| 00:08.07 | *** part/#nslu2-linux rwhitby-treo (~upirc@rwhitby.nslu2-linux) |
| 00:55.59 | *** join/#nslu2-linux bob_tm-away (~chatzilla@82.171.35.169) |
| 00:57.44 | *** join/#nslu2-linux VoodooZ_Hockey (~stephane6@CPE00c0f021712c-CM014110003785.cpe.net.cable.rogers.com) |
| 01:25.13 | *** join/#nslu2-linux ByronT-Laptop (~byron-por@adsl-220-252-175.bhm.bellsouth.net) |
| 02:06.46 | ByronT | [g2], where's my os *good* binary? Frankenslug is sitting next to me - booted up w/o hd attached... |
| 02:08.11 | [g2] | ByronT, did you build OpenSlug ? |
| 02:08.28 | ByronT | ran into too many problems with colinux |
| 02:09.03 | ByronT | I can go at it again... (Fun!) |
| 02:09.31 | [g2] | I'm 95% of the way there to having the LEDs working on bootup |
| 02:09.40 | ByronT | I can wait... :) |
| 02:09.51 | ByronT | FrankenSlug isn |
| 02:09.56 | [g2] | Ok, I'll keep you posted |
| 02:09.58 | ByronT | 't complaining |
| 02:20.06 | rwhitby-away | OpenSlug is bulding again :-) |
| 02:21.09 | [g2] | rwhitby-away, good |
| 02:21.30 | [g2] | rwhitby-away, there are 2 things I'd like to add to OpenSlug for the Beta |
| 02:21.51 | [g2] | 1/ make shutdown -h actually power-down the slug |
| 02:23.10 | [g2] | 2/ have the ability to reflash the jffs2 and kernel |
| 02:23.27 | [g2] | I think we have the capability to reflash jffs2 from recovery mode |
| 02:26.03 | [g2] | and I can adapt or add another script to allow the kernel to be reflashed |
| 02:27.06 | *** join/#nslu2-linux ByronT_ (~ByronTodd@adsl-220-252-175.bhm.bellsouth.net) |
| 02:28.46 | [g2] | hmmm.... I think I need to think about the trailer bits a little more |
| 02:28.59 | *** part/#nslu2-linux ByronT_ (~ByronTodd@adsl-220-252-175.bhm.bellsouth.net) |
| 02:33.49 | rwhitby-away | [g2]: is the reflashing essentail for the beta - why not just ues the normal redboot flash procedure for the whole lot? |
| 02:34.49 | rwhitby-away | I agree for shutdown to power down, but again, it's a bit nice-to-have compared to the beta? |
| 02:34.50 | [g2] | rwhitby-away, that's fine except some ppl may have to switch networks |
| 02:35.11 | [g2] | well the power-down is a very simple change |
| 02:35.13 | rwhitby-away | yep, but they need to do that today with unslung, so they're used to it :-) |
| 02:35.27 | [g2] | really ? |
| 02:35.36 | [g2] | that's the upgrade path ? |
| 02:35.50 | rwhitby-away | cool - anything that is simple and can be done while we're waiting for other things to fall in place is fine |
| 02:36.04 | rwhitby-away | well, actually, no. they can upgrade through the web |
| 02:36.45 | rwhitby-away | i just don't want that to delay the beta release - we should have frequent beta's for openslug, but we need to get the first one out ... |
| 02:37.04 | ka6sox-away | as long as OpenSlug doesnt' fiddle with partitions the regular flash should work? |
| 02:37.15 | rwhitby-away | yep |
| 02:38.16 | rwhitby-away | so the recovery procedures on the wiki work fine for openslug, and are sufficient for an openslug beta (where camp#2 is assumed to be able to get to redboot) |
| 02:38.27 | rwhitby-away | ~nslu2-camps |
| 02:38.28 | jbot | well, nslu2-camps is 1: want full linksys compatibility (including future releases), can load image through web and telnet in to run ipkg, have no clue about redboot, 2: can telnet into redboot and use linux, 3: power user, but no jtag and no custom redboots, 4: bleeding edge - custom redboots, no need or desire for linksys compatibility |
| 02:38.58 | rwhitby-away | we're intending to exclude camp#1 from openslug beta, right? |
| 02:39.32 | [g2] | rwhitby-away, NOD. |
| 02:42.14 | rwhitby-away | so, what's the latest on udev - do we know how it's supposed to work, and why it doesn't? |
| 02:43.54 | *** join/#nslu2-linux dyoung-web2 (www-data@netblock-66-159-209-60.dslextreme.com) |
| 02:44.29 | rwhitby-away | bbiab |
| 02:45.04 | ByronT | about using Redboot to upgrade - it's not that big of a deal (changing networks), since you have to do that the first time you setup the nslu2 anyway |
| 02:45.47 | [g2] | rwhitby-away, gone ? |
| 02:46.14 | ByronT | sorry - I was gone for a bit to show a friend the iMac... |
| 02:48.03 | peteru-home | possibly tty/pty entries too - I guess anything that's needed before udev creates the rest |
| 02:48.59 | peteru-home | ee - checking size of short... configure: error: can not run test program while cross compiling |
| 02:48.59 | peteru-home | make[1]: *** [/home/slug/sourceforge/unslung/builds/libogg/.configured] Error 1 |
| 02:54.34 | *** join/#nslu2-linux rwhitby-treo (~upirc@rwhitby.nslu2-linux) |
| 02:55.55 | rwhitby-treo | so what's the plan on udev? |
| 02:58.09 | ka6sox-away | bbiab |
| 02:59.23 | [g2] | rwhitby-treo, I think we hack the BT device and work on fixing udev in the backround |
| 02:59.35 | [g2] | I've got a hack for the leds device |
| 03:00.55 | rwhitby-treo | ok, can you hack rfcomm0 for me too? |
| 03:01.11 | [g2] | it's a trival hack |
| 03:01.13 | rwhitby-treo | are there any others that are missing? |
| 03:01.33 | [g2] | right before I call the leds program the code goes ... |
| 03:01.52 | [g2] | if [ ! -e /dev/leds ] |
| 03:01.52 | [g2] | then |
| 03:01.52 | [g2] | <PROTECTED> |
| 03:01.52 | [g2] | <PROTECTED> |
| 03:01.52 | [g2] | fi |
| 03:02.18 | rwhitby-treo | yeah, but I can't do irc and pssh on the treo at the same time :-) |
| 03:03.04 | rwhitby-treo | shouldn't we put it in the devices script instead? |
| 03:03.17 | [g2] | no, no, silly, I can add mknod /dev/rfcomm0 for you |
| 03:03.29 | rwhitby-treo | ... no h |
| 03:03.35 | peteru-home | rwhitby-treo: is the above any help? |
| 03:03.47 | rwhitby-treo | dunno |
| 03:04.47 | [g2] | rwhitby-treo, what's the type Major/Minor for rfcomm0 ? |
| 03:04.55 | peteru-home | rwhitby-treo: quick question. I am seeing "checking size of short... configure: error: can not run test program while cross compiling" while building libogg. |
| 03:05.03 | peteru-home | How do I tell configure what the answer is? |
| 03:05.36 | rwhitby-treo | it seems that currently openslug is not detecting that udev is in use and is just manually creating the devs in a ramfs mount |
| 03:05.36 | rwhitby-treo | so we either make an openslug version of the device table in initscripts, or we fix udev. |
| 03:05.36 | rwhitby-treo | we shouldn't be creating dev entries in scripts elsewhere g2 |
| 03:06.11 | rwhitby-treo | c 216 0 - are you going to put it in initscripts? |
| 03:06.35 | [g2] | rwhitby-treo, we should, but for the next week until we fix udev properly it'll work |
| 03:06.49 | rwhitby-treo | if not, then leave it and I'll do it in initscripts |
| 03:06.54 | [g2] | rwhitby-treo, I'll added to the sysconfigsetup script |
| 03:07.15 | [g2] | sysconfsetup |
| 03:07.21 | rwhitby-treo | (i.e. we go back to manual dev entries and do that properly at least) |
| 03:07.45 | rwhitby-treo | g2 - no hacks in OpenSlug! |
| 03:08.25 | [g2] | rwhitby-treo, this isn't a big hack |
| 03:08.34 | rwhitby-treo | do leds in initscripts |
| 03:08.43 | rwhitby-treo | little hacks are worse |
| 03:08.57 | [g2] | all the hacks are in one spot |
| 03:09.03 | [g2] | all in openslug-init |
| 03:09.34 | rwhitby-treo | doesn't matter - leds and rfcomm0 should be done in initscripts with the rest of the devices |
| 03:10.07 | rwhitby-treo | we need to get a beta out, but we need to do it properly |
| 03:11.28 | [g2] | rwhitby-treo, we are doing things properly. I think changing the device model every has been running with immediately before Beta is improper |
| 03:11.44 | rwhitby-treo | cause then voodoozlug can use it too |
| 03:14.31 | rwhitby-treo | not changing it - putting the additional entries in the spot which is being used now (not udev) |
| 03:14.31 | rwhitby-treo | putting dev/led in openslug-init is a hack which we cannot allow |
| 03:14.54 | rwhitby-treo | make and openslug subdir in initscripts, copy the device-table.txt in initscripts down into that dir, add entries, done. |
| 03:16.35 | [g2] | rwhitby-treo, the code is already written and tested for the leds |
| 03:16.52 | rwhitby-treo | is my connection still up? |
| 03:17.05 | [g2] | you connection ? |
| 03:17.23 | [g2] | your connection ? |
| 03:17.36 | *** part/#nslu2-linux rwhitby-treo (~upirc@rwhitby.nslu2-linux) |
| 03:17.53 | [g2] | I guess not :( |
| 03:27.54 | CIA-11 | 03g2 07 * r1.2881 10openembedded/packages/ (5 files in 3 dirs): Add LED indications on boot |
| 03:38.53 | *** join/#nslu2-linux dyoung-web (www-data@netblock-66-159-209-60.dslextreme.com) |
| 03:51.56 | [g2] | ByronT, around ? |
| 04:04.29 | rwhitby-away | [g2]: add it to this file: |
| 04:04.50 | CIA-11 | 03rwhitby 07 * r1.2883 10openembedded/packages/initscripts/initscripts-1.0/openslug/device_table.txt: Added an openslug-specific device_table.txt in initscripts |
| 04:06.02 | [g2] | rwhitby-away, you must have missed changeset 1.2881 it's been in for 30 minutes |
| 04:06.34 | [g2] | Next time I change openslug-init can can remove those 4 lines and move it over |
| 04:06.46 | rwhitby-away | saw that, but that's not the right place to add dev leds |
| 04:06.49 | rwhitby-away | cool |
| 04:07.23 | [g2] | long-term correct. Next 48-72 hours it's a perfect place |
| 04:07.44 | rwhitby-away | I respectfully disagree |
| 04:07.49 | [g2] | ByronT, is ready to an hour or two ago and I was in the middle get getting that ready |
| 04:08.25 | [g2] | We've been known to do that every now and then |
| 04:08.28 | [g2] | :) |
| 04:09.29 | [g2] | I'm writing up the TurnUp proceedure for the Beta to bring up the HD or Flash stick after boot |
| 04:10.34 | rwhitby-away | k |
| 04:13.01 | giel | morning |
| 04:13.13 | [g2] | giel, morning sunshine |
| 04:13.28 | giel | *yawn* actually i should get some sleep |
| 04:15.18 | ByronT | here! |
| 04:15.31 | rwhitby-away | [g2]: where are the four lines that add /dev/leds? |
| 04:15.54 | ByronT | was away from comp having a Sam Adams Holiday Porter |
| 04:17.10 | [g2] | rwhitby-away, it's actually 5 lines in the file leds_rs_green in openslug-init subdir |
| 04:17.47 | [g2] | ByronT, is frankenslug serial enabled ? |
| 04:17.56 | [g2] | or do you want to try it without serial |
| 04:19.08 | ByronT | frankenslug is scheduled for serial surgery but has not gone under the procedure yet |
| 04:19.34 | [g2] | So punk, I've only got one question for you.... |
| 04:19.42 | [g2] | Do you feel lucky ? |
| 04:19.42 | ByronT | do I feel lucky? |
| 04:19.50 | [g2] | LOL |
| 04:20.05 | [g2] | Classic |
| 04:20.16 | [g2] | I know what you're thinking |
| 04:20.19 | ByronT | binary me |
| 04:20.47 | ByronT | frankenslug is sitting here without hd attached |
| 04:20.57 | [g2] | right |
| 04:21.03 | ByronT | need me to be in redboot, right |
| 04:21.16 | [g2] | no you can flash from the Web interface |
| 04:21.29 | [g2] | you've got a Static IP setup |
| 04:21.37 | ByronT | yes... 1.77 |
| 04:21.44 | [g2] | ok |
| 04:21.57 | [g2] | I'll bzip2 the flash image |
| 04:22.05 | ByronT | but is that how we will want OS users to be flashing? via web interface? |
| 04:22.36 | [g2] | Depends on where they come from |
| 04:22.58 | ByronT | if then else.... |
| 04:23.14 | [g2] | If they're running Unslung maybe via Redboot or maybe then can just replace the Linksys stock |
| 04:23.37 | [g2] | I flash from the Linksys loaded in Ram |
| 04:23.55 | kergoth | re |
| 04:23.57 | kergoth | so.. |
| 04:23.59 | kergoth | my electricity |
| 04:24.02 | kergoth | isnt fixed yet |
| 04:24.07 | [g2] | DOH! |
| 04:24.19 | [g2] | S-U-C-K |
| 04:24.22 | ByronT | if they've got unslung they should be flashing from web interface as well (maintenance mode) |
| 04:24.26 | kergoth | yeah. talk about boring. empty quiet apartment |
| 04:24.49 | [g2] | you should go home and be one with yourself |
| 04:25.02 | rwhitby-away | [g2]: my copy of leds_rs_green only has 1 executable line in it |
| 04:25.04 | kergoth | hmm, yeah, i shouldve bought beer |
| 04:25.31 | kergoth | so, i just got a piercing. first i've ever gotten. |
| 04:25.32 | kergoth | heh |
| 04:25.38 | [g2] | something to pick-up on the way home |
| 04:25.46 | [g2] | kergoth loves pain |
| 04:25.58 | rwhitby-away | [g2]: was kas11 ok with changing /dev/ledman to /dev/leds? (I agree with the change) |
| 04:26.35 | [g2] | kas11 only cares that is c 126 0 |
| 04:27.03 | [g2] | and that's only the code kas11 wrote |
| 04:29.56 | [g2] | rwhitby-away, did you add /dev/leds to the initscripts ? |
| 04:30.28 | rwhitby-away | doing that now |
| 04:31.07 | [g2] | I updated the code in the jffs2, but not in the repo |
| 04:31.35 | [g2] | So you get two messages when the program runs and the light stays red |
| 04:31.37 | kergoth | hm. the chick said to rinse with listerine after drinking or eating anything but water |
| 04:31.45 | kergoth | so.. how the fuck am i going to manage int he mornings without coffee? |
| 04:31.54 | kergoth | maybe i need listerine and coffee, and alternate |
| 04:32.07 | [g2] | tounge ? |
| 04:32.26 | kergoth | lip, like http://www.kscope4fun.com/Lip.htm that one |
| 04:36.11 | ByronT | that looks painful! |
| 04:36.22 | kergoth | wasnt bad |
| 04:36.28 | kergoth | the weight on the lip is gonna take a bit of getting used to |
| 04:36.56 | kergoth | heh |
| 04:37.47 | [g2] | so was the a spur of the moment decision or a planned thing |
| 04:37.57 | kergoth | i'd been thinking about it for a while |
| 04:38.12 | kergoth | just went up to the tattoo parlor to price out a tattoo i'm getting, and figured, what the hell |
| 04:39.06 | [g2] | Ah... what the hell, the lights are off, might was well get a whole punched in lip |
| 04:39.12 | [g2] | :) |
| 04:39.15 | kergoth | exactly! :D |
| 04:39.17 | kergoth | hehe |
| 04:39.19 | [g2] | roflmao |
| 04:39.51 | [g2] | it's been a rough week, the dude's from nslu2-linux *never* leave me alone .... |
| 04:39.58 | kergoth | hah |
| 04:40.06 | ByronT | who me? |
| 04:40.29 | ByronT | next time Gorx comes into -general, I'll send him your way.... |
| 04:40.40 | kergoth | oh thats just mean |
| 04:41.24 | ByronT | put it this way, I was going to tell him to go to openwrt to flash his wrt54gs in the hope that he would brick it |
| 04:41.36 | kergoth | haha |
| 04:42.04 | [g2] | ByronT, do you know I'm the pin-short guy |
| 04:42.09 | ByronT | what was it he said when we asked if he followed instructions in wiki? oh yeah that he "couldn't be bothered" |
| 04:42.59 | rwhitby-away | he actually said that he read them but couldn't be bothered getting into redboot to erase the sysconf, but yeah it wasn't the right thing to say :-) |
| 04:43.11 | kergoth | oh man |
| 04:43.15 | kergoth | be glad i wasnt in there |
| 04:44.51 | rwhitby-away | [g2]: about to check in /dev/leds and /dev/rfcomm0 in initscripts - ok? |
| 04:44.52 | ByronT | I'd been handing you a case of beer |
| 04:45.41 | [g2] | rwhitby-away sure go ahead |
| 04:45.54 | [g2] | did you just add two devices ? |
| 04:47.07 | rwhitby-away | I added /dev/leds and /dev/rfcomm[0:3] |
| 04:47.26 | CIA-11 | 03rwhitby 07 * r1.2884 10openembedded/packages/initscripts/initscripts-1.0/openslug/device_table.txt: Added /dev/leds and /dev/rfcomm[0:4] to openslug device_table.txt |
| 04:48.21 | CIA-11 | 03rwhitby 07 * r1.2885 10openembedded/packages/initscripts/initscripts_1.0.bb: Bumped PR for openslug changes |
| 04:48.24 | rwhitby-away | 3 or 4, not sure which :-) |
| 04:51.44 | [g2] | Ding! |
| 04:51.58 | rwhitby-away | Cookies are ready! |
| 04:52.17 | [g2] | That's ok you're gonna break that vase |
| 04:53.08 | ByronT | ok, I'll bite, "what vase?" |
| 04:53.12 | [g2] | Now, what's really gonna bake your noodles is would you have done it if I didn't say anything about it |
| 04:53.42 | [g2] | It's from the Matrix when Neo sees the Oracle for the first time |
| 04:54.01 | ByronT | nods |
| 04:54.58 | kergoth | is it sad that i can spot the couple spots of incorrect wording in that quote? |
| 04:55.11 | kergoth | i think hbo needs to stop running the 3 movies over and over, i think i've seen them like 12 times now |
| 04:57.09 | kergoth | hehe |
| 04:57.15 | [g2] | rm -rf tmp ; cd ../build .... |
| 04:57.17 | kergoth | hardcode TOPDIR in local.conf |
| 04:57.25 | kergoth | then it'll always build in build, regardless of where you are |
| 04:58.01 | [g2] | actually it's usuall just a minor annoyance... |
| 04:59.47 | [g2] | rwhitby-away, While you are in such a spunky mood. |
| 05:00.04 | [g2] | Do you have your heart set on dhcp for Beta ? |
| 05:01.22 | rwhitby-away | don't use it so don't care :-) |
| 05:01.35 | rwhitby-away | I do want resolv.conf and default route for static though |
| 05:03.28 | [g2] | besides some more testing, I think that and the power-down are the only issues |
| 05:05.04 | [g2] | rwhitby-away, works |
| 05:05.19 | rwhitby-away | [g2]: thx |
| 05:05.38 | [g2] | I'm sure you'll sleep better now |
| 05:06.40 | ByronT | so I gather I will need to edit for static ip - or will OS default to previous IP? |
| 05:07.02 | [g2] | uses the static IP in sysconf partition |
| 05:07.06 | rwhitby-away | OpenSlug will default to what you had set in Linksys or Unslung |
| 05:07.23 | [g2] | but doesn't currently setup the resolv.conf or default gateway |
| 05:07.45 | ByronT | notes for doco... :) |
| 05:07.55 | rwhitby-away | kergoth: if a .bb file has FOO = "blah", and I want "blah" to be different for OpenSlug, can I just say FOO_openslug = "blah blah" immediately after the FOO = "blah" line? |
| 05:08.05 | [g2] | no that's for rwhitby |
| 05:08.07 | rwhitby-away | (need to change, not just append) |
| 05:08.15 | kergoth | rwhitby-away: yep |
| 05:08.18 | kergoth | doesnt have to be after, either |
| 05:08.23 | kergoth | 'FOO_openslug' is a variable name itself |
| 05:08.24 | rwhitby-away | cool |
| 05:08.36 | kergoth | just at the end of the parse, it looks for instances of that and collapses FOO_openslug into FOO |
| 05:08.40 | kergoth | (overwriting the previous contents of FOO) |
| 05:09.29 | rwhitby-away | Permission to change bluez-utils-common.inc for openslug? |
| 05:09.37 | kergoth | okay, i'm horribly unphotogenic, but i just had to take pictures of the piercing. http://covenant.kergoth.com/chris4.jpg, http://covenant.kergoth.com/chris2.jpg |
| 05:09.46 | kergoth | rwhitby-away: what are you changing? |
| 05:10.03 | rwhitby-away | removing pcmcia-cs, and enabling dund by default |
| 05:10.16 | kergoth | k, go for it |
| 05:10.20 | [g2] | bash-2.05b$ md5sum byront.img |
| 05:10.20 | [g2] | 2a3a2043a801bdc62bdb88803a9ff8f2 byront.img |
| 05:10.42 | [g2] | I'm gonna bzip2 that. That should be the uncompressed md5sum |
| 05:10.54 | ByronT | kergoth, I don't think I would have posted those pics ;) |
| 05:11.10 | kergoth | heh, yeah |
| 05:11.31 | kergoth | i dont think one good photo of me has ever been taken, in my entire life. its uncanny. |
| 05:11.33 | ByronT | I'll save them somewheres.... |
| 05:11.40 | [g2] | Nice Doo |
| 05:12.17 | kergoth | heh. i change hairstyles every few months. get bored. |
| 05:13.19 | kergoth | anyway, i should do something productive |
| 05:13.39 | ByronT | kergoth, sorta like the photographs in "The Ring" |
| 05:13.42 | ByronT | ? |
| 05:14.25 | kergoth | heh, dont recall, havent seen that movie in a long time |
| 05:15.00 | rwhitby-away | kergoth: if I want to overwrite a script in the build area (bluetooth.default), I just list my copy (which is in the openslug subdir) in SRC_URI, and then what is the easiest way to get that file in after configure, but before the build? |
| 05:15.11 | kergoth | actually, pictures #1 and #3 of me there arent that horrendous. 2 and 4 just plain suck |
| 05:15.15 | kergoth | rwhitby-away: ? |
| 05:15.27 | kergoth | any file:// uri in SRC_URI is automatically unpacked into ${WORKDIR} |
| 05:15.30 | kergoth | dont have to do anything |
| 05:15.40 | kergoth | file://bluetooth.default |
| 05:15.57 | rwhitby-away | yeah, but I need to overwrite a file of the same name in someting in workdir/scripts/... |
| 05:16.04 | kergoth | ? |
| 05:16.10 | rwhitby-away | s/in someting// |
| 05:16.14 | kergoth | it uses bluetooth.default during compilation? |
| 05:16.24 | ByronT | [g2] try again please |
| 05:16.31 | rwhitby-away | ah - good point - I can just do it in the install |
| 05:16.34 | kergoth | right |
| 05:16.41 | rwhitby-away | do_install_append_openslug ? |
| 05:16.49 | kergoth | ? |
| 05:16.54 | kergoth | it doesnt have to be openslug specific. |
| 05:17.03 | kergoth | puta sane default bluetooth.default in the dir above openslug in filespath |
| 05:17.08 | kergoth | and just install and use that for everyone |
| 05:17.14 | rwhitby-away | ok, cool |
| 05:17.25 | kergoth | then anyone can easily put in a custom version for their machien or distro |
| 05:17.29 | kergoth | without screwing with the .bb file |
| 05:18.12 | rwhitby-away | is there a special variable for ${sysconfdir}/default ? |
| 05:18.13 | [g2] | ByronT, ready ? |
| 05:18.36 | ByronT | yeah |
| 05:19.06 | ByronT | I ugh... try one more time |
| 05:19.18 | kergoth | rwhitby-away: nope |
| 05:19.18 | ByronT | sometimes PnP is a pita |
| 05:19.40 | [g2] | do you need another offer ? |
| 05:19.45 | ByronT | yep |
| 05:20.25 | ByronT | ahhhh |
| 05:22.22 | [g2] | ByronT, That's TEST sw use at your own risk ! :) |
| 05:22.42 | ByronT | woohoo |
| 05:22.44 | [g2] | and check the m5ssum |
| 05:22.51 | [g2] | md5sum |
| 05:23.01 | ByronT | (how fast does Frankenslug arise from the dead?) |
| 05:27.47 | ByronT | md5sum checked |
| 05:30.58 | [g2] | Have you flashed ? |
| 05:31.14 | [g2] | What's on your HD ? |
| 05:31.18 | ByronT | nada |
| 05:31.23 | [g2] | virgin ? |
| 05:31.27 | ByronT | flashing just finished |
| 05:31.29 | ByronT | yep |
| 05:31.35 | [g2] | is it formatted ? |
| 05:31.39 | ByronT | yes |
| 05:31.43 | [g2] | ext3 ? |
| 05:31.58 | ByronT | formatted by linksys - but with nothing on it |
| 05:32.23 | [g2] | nothing on the data partition |
| 05:33.33 | ByronT | nothing as in not a single blessed thing... :) (also as in it can be re-formattted with no loss) |
| 05:33.58 | ByronT | okee... just got a beep and two green leds (Ready and Ethernet) |
| 05:34.09 | ByronT | hd still sitting to the side |
| 05:34.13 | [g2] | It was Red before |
| 05:34.17 | [g2] | the ReadyStatus ? |
| 05:34.20 | ByronT | right |
| 05:34.31 | [g2] | ssh -l root 192.168.1.77 |
| 05:34.36 | ByronT | after the beep after it said successful flash |
| 05:35.25 | ByronT | PuTTy asking about server's host key... :) |
| 05:35.40 | ByronT | root password? |
| 05:35.51 | [g2] | non |
| 05:35.53 | [g2] | none |
| 05:35.56 | [g2] | just return |
| 05:36.04 | ByronT | tada |
| 05:36.10 | ByronT | Frankenslug LIVES! |
| 05:37.05 | ByronT | holy smoke, it is FAST |
| 05:37.49 | [g2] | http://www.nslu2-linux.org/wiki/OpenSlug/OpenSlugTurnUp |
| 05:38.08 | ByronT | course, I've been living with dropbear on prodslug.... |
| 05:38.11 | ByronT | but WOW |
| 05:38.23 | [g2] | does it seems faster ? |
| 05:38.52 | ByronT | there's nothing about "seem" I can see that it is MUCH faster |
| 05:39.09 | [g2] | having not run Unslung for months I don't have any comparison |
| 05:39.18 | [g2] | also it's not running any apps |
| 05:39.45 | ByronT | only run nfs kernel, dropbear, cups, and mt-daapd on prodslug |
| 05:41.09 | ByronT | order of install should be flash, complete network, then hd access or flash, hd access, complete network? |
| 05:42.40 | [g2] | I'm not sure about what you mean by complete network |
| 05:42.52 | [g2] | and I'd call the hd access, hd boot |
| 05:45.10 | ByronT | "complete network" as in gateway, resolv.conf information |
| 05:45.34 | [g2] | that'll be fixed very soon |
| 05:45.50 | [g2] | and it depends on your network config and what you are doing |
| 05:46.10 | ByronT | static all the way (no sense depending on something that changes) |
| 05:46.29 | [g2] | I meant what one does in the general sense |
| 05:46.54 | ByronT | ah... (as in documentation) |
| 05:47.11 | [g2] | If any network completing would be done it would be after on the HD |
| 05:47.36 | [g2] | none on the jffs2 partition is suggested |
| 05:48.16 | ByronT | jffs2 boot as a failsafe then... |
| 05:48.42 | [g2] | right, just unplug the HD/flash stick and you straight back to the first boot |
| 05:48.47 | [g2] | 2nd boot actually |
| 05:49.25 | ByronT | 2nd boot? you mean that after OS flash, two boots before ready? |
| 05:50.01 | ByronT | but you only "see" one if you are watching LEDs? |
| 05:50.05 | [g2] | No, I mean on the first boot things like the dropbear key are computed and the module dependances are calculated |
| 05:51.12 | ByronT | ok... so flash, reboot, plug drive in and hd access |
| 05:51.16 | ByronT | then hd boot |
| 05:51.44 | [g2] | on the second boot that has already occured and so it boots 20 seconds quicker |
| 05:51.44 | [g2] | hotplug-ng is quite the hot little setup |
| 05:51.45 | [g2] | ByronT, do you have a usb2.0-to-net adapter ? |
| 05:51.53 | ka6sox-away | [g2], has anybody done nfsboot? |
| 05:52.09 | ByronT | [g2], I do not |
| 05:52.09 | [g2] | ka6sox-away, nfsboot isn't supported right now |
| 05:52.11 | ka6sox-away | er nfsroot |
| 05:52.17 | ka6sox-away | okay |
| 05:52.19 | ka6sox-away | :) |
| 05:52.31 | [g2] | well maybe it might be |
| 05:52.34 | [g2] | dyoung, ping |
| 05:53.10 | rwhitby-away | should be working |
| 05:54.02 | ByronT | for doco reasons, my questions are probably newbieish... |
| 05:54.22 | ByronT | does it matter which USB port for initial hd plugin? |
| 05:54.32 | [g2] | yeah that's what I figured :) |
| 05:54.42 | [g2] | don't think so |
| 05:54.53 | [g2] | you could try sdb |
| 05:54.57 | [g2] | port2 |
| 05:54.57 | ByronT | I might try later (for the heck of it) |
| 05:55.17 | rwhitby-away | port 1 would be best |
| 05:55.19 | [g2] | actually that might be an issue |
| 05:56.00 | rwhitby-away | standardise on /dev/sda |
| 05:56.50 | [g2] | I wonder how that works with device ordering |
| 05:57.04 | rwhitby-away | dunno |
| 05:57.09 | ka6sox-away | sda will be the first USB mass storage device independent of which port it is plugged into |
| 05:57.16 | [g2] | rwhitby-away, does nfsroot work ? |
| 05:57.30 | rwhitby-away | should be working - dyoung tested it |
| 05:57.38 | [g2] | cool. |
| 05:57.53 | rwhitby-away | ka6sox-away: agreed - let's document a single hard disk on port 1 for the moment |
| 05:58.08 | ByronT | that's easily done.. ;) |
| 05:58.14 | ka6sox-away | yes...agreed so it is consistent. |
| 05:58.16 | kergoth | we should writeup a howto on using udev to get persistant device naming for a given hard disk |
| 05:58.21 | kergoth | regardless of where or when its plugged in |
| 05:58.39 | [g2] | we could used label mounts |
| 05:58.49 | kergoth | ? |
| 05:58.58 | kergoth | that doesnt do what i just described |
| 05:58.59 | kergoth | heh |
| 05:59.07 | kergoth | not automatically anyway |
| 05:59.16 | [g2] | I know it was another alternative |
| 05:59.19 | ByronT | [g2] check pm |
| 05:59.38 | kergoth | actually |
| 05:59.43 | kergoth | i wonder if theres a sysfs attribute |
| 06:00.31 | kergoth | thatd let you know which port its ownon |
| 06:00.36 | kergoth | s/ownon/on/ |
| 06:00.38 | rwhitby-away | kergoth: we'd need to get udev working first :-) |
| 06:00.46 | kergoth | if there is, you could use udev to get naming based on port |
| 06:00.52 | [g2] | DOH! the drive is powered on |
| 06:00.53 | kergoth | rwhitby-away: udev works fine. fixing it is what, a 5 minutes job at most |
| 06:01.08 | rwhitby-away | if you know how, yes .... |
| 06:01.10 | kergoth | i use udev on numerous oe built distros |
| 06:01.15 | kergoth | including openomap and openzaurus |
| 06:01.28 | rwhitby-away | ok udev works, initscripts dont |
| 06:01.36 | kergoth | ? |
| 06:01.54 | kergoth | the udev startup script works fine too |
| 06:02.06 | kergoth | if you enabled devfs or something, that might interfere |
| 06:02.09 | rwhitby-away | our /dev in openslug has the contents of device_table.txt, not udev |
| 06:02.19 | kergoth | and whats the message from udev on boot? |
| 06:02.28 | kergoth | udev_root != /dev/? |
| 06:02.34 | kergoth | that bug was fixed a few days ago, afaik |
| 06:02.36 | rwhitby-away | dunno - I know nothing about udev |
| 06:02.45 | kergoth | you dont need to know about udev to read an error message. |
| 06:03.06 | ByronT | brb |
| 06:03.11 | rwhitby-away | there is no error message. we discussed this the other day |
| 06:03.25 | kergoth | no one discussed this with me. |
| 06:03.34 | kergoth | tell me the _exact_ messages from udev on boot |
| 06:03.38 | kergoth | or fix it yourself |
| 06:03.41 | rwhitby-away | the test for udev presence in the devices script is not detecting udev presence, and hence is falling through to run makedevs |
| 06:03.52 | kergoth | then why does it work for everyone else? |
| 06:04.00 | kergoth | including the board i just booted with an oe rootfs this afternoon |
| 06:04.14 | rwhitby-away | dunno - I didn't say it was broken for anyone else . |
| 06:04.18 | rwhitby-away | only openslug |
| 06:04.44 | rwhitby-away | "we'd need to get udev working first" - openslug |
| 06:04.53 | kergoth | "a 5 minute job at most" - me |
| 06:05.01 | kergoth | give me information and i'll fix it |
| 06:05.06 | kergoth | until then, [g2] can try |
| 06:05.14 | rwhitby-away | "the test for udev presence in the devices script is not detecting udev presence, and hence is falling through to run makedevs" |
| 06:05.19 | [g2] | great idea! |
| 06:05.20 | rwhitby-away | no error message |
| 06:05.35 | kergoth | rwhitby-away: so which openslug specific change is fucking things up? |
| 06:05.49 | rwhitby-away | dunno |
| 06:06.22 | [g2] | rwhitby-away, just knows it's not functioning as designed and wants to fix it |
| 06:06.37 | [g2] | s/wants to fix it/wants it fixed/ |
| 06:06.54 | kergoth | and i know its a trivial enough bug that its not even worth specifically mentioning |
| 06:07.56 | rwhitby-away | huh - this is #nslu2-linux, not #oe - this is the right place to mention it |
| 06:08.49 | kergoth | where did i say i gave a shit about _where_ it was mentioned? |
| 06:08.52 | kergoth | funny, i dont recall saying that. |
| 06:09.49 | kergoth | there, pushing. |
| 06:09.52 | kergoth | i overestimated. it was 2 minutes |
| 06:10.25 | ByronT | they're really good |
| 06:10.25 | kergoth | 01:10 < CIA-8> kergoth * r1.3126 openembedded/packages/initscripts/ (initscripts-1.0/devices |
| 06:10.28 | kergoth | <PROTECTED> |
| 06:10.32 | kergoth | i'll have to try that |
| 06:10.47 | kergoth | i'm out of scotch :( |
| 06:10.54 | rwhitby-away | kergoth: thx |
| 06:11.05 | ByronT | actually, as a beer drinker, I |
| 06:11.12 | kergoth | np. please confirm so we can get to writing those udev niftiness howtos |
| 06:11.17 | ByronT | I'm surprised how good this really is |
| 06:11.50 | ByronT | [g2], the (cd.... ) instructions for testing the mount success? |
| 06:11.51 | kergoth | i've never been much of a beer guy, but then i realized it was due to only ever having drank beers that arent dark |
| 06:11.54 | kergoth | heh |
| 06:12.12 | [g2] | ByronT, you don't need the ()s |
| 06:12.48 | [g2] | It was just that I cut-and-pasted most of it from Dyoung's page |
| 06:13.02 | ByronT | from the label "Brewed with generous portions of Caramel, Munich and Chocolate malt, this heavy porter..." |
| 06:13.24 | peteru-home | kergoth would probably like Belgian Beers |
| 06:13.43 | ByronT | [g2], I know the "( )" aren't needed... just asking if it is to ascertain the success of the mount |
| 06:13.54 | peteru-home | speaking of beer - I'm off to sterilise my fermenter... ;) |
| 06:13.57 | [g2] | ByronT, it's removed from the wiki |
| 06:14.17 | ByronT | [g2] cheater!!! |
| 06:14.21 | ByronT | :) |
| 06:17.20 | [g2] | OK GOOD NEWS |
| 06:17.59 | dyoung | I keep seeing my name.... |
| 06:18.15 | ByronT | keep your eyes covered? |
| 06:18.20 | [g2] | For what ever reason (I don't know for sure) but disk1 is sda and disk2 is sdb, switching flash stick and hd follows the port on the two boots I did |
| 06:19.47 | [g2] | there's a minor issue on shutdown |
| 06:19.55 | rwhitby-away | kergoth: can't confirm right now, in the middle of testing my bluez changes |
| 06:20.00 | rwhitby-away | but will confirm later |
| 06:20.09 | [g2] | that it thinks some drives are there on sdd |
| 06:20.30 | ByronT | [g2], was that for me? |
| 06:20.38 | [g2] | ByronT, now |
| 06:20.39 | [g2] | no |
| 06:20.55 | [g2] | that's the sda sdb support issue |
| 06:21.02 | [g2] | we *may* be totally fine |
| 06:21.20 | kergoth | rwhitby-away: k, cool. let me know |
| 06:21.45 | [g2] | kergoth -- really thanks for all your help today (and in general) |
| 06:21.50 | ByronT | you got "# vi /mnt/card/etc/fstab and...." meaning? |
| 06:22.14 | kergoth | 01:22 < CIA-8> kergoth * r1.3127 openembedded/packages/udev/ (udev_054.bb udev-054/flags.patch): Add udev 054. |
| 06:22.31 | ByronT | I'll put kergoth on my Christmas list and send him the Sam Adams Holiday sampler case |
| 06:22.34 | [g2] | rwhitby-away, thanks for all your help today and in general too |
| 06:22.58 | kergoth | ByronT: hehe. half the time i meet people i know online, either i'm buying them beer, or they're buying me beer. its the open source way. |
| 06:23.12 | [g2] | free as in beer |
| 06:23.17 | kergoth | :) |
| 06:23.22 | ByronT | my thoughts exactly! |
| 06:23.36 | kergoth | OLS is one big drinking frenzy |
| 06:23.37 | [g2] | Ok interesting |
| 06:23.44 | kergoth | with occasional presentations to sleep through |
| 06:24.22 | [g2] | If 2 devices are present, initial testing seems to be that they map sda to port1 and sdb to port2 |
| 06:25.22 | [g2] | ByronT, That means what it says.... If you are going to use a swap partition, the fstab entry should be added |
| 06:25.31 | dyoung | okay I'm gonna guess that people were pinging me to ask about openslug nfsroot. |
| 06:25.38 | ka6sox-away | if you plug it in the other way it should be the other way. |
| 06:25.42 | [g2] | I didn't ping you |
| 06:25.55 | rwhitby-away | kergoth: where do we add /dev entries with udev (e.g. /dev/leds for the nslu2_io led manager module) ? |
| 06:25.55 | [g2] | I applauded you |
| 06:25.57 | ByronT | dyoung, or we just wanted you to grace us with your presence |
| 06:26.01 | [g2] | rwhitby-away, said it worked |
| 06:26.12 | kergoth | rwhitby-away: you dont. |
| 06:26.17 | kergoth | rwhitby-away: they appear automatically. |
| 06:26.28 | dyoung | it doesnt yet. Or it might... either way I hanvnt tested that yet. The last time I tested it I need more modules in the openslugrootfs. |
| 06:26.30 | kergoth | its all dynamic |
| 06:26.32 | kergoth | driven by hotoplug |
| 06:26.34 | kergoth | hotplug |
| 06:27.15 | rwhitby-away | is there special stuff which nslu2_io.c has to do (i.e. how does udev know to call it /dev/leds and not something else) |
| 06:27.19 | [g2] | so for BT devices and IO devices the will be no hotplug support because hotplug-ng currently doesn't support them |
| 06:27.33 | ka6sox-away | [21:52] <[g2]>dyoung, ping |
| 06:27.33 | kergoth | rwhitby-away: you can name the devices whatever you want |
| 06:27.36 | kergoth | rwhitby-away: via udev rules |
| 06:27.43 | kergoth | rwhitby-away: by default, it uses the kernel's name for it |
| 06:27.54 | kergoth | rwhitby-away: which is set by the driver. |
| 06:28.01 | kergoth | any character device or block device driver will "just work" |
| 06:28.04 | kergoth | as will just about any others |
| 06:28.14 | kergoth | as long as you fill in your structures the way you should |
| 06:28.40 | rwhitby-away | right - that's what I'm after - what nslu2-io.c has to do (cause it doesn't mention a name at the moment) |
| 06:28.55 | dyoung | ... OLS.... Obscene Liquor Scene? |
| 06:28.58 | kergoth | theres nothing udev specific about this |
| 06:29.02 | ByronT | since we are shooting for OS Beta for the 99% daytrippers, should the add a swap partition be in install doco, or should it be a wiki doco? |
| 06:29.09 | kergoth | if it isnt setting things up right, its horribly broken for devfs as well |
| 06:29.20 | kergoth | and i'd be surprised if the kernel didnt crash & burn, really |
| 06:29.25 | kergoth | dyoung: ottawa linux symposium |
| 06:30.25 | [g2] | ByronT, for now it's on the wiki |
| 06:30.40 | [g2] | it's pretty tiny and needs to be aired out a little |
| 06:30.45 | rwhitby-away | ok, I'll stop now cause I'm not making myself clear |
| 06:31.05 | [g2] | I think I did that the other night |
| 06:31.06 | ByronT | rwhitby-away, need a beer? |
| 06:31.07 | rwhitby-away | [g2]: /dev/leds will probably disappear now, and we will need to work out how to get it back again |
| 06:31.16 | kergoth | rwhitby-away: to answer your question, if the driver isnt doing what it should, its badly broken, udev or no. |
| 06:31.22 | kergoth | heh |
| 06:31.24 | kergoth | its that simple |
| 06:32.44 | ByronT | okee... just did the shutdown -r now |
| 06:32.44 | kergoth | rwhitby-away: you were incorrect. |
| 06:32.47 | kergoth | rwhitby-away: it does in fact specify names. |
| 06:32.53 | kergoth | »·······if (register_chrdev(N2LM_MAJOR, "n2_ledm", &n2lm_fops) < NOERR) { |
| 06:33.00 | kergoth | watch for /dev/n2_ledm |
| 06:33.35 | dyoung | Ottawa Liquor Symposium. ;-) |
| 06:33.42 | kergoth | dyoung: thats about right, yep :) |
| 06:33.48 | ByronT | does OS beep after successful start? or just got to green ready/status? |
| 06:33.54 | ByronT | s/got/go |
| 06:34.08 | [g2] | green |
| 06:34.14 | [g2] | beep is when the driver is loaded |
| 06:34.15 | *** join/#nslu2-linux bob_tm_nl (~chatzilla@82.171.35.169) |
| 06:34.36 | ka6sox-away | kergoth: jacques showed me a picture from OLS with everyone at a BOFH... |
| 06:34.44 | [g2] | rwhitby-away, ls -l /dev/n2_ledm |
| 06:34.44 | ByronT | [g2], what do you mean "driver is loaded"? |
| 06:35.10 | [g2] | ByronT, the GPIO OpenN2 driver |
| 06:35.23 | [g2] | the one that kergoth was quoting code from |
| 06:35.59 | kergoth | ka6sox-away: heh. http://rikers.org/gallery/ols2004/20040724b .. i'm third from the left, jacques is third from the right |
| 06:36.07 | kergoth | anyone else in here going to ols? |
| 06:36.39 | ka6sox-away | kergoth: yeah..thats the one he showed me... |
| 06:36.50 | kergoth | i love the picture of keith packard |
| 06:37.07 | kergoth | http://rikers.org/gallery/ols2004/keith |
| 06:37.16 | kergoth | (he'd had a fair bit of whiskey at that point) |
| 06:37.29 | ByronT | hehe |
| 06:37.47 | ByronT | but I bet he found an AP |
| 06:37.53 | kergoth | he did, worked well he said |
| 06:37.55 | kergoth | hehe |
| 06:38.05 | [g2] | ByronT, |
| 06:38.12 | [g2] | did you reboot to the HD ? |
| 06:38.39 | ByronT | oh yeah... was saving PuTTy session when the packard pic came up |
| 06:39.06 | ByronT | FrankenSlug is still alive |
| 06:39.08 | kergoth | rwhitby-away: we should probably link to http://www.reactivated.net/udevrules.php |
| 06:39.29 | kergoth | rwhitby-away: the basics of writing udev rules, with examples |
| 06:40.20 | [g2] | kergoth, thx for the link |
| 06:40.23 | kergoth | np |
| 06:40.41 | ByronT | [g2] what next? |
| 06:40.56 | [g2] | rwhitby-away, what ever happend with the ls -l /dev/n2_ledm |
| 06:41.02 | kergoth | i like my rules for the individual slots in my 5-in-one reader |
| 06:41.03 | kergoth | BUS="scsi", SYSFS{vendor}="Lexar ", SYSFS{model}="Media Inc. CF ", KERNEL="sd?1", NAME="%k", SYMLINK="cf" |
| 06:41.06 | kergoth | BUS="scsi", SYSFS{vendor}="Lexar ", SYSFS{model}="Media Inc. SM/xD", KERNEL="sd?1", NAME="%k", SYMLINK="sm" |
| 06:41.09 | kergoth | BUS="scsi", SYSFS{vendor}="Lexar ", SYSFS{model}="Media Inc. SD/MS", KERNEL="sd?1", NAME="%k", SYMLINK="sd" |
| 06:41.13 | kergoth | :) |
| 06:42.09 | [g2] | right so we could create symlinks like hda or hdb |
| 06:42.44 | kergoth | with the rules on model and serial and stuff, you could easily create a link for a specific hard disk, regardless of where, or possibly go by location as well |
| 06:43.09 | kergoth | i like that udev can rename network interfaces too :) |
| 06:43.11 | kergoth | which is just cool |
| 06:43.43 | [g2] | ByronT, that's where we are at right now |
| 06:43.54 | [g2] | You probably need go get bb running |
| 06:44.09 | [g2] | then you could bb samba and then just ipkg install it |
| 06:44.26 | [g2] | whatever apps your interested in |
| 06:46.22 | ByronT | I was thinking "complete network access"... prep for packages, etc... |
| 06:46.46 | ByronT | and shouldn |
| 06:47.07 | ByronT | dang "enter" key is too close to ' (after drinking a few beers) |
| 06:47.10 | [g2] | ByronT, will complete can be added by hand now, but will be added automatically soon |
| 06:47.40 | [g2] | depending on how the network is setup and where the packages reside that may be it |
| 06:47.41 | ByronT | shouln't umount /initrd be done automatically? |
| 06:47.50 | [g2] | ipkg update |
| 06:47.52 | [g2] | ipkg install |
| 06:48.47 | ByronT | newbie question warning now: with hd attached, / = hd partition? |
| 06:50.46 | [g2] | ByronT, df |
| 06:51.02 | rwhitby-away | ByronT: we will umount /initrd eventually, but are leaving it there during alpha/early beta |
| 06:51.53 | ByronT | [g2] /dev/sda1 ~30gb |
| 06:51.54 | [g2] | rwhitby-away, ByronT went through http://www.nslu2-linux.org/wiki/OpenSlug/OpenSlugTurnUp |
| 06:52.38 | rwhitby-away | [g2]: should we create /media/hdd and use that in the doco? |
| 06:53.13 | ByronT | 'night kergoth! |
| 06:53.28 | [g2] | Nite |
| 06:53.38 | ByronT | don't get your lip piercing thingy caught on anything in your sleep! |
| 06:53.51 | [g2] | really |
| 06:53.54 | kergoth`zzz | gah, now you're gonna make me all paranoid. |
| 06:54.06 | ByronT | ;) |
| 06:54.49 | ByronT | I just had this image of the pillow cover all smushed up and attached to a lip... |
| 06:55.34 | dyoung | I created /media/hdd on my test image. |
| 06:55.41 | dyoung | since thats what we were talking about earlier... |
| 06:56.04 | [g2] | I think that's the name we had talked about the other day |
| 06:56.06 | dyoung | stuff all my test ipks in there and mkdir tunes. |
| 06:56.08 | rwhitby-away | yeah, where do we put that in OE to get it into the firmware? |
| 06:56.20 | [g2] | dunno |
| 06:56.37 | dyoung | can hack it in same place we hacked in initrd. |
| 06:56.41 | [g2] | I've learn a lot in the last week, but there's still much more to learn :) |
| 06:56.45 | dyoung | (yes, I know its hack) |
| 06:58.20 | ByronT | FrankenSlug seems to be happy |
| 06:58.33 | [g2] | ByronT, the /mnt/card will probably change |
| 06:58.38 | dyoung | so are you a happy camper now? |
| 06:58.53 | ByronT | "day tripper" for the moment |
| 06:58.59 | ByronT | :) |
| 07:00.01 | ByronT | NQW: where do I put resolv.conf changes for permanence? |
| 07:00.25 | rwhitby-away | ByronT: we will do that in sysconfsetup I think |
| 07:01.43 | rwhitby-away | dyoung: base-files.bb |
| 07:02.00 | rwhitby-away | we should just add it there - no need to conditionalise it |
| 07:02.03 | dyoung | I just found that like 3 seconds ago too |
| 07:02.05 | ByronT | for the time being, remove the symlink to /var/run/resolv.conf and place my own in /etc? |
| 07:02.30 | dyoung | so do we make openslug-base-files and include base-files and add stuff? |
| 07:02.44 | rwhitby-away | no |
| 07:03.17 | dyoung | ok |
| 07:03.27 | dyoung | My brain isnt completely wrapped around that bit yet. |
| 07:03.55 | [g2] | the var/run/resolv.conf ? |
| 07:04.21 | dyoung | /media/foo |
| 07:04.26 | ByronT | ls -al in .etc shows resolv.conf -> /var/run/resolv.conf |
| 07:04.50 | dyoung | oh yuou werent talking to me. |
| 07:04.53 | CIA-11 | 03rwhitby 07 * r1.2886 10openembedded/packages/ (4 files in 3 dirs): Added /media/hdd to base-files (as per discussion with kergoth) |
| 07:05.21 | ByronT | which, of course is not existent... and leaves network in limbo |
| 07:05.24 | [g2] | ByronT, We'll have to look at the init scipts for networking |
| 07:07.41 | dyoung | /dev/input/mice ? |
| 07:07.41 | CIA-11 | 03rwhitby 07 * r1.2888 10openembedded/packages/bluez-utils/ (3 files): Added bluetooth.default to bluez files, so that distros can start up different daemons by default. |
| 07:07.56 | ByronT | ssssweeet. FrankenSlug is talking to outside world |
| 07:08.09 | ByronT | ipkg |
| 07:08.13 | ByronT | whoops |
| 07:08.45 | [g2] | ByronT, don't install any UNSLUNG packages |
| 07:09.05 | [g2] | they are based on the old tool chains |
| 07:09.07 | ByronT | just checking what is *here* |
| 07:09.24 | ByronT | not installing... just looking/playing |
| 07:09.27 | [g2] | where is *here* |
| 07:09.36 | [g2] | /etc/ipkg.conf |
| 07:10.45 | dyoung | "... makes for fun reading" ?? |
| 07:10.54 | dyoung | its not that ugly is it? |
| 07:11.25 | ByronT | someone making fun of dyoung doco again? |
| 07:11.56 | ByronT | if it makes you feel anybetter, I umounted before "reading" |
| 07:13.44 | ByronT | okee.. it's late, the beers are taking effect (good) and time for bed.... |
| 07:14.21 | ka6sox-away | nite ByronT |
| 07:14.30 | ka6sox-away | good work tonight. |
| 07:14.37 | [g2] | ByronT, thx |
| 07:14.41 | ByronT | I can add my name to opensluggers, right? |
| 07:14.49 | dyoung | yeah, youre openslugged. |
| 07:14.58 | dyoung | or youre the first beta tester. |
| 07:15.14 | ka6sox-away | Beta #1....woohoo! |
| 07:15.14 | *** join/#nslu2-linux rwhitby-away (~rwhitby@rwhitby.nslu2-linux) |
| 07:16.08 | ByronT | #18 added to table |
| 07:17.53 | ByronT | notes put to the side... doco framework started... |
| 07:18.02 | ByronT | good night all |
| 07:18.08 | ka6sox-away | nite! |
| 07:20.04 | dyoung | So Enthusiastic.... |
| 07:20.31 | ByronT-zzZZZzz | I'll give you my big smile (vVVVVv) |
| 07:20.42 | rwhitby-away | ByronT is a real asset to this community! |
| 07:20.49 | ByronT-zzZZZzz | -et |
| 07:21.01 | rwhitby-away | :-) |
| 07:22.31 | [g2] | rwhitby-away, /dev/n2_ledm isn't there |
| 07:22.45 | [g2] | but there is a /dev/leds |
| 07:25.00 | [g2] | I'm sure we'll get to the bottom of it |
| 07:25.29 | [g2] | I've wanted to learn about udev and I"m much more knowledgable than a week ago |
| 07:25.42 | [g2] | but still lots to learr |
| 07:25.44 | [g2] | learn |
| 07:27.05 | [g2] | maybe change is in the oe-devel repo |
| 07:28.18 | [g2] | nothing to pull |
| 07:28.28 | dyoung | He is an asset. It takes a special kind of person to write good techincal documententation that the layperson can use. |
| 07:29.18 | rwhitby-away | Anyway, OpenSlug's /dev/leds is not affected, and kergoth fixed the initscripts bug (which was not an openslug-specific thing at all) for the other OE distros, so all is well with the world. |
| 07:45.37 | kergoth`zzz | woo! |
| 07:46.20 | kergoth`zzz | [g2]: udevd is running, right? |
| 07:46.23 | dyoung | Electricity is your friend. |
| 07:46.28 | kergoth`zzz | indeed. |
| 07:46.40 | [g2] | kergoth`zzz, checking |
| 07:47.16 | [g2] | Something's happening that the n2_ledm either isn't getting create or /dev is being mapped over |
| 07:47.35 | kergoth | does /etc/.udevdb exist? its a directory |
| 07:47.35 | [g2] | it's a problem for later today |
| 07:47.37 | kergoth | is udevd running? |
| 07:47.48 | kergoth | er, /dev, not /etc |
| 07:47.53 | kergoth | heh |
| 07:48.40 | [g2] | heh... there is no udevd |
| 07:49.00 | kergoth | well, iirc udevd starts when you get the first hotplug event |
| 07:49.12 | kergoth | check for the db |
| 07:49.28 | kergoth | thatl do too |
| 07:49.32 | kergoth | er, s/l/ll/ |
| 07:50.11 | [g2] | nope |
| 07:50.36 | [g2] | root@nslu2:/# find / -name "udevd" |
| 07:50.36 | [g2] | root@nslu2:/# |
| 07:50.43 | kergoth | ? |
| 07:50.46 | [g2] | heh.. it's late |
| 07:50.51 | kergoth | heh |
| 07:50.54 | kergoth | installing udev helps :) |
| 07:51.07 | [g2] | note to self |
| 07:51.08 | [g2] | ... |
| 07:51.34 | [g2] | very carefully |
| 07:51.41 | kergoth | indeed. |
| 07:51.49 | [g2] | cheers |
| 07:52.26 | [g2] | nite all |
| 07:52.30 | kergoth | night |
| 08:17.08 | *** join/#nslu2-linux rwhitby-away (~rwhitby@rwhitby.nslu2-linux) |
| 09:17.38 | rwhitby-away | hmm - we may have a problem |
| 09:18.26 | rwhitby-away | when I boot openslug with the usb BlueTooth dongle attached, it does not insmod the module automatically. |
| 09:19.26 | rwhitby-away | if (after openslug is up and running) I unplug and then reinsert the dongle, then it is detected and the module is insmodded and everything is fine |
| 09:20.36 | rwhitby-away | one key point is that the message from ohci_hcd comes before switchbox pivots to the real rootfs, so any hotplug stuff would not be available at that point. |
| 09:34.00 | dyoung | is there a way to force rescan? |
| 09:34.16 | rwhitby-away | dunno - reading up on hotplug ... |
| 09:34.24 | dyoung | ie: is it possible to trigger it without a hotplug event... |
| 09:34.30 | dyoung | I hate windows. |
| 10:01.02 | rwhitby-away | so I guess usb disks are ok cause we have all the bits compiled into the kernel already. |
| 10:01.21 | rwhitby-away | can we test on something else? does a usb serial cable which requires a module also not get recognised? |
| 10:03.49 | dyoung | I du nno, do you want me to? |
| 10:04.14 | siddy-away | I guess the whole usb-subsystem comes up before hotplug is available, so you'll need coldplug-functionality in hotplug-ng. But... iirc that is on the todo-list. |
| 10:04.20 | dyoung | I'll need to pull/build the latest; I'm not current on openslug firmware atm. |
| 10:05.02 | rwhitby-away | so apart from having to replug the dongle, everything else now for BluetTooth is ready for openslug usage. The only thing I had do to from a virgin openslug system is to install a number of ipks, and modify /etc/ppp/options |
| 10:06.08 | siddy-away | rwhitby-away: just manually load the modules at startup and don't rely on the hotplug-stuff! ;) |
| 10:21.51 | rwhitby-away | that's the last resort, yes |
| 10:25.43 | rwhitby-away | is anyone working on resolve.conf and route default gw ? |
| 10:41.31 | rwhitby-away | You know we should put sysconfsetup in /sbin/unconfigured.sh ... |
| 10:43.59 | rwhitby-away | We can also put stuff in /etc/rc.boot/.... and /sbin/setup.sh ... |
| 10:44.31 | rwhitby-away | (this is all from looking at /etc/init.d/rcS) |
| 11:01.37 | *** join/#nslu2-linux rwhitby-away (~rwhitby@rwhitby.nslu2-linux) |
| 11:06.27 | *** join/#nslu2-linux caplink811 (~Joerg@dsl-213-023-128-158.arcor-ip.net) |
| 11:18.41 | rwhitby-away | dyoung: I'm adding gateway to sysconfsetup ... |
| 11:31.07 | CIA-11 | 03rwhitby 07 * r1.2889 10openembedded/packages/openslug-init/openslug-init-0.10/sysconfsetup: Added gateway definition to OpenSlug sysconfsetup. |
| 11:31.57 | rwhitby-away | now for dns server ... |
| 11:38.39 | CIA-11 | 03rwhitby 07 * r1.2890 10openembedded/packages/base-files/base-files_3.0.14.bb: Set the openslug hostname |
| 11:58.31 | CIA-11 | 03rwhitby 07 * r1.2891 10openembedded/packages/openslug-init/ (openslug-init-0.10/sysconfsetup openslug-init_0.10.bb): Added hostname and dns server support to openslug sysconfsetup |
| 11:59.02 | rwhitby-away | dhcp should be a piece of cake now (I've left commented code in sysconfsetup for the heavy lifting) |
| 12:05.06 | rwhitby-away | default hostname is now set to "openslug" instead of "nslu2", and is overriden by the name that you set in the Linksys web interface |
| 12:07.44 | rwhitby-away | devslug login: root |
| 12:07.44 | rwhitby-away | root@devslug:~# ping www.nslu2-linux.org |
| 12:07.44 | rwhitby-away | PING www.nslu2-linux.org (66.159.209.60): 56 data bytes |
| 12:07.44 | rwhitby-away | 64 bytes from 66.159.209.60: icmp_seq=0 ttl=48 time=252.0 ms |
| 12:07.53 | rwhitby-away | That's immediately after first boot. |
| 12:12.49 | rwhitby-away | now I just need to set ip_forward somewhere .... |
| 12:13.15 | dyoung | wow,youve been busy. |
| 12:13.57 | dyoung | Lotta stuff going into opensluginit |
| 12:20.02 | *** join/#nslu2-linux rwhitby-treo (~upirc@rwhitby.nslu2-linux) |
| 12:20.35 | rwhitby-treo | ip_forward does the trick ... |
| 12:20.48 | *** part/#nslu2-linux rwhitby-treo (~upirc@rwhitby.nslu2-linux) |
| 12:25.49 | rwhitby-away | it's in /etc/sysctl.conf in Debian ... |
| 12:26.34 | *** join/#nslu2-linux [cc]smart (~smart@gw.ptr-62-65-149-158.customer.ch.netstream.com) |
| 12:29.55 | dyoung | I cant build anything tonight. Rearranging disks... |
| 12:30.00 | dyoung | Totally out of space. |
| 12:30.17 | rwhitby-away | use nudi ... |
| 12:31.16 | dyoung | thats true. |
| 12:31.24 | dyoung | I should remember about that.... |
| 12:37.58 | rwhitby-away | ktune - I should remember about that! |
| 13:04.24 | *** join/#nslu2-linux bob_tm_nl (~chatzilla@82.171.35.169) |
| 13:08.21 | rwhitby-away | hey bob_tm_nl |
| 13:08.33 | bob_tm_nl | Hey rwhitby-away |
| 13:09.44 | bob_tm_nl | Open wirelessnetworks are really nice. |
| 13:10.31 | rwhitby-away | cool. Seen any logs, or do you need a status update? |
| 13:10.59 | bob_tm_nl | Status update would be good. |
| 13:11.17 | rwhitby | openslug is pretty much ready for beta release |
| 13:11.27 | bob_tm_nl | That I saw - great news! |
| 13:11.36 | rwhitby | jp30 is doing a great job on Unslung packages |
| 13:11.55 | bob_tm_nl | Yes - he's also doing a good job on the list. |
| 13:12.03 | rwhitby | I have a BlueSlug |
| 13:12.09 | bob_tm_nl | Que? |
| 13:12.35 | bob_tm_nl | I'm from Barcelona. What's a BlueSlug |
| 13:12.44 | rwhitby | A slug providing an internet connection to client devices via bluetooth. The client in this case is a Treo 650 |
| 13:13.20 | bob_tm_nl | Ah - I believe I've seen rwhitby-trio or something. |
| 13:13.57 | bob_tm_nl | How's the alpha doing? Success-stories/disasters? |
| 13:14.23 | rwhitby | That's usually via GPRS, but I bought a USB bluetooth dongle, and inside my house it goes via bluetooth (no GPRS charges) |
| 13:14.48 | rwhitby | ByronT got OpenSlug up and going in about ten minutes, and is going to write the user doco for it. |
| 13:15.15 | bob_tm_nl | It is much cheeper that way. I don't have much BT equipment (my Palm is a 505, so no BT there) |
| 13:15.35 | rwhitby | dyoung added mt-daapd to OE so it can be used with OpenSlug ... |
| 13:15.39 | bob_tm_nl | ~praise ByronT |
| 13:15.41 | jbot | All hail ByronT! |
| 13:16.33 | bob_tm_nl | How's the Openslug/Unslung package compatibility? |
| 13:17.43 | rwhitby | we're only migrating data. migration of apps involves adding the app to OE and not being constrained by Linksys compatibility. OE apps install in the usual places for Linux (i.e. not under /opt). |
| 13:18.55 | bob_tm_nl | I understand - just thought it would be good if we could do both at once. |
| 13:19.59 | bob_tm_nl | One thing: The IPKG number is currently both in the make file and the control file. Are both needed or could one be generated from the other |
| 13:20.20 | rwhitby | jp30 is already pioneering the control file being built in the makefile |
| 13:20.36 | bob_tm_nl | Sounds good |
| 13:20.42 | rwhitby | I expect he will update the template.mk for that soon - all of his packages do it |
| 13:22.01 | bob_tm_nl | And Unslung 4? |
| 13:22.34 | rwhitby | switchbox work for openslug has been validated for unslung, so that's still in sync |
| 13:22.49 | rwhitby | unslung 4.x is in alpha ... |
| 13:23.18 | bob_tm_nl | Yes - how's the feedback - most people getting it to run? |
| 13:23.33 | bob_tm_nl | of the dozen or so alpha testers? |
| 13:23.57 | rwhitby | quite a few of them have been focused on openslug for the last week in an effort to get that beta out |
| 13:24.31 | rwhitby | we need some people who want the external disk rootfs back to be testing unslung 4.x |
| 13:26.24 | bob_tm_nl | What's the intended audience for that feature? |
| 13:27.34 | rwhitby | People who are afraid of internal flash writes .... or an easy recovery (unplug the disk and start again). |
| 13:27.51 | rwhitby | .. or want an easy recovery .. |
| 13:29.47 | bob_tm_nl | Yes, ok. It will still maintain the normal Unslung disk layout ? |
| 13:30.23 | rwhitby | yes - just like Unslung 2.x |
| 13:31.22 | bob_tm_nl | It is a testing problem with features not appealing to power users. |
| 13:31.38 | rwhitby | yep |
| 13:31.59 | bob_tm_nl | Have we any idea of the performance penalty? |
| 13:32.07 | rwhitby | nfsroot is the feature which would be appealing to power users |
| 13:40.21 | *** join/#nslu2-linux [g2] (~g2@g2.nslu2-linux) |
| 13:41.05 | [g2] | rwhitby, still going .... you're on a roll man! |
| 13:41.56 | rwhitby | network connectivity should be up in the latest openslug |
| 13:42.11 | rwhitby | dhcp should be easy to add now |
| 13:42.43 | [g2] | You mean the gateway and namesever changes |
| 13:42.49 | rwhitby | yeah |
| 13:42.54 | rwhitby | trying to work out how to delay hotplug until after we've loaded the real rootfs |
| 13:42.54 | [g2] | Great! |
| 13:43.44 | rwhitby | cause at the moment, any hardware which is plugged in, but whose module is not compiled into the kernel, will not have it's module loaded automatically at boot |
| 13:44.05 | rwhitby | ... plugged in at boot time that is .. |
| 13:45.13 | [g2] | BT ? |
| 13:45.21 | rwhitby | ye[ |
| 13:45.23 | rwhitby | yep |
| 13:45.31 | [g2] | that's because it's a net driver |
| 13:45.49 | rwhitby | if you unplug and plug after openslug is booted, it works fine |
| 13:45.52 | [g2] | and hotplug doesn't have net implemented fully |
| 13:46.11 | rwhitby | I believe it's becuase of switchbox |
| 13:46.51 | rwhitby | the hotplug events are probably happening before we pivot, and hence /sbin/hotplug is not there ... |
| 13:46.51 | [g2] | that's an easy theory to test |
| 13:47.26 | rwhitby | even a usb-serial cable would have the same problem I think |
| 13:47.30 | [g2] | change the kernel cmdline to root=/dev/mtdblock4 .... |
| 13:48.45 | [g2] | Do you want BT as your primary interface or a secondary one ? |
| 13:49.55 | rwhitby | secondary - it's providing an access point for other devices |
| 13:50.46 | [g2] | you know we support the modprobe.conf now right ? |
| 13:50.50 | rwhitby | I'm also wondering (without having enough knowledge to know for sure) whether hotplug-ng perhaps doesn't do the coldplug things that normal hotplug does. |
| 13:51.32 | [g2] | I think you can just add it to /etc/modprobe.conf and update-modules |
| 13:51.33 | rwhitby | yeah, but I don't know how that helps me |
| 13:51.54 | [g2] | then it loads the BT modules |
| 13:52.05 | [g2] | and they'll kick everything |
| 13:53.57 | [g2] | All the BT stuff is kernel, but the bluez-utils isn't in by default correct ? |
| 13:54.01 | rwhitby | yeah, but that requires user intervention to modify that file. this stuff should all work automatically from the ipkg install |
| 13:54.23 | rwhitby | it's all modules, or stuff you put in your local.conf |
| 13:54.52 | rwhitby | didn't want to bloat openslug for non-BT people |
| 13:55.35 | [g2] | I think BT will be quite popular |
| 13:56.37 | rwhitby | so I'm reading about coldplugging at the moment |
| 13:57.22 | [g2] | the ipkg install can modify the modprobe.conf and run update-modules right ? |
| 13:57.53 | rwhitby | yeah, but it shouldn't have to |
| 13:58.18 | dyoung | ok now I'm pissed. |
| 13:58.23 | [g2] | well hotplug-ng is what 10 days old now |
| 13:58.42 | rwhitby | yeah, one wonders why we're using it :-) |
| 13:58.51 | [g2] | I think the benefits of saving 2 minutes on boot is a huge deal |
| 13:59.22 | rwhitby | yeah, I guess I never experienced the slow hotplug ... |
| 13:59.35 | [g2] | 3 minute initial boot times |
| 13:59.37 | [g2] | time |
| 14:00.12 | [g2] | for kicks some time change hoptlug-ng to hotplug-linux in the openslug.conf and rebuild |
| 14:00.21 | [g2] | it's an easy change for users |
| 14:00.40 | [g2] | we've got the same issue with usb-eth adapters |
| 14:01.20 | rwhitby | hotplug-linux no longer exists as a package as far as I can see (unless it's hiding in another directory) |
| 14:01.23 | rwhitby | BTW, should /etc/interfaces be /tmp/interfaces in sysconfsetup ? |
| 14:01.54 | [g2] | /etc/network/interfaces ? |
| 14:02.12 | rwhitby | no, the /etc/interfaces file that you use for doing the sed's on |
| 14:02.26 | rwhitby | it should probably be in /tmp |
| 14:02.46 | [g2] | since it's a 1-shot I put it in /etc |
| 14:03.16 | [g2] | it only happens on first-boot or when the user deletes that file |
| 14:03.26 | rwhitby | but it's a tmp file, right? it shouldn't persist in /etc after it has been copied to /etc/network/interfaces |
| 14:04.12 | [g2] | it's a backup of the /etc/network/interfaces file for possible recovery |
| 14:04.21 | [g2] | you see that mv that's commented out ? |
| 14:04.46 | rwhitby | recovery from what? |
| 14:04.53 | [g2] | I'd comment out the cp an uncomment the mv |
| 14:05.18 | rwhitby | but you still should do the intermediate stuff in a /tmp/... file, not a /etc/... file. |
| 14:05.50 | rwhitby | since /etc/interfaces is not a real fle |
| 14:06.07 | rwhitby | file |
| 14:06.08 | [g2] | it is in OpenSlug |
| 14:06.14 | [g2] | it's our distro |
| 14:06.30 | rwhitby | but you just said you were going to mv it to /etc/network/interfaces. |
| 14:07.05 | rwhitby | (instead of copying it, and leaving an /etc/interfaces file that nothing uses) |
| 14:07.06 | [g2] | I was on the fence about moving it so I've got a cp in there right now |
| 14:07.32 | rwhitby | why would you want to keep it? |
| 14:07.58 | [g2] | So I could ask a beta user diff /etc/interfaces /etc/network/interfaces |
| 14:08.19 | rwhitby | why? they'd be the same |
| 14:08.24 | [g2] | Ah... somethings changed from when it was first working |
| 14:10.04 | rwhitby | I can understand asking a beta user to diff /etc/network/interfaces.old and /etc/network/interfaces ... |
| 14:10.50 | rwhitby | but I don't see the point in keeping /etc/interfaces, or for not using /tmp/interfaces for the temporary working file. |
| 14:11.19 | rwhitby | (as I've done later in that file for hostname and resolv.conf) |
| 14:11.30 | [g2] | I meant it to be a persistent file |
| 14:11.48 | rwhitby | why? |
| 14:12.53 | [g2] | Initially for debugging and checking whether any initscripts modified the file during network startup, and as a backup of the file for users in beta |
| 14:13.29 | rwhitby | ok, I can understand the initial debugging, but I don't understand the backup |
| 14:13.36 | [g2] | I know the networking scripts don't modify that |
| 14:14.31 | rwhitby | if a user wants to recreate the /etc/network/interfaces file, they can just rm /etc/linksysconf and re-run the sysconfsetup script ... |
| 14:15.47 | [g2] | right and if the sysconf partition got trashed in the meantime it'd be different than the original |
| 14:16.30 | rwhitby | right, but what can happen to the original? (other than users manually modifying it)? |
| 14:16.56 | rwhitby | (the original being the one that sysconfsetup created, not the original original one) |
| 14:17.09 | rwhitby | we don't backup other files that the user can modify .... |
| 14:17.21 | rwhitby | that's the user's responsibility |
| 14:17.48 | rwhitby | (I can understand the initial debugging, but am questioning the need for it now) |
| 14:18.57 | rwhitby | The reason why it bugs me is I can see people going and editing that file, and then asking questions like "I edited /etc/interfaces, and now I can't access my openslug slug on the new network address that I gave it" cause they are editing the wrong file. |
| 14:19.31 | rwhitby | We don't need that potential source of confusion ... |
| 14:20.32 | rwhitby | I could live with /etc/original-linksys-network-settings, but not /etc/interfaces .... |
| 14:21.10 | [g2] | there are two choices: |
| 14:21.54 | [g2] | 1/ change the /etc/interfaces name to a somewhat better name like /etc/original-network-settings |
| 14:22.17 | [g2] | 2/ remove the cp and uncomment the mv |
| 14:22.51 | rwhitby | for #2, I would strongly suggest that the intermediate file be put in /tmp |
| 14:23.42 | rwhitby | I can live with either (with the additon on #2), but don't see the necessity of #1. |
| 14:25.07 | [g2] | I don't expect you to agree with everything |
| 14:25.34 | rwhitby | agreed :-) |
| 14:25.35 | [g2] | as for #1 it's a naming choice which I agree could cause some confusion |
| 14:26.29 | rwhitby | what's the rationale for #1 (now that the initial debug is over) ? |
| 14:27.33 | [g2] | For the last time ... It's the original file created distinct from the actual file being used |
| 14:27.54 | [g2] | which differs from the .old file with is an original that OE created |
| 14:28.37 | rwhitby | ok, shall we go with #1 then? |
| 14:29.32 | [g2] | I'm fine with original-network-settings |
| 14:29.43 | rwhitby | that sounds good to me too |
| 14:30.14 | rwhitby | and keeps linksys out of the name ;-) |
| 14:30.24 | [g2] | exactly |
| 14:31.51 | [g2] | speaking of update or you going to update the Beta Release wiki with the status of the networking additions (resolv.conf ...) |
| 14:32.47 | rwhitby | done |
| 14:33.14 | rwhitby | oops - dhcp support is not there yet |
| 14:33.56 | rwhitby | fixed |
| 14:34.08 | CIA-11 | 03rwhitby 07 * r1.2892 10openembedded/packages/openslug-init/openslug-init-0.10/sysconfsetup: Changed the name of the original network settings file in OpenSlug |
| 14:34.24 | [g2] | and I *DO* fully agree with the /tmp policy in general |
| 14:34.30 | rwhitby | anything else we should add to sysconfsetup before I bump the PR ? |
| 14:35.23 | rwhitby | (I'm going to bump to 1.4-alpha too) |
| 14:35.33 | [g2] | Not right now on the sysconfsetup |
| 14:35.42 | [g2] | ok on the 1.4 |
| 14:35.51 | rwhitby | anything else before a 1.4-alpha release? |
| 14:36.19 | [g2] | don't think so |
| 14:37.17 | CIA-11 | 03rwhitby 07 * r1.2894 10openembedded/packages/openslug-init/openslug-init_0.10.bb: OpenSlug-1.4-alpha |
| 14:38.57 | rwhitby | So based on the punchlist, we could go beta with 1.4 if two more alpha testers sign up ... ? (or maybe just one, cause we didn't reserve 13 this time) |
| 14:39.55 | rwhitby | BTW, are you cool with the default hostname being "openslug" instead of "nslu2" (and being overridden with what was in SysConf) ? |
| 14:40.28 | [g2] | I'm fine with that |
| 14:40.54 | rwhitby | we should really set DISTRO_NAME and DISTRO_VERSION somewhere too - so that "OpenSlug" gets into /etc/issue and /etc/issue.net ... |
| 14:40.57 | billwernet2 | I will be testing openslug as of this afternoon. |
| 14:41.10 | rwhitby | ~praise billwernet2 |
| 14:41.12 | jbot | All hail billwernet2! |
| 14:42.10 | [g2] | I think Beta continues to shape up very nicely |
| 14:42.25 | billwernet2 | truth be known I am already running it, but this afternoon I will be actually trying to do real things with it |
| 14:42.39 | [g2] | cool |
| 14:42.55 | [g2] | what are you planning on doing with it ? |
| 14:44.21 | billwernet2 | first two: bluetooth access point for my treo, svn repository |
| 14:44.43 | rwhitby | billwernet2: have I got a deal for you .... |
| 14:44.54 | billwernet2 | oh? |
| 14:45.20 | rwhitby | My devslug is a bluetooth access point for my Treo 650 right now |
| 14:45.21 | billwernet2 | rwhitby: what is that? |
| 14:45.26 | billwernet2 | excellent |
| 14:46.04 | rwhitby | and OpenSlug 1.4 has everything in it that you need (assuming you're building it from source so you can get the extra modules and bluez-utils installed0 |
| 14:46.15 | billwernet2 | wonderful |
| 14:47.22 | rwhitby | all you need to do is add two lines to your local.conf, build openslug, flash it, modify /etc/ppp/options, insmod your usb dongle module, and you're done. |
| 14:47.45 | rwhitby | which dongle do you have? |
| 14:47.55 | rwhitby | (hci_usb?) |
| 14:48.33 | billwernet2 | it is an old linksys usb 1.1 dongle |
| 14:48.43 | rwhitby | USBBT100 ? |
| 14:49.14 | billwernet2 | I think that is right. It is in my other office right now so I can't check the number |
| 14:49.20 | [g2] | we should check out the /etc/modprobe.conf and update-modules |
| 14:49.25 | rwhitby | little antenna? |
| 14:49.32 | billwernet2 | yes, little antenna |
| 14:49.42 | rwhitby | that's the one I've got |
| 14:49.48 | billwernet2 | excellent |
| 14:50.06 | rwhitby | reported widely to be the best by far for a treo |
| 14:50.13 | billwernet2 | interesting |
| 14:50.17 | [g2] | hmmm I'm surprised subversion isn't in OE |
| 14:50.22 | rwhitby | some guy says he gets 1000 feet |
| 14:50.32 | billwernet2 | I have just had it sitting around for awhile and thought it might work for this purpose |
| 14:50.40 | billwernet2 | 1000 feet, nice |
| 14:50.55 | billwernet2 | I would be happy with 200-300 |
| 14:51.09 | rwhitby | my property is nowhere near that large, so I haven't tested that range :-) |
| 14:51.17 | billwernet2 | understand |
| 14:51.32 | rwhitby | I have tested 20 metres |
| 14:52.09 | rwhitby | (that was the boundary of my property at midnight) |
| 14:52.40 | billwernet2 | well, I will work on that this afternoon and report back; I will see what sort of distance I can get |
| 14:52.59 | rwhitby | I'm writing the wiki page as we speak |
| 15:01.41 | billwernet2 | great, I will check it out when done |
| 15:02.26 | rwhitby | http://www.nslu2-linux.org/wiki/HowTo/BuildABlueSlug |
| 15:03.17 | rwhitby | Feel free to edit that to make it more user-friendly, or to correct any incorrect or missing steps. |
| 15:04.36 | billwernet2 | looks good, I will follow that procedure and report back |
| 15:04.45 | rwhitby | ok, night all |
| 15:05.58 | rwhitby-asleep | I guess you should add a step somewhere there about plugging in a compatible bluetooth usb adapter :-) |
| 15:06.42 | ByronT-zzZZZzz | morning all |
| 15:07.36 | billwernet2 | rwhitby-asleep: lol |
| 15:07.42 | *** join/#nslu2-linux robertd (~xkill@pc176.wolsztyn.sdi.tpnet.pl) |
| 15:08.02 | [g2] | rwhitby-asleep, sweet dreams! |
| 15:08.06 | ByronT | <- finished reading log... |
| 15:08.08 | rwhitby-asleep | ByronT: 1.4 has just been released |
| 15:08.23 | ByronT | I can add the 13 blank to the OSlug table |
| 15:08.55 | ByronT | I read that - with the network config... :) |
| 15:13.21 | ByronT | rwhitby-asleep- 1.4... dang it, I really need to get colinux with debian building on this laptop |
| 15:14.02 | [g2] | rwhitby-asleep, Ummm.... networking is broke for me with the last build |
| 15:14.42 | rwhitby-asleep | what broke? |
| 15:15.00 | [g2] | ixp isn't up |
| 15:15.39 | [g2] | Setting up IP spoofing protection: rp_filter. |
| 15:15.39 | [g2] | Configuring network interfaces... ifup: option with empty value " gateway" |
| 15:15.39 | [g2] | done. |
| 15:16.01 | rwhitby-asleep | oh - you didn't have a gateway set in your sysconf? |
| 15:16.14 | [g2] | nope I'm point-to-point |
| 15:16.39 | rwhitby-asleep | hmmm - didn't think of that. |
| 15:16.43 | [g2] | it's all on the same segment |
| 15:18.31 | rwhitby-asleep | heh - no wonder you didn't have gateway in the first versions of sysconfsetup :-) |
| 15:19.02 | rwhitby-asleep | any suggestions on the best way to test for that? |
| 15:20.27 | [g2] | I'd image we can check for the null gateway and not put the line in there |
| 15:20.33 | [g2] | imagine |
| 15:20.48 | rwhitby-asleep | sorry about that - but at 1:50am here I can't think of an easy way to do that, so I'll have to leave it in your capable hands :-) |
| 15:21.14 | rwhitby-asleep | or just delete those lines and I'll fix it tomorrow ... |
| 15:22.27 | rwhitby-asleep | we should do the same for netmask too |
| 15:23.24 | rwhitby-asleep | and dns_server1. hostname is ok |
| 15:24.06 | rwhitby-asleep | I think we can assume that hw_addr and ip_addr will be required to flash openslug in the first place :-) |
| 15:24.40 | rwhitby-asleep | catch you tomorrow ... |
| 15:24.49 | rwhitby-asleep | (sorry to leave something broken) |
| 15:25.10 | ByronT | btw, what will be setting "DISK" LED in OpenSlug? |
| 15:56.13 | giel | what's up with those fosdem announcements? |
| 15:56.34 | giel | oh wait |
| 15:56.50 | giel | nm |
| 16:03.05 | [g2] | giel, are you playing with the LEDs at all |
| 16:03.42 | [g2] | ByronT, right now the DISK LEDs aren't getting set |
| 16:06.48 | ByronT | I can see that... :) FrankenSlug is happily humming next to me |
| 16:07.52 | [g2] | ByronT, just FYI I've added some stuff to the turn up page on the wiki capturing a bunch of this stuff |
| 16:11.05 | *** join/#nslu2-linux jp30 (~josh@dcn236-147.dcn.davis.ca.us) |
| 16:14.16 | [g2] | billwernet2, did you have a gateway value in the setup ? |
| 16:40.12 | *** join/#nslu2-linux rwhitby-away (~rwhitby@rwhitby.nslu2-linux) |
| 17:16.26 | *** join/#nslu2-linux VoodooZ_home (~stephane6@CPE00c0f021712c-CM014110003785.cpe.net.cable.rogers.com) |
| 17:40.42 | CIA-11 | 03jp30 * 10unslung/ (make/php.mk sources/php/php.ini): php: fix bug 108; enable many more modules |
| 17:47.26 | CIA-11 | 03jp30 * 10unslung/Makefile: promote ghostscript, tcpdump; demote perl-spamassassin |
| 17:49.20 | *** join/#nslu2-linux KsiLaptop (~ksilebo@d47-69-56-108.try.wideopenwest.com) |
| 18:06.13 | ByronT | oooh... refurb nslu2 for $69.19 at newegg.com |
| 18:07.16 | ka6sox-zzzz | I need one! |
| 18:07.21 | ka6sox-zzzz | I'm out of slugs! |
| 18:07.31 | ByronT | limit 2 per customer |
| 18:07.38 | ByronT | http://www.newegg.com/app/SearchProductResult.asp?Submit=Go&DEPA=0 |
| 18:07.57 | ByronT | http://www.newegg.com/app/ViewProductDesc.asp?description=33-124-036R&depa=0 |
| 18:08.03 | ByronT | sorry that first link is wrong |
| 18:08.51 | ka6sox-zzzz | np |
| 18:08.53 | ka6sox-zzzz | ordering |
| 18:09.08 | ByronT | ka6sox-zzzz- zzzz... |
| 18:09.11 | ByronT | WAKE UP! |
| 18:10.45 | ka6sox-zzzz | coffee.....coffeee! |
| 18:12.14 | ka6sox-zzzz | been reading logs while the coffee has been brewing |
| 18:12.32 | ka6sox-zzzz | okay picked up a recon |
| 18:13.35 | ByronT | finshing up my 3rd or 4th cup of joe this morning |
| 18:13.50 | ka6sox-zzzz | starting number 1 |
| 18:15.00 | ByronT | ok.. ordering a refurb, another bytecc enclosure and a seagate 160GB drive... total < $200 |
| 18:15.26 | kergoth | $69.19? damn, i should buy a second, even though i rarely use my first |
| 18:15.30 | kergoth | :) |
| 18:15.34 | ka6sox-zz | ByronT, do you fish? |
| 18:15.48 | ByronT | kergoth, wait til my order goes through.. ;P |
| 18:16.14 | ByronT | ka6sox-zz, I do not.. used to, no time these days |
| 18:16.30 | *** join/#nslu2-linux volsung (~volsung@cpe-66-68-113-106.austin.res.rr.com) |
| 18:16.50 | ka6sox-zz | you are like a big bass who takes the lure all the way down his throat...hooked hard. |
| 18:17.12 | ByronT | just because I've got a slug farm? |
| 18:17.18 | ka6sox-zz | yes |
| 18:17.23 | ByronT | I'm hoping that they'll start reproducing |
| 18:17.24 | ka6sox-zz | I have 4 slugs now. |
| 18:17.37 | ByronT | 3 here... 4th on the way |
| 18:18.11 | ByronT | but 1 is really a customer's |
| 18:18.34 | ByronT | so I will have 3... this 3rd one - maybe "Bride of Frankenslug"? |
| 18:19.18 | ByronT | ka6sox-zz, you have that page for gastronomic specs? |
| 18:19.56 | ka6sox-z | okay refresh my weiry eyes...what gastronomic pages? |
| 18:20.09 | ka6sox-z | url? |
| 18:20.19 | ka6sox-z | I'll add the specs. |
| 18:20.39 | ByronT | I thought you guys were going to post specs for "official" cross-build machine |
| 18:21.08 | ka6sox-z | is there a page already? |
| 18:21.10 | ByronT | http://www.nslu2-linux.org/wiki/Info/CrossBuildMachine |
| 18:25.52 | ka6sox-z | okay I've updated it...need more coffee before continuing |
| 18:26.20 | ByronT | I've switched to Mt. Dew already |
| 18:27.03 | ka6sox-z | working on that stack? |
| 18:27.26 | ByronT | yeah, I was wanting the specs such that I can order... mthrbd, vid, case, etc.... |
| 18:27.39 | ByronT | "that stack"? |
| 18:27.44 | ka6sox-z | let me send you a copy of the order. |
| 18:28.25 | ByronT | I've never received any of previous emails... but send to byron-port@toddcomp.com |
| 18:28.31 | ka6sox-z | I thought you had a stack of Mt. Dew cases. |
| 18:28.54 | ByronT | that's only at the beginning of the week... by Saturday, down to last case |
| 18:30.36 | ByronT | d'oh! I'm going to have to get another switch for the slugs to connect to... |
| 18:34.12 | ka6sox-z | ByronT, check email. |
| 18:34.22 | ka6sox-z | it *should* be on the way. |
| 18:34.26 | ka6sox-z | its HTML formate. |
| 18:37.26 | ByronT | ka6sox-away, I haven't gotten it, can you reply to that email I sent you a while back and add details? |
| 18:37.31 | ka6sox-away | blowout...bath tim! |
| 18:37.54 | ka6sox-away | have you got a gmail account? |
| 18:38.04 | ByronT | byrontodd@ |
| 18:38.42 | ka6sox-away | that has always worked for me. |
| 18:39.02 | glc | Pull bk://nslu2-linux@nslu2-linux.bkbits.net/unslung-4.x |
| 18:39.07 | glc | <PROTECTED> |
| 18:39.07 | glc | Pseudo-terminal will not be allocated because stdin is not a terminal. |
| 18:39.07 | glc | nslu2-linux@nslu2-linux.bkbits.net's password: |
| 18:39.22 | glc | Has my key been lost during the switchover or something? |
| 18:39.42 | ka6sox-away | glc: I don't think we have changed that in a while. |
| 18:40.02 | glc | I have been down for a week due to DSL problems. |
| 18:40.12 | ka6sox-away | ugh. |
| 18:40.32 | ka6sox-away | rwhitby manages that so when he gets up and reads the logs it'll get looked at. |
| 18:40.37 | ka6sox-away | (about 4hrs |
| 18:40.56 | glc | OK doing openslug compile now ayway. |
| 18:41.06 | ka6sox-away | ByronT, got it yet? |
| 18:41.15 | ka6sox-away | the DVD-RW is optional. |
| 18:41.22 | ByronT | got it |
| 18:42.05 | ByronT | samsung has a little cheaper hd now... |
| 18:44.32 | ByronT | thanks for the gmail.. maybe end of month a clone of gastro built here |
| 18:46.49 | ka6sox-away | ByronT: you bought exactly what gastro is today. |
| 18:47.06 | ka6sox-away | the bytecc case and all. |
| 18:47.27 | ByronT | well, -nomic clone then.... |
| 18:47.33 | ByronT | I meant build clone... |
| 18:47.38 | ka6sox-away | yeah. |
| 18:57.24 | *** join/#nslu2-linux rwhitby-away (~rwhitby@rwhitby.nslu2-linux) |
| 18:59.28 | ByronT | whelp... newegg.com just ran out of the refurbs |
| 19:03.58 | *** join/#nslu2-linux Wipmac (drfonk@J9332.j.pppool.de) |
| 19:10.56 | *** join/#nslu2-linux __foo__ (~chris@pcp09943963pcs.hyatsv01.md.comcast.net) |
| 19:15.29 | ka6sox-away | heya _chris_ |
| 19:15.34 | ka6sox-away | how ya doing? |
| 19:16.08 | _chris_ | hey ka6sox-away. good. you? |
| 19:17.57 | ka6sox-away | pretty good... |
| 19:18.17 | ka6sox-away | been buzy here with getting build machines setup and moving data around. |
| 19:18.38 | _chris_ | what are the machines building? |
| 19:21.10 | ka6sox-away | native compile machine and cross compile machine for Unslung/Unslung Packages/Openslug |
| 19:22.05 | ka6sox-away | http://nslu2-linux.thestuffguy.com/gallery/gastronomic |
| 19:22.22 | ka6sox-away | pictures |
| 19:23.25 | _chris_ | hey a shuttle! |
| 19:23.25 | _chris_ | cool |
| 19:23.51 | ka6sox-away | yeah. |
| 19:23.54 | _chris_ | that's all i buy :) |
| 19:24.01 | _chris_ | great boxes |
| 19:24.02 | ka6sox-away | small and a workhorse. |
| 19:24.16 | _chris_ | and mobile too - i take one of mine to work everyday instead of a laptop |
| 19:25.22 | ka6sox-away | in one of the cases? |
| 19:25.25 | ka6sox-away | (tote bags) |
| 19:25.35 | _chris_ | yup. $20 and it's great :) |
| 19:25.45 | _chris_ | you can carry your scheduling book, ipod, etc |
| 19:26.27 | ka6sox-away | cool. |
| 19:26.46 | ka6sox-away | I'm looking at a A64 shuttle for a replacement of my main server |
| 19:26.57 | _chris_ | that's what my desktop is (that i take to work) |
| 19:27.37 | _chris_ | http://tinyurl.com/4rp3o |
| 19:27.48 | ka6sox-away | waiting for the Nforce4 board to come out. |
| 19:28.03 | ka6sox-away | going to lock it in C&Q and let it idle. |
| 19:28.13 | _chris_ | gotcha. linux works with the sensors in the nforce3. gkrellm can hook up to them perfectly |
| 19:29.08 | ka6sox-away | does it have a raid controller onboard? |
| 19:29.30 | _chris_ | yes - raid1. from Silicon something or other (Sil) |
| 19:29.53 | ka6sox-away | hmmm...which model of Shuttle? |
| 19:30.54 | _chris_ | the one i linked above |
| 19:33.30 | ka6sox-away | looking |
| 19:40.44 | *** join/#nslu2-linux CIA-1 (~CIA@flapjack.navi.cx) |
| 19:52.15 | ka6sox-away | that looks good. |
| 19:52.25 | _chris_ | ya it's a nice box. very happy with it so far |
| 19:55.20 | ka6sox-away | _chris_, it looks good...I need an extra 3.5" bay...for the second HD> |
| 19:57.57 | kergoth | hmm, that shutttle does look nice. i need to upgrade |
| 19:58.07 | kergoth | my desktop is an old 1ghz athlon tbird |
| 19:58.07 | kergoth | heh |
| 20:15.28 | *** join/#nslu2-linux cbrake (~cbrake@a22c174.neo.lrun.com) |
| 20:30.39 | ka6sox-away | _chris_, have you tried C&Q on that box? or just full speed? |
| 20:32.55 | kergoth | hmm, $899 for a shuttle xpc, athlon64 3400, ati 9600xt, 512 ddr |
| 20:46.43 | *** join/#nslu2-linux cbrake_ (~cbrake@a22c174.neo.rr.com) |
| 20:53.13 | *** join/#nslu2-linux rwhitby-away (~rwhitby@rwhitby.nslu2-linux) |
| 20:54.52 | ka6sox-away | I need a cool and quiet server. |
| 21:01.20 | ByronT | ka6sox-away, have you thought about using a slug running apache? |
| 21:01.22 | ByronT | ;) |
| 21:02.29 | ka6sox-away | not fast enough |
| 21:02.45 | ByronT | (tongue firmly in cheek) |
| 21:03.13 | ka6sox-away | he he |
| 21:05.21 | ByronT | bbl (going to test drive my bud's X5) |
| 21:16.26 | glc | ERROR: Nothing provides e2fsprogs - while trying to bb openslug-image |
| 21:17.16 | kergoth | e2fsprogs is in oe. |
| 21:17.31 | kergoth | sounds like you 1) are using the symlink setup and are missing links, or 2) did a bk pull without doing bk -r co -q |
| 21:17.49 | kergoth | or the usual suspects, incorrect BBFILES, incorrect BBMASK, whatever |
| 21:18.29 | glc | Symlink exists, and I just did a fresh pull, and did th bk -r co -q |
| 21:18.42 | kergoth | you did a bk -r co -q? |
| 21:19.39 | glc | Nothing to pull. |
| 21:19.46 | kergoth | are you not listening? |
| 21:19.55 | kergoth | i dont remember telling you to run bk pull |
| 21:20.01 | glc | I said I did 3 lines up. |
| 21:20.13 | kergoth | well, you're doing something wrong. |
| 21:20.18 | kergoth | look in openembedded/packages/e2fsprogs/ |
| 21:20.25 | kergoth | confirm that the .bbs exist |
| 21:20.30 | kergoth | then confirm that your symlinks arent dead |
| 21:22.07 | glc | .bbs does not exist. |
| 21:23.10 | kergoth | eh |
| 21:23.14 | kergoth | the s is plural. |
| 21:23.27 | kergoth | .bb files. |
| 21:23.36 | glc | There are 5 of them. |
| 21:24.15 | kergoth | good. now check the other things i recommended. |
| 21:27.29 | *** join/#nslu2-linux pTweety (~pTweety@dialin-145-254-203-193.arcor-ip.net) |
| 21:27.51 | pTweety | hi |
| 21:28.32 | pTweety | has someone already setup apache as https server? |
| 21:30.02 | glc | kergoth: It was a missing symlink. I had checked it but with all these build areas I have here I must have looked in the wrong one. |
| 21:30.05 | glc | Thanks. |
| 21:34.17 | glc | The symlink needs to be added to nslu2-linux.bkbits.net/nslu2-package-symlinks |
| 21:35.46 | glc | Build completed. |
| 21:39.27 | dyoung | glc, I've started a fresh pull/build now. When I hit that e2fsprogs bit I'll add it plus whatever else is missing. |
| 21:39.39 | dyoung | (fresh pull/build using the symlink package that is) |
| 21:53.20 | glc | Everything else built fine. I will flash shortly. |
| 21:55.35 | ka6sox-away | glc: this is the beta release code that you are building? |
| 21:57.52 | glc | Just pulled. |
| 21:58.38 | pTweety | ok, forget my question. I've https configured and running fine. |
| 22:07.06 | pTweety | Just for the record. Adding the option -DSSL to httpd in S80apache and reading this page http://httpd.apache.org/docs-2.0/ssl/ssl_faq.html solved it for me. |
| 22:10.02 | glc | Boots quick. |
| 22:11.02 | *** join/#nslu2-linux [g2] (~g2@g2.nslu2-linux) |
| 22:12.00 | ka6sox-away | pTweety, write up a wiki page please? |
| 22:12.10 | ka6sox-away | It can be simple. |
| 22:12.42 | pTweety | Jepp, I will do it asap |
| 22:13.27 | ka6sox-away | thanks. |
| 22:22.30 | [g2] | billwernet2, ping ! |
| 22:29.44 | glc | Interrupt problems on /dev/sda with openslug. |
| 22:31.44 | ka6sox-away | lots of them or what? |
| 22:32.50 | glc | Maybe ehci. Running mkfs.ext3 and I get a screen full of messages. |
| 22:33.46 | glc | This is on the serial console. |
| 22:34.32 | ka6sox-away | when you run fdisk it sees it correctly? |
| 22:34.42 | ka6sox-away | or did you fdisk it on another machine? |
| 22:36.20 | glc | Yes it sees it fine under fdisk. It disconnected and reconnected as sdb. |
| 22:40.41 | glc | I have 3 ext3 partitions. The first mkfs.ext3 will run fine. The errors occure on subsequent runs. |
| 22:41.25 | glc | I am going to reboot and try it again. |
| 22:42.27 | ka6sox-away | reboots sometimes clear up things...however if its repeatable maybe a slugbug is in order. |
| 22:43.25 | glc | Failed first time this time. |
| 22:43.44 | glc | This drive worked fine under unslung. |
| 22:44.19 | glc | I will try a fresh fdisk and format. |
| 22:44.39 | *** join/#nslu2-linux siddy-v6 (~sid@2001:5c0:857f:0:0:0:0:1) |
| 22:44.49 | siddy-v6 | finally... |
| 22:50.09 | [g2] | Congrats siddy-v6 |
| 22:52.13 | siddy-v6 | took ages to get that thing running on openslug, but now my IPv6-tunnel-gateway is finally back at work! ;) |
| 22:54.05 | [g2] | Cool. Which version of openslug are you running ? |
| 22:54.31 | siddy-v6 | 1.3-alpha |
| 22:54.56 | [g2] | siddy-v6 is just so state-of-the-art :) |
| 22:55.33 | siddy-v6 | :) |
| 22:56.04 | siddy-v6 | oh, I notice lot's of system-alignment-errors with this new version. |
| 22:56.20 | siddy-v6 | I see 2681 errors at bootup! :-\ |
| 22:56.43 | siddy-v6 | any idea where those suddenly come from? |
| 22:56.48 | [g2] | Really ? That must be the ipv6 stuff |
| 22:57.20 | siddy-v6 | hm... I get the errors without the ipv6-module, but it may be the dual-stack... |
| 22:57.51 | [g2] | hmmm, maybe be not ! |
| 22:58.04 | siddy-v6 | I'll check somewhen in the next days, they don't seem to hurt too much atm. |
| 22:59.08 | [g2] | some halfword is clealy not aligned |
| 22:59.25 | siddy-v6 | but there definetely seems to be a alignment-problem in the ipv6-code, I get lots of errors as I type in here. |
| 23:01.58 | glc | ka6sox-away: I will try another drive. |
| 23:06.13 | glc | ka6sox: @nd drive in port 2 worked ok. I'll swap them around and see what happens. |
| 23:07.17 | pTweety | can someone please add this page to the howto page: http://www.nslu2-linux.org/wiki/HowTo/EnableHTTPSforApache |
| 23:08.20 | [g2] | pTweety, thx that looks nice |
| 23:10.31 | pTweety | np, but beware of my german-english |
| 23:12.52 | glc | Both drives on both ports. Same problem. |
| 23:14.26 | ka6sox-away | glc: ugh. |
| 23:23.07 | *** join/#nslu2-linux siddy (~sid@2001:5c0:857f:0:0:0:0:1) |
| 23:30.00 | glc | ka6sox-away: slugbug submitted. |
| 23:30.08 | ka6sox-away | glc: thanks |
| 23:33.46 | *** join/#nslu2-linux KsiLaptop (~ksilebo@d47-69-56-108.try.wideopenwest.com) |
| 23:48.01 | siddy | nite folks! |
| 23:51.02 | ka6sox-away | nite Siddy |
| 23:55.35 | *** join/#nslu2-linux copperbeech-log (~copperbee@82-40-186-72.cable.ubr04.newm.blueyonder.co.uk) |
