| 00:01.30 | *** join/#nslu2-linux malfimalfi (n=malte@dslb-088-073-005-220.pools.arcor-ip.net) |
| 00:45.50 | *** join/#nslu2-linux yvasilev (n=yvasilev@201.137.142.98) |
| 01:07.15 | *** join/#nslu2-linux mwester_ (n=chatzill@209.242.5.110) |
| 04:10.49 | *** join/#nslu2-linux jacques (n=username@nslu2-linux/jacques) |
| 04:57.46 | *** join/#nslu2-linux kfm (i=kfm82@p54BEE283.dip.t-dialin.net) |
| 05:55.14 | *** join/#nslu2-linux mithro (n=tim@lester.mithis.com) |
| 06:17.37 | *** join/#nslu2-linux DrZimmerman (n=theo@84-72-117-235.dclient.hispeed.ch) |
| 07:30.06 | *** join/#nslu2-linux neongrau (n=neongrau@p54A9090C.dip0.t-ipconnect.de) |
| 07:57.00 | *** join/#nslu2-linux philpem (n=philpem@81-86-139-157.dsl.pipex.com) |
| 08:18.00 | *** join/#nslu2-linux Jah_ (n=Jah_@125.25.130.165) |
| 08:50.17 | *** join/#nslu2-linux llagendijk (n=louis@lagendijk.xs4all.nl) |
| 09:59.10 | *** join/#nslu2-linux marceln (n=marceln@pion.xs4all.nl) |
| 10:06.33 | *** join/#nslu2-linux EvilDevil (n=evildevi@p54A6DFEA.dip.t-dialin.net) |
| 10:19.40 | *** join/#nslu2-linux malfimalfi (n=malte@dslb-088-073-005-220.pools.arcor-ip.net) |
| 10:56.31 | *** join/#nslu2-linux rwhitby (n=rwhitby@nslu2-linux/rwhitby) |
| 11:33.05 | *** join/#nslu2-linux pepijn (n=pepijn@195.159.157.158) |
| 11:43.40 | *** join/#nslu2-linux kami22 (n=kami22@p5489580C.dip.t-dialin.net) |
| 12:38.46 | *** join/#nslu2-linux kami22 (n=kami22@p5489580C.dip.t-dialin.net) |
| 13:12.12 | dwery | NAiL: ping |
| 13:13.06 | NAiL | pong |
| 13:13.30 | dwery | do you have some time to test the cvs? |
| 13:13.37 | NAiL | sure |
| 13:13.43 | dwery | ok |
| 13:13.58 | dwery | I think the ide patch needs to be updated |
| 13:15.06 | NAiL | you saw my attempts to build with the makefile? |
| 13:15.23 | dwery | yes |
| 13:15.59 | dwery | ok, I'm uploading the new libata/pata |
| 13:17.00 | CIA-8 | 03azummo * 10kernel/2.6.16/patch-2.6.16-rc6-ide1: Added patch-2.6.16-rc6-ide1 |
| 13:17.47 | NAiL | which -git are you using? |
| 13:17.53 | dwery | actually, git1 |
| 13:18.04 | dwery | can you change your series |
| 13:18.09 | dwery | to use the new ide patch |
| 13:18.14 | dwery | and see if it applies correctly? |
| 13:18.58 | NAiL | trying now |
| 13:19.08 | NAiL | trying with git1 first |
| 13:19.21 | dwery | ok |
| 13:22.10 | NAiL | leds and nas100d-stuff still fails to apply |
| 13:22.14 | dwery | ok |
| 13:22.27 | dwery | can you please post the relevant lines? |
| 13:23.10 | NAiL | http://pastebin.com/608986 |
| 13:23.58 | dwery | you're using quilt, right? |
| 13:25.24 | NAiL | I don't think the makefile uses quilt |
| 13:25.30 | dwery | mmm |
| 13:25.52 | dwery | because include/linux/leds.h is generated by leds-class.patch |
| 13:26.00 | dwery | so it is strange that it doesn't apply |
| 13:29.24 | NAiL | bbiaw, need to lie down |
| 13:29.42 | dwery | w? |
| 13:49.28 | NAiL | flu |
| 13:50.35 | dwery | oh! |
| 13:50.40 | dwery | didn't know |
| 13:51.14 | dwery | sleep well |
| 13:51.36 | NAiL | Nah, I'm not sleeping, just lying down once in a while |
| 13:51.53 | dwery | sleep! |
| 13:51.55 | dwery | :-D |
| 13:52.07 | NAiL | yeah, I should. But I can't right now. |
| 14:14.33 | dwery | dyoung-zzzz: ping |
| 14:17.10 | dyoung-zzzz | dwery: lemme get back to you in around 8hrs when I wake up. |
| 14:17.20 | dwery | ok, don't worry :) |
| 14:17.33 | dwery | Just wanted to tell that serial works |
| 14:17.40 | dyoung-zzzz | cool! |
| 14:17.47 | dwery | tftp does not however :( |
| 14:18.06 | dyoung-zzzz | Oh yeah, redboot is braindamaged there. |
| 14:18.11 | dyoung-zzzz | you gotta xmodem the stuffs in |
| 14:18.35 | NAiL | ymodem is *slightly* faster :-D |
| 14:18.48 | dwery | will do. we'll need to find a good redoot to use as second stage bootloader |
| 14:19.03 | NAiL | s/redoot/apex/ ? ;) |
| 14:19.17 | dyoung-zzzz | Or make dsmboot :-) |
| 14:19.28 | dwery | wait wait? dsmboot? |
| 14:19.44 | dyoung-zzzz | sorta like ludeboot |
| 14:19.52 | dyoung-zzzz | except with the cicada bits in there. |
| 14:19.54 | dwery | it exists already? |
| 14:20.15 | dyoung-zzzz | no, dsmboot is only a figment of my imagination atm. :-) |
| 14:20.30 | dwery | ok, better you got to sleep or your immagination will cause some damage :) |
| 14:20.40 | dyoung-zzzz | nighty. |
| 14:20.46 | dwery | night! |
| 14:20.52 | dwery | NAiL: does apex support via eth? |
| 14:26.38 | dwery | no :( |
| 14:32.34 | dwery | [g2]: ping |
| 14:52.42 | *** join/#nslu2-linux mwester_ (n=chatzill@209.242.5.110) |
| 14:55.19 | *** join/#nslu2-linux EvilDevil (n=evildevi@p54A6DFEA.dip.t-dialin.net) |
| 15:04.01 | *** join/#nslu2-linux Sinclair73de (n=icechat5@p54A099B6.dip0.t-ipconnect.de) |
| 15:04.38 | *** join/#nslu2-linux bullet (n=bullet@125.221.62.81.cust.bluewin.ch) |
| 15:37.14 | *** join/#nslu2-linux eFfeM-log (n=eFfeM@ip545787f8.direct-adsl.nl) |
| 15:56.56 | *** join/#nslu2-linux eddyp (n=eddyp@86.123.244.140) |
| 15:57.01 | eddyp | when I want to install a new image through the web interface I am not presented with a "Start Upgrade" button in the upgrade page, only "Enter Upgrade Mode". How can I flash the new image? |
| 16:12.36 | EvilDevil | i'm not sure. maybe you have to use the Sercomm Upgrade Utility |
| 16:12.59 | eddyp | I used the upslug2 utility |
| 16:13.16 | eddyp | but now I can't find it on the network |
| 16:13.19 | eddyp | :-/ |
| 16:13.53 | *** join/#nslu2-linux AdamBaker (n=aab@userch028.dsl.pipex.com) |
| 16:14.17 | EvilDevil | did upslug complain about a bad flash? |
| 16:14.28 | eFfeM | eddyp: what version are you running? |
| 16:15.25 | eddyp | no, it did not |
| 16:15.31 | eddyp | I want to install Debian |
| 16:15.51 | eddyp | following tbm's instructions |
| 16:15.51 | EvilDevil | there might be a problem with the slug getting it's ip address. |
| 16:16.20 | eddyp | It was configured as 192.168.1.254 before the flashing |
| 16:16.27 | eFfeM | yeah, but what do you have now: linksys kernel? unslung? openslug? which version ? |
| 16:16.47 | EvilDevil | make sure the slug is connected to a dhcp server and try to read the dhcp server's lease table |
| 16:16.59 | eddyp | eFfeM: it was unslung, now it should be the d-i image |
| 16:17.23 | eFfeM | if you get an enter upgrade mode msg in your browser when surfing to the device it is definitely up and running and responding to its address |
| 16:17.23 | eddyp | hmm the status led is yellow |
| 16:18.02 | eFfeM | yellow means it is still running startup scripts |
| 16:18.14 | eFfeM | can you ping it? |
| 16:19.48 | eddyp | no :( |
| 16:20.16 | eFfeM | but you got this "enter upgrade mode" msg when accessing it in your browser? |
| 16:20.31 | eddyp | it was before flashing |
| 16:20.35 | eFfeM | ah, ok |
| 16:20.42 | eFfeM | led is steady yellow ? |
| 16:20.54 | eddyp | yes |
| 16:21.00 | eddyp | network is green |
| 16:21.09 | eFfeM | network is always green |
| 16:21.17 | eFfeM | is a hard disk connected? |
| 16:21.24 | eFfeM | or stick? |
| 16:21.28 | eddyp | do I have to do the "catch the redboot" game? |
| 16:21.36 | eddyp | eFfeM now, yes |
| 16:21.41 | *** join/#nslu2-linux Jah__ (n=Jah_@61.47.116.203) |
| 16:21.47 | eddyp | hdd connected |
| 16:21.55 | NAiL | catching redboot is simple if you have a linux-box |
| 16:22.01 | eFfeM | maybe, I would suggest to remove all usb devices then reboot and see what happens |
| 16:22.10 | eddyp | ok, will try |
| 16:22.16 | eFfeM | catch redboot can still be done |
| 16:22.48 | eFfeM | i've been told that pressing reset for 5 seconds will also get you in upgrade mode, but I never managed to get that done reliably; I always use redboot |
| 16:23.12 | NAiL | arping -f <redboot-ip> && telnet <redboot-ip> |
| 16:23.14 | *** join/#nslu2-linux kami22 (n=kami22@p5489580C.dip.t-dialin.net) |
| 16:23.20 | NAiL | That should do the telnet-into-redboot-trick |
| 16:23.32 | NAiL | I rarely use it, since I've got my slugs serialized |
| 16:23.46 | NAiL | (and not all of my slugs have redboot ;) |
| 16:24.16 | NAiL | arping -f <redboot-ip> && telnet <redboot-ip> 9000, actually |
| 16:25.13 | eFfeM | yup, i also always use the arping trick |
| 16:25.16 | eFfeM | btw hello NAiL |
| 16:25.22 | NAiL | hello :) |
| 16:25.51 | eddyp | arping: invalid option -- f |
| 16:27.43 | eFfeM-away | (dinner) |
| 16:28.04 | NAiL | eddyp: what OS are you using? |
| 16:28.12 | eddyp | debian unstable |
| 16:28.22 | NAiL | arping --versiobn |
| 16:28.27 | NAiL | s/iobn/ion/ |
| 16:28.31 | eddyp | I am in redboot |
| 16:28.35 | eddyp | I used my trick |
| 16:28.40 | eddyp | ping -f |
| 16:28.49 | NAiL | ah |
| 16:28.53 | NAiL | good |
| 16:29.04 | AwayNAiL | bbl |
| 16:55.31 | eddyp | somebody fscked the RecoverFromABadFlash page |
| 16:55.39 | *** join/#nslu2-linux bullet (n=bullet@125.221.62.81.cust.bluewin.ch) |
| 16:56.08 | *** join/#nslu2-linux macsat (n=macsat@0x535b9779.arcnxx9.adsl-dhcp.tele.dk) |
| 17:14.26 | tbm | eddyp: what's up? |
| 17:16.33 | CIA-8 | 03bzhou * 10unslung/ (Makefile make/swi-prolog.mk): swi-prolog ready for testing, built with most swi-prolog packages |
| 17:28.14 | *** join/#nslu2-linux DrZimmerman (n=theo@84-72-117-235.dclient.hispeed.ch) |
| 17:33.08 | *** join/#nslu2-linux scumwork (n=scum@84.13.63.13) |
| 17:45.25 | lesbleus | anyone managed to get debootstrap working on nslu2 ? |
| 17:45.40 | lesbleus | mine fails at 68% |
| 17:49.01 | *** join/#nslu2-linux NSLU2-IRC (i=NSLU2Wik@c-24-218-6-118.hsd1.ma.comcast.net) |
| 17:57.56 | CIA-8 | 03azummo * 10kernel/2.6.16/ (10-ixp4xx-fix-irq.patch series): |
| 17:57.56 | CIA-8 | updated series for latest libata/pata patch, added ixp4xx |
| 17:57.56 | CIA-8 | irq fixup (this fixes eth and ide on dsmg600) |
| 18:23.13 | *** join/#nslu2-linux eFfeM-log (n=eFfeM@ip545787f8.direct-adsl.nl) |
| 18:29.44 | *** part/#nslu2-linux Sinclair73de (n=icechat5@p54A099B6.dip0.t-ipconnect.de) |
| 19:26.23 | eddyp | tbm: I can't see the NSLu after flashing it with the di image |
| 19:26.41 | tbm | eddyp: define "cannot see" |
| 19:27.19 | eddyp | tbm: it was configured as 192.168.... Yeah! |
| 19:27.21 | eddyp | found it |
| 19:27.30 | eddyp | thanks nmap |
| 19:27.48 | tbm | are you running a dhcp server? |
| 19:27.51 | eddyp | tbm: it took a dhcp address |
| 19:28.13 | eddyp | from my router (actually a Mac OSX laptop) |
| 19:28.22 | tbm | right. was this not expected? was the firmware configured to have a static ip? |
| 19:28.49 | eddyp | tbm: the unslung that was configured before had 192.168.1.254 |
| 19:28.53 | eddyp | static |
| 19:30.19 | pepijn | did you run 'turnup preserve' after configuration ? |
| 19:30.22 | tbm | can you give me a dump of /dev/mtd<something. (look for SysConf in /proc/mtd for the number) |
| 19:30.53 | eddyp | I could if I could log in :-/ |
| 19:30.55 | pepijn | when i ran d-i i had similar problems and it turned out the SysConf had old values |
| 19:31.01 | tbm | oh, _unslung_ was configured that way. how is unslung configured? Does it use SysCof or something else? |
| 19:31.20 | tbm | eddyp: cannot you restart the machine and run a proper dhcp server? |
| 19:31.51 | pepijn | eddyp: give ssh some time (up to a few minutes) |
| 19:31.59 | eddyp | tbm: if I unplug it from the network, it should start with the static ip, right? |
| 19:32.04 | *** join/#nslu2-linux lesbleus (n=scum@84.13.45.147) |
| 19:32.17 | eddyp | pepijn: it's running |
| 19:32.22 | lesbleus | evening all |
| 19:32.28 | tbm | eddyp: d-i, yes. with 192.168.1.something |
| 19:32.31 | eddyp | it says perm denied |
| 19:32.45 | tbm | is this d-i or after d-i? |
| 19:32.50 | eddyp | d-i |
| 19:33.02 | eddyp | installer:install does not work |
| 19:33.07 | eddyp | I'll reboot |
| 19:33.10 | tbm | perm denied? do you use installer@<ip> passwd install? |
| 19:33.11 | tbm | ok |
| 19:33.25 | tbm | but I'd like to know how unslung stores its IP address |
| 19:33.51 | NAiL | in sysconf |
| 19:33.53 | eddyp | tbm:AFAIK in the flash |
| 19:34.43 | eddyp | how fast should d-i start? |
| 19:34.59 | eddyp | after reboot? |
| 19:35.40 | tbm | ~4 minutes, maybe 5 |
| 19:37.12 | pepijn | yes, same experience here |
| 19:37.21 | pepijn | it needs to generate the host keys, takes time |
| 19:38.03 | eddyp | this is a turboslug ;-) |
| 19:38.08 | pepijn | tbm: guess you are waiting for the leds enabled kernel |
| 19:38.33 | eddyp | tbm: pepijn: rather building it ;-) |
| 19:38.47 | eddyp | s/building/working on/ |
| 19:40.01 | lesbleus | Has anyone here managed to get Debian installed using the new installer method ? |
| 19:40.36 | pepijn | lesbleus: i got it installed on a memory stick, but are actually running my original debootstrapped install |
| 19:41.32 | lesbleus | pepijn: did you go with stable, testing or unstable feed ? |
| 19:41.48 | pepijn | i started out with sarge and upgraded to etch |
| 19:42.03 | pepijn | stable vs. testing |
| 19:42.59 | lesbleus | I seem to get stuck at 68% downloading the initial system files |
| 19:43.36 | lesbleus | any pointers ? |
| 19:43.39 | pepijn | might be a known problem |
| 19:43.52 | eddyp | where the hell does Mac OSX keep its DHCPD logs? |
| 19:43.53 | pepijn | see mailing list |
| 19:44.08 | lesbleus | pepijn: will do, cheers |
| 19:44.47 | pepijn | and have a look at http://www.cyrius.com/debian/nslu2/ |
| 19:45.00 | tbm | lesbleus: http://groups.yahoo.com/group/nslu2-linux/message/11920 |
| 19:45.17 | pepijn | thnx, tbm ;) |
| 19:45.17 | tbm | should be fixed tonight |
| 19:45.22 | *** join/#nslu2-linux kolla (n=kolla@smurf.kolla.no) |
| 19:45.27 | lesbleus | I saw the 20030317 note about arm feed problem |
| 19:45.37 | eddyp | ssh installer@192.168.2.92 installer@192.168.2.92's password: Permission denied, please try again. |
| 19:45.45 | eddyp | tbm ^^^^ |
| 19:45.54 | lesbleus | cheers tbm |
| 19:45.59 | eddyp | it is again dhcp |
| 19:46.04 | eddyp | not static |
| 19:46.23 | tbm | so you didn't disconnect the ethernet cable? |
| 19:46.26 | lesbleus | yeah, that cron error looks familiar ;) |
| 19:46.27 | pepijn | eddyp: your sure it is the correct system? |
| 19:46.38 | pepijn | ;) |
| 19:46.59 | tbm | eddyp: oh, no |
| 19:47.10 | eddyp | pepijn: good point |
| 19:47.16 | tbm | eddyp: or you conigured the original firmware to do this static address |
| 19:47.37 | eddyp | there is another machine in the network |
| 19:47.40 | eddyp | :( |
| 19:47.42 | pepijn | hehe |
| 19:48.01 | eddyp | but then, where is the nslu? |
| 19:48.58 | tbm | 192.168.1.77? |
| 19:49.15 | eddyp | it should be .253 |
| 19:49.18 | lesbleus | that post is from Sat 18th, 01:13 am which is around when I was running into the problem, freaky timing |
| 19:49.19 | eddyp | but it is not |
| 19:49.38 | eddyp | I hate this lotery |
| 19:49.54 | pepijn | eddyp: boot to unslung and fix your SysConf |
| 19:50.00 | tbm | eddyp: if everything fails, flash the original firmware, configure the static IP address you want, double check, flash d-i again |
| 19:50.09 | tbm | or what pepijn says |
| 19:50.25 | eddyp | tbm: after the d-i starts, should the status light be yellow? |
| 19:50.42 | tbm | eddyp: there's no change in the status light |
| 19:50.52 | tbm | there's in LEDS support yet in the Debian kernel |
| 19:51.02 | eddyp | damn |
| 19:51.06 | tbm | eddyp: alternatively, wait a few days and I can give you an image that makes "beep" |
| 19:51.21 | pepijn | the image that goes 'beep' ? |
| 19:51.34 | pepijn | can't we get an image that goes 'ni' ? ;) |
| 19:51.59 | lesbleus | when you are done, you could install them in hospitals and charge a lot of money ! |
| 19:52.44 | [g2] | dwery pong |
| 20:02.50 | eddyp | address is 192.168.1.254 |
| 20:03.16 | eddyp | tbm: could it be something related to the fact that i placed the web interface to run on 8080? |
| 20:03.35 | eddyp | s/placed/made |
| 20:03.51 | tbm | eddyp: I've no idea, but if you give me a dump of your SysConf partition I can investigate |
| 20:04.26 | eddyp | sysconf being which? |
| 20:06.09 | *** join/#nslu2-linux snowbike (n=heavner@uas-al-197-37.jun.alaska.edu) |
| 20:06.25 | tbm | eddyp: /dev/mtd<something> /proc/mtd tells you the number |
| 20:07.03 | eddyp | crap, I can't telnet into it |
| 20:07.33 | eddyp | the port is open, but it just says Trying |
| 20:07.47 | eddyp | I don't understand |
| 20:08.58 | eddyp | oh, crap, is yet another network |
| 20:09.25 | eddyp | oh, di might have worked |
| 20:09.34 | pepijn | rofl |
| 20:09.45 | eddyp | but I was trying from the wrong terminal window |
| 20:10.13 | eddyp | I have this MacOSX machine disruptig everything |
| 20:27.30 | pepijn | cat /proc/mtd |
| 20:27.30 | pepijn | dev: size erasesize name |
| 20:27.30 | pepijn | mtd0: 00040000 00020000 "RedBoot" |
| 20:27.31 | pepijn | mtd1: 00020000 00020000 "SysConf" |
| 20:27.31 | pepijn | mtd2: 00100000 00020000 "Kernel" |
| 20:27.33 | pepijn | mtd3: 00020000 00020000 "Ramdisk" |
| 20:27.35 | pepijn | mtd4: 00660000 00020000 "Flashdisk" |
| 20:27.37 | pepijn | mtd5: 00020000 00020000 "FIS directory" |
| 20:56.52 | *** join/#nslu2-linux AdamBaker (n=aab@userch028.dsl.pipex.com) |
| 20:56.58 | *** part/#nslu2-linux AdamBaker (n=aab@userch028.dsl.pipex.com) |
| 21:00.49 | tbm | eddyp: so it works now? |
| 21:04.39 | *** join/#nslu2-linux disgg (n=abc@135-5-124-83.dsl.3u.net) |
| 21:07.06 | eddyp | tbm: no :( |
| 21:07.17 | eddyp | I don't know what's going on |
| 21:07.35 | eddyp | I have a severe head ache, I will try again tomorrow |
| 21:09.02 | *** join/#nslu2-linux apu (n=abc@135-5-124-83.dsl.3u.net) |
| 21:12.11 | *** join/#nslu2-linux deesk (n=abc@135-5-124-83.dsl.3u.net) |
| 21:16.24 | NAiL | thank you, come again :-P |
| 21:22.02 | eddyp | it was not the wrong net |
| 21:22.24 | eddyp | I was inserting the commands in the correct terminal |
| 21:22.43 | eddyp | (been looking over the older commands) |
| 21:44.25 | *** join/#nslu2-linux AdamBaker (n=aab@userch028.dsl.pipex.com) |
| 21:48.42 | *** join/#nslu2-linux rwhitby (n=rwhitby@nslu2-linux/rwhitby) |
| 21:48.42 | *** join/#nslu2-linux Eiffel_ (n=x@p5486A265.dip0.t-ipconnect.de) |
| 22:07.10 | *** join/#nslu2-linux jacques (n=username@cpe-24-160-108-167.houston.res.rr.com) |
| 23:01.15 | CIA-8 | 03rwhitby * 10kernel/2.6.16/ (4 files): Fixed breakage on multiple patches, and updated the defconfig and series files. |
| 23:06.05 | *** join/#nslu2-linux drif (n=drif@82-203-145-25.dsl.gohome.fi) |
| 23:16.50 | lesbleus | ? |
| 23:28.35 | rwhitby | lesbleus: kernel/2.6.16 is the cvs repository where we stage new kernel patches before putting them in OE. |
| 23:29.00 | rwhitby | an update to the latest -git broke some patches, but it's now fixed. |
| 23:29.04 | *** join/#nslu2-linux Lawnmower (n=Lawnmowe@mowbot.xs4all.nl) |
| 23:29.14 | lesbleus | i see |
| 23:29.28 | lesbleus | im waiting on debian cron problem to be fixed ;p |
| 23:56.53 | lesbleus | looks like theres a new package uploaded onto the mirrors |
| 23:57.07 | lesbleus | I symlinked it to old one and the install seems to be working |
| 23:57.08 | lesbleus | now |
| 23:59.14 | tbm | yeah, I uploaded a fix yesterday; should go into testing tonight |