pipex.com) |
| 16:42.26 | *** join/#nslu2-linux kfm82ibook (n=kfm82@p54BEF488.dip.t-dialin.net) |
| 16:45.31 | *** join/#nslu2-linux pleemans (n=peter@d51A5E421.access.telenet.be) |
| 17:23.55 | *** join/#nslu2-linux CieD (n=CieD@81.168.95.39) |
| 17:43.31 | *** join/#nslu2-linux blaster8 (n=blaster8@nslu2-linux/blaster8) |
| 17:44.48 | *** join/#nslu2-linux jake_ (i=jake@roadrunner.cx) |
| 17:56.13 | *** join/#nslu2-linux CieD (n=CieD@81.168.95.39) |
| 18:09.09 | *** join/#nslu2-linux blaster8 (n=blaster8@jeharrap.joh.cam.ac.uk) |
| 18:16.00 | *** join/#nslu2-linux blaster8 (n=blaster8@jeharrap.joh.cam.ac.uk) |
| 18:30.02 | CIA-8 | 03bzhou * r4254 10optware/trunk/Makefile: try rsync xsh file only when present |
| 18:53.05 | *** join/#nslu2-linux caplink811-log (n=caplink8@dslb-088-073-019-152.pools.arcor-ip.net) |
| 19:05.42 | *** join/#nslu2-linux [cc]smart (n=[cc]smar@gw.ptr-62-65-142-223.customer.ch.netstream.com) |
| 20:24.24 | barnseenio | any sluggers alive? |
| 20:26.45 | EvilDevil | alive and slugging |
| 20:32.44 | barnseenio | hey hey hye |
| 20:33.05 | barnseenio | im trying to compile latest rtorrent head for debianslug-LE |
| 20:33.21 | barnseenio | i feel like i keep edging forward, but not very fast! |
| 20:33.43 | barnseenio | i have the arm-linux-gcc from the mastermakefile |
| 20:34.01 | barnseenio | and various dependencies for rtorrent |
| 20:34.14 | barnseenio | but im now getting a error during the ./configure |
| 20:34.26 | barnseenio | checking whether byte ordering is bigendian... no |
| 20:34.26 | barnseenio | checking the byte alignment... configure: error: cannot run test program while cross compiling |
| 20:34.29 | barnseenio | See `config.log' for more details. |
| 20:45.36 | barnseenio | --enable-aligned=yes |
| 20:45.49 | barnseenio | lord thank #libtorrent |
| 20:54.44 | [g2] | barnseenio are you a torrent guy ? |
| 20:55.13 | barnseenio | not sure what that means? |
| 20:55.21 | barnseenio | im running rtorrent on my slug yes |
| 20:55.26 | [g2] | do you do some bit torrenting |
| 20:55.36 | barnseenio | yes |
| 20:56.09 | [g2] | ok I'm a torrent idiot, however I'm very nslu2-linux development savvy |
| 20:56.34 | [g2] | I'm just about ready to torrent a Ubuntu LiveCD with all the build tools and source :) |
| 20:56.36 | ByronT | [g2] are you sure about that? |
| 20:56.52 | ByronT | (about being n-l dev savvy?) ;) |
| 20:57.16 | [g2] | ByronT all engineering questions are relative ;) |
| 20:57.25 | barnseenio | ok [g2] |
| 20:57.36 | ByronT | [g2] - if you'll give me a seed, I'll be a torrent peer for ya |
| 20:57.56 | barnseenio | i could do with some bloody linux development savvy .. i'll be fucked if i can get this rtorrent to compile for ARM |
| 20:58.11 | barnseenio | sure, i'll seen if you like |
| 20:58.22 | barnseenio | its not illegal though is it? |
| 20:58.27 | [g2] | ByronT my hosting server can to nearly 7Mbs to the net |
| 20:58.32 | [g2] | but I'd like to have some seeds |
| 20:58.44 | ByronT | give me a linky! |
| 20:58.52 | [g2] | even though I've never torrented anything yet |
| 20:59.02 | ByronT | I've got AnalogX BitPump on the ready |
| 20:59.11 | barnseenio | yes, just post the .torrent somewhere, i have script sat on the slug ready and waiting |
| 20:59.24 | barnseenio | soooo |
| 20:59.40 | barnseenio | my rtorrent build .. |
| 20:59.45 | barnseenio | im now calling configure like this ... |
| 20:59.47 | barnseenio | ./configure --host=arm-linux --without-openssl --prefix=/home/nslu2/installroot/ CC=/home/nslu2/slug/debianslug/tmp/cross/bin/arm-linux-gcc CCX=/home/nslu2/slug/debianslug/tmp/cross/bin/arm-linux-g++ --enable-aligned=yes |
| 20:59.49 | [g2] | no it shouldn't be illegal anywhere, but it's a large world |
| 21:00.37 | barnseenio | exeterdeb:/home/nslu2/installroot/lib# file libtorrent.so.10.0.0 |
| 21:00.40 | barnseenio | libtorrent.so.10.0.0: ELF 32-bit LSB shared object, Intel 80386, version 1 (SY |
| 21:00.44 | barnseenio | ba*tard |
| 21:00.48 | [g2] | ByronT I was gonna target SlugOS 4.x |
| 21:01.19 | barnseenio | mm its CXX |
| 21:01.19 | [g2] | ByronT we can do an Intel IXP free release |
| 21:01.56 | [g2] | ByronT I'm running the non intel drivers on the Loft with 2.6.18 |
| 21:01.58 | ByronT | neato |
| 21:02.01 | [g2] | and debian |
| 21:02.24 | [g2] | I've got a couple 128MB systems and I'm setting up the regression lab |
| 21:02.36 | ByronT | makes all my machinations with Intel ppl who only respond after repeated prodding seem empty.... ;) |
| 21:02.50 | barnseenio | g2 do you run SlugOS/LE ? |
| 21:03.06 | [g2] | I run Debian/LE on IXP hw |
| 21:03.26 | [g2] | ~g2 |
| 21:03.27 | jbot | Easy to use, portable and powerful 2D graphics library. URL: http://www.ap.univie.ac.at/users/ljubo/g2/g2.shtml |
| 21:03.35 | [g2] | ~[g2] |
| 21:03.36 | jbot | hmm... [g2] is really cool, and an an all around nice guy! Also he is a real funny guy, the master of NSLU2 Buildroot and a known Slug Sacrificer. And editor of SlugNews. |
| 21:03.36 | barnseenio | and do you compile on slug, or have cross compile env? |
| 21:04.36 | [g2] | barnseenio I was here since the beginning 6/04. I've done a bit |
| 21:04.44 | ByronT | hmmm... I wonder what (if anything) has been written about me... |
| 21:04.48 | ByronT | ~ByronT |
| 21:05.01 | ByronT | aha nada! |
| 21:05.26 | [g2] | jbot ByronT is a crazy guy |
| 21:05.27 | jbot | okay, [g2] |
| 21:05.32 | ByronT | heh |
| 21:05.42 | [g2] | ~ByronT |
| 21:05.43 | jbot | hmm... byront is a crazy guy |
| 21:05.50 | [g2] | lol |
| 21:06.27 | [g2] | jbot no "ByronT" is a crazy guy |
| 21:06.28 | jbot | [g2]: I think you lost me on that one |
| 21:06.39 | [g2] | jbot "ByronT" is a crazy guy |
| 21:06.40 | jbot | [g2]: what are you talking about? |
| 21:07.03 | [g2] | anyway enough playing with the bot |
| 21:07.21 | *** join/#nslu2-linux rwhitby (n=rwhitby@nslu2-linux/rwhitby) |
| 21:07.30 | [g2] | ~rwhitby |
| 21:07.32 | jbot | extra, extra, read all about it, rwhitby is the owner of the nslu2-linux mailing list and IRC channel. He tries to provide some order to the burgeoning development around the NSLU2. You can find his website at http://www.rwhitby.net (where in particular, you will find information on Serial Port modifications for the Linksys WRT54G and NSLU2 devices). |
| 21:07.32 | ByronT | jbot ByronT is a crazy guy who bugged rwhitby until rwhitby semi-forcefully coerced him into cleaning up and maintaining the nslu2-based README and associated documentation. Also known as the newbie-helper and sometimes developer. |
| 21:07.34 | jbot | ...but byront is already something else... |
| 21:07.39 | barnseenio | so does it sound crazy that im in debian (not on slug) with the cross compilers built from the mastermakefile, and im running the ./configure specifying arm-linux-g++ etc as configure params... does all that shit sound like im barking up the wrong tree .. or is it essentially close? |
| 21:07.52 | ByronT | ~ByronT |
| 21:07.53 | jbot | hmm... byront is a crazy guy |
| 21:07.58 | *** join/#nslu2-linux joshin (i=josh@VDSL-130-13-154-115.PHNX.QWEST.NET) |
| 21:08.30 | dwery | nice bot ;) |
| 21:08.31 | [g2] | barnseenio Ok you've got the master makefile that built all the cross tools |
| 21:08.37 | rwhitby | barnseenio: that seems like a reasonable thing to do if you can't find a working packages arm cross compiler in debian |
| 21:08.38 | barnseenio | yuppe |
| 21:09.06 | [g2] | barnseenio running sarge ? |
| 21:09.08 | barnseenio | i didnt get ' working packages arm cross compiler' |
| 21:09.12 | barnseenio | yes sarge |
| 21:09.22 | [g2] | which package are you trying to build ? |
| 21:09.27 | [g2] | rtorrent ? |
| 21:09.31 | barnseenio | rtorrent/libtorrent |
| 21:09.54 | barnseenio | from latest head (i know i can apt-get an older version) |
| 21:11.05 | [g2] | barnseenio Ok.. I've got to run now I'll be back in several hours |
| 21:11.21 | [g2] | I can probably build the debian package easily |
| 21:11.30 | barnseenio | ok well, ive been struggling with this for a week .. so no rush ;-) |
| 21:12.08 | barnseenio | i'll linger in this channel for a few days so feel free to post back to it if you get anything |
| 21:12.16 | barnseenio | tbh id like to know how to do it myself |
| 21:12.25 | [g2] | sure |
| 21:12.31 | [g2] | ~nslu2-rules |
| 21:12.32 | jbot | somebody said nslu2-rules was 1) You must search the wiki before asking questions on IRC or mailing list. 2) You must follow the README steps precisely when flashing firmware. 3) Those who ask the questions, update the wiki with the answers. 4) Those who complain about doco, update the wiki to improve it. 5) Friends don't let friends flash custom firmware without ... |
| 21:12.32 | barnseenio | but id be really happy just to get the latest versioini, as it contains an important fix i need |
| 21:12.53 | [g2] | rule #3 right ? |
| 21:13.02 | rwhitby | we need to add 0) Never use the Linksys EraseAll tool. |
| 21:13.05 | barnseenio | aha, sure |
| 21:13.09 | [g2] | Ok |
| 21:13.24 | barnseenio | so far all im really doing is this .. incase its of use to you |
| 21:13.25 | barnseenio | svn co svn://rakshasa.no/libtorrent/trunk/libtorrent |
| 21:13.25 | barnseenio | ./configure --host=arm-linux --without-openssl --prefix=/home/nslu2/installroot/ CC=/home/nslu2/slug/debianslug/tmp/cross/bin/arm-linux-gcc CXX=/home/nslu2/slug/debianslug/tmp/cross/bin/arm-linux-g++ --enable-aligned=yes |
| 21:13.55 | eno | barnseenio: i would suggest you get distcc working first |
| 21:14.00 | barnseenio | oo |
| 21:14.03 | barnseenio | wasthat |
| 21:14.16 | eno | cross compilation usually takes more tweaking |
| 21:14.48 | eno | maybe search on how to build debian packages with distcc |
| 21:15.00 | barnseenio | i'll have a look |
| 21:15.11 | barnseenio | someone also suggest scratchbox |
| 21:16.02 | barnseenio | but it seemed nothing different to the arm-linux* compilers i already have |
| 21:16.02 | barnseenio | but in a chroot |
| 21:16.19 | [g2] | barnseenio which TZ are you in ? GMT +/- n |
| 21:16.46 | barnseenio | london |
| 21:16.50 | barnseenio | err, -0 |
| 21:16.52 | barnseenio | i guess |
| 21:16.57 | [g2] | sure |
| 21:17.07 | barnseenio | i'll leave this irssi going on the slug though |
| 21:17.08 | [g2] | I'll look for you in your AM |
| 21:17.19 | [g2] | yeah IRC is 24/7 |
| 21:17.20 | barnseenio | so you can post in here or query and i'll see it |
| 21:17.42 | barnseenio | [g2]: your the friendliest person i ever met on irc |
| 21:17.42 | [g2] | nod |
| 21:18.16 | [g2] | barnseenio quite taking the piss outta me |
| 21:18.23 | [g2] | quit |
| 21:18.24 | barnseenio | lol, no |
| 21:18.32 | barnseenio | i wasnt! |
| 21:18.38 | [g2] | sure |
| 21:18.46 | barnseenio | seriously! |
| 21:18.48 | [g2] | cheers mate |
| 21:19.07 | barnseenio | k tc |
| 21:19.09 | barnseenio | and thanks again |
| 21:19.11 | [g2] | thx |
| 21:20.15 | *** join/#nslu2-linux bullet (n=bullet@84.58.62.81.cust.bluewin.ch) |
| 21:21.30 | rwhitby | barnseenio: we're all friendly in nslu2-linux |
| 21:21.42 | rwhitby | (most of the time :-) |
| 21:21.57 | rwhitby | but [g2] is the one who gives electronic hugs |
| 21:22.05 | barnseenio | heh, yeah its really nice |
| 21:28.22 | [g2] | we've got a great community esp. thx rwhitby dyoung dwery DaKa ByronT ka6sox and many more |
| 21:29.08 | eno | barnseenio: http://www.nslu2-linux.org/wiki/DebianSlug/UseDistCCWithCrossCompiler |
| 21:35.04 | rwhitby | ok, we have a new rule #1 at www.nslu2-linux.org |
| 21:37.40 | eno | the search on the left-hand-side of the wiki is broken |
| 21:37.49 | eno | it would be nice someone can fix it |
| 21:39.37 | rwhitby | What needs to be fixed? If it's a two minute job I can do it now, otherwise I need to catch a plane. |
| 21:41.46 | eno | i dunno what needs to be fixed. Type anything in the left search box and it's not working |
| 21:42.02 | rwhitby | I dunno how to fix it in twp minutes then |
| 22:00.25 | *** join/#nslu2-linux dyoung_ (n=dyoung@cpe-67-49-158-191.hawaii.res.rr.com) |
| 22:00.57 | *** join/#nslu2-linux mwester-laptop (n=chatzill@nslu2-linux/mwester) |
| 22:16.32 | CIA-8 | 03tbm * r39 10upslug2/trunk/upslug2.8: clarify that RedBoot/SysConf won't be changed, thanks mikishar2@yahoo.com |
| 22:39.32 | *** join/#nslu2-linux yvasilev (n=yvasilev@189.140.142.44) |
| 23:00.34 | *** join/#nslu2-linux mithro (n=tim@ppp246-117.static.internode.on.net) |
| 23:00.35 | *** join/#nslu2-linux ByronT (n=byron-po@nslu2-linux/ByronT) |
| 23:14.23 | *** join/#nslu2-linux mwester-laptop__ (n=chatzill@72-255-42-89.client.stsn.net) |
| 23:36.18 | joshin | Hmmm, I think that the new ethernet driver has a hard coded MAC address. Makes it hard to have 2 slugs... |
| 23:50.13 | [g2] | joshin where are you pulling from ? |
| 23:50.50 | joshin | It is a 10 day old build. Everything is stuck at 00:0C:BE:00:01:01. (The SVN is down as of 5 minutes ago) |
| 23:51.24 | [g2] | svn from this morning has the randomize patch in 2.1 |
| 23:51.26 | [g2] | 0.2.1 |
| 23:51.44 | [g2] | iirc r 491 ish |
| 23:51.46 | joshin | Cool, guess it is time to freshen my slugs. :) |