| 00:00.03 | *** join/#htc-linux AstainHellbring (~AstainHel@unaffiliated/astainhellbring) |
| 00:02.10 | *** join/#htc-linux bartman (~bart@2607:f2c0:a000:175:2e0:81ff:fe47:3d01) |
| 00:06.45 | WisTilt2 | rpierce99: if you want to try this kernel and see if you get higher fps. i removed all this fake vsync stuff and am seeing 24.5fps with no acpu oc'ing. |
| 00:07.19 | rpierce99 | should i remove my oc then? |
| 00:07.30 | WisTilt2 | try it with it on then off just to compare |
| 00:09.41 | *** join/#htc-linux bzo (~chatzilla@c-174-62-79-238.hsd1.ca.comcast.net) |
| 00:11.02 | WisTilt2 | hi bzo |
| 00:11.10 | bzo | hi WisTilt2 |
| 00:11.44 | WisTilt2 | setting gpu registers at hw3d open each time seems to have fixed the rogue divisor changing |
| 00:12.05 | bzo | sounds like a good workaround |
| 00:12.32 | WisTilt2 | yeah but i wish i know exactly what was changing those since nothing appears to use pll3 |
| 00:12.58 | WisTilt2 | has to be arm9 unless im overlooking something |
| 00:13.26 | bzo | must be, the a9 resets pll1 on sleep which is why we have to restore the OC settings |
| 00:13.33 | bzo | err pll2 I mean |
| 00:14.17 | bzo | so will the gpu be clocked back down when hw3d is closed also? |
| 00:14.54 | WisTilt2 | yes |
| 00:15.41 | WisTilt2 | actually clocking it down to tcxo:) need to see how to power it off completely though. |
| 00:16.08 | bzo | so in the current stuff, it is on all the time? |
| 00:16.17 | WisTilt2 | dont think we can power off, it looks like its stacked on the same rail as cpu |
| 00:16.21 | WisTilt2 | yes it is |
| 00:16.32 | bzo | hopefully it has some good power gating then |
| 00:16.52 | bzo | but we'll want it on anyways when jonpry is done with his compositor |
| 00:17.28 | WisTilt2 | i dont think it draws much at idle anyway. if we can keep drain down to under 1% hr in sleep i think we're good |
| 00:17.29 | jonpry | i dunno how many people will want to give up games for it |
| 00:17.45 | rpierce99 | 24.2fps/24.3fps @ 614400 |
| 00:17.54 | WisTilt2 | jonpry: i removed all the fake vsync stuff |
| 00:18.03 | bzo | jonpry: can't be switched back and forth? |
| 00:18.19 | WisTilt2 | rpierce99: ok. now no oc it shouldnt really change |
| 00:18.34 | jonpry | not currently. and i don't see an easy way to get that done |
| 00:18.44 | bzo | WisTilt2: any increase in frame rate with removal of fake vsync? |
| 00:18.44 | jonpry | WisTilt2, can you break 35? |
| 00:18.51 | *** join/#htc-linux vinceweis_ (4463ed13@gateway/web/freenode/ip.68.99.237.19) |
| 00:18.52 | WisTilt2 | games are for high end desktops anyway:) |
| 00:19.07 | WisTilt2 | no, 35 +/- 10% is it for these panels |
| 00:19.28 | WisTilt2 | bzo i see a small increase but less than 1fps with no fake |
| 00:19.33 | bzo | are there any 3d games even worth playing on our devices? |
| 00:19.37 | WisTilt2 | i really dont see why its even in there |
| 00:20.14 | WisTilt2 | arrrghhh got 36+ at one point but we're not going to see higher im pretty sure |
| 00:20.38 | bzo | 35 is worthwhile increase over 30 anyways |
| 00:20.38 | jonpry | need that workqueue |
| 00:20.51 | jonpry | thats from running the panel at 70hz |
| 00:21.30 | bzo | I guess the minus is that it may use more power |
| 00:21.32 | WisTilt2 | this really looks smoother with panel at 70hz but again it might be a placebo |
| 00:30.25 | rpierce99 | first run at stock 24.0fps, second 24.4 |
| 00:30.58 | WisTilt2 | no big change good. i have one more to try if you have time |
| 00:31.16 | arrrghhh | WisTilt2, how goes it |
| 00:31.18 | rpierce99 | up now? |
| 00:31.30 | WisTilt2 | ok just uploaded |
| 00:31.41 | WisTilt2 | hiya arrrghhh, busy day as you expected? |
| 00:31.44 | arrrghhh | yea |
| 00:31.53 | arrrghhh | i'm struggling to find things to do now, so i popped on :D |
| 00:32.01 | WisTilt2 | any crashes or it all go smooth |
| 00:32.41 | arrrghhh | haven't done the DR test |
| 00:32.44 | arrrghhh | gotta wait for the dept to close |
| 00:32.53 | arrrghhh | i've just been prepping for the training/cut tomorrow |
| 00:33.46 | WisTilt2 | positive vibes, it will go smooth |
| 00:34.02 | arrrghhh | thanks mate. i feel pretty good |
| 00:34.15 | arrrghhh | we've had 2 groups on it for 3 months almost |
| 00:34.24 | WisTilt2 | some good scotch tonight, good night sleep an all will be well |
| 00:34.28 | arrrghhh | so most of the system-wide bugs hopefully have surfaced by now. |
| 00:34.33 | arrrghhh | hahaha |
| 00:34.38 | arrrghhh | should see if i can expense that |
| 00:35.09 | WisTilt2 | that's why its called engineering fluid |
| 00:35.15 | arrrghhh | :D |
| 00:35.40 | WisTilt2 | ok got 29.7fps on this one 1st run |
| 00:36.50 | WisTilt2 | 29.4 2nd run |
| 00:37.10 | arrrghhh | catching up on da logs, you want me to run this too? |
| 00:37.12 | arrrghhh | no OC? |
| 00:37.19 | WisTilt2 | nope just 528mhz |
| 00:37.44 | arrrghhh | got nothing better to do, might as well. |
| 00:37.46 | WisTilt2 | this one has gpu like before @ 250 and axi up at 192mhz |
| 00:37.55 | arrrghhh | k |
| 00:41.08 | rpierce99 | #22? |
| 00:41.59 | WisTilt2 | yep |
| 00:42.16 | rpierce99 | hm, i'm getting 24.x still |
| 00:43.54 | WisTilt2 | let me see your pll table |
| 00:44.07 | rpierce99 | you'll have to tell me how to do that |
| 00:44.25 | jonpry | blasted texturemanager |
| 00:44.34 | WisTilt2 | top of dmesg, the table that lists cpu freq etc and the PLL0 @ lines below it |
| 00:45.24 | rpierce99 | 245, 960,1056,196 |
| 00:45.43 | rpierce99 | you want the whole thing? |
| 00:46.00 | WisTilt2 | yeah need to see the other lines in that table |
| 00:46.07 | rpierce99 | [ 0.073181] PLL0 @ f8005300: MODE=00000007 L=0000000c M=00000004 N=00000005 freq=245760000 Hz (245 MHz) |
| 00:46.07 | rpierce99 | [ 0.073272] PLL1 @ f800531c: MODE=00000007 L=00000032 M=00000000 N=00000001 freq=960000000 Hz (960 MHz) |
| 00:46.07 | rpierce99 | [ 0.073364] PLL2 @ f8005338: MODE=00000007 L=00000037 M=00000000 N=00000001 freq=1056000000 Hz (1056 MHz) |
| 00:46.08 | rpierce99 | [ 0.073425] PLL3 @ f8005354: MODE=00000000 L=0000000a M=00000006 N=00000019 freq=196608000 Hz (196 MHz) |
| 00:46.19 | WisTilt2 | table above that also |
| 00:46.44 | rpierce99 | pm |
| 00:46.55 | WisTilt2 | didnt see that:) |
| 00:47.11 | WisTilt2 | hmm, your axi is still at 160 not 192 |
| 00:47.40 | WisTilt2 | does dmesg show turbo mode capable and enabled or disabled? |
| 00:48.00 | rpierce99 | [ 0.072387] Turbo mode supported and enabled. |
| 00:48.17 | WisTilt2 | hmm, ok let me look. maybe i didnt add the axi to cdma |
| 00:49.32 | arrrghhh | hrm. i got 18.5, but my gf is insisting on txting me whilst i benchmark. what is she thinking... |
| 00:49.43 | rpierce99 | how dare she |
| 00:50.24 | arrrghhh | 23.1 |
| 00:50.27 | arrrghhh | that looks "better" |
| 00:50.30 | arrrghhh | rpierce99, i know. the nerve. |
| 00:51.31 | arrrghhh | 23.4. dmesg tiem |
| 00:52.16 | WisTilt2 | ok try this one. guess i missed the cdma table |
| 00:57.36 | rpierce99 | axi is definitely 192 this time |
| 00:57.53 | WisTilt2 | better be |
| 00:58.28 | WisTilt2 | man at close to 30fps the robot really moves around quickly |
| 00:59.28 | rpierce99 | froze :( |
| 00:59.49 | WisTilt2 | where did it freeze? |
| 00:59.55 | rpierce99 | didn't even get a data connection, froze with the screen on at the lock screen |
| 01:00.07 | rpierce99 | i'll reboot just in case |
| 01:00.34 | jonpry | such high standards |
| 01:00.37 | WisTilt2 | k. we ran axi at 192 on those 400's lots of times so probably a glitch on that boot |
| 01:05.47 | *** join/#htc-linux mitsutaka (~mitsutaka@219.143.36.82) |
| 01:06.14 | WisTilt2 | kexec is so nice |
| 01:07.15 | *** join/#htc-linux mitsutaka (~mitsutaka@219.143.36.82) |
| 01:08.21 | *** join/#htc-linux kcrazy (~kcrazy@218.247.215.252) |
| 01:11.17 | *** join/#htc-linux furtardo (~mks@nat/yahoo/x-ioublykoihbshkyw) |
| 01:15.10 | WisTilt2 | i have to get out of here. off to grandsons xmas show at school. back on later from home. |
| 01:21.40 | rpierce99 | yeah next boot was fine but neocore is still spitting out a 24.xfps |
| 01:24.27 | *** join/#htc-linux d3tul3 (~oliver@unaffiliated/d3tul3) |
| 01:25.00 | arrrghhh | sad |
| 01:31.56 | *** join/#htc-linux AstainHellbring (~AstainHel@unaffiliated/astainhellbring) |
| 01:32.14 | *** join/#htc-linux furtardo (~mks@nat/yahoo/x-svhwefirvfjrauxo) |
| 01:33.57 | arrrghhh | rpierce99, pretty much the same story here as well. oh well. |
| 01:34.05 | arrrghhh | slowly climbing in performance. |
| 01:37.50 | *** join/#htc-linux toer (~tore@179.81-166-86.customer.lyse.net) |
| 01:45.18 | *** join/#htc-linux hardwalker (~hardwalke@122-117-115-146.HINET-IP.hinet.net) |
| 01:46.54 | jonpry | i got a new sd card. wherez the gb image? |
| 01:48.06 | jonpry | gonna try to break the 30fps barrier |
| 01:48.08 | arrrghhh | jonpry, 1 sec |
| 01:48.26 | d3tul3 | jonpry, with 3.1 right ? :) |
| 01:48.36 | jonpry | hmm. i guess |
| 01:48.49 | jonpry | just test it with fps2d? |
| 01:48.50 | *** join/#htc-linux BHSPitMonkey (~stephen@unaffiliated/bhspitmonkey) |
| 01:49.41 | d3tul3 | if you are breaking fps barriers you probably want one of WisTilt's testing kernels |
| 01:49.56 | jonpry | i read some android document that said the integer division of framerate is preferable. but i think they are high |
| 01:50.07 | jonpry | well i gotta hack the kernel |
| 01:50.41 | jonpry | d3tul3, done with work for the year? |
| 01:50.51 | d3tul3 | almost exams this week |
| 01:51.18 | arrrghhh | jonpry, it doesn't have your magical EGL or GLES tho, FYI |
| 01:51.34 | jonpry | thats fine |
| 01:52.37 | jonpry | i am probably too much of a simpleton to install this |
| 01:52.55 | arrrghhh | this always cracks me up jonpry |
| 01:52.58 | arrrghhh | where are you stuck? |
| 01:53.02 | arrrghhh | do you need the other pieces? :P |
| 01:53.21 | jonpry | probably. i only have 1 piece, and a zImage |
| 01:53.56 | d3tul3 | jonpry novacom :// memboot zImage |
| 01:54.02 | d3tul3 | gotta put it in terms you understand |
| 01:54.05 | jonpry | i can probably dig up a haret. but i have no initrd, startup, or ramdisk |
| 01:54.09 | jonpry | lol |
| 01:55.53 | arrrghhh | jonpry, 1 sec |
| 01:56.48 | jonpry | just format the whole mother vfat? |
| 01:57.21 | arrrghhh | yea, you just need one FAT32 partition |
| 01:57.24 | arrrghhh | as the first partition |
| 01:58.31 | jonpry | is that type 0xb or 0xc? |
| 01:58.59 | arrrghhh | uhhh |
| 01:59.50 | rpierce99 | 0xc just has LBA-mode INT 13 extensions |
| 01:59.56 | rpierce99 | pretends to know what that means |
| 02:00.12 | jonpry | hmm |
| 02:01.08 | arrrghhh | seems like you should use C |
| 02:02.00 | jonpry | [103175.486193] sd 45:0:0:0: [sdc] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB) |
| 02:02.06 | jonpry | but its an 8gb card |
| 02:02.13 | arrrghhh | did you partition it before? |
| 02:02.24 | jonpry | yes |
| 02:02.34 | arrrghhh | well that would be why |
| 02:02.40 | arrrghhh | unless you blew them away |
| 02:02.42 | rpierce99 | B is primary fat32 partition ending cylinder 1023 or lower, C is 1024 or higher |
| 02:02.59 | jonpry | oh i blew it away alright |
| 02:03.42 | jonpry | i think i messed with that number of cylinders stuff |
| 02:04.43 | jonpry | anyone have an 8gb to look at? |
| 02:04.57 | arrrghhh | i have an 8gb card, what do you want..? |
| 02:05.12 | jonpry | output of s h and c commands |
| 02:05.36 | jonpry | i have 62, 122, 277 respectively |
| 02:05.44 | arrrghhh | hrm |
| 02:05.52 | arrrghhh | might be difficult, my linux server is at home... and i am not. |
| 02:06.36 | jonpry | that'll do 'er |
| 02:07.30 | arrrghhh | que? |
| 02:07.40 | arrrghhh | i guess i did bring my lappy today, i forgot |
| 02:08.43 | jonpry | i found another card |
| 02:08.57 | jonpry | 10,81,19165 |
| 02:14.33 | jonpry | dur. still detected as 1GB even with the partition at 8gb in size |
| 02:14.54 | arrrghhh | why not just wipe it and start over? |
| 02:17.16 | *** join/#htc-linux furtardo (~mks@nat/yahoo/x-dhedtkvkiaszpdgp) |
| 02:29.04 | d3tul3 | jonpry, this from my 8gb http://pastebin.com/1ap2NkDe |
| 02:31.46 | arrrghhh | crap, jonpry did you still need those files? |
| 02:33.01 | jonpry | yeah pretty sure i need files |
| 02:33.27 | jonpry | no idea what is wrong with this card, but maybe it will work if i only use the 1gb |
| 02:33.28 | arrrghhh | lol sorry |
| 02:33.50 | arrrghhh | it should work, but that's odd. |
| 02:33.58 | arrrghhh | you should be able to pillage the partition table and start over. |
| 02:33.59 | jonpry | probably goes 8x faster |
| 02:34.02 | arrrghhh | heh |
| 02:34.06 | jonpry | its not a partition problem |
| 02:34.16 | arrrghhh | then i'm really confused |
| 02:34.21 | jonpry | the physical size of the device is being reported incorrectly |
| 02:34.27 | arrrghhh | oO |
| 02:35.33 | arrrghhh | http://dl.dropbox.com/u/12691845/Desktop.zip |
| 02:35.40 | arrrghhh | that has rootfs, haret and initrd |
| 02:35.44 | arrrghhh | hum, did you need a startup? |
| 02:35.56 | jonpry | yes |
| 02:36.16 | d3tul3 | ts calibration probably |
| 02:36.29 | jonpry | i have one of those |
| 02:37.09 | jonpry | so i put all this crap in a folder named android ? |
| 02:37.45 | d3tul3 | root of sd |
| 02:37.56 | jonpry | even the system.ext2? |
| 02:38.02 | d3tul3 | everything |
| 02:38.09 | arrrghhh | you can put it in a folder |
| 02:38.37 | arrrghhh | http://pastebin.com/EgWGNL4p |
| 02:38.43 | arrrghhh | jonpry, remove the rel_path= statement |
| 02:38.49 | rpierce99 | if the folder is called andboot you don't need rel_path |
| 02:39.10 | d3tul3 | folders, silliness |
| 02:40.15 | jonpry | rootfs and initrd are silliness |
| 02:43.13 | jonpry | big patches in 3.1 |
| 02:44.08 | d3tul3 | not as big as "jonpry: assorted android patches" |
| 02:47.16 | d3tul3 | which is code for "generic to rhod kernel in a single commit" |
| 03:00.15 | jonpry | it didn't build in any of the intermediate stages |
| 03:01.14 | jonpry | hmm. linux booted and detected it as 7.7GB |
| 03:01.52 | jonpry | must be that 3.1 sweetness |
| 03:02.49 | d3tul3 | you know it |
| 03:09.24 | jonpry | this is not as fast as frx07 |
| 03:11.07 | *** join/#htc-linux swc|666 (~gecko@unaffiliated/swc666/x-4934821) |
| 03:11.32 | d3tul3 | i think 06+ might be a better performer, but GB is the future |
| 03:11.40 | d3tul3 | it helps if you turn off jit |
| 03:12.31 | jonpry | the bar is not quite as high as i thought. my cm7.1 is nearly this fast |
| 03:13.10 | jonpry | urg. my fps2d is getting 60fps |
| 03:13.30 | d3tul3 | first boot is also an outlier in terms of performance |
| 03:15.39 | jonpry | how am i going to crash a non existent barrier |
| 03:17.33 | d3tul3 | so er this with screen on and the stock 3.1? |
| 03:17.42 | jonpry | yes |
| 03:18.10 | d3tul3 | and that vsync limitation? |
| 03:18.27 | jonpry | yeah no patches |
| 03:18.34 | d3tul3 | did you try neocore |
| 03:18.46 | d3tul3 | i guess the limitation does not come into play there |
| 03:18.52 | jonpry | i don't have the 3d setup yet |
| 03:19.21 | d3tul3 | is this some sort of a patched fps2d or what exactly is different in your setup |
| 03:19.58 | jonpry | i downloaded http://www.4shared.com/file/bTpqavbh/Fps2D_v4.html |
| 03:20.08 | jonpry | yours really does not hit 60 on 3.1? |
| 03:20.25 | d3tul3 | 29 |
| 03:20.32 | d3tul3 | with fps2d from the market |
| 03:20.53 | jonpry | market eh |
| 03:21.06 | jonpry | not sure how i am going to get that |
| 03:21.37 | d3tul3 | let me pull it |
| 03:25.06 | jonpry | think i just crashed the kernel |
| 03:26.15 | d3tul3 | you managed in a few minutes what i haven't been able to do in 24 hrs |
| 03:28.16 | *** join/#htc-linux oliver__ (~oliver@pool-96-234-141-27.bltmmd.east.verizon.net) |
| 03:28.51 | detule | as you said that my kernel crashed on my laptop |
| 03:30.28 | jonpry | i think my sd card spontaneously erased itself |
| 03:30.47 | jonpry | probably switched to a different 1gb |
| 03:41.11 | jonpry | try this on a new card |
| 03:48.23 | detule | new battery on its way |
| 03:49.31 | jonpry | maybe we should decompile these two versions |
| 03:49.49 | *** join/#htc-linux AstainHellbring (AstainHell@unaffiliated/astainhellbring) |
| 03:50.09 | jonpry | definitely 30 on this market one |
| 03:50.58 | detule | apktool? i tried reading the output once....those smali files are confusing |
| 03:52.05 | jonpry | not sure. did it once before |
| 03:52.18 | jonpry | but this thing is so small. its probably like 50 lines of code |
| 03:59.25 | *** join/#htc-linux raymonddull (~raymonddu@c-24-11-68-98.hsd1.mi.comcast.net) |
| 04:01.50 | detule | apktool ftw |
| 04:03.07 | *** join/#htc-linux Blista (~nel@209.59.220.47) |
| 04:06.59 | detule | err the diff between the dissasembled apk is a single line |
| 04:18.17 | jonpry | really |
| 04:19.11 | detule | yes the one that states the name of the apk :) apktool must've failed me or my git diff skillz |
| 04:20.12 | jonpry | that doesn't sound right |
| 04:22.40 | jonpry | scheduling while atomic. fun fun |
| 04:22.58 | detule | eh? |
| 04:23.17 | jonpry | trying to pan update from a workqueue |
| 04:23.29 | detule | can't find anything else different, perhaps apktool is not the right tool for the job |
| 04:24.32 | jonpry | dex2jar ? |
| 04:26.33 | jonpry | looks like this contraption is going to boot. not sure if i managed to thread the required call though |
| 04:29.33 | *** join/#htc-linux ray|yar (~raymonddu@c-24-11-68-98.hsd1.mi.comcast.net) |
| 04:38.39 | jonpry | detule, so i finished this workqueue patch thing. it doesn't break the barrier but something is different about it that may warrant more testing. i got avg 30, sd 3.11 |
| 04:39.18 | detule | on the first fps2d run? |
| 04:39.35 | jonpry | second? |
| 04:41.46 | detule | i find my fps2d runs get better/tighter on successive runs |
| 04:41.52 | jonpry | the launcher seems much smoother to me. but it might be that this is a later boot. also i see some tearing |
| 04:43.02 | detule | 29 w st.d 2.68 |
| 04:43.09 | detule | on my 2nd run |
| 04:43.48 | jonpry | do you see it jumping past 30 sometimes? |
| 04:45.46 | detule | well the running fps flickers over 30 the avg starts at + 30 but goes down to 29 |
| 04:46.20 | *** join/#htc-linux Rob2223 (~Miranda@p5DE4BD2F.dip.t-dialin.net) |
| 04:46.27 | jonpry | yeah the running fps |
| 04:46.38 | jonpry | seems like it hits 60 occasionally |
| 04:47.10 | detule | you can see the bins on the bottom some are way to the right |
| 04:49.40 | jonpry | http://pastebin.com/29GbBEbb if your interested |
| 04:50.50 | detule | oh cool thanks, more things to do at work tomorrow other than work |
| 04:51.56 | jonpry | the tearing only seems to happen when it is going really fast |
| 04:55.41 | jonpry | 29.8 with textureless neocore |
| 04:57.01 | detule | that seems in line |
| 04:57.22 | detule | used to score ~28.5 before the ondemand improvements |
| 04:57.34 | detule | which seem to add an fps or two |
| 04:58.43 | raymonddull | http://dl.dropbox.com/u/14474427/ICS/Screenshot_2011-12-05-23-54-36.png |
| 04:58.47 | raymonddull | be trollin |
| 05:00.12 | jonpry | where's that egl? |
| 05:02.09 | detule | http://android.modaco.com/topic/342526-cyanogenmod-71-rc-released/page__st__200 |
| 05:07.53 | jonpry | pretty sure i created the worst patch ever |
| 05:17.43 | detule | ugh changing that wake_lock to IDLE in htc_battery was useless |
| 05:21.28 | detule | device suspends on a wall-charger |
| 05:21.54 | detule | wake_lock is in a wrong function, unlike 27 and 35 we don't call that notify function |
| 05:26.35 | *** join/#htc-linux WisTilt2 (~wisgreg@wireless248.wirelesstcp.net) |
| 05:27.02 | rpierce99 | hey WisTilt2, the second boot did work with that kernel, but arrrghhh and i both got 24.x fps with it |
| 05:27.35 | WisTilt2 | hmm, guess i need more table fix'n for cdma |
| 05:28.31 | WisTilt2 | your axi is for sure at 192mhz? |
| 05:30.30 | rpierce99 | that's what dmesg said in the table during boot |
| 05:30.42 | rpierce99 | is there a way to check it live? |
| 05:31.54 | WisTilt2 | run quadrant memory only test and what score do you get? |
| 05:32.01 | rpierce99 | can't |
| 05:33.02 | WisTilt2 | oh thats right. run full and get total score then ill make another kernel with axi back at 160 and compare |
| 05:33.04 | *** join/#htc-linux TheXev (~user@243.sub-75-242-136.myvzw.com) |
| 05:33.47 | WisTilt2 | if total as it is ends up mid 400's you're probably at 192 |
| 05:34.10 | rpierce99 | i got 443 the last time i ran it, but i don't remember what kernel that was |
| 05:34.44 | WisTilt2 | yeah that sounds about right. you'll be low 400's at 160 iirc |
| 05:39.23 | *** join/#htc-linux mitsutaka (~mitsutaka@219.143.36.82) |
| 05:40.27 | *** join/#htc-linux mitsutak_ (~mitsutaka@219.143.36.82) |
| 05:41.54 | WisTilt2 | you're still not oc'd correct? |
| 05:42.01 | rpierce99 | nope |
| 05:48.06 | WisTilt2 | run cpu and memory and see what memory goes up to |
| 05:48.47 | WisTilt2 | jonpry you still awake? |
| 05:58.17 | rpierce99 | 24.6 is still a great stock speed neocore though |
| 05:59.20 | WisTilt2 | yeah but im high 29s and cdma should be too |
| 06:00.29 | *** join/#htc-linux mitsutaka (~mitsutaka@219.143.36.82) |
| 06:03.51 | *** join/#htc-linux BHSPitMonkey (~stephen@unaffiliated/bhspitmonkey) |
| 06:12.06 | jonpry | hi WisTilt2 |
| 06:12.59 | WisTilt2 | hey, should we be able to overlay fb on gpu1 with your libGLES in GB or is that just an ics setup? |
| 06:14.08 | jonpry | i think its possible |
| 06:14.34 | jonpry | but the testing you did suggested it was not working right with neocore |
| 06:14.50 | WisTilt2 | i tried it and it kind of works but it flickers with any 3d use. |
| 06:15.22 | jonpry | how many 3d apps did you try? |
| 06:15.33 | WisTilt2 | just neocore and quadrant |
| 06:15.55 | WisTilt2 | everything else looks normal |
| 06:16.26 | jonpry | its just memory until you turn on 3d |
| 06:16.51 | jonpry | i don't have any trouble with it and the hw compositor |
| 06:16.54 | WisTilt2 | its almost like fb isnt aligned in the right place if that makes sense. if it was shifted right another 10-15% it looks like it would be right |
| 06:17.26 | jonpry | ah i am sort of seeing that with this funky msm_fb patch i just did |
| 06:17.37 | rpierce99 | with the oc, mem gets 250 on the nose |
| 06:17.52 | WisTilt2 | just curious and not going to waste time on it. was just thinking we could gain another 2mb with fb over gpu1 |
| 06:18.10 | WisTilt2 | rpierce99 is that with cpu and memory test or just memory |
| 06:18.14 | rpierce99 | both |
| 06:18.54 | WisTilt2 | ok i still have something missing in cdma then. should be around that score with only memory test at that freq |
| 06:19.20 | WisTilt2 | did your total score jump up closer to 500 oc'd? |
| 06:19.22 | rpierce99 | mem only got me a 198 |
| 06:19.37 | WisTilt2 | i think my highest was around 560 total |
| 06:20.12 | WisTilt2 | jonpry what fb patch did you come up with? |
| 06:20.12 | jonpry | WisTilt2, did you see my msmfb workqueue patch? |
| 06:20.18 | WisTilt2 | :) no |
| 06:20.25 | WisTilt2 | where |
| 06:21.01 | jonpry | http://pastebin.com/29GbBEbb |
| 06:21.22 | rpierce99 | holy cow, 539! |
| 06:21.31 | rpierce99 | up above a nexus one |
| 06:21.40 | arrrghhh | heh |
| 06:22.05 | WisTilt2 | looks like you put the whole pan update into a workqueue |
| 06:22.15 | jonpry | yup |
| 06:22.25 | WisTilt2 | did you remove that fake vsync crapola? |
| 06:22.31 | jonpry | no |
| 06:22.50 | WisTilt2 | it gained about .5fps and i really dont see its purpose at all |
| 06:23.26 | jonpry | i think it improves 2d framerate. but doesn't break the limit. and there is some tearing |
| 06:23.43 | jonpry | i think i know what causes that shifting with gpu1 overlap |
| 06:24.04 | WisTilt2 | are you using our panel code? you might need to adjust the tear values i have set |
| 06:24.53 | WisTilt2 | 539 nice rpierce99. axi has to be at 192 to get that high so something is kicking it up a notch under full test i guess |
| 06:25.03 | jonpry | just stock 3.1 with that patch |
| 06:25.07 | WisTilt2 | hi arrrghhh |
| 06:25.20 | arrrghhh | hey WisTilt2 how's it goin |
| 06:25.38 | WisTilt2 | does 3.1 have .39 panel code? |
| 06:26.00 | jonpry | dunno |
| 06:26.03 | jonpry | probably |
| 06:26.26 | jonpry | i think its blitting the back buffer. looks partially drawn to me |
| 06:27.08 | jonpry | this is unfortunate because launcher looks as smooth at froyo if your ignore the artifacts |
| 06:27.14 | WisTilt2 | might comment out the tearing registers i have in panel init and see if it gets worse or better or even changes. then we can calculate the needed values based on your setup |
| 06:27.15 | rpierce99 | mem is 248 on my full run |
| 06:27.22 | rpierce99 | sorry 243 |
| 06:27.59 | arrrghhh | hrm i'm gettin 228 |
| 06:28.00 | WisTilt2 | rpierce99, right in the ballpark where it should be. looks like cpu throttling is still doing something |
| 06:28.01 | arrrghhh | is there a newer kernel? |
| 06:28.16 | rpierce99 | i'm oced to 672 arrrghhh |
| 06:28.22 | arrrghhh | ah, ok |
| 06:28.32 | rpierce99 | and i'm on #23 |
| 06:28.36 | jonpry | i'm missing some kind of theory. afaik there shouldn't be any partial draws caused by this |
| 06:28.45 | arrrghhh | ditto |
| 06:32.21 | WisTilt2 | jonpry that patch looks like it should work well. |
| 06:32.28 | jonpry | also it should be able to break the limit |
| 06:32.45 | jonpry | but instead it causes the backbuffer to be displayed at 30hz. wtf |
| 06:33.22 | WisTilt2 | interesting |
| 06:34.51 | jonpry | must sleep. ttyl |
| 06:35.17 | WisTilt2 | ok me too. im out a couple days on a project. catch you guys later. |
| 06:35.31 | WisTilt2 | arrrghhh gl on that dr test |
| 06:40.07 | arrrghhh | still going... |
| 06:56.08 | *** join/#htc-linux kiozen (~kiozen@p5DDF3C8D.dip.t-dialin.net) |
| 07:27.41 | *** join/#htc-linux ychavan (ychavan@nat/redhat/x-dqhjvwtmihiscwpx) |
| 07:29.33 | *** join/#htc-linux dobrin (~dobrin@85.91.150.26) |
| 07:49.40 | *** join/#htc-linux bukington_ (~bukington@fac34-2-82-228-151-145.fbx.proxad.net) |
| 08:00.58 | *** join/#htc-linux mastermerlin (~Adium@business-188-111-075-094.static.arcor-ip.net) |
| 10:07.55 | *** join/#htc-linux dr1337 (~textual@CPE-120-147-24-40.lflg2.win.bigpond.net.au) |
| 11:05.36 | *** join/#htc-linux lamikr (lamikr@nat/nokia/x-lqusjilmzowgtgic) |
| 11:41.10 | *** join/#htc-linux GNUtoo (~gnutoo@host42-159-dynamic.51-79-r.retail.telecomitalia.it) |
| 11:46.49 | *** join/#htc-linux skodde (~skodde@unaffiliated/skodde) |
| 11:47.47 | *** join/#htc-linux mickeyl (~mickey@openmoko/coreteam/mickey) |
| 12:11.35 | *** join/#htc-linux MethoS- (~clemens@134.102.106.250) |
| 12:39.18 | *** join/#htc-linux rob_w (~bob@ppp-93-104-163-84.dynamic.mnet-online.de) |
| 12:39.18 | *** join/#htc-linux rob_w (~bob@unaffiliated/rob-w/x-1112029) |
| 12:53.16 | *** join/#htc-linux Rob2222 (~Miranda@p4FFF2232.dip.t-dialin.net) |
| 13:02.41 | *** join/#htc-linux dobrin (~dobrin@85.91.150.26) |
| 13:31.59 | *** join/#htc-linux avinashhm (~avinash-h@192.94.92.14) |
| 14:04.15 | *** join/#htc-linux helicopter88 (~helicopte@host177-115-dynamic.18-79-r.retail.telecomitalia.it) |
| 14:04.22 | *** join/#htc-linux rpierce99 (~rpierce99@96-42-102-103.dhcp.stcd.mn.charter.com) |
| 14:17.03 | *** join/#htc-linux kiozen (~kiozen@p5DDF3C8D.dip.t-dialin.net) |
| 14:31.39 | *** join/#htc-linux ali1234 (~ajbuxton@robotfuzz.co.uk) |
| 14:31.39 | *** join/#htc-linux mickeyl (~mickey@openmoko/coreteam/mickey) |
| 14:31.46 | *** join/#htc-linux NeoMatrixJR (~chatzilla@173-20-63-62.client.mchsi.com) |
| 14:42.06 | *** join/#htc-linux rzk (~rzk@95-24-54-101.broadband.corbina.ru) |
| 15:29.46 | *** join/#htc-linux balans21 (~user@82-170-217-205.ip.telfort.nl) |
| 15:33.28 | *** join/#htc-linux furtardo (~mks@nat/yahoo/x-ccywrpxgldjsyews) |
| 15:42.47 | *** join/#htc-linux arif-ali (~arif-ali@ip-81-23-53-226.ask4internet.com) |
| 15:43.19 | *** join/#htc-linux Rob2223 (~Miranda@p4FFF1175.dip.t-dialin.net) |
| 15:58.12 | *** join/#htc-linux AstainHellbring (~AstainHel@unaffiliated/astainhellbring) |
| 15:59.11 | *** join/#htc-linux dobrin (~dobrin@85.91.150.26) |
| 16:43.56 | *** join/#htc-linux detule (~detule@hw-ma-6l13f61.mat.jhu.edu) |
| 17:23.34 | *** join/#htc-linux swc|666 (~gecko@unaffiliated/swc666/x-4934821) |
| 17:42.30 | *** join/#htc-linux kiozen (~kiozen@ppp-88-217-4-253.dynamic.mnet-online.de) |
| 17:45.34 | *** join/#htc-linux kiozen (~kiozen@ppp-88-217-4-253.dynamic.mnet-online.de) |
| 17:45.56 | *** join/#htc-linux helicopter88 (~helicopte@host177-115-dynamic.18-79-r.retail.telecomitalia.it) |
| 17:49.19 | *** join/#htc-linux [acl] (~abel@96.246.167.90) |
| 17:58.08 | *** part/#htc-linux [acl] (~abel@96.246.167.90) |
| 18:02.35 | *** join/#htc-linux kiozen (~kiozen@ppp-88-217-4-253.dynamic.mnet-online.de) |
| 18:08.25 | *** join/#htc-linux InVisibleGoD (~Mario@bl8-107-23.dsl.telepac.pt) |
| 18:09.53 | *** join/#htc-linux furtardo (~mks@nat/yahoo/x-qownuqknofkaiqgl) |
| 18:11.51 | *** join/#htc-linux InVisibleGoD_ (~Mario@bl8-107-23.dsl.telepac.pt) |
| 18:13.33 | *** join/#htc-linux InVisibleGoD (~Mario@bl8-107-23.dsl.telepac.pt) |
| 18:15.12 | *** join/#htc-linux paulk_ (~paulk@lib33-1-82-233-88-171.fbx.proxad.net) |
| 18:25.52 | jonpry | 2+13 :D |
| 18:27.44 | *** join/#htc-linux rajkosto (~rajkosto@2001:470:d76b:da7a:28fa:c7c0:b5e:c1cd) |
| 18:28.55 | jonpry | D/EGL.oem ( 619): smi: offset=10000000, len=00200000, phys=0x100000 |
| 18:28.55 | jonpry | D/EGL.oem ( 619): ebi: offset=00000000, len=00d00000, phys=0x15b00000 |
| 18:28.55 | jonpry | D/EGL.oem ( 619): reg: offset=20000000, len=00100000, phys=0xa0000000 |
| 18:33.07 | *** join/#htc-linux jonpry_ (~jon@c-24-17-200-206.hsd1.wa.comcast.net) |
| 18:45.27 | *** join/#htc-linux GNUtoo (~GNUtoo@host42-159-dynamic.51-79-r.retail.telecomitalia.it) |
| 18:50.10 | *** join/#htc-linux GNUtoo|laptop (~gnutoo@host42-159-dynamic.51-79-r.retail.telecomitalia.it) |
| 18:51.08 | *** join/#htc-linux LordDeath (~LordDeath@cable-81-173-164-253.netcologne.de) |
| 18:57.31 | *** join/#htc-linux kiozen_ (~kiozen@ppp-93-104-74-149.dynamic.mnet-online.de) |
| 19:12.29 | *** join/#htc-linux kiozen (~kiozen@ppp-93-104-74-149.dynamic.mnet-online.de) |
| 19:21.14 | *** join/#htc-linux kiozen_ (~kiozen@ppp-88-217-8-95.dynamic.mnet-online.de) |
| 19:26.24 | *** join/#htc-linux jonpry (~jon@unaffiliated/jonpry) |
| 19:54.23 | *** join/#htc-linux kiozen (~kiozen@ppp-88-217-8-95.dynamic.mnet-online.de) |
| 19:55.02 | *** join/#htc-linux LordDeath_ (~LordDeath@cable-81-173-164-253.netcologne.de) |
| 20:01.25 | detule | jonpry, nicely done |
| 20:01.44 | jonpry | thanks |
| 20:02.21 | jonpry | i didn't try very hard. but it doesn't seem to work well when the total size is > 16mb |
| 20:02.55 | detule | you need a new xdandroid gralloc with a greater allocation size for gpu1? |
| 20:03.25 | jonpry | i think gralloc just grabs the size from pmem |
| 20:03.45 | jonpry | i just patched the blob and changed the kernel |
| 20:05.16 | *** join/#htc-linux NeoMatrixJR (~chatzilla@173-20-63-62.client.mchsi.com) |
| 20:06.46 | detule | i am just thinking of that call in gralloc where it allocates ALLOCATORREGION_RESERVED_SIZE out of hw3d_ebi but i guess that might be immaterial to what the blob is doing |
| 20:07.26 | jonpry | i think that is fine. framebuffer isn't changing size or anything |
| 20:09.09 | detule | oh right, that's the fb |
| 20:10.10 | jonpry | i have my doubts that its really working. like everything i'm testing must use less than 5MB of texture memory or it wouldn't work with the old setup |
| 20:11.16 | detule | it could be that's just listing the pmem allocations not actually using them |
| 20:11.55 | jonpry | something is happening. because either the patch or the pmem change does not work |
| 20:12.25 | jonpry | but it doesn't mean that textures above 5mb won't cause some disaster |
| 20:13.27 | jonpry | in theory there should be some hero/g1 games that don't work on rhod because we have 5.1mb and they have 6.7 or so |
| 20:19.30 | *** join/#htc-linux [acl] (~abel@96.246.167.90) |
| 20:21.04 | [acl] | jonpry: y0 .. |
| 20:21.08 | jonpry | hi |
| 20:21.30 | *** join/#htc-linux balans21 (~user@82-170-217-205.ip.telfort.nl) |
| 20:21.31 | [acl] | jonpry: sup dood.. im curious about your gl improvements .. how goes it ? |
| 20:22.01 | jonpry | can you play sniper vs sniper? |
| 20:22.11 | [acl] | i dont even know what that is |
| 20:22.14 | [acl] | market game ? |
| 20:22.17 | jonpry | yup |
| 20:22.24 | [acl] | i can try when i get home |
| 20:22.30 | jonpry | i found a thread on xda that said it doesn't work |
| 20:22.37 | jonpry | but its working for me |
| 20:22.43 | [acl] | you know xda cant be trusted |
| 20:22.47 | [acl] | :-p |
| 20:23.00 | jonpry | could be my gl fix |
| 20:23.08 | [acl] | well aside from specific games, how is performance other wise |
| 20:23.36 | jonpry | no change. just added texture memory so it should only effect things that need it |
| 20:24.05 | [acl] | ahh ic |
| 20:24.46 | [acl] | all of this butchering the eql ? |
| 20:24.52 | [acl] | *binary lib |
| 20:25.09 | jonpry | need a kernel to match the lib |
| 20:25.26 | [acl] | for memory makes sense |
| 20:25.34 | [acl] | how about android changes ? |
| 20:25.40 | jonpry | none |
| 20:26.05 | jonpry | there is that libegl patch that is required for correct 3d on GB |
| 20:26.43 | jonpry | that was last weeks thing |
| 20:27.31 | [acl] | damn im so behind |
| 20:28.00 | jonpry | i think i talked to you about the fix for 3d |
| 20:28.12 | [acl] | maybe .. but you know how booze kills the brain and stuff |
| 20:28.17 | jonpry | lol |
| 20:28.43 | jonpry | well there is a blob and a new libegl |
| 20:29.05 | [acl] | new blob you say |
| 20:29.08 | [acl] | hmm |
| 20:29.20 | [acl] | i never knew there was an old blob |
| 20:29.22 | jonpry | the libegl is being used as a blob atm. but we have theories as to how to build it from source |
| 20:29.28 | jonpry | libgles_qcom |
| 20:29.38 | [acl] | yeah you said it was modded |
| 20:29.42 | [acl] | who did the mods ? |
| 20:29.48 | jonpry | yours truly |
| 20:29.54 | [acl] | prior to this i mean |
| 20:29.56 | [acl] | the original |
| 20:30.01 | jonpry | bzo i think |
| 20:30.03 | [acl] | hmm |
| 20:30.14 | jonpry | i just pulled it from frx7.1 |
| 20:30.23 | [acl] | ill have to binary diff the blobs and see what i have and dont have |
| 20:30.58 | jonpry | and then i have two new blobs. one w/ texture fix. and another w/ texture fix and 2+13 layout |
| 20:31.06 | [acl] | nice nice |
| 20:31.09 | [acl] | 2+13 |
| 20:31.25 | [acl] | does that help mem alignment at all ? |
| 20:31.41 | jonpry | not really |
| 20:32.17 | jonpry | it almosts wastes 5mb of ram unless something is moved into smi1 |
| 20:32.28 | [acl] | a damn shame |
| 20:33.03 | jonpry | i think we can put a node in there if need be |
| 20:34.16 | jonpry | 13mb will make the compositor much easier |
| 20:34.48 | [acl] | wel we always wanted 2+13 to match winmo but never showed advantages, maybe now we have a reason |
| 20:34.49 | [acl] | lol |
| 20:35.05 | jonpry | so you have made it work before? |
| 20:35.15 | *** join/#htc-linux stroughtonsmith (~steven@86-43-218-187-dynamic.b-ras2.bbh.dublin.eircom.net) |
| 20:35.19 | [acl] | i had 2+13 before but it never helped |
| 20:35.26 | [acl] | so why waste 5mb if there was no improvements |
| 20:35.37 | [acl] | this was back in the froyo days tho.. |
| 20:35.41 | [acl] | GB is a diff animal it seems |
| 20:35.49 | [acl] | and i think you are on the right track |
| 20:36.00 | jonpry | i think it fixed sniper vs sniper |
| 20:36.54 | [acl] | ill download it tonight |
| 20:36.57 | rpierce99 | i cant find the free version |
| 20:37.17 | jonpry | http://search.4shared.com/postDownload/-42BpWH4/Sniper_Vs_Sniper_Online_v117.html |
| 20:37.26 | rpierce99 | lol |
| 20:37.48 | [acl] | damn |
| 20:38.11 | jonpry | 3.1 kernel works pretty good though |
| 20:38.26 | *** join/#htc-linux balans21 (~user@82-170-217-205.ip.telfort.nl) |
| 20:40.50 | [acl] | so how the hd2 guys get hardware acceleration done ? looks like ics is moving by for em |
| 20:41.40 | jonpry | hax |
| 20:41.47 | [acl] | i expected nothing less |
| 20:41.49 | [acl] | lol |
| 20:44.58 | *** join/#htc-linux mgross029 (c0234f46@gateway/web/freenode/ip.192.35.79.70) |
| 20:45.50 | [acl] | it pains me to see people call the HD2 SLOW |
| 20:51.17 | rpierce99 | works fine here, so maybe it was that first patch, not the 2+13 patch that fixed it |
| 20:52.46 | [acl] | damn.. not keeping track of the patches |
| 20:58.46 | jonpry | there has to be some game that doesn't work |
| 21:03.15 | *** join/#htc-linux rob_w (~bob@ppp-93-104-163-84.dynamic.mnet-online.de) |
| 21:03.15 | *** join/#htc-linux rob_w (~bob@unaffiliated/rob-w/x-1112029) |
| 21:23.06 | detule | jonpry, break 3.1 yet? |
| 22:00.52 | jonpry | detule, i've had it hang a couple of times now |
| 22:01.21 | jonpry | i blame it on usb |
| 22:02.03 | jonpry | also i get no sound with this contraption |
| 22:03.03 | detule | you got .csv files? |
| 22:03.25 | jonpry | probably not. just whatever arrrghhh gave me |
| 22:10.24 | detule | try those, though high likelihood of them being uneffective -> you probably need them from rhod210 |
| 22:10.38 | detule | root of sd |
| 22:13.16 | detule | i think any usb related hangs you may have are related to me changing that wake_lock in _battery to IDLE....need to change that back to SUSPEND |
| 22:16.34 | *** join/#htc-linux Echo31 (~olivier@lan31-9-88-177-158-48.fbx.proxad.net) |
| 22:21.13 | detule | oh jonpry , can't kexec in 3.1, not sure what the deal is, probably some config option , noticed there's something about parameters being passed from bootloader in msm_defconfig that i haven't seen before |
| 22:22.35 | jonpry | just totally fails? |
| 22:22.59 | detule | yeah just hangs |
| 22:23.18 | jonpry | get anything on the screen? |
| 22:23.46 | detule | using the built in menu option in GB -> i can see the sd card getting unmounted but then it just spins its wheels |
| 22:24.08 | detule | haven't looked into it much but need to get that going |
| 22:25.16 | jonpry | probably should check ramconsole in haret |
| 22:25.38 | jonpry | i don't see this option your talking about |
| 22:25.52 | detule | you don't have kexec in shutdown menu? |
| 22:26.07 | jonpry | kernel config option |
| 22:26.48 | detule | CONFIG_CMDLINE_FROM_BOOTLOADER=y |
| 22:27.24 | jonpry | that should be ok |
| 22:29.30 | jonpry | its not unusual for kexec to be totally broken |
| 22:30.07 | jonpry | they probably brought in some patches in hopes of making it work on cortex a9 and broke it for everything |
| 22:31.02 | detule | i mean when you enabled it in .39 it was just a config option right? |
| 22:32.43 | jonpry | +CONFIG_KEXEC=y |
| 22:32.44 | jonpry | +CONFIG_ATAGS_PROC=y |
| 22:36.15 | detule | i see one kexec.c patch in 3.1 that's not in 3.0.9 |
| 22:36.24 | detule | but perhaps it's elsewhere |
| 22:38.04 | jonpry | its built into hotplug and mmu primarily |
| 22:38.29 | jonpry | there are platform hooks. like platform_cpu_kill |
| 22:39.45 | jonpry | mmu stuff is the worst. like create_identity_mapping. but really we need to find out where its crashing |
| 22:42.12 | detule | you know what's the startup.txt wording for ramconsole |
| 22:42.31 | arrrghhh | detule, emwe had that on a TOPA thread, 1 sec |
| 22:42.39 | jonpry | must launch haret without a startup.txt |
| 22:42.47 | jonpry | then telnet into phone on port 9999 |
| 22:42.49 | rpierce99 | haha i just deleted that yesterday |
| 22:42.51 | arrrghhh | or you can do that |
| 22:43.02 | detule | whoa i thought there was an easier way |
| 22:43.35 | jonpry | probably can put it in a startup.txt |
| 22:43.47 | jonpry | dump foo.txt 0x8e0000 0x20000 |
| 22:43.56 | jonpry | that might be totally wrong |
| 22:44.07 | rpierce99 | apt what is ramconsole |
| 22:44.07 | apt | well, ramconsole is pwf dm 0x8e0000 0x20000 |
| 22:44.25 | jonpry | lol. yeah pwf |
| 22:44.26 | rpierce99 | "dm" in that is the file name |
| 22:45.23 | detule | slick use of apt |
| 22:45.44 | arrrghhh | about the only good use of apt |
| 22:45.47 | arrrghhh | apt kill detule |
| 22:45.47 | apt | ACTION shoots a excited neutrino gun at detule |
| 22:45.58 | rpierce99 | that dm file ends up in the same folder where haret was launched from |
| 22:46.35 | arrrghhh | detule, http://forum.xda-developers.com/showthread.php?p=9357431&highlight=ramconsole#post9357431 |
| 22:46.40 | arrrghhh | that's sir michael's directions. |
| 22:46.59 | detule | thanks arrrghhh rpierce99 |
| 22:47.02 | [acl] | fawk.. what does a guy have to do to get a "sir" in front of his name ? |
| 22:47.02 | arrrghhh | np |
| 22:47.09 | arrrghhh | [acl], be a foreigner |
| 22:47.12 | [acl] | ahh |
| 22:47.15 | arrrghhh | :D |
| 22:47.19 | [acl] | no love for US folk |
| 22:47.42 | arrrghhh | can't be knighted here |
| 22:47.48 | arrrghhh | although i guess that doesn't really apply to germany either |
| 22:47.49 | arrrghhh | oh well. |
| 22:47.57 | [acl] | its all good |
| 22:48.02 | [acl] | we will come up with our own i suppose |
| 22:48.44 | arrrghhh | ladyboy [acl] ? |
| 22:49.34 | [acl] | huh |
| 22:50.55 | [acl] | damn .. someone is hogging up the couch. cant take my pre going home nap |
| 22:52.42 | jonpry | need to get this compositor going |
| 22:53.02 | [acl] | do it up yo |
| 22:54.02 | jonpry | its only missing one small piece, but i can't quite figure it out |
| 22:54.28 | [acl] | you said the same thing about sound.. and look at us now.. i can play music any time i want. |
| 22:54.40 | [acl] | so bottom line is i have faith |
| 22:54.42 | [acl] | :-) |
| 22:54.51 | jonpry | this is simpler |
| 22:55.04 | jonpry | just need hammer |
| 22:55.08 | [acl] | so tie one hand behind your back and make it a challenge |
| 22:55.13 | [acl] | :-p |
| 22:58.37 | [acl] | too late to take a nap now |
| 22:58.40 | [acl] | :-( |
| 22:58.43 | [acl] | i gotta head home |
| 22:58.52 | [acl] | aite fellas. ill ttyls |
| 23:04.38 | detule | [ 175.487792] [RR] send control message cmd=6 srv.cmd=6 prog=00000001:d01389a0 id=-735538328:d451ba98 |
| 23:04.38 | detule | [ 177.084320] md: stopping all md devices. |
| 23:04.38 | detule | [ 178.087951] Starting new kernel |
| 23:04.38 | detule | [ 178.088043] Bye! |
| 23:04.47 | detule | so polite |
| 23:04.55 | Willd | Aww, kexec? :) |
| 23:05.59 | detule | that's all i got jonpry |
| 23:06.28 | jonpry | well thats pretty good. iirc the Bye! is printed very very late |
| 23:06.56 | arrrghhh | it is polite |
| 23:07.44 | detule | here's the a bit more complete print out http://pastebin.com/PcSMNgz5 |
| 23:10.00 | jonpry | you could maybe put some code to make sure that the entry point is kind of where we like it, and there appears to be a kernel at that location |
| 23:10.40 | jonpry | the atags could be no good |
| 23:12.26 | *** join/#htc-linux surge (surge@pool-72-88-82-28.bflony.fios.verizon.net) |
| 23:13.29 | jonpry | even 13mb is not enough |
| 23:52.02 | jonpry | it shows signs of life |
| 23:52.11 | jonpry | but shortage of memory |
| 23:54.42 | arrrghhh | sounds like me |
