| 00:06.42 | CIA-8 | 03jp30 * 10unslung/make/net-snmp.mk: disable static libs |
| 00:10.44 | jbowler | NOTE: if you get into 3-way-merge-hell SIGINT aka control-C is a fine way out - monotone operations are atomic and can be aborted just so long as you never SIGKILL. |
| 00:14.32 | *** join/#nslu2-linux ByronT-Away (ByronT@ByronT.nslu2-linux) |
| 00:21.06 | CIA-8 | 03jp30 * 10unslung/unslung-check-package.pl: say something on success |
| 00:27.47 | CIA-8 | 03jp30 * 10unslung/Makefile: many promotions |
| 00:33.37 | CIA-8 | 03jbowler 07org.openembedded.nslu2-linux * r81b86311... 10/packages/meta/openslug-packages.bb: Add monotone to the development packages list. |
| 01:43.29 | *** join/#nslu2-linux rwhitby-web (www-data@netblock-66-159-209-60.dslextreme.com) |
| 01:48.19 | *** join/#nslu2-linux ByronT (~byron-por@ByronT.nslu2-linux) |
| 01:48.45 | CIA-8 | 03jbowler 07org.openembedded.nslu2-linux * re9d31e77... 10/ (11 files in 8 dirs): |
| 01:48.45 | CIA-8 | propagate from branch 'org.openembedded.dev' (head 99876a04715cb6df80cabdbeed48323d46e1d6f5) |
| 01:48.45 | CIA-8 | <PROTECTED> |
| 01:48.47 | CIA-8 | 03jbowler 07org.openembedded.nslu2-linux * r57e9a003... 10/packages/libopie/libopie2.inc: Remove spurious blank line introduced by merge |
| 02:40.43 | *** join/#nslu2-linux ByronT (~byron-por@ByronT.nslu2-linux) |
| 02:52.20 | *** join/#nslu2-linux dyoung-web (www-data@netblock-66-159-209-60.dslextreme.com) |
| 04:37.12 | jbowler-away | I'm getting consistent failure in the mgetty build (glibc and uclibc) because it tries to build in the top level directory with the build (ix86) gcc |
| 05:12.54 | *** join/#nslu2-linux jp30 (~josh@jp30.nslu2-linux) |
| 05:24.20 | CIA-8 | 03jp30 * 10unslung/Makefile: don't mess with hard_libdir_flag_spec when patching libtool. this breaks packages that build dependent libraries (like glib building libgobject). instead we need to avoid paths to the staging area in .la files |
| 05:27.31 | CIA-8 | 03jbowler * r76 10/trunk/openslug/nslu2-linux/packages/ (boost monotone): Add links for boost and monotone |
| 05:30.18 | CIA-8 | 03jp30 * 10unslung/make/ (libgcrypt.mk libgpg-error.mk libtasn1.mk opencdk.mk): avoid installing libtool archives in staging |
| 05:41.53 | CIA-8 | 03jp30 * 10unslung/make/gconv-modules.mk: strip gconv modules, bump ipk version |
| 05:43.26 | CIA-8 | 03jp30 * 10unslung/make/gconv-modules.mk: unbork previous change |
| 05:49.45 | CIA-8 | 03jp30 * 10unslung/make/gconv-modules.mk: don't package modules with broken rpaths |
| 06:02.52 | CIA-8 | 03jp30 * 10unslung/make/expat.mk: don't stage libtool archive |
| 06:09.19 | DaKa2 | Building postfix fails on do_install: "/home/slug/openslug/tmp/staging/i686-linux/bin/postconf: error while loading shared libraries: libpcre.so.0: cannotopen shared object file: No such file or directory" |
| 06:11.37 | CIA-8 | 03jp30 * 10unslung/make/freetype.mk: strip libraries, patch libtool |
| 06:23.47 | CIA-8 | 03jp30 * 10unslung/make/pango.mk: don't stage libtool archives |
| 06:42.50 | jbowler | I'm seeing prce-native fail to compile because the attempt to pre-empty the make build of dftable.o isn't sufficient to stop make trying it too. Anyway, it's bug 196 |
| 06:50.54 | CIA-8 | 03jp30 * 10unslung/make/crosstool.mk: remove libtool archives containing host paths from crosstool |
| 07:01.28 | CIA-8 | 03jp30 * 10unslung/make/libstdc++.mk: strip libstdc++ |
| 07:03.56 | CIA-8 | 03jp30 * 10unslung/make/libtiff.mk: remove libtool archives from staging, static libs from package |
| 07:12.10 | CIA-8 | 03jbowler * r77 10/trunk/openslug/nslu2-linux/packages/install: Add new install package to fix install problems |
| 07:15.07 | CIA-8 | 03jp30 * 10unslung/make/libtiff.mk: libtiff: upstream upgrade, fix download location |
| 07:17.10 | CIA-8 | 03jp30 * 10unslung/make/libpng.mk: libpng: don't stage libtool archives |
| 07:28.30 | CIA-8 | 03jp30 * 10unslung/make/gtk.mk: don't stage libtool archives |
| 07:38.40 | CIA-8 | 03jbowler 07org.openembedded.nslu2-linux * rf4eaaacf... 10/packages/meta/openslug-packages.bb: |
| 07:38.40 | CIA-8 | Move various packages which only compile with glibc to the 'linux only' |
| 07:38.40 | CIA-8 | list. |
| 07:40.33 | CIA-8 | 03jp30 * 10unslung/make/ncurses.mk: ncurses: strip, don't package static libs |
| 07:43.46 | CIA-8 | 03jp30 * 10unslung/make/ncurses.mk: ncurses: unbork symlink tweak |
| 07:43.47 | CIA-8 | 03jbowler 07org.openembedded.nslu2-linux * r43007d43... 10/ (8 files in 8 dirs): |
| 07:43.47 | CIA-8 | Add install-native package and remove the install-sh from those packages |
| 07:43.47 | CIA-8 | which used it to get round the install -s problem - now simply add |
| 07:43.47 | CIA-8 | install-native to the DEPENDS for packages which attempt to use the host |
| 07:43.47 | CIA-8 | install with '-s' |
| 08:16.40 | *** join/#nslu2-linux odoc (~odoc@d015251.adsl.hansenet.de) |
| 08:21.41 | *** join/#nslu2-linux kolla_ (kolla@firda.uninett.no) |
| 08:39.09 | *** join/#nslu2-linux kared (~kared@203-206-59-53.dyn.iinet.net.au) |
| 09:14.20 | *** join/#nslu2-linux od0c (~odoc@c220089.adsl.hansenet.de) |
| 09:19.20 | *** join/#nslu2-linux ByronT (~byron-por@ByronT.nslu2-linux) |
| 09:20.24 | *** join/#nslu2-linux od0c (~odoc@c220089.adsl.hansenet.de) [NETSPLIT VICTIM] |
| 10:14.05 | kared | !release |
| 11:31.36 | *** join/#nslu2-linux cbpage (~cpage@ip68-6-39-177.sb.sd.cox.net) |
| 11:57.52 | CIA-8 | 03repvik * r78 10/trunk/openslug/nslu2-linux/packages/xinetd: Added xinetd |
| 11:58.45 | DaKa2 | :) |
| 12:36.07 | VoodooZ_work | can somebody explain to me why I'm getting those annoying monotone 3-way merges on files I never even looked at. (openzaurus-3.5.4.conf!) |
| 12:36.41 | VoodooZ_work | I wouldn't expect to have to do merges unless I made changes to my working copy right? |
| 12:38.43 | VoodooZ_work | Actually, the only difference between the files was the CVSDATE header. Still annoying. |
| 12:39.43 | VoodooZ_work | Unless I shouldn't be using the Makefile's 'make update' target to pull in the latest changes?? |
| 12:40.45 | NAiL | VoodooZ_work: Nothing wrong with using make update. There was some oddity last night, when some strange files showed up in a 3-way merge |
| 12:41.35 | VoodooZ_work | crap I hate those! |
| 12:41.56 | VoodooZ_work | so make update and doing it manually are the same right? |
| 12:42.01 | NAiL | yeah |
| 12:42.15 | VoodooZ_work | ok, I was just starting to believe I was doing something wrong. |
| 12:42.55 | VoodooZ_work | After all I would have expected monotone to do its own auto-merge on a file I never even opened. |
| 12:43.08 | VoodooZ_work | Which file was it? |
| 12:44.51 | VoodooZ_work | did you get the openzaurus-....conf one too? How did you fix it? |
| 12:45.51 | NAiL | I didn't. Other people did... |
| 12:46.02 | NAiL | some libopie stuff |
| 12:46.20 | VoodooZ_work | Crap. I have another one now! some vixie cron stuff. |
| 12:46.32 | VoodooZ_work | I miss bk suddenly. |
| 12:47.08 | VoodooZ_work | at least it gave me take the lazy way out by just using the local/remote copy. |
| 12:47.12 | rwhitby-away | For USD$5K per year per developer you can have it back again .... |
| 12:47.19 | VoodooZ_work | yeah. funny. |
| 12:48.17 | VoodooZ_work | If somebody could explain to me what's going on that would help though. |
| 12:48.30 | VoodooZ_work | I can't be the only using it. |
| 12:50.38 | rwhitby-away | Using what? |
| 12:50.45 | VoodooZ_work | now it's packages/cron/cron_3.0pl1.bb. which I never modified. |
| 12:51.05 | VoodooZ_work | monotone. It's forcing me to do 3-way merges of all sort of files I never touched. |
| 12:51.34 | VoodooZ_work | And it's not too user-friendly as it opens up 3 files in vim with no names/labels to tell me what's what. |
| 12:51.49 | rwhitby-away | yup |
| 12:52.33 | VoodooZ_work | that's why I said bk's merge was better. |
| 12:52.58 | VoodooZ_work | not that I want to go back to it though. It had it's own problems. |
| 12:53.05 | rwhitby-away | yup |
| 12:53.30 | VoodooZ_work | Once I get used to it it should be fine but right now it's a pain. |
| 12:53.35 | rwhitby-away | yup |
| 12:54.23 | rwhitby-away | don't mind me, I'm just waiting for monotone to verify the new revisions (which may take a while .....) |
| 12:55.09 | VoodooZ_work | Are you doing it via 'make update'? |
| 12:55.22 | rwhitby-away | yep |
| 12:55.27 | VoodooZ_work | ok |
| 12:56.53 | VoodooZ_work | A nice spinning progress indicator would be nice for that rather long process. |
| 12:57.14 | VoodooZ_work | I would implement it but I'm not that good yet. |
| 12:57.33 | rwhitby-away | night all |
| 12:58.30 | NAiL | nite |
| 13:02.08 | NAiL | strange... |
| 13:02.15 | DaKa2 | ? |
| 13:02.16 | VoodooZ_work | what's that. |
| 13:02.26 | VoodooZ_work | merging problems? :) |
| 13:02.34 | NAiL | *now* I'm seeing the dropbear disconnects |
| 13:02.50 | jacques | ;-) |
| 13:03.02 | NAiL | but only on unstable |
| 13:03.17 | NAiL | built 1st of july |
| 13:07.54 | rwhitby-asleep | make update succeeded without any merges ... |
| 13:08.33 | VoodooZ_work | damn! I didn't even touch the thing. |
| 13:08.35 | NAiL | I wonder if people who got a specific revision gets into trouble when they do a new update |
| 13:08.45 | VoodooZ_work | What monotone do you have? |
| 13:09.03 | rwhitby-asleep | 0.19 from debian etch |
| 13:09.29 | VoodooZ_work | 0.19 FC4 |
| 13:09.35 | NAiL | 0.19 etch |
| 13:09.37 | rwhitby-asleep | merge succeeded on nudi too |
| 13:10.00 | VoodooZ_work | I just completed my changes too. |
| 13:10.43 | VoodooZ_work | I still don't see why it's asking me to merge zaurus, cron stuff I never used/touch. odd. |
| 13:10.58 | VoodooZ_work | rwhitby-asleep, thanks for confirming. |
| 13:11.15 | VoodooZ_work | did the Makefile change recently? |
| 13:11.24 | rwhitby-asleep | nope |
| 13:12.09 | VoodooZ_work | wow. I don't know what to do now. |
| 13:12.36 | rwhitby-asleep | Sorry VoodooZ_work, but I have no idea why it's asking you to do merges. |
| 13:13.17 | VoodooZ_work | It's ok. I'll just rip apart and start all over again. |
| 13:13.36 | VoodooZ_work | Or maybe I'll take an extended break :( |
| 13:17.31 | VoodooZ_work | I wonder if there's a way to "extract" my changes though. |
| 13:19.01 | NAiL | VoodooZ_work: you could do a recursive diff against a "new" tree, and just cut out the parts you didn't touch |
| 13:19.21 | VoodooZ_work | yeah. I guess. |
| 13:19.48 | VoodooZ_work | I'm paranoid it might happen again though. |
| 13:19.57 | NAiL | if you have uncommitted changes, mt diff lists them |
| 13:20.11 | VoodooZ_work | they're all committed. |
| 13:20.38 | VoodooZ_work | There must be a way to list all my commits and extract them. I'll have to check the mt docs. |
| 13:20.48 | *** join/#nslu2-linux caplink811-log (~caplink81@dsl-213-023-128-056.arcor-ip.net) |
| 13:21.01 | NAiL | ~seen ka6sox |
| 13:21.01 | jbot | ka6sox <~ka6sox@ka6sox.nslu2-linux> was last seen on IRC in channel #nslu2-linux, 37d 11h 49m 15s ago, saying: 'my thoughts exactly'. |
| 13:21.18 | NAiL | ka6sox-office: ping |
| 13:21.41 | NAiL | heh... idle 14 days |
| 13:27.01 | CIA-8 | 03rwhitby * r79 10/trunk/openslug/nslu2-linux/packages/ (install install): Fixed the install symlink |
| 13:51.33 | kolla_ | so.. time to check what errors I get today :) |
| 13:54.20 | kolla_ | NAiL: debian, right? 2.6.12 kernel? |
| 13:56.34 | NAiL | nah, older than that |
| 13:56.52 | NAiL | 2.6.8-2-k7 |
| 13:57.22 | NAiL | 2.6.11.2 on the slug |
| 13:58.56 | *** join/#nslu2-linux ByronT (~byron-por@ByronT.nslu2-linux) |
| 14:01.02 | kolla_ | hm, so .. retro |
| 14:01.31 | kolla_ | top acted strangely on 2.6.12 on this debian test box we have |
| 14:03.08 | kolla_ | from what I understand the -d option of top is a delay in seconds, only with 2.6.12 it acted as if it was 1/100th of a second |
| 14:03.30 | kolla_ | so with the default value, it refreshed constantly |
| 14:04.06 | kolla_ | went back to 2.6.10 and it was normal again |
| 14:04.27 | kolla_ | I dont have this problem on any of my own 2.6.12-machines though |
| 14:15.53 | jbowler | VoodooZ_work: the merges happen because for some reason the 'common ancestor' is back from June 27. |
| 14:16.14 | jbowler | I stared at it for about an hour and couldn't work out what was going on. |
| 14:16.52 | jbowler | All the OE files (opie, zaurus) are actually unchanged on nslu2-linux and all the stuff like cron only has changes on nslu2-linux. |
| 14:17.59 | jbowler | I did a diff -r --exclude=MT --brief org.openembedded.dev org.openembedded.nslu2-linux after the merge to check the result. |
| 14:20.55 | *** join/#nslu2-linux d|dge (~didge@2001:960:624:1:0:0:0:1) |
| 14:31.24 | VoodooZ_work | jbowler, really? |
| 14:31.36 | VoodooZ_work | how come the others didn't get it though? |
| 14:32.38 | jbowler | You got it, [cc]smart got it, NAiL got it, I got it - so far as I could see we all encountered the same merge or something very similar... |
| 14:32.41 | VoodooZ_work | jbotwler, so what do you suggest I do to recover? |
| 14:33.02 | VoodooZ_work | ok. rwhitby-away didn't get it so I thought I was the freak! :) |
| 14:33.42 | NAiL | uhm, no. I didn't get it |
| 14:34.19 | jbowler | Oh, ok... there's something I don't understand going on. |
| 14:34.51 | jbowler | My fix was to install 'meld' - it's far from perfect but it's much easier to use than vimdiff. |
| 14:35.11 | VoodooZ_work | ok. I'll do that too then. |
| 14:35.19 | jbowler | The best solution I know is to use kdiff3, but that means rewriting the LUA hook (kdiff3 is the default in monotone 0.20) |
| 14:35.43 | jbowler | For all those OE merges it is just a matter of taking the OE file. |
| 14:36.26 | jbowler | But meld doesn't make that very easy - with kdiff3 it can be done by simply accepting all the changes from the correct side. |
| 14:36.30 | VoodooZ_work | yeah, that's the problem with vim, I couldn't even tell what was what. |
| 14:36.46 | VoodooZ_work | How hard is kdiff3 install? |
| 14:37.23 | jbowler | It needs kde... If you have kde it's one of the development tools, if you don't it is a big deal. |
| 14:37.45 | VoodooZ_work | yeah, I used KDE under FC4. |
| 14:38.07 | jbowler | Anyway, with 0.19 it needs a LUA hook change too. |
| 14:38.46 | jbowler | (The LUA hook could actually be made to do the same thing as bk - i.e. give a three way choice of left file, right file or merge and only invoke the merge tool on the latter). |
| 14:39.16 | VoodooZ_work | yeah. that would be sweet! |
| 14:40.10 | VoodooZ_work | meld installed. |
| 14:40.53 | VoodooZ_work | Now I wonder if it's not too late for me as I got pissed and started saving the left file (???) for all merges. |
| 14:41.02 | VoodooZ_work | And they kept coming... |
| 14:41.24 | jbowler | Kill the update before it completes, start again. |
| 14:41.48 | jbowler | I had about five OE files to merge. |
| 14:42.23 | VoodooZ_work | ok, then what? using meld, what should I do? |
| 14:42.51 | jbowler | Just run it again, it should use meld in preference to vim. |
| 14:43.20 | jbowler | And now you will be able to see the messages which say which file is which :) |
| 14:44.11 | VoodooZ_work | It says I should merge all changes to center. |
| 14:44.50 | VoodooZ_work | Already looks much much better than vi! |
| 14:45.16 | jbowler | It's fairly neat but I found it has bugs - sometimes clicking on the arrows to transfer the changes doesn't work. |
| 14:45.31 | VoodooZ_work | ok. I'll keep an eye open for that. |
| 14:46.16 | VoodooZ_work | so for the openzaurus merge for example, I just make sure the center copy has the latest changes right? |
| 14:47.31 | jbowler | I think the left one is 'incoming' and the right is, effectively, your local version, if so left and center should end up identical (with no changes to the left - only change the center). |
| 14:50.53 | VoodooZ_work | strange, the undo didn't seem to work. |
| 14:52.41 | jbowler | I was able to ^Z all the way back to no changes. |
| 14:53.12 | jbowler | I found I could also use 'cp' on the temporary file names (simply overwrite the merge file with the correct version). |
| 14:53.13 | VoodooZ_work | must be me. |
| 14:53.23 | VoodooZ_work | good |
| 14:53.41 | jbowler | This is, of course, horribly wrong - it shouldn't be this hard. |
| 14:53.56 | VoodooZ_work | should the CVSDATE line of openszaurus.conf be commented out now? |
| 14:54.21 | jbowler | You get that too... Yes, and it should be in 200507 |
| 14:54.32 | VoodooZ_work | ok. Just wanted to make sure. |
| 14:55.00 | VoodooZ_work | Once I saved I just quit? What's the STOP button for? |
| 14:55.04 | jbowler | This doesn't make sense because I hit precisely that merge 8 hours ago - and the result is in the nslu2-linux branch and dev. |
| 14:55.30 | jbowler | The process has to exit, apparently, so quit after the save. |
| 14:55.49 | VoodooZ_work | uhoh. If you're confused then I'm definitely lost! ;) |
| 14:56.34 | VoodooZ_work | ok, now it's cron_3.0pl1.bb |
| 14:57.03 | jbowler | I'd convinced myself it was ok, because I diffed the branches and everything looked fine with only the ~5 changes I expected on each. |
| 14:57.40 | VoodooZ_work | definitely a very colourful program! |
| 14:58.32 | jbowler | Now I'm no longer sure. I guess your common ancestor is the one I saw too from June 27, but why doesn't it just take the 'changes' I've pushed back into the db... |
| 14:58.57 | *** join/#nslu2-linux nslu2-log (dyoung@dyoung.nslu2-linux) |
| 15:02.08 | VoodooZ_work | wow! how many merges did you get? It won't stop! |
| 15:02.30 | jbowler | 5 from .dev 5 from the nslu2-linux side |
| 15:03.03 | VoodooZ_work | ok |
| 15:04.26 | jbowler | But afterward the org.openembedded.dev and org.openembedded.nslu2-linux heads should differ in only the following files: |
| 15:04.27 | VoodooZ_work | did you get the xinetd.init one? |
| 15:04.31 | jbowler | Files org.openembedded.dev/.mt-attrs and org.openembedded.nslu2-linux/.mt-attrs differ |
| 15:04.31 | jbowler | Only in org.openembedded.dev/packages/cron/cron-3.0pl1: install-sh |
| 15:04.31 | jbowler | Files org.openembedded.dev/packages/cron/cron_3.0pl1.bb and org.openembedded.nslu2-linux/packages/cron/cron_3.0pl1.bb differ |
| 15:04.32 | jbowler | Only in org.openembedded.dev/packages/cyrus-imapd/cyrus-imapd-2.2.12: install-sh |
| 15:04.32 | jbowler | Files org.openembedded.dev/packages/cyrus-imapd/cyrus-imapd_2.2.12.bb and org.openembedded.nslu2-linux/packages/cyrus-imapd/cyrus-imapd_2.2.12.bb differ |
| 15:04.34 | jbowler | Only in org.openembedded.nslu2-linux/packages: install |
| 15:04.36 | jbowler | Files org.openembedded.dev/packages/meta/openslug-packages.bb and org.openembedded.nslu2-linux/packages/meta/openslug-packages.bb differ |
| 15:04.39 | jbowler | Files org.openembedded.dev/packages/mgetty/mgetty_1.1.30.bb and org.openembedded.nslu2-linux/packages/mgetty/mgetty_1.1.30.bb differ |
| 15:05.31 | jbowler | xinetd.init is an nslu2-linux change, not sure whether I got it. |
| 15:05.59 | jbowler | BTW what command did you run - 'sync' or 'pull' (or is this an explicit merge because you got two heads?) |
| 15:06.14 | VoodooZ_work | I use the Makefile's 'make update'. |
| 15:06.28 | VoodooZ_work | sync is bi-directional so I wouldn't use it. |
| 15:07.16 | VoodooZ_work | it seems to have stopped. But it's still thinking... |
| 15:07.36 | jbowler | It's waiting for you to blink ;-) |
| 15:07.49 | VoodooZ_work | hehehe. |
| 15:08.03 | VoodooZ_work | Actually, I got this: enter passphrase for key ID [stephane641@rogers.com]: |
| 15:08.03 | VoodooZ_work | monotone: misuse: empty passphrase not allowed |
| 15:08.03 | VoodooZ_work | make: *** [update-openembedded] Error 1 |
| 15:08.15 | VoodooZ_work | Darn! I must have pressed enter too early. |
| 15:08.25 | VoodooZ_work | so I have to redo the whole thing. |
| 15:11.39 | jbowler | The Makefile (at least the current version) does 'monotone update' followed, sometimes, by 'monotone merge' - were you in 'update' or 'merge'? |
| 15:12.25 | VoodooZ_work | euh? I only do make update to pull and update everything. rwhitby-away said it was the right way. |
| 15:12.59 | VoodooZ_work | Seems to have worked. It's updating now... |
| 15:13.01 | jbowler | Yes, but the Makefile executes various monotone commands - I'm interested in knowing when you hit the merge. |
| 15:13.22 | VoodooZ_work | I hit the merge prior to the update. Probably during the pull. |
| 15:14.07 | jbowler | Pull is non-interactive. I got the wrong line in the Makefile - you must be in the explicit 'merge' |
| 15:14.25 | jbowler | monotone merge -b org.openembedded.nslu2-linux |
| 15:15.02 | VoodooZ_work | yeah. it looks like it. there's an if statement that looks for different heads or seomthign |
| 15:15.35 | jbowler | So you have local changes commited to the nslu2-linux branch which are not pushed back to the server, that creates the multiple-heads situation. |
| 15:16.31 | VoodooZ_work | yeah, most of my changes are specific to my apps so I'll never push them. But none of them were even related to xinetd and zaurus... |
| 15:17.10 | jbowler | Then the spurious files happen because the common ancestor is a common ancestor of all the files - a point where the branch (remote and local) was identical. |
| 15:17.30 | VoodooZ_work | I see. Still pretty scary though. |
| 15:18.01 | VoodooZ_work | It just happened suddenly although I've been committing and pulling on an hourly basis almost |
| 15:18.44 | jbowler | Yes. That's one thing I still don't understand - why it suddenly happened... |
| 15:19.48 | VoodooZ_work | Probably somebody messing with it at the other end?? OE? |
| 15:20.26 | jbowler | I couldn't see any evidence - I thought maybe no newline at the ends of files, or extra blank lines, but all the files are identical (where they should be identical). |
| 15:20.38 | VoodooZ_work | yep. |
| 15:24.10 | *** join/#nslu2-linux [g2] (~g2@g2.nslu2-linux) |
| 15:24.39 | jbowler | Oh well, bbl - more thought required ;-) |
| 15:25.23 | VoodooZ_work | yep. Thanks for the great help. Much appreciated. |
| 15:27.42 | kolla_ | hm, when I try to use bitbake, it says "ERROR: Unable to open conf/bitbake.conf" |
| 15:35.53 | DaKa2 | kolla_: did you source setup-env? |
| 15:38.52 | kolla_ | ah, openslug/setup-env |
| 15:38.55 | kolla_ | nope, thanks |
| 15:39.00 | DaKa2 | :) |
| 15:40.08 | kolla_ | seems like the latest updates fixed the bdb-problems with postfix? |
| 15:49.10 | *** join/#nslu2-linux Tiersten (tman@Tiersten.nslu2-linux) |
| 15:55.03 | *** join/#nslu2-linux kergoth (~kergoth@c-24-118-219-25.hsd1.mn.comcast.net) |
| 15:57.17 | *** join/#nslu2-linux kergoth (~kergoth@c-24-118-219-25.hsd1.mn.comcast.net) |
| 15:59.16 | *** join/#nslu2-linux kergoth (~kergoth@c-24-118-219-25.hsd1.mn.comcast.net) |
| 16:29.44 | DaKa2 | finally one of my slugs have ForcePowerAlwaysOn and ASerialPort |
| 16:40.07 | CIA-8 | 03jp30 * 10unslung/make/abook.mk: strip |
| 16:41.23 | Tiersten | DaKa2: cool |
| 16:43.05 | DaKa2 | now there is just playing with i2c left |
| 16:43.21 | Tiersten | You got the I2C bus extender chips? |
| 16:43.26 | DaKa2 | yup |
| 16:43.48 | DaKa2 | and some other fun stuff, like i2c temp meters |
| 16:44.09 | Tiersten | You done the speed mod? |
| 16:44.09 | DaKa2 | thermal glue and one on the cpu maybe? :-) |
| 16:44.14 | DaKa2 | yup |
| 16:44.29 | DaKa2 | on 2 of my 3 slugs |
| 16:44.50 | *** join/#nslu2-linux jtucker (~NSLU2-IRC@S01060004e2a07457.vc.shawcable.net) |
| 16:46.21 | DaKa2 | oh my god, Im going to melt in here.. need something to drink, brb |
| 16:47.44 | CIA-8 | 03jp30 * 10unslung/make/adns.mk: strip |
| 16:52.47 | *** join/#nslu2-linux rwhitby-away (~rwhitby@rwhitby.nslu2-linux) |
| 17:01.05 | VoodooZ_work | DaKa2, Which method did you use for ForcePOwerOn? I've been waiting to do it on my RoboSlug. |
| 17:01.21 | DaKa2 | I used a pic12f675 |
| 17:01.28 | DaKa2 | with a small program |
| 17:01.44 | DaKa2 | ie, method my own :-) |
| 17:01.48 | VoodooZ_work | i see. |
| 17:01.50 | Tiersten | I was going to do something similar |
| 17:01.59 | Tiersten | And then hook it up to the I2C bus as well |
| 17:02.23 | VoodooZ_work | I use I2C to read a sensor array of 12 Sharp rangers and a motor controller. All custom made with AVRs. |
| 17:03.18 | DaKa2 | I have 8 range sensors and a homebuilt motorcontroller with homebuilt PICs on i2c |
| 17:03.24 | DaKa2 | on my robot |
| 17:03.34 | DaKa2 | using an mini-itx right now |
| 17:04.08 | VoodooZ_work | cool! I didn't know you were building a roboslug too! |
| 17:04.13 | VoodooZ_work | Do you have a web page? |
| 17:04.24 | DaKa2 | nope.. it still cannot move :-) |
| 17:04.32 | VoodooZ_work | mine is at http://robotics.no-ip.org but there's not much on my roboslug yet. |
| 17:04.41 | Tiersten | Put it online |
| 17:04.44 | DaKa2 | havn't really finished the motorcontroller, just a bit left |
| 17:04.51 | Tiersten | And mount a supersoaker |
| 17:04.56 | Tiersten | Then let us drive it around |
| 17:05.06 | DaKa2 | well, its loosly based on oap.sf.net |
| 17:05.10 | DaKa2 | :-) |
| 17:05.17 | VoodooZ_work | I see. |
| 17:05.36 | DaKa2 | I just keep making things differently |
| 17:05.38 | VoodooZ_work | My old robot had a paintball gun and was fully autonomous. |
| 17:05.45 | DaKa2 | haha |
| 17:05.51 | VoodooZ_work | our robotic club called it SplatBot! |
| 17:06.09 | DaKa2 | :) |
| 17:06.12 | kolla_ | :) |
| 17:06.18 | VoodooZ_work | Quite a mess to clean after the fights! |
| 17:06.31 | VoodooZ_work | www.ottawarobotics.org |
| 17:06.57 | DaKa2 | http://david.thg.se/bilder/robot/040806/IMG_1198.JPG <-- old picture of my prototype |
| 17:07.25 | DaKa2 | <-- not a proffesional |
| 17:07.32 | *** part/#nslu2-linux Tiersten (tman@Tiersten.nslu2-linux) |
| 17:07.37 | *** join/#nslu2-linux Tiersten (tman@Tiersten.nslu2-linux) |
| 17:07.52 | *** part/#nslu2-linux jtucker (~NSLU2-IRC@S01060004e2a07457.vc.shawcable.net) |
| 17:08.03 | VoodooZ_work | Me neither! Looks good! I love the prototype look. You'll never see one of my robots with cutesy eyes and stuff. |
| 17:08.34 | VoodooZ_work | My latest looks more professional because I took a long time to design it and had a friend cut the lexan sheets. |
| 17:08.49 | DaKa2 | haha, well, I like my robots big, smart, and ugly |
| 17:08.53 | VoodooZ_work | hehehe |
| 17:08.55 | kolla_ | hehe.. biltema-batterier :) |
| 17:09.04 | Tiersten | You trying to give me neck ache or something? |
| 17:09.05 | DaKa2 | yup :-) |
| 17:09.16 | VoodooZ_work | Mine is kind small because my goal is return to the Trinity firefighting robot competition next april |
| 17:09.21 | VoodooZ_work | hehe |
| 17:09.23 | DaKa2 | VoodooZ_work: I really like SRX2 |
| 17:09.28 | VoodooZ_work | thanks. |
| 17:09.45 | VoodooZ_work | I put a lot more thought into it this time around. |
| 17:09.54 | VoodooZ_work | You learn something with every iteration |
| 17:10.11 | VoodooZ_work | SRX2 is the one using the slug. |
| 17:10.22 | VoodooZ_work | I should really update my web page. |
| 17:10.57 | VoodooZ_work | btw, how can you do image capture of a window in linux? |
| 17:11.07 | DaKa2 | if I ever get this one finished I will make a much better one, I have 200m2 with machines for manifacturing stuff like this |
| 17:11.13 | kolla_ | VoodooZ_work: in X? |
| 17:11.20 | DaKa2 | hm.. ksnapshot, or scrot |
| 17:11.26 | kolla_ | VoodooZ_work: or import |
| 17:11.32 | DaKa2 | yup.. |
| 17:11.45 | VoodooZ_work | cool. |
| 17:11.53 | VoodooZ_work | kolla_, thanks. |
| 17:11.55 | kolla_ | seems like it's time to go home... |
| 17:11.56 | Tiersten | gimp does it as well I think |
| 17:11.58 | kolla_ | bbl :) |
| 17:12.13 | VoodooZ_work | cool. I guess I'll updat my web page with my vision GUI now then... |
| 17:12.39 | VoodooZ_work | brb |
| 17:16.19 | DaKa2 | wtf.. does openslug use dhcp even if you set an ip? |
| 17:17.02 | DaKa2 | not strange it gets permission denied for mounting the root nfs |
| 17:18.14 | DaKa2 | but it comes up with the correct ip later.. |
| 17:18.29 | CIA-8 | 03jp30 * 10unslung/make/expat.mk: stage libexpat.la, but remove host paths first |
| 17:18.32 | DaKa2 | so.. it runs dhcp, tries to mount nfs, and then sets my selected ip.. |
| 17:24.06 | *** join/#nslu2-linux caplink811 (~Joerg@dsl-213-023-128-056.arcor-ip.net) |
| 17:29.59 | *** join/#nslu2-linux kolla__ (kolla@firda.kolla.no) |
| 17:33.20 | kolla__ | *tap tap* |
| 17:34.24 | Tiersten | ? |
| 17:34.38 | kolla_ | --disable-docdir didnt do much for libpam, removing openjade did |
| 17:35.15 | kolla_ | Tiersten: I just pulled my laptop with me from work, wasnt sure if konversation had reconnected to the servers properly :) |
| 17:35.24 | Tiersten | ah |
| 17:42.54 | *** join/#nslu2-linux AdamBaker (~aab@userch028.dsl.pipex.com) |
| 17:43.54 | DaKa2 | anybody know why openslug uses dhcp even when you have setup a static ip? |
| 17:44.21 | VoodooZ_work | there's a wiki page that explains this i believe. |
| 17:44.50 | DaKa2 | hm.. |
| 17:44.53 | VoodooZ_work | IIRC there's an invisible file somewhere that can be removed/added to override the auto-config. |
| 17:45.01 | DaKa2 | I did search.. |
| 17:45.03 | VoodooZ_work | search for sysconf |
| 17:48.31 | DaKa2 | I can only find how to use dhcp.. not the other way |
| 17:48.54 | [g2] | you're using openslug right ? |
| 17:49.05 | [g2] | look in /etc/network/interfaces |
| 17:49.09 | DaKa2 | yup |
| 17:49.34 | DaKa2 | yes? |
| 17:49.50 | DaKa2 | "iface eth0 inet static" |
| 17:49.54 | DaKa2 | no dhcp there.. |
| 17:50.01 | VoodooZ_work | odd |
| 17:50.02 | [g2] | with and address |
| 17:50.07 | [g2] | an |
| 17:50.07 | DaKa2 | yup |
| 17:50.13 | DaKa2 | it sets the ip later in the boot |
| 17:50.29 | DaKa2 | just uses dhcp, tries to mount my nfs root, and then sets the ip |
| 17:50.50 | DaKa2 | and since my nfs server is set to the slugs ip it fails |
| 17:50.52 | [g2] | ahh.. you're booting via nfs |
| 17:50.56 | DaKa2 | yup.. |
| 17:51.09 | DaKa2 | it works without dhcp server.. |
| 17:51.31 | DaKa2 | but why the hell does it even run udhcpc? |
| 17:52.13 | [g2] | dunno, I think mine only runs with dhcp |
| 17:52.48 | [g2] | I haven't played with nfs booting, doesn't that use bootp (and dhcp) ? |
| 17:53.03 | DaKa2 | no.. not at home atleast |
| 17:53.08 | DaKa2 | where I have no dhcp server |
| 17:53.27 | jbowler-away | DaKa2: run turnup init |
| 17:53.52 | DaKa2 | I have.. |
| 17:53.59 | DaKa2 | first thing I did |
| 17:54.04 | DaKa2 | and then turnup nfs |
| 17:54.08 | DaKa2 | same as I did at home |
| 17:54.15 | DaKa2 | where it works :-) |
| 17:54.42 | [g2] | oh what do the kernel messages say ? |
| 17:54.57 | DaKa2 | well, the interesting part: |
| 17:55.02 | DaKa2 | udhcpc[211]: Lease of 10.39.21.32 obtained, lease time 604800 |
| 17:55.02 | DaKa2 | boot: rootfs: mount -t nfs -o nolock,noatime,hard,intr,rsize=1024,wsize=1024 10.39.19.22:/data/slug3 |
| 17:55.05 | DaKa2 | mount: 10.39.19.22:/data/slug3 failed, reason given by server: Permission denied |
| 17:55.23 | DaKa2 | when I loging it has the right ip 10.39.19.81 |
| 17:55.31 | jbowler-away | Ah, ok - nfs. So /boot/nfs before the rootfs is there. |
| 17:56.26 | DaKa2 | but why even run udhcpd? /etc/default/functions line 207? |
| 17:56.48 | jbowler-away | So how does it get a lease if there is no DHCP server? |
| 17:56.50 | DaKa2 | there is one here |
| 17:57.00 | DaKa2 | Im at work, but at home there is none, and it works |
| 17:57.25 | [g2] | it's guess it times out |
| 17:57.30 | [g2] | i'd |
| 17:58.00 | DaKa2 | I could probably ssh home to my slug there and check what it gets |
| 17:58.09 | jbowler-away | It tries once for the DHCP server, if that fails it falls back to the static ip |
| 17:58.29 | DaKa2 | but if I have set a static ip I want that... |
| 17:58.51 | *** join/#nslu2-linux Ksilebo (russ@d14-69-132-59.try.wideopenwest.com) |
| 17:59.58 | jbowler-away | Yes, that's a bug in the bootstrap approach... slugbug |
| 18:01.35 | jbowler-away | It was like that before because bootproto was unreliable, but with turnup init, and given that /boot/network is only run after turnup init has been done, it should be safe to follow it now. |
| 18:01.58 | DaKa2 | is there a bug for it, or should I file one? |
| 18:02.58 | jbowler-away | There isn't one - yes, please enter it. |
| 18:07.13 | *** join/#nslu2-linux [cc]smart (~smart@gw.ptr-62-65-149-158.customer.ch.netstream.com) |
| 18:07.41 | *** join/#nslu2-linux ByronT-Desktop (~chatzilla@ByronT.nslu2-linux) |
| 18:09.53 | CIA-8 | 03jbowler 07org.openembedded.nslu2-linux * r2117dd5b... 10/ (14 files in 11 dirs): |
| 18:09.53 | CIA-8 | propagate from branch 'org.openembedded.dev' (head 026dfb76437b8ee365af6ed7b1a122bd595d202f) |
| 18:09.53 | CIA-8 | <PROTECTED> |
| 18:13.23 | jbowler-away | [cc]smart: good changes in turnup, looks like memstick is now fully supported! I found a couple of problems, slugbugs 192 and 193. 191 is also about the same change but I think I'm wrong (see the bug). 193 is the really significant problem. |
| 18:17.04 | [cc]smart | ok, just read 193. i will be off for 10 minutes. can we discuss this in 10 minutes ? |
| 18:17.42 | [cc]smart | i assume this means yes :) |
| 18:18.56 | jbowler-away | yes |
| 18:35.53 | [cc]smart | back |
| 18:36.03 | [cc]smart | jbowler-away: ping |
| 18:36.31 | jbowler-away | pong |
| 18:37.40 | [cc]smart | when i'm going to mess with populate-var i'd try to change it structurally as to make it work with a config file |
| 18:37.53 | [cc]smart | sounds reasonable/worthwhile ? |
| 18:38.19 | [cc]smart | so that populate-var become like populate-volatile-fs |
| 18:38.22 | jbowler-away | yes - that sounds like a good approach |
| 18:39.14 | [cc]smart | by this we would get populate-var out of this bb file too which i think is hoorible :) |
| 18:39.32 | [cc]smart | now, to check if i understood your suggestion coirrectly |
| 18:39.49 | [cc]smart | populate-volatile should - read from a list of configs |
| 18:39.54 | [cc]smart | check for eixtence |
| 18:39.58 | jbowler-away | It's somewhat odd. I can't see what OE would have any problems with using a config file, just so long as the intelligence in the .bb isn't lost. |
| 18:40.13 | [cc]smart | if not existant it should create what is defined in the configfile |
| 18:40.25 | [cc]smart | if a target is found it should check if it's a symbolic link |
| 18:40.34 | jbowler-away | (I haven't looked at what the bb file actually does, because seeing that it did something fairly gross...) |
| 18:40.41 | jbowler-away | s/because/beyond/ |
| 18:40.43 | [cc]smart | if it's a symbolic link it should create what is defined in the configfile in the target position of the link |
| 18:40.45 | [cc]smart | taht correct ? |
| 18:41.07 | jbowler-away | I think so, a bit like makedevs and /etc/device_table.txt |
| 18:41.38 | [cc]smart | yes i think that's what o understood from device_table.txt |
| 18:41.46 | [cc]smart | s/o/i/ |
| 18:41.54 | [cc]smart | will try that |
| 18:42.03 | jbowler-away | So is the config file just one file, with say a list of directories, or something like /etc/volatile.d/*.conf |
| 18:42.27 | jbowler-away | (The latter approach has the advantage that packages can add directories to /var) |
| 18:42.31 | [cc]smart | now, since it's a change that hits all OE somewhere in a central area, who/how would it be introduced ? |
| 18:42.57 | [cc]smart | i think it should be in /etc/default or such |
| 18:43.05 | [cc]smart | could be a file like: |
| 18:43.28 | [cc]smart | <type of target> <owner> <group> <mode> <target> |
| 18:43.31 | jbowler-away | Write it, put it somewhere (pastebin for example) and then discuss it with mickeyl/koen (i.e. at least one OE core dev) on #oe |
| 18:43.58 | jbowler-away | I don't think they will have any problem with it, given the current approach ;-) |
| 18:43.59 | [cc]smart | one target per line |
| 18:44.34 | jbowler-away | Right, that format is very close to device_table.txt. Another approach would be something like: |
| 18:44.39 | [cc]smart | does he copy nslu2-linux ? |
| 18:44.57 | jbowler-away | <PROTECTED> |
| 18:45.11 | jbowler-away | <PROTECTED> |
| 18:45.16 | [g2] | I'd guess not as he gave up another group to join #nopenslug |
| 18:45.25 | [cc]smart | what does volatile/persistent in this case mean ? |
| 18:45.51 | jbowler-away | Wether it goes in tmpfs or in some form of persistent storage. |
| 18:46.05 | [cc]smart | ah, i think this is not necessary |
| 18:46.11 | jbowler-away | So if it's volatile and /var is on disk then a symlink to /media/ram is needed |
| 18:46.26 | [cc]smart | if it's persistent, it exists alread or, is newly created and becomes persistent |
| 18:46.29 | jbowler-away | Otherwise you have to check for a symlink - which might be more difficult. |
| 18:46.40 | [cc]smart | if it doesn' exist, it's because it hasn't been created or it is volatile |
| 18:47.01 | [cc]smart | i'd like to check for symlink |
| 18:47.04 | jbowler-away | Yes. I think that works. |
| 18:47.24 | [cc]smart | makes it more easy to use i think |
| 18:47.27 | [cc]smart | and more flexible |
| 18:47.55 | jbowler-away | The symlink check is quite easy too. |
| 18:47.59 | [cc]smart | ok. i'll try that |
| 18:48.18 | [cc]smart | do you have a specific suggestion for the check ? |
| 18:48.26 | jbowler-away | Take a look at what I had to do in /etc/init.d/nfsserver - it goes and creates /var/lib/nfs every time (i.e. just like populate-vars.sh) |
| 18:48.56 | jbowler-away | The problem with the symlink check is that not all OE distros have 'readlink' built in. |
| 18:49.33 | jbowler-away | So the easy one is MD(){; if test -h "$1"; then MD "$(readlink "$1")"; else mkdir -p "$1"; } |
| 18:49.57 | *** join/#nslu2-linux Ksilebo^ (russ@d14-69-132-59.try.wideopenwest.com) |
| 18:50.16 | jbowler-away | But if readlink isn't there it becomes a sed of the output of ls -l |
| 18:50.48 | jbowler-away | rl(){; readlink |
| 18:51.22 | jbowler-away | "$@" 2>/dev/null || ls -l "$@" | sed -e 's/^.*-> \(.*\)$/\1/'; } |
| 18:51.54 | [cc]smart | ok... i'l have a try... |
| 18:52.15 | jbowler-away | That latter can be made safer... for l in "$@"; do if test -h "$l" etc |
| 18:53.09 | jbowler-away | How about using /etc/default/*.tmpdir? That way packages can add their own definition. |
| 18:53.59 | jbowler-away | Also turnup can more safely overwrite the default file - /etc/default/var.tmpdir? |
| 18:57.07 | [g2] | mgetty is still borked for me |
| 18:57.17 | [g2] | cp: cannot create regular file `/usr/share/info/_inst.20278_': Permission denied |
| 18:57.45 | jbowler-away | Why is it trying to copy to /? |
| 18:57.57 | [g2] | hence the borkage |
| 18:58.32 | jbowler-away | It looks like a ${D} has got lost, but it's certainly not a general problem. |
| 18:59.42 | [g2] | you mean my mgetty is specail ? |
| 18:59.56 | jbowler-away | Well, why is it trying to write to /? |
| 19:00.13 | [g2] | it's a stright pull from the repo |
| 19:00.17 | [g2] | straight |
| 19:00.30 | jbowler-away | That was a real question... |
| 19:00.56 | VoodooZ_work | DaKa2, Please let me know how your I2C testing goes with the slug as I keep getting issues with mine. |
| 19:01.15 | DaKa2 | ok, when I get time :) |
| 19:01.36 | [g2] | md5sum openembedded/packages/mgetty/mgetty_1.1.30.bb |
| 19:01.36 | [g2] | b8b1dea9e4b7542fa41917a0d23fe0b7 openembedded/packages/mgetty/mgetty_1.1.30.bb |
| 19:01.42 | VoodooZ_work | DaKa2, I think it might be a race condition that leaves my I2C modules irresponsive. I'll try booting the Modules/Slug in different order to see if it helps. |
| 19:02.56 | DaKa2 | ugh... |
| 19:06.31 | jbowler-away | So far as I can see in my mgetty builds nothing uses 'infodir'. It's in run.* but not used, so that's probably your problem. |
| 19:06.50 | jbowler-away | bbl |
| 19:06.57 | [g2] | do you have the same md5 ? |
| 19:07.00 | [g2] | see you |
| 19:08.27 | jbowler-away | I think so (same md5) I'm at 2117dd5b726765202daffe67318297ef78df5a4f, no changes |
| 19:09.07 | [g2] | thx |
| 19:11.03 | *** join/#nslu2-linux Ksilebo^ (russ@d14-69-132-59.try.wideopenwest.com) |
| 19:17.40 | [cc]smart | jbowler-away: i thought about the recursion and currently i'm not sure if this is really needed |
| 19:18.29 | [cc]smart | do you see an actual situation where a link should follow behind another one ? |
| 19:19.20 | [cc]smart | i feel the first link in a hierarchy will perform a switch into a tmpfs or wherever, and what is beyond there is either volatile, and the whole stuff below with it and this can be created there |
| 19:19.42 | [cc]smart | or static and already there |
| 19:23.34 | [cc]smart | for now i assume this recursion is not needed. |
| 19:23.52 | [cc]smart | i'm relatively sure about that, |
| 19:25.34 | *** join/#nslu2-linux Obelisk (russ@d14-69-132-59.try.wideopenwest.com) |
| 19:42.12 | [g2] | NAiL, heh :) |
| 19:42.16 | [g2] | http://groups.yahoo.com/group/nslu2-linux/message/7416 |
| 19:42.20 | NAiL | yes |
| 19:42.25 | NAiL | push them symlinks? |
| 19:42.25 | [g2] | audio should be audiofile |
| 19:42.36 | [g2] | yes and add mpd |
| 19:42.42 | [g2] | to openslug packages |
| 19:42.51 | [g2] | it builds |
| 19:42.55 | NAiL | neat |
| 19:43.34 | VoodooZ_Log | cool |
| 19:43.42 | VoodooZ_Log | What do you use as sound card? |
| 19:44.06 | CIA-8 | 03repvik * r80 10/trunk/openslug/nslu2-linux/packages/ (audiofile flac libao libmad libmikmod libogg libvorbis mpd): Added symlinks for mpd |
| 19:45.16 | [g2] | NAiL, you just needed mpd |
| 19:45.29 | VoodooZ_Log | I might want to add a USB sound card to my roboslug later for speech synt or simply to scare my cat. Any cheap one to recommend? |
| 19:45.42 | [g2] | dunno |
| 19:46.18 | VoodooZ_Log | so that mpd thing is only used for streaming then right? |
| 19:46.18 | NAiL | [g2]: heh, ok. |
| 19:46.51 | [g2] | I think playback |
| 19:47.49 | CIA-8 | 03repvik * r81 10/trunk/openslug/nslu2-linux/packages/ (audiofile flac libao libmad libmikmod libogg libvorbis): Back out all but mpd ;-) |
| 19:48.00 | DaKa2 | anyone working on bug 196? That should be why my whole rebuild fails on postfix.. |
| 19:48.49 | CIA-8 | 03nail 07org.openembedded.nslu2-linux * r2913dd5a... 10/packages/meta/openslug-packages.bb: Added mpd |
| 19:49.44 | [g2] | DaKa2, hmmm postfix builds for me |
| 19:49.58 | [g2] | but mgetty doesn't :) |
| 19:50.11 | DaKa2 | mine doesnt, because pcre dosnt really build correctly in some cases |
| 19:50.21 | DaKa2 | :) |
| 19:50.25 | DaKa2 | my mgetty works... |
| 19:50.28 | DaKa2 | or, builds |
| 19:54.39 | NAiL | [g2]: ah, all the symlinks actually were there for a reason |
| 19:54.54 | [g2] | yes :) |
| 19:54.54 | NAiL | It has a *bunch* of deps |
| 19:55.21 | [g2] | what did you miss ? |
| 19:56.46 | NAiL | You said I just needed mpd, so I thought the rest of the links weren't needed |
| 19:57.52 | [g2] | ah.. no.. all the links and just mpd in the packages |
| 19:58.04 | NAiL | yeah |
| 19:58.45 | NAiL | ;-) |
| 19:58.48 | CIA-8 | 03repvik * r82 10/trunk/openslug/nslu2-linux/packages/ (audiofile flac libao libmad libmikmod libogg libvorbis): Confusion. Now cleared. Links really *are* needed for mpd |
| 20:01.24 | [g2] | do you want to send the e-mail that the package as been added to openslug-packages or should I |
| 20:01.38 | NAiL | I'll do it. It'll be a laugh ;) |
| 20:01.56 | [g2] | and just note that the package audio is really audiofile |
| 20:02.04 | [g2] | THX for all the help |
| 20:03.12 | DaKa2 | [g2]: that script for reading the buildlog and create wiki? |
| 20:03.17 | NAiL | what am I missing here? |
| 20:03.42 | DaKa2 | probably something important.. |
| 20:03.43 | [g2] | DaKa2, one sec |
| 20:03.57 | NAiL | [g2]: You say package "audio" is "audiofile". But the symlink is audiofile. |
| 20:04.48 | NAiL | What am I missing here? |
| 20:05.03 | NAiL | *then* notes he has repeated himself |
| 20:06.16 | DaKa2 | since the original message clearly said audiofile... |
| 20:07.01 | NAiL | yeah |
| 20:07.32 | NAiL | building audiofile right now |
| 20:08.15 | [g2] | DaKa2, see the bottom of http://www.nslu2-linux.org/wiki/OpenSlug/PackageStatus |
| 20:09.10 | NAiL | Ok, it compiles all right |
| 20:09.17 | NAiL | Now I'm off to see a movie. bbl |
| 20:09.27 | DaKa2 | have fun :-) |
| 20:09.46 | DaKa2 | now I only need a complete build log.. |
| 20:10.25 | [g2] | Ok... look again |
| 20:10.36 | [g2] | except for the indent issue I think that's right |
| 20:10.48 | DaKa2 | heh, I copied from edit anyway |
| 20:11.26 | DaKa2 | all my builds the last days have failed on something |
| 20:11.31 | [g2] | you can run that on shortened output and you get the results |
| 20:11.44 | [g2] | abbreviated thought they may be |
| 20:12.53 | [g2] | Is the monotone head messed up ? |
| 20:13.19 | DaKa2 | not now, except me not getting postfix to build |
| 20:14.07 | jbowler-away | VoodooZ_Log: http://www.dcs-online.biz/shop/product_info.php/products_id/4875 (Yoga AD-100) |
| 20:15.26 | jbowler-away | [cc]smart: I agree using mkdir -p directly should always work, I just find the recursive form easier to program and more natural. |
| 20:18.06 | jbowler-away | Daka2: the pcre problem is slugbug #196. I believe it's a make time stamp issue (but I may be wrong), it's intermittent - fails about 1 in 3 for me. |
| 20:18.33 | DaKa2 | hm.. has failed 5/5 times for me, on two build hosts |
| 20:18.45 | jbowler-away | Ah, ok - you can reproduce it ;-) |
| 20:19.03 | DaKa2 | 30 mins ago: 21:48 < DaKa2> anyone working on bug 196? That should be why my whole rebuild fails on postfix.. |
| 20:19.27 | DaKa2 | well, if that is the problem |
| 20:19.31 | jbowler-away | Try putting a sleep 1 before and after the BUILD_CC lines in do_compile. |
| 20:20.11 | DaKa2 | will do.. just tried a make update.. |
| 20:20.19 | jbowler-away | dftables.o gets build, then it gets built again inside the makefile. The one outside is an attempt to fix the problem (the -DLINKS=2) |
| 20:20.19 | DaKa2 | monotone: trying 3-way merge |
| 20:20.19 | DaKa2 | monotone: misuse: no unique private key for cert construction |
| 20:20.19 | DaKa2 | make: *** [update-openembedded] Error 1 |
| 20:20.30 | [g2] | DaKa2, If got the same thing |
| 20:20.35 | [g2] | DaKa2, I've got the same thing |
| 20:20.39 | DaKa2 | :( |
| 20:20.49 | jbowler-away | Need to find out what is causing this... |
| 20:21.00 | DaKa2 | oh well, testingt he sleep 1 thing |
| 20:27.45 | DaKa2 | jbowler-away: are you sure postfix fails because of the pcre issue? sleep 1 didn't help, but the pcre build doesnt complain in any way |
| 20:29.19 | DaKa2 | or, its prce-native I should rebuild? |
| 20:29.29 | DaKa2 | pcre* |
| 20:29.45 | [g2] | DaKa2, rm downloads/pcre...* |
| 20:29.59 | [g2] | whatever the sourceball is and the .md5 |
| 20:30.10 | [g2] | then try to rebuild |
| 20:30.12 | DaKa2 | ok |
| 20:30.33 | DaKa2 | bb -cclean pcre-native pcre && bb pcre-native pcre postfix |
| 20:30.40 | DaKa2 | should work? |
| 20:31.00 | *** join/#nslu2-linux crasher13 (~kchcc@x1-6-00-0f-66-51-86-70.k123.webspeed.dk) |
| 20:31.01 | [g2] | that good too, but it doesn't remove the downloaded file |
| 20:31.11 | DaKa2 | I removed that too |
| 20:31.16 | [g2] | OK |
| 20:32.16 | DaKa2 | still fails |
| 20:32.27 | DaKa2 | "/home/slug/openslug/tmp/staging/i686-linux/bin/postconf: error while loading shared libraries: libpcre.so.0: cannot open shared object file: No such file or directory" |
| 20:32.43 | DaKa2 | but.. libpcre.so.0 exists.. |
| 20:36.56 | DaKa2 | dunno where it tries to load in from though.. |
| 20:40.42 | *** join/#nslu2-linux jbot (ibot@apt.bot.TimRiker.active.supporter.pdpc) |
| 20:40.42 | *** topic/#nslu2-linux is Developer (not end-user) discussion about modifying the Linux operating system on the Linksys NSLU2. Use #nslu2-general for end-user questions. See www.nslu2-linux.org for info, and be sure to read www.nslu2-linux.org/wiki/Main/FAQ before asking questions. |
| 20:41.29 | [g2] | Do we need this: |
| 20:41.33 | [g2] | CONFIG_LEGACY_PTYS=y |
| 20:41.33 | [g2] | CONFIG_LEGACY_PTY_COUNT=256 |
| 20:46.55 | CIA-8 | 03marceln * 10unslung/sources/ipkg-web/package.cgi: Bug fix for package without comment |
| 20:50.21 | *** join/#nslu2-linux marceln (~marceln@pion.xs4all.nl) |
| 20:53.19 | senneth | monotone: verifying new revisions (this may take a while) |
| 20:53.28 | senneth | how log does it usually take? |
| 20:53.47 | dyoung | "a while" is like 15min+ for me. |
| 20:54.03 | senneth | heh, I was running it for about 5hrs |
| 20:54.09 | senneth | and it didn't finished |
| 20:54.21 | ByronT-Desktop | dyoung! morning |
| 20:54.21 | dyoung | bummers! |
| 21:03.46 | eno | senneth, r u running monotone on slug? |
| 21:04.52 | jbowler-away | Daka2: that may be something else. I had problems with pcre-native which was, I believe, built for postfix. The shared library problem is LD_LIBRARY_PATH related - my build environment does an unset of LD_LIBRARY_PATH but it looks like setup-env no longer does this. |
| 21:05.07 | jacques | or on a Pentium200 ? :-) |
| 21:05.27 | eno | i had one native session with "a while" == 2 days, although it eventually finished |
| 21:05.31 | DaKa2 | jbowler-away: o...k... any quick fix? |
| 21:05.46 | jbowler-away | Try 'unset LD_LIBRARY_PATH' then make |
| 21:06.20 | jbowler-away | It's trying to run something from staging, and the prce (native) .so is presumably there too. |
| 21:06.32 | DaKa2 | yup, it is |
| 21:06.58 | senneth | eno: not really, it's a centrino laptop with 1,4GHz CPU and 512MB ram |
| 21:07.08 | DaKa2 | well, my LD_LIBRARY_PATH was empty, but iys unset now |
| 21:07.09 | [cc]smart | jbowler-away: think i have it |
| 21:07.10 | jbowler-away | Problem is on my system it's installed in /usr/lib too... |
| 21:07.26 | DaKa2 | ahh, not on mine, I think.. |
| 21:07.52 | jbowler-away | senneth: an initial setup of the database can take a very long time at the moment |
| 21:08.04 | senneth | ic |
| 21:08.26 | senneth | so i'll leave it running over the night |
| 21:09.01 | jbowler | Hum: temp/log.do_compile.19374:/bin/sh: ./postconf: cannot execute binary file |
| 21:09.57 | DaKa2 | still no go.. |
| 21:10.00 | jbowler | But it built for me... |
| 21:10.53 | jbowler | Yeah, well - the exec of postconf fails, but it is in a pipe so make doesn't care... |
| 21:10.54 | DaKa2 | actually, missed something, in the bottom of the do_compile log: "./postfix-install: Error: "" should be "no" or an absolute path name.", thats probably whats making it fail |
| 21:12.08 | jbowler | Yes, I believe it is broken in the postconf step - it probably needs LD_LIBRARY_PATH on the command line - but it's not causing bb to fail. |
| 21:13.55 | jbowler | What is the argument to postfix-install? (You can see it in work/postfix*/temp/run.do_install*) |
| 21:14.40 | DaKa2 | " sh ./postfix-install 'install_root=/home/slug/openslug/tmp/work/postfix-2.0.20-r0/image' -non-interactive" |
| 21:15.00 | jbowler | Hum - same as mine, and it apparently works. |
| 21:15.14 | DaKa2 | it seems to want some enviorment vars |
| 21:15.44 | DaKa2 | README_DIRECTORY seems to be the one failing |
| 21:15.58 | DaKa2 | (guessing) |
| 21:19.01 | jbowler | Well, I can't see a way of getting the 'Error...' above with -noninteractive set, unless there is something really weird about sh on your system. |
| 21:19.25 | DaKa2 | on my systems.. |
| 21:19.31 | DaKa2 | both debian unstable |
| 21:19.42 | jbowler | Sorry, looking at the wrong line in the script... |
| 21:19.53 | DaKa2 | one really newly updated, one.. long time ago update |
| 21:22.02 | DaKa2 | where the hell does $readme_directory get set in tmp/work/postfix-2.0.20-r0/postfix-2.0.20/postfix-install ? |
| 21:22.37 | jbowler | Line 417 |
| 21:23.06 | DaKa2 | oh.. |
| 21:23.36 | jbowler | eval : ${readme_directory=`<postconf> -d -h readme_directory`} |
| 21:23.47 | jbowler | So it is postconf failing on your system I think. |
| 21:24.26 | DaKa2 | could it be everybody else having libpcre in /usr/lib? |
| 21:24.33 | [cc]smart | late enough now.... n8 all |
| 21:24.39 | DaKa2 | nite nite |
| 21:25.51 | jbowler | <PROTECTED> |
| 21:25.58 | *** join/#nslu2-linux beewoolie-afk (~beewoolie@florence.buici.com) |
| 21:26.07 | jbowler | That works for me and gives me a ('fatal') usage message. |
| 21:26.37 | kolla_ | woohoo.. the build went fine.. finally :) |
| 21:26.44 | jbowler | ldd on that file tells me: |
| 21:26.51 | jbowler | <PROTECTED> |
| 21:27.13 | DaKa2 | libpcre.so.0 => not found |
| 21:27.34 | jbowler | So I think you have a libtool problem maybe... |
| 21:27.45 | DaKa2 | $ ls tmp/staging/i686-linux/lib/libpcre.so.0 -la |
| 21:27.46 | DaKa2 | lrwxrwxrwx 1 slug users 16 Jul 13 23:18 tmp/staging/i686-linux/lib/libpcre.so.0 -> libpcre.so.0.0.1 |
| 21:28.24 | jbowler | Same here. |
| 21:28.27 | DaKa2 | dammit... |
| 21:28.37 | DaKa2 | WHY! OH WHY!!! |
| 21:30.10 | DaKa2 | "LD_LIBRARY_PATH=/home/slug/openslug/tmp/staging/i686-linux/lib/ tmp/staging/i686-linux/bin/postconf --help" works |
| 21:30.40 | kolla_ | ah, that problem |
| 21:30.41 | jbowler | Yes, but why on earth does it work on my system? |
| 21:30.55 | DaKa2 | yes, I would want to know that too |
| 21:31.10 | DaKa2 | kolla_? |
| 21:31.33 | jbowler | I wonder if it still works with my new package/install - because do_stage for postfix-native just uses 'install' |
| 21:31.48 | kolla_ | I..uhm... put /home/slug/openslug/tmp/staging/i686-linux/lib in my /etc/ld.so.conf.. |
| 21:31.53 | NAiL | [g2]: ping? |
| 21:31.59 | [g2] | NAiL, pong |
| 21:32.10 | NAiL | Last year I've been running without legacy PTS |
| 21:32.27 | NAiL | So I think it's safe to drop that support |
| 21:32.52 | NAiL | IIRC, it'll save some 30-40k mem |
| 21:32.53 | [g2] | ok... NAiL can you bop over to #openjtag ? |
| 21:33.08 | [g2] | and a bunch of pid on boot from what I read in lak |
| 21:33.15 | NAiL | sure |
| 21:33.52 | jbowler | monotone: note: branch 'org.openembedded.nslu2-linux' has multiple heads |
| 21:34.04 | DaKa2 | kolla_: can that really be good? |
| 21:34.11 | DaKa2 | it works, but... |
| 21:34.30 | jbowler | Wouldn't work for me - my tmp directory moves around... |
| 21:35.16 | jbowler | DaKa2: do you have packages/install in your working tree? |
| 21:35.32 | DaKa2 | yes |
| 21:36.13 | DaKa2 | I pulled it brand new like 7h ago |
| 21:37.31 | DaKa2 | and make update still fails.. |
| 21:38.11 | kolla_ | DaKa2: I just noticed that the postfix bild complained about not finding libdb-3, I dont have that myself on my system, so I tried setting export a LD_LIBRARY_PAT, but that didnt work either.. finally I just stuffed that path into my ld.so.conf, temporarly |
| 21:38.21 | kolla_ | s/bil/build |
| 21:38.23 | kolla_ | d.. |
| 21:39.15 | kolla_ | not like I'll install postfix anyways :) |
| 21:39.20 | DaKa2 | it works, and I guess that dir will be searched last for libs, so you cannot take over any standard system libs, but still seems wrong.. |
| 21:39.34 | kolla_ | yes, definetly wrong :) |
| 21:39.35 | jbowler | I tried moving my /usr/lib/libpcre.so* but postfix still worked - so I assume ldd isn't lying about where the .so comes from |
| 21:39.40 | DaKa2 | Im not using it either, I just want a complete build to work out of the box |
| 21:39.59 | DaKa2 | this is just so strange.. |
| 21:40.02 | kolla_ | hm, no screen.bb |
| 21:40.08 | kolla_ | *sob* |
| 21:40.12 | DaKa2 | make one? :-) |
| 21:40.16 | kolla_ | yes, |
| 21:40.27 | DaKa2 | screen is a must |
| 21:40.28 | kolla_ | there's normally one in oe |
| 21:41.02 | kolla_ | or.. perhaps not, dont remember |
| 21:41.03 | DaKa2 | in nonworking.. |
| 21:41.20 | DaKa2 | openembedded/packages/nonworking/screen |
| 21:41.23 | kolla_ | odd |
| 21:42.07 | DaKa2 | this postfix stuff is so odd, just cannot understand why it fails for me |
| 21:42.30 | kolla_ | DaKa2: well, did the same here |
| 21:42.53 | DaKa2 | what dist are you running? |
| 21:42.56 | kolla_ | gentoo |
| 21:43.00 | kolla_ | ~x86 |
| 21:43.00 | jbot | extra, extra, read all about it, x86 is this frankinsteins monster of a system compaired to arm. |
| 21:43.03 | DaKa2 | hm.. well, no that then.. |
| 21:43.11 | DaKa2 | not* |
| 21:43.31 | DaKa2 | :)) |
| 21:43.34 | DaKa2 | ~arm |
| 21:43.34 | jbot | i heard arm is both big-endian and little-endian. hh-linux is little-endian |
| 21:44.20 | CIA-8 | 03marceln * 10unslung/ (Makefile make/ipkg-web.mk): |
| 21:44.20 | CIA-8 | ipkg-web is a small shell script as webfront-end for ipkg. |
| 21:44.20 | CIA-8 | Lets all have a critical look at it and decide if it's a |
| 21:44.20 | CIA-8 | good addision for unslung. |
| 21:47.18 | jbowler | DaKa2: the path of the libpcre.so is built in to the postconf executable when it is linked, same with libdb-3.2.so |
| 21:47.44 | DaKa2 | ok... why does it build in the wrong for me? |
| 21:48.00 | jbowler | See what ldd -v outputs - it should give the full path |
| 21:48.31 | jbowler | (But I think it will just say 'not found') |
| 21:48.47 | DaKa2 | yup, not found |
| 21:49.22 | kolla_ | and setting LD_LIBRARY_PATH doesnt work either |
| 21:49.40 | kolla_ | I guess it is re-set inside the build somewhere |
| 21:50.32 | jbowler | <DaKa2> "LD_LIBRARY_PATH=/home/slug/openslug/tmp/staging/i686-linux/lib/ tmp/staging/i686-linux/bin/postconf --help" works |
| 21:50.46 | DaKa2 | jbowler: looking in my postconf I just have libpcre.so.0, no path |
| 21:51.13 | DaKa2 | but not if you set LD_LIBRARY_PATH and then run make |
| 21:51.25 | kolla_ | jbowler: I meant that you cannot "LD_LIBRARY_PATH=.... make openslug" :) |
| 21:51.32 | jbowler | From the postfix-native build: |
| 21:51.35 | jbowler | ccache gcc -DHAS_PCRE -I/home/work-tmp/jbowler/nslu2/openslug/staging/i686-linux/include -O2 -g -O -I. -I../../include -DLINUX2 -o postconf postconf.o ../../lib/libglobal.a ../../lib/libutil.a -lpcre -ldb -lnsl -lresolv -L/home/work-tmp/jbowler/nslu2/openslug/staging/i686-linux/lib -Wl,-rpath-link,/home/work-tmp/jbowler/nslu2/openslug/staging/i686-linux/lib -Wl,-rpath,/home/work-tmp/jbowler/nslu2/openslug/staging/i686-linux/lib -Wl,-O1 |
| 21:52.20 | jbowler | I believe the 'Wl,rpathlink,' stuff is what gets it to work. |
| 21:52.44 | jbowler | And my gcc is: gcc (GCC) 3.3.5-20050130 |
| 21:53.20 | DaKa2 | gcc -DHAS_PCRE -I/home/slug/openslug/tmp/staging/i686-linux/include -O2 -g -O -I. -I../../include -DLINUX2 -o postconf postconf.o ../../lib/libglobal.a ../../lib/libutil.a -L/home/slug/openslug/tmp/staging/i686-linux/lib -lpcre -ldb -lnsl -lresolv |
| 21:53.52 | DaKa2 | gcc version 3.3.4 (Debian 1:3.3.4-7) |
| 21:55.02 | jbowler | No -Wl ! |
| 21:55.15 | DaKa2 | exactly |
| 21:55.30 | DaKa2 | and different order of other commands |
| 21:55.51 | DaKa2 | kindof strange.. |
| 21:56.49 | DaKa2 | WHY!! OH WHY! now it worked.. I did exactly the same as before |
| 21:57.23 | jbowler | And you got the -Wl's added on? |
| 21:57.36 | DaKa2 | yep |
| 21:57.58 | DaKa2 | I think someone is playing with me... |
| 21:58.02 | jbowler | You still have all the evidence, unless you wiped the temp directory - i.e. run.do_compile and log.do_compile |
| 21:58.18 | DaKa2 | well... -cclean does... :-( |
| 21:58.40 | DaKa2 | well, I still have them on my home build host |
| 21:58.42 | DaKa2 | I think |
| 21:59.04 | DaKa2 | but I should probably clean tmp on here and start again, It'll probably fail again |
| 21:59.14 | jbowler | Hum. That's a pity. The -Wl comes from LDFLAGS. The LDFLAGS override the settings in the makefile because of the "-e" in EXTRA_OEMAKE |
| 21:59.40 | jbowler | The other problem in the pcre build (dftables) was because of a -e issue too. |
| 22:01.21 | jbowler | I suspect this is the same - I suspect your old run.do_compile would have shown the correct LDFLAGS. |
| 22:01.36 | DaKa2 | Ill check at my home build |
| 22:02.04 | kolla_ | er, same here |
| 22:02.12 | kolla_ | I rebuildt postfix, and now it worked |
| 22:02.28 | DaKa2 | dammit.. I didn't have it at home |
| 22:02.31 | jbowler | in src/postconf/Makefile the command which links postconf (line 124) corresponds, with the Makefile settings to your failing command. |
| 22:02.51 | kolla_ | and I also now have -Wl, which wasnt there the last time |
| 22:03.23 | jbowler | But run.do_compile overwrites "SYSLIBS" in a way which will only work if -e is on the make command line... |
| 22:03.49 | jbowler | (I.e. it is SYSLIBS in the environment, not LDFLAGS, which actually causes the change.) |
| 22:04.31 | DaKa2 | well, its going to take some time before I can find out.. rebuilding.. |
| 22:05.23 | kolla_ | after having done a complete build.. I guess reflashing is next? |
| 22:06.16 | kolla_ | hm, what decides which of the packages in openembedded/packages are available? |
| 22:06.30 | DaKa2 | oe-symlinks |
| 22:06.39 | jbowler | openslug-packages.bb |
| 22:06.49 | jbowler | If it gets built it is available. |
| 22:06.49 | DaKa2 | and what gets built is openslug-packages.bb |
| 22:07.30 | kolla_ | yes, that I figured out |
| 22:07.30 | DaKa2 | well, you can bb stuff in oe-symlinks, but ok openslug-packages.bb |
| 22:09.55 | DaKa2 | dammit.. now it worked at home too |
| 22:10.22 | DaKa2 | but that was with bb postfix, not make openslug |
| 22:10.25 | kolla_ | hm, so I put twin into openslug-packages.bb.. should be able to "bb twin"? I still got "ERROR: Nothing provides twin" |
| 22:10.40 | DaKa2 | is it in oe-symlinks? |
| 22:10.48 | kolla_ | DaKa2: ah yes, same here.. bb postfix worked |
| 22:11.29 | kolla_ | DaKa2: ah, thanks |
| 22:11.54 | DaKa2 | kolla_: if you put it in oe-symlinks you can bb it, if you put it in oe-symlinks and openslug-packages.bb it gets built by make openslug |
| 22:12.04 | jbowler | Dang. Use 'make -e' not 'make' on the master makefile. |
| 22:12.19 | DaKa2 | you use another master makefile? |
| 22:12.34 | jbowler | No, I use bitbake directly. |
| 22:12.39 | DaKa2 | :) |
| 22:12.56 | DaKa2 | that explains alot |
| 22:13.04 | kolla_ | DaKa2: what I thought |
| 22:13.59 | DaKa2 | jbowler: ok, so, this should probably get fixed somehow... |
| 22:14.44 | jbowler | If it does work with -e and doesn't, reliably, without then the fix is to set MFLAGS, or whatever complexity FSF have come up with. |
| 22:15.08 | DaKa2 | but why are nobody else getting this, just me and kolla_? |
| 22:15.25 | DaKa2 | not everybody runs bb directly? |
| 22:15.42 | [g2] | I do |
| 22:15.46 | DaKa2 | oh my god, that was a bad sentence.. |
| 22:15.50 | [g2] | 95% of the time |
| 22:15.53 | jbowler | Some people haven't pulled in the postfix changes, some people don't use the makefile, some people don't care enough to take any notice. |
| 22:16.21 | DaKa2 | well, make -e is going to take a while |
| 22:16.52 | kolla_ | screen didnt compile, allright :) |
| 22:16.57 | *** part/#nslu2-linux marceln (~marceln@pion.xs4all.nl) |
| 22:16.58 | jbowler | It's like mgetty - it had a similar problem, but running a second time (without cleaning) it worked... |
| 22:17.38 | DaKa2 | thats well, strange.. |
| 22:18.44 | DaKa2 | I like the debian way, everything should build from source in a clean chroot with just build-essentials, but it takes alot of work.. |
| 22:18.45 | jbowler | The first time it made the top level recursively as a side effect of something which had already built. The second time the something had already built, it didn't build it again and made the top level directly - something like that... |
| 22:19.13 | kolla_ | sad thing is that I cannot just install the ipkgs I have buildt now, can I? |
| 22:19.42 | DaKa2 | kolla_: well, have you flashed you slug with a recent openslug firmware? |
| 22:19.52 | kolla_ | define "recent" |
| 22:20.14 | kolla_ | Jun 21 00:46:18 PDT 2005 |
| 22:20.17 | kolla_ | is the kernel |
| 22:20.29 | DaKa2 | well, I dont think the 2.0 beta works because it has an old glibc, but Im not really sure on that |
| 22:20.37 | DaKa2 | anybody? |
| 22:20.40 | kolla_ | yes, exactly.. |
| 22:20.48 | jbowler | I think you will get a new glibc automagically, but no guarantees |
| 22:21.04 | kolla_ | :) |
| 22:21.10 | jbowler | However, the ipkg upgrade would kill all your kernel modules and the system would no longer boot. |
| 22:21.19 | jbowler | Use once and reflash. |
| 22:21.23 | kolla_ | I know I cannot use the kernel modules, since different gcc is used |
| 22:21.24 | DaKa2 | :)) |
| 22:21.38 | DaKa2 | I would suggest a reflash :-) |
| 22:21.51 | kolla_ | jbowler: which is why I never let any silly package manager deal with my kernels :) |
| 22:22.13 | DaKa2 | hm.. debian does it nicly |
| 22:22.22 | kolla_ | well.. "nicely" :) |
| 22:22.33 | DaKa2 | hm.. |
| 22:22.38 | kolla_ | I've had my share with debians mkinitrd :) |
| 22:23.04 | DaKa2 | ? never had any problems.. |
| 22:23.16 | DaKa2 | oh well.. |
| 22:23.22 | kolla_ | when SATA went from being IDE to being "SCSI", it was lots of problems :) |
| 22:23.39 | DaKa2 | ow, well. that probably hurts a bit |
| 22:23.42 | kolla_ | I prefer doing it manually, not like it's any work :) |
| 22:24.23 | kolla_ | hm, gotta read up on how to flash without the webinterface :) |
| 22:24.53 | DaKa2 | should probably get going.. last subway leaves in 20 minutes |
| 22:26.11 | DaKa2 | feels kindof bad staying at work untill 0:29 in the middle of the week when you are on vacation, so, I didn't work , still feels wrong |
| 22:27.03 | [g2] | DaKa2, need broadband at home :) |
| 22:27.43 | DaKa2 | yeah, 24 mbit down is just to bad to have at home |
| 22:29.03 | [g2] | I hear NAiL has 8 |
| 22:29.29 | DaKa2 | what I really need at home is a bigger home, so I can have all the nice toys there instead of at work |
| 22:29.46 | DaKa2 | I have 24mbit down, but only 1 mbit up |
| 22:30.11 | DaKa2 | Im thinging of getting 10/10 |
| 22:30.24 | kolla_ | heh, I've only got 1Mb down and 256k up :| |
| 22:30.35 | kolla_ | *sniff* |
| 22:30.35 | DaKa2 | that would cost about 33USD/month |
| 22:30.47 | kolla_ | 256k up is a pita |
| 22:31.05 | DaKa2 | yup.. I remember, had that 3 years ago.. |
| 22:32.39 | DaKa2 | 100/100 would be 50USB/month, but I really dont need that |
| 22:33.58 | Tiersten | Please form an orderly queue to lynch DaKa2 |
| 22:34.06 | DaKa2 | what? :-) |
| 22:36.08 | DaKa2 | jbowler: make -e makes gcc-cross-initial fail.. |
| 22:36.30 | DaKa2 | but I have to run, bbi45m |
| 22:39.14 | jbowler | DaKa2: ok, that was a bad idea then :-( |
| 22:39.53 | jbowler | The problem just seems to revolve around the files which don't use autotools - mgetty, pcre, postfix |
| 22:41.40 | kolla_ | is it flashing via tftp from redboot that is the norm for openslug users? |
| 22:42.26 | ByronT-Desktop | I've used Sercomm from an XP machine |
| 22:43.09 | kolla_ | dont have serial access :) |
| 22:43.34 | ByronT-Desktop | Sercomm only needs a windows machine on the same subnet |
| 22:43.45 | rwhitby | kolla_: if you have a working OpenSlug 2.0 or later, use reflash. If not. get it into upgrade mode (either by dd or the button on the back) and use SerComm |
| 22:44.00 | ByronT-Desktop | but I would say that a good number of openslug probably use upslug |
| 22:47.14 | kolla_ | aha, a command "reflash" |
| 22:47.51 | kolla_ | nice |
| 22:48.45 | kolla_ | twin compiled nicely, good |
| 22:48.57 | kolla_ | then I can have a desktop on the slug :) |
| 22:59.02 | kolla_ | think I want to alter some stuff in the kernel before I flash |
| 23:05.50 | CIA-8 | 03repvik * r83 10/releases/OpenSlug-2.0-beta/openembedded/site/armeb-linux: Forgot to update site/armeb-linux so samba doesn't break |
| 23:12.52 | CIA-8 | 03repvik * r84 10/releases/OpenSlug-2.0-beta/openembedded/packages/nfs-utils/files/ (. nfsserver): Added the initscript |
| 23:19.47 | *** join/#nslu2-linux senneth (senneth@senneth.staff.irssi) |
| 23:27.13 | DaKa2 | hm.. |
| 23:32.10 | [g2] | DaKa2, around ? |
| 23:32.13 | DaKa2 | yup |
| 23:32.28 | [g2] | you're not going to miss the train are you ? |
| 23:32.33 | DaKa2 | always, except when not |
| 23:32.34 | DaKa2 | Im home |
| 23:32.55 | [g2] | on the postfix issue.. did you do a bb -D > zzz |
| 23:32.57 | DaKa2 | the last one left work 25 mins ago.. |
| 23:33.09 | DaKa2 | uhm, no? |
| 23:33.20 | [g2] | you see bb debugging output |
| 23:33.22 | DaKa2 | but bb postfix works |
| 23:33.34 | [g2] | pcre builds now ? |
| 23:33.41 | DaKa2 | its when you run it from the main makefile.. |
| 23:33.51 | DaKa2 | it was never the problem of pcre for me |
| 23:34.13 | kolla_ | same here |
| 23:34.18 | DaKa2 | but a complete rebuild with make fails |
| 23:34.32 | DaKa2 | on postfix, but bb postfix works |
| 23:34.37 | [g2] | ahh |
| 23:34.38 | DaKa2 | even in a clean tmp |
| 23:34.50 | [g2] | so this is the makefile issue |
| 23:35.08 | DaKa2 | "the" makefile issue? only one :-) |
| 23:35.15 | [g2] | :) |
| 23:35.28 | [g2] | "a" makefile issue :) |
| 23:35.33 | DaKa2 | :)) |
| 23:35.35 | [g2] | "a known" |
| 23:36.11 | DaKa2 | well, any idea what to do? does bb openslug-packages openslug-image do the same as man openslug? |
| 23:36.16 | DaKa2 | make openslug* |
| 23:36.18 | [g2] | Ok... I think it's getting clearer |
| 23:36.34 | [g2] | well openslug-update works right ? |
| 23:36.55 | [g2] | I think ipkg-cl has issues |
| 23:36.59 | DaKa2 | make: *** No rule to make target `openslug-update'. Stop. |
| 23:37.15 | [g2] | update-openslug :) |
| 23:37.19 | DaKa2 | :) |
| 23:37.41 | DaKa2 | make: *** No rule to make target `update-openslug'. Stop. |
| 23:37.52 | DaKa2 | you mean update-openembedded? |
| 23:39.52 | DaKa2 | because that doesn't work.. |
| 23:40.41 | [g2] | so it's the openslug-build that fails |
| 23:41.03 | [g2] | "Don't make me look at that Makefile!" |
| 23:41.07 | [g2] | :) |
| 23:41.11 | DaKa2 | :) |
| 23:41.24 | DaKa2 | openslug-build is the one failing |
| 23:41.37 | DaKa2 | I think |
| 23:41.59 | DaKa2 | build-openslug... |
| 23:44.02 | DaKa2 | hm.. when is make update going to work again? *big smile* :) |
| 23:50.25 | jbowler | DaKa2: is it failing because of the merge (no private key?) |
| 23:50.32 | DaKa2 | yup... |
| 23:51.06 | jbowler | Can you tell me the ancestor revision and the two heads (I'm assuming, since you have no private key, you have no local commits). |
| 23:51.22 | *** join/#nslu2-linux ByronT (~byron-por@ByronT.nslu2-linux) |
| 23:51.24 | DaKa2 | monotone: [source] 2117dd5b726765202daffe67318297ef78df5a4f |
| 23:51.24 | DaKa2 | monotone: [source] 2913dd5a4db27b7b121a13b703b88a41e73464aa |
| 23:51.24 | DaKa2 | monotone: common ancestor 43007d439c7ed96133926d0748cef53fa1b321d0 found |
| 23:51.24 | DaKa2 | monotone: trying 3-way merge |
| 23:51.24 | DaKa2 | monotone: misuse: no unique private key for cert construction |
| 23:51.34 | DaKa2 | nope, nothing local |
| 23:52.20 | jbowler | thx - no saying I can fix it, but to my mind it definately shouldn't be happening and you have the simplest case... |
| 23:52.38 | DaKa2 | :) |
| 23:57.46 | jbowler | Stupid. There's no overlap at all between the different files ancestor->left and ancestor->right. |
| 23:58.10 | DaKa2 | ? |
| 23:59.20 | jbowler | The only change in the second revision is to openslug-packages.bb, the only changes in the right are poodle/zaurus/opie/mplayer. |
