| 00:00.11 | drif | what could be consuming my memory? only 880kB using Unslung 5.5 Beta |
| 00:02.41 | rwhitby-web | drif: what is the output of "free" ? |
| 00:03.30 | drif | Mem: 31252480 30351360 901120 0 1126400 21991424 |
| 00:03.30 | drif | Swap: 57569280 4050944 53518336 |
| 00:03.30 | drif | MemTotal: 30520 kB |
| 00:03.30 | drif | MemFree: 880 kB |
| 00:04.07 | drif | ah sorry, pasted /proc/meminfo |
| 00:04.14 | drif | too late I guess ;P |
| 00:04.30 | rwhitby-web | paste in free anyway |
| 00:04.33 | drif | <PROTECTED> |
| 00:04.33 | drif | <PROTECTED> |
| 00:04.33 | drif | <PROTECTED> |
| 00:04.33 | drif | Total: 86740 33860 52880 |
| 00:04.57 | rwhitby-web | are you unslung to a disk yet ? |
| 00:05.01 | drif | yes |
| 00:05.11 | drif | that's what bothering me |
| 00:05.23 | rwhitby-web | are you sure you're unslung ? |
| 00:05.34 | drif | is this correct? |
| 00:05.36 | drif | Filesystem 1k-blocks Used Available Use% Mounted on |
| 00:05.36 | drif | rootfs 195843204 2320812 191532744 1% / |
| 00:05.36 | drif | /dev/sda1 6528 5312 1216 81% /initrd |
| 00:05.36 | drif | /dev/sda1 195843204 2320812 191532744 1% / |
| 00:05.39 | drif | /dev/sda1 195843204 2320812 191532744 1% /share/hdd/data |
| 00:05.41 | drif | /dev/sda2 116661 4145 111312 4% /share/hdd/conf |
| 00:05.53 | rwhitby-web | yep, that's correct. |
| 00:06.29 | rwhitby-web | paste the output of "ps -ef" to pastebin.ca (not here) |
| 00:08.41 | drif | never used, should I use details or just submit? |
| 00:09.20 | rwhitby-web | just paste it in and submit. set expiry if you don't want it to be in Google forever. |
| 00:09.44 | drif | http://pastebin.ca/34545 |
| 00:09.46 | drif | set 1hour |
| 00:09.52 | drif | in case you were busy :P |
| 00:12.32 | rwhitby-web | don't see anything unusual there |
| 00:15.10 | AdamBaker | Could it just be that /bin/free doesn't report how much has been allocated as buffers |
| 00:15.28 | drif | how about /proc/meminfo? |
| 00:15.54 | drif | ah, forget that last one then |
| 00:16.29 | drif | is it usual that after installing openssh bootup really slows down.. |
| 00:16.33 | drif | takes minutes |
| 00:17.39 | drif | or should I use dropbear |
| 00:17.59 | rwhitby-web | the first boot takes a long time cause it has to generate the keys. after that there is no difference |
| 00:18.19 | rwhitby-web | you should use openssh - it's faster. |
| 00:19.01 | drif | ah, I love this device :P it seemed to have solved my probs with my dreambox |
| 00:21.20 | drif | one more question, is there any afraid on getting defragmentions when my OS files uses same partition as my data storage :-\ and there's going to be traffic there |
| 00:24.08 | rwhitby-web | it's ext3, so the question is moot I think. |
| 00:30.06 | *** join/#nslu2-linux yvasilev (n=yvasilev@201.152.92.165) |
| 00:30.36 | drif | took 5 minutes again to boot :-\ |
| 00:33.37 | AdamBaker | I couldn't find anything suitable ready made that didn't rely on PAM so I've just knocked together a program to let you lock a terminal until you type your password (intended so if I've got an ssh tunnel set up I can lock the associated terminal session while I don't need it and unlock it if I do). Is this something that others might find useful |
| 00:33.47 | AdamBaker | If so I'll make an optware package |
| 00:34.39 | AdamBaker | It assumes a working getpwent that uses the old DES passwords as unslung does - not sure what other platforms that is true for |
| 00:39.53 | rwhitby-web | should be true for all of the optware platforms |
| 00:49.28 | *** join/#nslu2-linux beewoolie-afk (n=beewooli@206.124.142.26) |
| 01:26.53 | *** part/#nslu2-linux n7ipb (n=n7ipb@254.sub-70-218-108.myvzw.com) |
| 05:16.31 | *** join/#nslu2-linux CIA-16 (n=CIA@flapjack.navi.cx) |
| 05:29.51 | drif | anyone around? |
| 05:33.52 | rwhitby-web | ya |
| 05:33.58 | drif | hi |
| 05:34.26 | drif | is there a way around that ncurses/busybox problem? |
| 05:34.34 | drif | I'd like to have ncftp on my slug |
| 05:35.04 | rwhitby-web | what ncurses/busybox problem? |
| 05:35.14 | drif | An error ocurred, return value: 2. |
| 05:35.14 | drif | Collected errors: |
| 05:35.14 | drif | Package ncurses wants to install file /opt/bin/clear |
| 05:35.14 | drif | <PROTECTED> |
| 05:35.14 | drif | Package ncurses wants to install file /opt/bin/reset |
| 05:35.16 | drif | <PROTECTED> |
| 05:35.28 | rwhitby-web | don't install busybox. |
| 05:36.00 | drif | I thought it was default |
| 05:36.22 | rwhitby-web | nope, that's complaining about a busybox package that you've installed |
| 05:36.55 | rwhitby-web | busybox is for small flash filesystems. You've got a big hard disk (or flash disk) attached. Install the proper versions of the tools instead of busybox. |
| 05:37.21 | drif | I've only updated it |
| 05:37.33 | drif | not installed it initially |
| 05:37.49 | drif | anyway, how should I remove/replace it |
| 05:38.01 | rwhitby-web | ipkg remove busybo |
| 05:38.03 | rwhitby-web | x |
| 05:38.58 | drif | and install bash then? |
| 05:39.16 | rwhitby-web | bash and busybox are orthogonal |
| 05:39.36 | rwhitby-web | you are removing the busybox from /opt/..., not the stock busybox in /usr/... |
| 05:41.15 | drif | so I can safely reboot after removing? or do I need to |
| 05:42.01 | drif | hm, now it says BusyBox v0.60.4 when I logged again |
| 05:42.19 | drif | before it was BusyBox v1.00 |
| 05:42.38 | drif | haven't booted though |
| 05:45.22 | rwhitby-web | stock busybox is 0.60.4 |
| 05:45.26 | rwhitby-web | the one you had installed was 1.0.0 |
| 05:45.33 | drif | yes |
| 05:45.38 | rwhitby-web | 1.00 is not required |
| 05:45.48 | rwhitby-web | (i never install it myself) |
| 05:46.22 | drif | I was just following puppy installation notes when I did that part |
| 05:46.41 | rwhitby-web | which URL? |
| 05:46.56 | rwhitby-web | busybox is not required for puppy |
| 05:47.09 | drif | http://www.nslu2-linux.org/wiki/Puppy/ConfiguringNSLU2 |
| 05:47.53 | drif | I did it because of this line "Upgrading the NSLU2 to handle large files and making new files accessible to everyone." |
| 05:47.54 | rwhitby-web | Hmm - this one doesn't mention BusyBox: http://www.nslu2-linux.org/wiki/Puppy/EndUserPuppyInstall |
| 05:49.13 | rwhitby-web | hmm - dunno about the large files bit. that might be true |
| 05:49.31 | drif | I will soon find out |
| 05:50.02 | rwhitby-web | I just use ftpd-topfield instead |
| 05:50.33 | drif | me too actually |
| 05:50.55 | drif | but it's not about puppy anyway - it's about ncurses and utils which require it |
| 05:51.38 | drif | how do I get rid of that busybox? |
| 05:56.04 | rwhitby-web | ipkg remove busybox |
| 05:56.17 | rwhitby-web | may need to ipkg remove busybox-links too |
| 05:56.21 | rwhitby-web | back later |
| 05:56.23 | *** part/#nslu2-linux rwhitby-web (n=c058a223@nslu2-linux/rwhitby) |
| 06:08.39 | *** join/#nslu2-linux cheefDaniel (n=Cheef-Da@p549A928B.dip0.t-ipconnect.de) |
| 06:10.35 | *** join/#nslu2-linux jacques (n=username@c-24-8-210-244.hsd1.co.comcast.net) |
| 06:16.29 | *** join/#nslu2-linux leon (n=leon@193.2.111.14) |
| 06:19.45 | *** join/#nslu2-linux jbot (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) |
| 06:19.45 | *** topic/#nslu2-linux is Developer (not end-user) discussion about modifying the Linux operating system on the Linksys NSLU2. Use #nslu2-general for end-user questions. See www.nslu2-linux.org for info, and be sure to read www.nslu2-linux.org/wiki/Main/FAQ before asking questions. |
| 06:20.00 | *** join/#nslu2-linux NAiLZzZ (n=repvik@nslu2-linux/pdpc.active.repvik) |
| 06:32.46 | jacques | jbot, status |
| 06:32.47 | jbot | Since Fri Dec 16 21:01:00 2005, there have been 68 modifications, 535 questions, 0 dunnos, 0 morons and 633 commands. I have been awake for 5d 9h 31m 46s this session, and currently reference 109921 factoids. I'm using about 18636 kB of memory. With 0 active forks. Process time user/system 15781.03/894 child 0.03/0.01 |
| 06:53.10 | *** join/#nslu2-linux odoc (i=odoc@is.borntobooze.de) |
| 06:54.52 | *** part/#nslu2-linux odoc (i=odoc@is.borntobooze.de) |
| 07:16.45 | *** join/#nslu2-linux mithro (n=tim@h219n2fls32o983.telia.com) |
| 07:25.29 | CIA-16 | 03rwhitby * 10debian/Makefile: Configured for little-endian native build. |
| 07:42.52 | CIA-16 | 03unslung * 10unslung/Makefile: clamav fails to build on wl500g. |
| 07:51.16 | CIA-16 | 03rwhitby 07org.openembedded.dev * r9bcfd71f... 10/conf/distro/ (3 files): slugos-packages: Added fetchmail |
| 07:52.26 | drif | rwhitby: something happened .. I wasn't able to login when hdd was attached |
| 07:52.51 | drif | it just replied to a ping - nothing else |
| 07:53.55 | drif | booted up without hdd fine - attached drive and reformatted it/unsling but same thing occures |
| 07:55.02 | drif | actually not even a ping reaches it |
| 08:08.44 | leon | for clamav I was using /opt/brcm/hndtools-mipsel-uclibc-3.2.3-full and it worked. Now I see that hndtools-mipsel-uclibc-0.9.19 fails on clamav :( My mistake. |
| 08:09.17 | *** join/#nslu2-linux MakMoer (n=makmoer@195.230.166.90) |
| 08:18.13 | rwhitby | leon: you could ask Oleg to update the version of uClibc in the firmware :-) |
| 08:20.52 | leon | yup. But I think that he is idling on firmware. I've sent him some patches for http_lanport, but he said to me he is busy at the moment (which last a while :( ) |
| 08:25.28 | rwhitby | any chance you can update the version of uclibc and rebuild the firmware ? |
| 08:25.48 | *** join/#nslu2-linux eno-away (n=eno@adsl-70-137-138-252.dsl.snfc21.sbcglobal.net) |
| 08:35.59 | leon | huh. I would love to. Now I'am not shure which toolchain I've used for my firmware build. And from where hndtools-mipsel-uclibc-3.2.3-full came from? Maybe from dd-wrt, openwrt? How can I check that on my router? Will build the firmware again to see the difference. |
| 08:36.05 | CIA-16 | 03rwhitby 07org.openembedded.dev * r5b756d69... 10/packages/meta/slugos-packages.bb: slugos-packages: Added fetchmail |
| 08:37.33 | rwhitby | leon: if you really want clamav, check out the openssh dn_expand.patch in optware/sources/openssh, and do the same thing for clamav to make it work for wl500g. |
| 08:43.12 | leon | rwhitby: My clamav works like a champ. Compiled, tested, run on several files, no viruses found htough. Compiled with hndtools-mipsel-uclibc-3.2.3-full as I said. Will take a look why this olg toolchain fails. My debian is a mess. Can not even compile the kernel for vmware. |
| 08:44.09 | rwhitby | Hmm - maybe the toolchain on our build machine needs updating then ... |
| 08:44.56 | rwhitby | the hndtools-mipsel-uclibc symlink on the build machine is pointing to 3.2.3-full |
| 08:45.25 | rwhitby | and that's what the optware Makefile calls ... |
| 08:46.23 | rwhitby | leon: where did you see it was using 0.9.19 ? |
| 08:47.38 | rwhitby | this is the error on the build machine: |
| 08:48.00 | rwhitby | "make[3]: Entering directory `/home/slug/optware/wl500g/builds/clamav/freshclam' |
| 08:48.00 | rwhitby | "/bin/sh ../libtool --mode=link /opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -g -O2 -L/home/slug/optware/wl500g/staging/opt/lib -Wl,-rpath,/opt/lib -Wl,-rpath-link,/home/slug/optware/wl500g/staging/opt/lib -lnsl -L/home/slug/optware/wl500g/staging/opt/lib -o freshclam output.o cfgparser.o getopt.o memory.o misc.o freshclam.o options.o manager.o notify.o dns.o execute.o ../libclamav/ |
| 08:48.00 | rwhitby | libclamav.la -lnsl |
| 08:48.00 | rwhitby | "/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -g -O2 -Wl,-rpath -Wl,/opt/lib -Wl,-rpath-link -Wl,/home/slug/optware/wl500g/staging/opt/lib -o .libs/freshclam output.o cfgparser.o getopt.o memory.o misc.o freshclam.o options.o manager.o notify.o dns.o execute.o -L/home/slug/optware/wl500g/staging/opt/lib ../libclamav/.libs/libclamav.so -lz -lbz2 -lpthread -lnsl -Wl,--rpath -Wl,/opt/lib |
| 08:48.05 | rwhitby | dns.o: In function `txtquery': |
| 08:48.07 | rwhitby | "/home/slug/optware/wl500g/builds/clamav/freshclam/dns.c:62: undefined reference to `__dn_expand' |
| 08:48.09 | rwhitby | "/home/slug/optware/wl500g/builds/clamav/freshclam/dns.c:77: undefined reference to `__dn_expand' |
| 08:48.11 | rwhitby | collect2: ld returned 1 exit status |
| 08:48.13 | rwhitby | make[3]: *** [freshclam] Error 1 |
| 08:48.31 | rwhitby | gcc version 3.2.3 with Broadcom modifications |
| 08:48.39 | rwhitby | so it's definitely using 3.2.3-full |
| 08:48.59 | leon | I've checked imedialely. Mine /opt/brcm has hndtools-mipsel-uclibc-0.9.19, hndtools-mipsel-uclibc-3.2.3, and hndtools-mipsel-uclibc-3.2.3-full. The later I was using all the way. OK. Wait for my screen too see. |
| 08:49.38 | rwhitby | I'm rebuilding from scratch on the build machine to confirm again |
| 08:49.43 | leon | leon@achilles:/opt/brcm$ ln -sf hndtools-mipsel-uclibc-3.2.3-full hndtools-mipsel-uclibc |
| 08:50.15 | rwhitby | yep, the error is fully repeatable on the build machine running 3.2.3-full |
| 08:52.57 | davidv | rwhitby: oops! what a terible mistook .. apologies :-) |
| 08:53.23 | rwhitby | davidv: that's ok - I don't mind NZers :-) |
| 08:53.24 | leon | After make clamav-dirclean && make clamav && make clamav-ipk I have this last line: Packaged contents of /local/leon/p/wl/slug/unslung/builds/clamav-0.87.1-ipk into /local/leon/p/wl/slug/unslung/builds/clamav_0.87.1-5_mipsel.ipk |
| 08:53.31 | davidv | rwhitby: are there many antipodeans here ? |
| 08:53.40 | rwhitby | davidv: not many |
| 08:54.58 | rwhitby | in fact, just you and I at the moment. jp30 is moving to NZ next year |
| 08:55.19 | rwhitby | leon: can you pastebin your build log, and I'll do the same ? |
| 08:57.24 | rwhitby | leon: http://pastebin.ca/34574 |
| 08:57.30 | leon | rwhitby: For uClibc I've saw this in grep uClibc Makefile |
| 08:57.30 | leon | UCLIBC=uClibc-0.9.19 |
| 08:57.30 | leon | $(ROOT)/uClibc: |
| 08:57.30 | leon | <PROTECTED> |
| 08:57.30 | leon | <PROTECTED> |
| 08:57.30 | leon | <PROTECTED> |
| 08:57.32 | leon | uClibc: $(ROOT)/uClibc |
| 08:58.14 | leon | this is from Oleg 6c-pre5 Makefile |
| 08:58.34 | rwhitby | aha! maybe we just need the latest Oleg uclibc libraries |
| 08:59.23 | rwhitby | did you download the 3.2.3-full from Oleg's site, or build your own ? |
| 09:00.00 | rwhitby | we got ours from http://wl500g.dyndns.org/uClibc-0.9.19/hndtools-mipsel-uclibc-3.2.3-full.tar.bz2 quite a while back |
| 09:00.33 | rwhitby | bbiab - leon, if we can get dn_expand working then quite a few wl500g packages will start to build. |
| 09:01.00 | rwhitby-away | leon: if you did build it yourself, can you put a tar file somewhere, and we will use that on the build machine. |
| 09:05.36 | *** join/#nslu2-linux pTweety (i=www@thor.66h.42h.de) |
| 09:08.33 | leon | rwhitby-away: http://pastebin.ca/34576 |
| 09:10.25 | leon | OKay for tar in a moment. |
| 09:18.02 | leon | rwhitby-away: my toolchain: http://www.wlan-sat.com/boleo/optware/hndtools-mipsel-uclibc-3.2.3-full-oleo.tar.bz2 |
| 09:30.21 | leon | rwhitby-away: This toolchain is not built by me. But I think that this came from oleg toolchain! Look up for uClibc-0.9.19-dn_expand.patch. uClibc was patched I assume; When Oleg firmware is built. And You are building packages without patches to uClibc. This is my guess. |
| 09:50.38 | rwhitby-away | leon: I will try and download Oleg's toolchain from the location I pasted again. Maybe he patched it recently without changing the version number. |
| 09:51.32 | rwhitby-away | I will also compare against your toolchain |
| 09:52.44 | leon | rwhitby-away: No. I think not. You should download sources from http://wl500g.dyndns.org/1.9.2.7-6c-pre5/ and then in broadcom/src/wl500g issue make uclibc |
| 09:53.06 | rwhitby-away | Is that what you did to build your toolchain? |
| 09:55.10 | leon | I thin so yes. Here is my script for building firmware: http://pastebin.ca/34583 |
| 09:56.36 | leon | s/uclibc/uClibc/ |
| 09:59.35 | CIA-16 | 03unslung * 10unslung/Makefile: Promoted clamav for wl500g - works now with latest uclibc toolchain. |
| 10:01.07 | CIA-16 | 03unslung * 10unslung/make/openssh.mk: Removed the dn_expand patch, as this should now be handled by the latest wl500g toolchain. |
| 10:01.45 | rwhitby-away | leon: success. |
| 10:09.50 | rwhitby-away | leon: if you find any other wl500g packages that build for you, please feel free to re-enable them. |
| 10:14.56 | leon | rwhitby-away: do you mean package like libstdc++ ? |
| 10:17.26 | rwhitby-away | anything that did not build with the old toolchain, but does build now with the new toolchain, like openssh and clamav |
| 10:20.26 | leon | rwhitby-away: I have troubles with mysql. Sometimes it buids, sometimes will not. Just kidding with libstdc++ :) |
| 10:21.48 | *** join/#nslu2-linux jcwunder (n=chris@ppp-82-135-8-162.mnet-online.de) |
| 10:42.27 | *** part/#nslu2-linux leon (n=leon@193.2.111.14) |
| 10:42.51 | *** join/#nslu2-linux leon (n=leon@193.2.111.14) |
| 13:31.47 | *** part/#nslu2-linux dwery-away (n=dwery@nslu2-linux/dwery) |
| 13:43.13 | *** join/#nslu2-linux Eiffel_ (n=x@p54869DED.dip0.t-ipconnect.de) |
| 14:07.24 | *** join/#nslu2-linux malfimalfi (n=malte@dslb-084-059-005-206.pools.arcor-ip.net) |
| 14:26.26 | *** join/#nslu2-linux djc12 (n=djc@203-206-98-194.dyn.iinet.net.au) |
| 14:26.33 | djc12 | i just thought of something else lol |
| 14:26.54 | djc12 | the "not found" error is probably because the gentoo bin/bash is dynamically linked |
| 14:27.18 | djc12 | because i can (after booting to flash) do chroot /media/hdd /bin/bash and get a nice gentoo bash prompt |
| 14:27.35 | djc12 | oh whoops am i in the wrong channel |
| 14:27.49 | djc12 | crap i think i was in nslu2-general before lol |
| 14:28.18 | djc12 | well there goes my chances of anybody being able to help me, since they won't even be able to follow my crazy ramblings! lol oh well ... |
| 15:03.41 | oleo | rwhitby-asleep: I've tried oleg uClibc config and issue uClibc-0.9.28$ make CROSS=mipsel-linux- TARGET_ARCH=mips |
| 15:07.15 | oleo | It compiles without problem. Without examining patches at http://wl500g.dyndns.org/uClibc-0.9.19/ I can say that uClibc can be included into Oleg firmware. |
| 15:10.23 | *** join/#nslu2-linux yvasilev (n=yvasilev@201.152.92.165) |
| 15:38.53 | *** join/#nslu2-linux cheef-daniel (n=Cheef-Da@p549AA1E5.dip0.t-ipconnect.de) |
| 17:12.10 | *** join/#nslu2-linux macsat (n=macsat@0x535b9779.arcnxx9.adsl-dhcp.tele.dk) |
| 18:01.43 | *** join/#nslu2-linux eFfeM-log (n=eFfeM@ip545787f8.direct-adsl.nl) |
| 18:28.08 | *** join/#nslu2-linux beewoolie-afk (n=beewooli@206.124.142.26) |
| 18:36.48 | *** join/#nslu2-linux Tiersten (i=tman@nslu2-linux/Tiersten) |
| 18:54.04 | *** join/#nslu2-linux AdamBaker (n=aab@userch028.dsl.pipex.com) |
| 18:59.38 | *** join/#nslu2-linux bullet (n=bullet@139.217.203.62.cust.bluewin.ch) |
| 19:01.49 | *** join/#nslu2-linux caplink811-log (n=caplink8@dslb-084-059-081-225.pools.arcor-ip.net) |
| 19:56.00 | eFfeM-log | hi, anyone familiar with audio out on the slug ? |
| 19:56.31 | CIA-16 | 03bzhou * 10unslung/make/git-core.mk: upstream upgrade from 1.0.0 to 1.0.0b |
| 20:06.02 | CIA-16 | 03bzhou * 10unslung/make/cogito.mk: upstream upgrade from 0.16 to 0.16.2 |
| 20:50.10 | *** join/#nslu2-linux marceln (n=marceln@pion.xs4all.nl) |
| 21:23.04 | *** join/#nslu2-linux geojeff (n=geojeff@adsl-64-216-124-105.dsl.bumttx.swbell.net) |
| 21:36.35 | *** join/#nslu2-linux caplink811-log (n=caplink8@dslb-084-059-099-251.pools.arcor-ip.net) |
| 21:51.44 | *** join/#nslu2-linux jcwunder (n=chris@ppp-82-135-79-159.mnet-online.de) |
| 22:16.25 | CIA-16 | 03rwhitby * 10kernel/2.6.15/55-x1205-fix-month.patch: Added x1205-fix-month patch from azummo. |
| 22:16.26 | CIA-16 | 03rwhitby * 10debian/patches/linux-2.6.15-rc5-nslu2.patch: Added x1205-fix-month patch from azummo. |
| 22:43.33 | *** join/#nslu2-linux ospfbgp (n=Router@nicholasville-terayon1-67-20-50-246.ironoh.adelphia.net) |
| 22:44.06 | *** part/#nslu2-linux ospfbgp (n=Router@nicholasville-terayon1-67-20-50-246.ironoh.adelphia.net) |
| 22:47.25 | *** join/#nslu2-linux odoc (i=odoc@is.borntobooze.de) |
| 23:11.12 | CIA-16 | 03eFfeM 07org.openembedded.dev * r311aeff3... 10/conf/distro/openslug-packages.conf: openslug-packages.conf: added madplay |
| 23:11.15 | CIA-16 | 03rwhitby 07org.openembedded.dev * r88e05eaf... 10/ (3 files in 3 dirs): nslu2-kernel: Added x1205-fix-month patch from azummo. |
| 23:38.59 | *** part/#nslu2-linux odoc (i=odoc@is.borntobooze.de) |
| 23:45.48 | *** join/#nslu2-linux nslu2-log (n=nslu2-lo@nslu2-linux/dyoung) |