| 00:07.50 | Kevin2 | ali1234: Sounds useful. |
| 00:08.17 | Kevin2 | As cr2 mentioned, there is already some code for uart. It would be nice to get it working in the same way the framebuffer code works. |
| 00:08.28 | ali1234 | how is that? |
| 00:08.52 | Kevin2 | As for tftp - it sounds nice. Though, it's probably easier to just teach haretconsole/haret how to transfer a file through the telnet window. |
| 00:09.51 | ali1234 | do you know eol? we did a patch for that to setup the uart on omap |
| 00:10.05 | Kevin2 | ali1234: The framebuffer code? If you look in haret now, you'll see it can do "fb_printf" calls - it would be cool to extend that so it could also write to a uart. |
| 00:10.17 | Kevin2 | ali1234: No - I've not heard of eol. |
| 00:10.28 | ali1234 | ok, that's easy, it's 8250 compatible here |
| 00:10.42 | ali1234 | just write chars to the address |
| 00:10.50 | ali1234 | tricky part is setting up the clocks + muxing |
| 00:11.05 | ali1234 | eol is a bootloader that loads after SPL, before/instead WM |
| 00:12.23 | ali1234 | this is the eol code: http://pastebin.com/f384213a3 |
| 00:12.28 | ali1234 | where would i add it to haret? |
| 00:14.07 | Kevin2 | ali1234: You're going to need to read through the haret code - start at src/mach/arch-omap.cpp, src/linboot.cpp, and src/fbwrite.cpp. |
| 00:14.36 | ali1234 | ok thanks |
| 00:14.48 | *** join/#htc-linux thedicemaster (n=thedicem@j89051.upc-j.chello.nl) |
| 00:26.56 | *** join/#htc-linux swc|666 (n=infidel2@unaffiliated/swc666/x-4934821) |
| 00:57.04 | *** join/#htc-linux rafyvitto3 (i=rafyvitt@24.54.253.34) |
| 01:00.52 | *** join/#htc-linux x29a_ (n=x29a@unaffiliated/x29a) |
| 01:37.30 | *** join/#htc-linux MethoS- (n=clemens@134.102.106.250) |
| 02:21.26 | *** join/#htc-linux SOG (n=SOG@n219073041038.netvigator.com) |
| 02:23.08 | *** join/#htc-linux LTxda (n=anon@unaffiliated/ltxda) |
| 02:25.56 | *** join/#htc-linux Guest977 (i=kdub@h43.66.135.98.ip.windstream.net) |
| 02:39.10 | *** join/#htc-linux mdrobnak (n=mdrobnak@98.116.165.7) |
| 02:47.16 | *** join/#htc-linux root2 (n=root@rgnb-5d874fc3.pool.mediaWays.net) |
| 03:00.00 | *** join/#htc-linux Vinz0r (n=vinz@58.166.240.48) |
| 03:05.18 | Vinz0r | <PROTECTED> |
| 03:07.04 | ali1234 | this is pretty much it these days |
| 03:07.34 | ali1234 | maybe #xda-devs too |
| 03:09.08 | Vinz0r | alrighty, thanks mate |
| 03:37.17 | *** join/#htc-linux AstainZZZZZZ (n=AstainHe@unaffiliated/astainhellbring) |
| 03:52.46 | *** join/#htc-linux Amaranth_ (n=travis@ubuntu/member/Amaranth) |
| 03:59.23 | *** join/#htc-linux Vinz00r (n=vinz@CPE-58-166-240-48.sa.bigpond.net.au) |
| 04:26.09 | *** join/#htc-linux marcin88 (n=marcin@chello089078160132.chello.pl) |
| 04:57.38 | *** join/#htc-linux Guest977 (i=kdub@96.13.42.181) |
| 05:17.03 | *** join/#htc-linux randomblame (n=kevin@c-71-59-176-188.hsd1.wa.comcast.net) |
| 05:18.33 | randomblame | hola |
| 05:29.23 | *** join/#htc-linux GlemSom (n=glemsom@0x5da34bca.cpe.ge-1-1-0-1105.sdnqu1.customer.tele.dk) |
| 06:01.19 | *** join/#htc-linux BHSPitLappy (n=BHSPitLa@unaffiliated/bhspitmonkey) |
| 06:16.10 | *** join/#htc-linux mrmoku (n=mrmoku@ppp-88-217-25-150.dynamic.mnet-online.de) |
| 06:20.14 | GlemSom | hmm, I don't quite understand how git works.. I thought "git clone git://git.linuxtogo.org/home/groups/mobile-linux/kernel.git -o htc-msm-2.6.27" would give me the latest snapshot, using the htc-msm-2.6.27 head... Apparently it seems to give me a snapshot without any of the updates at all.. |
| 06:21.05 | Vinz00r | the newest snapshot is prolly on your PC, but it depends where your 'git' is pointing to at the moment! |
| 06:21.12 | Vinz00r | (i don't remember the exact syntax) |
| 06:21.34 | Vinz00r | but you need to say to git that you want to be pointing at 'head' |
| 06:43.53 | *** part/#htc-linux tehbla (i=marketta@static.177.79.46.78.clients.your-server.de) |
| 07:13.45 | *** join/#htc-linux MrPippy (n=pip@adsl-75-37-166-70.dsl.sndg02.sbcglobal.net) |
| 07:31.50 | *** join/#htc-linux kiozen (n=kiozen@rgnb-5d87c8ca.pool.mediaWays.net) |
| 07:45.16 | *** join/#htc-linux kvaster_ (n=kvaster@93.84.112.80) |
| 08:43.21 | *** join/#htc-linux BabelO (n=fcr@unaffiliated/babelo) |
| 08:53.35 | *** join/#htc-linux droid001 (n=g1@p4FDCE7F0.dip.t-dialin.net) |
| 08:55.31 | *** join/#htc-linux balans (n=Administ@212-123-149-239.ip.telfort.nl) |
| 09:16.56 | LeStatV | Hi everybody |
| 09:17.23 | LeStatV | Is anybody know, last kernel runs ok? |
| 09:17.57 | *** join/#htc-linux MethoS- (n=clemens@134.102.106.250) |
| 09:24.50 | *** join/#htc-linux Zinbolic (n=zinbolic@0x57390b26.hbnqu1.dynamic.dsl.tele.dk) |
| 09:51.38 | *** join/#htc-linux balans (n=Administ@212.123.149.239) |
| 10:00.57 | *** join/#htc-linux luc_ (n=luc@89-115-128-35.cl.ipv4ilink.net) |
| 10:14.36 | *** join/#htc-linux Squarc (n=Squarc@82-217-32-29.cable.quicknet.nl) |
| 10:18.21 | Captnoord | re |
| 10:19.34 | *** join/#htc-linux townkat (n=town@86.127.6.111) |
| 10:25.06 | *** join/#htc-linux StarLite (n=nnscript@s55916ca6.adsl.wanadoo.nl) |
| 10:55.55 | *** join/#htc-linux root2 (n=root@rgnb-5d874b17.pool.mediaWays.net) |
| 10:59.52 | *** join/#htc-linux luc_ (n=luc@89-115-128-35.cl.ipv4ilink.net) |
| 11:08.42 | *** join/#htc-linux luc_ (n=luc@89-115-128-35.cl.ipv4ilink.net) |
| 11:18.04 | *** join/#htc-linux balans (n=Administ@212.123.149.239) |
| 11:18.14 | LeStatV | Captnoord: hi, can U help me? |
| 11:24.32 | *** join/#htc-linux marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 11:28.38 | Captnoord | yo |
| 11:28.40 | Captnoord | with what |
| 11:31.17 | Captnoord | typ your question..... |
| 11:31.22 | Captnoord | and I will anwser when I get back |
| 11:31.23 | Captnoord | if I can |
| 11:32.20 | *** join/#htc-linux Untouchab1e (n=Untoucha@cm-84.209.89.86.getinternet.no) |
| 11:32.49 | *** join/#htc-linux Gnutoo (n=gnutoo@host142-40-dynamic.117-80-r.retail.telecomitalia.it) |
| 11:34.20 | Captnoord | yo Untouchab1e |
| 11:34.35 | Untouchab1e | Captnoord: hey |
| 11:35.00 | Captnoord | how's life? |
| 11:35.12 | Captnoord | nice stuff goingon on your website |
| 11:35.15 | Captnoord | very good stuff |
| 11:35.15 | Captnoord | :P |
| 11:35.58 | Captnoord | I think i'm going to try to fix my ubuntu |
| 11:35.59 | Captnoord | :P |
| 11:36.14 | Untouchab1e | hehe |
| 11:36.17 | Untouchab1e | Thanks |
| 11:36.23 | Untouchab1e | I am good :) And yourself? |
| 11:36.40 | Captnoord | I quit all my coding projects... except my personal one's |
| 11:36.48 | Captnoord | and I feel better than in a long while |
| 11:36.59 | Captnoord | maybe its because I am trying to please people |
| 11:37.08 | Captnoord | and now i'm only pleasing myself |
| 11:37.09 | Captnoord | so |
| 11:37.12 | Captnoord | going good |
| 11:37.48 | Captnoord | evemu has todo it without me for a while |
| 11:37.55 | Captnoord | untill I finished my school |
| 11:38.26 | Untouchab1e | haha |
| 11:38.32 | Untouchab1e | :P |
| 11:38.57 | Untouchab1e | I understand what you mean |
| 11:39.09 | Captnoord | its a so freaking complex monster... that only a few understand it really |
| 11:39.26 | Captnoord | and people consider me the "boss" and even I don't know everything |
| 11:39.28 | Captnoord | lol |
| 11:39.47 | Captnoord | I think I worked almost a year on it..... |
| 11:39.54 | Captnoord | and people just don't understand |
| 11:40.04 | Captnoord | just keep on coding crap |
| 11:40.05 | *** join/#htc-linux cr2 (n=cr2@109.84.6.66) |
| 11:40.14 | Captnoord | instead of redesigning |
| 11:40.19 | Captnoord | yo cr2 |
| 11:40.20 | Untouchab1e | hehe |
| 11:40.44 | Captnoord | its like I would code stuff here..... |
| 11:40.45 | Untouchab1e | I was Coms officer on a military maneuver a few weeks ago, and I decided to develop my own information handling software instead of using the one the army already had.. And it felt really good just focusing on developing that instead of everything else.. I fell off the Android project for a week or two though, but I got a really nice application that made the operation successfull! |
| 11:40.46 | cr2 | hi Captnoord |
| 11:41.01 | Captnoord | I just don't understand it.... so all I would do is do small fixes..... |
| 11:41.14 | cr2 | [ 833.965454] [RR] - ver=1 type=7 src=0:fffffffe crx=0 siz=20 dst=1:fffffffe |
| 11:41.16 | cr2 | [ 833.983795] audmgr_rpc_thread() start |
| 11:41.39 | Captnoord | src=0:-2 |
| 11:41.48 | Captnoord | dst=1:-2 |
| 11:42.15 | Captnoord | your sending a message to yourself? |
| 11:42.30 | Untouchab1e | We all appreciate the work you are doing though Captnoord ;) |
| 11:42.32 | Captnoord | Untouchab1e: nah I don't consider this work..... I consider this help..... |
| 11:42.43 | Untouchab1e | Captnoord: hehe, well thanks for your help then :) |
| 11:42.43 | cr2 | Captnoord: 0 to 1 |
| 11:42.48 | cr2 | [ 790.991180] [RPC] READ on ept c080ab00 (24 bytes) |
| 11:42.55 | cr2 | this can be more verbose ... |
| 11:43.11 | Captnoord | is this for the black? |
| 11:43.24 | cr2 | dst=1:c080ab00 |
| 11:43.29 | cr2 | no. raph100 |
| 11:43.32 | Captnoord | k |
| 11:43.45 | cr2 | blac is filled with agps |
| 11:43.58 | cr2 | never seen any sane blac rpc dump |
| 11:44.28 | Captnoord | let someone dump it with a rom where the agps is ripped out |
| 11:44.35 | cr2 | they should remove the gps .dlls from rom first :) |
| 11:44.43 | cr2 | yeah |
| 11:44.52 | cr2 | dst=1:c080ab00 |
| 11:46.16 | cr2 | [RR] x NEW_SERVER id=1:d78462e0 prog=3000005d:0 |
| 11:46.52 | Captnoord | cr2 what are you telling me? |
| 11:49.00 | Captnoord | you found a way to fix the hello hack? |
| 11:49.13 | cr2 | [ 834.697631] adsp: rpc event=0, proc_id=2, module=13, image=0 |
| 11:49.24 | LeStatV | cr2: hi |
| 11:49.43 | Captnoord | LeStatV: ask me... |
| 11:49.55 | cr2 | [ 834.783386] audpre: err_index 0 |
| 11:49.57 | cr2 | [ 834.792266] audpre: unknown event 1 |
| 11:49.58 | cr2 | [ 834.801086] audpre: unknown event 2 |
| 11:50.00 | cr2 | [ 834.809844] audpre: err_index 2 |
| 11:50.01 | cr2 | [ 834.818511] audpre: unknown event 1 |
| 11:50.17 | LeStatV | cr2: can U help me with finding address for AC97 resources for Toshiba G900? |
| 11:51.24 | LeStatV | Captnoord: can U help me with finding address for AC97 resources for Toshiba G900? |
| 11:51.45 | Captnoord | tell me what you got? |
| 11:52.08 | cr2 | LeStatV: which resources ? |
| 11:52.12 | cr2 | [ 834.519287] adsp: rpc event=0, proc_id=2, module=14, image=0 |
| 11:52.14 | cr2 | [ 834.538452] [RR] - ver=1 type=1 src=0:00000001 crx[ 846.476654] [RR] send control message cmd=6 srv.cmd=6 prog=00000001:c080a2c0 id=-1073427164:c004c928 |
| 11:52.22 | Captnoord | he neeeds mem addresses stuff |
| 11:52.41 | Captnoord | memmap |
| 11:52.46 | cr2 | the AC97 description is in the PXA manual |
| 11:53.28 | LeStatV | in module initialization of device I got: |
| 11:53.28 | LeStatV | static struct resource ac97_resources[] = { |
| 11:53.28 | LeStatV | <PROTECTED> |
| 11:53.28 | LeStatV | <PROTECTED> |
| 11:53.28 | LeStatV | <PROTECTED> |
| 11:53.29 | LeStatV | <PROTECTED> |
| 11:53.31 | LeStatV | <PROTECTED> |
| 11:53.33 | LeStatV | <PROTECTED> |
| 11:53.35 | LeStatV | <PROTECTED> |
| 11:53.37 | LeStatV | <PROTECTED> |
| 11:53.39 | LeStatV | <PROTECTED> |
| 11:53.41 | *** join/#htc-linux balans (n=Administ@212-123-149-239.ip.telfort.nl) |
| 11:53.41 | LeStatV | }; |
| 11:54.13 | Captnoord | LeStatV: your experienced with developing this stuff? |
| 11:54.13 | LeStatV | but when kernel loading - device is hang on ALSA loading |
| 11:54.34 | Captnoord | and does alsa give you info regarding why it hangs? |
| 11:55.19 | cr2 | LeStatV: do you configure the alt pins for AC97 ? |
| 11:55.27 | cr2 | #define RPCROUTER_CTRL_CMD_REMOVE_CLIENT 6 |
| 11:55.51 | LeStatV | I was added marks in code and there loop in getting IRQ |
| 11:56.03 | cr2 | union rr_control_msg { |
| 11:56.28 | LeStatV | cr2: where I must configure alt pins? |
| 11:56.34 | LeStatV | in headers? |
| 11:56.45 | cr2 | id is junk. that is good. |
| 11:57.03 | cr2 | LeStatV: it's gpio config. |
| 11:57.18 | LeStatV | Captnoord: I successfuly write FB and keyboard |
| 11:57.38 | LeStatV | cr2: yes, it's ok, I think |
| 12:01.53 | *** join/#htc-linux swc|666 (n=infidel2@unaffiliated/swc666/x-4934821) |
| 12:04.00 | *** join/#htc-linux balans (n=Administ@212-123-149-239.ip.telfort.nl) |
| 12:04.09 | townkat | cr2, did you find anyhting that could cause no sound on blac ? |
| 12:04.29 | cr2 | townkat: agps prevents any sensible debugging |
| 12:05.13 | cr2 | Captnoord: do you have BT headset ? |
| 12:05.16 | Captnoord | lol... i'm looking at the wrong... function... looking at the exit function |
| 12:05.17 | Captnoord | nope |
| 12:05.20 | Captnoord | hmmm |
| 12:05.28 | Captnoord | nope I really don't have it |
| 12:05.33 | Captnoord | I thought I did |
| 12:05.40 | Captnoord | unless I can use my laptop as a headset |
| 12:05.40 | Captnoord | :P |
| 12:05.47 | cr2 | i can't find mine. need to buy a new one ;) |
| 12:05.48 | *** join/#htc-linux balans (n=Administ@212-123-149-239.ip.telfort.nl) |
| 12:05.51 | Captnoord | \hehe |
| 12:07.07 | cr2 | i'd like to see an rpc dump with talking/playing sound over bt |
| 12:07.36 | Captnoord | cr2 I think that there are more messages than 8 |
| 12:08.08 | Captnoord | I think they go till 0x0C |
| 12:08.18 | Captnoord | but have to check that in the asm |
| 12:08.41 | cr2 | smem800-gps1 |
| 12:08.43 | cr2 | hehe |
| 12:08.47 | Captnoord | correct me if I;m wrong.... |
| 12:08.53 | Captnoord | the wince rpc stuff |
| 12:08.55 | Captnoord | sends this stuff |
| 12:08.56 | Captnoord | #define RPCROUTER_CTRL_CMD_REMOVE_CLIENT6 |
| 12:08.57 | Captnoord | with |
| 12:09.03 | Captnoord | xdr_send_enum? |
| 12:09.36 | cr2 | have not seen any others |
| 12:09.46 | Captnoord | k |
| 12:09.47 | cr2 | 1,(2),4,6,7 |
| 12:10.13 | Captnoord | I can't place them in the asm yet |
| 12:10.33 | Captnoord | but if I look at the exit_all_services |
| 12:10.41 | Captnoord | it loops trough all the services |
| 12:10.42 | Captnoord | and sends |
| 12:10.43 | Captnoord | #define RPCROUTER_CTRL_CMD_EXIT8 |
| 12:10.44 | Captnoord | to it |
| 12:10.48 | Captnoord | so |
| 12:10.51 | Captnoord | thats good |
| 12:11.19 | cr2 | ok |
| 12:11.34 | Captnoord | but I have the feeling i'm on the wrong track |
| 12:11.45 | cr2 | RPC_PreClose() and RPC_Close() ? |
| 12:11.57 | townkat | cr2, how is that? what does agps have to do with audio ? |
| 12:11.58 | Captnoord | wms_bc_mm_delete_all_services |
| 12:12.12 | Captnoord | the client dll |
| 12:12.47 | toer | cr2: i can dump it for you if you give the command |
| 12:12.50 | *** join/#htc-linux xperia (n=chatzill@77-56-88-110.dclient.hispeed.ch) |
| 12:12.55 | cr2 | townkat: it fills all RPC fifos with agps related data, so the sound commands are not visible |
| 12:13.03 | xperia | hello to all. |
| 12:13.05 | cr2 | toer: device ? |
| 12:13.53 | toer | raph100 |
| 12:14.01 | cr2 | toer: with BT headset ? |
| 12:14.11 | toer | indeed |
| 12:14.50 | *** join/#htc-linux thedicemaster2 (n=thedicem@j89051.upc-j.chello.nl) |
| 12:15.01 | cr2 | can you create multiple dumps. play sound, record sound, call/answer ? |
| 12:15.40 | cr2 | toer: pwf rpc-XXX 0x01f00000 0x100000 |
| 12:16.09 | cr2 | toer: pm me the data, because it will contain imei, phone numbers and such things. |
| 12:16.33 | cr2 | or you can extract the rpc data yourself |
| 12:16.46 | cr2 | and pastebin it |
| 12:17.21 | cr2 | od -A x -t x4 -w48 -j $((0x121ac+0x14)) -N $((0x2000)) rpc-XXX |
| 12:17.27 | cr2 | for the RX fifo |
| 12:17.42 | cr2 | od -A x -t x4 -w48 -j $((0x10198+0x14)) -N $((0x2000)) rpc-XXX |
| 12:17.50 | cr2 | for the TX fifo |
| 12:18.53 | *** join/#htc-linux Vinz0r (n=vinz@CPE-58-166-240-48.sa.bigpond.net.au) |
| 12:20.13 | xperia | a litlle intermezzeo. does anybody know how to extend the free memory on htc-kovsky ? if i put a higher value in default.txt as 79M in the haret file the kernel frezze. before booting. it dont even vibrate ! |
| 12:21.02 | cr2 | xperia: you need to know the memory map http://www.htc-linux.org/wiki/index.php?title=RaphaelMemoryMap |
| 12:22.21 | xperia | cr2: what for commands and steps are needed to research the memory map ? |
| 12:22.58 | cr2 | xperia: it's too long to describe |
| 12:23.19 | cr2 | try to compare your data with the raph table |
| 12:24.44 | townkat | cr2, cant agps be stopped ? |
| 12:31.10 | *** join/#htc-linux Vinz00r (n=vinz@CPE-58-166-240-48.sa.bigpond.net.au) |
| 12:36.33 | *** join/#htc-linux balans (n=Administ@212-123-149-239.ip.telfort.nl) |
| 12:39.59 | *** join/#htc-linux dwaradzyn (n=chatzill@chello089079067084.chello.pl) |
| 12:40.53 | dwaradzyn | cr2: hi. hopefully this time i killed agps. rpc dump is at http://rapidshare.com/files/282184616/blac100.rar |
| 12:41.48 | cr2 | dwaradzyn: can you do this : |
| 12:41.51 | cr2 | [14:17] <cr2> od -A x -t x4 -w48 -j $((0x121ac+0x14)) -N $((0x2000)) rpc-XXX |
| 12:41.53 | cr2 | [14:17] <cr2> for the RX fifo |
| 12:41.54 | cr2 | [14:17] <cr2> od -A x -t x4 -w48 -j $((0x10198+0x14)) -N $((0x2000)) rpc-XXX |
| 12:41.55 | cr2 | [14:17] <cr2> for the TX fifo |
| 12:42.57 | Gnutoo | cr2, hi cr2 |
| 12:43.20 | Gnutoo | cr2, with your dd command : /dev/mem: read error: Bad address |
| 12:44.02 | *** join/#htc-linux root2 (n=root@rgnb-5d87dfa0.pool.mediaWays.net) |
| 12:46.13 | cr2 | Gnutoo: yes. /dev/mem is not working |
| 12:46.44 | Gnutoo | cr2, so what should we do...should I try to finish my buggy c program that counts in hex in order to include in in devmem2? |
| 12:48.17 | dwaradzyn | cr2: rpc-XXX is my rpc dump file? |
| 12:48.59 | xperia | dwaradzyn: yes |
| 12:49.49 | cr2 | Gnutoo: probably the easiest thing to do. |
| 12:50.06 | Gnutoo | ok |
| 12:52.51 | dwaradzyn | cr2: RX and TX are in http://rapidshare.com/files/282189379/blac100.rar |
| 12:53.28 | LeStatV | cr2: so can u help me with address for AC97? |
| 12:55.45 | *** join/#htc-linux root2 (n=root@rgnb-5d87dfa0.pool.mediaWays.net) |
| 12:58.04 | cr2 | LeStatV: there is nothing wrong with the address, i think |
| 12:59.01 | LeStatV | so why alsa loops in IRQ module? |
| 13:00.43 | LeStatV | in pxa2xx-ac97-lib.c in funciton pxa2xx_ac97_irq |
| 13:23.17 | *** join/#htc-linux eway (n=eway@78-86-162-166.zone2.bethere.co.uk) |
| 13:23.34 | eway | cr2 you about ? |
| 13:23.53 | cr2 | hi eway |
| 13:24.09 | cr2 | LeStatV: don't know |
| 13:24.27 | eway | hi cr2 i have a friend who has a htc topaz is it worth me doing some dumps spl smem etc etc |
| 13:24.29 | cr2 | toer: d,0,vol vs d,1,vol |
| 13:24.37 | Gnutoo | cr2, a friend made a program with fseek for me....will fseek-based thing work? |
| 13:25.06 | cr2 | eway: yes. the standard combination. smem,spl, wince nk.exe |
| 13:25.17 | LeStatV | cr2: could U give example configure the alt pins for AC97 |
| 13:25.30 | eway | can you pm me the lines you want run while i get haret up and running on it |
| 13:25.39 | cr2 | Gnutoo: i hope so. |
| 13:25.42 | cr2 | eway: yes |
| 13:25.57 | Gnutoo | ok there is a lot of 0000 |
| 13:26.05 | cr2 | LeStatV: check how other devices are doing it. i've worked only with I2S |
| 13:26.18 | cr2 | Gnutoo: yes |
| 13:27.06 | Gnutoo | ok so that's normal |
| 13:27.11 | Gnutoo | I'll try with gps on |
| 13:33.55 | Gnutoo | cr2, even when gps is on |
| 13:34.23 | Gnutoo | I read mailing list things about reads returning 0 on msm when it shouldn't |
| 13:34.32 | cr2 | Gnutoo: only zeros ? |
| 13:34.33 | Gnutoo | maybe the program doesn't check for cetain things |
| 13:34.34 | Gnutoo | yes |
| 13:34.44 | Gnutoo | 0000000 0000 0000 0000 0000 0000 0000 0000 0000 |
| 13:34.44 | Gnutoo | * |
| 13:34.44 | Gnutoo | 0000400 |
| 13:34.59 | Gnutoo | I'll check the program |
| 13:36.33 | Gnutoo | or maybe it's me |
| 13:36.37 | Gnutoo | I'll activate the wifi |
| 13:36.52 | Gnutoo | ah ouch...no wifi cause modified kenrel |
| 13:37.07 | Gnutoo | is it possible to get networking with adb |
| 13:37.12 | Gnutoo | from computer to phone |
| 13:56.48 | toer | cr2: ? |
| 13:59.46 | cr2 | toer: your BT is device=3. only 0 and 1 were seen before |
| 14:00.11 | cr2 | toer: and the dev=0xd for all sound ops. it seems that we should patch the kernel here. |
| 14:02.34 | toer | cr2: ok |
| 14:04.08 | *** join/#htc-linux cr2 (n=cr2@109.84.6.66) |
| 14:05.23 | *** join/#htc-linux dcordes-kais (n=dcordes-@ip-77-24-63-175.web.vodafone.de) |
| 14:07.26 | cr2 | dcordes-kais: hi |
| 14:08.40 | *** join/#htc-linux juke71_ (n=dille@82.116.239.89) |
| 14:11.49 | *** join/#htc-linux balans1 (n=Administ@53543B80.cable.casema.nl) |
| 14:12.01 | dcordes-kais | cr2 hello |
| 14:14.06 | cr2 | dcordes-kais: i want to patch playwav2, add an .mp3 and .wav sample file to initramfs. |
| 14:14.15 | dcordes-kais | cr2 how's it going? anything groundbreaking? |
| 14:14.49 | cr2 | not really, but moving forward. |
| 14:14.51 | dcordes-kais | cr2 ok I can do this on sunday |
| 14:15.00 | eway | hi dcordes-kais |
| 14:15.00 | cr2 | groundbreaking will be BT |
| 14:15.05 | cr2 | dcordes-kais: o |
| 14:15.24 | dcordes-kais | hey ellis |
| 14:15.57 | *** join/#htc-linux balans (n=Administ@53543B80.cable.casema.nl) |
| 14:17.29 | cr2 | 02000030 441a2baa 02000000 |
| 14:17.36 | cr2 | 02000030 441a2baa 03000000 |
| 14:17.47 | cr2 | looks like some intermediate amss version |
| 14:18.34 | cr2 | #elif (CONFIG_MSM_AMSS_VERSION == 6220) || (CONFIG_MSM_AMSS_VERSION == 6225) |
| 14:18.36 | cr2 | #define RPC_SND_VERS 0xaa2b1a44 /* 2854951492 */ |
| 14:18.37 | cr2 | #define SND_SET_DEVICE_PROC 2 |
| 14:18.39 | cr2 | #define SND_SET_VOLUME_PROC 3 |
| 14:19.41 | cr2 | 6125 ? |
| 14:22.43 | cr2 | LOL |
| 14:22.50 | dcordes-kais | what' |
| 14:22.50 | cr2 | new htc AT command |
| 14:23.03 | cr2 | AT@SVN=1 |
| 14:23.14 | dcordes-kais | ?? |
| 14:23.54 | cr2 | AT@BRIC was yesterday |
| 14:25.21 | cr2 | 6120 says smem |
| 14:35.54 | *** join/#htc-linux zfxp (i=kdub@h70.72.135.98.ip.windstream.net) |
| 15:11.53 | mdrobnak | cr2: Quick question - should I try disabling the sound driver and seeing if that changes anything regarding the crashes on the 110? Or do you think the memtest path is better? |
| 15:15.42 | cr2 | mdrobnak: have you patched the kernle to disable the non 0xd device param ? |
| 15:15.43 | *** join/#htc-linux Guest977 (i=kdub@h125.69.135.98.ip.windstream.net) |
| 15:16.00 | mdrobnak | cr2: I did, but did not try it yet. |
| 15:16.08 | mdrobnak | Using the code I wrote in the channel. |
| 15:17.29 | mdrobnak | brb |
| 15:21.48 | *** join/#htc-linux balans1 (n=Administ@53543B80.cable.casema.nl) |
| 15:24.12 | cr2 | [14336.698089] audio: failed to get audplay0 dsp module |
| 15:24.13 | cr2 | [14336.708770] audmgr_rpc_thread() start |
| 15:28.04 | cr2 | <PROTECTED> |
| 15:28.06 | cr2 | <PROTECTED> |
| 15:28.07 | cr2 | <PROTECTED> |
| 15:28.09 | cr2 | <PROTECTED> |
| 15:28.11 | cr2 | <PROTECTED> |
| 15:29.27 | *** join/#htc-linux ellisway (n=eway@78-86-162-166.zone2.bethere.co.uk) |
| 15:31.35 | cr2 | static struct adsp_module_info module_info[] = { |
| 15:34.05 | mickeyl | @SVN=1 ? What's that doing? |
| 15:34.41 | cr2 | mickeyl: goes to svn.linuxtogo.org |
| 15:35.16 | cr2 | it seems i've found why .mp3 is not playing |
| 15:35.50 | Captnoord | oO |
| 15:35.55 | mickeyl | why? |
| 15:36.19 | cr2 | <PROTECTED> |
| 15:36.22 | cr2 | is missing in |
| 15:36.28 | cr2 | static struct adsp_module_info module_info[] = { |
| 15:36.35 | cr2 | in adsp_5200.c |
| 15:37.23 | cr2 | --- a/arch/arm/mach-msm/qdsp5/adsp_5200.c |
| 15:37.24 | cr2 | +++ b/arch/arm/mach-msm/qdsp5/adsp_5200.c |
| 15:37.26 | cr2 | @@ -250,6 +250,7 @@ static uint32_t *qdsp_queue_offset_table[] = { |
| 15:37.27 | cr2 | <PROTECTED> |
| 15:37.29 | cr2 | <PROTECTED> |
| 15:37.30 | cr2 | <PROTECTED> |
| 15:37.32 | cr2 | + QDSP_MODULE(AUDPLAY0TASK), |
| 15:39.19 | cr2 | mickeyl: newer htc phones (topa/rhod) aka diam2/raph2 use amss612[05] |
| 15:39.39 | cr2 | seems to be a minor thing, but still an annoyance. |
| 15:39.48 | mickeyl | "fun". |
| 15:40.09 | mickeyl | that means mp3 is not possible or you can adjust the commands/params? |
| 15:41.35 | cr2 | i'll recomplie the kernel and try again |
| 15:41.58 | cr2 | .mp3 can be played as pcm |
| 15:42.08 | cr2 | without any help from dsp |
| 15:44.09 | cr2 | mickeyl: does alsa support 'accelerated' playing ? |
| 15:44.34 | Captnoord | cr2 I tought that that was the whole idea about alsa |
| 15:44.55 | Gnutoo | I was stupid...X displaid something |
| 15:44.58 | cr2 | Captnoord: me = !sound_expert |
| 15:45.02 | Captnoord | k |
| 15:45.09 | mickeyl | depends on the driver |
| 15:45.12 | Gnutoo | just that as it was black by default!!! |
| 15:45.18 | Gnutoo | I didn't saw that |
| 15:45.19 | mickeyl | i'm not sure whether they have a codec abstraction |
| 15:45.27 | mickeyl | since that's what higher level sound APIs such as gstreamer are for |
| 15:45.32 | Gnutoo | cr2, I'll try network via bluetooth |
| 15:45.44 | mickeyl | afaik they only have "accelerated" pcm mixing / resampling etc. |
| 15:45.47 | Captnoord | nah I hope brb because i'm gonna give my ubuntu fix a go |
| 15:45.48 | Captnoord | so |
| 15:45.49 | Captnoord | have fun |
| 15:45.50 | Captnoord | brb |
| 15:46.30 | mickeyl | if we can play accelerated mp3, it'd be nice at least for event sounds |
| 15:46.38 | mickeyl | releaving the CPU from these tasks |
| 15:46.52 | cr2 | mickeyl: btw, is it possible to allocate 8MB buffer with kmalloc ? |
| 15:46.58 | cr2 | mickeyl: sure. |
| 15:47.12 | mickeyl | (8MB) i'd say yes, if that memory is available. |
| 15:47.23 | *** join/#htc-linux stickboy (n=anonymou@128.153.211.18) |
| 15:47.31 | cr2 | i'm from the times when 128K was the upper limit |
| 15:47.34 | mickeyl | i don't think kmalloc has an upper limit, although i don't know whether it only can give you defragemented memory |
| 15:47.59 | cr2 | kmalloc = defragmented |
| 15:48.02 | mickeyl | hmm |
| 15:48.07 | mickeyl | perhaps i'm confusing this with vmalloc |
| 15:48.08 | cr2 | !vmalloc |
| 15:48.14 | cr2 | yes |
| 15:48.33 | cr2 | there was a problme with >128K allocation |
| 15:48.37 | mickeyl | right |
| 15:48.41 | cr2 | so it was reserved at boot |
| 15:49.31 | cr2 | it was suggested to kmalloc128K recursively, before you get a nonfragmented pool |
| 15:49.43 | cr2 | called 'aggressive' though. |
| 15:50.22 | cr2 | it should be a good idea to get rid of pmem_* |
| 15:52.55 | *** join/#htc-linux mdrobnak (n=mdrobnak@pool-98-116-165-7.nycmny.fios.verizon.net) |
| 15:55.35 | *** join/#htc-linux Untouchab1e (n=Untoucha@cm-84.209.89.86.getinternet.no) |
| 15:56.24 | mdrobnak | cr2: I just looked in the log - so what do you suggest I do first. So much stuff going on, the analytic side of my brain is in overload. :-) (Work is insane these days) I have to run again for a few mins, I'll read when I come back. |
| 15:57.53 | cr2 | mdrobnak: -ENODEV for snf.dev!= 0xd for volume first |
| 15:58.27 | cr2 | mickeyl: what is your panel id ? |
| 15:58.42 | cr2 | mickeyl: can you paste the dmesg from latest kernel ? |
| 15:59.18 | mickeyl | sorry, i don't have a booting raphael right now, we're packing for vacations |
| 15:59.27 | mickeyl | flying to canarian islands tomorrow |
| 15:59.58 | cr2 | lol |
| 16:00.10 | cr2 | have a nice vacation :) |
| 16:00.24 | mickeyl | thanks :) |
| 16:00.26 | mickeyl | 2 weeks |
| 16:00.52 | cr2 | ok |
| 16:01.48 | *** join/#htc-linux Guest977 (i=kdub@98.135.121.179) |
| 16:03.03 | cr2 | mickeyl: .mp3 works now :) |
| 16:03.13 | cr2 | mickeyl: can you commit the ptch ? |
| 16:03.26 | *** join/#htc-linux pleemans (n=toi@d54C2A96D.access.telenet.be) |
| 16:04.31 | Gnutoo | mmm |
| 16:04.52 | Gnutoo | xset m 9 0 ->ok |
| 16:04.53 | Gnutoo | xset m 10 0 ->X crashes |
| 16:06.23 | cr2 | hehe |
| 16:07.09 | Gnutoo | hi mickeyl you were talking about alsa...did someone imported the codeaurora's patches somewhere ? |
| 16:07.54 | cr2 | Gnutoo: i think we are going to merge our patches into codeaurora |
| 16:07.59 | cr2 | tree |
| 16:08.25 | Gnutoo | cr2, ok but last time I tried it didn't compile...a lot of simple fix were to do and at a point I stoped |
| 16:08.27 | cr2 | tvout is cool |
| 16:08.37 | Gnutoo | cr2, do you have others patches? |
| 16:08.50 | cr2 | Gnutoo: druidu already booted it on diamon |
| 16:08.57 | Gnutoo | ok |
| 16:09.06 | Gnutoo | are there the patches somewhere? |
| 16:09.18 | cr2 | need to wait for him |
| 16:09.20 | Gnutoo | btw shouldn't we also import in linuxtogo's git |
| 16:09.25 | Gnutoo | ok thanks a lot |
| 16:09.43 | cr2 | Gnutoo: does g1 play .mp3 ? which amss you have ? |
| 16:09.58 | Gnutoo | cr2, playwav2 does |
| 16:10.00 | Gnutoo | yes |
| 16:10.01 | cr2 | 6220+ i guess |
| 16:10.08 | Gnutoo | I don't know the version |
| 16:10.18 | Gnutoo | cr2, btw I've an important question... |
| 16:10.20 | cr2 | because earlier do not support it. |
| 16:10.50 | Gnutoo | cr2,I didn't understand the arch: does sound and gps passes by the broadband cpu? |
| 16:11.02 | Gnutoo | also for the dump: |
| 16:11.13 | Gnutoo | *or I should setup bluetooth networking |
| 16:11.23 | Gnutoo | *or I should find a gps app that doesn't use network |
| 16:11.44 | cr2 | sound is done by adsp, don't know if you can talk to codec directly. it's difficult to say without the CPU manuals |
| 16:12.04 | Gnutoo | adsp is the baseband? |
| 16:12.21 | cr2 | it's Application DSP |
| 16:12.31 | Gnutoo | ah ok like ti omap then |
| 16:12.38 | cr2 | there are 4 CPUs on msm |
| 16:12.46 | Gnutoo | ok |
| 16:13.04 | cr2 | aDSP, ARM11, ARM9 and mDSP |
| 16:13.04 | Gnutoo | 1)application cpu |
| 16:13.09 | Gnutoo | ok |
| 16:13.14 | Gnutoo | arm9 is the radio? |
| 16:13.19 | Gnutoo | and mDSP is? |
| 16:13.40 | cr2 | Modem DSP |
| 16:13.45 | Gnutoo | ok thanks |
| 16:13.54 | cr2 | for gsm/cdma/umts processing |
| 16:13.58 | Gnutoo | ok |
| 16:14.07 | cr2 | it also does gps (i think) |
| 16:14.19 | Gnutoo | yes /dev/smc27 |
| 16:14.28 | Gnutoo | and /dev/smc0 for the modem |
| 16:14.38 | Gnutoo | that are an emulated serial link over the ram |
| 16:14.50 | cr2 | because the qualcomm CPU diagramm shows a common chip for phone/gps which feeds the mDSP |
| 16:14.58 | Gnutoo | ok |
| 16:15.32 | cr2 | <PROTECTED> |
| 16:16.05 | Gnutoo | ok,how does the mDSP have audio? is it connected to the aDSP? |
| 16:16.13 | Gnutoo | or does it have its own audio |
| 16:16.46 | cr2 | don't know about the pcm routing on chip |
| 16:17.00 | cr2 | don't forget that we don't have CPU docs |
| 16:17.09 | Gnutoo | ok |
| 16:17.10 | cr2 | only the crippled g1/g2 code |
| 16:17.23 | Gnutoo | thanks a lot!!! for the explanations |
| 16:17.28 | cr2 | np |
| 16:19.31 | Gnutoo | and we don't know what arm9 does? |
| 16:22.00 | cr2 | it has an own firmware aka amss |
| 16:22.14 | Gnutoo | ok but what's its function? |
| 16:22.34 | cr2 | to control the mDSP and do other control functions |
| 16:22.48 | Gnutoo | ah ok so everything passes trough the arm9 |
| 16:22.50 | Gnutoo | thanks a lot |
| 16:23.25 | cr2 | a lot , but not everything |
| 16:23.43 | Gnutoo | ok |
| 16:24.52 | *** join/#htc-linux Echo31 (n=olivier@mir31-4-82-240-194-54.fbx.proxad.net) |
| 16:26.28 | dwaradzyn | cr2: taking advantage of your good mood for explaining things :) how do we approach no sound on blac? |
| 16:29.22 | cr2 | dwaradzyn: i need an agps-free rpcdump |
| 16:29.27 | *** join/#htc-linux balans (n=Administ@53543B80.cable.casema.nl) |
| 16:29.49 | dwaradzyn | my last one was still messed? |
| 16:31.05 | dwaradzyn | this one: http://rapidshare.com/files/282189379/blac100.rar |
| 16:31.26 | cr2 | getting it now |
| 16:33.04 | cr2 | 2min prob again |
| 16:36.21 | cr2 | dwaradzyn: use privatepaste or something |
| 16:36.49 | cr2 | dwaradzyn: you may even uuencode it and paste as text. the file is relatively small |
| 16:37.05 | dwaradzyn | will do next time |
| 16:42.25 | cr2 | dwaradzyn: downloaded now |
| 16:45.37 | cr2 | dwaradzyn: yes, it's agps only |
| 16:46.21 | cr2 | dwaradzyn: can't you flash some rom without the gps dlls ? |
| 16:47.22 | cr2 | dwaradzyn: such problem does not exist even on topaz |
| 16:47.41 | dwaradzyn | not really. how can i tell it dump is agps messed? |
| 16:48.09 | cr2 | search for '0030 ' in tx.txt |
| 16:48.36 | cr2 | you will find only |
| 16:48.39 | cr2 | 5b000030 00000000 1a000000 |
| 16:49.46 | dwaradzyn | 5b000030 0a000030 5b000030 |
| 16:53.36 | dwaradzyn | if there is no agps i would not find '0030 ' in tx.txt? |
| 16:53.49 | cr2 | no 5b000030 |
| 16:53.58 | dwaradzyn | ok |
| 16:54.00 | cr2 | dwaradzyn: 0a000030 ? |
| 16:54.18 | cr2 | ADSPRTOSATOM 0x3000000a adsp_* |
| 16:54.36 | dwaradzyn | the line is 0115bc c2cf28ef 407ec7eb 7504a103 370a7002 33487dac f701000a dbf3bc84 049500dc 0a000030 ad0d1160 80d607f6 d2af05b4 |
| 16:54.51 | cr2 | no, it's not adsp |
| 16:55.03 | cr2 | it's some data value from agps datastream |
| 16:55.39 | dwaradzyn | if there is no 5b000030 in tx.txt there is no agps, right? |
| 16:55.42 | cr2 | and these blobs are big 0x1e8/4 bytes |
| 16:55.51 | cr2 | so they spam all fifo |
| 16:56.04 | cr2 | dwaradzyn: yes |
| 16:57.28 | cr2 | 0x1e8 bytes = 488 |
| 16:57.49 | cr2 | it's a lot |
| 16:58.06 | cr2 | i think the driver has a 512byte limit on the rpc message |
| 17:03.41 | *** join/#htc-linux captnoord (n=captnoor@dc5147a47b.adsl.wanadoo.nl) |
| 17:07.23 | *** join/#htc-linux balans (n=Administ@212-123-149-239.ip.telfort.nl) |
| 17:07.24 | mdrobnak | Finally back and can do for a few minutes. Here's my plan of attack: Put in the sound code, build a kernel. Run fillmem, make sure it doesn't crash. (I've seen the correct behavior @ 89M), if ok, try to boot into android. Will let you know within 10 minutes the results. |
| 17:07.26 | cr2 | mdrobnak: i suggest to add a kernel warning for dev != 0xd , and set it to 0xd in the rpc call. something like 'buggy program %s is calling snd_set_volume with dev=%d != 0xd', current->name, dev |
| 17:07.52 | cr2 | mdrobnak: ok |
| 17:07.58 | mdrobnak | Sounds good. I'll do that. |
| 17:08.20 | mdrobnak | At least I have some time where it's not past midnight for you, cr2. :-) |
| 17:08.39 | cr2 | lol |
| 17:09.00 | cr2 | i need to buy some food for the weekend, before it's too late. bbl |
| 17:10.17 | mdrobnak | k |
| 17:14.02 | *** join/#htc-linux rafyvitto (i=rafyvitt@24.54.253.34) |
| 17:22.50 | *** join/#htc-linux Reactor16 (n=Reactor1@41.105.1.194) |
| 17:26.15 | phh | <Gnutoo> *or I should find a gps app that doesn't use network <--- something like gps2blue you mean ? |
| 17:26.26 | Gnutoo | no |
| 17:26.39 | Gnutoo | I meant getting the nework to get google maps start |
| 17:26.46 | Gnutoo | I still had no success: |
| 17:26.59 | Gnutoo | /sys/module/board_trout/parameters/bluetooth_power_on |
| 17:27.01 | Gnutoo | is missing |
| 17:27.41 | phh | ok |
| 17:27.44 | phh | what about usb then ? |
| 17:28.03 | *** join/#htc-linux root2 (n=root@rgnb-5d87cd6f.pool.mediaWays.net) |
| 17:28.58 | Gnutoo | how do I do that with usb |
| 17:28.59 | Gnutoo | ? |
| 17:29.12 | Gnutoo | do I compile the gadget framework? |
| 17:29.25 | Gnutoo | or can I use the function framework? |
| 17:29.49 | phh | i think gadget is needed |
| 17:32.56 | mdrobnak | Argh. task_struct current->name doesn't work..where the heck is it defined in the kernel? There are tons of references...but I can't find the struct's definition.. |
| 17:34.56 | Gnutoo | ok I'll compile gadget |
| 17:35.07 | Gnutoo | I hope it doesn't interfer with function |
| 17:35.36 | mdrobnak | hmm. current->pid would work |
| 17:36.31 | Gnutoo | phh, oh no...no qualomm_msm support in the kernel I was compiling(2.6.25) |
| 17:36.46 | Gnutoo | phh, for usb gadget |
| 17:37.07 | phh | oh |
| 17:37.09 | Gnutoo | only Renesas M66592 USB Peripheral Controller (USB_GADGET_M66592) |
| 17:37.57 | Gnutoo | phh, btw do you know how to use that: USB Ethernet Function (USB_FUNCTION_ETHER) |
| 17:38.24 | phh | Gnutoo: it needs a gadget side |
| 17:38.49 | phh | hum, not so sure what "function" is |
| 17:39.25 | Gnutoo | phh, function is android's gadget-like thing |
| 17:39.31 | phh | oh ok |
| 17:39.32 | Gnutoo | you have adb etc... |
| 17:39.54 | cr2 | mdrobnak: you can fill /dev/shm with junk before doing your testing. 1/2 ram will disappear |
| 17:40.09 | phh | never looked at android specific stuff, but i guess it's like ethernet gadget |
| 17:41.22 | mdrobnak | cr2: Good idea. |
| 17:41.26 | phh | if it isn't too much time consuming you can give it a try, if it's like gadget it's easy to try |
| 17:41.48 | mdrobnak | cr2: Ok, how does this task_struct work...I'm having trouble putting that code in. |
| 17:41.54 | Gnutoo | phh, ok I'll try |
| 17:43.07 | cr2 | mdrobnak: need to look myself for the details |
| 17:43.34 | mdrobnak | cr2: totally understand. |
| 17:43.54 | cr2 | phh: i'm wondering how they managed to break /dev/mem on msm |
| 17:44.06 | phh | Gnutoo: do you have adb running btw ? |
| 17:44.12 | Gnutoo | yes |
| 17:44.13 | Gnutoo | I have |
| 17:44.19 | phh | Gnutoo: maybe try adb ppp |
| 17:44.30 | Gnutoo | ok but that's for ppp no? |
| 17:44.40 | *** join/#htc-linux balans (n=Administ@5ED1D80D.cable.ziggo.nl) |
| 17:44.42 | Gnutoo | I want to give network to the phone not the contrary |
| 17:45.00 | phh | not sure |
| 17:45.16 | Gnutoo | ok |
| 17:45.20 | phh | yeah you're right |
| 17:45.28 | Gnutoo | I'll try to find how to activate this ethernet thing |
| 17:45.47 | phh | when built, it's just ifconfig usb0 up i think |
| 17:46.27 | Gnutoo | /proc/net/dev shows usb0 |
| 17:46.29 | phh | and ifconfig ip & route add & resolv.conf & friends. |
| 17:46.51 | Gnutoo | yes but what do I have to do on my laptop in order to see that usb0 laptop side |
| 17:47.37 | phh | if you have a standard kernel build with a "recent" (less than 3 years old.) distribution it should be automatically as soon as the device is rightly setted |
| 17:48.00 | Gnutoo | yes but cat /proc/net/dev see no difference on my laptop |
| 17:48.12 | Gnutoo | what support should I add in the kernel? |
| 17:48.12 | cr2 | mdrobnak: current->comm ? |
| 17:48.21 | phh | hum, guess it have to be started somewhere else on the device then ... |
| 17:48.33 | Gnutoo | I've 2.6.31 but it's home-built |
| 17:48.56 | phh | Gnutoo: take a look at /sys/class/net/usb0 on the device maybe |
| 17:50.26 | mdrobnak | No warnings or errors :-) |
| 17:50.33 | cr2 | ok |
| 17:51.13 | Gnutoo | ok I'll look but I don't know what to search for |
| 17:53.03 | captnoord | let download a newer version of the toolchain |
| 17:53.10 | captnoord | not that it would change anything |
| 17:53.27 | captnoord | http://www.codesourcery.com/downloads/public/gnu_toolchain/arm-none-linux-gnueabi/arm-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2 |
| 17:53.27 | captnoord | I dono how you guys do thius |
| 17:53.27 | captnoord | this |
| 17:55.33 | mdrobnak | Good job cr2 - program name is mediaserver |
| 17:55.41 | mdrobnak | except I forgot to set the id to 0xd. Doh. |
| 17:57.02 | *** join/#htc-linux Untouchab1e (n=Untoucha@cm-84.209.89.86.getinternet.no) |
| 17:58.18 | cr2 | hehe. source available ? |
| 17:59.07 | *** join/#htc-linux root2 (n=root@rgnb-5d87de3a.pool.mediaWays.net) |
| 17:59.08 | mdrobnak | Not sure. |
| 18:00.27 | captnoord | I wonder if porting to .29 would be useful :P |
| 18:00.32 | mdrobnak | Re-grabbing the android repo. Will let you know. |
| 18:00.46 | mdrobnak | captnoord: I think at some point all of us should start working on .29, no? |
| 18:00.58 | captnoord | yea |
| 18:01.48 | mdrobnak | If RAM issues can be solved, and the RIL crashing can be solved on the RAPH, I think it's in pretty decent shape right now, honestly. It's far from perfect, but very usable. |
| 18:02.20 | cr2 | mdrobnak: you may try the cam driver then :) |
| 18:03.15 | mdrobnak | As in camera? no thanks :-) |
| 18:03.42 | mdrobnak | No, I mean, it's usable as a phone + pda. yeah, it's not perfect.. but for me, I need voice and email. |
| 18:04.35 | cr2 | email=sms ? |
| 18:04.42 | mdrobnak | Crap, I don't have my ram console changes on this kernel. (Installed Ubuntu last night to get a full env) Have to pull it in from pastebin |
| 18:04.46 | mdrobnak | No, as in Exchange email. |
| 18:05.06 | mdrobnak | Which using the HTC app that people are using on the G1, is decent. |
| 18:05.25 | mdrobnak | A full Hero build would rock, but that sure isn't happening until RAM issues are fixed. |
| 18:05.47 | cr2 | mdrobnak: can you do 'dump mmu' ? |
| 18:06.31 | mdrobnak | lol I *just* switched it to disk drive mode. give me 5 mins. I want to get the RAM console available, and then I'll do a dump mmu in haret. |
| 18:08.17 | cr2 | ok |
| 18:09.31 | *** join/#htc-linux MethoS- (n=clemens@134.102.106.250) |
| 18:12.51 | captnoord | the RAM issues are related to memory fragmentation isn't it? |
| 18:14.19 | mdrobnak | Ok, one sec cr2, about to do that. |
| 18:14.57 | mdrobnak | ok, that's huge. |
| 18:15.35 | cr2 | mdrobnak: yes |
| 18:16.11 | mdrobnak | easiest way to redirect to a file? |
| 18:16.46 | mdrobnak | nvm |
| 18:18.10 | cr2 | mdrobnak: there is also a memory allocation testing command in haret |
| 18:18.43 | mdrobnak | You mean like writing to an address and reading back? |
| 18:18.49 | mdrobnak | Thats what I did with dzo |
| 18:18.52 | mdrobnak | and it seemed fine |
| 18:19.14 | mdrobnak | That dump was 1.3MBs |
| 18:19.27 | mdrobnak | What's the best way to get it to you? |
| 18:20.16 | dwaradzyn | cr2: i did not disable agps fully but it has no data now - maybe its not spamming that much now (this one is TX): http://www.privatepaste.com/741zCQOsDu |
| 18:20.29 | dwaradzyn | does it look legible now? |
| 18:22.32 | mdrobnak | I will upload to privatepaste, as they have a 10MB limit. |
| 18:23.48 | cr2 | 55000030 00000000 01000000 |
| 18:23.54 | cr2 | dwaradzyn: looks better |
| 18:24.12 | cr2 | 02000030 00000000 02000000 |
| 18:24.17 | cr2 | set_voulme |
| 18:24.44 | *** join/#htc-linux MrPippy (n=pip@adsl-75-36-57-196.dsl.sndg02.sbcglobal.net) |
| 18:26.03 | mdrobnak | cr2: mmu dump http://www.privatepaste.com/f11a8BaJrx |
| 18:27.51 | mdrobnak | cr2: http://pastebin.com/m663dea44 That was the last boot. |
| 18:28.47 | cr2 | 5b000030 00000000 03000000 -> 4 |
| 18:29.07 | cr2 | pdsm_client_init (pd=2/xtra=b/lcs=4) |
| 18:29.14 | mdrobnak | I have to run. Back in 30 mins. |
| 18:29.16 | cr2 | lcs ;-) |
| 18:29.23 | cr2 | ok |
| 18:30.13 | cr2 | dwaradzyn: you have an lcs-only setup. interesting |
| 18:31.19 | dwaradzyn | what is lcs? |
| 18:32.23 | Marajin | lovely computer system! |
| 18:33.28 | cr2 | dwaradzyn: http://www.thefreelibrary.com/Cell-based+location+services+on+target+and+Japan+has+cheapest+WLAN-a0108881938 |
| 18:33.41 | cr2 | dwaradzyn: the worst of the 3 available. |
| 18:34.21 | cr2 | position determination without gps. |
| 18:34.36 | dwaradzyn | cr2: before i dump tx and rx, do i have to go to linux and use playwav2? |
| 18:35.08 | cr2 | no |
| 18:35.44 | cr2 | dwaradzyn: you also used camera ? |
| 18:36.11 | dwaradzyn | recently no |
| 18:36.37 | cr2 | dwaradzyn: the rpc looks ok. nothing unusual |
| 18:36.50 | GlemSom | I've never used git before - and I'm having a bit trouble checkinging out the latest head of htc-msm-2.6.27.. I thought all I needed was a git clone (guess I was wrong here!)...How do I change the latest htc-msm-2.6.27 head? |
| 18:36.50 | cr2 | so it must be something else |
| 18:37.27 | dwaradzyn | GlemSom: git checkout -b htc-msm-2.6.27 origin/htc-msm-2.6.27 |
| 18:38.10 | cr2 | GlemSom: in the tree you cloned |
| 18:38.46 | cr2 | dwaradzyn: can you pastebin the full dmesg ? |
| 18:38.52 | GlemSom | hmm.. aparently even my clone failed "fatal: git checkout: updating paths is incompatible with switching branches."... I've been messing a lot around, better redownload it again... |
| 18:39.07 | dwaradzyn | cr2: yes in a sec |
| 18:39.28 | *** join/#htc-linux lusse (n=lusse@83.255.52.110) |
| 18:39.29 | cr2 | GlemSom: it's even in the blackstone wiki |
| 18:39.31 | lusse | Hi all |
| 18:39.34 | cr2 | git clone git://git.linuxtogo.org/home/groups/mobile-linux/kernel.git |
| 18:39.40 | cr2 | git checkout -b htc-msm-2.6.27 origin/htc-msm-2.6.27 |
| 18:39.42 | lusse | I'm reading http://wiki.xda-developers.com/index.php?pagename=RaphaelLinux |
| 18:39.49 | *** join/#htc-linux UnknownArtists (n=unknown@84.19.198.69) |
| 18:39.51 | GlemSom | cr2, Thanks! I'll give that a try! :D |
| 18:39.53 | cr2 | will create the directory 'kernel' with the kernel tree |
| 18:40.06 | lusse | I'm just wondering if the phone will boot with android |
| 18:40.22 | lusse | and if I'll lose my data on wm6.1 on my diamond :) |
| 18:40.33 | GlemSom | cr2, Guess I better go read a bit about git... Seems kinda confusing with the tags, heads and branches.. :P hehe |
| 18:41.37 | cr2 | lusse: you will not loose anything, that is stored on nand. just the ram will be wiped |
| 18:41.50 | lusse | pretty cool |
| 18:41.55 | lusse | I'm so sick of wm6.1 anyway |
| 18:41.57 | lusse | and touchflo |
| 18:42.08 | lusse | so if I can run everything on android, it would be more than sweet :D |
| 18:42.18 | cr2 | not yet. |
| 18:42.22 | cr2 | but soon :) |
| 18:42.33 | lusse | is Diam-20081229.tar.gz the latest one to get? |
| 18:42.43 | lusse | sounds a tad old |
| 18:42.47 | cr2 | lusse: i doubt it |
| 18:43.01 | thedicemaster | http://connect-utb.com |
| 18:43.28 | lusse | oh my |
| 18:43.30 | lusse | thanx |
| 18:43.31 | lusse | :) |
| 18:43.39 | lusse | I was following http://wiki.xda-developers.com/index.php?pagename=RaphaelLinux |
| 18:43.40 | thedicemaster | latest complete build there is 09-09-09 i think, but with updated kernels available. |
| 18:44.04 | thedicemaster | latest kernel is 18-09--09 |
| 18:44.24 | Gnutoo | ~seen druidu |
| 18:44.27 | cr2 | lusse: read this one. from the end : http://forum.xda-developers.com/showthread.php?t=402002 |
| 18:45.38 | lusse | I'm amazed |
| 18:45.44 | lusse | on how people actually get this running |
| 18:45.45 | lusse | :) |
| 18:46.33 | lusse | and is it THAT simple? just copy over the file and run it? |
| 18:48.00 | thedicemaster | for you, yes. |
| 18:48.07 | cr2 | lol |
| 18:48.13 | thedicemaster | but that's because others have done the hard work. |
| 18:48.32 | *** join/#htc-linux pronik` (n=user@g229120008.adsl.alicedsl.de) |
| 18:48.32 | lusse | I'm sorry |
| 18:48.36 | lusse | didn't mean to sound rude |
| 18:48.48 | lusse | as I said before, I'm really amazed how someone pulled this off |
| 18:49.01 | lusse | and even so to make it so easy for a "normie" like me to install |
| 18:49.08 | dwaradzyn | cr2: full blac dmesg http://www.privatepaste.com/cc0fLXEPqY |
| 18:49.13 | cr2 | ok |
| 18:51.58 | cr2 | [ 16.797088] Searching for adsp_cid |
| 18:52.00 | cr2 | [ 16.893310] adsp cid found: ef953a1a |
| 18:54.02 | lusse | I apologize in advance if this question is silly, but does haret.exe kill touchflo or anything to get some ram? or will it run in the background? |
| 18:55.00 | cr2 | lusse: haret.exe kills wince completely |
| 18:55.17 | cr2 | takes over the cpu and ram, and wipes wince away :) |
| 18:55.30 | lusse | sweeeeet :) |
| 18:55.35 | lusse | this is a joy |
| 18:55.38 | dwaradzyn | at least it does when you start linux from it |
| 18:55.42 | lusse | I was so fed up with my phone |
| 18:55.59 | lusse | the only positive with it was active sync for my job |
| 18:56.04 | lusse | but I can live without it :) |
| 18:56.04 | cr2 | dwaradzyn: the epson mddi client needs some patches. |
| 18:56.49 | dwaradzyn | cr2: whats to be corrected? |
| 18:57.16 | cr2 | <3>mddi_wait_interrupt 1, timeout waiting for 8000, INT = 23a001, STAT = 800061 gotint = 2a004 |
| 18:57.33 | cr2 | something is setup up in a wrong way |
| 18:58.21 | lusse | installing atm.... |
| 18:58.26 | lusse | waiting with anticipation :D |
| 18:58.44 | cr2 | dwaradzyn: i have commented that out: |
| 18:58.47 | cr2 | [ 25.368011] msm_serial: detected port #0 |
| 18:58.48 | cr2 | [ 25.376281] msm_serial: probe of msm_serial.0 failed with error -2 |
| 18:59.09 | boli^ | I need a barrel of otters and some hand lotion. |
| 18:59.27 | dwaradzyn | lol |
| 18:59.52 | thedicemaster | lusse if you want to be able to charge your phone while in android, plug it in before starting haret. |
| 19:00.07 | cr2 | [ 25.945587] microp-klt: This hardware is not yet supported: 060d |
| 19:00.19 | thedicemaster | android doesn't know your phone can be charged unless it sees it charging while booting. |
| 19:00.32 | cr2 | dwaradzyn: if the command set is compatible, you can just edit this switch() |
| 19:03.02 | lusse | aaah |
| 19:03.06 | lusse | thanx thedicemaster |
| 19:03.19 | cr2 | dwaradzyn: the dmesg is ok. |
| 19:03.32 | lusse | I noticed it now. It's installing everything now atm and I plugged it in so it wouldn't run out of battery |
| 19:03.35 | *** join/#htc-linux cr2 (n=cr2@109.84.6.66) |
| 19:03.50 | lusse | and it doesn't glow, so I was too slow :D |
| 19:04.18 | lusse | so basicly, I need to boot reboot every time I need to recharge my phone, right? |
| 19:05.05 | *** join/#htc-linux marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 19:05.10 | cr2 | mdrobnak: [ 1.745178] htcraphael: WiFi device enable ? |
| 19:07.54 | thedicemaster | lusse no |
| 19:07.54 | *** join/#htc-linux ali1234 (n=al@87.106.101.225) |
| 19:08.28 | thedicemaster | once booted if you pull the plug out android will still remember how your phone charges. |
| 19:08.48 | *** part/#htc-linux ali1234 (n=al@87.106.101.225) |
| 19:08.55 | *** join/#htc-linux ali1234 (n=al@87.106.101.225) |
| 19:09.00 | *** join/#htc-linux cr2 (n=cr2@109.84.6.66) |
| 19:09.10 | lusse | ah thanx |
| 19:09.12 | thedicemaster | you just need to plug it in for a minure everytime you want to use android for a longer period of time. |
| 19:09.21 | thedicemaster | while booting |
| 19:10.21 | thedicemaster | insert plug -> boot -> wait untill android shows it's charging -> remove plug |
| 19:10.37 | lusse | got ya! :) |
| 19:10.47 | lusse | still installing and seeing numbers and numbers and more numbers |
| 19:10.50 | thedicemaster | after that your phone will charge like it should untill the next (re)boot |
| 19:11.01 | thedicemaster | shouldn't take that long. |
| 19:11.34 | dwaradzyn | cr2: mddi could be hard for now. disabling serial0 - done. microp-klt: i can add it to switch, but how to test that its working. should brightness control start working after that? |
| 19:11.45 | thedicemaster | it should get to the shiny android bootscreen after 1 or 2 minutes. |
| 19:12.20 | lusse | hmm |
| 19:12.28 | lusse | been about 5-8 minutes now with just numbers :P |
| 19:12.47 | cr2 | dwaradzyn: maybe |
| 19:12.51 | thedicemaster | any repeating text? especially stuff that looks like errors? |
| 19:13.24 | *** join/#htc-linux kvaster (n=kvaster@77.74.36.72) |
| 19:13.53 | lusse | msm_gpio_enter_sleep gpio 0-31: enable 00800 |
| 19:13.59 | lusse | over and over again |
| 19:14.16 | lusse | and msmfb_start_dma 105,3232 ms after vsync reque |
| 19:14.22 | lusse | and those numbers keep adding up ofc |
| 19:14.27 | cr2 | what is 'SurfaceFlinger' ? |
| 19:14.52 | cr2 | lusse: which diam do you have ? |
| 19:15.15 | thedicemaster | RAPH i think? |
| 19:15.27 | lusse | uhm... how do I check? :) |
| 19:15.33 | lusse | it's the first diamond, not diamond2 |
| 19:16.03 | thedicemaster | take off the cover and pull out the battery. |
| 19:16.19 | thedicemaster | you need to return to windows mobile anyway since it's not working for you. |
| 19:16.37 | lusse | oki |
| 19:16.40 | thedicemaster | and under the battery on the back of your phone there should be a text saying DIAM##0 |
| 19:16.49 | lusse | diam100 |
| 19:16.55 | thedicemaster | ##0 is the internal version number. |
| 19:17.08 | thedicemaster | ok, that's the original standard diamond. |
| 19:17.20 | lusse | good or bad? |
| 19:17.27 | thedicemaster | i got the rare DIAM200 |
| 19:17.38 | thedicemaster | that's good, and bad. |
| 19:18.09 | thedicemaster | it means you should have the least amount of problems. however you somehow do have problems. |
| 19:18.26 | lusse | hehe |
| 19:18.31 | thedicemaster | which exact version did you download, and where did you place the files? |
| 19:18.55 | thedicemaster | just tell me the exact folder on your phone haret.exe and zimage are located. |
| 19:19.08 | lusse | android-diam-20090909 |
| 19:19.26 | lusse | it's under "Content" |
| 19:19.32 | lusse | in the internal storage |
| 19:19.34 | lusse | the "bigger" one |
| 19:19.44 | thedicemaster | ohh, there's your problem. |
| 19:19.47 | cr2 | dwaradzyn: i will suggest to mmutrace the DEX command register, and the audio smem area. and to check the AudioPara* |
| 19:20.24 | thedicemaster | the files can't be in a subfolder, you need to put them directly onto your internal storage. |
| 19:20.30 | lusse | ah ok |
| 19:20.33 | cr2 | dwaradzyn: the last one is a bit magic for me too, we need to do some better documentation on it. |
| 19:20.37 | lusse | haret.exe at the root then? |
| 19:21.12 | thedicemaster | you need to put all the android files/folders there. |
| 19:22.11 | thedicemaster | to put it simple, you should've extracted the zip/rar directly onto the internal storage. |
| 19:22.28 | lusse | thank you for taking your time :) |
| 19:22.49 | thedicemaster | it will get messy, but that's just what this android build expects. |
| 19:23.21 | dwaradzyn | cr2: i'll need assistance for that. did not do any mmutrace before. yesterday i replaced all values in AudioPara.c with the ones from AudioPara3.csv from my blac, but no results |
| 19:23.25 | thedicemaster | you got stuck while booting simply because android or haret couldn't find some important files. |
| 19:24.42 | lusse | aha |
| 19:24.54 | lusse | trying again now |
| 19:26.04 | thedicemaster | btw if android asks you to make or login to a google account, hit the back button(the arrow pointing left on your phone) |
| 19:26.48 | thedicemaster | you need internet for that, and setting up internet on android when not using an android phone is a bit tricky. |
| 19:26.50 | lusse | got ya |
| 19:27.03 | lusse | but doable? |
| 19:27.12 | thedicemaster | well, depends. |
| 19:27.17 | Gnutoo | thedicemaster, indeed do you know how to setup it with the usb framework ? |
| 19:27.35 | thedicemaster | doable for me, unfortunately either my carrier or my phone is blocking me. |
| 19:27.55 | thedicemaster | ehh usb? |
| 19:28.16 | cr2 | dwaradzyn: can you send me your wavedev.dll ? |
| 19:28.22 | lusse | but we're talking normal internet right? not wifi |
| 19:28.24 | thedicemaster | only kind of internet on android i've even looked at was through the phone network. |
| 19:28.27 | lusse | cause wifi I can live without |
| 19:28.33 | lusse | oh.... that's bad |
| 19:29.20 | thedicemaster | and either my carrier is too good at hiding their login info, or my phone simply uses slightly different drivers/code for it. |
| 19:29.34 | *** join/#htc-linux x29a_ (n=x29a@unaffiliated/x29a) |
| 19:29.41 | cr2 | thedicemaster: gsm ? |
| 19:29.58 | thedicemaster | yes |
| 19:30.34 | thedicemaster | DIAM200 though, which is a redesign(HTC victor) and has some buttons flipped. |
| 19:30.36 | dwaradzyn | cr2: http://www.privatepaste.com/download/131ZDGSrR9 |
| 19:30.37 | cr2 | thedicemaster: why not to try connect manually ? |
| 19:31.50 | thedicemaster | have you ever had that android suddenly jumped back to the silver android-text bootscreen while playing around with airplane mode? |
| 19:31.54 | dwaradzyn | cr2: in winmo i use srs wow hd, wavedev.dll could be changed by srs |
| 19:32.24 | thedicemaster | like a reboot |
| 19:33.21 | lusse | gonna check true blood and then continue playing with android :D |
| 19:33.23 | lusse | bb in a bit |
| 19:33.29 | lusse | thanx for all the help thedicemaster and cr2 |
| 19:33.49 | cr2 | +call UpdateAudioMethod %d |
| 19:33.49 | thedicemaster | i get that whenever i seem to be close to getting a working data connection. |
| 19:34.30 | thedicemaster | and after that "reboot" i lose the ability to make any connection(even for phonecalls) |
| 19:35.28 | cr2 | thedicemaster: i have connected manually with 'cu' and run pppd on /dev/smd7 |
| 19:36.10 | cr2 | then used ssh to login at remote host and transfer ~20MB or data. everything was working as i have expected. |
| 19:36.29 | thedicemaster | ah sorry, that's above my level of "figure it out on my own skills" so i'd need a guide for that. |
| 19:37.14 | ali1234 | android data connection is really picky |
| 19:37.19 | cr2 | that does not help the android users, but at least i know that at the kernel level the things work properly. |
| 19:37.27 | ali1234 | i can make it work with pppd and chat but not android |
| 19:37.32 | ali1234 | (on wizard) |
| 19:37.57 | cr2 | ali1234: i think you need to reimplement the AT wrapper layer |
| 19:38.13 | ali1234 | cr2: darkstar62 already has, and it works for him but not me |
| 19:38.19 | ali1234 | i can make phonecalls though |
| 19:38.22 | cr2 | weird |
| 19:38.48 | cr2 | ali1234: AT@SVN=1 :) |
| 19:39.18 | ali1234 | yeah :) |
| 19:39.27 | ali1234 | means? |
| 19:39.29 | townkat | dwaradzyn, my wavedev.dll have exactly the same size as yours and i dont have srswow |
| 19:39.33 | cr2 | i doubt that this android ril wrapper implements such things. |
| 19:39.47 | ali1234 | afaik the omap850 radio rom doesn't either |
| 19:40.13 | thedicemaster | cr2 what you just told me, how does that work? |
| 19:40.41 | cr2 | thedicemaster: not in android |
| 19:41.20 | *** join/#htc-linux kvaster (n=kvaster@live.bn.by) |
| 19:42.53 | thedicemaster | is it possible to extract the apn info needed in android from inside windows mobile? |
| 19:43.32 | thedicemaster | out of 6 different sites with carrier apn settings, there are 4-5 different lists of settings. |
| 19:43.43 | thedicemaster | for my carrier. |
| 19:43.49 | thedicemaster | (T-mobile NL) |
| 19:44.46 | thedicemaster | they have auto-configuration SMS services, but those for some reason only work on phones no longer sold. |
| 19:46.20 | cr2 | dwaradzyn: do you have a wired headset ? |
| 19:46.41 | dwaradzyn | cr2: yes, and bt one too |
| 19:47.06 | cr2 | hmm. |
| 19:47.38 | cr2 | maybe we should patch wavedev2 to chose the sound device. |
| 19:48.19 | cr2 | dwaradzyn: dzo has added some code in this area, i need to check the source. |
| 19:48.37 | cr2 | we need to ask dzo about the details |
| 19:49.24 | cr2 | >> |
| 19:49.26 | dwaradzyn | cr2: ok. in the meanwhile i'm trying to test brightness control |
| 19:49.26 | cr2 | >> I hope this helps. |
| 19:49.27 | cr2 | >> |
| 19:49.29 | cr2 | >> Mathias |
| 19:49.30 | cr2 | >> >> |
| 19:49.32 | cr2 | > |
| 19:49.34 | cr2 | --~--~---------~--~----~------------~-------~--~----~ |
| 19:49.35 | cr2 | unsubscribe: android-porting+unsubscr...@googlegroups.com |
| 19:49.37 | cr2 | website: http://groups.google.com/group/android-porting |
| 19:49.38 | cr2 | -~----------~----~----~----~------~----~------~--~--- |
| 19:49.40 | cr2 | <PROTECTED> |
| 19:49.41 | cr2 | <PROTECTED> |
| 19:49.43 | cr2 | <PROTECTED> |
| 19:49.44 | cr2 | <PROTECTED> |
| 19:49.46 | cr2 | <PROTECTED> |
| 19:49.47 | cr2 | <PROTECTED> |
| 19:49.49 | cr2 | <PROTECTED> |
| 19:49.50 | cr2 | <PROTECTED> |
| 19:49.51 | *** join/#htc-linux balans (n=Administ@212-123-149-239.ip.telfort.nl) |
| 19:49.51 | cr2 | <PROTECTED> |
| 19:49.53 | cr2 | <PROTECTED> |
| 19:49.55 | cr2 | err |
| 19:49.57 | cr2 | does it work ? |
| 19:51.47 | dwaradzyn | cr2: dmesg looks fine (no info about unsupported hw) and it booted, trying android now |
| 19:52.21 | *** join/#htc-linux BabelO (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
| 19:52.42 | cr2 | hi BabelO |
| 19:52.59 | BabelO | hi cr2 |
| 19:53.25 | mdrobnak | cr2: Wifi ? Yeah, no idea. lol. Last I heard someone was working on the driver, but I have no idea why it says that. |
| 19:54.11 | mdrobnak | cr2: SurfaceFlinger is the thing that handles all the screen updates in Android |
| 19:54.24 | cr2 | BabelO: do you have your old qtextended patches somewhere ? |
| 19:54.56 | dwaradzyn | cr2: brightness control works in android :) |
| 19:55.00 | cr2 | mdrobnak: yeah. the crash is in some murky android internals, so i think i'd just give up. |
| 19:55.08 | cr2 | dwaradzyn: nice :) |
| 19:55.35 | thedicemaster | android is still so unstable on the diamond. it freezes during boot only because of some data-connection settings. |
| 19:56.11 | cr2 | mdrobnak: can you disblae the 3D modules, and settings |
| 19:56.18 | cr2 | mdrobnak: and IMEM clock |
| 19:57.08 | mdrobnak | scratches head. |
| 19:57.11 | mdrobnak | Not sure? lol |
| 19:58.26 | mdrobnak | thedicemaster: if it goes back to the black screen, that means the main process has died. |
| 19:58.42 | mdrobnak | thedicemaster: Possibly from lack of ram. You should run logcat on it. |
| 19:59.39 | *** join/#htc-linux cr2 (n=cr2@109.84.6.66) |
| 20:00.50 | mdrobnak | I know there is no HAL for the 3D, so it does software rendering. Next to do is the memtest fillmem. (about to connect it up now) |
| 20:01.03 | mdrobnak | s/HAL/hardware driver/g |
| 20:01.37 | cr2 | mdrobnak: you are using this opengl module and get a crash. |
| 20:01.45 | BabelO | cr2: no the server is no more available, i will look later on my backup disk |
| 20:01.51 | thedicemaster | android also sometimes seems to forget rto load some hardware-button stuff |
| 20:01.52 | mdrobnak | I am? which module? |
| 20:02.16 | cr2 | NetRipper has said many months ago that android crashes on raph100 with the second ram bank enabled |
| 20:02.22 | *** join/#htc-linux balans (n=Administ@212-123-149-239.ip.telfort.nl) |
| 20:03.09 | cr2 | I/SurfaceFlinger( 570): OpenGL informations: |
| 20:03.10 | cr2 | I/SurfaceFlinger( 570): vendor : Android |
| 20:03.12 | cr2 | I/SurfaceFlinger( 570): renderer : Android PixelFlinger 1.0 |
| 20:03.13 | cr2 | I/SurfaceFlinger( 570): version : OpenGL ES-CM 1.0 |
| 20:03.27 | cr2 | BabelO: the server ? |
| 20:04.08 | cr2 | BabelO: i hope to do something non-kernel related soon :) |
| 20:04.43 | mdrobnak | cr2: So you think it's related to memory mapping with the OpenGL? |
| 20:05.23 | cr2 | mdrobnak: are there any android phones with 2 banks ? i can grep you the reply from swetland, that they do not support it. |
| 20:05.46 | mdrobnak | Oh, that's interesting, and dissapointing. |
| 20:06.03 | *** join/#htc-linux x29a (n=x29a@unaffiliated/x29a) |
| 20:06.16 | ali1234 | why is android even seeing the physical ram layout? |
| 20:06.23 | ali1234 | should the kernel hide all that? |
| 20:06.35 | mdrobnak | cr2: Ok, so memtest's fillmem runs through 128M no problems. |
| 20:06.45 | cr2 | ali1234: they do it in userspace driver |
| 20:07.06 | ali1234 | sounds like a bad bad hack to me |
| 20:07.14 | cr2 | ali1234: it's the nvidia x86 closed source kernel driver story oce again |
| 20:07.43 | ali1234 | this is only related to graphics? |
| 20:08.05 | cr2 | ali1234: afair the answer was "tainted kernel" includes nvidia driver -> go away with bug report :) |
| 20:08.25 | cr2 | it's opengl driver |
| 20:08.30 | ali1234 | ah |
| 20:08.34 | cr2 | the framebuffer driver is gpl |
| 20:08.37 | ali1234 | yeah, always problematic |
| 20:08.49 | mdrobnak | Crap. Anyone have a mirror of the memtest program? |
| 20:08.57 | ali1234 | but, you don't need opengl for android :) |
| 20:09.00 | mdrobnak | The original place I downloaded it from is down...and it's on the other HD |
| 20:09.23 | cr2 | ali1234: tell that to mdrobnak |
| 20:10.06 | mdrobnak | ali1234: Where do you disable it? |
| 20:10.07 | cr2 | ali1234: the 2D accel fb bitblitter will be nice. but only as free software. |
| 20:10.42 | ali1234 | mdrobnak: you don't need opengl support for android (?) |
| 20:10.50 | mdrobnak | LOL |
| 20:11.53 | ali1234 | no idea |
| 20:12.09 | ali1234 | only versions of android i have run have not required to turn off any opengl, because it wasn't turned on in the first place? |
| 20:12.21 | ali1234 | all they needed is a /dev/fb0 |
| 20:12.21 | cr2 | yeah |
| 20:13.01 | mdrobnak | I'm using the Google Ion build, the same one everyone else is. |
| 20:13.07 | cr2 | mdrobnak: but it crashed for NetRipper already at a time when we didn't have any opengl |
| 20:13.16 | ali1234 | never heard of it |
| 20:13.36 | Marajin | ali1234: HTC Hero version of android, basically.. android 1.5 I think |
| 20:13.41 | ali1234 | i've run android on my netbook and on my wizard, both were compiled from source, not some hacked rom |
| 20:13.50 | cr2 | lol |
| 20:14.30 | cr2 | ali1234: then you don't have camera,gps and opengl ? and phone of course. and working sound :) |
| 20:14.49 | cr2 | because all these libs are closed source |
| 20:14.50 | ali1234 | we dont have gps or opengl anyway |
| 20:15.08 | cr2 | opengl on msm is in software anyway. |
| 20:15.21 | ali1234 | lol, what's the point of it then? |
| 20:15.24 | cr2 | and gps is really shitty. |
| 20:15.25 | *** join/#htc-linux kvaster (n=kvaster@77.74.36.72) |
| 20:15.33 | ali1234 | phone works |
| 20:15.38 | ali1234 | sound nearly works |
| 20:15.54 | ali1234 | the whole point of switching to 2.6.31 on omap was to get alsa soc support |
| 20:15.54 | cr2 | ali1234: it has some hw support though. but still not real hw opengl |
| 20:16.10 | cr2 | ok |
| 20:16.36 | ali1234 | and i just finished cleaning that up so it actually works |
| 20:16.48 | cr2 | ali1234: but how do you deal with /dev/msm_mp3 and such thngs ? |
| 20:16.55 | ali1234 | google is using CONFIG_ARCH_OMAP730 for OMAP850 boards, for no good reason |
| 20:16.59 | dwaradzyn | cr2: there are indeed problems with mddi on blac. it hangs quite often on installing panel. the init code is black magic for me - dma + many magic values |
| 20:17.24 | ali1234 | cr2: we don't deal with them? we write a kernel, darkstar62 did the android port including a custom RIL for OMAP |
| 20:17.46 | cr2 | dwaradzyn: epson provides software and headers for the registers |
| 20:17.56 | ali1234 | i dont even know what /dev/msm_mp3 is |
| 20:18.06 | cr2 | ali1234: but ril != sound |
| 20:18.16 | ali1234 | yeah |
| 20:18.22 | ali1234 | we dont have working sound yet |
| 20:18.25 | cr2 | ali1234: hardware accelerated mp3 player :) |
| 20:18.28 | ali1234 | when we do, it will be via alsa soc |
| 20:18.55 | cr2 | ok |
| 20:18.55 | ali1234 | and then it will be down to someone to make a alsa wrapper for android |
| 20:18.55 | ali1234 | but that isn't my problem :) |
| 20:19.03 | cr2 | ali1234: you just upload .mp3 to a custom dsp with /dev/msm_mp3 |
| 20:19.17 | cr2 | we were wondering if it will work with alsa |
| 20:19.18 | ali1234 | yeah, omap7xx doesnt have that anyway |
| 20:19.30 | *** join/#htc-linux kvaster (n=kvaster@live.bn.by) |
| 20:20.10 | cr2 | ali1234: yeah, omap7xx is at the bottom of the foodchain :) |
| 20:20.30 | ali1234 | yeah, i dont care though, i think it;s better than MSM :) |
| 20:20.43 | cr2 | :D |
| 20:20.48 | *** join/#htc-linux root2 (n=root@rgnb-5d87de3a.pool.mediaWays.net) |
| 20:20.54 | townkat | cr, what is mmutracing ? |
| 20:21.14 | townkat | cr2 |
| 20:21.19 | mdrobnak | cr2: Did that mmu dump help? |
| 20:21.22 | cr2 | townkat: tracing the accesses to some virtual memory range |
| 20:21.23 | mdrobnak | or point to anything? |
| 20:21.40 | cr2 | mdrobnak: there is nothing unusual there too |
| 20:22.02 | townkat | we need to mmutrace in winmo? |
| 20:22.15 | ali1234 | speaking of MMU, i got a weird early kernel problem ... Image and zImage both boot from haret, but with EOL, only zImage works, Image hangs when turning on MMU. so i guess some init is missing in EOL? any ideas? |
| 20:22.17 | mdrobnak | This isn't cool. The system.img file is a cramfs, which means I can't modify anything. |
| 20:22.26 | cr2 | mdrobnak: there are some hard limits for the first bank, but we can try to extend the available memory |
| 20:22.29 | ali1234 | mdrobnak: just unpack and repack it |
| 20:23.51 | cr2 | ali1234: EOL is very omap-specific. last time i've looked at it it was 0.5 |
| 20:23.52 | mdrobnak | ali1234, so just copy to dir, edit, re-generate? |
| 20:24.08 | ali1234 | cr2: yes, but the problem is ARM specific, and MMU related |
| 20:24.28 | ali1234 | question is, why does zImage work but Image doesn't? |
| 20:24.43 | cr2 | Image is big ? |
| 20:24.50 | ali1234 | not particularly |
| 20:24.53 | ali1234 | and it works with haret |
| 20:25.03 | ali1234 | and eol takes up to 5mb kernels |
| 20:25.05 | cr2 | there are some limits on the kernel size |
| 20:25.28 | ali1234 | Image is about 2MB i think, zImage is 1.5MB |
| 20:25.33 | cr2 | zimage relocates itself and does a lot of things. |
| 20:25.44 | ali1234 | yeah, i gather |
| 20:25.51 | ali1234 | it must be related |
| 20:25.57 | cr2 | ali1234: i would guess there is some hidden size limit |
| 20:26.10 | ali1234 | it isn't so important now i fixed the zImage code on OMAP properly |
| 20:26.20 | cr2 | ok |
| 20:26.59 | cr2 | i'll go with zimage, unless you do xip anyway |
| 20:27.23 | cr2 | and for xip you need ext2 afair |
| 20:27.39 | ali1234 | we don't/can't |
| 20:28.28 | ali1234 | i have a massive patch set that cleans up omap7xx and makes omap850 support work properly |
| 20:28.38 | ali1234 | 27 files changed, 481 insertions(+), 885 deletions(-) |
| 20:28.50 | ali1234 | it doesn't even change the functionality at all |
| 20:28.58 | ali1234 | it just cleans up the mess :/ |
| 20:29.11 | ali1234 | and that's all you actually need to make 850 support work |
| 20:29.17 | cr2 | ali1234: will it ever be merged into mainline ? |
| 20:29.24 | ali1234 | dunno, but i hope so |
| 20:29.30 | ali1234 | i only did it yesterday |
| 20:29.39 | ali1234 | i finally got tired of working around the bugs |
| 20:29.41 | cr2 | ok |
| 20:30.19 | cr2 | i still remember the days when we were peeking in the artemis spl with BabelO, without any omap docs ;) |
| 20:30.21 | ali1234 | if it was up to me, i'd merge it :) |
| 20:30.41 | ali1234 | what we know know that we didnt know then, is that 730 and 850 are 99.99% the same |
| 20:31.06 | ali1234 | unfortunately before that was known someone split the code into two sets, one for each |
| 20:31.26 | ali1234 | so eg you have omap730.h and omap850.h which are identical except for s/730/850/g |
| 20:31.42 | cr2 | 730 was the devboard code from tI, and it was really obfuscated. |
| 20:31.43 | ali1234 | that was causing endless bugs when the code was supposed to be the same, but wasn;t |
| 20:31.55 | cr2 | like we have it with msm now. |
| 20:32.06 | ali1234 | there are 730 based phones too |
| 20:32.26 | ali1234 | anyway, all our 850 support was copy pasted from 730 stuff |
| 20:32.33 | cr2 | yes, but they all were doing some magic bitflips here and there. |
| 20:32.43 | ali1234 | those have been all cleaned up |
| 20:32.51 | cr2 | ok |
| 20:32.51 | ali1234 | there is not much of that left now |
| 20:33.12 | ali1234 | some TI guys are on linux-omap ML and contribute patches |
| 20:33.20 | ali1234 | but only to the 730 code, not the 850 code |
| 20:33.25 | ali1234 | (which should be identical anyway) |
| 20:33.27 | cr2 | hehe |
| 20:33.32 | ali1234 | so, i raged, and merged it all into omap7xx |
| 20:33.48 | ali1234 | now it "just works" |
| 20:33.59 | cr2 | great |
| 20:34.13 | *** join/#htc-linux pronik (n=user@g229120008.adsl.alicedsl.de) |
| 20:34.15 | thedicemaster | i'm giving up on data-connection for today. got the info directly from someone's G1 settings, but now the APN list refuses to show the settings i configured. |
| 20:34.32 | cr2 | <PROTECTED> |
| 20:34.53 | cr2 | 64, not 66 ;) |
| 20:34.59 | cr2 | says g1 |
| 20:36.13 | cr2 | rs30000048:0da5b528: setting system clock |
| 20:39.47 | cr2 | clk_get(vfe_mdc_clk) |
| 20:39.55 | cr2 | clk_get(mdc_clk |
| 20:40.01 | cr2 | clk_get(vfe_clk) |
| 20:40.33 | cr2 | 33,28 and 29 probably |
| 20:41.48 | cr2 | dwaradzyn: what are these : |
| 20:41.52 | cr2 | \Windows\AudioPreProcessTable.csv |
| 20:41.54 | cr2 | \Windows\AudioPreProcessTableCal.csv |
| 20:42.05 | cr2 | \Windows\AudioFilterTable.csv |
| 20:42.06 | cr2 | \Windows\AudioFilterTableCal.csv |
| 20:44.15 | cr2 | Phone Acoustic Table: %d |
| 20:44.16 | cr2 | BT Acoustic Table: %d(%s) |
| 20:44.18 | cr2 | BT Phone Acoustic Table: %d |
| 20:48.52 | cr2 | http://focus.ti.com/docs/prod/folders/print/tpa2016d2.html ? |
| 20:49.23 | cr2 | I2C1: |
| 20:49.25 | cr2 | +Write_TPA2016 reg:%x, data:%x |
| 20:49.27 | cr2 | hmm |
| 20:49.35 | cr2 | dwaradzyn: still here ? |
| 20:49.52 | dwaradzyn | cr2: can't find the ones you are asking. all csv are at http://rapidshare.com/files/187589408/blackstone_windows_csv.zip |
| 20:51.13 | cr2 | dwaradzyn: can you trace i2c while playing sound ? |
| 20:51.33 | dwaradzyn | cr2: i could try with a little help :) |
| 20:52.18 | dwaradzyn | what should i play? anything? |
| 20:52.25 | cr2 | http://focus.ti.com/lit/ug/slou201/slou201.pdf |
| 20:52.33 | cr2 | yes. |
| 20:52.58 | cr2 | if you have an external speaker amplifier, that becomes interesting. |
| 20:55.04 | dwaradzyn | i do have |
| 20:55.05 | cr2 | http://focus.ti.com/lit/ds/symlink/tpa2016d2.pdf |
| 20:56.11 | *** join/#htc-linux randomblame (n=randombl@97-113-239-206.tukw.qwest.net) |
| 20:57.20 | cr2 | 0xb0/2 should be the id |
| 20:57.30 | randomblame | hey hey hey |
| 20:57.47 | cr2 | it 's a stereo amplifier. |
| 20:58.02 | cr2 | may be for the wired headset only |
| 20:59.56 | randomblame | hey cr2 were you still wanting to decode those rpcs for the incite? Im not on my system but if you wanted to post them to wiki id be forever grateful |
| 21:01.29 | Gnutoo | mmm I changed kernel and defconfig I now have: |
| 21:01.30 | Gnutoo | xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory) |
| 21:01.34 | Gnutoo | I've support for : |
| 21:01.37 | Gnutoo | android console |
| 21:01.40 | Gnutoo | pty98 |
| 21:01.57 | Gnutoo | CONFIG_LEGACY_PTYS |
| 21:02.07 | Gnutoo | CONFIG_LEGACY_PTY_COUNT=256 |
| 21:02.19 | *** join/#htc-linux Captnoord (n=Captnoor@dc5147a47b.adsl.wanadoo.nl) |
| 21:02.23 | Gnutoo | what could be the problem? |
| 21:02.29 | randomblame | hey capt |
| 21:05.07 | randomblame | gnutoo I'm having a zillion problems still too |
| 21:05.14 | randomblame | maybe we should make a sacrifice to the linux gods |
| 21:05.28 | Gnutoo | randomblame, ok |
| 21:05.37 | randomblame | burn an old windows disk that should do the trick |
| 21:05.43 | Gnutoo | ok |
| 21:05.55 | Gnutoo | then I call the firemans? |
| 21:06.12 | dwaradzyn | cr2: what command in haret will start tracing i2c? |
| 21:06.12 | randomblame | if you want to... lol |
| 21:07.58 | cr2 | dwaradzyn: connect 2 haret |
| 21:08.06 | dwaradzyn | done |
| 21:12.19 | randomblame | so I installed virtual box last night with ubuntu as guest |
| 21:12.29 | randomblame | has anyone gotten samba to work with windows 7 yet? |
| 21:12.30 | cr2 | listen 9998 |
| 21:12.55 | cr2 | hmm. your playsound will probably not w ork |
| 21:12.57 | dwaradzyn | ok, hourglass on screen |
| 21:13.40 | cr2 | addlist mmutrace 0xb2300000 4 |
| 21:13.51 | cr2 | addlist mmutrace 0xb230000c 4 |
| 21:14.01 | cr2 | wi 2 |
| 21:14.27 | Captnoord | randomblame: sssssssttt my girl is sleeping..... |
| 21:14.29 | Captnoord | :P |
| 21:14.35 | Captnoord | and I don't want to wake her |
| 21:14.40 | Captnoord | she's tired |
| 21:15.09 | dwaradzyn | cr2: http://www.privatepaste.com/01CMODKly3 |
| 21:16.03 | cr2 | dwaradzyn: you should use haretconsole, to reduce spam |
| 21:17.04 | cr2 | yeah, mov r3, 0xb0 |
| 21:17.12 | randomblame | lol I know whats really going on - if she wakes up she'll make you get off the computer |
| 21:17.24 | randomblame | I have a wife I know |
| 21:17.31 | cr2 | refreshspeakerAGC |
| 21:17.31 | dwaradzyn | cr2: i'm using haretconsole, i pasted from its logfile |
| 21:17.44 | Captnoord | randomblame: nope.... |
| 21:17.50 | *** join/#htc-linux Untouchab1e (n=Untoucha@cm-84.209.89.86.getinternet.no) |
| 21:17.52 | Captnoord | thats never the problem... |
| 21:17.53 | cr2 | dwaradzyn: mask the spamming bits |
| 21:17.55 | randomblame | what? luckyyy |
| 21:17.56 | Captnoord | if there is any |
| 21:19.26 | randomblame | we just had a baby last month - I've discovered it is difficult to type with him |
| 21:20.02 | randomblame | *in my lap |
| 21:20.23 | Untouchab1e | randomblame: congrats :) |
| 21:20.26 | cr2 | dwaradzyn: can you play sound ? after masking the spam, use 'wi 60' or so |
| 21:20.36 | cr2 | and play |
| 21:20.51 | dwaradzyn | cr2: ok |
| 21:20.54 | cr2 | there is a command in haret to play a sound, but it's broken for msm |
| 21:21.03 | dwaradzyn | it worked for me |
| 21:21.05 | randomblame | thanks - he's adorable but he's squirmy and constantly wants "something" |
| 21:21.43 | randomblame | it's usually a boob that he wants but since I have none to offer he doesn't like me as much as his mom |
| 21:21.53 | cr2 | dwaradzyn: the spekaerAGC uses this amplifier, and the i2c id is 0xb0/2. |
| 21:22.15 | cr2 | but i don't know which speaker do they mean. |
| 21:23.42 | cr2 | dwaradzyn: no such code for raph100 |
| 21:26.40 | dwaradzyn | cr2: currently i'm not playing sound and "wi 2" command produces a lot of lines with "IRQS IRQ1: GPIO2(33)=1". that means that i should do "ibit gpios 33" ? |
| 21:27.32 | cr2 | yes |
| 21:27.45 | cr2 | gpio0x39. hmm |
| 21:28.17 | cr2 | tvout enable on raph100 |
| 21:28.55 | cr2 | hehe. speaker_pwr_handler :) |
| 21:29.15 | cr2 | dwaradzyn: you may trace gpios too, while playing sound |
| 21:29.27 | boli^ | what are you guys doing at the moment |
| 21:29.41 | dwaradzyn | the one i pasted was with sound played |
| 21:29.44 | Gnutoo | I think I solved my issue with Xorg...let's see at next boot |
| 21:29.47 | boli^ | (the short version) |
| 21:30.36 | dwaradzyn | cr2: i understand that you asked me to remove spam when no sound played, and then run the trace with sound on |
| 21:31.33 | cr2 | no, play sound while tracing is on |
| 21:31.52 | mdrobnak | cr2: Interesting development. Removed GL libraries. *It resets itself now* |
| 21:32.03 | cr2 | then you may see i2c commands being sent on init |
| 21:32.13 | mdrobnak | (Pardon the spam) |
| 21:32.15 | dwaradzyn | boli^: i have a blac100 device and muscles and cr2 has the brain :) we are trying to make some sound working under linux for blac100 |
| 21:32.24 | mdrobnak | 09-19 13:31:07.331 I/SurfaceFlinger( 137): SurfaceFlinger is starting |
| 21:32.24 | mdrobnak | 09-19 13:31:07.331 I/SurfaceFlinger( 137): SurfaceFlinger's main thread ready to run. Initializing graphics H/W... |
| 21:32.24 | mdrobnak | 09-19 13:31:07.331 E/SurfaceFlinger( 137): Couldn't open /sys/power/wait_for_fb_sleep or /sys/power/wait_for_fb_wake |
| 21:32.24 | mdrobnak | 09-19 13:31:07.511 D/SurfaceFlinger( 137): pid 137 requesting gpu core (owner = -1) |
| 21:32.25 | mdrobnak | 09-19 13:31:07.511 W/SurfaceFlinger( 137): couldn't grant gpu core to pid 137 |
| 21:32.27 | mdrobnak | 09-19 13:31:07.511 D/EGL ( 137): requestGPU returned -1 |
| 21:32.29 | mdrobnak | 09-19 13:31:07.521 E/GLLogger( 137): h/w accelerated eglGetDisplay() failed (EGL_SUCCESS) |
| 21:32.31 | mdrobnak | 09-19 13:31:07.521 I/SurfaceFlinger( 137): EGL informations: |
| 21:32.35 | mdrobnak | 09-19 13:31:07.521 I/SurfaceFlinger( 137): # of configs : 6 |
| 21:32.37 | mdrobnak | 09-19 13:31:07.521 I/SurfaceFlinger( 137): vendor : Android |
| 21:32.39 | boli^ | cool. just wondered... |
| 21:32.39 | mdrobnak | 09-19 13:31:07.521 I/SurfaceFlinger( 137): version : 1.31 Android META-EGL |
| 21:32.41 | mdrobnak | 09-19 13:31:07.521 I/SurfaceFlinger( 137): extensions: |
| 21:32.43 | mdrobnak | 09-19 13:31:07.521 I/SurfaceFlinger( 137): Client API: OpenGL ES |
| 21:32.45 | mdrobnak | 09-19 13:31:07.521 I/EGLDisplaySurface( 137): using (fd=22) |
| 21:32.47 | mdrobnak | 09-19 13:31:07.521 I/EGLDisplaySurface( 137): id = msmfb |
| 21:32.49 | mdrobnak | 09-19 13:31:07.521 I/EGLDisplaySurface( 137): xres = 480 px |
| 21:32.51 | mdrobnak | 09-19 13:31:07.521 I/EGLDisplaySurface( 137): yres = 640 px |
| 21:32.53 | mdrobnak | 09-19 13:31:07.521 I/EGLDisplaySurface( 137): xres_virtual = 480 px |
| 21:32.55 | mdrobnak | 09-19 13:31:07.521 I/EGLDisplaySurface( 137): yres_virtual = 1280 px |
| 21:32.57 | mdrobnak | 09-19 13:31:07.521 I/EGLDisplaySurface( 137): bpp = 16 |
| 21:32.59 | mdrobnak | 09-19 13:31:07.521 I/EGLDisplaySurface( 137): r = 11:5 |
| 21:33.01 | mdrobnak | 09-19 13:31:07.521 I/EGLDisplaySurface( 137): g = 5:6 |
| 21:33.05 | mdrobnak | 09-19 13:31:07.521 I/EGLDisplaySurface( 137): b = 0:5 |
| 21:33.07 | mdrobnak | 09-19 13:31:07.521 I/EGLDisplaySurface( 137): width = 76 mm (160.421051 dpi) |
| 21:33.09 | mdrobnak | 09-19 13:31:07.521 I/EGLDisplaySurface( 137): height = 102 mm (159.372543 dpi) |
| 21:33.11 | mdrobnak | 09-19 13:31:07.521 I/EGLDisplaySurface( 137): refresh rate = 60.00 Hz |
| 21:35.03 | cr2 | mdrobnak: SurfaceFlinger( 137): Client API: OpenGL ES |
| 21:35.27 | cr2 | mdrobnak: you are still doing something wrong in the config |
| 21:35.46 | cr2 | dwaradzyn: i suspect that you need to pull gpio 0x39 =1 |
| 21:36.08 | cr2 | dwaradzyn: what is the gpio 0x29 value with sound off, and sound on ? |
| 21:37.30 | cr2 | s/0x29/0x39/ |
| 21:39.56 | dwaradzyn | cr2: i haven't used haret for that yet. how do i do it? |
| 21:41.10 | cr2 | watch gpios 0 |
| 21:43.07 | dwaradzyn | http://www.privatepaste.com/671RflzwWg |
| 21:44.08 | cr2 | 57 0x39 14 |
| 21:44.13 | cr2 | bank2 |
| 21:44.42 | cr2 | out2-1=1 out2-17=1 out2-18=1 |
| 21:44.49 | cr2 | it is =0 |
| 21:44.58 | cr2 | sound on or off ? |
| 21:48.01 | mdrobnak | cr2: But it's meta egl, which should be software, no? |
| 21:48.25 | cr2 | mdrobnak: no idea |
| 21:48.37 | mdrobnak | I'm gonna get the dmesg, then try it again with the old system.img |
| 21:49.29 | cr2 | dwaradzyn: you have 'playing sound' there |
| 21:50.24 | dwaradzyn | cr2: i pasted two outputs for sound and after a few empty lines for no sound |
| 21:52.04 | cr2 | out2-1=1 out2-17=1 out2-18=1 |
| 21:52.04 | mdrobnak | cr2: http://pastebin.com/d11b49c93 Don't think there's anything new here. |
| 21:52.42 | cr2 | ok, so it's something else |
| 21:53.33 | cr2 | mdrobnak: ok |
| 21:53.53 | mdrobnak | cr2: You're correct. No difference, and it rebooted. Oops. |
| 21:53.54 | cr2 | mdrobnak: the source for mediaserver ? i'm curious what is dev=29 |
| 21:54.41 | mdrobnak | Yes. |
| 21:55.05 | mdrobnak | int main(int argc, char** argv) |
| 21:55.05 | mdrobnak | { |
| 21:55.05 | mdrobnak | <PROTECTED> |
| 21:55.05 | mdrobnak | <PROTECTED> |
| 21:55.06 | mdrobnak | <PROTECTED> |
| 21:55.06 | mdrobnak | <PROTECTED> |
| 21:55.08 | mdrobnak | <PROTECTED> |
| 21:55.10 | mdrobnak | <PROTECTED> |
| 21:55.12 | mdrobnak | <PROTECTED> |
| 21:55.14 | mdrobnak | <PROTECTED> |
| 21:55.16 | mdrobnak | } |
| 21:55.18 | mdrobnak | That's what mediaserver does. |
| 21:55.20 | *** join/#htc-linux Sleep_Walker (n=Sleep@1.57.broadband2.iol.cz) |
| 21:55.32 | Sleep_Walker | hi |
| 21:55.54 | Sleep_Walker | cr2: may I bother you for a while? |
| 21:56.09 | Sleep_Walker | cr2: I'm trying to make my GSM chip working... |
| 21:56.16 | Sleep_Walker | BCM2133 |
| 21:56.42 | *** join/#htc-linux N16-Kaiser (n=ace@79-67-185-129.dynamic.dsl.as9105.com) |
| 21:56.59 | mdrobnak | cr2: AudioFlinger can be compiled to log all routing calls, |
| 21:57.02 | cr2 | mdrobnak: link ? |
| 21:57.31 | N16-Kaiser | hi |
| 21:57.42 | cr2 | Sleep_Walker: never worked with it :) |
| 21:57.53 | N16-Kaiser | where can i find info on reading haret traces? |
| 21:58.15 | mdrobnak | It's in the android git. one sec. |
| 21:58.29 | Sleep_Walker | cr2: well, it is probably not needed |
| 21:58.41 | Sleep_Walker | cr2: 1] do you know AT*MGPIO command? |
| 21:58.53 | cr2 | Sleep_Walker: no |
| 21:58.55 | Sleep_Walker | I can't find its syntax anywhere |
| 21:59.00 | Sleep_Walker | cr2: ok |
| 21:59.13 | cr2 | Sleep_Walker: how is AT talked to the chp ? |
| 21:59.26 | Sleep_Walker | through serial port |
| 21:59.36 | cr2 | which host cpu ? |
| 21:59.42 | Sleep_Walker | PXA270 |
| 21:59.49 | cr2 | trace it in haret |
| 21:59.50 | mdrobnak | cr2: Interestingly theres some ALSA stuff in the Android git. |
| 21:59.55 | Sleep_Walker | cr2: 2] when I power it up and reset it, I can talk to that chip for about 10 seconds, then it goes to sleep |
| 22:00.15 | cr2 | Sleep_Walker: there is an example in the haret doc. with the parser. |
| 22:00.18 | Sleep_Walker | cr2: not Windows 'powered' device :) |
| 22:00.38 | Sleep_Walker | PalmOS one |
| 22:00.40 | cr2 | Sleep_Walker: ok. dump the firmware ? |
| 22:00.57 | mdrobnak | cr2: http://android.git.kernel.org/?p=platform/frameworks/base.git;a=tree;f=libs/audioflinger;h=b8caec1913baf4f98fb32b65f35a6e8b9cb670a7;hb=refs/heads/cupcake-release |
| 22:00.58 | Sleep_Walker | of GSM chip or of PalmOS? |
| 22:01.11 | cr2 | there was a bootloader like haret for palmos |
| 22:01.15 | cr2 | garux ? |
| 22:01.26 | Sleep_Walker | yes, replaced by cocoboot |
| 22:01.33 | cr2 | Sleep_Walker: no, palmos |
| 22:01.53 | Sleep_Walker | I've got PalmOS binaries - it's accessible from PalmOS |
| 22:02.10 | Sleep_Walker | I used strings for that - that's how I found this command |
| 22:02.22 | cr2 | Sleep_Walker: pxa270 supports hardware debugger. but i guess you need Kevin2 for that :) |
| 22:03.07 | Sleep_Walker | heh, well, my skills are not enough for such debugging or even soldering it |
| 22:03.20 | Sleep_Walker | I would brick that device |
| 22:03.26 | cr2 | it's in software |
| 22:03.44 | cr2 | was implemented in haret long ago. |
| 22:03.58 | cr2 | but it's a custom OS irq handler |
| 22:04.14 | cr2 | don't know if you can replace that for palmos |
| 22:04.35 | cr2 | does ida support palm binaries ? |
| 22:05.22 | Sleep_Walker | I don't know |
| 22:05.26 | Sleep_Walker | marex: does it? |
| 22:05.42 | mdrobnak | cr2: AudiohardwareInterface.cpp was the file I was looking at. Going to try and rebuild it with logging on. |
| 22:05.49 | marex | Sleep_Walker, what? |
| 22:05.59 | Sleep_Walker | marex: does IDA support PalmOS binaries? |
| 22:06.11 | marex | yeah, how should I know? |
| 22:07.24 | Sleep_Walker | marex: ah sorry, I thought that you was asking same question |
| 22:07.37 | Sleep_Walker | np |
| 22:07.43 | cr2 | .prc palm pilot |
| 22:07.52 | cr2 | but mine is very old |
| 22:08.09 | marex | cr2, it can do palmos binaries from what I heard |
| 22:08.41 | marex | (the .ua branch of HnD used that to analyze bluetooth drivers iirc) |
| 22:09.35 | mdrobnak | I'm out for now. |
| 22:09.59 | Sleep_Walker | cr2: it doesn't change its format for long time |
| 22:10.05 | Sleep_Walker | *it didn't |
| 22:11.20 | marex | cr2, you can read the irq handler address from coprocessor |
| 22:13.30 | Sleep_Walker | well I had in mind idea to create replacement for serial port send function to see what happens :) |
| 22:13.41 | Sleep_Walker | but I never know how can I do it :b |
| 22:15.51 | dwaradzyn | cr2: did you receive my private message? |
| 22:17.02 | *** join/#htc-linux miknix (n=miknix@gentoo/developer/miknix) |
| 22:25.41 | *** join/#htc-linux leaigor (n=laigor@188.134.36.14) |