| 00:21.56 | jbowler-away | AF_PACKET is used by dhcp, Mac's do DHCP, therefore AF_PACKET must be supported at some level. |
| 00:22.21 | Tiersten | It might use the BPF library |
| 00:22.29 | jbowler-away | What's that? |
| 00:22.50 | Tiersten | Berkley Packet Filter |
| 00:23.10 | Tiersten | Basically it's a way of getting low level access in a portablish way |
| 00:23.30 | Tiersten | There is a way of getting what we want on the Mac but it's not AF_PACKET because that doesn't exist on the Mac. Not the way Linux does it anyway |
| 00:24.21 | *** join/#nslu2-linux beewoolie-afk (~beewoolie@florence.buici.com) |
| 00:24.21 | jbowler-away | Um, ok - what upslug needs is to send out (and receive) raw IP packets (if I understand the code correctly.) |
| 00:24.31 | Tiersten | It's raw ethernet packets |
| 00:24.44 | jbowler-away | Yes, sorry - you are correct. |
| 00:25.19 | Tiersten | You must be able to do it under OSX. Just don't know what interface they have on it. It's best to just use a packet capture library which has all this stuff built in so we don't need to worry about the specifics |
| 00:25.53 | jbowler-away | Does BPF run on OSX? |
| 00:26.16 | Tiersten | Yes |
| 00:26.48 | ka6sox | since its a BSD boxen. |
| 00:26.53 | jbowler-away | Amusing acronym: British Plastics Federation, Buddhist Peace Fellowship... |
| 00:26.59 | Tiersten | It's not really. It's a hybrid |
| 00:27.16 | ka6sox | right..because of MACHl. |
| 00:27.19 | ka6sox | er MACH. |
| 00:27.36 | Tiersten | It's Mach at the core but with a BSDish layer bolted on top from what I understand |
| 00:27.47 | Tiersten | It's the reason for a recent bug actually. Don't know if Apple have fixed it yet |
| 00:29.44 | Tiersten | Pretty bad bug actually. Let you cause a kernel panic as a normal user |
| 00:36.10 | ka6sox | well...there are funny problems still and there *was* a recent upgrade. |
| 00:37.21 | Tiersten | yeah |
| 00:37.32 | Tiersten | Something is odd with colorsync in Tiger for one |
| 00:38.07 | ka6sox | what is the deal with that???? |
| 00:38.21 | ka6sox | with the Lappy its no problem. |
| 00:38.34 | Tiersten | No clue. It's just messed up under Tiger from what I hear. iPhoto screws up the colours under Tiger |
| 00:38.52 | Tiersten | Does your other machines have a custom colorsync profile loaded specific to that display? |
| 00:39.06 | Tiersten | If you don't have any profile then it doesn't break. At least doesn't visibly break |
| 00:49.34 | eno | just installed tiger today |
| 00:51.05 | ka6sox | ha |
| 00:51.08 | ka6sox | er ah |
| 01:11.01 | jbowler-away | Anyone who does a bk pull will get updated compilers, openslug (and probably unslung) does not build with these. I'm looking for a fix (for the right version to hardwire in). |
| 01:12.47 | jacques | jbowler-away, when did you pull last? |
| 01:13.03 | jacques | and which errors are you seeing? we fixed a problem with gcc-cross last night |
| 01:13.06 | jbowler-away | Shortly after pb checked in the new compilers. |
| 01:13.18 | jbowler-away | He checked them in an hour or so ago. |
| 01:13.25 | jacques | oh |
| 01:13.32 | jacques | even newer compilers? :-\ |
| 01:13.57 | jacques | ah, gcc 4.0.0 |
| 01:14.06 | jacques | I wouldn't expect things to build with that |
| 01:14.08 | jbowler-away | The first problem was that the csl-arm one had a 'DEFAULT_PREFERENCE_armeb', but there's a 3.4.4 too and that doesn't work either. |
| 01:14.30 | jacques | heck I've so far been unable to even build a armeb soft-float cross-toolchain including gcc 4.0.0 |
| 01:14.33 | jbowler-away | No, gcc 4.0.0 is not the issue - there is no gcc-cross-initial_4.0.0 |
| 01:14.56 | jacques | jbowler-away, ok we are going to have to drill down |
| 01:15.45 | jacques | 3.4.4 doesn't do what? doesn't build? doesn't build X app ? |
| 01:15.51 | jacques | unslung/openslug ? |
| 01:15.59 | jbowler-away | 3.4.4 does not build glibc_2.3.2 |
| 01:16.03 | jacques | as OK |
| 01:16.09 | jacques | ah |
| 01:16.22 | jacques | I only tested unslung last night, and 3.4.4 built and the build completed |
| 01:16.31 | jbowler-away | At this point I'm just trying to find the correct syntax to put it back to what it was an hour ago ;-) |
| 01:20.07 | jacques | I just did a pull and see no changes to gcc3.x since last night |
| 01:20.52 | jacques | I'm going to try an opensluyg build to ge the error |
| 01:21.29 | jbowler-away | It's curious because unslung builds glibc too, and I got a failure right at the start. |
| 01:22.29 | jacques | your openslug glibc build failure is right at the start of the glibc build ? |
| 01:22.56 | jbowler-away | It gets multiple symbol definitions - not quite at the start. |
| 01:23.13 | jbowler-away | My bitbake is out of date (was out of date), that may be a problem... |
| 01:23.51 | jacques | hmm, mine isn'ty amazingly new either - tho it does have the RAM usage patches so it's not ancient |
| 01:25.34 | jbowler-away | Well, I'm going to delete all my tmp directories, make sure I've not got any local changes, and try again... |
| 01:26.08 | jacques | yeah, these days I always rm tmp and even .ccache |
| 01:26.10 | jbowler-away | jacques: one question, which version of gcc-cross-initial do you have (i.e. in the unslung build, in work) |
| 01:26.17 | jacques | checking |
| 01:26.39 | jacques | gcc-cross-initial-3.4.4-r0/ |
| 01:27.17 | jbowler-away | Hum. That's weird, I would expect the 3.4.4+cvs version from csl-arm (because it has a DEFAULT_PREFERENCE of 1 on armeb) |
| 01:30.20 | jbowler-away | Here's the problem: ChangeSet@1.3190.1.323, 2005-06-05 21:11:14+01:00, pb@mill.internal.reciva.com |
| 01:30.20 | jbowler-away | <PROTECTED> |
| 01:30.39 | jacques | argh |
| 01:30.59 | jacques | why pb why? |
| 01:31.46 | ka6sox | my thoughts exactly |
| 01:32.40 | jbowler-away | So if it was ok last night before the shufffle and it's not now (assuming I didn't mess something up), then the shuffle is the clue ;-) |
| 01:33.21 | jacques | yeah, if it's trying to use csl-arm (my build hasn't gotten there yet) that's gotta be the problem |
| 01:33.41 | jacques | I don't trust csl-arm one iota for BE |
| 01:34.27 | jbowler-away | Funny thing is I fixed it and tried again, then got the multiple symbol problem - I'll repeat with DEFAULT_PREFERENCE_nslu2 = -1 |
| 01:36.22 | jacques | yeah it looks like it's checking out gcc :-( |
| 01:36.37 | jacques | that's gotta be it - I would bet $$$ that arm-csl has no fscking clue about BE |
| 01:37.20 | jbowler-away | It will fail with an ld error something like 'don't know how to emulate linux-elf, I now about linux-elfb' |
| 01:37.28 | jbowler-away | s/now/know/ |
| 01:39.11 | jacques | yeah, to be clear, when I say "no clue" I mean arm-csl is not tested with BE and does not have the necessary patches |
| 01:39.20 | jacques | (I am speculating) |
| 01:39.54 | jbowler-away | Adding DEFAULT_PREFERENCE_nslu2 = "-1" to the end of gcc_csl-arm-20050603.bb should stop it using the csl-arm version. |
| 01:40.09 | jacques | OK I'll try that after my build fails |
| 01:40.31 | jbowler-away | I'll tell you if mine fails first (I have that change) ;-) |
| 01:41.24 | jacques | mine is still cvs co'ing gcc |
| 01:43.35 | jacques | NOTE: package gcc-cross-initial-3.4.4+csl-arm-20050603-r0: task do_compile: started :-\ |
| 01:43.49 | jacques | i wish pb was around |
| 01:46.52 | jacques | NOTE: package glibc-2.3.2+cvs20040726-r17: task do_compile: started |
| 01:47.19 | jacques | NOTE: package glibc-2.3.2+cvs20040726-r17: task do_compile: failed |
| 01:47.30 | jbowler-away | linux-elfb? |
| 01:47.41 | jacques | /home/packages/oe/nslu2/bb_openslug_default/tmp/cross/lib/gcc/armeb-linux/3.4.4/../../../../armeb-linux/bin/ld: unrecognised emulation mode: armelf_linux |
| 01:47.41 | jacques | Supported emulations: armelfb_linux armelfb |
| 01:47.49 | jacques | it's missing a damn patch |
| 01:48.00 | jacques | because nobody uses arm-csl for BE |
| 01:55.03 | NAiL | ka6sox: ping? |
| 01:55.25 | *** join/#nslu2-linux Jacmet (~jacmet@50C59F0E.flatrate.dk) |
| 01:56.29 | jacques | looks like arm-csl is missing all the BE patches |
| 01:57.00 | jacques | who knows what else - I see no softfloat patch either |
| 02:10.15 | jbowler-away | jacques: my glibc-2.3.2+cvs20040726 build succeeded this time (with gcc-3.4.4), at least to do_package. |
| 02:13.54 | *** join/#nslu2-linux glc (~glc@glc.nslu2-linux) |
| 02:16.59 | jacques | jbowler-away, ok good |
| 02:19.52 | jbowler-away | Do you know what the license on upslug is? |
| 02:20.13 | jacques | no, I haven't looked at it in a really long time |
| 02:20.53 | jbowler-away | It's not explicit in the source, but it's part of the sourceforge nslu2 project and that's "bsd, gpl" - I'm not sure which applies to upslug... |
| 02:21.46 | jacques | :-\ it really should be spelled out - that's an omission |
| 02:23.37 | jbowler-away | I guess the decision lies with Christopher_bbl: I'm trying to build it along with openslug, so I need to put something in the .bb file. |
| 02:24.07 | jacques | this is vaguely familiar - I think the question has come up before |
| 02:26.17 | jbowler-away | My guess is that 'bsd' is the preference but that 'gpl' is there because anything derived from gpl can't be un-gpl'ed. |
| 02:29.57 | Christopher | back |
| 02:30.02 | Christopher | for a bit |
| 02:30.25 | jacques | Christopher, so what is the upslug license? |
| 02:30.40 | Christopher | that's an interresting question, i had never thought about it |
| 02:31.24 | Christopher | what is the other slug stuff like slugimage under? |
| 02:32.11 | jacques | slugimage is bsd |
| 02:34.30 | Christopher | hmmmm what's major difference between bsd and gpl? |
| 02:34.38 | Christopher | or should I google it :-) |
| 02:34.43 | jbowler-away | no copyleft (on bsd) |
| 02:35.09 | Christopher | i c |
| 02:37.24 | Christopher | then let's make upslug bsd |
| 02:37.35 | jacques | BSD licensed code can be used in proprietary apps without the requirement of distributing the code - only attribution has to be maintained |
| 02:37.42 | Christopher | do I need to do anything to make it that? |
| 02:37.51 | jacques | no, just put it in the code header |
| 02:37.56 | Christopher | oik |
| 02:37.59 | jacques | probably copy from some other BSD code |
| 02:38.06 | Christopher | sounds good to me |
| 02:38.18 | Christopher | I'll try to get that done tomorrow evening |
| 02:38.20 | Tiersten | You're okay with the binary only dist part? |
| 02:38.50 | Christopher | i'll do a little more research and then decide tomorrow evening |
| 02:39.04 | Tiersten | For example, sercomm are perfectly okay to do some changes and then just put up a binary on their website and not give out any code. They just have to say that you wrote it originally |
| 02:39.19 | Christopher | mmmm i c |
| 02:40.16 | jbowler-away | www.opensource.org has both the relevant licenses. |
| 02:40.20 | Christopher | I'll try to figure out the licencse then, now to bed before my first day as a NASA intern |
| 02:46.21 | Tiersten | good luck |
| 02:47.27 | jbowler-away | jacques: openslug tries to build gcc-cross-4.0.0 too (and fails 'GMP wth MPFR support is required to build f95' in do_configure.) |
| 02:48.56 | jbowler-away | I wonder how much F95 code we have in openslug... |
| 03:00.54 | jbowler-away | The gmp build needs --enable-mpfr |
| 03:09.32 | CIA-8 | 03jbowler * 10upslug/ (Makefile upslug.c): |
| 03:09.32 | CIA-8 | Correct -Wall -Os warnings in upslug.c |
| 03:09.32 | CIA-8 | Make the makefile work with bitbake (install target) |
| 03:26.29 | jacques | jbowler-away, hmm, why's it trying to build gcc 4.0.0? that will never work :-( |
| 03:27.14 | jacques | I don't think oe should be defaulting to gcc4 |
| 03:27.19 | jacques | for any arch |
| 03:28.12 | jbowler-away | It looks like pb has mpfr installed on his machine (so the build of the FORTRAN compiler works), the build itself isn't looking in staging at do_compile. |
| 03:28.23 | jbowler-away | Still, it's a moot point if it won't work anyway. |
| 03:28.34 | jbowler-away | I'll just put in a DEFAULT_PREFERENCE_nslu2 there too... |
| 03:31.05 | jacques | looks like we have a lot to bring up with pb when he gets back |
| 03:31.54 | jbowler-away | My build is back to 3.4.4 now |
| 03:32.20 | jacques | good |
| 03:34.30 | jacques | from this, http://gcc.gnu.org/ml/gcc/2005-06/msg00123.html it looks like gcc4 is not ready for production use |
| 03:34.37 | jacques | (as we probably all guessed) |
| 05:27.45 | ka6sox-away | NAiL, |
| 05:27.48 | ka6sox-away | pong |
| 05:47.26 | *** join/#nslu2-linux jf-work (~none@jeanfabrice.nslu2-linux) |
| 06:03.09 | *** join/#nslu2-linux eno-away (~eno-away@adsl-216-100-134-134.dsl.snfc21.pacbell.net) |
| 06:26.45 | *** join/#nslu2-linux rwhitby-web (www-data@netblock-66-159-209-60.dslextreme.com) |
| 06:28.23 | *** join/#nslu2-linux mr_claus (random@p54991B3D.dip0.t-ipconnect.de) |
| 06:28.38 | mr_claus | morning |
| 06:31.50 | rwhitby-web | jbowler-away: can you please push your PREFERENCE patches ? |
| 06:31.54 | jbowler-away | bk changeset 1.3434 allows NSLU2 (openslug, unslung) builds to work again... |
| 06:32.28 | jbowler-away | rwhitby-web - ;-) I'd pushed them about 10seconds before you spoke... |
| 06:32.29 | rwhitby-web | cool - I didn't see any CIA so I wasn't sure if you'd pushed or not (can't pull from here) |
| 06:32.51 | rwhitby-web | so we're back to 3.4.4 ? |
| 06:33.15 | jbowler-away | Yes, 3.4.4 on cross-initial and cross (also the openslug-packages gcc builds will use that). |
| 06:33.27 | rwhitby-web | thx |
| 06:33.43 | rwhitby-web | BTW, what's your opinion on the maintenance mode vs upgrade mode question? |
| 06:34.31 | jbowler-away | One thing about maintenance mode - if you use tmpfs rather than ext2/dd there's a lot more space available in the rootfs. |
| 06:36.16 | jbowler-away | I'm not really familiar with the unslung situation. On openslug it's possible to reflash from any non-jffs2 root (so long as there is sufficient space for the image.) |
| 06:38.30 | jbowler-away | So far as I can see it's going to be really exceptional for an openslug user to run from jffs2, and such a user will probably want complete control of any upgrade process (i.e. having an automated 'upgrade' from jffs2 root is probably a waste of time.) |
| 06:43.04 | rwhitby-web | the Unslung situation is that the Linksys web upgrade program (for which we do not have source code) goes and checks the free memory before it creates an 8MB upload temp ramdisk. |
| 06:43.20 | mr_claus | the ldconfig package was checked in last week, i installed the package and now i get a segfault while logging in with ssh or telnet, the webui is not working too, perhaps a segfault too |
| 06:43.23 | rwhitby-web | Unfortunately, it doesn't take into account memory that is temporarily in buffers or cache. |
| 06:43.27 | mr_claus | could it be a problem with ldconfig? |
| 06:43.32 | rwhitby-web | and so it refuses to upgrade |
| 06:44.13 | jbowler-away | ;-) Oops. |
| 06:44.15 | rwhitby-web | jbowler-away: so we actually have plenty of space in RAM, but the linksys app refuses to use it |
| 06:44.46 | rwhitby-web | and whether or not you get a successfull upgrade depends on how much RAM has been used during the boot for cache and buffers. |
| 06:44.52 | jacques | ugh |
| 06:45.11 | rwhitby-web | I personally have not been able to get a single maintenance mode upgrade to work once you have installed 4.20 |
| 06:45.39 | jbowler-away | You can probably free the memory by int main(void) { (void)malloc(8*1024*1024); exit(0); } |
| 06:46.09 | jbowler-away | ... it might be necessary to touch the pages to be sure... |
| 06:47.13 | rwhitby-web | jbowler-away: yeah, we used to do that, and I'm not sure if it's still in 4.20 or not. That might be the problem. |
| 06:47.37 | rwhitby-web | we had a upgrade-real.cgi |
| 06:48.46 | jbowler-away | WRT your original ML posting (which I have only just read - I'm a bit behind), I think it's fine so long as there is a reasonable way of making binary upslugs available. |
| 06:49.27 | rwhitby-web | yeah, we would get people to create RPMs or .debs or .ebuilds or whatever for all the major distros |
| 06:49.44 | jbowler-away | The RedBoot upgrade can be exited (safely) just by pulling the power plug, but obviously that won't help if mtdblock5 has been zeroed. |
| 06:50.45 | jbowler-away | upslug in my experience used to be pretty flakey - with my changes I find it reliable, but I don't know how many people have tested the new version. |
| 06:51.38 | rwhitby-web | I can't use upslug cause my linux development box is behind a VMWare NAT |
| 06:51.49 | jacques | real men use tftp |
| 06:51.56 | jbowler-away | Hum. My openslug 3.4.4 build does not boot (it's died inside rcS.d). |
| 06:52.05 | jacques | :-\ |
| 06:52.26 | rwhitby-web | jacques: yeah, if I have serial on the box I use tftp. If I don't have serial, I zero mtdblock5 and use the SerComm tool |
| 06:52.51 | rwhitby-web | I'm getting so used to the SerComm method that I'll probably start using that exclusively. |
| 06:53.20 | jacques | jbowler-away, I hope the compiler isn't misbehaving - I noticed some strange differences in what appeared to be the only differing patch between 3.4.3 and 3.4.4 |
| 06:54.19 | jacques | I'm doing an openslug build right now, after pulling the latest gcc preference fixes |
| 06:54.32 | jbowler-away | jacques: I had also made changes to the bootstrap because there was an order change in OE initscripts, but that shouldn't have caused this hang. |
| 06:55.01 | jacques | jeez, you;d think they wouldn't change everything at once |
| 06:55.51 | dyoung | rwhitby-web, someone already posted the Packages parser to the ML. |
| 06:56.23 | dyoung | rwhitby-web, I also pretty much use the upslug method all the time for firmware changing now. |
| 06:57.21 | jbowler-away | jacques: it was a very minor change, just moved hostname.sh to a lower level (S39 from S40). I'm pretty sure it doesn't matter, my uclibc rootfs/etc and openslug rootfs/etc match. |
| 06:57.51 | jbowler-away | jacques: do you have a serial console on your NSLU2? |
| 06:58.21 | jacques | jbowler-away, I do indeed - on both |
| 06:59.03 | rwhitby-web | dyoung: yeah, perlguru posted the perl script :-) |
| 06:59.04 | jbowler-away | That's good. I've just got a flashing LED ;-) I'm going to add some codes on disk1/2 to see where it hangs but this is a slow process... |
| 06:59.28 | dyoung | Oh, I was thinking that name was familiar.... |
| 06:59.29 | jacques | jbowler-away, well I did suggest morse... :-) |
| 06:59.54 | rwhitby-web | dyoung: did you see all the r29 stuff there now |
| 06:59.56 | jacques | I'll try the latest image as soon as it finishes building |
| 07:00.05 | dyoung | I saw it in a bulk changeset. |
| 07:00.06 | jacques | and let you know |
| 07:00.24 | rwhitby-web | we just need Tiersten to add the usb devices patch, and we've got a real R29-based unslung without the genesys rubbish they did |
| 07:00.51 | rwhitby-web | we should then benchmark that with and without the interrupt-driven ixp driver |
| 07:01.13 | rwhitby-web | next thing I'm going to do is put dropbear into the image |
| 07:02.30 | rwhitby-web | and make the uNSLUng password stick everywhere |
| 07:03.02 | jbowler-away | If you have dropbear it's possible to auto-flash just by 'scp zImage /boot/zImage' and have a watcher process pick it up and flash (devio) it into the correct places. |
| 07:03.02 | dyoung | bbl |
| 07:03.25 | rwhitby-web | jbowler-away: not on a running jffs2 though |
| 07:03.43 | rwhitby-web | but yeah, with an external rootfs we could do that |
| 07:03.43 | jbowler-away | right... that's the precondition. |
| 07:04.02 | rwhitby-web | that's why I want to get rid of the linksys web upgrade interface, so that we can eventually put a proper one in there. |
| 07:04.26 | jbowler-away | Hum. No it works on a running jffs2 rootfs (if there's space for the image) - just mount -o ro / |
| 07:05.00 | rwhitby-web | jbowler-away: do we have devio in the unslung firmware yet? |
| 07:05.02 | jbowler-away | ... probably not reliable though |
| 07:05.21 | rwhitby-web | you should make it a separate .bb and we will add it to unslung too |
| 07:05.25 | jbowler-away | devio: I'm moving it into a separate package |
| 07:05.41 | rwhitby-web | cool - when you do, please add it to unslung |
| 07:06.03 | jbowler-away | In unslung-image? |
| 07:06.08 | rwhitby-web | then you'll have to teach me how to use it one day |
| 07:06.12 | rwhitby-web | yeah, in unslung-image |
| 07:06.25 | jbowler-away | I was going to write a man page too ;-) |
| 07:06.25 | rwhitby-web | I assume it's pretty small |
| 07:06.48 | rwhitby-web | ok, I'll be back later on .. |
| 07:06.51 | *** part/#nslu2-linux rwhitby-web (www-data@netblock-66-159-209-60.dslextreme.com) |
| 07:07.07 | jbowler-away | It's 25540 bytes with the built-in help. The help text is about 10kbytes |
| 07:25.14 | jbowler-away | Well, it is hanging at S40networking, I may have damaged the udhcpc script (since I boot with DHCP). |
| 07:38.06 | jacques | my build is still going |
| 07:40.36 | jbowler-away | The udhcpc script isn't even running on my system - so there is a hang before ifup tries to start it. |
| 07:44.12 | jacques | hmm, I have static IPs on my slugs |
| 07:45.59 | jbowler-away | Yes, it's hanging in ifup, so I'll swap back to static and see it that helps... |
| 07:48.19 | jacques | hmm, so what does openslug use the linksys firmware for ? |
| 07:48.29 | jacques | my openslug build is downloading R29 |
| 07:49.05 | dyoung | that sounds like a bug |
| 07:49.09 | jbowler-away | RedBoot |
| 07:49.31 | dyoung | Oh yeah, we put it back in there dont we\/. |
| 07:50.03 | jbowler-away | Yes, along with SysConf. Some brave person with JTAG could try just putting /dev/zero in there - it should work ;-) |
| 07:51.40 | jacques | well the way I flash it would work - fis write -f 0x50060000 -b 0x01060000 -l 0x7a0000 |
| 07:51.57 | jacques | flashing |
| 07:53.07 | jacques | booting... |
| 07:54.04 | jacques | CRAP |
| 07:54.20 | jbowler-away | Hung? |
| 07:54.29 | jacques | crap crap crap |
| 07:55.02 | jacques | Alignment trap: ifup (799) PC=0x40140784 Instr=0xe5903004 Address=0xbeffff2a FSR 0x013 |
| 07:55.10 | jacques | it's scrolling that so fast I can barely copy it |
| 07:55.41 | jbowler-away | Well, that's easy to turn off - alignment.sh |
| 07:55.41 | jacques | (if I quit minicom it clears the screen) |
| 07:56.09 | jacques | oh lol |
| 07:56.17 | jacques | I hadn't thought to try ctrl-C |
| 07:56.28 | jacques | that snapped it out of it |
| 07:57.07 | jbowler-away | But why would a compiler change create a mis-aligned access... |
| 07:57.45 | jacques | network modules aren't loaded |
| 07:59.40 | jbowler-away | They wouldn't be if ifup crapped out before it touched eth0 |
| 07:59.50 | jacques | even lo isn't up |
| 08:00.32 | jbowler-away | Same problem then - ifup is failing. Try echo 0 >/proc/cpu/alignment then re-run ifup -a |
| 08:00.45 | jacques | ok, trying |
| 08:01.10 | jacques | root@LKG0FB08F:/lib/modules/2.6.11.2/kernel/drivers/net# ifup -a |
| 08:01.10 | jacques | Segmentation fault |
| 08:01.24 | jacques | something is fscked |
| 08:02.36 | jbowler-away | ifup is in busybox (well, ifup is busybox) |
| 08:02.54 | jacques | I manually configured eth0 and it works |
| 08:03.39 | jbowler-away | Ok, I remember seeing the add of "patches/ifupdown-spurious-environ.patch" |
| 08:04.19 | dyoung | "you make it, we break it guaranteed!" |
| 08:05.23 | jacques | why are fat and vfat modules autoloaded ? |
| 08:05.35 | jacques | I don't want/need those autoloaded |
| 08:05.41 | jacques | this is new I think |
| 08:06.11 | jbowler-away | Because you didn't specify -t to turnup? |
| 08:06.53 | jbowler-away | It should only happen if you do 'mount /dev/sda2' (etc) and rely on the kernel to work out what type of FS it is. |
| 08:07.16 | jacques | I haven't tried to mount anything, and don't have a disk attached |
| 08:07.16 | jbowler-away | I did fix turnup though so it doesn't do it (it always passes -t to mount). |
| 08:07.55 | jbowler-away | The patch removes 'static char **environ = NULL' from ifupdown.c (!) |
| 08:08.40 | jacques | lol |
| 08:08.52 | jacques | nice |
| 08:10.55 | jbowler-away | I don't see why the environ it picks up in exchange should be non-aligned (though obviously that would explain everything.) |
| 08:11.28 | jacques | wish I had strace installed already |
| 08:12.41 | jbowler-away | Ah... "add gcc4 patches", and it is one of them. It clearly isn't spurious, since it hides the extern environ ;-) |
| 08:16.22 | jacques | ok this is bad |
| 08:16.26 | jacques | strace used to work |
| 08:16.30 | jacques | now I get: |
| 08:16.40 | jacques | root@LKG0FB08F:/var/tmp# strace ls |
| 08:16.40 | jacques | execve("/bin/ls", ["ls"], [/* 9 vars */]) = 0 |
| 08:16.40 | jacques | syscall: unknown syscall trap 0xe5bcf620 |
| 08:17.00 | jacques | WTF |
| 08:17.59 | jacques | NOTE: Applying patch 'arm-syscallent.patch' |
| 08:18.03 | jacques | apparently that did little good |
| 08:18.18 | jacques | seems like all the oe patches are screwing us |
| 08:19.23 | jacques | why didn't it apply the other two patches in the dir: arm-compilation.patch arm-syscall.patch |
| 08:20.22 | jbowler-away | It was changed on April 1 ;-) |
| 08:21.17 | jbowler-away | The change seems not to have been any change though. strace doesn't seem to have changed for a long time. |
| 08:21.38 | jbowler-away | My openslug is now past rcS (having un-spurioned the static char **environ) |
| 08:21.40 | jbowler-away | Booted. |
| 08:21.56 | jacques | I thought this was a new version of strace from what I used last |
| 08:22.35 | jacques | damn there are so many oe issues I am forgetting them |
| 08:22.38 | jbowler-away | Ah. The old one might have been bk rm'ed |
| 08:23.23 | jacques | so how do we get that patch removed for our build? |
| 08:23.26 | jbowler-away | Weird. Somehow during the boot ext3, ext2, and all the fats do get loaded. |
| 08:23.38 | jbowler-away | patch: I'll commit my change. |
| 08:23.56 | jacques | which file did you change? the busybox .bb ? |
| 08:24.05 | jacques | put in a special case for NSLU2 ? |
| 08:26.59 | jbowler-away | Yes - changeset 1.3435 (just pushed) |
| 08:27.14 | jacques | 'k thanks |
| 08:28.13 | jacques | got it |
| 08:29.02 | jbowler-away | There's going to be a merge conflict on that file when OE fixes it, but it should be fairly obvious how to resolve it. |
| 08:29.14 | jacques | i agree |
| 08:42.32 | jacques | flashing new image |
| 08:45.07 | jacques | looking much better |
| 08:46.05 | jacques | it's up with network interfaces |
| 08:46.17 | jacques | still has those ugly fat modules tho :-P |
| 08:46.48 | jbowler-away | And ext2/ext3 |
| 08:47.36 | jbowler-away | Ah, it's that 1 block initrd which isn't anything. |
| 08:48.40 | jbowler-away | No. It isn't that - if I boot off (reiserfs) disk nothing is mounted. |
| 08:48.56 | jbowler-away | s/mounted/loaded/ |
| 08:50.31 | jacques | yeah I have the ext[23] modules loaded too |
| 08:56.25 | jbowler-away | I bet it's the 'mount -o remount' in /etc/init.d/checkroot.sh |
| 08:58.09 | jacques | you think it goes through vfat and ext2 before getting to jffs2 ? |
| 08:58.14 | jacques | could be |
| 08:59.05 | jbowler-away | Yes - change 'auto' in /etc/fstab (on the flash partition) to 'jffs2' and the modules aren't loaded. |
| 09:00.16 | jbowler-away | That's an easy fix. |
| 09:00.34 | jbowler-away | Time for bed... |
| 09:00.56 | jacques | nice work jbowler-zzz sleep well |
| 09:34.59 | dyoung | Attempting a build now. |
| 09:37.12 | rwhitby | finally got my wl530g today |
| 09:37.41 | jacques | cool |
| 09:37.41 | rwhitby | just deciding whether to put it in as the internet router unchanged, allowing me to hack more on the wiley, or whether to open it up |
| 09:38.49 | rwhitby | or alternately recompile the firmware for it with dropbear included .... |
| 09:45.43 | rwhitby | it's got the nice asus restore mode, so bricking is not a concern |
| 09:46.02 | rwhitby | and I do really need to fix the timezones on it anyway ... |
| 09:54.19 | rwhitby | ooh - I just telnetted to it and got a command line |
| 09:54.31 | rwhitby | Sash command shell (version 1.1.1) |
| 09:54.40 | dyoung | jacques, any new leads for some LWSF Action? |
| 09:55.20 | rwhitby | Linux version 2.4.22-uc0 (root@localhost.localdomain) (gcc version 2.95.3 20010315 (release)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClinux XIP and shared lib patches from http://www.snapgear.com/)) #1369 Wed Aug 18 21:32:58 CDT 2004 |
| 09:56.08 | jacques | coldfire - I thought that was a motorola thing |
| 09:56.17 | jacques | dyoung not yet :-\ |
| 09:56.32 | rwhitby | coldfire is a Motorola/Freescale thing |
| 09:57.47 | jacques | isn't that a MIPS device? |
| 09:57.56 | jacques | the wl530g |
| 10:08.08 | rwhitby | http://www.chupa.nl/phpwiki/index.php/WL530g |
| 10:08.20 | rwhitby | will update that as I learn more tonight |
| 10:09.38 | dyoung | Did you void the warranty to take some internal pictures yet? |
| 10:10.32 | rwhitby | the FCC entry has internal pictures |
| 10:10.34 | dyoung | IIRC, ColdFire is BE also. |
| 10:11.03 | rwhitby | ColdFire is a 68K-style instruction set, not MIPS, nor ARM |
| 10:11.05 | dyoung | do you have the FCC Link handy? |
| 10:11.20 | rwhitby | nope, but I remember it was easy to find on the fcc site |
| 10:12.08 | rwhitby | MSQ is the Asus id |
| 10:12.20 | rwhitby | so it's probably MSQWL530G |
| 10:12.41 | jacques | yeah I am just wondering why that kernel has the coldfire patches |
| 10:13.07 | rwhitby | https://gullfoss2.fcc.gov/prod/oet/cf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=983996&fcc_id='MSQWL530G' |
| 10:13.22 | rwhitby | photos at https://gullfoss2.fcc.gov/prod/oet/forms/blobs/retrieve.cgi?attachment_id=483265&native_or_pdf=pdf |
| 10:14.19 | rwhitby | bbiab |
| 10:14.55 | dyoung | weird, that one looks like the pictures for the 500. |
| 10:15.56 | rwhitby | hmm - that's not riht |
| 10:15.58 | rwhitby | right |
| 10:18.48 | rwhitby | https://gullfoss2.fcc.gov/prod/oet/cf/tcb/reports/Tcb731GrantForm.cfm?mode=COPY&RequestTimeout=500&application_id=903874&fcc_id=MSQWL530G |
| 10:18.54 | rwhitby | https://gullfoss2.fcc.gov/prod/oet/forms/blobs/retrieve.cgi?attachment_id=495191&native_or_pdf=pdf |
| 10:20.07 | rwhitby | double decker PCB |
| 10:20.37 | rwhitby | bbiab |
| 10:24.21 | dyoung | Maybe it is a coldfire in there, no pics with the sheild off of the CPU board. |
| 10:24.47 | dyoung | that kind of makes it interesting as another BE toy. |
| 10:27.03 | *** join/#nslu2-linux Ksilebo^ (russ@d14-69-185-70.try.wideopenwest.com) |
| 10:28.06 | *** join/#nslu2-linux Tiersten (tman@Tiersten.nslu2-linux) |
| 10:28.06 | *** join/#nslu2-linux ziL (~zil@1-1-3-11a.ars.sth.bostream.se) [NETSPLIT VICTIM] |
| 10:31.11 | *** join/#nslu2-linux Tiersten_ (tman@Tiersten.nslu2-linux) |
| 10:32.18 | *** join/#nslu2-linux widrone (~tommyw@65.80-203-228.nextgentel.com) [NETSPLIT VICTIM] |
| 10:32.24 | *** join/#nslu2-linux d|dge (~didge@2001:960:624:1:0:0:0:1) [NETSPLIT VICTIM] |
| 10:32.54 | *** join/#nslu2-linux caplink811_log (~caplink81@213.23.142.42) [NETSPLIT VICTIM] |
| 10:33.21 | *** join/#nslu2-linux ziL (~zil@82.182.89.40) [NETSPLIT VICTIM] |
| 10:33.53 | rwhitby | dyoung: all the pictures are there - you can even read the chips |
| 10:34.42 | rwhitby | marvell 88w8510 |
| 10:34.58 | *** join/#nslu2-linux ziL (~zil@82.182.89.40) [NETSPLIT VICTIM] |
| 10:34.58 | *** join/#nslu2-linux caplink811_log (~caplink81@213.23.142.42) [NETSPLIT VICTIM] |
| 10:34.58 | rwhitby | http://www.marvell.com/products/wireless/libertas/Libertas_88W8000G_88W8510.pdf |
| 10:35.09 | rwhitby | jacques: I too wonder why it has coldfire patches |
| 10:35.25 | rwhitby | I expect they are unrelated |
| 10:35.39 | *** join/#nslu2-linux jf-work (~none@81.56.191.205) [NETSPLIT VICTIM] |
| 10:36.06 | *** join/#nslu2-linux VoodooZ_Log (~VoodooZ@CPE00c0f021712c-CM014110003785.cpe.net.cable.rogers.com) [NETSPLIT VICTIM] |
| 10:36.58 | *** join/#nslu2-linux glc (~glc@glc.nslu2-linux) [NETSPLIT VICTIM] |
| 10:37.19 | *** join/#nslu2-linux VoodooZ_Log (~VoodooZ@CPE00c0f021712c-CM014110003785.cpe.net.cable.rogers.com) |
| 10:38.50 | rwhitby | I added cat /proc/kmsg to the wiki page at http://www.chupa.nl/phpwiki/index.php/WL530g |
| 10:39.26 | *** join/#nslu2-linux jf-work (~none@81.56.191.205) [NETSPLIT VICTIM] |
| 10:39.26 | *** join/#nslu2-linux ziL (~zil@82.182.89.40) [NETSPLIT VICTIM] |
| 10:39.26 | *** join/#nslu2-linux caplink811_log (~caplink81@213.23.142.42) [NETSPLIT VICTIM] |
| 10:40.45 | dyoung | Those coldfire patches must have been added as part of the standard uclinux build. |
| 10:41.38 | jacques | how'd your builds go? |
| 10:42.00 | dyoung | unslung finished |
| 10:42.18 | jacques | cool |
| 10:42.18 | rwhitby | modutils-cross failed for unslung for me |
| 10:42.27 | dyoung | Its still working on openslug |
| 10:42.37 | dyoung | I didnt actually flash these images yet though. |
| 10:45.31 | jacques | I'll try an unslung build |
| 10:50.47 | rwhitby | directory contents for wl530g are up (if anyone is still interested - let me know if you still are) |
| 10:54.44 | dyoung | sounds like a fun toy. |
| 11:10.00 | rwhitby | it's just the thrill of the chase at the moment :-) |
| 11:13.01 | dyoung | Yeah, its true. |
| 11:13.38 | dyoung | I'm still tempted to buy a 2nd Actiontec for "testing". |
| 11:13.57 | dyoung | openslug built. |
| 11:26.46 | jacques | modutils failed for me too in unslung |
| 11:27.41 | jacques | openembedded/packages/modutils/files/gcc4.patch is not there |
| 11:28.41 | jacques | gcc4.patch is in modutils-2.4.27/ I dunno why the build isn't finding it |
| 11:34.48 | dyoung | wonder why it worked for me.... |
| 11:35.55 | jacques | how new is your bitbake? |
| 11:36.25 | dyoung | $ bitbake --version |
| 11:36.25 | dyoung | BitBake Build Tool Core version 1.2.2, bitbake version 1.2.9 |
| 11:36.53 | dyoung | I pilfered it from nudi around 1.5 weeks ago |
| 11:37.29 | dyoung | (it was one of the times that berlios svn was down) |
| 11:38.13 | jacques | ok so that's probably not it then |
| 11:38.38 | jacques | bitbake --version |
| 11:38.38 | jacques | BitBake Build Tool Core version 1.3.0, bitbake version 1.3.1 |
| 11:39.13 | dyoung | interesting. |
| 11:44.18 | *** join/#nslu2-linux dzlabing (~dietmar@62.116.5.130) |
| 11:45.38 | *** join/#nslu2-linux Ksilebo (russ@d14-69-185-70.try.wideopenwest.com) |
| 11:56.43 | dyoung | night jacques |
| 12:26.31 | dyoung-zzzz | any unslung packge experts around? |
| 12:27.40 | CIA-8 | 03jeanfabrice * 10unslung/Makefile: Promote Neon, clips and sed for wiley |
| 12:34.53 | *** join/#nslu2-linux jf-work (~none@jeanfabrice.nslu2-linux) |
| 12:36.41 | dyoung-zzzz | jf-work, youre a unslung package expert right? |
| 12:37.00 | jf-work | dyoung-zzzz.. humm not as good as jp30 I think |
| 12:39.10 | dyoung-zzzz | Drat. hes on travel, so i cant bug him now. |
| 12:39.57 | jf-work | okay. He's the wizard and I'm the pupil so maybe I have a chance to help you |
| 12:40.30 | dyoung-zzzz | I'm just trying to clean up some of the mess I made some months ago. |
| 12:40.57 | dyoung-zzzz | ctrlproxy. I revisited it. |
| 12:41.11 | *** join/#nslu2-linux caplink811 (~Joerg@dsl-082-082-083-030.arcor-ip.net) |
| 12:41.33 | dyoung-zzzz | its busted for reasons that completely escape me; becuase it builds as a openslug package okay. |
| 12:43.00 | jf-work | dyoung-zzzz: the problem is on your build env ? |
| 12:43.25 | jf-work | and it doesn't build as an unslung optware ? |
| 12:44.31 | dyoung-zzzz | It gives me a whole slew of error messages. |
| 12:45.33 | jf-work | How can I help you ? do you want me to try building it on my own env. ? |
| 12:49.38 | *** join/#nslu2-linux caplink811_log (~caplink81@dsl-082-082-083-030.arcor-ip.net) |
| 12:50.33 | dyoung-zzzz | I am a bit curisous if it will build for wiley.... |
| 12:51.04 | jf-work | I can check |
| 12:52.43 | jf-work | cvs does not have sources/ctrlproxy |
| 12:59.22 | jf-work | crtlproxy.mk reference configure.in.patch. do we need or is it a typo ? |
| 13:00.31 | dyoung-zzzz | oh well. |
| 13:00.35 | dyoung-zzzz | I guess I'll give up for now |
| 13:05.23 | CIA-8 | 03jeanfabrice * 10unslung/Makefile: Promote postgresql, rrdtool and libart for wiley |
| 13:10.15 | CIA-8 | 03jeanfabrice * 10unslung/Makefile: correct typo in an optware name for wiley |
| 13:25.35 | mr_claus | what could be the reason of segfaulting all apps after unsling? |
| 13:27.36 | rwhitby | what version of unslung firmware? |
| 13:27.58 | mr_claus | 4.20b |
| 13:28.09 | rwhitby | from the binary download? |
| 13:28.23 | mr_claus | yes |
| 13:28.35 | rwhitby | with a newly formatted disk? |
| 13:28.39 | mr_claus | but the apps are not segfaulting while running |
| 13:28.56 | mr_claus | the apps are segfaulting if i want to telnet or ssh to my box |
| 13:29.11 | mr_claus | the the disk contains data, there is no way to format the disk |
| 13:30.03 | rwhitby | and you ran "/sbin/unsling disk1" ? |
| 13:30.13 | mr_claus | yes |
| 13:30.51 | rwhitby | did you have any directories in the data partition which had the same name as the directories in the root filesystem? |
| 13:30.59 | mr_claus | but i installed the package ldconfig, perhaps that's the problem |
| 13:31.45 | mr_claus | no definitly not, but it would be better to copy the rootfs into /share/hdd/data/unslung instead of /share/hdd/data |
| 13:31.48 | rwhitby | well, that should be an easy theory to test |
| 13:31.58 | mr_claus | but there is no directory with the same name on my disk |
| 13:32.24 | rwhitby | what happens if you ipkg remove ldconfig? |
| 13:33.56 | mr_claus | thats not possible at the moment because i can only boot without a disk attached |
| 13:34.17 | mr_claus | i connect the disk after booting but then it's not mounted at the right place |
| 13:34.48 | rwhitby | look in the .ipk file to see what it installs, and then remove those files manually |
| 13:35.05 | rwhitby | (assuming it didn't overwrite anything outside of /opt) |
| 13:39.01 | mr_claus | i could do a mount -o bind /share/hdd/data/opt /opt |
| 13:39.44 | mr_claus | hmm, but the ipkg database is wrong then |
| 13:41.00 | mr_claus | the dirty way could be a chroot /share/hdd/data |
| 13:41.10 | mr_claus | if i do that then the package list is ok |
| 13:41.31 | mr_claus | should i do a chroot then remove the package and then exit? |
| 13:42.33 | rwhitby | dunno - I know nothing about the ldconfig package |
| 13:44.21 | mr_claus | Aiee, segfault! You should probably report this as a bug to the developer |
| 13:44.21 | mr_claus | Connection to 10.20.10.100 closed. |
| 13:44.27 | mr_claus | it's the same |
| 13:44.33 | mr_claus | must be another reason |
| 13:45.00 | rwhitby | start with a clean slate (reinstall firmware), and step forward until it reoccurs |
| 13:46.26 | mr_claus | :/ |
| 13:47.34 | rwhitby | that's why we mark it as beta .... |
| 13:54.44 | *** join/#nslu2-linux cbrake (~cbrake@cpe-204-210-216-174.neo.res.rr.com) |
| 13:58.25 | CIA-8 | 03unslung * 10unslung/package-strip.pl: Added |
| 14:07.30 | mr_claus | there is no problem with a beta, but i installed it twice and got two several problems, i think it's the wrong way to reinstall the firmware, is there a better way to debug the problem? |
| 14:09.18 | rwhitby | unpack the ldconfig .ipk file and see what it installed. Look at the postinst script to see what it did. Undo those things. |
| 14:15.44 | mr_claus | ok, i mounted the disk and the conf part and run dropbear manually and dont fork it into background |
| 14:15.58 | mr_claus | [720] Jun 06 15:21:54 Not forking |
| 14:15.58 | mr_claus | [721] Jun 06 15:21:56 Child connection from 10.20.2.100:51934 |
| 14:15.58 | mr_claus | [721] Jun 06 15:22:00 password auth succeeded for 'root' |
| 14:15.58 | mr_claus | [721] Jun 06 15:22:01 syslogin_perform_logout: logout(ttyp1) returned an error: No such file or directory |
| 14:15.58 | mr_claus | [721] Jun 06 15:22:01 exit after auth (root): Exited normally |
| 14:16.21 | mr_claus | that is the screen of the box |
| 14:16.31 | mr_claus | Aiee, segfault! You should probably report this as a bug to the developer |
| 14:16.31 | mr_claus | Connection to 10.20.10.100 closed. |
| 14:16.36 | mr_claus | thats the message at the client |
| 14:57.24 | *** join/#nslu2-linux jbowler (~jbowler@jbowler.nslu2-linux) |
| 15:36.03 | *** join/#nslu2-linux mrblack51 (~foo@pool-71-113-0-240.sttlwa.dsl-w.verizon.net) |
| 15:41.39 | *** join/#nslu2-linux mrb51 (~foo@pool-71-113-0-240.sttlwa.dsl-w.verizon.net) |
| 15:41.48 | *** part/#nslu2-linux mrb51 (~foo@pool-71-113-0-240.sttlwa.dsl-w.verizon.net) |
| 15:50.00 | mr_claus | which files should be in /share/hdd/conf? |
| 15:50.34 | mr_claus | or better question, what is "format disk" of the webinterface doing with the conf partition? |
| 16:05.44 | *** join/#nslu2-linux ByronT (~chatzilla@ByronT.nslu2-linux) |
| 16:12.59 | mr_claus | please can anybody take a look into /share/hdd/conf and tell me the few files which are in there? |
| 16:27.48 | caplink811-away | mr_claus: unslung4.2? |
| 16:27.58 | mr_claus | yes |
| 16:28.17 | mr_claus | but i only need to know whats copied to the partition to get the disk working again |
| 16:28.28 | mr_claus | i deleted my conf stuff and dont find the backup files |
| 16:28.53 | mr_claus | i dont need the config, i can configure it new but i want to use the disk again without formatting |
| 16:29.58 | caplink811-away | mr_claus: http://www.jrbnet.de/texte/ll.txt |
| 16:30.51 | caplink811-away | mr_claus: without .sda2root .unslung initrd |
| 16:31.23 | mr_claus | thx |
| 16:33.14 | mr_claus | whats inside of the subdirs? |
| 16:35.39 | caplink811-away | mr_claus: same link |
| 16:39.13 | mr_claus | whats in share.info? is there an information about the disk? |
| 16:40.35 | caplink811-away | we should change the chanel to #nslu2-german, may be easier, and more on topic |
| 16:54.20 | *** join/#nslu2-linux droemel (ident@p548EA090.dip0.t-ipconnect.de) |
| 16:55.05 | *** part/#nslu2-linux droemel (ident@p548EA090.dip0.t-ipconnect.de) |
| 17:39.54 | *** join/#nslu2-linux [g2] (~g2@g2.nslu2-linux) |
| 18:01.27 | *** join/#nslu2-linux Jacmet (~jacmet@50C59F0E.flatrate.dk) |
| 18:50.32 | caplink811-away | ~seen bob_tm |
| 18:50.49 | jbot | bob_tm <~chatzilla@181.80-203-27.nextgentel.com> was last seen on IRC in channel #nslu2-linux, 12d 7h 19m 41s ago, saying: 'Thanks!!'. |
| 18:54.36 | *** join/#nslu2-linux [cc]smart (~smart@gw.ptr-62-65-149-158.customer.ch.netstream.com) |
| 19:16.02 | *** join/#nslu2-linux senneth (senneth@senneth.staff.irssi) |
| 19:38.51 | CIA-8 | 03ingeba * 10unslung/make/inetutils.mk: Added zlib to dependency list, since it would be used if staged before Inetutils configure is run |
| 19:44.28 | *** join/#nslu2-linux glc (~glc@glc.nslu2-linux) |
| 21:06.26 | *** join/#nslu2-linux mrblack51 (~foo@pool-71-113-0-240.sttlwa.dsl-w.verizon.net) |
| 21:11.16 | *** join/#nslu2-linux mrb51 (~foo@pool-71-113-0-240.sttlwa.dsl-w.verizon.net) |
| 21:19.06 | *** join/#nslu2-linux mrblack51 (~foo@pool-71-113-0-240.sttlwa.dsl-w.verizon.net) |
| 21:19.13 | *** join/#nslu2-linux mrb51 (~foo@pool-71-113-0-240.sttlwa.dsl-w.verizon.net) |
| 22:05.22 | *** join/#nslu2-linux mrb51 (~foo@pool-71-113-0-240.sttlwa.dsl-w.verizon.net) |
| 22:11.03 | jacques | mr_claus should try removing /etc/ld.so.cache |
| 22:18.29 | *** join/#nslu2-linux mrblack51 (~foo@pool-71-113-0-240.sttlwa.dsl-w.verizon.net) |
| 22:22.56 | *** join/#nslu2-linux mrb51 (~foo@pool-71-113-0-240.sttlwa.dsl-w.verizon.net) |
| 22:32.15 | *** join/#nslu2-linux mrblack51 (~foo@pool-71-113-0-240.sttlwa.dsl-w.verizon.net) |
| 22:41.41 | jacques | Applying 1 revisions to packages/modutils/files/gcc4.patch |
| 22:41.49 | jacques | i guess modutils should build again - I will try |
| 22:43.43 | *** join/#nslu2-linux mrb51 (~foo@pool-71-113-0-240.sttlwa.dsl-w.verizon.net) |
| 22:45.02 | jacques | starting fresh unslung-image build |
| 22:57.09 | *** join/#nslu2-linux mrb51 (~foo@pool-71-113-0-240.sttlwa.dsl-w.verizon.net) |
| 23:25.53 | *** join/#nslu2-linux rwhitby-web (www-data@netblock-66-159-209-60.dslextreme.com) |
| 23:26.50 | Tiersten | hey rwhitby |
| 23:39.45 | jacques | my fresh unslung-image build completed |
| 23:40.19 | rwhitby-web | yeah, mine just finished too |
| 23:40.41 | jacques | mine woulda been faster but it had to download R29 :-) |
| 23:40.44 | [g2] | was that a wipe of tmp or just a pull and build ? |
| 23:41.10 | jacques | wipe of tmp and ccache |
| 23:41.16 | jacques | as usual for me |
| 23:41.21 | [g2] | cool |
| 23:52.55 | rwhitby-web | mine was just a pull |
| 23:53.22 | jacques | starting fresh clean openslug-image build |
| 23:57.03 | rwhitby-web | heh - I have the patience of a saint :-) |
| 23:57.16 | [g2] | you do |
| 23:57.28 | [g2] | I read many of your responses on the ml :) |