| 00:24.36 | *** join/#nslu2-linux jbot (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) |
| 00:24.36 | *** topic/#nslu2-linux is Developer (not end-user) discussion about modifying the Linux operating system on the Linksys NSLU2. Use #nslu2-general for end-user questions. See www.nslu2-linux.org for info, and be sure to read www.nslu2-linux.org/wiki/Main/FAQ before asking questions. |
| 00:43.46 | *** join/#nslu2-linux dyoung (n=dyoung@nslu2-linux/dyoung) |
| 02:07.42 | *** join/#nslu2-linux peteru-home (n=peteru-h@adsl-53-18.swiftdsl.com.au) |
| 02:24.34 | *** join/#nslu2-linux nslu2-log (n=nslu2-lo@nslu2-linux/dyoung) |
| 02:24.36 | *** join/#nslu2-linux nslu2bot (n=supybot@netblock-66-159-209-52.dslextreme.com) |
| 02:27.31 | *** join/#nslu2-linux nslu2-log_ (n=nslu2-lo@nslu2-linux/dyoung) |
| 02:30.10 | *** join/#nslu2-linux nslu2bot` (n=supybot@netblock-66-159-209-6.dslextreme.com) |
| 02:36.13 | *** join/#nslu2-linux senneth (i=senneth@irssi/staff/senneth) |
| 02:55.24 | *** join/#nslu2-linux conradl (n=abuse@dsl-215.3.240.220.rns01-kent-syd.dsl.comindico.com.au) |
| 03:42.01 | *** join/#nslu2-linux Eiffel_ (n=Clue@p54869E19.dip0.t-ipconnect.de) |
| 04:44.45 | conradl | anybody wanna answer a serial cable Question? |
| 04:50.39 | peteru-home | you can try asking :-) |
| 04:52.15 | conradl | well....I have now a usb> nokia cable that nslu2 and other pages say works for serial low > high volts. |
| 04:53.27 | conradl | i also have a serial only version of the same thing. So the phone is happy either way. right. but is the nslu2? |
| 04:54.28 | conradl | Short question is there a way to test or have i done that (the phone) |
| 04:56.20 | conradl | logic is the usb cable is a good thing therefore the same cable in serial MUST be fine as well. |
| 04:59.14 | *** join/#nslu2-linux VirtualCtor (n=tlewis@c-65-96-81-203.hsd1.ma.comcast.net) |
| 05:02.05 | peteru-home | conradl: I'm actually using the Compsys MAX 3232 based adaptor. No first hand experience with the hacked mobile phone cables here. |
| 05:03.43 | peteru-home | However, if you have a cable that works with the phone at TTL levels and you don't butcher it too much when adapting for the NSLU2, then it ought to work. |
| 05:04.31 | conradl | Thats my thought. the serial phone cable must have hidden magic . |
| 05:04.52 | conradl | rather than a bump in the middle of the cable. |
| 05:05.58 | peteru-home | Most of these devices have a transceiver circuit in one of the connectors. I think there are pictures on the wiki. |
| 05:06.49 | conradl | yeah... i cant see the goodness in the serial cable thou. err on the side of caution. |
| 05:09.58 | conradl | confirmed---google worked after a real effort. its all good. |
| 05:15.34 | ByronT | conradl |
| 05:16.20 | ByronT | your cable doesn't have the big dongle in the middle? |
| 05:19.29 | conradl | the usb from rod does but my serial dosn't |
| 05:20.17 | conradl | but they do the same job so...my serial cable must be fine? |
| 05:20.28 | ByronT | the reason the dongle is important is because it usually houses a PL2303 chip |
| 05:20.56 | conradl | thats right but the pl2303 is usb to serial @ 3 or 5 volt |
| 05:21.38 | conradl | the phone in question 6210 needs 3 volt so the serial cable must be hideing a secret. |
| 05:22.20 | ByronT | if it doesn't have a PL2303 chip in it, then *I'm* not sure that it would work.... |
| 05:23.02 | conradl | Thats the prob...how to test cheaply...ie no cost to my nslu2 or soon to be ds101g= |
| 05:23.16 | ByronT | it might, but then again in trying to figure out if you've got the right lines - you might burn out a pin on the IXP |
| 05:25.33 | conradl | yeah i hear thats fun. i can ident the gnd and data in/out. but. |
| 05:26.02 | ByronT | I speak from experience.... |
| 05:26.17 | ByronT | I've got 9 extra cables here |
| 05:26.33 | conradl | all ready to rock. |
| 05:26.56 | conradl | http://www.atrox.at/datacable/dau9/index.html |
| 05:27.20 | ByronT | on my third cable, I killed the rx pin on FrankenSlug |
| 05:27.44 | conradl | i don't know if should tell people that, |
| 05:29.54 | conradl | i just looked @ it. there are two data paths fbus/mbus |
| 05:30.11 | ByronT | yeah, I'm looking at it right now |
| 05:31.03 | conradl | so usb is fine right. but the serial could be using mbus pin6 only? not the needed pins 7/8 |
| 05:33.11 | conradl | test on rods new ds101? first? |
| 05:34.01 | ByronT | heh, I don't think I would recommend that... :) |
| 05:34.24 | conradl | if i built it i would be happy A. cos i did it and B I know whats connected. |
| 05:34.42 | conradl | he wouldn't even know till he opened the airbag.... |
| 05:35.04 | ByronT | except that he's awake and reading this log..... |
| 05:35.11 | conradl | I think the seal should stay on his now i said that |
| 05:38.40 | conradl | looking @ a pic of the serial cable ...thats a big sealed backshell. could contain goodness. |
| 05:45.05 | conradl | the usb is a fbus cable...so i need to do the same test on the serial when i get home. |
| 05:47.00 | conradl | this is prob so basic to someone reading this. |
| 05:53.48 | *** join/#nslu2-linux eumel (n=chatzill@p54831783.dip0.t-ipconnect.de) |
| 06:43.28 | *** join/#nslu2-linux odoc (i=odoc@is.borntobooze.de) |
| 06:47.11 | *** join/#nslu2-linux DaKa (n=david@nslu2-linux/daka) |
| 07:40.29 | *** join/#nslu2-linux MooZ (n=vcruz@sete.idealx.com) |
| 07:40.53 | MooZ | hi |
| 07:49.45 | peteru-home | lo |
| 07:53.44 | *** join/#nslu2-linux kolla (i=kolla@firda.uninett.no) |
| 08:43.47 | *** join/#nslu2-linux Airw0lf (n=Miranda@203-173-150-26.bliink.ihug.co.nz) |
| 09:24.14 | rwhitby-away | Anyone who wants a free Opera registration, just send an empy email to registerme@opera.com - apparently it is their 10th anniversary and they are giving them away free today. I just sent an email, and an auto-responder sent back registration codes for all platforms. |
| 09:25.39 | rwhitby-away | "For one day only, you can get an ad-free version of Opera. Simply e-mail registerme@opera.com to obtain a registration code. This offer is valid from 12 a.m. Tuesday, August 30 to 12 a.m. Wednesday, August 31 2005 (PDT)." |
| 09:30.52 | odoc | nice |
| 09:30.53 | odoc | tnx |
| 09:32.22 | *** join/#nslu2-linux lamp_ (n=lamp@mail.sernet.com.cn) |
| 09:32.41 | odoc | just unbricking my first slug with jtag atm .. .btw |
| 09:38.53 | copperbeech | rwhitby: I'm looking into that appweb issue... |
| 09:40.14 | copperbeech | what puzzles me though is that when I built appweb using the make file and then installed it I didn't get this problem. I don't have any dev environment installed on the slug |
| 09:40.41 | *** join/#nslu2-linux Airw0lf (n=Miranda@203-173-150-26.bliink.ihug.co.nz) |
| 09:41.09 | copperbeech | could it be that I did my testing from the unslung cvs tree? I got the whole thing down freshly when I did the development of appweb Makefile a couple of weeks ago. |
| 09:41.44 | rwhitby | dunno. |
| 09:41.51 | copperbeech | have there been any changes to the appweb.mk file since I uploaded it? |
| 09:41.59 | rwhitby | don't think so |
| 09:42.13 | copperbeech | I'm on to the appweb developers to see if they have any thoughts. |
| 09:47.42 | copperbeech | rwhitby: just a thought... do you think there are any conditions where the library path might not be found during the /opt/etc/init.d boot sequence, but would be found if the init.d file was run from a console ofter subsequently logging in. |
| 09:49.01 | copperbeech | only reason I ask is that I seem to have a similar error in my historic logs which happened on reboot of the slug (which I assumed was because I moved the web space into a user's quota) |
| 09:50.09 | rwhitby | do you have LD_LIBRARY_PATH in any of your profile or bashrc files ? |
| 09:52.58 | copperbeech | nope... |
| 09:53.18 | rwhitby | dunno then |
| 09:53.22 | copperbeech | just checked the ~/. files and the /opt/etc/ files.. |
| 09:53.32 | copperbeech | hmmm very strange... |
| 09:53.36 | copperbeech | thanks. |
| 10:01.29 | CIA-8 | 03koen 07org.openembedded.dev * r2df03676... 10/packages/libmimedir/libmimedir_cvs.bb: libmimedir: add upstream source |
| 10:01.32 | CIA-8 | 03koen 07org.openembedded.dev * recf0ce2f... 10/packages/libmimedir/libmimedir_cvs.bb: libmimedir_cvs: default_preference = -1 |
| 10:37.31 | odoc | jtag worked ... nice |
| 10:44.05 | *** join/#nslu2-linux [g2] (n=g2@nslu2-linux/g2) |
| 11:13.52 | *** part/#nslu2-linux lamp_ (n=lamp@mail.sernet.com.cn) |
| 11:18.03 | odoc | did this work for anybody ? : fis write -f 0x50000000 -b 0x01000000 -l 0x00800000 |
| 11:19.15 | odoc | im getting: Err = 9910 |
| 11:19.23 | odoc | and a destroyed redboot |
| 11:19.30 | odoc | so .. don't try this @ home ;P |
| 11:20.09 | Tiersten | uh |
| 11:20.13 | Tiersten | no... you shouldn't do that |
| 11:20.24 | Tiersten | The correct command is "fis write -f 0x50060000 -b 0x01060000 -l 0x7a0000" |
| 11:20.38 | Tiersten | You just overwrote RedBoot and since you're actually using RedBoot at the same time it doesn't appreciate it |
| 11:20.49 | odoc | i wanted to set the mac adress |
| 11:20.56 | odoc | so i patched the bin |
| 11:21.01 | odoc | as stated in the wiki |
| 11:21.17 | Tiersten | If you want to replace RedBoot then you should write it from Linux |
| 11:21.33 | Tiersten | Or load a RAM only copy of RedBoot and jump to that from the flash copy |
| 11:21.45 | odoc | cause the nslu wont boot the firmware aftet running redboot |
| 11:21.49 | odoc | after |
| 11:22.01 | Tiersten | You've partially erased it. that's why it's not booting |
| 11:22.26 | Tiersten | Where does it tell you to edit the MAC address in the RedBoot blocks? |
| 11:23.24 | Tiersten | Are you able to recover it? |
| 11:23.48 | odoc | http://www.nslu2-linux.org/wiki/HowTo/RecoverFromABadFlash |
| 11:23.56 | odoc | MAC Address Hosed |
| 11:24.15 | odoc | yes .. the slug is jtag enabled |
| 11:24.15 | Tiersten | hrm |
| 11:24.28 | Tiersten | I'd better get rid of that |
| 11:24.31 | odoc | redboot is dead ... so i have to wait another hour :) |
| 11:24.36 | Tiersten | wonder who added it |
| 11:24.37 | Tiersten | 40 minutes :) |
| 11:24.46 | odoc | jup .. didn't work for me the first time |
| 11:24.53 | odoc | cause of that ... my nslu has jtag now .) |
| 11:25.14 | Tiersten | ahh |
| 11:25.32 | Tiersten | I've replaced RedBoot with no problems from Linux |
| 11:25.42 | Tiersten | Never tried whilst it was actually running at the same time |
| 11:26.01 | odoc | should i flash apex this time ... or stay with redboot ? |
| 11:26.20 | Tiersten | Up to you. APEX doesn't support the NPEs but it is smaller |
| 11:27.01 | odoc | so i stay with redboot for the moment |
| 11:29.03 | dyoung | odoc, do you have a backup copy of redboot by chance? |
| 11:29.56 | dyoung | I should say of *your* redboot. |
| 11:30.01 | odoc | nope |
| 11:30.06 | dyoung | Ok |
| 11:30.06 | odoc | it was killed long time ago :( |
| 11:30.28 | dyoung | do you have a copy of the R29 linksys firmware handy, or a openslug image handy? |
| 11:30.28 | odoc | ive got one with dd if=images/Unslung-5.5-beta.bin of=redboot.bin ibs=1 count=262144 conv=swab |
| 11:30.37 | dyoung | Aha, so you do have it |
| 11:30.42 | dyoung | cool. |
| 11:30.46 | odoc | but used a patched linksys one |
| 11:30.57 | odoc | i unbricked the nslu 2 hours ago |
| 11:31.02 | odoc | and now its bricked again ;P |
| 11:31.16 | odoc | but this time ... it isn't detected via jtag :( |
| 11:31.21 | odoc | let me check cables |
| 11:31.24 | dyoung | oh.... |
| 11:32.38 | odoc | mhh |
| 11:32.42 | Tiersten | ? |
| 11:32.42 | odoc | wtf? |
| 11:32.53 | odoc | jtag> detect |
| 11:32.53 | odoc | jtag> |
| 11:33.02 | odoc | doesn't look good |
| 11:33.16 | Tiersten | Does the cable command give any errors? |
| 11:33.30 | odoc | no |
| 11:33.43 | Tiersten | Unplug the NSLU2 and plug it back in |
| 11:33.49 | Tiersten | from power and JTAG |
| 11:36.00 | odoc | still dead |
| 11:36.10 | odoc | will reboot this box too ... just in case |
| 11:36.19 | *** join/#nslu2-linux conradl (n=abuse@CPE-60-226-17-180.qld.bigpond.net.au) |
| 11:36.19 | *** part/#nslu2-linux odoc (i=odoc@is.borntobooze.de) |
| 11:36.57 | rwhitby-away | conradl: can you check the output of the serial cable with a voltmeter? |
| 11:37.08 | rwhitby-away | if it's 3.3V, then it can't hhurt |
| 11:38.13 | conradl | scope only...i sold mine when i moved to oz. |
| 11:38.25 | rwhitby-away | scope will tell you voltages, right? |
| 11:38.36 | conradl | sort of |
| 11:38.46 | Tiersten | Get the ruler out :) |
| 11:39.17 | conradl | even @ 2400 Baud its hard to measure little pulses |
| 11:39.56 | Tiersten | It's not a DSO? |
| 11:40.15 | conradl | its all good i will put your cable with your new toy and send it at MAX speed. |
| 11:40.39 | dyoung | Just measure the TX pin |
| 11:40.46 | conradl | with ? |
| 11:40.52 | *** join/#nslu2-linux odoc (i=odoc@is.borntobooze.de) |
| 11:40.59 | dyoung | a scope or voltmeter |
| 11:41.22 | dyoung | when nothing is being transmitted it'll be logic high |
| 11:41.37 | odoc | still dead |
| 11:41.49 | odoc | dyoung, talking to me ? |
| 11:41.49 | conradl | please hold |
| 11:41.57 | Tiersten | odoc: He was talking to conradl |
| 11:42.02 | odoc | k |
| 11:42.14 | Tiersten | odoc: Nothing at all? Does the LED light? |
| 11:42.24 | odoc | had some probs with my bnc .. .sometimes it doesnt deconnect from freenode |
| 11:42.31 | odoc | only the led of the power switch |
| 11:43.26 | Tiersten | Do you get any output on the serial port? |
| 11:43.39 | odoc | no |
| 11:43.40 | odoc | nothing |
| 11:44.55 | rwhitby-away | odoc: how did you brick it in the first place (i.e. the time before running the dangerous wiki instructions) ? |
| 11:47.11 | odoc | the first time with the wiki instructions ;P |
| 11:47.14 | odoc | long story |
| 11:47.29 | odoc | the nslu was unstable ... got kernel oops even with original fw |
| 11:48.14 | Tiersten | Sounds like the bad hardware |
| 11:48.24 | Tiersten | The original firmware shouldn't have given you any oopses |
| 11:49.00 | odoc | i think so too |
| 11:49.07 | odoc | first i thought it was the turbo mode |
| 11:49.27 | odoc | but even after reassembling R83 it was unstable |
| 11:49.29 | Tiersten | Even if it was bad RAM then you should still be able to get JTAG working as it's part of the IXP itself |
| 11:49.46 | rwhitby-away | odoc: and then ... |
| 11:49.53 | odoc | will build a real jtag adapter from byteblaster to slug tonight |
| 11:50.12 | odoc | it was attached to my bread board ... but worked fine the first time |
| 11:50.33 | rwhitby-away | why did you decide to reflash the bootloader? |
| 11:50.44 | odoc | rwhitby-away, was my last try |
| 11:51.09 | odoc | the slug was already unusable |
| 11:51.16 | odoc | so nothing i could damage |
| 11:51.26 | rwhitby-away | but the bootloader plays absolutely no part in normal operation. if the kernel boots, then the bootloader has done it's job. |
| 11:51.30 | odoc | before playing around ... it rest for about 5 minutes |
| 11:51.56 | odoc | though that maybe it could be a strange setting in flash |
| 11:52.22 | odoc | and because of serial and r83 it was out of warranty |
| 11:57.00 | *** join/#nslu2-linux mcdmx (n=mcdmx@84-73-8-165.dclient.hispeed.ch) |
| 11:58.31 | *** join/#nslu2-linux twan (n=twan@46.109-201-80.adsl.skynet.be) |
| 12:00.59 | odoc | Device Id: 00011001001001110111000000010011 |
| 12:01.05 | odoc | was a connection problem ;( |
| 12:01.27 | rwhitby | mcdmx: thx again for the DS101g mtd dumps |
| 12:02.00 | mcdmx | rwhitby: your welcome... So what's your decision? |
| 12:02.25 | rwhitby | actually, you can help - how loud is the fan ? |
| 12:03.26 | mcdmx | rather noisy :( |
| 12:03.44 | mcdmx | (a high-pitched noise) |
| 12:03.52 | rwhitby | mcdmx: that's *not* what I wanted to hear ... |
| 12:04.16 | mcdmx | I asked my vendor for a replacement but had no luck :( |
| 12:04.34 | rwhitby | conradl: you listening to this ? |
| 12:04.50 | mcdmx | but if the ds-101g doesn't require a fan, i wonder if one could just disable it |
| 12:04.59 | mcdmx | s/ds-101g/ds-101/ |
| 12:05.44 | Tiersten | odoc: Ah cool |
| 12:05.49 | peteru-home | 101 is fanless, 101g is supposed to have a "quiet" fan with speed control. |
| 12:06.00 | odoc | flashing redboot right now |
| 12:06.01 | mcdmx | rwhitby: I just sent a optware patch to NAiL for the ds-101g. I am now able to build binaries for it. |
| 12:06.13 | rwhitby | mcdmx: do you have an sf.net id ? |
| 12:06.19 | mcdmx | peteru-home: i did not notice anything about the speed control. |
| 12:06.27 | mcdmx | rwhitby: yes... why? |
| 12:06.50 | rwhitby | what is it? I'll get you optware write access right here and now |
| 12:07.35 | mcdmx | rwhitby: it's the same id as my irc nick ;-) But i'm not sure if i'm ready to commit to cvs yet... |
| 12:08.25 | peteru-home | mcdmx: Well, I am making the assumption that "smart fan" in synology speak is the same as "smart fan" in normal PC mobo/PSU speak - fan speed linked to temperature sensor |
| 12:08.48 | mcdmx | rwhitby: besides, i don't own a ds-101g+ myself. The box I'm currently hacking on belongs to a friend... |
| 12:09.39 | rwhitby | mcdmx: if you've built an optware binary for a new arch, then you are definitely ready for cvs access |
| 12:10.25 | mcdmx | rwhitby: yes, but as soon as i have returned the box, it makes no sense to have cvs write access ;-) |
| 12:11.09 | rwhitby | mcdmx: too late, you've got it now |
| 12:11.21 | mcdmx | arghh..... |
| 12:11.49 | odoc | hehe ... its not often people fighting AGAINST cvs-write access ;P |
| 12:12.18 | rwhitby | odoc: this is a meritocracy - doesn't matter whether you want it or not :-) |
| 12:12.30 | rwhitby | if you're good enough, you get it ... |
| 12:12.41 | dyoung | odoc, so youre paying the 40-minute penalty now? |
| 12:12.54 | rwhitby | plenty of time to check in the optware changes .... |
| 12:12.56 | odoc | yes |
| 12:13.00 | dyoung | did you remember to twiddle the MAC into there before starting? |
| 12:13.13 | odoc | yes |
| 12:13.14 | odoc | :) |
| 12:13.16 | dyoung | (into your redboot image that is) |
| 12:13.17 | dyoung | Good. |
| 12:13.26 | odoc | i need turbo-jtag :) |
| 12:13.28 | conradl | rods cable peak to 2.8 v and mine are from 0 to 8V and one dead, and one noisey fan to clip out maybe |
| 12:13.33 | dyoung | I forgot once. So I had to pay the penalty twice. :-) |
| 12:13.42 | conradl | a nice slow 120 + 5 |
| 12:13.51 | conradl | 5 volts that was |
| 12:14.06 | odoc | ive alread paid plenty of penalty ... |
| 12:14.19 | odoc | first penalty was ... removing the ls244 out of the jtag cable ;P |
| 12:14.44 | odoc | i wish penalty in slug would only be 2 minutes like in hockey |
| 12:14.55 | rwhitby | conradl: hold off on my purchase, and keep the cable. ByronT is sending me a replacement. |
| 12:14.57 | dyoung | conradl: the 0-8V is probably the serial side? |
| 12:15.05 | conradl | ok? |
| 12:16.00 | conradl | yip that was a STd usb-serial with a pl2303 |
| 12:16.32 | dyoung | Aha. |
| 12:16.33 | dyoung | Okay. |
| 12:16.50 | conradl | i think i can re do it to 3V with a good light and clear head. and solder |
| 12:17.09 | dyoung | so if you want to use it with a nslu2 or dizzy, you'll need to tap into it before the MAX(3)232. |
| 12:17.32 | rwhitby | conradl: just keep the cable I sent |
| 12:17.55 | conradl | have got the sata drive ready to go to the car boot!.. am studying the std cable/ rods and the data sheet. |
| 12:20.31 | conradl | i think i will grab the max 3232 ics from nz and build a few kits. one each and a spare. |
| 12:28.40 | NAiL | anyone got bluetooth working with a broadcom (sigh) chipset? |
| 12:29.31 | NAiL | I got a free TeCom dongle |
| 12:29.44 | NAiL | Not that I have *anything* that can use bluetooth, but... I want it to work! ;) |
| 12:30.01 | dyoung | isnt all that stuff standarized? |
| 12:30.23 | rwhitby | NAiL: is it a usb dongle ? |
| 12:31.20 | rwhitby | one of these: http://www.mobilelinktech.com/shop/bluetooth/bt0ubtc100.php ? |
| 12:31.51 | rwhitby | you can probably run it in OpenSlug (see the BlueSlug wiki page) |
| 12:34.39 | NAiL | yes |
| 12:34.42 | NAiL | cool |
| 12:35.19 | *** join/#nslu2-linux malfi (n=malte@dsl-082-082-203-120.arcor-ip.net) |
| 12:51.17 | *** join/#nslu2-linux hannesr (n=user@ACB5D22F.ipt.aol.com) |
| 12:52.12 | *** join/#nslu2-linux eumel (n=chatzill@p54831783.dip0.t-ipconnect.de) |
| 13:02.26 | odoc | RedBoot> |
| 13:02.29 | odoc | slug is back online |
| 13:04.24 | rwhitby | congrats! |
| 13:04.52 | rwhitby | we didn't want to spoil our record ... |
| 13:05.12 | NAiL | rwhitby: no success with bluetooth |
| 13:05.31 | rwhitby | did the driver recognise the dongle ? |
| 13:05.44 | NAiL | Can't say that it looks like it |
| 13:08.29 | *** join/#nslu2-linux Tiersten_ (i=tman@nslu2-linux/Tiersten) |
| 13:08.52 | rwhitby | you may need BT_HCIBCM203X as a module ... |
| 13:09.49 | NAiL | which I guess is not compiled for 2.5-beta? |
| 13:17.24 | rwhitby | not unless you've checked in your defconfig changes ... |
| 13:18.08 | NAiL | heh :P |
| 13:18.49 | rwhitby | NAiL: this page (http://www.holtmann.org/linux/bluetooth/features.html) and the drivers/bluetooth/Kconfig file should get you working |
| 13:18.49 | NAiL | Ok, I'll fix that and check it in after my full build completes |
| 13:19.11 | rwhitby | feel free to just enable all the bluetooth modules ... |
| 13:19.15 | NAiL | aha.. I was at that page earlier. |
| 13:19.36 | NAiL | Didn't make much sense then. Not now either... but I guess it will ;) |
| 13:19.38 | rwhitby | well, at least all the USB-relevant ones |
| 13:20.33 | rwhitby | the FW_LOADER thingo worries me though ... |
| 13:20.49 | rwhitby | night all |
| 13:20.57 | NAiL | nite |
| 13:25.00 | *** join/#nslu2-linux mithro (n=tim@c213-100-42-188.swipnet.se) |
| 13:32.27 | odoc | slug is still not working |
| 13:32.35 | odoc | got "Kernel panic: VFS: Unable to mount root fs on 01:00" now |
| 13:32.43 | odoc | complete log: http://pastebin.com/350025 |
| 14:02.26 | *** join/#nslu2-linux yvasilev (n=yvasilev@201.135.158.15) |
| 14:09.28 | odoc | now im back to old-state |
| 14:09.33 | odoc | the nslu seg-faults :( |
| 14:24.53 | peteru-home | odoc: Perhaps you have bad flash? Looks like the compressed image may contain biterrors or be completely invalid. |
| 14:25.17 | peteru-home | maybe you need to getyourself a full copy of a known working flash. |
| 14:27.38 | odoc | have you seen the log ? |
| 14:27.53 | odoc | it boots like normal |
| 14:28.00 | odoc | but when i attach a usb drive |
| 14:28.02 | odoc | its all over |
| 14:28.34 | *** join/#nslu2-linux Matta (i=mnordstr@matta.ftlight.net) |
| 14:31.47 | NAiL | Am I the only one who can't resolve www.nslu2-linux.org? |
| 14:31.53 | NAiL | ah, there it came |
| 14:31.57 | NAiL | it took ages :P |
| 14:32.08 | mcdmx | what's the best method for crosscompiling ipkg? is there a unslung makefile target? |
| 14:43.54 | ka6sox-away | there is a master makefile with all the targets |
| 14:44.11 | ka6sox-away | http://www.nslu2-linux.org/Makefile |
| 14:44.50 | NAiL | ka6sox-away: what builds ipkg for nslu2 and wl500g? |
| 14:45.07 | NAiL | ka6sox-away: mcdmx is trying to crosscompile ipkg to use it on the ds101g+ |
| 14:45.27 | NAiL | Currently, I'm using the ipkg.sh script on my ds101... Would be nice to use the binary instead |
| 14:45.50 | ka6sox-away | optware-nslu2, optwart-wl500g |
| 14:46.16 | CIA-8 | 03koen 07org.openembedded.dev * rdeeec139... 10/packages/gaim/ (19 files in 2 dirs): gaim: update packages/gaim as per bug #273 |
| 14:46.18 | CIA-8 | 03koen 07org.openembedded.dev * r57a2e56a... 10/packages/gpe-session-scripts/gpe-session-scripts_0.65.bb: gpe-session-scripts 0.65: fix patch URI, closes bug #275 |
| 14:46.26 | ka6sox-away | optware-nslu2 would be the target |
| 14:46.55 | NAiL | ka6sox-away: yes, but what makefile builds the ipkg binary itself? |
| 14:46.56 | ka6sox-away | its also in the firmware image too. |
| 14:47.16 | ka6sox-away | its in all the images |
| 14:47.30 | NAiL | ka6sox-away: That won't help |
| 14:47.31 | mcdmx | there's no image yet for ds101* |
| 14:47.43 | NAiL | the ds101g+ is PPC, not armeb or mipsel |
| 14:47.52 | NAiL | so the images already done is useless |
| 14:47.58 | ka6sox-away | build the openslug-image and extract the file from the tmp files |
| 14:48.24 | ka6sox-away | wait...are we talking about g+ or just g? |
| 14:48.35 | NAiL | g+... there is no g |
| 14:48.44 | NAiL | there's one without a g |
| 14:48.58 | ka6sox-away | what is the target arch that he wants it built for? |
| 14:49.11 | NAiL | ppc |
| 14:49.19 | NAiL | dunno the specifics :P |
| 14:49.40 | NAiL | point is, we're both trying to figure out what actually builds it |
| 14:50.14 | ka6sox-away | the native one is built by the -image targets and is included in them . |
| 14:50.34 | ka6sox-away | there was also a ipkg in the feeds but that may have been removed. |
| 14:50.46 | NAiL | aha |
| 14:50.54 | NAiL | the latter is what I was looking for... |
| 14:51.14 | ka6sox-away | you would have to change the target arch and rebuild the -images |
| 14:51.25 | CIA-8 | 03florian 07org.openembedded.dev * r0b1e74a1... 10/packages/gpe-session-scripts/gpe-session-scripts_0.65.bb: gpe-session-scripts: Fix typo. |
| 14:51.27 | CIA-8 | 03koen 07org.openembedded.dev * r80321922... 10/conf/distro/preferred-gpe-versions-2.7.inc: preferred-gpe-versions-2.7.inc: update gpe-login and gpe-session-scripts |
| 14:51.41 | NAiL | We're trying to set up targets for both the ds101 and ds101g in the optware makefile |
| 14:52.10 | ka6sox-away | I believe we removed the ipkg target because it broke things. |
| 14:52.15 | NAiL | The ds101 target has a broken crosstool setup still, the ds101g is closer to actually working |
| 14:52.32 | ka6sox-away | so I do know its in the -image |
| 14:54.51 | ka6sox-away | NAiL, are you wanting to get it from optware instead of making it the OE way? |
| 14:55.54 | NAiL | ka6sox-away: for the "unslung" type feed, yes |
| 14:56.11 | NAiL | it's set up to use /opt and stuff already |
| 14:56.28 | ka6sox-away | does synology already have ipkg? |
| 14:56.47 | NAiL | no |
| 14:58.47 | ka6sox-away | bb ipkg* |
| 14:59.01 | ka6sox-away | after resetting the target and checking deps |
| 14:59.56 | NAiL | I'm not using OE at all for that.. |
| 15:00.11 | NAiL | I'm trying to get it to compile cross with a different glibc and gcc |
| 15:00.33 | ka6sox-away | you would have to build another CrossTool chain |
| 15:01.06 | mcdmx | at least for the g+ the toolchain is ready... |
| 15:02.03 | mcdmx | i have a ipkg for the g+ but i built it using handhelds.org cvs... I hoped that there would be an easier way... |
| 15:03.42 | ka6sox-away | mcdmx, until we establish a feed for g+ then it'll have to be manual. |
| 15:04.20 | NAiL | ka6sox-away: The feed should be up shortly |
| 15:04.24 | ka6sox-away | you could use the Makefile from optware for a template for building. |
| 15:05.00 | NAiL | ka6sox-away: I have the changes (from mcdmx) to the optware Makefile needed to add ds101g target |
| 15:05.17 | NAiL | but it doesn't build the ipkg stuff... it builds the toolchain and such |
| 15:08.10 | *** join/#nslu2-linux caplink811_log (n=caplink8@dsl-213-023-147-142.arcor-ip.net) |
| 15:08.49 | CIA-8 | 03orepvik * 10unslung/sources/crosstool/ (ds101-cross302.sh gcc-3.0.2-glibc-2.2.5.dat): Update binutils version for ds101 target |
| 15:10.08 | CIA-8 | 03orepvik * 10unslung/sources/crosstool/ (ds101g-cross334.sh powerpc-603e.dat): Added files needed for ds101g cross target |
| 15:10.56 | mcdmx | NAiL: tnx |
| 15:12.15 | mcdmx | I have fixed the optware dhcp makefile (invalid source url, no dhcpd.conf in /opt/etc). May I commit it? |
| 15:12.55 | CIA-8 | 03orepvik * 10unslung/make/crosstool.mk: Fix patches for ds101g target |
| 15:14.02 | CIA-8 | 03orepvik * 10unslung/Makefile: Add ds101g target to makefile |
| 15:14.54 | NAiL | mcdmx: We should set you up with cvs write access |
| 15:15.32 | mcdmx | NAiL: rwhitby already did this (despite my objections) ;-) |
| 15:15.49 | NAiL | aha, then I see no reason why you should not commit it ;) |
| 15:25.28 | CIA-8 | 03mcdmx * 10unslung/make/dhcp.mk: fixed invalid source URL, include sample dhcpd.conf in .ipk |
| 15:34.02 | mcdmx | NAiL: I'll try creating a make/ipkg.mk from scratch... |
| 15:35.11 | NAiL | mcdmx: cool |
| 15:35.30 | ka6sox-away | mcdmx, try to use the same version as in the slug so there is no confusion? |
| 15:35.49 | mcdmx | ka6sox-away: what is the version? |
| 15:36.22 | CIA-8 | 03mickeyl 07org.openembedded.dev * rfaeb226f... 10/ (packages/pcmcia-cs/pcmcia-cs-3.2.8/borzoi/ide.opts .mt-attrs): pcmcia: ship dedicated ide.opts for borzoi |
| 15:36.30 | ka6sox-away | hmm...let me check if I can |
| 15:40.27 | ka6sox-away | ipkg_0.99. |
| 15:40.43 | ka6sox-away | thats whats in OE |
| 15:40.54 | ka6sox-away | (and built into the images) |
| 15:41.29 | mcdmx | that's not precise enough... There are a lot of cvs tag containing 0.99: http://handhelds.org/cgi-bin/cvsweb.cgi/familiar/dist/ipkg/C/ |
| 15:42.05 | ka6sox-away | ipkg-0.99.148 |
| 15:42.16 | mcdmx | ok |
| 15:42.20 | ka6sox-away | that is what is in Unslung-5.5Beta |
| 15:47.39 | NAiL | heh |
| 15:47.52 | NAiL | samba gets a SIGABRT on a broken symlink... neat |
| 15:53.59 | *** join/#nslu2-linux ByronT-Away (i=ByronT@nslu2-linux/ByronT) |
| 16:46.08 | *** join/#nslu2-linux mithro (n=tim@c213-100-42-188.swipnet.se) |
| 17:39.52 | *** join/#nslu2-linux ByronT_ (i=ByronT@nslu2-linux/ByronT) |
| 17:41.48 | *** join/#nslu2-linux eno-away (n=eno-away@64.163.151.101) |
| 17:56.08 | CIA-8 | 03koen 07org.openembedded.dev * r1c3f5d84... 10/packages/tslib/ (tslib/ts.conf-h2200 tslib_cvs.bb): tslib: change ts.conf-h2200 to use module_raw for h2200 to include it in the calibration, bump PR |
| 18:00.13 | *** join/#nslu2-linux MooZ (n=mooz@213.245.132.85) |
| 18:02.24 | *** join/#nslu2-linux yvasilev (n=yvasilev@201.135.158.15) |
| 18:04.42 | odoc | as soon as i use the usb interface of my slug |
| 18:04.45 | odoc | it seg-fauls |
| 18:04.53 | odoc | with unslung and with openlug |
| 18:05.01 | odoc | stock linksys-fw doesn't even boot |
| 18:05.33 | odoc | since sercomm seems to validate the flashed area i don't expect a broken flash |
| 18:05.38 | odoc | any hints ? |
| 18:06.08 | CIA-8 | 03mickeyl 07org.openembedded.dev * rbf33034c... 10/conf/machine/zaurus-clamshell-2.6.conf: zaurus-clamshell-2.6.conf: revert accidant commit that outcommented several modules |
| 18:28.41 | *** join/#nslu2-linux twan (n=twan@46.109-201-80.adsl.skynet.be) |
| 18:31.07 | peteru-home | odoc: Inspect the board for shorted or damaged traces/pins. This really does sounds like a hardware issue. |
| 18:31.34 | peteru-home | you said you always had issues with that slug, right? |
| 18:32.15 | *** join/#nslu2-linux caplink811 (n=Joerg@dsl-213-023-147-142.arcor-ip.net) |
| 18:37.10 | odoc | yes |
| 18:37.38 | odoc | but i sorted out that these are real issues after adding serial |
| 18:38.07 | odoc | maybe damaged ram ? |
| 18:39.30 | peteru-home | Hard to tell. Probably easiest to just get a new slug :( |
| 18:40.27 | odoc | already got a new one |
| 18:40.36 | odoc | but the "old" one is only about one montg |
| 18:40.37 | odoc | h |
| 18:40.42 | odoc | anyway ... gn8 |
| 18:41.36 | CIA-8 | 03justinp 07org.openembedded.dev * r8457b71b... 10/packages/musicpd/ (glurp_0.11.3.bb glurp_0.11.6.bb): glurp: update version, switch to SF mirror |
| 18:53.24 | *** join/#nslu2-linux jp30 (n=jp30@nslu2-linux/jp30) |
| 18:54.20 | *** join/#nslu2-linux mcdmx (n=mcdmx@84-73-8-165.dclient.hispeed.ch) |
| 19:26.07 | CIA-8 | 03rpurdie 07org.openembedded.dev * r6332ba3a... 10/packages/linux/linux-openzaurus_2.6.13-rc5-mm1.bb: linux-oz-2.6: Update detection routines to correctly detect corgi and shepherd. Very nasty to get this wrongMT: ---------------------------------------------------------------------- |
| 19:50.24 | CIA-8 | 03jp30 * 10unslung/Makefile: force PATH to a working value when native building on an nslu2; re-promote asterisk |
| 19:56.39 | *** join/#nslu2-linux mcdmx (n=mcdmx@84-73-8-165.dclient.hispeed.ch) |
| 20:16.57 | *** join/#nslu2-linux mcdmx (n=mcdmx@84-73-8-165.dclient.hispeed.ch) |
| 21:06.12 | CIA-8 | 03hrw 07org.openembedded.dev * r080cfc56... 10/conf/machine/zaurus-clamshell-2.6.conf: fixed typo in conf/zaurus-clamshell-2.6.conf |
| 21:06.15 | CIA-8 | 03hrw 07org.openembedded.dev * r0cce57df... 10/packages/ttf-fonts/ttf-dejavu_1.13-20050820.bb: ttf-dejavu: archive mirrored on my account on handhelds.org - close bug#272 |
| 21:06.17 | CIA-8 | 03koen 07org.openembedded.dev * r8fc2532e... 10/packages/gpesyncd/gpesyncd_cvs.bb: |
| 21:06.17 | CIA-8 | gpesyncd: add cvs version of gpesyncd till it sees a release |
| 21:06.17 | CIA-8 | NOTE: it needs libmimedir_cvs, but OE doesn't have a clean way to specify that |
| 21:06.17 | CIA-8 | ~lart OE |
| 21:07.55 | NAiL | heh |
| 21:09.20 | *** join/#nslu2-linux odoc (i=odoc@is.borntobooze.de) |
| 21:11.03 | CIA-8 | 03nail 07org.openembedded.dev * r7241b1d9... 10/packages/postfix/postfix_2.0.20.bb: Fix hardcoded paths, and create dirs in image before trying to copy files there |
| 21:26.32 | NAiL | ok, does reiser4progs fail for anyone else? |
| 21:29.49 | NAiL | nm.. didn't happen twice... odd |
| 21:43.55 | NAiL | weather ~enva |
| 22:06.07 | CIA-8 | 03nail 07org.openembedded.dev * r104db762... 10/packages/wakelan/wakelan_1.1.bb: Fix hardcoded path trying to set permissions on /usr/bin/ |
| 22:23.54 | *** join/#nslu2-linux ByronT (n=byron-po@nslu2-linux/ByronT) |
| 22:46.02 | *** part/#nslu2-linux odoc (i=odoc@is.borntobooze.de) |
| 22:47.39 | peteru-home | ~weather YSSD |
| 22:48.27 | NAiL | ~weather enva |
| 22:50.31 | peteru-home | ~weather YSSY |
| 22:52.33 | *** join/#nslu2-linux odoc (i=odoc@is.borntobooze.de) |
| 22:53.04 | peteru-home | Nice, already at 18 C before 9am and it's middle of winter. |
| 23:08.48 | *** join/#nslu2-linux malfimalfi (n=malte@dsl-082-082-193-096.arcor-ip.net) |
| 23:22.06 | *** join/#nslu2-linux conradl (n=abuse@dsl-215.3.240.220.rns01-kent-syd.dsl.comindico.com.au) |
| 23:22.33 | *** part/#nslu2-linux odoc (i=odoc@is.borntobooze.de) |
| 23:51.03 | CIA-8 | 03nail 07org.openembedded.dev * r13c59a81... 10/packages/bluez-utils/bluez-utils-common_2.18.inc: Add support for the broadcom firmware loader |
| 23:55.59 | CIA-8 | 03nail 07org.openembedded.dev * rcde1c3e7... 10/packages/linux/openslug-kernel-2.6.12.2/defconfig: Add broadcom bluetooth module to openslug-kernel |
| 23:56.02 | CIA-8 | 03nail 07org.openembedded.dev * ra13ce7ef... 10/packages/linux/nslu2-kernel_2.6.12.2.bb: Bump PR |
| 23:56.24 | rwhitby-away | NAiL: nice |
| 23:59.56 | NAiL | It's not working quite yet though.. Still got problems loading the darn firmware |