| 00:00.20 | jonpry | that could be a good idea i guess. maybe even better than saving money by buying a winmo phone and porting android to it |
| 00:01.11 | *** join/#htc-linux Neo31 (~Neo31@unaffiliated/neo31) |
| 00:07.50 | *** join/#htc-linux LSnake (be35d3dc@gateway/web/freenode/ip.190.53.211.220) |
| 00:08.08 | psycho_ | is there a program like d-feet for android... im trying to write up a driver for this broadcom bluetooth stack and need to snoop around a bit |
| 00:13.02 | *** join/#htc-linux edein (~ede@ool-44c4f27e.dyn.optonline.net) |
| 00:13.39 | jonpry | psycho_: you can't use d-feet? |
| 00:14.12 | psycho_ | I think I may have answered my own question... |
| 00:14.41 | psycho_ | im new to the debugger but it looks like the console is what i want |
| 00:15.12 | jonpry | trying to make HID work? |
| 00:15.35 | psycho_ | i will settle for just a l2cap socket at this point |
| 00:15.46 | psycho_ | but yes, I would like to get hid working |
| 00:17.16 | jonpry | gingerbread is supposed to have a new bluetooth api |
| 00:17.34 | xUmaRix | why i always get E/TelephonyProvider( 1589): Failed setting numeric '50219' to the current operator |
| 00:17.45 | xUmaRix | i got blank carrier |
| 00:19.25 | psycho_ | jonpry: any idea when gingerbread is coming out |
| 00:21.22 | jonpry | no. what phone are you working on? |
| 00:23.26 | psycho_ | i have an evo im working on right now |
| 00:23.57 | psycho_ | i would already be done if I didnt have this proprietary bluetooth stack, or at least close to done |
| 00:25.05 | jonpry | ah. if you get it to work, i know someone who would buy your code |
| 00:26.25 | psycho_ | thanks for the offer. I will probably just toss it out as a free app |
| 00:27.08 | psycho_ | depends on how much money i have to put into getting this to work i suppose |
| 00:28.21 | jonpry | what about cm6? |
| 00:28.54 | psycho_ | cm6 is a great project, i had it on my phone for like a whole hour... couldnt get my gps to work |
| 00:29.24 | psycho_ | not to mention im shooting for non root code |
| 00:29.29 | psycho_ | so everyone can enjoy it |
| 00:30.18 | psycho_ | its just too bad htc and broadcom use this proprietary code and dont give us any documentation |
| 00:30.25 | jonpry | you can't replace the bluetooth stack with non root code, no? |
| 00:30.58 | psycho_ | no, I would have to call the bluetooth stack currently as it |
| 00:31.00 | psycho_ | as is* |
| 00:32.36 | jonpry | i didn't look at it for very long, but i couldn't see how that would be possible |
| 00:33.05 | psycho_ | im assuming the code uses an IPC of some sort |
| 00:33.15 | psycho_ | if thats the case I should be able to tap into it |
| 00:33.28 | psycho_ | its being done by a company |
| 00:33.32 | psycho_ | they have a beta |
| 00:34.09 | jonpry | so talk to hci over dbus? |
| 00:34.21 | psycho_ | right |
| 00:34.41 | psycho_ | although im not even sure that stack uses HCI as it is supposed to be implemented |
| 00:34.54 | psycho_ | its like a bluez/hci hack job |
| 00:39.10 | psycho_ | com.broadcom.bt.app appears to be the name |
| 00:39.27 | psycho_ | only if I could get dbus-monitor working |
| 00:39.28 | *** join/#htc-linux BazGee (~bazgraham@cpc1-sund2-0-0-cust716.11-1.cable.virginmedia.com) |
| 00:39.42 | jonpry | don't you just link with bluez and go to town? |
| 00:39.51 | psycho_ | i did that |
| 00:40.05 | psycho_ | i had working code on a linux bluez stack |
| 00:40.29 | psycho_ | move same exact code to the android and the broadcom stack ignored it |
| 00:41.18 | psycho_ | im sure the code would work well on native bluez for android |
| 00:41.22 | *** join/#htc-linux Microang (522deb64@gateway/web/freenode/ip.82.45.235.100) |
| 00:41.34 | Microang | apt seen mattc |
| 00:41.51 | apt | mattc <~mattc@75.142.172.16> was last seen on IRC in channel #htc-linux, 4d 8h 54m 17s ago, saying: 'And a SUPER BRIGHT flash :)'. |
| 00:42.20 | *** part/#htc-linux Microang (522deb64@gateway/web/freenode/ip.82.45.235.100) |
| 00:42.25 | jonpry | psycho_: this is some custom broadcom bluez? |
| 00:48.15 | psycho_ | yeah its a custom bluetooth stack for broadcom chips |
| 00:49.07 | jonpry | looks like they released the bluez source, but it has disappeared |
| 00:49.27 | psycho_ | i have it i think |
| 00:50.52 | psycho_ | i guess I should have looked at it a little closer |
| 00:51.02 | psycho_ | there is actually broadcom code in there |
| 00:55.40 | *** join/#htc-linux BazGee (~bazgraham@cpc1-sund2-0-0-cust716.11-1.cable.virginmedia.com) |
| 00:57.58 | *** join/#htc-linux JTuck (JTuck@173-31-155-7.client.mchsi.com) |
| 00:58.43 | dcordes | jonpry: j/k |
| 00:59.43 | *** join/#htc-linux dieselboy (~dieselboy@dsl-69-172-104-216.acanac.net) |
| 00:59.56 | jonpry | lol |
| 01:00.06 | jonpry | does your phone freeze too? |
| 01:02.59 | xUmaRix | http://v.youku.com/v_show/id_XMTk5NjExMjYw.html |
| 01:03.27 | xUmaRix | ios on g2 |
| 01:04.18 | jonpry | i was just wondering about that |
| 01:05.35 | jonpry | can't be real |
| 01:05.41 | dcordes | XDAndroid & HTC-Linux MSM Android Port. |
| 01:05.59 | dcordes | culinary |
| 01:06.01 | *** join/#htc-linux beeboobeeboo (~non@c-71-59-128-10.hsd1.wa.comcast.net) |
| 01:13.18 | *** join/#htc-linux karnqu (~jakealmer@24-247-179-103.dhcp.aldl.mi.charter.com) |
| 01:15.01 | *** join/#htc-linux BazGee (~bazgraham@cpc1-sund2-0-0-cust716.11-1.cable.virginmedia.com) |
| 01:23.50 | *** join/#htc-linux nineX_ (~nunya@75-132-13-29.dhcp.stls.mo.charter.com) |
| 01:36.43 | *** join/#htc-linux mastermerlin1 (~Adium@p4FEE55D5.dip.t-dialin.net) |
| 01:38.16 | *** join/#htc-linux BinaryDroid (4c7ced7f@gateway/web/freenode/ip.76.124.237.127) |
| 01:48.04 | *** join/#htc-linux [acl] (~abel@cpe-69-203-141-229.si.res.rr.com) |
| 01:48.08 | *** join/#htc-linux manusfreedom_ (~manusfree@tra78-1-82-235-115-79.fbx.proxad.net) |
| 01:48.29 | [acl] | jonpry: whats goody |
| 01:48.43 | jonpry | hey |
| 01:49.26 | jonpry | just getting started on the adc/a1010 problem again. i was going to look at ddi.dll earlier, but i couldn't find a good one |
| 01:49.50 | [acl] | ahh |
| 01:50.04 | [acl] | i havent even tested sound |
| 01:50.08 | jonpry | :-) |
| 01:50.09 | [acl] | i should get on that |
| 01:50.17 | jonpry | i downloaded blazn earlier |
| 01:50.24 | [acl] | lol |
| 01:53.20 | *** join/#htc-linux Akustik84 (~volodin_d@95-24-255-112.broadband.corbina.ru) |
| 01:55.43 | [acl] | topaz shakedown was a failure |
| 01:56.41 | jonpry | too bad. |
| 01:56.57 | jonpry | i got a fair bit of donations though |
| 01:57.18 | [acl] | thats good |
| 01:57.23 | jonpry | and with rum the price it is. the party could basically never end |
| 01:57.35 | [acl] | lol |
| 01:59.52 | [acl] | jonpry: were u the one who disasembled the amss ?or was it cotulla? |
| 02:00.10 | *** join/#htc-linux BazGee (~bazgraham@cpc1-sund2-0-0-cust716.11-1.cable.virginmedia.com) |
| 02:02.03 | jonpry | i tried part of it. couldn't find anything though. i think cmonex has done it |
| 02:02.33 | [acl] | i wouldnt mind taking a quick peek.. where can i get the data? |
| 02:03.40 | *** join/#htc-linux Tinyboom (~nahh@c91FD653E.dhcp.bluecom.no) |
| 02:04.25 | jonpry | thats tough |
| 02:05.04 | jonpry | you have to get a radio nbh. then there is some tool that decompresses it or something. then another that can remove sections. well sort of anyways |
| 02:05.20 | [acl] | dang |
| 02:05.34 | [acl] | wozzer prob have it all |
| 02:05.49 | jonpry | the nbh can have like 10 sections. one of which is radio, and it can extract it into a bin. but this doesn't get you very far. because radio is actually sectioned up to |
| 02:06.23 | *** join/#htc-linux BinaryDroid_ (4c7ced7f@gateway/web/freenode/ip.76.124.237.127) |
| 02:06.29 | jonpry | that is the interesting part. like it is possible to remove just amss from a radio. but i never could get that to work |
| 02:06.35 | [acl] | so its 1 giant file? not like a mountable file system? |
| 02:07.14 | jonpry | its sort of like cramfs or something |
| 02:08.22 | jonpry | but reversing it is kind of difficult. you have to figure all the peripherals looks different from a9 |
| 02:08.44 | [acl] | oo i just got lazy reading all that |
| 02:09.59 | jonpry | :p |
| 02:11.12 | jonpry | [acl]. can hw3d work from rhobuntu? |
| 02:14.30 | [acl] | jonpry: no idea how rhobontu works.. but if it can or did i m sure phh woulda know about it by now |
| 02:15.17 | dcordes | jonpry: no |
| 02:16.02 | jonpry | doesn't work like there is no opengl x server, or doesn't work like i can't even load the driver? |
| 02:17.03 | dcordes | no opengl x server |
| 02:17.21 | jonpry | what about the one for codeaurora? |
| 02:17.26 | dcordes | xf86-video-msm |
| 02:17.53 | dcordes | it assumes fb driver used on the QSD devices |
| 02:18.05 | dcordes | which is a show stopper for msm7kA |
| 02:18.26 | dcordes | you can patch it though |
| 02:18.31 | jonpry | can't be hacked? |
| 02:18.31 | dcordes | but it won't give you 3d |
| 02:18.48 | dcordes | I am looking forward for a chromeos device |
| 02:18.59 | jonpry | why no 3d? |
| 02:19.06 | dcordes | read the code |
| 02:19.16 | jonpry | bleh |
| 02:19.26 | dcordes | https://www.codeaurora.org/gitweb/quic/xwin/?p=xf86-video-msm.git |
| 02:20.45 | jonpry | thanks, that will take some time to absorb |
| 02:21.03 | dcordes | wtf searay ? |
| 02:21.43 | jonpry | neon_memcopy sounds promising |
| 02:22.21 | dcordes | not for an msm7kA devices because it does not understand NEON instructions.- |
| 02:22.36 | jonpry | j/k |
| 02:24.03 | *** join/#htc-linux Jack-E (~chatzilla@host86-151-253-11.range86-151.btcentralplus.com) |
| 02:25.59 | *** join/#htc-linux g55 (~g55@rgnb-5d87c172.pool.mediaWays.net) |
| 02:27.45 | *** join/#htc-linux BazGee (~bazgraham@cpc1-sund2-0-0-cust716.11-1.cable.virginmedia.com) |
| 02:33.51 | jonpry | [acl], think there might not be anything wrong with our a1010 code |
| 02:39.09 | [acl] | theories? |
| 02:40.39 | jonpry | a1010 stops responding at random points. i'm thinking microp isn't thread safe |
| 02:40.50 | jonpry | or i2c |
| 02:46.17 | *** join/#htc-linux rov120 (4a41b51b@gateway/web/freenode/ip.74.65.181.27) |
| 02:47.05 | *** join/#htc-linux xman (443f727c@gateway/web/freenode/ip.68.63.114.124) |
| 02:47.47 | jonpry | there is indeed no mutex in i2c-msm |
| 02:48.05 | *** join/#htc-linux NeoMatrixJR_Mobi (~NeoMatrix@70-14-24-218.pools.spcsdns.net) |
| 02:48.24 | [acl] | jonpry: ahh.. |
| 02:51.59 | *** join/#htc-linux Jack-E (~chatzilla@host86-151-253-11.range86-151.btcentralplus.com) |
| 02:52.27 | *** join/#htc-linux Jack-E (~chatzilla@host86-151-253-11.range86-151.btcentralplus.com) |
| 02:54.09 | jonpry | i guess spinlock should work though |
| 02:55.49 | *** join/#htc-linux JTuck (JTuck@173-31-155-7.client.mchsi.com) |
| 02:56.36 | xman | hey i was wondering if anyone could answer this for me i just put the new updated android on tp2 but i have no network why. |
| 02:58.36 | *** join/#htc-linux JB_ (47abf1ef@gateway/web/freenode/ip.71.171.241.239) |
| 03:06.42 | *** join/#htc-linux JTuck (~Joe@173-31-155-7.client.mchsi.com) |
| 03:08.57 | jonpry | [acl]. you want to take a look at something? |
| 03:09.02 | jonpry | i am confused |
| 03:09.38 | [acl] | sure.. |
| 03:10.43 | jonpry | i2c-msm.c |
| 03:11.04 | jonpry | msm_i2c_xfer() |
| 03:12.03 | [acl] | where is this file again |
| 03:12.13 | jonpry | drivers/i2c/busses |
| 03:13.57 | jonpry | so the first thing is that it calls poll_not_busy() without acquiring the lock. and poll_not_busy, doesn't use a lock |
| 03:15.21 | jonpry | however, i poll throws a bunch of messages if it actually detects a busy bus. and i haven't seen those |
| 03:15.28 | [acl] | hmm |
| 03:15.51 | jonpry | then at 344: it gets the lock. loads up some structure |
| 03:16.22 | jonpry | but at 359 releases it in order to start spinning for completion |
| 03:16.48 | jonpry | afacit this means that if another thread comes barging in. it can overwrite the command buffer just fine, because the lock is free |
| 03:17.58 | [acl] | yeah |
| 03:18.12 | jonpry | am i hallucinating? or is this really that broken? |
| 03:18.18 | [acl] | but just some comparison of this code to other kernel.. looks like its normal |
| 03:18.53 | jonpry | or not. i was trying to port the .29 drivers in. they are oh so different. completely rewritten |
| 03:18.56 | [acl] | there are some changes .. might interest you |
| 03:19.05 | [acl] | jonpry: not really |
| 03:19.08 | [acl] | very similar |
| 03:19.10 | [acl] | just a few lines |
| 03:19.20 | [acl] | but no locks on that call |
| 03:20.17 | jonpry | i think it is unusual to have to transfer 10kb over i2c after microp is up and blasting the bus for touch sensor |
| 03:22.25 | jonpry | you have this new code somewhere? |
| 03:23.04 | [acl] | just checkin our random ca code.. plus some hero code |
| 03:23.26 | [acl] | that msm_i2c_xfer looks like it hasnt changed |
| 03:23.57 | jonpry | but it can't work right? |
| 03:24.32 | *** join/#htc-linux gpc (user@220-142-15-130.dynamic.hinet.net) |
| 03:24.55 | [acl] | i see your point |
| 03:58.18 | *** join/#htc-linux apt (ibot@rikers.org) |
| 03:58.18 | *** topic/#htc-linux is Welcome to the HTC Linux project! || Website and wiki http://htc-linux.org || Channel logs at http://irclog.netripper.com/?chan=htc-linux || Kernel mailing list: http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/mobile-linux-discuss || This channel primarily serves development purposes - Please join #htc-linux-chat for offtopic and discussion about builds |
| 04:09.08 | *** join/#htc-linux programmer8922 (~Evan@67.219.166.182) |
| 04:13.36 | jonpry | [acl]. any odds on how informative printk is about threads? |
| 04:14.15 | jonpry | seems to have booted |
| 04:17.12 | [acl] | well wanted to see if you can print a start and end on the function. this way if you see 2 starts back to bak.. you have a thread whcih didnt end and another one that begun |
| 04:19.56 | jonpry | yeah, but say you have: printk(running foo, %x); foo(x); and run that from multiple threads. isn't there some chance you get the printk's in a different order than the foo's were run? |
| 04:20.57 | jonpry | argh, dmesg isn't big enough to see it |
| 04:21.17 | [acl] | hmm.. yeah you will need to print some unique id for each thread somehow.. this way you know which thread it is |
| 04:22.04 | Refuge | anyone else having key mapping issues with the new kernal and zimage? |
| 04:28.00 | jonpry | [acl]: maybe this is why winmo is using bitbanging. |
| 04:28.32 | [acl] | i wouldnt be surprised |
| 04:29.03 | [acl] | i dunno how the hell video is working for me if i have hw3d enabled.. it shouldnt be able to blit properly |
| 04:29.26 | jonpry | why? |
| 04:30.09 | [acl] | when hw3d is enabled.. the put_img calls hw3d version of the call .. and none of that should work |
| 04:30.28 | jonpry | maybe it does work |
| 04:30.33 | [acl] | interrupts 0 |
| 04:31.11 | [acl] | might be a safety to call software incase hw poops out |
| 04:31.27 | jonpry | or maybe hw3d isn't really enabled |
| 04:32.06 | [acl] | it is.. as soon as u build with it.. the calls are there #if defined(CONFIG_MSM_HW3D) |
| 04:33.39 | jonpry | so, if i use blazn, and select force hw3d. it has the shared lib and whole deal? |
| 04:34.01 | [acl] | no clue.. i dunno how that sets stuff up |
| 04:34.37 | [acl] | as long as permissions are set on /dev/hw3d* properly it should be enabled |
| 04:34.56 | jonpry | i don't understand how to get a system where i can test hw3d |
| 04:35.41 | [acl] | i think our make config already has it enabled.. so just check the permissions on /dev for the hw3d and if they are 666, you are good to go |
| 04:39.45 | jonpry | i still don't get it. obviously i can't use rhobuntu and just have a /dev/ entry |
| 04:40.01 | jonpry | hmm. so printk is not being informative |
| 04:40.20 | jonpry | it doesn't list anything for microp-ksc or microp-klt. how is that possible? |
| 04:44.05 | *** join/#htc-linux Indeed3 (187e789e@gateway/web/freenode/ip.24.126.120.158) |
| 04:52.20 | [acl] | jonpry: i dunno.. printks for me save the day.. |
| 04:56.21 | jonpry | i got some printk's |
| 04:56.34 | jonpry | threads do not appear to be the problem |
| 04:59.31 | jonpry | we've been getting more complaints in here than usual |
| 05:00.38 | [acl] | complaints? |
| 05:00.57 | [acl] | bout blazin? |
| 05:01.13 | jonpry | no sound, won't boot. etc |
| 05:02.05 | [acl] | really.. first i heard of this. where are these complains? |
| 05:02.46 | *** join/#htc-linux Timber (~Tim@86.56.42.159) |
| 05:03.18 | jonpry | " can someone plz help i will donate" hey i was wondering if anyone could answer this for me i just put the new updated android on tp2 but i have no network why. |
| 05:03.24 | jonpry | and the guy about the keymap |
| 05:03.35 | [acl] | ahh |
| 05:04.15 | [acl] | network as in wifi? who knows need details |
| 05:05.25 | [acl] | hard to help people with out logs |
| 05:06.04 | jonpry | i'm not sure they are real problems. maybe there is just a flood of people trying android again on there phones |
| 05:06.38 | [acl] | i did notice alot of people trying to upgrade on their own.. so i bet the effed up somewhere |
| 05:08.42 | [acl] | lol |
| 05:08.55 | [acl] | some funny ass posts on ppcg |
| 05:09.51 | [acl] | MMS bounty |
| 05:10.36 | *** join/#htc-linux guest_ (48406f70@gateway/web/freenode/ip.72.64.111.112) |
| 05:12.50 | [acl] | jonpry: im confused as to why we stil dont need to set mem to adsp CALC_PMEM(pmem_adsp, pmem, 0); |
| 05:15.23 | jonpry | cause pmem is a program for giving addresses to userland drivers |
| 05:16.08 | [acl] | ahh ok.. u told me .. now i remember |
| 05:17.32 | *** join/#htc-linux LakersEB (ad1ace4e@gateway/web/freenode/ip.173.26.206.78) |
| 05:18.33 | jonpry | i'm going to try gpio i2c again. last attempt was miserable |
| 05:18.59 | [acl] | ima be up all night testing.. so knock urself out |
| 05:19.25 | jonpry | i would like to start working on 3d soon. but i just don't get what you are testing or how |
| 05:20.37 | [acl] | well im not working on 3d at the moment.. tracing down the mdp + 3d relation ship. |
| 05:28.42 | *** join/#htc-linux Maylay|Sphyynx (~gren@adsl-9-201-88.mia.bellsouth.net) |
| 05:28.48 | *** join/#htc-linux redgar (18884af8@gateway/web/freenode/ip.24.136.74.248) |
| 05:28.52 | jonpry | it dies using i2c-gpio. and i know that no other thread can possibly get a hold of the bus |
| 05:29.07 | jonpry | but it does get further???? |
| 05:32.32 | [acl] | need more printk.. possibly some bugons |
| 05:35.08 | jonpry | it does get further, but i don't know why |
| 05:35.31 | [acl] | do a bugon and trace it down.. |
| 05:40.55 | *** join/#htc-linux crack (~chatzilla@202.70.51.108) |
| 05:41.42 | jonpry | a1010 crashes. |
| 05:42.33 | [acl] | ahh |
| 05:43.51 | [acl] | interesting post i just saw on xda. i didnt know voice search worked only after a call |
| 05:50.13 | *** join/#htc-linux Pohket (~Pohket@207-172-112-247.c3-0.rdl-ubr2.trpr-rdl.pa.cable.rcn.com) |
| 05:51.31 | *** join/#htc-linux Maylay|Sphyynx (~gren@adsl-9-201-88.mia.bellsouth.net) |
| 06:00.39 | jonpry | [acl]. that is audience in action |
| 06:00.55 | *** join/#htc-linux jonpryisgay (d0365e43@gateway/web/freenode/ip.208.54.94.67) |
| 06:01.08 | jonpryisgay | hey jonpry |
| 06:01.11 | jonpryisgay | your gay |
| 06:01.13 | jonpry | someone is over compensating |
| 06:01.18 | [acl] | lol |
| 06:02.06 | [acl] | now that ur famous.. you also got haters |
| 06:02.16 | *** join/#htc-linux oneoldman (d0365e43@gateway/web/freenode/ip.208.54.94.67) |
| 06:02.41 | oneoldman | anybody here can help me with my rhodium, im looking for jonpry or als |
| 06:02.56 | [acl] | jonpry is hiding |
| 06:03.07 | [acl] | and i dunno where als is |
| 06:03.16 | jonpry | lol |
| 06:03.20 | oneoldman | i meant you @ acl |
| 06:03.48 | [acl] | well i can already tell whats ur issue |
| 06:03.52 | [acl] | ur too old |
| 06:03.54 | [acl] | :-p |
| 06:04.01 | [acl] | android for young people |
| 06:04.10 | jonpry | isn't this jonpryisgay with a new name? |
| 06:04.17 | Pohket | Do we need to get off his lawn? |
| 06:04.20 | [acl] | ohh shit |
| 06:04.24 | [acl] | ur rite |
| 06:04.35 | [acl] | jonpry u have one killer fanbase |
| 06:04.39 | *** join/#htc-linux mayohead (~ethan@c-71-59-128-10.hsd1.wa.comcast.net) |
| 06:04.53 | [acl] | Pohket: sup man.. came to fix something else ? |
| 06:04.55 | [acl] | lol |
| 06:05.19 | Pohket | Just seeing how things are developing |
| 06:05.48 | jonpry | man i'm stuck |
| 06:05.52 | *** join/#htc-linux SVic (~SVic@ip128.117.dars-ip.ru) |
| 06:06.11 | *** join/#htc-linux jonpryrocks (d0365e43@gateway/web/freenode/ip.208.54.94.67) |
| 06:06.14 | Pohket | Just about to get adb installed and run through some android logs |
| 06:06.22 | jonpry | thats more like it |
| 06:06.33 | jonpryrocks | plz help me |
| 06:06.42 | jonpryrocks | i didnt mean harm |
| 06:06.44 | jonpryrocks | just some humor |
| 06:07.06 | [acl] | just ask already |
| 06:07.10 | jonpry | i don't know if you get the message when you enter the channel. afair, it says "don't ask to ask" |
| 06:08.07 | jonpryrocks | my rhodium running xandroid immediately ends calls i make |
| 06:08.11 | jonpryrocks | im on tmobile btw |
| 06:08.14 | Pohket | I think part of the reason we're seeing that stupid 'device 256 != 11' is because Android's audioflinger lib is probably sending through a 'NEEDS_MUTE_ENABLED' flag on the device... at least from my preliminary search that seems to be the case |
| 06:09.07 | [acl] | jonpry: speaking of i2c.. how are you handling clocks for that? or does the current code work fine for you |
| 06:09.45 | jonpry | jonpryrocks: have you tried the usual route of downloading a new cab and making a fresh install? and maybe trying a new sd card? or a different build? |
| 06:10.10 | jonpryrocks | yea, but i thought i was the only one with the problem |
| 06:10.32 | jonpryrocks | rebooting works tempoarily but is a pain |
| 06:10.56 | *** join/#htc-linux Refuge (~none@ppp-99-14-99-97.dsl.ipltin.sbcglobal.net) |
| 06:11.15 | [acl] | havent heard of that issue so far.. from anyone |
| 06:11.27 | jonpry | Pohket, that sound like an interesting flag. do you know the circumstances when it happens? |
| 06:11.34 | Pohket | Right on boot |
| 06:11.36 | jonpryrocks | i think its because im on tmobile |
| 06:11.40 | Pohket | and any time it mutes speaker |
| 06:11.44 | Pohket | just before a call |
| 06:11.54 | [acl] | jonpryrocks: doubt it .. post on xda and see what u get.. |
| 06:11.54 | jonpryrocks | as soon as the call is placed it flashes red and drops the call |
| 06:11.56 | Pohket | I think it's muting streams |
| 06:12.57 | Refuge | lol |
| 06:12.58 | Refuge | Topic is 'My software never has bugs. It just develops random features |
| 06:13.18 | jonpry | argh. anything we do with that would be tricky. need to make sure it works on all phones, in all kinds of cases. or else we get more jonpryrocks |
| 06:13.57 | Pohket | Understood |
| 06:13.59 | Refuge | i'm having a issue with the new kernal key mapping is not working |
| 06:14.07 | jonpry | jonpryrocks: i have a 210. not tmobile anymore because i moved out of the states |
| 06:14.41 | jonpryrocks | can you place calls on the new 8/26 build flawlessly everytime without fail |
| 06:14.46 | [acl] | Refuge: tried reinstall ? or different build? |
| 06:14.56 | Refuge | yes |
| 06:15.04 | Refuge | i've seen this problem over and over on xda |
| 06:15.05 | Refuge | as well |
| 06:15.09 | [acl] | Refuge: no one else reported this? |
| 06:15.13 | [acl] | ahh |
| 06:15.15 | [acl] | really |
| 06:15.17 | Refuge | yep |
| 06:15.25 | [acl] | Refuge: what keys changed ? |
| 06:15.26 | Refuge | the buttons are not working |
| 06:15.33 | Refuge | it did'nt change |
| 06:15.35 | [acl] | at all? |
| 06:15.36 | Refuge | it's just not working |
| 06:15.38 | Refuge | nope |
| 06:15.56 | [acl] | Refuge: is there a pattern? we didnt touch any button crap.. |
| 06:15.56 | jonpry | and if you install an 8/25 build does it work? |
| 06:16.46 | jonpry | same for you jonpryrocks? |
| 06:16.55 | Refuge | http://forum.xda-developers.com/showthread.php?t=767296 |
| 06:16.59 | Refuge | see |
| 06:17.16 | *** join/#htc-linux Andreyxxl[HD2EU] (~Andreyxxl@89.32.146.153) |
| 06:17.57 | Refuge | i tried it on shrubcraft |
| 06:18.00 | Refuge | and mattc build |
| 06:18.05 | jonpry | Pohket, we should probably make a new branch that deals with mute. then later phh will pull it and have to deal. have you tried any code for it? |
| 06:18.05 | [acl] | Refuge: tried xdandroid straight with the new kernel ? |
| 06:18.14 | Refuge | no |
| 06:18.22 | Pohket | Not yet - just a theory |
| 06:18.32 | Refuge | not yet |
| 06:18.34 | [acl] | Refuge: try it out.. if it does work we blame the those builders |
| 06:18.34 | [acl] | :-p |
| 06:18.38 | Pohket | Might also look into incall volume |
| 06:18.41 | Refuge | haha |
| 06:18.43 | Pohket | It's all somewhat linked =) |
| 06:18.48 | Refuge | where can i find xdroid |
| 06:18.53 | Refuge | xda? |
| 06:19.03 | [acl] | http://xdandroid.com/wiki/Main_Page |
| 06:19.09 | Refuge | ty |
| 06:19.17 | Refuge | is it updated or do i need to push the kernal |
| 06:19.20 | Refuge | and zimage |
| 06:19.27 | jonpry | Pohket we have code for changing the power amp volume. but it doesn't do anything to headset |
| 06:19.31 | [acl] | its raw.. comes with nothing. you need to put the kernel in |
| 06:19.43 | Refuge | k |
| 06:19.44 | Pohket | I understand |
| 06:19.50 | Refuge | ty act |
| 06:19.52 | Refuge | acl |
| 06:19.55 | Pohket | And we can't tell when we're in a call or not? |
| 06:20.00 | [acl] | Refuge: also wi[e your data.img.. |
| 06:21.04 | jonpry | pohket, we know when are not in call, but not necessarily when we are |
| 06:21.57 | jonpry | i however, don't have calls. so it seems kind of silly |
| 06:22.13 | Pohket | Well, I narrowed it down to the audioflinger because it's the only item with the 'ApmCommandThread' that the error relates to |
| 06:22.17 | Refuge | ok |
| 06:22.31 | jonpry | i got alsa on rhobuntu :-) |
| 06:22.44 | Pohket | I saw that in the logs - grats! |
| 06:22.58 | jonpry | you try rhobuntu yet? |
| 06:23.42 | Pohket | No, not yet |
| 06:24.18 | *** join/#htc-linux PsiCoLeO (~leomal14@69.146.216.201.dsl.intelnet.net.gt) |
| 06:24.59 | jonpry | thats too bad |
| 06:27.17 | *** join/#htc-linux sourcow (4b24925d@gateway/web/freenode/ip.75.36.146.93) |
| 06:28.56 | jonpry | i'm thinking we need a vreg for a1010. like it gets powered up through the intrinsic diodes on the bus. but when we actually boot it up, that doesn't last long |
| 06:29.06 | *** join/#htc-linux rzk (~rzk@daemonet.ru) |
| 06:29.40 | jonpry | [acl] you know how to, or have compared vregs on nand/wince? |
| 06:30.10 | [acl] | nope.. never have.. im not sure how wince even handles that |
| 06:31.05 | jonpry | er, nm. doesn't work on haret boot |
| 06:33.57 | jonpry | [acl] i am not doing anything with clocks |
| 06:34.26 | [acl] | jonpry: its ok.. i2c looks like one that is simple |
| 06:34.33 | *** join/#htc-linux rzk (~rzk@daemonet.ru) |
| 06:34.35 | jonpry | its possible that a1010 needs one. what about a pcm clock? |
| 06:34.49 | [acl] | nope right now we dont touch it |
| 06:35.23 | jonpry | you should touch it. that is probably why audio out doesn't work. i don't think a1010 should be in the way of that |
| 06:35.23 | [acl] | may need to printk to see if calls are being made for it right now one one has cared for the othe clocks |
| 06:41.56 | jonpry | meh. i give up. 3am is quiting time |
| 06:42.49 | [acl] | jonpry: aite dood.. later |
| 06:42.56 | jonpry | we should get wistilt2 to tell audience he needs to check out there products |
| 06:42.59 | *** join/#htc-linux rzk (~rzk@daemonet.ru) |
| 06:43.02 | jonpry | i tried that and they didn't respond |
| 06:43.14 | [acl] | jonpry: ahh.. lol.. interesting |
| 06:48.14 | *** join/#htc-linux MacDrunk (~marper@201.164.159.144) |
| 07:00.03 | *** join/#htc-linux Dough291 (~Damien@ARennes-352-1-32-107.w83-195.abo.wanadoo.fr) |
| 07:04.24 | *** join/#htc-linux shu8i (~shu8i@78.104.102.78) |
| 07:05.25 | *** join/#htc-linux rzk (~rzk@daemonet.ru) |
| 07:05.56 | *** join/#htc-linux cbde (~bepe@p54992662.dip0.t-ipconnect.de) |
| 07:06.51 | *** join/#htc-linux adioph (7432e344@gateway/web/freenode/ip.116.50.227.68) |
| 07:08.12 | shu8i | ~seen elbartome |
| 07:08.13 | apt | elbartome <~a@ip-109-90-64-144.unitymediagroup.de> was last seen on IRC in channel #htc-linux, 5d 12h 6m 26s ago, saying: 'mattc: very good'. |
| 07:08.35 | *** join/#htc-linux goxboxlive (~jrs@106.84-48-184.nextgentel.com) |
| 07:13.29 | *** join/#htc-linux notjake (~jake@ppp121-44-225-239.lns20.syd7.internode.on.net) |
| 07:13.42 | notjake | Hey guys, Is there an updated page on the status of openmoko on g1 ? |
| 07:23.35 | *** join/#htc-linux fakker (~noobhands@cpc4-hitc6-2-0-cust82.9-2.cable.virginmedia.com) |
| 07:44.40 | *** join/#htc-linux MikeBanks (~michael@c-174-56-198-233.hsd1.ga.comcast.net) |
| 07:57.59 | *** join/#htc-linux Markinus (~Miranda@gtng-4db043db.pool.mediaWays.net) |
| 07:59.26 | *** join/#htc-linux cbde (~bepe@p54992662.dip0.t-ipconnect.de) |
| 08:04.30 | *** join/#htc-linux cbde (~bepe@p54992662.dip0.t-ipconnect.de) |
| 08:05.47 | *** join/#htc-linux kalemas (~kalemas@ns2.openhardware.ru) |
| 08:08.41 | *** join/#htc-linux tiltwho (18c7562f@gateway/web/freenode/ip.24.199.86.47) |
| 08:08.57 | tiltwho | anyone here? |
| 08:09.47 | tiltwho | ? |
| 08:13.55 | *** join/#htc-linux leobaillard (~leobailla@ip-37.net-82-216-190.caen.rev.numericable.fr) |
| 08:15.33 | *** join/#htc-linux biidigenie2 (~biidigeni@5ED40E9B.cable.ziggo.nl) |
| 08:16.23 | *** join/#htc-linux cbde (~bepe@p54992662.dip0.t-ipconnect.de) |
| 08:16.41 | *** part/#htc-linux cbde (~bepe@p54992662.dip0.t-ipconnect.de) |
| 08:19.34 | *** join/#htc-linux Sjuust (~jmeij@ip3e839a58.speed.planet.nl) |
| 08:39.07 | *** join/#htc-linux Hunterkll (~Hunterkll@m2a2336d0.tmodns.net) |
| 08:39.12 | Hunterkll | lol |
| 08:39.41 | Hunterkll | after scandisk hd2 is best android phone i've ever used |
| 08:40.02 | fakker | what card ya get? |
| 08:41.42 | *** join/#htc-linux emwe (~mweirauch@86.56.8.104) |
| 08:42.46 | *** join/#htc-linux Vito_| (~Sysel@gw.loccal.net) |
| 08:45.58 | Hunterkll | default 16g class 2 |
| 08:47.05 | Hunterkll | you really dont need faster |
| 08:47.08 | *** part/#htc-linux Pohket (~Pohket@207-172-112-247.c3-0.rdl-ubr2.trpr-rdl.pa.cable.rcn.com) |
| 08:50.39 | Hunterkll | i am a few kernel revs out of date tho lol |
| 08:51.00 | Hunterkll | and people running benchmarks multiple times are stupid |
| 08:51.02 | *** join/#htc-linux kvaster (~kvaster@vpn-e0.bas-net.by) |
| 08:51.39 | Hunterkll | the score improves because of code caching.. not the device getting 'warmed up' |
| 08:59.05 | *** join/#htc-linux Sjuust (~jmeij@ip3e839a58.speed.planet.nl) |
| 09:11.47 | *** join/#htc-linux Sjuust (~jmeij@ip3e839a58.speed.planet.nl) |
| 09:14.41 | fakker | if you rub the phone, it runs faster too Hunterkll |
| 09:16.15 | *** join/#htc-linux LordDeath (~LordDeath@cable-81-173-164-38.netcologne.de) |
| 09:26.24 | *** join/#htc-linux adioph (7432e344@gateway/web/freenode/ip.116.50.227.68) |
| 09:33.35 | *** join/#htc-linux McWest (53fcbe93@gateway/web/freenode/ip.83.252.190.147) |
| 09:33.51 | McWest | Hello |
| 09:35.23 | phh | everything is done by night for me on TP2 :'( |
| 09:35.57 | *** join/#htc-linux byrnsey88 (4cfcb2e7@gateway/web/freenode/ip.76.252.178.231) |
| 09:36.07 | *** part/#htc-linux McWest (53fcbe93@gateway/web/freenode/ip.83.252.190.147) |
| 09:36.39 | Hunterkll | fakker htc genie app? |
| 09:39.47 | *** join/#htc-linux |Jeroen| (~jeroen@94-224-23-216.access.telenet.be) |
| 09:40.03 | fakker | yeah |
| 09:40.06 | phh | [acl]: *or* you can dump radio RAM, that's way easier :p |
| 09:41.49 | *** join/#htc-linux rob__ (561a6daa@gateway/web/freenode/ip.86.26.109.170) |
| 09:42.03 | rob__ | hellooo! |
| 09:42.10 | [acl] | phh: dump radio ram .. instead of trying that crazyness jonpry talked about huh. I think wozzer did all of this anyways |
| 09:42.20 | phh | [acl]: I did. |
| 09:42.26 | phh | (thanks to cr2 :p) |
| 09:42.31 | emwe | phh, hi. hw3d is not supposed to work for topa, no? At least screen stays black here. |
| 09:42.38 | [acl] | ahh cr2.. he is missed.. |
| 09:42.43 | phh | emwe: yup |
| 09:43.01 | emwe | phh, does it work for rhod? what's the reason for failure on topa? |
| 09:43.08 | phh | emwe: not on rhod |
| 09:43.09 | [acl] | emwe: you should fix it :-) |
| 09:43.14 | phh | [acl]: :D |
| 09:44.07 | phh | <[acl]> when hw3d is enabled.. the put_img calls hw3d version of the call .. and none of that should work <-- lol ? |
| 09:44.07 | emwe | phh, can it be that it's explicitely disabled for rhod/topa in pmem? think i recall sth like that. |
| 09:44.18 | phh | emwe: mmeeeeeh ? |
| 09:44.30 | phh | there is a force_hw3d=1 parameter |
| 09:44.34 | phh | but that's it |
| 09:44.35 | phh | theorically. |
| 09:44.41 | emwe | ok, then that doesn't work ;) |
| 09:44.59 | emwe | with that param it's forced to be anabled i assume from your reaction ;) |
| 09:45.05 | emwe | then it doesn't work with that. will test. |
| 09:45.58 | emwe | btw, i think i find a solution for memory die detection. just will have to let people test. +0x081C00 SKUID PCBA PN[0] << is different. |
| 09:46.07 | phh | <[acl]> jonpry: im confused as to why we stil dont need to set mem to adsp CALC_PMEM(pmem_adsp, pmem, 0);< ---- because your video isn't hardware :p |
| 09:46.38 | [acl] | phh: lol.. well i didnt know why adsp needs ram or doesnt |
| 09:46.59 | phh | [acl]: well, by default it only has 256kB of its own memory |
| 09:47.03 | phh | it's hard to do anything there :D |
| 09:47.09 | phh | for video |
| 09:47.43 | [acl] | nahh video was another weird issue.. get_img was failing randomly didnt know where it got effed up |
| 09:47.50 | *** join/#htc-linux NujaWay (~R2D2@chy94-2-82-226-71-148.fbx.proxad.net) |
| 09:48.32 | phh | <Pohket> I think part of the reason we're seeing that stupid 'device 256 != 11' is because Android's audioflinger lib is probably sending through a 'NEEDS_MUTE_ENABLED' flag on the device... at least from my preliminary search that seems to be the case <---- on android, DEVICE_CURRENT is 1, but for us it's not. |
| 09:51.44 | phh | [acl]: because it goes to ashmem and we can't blit from ashmem ? |
| 09:53.12 | phh | http://v.youku.com/v_show/id_XMTk5NjExMjYw.html wtf. |
| 09:54.31 | [acl] | no clue.. its sporadic. but i do know the calls to the hw3d are being made.. |
| 09:54.33 | [acl] | wtf |
| 09:54.40 | [acl] | tranlate ? |
| 09:55.48 | [acl] | why would anyone wanna run ios is beyond me.. |
| 09:56.12 | phh | [acl]: wait. |
| 09:56.16 | phh | the calls to hw3d are normal -_-' |
| 09:56.19 | phh | but fails |
| 09:56.25 | phh | see the code |
| 09:56.44 | phh | <PROTECTED> |
| 09:56.44 | phh | <PROTECTED> |
| 09:56.44 | phh | #if defined(CONFIG_MSM_HW3D) |
| 09:56.44 | phh | <PROTECTED> |
| 09:56.46 | phh | <PROTECTED> |
| 09:56.48 | phh | <PROTECTED> |
| 09:56.54 | phh | that's the code of framebuffer's get_img |
| 09:57.04 | phh | so it just tries everything it can think of :p |
| 09:57.13 | [acl] | yeah i put some extra prinks in there. saw it go nuts |
| 09:57.36 | phh | if you print major id of the file |
| 09:57.39 | phh | you'll see it's ashmem |
| 09:57.44 | phh | well major+minor |
| 09:57.56 | shu8i | ~seen cass |
| 09:58.03 | apt | cass <~Cass@nat/sun/x-cxiewcikcwsoxnmu> was last seen on IRC in channel #htc-linux, 20h 17m 23s ago, saying: 'hey gauner1986'. |
| 09:58.03 | phh | then you can look at gralloc code |
| 09:58.15 | phh | gralloc goes to ashmem if there is no special requirement |
| 09:58.36 | phh | [acl]: the fix is to use hardware decoding anyway |
| 09:59.28 | [acl] | thats down the road ..lol.. finishing clocks for nand version .. |
| 10:00.45 | [acl] | its using rpc to enable and disable grp |
| 10:01.31 | emwe | phh, is it a known issue that sometimes the radio loses (phone) connection and one can't be called anymore? data seems still to work iirc correctly from my observations. |
| 10:01.49 | emwe | phh, happens after the device has been sleeping for a while. |
| 10:01.59 | phh | emwe: not really but well. |
| 10:02.02 | phh | emwe: perhaps the rild crashed ? |
| 10:02.14 | phh | [acl]: what about other clocks ? |
| 10:02.24 | emwe | phh, that would be visible in dmesg or logcat? or in both? |
| 10:02.35 | *** join/#htc-linux Hunterkll (~Hunterkll@m2a2336d0.tmodns.net) |
| 10:03.02 | phh | logcat and logcat -b radio |
| 10:03.36 | emwe | thx |
| 10:04.12 | emwe | btw, how does one efficiently get the log tailed on your computer during the device runs? |
| 10:04.26 | emwe | it's a pita with adb shell dmesg repeated forevery. |
| 10:04.32 | emwe | s/forevery/forever |
| 10:04.49 | phh | cat /proc/kmsg |
| 10:05.03 | emwe | ah ok. |
| 10:05.15 | phh | (but I'm stupid so i still always do while true;do dmesg -c;done -_-') |
| 10:06.07 | emwe | would be handy to have some dmesg2logcat facility, then i could conveniently watch logcat in eclipse+adt ;) |
| 10:06.46 | phh | shouold be doable but hum |
| 10:07.03 | emwe | didn't search for such a thing, yet. |
| 10:07.48 | [acl] | wtf is mms and why is there a bounty for it ? |
| 10:08.00 | *** join/#htc-linux Blizzzard (5e067a08@gateway/web/freenode/ip.94.6.122.8) |
| 10:08.12 | phh | lol |
| 10:08.17 | phh | multimedia message or something |
| 10:08.22 | phh | basically, paid emails |
| 10:08.29 | phh | but associated with the phone number |
| 10:08.51 | [acl] | so i guess we dont have this working huh |
| 10:09.26 | phh | too bad uh ? :D |
| 10:09.39 | [acl] | its only $30 |
| 10:09.52 | [acl] | lets wait till it gets to at least 100 |
| 10:09.53 | [acl] | :-p |
| 10:10.19 | phh | [acl]: and we might have an easy fix for that :D |
| 10:10.31 | phh | well.... easy as it has already been done for HD2. |
| 10:10.46 | [acl] | so ur onboard.. 100 bucks it is |
| 10:10.47 | [acl] | lol |
| 10:11.10 | emwe | phh, hm. some commit after sound-enabled freezes and auto-resets topa when changing volume (probably when just playing a sound). |
| 10:11.25 | phh | freeze ? |
| 10:11.26 | phh | hum |
| 10:11.36 | phh | and freeze and auto reset |
| 10:11.37 | phh | ok |
| 10:11.39 | phh | so A9 died |
| 10:11.40 | emwe | yap. some people reported this already. |
| 10:11.54 | emwe | dunno what change might cause this, though. |
| 10:12.04 | phh | sound itself ? -_-' |
| 10:12.21 | phh | [acl]: how much for camera ? |
| 10:12.48 | [acl] | no one asking for it |
| 10:12.53 | phh | bah. |
| 10:14.27 | [acl] | vfe/vdc and grp enable rpc calls work.. nice nice |
| 10:14.43 | [acl] | didnt fix a damn thing tho :-\ |
| 10:14.48 | phh | you know vfe/vdc are already done in my camera branch ? :D |
| 10:15.51 | phh | (just saying) |
| 10:16.17 | [acl] | yeah .. but rpc .. now thats the lazy mans dream |
| 10:16.38 | phh | :D |
| 10:20.30 | emwe | phh, hm, sound-freeze must be the headset_plugged() call in audio_enable() because every *_rhod() function is guarded for rhod-only. just disabled your audio_ouput.c changes and it doesn't freeze+autoreset anymore. |
| 10:21.16 | phh | emwe: wwwoooooops |
| 10:21.18 | [acl] | phh: actually the camera clocks are almost there... but some of the ns_onlys are off |
| 10:22.04 | *** join/#htc-linux Alex[sp3dev] (~alex_dfr@86.110.163.19) |
| 10:23.20 | [acl] | phh: should update them and put it on the main branch.. |
| 10:24.12 | Alex[sp3dev] | hey [acl] |
| 10:24.28 | Alex[sp3dev] | ever ran your device in turbo mode? |
| 10:24.31 | *** join/#htc-linux hyperfire21 (62df0fbe@gateway/web/freenode/ip.98.223.15.190) |
| 10:24.35 | phh | Alex[sp3dev]: our devices ARE turbo :p |
| 10:24.38 | [acl] | Alex[sp3dev]: nope.. |
| 10:24.47 | [acl] | damn.. turbo |
| 10:25.11 | emwe | phh, for "real" turbo, one would have to elevate ebi1_clk from 128mhz to 160mhz instead of pll-adjustments, phh, no? ;) |
| 10:25.15 | Alex[sp3dev] | phh: what about diam? i'm getting weird display corruption on turbo. probably need to adjust clocks |
| 10:25.28 | phh | emwe: we still haven't found how to do that :D |
| 10:25.37 | phh | emwe: but we know ebi1 derivates from pll |
| 10:25.38 | phh | so .... :D |
| 10:25.42 | emwe | yah, i trial-and-errored-that for some time... |
| 10:25.45 | emwe | lol |
| 10:26.01 | phh | Alex[sp3dev]: yeah, you overclock your memory |
| 10:26.14 | phh | from 128 to 160mhz as emwe said :p |
| 10:26.17 | emwe | i meant tried to find out how ebi1_clks value is stored and retrieved... |
| 10:28.02 | Alex[sp3dev] | actually i'm thinking of dual-boot nand and cleaning up xdandroid a bit because mmcqd is causing very high load |
| 10:28.21 | phh | dual boot ? wimo/android ? android/ubuntu ? |
| 10:28.27 | Alex[sp3dev] | winmo/android |
| 10:28.31 | phh | bah :( |
| 10:28.37 | phh | I want dual boot ubuntu/android |
| 10:28.39 | Hunterkll | Can we resize xip? |
| 10:28.46 | Alex[sp3dev] | ubuntu/android is easy |
| 10:28.48 | phh | (android being just for tests) |
| 10:28.52 | phh | Alex[sp3dev]: I know |
| 10:28.55 | phh | but I'm too lazy to do it :p |
| 10:28.58 | Alex[sp3dev] | just do pivot_root at start)) |
| 10:29.09 | phh | no |
| 10:29.17 | phh | change just initrd.gz to know which file to loopback mount |
| 10:29.41 | [acl] | what sdc2 again? |
| 10:29.52 | phh | ask wiki ? :p |
| 10:29.54 | Alex[sp3dev] | Hunterkll: what about xip? naturally you can set any size that fits to both ram and rom |
| 10:30.17 | phh | [acl]: sd card or nothing |
| 10:30.19 | phh | depending on the device |
| 10:30.31 | phh | emwe: couldn't your freeze problem be because you don't have headset stuff ? |
| 10:30.39 | [acl] | phh: only clock not obeying me .. rest match 100% to wince |
| 10:32.04 | Alex[sp3dev] | also i think i need to look into microp-ksc driver. it seems to me it has a very little repeat timeout which causes symbols to appear many times.. needs a more accurate debouncing |
| 10:34.46 | *** join/#htc-linux Jack-E (~chatzilla@host86-153-182-168.range86-153.btcentralplus.com) |
| 10:35.04 | emwe | phh, right. it's disabled. thx. will look into it then. |
| 10:35.31 | phh | emwe: a proper fix for that, is to make something clean like mmc.c for headset, for every board :D |
| 10:35.40 | phh | I mean one file for all |
| 10:35.52 | phh | (I'm fed up of those 60lines in every board file) |
| 10:35.59 | emwe | so that one doesn't have to duplicate that stuff over and over again, yeah. |
| 10:36.00 | phh | (but if you're lazy and just want to do that, I'll accept it too ...) |
| 10:36.07 | emwe | perhaps codeaurora did that already? ;) |
| 10:36.11 | phh | emwe: well, I think topaz is the last board without it :D |
| 10:36.14 | phh | emwe: not that i'm aware of |
| 10:36.24 | phh | see pmem stuff |
| 10:36.33 | phh | i'm the only guy on qualcomm devices who did common stuff for pmem -_-' |
| 10:36.38 | phh | same for mmc |
| 10:36.43 | phh | I still don't get why but well |
| 10:36.50 | emwe | phh, as i am apparently the last topaz dev, it's quite time intense to watch on all frontiers at the same time ;) |
| 10:37.14 | emwe | (for topaz i mean) ;) |
| 10:37.49 | [acl] | nice .. crashing while 3d.. this is progress |
| 10:38.21 | [acl] | emwe: last of your kind ? jeez.. must get lonely |
| 10:38.23 | Alex[sp3dev] | got irq? |
| 10:38.36 | *** join/#htc-linux GNUtoo|htcdream (~GNUtoo@80.10.46.46) |
| 10:38.38 | [acl] | Alex[sp3dev]: couldnt tell .. crashes when 3d is called |
| 10:38.46 | [acl] | need to look into it |
| 10:38.46 | emwe | [acl], no, i do have a gf :P |
| 10:39.08 | Alex[sp3dev] | a girl-developing-for-topaz? |
| 10:39.20 | [acl] | topaz chick woa |
| 10:39.24 | Hunterkll | alex. linux and winmo in same xip |
| 10:40.29 | Alex[sp3dev] | Hunterkll: probably that's the way to go. like, you run a loop and check some gpio (power key) to tell what user selects and then just jump to the desired address.. though there are some other values except addresses in xip header which may cause epic fail |
| 10:40.50 | emwe | Alex[sp3dev], lol no. but a htc tattoo user at least. ;) |
| 10:40.54 | Hunterkll | put winmo kernel first :) |
| 10:41.35 | Alex[sp3dev] | that might be a good idea. winmo kernels have some empty space and a branch at the start, so we can reuse that |
| 10:42.26 | Hunterkll | both oses on nand too.....! |
| 10:42.57 | Hunterkll | mwuahaha 1gb hd2 :p |
| 10:43.08 | Alex[sp3dev] | nope, 512mb kovsky.. |
| 10:43.41 | Jack-E | i was wondering about modifying the CE kernel |
| 10:43.55 | Jack-E | seems more logical than developing a whole new boot loader |
| 10:44.09 | Alex[sp3dev] | basically the idea is to avoid ce for as long as possible |
| 10:44.15 | Alex[sp3dev] | i wonder if we can kexec it |
| 10:44.51 | Hunterkll | lol |
| 10:48.49 | *** join/#htc-linux johnb81 (~john@78.161.20.60) |
| 11:44.12 | *** join/#htc-linux apt (~apt@rikers.org) |
| 11:44.12 | *** topic/#htc-linux is Welcome to the HTC Linux project! || Website and wiki http://htc-linux.org || Channel logs at http://irclog.netripper.com/?chan=htc-linux || Kernel mailing list: http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/mobile-linux-discuss || This channel primarily serves development purposes - Please join #htc-linux-chat for offtopic and discussion about builds |
| 11:44.20 | Alex[sp3dev] | i want a smartbook that'd have a dual-core qualcomm armv7, wsxga+ screen and the thinkpad look. lol |
| 11:44.29 | phh | XD |
| 11:44.46 | phh | Alex[sp3dev]: I'd rather take the tegra dual core though. |
| 11:45.00 | GNUtoo|laptop | leviathan, with computer usb cable it works |
| 11:45.02 | phh | not like qualcomm doesn't know how to do a 3D engine but well. |
| 11:45.10 | GNUtoo|laptop | leviathan, I think my new phone would be a palm pre |
| 11:45.21 | GNUtoo|laptop | and nexusone too |
| 11:45.21 | Alex[sp3dev] | or rather a hexacore core i7?) |
| 11:45.30 | phh | Alex[sp3dev]: na. |
| 11:45.35 | GNUtoo|laptop | leviathan, do you follow linux-wireless |
| 11:45.36 | GNUtoo|laptop | ? |
| 11:45.38 | phh | Alex[sp3dev]: way less funny |
| 11:45.47 | GNUtoo|laptop | someone ported compat-wireless to 2.6.24!!!!!!!!!!!!!!! |
| 11:46.12 | Alex[sp3dev] | GNUtoo: is that someone playing with old pxa devices? |
| 11:46.22 | GNUtoo|laptop | I don't know |
| 11:46.26 | *** join/#htc-linux Bry8Star_ (~Bry8Star@cpe-76-170-247-232.socal.res.rr.com) |
| 11:46.27 | GNUtoo|laptop | but palm pre has 2.6.24 |
| 11:46.32 | Alex[sp3dev] | O_o |
| 11:46.43 | phh | that sucks |
| 11:46.56 | phh | you'll need to update that a bit :p |
| 11:47.05 | Hunterkll | lol |
| 11:47.07 | Alex[sp3dev] | but why palm pre after all? if i were to buy a phone, i'd choose n900 or milestone |
| 11:47.21 | phh | yeah milestone here too |
| 11:47.43 | phh | Alex[sp3dev]: perhaps omap are too well supported for GNUtoo|laptop :D |
| 11:47.48 | *** join/#htc-linux Andreyxxl[HD2EU] (~Andreyxxl@89.32.146.153) |
| 11:48.31 | ali1234 | there's no open driver for calls on n900 yet |
| 11:48.49 | phh | a ril is no big deal to write. |
| 11:48.55 | ali1234 | they have a RIL |
| 11:49.00 | ali1234 | it's the usual audio routing problems |
| 11:49.14 | ali1234 | they are getting close though |
| 11:49.19 | phh | lol ? |
| 11:49.23 | phh | on qualcomm that's damn easy |
| 11:49.45 | *** join/#htc-linux spanner3003 (~spanner30@5e0da3ae.bb.sky.com) |
| 11:49.46 | Alex[sp3dev] | actually it's all because alsa kind of sucks. they still have not made a standard way to manage different routing profiles |
| 11:49.54 | phh | ah right |
| 11:49.56 | ali1234 | yeah... that's why it only happened in the last two days right? ;) |
| 11:50.05 | phh | ali1234: audio routing always worked |
| 11:50.26 | GNUtoo|laptop | lol |
| 11:50.36 | phh | the problem was "just" to generate sound from A11. |
| 11:50.43 | GNUtoo|laptop | that's why I'll get a nexusone too |
| 11:51.33 | ali1234 | oh. i thought the problem was "in call sound" |
| 11:51.40 | Alex[sp3dev] | what are you guys thinking about using shr on 64 mb ram and qvga? |
| 11:53.12 | *** join/#htc-linux eugenb (~no@dslb-188-100-188-249.pools.arcor-ip.net) |
| 11:53.30 | GNUtoo|laptop | n900 has some issues |
| 11:53.35 | GNUtoo|laptop | such as: |
| 11:53.37 | GNUtoo|laptop | *no GPS |
| 11:53.51 | GNUtoo|laptop | *no floss modem activator |
| 11:54.00 | GNUtoo|laptop | else if there was a floss modem activator |
| 11:54.07 | GNUtoo|laptop | I whould have choosen the n900 |
| 11:54.09 | phh | just write it ? :D |
| 11:54.12 | GNUtoo|laptop | it was so much better |
| 11:54.22 | GNUtoo|laptop | hmmm, I'm not a reverse-engineer |
| 11:54.31 | phh | right |
| 11:54.38 | phh | everything is to be learnt. |
| 11:54.51 | GNUtoo|laptop | but in another hand.... |
| 11:54.56 | GNUtoo|laptop | the kernel sources are there |
| 11:55.04 | GNUtoo|laptop | so maybe some printk here and there? |
| 11:55.14 | GNUtoo|laptop | or doesn't it work like this? |
| 11:55.19 | phh | well I've no clue what this looks like |
| 11:55.36 | GNUtoo|laptop | btw about palm pre, nobody tried wifi yet |
| 11:55.36 | phh | but yeah, most likely some well placed printks should help a lot to debug this |
| 11:55.38 | ali1234 | GNUtoo|laptop: actually N900 has a partially working ofono driver now - i think it's only been working for a couple of days tho |
| 11:55.50 | Alex[sp3dev] | at least n900 has a decent X11 distro out of the box. basically that's what we've been working on for the last couple of years |
| 11:56.07 | GNUtoo|laptop | ali1234, someone should had commited the modem activator, was it commited? |
| 11:56.41 | ali1234 | GNUtoo|laptop: the video of it working in nitdroid was on engadget yesterday - i didn't look for the code yet, i need to buy a microsd card to install it |
| 11:57.05 | GNUtoo|laptop | If I buy n900 I'll run SHR on it |
| 11:57.09 | ali1234 | it might still need some closed parts |
| 11:57.10 | GNUtoo|laptop | it's an openembedded distribution |
| 11:57.23 | GNUtoo|laptop | "<ali1234> it might still need some closed parts "that's the issue |
| 11:57.37 | GNUtoo|laptop | battery charging is implemented |
| 11:57.49 | GNUtoo|laptop | but modem is a huge issue |
| 11:58.04 | ali1234 | but closed 3d drivers is ok? |
| 11:58.08 | GNUtoo|laptop | if I wanted a non-phone device like that I would buy a pandora etc... |
| 11:58.19 | GNUtoo|laptop | ali1234, I just won't use them, they are not mandatory |
| 11:58.36 | Alex[sp3dev] | closed 3d is ok.. rewriting 3d from scratch is going to be a very big pita |
| 11:58.36 | ali1234 | they are if you want to run any up to date distro |
| 11:59.21 | GNUtoo|laptop | I want SHR from oe |
| 11:59.37 | GNUtoo|laptop | I don't really need 3d |
| 12:00.06 | GNUtoo|laptop | if there was free 3d I would be really enthousiastic....but If it's not free, I can live without it |
| 12:02.56 | *** join/#htc-linux BazGee (~bazgraham@cpc1-sund2-0-0-cust716.11-1.cable.virginmedia.com) |
| 12:05.36 | ali1234 | seems the only closed part of n900 modem is the firmware |
| 12:05.44 | ali1234 | good luck finding a phone with open source radio rom :) |
| 12:07.14 | Ondalf | i still don't understand why that phone is even worth of mention since it was old since it was released. like resistive touchscreen, size and 3-row imo-not-so-handy keyb layout |
| 12:07.45 | Alex[sp3dev] | because it has a proper distro out of the box |
| 12:08.13 | dcordes | GNUtoo|laptop: it will be available eventually.. think chromeos |
| 12:08.16 | Ondalf | how does that make it special compared to Android phones? |
| 12:08.20 | leviathan | GNUtoo|laptop: is your dream still such functional, that you can try upstream? |
| 12:08.22 | *** join/#htc-linux gauner1986 (~gauner198@p508C6067.dip.t-dialin.net) |
| 12:08.29 | gauner1986 | hi |
| 12:08.36 | dcordes | hi gauner1986, others |
| 12:08.36 | GNUtoo|laptop | ali1234, I've a mail that describe the closed part needed, and I'm not talking about firmware |
| 12:08.46 | leviathan | GNUtoo|laptop: http://gitorious.org/msm-upstream/master/commits/master |
| 12:08.48 | Alex[sp3dev] | Ondalf: it allows you to run X11 apps natively without PITA. if you don't care, don't start trolling |
| 12:09.01 | GNUtoo|laptop | leviathan, ok |
| 12:09.06 | ali1234 | GNUtoo|laptop: i'd be interested in seeing it, i can't find any detailed information |
| 12:09.15 | dcordes | Ondalf: what is your point ? he wants to run something else than android. let him |
| 12:09.21 | Ondalf | Alex[sp3dev]: well, that is true. actually never thought it had proper X11 subsystem |
| 12:09.23 | leviathan | would be cool, if you could work out, why the keyboard isnt initialising |
| 12:09.35 | GNUtoo|laptop | let me look at my jabber logs |
| 12:09.39 | Ondalf | dcordes: just random thought |
| 12:09.44 | leviathan | GNUtoo|laptop: I'll go with my parents to eat now |
| 12:09.49 | dcordes | Ondalf: sounded like that yes |
| 12:10.01 | leviathan | GNUtoo|laptop: would be great if you could have a look |
| 12:10.11 | leviathan | GNUtoo|laptop: I'm sure I just overlooked something |
| 12:10.21 | dcordes | ali1234: can I ask you a favor? I've been trying to convert the htcleo backlight driver to use backlight instead of led api |
| 12:10.50 | ali1234 | dcordes: i need to port some led api to backlight api too for a totally different project |
| 12:10.51 | dcordes | http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=blob;f=arch/arm/mach-msm/board-htcleo-bkl.c;h=ed9552fa08d31b39291de07dab33c699e31355a1;hb=refs/heads/htc-msm-2.6.32 |
| 12:11.02 | ali1234 | so i need to figure out how to do it :) |
| 12:11.06 | dcordes | I have tried to work it out by an example |
| 12:11.22 | dcordes | namely htc dream backlight driver http://gitorious.org/htc-msm-2-6-32/leviathan-incoming/commit/9c2ad3e4e4c85686fb8cdeacb4b639de7a862c01 |
| 12:11.37 | dcordes | it gave some hints but it's out of my league |
| 12:11.43 | GNUtoo|laptop | http://lists.ofono.org/pipermail/ofono/2010-June/002669.html |
| 12:11.51 | ali1234 | i am familiar with led api but not backlight |
| 12:12.15 | dcordes | GNUtoo|laptop: MSM patches for ofono exist |
| 12:12.28 | phh | dcordes: it's used in rhobuntu I think ? |
| 12:12.40 | dcordes | leviathan: did you write that patch above ? |
| 12:12.47 | GNUtoo|laptop | dcordes, by msm you mean the modem or the cpu soc |
| 12:12.54 | dcordes | phh: I thought rhobuntu uses stock kernel |
| 12:13.00 | dcordes | GNUtoo|laptop: modem |
| 12:13.03 | phh | dcordes: yes it uses stock kernel |
| 12:13.05 | GNUtoo|laptop | ok |
| 12:13.06 | *** join/#htc-linux F-D (~Stoned@cpc3-newt5-0-0-cust349.newt.cable.virginmedia.com) |
| 12:13.08 | phh | but ofono is userland |
| 12:13.08 | ali1234 | GNUtoo|laptop: thanks. but check the note at the end. they are working on it... i guess that's the code that dropped a few days ago, but don't know for sure. |
| 12:13.23 | GNUtoo|laptop | ok |
| 12:13.25 | Refuge | hay |
| 12:13.27 | dcordes | phh: ok. by it I assumed you mean the backlight |
| 12:13.29 | GNUtoo|laptop | I really want to check |
| 12:13.34 | dcordes | phh: cause that was the last thing I said |
| 12:13.39 | phh | true |
| 12:13.40 | dcordes | nvm |
| 12:13.45 | Alex[sp3dev] | phh: how do we mmutrace i2c? |
| 12:13.58 | dcordes | yeah they use ofono as phone api on rhodium, phh |
| 12:14.12 | dcordes | phh: patched for msm |
| 12:14.13 | phh | Alex[sp3dev]: can't you read logs ? :D |
| 12:14.19 | dcordes | phh: with a little gui called sphone |
| 12:14.21 | Alex[sp3dev] | phh: sure |
| 12:14.29 | phh | Alex[sp3dev]: addlist mmutrace 0xb2300000 0x1 |
| 12:14.32 | phh | for the writes |
| 12:14.36 | phh | addlist mmutrace 0xb230000c 0x1 |
| 12:14.37 | phh | for the reads |
| 12:15.01 | Alex[sp3dev] | and what will the data look like? like i2c or like readable something? |
| 12:16.07 | phh | readable |
| 12:16.12 | *** part/#htc-linux EdangeL (~EdangeL@79.107.216.122) |
| 12:16.24 | phh | Alex[sp3dev]: the 0xb2300000 register will be either 1xx, 0yy, or 2yy |
| 12:16.29 | phh | the xx is the address, the yy are the data |
| 12:16.36 | phh | if it's 2yy, it's the end of the message |
| 12:16.39 | Alex[sp3dev] | phh: cool |
| 12:16.45 | phh | the first yy is the base register |
| 12:16.47 | leviathan | dcordes: there is written gnutoo? |
| 12:16.49 | leviathan | :-) |
| 12:17.07 | leviathan | dcordes: I'm going to konstanz now |
| 12:17.15 | leviathan | dinner with parents |
| 12:17.21 | leviathan | I'll come home this evening |
| 12:18.04 | GNUtoo|laptop | hmmm |
| 12:18.04 | GNUtoo|laptop | https://elektranox.org/n900/libisi/modem.html |
| 12:18.09 | GNUtoo|laptop | maybe they commited it |
| 12:18.29 | dcordes | leviathan: have phun |
| 12:18.38 | dcordes | leviathan: oh did you hear from the phone guy ? |
| 12:19.29 | dcordes | GNUtoo|laptop: can you help me with the backlight ? |
| 12:19.50 | dcordes | http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=blob;f=arch/arm/mach-msm/board-htcleo-bkl.c;h=ed9552fa08d31b39291de07dab33c699e31355a1;hb=refs/heads/htc-msm-2.6.32 |
| 12:20.19 | GNUtoo|laptop | I'll speak to him when he'll not be "do not disturb" |
| 12:20.36 | GNUtoo|laptop | dcordes, yes, but I've to do some maths very soon |
| 12:20.38 | DuperMan | backlight autoadjust near?^^ |
| 12:22.32 | GNUtoo|laptop | http://gitorious.org/htc-msm-2-6-32/leviathan-incoming/commit/9c2ad3e4e4c85686fb8cdeacb4b639de7a862c01 |
| 12:23.01 | GNUtoo|laptop | oops |
| 12:23.09 | GNUtoo|laptop | wrong commit |
| 12:23.41 | Markinus | dcordes: I started a bit to port our work to evos tree |
| 12:23.44 | GNUtoo|laptop | ah no |
| 12:23.49 | GNUtoo|laptop | it should be the right onw |
| 12:23.51 | GNUtoo|laptop | *oen |
| 12:23.53 | GNUtoo|laptop | *one |
| 12:25.10 | DuperMan | eh... GNUtoo|laptop: why're all instances of trout default backlight commented? |
| 12:25.24 | dcordes | GNUtoo|laptop: thanks. I am aware of that and tried to use it as an example |
| 12:25.30 | DuperMan | (sorry if I often ask stupid stuff, I'm pretty much using you guys to learn:) |
| 12:25.34 | dcordes | GNUtoo|laptop: but I have some strange functions that are not present |
| 12:25.42 | gauner1986 | Markinus: do you think it's worth the work? :) |
| 12:25.48 | dcordes | Markinus: nice |
| 12:25.55 | dcordes | Markinus: what about CA ? |
| 12:26.07 | dcordes | Markinus: then we can try to use xf86-video-msm :> |
| 12:26.52 | GNUtoo|laptop | dcordes, ??? |
| 12:27.07 | dcordes | GNUtoo|laptop: ? |
| 12:27.28 | GNUtoo|laptop | DuperMan, ??? |
| 12:27.32 | dcordes | ?!?! |
| 12:27.33 | GNUtoo|laptop | DuperMan, where? |
| 12:27.41 | GNUtoo|laptop | <dcordes> GNUtoo|laptop: but I have some strange functions that are not present |
| 12:27.43 | GNUtoo|laptop | which ones |
| 12:27.49 | DuperMan | GNUtoo|laptop: http://gitorious.org/htc-msm-2-6-32/leviathan-incoming/commit/9c2ad3e4e4c85686fb8cdeacb4b639de7a862c01 |
| 12:28.06 | dcordes | GNUtoo|laptop: 48 led_cdev->brightness = val; |
| 12:28.19 | DuperMan | line 25. could be reading it wrong:| |
| 12:28.28 | dcordes | GNUtoo|laptop: I can show you my diff but it's rather funny lol |
| 12:28.36 | dcordes | GNUtoo|laptop: I use like both led and bkl api |
| 12:29.08 | GNUtoo|laptop | DuperMan, I do not see any code commented in this example, the red is - the the green is + like in a patch |
| 12:29.16 | ali1234 | dcordes: i can take a look at this backlight stuff |
| 12:29.22 | GNUtoo|laptop | Dunedan, I'll look |
| 12:29.39 | GNUtoo|laptop | # are preprocessor stuff |
| 12:29.40 | DuperMan | oh. thought pound-sign ("#") meant commented. sorry. |
| 12:29.41 | dcordes | ali1234: that would be nice |
| 12:29.42 | GNUtoo|laptop | aka cpp |
| 12:29.52 | Markinus | dcordes: but there is some htc stuff missing |
| 12:29.58 | GNUtoo|laptop | in C comments are: |
| 12:29.58 | ali1234 | dcordes: what repo/branch do i find current driver on? |
| 12:29.59 | GNUtoo|laptop | / |
| 12:30.01 | GNUtoo|laptop | oops |
| 12:30.02 | GNUtoo|laptop | // |
| 12:30.05 | GNUtoo|laptop | or //* |
| 12:30.05 | DuperMan | // yeah |
| 12:30.09 | GNUtoo|laptop | oops |
| 12:30.14 | DuperMan | :) was dumb. sorry. makes more sense now |
| 12:30.19 | GNUtoo|laptop | or /* comment inside */ |
| 12:30.21 | GNUtoo|laptop | ok |
| 12:30.24 | dcordes | ali1234: http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=blob;f=arch/arm/mach-msm/board-htcleo-bkl.c;h=ed9552fa08d31b39291de07dab33c699e31355a1;hb=refs/heads/htc-msm-2.6.32 |
| 12:30.30 | Markinus | dcordes: I think it should be the best way to use a real htc device as platform |
| 12:30.59 | dcordes | Markinus: I second what NetRipper said there it will be most practical |
| 12:31.02 | ali1234 | dcordes: that's a gitweb, what branch is it? |
| 12:31.32 | dcordes | git://git.linuxtogo.org/home/groups/mobile-linux/kernel.git htc-msm-2.6.32 |
| 12:31.33 | GNUtoo|laptop | dcordes, that's easy |
| 12:31.34 | GNUtoo|laptop | return bd->props.brightness; |
| 12:31.40 | GNUtoo|laptop | bd is: |
| 12:31.52 | dcordes | yes I looked that up in backlight.h but didn't work |
| 12:31.54 | GNUtoo|laptop | struct backlight_device *bd; |
| 12:32.02 | GNUtoo|laptop | and you must set bd |
| 12:32.11 | dcordes | - led_cdev->brightness = val; |
| 12:32.11 | dcordes | + bd->props.brightness = val; |
| 12:32.29 | GNUtoo|laptop | didn't work at runtime? |
| 12:32.32 | GNUtoo|laptop | or compile-time |
| 12:32.33 | ali1234 | hmm, i don't have that branch, need to update |
| 12:32.38 | dcordes | <PROTECTED> |
| 12:33.24 | GNUtoo|laptop | ah ok |
| 12:33.27 | DuperMan | bbl. luck@all |
| 12:33.39 | GNUtoo|laptop | maybe a null pointer |
| 12:33.41 | dcordes | http://privatepaste.com/ee338dc746 be aware it's merely garbage |
| 12:33.49 | dcordes | copypaste |
| 12:34.14 | GNUtoo|laptop | struct backlight_device * |
| 12:34.20 | GNUtoo|laptop | name lacking |
| 12:34.24 | *** join/#htc-linux Termana (~bradley@123-3-179-126.static.dsl.dodo.com.au) |
| 12:35.16 | GNUtoo|laptop | +int htcleo_brightness_set(struct backlight_device *, enum led_brightness val) |
| 12:35.18 | GNUtoo|laptop | that's wrong |
| 12:35.38 | GNUtoo|laptop | struct backlight_device * -> struct backlight_device *bd |
| 12:38.55 | dcordes | 14:34 < GNUtoo|laptop> struct backlight_device * |
| 12:39.06 | dcordes | what you mean name lacking? |
| 12:39.19 | GNUtoo|laptop | that: |
| 12:39.20 | GNUtoo|laptop | <GNUtoo|laptop> struct backlight_device * -> struct backlight_device *bd |
| 12:39.38 | GNUtoo|laptop | aka: |
| 12:39.39 | GNUtoo|laptop | <GNUtoo|laptop> +int htcleo_brightness_set(struct backlight_device * , enum led_brightness val) |
| 12:39.41 | GNUtoo|laptop | is wrong |
| 12:41.14 | dcordes | I am not following lol |
| 12:41.32 | dcordes | do you have the branch ? |
| 12:43.27 | spanner3003 | hi i'm having trouble compiling a htc universal linux kernel image and android on ubuntu 10.04 |
| 12:43.36 | spanner3003 | this is the error i have http://pastebin.com/R7Z9GajF |
| 12:44.04 | GNUtoo|laptop | dcordes, in http://privatepaste.com/ee338dc746 |
| 12:44.11 | GNUtoo|laptop | do you think line25 is correct? |
| 12:46.46 | *** join/#htc-linux F-D (~Stoned@cpc3-newt5-0-0-cust349.newt.cable.virginmedia.com) |
| 12:46.56 | ali1234 | i'm still trying to update the branch :( |
| 12:47.01 | ali1234 | linuxtogo is slow |
| 12:49.09 | dcordes | GNUtoo|laptop: bro, as I said, I think nothing is correct |
| 12:49.19 | GNUtoo|laptop | ah ok |
| 12:49.41 | dcordes | GNUtoo|laptop: I only copy pasted things from your dream patch |
| 12:49.46 | GNUtoo|laptop | ah ok |
| 12:50.02 | dcordes | at least I got it to compile at some point and the backlight even did weird stuff before kernel rebooted |
| 12:50.11 | dcordes | so proud of that :D |
| 12:50.24 | GNUtoo|laptop | did you fix line25? |
| 12:51.07 | dcordes | #include <asm/io.h> |
| 12:51.19 | dcordes | it is needed for the i2c bits I think |
| 12:51.27 | dcordes | ? |
| 12:51.37 | dcordes | ali1234: true |
| 12:51.57 | ali1234 | dcordes: what you have so far looks ok except for the error on line 25 |
| 12:52.16 | ali1234 | you just need to swap out the line registering it as led for a line registering it as backlight |
| 12:53.03 | dcordes | ah right... patch line 25 |
| 12:53.10 | dcordes | -_* I was looking at my local file |
| 12:53.53 | *** join/#htc-linux BazGee (~bazgraham@cpc1-sund2-0-0-cust716.11-1.cable.virginmedia.com) |
| 12:58.55 | *** join/#htc-linux johnb81 (~john@78.161.50.142) |
| 13:14.37 | *** join/#htc-linux kvaster (~kvaster@vpn-e0.bas-net.by) |
| 13:16.04 | ali1234 | 13%, is this repo mirrored somewhere? |
| 13:16.46 | dcordes | ali1234: I don't think so :( |
| 13:17.07 | dcordes | ali1234: it has quite some obsolete unused stuff though |
| 13:21.30 | *** join/#htc-linux stiky94 (5b429a4b@gateway/web/freenode/ip.91.66.154.75) |
| 13:24.25 | *** join/#htc-linux Sjuust (~jmeij@ip3e839a58.speed.planet.nl) |
| 13:25.17 | dcordes | bbiab |
| 13:36.14 | spanner3003 | http://pastebin.com/VQZEwwNJ |
| 13:44.09 | *** join/#htc-linux Cass (~Cass@87-194-153-242.bethere.co.uk) |
| 13:49.44 | *** join/#htc-linux Major_Sarcasm (~chatzilla@79-73-30-253.dynamic.dsl.as9105.com) |
| 14:00.45 | *** join/#htc-linux ImHos (~ImHos@93.84.243.229) |
| 14:10.49 | *** join/#htc-linux GlemSom (~glemsom@0x5da34bca.cpe.ge-1-1-0-1105.sdnqu1.customer.tele.dk) |
| 14:25.40 | *** join/#htc-linux xUmaRix (~root@115.135.115.179) |
| 14:29.17 | *** join/#htc-linux |Jeroen| (~jeroen@94-224-23-216.access.telenet.be) |
| 14:31.35 | *** join/#htc-linux quaddamage (~quaddamag@62.140.137.100) |
| 14:31.41 | *** join/#htc-linux beeboobeeboo (meatshead@c-71-59-128-10.hsd1.wa.comcast.net) |
| 14:39.06 | *** join/#htc-linux EdangeL (~EdangeL@79.107.216.122) |
| 14:49.05 | *** part/#htc-linux EdangeL (~EdangeL@79.107.216.122) |
| 14:51.50 | *** join/#htc-linux flagada (58a1e24e@gateway/web/freenode/ip.88.161.226.78) |
| 14:53.38 | *** join/#htc-linux nineX_ (~nunya@75-132-13-29.dhcp.stls.mo.charter.com) |
| 14:58.18 | *** join/#htc-linux GNUtoo|laptop (~gnutoo@90.84.146.176) |
| 14:58.41 | shu8i | ~seen mattc |
| 14:58.47 | apt | mattc <~mattc@75.142.172.16> was last seen on IRC in channel #htc-linux, 4d 23h 11m 13s ago, saying: 'And a SUPER BRIGHT flash :)'. |
| 15:03.50 | DuperMan | shu8i: I refuse to make a fool and myself and beg for infos on your new cm6 release based rom |
| 15:07.48 | *** join/#htc-linux Termana (~bradley@123-3-143-120.static.dsl.dodo.com.au) |
| 15:08.45 | *** join/#htc-linux Refuge (~none@ppp-99-14-99-97.dsl.ipltin.sbcglobal.net) |
| 15:12.15 | GNUtoo|laptop | hi |
| 15:12.20 | GNUtoo|laptop | what's the value of LED_FULL ? |
| 15:12.22 | GNUtoo|laptop | 255? |
| 15:14.04 | DuperMan | I'm @ 93% battery and charging. can I "dmesg | grep" it for you when I hit 100%? |
| 15:14.10 | DuperMan | like, if I can - how?:) |
| 15:14.17 | GNUtoo|laptop | indeed |
| 15:14.18 | GNUtoo|laptop | <PROTECTED> |
| 15:14.26 | GNUtoo|laptop | in leds.h |
| 15:14.40 | DuperMan | ahhhh... nvm then:) |
| 15:15.10 | Alex[sp3dev] | i wonder whether i should pollute kernel with ugly led control code on kovsky or we should rather load the patterns from userspace via sysfs |
| 15:15.30 | DuperMan | btw, why does the led turn green before the battery monitor in android reaches 100%? usually happens at about 98% |
| 15:15.49 | DuperMan | (I'm on Leo) |
| 15:16.53 | *** part/#htc-linux kalemas (~kalemas@ns2.openhardware.ru) |
| 15:17.00 | Cass | becuase there is code in the kernel to tell it to go on at>= 99% to stop the battery over charging |
| 15:17.21 | DuperMan | ohhhhh neat |
| 15:17.24 | DuperMan | thanks |
| 15:17.27 | Cass | np |
| 15:17.54 | DuperMan | so the poller for battery status relies on the led?oO |
| 15:18.51 | Alex[sp3dev] | no, it's just the led drains so much power that the battery won't overcharge |
| 15:19.09 | DuperMan | that can't be real:| wow |
| 15:19.13 | DuperMan | lol |
| 15:20.14 | DuperMan | think I got it, ties in nicely with the tidbits of a conversation I overread some days ago. powering the led "bleeds" the battery to just under a full charge instead of being slightly over one |
| 15:21.15 | Alex[sp3dev] | actually the battery monitor in android may display the data with some delay. depends on how it is implemented |
| 15:22.19 | DuperMan | which accounts for the led appearing to turn green at 99%. the other bit accounting for why it's turned on at 99% (when had it been lit at 100% leo would've reported 99% when greened) |
| 15:22.29 | DuperMan | *when==while |
| 15:22.40 | GNUtoo|laptop | dcordes, |
| 15:22.42 | GNUtoo|laptop | hi |
| 15:22.47 | GNUtoo|laptop | dcordes, try that: http://pastebin.com/qFvvhANP |
| 15:22.53 | GNUtoo|laptop | it's not a patch |
| 15:22.57 | GNUtoo|laptop | but the modified file |
| 15:23.13 | GNUtoo|laptop | if you want I'll help you do the commit message |
| 15:23.22 | GNUtoo|laptop | because you didn't wrote the code I just wrote |
| 15:23.32 | GNUtoo|laptop | you may not know the details to put in the commit message |
| 15:23.37 | GNUtoo|laptop | where the code was copied |
| 15:23.41 | GNUtoo|laptop | etc... |
| 15:23.48 | GNUtoo|laptop | s/copied/copied from |
| 15:24.06 | GNUtoo|laptop | it's under git |
| 15:24.16 | GNUtoo|laptop | so it's easier to make a commit if I send you the full file |
| 15:26.24 | GNUtoo|laptop | ping dcordes |
| 15:26.35 | GNUtoo|laptop | btw I also need to PM you |
| 15:26.39 | GNUtoo|laptop | about the thing we talked about |
| 15:26.47 | GNUtoo|laptop | you may be able to help a lot a user |
| 15:28.27 | *** join/#htc-linux thejeos (oscarleong@84.123.186.211.dyn.user.ono.com) |
| 15:29.02 | *** join/#htc-linux spetrillo (~SteveP@71.167.186.40) |
| 15:29.45 | *** join/#htc-linux SVic (~SVic@79.132.117.128) |
| 15:32.06 | *** join/#htc-linux camro (~camro@89-104-29-101.customer.bnet.at) |
| 15:32.13 | camro | morning... |
| 15:32.23 | Alex[sp3dev] | sup camro |
| 15:32.49 | DuperMan | expecting Murphy to teleport dcordes back into irc in 4, 3, 2... |
| 15:33.35 | *** join/#htc-linux GNUtoo|laptop (~gnutoo@80.10.46.66) |
| 15:33.43 | camro | alex: thanks for your effort on driver 2+12 ... |
| 15:34.09 | Alex[sp3dev] | camro: i've actually decided to stick to 7 + 8 setup until we find an application that will crash |
| 15:34.12 | camro | played a lot, but doesn'T work with 2+12 ...so we are back on the road with 7+8+1 and it is working fine .. |
| 15:34.14 | *** join/#htc-linux user_ (user@220-142-3-118.dynamic.hinet.net) |
| 15:34.32 | Alex[sp3dev] | camro: i think that in driver, the values are flags rather than memory sizes |
| 15:34.56 | xUmaRix | latest rootfs still x fix gralloc ? |
| 15:34.57 | camro | yes, it is not only this values ... |
| 15:35.17 | camro | xUmaRix: ähm - should be .. |
| 15:35.26 | camro | i gave phh: the changes ... |
| 15:35.37 | *** join/#htc-linux Andreyxxl[HD2EU] (~Andreyxxl@89.32.146.153) |
| 15:36.11 | xUmaRix | hmm but it is diff frm ur rootfs |
| 15:37.10 | camro | well, my version was a debug version ... |
| 15:37.28 | Alex[sp3dev] | camro: how have you actually calculated the new heap size? |
| 15:37.31 | camro | please try the latest rootfs and let me know ... |
| 15:37.42 | camro | xUmaRix: to be sure... start |
| 15:37.51 | camro | start the system with latest rootfs |
| 15:37.59 | camro | then do in console: |
| 15:38.17 | camro | ls -l /system/lib/hw |
| 15:38.30 | xUmaRix | i can c msm7k_wvga |
| 15:38.33 | camro | look there should be 2 gralloc files in there .. |
| 15:38.43 | Alex[sp3dev] | btw, new rootfs is kinda stupid. if you have 4 primary partitions on your mmc card, make sure to add no_partitions option to cmdline, otherwise it will do bad things |
| 15:38.48 | camro | and check the times ... |
| 15:39.21 | xUmaRix | only 2 mount /system/lib/hw and /lib/froyo/hw/gralloc.msm7k.so |
| 15:39.41 | camro | and tell me, if the gralloc.msm7k_wvga.so have the same date as gralloc.msm7k.so |
| 15:40.12 | camro | the /lib/froyo will be mounted (if froyo system) |
| 15:40.31 | camro | the important dir is after starting .. -> /system/lib/hw |
| 15:40.38 | camro | please look .. |
| 15:42.33 | GNUtoo|laptop | ping dcordes |
| 15:42.40 | *** join/#htc-linux lenix (~irc@lenix.de) |
| 15:43.19 | camro | ALex: the new calculated heapsize was from the old value and related to: old value -> 640x480x2kb |
| 15:43.36 | camro | ALex: the new calculated heapsize -> new value -> 800x480x2kb |
| 15:43.45 | camro | + chkbit |
| 15:43.50 | Alex[sp3dev] | camro: the old value may have been calcualted for 320 * 480 * 3 or so |
| 15:44.15 | camro | puh .. good question ... |
| 15:44.22 | camro | on vga it was working ... |
| 15:44.30 | camro | on wvga - there was a problem |
| 15:44.42 | Alex[sp3dev] | but yeah, 480 * 680 * 4 equals 1200 << 10 |
| 15:44.44 | camro | one page ... 800x480x2kb |
| 15:45.12 | Alex[sp3dev] | so, new size should probably be more than 0x177000 |
| 15:45.26 | Alex[sp3dev] | that is 1500 << 10. is that like so? |
| 15:45.42 | camro | only for me ...the best would be to can easily modify the hsize |
| 15:46.04 | camro | ex: not 100%, but ex: gallery3d crash on rotating ... |
| 15:46.21 | camro | if it is set to double hsize, then the rotate also works |
| 15:46.31 | Alex[sp3dev] | for me it doesn't crash but it takes soooo long to load that i've never waited for it to complete |
| 15:46.36 | *** join/#htc-linux C_h_r_i_s (~ja@dslb-084-057-090-215.pools.arcor-ip.net) |
| 15:46.47 | camro | but here - in my mind ...the problem is on gallery, and this would be a very dirty fix |
| 15:46.59 | camro | on wvga ? |
| 15:47.05 | Alex[sp3dev] | yes, wvga |
| 15:47.11 | camro | try an rotate of the phone when gallery is active |
| 15:47.20 | Alex[sp3dev] | i have played several games yesterday. no oom so far |
| 15:47.21 | camro | on main side |
| 15:47.43 | Alex[sp3dev] | i will try. need to fix my kernel first |
| 15:47.44 | camro | try gallery3d ..main side ...then rotate the phone ... |
| 15:48.11 | camro | the display will be gone to black ... after +15sec it will be back ... |
| 15:48.17 | camro | but this is not normal |
| 15:49.39 | *** part/#htc-linux hyperfire21 (62df0fbe@gateway/web/freenode/ip.98.223.15.190) |
| 15:49.45 | *** join/#htc-linux hyperfire21 (62df0fbe@gateway/web/freenode/ip.98.223.15.190) |
| 15:49.46 | *** join/#htc-linux programmer8922 (~Evan@67.219.166.182) |
| 15:52.15 | camro | phh: have you take the correct wvga gralloc to rootfs ? |
| 15:52.46 | camro | because xUmaRix: told me, that it is correct mounted (wvga to normal gralloc) |
| 15:52.52 | *** join/#htc-linux Jack-E (~chatzilla@host86-153-182-168.range86-153.btcentralplus.com) |
| 15:53.31 | *** join/#htc-linux brnshroom (shroom2k1@c-76-30-186-106.hsd1.tx.comcast.net) |
| 15:54.38 | phh | yes |
| 15:54.44 | phh | md5sum ? |
| 15:56.10 | dcordes | GNUtoo|laptop: pong |
| 15:56.13 | camro | i haven |
| 15:56.18 | camro | 't take a look ... |
| 15:56.37 | GNUtoo|laptop | dcordes, look at my source file |
| 15:56.46 | camro | do you have the link for comment ? |
| 15:56.53 | GNUtoo|laptop | and tell me the compile error |
| 15:56.54 | camro | last commit |
| 15:58.24 | GNUtoo|laptop | dcordes, http://pastebin.com/qFvvhANP |
| 16:01.01 | dcordes | GNUtoo|laptop: thanks. trying |
| 16:02.35 | dcordes | arch/arm/mach-msm/board-htcleo-bkl.c:50: error: 'struct backlight_device' has no member named 'prop' |
| 16:02.56 | GNUtoo|laptop | dcordes, let me look |
| 16:03.21 | GNUtoo|laptop | change it to props |
| 16:04.24 | dcordes | arch/arm/mach-msm/board-htcleo-bkl.c:87: error: 'LED_FULL' undeclared (first use in this function) |
| 16:04.32 | dcordes | arch/arm/mach-msm/board-htcleo-bkl.c:89: error: implicit declaration of function 'rout_brightness_set' |
| 16:04.39 | dcordes | arch/arm/mach-msm/board-htcleo-bkl.c:104: error: 'htcleo_backlight_remove' undeclared here (not in a function) |
| 16:05.35 | camro | phh: not sure if this was my mistake .... |
| 16:05.42 | camro | but please change it . |
| 16:05.43 | camro | [2010-08-28 18:05] <camro> mount --bind /lib/froyo/hw/gralloc.msm7k_wvga.so /system/lib/froyo/hw/gralloc.msm7k.so |
| 16:05.43 | camro | [2010-08-28 18:05] <camro> to |
| 16:05.44 | camro | [2010-08-28 18:05] <camro> mount --bind /lib/froyo/hw/gralloc.msm7k_wvga.so /system/lib/hw/gralloc.msm7k.so |
| 16:05.57 | phh | camro: oh |
| 16:05.59 | phh | must have been me |
| 16:06.05 | camro | i think so :) |
| 16:06.15 | camro | don'T worry ;-) |
| 16:06.46 | jonpry | phh: you ready for an alsa patch? |
| 16:06.48 | GNUtoo|laptop | ok |
| 16:06.52 | phh | jonpry: oh yeah |
| 16:06.56 | camro | xUmaRix: thanks for reporting... |
| 16:07.11 | xUmaRix | np |
| 16:07.44 | xUmaRix | i bet phh have lots of things in his mind |
| 16:08.00 | camro | xUmaRix: my old debug version you can remove ...(there i had also an file to see which gralloc system is mounted, etc ...) |
| 16:08.25 | jonpry | phh: you will need some kind of msm_snd player to get it working though. like linuxtogo.org/~lgorris/misc/playwav2.c |
| 16:08.34 | jonpry | http://hotfile.com/links/65322866/85fed73/alsa.zip |
| 16:08.54 | camro | wihout phh & a lot of other guys .. this project would be canceled ... |
| 16:09.07 | camro | thanks to all of them ... |
| 16:09.12 | jonpry | and some obvious changes to .config |
| 16:09.12 | phh | jonpry: deleted file ? |
| 16:09.21 | phh | jonpry: you gave the link that gives all rights btw :p |
| 16:10.02 | jonpry | http://hotfile.com/dl/65322866/e829d2d/alsa.zip.html |
| 16:10.08 | camro | Alex: have you treid my test via gallery3d ? (rotate) ? |
| 16:10.08 | jonpry | seems to work now |
| 16:10.23 | *** join/#htc-linux Blizzzard_ (5e067a08@gateway/web/freenode/ip.94.6.122.8) |
| 16:10.23 | GNUtoo|laptop | dcordes, http://pastebin.com/1RduWz27 |
| 16:10.24 | GNUtoo|laptop | try that |
| 16:10.26 | Alex[sp3dev] | camro: not yet |
| 16:10.32 | camro | ok |
| 16:10.51 | phh | jonpry: right |
| 16:11.34 | dcordes | GNUtoo|laptop: aight |
| 16:11.35 | jonpry | phh: i think it makes it hang. say 1 in 5 boots. or maybe that is what users are reporting with just adsp fix |
| 16:11.51 | GNUtoo|laptop | dcordes, ? |
| 16:11.51 | GNUtoo|laptop | what are the errors now? |
| 16:12.02 | phh | jonpry: ok |
| 16:12.05 | camro | xUmaRix: phh puhed the changes ... |
| 16:12.15 | camro | please try the new rootfs |
| 16:12.37 | xUmaRix | ok rebooting android |
| 16:12.44 | xUmaRix | btw i always get E/TelephonyProvider( 1650): Failed setting numeric '50219' to the current operator |
| 16:13.00 | xUmaRix | even after i setprop the value |
| 16:14.15 | dcordes | GNUtoo|laptop: |
| 16:14.15 | dcordes | arch/arm/mach-msm/board-htcleo-bkl.c:89: error: implicit declaration of function 'rout_brightness_set' |
| 16:15.39 | GNUtoo|laptop | dcordes, http://pastebin.com/i7Y5NjmY |
| 16:16.44 | dcordes | GNUtoo|laptop: compiled |
| 16:16.50 | dcordes | booting in a minute |
| 16:16.54 | GNUtoo|laptop | dcordes, ok |
| 16:16.59 | GNUtoo|laptop | I hope it works |
| 16:17.10 | GNUtoo|laptop | because all what I did was without access to the hardware |
| 16:17.16 | dcordes | oh not |
| 16:17.22 | *** join/#htc-linux SVic (~SVic@ip128.117.dars-ip.ru) |
| 16:17.26 | GNUtoo|laptop | reboot? |
| 16:17.27 | dcordes | in |
| 16:17.32 | dcordes | `htcleo_backlight_remove |
| 16:17.39 | dcordes | backlight_device_unregister |
| 16:17.45 | dcordes | backlight_device_register |
| 16:17.46 | dcordes | undefeined |
| 16:18.06 | dcordes | 86, 96 |
| 16:18.11 | GNUtoo|laptop | ? |
| 16:18.15 | GNUtoo|laptop | 86,96? |
| 16:18.22 | dcordes | /home/luke-g/hacking/src/kernel/linuxtogo/arch/arm/mach-msm/board-htcleo-bkl.c:96: undefined reference to `backlight_device_unregister' |
| 16:18.42 | GNUtoo|laptop | ok |
| 16:18.52 | GNUtoo|laptop | you addr2lineed it |
| 16:19.36 | GNUtoo|laptop | kernel version? |
| 16:19.43 | dcordes | 2.6.32.9 |
| 16:20.37 | *** join/#htc-linux Jack-E (~chatzilla@host86-153-182-168.range86-153.btcentralplus.com) |
| 16:20.49 | GNUtoo|laptop | strange |
| 16:21.00 | GNUtoo|laptop | how do you get the lines btw |
| 16:21.04 | GNUtoo|laptop | I use addr2line |
| 16:21.21 | dcordes | automagic |
| 16:21.58 | dcordes | 'git grep backlight_device_register' |
| 16:22.10 | GNUtoo|laptop | ah ok |
| 16:22.53 | dcordes | include/linux/backlight.h:extern struct backlight_device *backlight_device_register(const char *name, |
| 16:23.01 | GNUtoo|laptop | I know |
| 16:23.04 | GNUtoo|laptop | but we included that |
| 16:23.10 | GNUtoo|laptop | personally I use that: |
| 16:23.12 | dcordes | yes so what's the problem ? |
| 16:23.24 | GNUtoo|laptop | http://lxr.free-electrons.com/ident |
| 16:23.27 | GNUtoo|laptop | I don't know |
| 16:23.30 | GNUtoo|laptop | strange strange |
| 16:23.46 | GNUtoo|laptop | basically backlight_device_unregister should exist |
| 16:23.51 | GNUtoo|laptop | it linked to it |
| 16:23.52 | GNUtoo|laptop | ahhh |
| 16:23.53 | GNUtoo|laptop | I know |
| 16:23.59 | GNUtoo|laptop | add backlight support in your kenrel |
| 16:24.04 | dcordes | ? |
| 16:24.10 | dcordes | I have the backlight.h |
| 16:24.10 | GNUtoo|laptop | make ARCH=arm xconfig |
| 16:24.13 | dcordes | ah lol |
| 16:24.50 | dcordes | BACKLIGHT_CLASS_DEVICE |
| 16:25.12 | GNUtoo|laptop | yes |
| 16:25.14 | GNUtoo|laptop | but also add that |
| 16:25.22 | GNUtoo|laptop | BACKLIGHT_GENERIC |
| 16:25.39 | GNUtoo|laptop | so we would be safe |
| 16:25.47 | GNUtoo|laptop | I'm not sure it's really necessary |
| 16:25.51 | GNUtoo|laptop | but let's try with it |
| 16:25.54 | GNUtoo|laptop | I've it anyway |
| 16:26.32 | GNUtoo|laptop | then: |
| 16:26.50 | GNUtoo|laptop | cd /sys/class/backlight/ |
| 16:26.54 | GNUtoo|laptop | when it's booted |
| 16:27.02 | GNUtoo|laptop | but anyway it should be 255 |
| 16:27.07 | GNUtoo|laptop | (the intensity) |
| 16:27.09 | GNUtoo|laptop | so.... |
| 16:27.16 | dcordes | I will try it in gnome ;) |
| 16:27.20 | GNUtoo|laptop | you should see something |
| 16:27.42 | dcordes | nothing like 2GB rootfs for debugging |
| 16:27.47 | GNUtoo|laptop | lol |
| 16:27.49 | xUmaRix | everything is fine phh |
| 16:27.59 | xUmaRix | good job |
| 16:28.19 | GNUtoo|laptop | shr + cross-tools + source is fine too |
| 16:28.42 | GNUtoo|laptop | I use gdbserver + gdb or strace or addr2line or printks etc... |
| 16:28.44 | GNUtoo|laptop | it works there too |
| 16:28.53 | GNUtoo|laptop | easier with the sources |
| 16:30.20 | dcordes | looking good :D |
| 16:30.23 | dcordes | gnome is in command |
| 16:30.41 | GNUtoo|laptop | so it works? |
| 16:30.47 | GNUtoo|laptop | cd /sys/class/backlight? |
| 16:30.47 | GNUtoo|laptop | ls |
| 16:30.48 | GNUtoo|laptop | ? |
| 16:31.07 | GNUtoo|laptop | cd htcleo-backlight |
| 16:32.57 | dcordes | GNUtoo|laptop: looks good but I need to reboot with keyboard connected |
| 16:33.09 | GNUtoo|laptop | ok |
| 16:33.11 | dcordes | GNUtoo|laptop: gnome automatically toggled brightness during startup |
| 16:33.29 | dcordes | GNUtoo|laptop: and the panel applet doesn't show the error symbol but due to input problem I couldn't toggle |
| 16:33.43 | GNUtoo|laptop | ok |
| 16:34.05 | GNUtoo|laptop | then if it's working you could try to enable parts of fso |
| 16:34.08 | GNUtoo|laptop | on SHR |
| 16:35.05 | dcordes | I am wondering if android can handle with backlight aboi |
| 16:35.06 | dcordes | api |
| 16:35.15 | dcordes | hd2 andro users present ? |
| 16:36.12 | Alex[sp3dev] | basically it should handle if you change some string constants in lights library, i think |
| 16:36.32 | *** join/#htc-linux stroller^ (5e9fb876@gateway/web/freenode/ip.94.159.184.118) |
| 16:40.40 | dcordes | GNUtoo|laptop: epic you da man ! |
| 16:40.47 | GNUtoo|laptop | lol so it works |
| 16:40.50 | GNUtoo|laptop | nice!!! |
| 16:40.50 | dcordes | GNUtoo|laptop: it works manually with device node |
| 16:40.53 | GNUtoo|laptop | nice |
| 16:40.55 | dcordes | GNUtoo|laptop: with applet |
| 16:41.01 | dcordes | GNUtoo|laptop: auto dim with gnome pm settings :) |
| 16:41.05 | GNUtoo|laptop | wow |
| 16:41.06 | GNUtoo|laptop | nice |
| 16:41.08 | dcordes | epiccc |
| 16:41.11 | dcordes | :D |
| 16:41.12 | GNUtoo|laptop | and it would even work under FSO |
| 16:41.16 | dcordes | sure |
| 16:41.24 | dcordes | I'm sure it will I mean |
| 16:41.28 | GNUtoo|laptop | is happy |
| 16:41.35 | dcordes | now need to push it as an option |
| 16:41.40 | GNUtoo|laptop | indeed |
| 16:41.41 | dcordes | to the LED |
| 16:41.53 | GNUtoo|laptop | dcordes, do you know #ifdef |
| 16:41.58 | GNUtoo|laptop | or I can do it later too |
| 16:42.03 | GNUtoo|laptop | I know kernel build system too |
| 16:42.31 | dcordes | GNUtoo|laptop: looking at the diff it will be a total mess with ifdef |
| 16:42.45 | GNUtoo|laptop | hmmm |
| 16:42.52 | GNUtoo|laptop | then maybe 2 files |
| 16:42.56 | GNUtoo|laptop | one for led |
| 16:43.01 | GNUtoo|laptop | and one for backlight |
| 16:43.01 | dcordes | yeah and config as prompt choice |
| 16:43.09 | GNUtoo|laptop | and a radio button for choosing |
| 16:43.13 | GNUtoo|laptop | and in the makefile: |
| 16:43.34 | GNUtoo|laptop | it compiles file1 if radiobutton choosed 1,and file2 if radiobutton chosed 2 |
| 16:43.57 | dcordes | what you mean radiobutton ? |
| 16:44.13 | jonpry | phh: i have a plan on how to get an i2c mmutrace on a1010 initialization |
| 16:44.33 | dcordes | I klnow how to make it a choice |
| 16:44.33 | GNUtoo|laptop | (X) |
| 16:44.36 | dcordes | ah |
| 16:45.08 | GNUtoo|laptop | http://en.wikipedia.org/wiki/Radio_button |
| 16:45.16 | GNUtoo|laptop | look at the right |
| 16:45.27 | dcordes | #arch/arm/mach-msm/board-htcleo-bl.c |
| 16:45.35 | dcordes | #arch/arm/mach-msm/board-htcleo-bl-led.c |
| 16:45.43 | GNUtoo|laptop | so you know kernel build system |
| 16:45.55 | Alex[sp3dev] | jonpry: ftw, wrap i2c driver on wince. or, even better, patch a1010 driver to open, say, "FOO1:" instead of "I2C1:" and, certainly, write a proxy driver that will direct calls from foo to i2c. and just log writes from your proxy driver |
| 16:45.59 | GNUtoo|laptop | so I'll let you integrate it then |
| 16:46.08 | GNUtoo|laptop | yes that should be ok |
| 16:46.16 | *** join/#htc-linux mayohead_ (~ethan@c-71-59-128-10.hsd1.wa.comcast.net) |
| 16:46.43 | jonpry | Alez[sp3dev]. the deviceiocontrol for the i2c driver makes no sense to me. |
| 16:47.21 | dcordes | obj-$(CONFIG_MACH_HTCLEO_BACKLIGHT) += board-htcleo-bkl.o |
| 16:47.22 | *** join/#htc-linux honorcharityhope (443ead60@gateway/web/freenode/ip.68.62.173.96) |
| 16:47.22 | dcordes | obj-$(CONFIG_MACH_HTCLEO_BACKLIGHT_LED) += board-htcleo-bkl-led.o |
| 16:47.38 | honorcharityhope | so in Layman's terms, what does all this mean in relation to Power Management? |
| 16:47.56 | dcordes | lol it even turns the screen off fully after a while |
| 16:48.06 | xUmaRix | phh is there any changes in keymap |
| 16:48.11 | jonpry | Alex[sp3dev] i think it sets up a bunch of function pointers that get used later on |
| 16:48.12 | dcordes | GNUtoo|laptop: everything below 30 turns it off |
| 16:48.21 | phh | xUmaRix: read the changelog ? |
| 16:48.24 | xUmaRix | power button seems to be like end button |
| 16:48.29 | GNUtoo|laptop | dcordes, yes it's normal |
| 16:48.32 | GNUtoo|laptop | dcordes, read the source code |
| 16:48.40 | GNUtoo|laptop | it was there before |
| 16:48.47 | GNUtoo|laptop | I kept it |
| 16:48.48 | Alex[sp3dev] | dcordes: why do you want to keep the old led driver? |
| 16:49.02 | dcordes | Alex[sp3dev]: because I fear android needs it |
| 16:49.21 | Alex[sp3dev] | dcordes: let android devs rewrite the library instead of making hacks in kernel |
| 16:49.27 | Alex[sp3dev] | http://android.git.kernel.org/?p=platform/hardware/msm7k.git;a=blob;f=liblights/lights.c;h=af435c3ee5d6f40af50e1c83c5ff1ce58fabb712;hb=852205246a4b9cf2bea4ca42b5c52a6798cb37b4 |
| 16:49.29 | xUmaRix | phh where Changelog |
| 16:49.37 | Alex[sp3dev] | take a look. i think it can be easily changed |
| 16:49.39 | phh | xUmaRix: rootfs for keymaps |
| 16:50.21 | Alex[sp3dev] | dcordes: do you have android on your device to test? |
| 16:50.50 | *** join/#htc-linux en1gma (~abc@173-31-88-49.client.mchsi.com) |
| 16:51.15 | dcordes | Alex[sp3dev]: no :( |
| 16:51.24 | dcordes | Alex[sp3dev]: I'm asking so to test if it works ootb |
| 16:53.46 | phh | jonpry: 16M 0001-jonpry-Little-alsa-update.patch |
| 16:53.58 | xUmaRix | phh which is the home button now ? |
| 16:54.04 | phh | xUmaRix: uh ? |
| 16:54.06 | phh | it hasn't moved |
| 16:54.08 | phh | AFAIK |
| 16:54.09 | phh | so power button |
| 16:54.27 | xUmaRix | seems like power button is end button |
| 16:54.33 | phh | no |
| 16:54.34 | xUmaRix | no home button at all |
| 16:54.44 | phh | when I say power button, it's hardware power button |
| 16:54.50 | Alex[sp3dev] | phh: how are buttons mapped on a real device? do they have the same shit with end button and sleep mapped to the same key? |
| 16:54.57 | phh | Alex[sp3dev]: no |
| 16:54.57 | *** join/#htc-linux beeboobeeboo (~non@c-71-59-128-10.hsd1.wa.comcast.net) |
| 16:55.08 | phh | Alex[sp3dev]: well |
| 16:55.09 | phh | yes |
| 16:55.14 | phh | for devices that has an end device |
| 16:55.28 | phh | but still, the sleep key is power button too |
| 16:55.35 | phh | well that's what I've been told at least :p |
| 16:55.44 | phh | (my android phone doesn't have an end button) |
| 16:55.57 | honorcharityhope | but remember on the Sprint TP2's, the sleep and power buttons are the same |
| 16:56.10 | *** join/#htc-linux gauner1986 (~yaaic@ip-88-152-47-139.unitymediagroup.de) |
| 16:56.10 | Alex[sp3dev] | phh: so, wtf is power button mapped to home but not sleep? kind of stupid |
| 16:56.10 | honorcharityhope | but the Verizon TP2's have power on the same button as End Call |
| 16:56.22 | xUmaRix | on my blac100 if i hold home(menu button) keyboard will popup |
| 16:56.26 | GNUtoo|laptop | dcordes, I'll go bye |
| 16:56.32 | honorcharityhope | it's the difference between Rhodium 400(sprint) and Rhodium 500(VZW) |
| 16:56.35 | phh | xUmaRix: that's not home then. |
| 16:56.38 | phh | yeah right |
| 16:56.39 | GNUtoo|laptop | thanks for the testing |
| 16:56.41 | phh | hardware home |
| 16:56.43 | xUmaRix | yeah |
| 16:56.44 | phh | honorcharityhope: lolwat ? |
| 16:56.47 | Alex[sp3dev] | xUmaRix: which device? |
| 16:56.52 | xUmaRix | blac100 |
| 16:57.00 | Alex[sp3dev] | ah, then i dunno |
| 16:57.01 | honorcharityhope | TP2 = Touch Pro 2 |
| 16:57.09 | phh | honorcharityhope: I know |
| 16:57.13 | honorcharityhope | Rhodium 400 and 500 are the CDMA versions |
| 16:57.24 | phh | but when you say "sleep button", you mean the way to put the system in sleep from android right ? |
| 16:57.37 | xUmaRix | hw pwr button previously mapped to home but latest rootfs it is mapped to end |
| 16:57.50 | phh | wtf |
| 16:57.57 | xUmaRix | hw end button is mapped to sleep |
| 16:58.08 | phh | since when ? |
| 16:58.22 | xUmaRix | i can wake my device pushin hw pwr btn |
| 16:58.32 | xUmaRix | holding hw pwr button go to recent app |
| 16:58.42 | phh | xUmaRix: yes that's the normal behaviour |
| 16:58.47 | phh | pwr button is the home key. |
| 16:59.05 | xUmaRix | but when device wake hw pwr btn x home key |
| 16:59.28 | phh | what ? |
| 16:59.37 | xUmaRix | i cant execute launcherpro preview screen but i can go to home on default froyo launcher |
| 16:59.54 | xUmaRix | or even adwlauncher |
| 17:00.09 | phh | uh ? |
| 17:00.11 | xUmaRix | both using end key to home screen |
| 17:00.47 | xUmaRix | so whn i push hw pwr btn android detect as end key and go to homescreen for ADW |
| 17:01.22 | phh | okay that's where the problem is. |
| 17:01.25 | phh | to go to homescreen |
| 17:01.27 | phh | the key is home |
| 17:01.27 | phh | not end |
| 17:01.45 | GNUtoo|laptop | bye |
| 17:01.52 | phh | (for ease of comprehension, button = hardware button, key = software key, ok ? :D) |
| 17:02.12 | Alex[sp3dev] | phh: no, it's the other way round |
| 17:02.17 | xUmaRix | lol |
| 17:02.20 | phh | Alex[sp3dev]: meh |
| 17:02.22 | phh | what ? |
| 17:02.50 | xUmaRix | damn android just hang after i make a call |
| 17:03.13 | Alex[sp3dev] | ok. i think we need it like that. power key at the top of device = suspend, red hangup hardware key = end call and no suspend |
| 17:03.36 | DuperMan | phh is using a buttonboard:P |
| 17:03.44 | xUmaRix | home key = pwr button but not working |
| 17:03.44 | Alex[sp3dev] | what? |
| 17:03.45 | phh | Alex[sp3dev]: I don't know if that's possible |
| 17:03.49 | phh | xUmaRix: well it works |
| 17:03.53 | Alex[sp3dev] | phh: why impossible? |
| 17:03.56 | phh | since it put you to froyo launcher |
| 17:04.03 | camro | phh: can it be possible, that on latest rootfs there is the button mappin g different ? |
| 17:04.06 | phh | Alex[sp3dev]: because android is weird/idiot ? :D |
| 17:04.11 | phh | camro: compared to the one before ? no |
| 17:04.13 | xUmaRix | end key = pwr button |
| 17:04.23 | Alex[sp3dev] | phh: patch android then? i don't want stupidity on my phone |
| 17:04.41 | camro | xUmaRix: then, i don't understand what happen on your system |
| 17:04.42 | phh | meh |
| 17:05.12 | camro | xUmaRix: do you have the old rootfs from me ? |
| 17:05.20 | camro | (from yesterday) ? |
| 17:05.20 | Alex[sp3dev] | basically, is it that stupid on vogue? |
| 17:05.32 | camro | please try this ... |
| 17:05.32 | xUmaRix | previously end button = end key,sleep key |
| 17:06.04 | xUmaRix | previously pwr button = home key,recent app key |
| 17:06.05 | camro | (only that you know,) -> sometimes i installed an app, but maybe something goes wrong and the button mapping was corrupted |
| 17:06.31 | phh | xUmaRix: ok, and now ? |
| 17:06.33 | camro | then i have to reinstall from scratch .. or whatever .. or you try to deelte the user settings under appilcation manager |
| 17:06.52 | xUmaRix | now pwr btn = end key,recent app key |
| 17:06.56 | phh | jonpry: am I supposed to push the 16MB patch on my poor connection ? -_-' |
| 17:07.09 | Alex[sp3dev] | phh: does auto-backlight work? or is it not-implemented? |
| 17:07.14 | phh | xUmaRix: how the hell is that possible |
| 17:07.19 | xUmaRix | now end btn = sleep key,shutdown key |
| 17:07.36 | xUmaRix | i dont know just update rootfs |
| 17:07.44 | *** join/#htc-linux en1gma (~abc@173-31-88-49.client.mchsi.com) |
| 17:07.59 | phh | Alex[sp3dev]: I don't know :s |
| 17:08.01 | phh | it's kind of implemented |
| 17:08.05 | camro | please try my rootfs again ... |
| 17:08.18 | xUmaRix | i just cant find home key |
| 17:08.27 | camro | if it does also not work, then maybe something goes wrong ... |
| 17:08.32 | Alex[sp3dev] | damn, android takes us back to the linux of the nineties |
| 17:08.39 | phh | Alex[sp3dev]: -_-' |
| 17:08.41 | xUmaRix | ok camro |
| 17:08.42 | camro | or give me the link to latest rootfs, and i'll try it here ... |
| 17:08.58 | phh | http://is.gd/eIrO0 |
| 17:09.02 | xUmaRix | http://gitorious.org/xdandroid-eclair/eclair-rootfs/blobs/master/init.etc/keymaps/microp-keypad.kl |
| 17:09.08 | jonpry | phh: what kind of connection do you have? that is small fry |
| 17:09.15 | phh | jonpry: 100kB/s upload |
| 17:09.18 | phh | good old adsl |
| 17:09.41 | *** join/#htc-linux gauner1986 (~yaaic@ip-88-152-47-139.unitymediagroup.de) |
| 17:09.49 | camro | i'm very disapointed, because i would like to set the long press power button to start an special application (like advanced task amanger, but haven'T looked now how to do it ..) |
| 17:09.56 | *** join/#htc-linux jopher (4b1ca11b@gateway/web/freenode/ip.75.28.161.27) |
| 17:10.10 | phh | oh right it's compressed |
| 17:10.11 | phh | cool |
| 17:10.24 | CIA-109 | htc-linux: phhusson htc-msm-2.6.27 * rv2.6.27-1157-gecca421 / (1010 files in 103 dirs): <jonpry> Little alsa update. |
| 17:10.38 | phh | jonpry: ok that was fast |
| 17:10.40 | Alex[sp3dev] | phh: you have pushed it to master? |
| 17:10.48 | phh | Alex[sp3dev]: it's written, htc-msm-2.6.27 |
| 17:10.48 | dcordes | jonpry: alsa in htc-msm-2.6.27 ? |
| 17:10.53 | dcordes | jonpry: it works ? |
| 17:11.04 | gauner1986 | hey |
| 17:11.05 | phh | damn I didn't even test it builds fine |
| 17:11.09 | jonpry | yeah it works |
| 17:11.17 | Alex[sp3dev] | phh: oh, now we'll never make it to a newer kernel |
| 17:11.25 | phh | Alex[sp3dev]: :D |
| 17:11.33 | Alex[sp3dev] | but alsa should be cool |
| 17:11.47 | jonpry | but you need to use an msm_snd player to set the output device |
| 17:11.51 | camro | what is this alsa baby ? |
| 17:11.55 | phh | jonpry: ah just that |
| 17:11.56 | phh | ok |
| 17:12.01 | phh | I thoguht it was something weirder |
| 17:12.03 | Alex[sp3dev] | we can now enjoy bloodshot-eyed gentoo |
| 17:12.07 | jonpry | it might be |
| 17:12.10 | phh | jonpry: **hint** snd.force_headset=1 |
| 17:12.12 | phh | connect headset |
| 17:12.15 | phh | and you don't even need msm_snd :D |
| 17:12.23 | dcordes | jonpry: sweet ! |
| 17:12.28 | phh | (but connect it after boot) |
| 17:12.31 | dcordes | jonpry: on all the devices ? |
| 17:12.42 | dcordes | in htc-msm-2.6.28 |
| 17:12.43 | dcordes | 8 |
| 17:12.44 | dcordes | 7 |
| 17:12.45 | dcordes | lo |
| 17:12.46 | dcordes | l |
| 17:12.51 | phh | tested only on rhod, but shouldn't be hardware specific |
| 17:13.06 | jonpry | i dunno. it should but it won't work with devices with a different SND_VERS |
| 17:13.06 | dcordes | if you use the same adsp code.. |
| 17:13.21 | *** join/#htc-linux cbde (~bepe@p54992662.dip0.t-ipconnect.de) |
| 17:13.21 | jonpry | we can fix that though |
| 17:13.34 | phh | jonpry: bah, they all have different SND_VERS |
| 17:13.39 | dcordes | I tried to copy paste codeaurora alsa to htc-msm-2.6.32 branch for leo use |
| 17:13.43 | dcordes | couldn't get it to compile so far |
| 17:13.59 | dcordes | cause the qdsp6 is so different |
| 17:13.59 | phh | downgrade to 2.6.27 and use jonpry's code ? :D |
| 17:13.59 | *** join/#htc-linux dieselboy (~dieselboy@dsl-69-172-104-216.acanac.net) |
| 17:14.06 | phh | ah right qsd6. |
| 17:14.15 | jonpry | lol |
| 17:14.16 | phh | dcordes: use CA's qdsp6 ? |
| 17:14.20 | Alex[sp3dev] | damn. sound/msm/... doesn't look nice |
| 17:14.33 | phh | I don't think there is anything AMSS-specific in it anymore |
| 17:15.27 | jonpry | .27 is obviously a superior kernel |
| 17:15.50 | jonpry | pinnacle of opensource |
| 17:15.55 | phh | because .27 > .32 |
| 17:15.57 | dcordes | phh: we currently use heavily patched android-msm-2.6.32 qdsp6 |
| 17:16.21 | Alex[sp3dev] | phh: have you pushed to gitorious as well? or not yet |
| 17:16.26 | phh | Alex[sp3dev]: not yet |
| 17:16.32 | phh | Alex[sp3dev]: I was checking it builds |
| 17:17.00 | phh | jonpry: theorically there is no problem in adding it in deconfig ? |
| 17:17.07 | Alex[sp3dev] | still i don't get why some stuff got into /sound/msm dir. was it like that in original source? |
| 17:17.21 | phh | I might have done that. |
| 17:17.26 | phh | Alex[sp3dev]: pushed to gitorious |
| 17:17.47 | jonpry | er. i did that |
| 17:17.50 | jonpry | delete |
| 17:17.56 | Alex[sp3dev] | phh: i am sure it is wrong. like, aoa should be in /sound |
| 17:17.59 | phh | jonpry: no, Alex[sp3dev] has the tree before your change ;) |
| 17:18.28 | Alex[sp3dev] | my tree is probably 2 weeks behind mainline |
| 17:18.45 | phh | jonpry: that's most likely me :p |
| 17:18.52 | phh | i'm still wondering how the hell I've done that |
| 17:19.02 | Alex[sp3dev] | phh: just move everything from msm one level up |
| 17:19.05 | jonpry | i remember doing it |
| 17:19.17 | phh | Alex[sp3dev]: no, just remove it |
| 17:19.17 | jonpry | just delete the stuff in msm. no good |
| 17:19.40 | Alex[sp3dev] | phh: why remove? i think the other alsa parts will be incomplete |
| 17:19.54 | phh | Alex[sp3dev]: uh ? I don't think so |
| 17:19.57 | phh | everything seems there |
| 17:20.02 | CIA-109 | htc-linux: phhusson htc-msm-2.6.27 * rv2.6.27-1158-g627b464 /arch/arm/configs/htc_msm_android_defconfig: Enable ALSA by default |
| 17:20.04 | Alex[sp3dev] | phh: let me have another look |
| 17:20.10 | *** join/#htc-linux SVic_ (~SVic@ip128.117.dars-ip.ru) |
| 17:20.35 | *** join/#htc-linux zycho (~zycho@f055246150.adsl.alicedsl.de) |
| 17:20.45 | phh | next glemsom build shouold have alsa :-) |
| 17:20.52 | Alex[sp3dev] | phh: look, the makefile, kconfig, core dir and other stuffs are in msm |
| 17:21.08 | phh | Alex[sp3dev]: easier. Read sound/Makefile |
| 17:21.12 | phh | no reference to the msm subdir in there. |
| 17:21.37 | Alex[sp3dev] | yes. i mean, part of /sound was moved to msm, not copied there |
| 17:21.51 | phh | there is definitely a Makefile in /sound/ |
| 17:21.56 | phh | perhaps not in your rev though |
| 17:22.06 | Alex[sp3dev] | then gitweb is wrong |
| 17:22.36 | jonpry | what happened. is that i downloaded a tar ball of codeaurora sound code and put it in msm while i copied things out |
| 17:22.46 | phh | SHIT |
| 17:22.48 | phh | I forgot half of the files |
| 17:22.54 | dcordes | jonpry: you should try SHR on rhodium |
| 17:22.57 | dcordes | with the alsa |
| 17:22.59 | Alex[sp3dev] | phh: :P |
| 17:23.18 | jonpry | then when done, i forgot to delete it. |
| 17:23.18 | phh | basically I pushed only new files :D |
| 17:23.21 | phh | not modified one |
| 17:23.29 | Alex[sp3dev] | phh: that is what i'm telling you |
| 17:24.08 | phh | damn that's such a mess -_-' |
| 17:24.21 | jonpry | dcordes: what is SHR? |
| 17:24.21 | Alex[sp3dev] | phh: can you just revert it and do it from scratch? |
| 17:24.28 | CIA-109 | htc-linux: phhusson htc-msm-2.6.27 * rv2.6.27-1159-g4078d9a / (1285 files in 155 dirs): Missing update files |
| 17:24.28 | phh | Alex[sp3dev]: baaah no. |
| 17:24.46 | phh | Alex[sp3dev]: it's a big mess whatever we do so .... |
| 17:24.57 | jonpry | you can revert it |
| 17:25.01 | dcordes | jonpry: it is based on openembedded |
| 17:25.02 | xUmaRix | camro:with ur rootfs i cant find home key |
| 17:25.11 | phh | jonpry: I know, but it's still a big mess anyway |
| 17:25.13 | phh | even if done "properly" |
| 17:25.21 | dcordes | jonpry: uses a fast EFL (enlightenment) GUI and freesmartphone.org phone API |
| 17:25.25 | *** join/#htc-linux pipomolo42 (~alex@home.boeglin.org) |
| 17:25.29 | camro | so, the problem is also with my rootfs ? |
| 17:25.36 | Alex[sp3dev] | phh: ok, does it build now? |
| 17:25.43 | jonpry | how do i do that? apt-get? |
| 17:25.43 | camro | then the problem was a corrupted install of any app |
| 17:25.46 | phh | Alex[sp3dev]: yes it always built with jonpry's stuff |
| 17:25.51 | phh | the problem is only to commit correctly :p |
| 17:26.16 | Alex[sp3dev] | phh: damn, commit my kovsky panel driver) |
| 17:26.19 | *** join/#htc-linux kain144000 (47a73399@gateway/web/freenode/ip.71.167.51.153) |
| 17:26.22 | dcordes | jonpry: you could grab an SHR rootfs for the htc dream as it is your same SoC |
| 17:26.33 | phh | Alex[sp3dev]: yes, but where is it ? :p |
| 17:26.42 | kain144000 | Hey, everyone. I've a quick question... |
| 17:26.46 | dcordes | jonpry: http://www.htc-linux.org/wiki/index.php?title=DreamBuilds |
| 17:27.09 | dcordes | jonpry: http://build.shr-project.org/shr-unstable/images/htcdream/shr-lite-eglibc-ipk--20100827-htcdream.rootfs.tar.gz this seems like the latest |
| 17:27.10 | Alex[sp3dev] | phh: http://pastebin.com/XyHxy1Br |
| 17:27.24 | jonpry | what about modules? |
| 17:27.29 | dcordes | jonpry: you'll need to edit /etc/X11/xorg.conf |
| 17:27.39 | phh | Alex[sp3dev]: ah right, it went in my todolist and my browser crashed |
| 17:27.55 | kain144000 | If I'm running the latest android 2.2 (Froyo) build from Project Android, are the Eclair rootfs and initrd.gz updates from XDAndroid applicable? |
| 17:28.40 | phh | yes |
| 17:28.45 | phh | errrr |
| 17:28.50 | phh | i'm not sure what project android is |
| 17:28.54 | phh | reefermattness' stuff? |
| 17:29.08 | kain144000 | Project Android @ http://sites.google.com/site/androidport/home |
| 17:29.19 | kain144000 | Yeah, refermattness. |
| 17:29.27 | jonpry | how to catch your phone on fire with 3 easy clicks |
| 17:29.28 | phh | yeah that's fine |
| 17:29.40 | phh | Alex[sp3dev]: ok, now it should build properly from git. |
| 17:30.23 | kain144000 | I was unsure because, although the rootfs is the same size, the initrd from the Eclair updates is always significantly smaller. |
| 17:31.46 | kain144000 | I'd really like to know what I'm doing without having to rely on build updates. Since you all sound pretty l337 with this $#17, could someone point me in the right direction to really [I]learn[/I] android? |
| 17:32.00 | jonpry | i wonder if when you throw your phone in the water to cool it off, if that voids the warranty |
| 17:32.16 | phh | jonpry: yes it does. |
| 17:32.35 | jonpry | f#@$ |
| 17:32.39 | DuperMan | jonpry: depends. is it sterilized waters? |
| 17:32.40 | DuperMan | :P |
| 17:32.43 | *** join/#htc-linux mayohead_ (~ethan@c-71-59-128-10.hsd1.wa.comcast.net) |
| 17:32.49 | phh | DuperMan: I don't think they make a difference :p |
| 17:32.56 | phh | jonpry: perhaps you could try oil ? :p |
| 17:32.59 | kain144000 | You should just put ice in a paper towel, as if you |
| 17:33.16 | jonpry | what if you drop it like its hot? |
| 17:33.23 | Alex[sp3dev] | at least if you don't throw it in the sea, you have a chance to get it working afterwards |
| 17:33.25 | kain144000 | 'd got a knot that you're tryin' to stop from swellin', and put that on the back of your tele. |
| 17:33.28 | DuperMan | bbl |
| 17:33.32 | phh | jonpry: wtf are you doing with it. |
| 17:33.59 | Alex[sp3dev] | he's overclocking in the toilet |
| 17:34.18 | phh | ah ok |
| 17:34.27 | phh | jonpry: you should try oilcooling |
| 17:34.28 | phh | definitely |
| 17:34.46 | jonpry | lol |
| 17:35.05 | jonpry | my house will be blazn after that experiment |
| 17:35.25 | kain144000 | So, where's the de facto site for android info, guys? Since, only one person knew what I'd meant by Project Android (reefermattness). |
| 17:36.26 | Alex[sp3dev] | ehm.. |
| 17:37.31 | kain144000 | Well, by that, I mean where you start for your android info, or are most of you devs. I don't mind doin' the reading, just lookin' for a sign post pointing me in the right direction. |
| 17:37.43 | Alex[sp3dev] | http://tinyurl.com/2cvhdsf |
| 17:37.57 | CIA-109 | htc-linux: lukas htc-msm-2.6.32 * rv2.6.29-38165-g95870ab /arch/arm/mach-msm/board-htcleo-keypad.c: htcleo: fix keypad |
| 17:37.58 | Alex[sp3dev] | i usually download there, from the first thread |
| 17:37.58 | CIA-109 | htc-linux: lukas htc-msm-2.6.32 * rv2.6.29-38166-g5e2869d /arch/arm/mach-msm/ (Kconfig Makefile board-htcleo-bkl.c board-htcleo-bl-led.c): htcleo: configuration for new backlight driver |
| 17:38.02 | CIA-109 | htc-linux: GNUtoo htc-msm-2.6.32 * rv2.6.29-38167-gb725a03 /arch/arm/mach-msm/board-htcleo-bl.c: |
| 17:38.02 | CIA-109 | htc-linux: htcleo: add backlight driver with standard API |
| 17:38.02 | CIA-109 | htc-linux: This patches the board-htclo-bkl.c (LED API)for use with the normal |
| 17:38.02 | CIA-109 | htc-linux: Linux backlight API. This enables backlight control in Linux distros |
| 17:38.03 | CIA-109 | htc-linux: like Ubuntu, SHR, etc. |
| 17:38.03 | CIA-109 | htc-linux: The Android compatbible LED driver is still selectable and default. |
| 17:38.04 | CIA-109 | htc-linux: lukas htc-msm-2.6.32 * rv2.6.29-38168-g65aefba /arch/arm/configs/ (htcleo-usbhost_defconfig htcleo_defconfig): htcleo: update defconfigs |
| 17:39.03 | kain144000 | 'cause I'm comin' from WinMo where everything was the registry settings, y'know? I;d like to translate my WinMo poweruse to android. |
| 17:39.05 | Alex[sp3dev] | turns out it's http://htcandroid.xland.cz/ |
| 17:39.10 | *** join/#htc-linux beeboobeeboo (~non@c-71-59-128-10.hsd1.wa.comcast.net) |
| 17:39.34 | camro | xUmaRix: please give me the link to the latest rootfs and i will try it on my phone ... |
| 17:40.19 | kain144000 | http://htcandroid.xland.cz/rootfs/rootfs-20100828-c29a486.zip |
| 17:40.34 | Alex[sp3dev] | kain144000: no, there is autobuilder |
| 17:41.11 | phh | Alex[sp3dev]: tried alsa yet ? |
| 17:41.17 | Alex[sp3dev] | phh: nope |
| 17:41.31 | kain144000 | OH!, woops. |
| 17:41.34 | Alex[sp3dev] | phh: just don't let your browser crash this time |
| 17:41.37 | *** join/#htc-linux LSnake (be35d3dc@gateway/web/freenode/ip.190.53.211.220) |
| 17:41.42 | phh | Alex[sp3dev]: muh ? |
| 17:41.44 | phh | what ? |
| 17:41.51 | Alex[sp3dev] | phh: commit the panel |
| 17:41.56 | phh | haha. |
| 17:41.59 | phh | i'd already forgotten |
| 17:42.09 | phh | Alex[sp3dev]: the toshiba AC100 is driving me crazy :D |
| 17:42.26 | Alex[sp3dev] | phh: what? |
| 17:42.32 | phh | Alex[sp3dev]: bah that's a smartbook |
| 17:42.38 | Alex[sp3dev] | phh: got that? |
| 17:42.42 | phh | and as soon as I see a news about it, I jump on it |
| 17:42.43 | phh | not yet |
| 17:42.52 | phh | it's not released in france yet |
| 17:42.52 | dcordes | phh: you have it ?? |
| 17:42.56 | phh | only to journalists |
| 17:43.09 | phh | I just want it. |
| 17:43.17 | dcordes | http://htc-linux.org/wiki/index.php?title=Airlife100 |
| 17:43.18 | kain144000 | Sorry, but what "commit the panel"? |
| 17:43.22 | Alex[sp3dev] | phh: no, i'd stick with my thinkpad xD |
| 17:43.26 | kain144000 | Sorry, for the n00b Q. |
| 17:43.38 | phh | dcordes: it's not that one -_-' |
| 17:43.45 | jonpry | phh: doesn't look like you enabled enough stuff in defconfig |
| 17:43.48 | phh | dcordes: toshiba AC100 is a tegra2 Cortex A9 1GHz kernel |
| 17:43.51 | phh | not the same thing :p |
| 17:43.51 | Alex[sp3dev] | kain144000: it means i'm asking him to upload my code for the panel to the main repository |
| 17:43.53 | phh | jonpry: ah ? |
| 17:43.56 | phh | oh |
| 17:43.58 | phh | let me guess. |
| 17:44.00 | phh | the userland stuff. |
| 17:44.19 | kain144000 | OH!, okay, thanks. |
| 17:44.37 | dcordes | phh: you can't buy non qualcomm and you know it |
| 17:44.45 | phh | dcordes: well |
| 17:44.51 | phh | I've been waiting for lenovo skylight for too long now |
| 17:45.00 | Alex[sp3dev] | phh: thinkpad r500 np75vrt is my 'smartbook'. too bad it only lasts 2 hours with opensource graphics drivers |
| 17:45.18 | phh | dcordes: and I've no laptop for school |
| 17:45.19 | phh | well ... |
| 17:45.24 | dcordes | phh: I bet you can get that airlife100 for few buks |
| 17:45.26 | phh | i've a 15minutes autonomy thing. |
| 17:45.28 | dcordes | think of it |
| 17:45.31 | dcordes | maybe I find one on ebay |
| 17:45.35 | Alex[sp3dev] | phh: ups? |
| 17:45.35 | phh | dcordes: qsd8250 <<<<<<<<< tegra2 :p |
| 17:45.43 | DuperMan | has a windows 7 tablet. had it for ages. hates how the term "tablet" got reappropriated to describe overgrown smartphones |
| 17:45.52 | phh | DuperMan: haha same here |
| 17:45.57 | dcordes | phh: same here. we should put laptop for student donate thread |
| 17:45.57 | phh | DuperMan: i've a TC1100 |
| 17:46.00 | jonpry | you need, SND, SND_SOC, SND_MSM_SOC,SND_MSM_SOC_DAI,SND_MSM_SOC_MSM7K |
| 17:46.00 | phh | dead battery but well |
| 17:46.01 | dcordes | bbiab |
| 17:46.27 | DuperMan | phh: great one. mine's the tx2000 - only thing the tx2 has on it is the 3100 ati |
| 17:46.38 | Alex[sp3dev] | damn i really should have bought the 'tablet' thinkpad with keyboard and rotating touchscreen.. but i chose this one because of wsxga+ screen and pcmcia |
| 17:47.52 | phh | DuperMan: well it's a geforce 4MX |
| 17:47.52 | phh | great for the price of this thing |
| 17:48.08 | phh | Alex[sp3dev]: hum i'm not sure |
| 17:48.15 | phh | after all, that's not that useful |
| 17:48.21 | DuperMan | phh: mine sports a geforce 6100m/go. Worst. GPU. Ever. |
| 17:48.28 | phh | I mean compared to a separate tablet without screen |
| 17:48.41 | phh | it depends on your use of course |
| 17:48.45 | DuperMan | wxvga's worth inferior processing power for graphics |
| 17:48.54 | Alex[sp3dev] | pah-nael, pan-noel, pownelll |
| 17:49.08 | DuperMan | pwn-hell |
| 17:49.10 | phh | jonpry: all of that are there |
| 17:49.17 | phh | but there is missing userland API |
| 17:49.30 | jonpry | ? |
| 17:49.43 | phh | jonpry: the config options you just gave are already there |
| 17:49.57 | jonpry | i just looked at the build log. msm-dai isn't built |
| 17:49.57 | phh | jonpry: but the "drivers" for /dev/snd/* devices aren't enabled |
| 17:50.23 | phh | not my fault then, DAI is definitely in the config |
| 17:50.44 | Alex[sp3dev] | phh: maybe one needs to register a platform device thingit? |
| 17:50.49 | Alex[sp3dev] | s/thingit/thingie |
| 17:51.10 | jonpry | nm, new build just posted. seems to have worked |
| 17:51.22 | phh | dcordes: ebay finds nothing with compaq airlife100 -_-' |
| 17:51.30 | phh | jonpry: ah ok |
| 17:51.36 | Alex[sp3dev] | phh: stop browsing porn sites there |
| 17:51.36 | phh | jonpry: but still won't work because of missing userland apis :p |
| 17:51.43 | phh | Alex[sp3dev]: what ? |
| 17:51.45 | jonpry | aplay? |
| 17:52.06 | jonpry | seems installed by default on rhobuntu |
| 17:52.21 | phh | I'd rather use mplayer :p |
| 17:52.36 | Alex[sp3dev] | phh: you're again fapping on laptops instead of pushing that fucking patch. |
| 17:52.51 | phh | Alex[sp3dev]: I'm pushing that patch. |
| 17:52.56 | jonpry | mplayer isn't in the package repo |
| 17:52.56 | phh | but git am complain |
| 17:53.04 | phh | jonpry: I've a debian sid in chroot. |
| 17:53.26 | jonpry | ooooo. does it work? |
| 17:53.31 | phh | yup |
| 17:53.38 | phh | I use quasselclient from debian |
| 17:53.53 | Alex[sp3dev] | you're a maniac |
| 17:53.57 | phh | no i'm not |
| 17:54.12 | phh | not until someone prove I'm one. |
| 17:54.18 | Alex[sp3dev] | then you're a geek |
| 17:54.28 | phh | mmmmmm |
| 17:54.35 | phh | it depends if it's the true geek or the geek as seen on t. |
| 17:54.37 | phh | tv* |
| 17:54.44 | *** part/#htc-linux kain144000 (47a73399@gateway/web/freenode/ip.71.167.51.153) |
| 17:54.53 | DuperMan | it blends, it plays crysis. |
| 17:54.59 | Alex[sp3dev] | the true nerdy geek with beard, old sweater and thick glasses |
| 17:55.10 | phh | Alex[sp3dev]: that's it. |
| 17:55.24 | phh | well I've shave recently |
| 17:55.26 | phh | like three days ago |
| 17:55.31 | Alex[sp3dev] | heretic |
| 17:55.38 | DuperMan | is shaving in front of the pc right now. spooky shit. |
| 17:55.49 | phh | Alex[sp3dev]: pushed |
| 17:55.58 | Alex[sp3dev] | celebrates |
| 17:56.24 | phh | lol |
| 17:56.30 | phh | get me the AC100 now. |
| 17:56.38 | phh | or the airlife if you want. |
| 17:56.39 | Alex[sp3dev] | phh: you failed |
| 17:56.43 | Alex[sp3dev] | or not? |
| 17:56.49 | phh | Alex[sp3dev]: why would have I fail ? |
| 17:56.55 | Alex[sp3dev] | where is board-htckovsky-panel.c? |
| 17:57.09 | phh | \o/ |
| 17:57.12 | CIA-109 | htc-linux: adobriyan htc-msm-2.6.27 * rv2.6.27-1160-gd2931fa / (4 files in 2 dirs): |
| 17:57.12 | CIA-109 | htc-linux: Fix kovsky's panel |
| 17:57.12 | CIA-109 | htc-linux: Signed-off-by: HUSSON Pierre-Hugues <phhusson@free.fr> |
| 17:58.05 | CIA-109 | htc-linux: phhusson htc-msm-2.6.27 * rv2.6.27-1161-gc114692 /arch/arm/mach-msm/board-htckovsky-panel.c: Push fail, as usual. |
| 17:58.10 | phh | adobriyan ? |
| 17:58.17 | Alex[sp3dev] | wtf is he? |
| 17:58.23 | phh | a push fail. |
| 17:58.34 | phh | I did git commit --author 'Alex[sp3dev]' |
| 17:59.11 | phh | okay it failed with the [ |
| 17:59.13 | Alex[sp3dev] | phh: now i'll be preparing a battery patch for you |
| 17:59.25 | phh | Alex[sp3dev]: ok |
| 17:59.28 | Alex[sp3dev] | phh: if you want, there is my real name in board-htckovsky-panel.c |
| 17:59.30 | phh | I just finish alsa :p |
| 17:59.33 | phh | ok |
| 17:59.45 | phh | will do next time :D |
| 17:59.59 | camro | xUmaRix: the buttons are working normal as always ... |
| 18:00.32 | camro | @ all: does anyone know a app where i can remap my harware buttons ? |
| 18:00.33 | xUmaRix | maybe i need to clean data.img |
| 18:00.40 | Alex[sp3dev] | stupid microp. i've been fighting with it for several hours. light sensor doesn't work, my led control code just locks it up. bad day. gotta mmutrace |
| 18:00.48 | xUmaRix | still cant get phone button to work |
| 18:00.51 | camro | ex: long press home key -> to execute a special application |
| 18:00.53 | Alex[sp3dev] | camro: vim + your .kl files? |
| 18:01.02 | camro | really ? |
| 18:01.05 | camro | *G |
| 18:01.08 | Alex[sp3dev] | ah, that'd be tricky |
| 18:01.12 | DuperMan | camro: you don't need an app. it's in /system/usr/hwkeymap or something like it |
| 18:01.13 | Alex[sp3dev] | executing special application |
| 18:01.19 | phh | Alex[sp3dev]: ah ? light sensor doesn't work ? |
| 18:01.19 | camro | well - we are talking here about linux *G - thats so easy ... |
| 18:01.24 | phh | it was working last time I tried it |
| 18:01.27 | camro | tried to manipulate the code *G |
| 18:01.32 | jonpry | what is microp anyways. a cpld? |
| 18:01.35 | camro | thanks Alex :) |
| 18:01.46 | Alex[sp3dev] | phh: to begin with, it has never worked on kovsky. i'm checking ultrashot's code |
| 18:01.54 | Alex[sp3dev] | microp is some kind of atmel avr |
| 18:02.31 | jonpry | just some kind? |
| 18:02.33 | camro | xUmaRix: you can try to check your kl files ... |
| 18:02.52 | jonpry | so an inspired person might be able to get its firmware? |
| 18:02.55 | Alex[sp3dev] | jonpry: well, i can look up the model |
| 18:03.08 | xUmaRix | in /system/usr/keychar ? |
| 18:04.02 | Alex[sp3dev] | well, on xperia it's atmega 48v |
| 18:05.56 | camro | Alex: is it really so easy to remap ex: "long press homekey" ? only via .kl file ? |
| 18:06.23 | Alex[sp3dev] | camro: it is easy to remap homekey to, say, end key. dunno about launching apps |
| 18:06.47 | Alex[sp3dev] | phh: what do you think about getting rid of ns_only stuff and manipulating bits, like winmo and dzo do |
| 18:06.52 | DuperMan | when's the autobuild coming?:( |
| 18:07.48 | *** join/#htc-linux Scepterr69 (~scepterr@ool-18b92277.dyn.optonline.net) |
| 18:07.49 | *** join/#htc-linux MACKIE|home (~MACKIE|ho@124.20.121.70.cfl.res.rr.com) |
| 18:11.27 | *** join/#htc-linux babijoee (~babijoee_@d110-33-162-133.sun801.vic.optusnet.com.au) |
| 18:13.08 | en1gma | i have a us cellular TP2 and was thinking about putting android on it. it is the CDMA version and not the GSM so im having difficulties finding the right guide |
| 18:15.20 | phh | jonpry: captnoord successfully bricked and fixed back its microp using its datasheet |
| 18:15.57 | jonpry | hmm. so he must have the firmware? |
| 18:16.38 | Alex[sp3dev] | who has broken bluetooth? |
| 18:16.57 | Alex[sp3dev] | why is it only working on 115200 for latest system? |
| 18:17.06 | camro | xUmaRix: EventHub( 1246): New keyboard: device->id=0x10002 devname='MSM Blackstone pad' propName='hw.keyboards.65538.devname' keylayout='/system/usr/keylayout/qwerty.kl' |
| 18:17.37 | phh | Alex[sp3dev]: not me. |
| 18:17.54 | phh | Alex[sp3dev]: sounds like broken hciattach |
| 18:18.16 | Alex[sp3dev] | yes, why is it broken? it should have not been touched once it worked |
| 18:18.53 | phh | well it hasn't been touched recently afaik |
| 18:19.16 | en1gma | can anyone tell me which version of android custom rom i can use with this us cellular (cdma) TP2? |
| 18:19.31 | phh | en1gma: any for TP2 |
| 18:19.45 | en1gma | the startup.txt is different i thought |
| 18:20.33 | en1gma | phh do you know anything abou tthat? |
| 18:20.37 | phh | en1gma: no |
| 18:20.38 | phh | well |
| 18:20.40 | phh | just the force_cdma thing |
| 18:21.16 | en1gma | i trying to google and read but most are for the other non cdma versions |
| 18:21.44 | phh | again |
| 18:21.45 | phh | it's the same. |
| 18:21.51 | phh | just a little change in startup.txt |
| 18:23.03 | en1gma | do you know a link i could read about unlocking this phone to make it work with gms and the sim card? |
| 18:23.30 | en1gma | i dont have service so i could prob switch to any carrier or gsm/cdma network if i could get that to work also |
| 18:23.33 | phh | wow, no clue |
| 18:23.37 | phh | ask on #xda-devs |
| 18:23.54 | phh | en1gma: are you sure it is even locked ? |
| 18:23.58 | phh | for the gsm part |
| 18:24.00 | en1gma | not really |
| 18:24.06 | phh | ask on #xda-devs :p |
| 18:24.13 | phh | (yes you've been redirected a lot today) |
| 18:24.40 | en1gma | i do have a few unactivated att/cingular sims.....i could try and activate one and see what happens |
| 18:25.04 | *** join/#htc-linux Sjuust (~jmeij@ip3e839a58.speed.planet.nl) |
| 18:25.13 | phh | en1gma: afaik, to go to gsm mode, just install android like it was a gsm phone :p |
| 18:25.23 | *** join/#htc-linux g55 (~g55@rgnb-5d87de2c.pool.mediaWays.net) |
| 18:25.51 | en1gma | right now im in wm6.5 and it shows us cellular logo when i boot device up |
| 18:26.00 | jonpry | phh: i found the locks about crashing microp. getting it into isp mode. but i don't see where he fixed it. i assume he just flashed a new spl. which seems to program it. |
| 18:26.06 | en1gma | can i stick an activated sim in this phone and it work with att? |
| 18:26.08 | jonpry | *logs |
| 18:26.17 | phh | jonpry: oh |
| 18:26.19 | phh | that's possiblr. |
| 18:26.20 | phh | e |
| 18:26.47 | phh | but I think it wasn't that |
| 18:27.05 | phh | en1gma: sounds so |
| 18:27.25 | camro | Alex: if i want to start and appl -> i must do it like: key 114 VOLUME_DOWN /data/bin/MotoNav |
| 18:27.43 | camro | is this correct ? |
| 18:27.56 | Alex[sp3dev] | camro: dunno |
| 18:28.17 | camro | oki |
| 18:31.51 | flagada | hey ! what's news in news files plz http://oe.netripper.com/files/htcleo_autobuild/?C=M;O=D |
| 18:32.10 | *** join/#htc-linux bartman` (~bart@tau.jukie.net) |
| 18:34.32 | ali1234 | flagada: http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=log;h=refs/heads/htc-msm-2.6.32 |
| 18:35.28 | flagada | thx ali1234 |
| 18:36.34 | flagada | just replace zimage , bcm, turn or more ? |
| 18:40.56 | flagada | im test |
| 18:41.42 | flagada | speed boot |
| 18:41.44 | flagada | :o |
| 18:42.37 | camro | sorry, ALex: but, do you know how i can start ex: Gallery3d via command line (want to use it for for kl file ?) |
| 18:42.59 | *** join/#htc-linux dieselboy (~dieselboy@dsl-69-172-104-216.acanac.net) |
| 18:43.02 | camro | i saw this somewhere (but startet with android only for 2 weeks ..) |
| 18:43.33 | Alex[sp3dev] | camro: no idea. either google for some kind of software to map keys, or we'll have to look into the sources and CM and make a hack for this |
| 18:43.52 | phh | baaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaahh |
| 18:44.04 | Alex[sp3dev] | phh: heard of a hack? |
| 18:44.14 | camro | hehe |
| 18:44.36 | camro | ALex mean a "patch" :) |
| 18:44.43 | Alex[sp3dev] | phh: are you afraid that after peeking into android code we will write worse code? |
| 18:44.56 | phh | no |
| 18:44.59 | phh | i'm just blind |
| 18:45.24 | camro | maybe this is an auto-script in irc client - hehe |
| 18:47.13 | phh | who knows. |
| 18:48.36 | dcordes | jonpry: 19:27 < jonpry> what about modules? <= in SHR ? |
| 18:49.05 | Alex[sp3dev] | basically gsm (or cdma) should work without modules as well as usb |
| 18:49.10 | jonpry | have to mod the rootfs? |
| 18:49.28 | jonpry | yeah for SHR |
| 18:49.30 | flagada | keypad dont work ,autobacklight dont work , charge dont work , screen not turn off :s |
| 18:49.31 | flagada | lol |
| 18:49.46 | jonpry | phone bursts into flames |
| 18:50.01 | Alex[sp3dev] | it's just powerfart |
| 18:50.40 | *** join/#htc-linux GNUtoo|laptop (~gnutoo@90.84.146.184) |
| 18:50.46 | *** join/#htc-linux flagada (58a1e24e@gateway/web/freenode/ip.88.161.226.78) |
| 18:50.48 | dcordes | jonpry: 'make ARCH=arm INSTALL_MOD_PATH=/where/my/shr/rootfs/rootdirectory/ modules_install' |
| 18:51.09 | jonpry | ah |
| 18:52.46 | *** join/#htc-linux Shadiku (~noe@94-23-154-153.kimsufi.com) |
| 18:54.23 | DuperMan | flaming phone is actually a feature |
| 18:54.47 | jonpry | here i thought you had to: find | grep -F ".ko" | xargs -I {} cp {} /where/my/shr/rootfs/lib/modules |
| 18:56.06 | jonpry | duperman, hw3d |
| 18:56.49 | DuperMan | jonpry: on a treo?:P I'm wayyyy outta touch with the current convo:) |
| 18:57.19 | jonpry | nm. j/k |
| 18:57.31 | DuperMan | ahhhh lol. so I did get it>< |
| 19:00.01 | dcordes | jonpry: make does it for you |
| 19:00.14 | dcordes | jonpry: it will install it into directory with kernel revision |
| 19:00.22 | dcordes | in /lib/modules/ |
| 19:03.56 | *** join/#htc-linux LakersEB (ad1ace4e@gateway/web/freenode/ip.173.26.206.78) |
| 19:08.05 | *** join/#htc-linux Timber (~Tim@86.56.42.159) |
| 19:20.42 | MACKIE|home | does "adb install" install an app just like if you were to click on it and install it manually? |
| 19:22.00 | *** join/#htc-linux gauner1986 (~Adium@ip-88-152-47-139.unitymediagroup.de) |
| 19:23.25 | *** join/#htc-linux skodde (~skodde@unaffiliated/skodde) |
| 19:25.07 | en1gma | i have us cellular htc TP2 and i want to put android on it...is there a current guide that has all the steps from the beginning? |
| 19:25.43 | jonpry | dude. just download the freakin blazn cab file. and check the box that says force cmda when you start it up |
| 19:26.22 | en1gma | who me? |
| 19:26.27 | gauner1986 | :D |
| 19:27.08 | jonpry | yes you |
| 19:27.29 | en1gma | i dont have to security unlock it or do a spl? |
| 19:27.42 | jonpry | nope |
| 19:27.59 | en1gma | link please |
| 19:28.10 | dcordes | HD2: acpuclk_set_vdd_level xxxx no regulator |
| 19:28.20 | dcordes | keep wondering what that is |
| 19:28.29 | MACKIE|home | en1gma : go check out ppcgeeks , theres an android section under the TP2 |
| 19:28.40 | en1gma | k |
| 19:28.41 | jonpry | http://sites.google.com/site/androidport/downloads |
| 19:28.55 | en1gma | thanks |
| 19:29.06 | dcordes | jonpry: you tried that stuff ? |
| 19:29.16 | *** join/#htc-linux dieselboy (~dieselboy@dsl-69-172-104-216.acanac.net) |
| 19:29.20 | jonpry | yeah, works good |
| 19:29.26 | *** join/#htc-linux pkirsche (~pkirsche@pD95F7E7A.dip.t-dialin.net) |
| 19:29.27 | dcordes | jonpry: lol rly ? |
| 19:29.45 | dcordes | GNUtoo|laptop: SHR seems to work ootb on rhodium |
| 19:29.47 | jonpry | that is the only froyo i know of |
| 19:29.47 | *** join/#htc-linux xawen (~Admin@pool-96-244-250-218.bltmmd.fios.verizon.net) |
| 19:29.51 | GNUtoo|laptop | ootb? |
| 19:29.59 | GNUtoo|laptop | hi jonpry |
| 19:30.10 | jonpry | docorded: sound? |
| 19:30.10 | jonpry | hi |
| 19:30.25 | Alex[sp3dev] | dcordes: did you test rhod yourself? |
| 19:30.28 | GNUtoo|laptop | I've some questions about sound on your device |
| 19:30.39 | GNUtoo|laptop | 1)which kernel you used |
| 19:30.43 | GNUtoo|laptop | 2) does it have some buffer underruns |
| 19:31.07 | GNUtoo|laptop | 3)can you look at big buck bunny? or is sound an issue ? try -ao null and -ao alsa |
| 19:31.19 | GNUtoo|laptop | 4)try -alsa, oss is much worse |
| 19:31.21 | dcordes | lol at the bunny |
| 19:31.25 | jonpry | .27. i haven't tried mplayer yet. but phh says it works. we do get some dma misses in qdsp5 |
| 19:31.32 | GNUtoo|laptop | hmmm |
| 19:31.33 | phh | jonpry: I've never said that |
| 19:31.36 | phh | I still have to properly boot -_-' |
| 19:31.37 | dcordes | jonpry: what you mean sound ? |
| 19:31.42 | GNUtoo|laptop | so you've got the same buffer underrun than me |
| 19:31.57 | jonpry | i said aplay? you said i prefer mplayer, i said does it work. you said yes |
| 19:32.06 | phh | I said that ? |
| 19:32.07 | phh | oops |
| 19:32.14 | GNUtoo|laptop | jonpry, anyway it should work |
| 19:32.28 | jonpry | dcordes, does sound work in SHR? |
| 19:32.56 | GNUtoo|laptop | jonpry, for me definitely yes |
| 19:33.07 | jonpry | GNUtoo|laptop: i haven't looked at it much. but we probably need to move adsp interrupt to fiq or something |
| 19:33.26 | GNUtoo|laptop | jonpry, what's that? |
| 19:33.30 | GNUtoo|laptop | I'm very interested |
| 19:33.31 | dcordes | jonpry: ask GNUtoo|laptop he is the SHR G1 dev along with leviathan |
| 19:33.46 | GNUtoo|laptop | isn't .fiq an assembly thing |
| 19:33.47 | GNUtoo|laptop | ? |
| 19:34.00 | GNUtoo|laptop | and mickeyl, and alain2210 |
| 19:34.05 | dcordes | GNUtoo|laptop: with your patch the backlight turns off now, but it won't wake up. |
| 19:34.12 | jonpry | its like super high priority interrupt. will take place even if another irq handler is running. uses its own register set so there is no stack save or restore |
| 19:34.20 | GNUtoo|laptop | dcordes, ??? |
| 19:34.26 | GNUtoo|laptop | jonpry, wow |
| 19:34.34 | GNUtoo|laptop | jonpry, I've another fix: |
| 19:34.44 | *** join/#htc-linux deetee73 (5692cd05@gateway/web/freenode/ip.86.146.205.5) |
| 19:34.45 | *** join/#htc-linux byrnsey88 (4cfcb2e7@gateway/web/freenode/ip.76.252.178.231) |
| 19:34.47 | dcordes | GNUtoo|laptop: the msm_fb.c fix |
| 19:35.01 | dcordes | GNUtoo|laptop: before screen blanked but bl was on. now it'S fully off |
| 19:35.06 | dcordes | GNUtoo|laptop: but it doesn't wake up |
| 19:35.21 | leviathan | the refreshthread is compatible with upstream and works |
| 19:35.22 | dcordes | <PROTECTED> |
| 19:35.22 | dcordes | + panel->unblank(panel); |
| 19:35.29 | GNUtoo|laptop | ah this one |
| 19:35.32 | GNUtoo|laptop | I'll look later |
| 19:35.32 | leviathan | but I don't get input from keyboard yet |
| 19:37.15 | GNUtoo|laptop | http://comments.gmane.org/gmane.linux.alsa.devel/75938 |
| 19:37.29 | *** join/#htc-linux kiozen (~kiozen@rgnb-5d87cf34.pool.mediaWays.net) |
| 19:38.08 | GNUtoo|laptop | hmmm |
| 19:38.18 | GNUtoo|laptop | dcordes, could you describe the issue again? |
| 19:38.29 | GNUtoo|laptop | jonpry, what do you think of theses 2 alsa patches? |
| 19:38.39 | dcordes | GNUtoo|laptop: hd2 doesn't wake up from suspend |
| 19:38.53 | GNUtoo|laptop | it should but not the screen |
| 19:38.56 | GNUtoo|laptop | so: |
| 19:39.01 | GNUtoo|laptop | 1)boot |
| 19:39.07 | GNUtoo|laptop | 2)screen is on |
| 19:39.13 | GNUtoo|laptop | 3)echo mem > /sys/power/state |
| 19:39.21 | GNUtoo|laptop | 4)echo on > /sys/power/state |
| 19:39.27 | GNUtoo|laptop | did you do that? |
| 19:39.36 | jonpry | GNUtoo|laptop: have you tried it? |
| 19:39.45 | GNUtoo|laptop | jonpry, the 2 patches? |
| 19:39.45 | dcordes | GNUtoo|laptop: yes but without the 4) |
| 19:39.50 | jonpry | yes |
| 19:39.56 | GNUtoo|laptop | dcordes, 4 is the only way to wakeup |
| 19:40.00 | dcordes | GNUtoo|laptop: how should I do 4) without interaction :( |
| 19:40.13 | dcordes | GNUtoo|laptop: ok I will try it timed with a bash script |
| 19:40.13 | GNUtoo|laptop | jonpry, the mmap permit to view big buck bunny but increase buffer underrun |
| 19:40.17 | GNUtoo|laptop | dcordes, usbnet ssh |
| 19:40.33 | GNUtoo|laptop | jonpry, so mmap does something |
| 19:40.47 | dcordes | GNUtoo|laptop: I wonder how gnome wakes up |
| 19:40.57 | GNUtoo|laptop | jonpry, but... I failed at making the 512 period size patch work |
| 19:41.05 | dcordes | GNUtoo|laptop: basically I need a program that watches input device and writes the on ? |
| 19:41.06 | GNUtoo|laptop | dcordes, remember it's an android kenrel |
| 19:41.10 | GNUtoo|laptop | dcordes, yes |
| 19:41.14 | GNUtoo|laptop | but not only |
| 19:41.21 | GNUtoo|laptop | dcordes, you also need 2 kenrel patches |
| 19:41.26 | dcordes | o no |
| 19:41.31 | GNUtoo|laptop | dcordes, that give userland the wakup reason |
| 19:41.37 | *** part/#htc-linux MACKIE|home (~MACKIE|ho@124.20.121.70.cfl.res.rr.com) |
| 19:41.43 | GNUtoo|laptop | dcordes, so when there is a call or a sms it goes out of suspend |
| 19:42.04 | GNUtoo|laptop | dcordes, if you don't have that you just loose calls |
| 19:42.25 | dcordes | GNUtoo|laptop: not critical now as alsa doesn't work yet |
| 19:42.30 | GNUtoo|laptop | dcordes, that is to say with only the program that watch nodes and that does echo on >/sys/power/state |
| 19:42.42 | GNUtoo|laptop | dcordes, with only that you can have suspend/resume but loose calls |
| 19:42.57 | GNUtoo|laptop | dcordes, for alsa you mean on your device? |
| 19:43.00 | dcordes | yes |
| 19:43.02 | GNUtoo|laptop | ok |
| 19:43.03 | dcordes | htcleo hd2 |
| 19:43.05 | *** join/#htc-linux dieselboy (~dieselboy@dsl-69-172-104-216.acanac.net) |
| 19:43.06 | GNUtoo|laptop | so do that |
| 19:43.10 | *** join/#htc-linux gauner1986 (~Adium@ip-88-152-47-139.unitymediagroup.de) |
| 19:43.18 | dcordes | do you know where I can find on > watchdog example ? |
| 19:43.31 | GNUtoo|laptop | try to find a gnome way to do that: |
| 19:43.42 | GNUtoo|laptop | echo on > /sys/power/state when pressing the power button |
| 19:43.45 | GNUtoo|laptop | in illume there is a way |
| 19:43.51 | GNUtoo|laptop | that way no program need to be made |
| 19:44.05 | GNUtoo|laptop | not sure if it works |
| 19:44.07 | dcordes | easy |
| 19:44.12 | GNUtoo|laptop | but it's easier and less time consuming |
| 19:44.19 | GNUtoo|laptop | and better integrated |
| 19:45.54 | dcordes | GNUtoo|laptop: does the unblank patch break android ? |
| 19:46.13 | GNUtoo|laptop | I bet so |
| 19:50.33 | *** join/#htc-linux manusfreedom (~manusfree@tra78-1-82-235-115-79.fbx.proxad.net) |
| 19:50.35 | dcordes | CONFIG_HTCLEO_FIX_SUSPEND |
| 19:50.39 | dcordes | -_- |
| 19:52.53 | *** join/#htc-linux gauner19861 (~Adium@ip-88-152-47-139.unitymediagroup.de) |
| 20:06.57 | *** join/#htc-linux SVic (~SVic@ip147.116.dars-ip.ru) |
| 20:22.53 | *** join/#htc-linux kvaster (~kvaster@vpn-e0.bas-net.by) |
| 20:24.06 | *** join/#htc-linux ShadowFoxBiH (~ShadowFox@255-184.126-70.tampabay.res.rr.com) |
| 20:27.33 | jonpry | GNUtoo|laptop: do you know more about this requirement for periodic interrupts? Is that actually the problem, or is it the missed dma. I'm thinking we could write a software pll to fix the periodicity of the interrupts. |
| 20:28.24 | phh | jonpry: ok, the requirement for playwav2 isn't only snd_set_device |
| 20:28.35 | jonpry | oh yeah |
| 20:28.36 | GNUtoo|laptop | jonpry, I don't know a lot about the requirements, there is nothing about that in the docs that I didn't read |
| 20:29.03 | GNUtoo|laptop | in other words I've only the source code as documentation |
| 20:29.18 | GNUtoo|laptop | and you must also known that I don't know the full driver by heart |
| 20:29.23 | jonpry | by means of this patch |
| 20:29.32 | GNUtoo|laptop | I debugged it with printks for mplayer and improved it a bit |
| 20:29.40 | *** join/#htc-linux dieselboyx (~dieselboy@dsl-69-172-104-216.acanac.net) |
| 20:29.41 | GNUtoo|laptop | what patch? |
| 20:29.44 | GNUtoo|laptop | the 512 thing? |
| 20:29.47 | jonpry | yeah |
| 20:29.54 | GNUtoo|laptop | I tried what the patch said |
| 20:30.04 | GNUtoo|laptop | I applied the mmap patch that I rebased |
| 20:30.16 | GNUtoo|laptop | converted big buck bunny at 8000Hz |
| 20:30.29 | GNUtoo|laptop | and no buffer underruns at all |
| 20:31.08 | phh | see /proc/asound/timers ? |
| 20:31.57 | jonpry | whats up with using timers as a fallback, does that work? |
| 20:32.27 | jonpry | phh: what else does playwav2 do? |
| 20:33.18 | phh | jonpry: well I'm not sure |
| 20:33.22 | phh | but I did what I said early |
| 20:33.24 | phh | snd.force_headset=1 |
| 20:33.26 | phh | and plugged headset |
| 20:33.34 | phh | and dmesg says "No sound endpoint found, can't set snd_device" |
| 20:33.48 | phh | (I think that's some message I added by myself some time before :D) |
| 20:34.05 | jonpry | looks like alsa has already beaten me to the software PLL |
| 20:34.28 | phh | hum, the only timer available to alsa is the 100Hz one |
| 20:34.39 | jonpry | http://www.alsa-project.org/~tiwai/alsa-sync.html |
| 20:34.46 | jonpry | see queue and sync slave |
| 20:35.01 | *** join/#htc-linux swc|666 (~neopwn@unaffiliated/swc666/x-4934821) |
| 20:35.21 | phh | we just need a 1kHz clock for alsa if 8kHz works |
| 20:35.25 | phh | I guess |
| 20:39.07 | jonpry | phh: what about 1khz? |
| 20:39.27 | phh | jonpry: current clock availlable to alsa (see /proc/asound/timers ) is 100Hz |
| 20:39.56 | jonpry | is that a problem? |
| 20:40.02 | phh | I don't know |
| 20:40.09 | phh | you were talking about periodic something |
| 20:40.13 | phh | so I was just guessing |
| 20:40.29 | phh | well what's the size of the buffer ? |
| 20:40.45 | phh | if size of buffer*frequency < bitrate, we've got the problem |
| 20:41.02 | *** join/#htc-linux jeos (~thejeos@84.123.186.211.dyn.user.ono.com) |
| 20:41.05 | jonpry | i don't think alsa uses that timer to fill the buffer |
| 20:41.19 | phh | right |
| 20:41.36 | phh | a stupid test would be to compile kernel at HZ=1kHz and see ? |
| 20:41.52 | phh | (I guess alsa's timer is kernel's HZ) |
| 20:41.59 | phh | (that makes a lot of guesses, I know) |
| 20:42.06 | jonpry | i guess. but i'm pretty sure alsa will feed audio into the buffer as fast as it is consumed. because you never know what time the sound card thinks it is |
| 20:42.35 | phh | true |
| 20:43.32 | *** join/#htc-linux cbde (~bepe@p54992662.dip0.t-ipconnect.de) |
| 20:43.36 | jonpry | and this might be where alsa blows up. because say you get like 10 adsp interrupts back to back. alsa will think time has suddenly jumperd forward, after being stopped for a long time |
| 20:45.15 | *** join/#htc-linux Alex[sp3dev] (~alex_dfr@86.110.163.19) |
| 20:45.20 | Alex[sp3dev] | hey phh |
| 20:45.31 | phh | Alex[sp3dev]: what have i forgotten this time ? |
| 20:45.42 | Alex[sp3dev] | nothing, just wanna suggest something |
| 20:46.40 | phh | like ? |
| 20:47.52 | Alex[sp3dev] | as i said, static constants in ns_only are wrong, we should set bits (wce sets bits one by one, not all at once. probably that matters). also, your 0xfffff000 bitmask is wrong (for example, for adsp it's 0x7ff6ff). so now i'll be testing with lots of code to manually set bits added to pc_clk_enable. i suggest that later we add bitmask as a new field to clock struct and use array of bitmasks to set bits rather than OR them into a single constant |
| 20:49.37 | phh | ***or*** |
| 20:49.41 | phh | we switch to rpc clocks |
| 20:49.45 | Alex[sp3dev] | nope |
| 20:49.45 | phh | (yes acl, I know you read that) |
| 20:50.06 | Alex[sp3dev] | it seems to me, rpc actually doesn't have support for all clocks |
| 20:50.21 | Alex[sp3dev] | wanna disassemble a 17 mbyte file? |
| 20:50.43 | phh | yeah.... not today, i'm hum, busy :D |
| 20:51.01 | *** join/#htc-linux cbde (~bepe@p54992662.dip0.t-ipconnect.de) |
| 20:51.18 | Alex[sp3dev] | ok. actually i think we can detect nand boot by a kernel param, right? so we can actually have all in one tree |
| 20:51.24 | phh | yup |
| 20:52.22 | Alex[sp3dev] | ok. now to the camera. your last commit said 'now we can talk to camera'. what was actually happening? could you read data from i2c? did userspace crash? |
| 20:53.28 | phh | Alex[sp3dev]: yup I can read/write from/to i2c |
| 20:53.40 | phh | what i've seen from bzo's stuff is it seems working |
| 20:53.47 | phh | but userspace is being idiot |
| 20:53.53 | Alex[sp3dev] | like what? |
| 20:54.01 | phh | well, it freezes |
| 20:54.10 | phh | but that's a known bug of libcamera incompatibilities |
| 20:54.13 | jonpry | Alex[sp3dev] rpc definitely does not set all clocks. |
| 20:54.35 | Alex[sp3dev] | phh: so what? anything we can do? |
| 20:54.52 | phh | Alex[sp3dev]: try different userlands |
| 20:55.04 | phh | try to see which phones has the same kernel driver as us |
| 20:55.08 | Alex[sp3dev] | phh: is there v4l driver? |
| 20:55.09 | phh | and use their userland drivers |
| 20:55.15 | *** join/#htc-linux PsiCoLeO (~leomal14@69.146.216.201.dsl.intelnet.net.gt) |
| 20:55.22 | phh | Alex[sp3dev]: yes but no |
| 20:55.28 | Alex[sp3dev] | explain |
| 20:55.30 | phh | Alex[sp3dev]: it still needs somehow the liboemcamera |
| 20:55.39 | Alex[sp3dev] | fucking android morons |
| 20:56.00 | phh | oh don't worry, you'll most likely see the same things on qualcomm chrome os things |
| 20:56.41 | phh | i'm waiting for meego things from codeaurora |
| 20:57.40 | Alex[sp3dev] | i really don't see why they want to hide code for crap like camera or other things which can be reversed by tracing in several hours.. ok, 3D is hard and may be a commercial secret, but why cameras and other stuff they buy from chinese manufacturers? |
| 20:57.52 | phh | Alex[sp3dev]: jpeg compression |
| 20:58.04 | Alex[sp3dev] | phh: meh.. is that a secret? |
| 20:58.09 | phh | sorry |
| 20:58.11 | phh | hardware jpeg compression. |
| 20:58.41 | phh | but still, the whole i2c controls are closed source |
| 20:58.44 | phh | which sounds mostly stupid |
| 20:58.55 | Alex[sp3dev] | but damn, they have a9. they could implement it like "write uncompressed stream to mem + x", "read uncompressed from mem + y" |
| 20:58.59 | phh | and all the adsp communication are done from there |
| 20:59.05 | phh | Alex[sp3dev]: yeah |
| 20:59.56 | Alex[sp3dev] | do you happen to know if front video cameras for voice calls are generally supported on any android devices? |
| 21:00.16 | phh | evo has a front camera |
| 21:00.22 | phh | but that's mostly all I can tell :p |
| 21:01.07 | Alex[sp3dev] | that's good. if we reverse hardware stuff, then we can even replace winmo with android. at least, hacking kernel is easier than userland stuff |
| 21:01.56 | phh | :D |
| 21:02.19 | Alex[sp3dev] | btw, FM radio is driving me mad. i've fucked for about an hour trying to run HtcMusic from tattoo and was tired of 'class not found' stuff. i think if i ever fix camera and power drain, i'll rewrite fm radio from scratch |
| 21:03.13 | jonpry | phh: you can't access mddi from a11? |
| 21:03.30 | phh | jonpry: isn't that what we do with the remote_write commands ? |
| 21:03.46 | phh | Alex[sp3dev]: ahum. |
| 21:03.49 | phh | Alex[sp3dev]: want some funny joke ? |
| 21:03.53 | Alex[sp3dev] | phh: yes |
| 21:04.14 | jonpry | i dunno |
| 21:04.15 | phh | Alex[sp3dev]: download any sense android rom |
| 21:04.24 | phh | the last time i've heard of them was klinux's on blackstone's thread |
| 21:04.29 | phh | they have fm just working. |
| 21:04.45 | phh | well perhaps not *any* sense android rom |
| 21:04.50 | phh | but some has it. |
| 21:04.50 | *** join/#htc-linux kiozen (~kiozen@rgnb-5d87cf34.pool.mediaWays.net) |
| 21:05.09 | Alex[sp3dev] | o rly? never saw fm on any sense rom. but if you're telling the truth, that's one pita less for my ass |
| 21:05.25 | *** join/#htc-linux deetee73 (5692cd05@gateway/web/freenode/ip.86.146.205.5) |
| 21:05.33 | phh | well, perhaps they broke it meanwhile |
| 21:05.38 | phh | but in like february it was working |
| 21:05.54 | Alex[sp3dev] | what sucks is that sense heavily depends on htc-patched android |
| 21:06.11 | phh | yeah |
| 21:06.16 | Alex[sp3dev] | what sucks more is that android is very ram-hungry. any way to optimize? |
| 21:06.16 | phh | FM needs to use btilp |
| 21:06.28 | phh | *or* to rewrite your own FM stack |
| 21:06.52 | phh | cr2 has documented some things for FM |
| 21:06.54 | *** join/#htc-linux Jack-E (~chatzilla@host86-153-182-168.range86-153.btcentralplus.com) |
| 21:06.56 | Alex[sp3dev] | well. rewriting might be a good idea since we could use it in non-android |
| 21:07.16 | phh | anyway, first get a sense rom |
| 21:07.26 | phh | then all you'll have to do is strace btilp to see what to do |
| 21:07.26 | Alex[sp3dev] | no, first get camera working |
| 21:07.32 | phh | ok :p |
| 21:11.02 | *** join/#htc-linux bmnbmn (44cc7f6b@gateway/web/freenode/ip.68.204.127.107) |
| 21:11.20 | bmnbmn | I heard theres a $200 bounty to get phh to start developing for the rhodium |
| 21:11.29 | phh | bmnbmn: what ? |
| 21:11.32 | phh | i'm already on the rhodium |
| 21:11.49 | bmnbmn | to remotivate him |
| 21:11.49 | phh | bmnbmn: or you read 6 months old bounty ? :p |
| 21:11.55 | phh | aah ? |
| 21:12.02 | bmnbmn | just joking around |
| 21:12.06 | phh | :( |
| 21:13.37 | Alex[sp3dev] | damn i hate that #ifdef CONFIG_MSM_AMSS_VERSION_WINCE in clock-wince and useless rpc calls. you know that it could be done more accurately? |
| 21:15.07 | Alex[sp3dev] | you add the kconfig option. like CFG_WCE. it defaults to y if CONFIG_MSM_AMSS_VERSION_WINCE. you add another option, CFG_ANDROID. it defaults to y if !CFG_WCE. then, you just compile clock or clock-wince in makefile according to CFG_ANDROID or CFG_WCE |
| 21:15.45 | phh | you know our sources won't ever work for !wince devices anyway ? |
| 21:15.55 | phh | well ... I wouldn't bet on it |
| 21:16.03 | *** join/#htc-linux C_h_r_i_s (~ja@dslb-084-057-090-215.pools.arcor-ip.net) |
| 21:16.08 | Alex[sp3dev] | then why keep lots of code that only makes files impossible to read? |
| 21:16.26 | phh | good point. |
| 21:16.32 | phh | you got some patches ? :p |
| 21:16.57 | phh | well, most of the time it's not really distirbing (OK don't look at my power_off commit.) |
| 21:17.31 | Alex[sp3dev] | phh: i can make patches. though i'll make them in a cleaner fashion like i suggested, because i think we'll move to .34 or even further once we fix camera, nand and rhodium interrupts |
| 21:19.14 | Alex[sp3dev] | oh stupid me. we don't even need kconfig mess |
| 21:19.31 | Alex[sp3dev] | you could just use obj-$(!CONFIG_MSM_AMSS_VERSION_WINCE) |
| 21:19.37 | phh | wow that works ? |
| 21:19.45 | Alex[sp3dev] | that should work |
| 21:19.57 | Alex[sp3dev] | actually boolean logic should work |
| 21:20.03 | Alex[sp3dev] | i'll test |
| 21:20.12 | phh | i'm pretty sure it won't |
| 21:20.21 | phh | CONFIG_MSM_AMSS_VERSION_WINCE is the string 'y' |
| 21:20.22 | Alex[sp3dev] | i'm pretty sure i'll hack it anyway |
| 21:20.28 | Alex[sp3dev] | nope |
| 21:20.32 | Alex[sp3dev] | it's boolean |
| 21:20.32 | phh | ok |
| 21:22.15 | Alex[sp3dev] | by the way, what does set_mdns_host_clock do? does it need the values from the big table or no if i set up clocks just inside of pc_clk_enable? |
| 21:23.55 | phh | which big table ? :D |
| 21:23.58 | phh | there are two |
| 21:24.06 | Alex[sp3dev] | yep, gsm and cdma))) |
| 21:24.10 | phh | ok three |
| 21:24.20 | Alex[sp3dev] | i mean, the one with indexes, ns etc, not the frequencies |
| 21:24.26 | phh | ok |
| 21:24.29 | phh | it just uses offset of it |
| 21:24.37 | phh | and writes the value of the frequency table to this offset |
| 21:24.45 | phh | (more or less I don't remember the details) |
| 21:25.22 | xUmaRix | playing mp3 just hang my phone |
| 21:28.23 | Alex[sp3dev] | so, basically. if i remove entries from clock_parameters (the table without frequencies), it means that msm_clk_get_params will return an empty struct, ns_only will equal to zero and md/ns will be set up as they should? |
| 21:28.51 | *** join/#htc-linux shu8i (~shu8i@78.104.102.78) |
| 21:29.23 | Alex[sp3dev] | nope, it'll miss the offset |
| 21:29.29 | Alex[sp3dev] | fucking fuck, this code is dirty |
| 21:29.31 | *** join/#htc-linux Jack-E (~chatzilla@host86-153-182-168.range86-153.btcentralplus.com) |
| 21:29.41 | phh | bah not really |
| 21:29.52 | phh | you might want to take a look at vogue's code. |
| 21:30.01 | phh | (for the definition of dirty) |
| 21:30.53 | Alex[sp3dev] | actually, their code is cleaner |
| 21:31.20 | Alex[sp3dev] | they're not doing the ns_only and idx stuff in both sdcc_host_clock and clk_enable, only in the latter |
| 21:33.25 | Alex[sp3dev] | i guess if my fellows at the university would see the thing, they'd be like OoOoOoo |
| 21:33.54 | phh | well the code sounds mostly logical to me |
| 21:34.01 | phh | only the ns_only part is a bit annoying |
| 21:34.26 | phh | but as its bits depend on which field you're talking about, there is way to factor |
| 21:34.27 | Alex[sp3dev] | it is logical, but i want to rework the thing completely to be 1. more like wince 2. not self-repeating |
| 21:34.33 | *** join/#htc-linux [acl] (~abel@cpe-69-203-141-229.si.res.rr.com) |
| 21:34.50 | [acl] | whats this i hear about a bounty to get phh to work again :-p |
| 21:35.04 | phh | [acl]: he said that's a fake |
| 21:35.17 | [acl] | shit i was ready to pledge a donation :-p |
| 21:35.28 | phh | lol |
| 21:35.46 | [acl] | Alex[sp3dev]: clock fun? |
| 21:35.53 | Alex[sp3dev] | now you know, my guess about default y if !CONFIG_STH was true. it works |
| 21:35.57 | Alex[sp3dev] | [acl]: yep |
| 21:36.09 | phh | Alex[sp3dev]: ok |
| 21:36.19 | phh | i'd like to understand how come this is possible |
| 21:36.23 | phh | but that would be for another day |
| 21:36.30 | Alex[sp3dev] | config MSM_AMSS_VERSION_ANDROID |
| 21:36.31 | Alex[sp3dev] | bool |
| 21:36.31 | Alex[sp3dev] | default y if !MSM_AMSS_VERSION_WINCE |
| 21:36.41 | phh | Alex[sp3dev]: yes in Kconfig I know it works |
| 21:36.45 | phh | you talked about Makefile |
| 21:36.51 | Alex[sp3dev] | in makefile it doesnt |
| 21:36.57 | phh | ok right |
| 21:37.00 | Alex[sp3dev] | but we can use android to compile clock.c |
| 21:37.17 | phh | right |
| 21:38.17 | [acl] | Alex[sp3dev]: i changed my clocks to dzo style.. needed it for nand .. try it out. but dont use the 30 if statements he had.. thats just barbarism |
| 21:39.51 | Alex[sp3dev] | [acl]: first i want to do it ghetto-style with 30 ifs, then i'll rework it so that instead of ns_only constant it will process the array of masks, setting bits independently |
| 21:40.32 | [acl] | Alex[sp3dev]: yes thats how it should be. |
| 21:41.13 | Alex[sp3dev] | [acl]: what is currently broken on nand compared to haret? |
| 21:41.55 | jonpry | i think we are missing a pcm clock |
| 21:42.06 | Alex[sp3dev] | but other stuffs work? |
| 21:42.15 | [acl] | jonpry: i dumped all the requests.. there is no call for pcm sound.. do you know what it should be set to ? |
| 21:42.18 | phh | jonpry: or I2S ? :p |
| 21:42.22 | Alex[sp3dev] | or adsp? |
| 21:42.24 | Alex[sp3dev] | or i2c? |
| 21:42.36 | [acl] | Alex[sp3dev]: we are missing incall sound right now .. but we havent tested since wozzer is on vacay |
| 21:42.43 | jonpry | no sound, out or in call. but adsp seems to work. and something is up with usb |
| 21:42.59 | jonpry | and i2c works |
| 21:43.09 | Alex[sp3dev] | but the rest is ok? i2c, keypad, mddi and the rest? |
| 21:43.18 | Alex[sp3dev] | wow, that's recursive |
| 21:44.15 | [acl] | Alex[sp3dev]: yeah works |
| 21:44.52 | phh | jonpry: do you know how we communicate with speaker ? |
| 21:45.00 | phh | analog outputs or i2s or pcm or something else ? |
| 21:45.05 | Alex[sp3dev] | i wonder what's the way to flash kernel without fucking up everything. guess we'll have to set up the correct partition layout (and set correct flags for mtd partitions) so that zimage and data partitions are rw, and the rest is ro |
| 21:45.08 | jonpry | i think pcm |
| 21:45.37 | jonpry | but i have no idea where earpiece is hooked up. there is an amp or sorts in msm, and one in pm |
| 21:45.44 | [acl] | Alex[sp3dev]: i have some code for clocks if it will help you get started. But its not with if statements :-( |
| 21:46.14 | Alex[sp3dev] | jonpry: about that gpios. haven't you found them by disassembly yet? |
| 21:46.22 | jonpry | poweramp is a pcm device. there is a small chance a1010 is in the way |
| 21:46.33 | *** join/#htc-linux Blizzzard (5e067a08@gateway/web/freenode/ip.94.6.122.8) |
| 21:46.36 | jonpry | we got a1010 to respond. it was hooked up to microp |
| 21:47.53 | Alex[sp3dev] | holy shit, i know what's essentially broken in set_mdns_host_clock |
| 21:48.06 | [acl] | lol |
| 21:48.15 | Alex[sp3dev] | we should call clk_enable from there rather than doing the same job in there |
| 21:48.23 | [acl] | pc_clk_enable |
| 21:48.30 | Alex[sp3dev] | yes |
| 21:49.08 | *** join/#htc-linux Kasjopaja (~Tina@p57BC053E.dip0.t-ipconnect.de) |
| 21:49.10 | [acl] | yes but thats assuming ur pc_clk_enable is top notch. you need to mod that |
| 21:49.22 | Alex[sp3dev] | you can forward a prototype |
| 21:49.44 | [acl] | Alex[sp3dev]: http://pastebin.com/1hJLZYbA |
| 21:50.01 | [acl] | this is what i use for my pc_clk_enable.. similar to dzo but no Ifs.. |
| 21:50.08 | [acl] | matches wince 99% |
| 21:50.20 | Alex[sp3dev] | now you'll kill me) |
| 21:50.30 | [acl] | you you may need to reenable the mdp |
| 21:50.42 | [acl] | my new one uses rpc for clocks but it needs to be worked out still |
| 21:50.43 | Alex[sp3dev] | http://pastebin.com/tm5wh3Cz |
| 21:51.17 | [acl] | weird values for pmdh .. is that kovsky only? |
| 21:51.36 | Alex[sp3dev] | oh, there's a typo in pdmh even |
| 21:51.49 | Alex[sp3dev] | that is for kovsky but should be for all |
| 21:52.01 | *** join/#htc-linux zozi (025099c4@gateway/web/freenode/ip.2.80.153.196) |
| 21:52.05 | [acl] | Alex[sp3dev]: yeah your values are different.. i forgot ur not rhod |
| 21:52.34 | Alex[sp3dev] | as far as i get it, something like amss or bl may set up some bits in pmdh and others, but generally, wince touches only 0x200 and 0x800 bits in there |
| 21:52.37 | Alex[sp3dev] | (that is 0xa00) |
| 21:53.41 | *** join/#htc-linux mickey|zzZZzz (~mickey@80.81.242.146) |
| 21:53.58 | [acl] | Alex[sp3dev]: take some clock dumps to compare.. i took em doing calls playing music all that stuff.. just random recording to study the beast |
| 21:54.01 | Alex[sp3dev] | send me you clkregim some time if you want me to check |
| 21:54.11 | Alex[sp3dev] | clock dumps are not the way to go |
| 21:54.24 | [acl] | Alex[sp3dev]: why? explain thyself |
| 21:54.57 | Alex[sp3dev] | you see, for pmdh you get 0xa19 on kovsky, 0xa00 on blackstone and like that. but actually, wince only sets 0xa00 bits. the rest, i think, comes from bootloader and we must never mess with those bits |
| 21:55.08 | Alex[sp3dev] | that's why the whole ns_only thing is flawed |
| 21:55.28 | jonpry | phh: wozzer reported a big pop through the speaker when we try to enable a1010 |
| 21:55.40 | phh | ok |
| 21:55.47 | phh | jonpry: I thought a1010 is only on the mic side |
| 21:55.54 | [acl] | Alex[sp3dev]: yeah correct.. but we dumped the values on nand version too. so we know what they are left at. |
| 21:56.13 | Alex[sp3dev] | [acl]: show me some nand clockpoop |
| 21:56.27 | jonpry | there is a dac in it |
| 21:56.28 | Alex[sp3dev] | and non-nand |
| 21:57.38 | [acl] | Alex[sp3dev]: i gotta go .. but this is what i use for rpc clocks .. for grp and the other simple stuff.. it works but id like to add more |
| 21:57.38 | Alex[sp3dev] | by the way. pdmh disable is using AND 0x3f ff fd ff (that is, clearing 0xfc000200) |
| 21:57.42 | [acl] | http://pastebin.com/dXB2FZxp |
| 21:58.01 | Alex[sp3dev] | [acl]: grp? i don't trust rpc for grp)) |
| 21:58.09 | [acl] | lol it does work |
| 21:58.22 | Alex[sp3dev] | how can you tell without interrupts |
| 21:58.35 | [acl] | clocks change how they should. |
| 21:58.55 | [acl] | anyways we can discuss later.. i really gotta go |
| 21:59.00 | Alex[sp3dev] | well.. maybe we should use that. if you find more rpc clocks. ok, bye |
| 21:59.07 | [acl] | bye |
| 22:02.08 | *** join/#htc-linux mRn (mRn@92-249-196-116.pool.digikabel.hu) |
| 22:02.10 | mRn | hi |
| 22:02.20 | jonpry | phh: i'm going to figure out how this crap is hooked up once and for all when i get my 18 wheeler hit phone in the mail :-) |
| 22:04.33 | xUmaRix | hw btn keep on getting messy for me.on ext2 partition i lost sleep key for hw end btn.call btn is just fine |
| 22:08.28 | *** join/#htc-linux LordDeath_ (~LordDeath@cable-81-173-164-38.netcologne.de) |
| 22:15.37 | *** join/#htc-linux PsiCoLeO (~leomal14@69.146.216.201.dsl.intelnet.net.gt) |
| 22:15.40 | *** join/#htc-linux dieselboy (~dieselboy@dsl-69-172-104-216.acanac.net) |
| 22:22.34 | *** join/#htc-linux cbde (~bepe@p54992662.dip0.t-ipconnect.de) |
| 22:31.58 | Alex[sp3dev] | anyone alive here? |
| 22:32.26 | Alex[sp3dev] | i wonder if it is totally necessary to move clock_init out of map_io for nand |
| 22:32.39 | GNUtoo|laptop | dcordes, ping in #openmoko-cdevel |
| 22:32.41 | *** join/#htc-linux Dough29 (~Damien@ARennes-352-1-32-107.w83-195.abo.wanadoo.fr) |
| 22:38.43 | *** join/#htc-linux zycho (~zycho@p54834225.dip.t-dialin.net) |
| 22:43.24 | *** join/#htc-linux infernix (nix@unaffiliated/infernix) |
| 22:50.58 | *** join/#htc-linux PsiCoLeO (~leomal14@69.146.216.201.dsl.intelnet.net.gt) |
| 22:55.50 | en1gma | i have the cdma TP2....i seen a website that listed what was working and what isnt working for froyo 2.2....but i lost it....it said that the rendering was in software mode......anyone have that link by any chance? |
| 22:56.26 | dcordes | what link |
| 22:56.28 | Alex[sp3dev] | if you want rendering in sw mode, just remove /system/lib/egl/libGLES_qcom.so |
| 22:56.36 | dcordes | lol |
| 22:56.58 | en1gma | no...i dont want that.....the website i seen said it was not working in hardware mode.....and was only working in software mode |
| 22:57.05 | en1gma | guess that link wasnt the latest was it... |
| 22:57.06 | Alex[sp3dev] | yes, that is true |
| 22:57.13 | dcordes | ~blueangel |
| 22:57.38 | Alex[sp3dev] | blueangel is like, what i never had)) |
| 22:57.40 | en1gma | it showed the latest fixes and items that were still not fixed. |
| 22:58.13 | dcordes | Alex[sp3dev]: it's a pxa based htc |
| 22:58.27 | Alex[sp3dev] | dcordes: i know, a pxa260 one |
| 22:58.45 | dcordes | it's unkown to wiki :( |
| 22:58.53 | Alex[sp3dev] | until diamond appeared, it was the coolest phone.. there were not many with 128 ram |
| 22:59.24 | dcordes | there were cooler phones than ba before diamond :P |
| 22:59.30 | dcordes | like kaiser ! |
| 22:59.44 | Alex[sp3dev] | ah, forgot about that |
| 22:59.58 | dcordes | and the other msm7x00 |
| 23:00.37 | Alex[sp3dev] | i never took kaiser seriously because it was qvga. until i got xperia, i have always dreamed of sth like vga but on a small screen |
| 23:02.31 | Alex[sp3dev] | dcordes, can you clarify one thing for me |
| 23:02.58 | Alex[sp3dev] | in set_msns_host_clock, why do we walk the clock table from the highest frequency, not the lowest one? |
| 23:03.45 | en1gma | is there a specific thread just for cdma TP2 users wanting to put android on their phones? |
| 23:03.48 | dcordes | I fear I can't clarify that sorry |
| 23:04.10 | dcordes | en1gma: I bet there are plenty. Why don't you just take a look ? |
| 23:04.40 | en1gma | dcordes yea like i have not done that |
| 23:04.52 | en1gma | that would probably be why i asked "specific thread" |
| 23:05.18 | dcordes | yea |
| 23:11.55 | *** join/#htc-linux BazGee (~bazgraham@cpc1-sund2-0-0-cust716.11-1.cable.virginmedia.com) |
| 23:12.20 | xUmaRix | msm_hardware_blackstone_pad.vibrate=1 works ? |
| 23:12.44 | Alex[sp3dev] | look up the code. besides, you have the device |
| 23:13.21 | xUmaRix | im getting hw btn on the pad mess up |
| 23:17.38 | *** part/#htc-linux BazGee (~bazgraham@cpc1-sund2-0-0-cust716.11-1.cable.virginmedia.com) |
| 23:19.43 | xUmaRix | when i make call and then end it android freeze |
| 23:20.10 | Alex[sp3dev] | i can't help you.. not gotta call anyone at 3.20 am |
| 23:24.24 | xUmaRix | i just test end call on end btn working properly or not just hit call and end call btn to c it work |
| 23:25.13 | Alex[sp3dev] | go to spare parts, set "nothing" as end button behavior and test. i think it hangs because end key leads it to suspend |
| 23:28.05 | xUmaRix | will do |
| 23:29.45 | *** join/#htc-linux rhody (484ea5d7@gateway/web/freenode/ip.72.78.165.215) |
| 23:30.38 | xUmaRix | guess thats the culprit |
| 23:31.14 | Cass | hey dcordes, whats the latest commits all about ? |
| 23:33.24 | Alex[sp3dev] | well, no hangs here |
| 23:33.36 | xUmaRix | but phone make me hang |
| 23:33.45 | xUmaRix | hmm ni proper wipe i guess |
| 23:33.52 | Alex[sp3dev] | phone makes you hang? |
| 23:34.29 | xUmaRix | i hit phone then input some random number without clicking send it just hang |
| 23:34.47 | xUmaRix | izzit sound module change ? |
| 23:34.56 | Alex[sp3dev] | looks like a bad android build |
| 23:42.46 | *** join/#htc-linux Dough29 (~Damien@ARennes-352-1-32-107.w83-195.abo.wanadoo.fr) |
| 23:44.10 | *** join/#htc-linux Major_Sarcasm (~chatzilla@79-73-30-253.dynamic.dsl.as9105.com) |
| 23:46.52 | *** part/#htc-linux cbde (~bepe@p54992662.dip0.t-ipconnect.de) |
| 23:52.40 | bmnbmn | aaaaa |
| 23:54.50 | *** join/#htc-linux BlackRhino (~BlackRhin@c-71-63-195-232.hsd1.mn.comcast.net) |