irclog2html for #nslu2-linux on 20051024

`00:23.02`	`*** join/#nslu2-linux rwhitby-treo (n=ptpChat@202.139.72.42)`
`00:23.40`	`rwhitby-web`	`rwhitby-treo: test`
`00:25.56`	`*** join/#nslu2-linux rwhitby-treo (n=ptpChat@202.139.72.42)`
`00:36.02`	`*** part/#nslu2-linux rwhitby-web (n=c0589e32@nslu2-linux/rwhitby)`
`01:03.30`	`*** join/#nslu2-linux echange-m (n=change-m@h20.111.140.67.ip.alltel.net)`
`02:24.32`	`*** join/#nslu2-linux jbowler-zzz (n=jbowler@nslu2-linux/jbowler)`
`02:57.42`	`*** join/#nslu2-linux echange-m (n=change-m@h20.111.140.67.ip.alltel.net)`
`03:42.46`	`*** join/#nslu2-linux rwhitby-treo (n=ptpChat@nslu2-linux/rwhitby)`
`03:44.26`	`rwhitby-treo`	`re`
`04:49.42`	`*** join/#nslu2-linux jacques (n=username@68-191-84-51.dhcp.opls.la.charter.com)`
`05:27.14`	`*** join/#nslu2-linux rpedde (n=ron@cpe-70-114-57-34.satx.res.rr.com)`
`05:48.52`	`CIA-8`	`03rpedde * 10unslung/ (make/mt-daapd.mk sources/mt-daapd/itunes5.patch): Update mt-daapd to 0.2.3`
`06:13.57`	`*** join/#nslu2-linux jelle (n=jelle@ip54518e8c.direct-adsl.nl)`
`06:18.05`	`*** join/#nslu2-linux Tiersten (i=tman@nslu2-linux/Tiersten)`
`06:44.19`	`*** join/#nslu2-linux eumel (n=chatzill@p5483120B.dip0.t-ipconnect.de)`
`07:20.11`	`*** join/#nslu2-linux widrone (n=dronebot@bzzzt.fix.no)`
`07:51.34`	`CIA-8`	`03jbowler 07org.openembedded.dev * r00415d9b... 10/packages/ixp425-eth/ (ixp400-eth-1.4/ixp400-le-be.patch ixp400-eth_1.4.bb):`
`07:51.35`	`CIA-8`	`ixp400-eth: fix reboot (module unload) problem in LE patch for 1.4`
`07:51.35`	`CIA-8`	`<PROTECTED>`
`07:51.35`	`CIA-8`	`<PROTECTED>`
`07:51.35`	`CIA-8`	`<PROTECTED>`
`07:51.36`	`CIA-8`	`<PROTECTED>`
`08:02.08`	`CIA-8`	`03jbowler 07org.openembedded.dev * r0cc93a00... 10/packages/ixp4xx/ixp4xx-csr_1.4.bb:`
`08:02.08`	`CIA-8`	`ixp4xx-csr: improve Intel license handling in 1.4`
`08:02.08`	`CIA-8`	`<PROTECTED>`
`08:02.08`	`CIA-8`	`<PROTECTED>`
`08:02.08`	`CIA-8`	`<PROTECTED>`
`08:02.09`	`CIA-8`	`<PROTECTED>`
`08:02.12`	`CIA-8`	`03jbowler 07org.openembedded.dev * r1a06c99a... 10/packages/meta/openslug-image.bb:`
`08:02.13`	`CIA-8`	`openslug-image: add udev to RDEPENDS within openslug-image itself`
`08:02.15`	`CIA-8`	`<PROTECTED>`
`08:02.17`	`CIA-8`	`<PROTECTED>`
`08:02.19`	`CIA-8`	`<PROTECTED>`
`08:02.21`	`CIA-8`	`<PROTECTED>`
`08:02.23`	`CIA-8`	`<PROTECTED>`
`08:02.25`	`CIA-8`	`03jbowler 07org.openembedded.dev * r95824471... 10/conf/ (9 files in 2 dirs): (log message trimmed)`
`08:02.28`	`CIA-8`	`ucslugc, nslu2: formalise different build configs, move to IAL 2.0 and nslu2-kernel`
`08:02.30`	`CIA-8`	`<PROTECTED>`
`08:02.33`	`CIA-8`	`<PROTECTED>`
`08:02.33`	`*** join/#nslu2-linux bullet (n=bullet@79.31.79.83.cust.bluewin.ch)`
`08:02.34`	`CIA-8`	`<PROTECTED>`
`08:02.36`	`CIA-8`	`<PROTECTED>`
`08:02.38`	`CIA-8`	`<PROTECTED>`
`08:02.40`	`CIA-8`	`03jbowler 07org.openembedded.dev * rabfd9f00... 10/packages/uclibc/uclibc-0.9.28/ (ucslugc/uClibc.distro nslu2/uClibc.distro):`
`08:02.43`	`CIA-8`	`uclibc: rename ucslugc config file to nslu2 in 0.9.28`
`08:02.45`	`CIA-8`	`<PROTECTED>`
`08:02.47`	`CIA-8`	`<PROTECTED>`
`08:02.49`	`CIA-8`	`<PROTECTED>`
`08:08.55`	`CIA-8`	`03jbowler * 10kernel/2.6.14/10-mtdpart-redboot-fis-byteswap.patch: Remove compiler warning messages.`
`08:14.20`	`CIA-8`	`03jbowler * 10kernel/2.6.14/10-ixp4xx-gpio.patch: This patch is in 2.6.14, so no longer needed.`
`08:18.37`	`*** join/#nslu2-linux rwhitby-treo (n=ptpChat@nslu2-linux/rwhitby)`
`08:21.25`	`CIA-8`	`03jbowler 07org.openembedded.dev * r2849dc70... 10/packages/linux/ (2 files in 2 dirs): nslu2-kernel: fix redboot.c compiler warning messages in 2.6.14(all)`
`08:28.15`	`rwhitby`	`http://embedded.hk/modules/newbb/viewtopic.php?topic_id=115&forum=7 <- unslung interest from hong kong`
`08:55.56`	`rwhitby`	`jbowler-zzz: Lots of different configurations for SlugOS ! Nice work.`
`08:56.24`	`jelle`	`root`
`12:59.39`	`*** join/#nslu2-linux VoodooZ (n=VoodooZ@CPE00c0f021712c-CM000f9fac823a.cpe.net.cable.rogers.com)`
`13:34.43`	`CIA-8`	`03bzhou * 10unslung/make/py-cherrypy.mk: upstream upgrade from 2.0.0 to 2.1.0`
`15:47.00`	`*** join/#nslu2-linux jbowler-zzz (n=jbowler@nslu2-linux/jbowler)`
`16:31.32`	`*** join/#nslu2-linux jelle (n=jelle@ip54518e8c.direct-adsl.nl)`
`16:37.31`	`*** join/#nslu2-linux ferrix (n=ferrix@kekkonen.cs.hut.fi)`
`16:59.35`	`*** join/#nslu2-linux twan (n=twan@81.243.23.32)`
`16:59.51`	`*** join/#nslu2-linux ByronT_ (i=ByronT@nslu2-linux/ByronT)`
`17:41.53`	`*** join/#nslu2-linux AdamBaker (n=aab@userch028.dsl.pipex.com)`
`17:50.39`	`*** join/#nslu2-linux jelle (n=jelle@ip54518e8c.direct-adsl.nl)`
`17:55.17`	`*** join/#nslu2-linux jell1 (n=jelle@ip54518e8c.direct-adsl.nl)`
`17:56.26`	`CIA-8`	`03jbowler 07org.openembedded.dev * rafc082b3... 10/packages/ixp4xx/ixp4xx-csr_2.0.bb: ixp4xx-csr: move to NPE library 2_0_5 in 2.0`
`17:56.29`	`CIA-8`	`03jbowler 07org.openembedded.dev * r0119bfeb... 10/packages/linux/ (8 files in 2 dirs): nslu2-kernel: delete unused patches, add Debian config in 2.6.14`
`18:31.10`	`CIA-8`	`03koen 07org.openembedded.dev * r79617854... 10/conf/machine/h2200.conf: h2200.conf: change jffs2 pagesize to 4k to have more space in flashi`
`18:41.12`	`*** join/#nslu2-linux jbowler-zzz (n=jbowler@nslu2-linux/jbowler)`
`18:42.21`	`*** part/#nslu2-linux nbd (i=nbd@nbd.name)`
`18:52.45`	`Jacmet`	`damn, jtag over a byteblaster is sloooow :/`
`18:54.32`	`[g2]`	`Jacmet what are you flashing ?`
`18:54.35`	`*** join/#nslu2-linux caplink811-log (n=caplink8@dslb-084-059-109-150.pools.arcor-ip.net)`
`18:54.42`	`[g2]`	`or is it a read/verify ?`
`18:58.06`	`Jacmet`	`[g2]: I'm simply doing a memory dump to figure out where the screwed sercomm redboot places the kernel cmdline/ATAGs`
`18:58.32`	`*** join/#nslu2-linux caplink811 (n=joerg@dslb-084-059-109-150.pools.arcor-ip.net)`
`18:58.47`	`Jacmet`	`[g2]: it's been running for ~ 15 mins and I'm at around 200 kb now ;)`
`18:58.48`	`[g2]`	`Jacmet bad news the screwed Redboot from sercom doesn't pass ro use cmdline/ATAGs`
`18:59.39`	`[g2]`	`I think it takes 40-50 to flash redboot with JTAG`
`18:59.39`	`Jacmet`	`[g2]: sure? that functionaly has basically been in redboot from the beginning, and I didn't see anything affecting that in the sercomm patch`
`18:59.49`	`[g2]`	`yep`
`18:59.58`	`[g2]`	`it's a bastardized version of Redboot`
`19:00.21`	`Jacmet`	`[g2]: that I know ;)`
`19:00.28`	`[g2]`	`we were all over this like white on rice July/August '04`
`19:00.35`	`[g2]`	`maybe sept too`
`19:00.39`	`Jacmet`	`[g2]: ohh, ok`
`19:00.58`	`Jacmet`	`[g2]: did you find where in the sercomm stuff they fucked up the exec?`
`19:01.40`	`[g2]`	`iirc it's a pretty fixed boot process that runs the sercom check and boot`
`19:02.26`	`Jacmet`	`[g2]: yes, the additional sercomm commands (boot, upgrade, .. are, but exec looks like the standard redboot one`
`19:02.32`	`[g2]`	`Redboot was replaced by a few ppl`
`19:02.54`	`[g2]`	`I mean a standard version of Redboot`
`19:03.20`	`[g2]`	`I replaced it with APEX for the fatslug and on a couple other slugs`
`19:03.48`	`*** join/#nslu2-linux odoc (i=odoc@is.borntobooze.de)`
`19:03.49`	`Jacmet`	`[g2]: Ok, getting a std redboot going should be fairly easy if the npe crap doesn't give too much trouble`
`19:04.14`	`[g2]`	`Hopefully, I'll have get all the souces for the current version I'm running now on the Loft that support booting from CF/Microdrive`
`19:04.33`	`[g2]`	`s/souces/souces this week/`
`19:04.40`	`Jacmet`	`[g2]: ok - did you get the cf driver running under 2.6?`
`19:05.18`	`[g2]`	`I haven't played with it much since a week or two ago`
`19:05.27`	`[g2]`	`that's may appear this week also`
`19:05.39`	`Jacmet`	`ok, great`
`19:06.10`	`Jacmet`	`[g2]: so the lofts are basically ready to ship now or what?`
`19:06.11`	`[g2]`	`I've been loading my rootfs off /dev/sdaX for I think close to two weeks`
`19:06.39`	`[g2]`	`yeah pretty muchl. there's some I2C drivers and a little clean up`
`19:06.51`	`*** join/#nslu2-linux jbowler-away (n=jbowler@nslu2-linux/jbowler)`
`19:07.11`	`[g2]`	`The boxes are getting made and after I see one the box production will be turned on`
`19:07.16`	`Jacmet`	`ok`
`19:07.19`	`Jacmet`	`cool`
`19:07.25`	`[g2]`	`I've been very happy with the boards overall`
`19:08.39`	`[g2]`	`even thought I don't use it very much anymore the load -m disk hda1:/boot/zImage is sweet`
`19:09.06`	`Jacmet`	`[g2]: exactly`
`19:09.22`	`[g2]`	`what I'd like to do in the next couple months is teach Redboot to look across the PCI/USB bus to do`
`19:09.31`	`[g2]`	`-m disk sda1:/boot/zImage`
`19:09.50`	`Jacmet`	`[g2]: that's going to be hard as redboot/ecos doesn't have any usb host support`
`19:10.00`	`[g2]`	`There's a minor switch on the loft to go to either a 4MB or 8MB NOR flash`
`19:10.05`	`Jacmet`	`[g2]: I think uboot would be the way to go for such stuff`
`19:10.27`	`[g2]`	`My version has lspci`
`19:10.47`	`[g2]`	`bewoolie did the ext2 drivers for APX`
`19:10.48`	`Jacmet`	`[g2]: I'm using redboot for some projects at work, but I'm seriously considering to switch to uboot for the added features`
`19:10.50`	`[g2]`	`bewoolie did the ext2 drivers for APEX`
`19:11.01`	`[g2]`	`which version 2.01 ?`
`19:11.05`	`Jacmet`	`[g2]: yes, ecos/redboot has pci, but it doesn't have usb host`
`19:11.10`	`CIA-8`	`03jbowler 07org.openembedded.dev * rf0e6ce1b... 10/conf/distro/ (nslu2-dist.conf ucslugc.conf): ucslugc: correct UCSLUG_EXTRA_BBFILES, damaged by change to nslu2-dist.conf in distro conf`
`19:11.20`	`Jacmet`	`[g2]: no, standard cvs (it's on ppc)`
`19:11.39`	`Jacmet`	`[g2]: yes, redboot also has ext2 and fat support`
`19:11.44`	`Jacmet`	`+ jffs2`
`19:11.44`	`[g2]`	`for a bulk device with just reading 1 block at a time I don't think it would be too terrible`
`19:12.07`	`Jacmet`	`[g2]: perhaps not, but probably more work than simply compiling uboot ;)`
`19:12.16`	`Jacmet`	`uboot supports tons of stuff`
`19:12.45`	`[g2]`	`I'll bet uboot doesn't have NPE support :)`
`19:12.52`	`[g2]`	`or NPE LE`
`19:13.02`	`[g2]`	`the 2.01 is running the 1.5 IAL`
`19:13.16`	`Jacmet`	`[g2]: probably not, I think the only supported ixp42x board uses an intel nic on pci`
`19:13.32`	`[g2]`	`I'm using the NPE`
`19:13.50`	`Jacmet`	`but uboot supports usb host, lcd, a heck of a lot of file systems, ..`
`19:13.59`	`Jacmet`	`[g2]: yes I know`
`19:14.25`	`Jacmet`	`[g2]: but I guess it shouldn't be that hard to move the npe support from redboot to uboot`
`19:14.27`	`[g2]`	`ah.. you meant uboot only non-NPE etherent`
`19:14.48`	`Jacmet`	`yes exactly`
`19:14.54`	`[g2]`	`it's really a non-issue for the Loft in going to the 4/8MB NOR flash`
`19:15.03`	`Jacmet`	`[g2]: ok`
`19:15.12`	`[g2]`	`so it's all icing on the cake`
`19:15.24`	`Jacmet`	`[g2]: does setting the kernel cmdline with exec -c "blah" work on the loft?`
`19:15.42`	`[g2]`	`for over a month :)`
`19:15.56`	`[g2]`	`probably close to 6 weeks now`
`19:16.08`	`Jacmet`	`[g2]: great, was any special hacking needed or is it just a sercomm screwup?`
`19:16.10`	`[g2]`	`full config et...`
`19:16.21`	`[g2]`	`scripts etc...`
`19:16.27`	`Jacmet`	`ok`
`19:16.39`	`[g2]`	`when power is applied it's just on`
`19:16.46`	`Jacmet`	`.. like a normal redboot instead of the silly sercomm version ;)`
`19:16.52`	`[g2]`	`exactly`
`19:16.59`	`[g2]`	`it's actually like a normal PC`
`19:17.31`	`[g2]`	`it's loading kernel from a partition in JFFS2 and booting direclty to the rootfs on sda7`
`19:17.46`	`[g2]`	`it was sda1/3 and 5 for a while`
`19:18.22`	`[g2]`	`so a full debian BE with Postfix, Courier, Spamassasin, thttp, iptables, etc... just boot`
`19:18.26`	`[g2]`	`boots`
`19:18.42`	`Jacmet`	`nice`
`19:19.11`	`[g2]`	`there's just the forward port of the i2c driver to 2.6 from 2.4 and the CF/Microdriver for nice`
`19:19.26`	`[g2]`	`all the drivers work in 2.4 so the hw is good`
`19:19.35`	`[g2]`	`is simply a forward port`
`19:21.01`	`[g2]`	`So this weeks plan is build and flash Redboot from scratch and put together the debian roots and I've got a kernel so an initial full system will be ready to go`
`19:21.31`	`[g2]`	`I'll be starting the 24/7 testing soon`
`19:22.29`	`[g2]`	`it's run fine 24/7 for a many days, but I'll really start load testing on it's own network/setup soon`
`19:43.52`	`*** join/#nslu2-linux [cc]smart (n=smart@gw.ptr-62-65-149-158.customer.ch.netstream.com)`
`20:04.15`	`dwery`	`[g2]: the i2c driver required porting?`
`20:09.53`	`*** join/#nslu2-linux yvasilev (n=yvasilev@dsl-200-95-95-155.prod-infinitum.com.mx)`
`20:16.10`	`*** join/#nslu2-linux Magma82 (n=Magma82@213-228-241-162.dsl.prodigynet.co.uk)`
`20:16.12`	`Magma82`	`hey all`
`20:16.21`	`Magma82`	`anyone free to offer some help`
`20:16.55`	`Magma82`	`ah sorry wrong channel`
`20:16.57`	`Magma82`	`heading to general`
`20:17.16`	`*** part/#nslu2-linux Magma82 (n=Magma82@213-228-241-162.dsl.prodigynet.co.uk)`
`20:31.47`	`*** join/#nslu2-linux twan (n=twan@237-159.244.81.adsl.skynet.be)`
`20:33.25`	`*** part/#nslu2-linux odoc (i=odoc@is.borntobooze.de)`
`20:42.11`	`*** join/#nslu2-linux jelle (n=jelle@ip54518e8c.direct-adsl.nl)`
`20:43.27`	`*** join/#nslu2-linux twan (n=twan@237-159.244.81.adsl.skynet.be)`
`20:50.17`	`*** join/#nslu2-linux Tiersten (i=tman@nslu2-linux/Tiersten)`
`21:11.52`	`*** join/#nslu2-linux cbrake2 (n=cbrake2@cpe-24-166-121-47.neo.res.rr.com)`
`21:19.44`	`dwery`	`rwhitby: ping`
`21:27.49`	`rwhitby`	`dwery: gu`
`21:29.18`	`dwery`	`rwhitby: Had no time to test tha jffs2 thing :)`
`21:29.44`	`dwery`	`what's interesting in R63?`
`21:30.00`	`rwhitby`	`it has a commercial ntfs driver in it.`
`21:30.15`	`rwhitby`	`(paragon software)`
`21:31.22`	`dwery`	`ow`
`21:31.24`	`dwery`	`wow`
`21:32.19`	`dwery`	`but is that really useful on a nas?`
`21:34.45`	`rwhitby`	`it is for people who want to attach a drive direct from their windows machine`
`21:36.50`	`*** join/#nslu2-linux jelle (n=jelle@ip54518e8c.direct-adsl.nl)`
`21:41.53`	`dwery`	`oh`
`21:43.06`	`dwery`	`anything else really useful? :-D`
`21:44.14`	`*** join/#nslu2-linux cbrake2 (n=cbrake2@cpe-24-166-121-47.neo.res.rr.com)`
`21:45.56`	`dwery`	`like maybe they fixed some kernel bugs for us :)`
`21:48.47`	`rwhitby`	`you know that it's a 2.4.x kernel, right?`
`21:49.24`	`dwery`	`uhm.. no.. I think none of my slugs actually runned it :)`
`21:51.25`	`dwery`	`it seems my slugs have different rtc compensation values.. maybe they actually even tried to calibrate them`
`21:51.57`	`Tiersten`	`What compensation value you talking about?`
`21:52.20`	`Tiersten`	`It's highly unlikely that they're calibrating them BTW`
`21:53.24`	`dwery`	`the x1205 has two compensation registers`
`21:53.32`	`dwery`	`and you can calibrate them`
`21:53.48`	`Tiersten`	`The trimming ones? Aren't they done by Xicor?`
`21:54.01`	`dwery`	`actual trimming must be done on the final board`
`21:54.04`	`dwery`	`withj xtal`
`21:54.07`	`dwery`	`and everything else`
`21:54.16`	`dwery`	`otherwise is not much useful imho`
`21:54.52`	`Tiersten`	`Unless it is part of the driver I don't see it being changed`
`21:55.25`	`dwery`	`if they have calibrated it, it must have been done with come custom utility`
`21:55.27`	`dwery`	`anyway`
`21:55.59`	`Tiersten`	`It really is unlikely that they've done this. It's not worth the extra time for them. Considering how crap the time keeping was for the initial releases of the firmware I don't think they care`
`21:56.15`	`Tiersten`	`Their "fix" was to put in a cronjob that periodically resynced the kernel clock to the hardware clock`
`21:56.26`	`Tiersten`	`Which is a total hack since you're got to have massive jumps`
`21:56.31`	`Tiersten`	`you're going to have`
`21:56.37`	`dwery`	`yep . anyway the values are exported with /proc/driver/rtc in the latest development version`
`21:56.55`	`dwery`	`of the x1205 driver.`
`21:57.17`	`dwery`	`digital_trim : -30 ppm`
`21:57.17`	`dwery`	`analog_trim : 18.750 pF`
`21:58.26`	`Tiersten`	`How close are the two nslu2s?`
`21:58.43`	`dwery`	`mm.. can't check the other on right now..`
`21:59.29`	`dwery`	`maybe we can make an utility to calculate the compensation`
`22:00.01`	`Tiersten`	`adjtimex`
`22:00.12`	`dwery`	`comparing the hwclock with an ntp reference and bypassing the sw clock`
`22:00.35`	`[g2]`	`dwery not the i2c the actual devices on the i2c`
`22:00.53`	`dwery`	`[g2]: which ones weren't available on 2.6?`
`22:02.33`	`[g2]`	`the on the board`
`22:02.53`	`[g2]`	`the chips on the board temp/voltage sensor, stuff like that`
`22:02.57`	`Tiersten`	`dwery: 18.750pF is the maximum. It looks like the values are just random and whatever it came from at the factory`
`22:02.58`	`dwery`	`ah ok`
`22:03.10`	`dwery`	`Tiersten: probably`
`22:03.17`	`Tiersten`	`Ditto for the digital_trim`
`22:03.23`	`Tiersten`	`111 = -30`
`22:03.59`	`[g2]`	`dwery Tiersten don't things run faster/slower at different temps`
`22:04.24`	`[g2]`	`so they'd need to be calibrated for a temp range ?`
`22:04.33`	`dwery`	`yes, but the variation should be minimum`
`22:05.07`	`[g2]`	`generally yes, but between summer and winter there might be 5C diff`
`22:05.11`	`Tiersten`	`Yes. You calibrate for the average temperature that the device is expected to be used in. The difference should be minimal unless you happen to live in the Sahara`
`22:05.15`	`Tiersten`	`5C is nothing`
`22:05.29`	`[g2]`	`heh`
`22:05.49`	`Tiersten`	`The datasheet says it's got internal compensation for it`
`22:06.32`	`Tiersten`	`20C - 30C is the best range according to the datasheet. If you can keep it within those values then it'll be most accurate`
`22:07.06`	`jacques`	`jbot, status`
`22:07.07`	`jbot`	`Since Tue Oct 18 07:11:25 2005, there have been 122 modifications, 816 questions, 0 dunnos, 0 morons and 857 commands. I have been awake for 6d 14h 55m 41s this session, and currently reference 109445 factoids. I'm using about 19016 kB of memory. With 0 active forks. Process time user/system 19760.63/1110.91 child 0.04/0.01`
`22:22.11`	`*** join/#nslu2-linux jelle (n=jelle@ip54518e8c.direct-adsl.nl)`
`22:48.56`	`*** join/#nslu2-linux jell1 (n=jelle@ip54518e8c.direct-adsl.nl)`
`22:51.48`	`CIA-8`	`03rwhitby * 10debian/configs/nslu2_defconfig-2.6.14-rc5: copied from -rc4`
`23:05.13`	`*** join/#nslu2-linux jbowler (n=jbowler@nslu2-linux/jbowler)`
`23:05.39`	`*** join/#nslu2-linux cbrake2 (n=cbrake2@cpe-24-166-121-47.neo.res.rr.com)`
`23:06.33`	`CIA-8`	`03rwhitby * 10debian/Makefile: Added the "packages" target for building kernel packages.`
`23:28.33`	`*** join/#nslu2-linux cbrake2 (n=cbrake2@cpe-24-166-121-47.neo.res.rr.com)`
`23:28.42`	`*** join/#nslu2-linux yvasilev (n=yvasilev@dsl-200-95-95-155.prod-infinitum.com.mx)`
`23:32.50`	`*** join/#nslu2-linux cbrake2 (n=cbrake2@cpe-24-166-121-47.neo.res.rr.com)`
`23:49.00`	`*** join/#nslu2-linux Dsbeerf (n=Dsbeerf@modemcable137.101-200-24.mc.videotron.ca)`
`23:49.25`	`*** part/#nslu2-linux Dsbeerf (n=Dsbeerf@modemcable137.101-200-24.mc.videotron.ca)`

Generated by irclog2html.pl by Jeff Waugh - find it at freshmeat.net! Modified by Tim Riker to work with blootbot logs, split per channel, etc.