| 02:02.54 | *** join/#nslu2-linux mithro (n=tim@203.63.126.9) |
| 02:07.51 | *** join/#nslu2-linux jacques (n=username@nslu2-linux/jacques) |
| 02:08.52 | *** join/#nslu2-linux mithro (n=tim@203.63.126.9) |
| 02:12.59 | *** join/#nslu2-linux mithro (n=tim@203.63.126.9) |
| 03:32.28 | *** join/#nslu2-linux jacques_ (n=username@cpe-24-160-108-167.houston.res.rr.com) |
| 03:32.57 | *** join/#nslu2-linux mithro (n=tim@203.63.126.9) |
| 03:56.47 | *** join/#nslu2-linux jacques (n=username@user-0ccsi3e.cable.mindspring.com) |
| 04:01.13 | *** join/#nslu2-linux mithro (n=tim@203.63.126.9) |
| 04:38.01 | *** join/#nslu2-linux leon (n=leon@193.2.111.14) |
| 05:18.33 | *** join/#nslu2-linux DrZimmerman (n=theo@gw.ptr-80-238-140-246.customer.ch.netstream.com) |
| 05:29.37 | jacques | jbot, convert 105F to C |
| 05:29.51 | jacques | jbot, convert 105F to Celcius |
| 05:30.02 | jacques | jbot, convert 105F to Centigrade |
| 05:30.11 | jacques | jbot, convert 105F to Kelvin |
| 05:30.36 | jacques | jbot, convert 105 degrees F to C |
| 05:30.45 | jacques | jbot, convert 105 F to C |
| 05:30.57 | jacques | jbot, help convert |
| 05:31.21 | jacques | jbot, convert |
| 05:32.27 | jacques | jbot, convert 105 F to celcius |
| 05:32.42 | jacques | jbot, convert 105 F to celsius |
| 05:33.11 | jacques | jbot, you are a POS |
| 05:33.13 | jbot | I think you lost me on that one, jacques |
| 05:33.13 | jacques | a worthless POS |
| 06:09.20 | *** join/#nslu2-linux Neuer_User (n=michael@71.176.78.83.cust.bluewin.ch) |
| 06:57.12 | *** join/#nslu2-linux blomma (n=blomma@c-4d9b72d5.014-202-6e6b701.cust.bredbandsbolaget.se) |
| 07:14.28 | ilmari | jacques: convert tempF(105) to tempC |
| 07:14.36 | ilmari | jbot, convert tempF(105) to tempC |
| 07:15.06 | ilmari | jbot, convert 105°F to °C |
| 07:15.20 | ilmari | okay, its not a units(1) wrapper |
| 07:15.59 | ilmari | jacques: 105°F is 40.6°C |
| 07:26.26 | *** join/#nslu2-linux leon (n=leon@www.lecad.uni-lj.si) |
| 08:28.02 | *** join/#nslu2-linux marceln (n=marceln@pion.xs4all.nl) |
| 08:40.41 | *** join/#nslu2-linux kfm (i=kfm82@p54BED49D.dip.t-dialin.net) |
| 08:52.08 | *** join/#nslu2-linux rwhitby (n=rwhitby@nslu2-linux/rwhitby) |
| 09:09.17 | *** join/#nslu2-linux ByronT-Log (n=ByronT@nslu2-linux/ByronT) |
| 09:15.51 | *** join/#nslu2-linux rwhitby-away (n=rwhitby@nslu2-linux/rwhitby) |
| 09:46.00 | *** join/#nslu2-linux EvilDevil (n=evildevi@vpn-stud.rz-zw.fh-kl.de) |
| 10:18.39 | *** join/#nslu2-linux rwhitby (n=rwhitby@nslu2-linux/rwhitby) |
| 10:21.33 | marceln | Hi rwhitby |
| 10:21.48 | marceln | Do you know why cvs on sf isn't working. |
| 10:22.07 | marceln | I get a ssh connection refused and there ssh is down. |
| 10:22.13 | rwhitby | there is a site outage listed on the sf status page. hardware failure apparently |
| 10:24.06 | marceln | Thanks |
| 10:44.31 | *** join/#nslu2-linux marcel1 (n=marceln@pion.xs4all.nl) |
| 11:00.58 | *** join/#nslu2-linux bullet (n=bullet@133.51.76.83.cust.bluewin.ch) |
| 11:03.31 | *** join/#nslu2-linux marceln (n=marceln@pion.xs4all.nl) |
| 11:38.19 | *** join/#nslu2-linux Lacsi (n=lacsi@amazonas-897.adsl.datanet.hu) |
| 11:38.35 | Lacsi | hi |
| 11:39.53 | Lacsi | is there any way of controlling the leds of the nslu2 under unsunlg 5.5? i found info for openslug only |
| 11:59.53 | *** join/#nslu2-linux michael (n=michael@103.68.3.213.cust.bluewin.ch) |
| 12:29.41 | *** join/#nslu2-linux michael (n=michael@103.68.3.213.cust.bluewin.ch) |
| 13:03.02 | *** join/#nslu2-linux VoodooZ (n=VoodooZ@CPE0080c6f0dc89-CM000f9fac823a.cpe.net.cable.rogers.com) |
| 13:03.17 | *** join/#nslu2-linux kolla (n=kolla@158.38.58.45) |
| 13:41.43 | *** join/#nslu2-linux mithro (n=tim@ppp246-117.static.internode.on.net) |
| 13:55.56 | *** join/#nslu2-linux mwester (n=mwester@209.242.5.110) |
| 14:11.57 | *** join/#nslu2-linux mithro (n=tim@ppp246-117.static.internode.on.net) |
| 15:08.38 | *** join/#nslu2-linux mithro (n=tim@ppp246-117.static.internode.on.net) |
| 15:41.27 | *** join/#nslu2-linux ByronT (i=byron-po@nslu2-linux/ByronT) |
| 15:51.25 | *** join/#nslu2-linux kami22 (n=kami22@p5489630E.dip.t-dialin.net) |
| 16:13.48 | *** join/#nslu2-linux Lacsi- (i=joe7@ob-2458.adsl.datanet.hu) |
| 16:31.48 | *** join/#nslu2-linux dwery (n=dwery@nslu2-linux/dwery) |
| 16:32.31 | *** join/#nslu2-linux EvilDevil (n=evildevi@p54A6E854.dip.t-dialin.net) |
| 17:15.24 | *** join/#nslu2-linux evildevil (n=evildevi@p54A6E854.dip.t-dialin.net) |
| 17:20.08 | evildevil | hi, i'm trying to connect a cell phone to usb cable (pl2303) to the internal serial port of my nslu2. i'm not sure about the pins coming from the usb cable... is it safe to just try to connect them to the serial port an see if there's something useful through the cable? or could i damage my nslu2? |
| 17:20.59 | dwery | evildevil: you cannot connect an usb cable to the serial port.. |
| 17:22.19 | ByronT | the pl2303 is the usb-serial connector that I've used in the past... but the phone side of the cable is connected to the internal serial port |
| 17:22.36 | ByronT | so I'm not sure where you would plug in the phone |
| 17:23.09 | evildevil | uhmm.. i just wanted to add a serial port as described on the wiki |
| 17:23.35 | ByronT | so how do you plug a phone into that? |
| 17:23.54 | evildevil | i want to connect the cell phone side of the usb-to-cell phone cable to the internal serial port and the usb side into my pc :) |
| 17:24.13 | evildevil | i think i was explaining it wrong ... |
| 17:24.40 | ByronT | ah, ok (yes the explanation was a little funky) |
| 17:25.03 | evildevil | like NSLU2 internal Serial Port <----- PL2303 -----< USB <--- PC |
| 17:25.35 | ByronT | since pl2303 cables (phone side) can differ, I've always used a PL2303 reference sheet to determine which pins go where |
| 17:26.09 | evildevil | okay.. i'll try that.. i think i saw the url for the datasheet somewhere around :) |
| 17:26.28 | ByronT | http://www.nslu2-linux.org/wiki/HowTo/AddASerialPort <- that shows the pin out of J2 |
| 17:26.39 | ByronT | Pin 1 is *not* used |
| 17:27.11 | ByronT | RXD of J2 plugs into Tx of the PL-2303, TXD of J2 plugs intos Rx of the PL-2303, etc.... |
| 17:27.37 | evildevil | thanks ByronT :) |
| 17:27.44 | ByronT | http://www.prolific.com.tw/eng/downloads.asp?ID=23 |
| 17:27.48 | *** join/#nslu2-linux eFfeM-log (n=eFfeM@ip545787f8.direct-adsl.nl) |
| 17:30.18 | evildevil | so, i'm going to need Pin 5 (RXD), Pin 1 (TXD) and Pin 7 or 21 (GND) |
| 17:30.46 | ByronT | just find out what pads on the dongles are connected to those pins |
| 17:31.12 | *** join/#nslu2-linux Lacsi (n=lacsi@ob-1962.adsl.datanet.hu) |
| 17:31.39 | evildevil | using a multimeter, this would mean, that the resistance is 0 ohm, right? |
| 17:31.52 | ByronT | last time I checked..... ;) |
| 17:33.22 | *** join/#nslu2-linux sbellina (n=chatzill@216.180.36.163) |
| 17:40.30 | evildevil | okay, i finally got it :) |
| 17:41.00 | evildevil | thanks again, ByronT |
| 17:42.40 | ByronT | np |
| 17:43.32 | *** join/#nslu2-linux pepijn (n=pepijn@195.159.157.158) |
| 17:46.39 | *** join/#nslu2-linux VoodooZ (n=VoodooZ@CPE0080c6f0dc89-CM000f9fac823a.cpe.net.cable.rogers.com) |
| 17:48.25 | *** join/#nslu2-linux ecopperbe (n=copperbe@82-40-186-72.cable.ubr04.newm.blueyonder.co.uk) |
| 17:53.57 | *** join/#nslu2-linux caplink811-log (n=caplink8@dslb-088-073-119-027.pools.arcor-ip.net) |
| 17:58.44 | *** join/#nslu2-linux Sinclair73de (n=icechat5@p54A0BB7C.dip0.t-ipconnect.de) |
| 18:11.04 | *** join/#nslu2-linux [cc]smart (n=[cc]smar@gw.ptr-62-65-142-223.customer.ch.netstream.com) |
| 18:12.01 | evildevil | hmmm.. i connected the pl2303 cable to the nslu2 and to my pc. how do i see if it works? i just started picocom -b 115200 /dev/ttyUSB0 (as suggested on the wiki), and booted the slug, but nothing happens :( |
| 18:13.37 | evildevil | ByronT, RXD on the PL2303 = RXD (Pin 2) on the slug or is it vice-verse? |
| 18:17.28 | *** join/#nslu2-linux AdamBaker (n=aab@userch028.dsl.pipex.com) |
| 18:27.33 | ByronT | rxd on the PL-2303 = Tx on the slug |
| 18:27.49 | evildevil | damn... RXD on PL2303 = TX on the slug.. just changed the wires :) |
| 18:28.15 | ByronT | the PL-2303 receives what the slug transmits (and transmits for the slug to receive) |
| 18:29.13 | evildevil | <PROTECTED> |
| 18:29.53 | evildevil | well. it's working now :) |
| 18:53.15 | *** join/#nslu2-linux caplink811-log (n=caplink8@dslb-088-073-123-239.pools.arcor-ip.net) |
| 19:52.18 | *** join/#nslu2-linux ByronT (i=byron-po@nslu2-linux/ByronT) |
| 20:02.12 | *** part/#nslu2-linux marceln-away (n=marceln@pion.xs4all.nl) |
| 20:38.50 | *** join/#nslu2-linux ecopperbe (n=copperbe@82-40-186-72.cable.ubr04.newm.blueyonder.co.uk) |
| 20:38.54 | *** join/#nslu2-linux copperbeech (n=copperbe@82-40-186-72.cable.ubr04.newm.blueyonder.co.uk) |
| 20:51.26 | *** join/#nslu2-linux mucsleber (n=scum@84.13.51.232) |
| 20:52.19 | *** join/#nslu2-linux Monteverde (n=frederic@84-246-89-144.rev.sth.ownit.se) |
| 21:01.21 | Monteverde | Any news on the Unslung 6.x beta? How far away is it? |
| 21:06.03 | mwester | No word. Source & binary are in the release process, we await the arrival of the downloadable binary on the web site at this point. |
| 21:06.39 | mwester | I was hoping it would be out this past weekend, actually. |
| 21:09.13 | Monteverde | ok, looking good |
| 21:20.32 | ByronT | mwester, sorry about that |
| 21:20.49 | ByronT | funeral and sickliness in my household this past weekend |
| 21:32.20 | *** part/#nslu2-linux Monteverde (n=frederic@84-246-89-144.rev.sth.ownit.se) |
| 21:37.20 | *** part/#nslu2-linux Sinclair73de (n=icechat5@p54A0BB7C.dip0.t-ipconnect.de) |
| 21:39.31 | *** join/#nslu2-linux philpem (n=philpem@81-86-139-157.dsl.pipex.com) |
| 21:51.38 | *** join/#nslu2-linux _shawn (n=chatzill@216.180.36.163) |
| 22:22.46 | *** join/#nslu2-linux VoodooZ_Home (n=chatzill@CPE0080c6f0dc89-CM000f9fac823a.cpe.net.cable.rogers.com) |