| 00:34.03 | CIA-8 | 03jbowler 07org.openembedded.nslu2-linux * r3e52cc02... 10/packages/linux/ (5 files in 2 dirs): |
| 00:34.03 | CIA-8 | Fix for the hardware reset hang problem - shut down the flash memory |
| 00:34.03 | CIA-8 | device (ensure it is in read mode, not write) on halt/reboot. |
| 00:35.30 | jbowler | The two lines for info->mtd are still commented out. It's clear from the code that if something deletes the info->mtd stuff the driver will fail, so presumably that's what happens. |
| 00:49.13 | CIA-8 | 03jbowler 07org.openembedded.nslu2-linux * rb61dbb4f... 10/packages/ (33 files in 19 dirs): |
| 00:49.14 | CIA-8 | propagate from branch 'org.openembedded.dev' (head 905c8d454a8f78a32652b51edb7d9fc32edc640b) |
| 00:49.14 | CIA-8 | <PROTECTED> |
| 01:06.56 | jbowler | I need to fix 197 before a binary release. |
| 01:09.03 | CIA-8 | 03jbowler 07org.openembedded.nslu2-linux * r78d702d0... 10/packages/ (meta/openslug-packages.bb util-linux/util-linux.inc): |
| 01:09.03 | CIA-8 | Work round ccache/timestamp problem in util-linux caused by a machine |
| 01:09.03 | CIA-8 | generated .c seeming to be newer than the .o generated from it (cause by |
| 01:09.03 | CIA-8 | fine granularity make timestamps apparently). |
| 01:28.15 | *** join/#nslu2-linux rwhitby-web (www-data@netblock-66-159-209-60.dslextreme.com) |
| 01:35.05 | *** join/#nslu2-linux VoodooZ (~stephane6@CPE00c0f021712c-CM014110003785.cpe.net.cable.rogers.com) |
| 01:52.04 | *** join/#nslu2-linux grimreap (~grimreap@c-67-165-167-67.hsd1.il.comcast.net) |
| 01:57.34 | rwhitby-web | monotone 0.21 is out |
| 01:58.29 | jacques | hmm, is it compatible with 0.20 ? |
| 01:58.51 | dyoung | Nope |
| 01:59.27 | dyoung | upgrade from 0,20: you need to run db migrate against each database |
| 02:00.16 | jacques | maybe we can console ourselves that we are helping monotone mature by actually using it |
| 02:01.31 | ByronT-Away | some consolation |
| 02:02.00 | dyoung | Hey ByronT-Away I was just gossiping about you. |
| 02:02.04 | Tiersten | Oh FFS |
| 02:02.17 | ByronT-Away | what have I done or not done now? |
| 02:02.19 | ByronT-Away | :) |
| 02:02.19 | dyoung | have you plugged your Harmony 880 into the slug yet? |
| 02:02.26 | ByronT-Away | should I? |
| 02:02.30 | [g2] | jbowler, hey.... |
| 02:03.21 | [g2] | sorry, guests arrived before.... |
| 02:03.33 | [g2] | they're gone now |
| 02:03.42 | dyoung | I dunno, was just wonder ing if you did or not |
| 02:04.38 | rwhitby-web | monotone.nslu2-linux.org has been updated to 0.21 (not that it matters, cause the netsync protocol hasn't changed) |
| 02:05.16 | [g2] | the the .20 db I pulled a couple hours ago isn't any good any ? |
| 02:05.25 | VoodooZ | so I should upgrade my box to 0.21 then right? |
| 02:05.28 | rwhitby-web | can someone test a pull from nslu2-linux? |
| 02:06.02 | rwhitby-web | everyone should upgrade. You run "monotone db migrate" to update your local database - it just adds a few more sql indexes to speed things up |
| 02:06.04 | dyoung | working |
| 02:06.05 | [g2] | I emerged today and it was 20 |
| 02:06.27 | rwhitby-web | note that you don't have to upgrade, unless you want to remain slow :-) |
| 02:06.38 | rwhitby-web | s/unless/if/ |
| 02:07.08 | ByronT-Away | dyoung, I'll hook it up to FrankenSlug later - he's down atm, and ProdSlug doesn't have serial |
| 02:07.37 | dyoung | I'm pulling with 0.20. |
| 02:07.43 | dyoung | to verify it works. |
| 02:07.49 | VoodooZ | cool. I'll do it as I'm stuck with weird errors anyways at 0.19. |
| 02:07.54 | dyoung | I'll try it with 0.21 if it ever finishes. |
| 02:08.10 | dyoung | VoodooZ, you cannot use 0.19 from monotone.nslu2-linux.org |
| 02:08.14 | jbowler | Ooh, did they fix the apparent n^2 check the revisions issue? |
| 02:08.24 | dyoung | the version of netsync changed between 0.19 and 0.20/ |
| 02:08.29 | Tiersten | VoodooZ: We switched to 0.20 recently and it's not compatible with < 0.20 |
| 02:09.33 | jbowler | OOh, --exclude on branches, goodbye zecke... |
| 02:09.51 | VoodooZ | I know. that's not what I was saying. I had problems last week so I'm just glad we're going to 0.21 |
| 02:12.21 | dyoung | 35 revs, just finished. |
| 02:12.32 | dyoung | so it worked from a local 0.20 |
| 02:12.39 | dyoung | now to upgrade to 0.21 |
| 02:15.22 | jbowler | The 0.20 patches still work... |
| 02:16.46 | jbowler | But they're trying to run a test program from configure... |
| 02:18.14 | [g2] | jbowler, so iounmap wasnt' getting called ? |
| 02:18.52 | jbowler | I don't know - the version I checked in has the iounmap stuff and works. |
| 02:22.21 | [g2] | jbowler COOL, congrats! |
| 02:22.26 | [g2] | that's a big fix |
| 02:22.48 | jbowler | Try removing the #if 0 and seeing what the kernel oops is... |
| 02:23.05 | jbowler | I can't get it because it happens after syslogd has been killed. |
| 02:23.35 | jacques | huh? jbowler fixed openslug reboot? |
| 02:24.11 | dyoung | we fixed the two "big" bigs over the last 2 days. |
| 02:24.39 | [g2] | dyoung, what was the other ? |
| 02:24.47 | dyoung | serial |
| 02:24.51 | dyoung | console |
| 02:24.55 | jacques | what?? that's fixed too? |
| 02:24.57 | [g2] | heh |
| 02:25.07 | jacques | you guys are amazing (as usual) |
| 02:25.47 | [g2] | moving ? |
| 02:26.03 | jacques | my lease is up, owner is going to sell house, I gotta be out by end of august |
| 02:26.17 | jacques | so I probably won't stay in this area |
| 02:26.49 | dyoung | Wow, thats kind of a bummer eh? Didnt you just kind of get settled sorta recently? |
| 02:27.24 | dyoung | Wow, that *is* fast. |
| 02:27.54 | dyoung | 0.21 is a good move. |
| 02:28.04 | jacques | dyoung, yeah |
| 02:30.58 | VoodooZ | darn. Fedora core4 repos don't have monotone 0.21 yet. |
| 02:31.11 | VoodooZ | I know! I'm lazy! |
| 02:31.43 | [g2] | jacques, the tarball appears to be building for me |
| 02:31.56 | [g2] | I had just emerged 20 today |
| 02:32.03 | [g2] | and pulled my first db |
| 02:36.23 | [g2] | jacques, 21 build just fine from the tarball |
| 02:39.55 | VoodooZ | ok. Just to make sure: I just installed monotone 0.21 on my machine. I had 0.19 client/db before. do I do the "monotone db migrate" step anyways? |
| 02:40.28 | dyoung | Yes |
| 02:41.44 | VoodooZ | thanks |
| 02:58.50 | jacques | so damn hot |
| 02:58.57 | jacques | ~weather kcov |
| 02:58.58 | VoodooZ | same here! |
| 02:59.03 | jacques | ~weather kcvo |
| 02:59.20 | VoodooZ | there was fog on the ice while playing hockey earlier!! |
| 02:59.25 | jacques | was 97F before |
| 02:59.34 | VoodooZ | what's that in degrees C? |
| 03:00.07 | jacques | (97 f = 36.111111 c) |
| 03:00.09 | VoodooZ | with humidex it feels like 34 celsius here and it's 11pm! |
| 03:00.14 | VoodooZ | ouch! |
| 03:00.24 | jacques | it's 8pm here |
| 03:00.41 | VoodooZ | hot! |
| 03:01.01 | VoodooZ | we had rain last night so I'm surprise the humidity didn't go away more. |
| 03:02.22 | VoodooZ | is it normal that "monotone db migrate" returned after a few seconds with no messages? |
| 03:03.14 | VoodooZ | nothing changed with the Makefile either? I can just do make update? |
| 03:03.29 | VoodooZ | I have to make sure as I always manage to screw things up! |
| 03:07.01 | VoodooZ | I get: monotone: misuse: no branch pattern given and no default pattern set |
| 03:08.28 | dyoung | monotone -d monotone/nslu2-linux.db pull monotone.nslu2-linux.org |
| 03:08.28 | dyoung | org.openembedded.* org.nslu2-linux.* |
| 03:08.40 | dyoung | http://groups.yahoo.com/group/nslu2-linux/message/7488 |
| 03:09.51 | VoodooZ | thanks dyoung |
| 03:10.21 | VoodooZ | Sorry for not reading the list. I should start reaading more often |
| 03:10.58 | dyoung | np |
| 03:17.38 | VoodooZ | it's a long process. |
| 03:24.47 | [g2] | how long does the verify take with the monoton 21 dl ? |
| 03:24.53 | CIA-8 | 03bzhou * 10unslung/make/monotone.mk: upstream upgrade from 0.21 to 0.20 |
| 03:26.36 | VoodooZ | night |
| 03:46.09 | [g2] | how many revs need to be written on the verify ? |
| 03:46.19 | [g2] | for the monotone pull ? |
| 04:05.16 | eno | my guess is the same as "revs in", i'm actually 100/301 right now |
| 04:05.20 | jbowler | About 5550 |
| 04:05.24 | jbowler | Sorry, 550 |
| 04:06.48 | jbowler | revs written often seems to be less than revs in. |
| 04:07.03 | eno | i c |
| 04:08.02 | [g2] | jbowler, thx |
| 04:08.17 | [g2] | doh.... only at 378 |
| 04:10.05 | [g2] | nite all |
| 04:10.30 | [g2] | The fresh pull should have a clean build early tomorrow |
| 04:28.16 | *** part/#nslu2-linux rwhitby-web (www-data@rwhitby.nslu2-linux) |
| 04:45.22 | eno | i'm trying to get familar with openslug package structure, i guess oe-symlinks/packages/ got all the packages ported, but how can i tell native package from cross package? |
| 04:49.15 | *** join/#nslu2-linux [cc]smart (~smart@gw.ptr-62-65-149-158.customer.ch.netstream.com) |
| 05:22.48 | CIA-8 | 03bzhou * 10unslung/ (make/cogito.mk sources/cogito/Makefile.patch): upstream upgrade from 0.12 to 0.12.1 |
| 06:55.56 | *** join/#nslu2-linux grimreap (~grimreap@c-67-165-167-67.hsd1.il.comcast.net) |
| 07:11.00 | *** join/#nslu2-linux kolla__ (kolla@firda.uninett.no) |
| 07:37.46 | *** join/#nslu2-linux eno-away (~eno-away@adsl-64-164-0-198.dsl.snfc21.pacbell.net) |
| 08:17.40 | *** join/#nslu2-linux Tuborg (~Tuborg@82.196.218.151) |
| 08:17.56 | Tuborg | Hi;) |
| 08:19.14 | Tuborg | I did a pull from source, but the patching of gnu-config fails. Is it me or can I force the patch? |
| 08:19.43 | Tuborg | NOTE: package gnu-config-0.1cvs20050715-r3: task do_patch: started |
| 08:19.52 | Tuborg | NOTE: Applying patch 'config-guess-uclibc.patch' |
| 08:20.02 | Tuborg | ERROR: function do_patchcmd failed |
| 08:20.19 | Tuborg | 1 out of 7 hunks FAILED -- rejects in file config.guess |
| 08:20.47 | Tuborg | ? |
| 08:24.34 | Tuborg | Everyone is sleeping;) |
| 08:25.36 | NAiL | nah |
| 08:25.55 | NAiL | I thought that the cvsdate on gnu-config was fixed by now |
| 08:28.20 | Tuborg | Hei NAil, what date should the cvs pull be? |
| 08:28.20 | dyoung | what did you pull |
| 08:28.20 | Tuborg | cvs20050715 |
| 08:28.32 | Tuborg | NOTE: package gnu-config-0.1cvs20050715-r3 |
| 08:28.42 | dyoung | what did you pull from? |
| 08:28.48 | dyoung | ie: what are you working with? |
| 08:28.56 | NAiL | 0713 works |
| 08:29.18 | NAiL | And I thought that was locked in a config file two days ago or so |
| 08:29.52 | Tuborg | monotone: connecting to monotone.nslu2-linux.org |
| 08:30.35 | Tuborg | I also get this from monotone.nslu2-linux.org: monotone: warning: caught bad_decode exception decoding input from peer monotone.nslu2-linux.org: 'protocol version mismatch: wanted '4' got '5'' |
| 08:30.44 | Tuborg | I'm running 0.19 |
| 08:30.46 | dyoung | Oh, thats probably the root cause |
| 08:30.51 | Tuborg | monotone |
| 08:30.55 | dyoung | you need to be running 0.20 or higher. |
| 08:31.27 | dyoung | http://groups.yahoo.com/group/nslu2-linux/message/7488 |
| 08:32.06 | Tuborg | brr, last friday it was: You need to run 0.19.... (รถ) |
| 08:34.46 | dyoung | sorry for the sudden changes, monotone is very dynamic right now. |
| 08:35.12 | dyoung | upstream changed to 0.20 last friday so we had to also. |
| 08:38.30 | Tuborg | No prop. Not cause of your action => upstream. I'm just started to hack on the nslug, so I'm happy for whatever help I can get here;) |
| 08:39.36 | Tuborg | There is 0.20 working. Now lets se if I can build this slug... |
| 08:43.28 | Tuborg | Now the monotone does not complain, but I still get the gnu-config patch error..... |
| 08:50.26 | NAiL | openembedded/conf/machine/nslu2.conf:CVSDATE_gnu-config ?= "20050713" |
| 08:50.41 | NAiL | Do you have that one? |
| 08:52.19 | Tuborg | CVSDATE_gnu-config-native ?= "20050616" |
| 08:56.10 | Tuborg | Der ja! |
| 08:56.21 | Tuborg | Now its compilin;) |
| 09:05.35 | *** join/#nslu2-linux bwalle (~bwalle@p5491A1A5.dip0.t-ipconnect.de) |
| 09:06.25 | Tuborg | NOTE: package gnu-config-0.1cvs20050718-r3: task do_patch: started |
| 09:06.43 | Tuborg | Same shit new date.. |
| 09:07.47 | NAiL | yup, same fix new wrapping :-P |
| 09:08.03 | NAiL | set it to 0707 instead then |
| 09:08.10 | Tuborg | k |
| 09:09.34 | NAiL | ah |
| 09:09.39 | NAiL | first one was native |
| 09:09.56 | NAiL | CVSDATE_gnu-config-native and CVSDATE_gnu-config |
| 09:10.58 | Tuborg | damn I missed that detail...:D |
| 09:12.33 | *** join/#nslu2-linux odoc (~odoc@d024164.adsl.hansenet.de) |
| 09:16.59 | *** join/#nslu2-linux grimreap (~grimreap@c-67-165-167-67.hsd1.il.comcast.net) |
| 09:18.10 | *** join/#nslu2-linux Ksilebo (russ@d14-69-132-59.try.wideopenwest.com) |
| 09:20.44 | Tuborg | NOTE: Task failed: Fetch failed: ftp://lsof.itap.purdue.edu/pub/tools/unix/lsof/lsof_4.75.tar.bz2 |
| 09:20.56 | Tuborg | Error in server greeting |
| 09:21.17 | Tuborg | Is it possible to speciify a mirror? |
| 09:23.43 | NAiL | hmm |
| 09:23.47 | NAiL | I'm getting that one just fine |
| 09:24.10 | NAiL | what version of wget do you havE? |
| 09:24.52 | Tuborg | GNU Wget 1.9+cvs-stable (Red Hat modified) |
| 09:25.41 | Tuborg | hmm |
| 09:26.22 | NAiL | GNU Wget 1.10 |
| 09:29.08 | kolla_ | (Red Hat crippled) :) |
| 09:33.32 | Tuborg | hehe |
| 09:34.12 | Tuborg | same shit with 1.10. Is it possible to download manually? |
| 09:34.50 | NAiL | http://osx.kynisk.com/lsof_4.75.tar.bz2 |
| 09:38.40 | NAiL | You should be able to get it from there and put it in your download dir |
| 09:42.24 | Tuborg | yupp I figured out that one..trying |
| 09:44.08 | *** join/#nslu2-linux Ksilebo (russ@d14-69-132-59.try.wideopenwest.com) |
| 09:55.35 | Tuborg | lsof.itap.purdue.edu uses reverse DNS lookups. Thats why it fails for me.. |
| 10:03.09 | *** join/#nslu2-linux Obelisk (~russ@d14-69-132-59.try.wideopenwest.com) |
| 10:14.56 | CIA-8 | 03dyoung 07org.nslu2-linux.dev * r7ee0a4b1... 10/Makefile: Add misc other developer related targets |
| 10:15.01 | CIA-8 | 03jbowler 07org.openembedded.nslu2-linux * refd8c005... 10/packages/monotone/ (4 files in 2 dirs): monotone 0.21 and associated patches |
| 10:17.32 | dyoung | ciabot database migrated. |
| 10:21.36 | *** join/#nslu2-linux Ksilebo (russ@d14-69-132-59.try.wideopenwest.com) |
| 11:20.06 | CIA-8 | 03rwhitby * 10unslung/make/ftpd-topfield.mk: Removed the turbo patch at the upstream package author's request. |
| 11:29.02 | CIA-8 | 03rwhitby 07org.openembedded.nslu2-linux * ra0622c3b... 10/packages/ftpd-topfield/ (files/init ftpd-topfield_0.5.1.bb): Updated the ftpd-topfield init script to match the Optware version |
| 11:52.31 | *** join/#nslu2-linux hanjo (~wsntestbe@tklabsrv.tkn.TU-Berlin.DE) |
| 11:56.45 | *** join/#nslu2-linux Jacmet (~jacmet@50C59F0E.flatrate.dk) |
| 11:59.52 | CIA-8 | 03rwhitby 07org.openembedded.nslu2-linux * re74c7357... 10/packages/ftpd-topfield/ (ftpd-topfield_0.5.1.bb ftpd-topfield_0.5.2.bb): Updated ftpd-topfield to version 0.5.2 |
| 12:22.18 | *** join/#nslu2-linux grimreap (~grimreap@c-67-165-167-67.hsd1.il.comcast.net) |
| 12:23.28 | *** join/#nslu2-linux senneth (senneth@senneth.staff.irssi) |
| 12:28.49 | *** join/#nslu2-linux zin (~root@60.48.102.126) |
| 12:33.14 | *** join/#nslu2-linux VoodooZ (~VoodooZ@CPE00c0f021712c-CM014110003785.cpe.net.cable.rogers.com) |
| 12:33.40 | VoodooZ | damn proxy died on me. That mean I have no logs. |
| 12:37.07 | hanjo | is there a way to extract the current log from jbot or whatever bot is used for the web archives? |
| 12:39.23 | VoodooZ | There are logs kept online but they usually don't have access to the last 12 hours or so. |
| 12:39.30 | VoodooZ | Until the next day that is. |
| 12:40.36 | VoodooZ | jbowler, do you still get merge issues with monotone 0.21? It's complaining about packages/install/files/install-sh. Just wondering... |
| 12:46.44 | *** join/#nslu2-linux zin_ (~root@60.48.100.226) |
| 12:49.00 | *** join/#nslu2-linux zin_ (~administr@60.48.100.226) |
| 13:02.48 | *** join/#nslu2-linux llagendijk (~louis@lagendijk.xs4all.nl) |
| 13:03.54 | Tuborg | NOTE: build 200507181506: completed |
| 13:03.58 | *** join/#nslu2-linux VoodooZ (~VoodooZ@CPE00c0f021712c-CM014110003785.cpe.net.cable.rogers.com) |
| 13:04.00 | Tuborg | At last;) |
| 13:24.54 | *** join/#nslu2-linux caplink811-log (~caplink81@dsl-213-023-136-232.arcor-ip.net) |
| 13:25.02 | *** join/#nslu2-linux [g2] (~g2@g2.nslu2-linux) |
| 14:38.08 | jbowler | VoodooZ_Work: the install-sh change was earlier (a day? before the monotone one). Probably you are seeing the same issues as before - I believe I'm the only person to have touched install-sh or montone 0.21 (but mickely touched the other monotone stuff). |
| 14:39.38 | VoodooZ_Work | ok. thanks. |
| 14:40.01 | VoodooZ_Work | I did merge it as good as I could and a few other ones and everything appear fines now. |
| 14:48.51 | jbowler | monotone will now invoke kdiff3 by default (as of 0.20) - that is a lot easier to use. |
| 14:54.48 | VoodooZ_Work | cool. |
| 14:55.12 | VoodooZ_Work | unfortunately I can't seem to find it for fedora core4. |
| 15:06.34 | *** part/#nslu2-linux hanjo (~wsntestbe@tklabsrv.tkn.TU-Berlin.DE) |
| 15:16.31 | *** join/#nslu2-linux kitno455 (~man@tfhs.net) |
| 15:19.14 | kitno455 | re all |
| 15:19.26 | kitno455 | DaKa2, ping |
| 15:20.25 | DaKa2 | kitno455: pong |
| 15:21.03 | kitno455 | ran sane on openslug last night for first time |
| 15:21.21 | DaKa2 | :) |
| 15:21.24 | DaKa2 | it worked? |
| 15:21.24 | kitno455 | seems to work ok for fujitsu |
| 15:21.37 | kitno455 | i was using an unsupported scanner, but it did talk to it |
| 15:21.46 | *** join/#nslu2-linux kolla_ (kolla@firda.kolla.no) |
| 15:22.13 | kitno455 | did not have any others to try at the time |
| 15:24.46 | VoodooZ_Work | anybody know of a cheap USB sound card (I mean basic mic/output not 5.1!) supported under linux? |
| 15:25.32 | kitno455 | your robot gonna talk now? |
| 15:28.23 | VoodooZ_Work | maybe! |
| 15:28.42 | VoodooZ_Work | although I was looking at using the mic in more. |
| 15:30.30 | kolla_ | hehe.. activate speak console |
| 15:31.33 | VoodooZ_Work | hehehe. I can't really do speech recognition though. The poor slug wouldn't be too happy! :) |
| 15:32.26 | VoodooZ_Work | but basic sound output would be cool. I already use the piezo buzzer for basic sound though. |
| 15:32.58 | kitno455 | it could play neat sound clips before it rushes into the burning building.... |
| 15:33.10 | kitno455 | 'dont jump, ill save you' |
| 15:38.05 | VoodooZ_Work | hehehe. |
| 15:38.14 | VoodooZ_Work | You have way more imagination than i do! :) |
| 15:38.37 | VoodooZ_Work | or mimic a firetruck's siren! |
| 15:40.02 | kitno455 | it could call out instructions to crawl, block bottom of doors, etc |
| 15:40.10 | VoodooZ_Work | hehehe |
| 15:40.33 | kitno455 | you could even use sound to find victims, though a fire is a noisy thing |
| 15:40.58 | VoodooZ_Work | well, the competition is not that advanced quite yet! |
| 15:41.24 | VoodooZ_Work | but it would be nice to call out when the robot has found the rescued doll. |
| 15:41.31 | kitno455 | you said you did not compete this year? |
| 15:42.04 | VoodooZ_Work | no, because I didn't planned the whole slug thing so I "wasted" too much time to get it working. All fun though. |
| 15:42.13 | VoodooZ_Work | I'm better in the long run. |
| 15:42.47 | kitno455 | perhaps more applicable to 'real life' work. |
| 15:43.08 | kitno455 | oh, and your idea about a page on folks that have burned slugs- i got you beat :) |
| 15:43.47 | VoodooZ_Work | really? How? |
| 15:43.55 | VoodooZ_Work | You burned a whole slug? |
| 15:44.04 | kitno455 | with a torch :) |
| 15:44.07 | VoodooZ_Work | hehehe |
| 15:44.13 | kitno455 | salted slug |
| 15:44.33 | VoodooZ_Work | damn! I can't win! ;) |
| 15:45.10 | kitno455 | i guess the openjtag guys were able to follow some of the traces and unlock the speed using my scans |
| 15:45.29 | VoodooZ_Work | oh yeah! I remember who you are now! :) |
| 15:45.32 | kitno455 | hahah |
| 15:45.41 | VoodooZ_Work | thanks again for burning that thing! |
| 15:45.48 | kitno455 | no biggy |
| 15:45.59 | kitno455 | solder does not stick to pergo fortunately |
| 15:46.06 | *** join/#nslu2-linux grimreap (~grimreap@c-67-165-167-67.hsd1.il.comcast.net) |
| 15:46.54 | kitno455 | i cant seem to build montone .20 |
| 15:47.13 | VoodooZ_Work | I think we moved to 0.21 anyways. |
| 15:47.17 | kitno455 | shit |
| 15:47.25 | kitno455 | your kidding? |
| 15:47.29 | kitno455 | you're |
| 15:47.30 | VoodooZ_Work | I took the binary on their page as fedora core4 didn't have a package for it yet |
| 15:47.33 | VoodooZ_Work | nope. |
| 15:47.40 | kitno455 | i am using fc2 |
| 15:47.46 | VoodooZ_Work | cool |
| 15:47.55 | kitno455 | i built .18 from source ok |
| 15:48.09 | kitno455 | i wonder if it needs a later version of boost |
| 15:48.14 | VoodooZ_Work | I didn't bother because I have yum! |
| 15:48.26 | VoodooZ_Work | no idea. |
| 15:48.37 | kitno455 | could not find fc2 rpm anywhere |
| 15:48.38 | VoodooZ_Work | thus why I take binary. |
| 15:48.52 | VoodooZ_Work | shouldn't be that different than fc3 or 4 no? |
| 15:49.14 | kitno455 | dont know. monotone 0.18 rpm segfaults |
| 15:50.01 | VoodooZ_Work | I think i had similar problems so I decided not to bother anymore. |
| 15:50.08 | VoodooZ_Work | Just download the 0.21 binary on the monotone page. |
| 15:50.19 | kitno455 | you used binary, not prm? |
| 15:50.39 | VoodooZ_Work | yep. |
| 15:51.00 | VoodooZ_Work | I don't usually do that but It's a single executable file so it's not too bad. |
| 15:51.24 | VoodooZ_Work | this way once newer versions come out in package it will simply be overwritten. |
| 15:51.59 | kitno455 | weird, it is a single file |
| 15:52.12 | VoodooZ_Work | I like it. easier |
| 15:52.42 | VoodooZ_Work | Don't forget to migrate your DB though. check the yahoo group for message that explains how. |
| 15:52.48 | kitno455 | what do i have to do to my monotone db? |
| 15:52.52 | kitno455 | hahah |
| 15:52.57 | kitno455 | we think alike |
| 15:53.02 | VoodooZ_Work | check nslu2-linux yahoo group. |
| 15:53.09 | kitno455 | i saved mail |
| 15:53.49 | VoodooZ_Work | hehe |
| 15:54.18 | kitno455 | i have way too much slug stuff in my inbox.... |
| 15:55.14 | kitno455 | nope- instructions dont work |
| 15:55.41 | kitno455 | "try migrating database" |
| 16:00.27 | VoodooZ_Work | lunch time for me. I'm dying of hunger. |
| 16:00.27 | VoodooZ_Work | later |
| 16:00.30 | *** join/#nslu2-linux perlguru (~mirc@cc444495-a.hnglo1.ov.home.nl) |
| 16:00.34 | kitno455 | right |
| 16:05.33 | *** join/#nslu2-linux ByronT (ByronT@ByronT.nslu2-linux) |
| 16:23.31 | *** join/#nslu2-linux macsat (~macsat@0x535b9779.arcnxe1.adsl-dhcp.tele.dk) |
| 16:34.23 | macsat | Hi |
| 16:34.57 | kitno455 | hi |
| 16:35.12 | NAiL | hei ;) |
| 16:35.51 | kitno455 | that is hello in .dk? |
| 16:36.21 | NAiL | Not quite sure if .dk uses "j" or "i", but it's close enough anyway |
| 16:37.10 | kitno455 | NAiL, you write the .bb for libsane? |
| 16:37.33 | NAiL | kitno455: no, DaKa2 did, IIRC |
| 16:37.51 | kitno455 | ok. has your name at top. thats what i was trying to figure out. |
| 16:38.11 | NAiL | yeah, I committed it |
| 16:38.39 | macsat | .dk uses "j" :-) |
| 16:38.42 | NAiL | DaKa declined to be maintainer, so I put myself in |
| 16:38.46 | macsat | hei sounds Norwegian |
| 16:39.04 | NAiL | That might be because I am norwegian perhaps :-P |
| 16:42.15 | macsat | might be :) |
| 16:44.10 | DaKa2 | kitno455: any problems with the libsane bb? |
| 16:52.11 | *** join/#nslu2-linux ChanServ (ChanServ@services.) |
| 16:52.11 | *** join/#nslu2-linux macsat (~macsat@0x535b9779.arcnxe1.adsl-dhcp.tele.dk) [NETSPLIT VICTIM] |
| 16:52.11 | *** join/#nslu2-linux ByronT (ByronT@ByronT.nslu2-linux) |
| 16:52.11 | *** join/#nslu2-linux perlguru (~mirc@cc444495-a.hnglo1.ov.home.nl) [NETSPLIT VICTIM] |
| 16:52.11 | *** join/#nslu2-linux grimreap (~grimreap@c-67-165-167-67.hsd1.il.comcast.net) [NETSPLIT VICTIM] |
| 16:52.11 | *** join/#nslu2-linux kolla_ (kolla@firda.kolla.no) [NETSPLIT VICTIM] |
| 16:52.12 | *** join/#nslu2-linux kitno455 (~man@tfhs.net) [NETSPLIT VICTIM] |
| 16:52.12 | *** join/#nslu2-linux [g2] (~g2@g2.nslu2-linux) |
| 16:52.12 | *** join/#nslu2-linux caplink811_log (~caplink81@dsl-213-023-136-232.arcor-ip.net) [NETSPLIT VICTIM] |
| 16:52.12 | *** join/#nslu2-linux VoodooZ_Work (~VoodooZ@CPE00c0f021712c-CM014110003785.cpe.net.cable.rogers.com) |
| 16:52.12 | *** join/#nslu2-linux senneth (senneth@senneth.staff.irssi) [NETSPLIT VICTIM] |
| 16:52.12 | *** join/#nslu2-linux Jacmet (~jacmet@50C59F0E.flatrate.dk) [NETSPLIT VICTIM] |
| 16:52.12 | *** join/#nslu2-linux Ksilebo (russ@d14-69-132-59.try.wideopenwest.com) [NETSPLIT VICTIM] |
| 16:52.12 | *** join/#nslu2-linux eno-away (~eno-away@adsl-64-164-0-198.dsl.snfc21.pacbell.net) [NETSPLIT VICTIM] |
| 16:52.12 | *** join/#nslu2-linux Tiersten (tman@Tiersten.nslu2-linux) |
| 16:52.12 | *** join/#nslu2-linux bob_tm-toandfrom (~chatzilla@145.80-203-34.nextgentel.com) [NETSPLIT VICTIM] |
| 16:52.12 | *** join/#nslu2-linux rwhitby-away (~rwhitby@rwhitby.nslu2-linux) |
| 16:52.12 | *** join/#nslu2-linux cbrake (~cbrake@cpe-204-210-216-174.neo.res.rr.com) [NETSPLIT VICTIM] |
| 16:52.12 | *** join/#nslu2-linux D|dge (~didge@2001:960:624:1:0:0:0:1) [NETSPLIT VICTIM] |
| 16:52.12 | *** join/#nslu2-linux dyoung (~dyoung@dyoung.nslu2-linux) |
| 16:52.12 | *** join/#nslu2-linux nslu2-log (dyoung@dyoung.nslu2-linux) |
| 16:52.12 | *** join/#nslu2-linux DaKa2 (~david@193.13.58.211) [NETSPLIT VICTIM] |
| 16:52.12 | *** join/#nslu2-linux jbowler-away (~jbowler@jbowler.nslu2-linux) |
| 16:52.12 | *** join/#nslu2-linux rEALz|out (realz@your.mama.from-hell.de) [NETSPLIT VICTIM] |
| 16:52.12 | *** join/#nslu2-linux sp4ce (~la2aar@pcp07273245pcs.dalect01.va.comcast.net) [NETSPLIT VICTIM] |
| 16:52.12 | *** join/#nslu2-linux jf-logger (~Jean-Fabr@jeanfabrice.nslu2-linux) [NETSPLIT VICTIM] |
| 16:52.13 | *** join/#nslu2-linux widrone (~tommyw@65.80-203-228.nextgentel.com) [NETSPLIT VICTIM] |
| 16:52.13 | *** join/#nslu2-linux cbpage (~cpage@ip68-6-39-177.sb.sd.cox.net) |
| 16:52.13 | *** join/#nslu2-linux Fuzzel (jeroen@purgatory.unfix.org) [NETSPLIT VICTIM] |
| 16:52.13 | *** join/#nslu2-linux CIA-8 (~CIA@flapjack.navi.cx) [NETSPLIT VICTIM] |
| 16:52.13 | *** join/#nslu2-linux change-me (~change-me@h211.103.140.67.ip.alltel.net) [NETSPLIT VICTIM] |
| 16:52.13 | *** join/#nslu2-linux jp30-work (~jp30@jp30.nslu2-linux) [NETSPLIT VICTIM] |
| 16:52.13 | *** join/#nslu2-linux jacques (~jacques@jacques.nslu2-linux) |
| 16:52.13 | *** join/#nslu2-linux copperbeech (~copperbee@82-40-186-72.cable.ubr04.newm.blueyonder.co.uk) [NETSPLIT VICTIM] |
| 16:52.13 | *** join/#nslu2-linux ka6sox-office (~tking@netblock-66-159-209-52.dslextreme.com) |
| 16:52.13 | *** join/#nslu2-linux tyrak (~tyrak@ytti.fi) [NETSPLIT VICTIM] |
| 16:52.13 | *** join/#nslu2-linux slugbot (~supybot@netblock-66-159-209-54.dslextreme.com) [NETSPLIT VICTIM] |
| 16:52.13 | *** join/#nslu2-linux Exion (~jon@odin.utilityisp.com) [NETSPLIT VICTIM] |
| 16:52.13 | *** join/#nslu2-linux giel (~giel@145.116.4.55) [NETSPLIT VICTIM] |
| 16:52.13 | *** join/#nslu2-linux NAiL (~repvik@repvik-active-pdpc.nslu2-linux) [NETSPLIT VICTIM] |
| 16:52.13 | *** join/#nslu2-linux peteru-home (~peteru-ho@adsl-53-18.swiftdsl.com.au) [NETSPLIT VICTIM] |
| 16:52.13 | *** mode/#nslu2-linux [+o ChanServ] by irc.freenode.net |
| 17:01.39 | kitno455 | DaKa2, no probs, just wondering if you were getting credit |
| 17:01.50 | kitno455 | sane has alot of config files, huh :) |
| 17:12.18 | DaKa2 | :) |
| 17:12.48 | DaKa2 | I never feelt like actually beeing maintainer for it |
| 17:13.40 | DaKa2 | there must be a better way for CONFIGFILES, maybe /etc/sane.d would have worked |
| 17:25.28 | *** join/#nslu2-linux jp30 (~josh@jp30.nslu2-linux) |
| 17:27.38 | jp30 | hi, everyone. is bernhard walle here by any chance? |
| 17:32.55 | jp30 | ok, i will email him |
| 17:50.43 | *** join/#nslu2-linux AdamBaker (~aab@userch028.dsl.pipex.com) |
| 17:51.32 | *** join/#nslu2-linux nslu2-log (dyoung@dyoung.nslu2-linux) |
| 17:51.59 | *** join/#nslu2-linux ka6sox-office (~tking@netblock-66-159-209-52.dslextreme.com) |
| 17:55.52 | *** join/#nslu2-linux slugbot (~supybot@netblock-66-159-209-54.dslextreme.com) |
| 18:15.33 | *** join/#nslu2-linux bwalle (~bwalle@p54918F52.dip0.t-ipconnect.de) |
| 18:22.17 | jp30 | hi, bwalle, did you get my email? |
| 18:22.23 | bwalle | Yes |
| 18:22.30 | *** join/#nslu2-linux hanjo (~hanjo@pD95335A7.dip0.t-ipconnect.de) |
| 18:22.56 | jp30 | good! well, welcome to the wonderful world of unslung development. |
| 18:23.05 | bwalle | Thanks |
| 18:26.58 | CIA-8 | 03bwalle * 10unslung/make/ficy.mk: Added $(STAGING_LDFLAGS) to LDFLAGS and stip the binaries. |
| 18:27.02 | bwalle | jp30: Can you check? |
| 18:27.16 | jp30 | yes, hang on... |
| 18:28.00 | bwalle | hang on? |
| 18:28.21 | bwalle | Sorry, my English ;) |
| 18:29.19 | jp30 | i mean "wait while i check".... done. it's fine, i'll promote it and put it in the feed soon |
| 18:29.33 | bwalle | cool |
| 18:31.06 | bwalle | thanks |
| 18:31.17 | jp30 | no problem |
| 18:34.58 | jp30 | bwalle, did you intend to commit your make/%.mk: rule to the root Makefile? |
| 18:35.39 | jp30 | ...it's a nice idea, but i'd prefer developers to check with me, jf, or rwhitby before making infrastructural changes to build system |
| 18:37.31 | bwalle | I didn't change something in the Makefile beside adding my package for testing |
| 18:38.10 | jp30 | well, perhaps by accident: make/%.mk: |
| 18:38.10 | jp30 | PKG_UP=$$(echo $* | tr [a-z\-] [A-Z_]);\ |
| 18:38.10 | jp30 | sed -e "s/<foo>/$*/g" -e "s/<FOO>/$${PKG_UP}/g"\ |
| 18:38.10 | jp30 | <PROTECTED> |
| 18:38.10 | jp30 | <PROTECTED> |
| 18:38.25 | jp30 | at line 430 |
| 18:40.23 | bwalle | Could this be because I forgot "cvs update" before committing or something in this direction? |
| 18:40.53 | bwalle | In any case it was an accident. Sorry! |
| 18:41.58 | jp30 | no probs. if you ever added those lines to Makefile, they'll stay there until you remove them (even if you cvs update in the intervening time). i always do a cvs diff -u before commiting, so i can see what effect my commit is about to have |
| 18:42.03 | bwalle | But $$Header is replaced by CVS |
| 18:42.45 | bwalle | We should disable $-substitution for the Makefile in that case |
| 18:43.39 | bwalle | (I mean -kk) |
| 18:44.59 | jp30 | $-substitution is a feature of cvs i'm not too strong on. what exactly is the problem here? |
| 18:45.28 | bwalle | CVS replaces that sed line by itself |
| 18:45.59 | bwalle | It doesn't notice that this is inside '' and it shouldn't be replaced here. |
| 18:46.54 | bwalle | Of course you can revert this manually each time (I think, but I'm not sure) |
| 18:48.51 | bwalle | I'm not so good in Makefiles. Can you explain what the target does? |
| 18:50.09 | jp30 | i'm confused - you mean the make/%.mk target? i thought that you added it? |
| 18:50.25 | bwalle | I'm confused, too |
| 18:50.29 | jp30 | time to look at the cvs logs... |
| 18:50.37 | bwalle | Yes ;) |
| 18:52.08 | jp30 | my apologies, it was marceln who added it, and I guess due to the $-subst'n mixup, it ends up with the name of the last person to edit the file in it |
| 18:52.55 | bwalle | Right |
| 18:53.31 | bwalle | This CVS repository seems to be quite slow, isn't it? |
| 18:54.36 | jp30 | i'll have words with marceln, then. sorry for the mixup. sourceforge is a big system; cvs there seems to have speeded up recently as far as i can tell. it used to be dreadful |
| 18:57.04 | *** join/#nslu2-linux beewoolie-afk (~beewoolie@florence.buici.com) |
| 19:02.53 | CIA-8 | 03jp30 * 10unslung/Makefile: promote ficy, remove broken substitution from the make/%.mk target |
| 19:07.38 | CIA-8 | 03jp30 * 10unslung/Makefile: promote ipkg-web, imap |
| 19:25.07 | kitno455 | openslug 2.2 seems to use a 'quiet' kernel. i am not seeing any bootup messages before init starts, how can i change this? |
| 19:27.08 | jbowler-away | It's a bug, build the latest |
| 19:41.53 | Jacmet | fyi, I have just finished my 'Installing Debian Sarge on a Linksys NSLU2' howto if anyone are interested - see http://peter.korsgaard.com/articles/debian-nslu2.php |
| 19:48.47 | kolla_ | cool |
| 19:51.44 | Jacmet | kolla_: it's basically an alternative to openslug - it's a bit more tricky to setup and you need serial + usb ethernet - but then you get a "real" Debian box with all the packages only being an apt-get away |
| 19:52.34 | kolla_ | Jacmet: oh.. litle endianarm |
| 19:52.39 | kolla_ | litle endian |
| 19:56.05 | Jacmet | kolla_: yes, most arm systems are little endian and Debian only supports little endian on ARM |
| 19:56.36 | kolla_ | and here I thought you had made a armeb debian port :) |
| 19:57.01 | kolla_ | till I saw the need for USB-ethernet :) |
| 19:58.18 | Jacmet | nopes, that would have been quite a lot of work, and then you wouldn't be able to use all the nice precompiled packages anyway |
| 19:59.13 | kolla_ | mm |
| 19:59.27 | kolla_ | personally I dont like debian and prefer to build myself, so.. gentoo :) |
| 19:59.45 | kolla_ | but that's a choice, it's cool that one can run debian on it too |
| 20:04.31 | CIA-8 | 03jbowler 07org.openembedded.nslu2-linux * r5a0d81f9... 10/packages/openslug-init/ (openslug-init-0.10/functions openslug-init_0.10.bb): |
| 20:04.31 | CIA-8 | Fix for slugbug 197. This no longer runs udhcp to get the network address |
| 20:04.31 | CIA-8 | if /etc/default/sysconf has bootproto=static This affects network boot |
| 20:04.31 | CIA-8 | (nfs) only - previously a DHCP address would be used in preference to the |
| 20:04.31 | CIA-8 | specified static one. |
| 20:04.33 | CIA-8 | All NFS root users please test this - the number of failure cases are large |
| 20:04.35 | CIA-8 | and a failure may leave the system unbootable. |
| 20:04.37 | CIA-8 | 03jbowler 07org.openembedded.nslu2-linux * r74d18dbd... 10/packages/base-files/base-files_3.0.14.bb: |
| 20:04.40 | CIA-8 | slugbug 205 |
| 20:04.42 | CIA-8 | Ensure that /home/root still exists, even though the root home directory |
| 20:04.44 | CIA-8 | is /root because install passwd files are not typically overwritten on |
| 20:04.46 | CIA-8 | upgrade and, without this, it may be impossible to log in to the system. |
| 20:04.48 | CIA-8 | PR bumped, but this only affects openslug |
| 20:04.50 | CIA-8 | 03jbowler 07org.openembedded.nslu2-linux * r0c0e42d7... 10/packages/ (14 files in 11 dirs): |
| 20:04.52 | CIA-8 | propagate from branch 'org.openembedded.dev' (head 951c0c24b5755e15cac36ec6f6306473638e2522) |
| 20:04.54 | CIA-8 | <PROTECTED> |
| 20:05.31 | DaKa2 | ahh, nice |
| 20:05.55 | DaKa2 | have to test the fix for bug 197 next time I drop by work |
| 20:08.44 | DaKa2 | but i would need the builtin ethernet |
| 20:08.57 | Jacmet | kolla_: well, you're welcome to port gentoo to it ;) I wouldn't want to wait for the system to recompile though ;) |
| 20:09.12 | kolla_ | Jacmet: way ahead of you ;) |
| 20:09.25 | DaKa2 | and there is something nice about openslug and the whole community around it |
| 20:09.54 | Jacmet | DaKa2: certainly, but having 16K packages available for you to apt-get is also nice ;) |
| 20:10.03 | Jacmet | kolla_: oh? |
| 20:10.17 | kolla_ | Jacmet: till some silly package decides to pull down X11 and whatnot :) |
| 20:10.29 | DaKa2 | well, yes.. :) but I wont need them all on the slug |
| 20:10.37 | DaKa2 | its nice on my desktop and servers though |
| 20:10.56 | Jacmet | kolla_: well, you'll get notified by that anyway - and with a USB disk it doesn't really matter |
| 20:11.44 | kolla_ | have to use debian at work, I dont wont it on my own stuff :) |
| 20:11.57 | DaKa2 | ... |
| 20:12.29 | Jacmet | afk .. |
| 20:12.47 | DaKa2 | have to use windows at work, I dont want it on my own stuff :) |
| 20:12.53 | kolla_ | hehe |
| 20:13.27 | DaKa2 | except all the servers, I have controll over them, so, Debian :-) |
| 20:14.18 | DaKa2 | but really, who cares what distro it is, just its linux (or something similar) |
| 20:14.36 | kolla_ | like... aix or irix? :) |
| 20:14.38 | kolla_ | hehe |
| 20:14.44 | DaKa2 | ok.. maybe no.. |
| 20:15.13 | DaKa2 | linux or bsd |
| 20:15.54 | kolla_ | Jacmet: we're doing gentoo/armeb-uClibc these weeks/months :) |
| 20:17.28 | kolla_ | I earlier had a very much working armeb-glibc setup till I got back from holidays, found openslug with 2.6 kernel, managed to mix mips and armeb in my head (tht's what 5 weeks away from computers does) and wiped it, believing I could just install from scratch from stage-tarball :) |
| 20:18.34 | kolla_ | however, there was no stage-tarball anywhere |
| 20:24.23 | *** join/#nslu2-linux llagendijk (~louis@lagendijk.xs4all.nl) |
| 20:37.28 | *** join/#nslu2-linux llagendijk (~louis@lagendijk.xs4all.nl) |
| 20:48.40 | *** join/#nslu2-linux jaylee7877 (~jlee@kramer.pbu.edu) |
| 20:51.29 | *** part/#nslu2-linux tyrak (~tyrak@ytti.fi) |
| 20:54.41 | *** join/#nslu2-linux [g2] (~g2@g2.nslu2-linux) |
| 21:11.48 | *** join/#nslu2-linux llagendijk (~louis@lagendijk.xs4all.nl) |
| 21:29.17 | jaylee7877 | I'm using openslug 2 beta and getting errors with configure (when doing the configure, make, make install shuffle). The errors point to trouble with /usr/lib/libc.so. Any ideas? |
| 21:30.35 | jaylee7877 | Here are the errors: |
| 21:30.35 | jaylee7877 | /usr/lib/gcc/armeb-linux/3.4.4/../../../../armeb-linux/bin/ld:/usr/lib/gcc/armeb-linux/3.4.4/../../../libc.so: file format not recognized; treating as linker scrip |
| 21:31.23 | jaylee7877 | and /usr/lib/gcc/armeb-linux/3.4.4/../../../../armeb-linux/bin/ld:/usr/lib/gcc/armeb-linux/3.4.4/../../../libc.so:4: parse error |
| 21:31.46 | jbowler | What platform was that run on? |
| 21:32.05 | jaylee7877 | NSLU2 with latest openslug firmware |
| 21:32.37 | jaylee7877 | 2.0 Beta (2005-06-22) |
| 21:33.03 | jbowler | Did you follow the instructions on the wiki for the native development environment? |
| 21:34.17 | jaylee7877 | I was previously using unslung. I did not see instructions for openslug though. |
| 21:35.33 | jbowler | http://www.nslu2-linux.org/wiki/HowTo/OpenSlugNativeCompileEnvironment |
| 21:41.59 | jaylee7877 | hmmm... looks like that little bit at the bottom of OpenSLugDevInst may be relevant to my issue. Will run the whole script just to be sure but most of the packages are already installed. Thanks bunches. |
| 21:43.41 | jaylee7877 | I did the "de-underclock" hack today to, it was quite easy and the slug seems to be a bit snappier now. |
| 21:58.59 | bwalle | bob_tm-toandfrom, are you here? |
| 21:59.14 | bob_tm-toandfrom | bwalle: Yes indeed. |
| 22:00.04 | bwalle | I tested switching streamripper to 1.61.10 and adding compiling in ogg support. |
| 22:00.16 | bob_tm-toandfrom | <PROTECTED> |
| 22:00.39 | bwalle | What do you think about it. |
| 22:00.44 | bob_tm-toandfrom | (btw. ficy.mk builds nicely) |
| 22:01.01 | bob_tm-toandfrom | It sounds great, but you're the one who tested it - how did it work out? |
| 22:01.30 | bwalle | It works. (I had compiled 1.61.10 with ogg support before natively.) |
| 22:01.49 | bob_tm-toandfrom | Should I upgrade the current version (.5) to .10? |
| 22:01.53 | bwalle | In the mailing list there was somebody who wanted an old version of streamripper? |
| 22:02.02 | bwalle | I think that should be an extra package |
| 22:02.03 | bob_tm-toandfrom | Yes, but we heard nothing more from him |
| 22:02.24 | bob_tm-toandfrom | It sounded a bit underspecified. |
| 22:02.28 | bwalle | I can send you the patch (because of Ogg support) |
| 22:02.53 | bob_tm-toandfrom | Cool - please do. I won't be doing it before tomorrow, though - on my way to bed. |
| 22:03.08 | bwalle | (Ogg support is not really complete, but that's an upstream problem. But better than nothing.) |
| 22:03.37 | bwalle | Ok, I'll send you an email. |
| 22:03.45 | bwalle | No problem, it has time. |
| 22:03.48 | bob_tm-toandfrom | A good start. I don't use ogg much, but I will try it out with a station. They are usually low bitrate when using OGG? |
| 22:04.18 | bwalle | You can only record one large file, that's the problem. No splitting yet |
| 22:04.21 | ByronT | bob_tm! |
| 22:04.30 | ByronT | where the heck have you been? |
| 22:04.39 | bwalle | Don't know the bitrate |
| 22:04.45 | bob_tm-toandfrom | With OGG, I guess - with mp3 it should be as before |
| 22:05.03 | bob_tm-toandfrom | ByronT: Hey! Been to Spain, Portugal and The Netherlands. |
| 22:05.06 | bwalle | of course |
| 22:05.18 | bwalle | no big change in mp3 |
| 22:05.28 | ByronT | we were wondering if you had fallen off the map or something |
| 22:05.42 | bwalle | The only advantage in mp3 is that it supports rulefiles (automatically dropping some "songs" [advertising] and so on) |
| 22:05.43 | bob_tm-toandfrom | Nah, I should guess. I will be a good tester of that ! |
| 22:05.46 | bwalle | That's a big plus of that version |
| 22:05.52 | bob_tm-toandfrom | ByronT: I'm even turbo now. |
| 22:05.58 | ByronT | :) |
| 22:06.34 | ByronT | good to hear... |
| 22:06.35 | bob_tm-toandfrom | bwalle: That's nice - can you also trigger on size? |
| 22:06.47 | ByronT | was that a sabbatical or just an extended vacation? |
| 22:07.07 | bwalle | don't know |
| 22:07.09 | bob_tm-toandfrom | ByronT: I've been on vacation for more or less a year now... |
| 22:07.27 | ByronT | ah... so maybe just a vacation from us PITAs |
| 22:07.28 | ByronT | ? |
| 22:08.06 | bob_tm-toandfrom | ByronT: Now I will stay in Norway for 4 weeks! Thanks to DaKa2 my favorite apps are started compiling on OpenEmbedded |
| 22:08.14 | bob_tm-toandfrom | s/are/have/ |
| 22:08.58 | bob_tm-toandfrom | ByronT: Been in Norway since December, but every month a week in Amsterdam. Was this girl, you see.... |
| 22:09.14 | ByronT | heh |
| 22:09.25 | bob_tm-toandfrom | Since June on a _real_ vacation |
| 22:09.37 | bob_tm-toandfrom | ByronT: Note the "was" |
| 22:10.11 | ByronT | oh... end bad? |
| 22:10.28 | ByronT | and make us PITAs seem like ok guys? |
| 22:10.47 | bob_tm-toandfrom | ByronT: Not really bad - a bit sad, but more like the ending of a festival. We all know it's time to go home. |
| 22:11.07 | bob_tm-toandfrom | ByronT: Don't feel hurt - you're all great guys! |
| 22:12.22 | bob_tm-toandfrom | The new make system is awesom - it is like weaving together so much stuff and it just works! |
| 22:13.18 | ByronT | :) |
| 22:13.59 | bob_tm-toandfrom | The OpenEmbedded package make system is very neat, though _slightly_ underdocumented. |
| 22:16.35 | *** join/#nslu2-linux widrone_ (~tommyw@65.80-203-228.nextgentel.com) |
| 22:30.03 | *** join/#nslu2-linux odoc (~odoc@d024164.adsl.hansenet.de) |
| 22:30.40 | [g2] | Jacmet, hey congrats on the howto for debian LE ! |
| 22:30.53 | [g2] | beewoolie-afk, just pointed that out |
| 22:34.26 | [g2] | kolla_, hey what's up with your gentoo port |
| 23:01.04 | giel | hi |
| 23:01.10 | giel | that is, ottawa |
| 23:08.31 | kolla_ | [g2]: not really mine as much as solar and vapier :) |
| 23:08.37 | kolla_ | 's |
| 23:09.49 | [g2] | kolla_, yeah are you running their build stuff ? I'm in gentoo-embedded now |
| 23:10.42 | kolla_ | [g2]: earlier there was this fedora-toolchain that I buildt gentoo from, but now I'm building on an image I got from solan.. on friday or something |
| 23:10.52 | kolla_ | uclibc this time |
| 23:11.05 | [g2] | solar ? |
| 23:11.18 | kolla_ | yes, solar |
| 23:39.00 | *** join/#nslu2-linux kolla_ (kolla@firda.kolla.no) |
| 23:58.43 | CIA-8 | 03jp30 * 10unslung/ (make/crosstool.mk sources/crosstool/armv5b-softfloat.dat): add --disable-libunwind-exceptions to GCC_EXTRA_CONFIG |