| 00:00.09 | cr2 | maejrep: battery monitor and battery charging are 2 different drivers |
| 00:00.18 | cr2 | you are doing the monitor ? |
| 00:00.54 | maejrep | it's the same driver that does both |
| 00:01.37 | maejrep | it doesn't have a timer polling or anything though, it only polls when it's queried |
| 00:01.54 | maejrep | but i would think that android would do that |
| 00:02.02 | maejrep | ie, poll the device node every 10sec or so |
| 00:04.27 | cr2 | ok |
| 00:05.09 | maejrep | cr2: what would coulomb convert to as far as charge? |
| 00:05.36 | cr2 | pda_power implements the usb/ac, enable and detect |
| 00:05.49 | cr2 | C=Ah |
| 00:06.12 | maejrep | so, 1965C = 0.47Ah |
| 00:06.17 | maejrep | what does that mean for capacity? |
| 00:06.35 | cr2 | C=As=Ah/3600 |
| 00:07.15 | cr2 | hmm |
| 00:07.16 | maejrep | i don't even know for sure that the value we get is coulomb |
| 00:07.21 | cr2 | h=3600s |
| 00:07.32 | maejrep | but I see that in the wince dmesg |
| 00:07.43 | maejrep | root@htcraphael:~# cat /sys/devices/platform/htc_battery/power_supply\:battery/b |
| 00:07.43 | maejrep | att_current |
| 00:07.43 | maejrep | 1668 |
| 00:07.46 | cr2 | you measure the current |
| 00:08.14 | cr2 | if you are integrating curretn over time, you get C=As |
| 00:08.16 | maejrep | but is it in amps? |
| 00:08.28 | cr2 | C=\int I*dt |
| 00:08.47 | cr2 | I is in A, dt is in s (or hours) |
| 00:08.59 | cr2 | so C is in Ah, or mAh, or As |
| 00:09.09 | maejrep | the problem I have is that I really don't know what the value in smem represents |
| 00:09.12 | cr2 | the curretn is in Amps |
| 00:09.26 | cr2 | the write "charge" |
| 00:09.38 | maejrep | to me its just a number, but I don't know if it's in amps, mA, just an ADC value that has no meaning without a formula, etc |
| 00:09.40 | cr2 | does it change strongly over time ? |
| 00:09.58 | maejrep | well I am always connected to usb, so it's always trickle charging |
| 00:09.59 | cr2 | ok, save the time & value |
| 00:10.04 | maejrep | it goes up and down |
| 00:10.19 | cr2 | charge should not go fast up/down |
| 00:10.22 | maejrep | e.g.: 1668,1685,1689,1627 |
| 00:10.42 | cr2 | but the charging curetn can, and will behave exponentially |
| 00:11.17 | cr2 | you should get some chainsaw curve for t vs I |
| 00:11.30 | cr2 | does powermon report I ? |
| 00:11.36 | maejrep | what's powermon? |
| 00:11.42 | cr2 | haret command |
| 00:12.00 | cr2 | powermon <time in seconds> |
| 00:12.13 | maejrep | ah |
| 00:12.18 | maejrep | haven't checked |
| 00:12.28 | cr2 | reports V,I,Tbatt |
| 00:12.40 | cr2 | and some other values |
| 00:12.42 | maejrep | Tbatt=temp ? |
| 00:12.48 | cr2 | but sometimes just dummies. |
| 00:12.59 | cr2 | battery temperature |
| 00:13.20 | cr2 | works for ds* chips |
| 00:13.33 | cr2 | but msm pmic may be different. who knows. |
| 00:14.02 | maejrep | the other thing is the raph800 battery.dll does some kind of calculation with the value at SMEM+0xfc0e0, which is always 1250 |
| 00:14.28 | maejrep | actually, that's not right |
| 00:14.40 | cr2 | what does wiki say about e0 ? |
| 00:14.42 | maejrep | +0xfc0e0: 000004e2 |
| 00:14.46 | maejrep | nothing |
| 00:15.00 | maejrep | yeah, 0x4e2 is 1250 |
| 00:15.09 | cr2 | +0xfc0e0 VREF |
| 00:15.14 | maejrep | battery.dll does: |
| 00:15.15 | maejrep | voltage = fc0e0 / (values_32[2] * 1250) |
| 00:15.16 | maejrep | temperature = fc0e0 / (values_32[1] * 1250) |
| 00:15.16 | maejrep | charge = fc0e0 / (values_32[3] * 1250) |
| 00:15.21 | cr2 | +0xfc0e4 1/2 VREF |
| 00:15.36 | maejrep | which is dumb, because fc0e0 is always 1250, so you get 1/<value> |
| 00:15.40 | cr2 | does the e4 value=e0/2 ? |
| 00:15.54 | maejrep | don't have an easy way to check while i'm booted |
| 00:16.05 | maejrep | unless you know a quick way from linux? :p |
| 00:16.13 | cr2 | devmem2 |
| 00:16.35 | maejrep | I have kmem and pmem |
| 00:16.38 | maejrep | no mem2 |
| 00:16.38 | cr2 | is it in the initrd ? |
| 00:16.49 | cr2 | it's a command |
| 00:16.56 | cr2 | type 'devmem2' |
| 00:16.57 | maejrep | then no |
| 00:17.00 | maejrep | not found |
| 00:17.38 | cr2 | ok, then dd from /dev/mem is the only option :) |
| 00:17.48 | maejrep | hmm, batt_current keeps dropping now |
| 00:17.58 | cr2 | or od/hexdump with skip |
| 00:18.12 | cr2 | are the changing gpios enabled ? |
| 00:18.26 | maejrep | changing gpios? via debugfs? |
| 00:18.40 | cr2 | s/chang/charg/ |
| 00:18.45 | maejrep | oh, yeah |
| 00:18.50 | cr2 | ok |
| 00:19.04 | maejrep | root@htcraphael:~# cat /sys/devices/platform/htc_battery/power_supply\:battery/charging_enabled |
| 00:19.04 | maejrep | 1 |
| 00:19.04 | maejrep | root@htcraphael:~# cat /sys/devices/platform/htc_battery/power_supply\:battery/charging_source |
| 00:19.04 | maejrep | 1 |
| 00:19.27 | cr2 | source is current selector ? |
| 00:19.56 | maejrep | typedef enum { |
| 00:19.56 | maejrep | <PROTECTED> |
| 00:19.56 | maejrep | <PROTECTED> |
| 00:19.56 | maejrep | <PROTECTED> |
| 00:19.56 | maejrep | } charger_type_t; |
| 00:20.11 | cr2 | ok |
| 00:20.38 | cr2 | usb may be not enough to charge |
| 00:20.40 | maejrep | [ 31.828824] [BATT] e01fc140: 00000202 00000d3b 00000cce 00000698 0000000d |
| 00:20.41 | maejrep | [ 31.844907] [BATT] v = 3219<6>[BATT] capacity = 100 |
| 00:20.41 | maejrep | [ 31.853085] [BATT] cable USB |
| 00:20.41 | maejrep | [ 31.861112] [BATT] charger ON (SLOW) |
| 00:20.50 | cr2 | at least it did not work on universal. |
| 00:20.56 | maejrep | odd |
| 00:21.10 | maejrep | I'll try haret powermon see if I can make some sense of it |
| 00:21.19 | cr2 | ok |
| 00:21.45 | cr2 | my battery is full charged, so it's not helpful if i'll do it. |
| 00:21.49 | maejrep | sucks cause I know the answer is right there in battery.dll, but I just can't make sense of it :p |
| 00:22.04 | cr2 | but i can save the discharge curve |
| 00:22.48 | maejrep | mine's fully charged too, accoring to wince |
| 00:22.59 | maejrep | but i think it only does like 10% increments anyway |
| 00:23.41 | cr2 | enabling phone/wifi/bt/gps and backlight will discharge very fast :) |
| 00:23.47 | maejrep | :P |
| 00:24.14 | maejrep | gps too |
| 00:24.16 | maejrep | oh |
| 00:24.17 | maejrep | you said that |
| 00:25.08 | maejrep | yeah these values don't make any sense to me :p |
| 00:27.46 | cr2 | powermon ? |
| 00:28.21 | maejrep | yeah |
| 00:28.26 | maejrep | I don't know what the columns are |
| 00:29.22 | maejrep | only 3 of the numbers regularly change, and right now I have charging via usb disabled |
| 00:29.44 | maejrep | so I would expect the percent to start dropping eventually (100% still currently) |
| 00:30.12 | cr2 | cur_time - start_time, // |
| 00:30.26 | cr2 | <PROTECTED> |
| 00:30.27 | cr2 | <PROTECTED> |
| 00:30.29 | cr2 | <PROTECTED> |
| 00:30.30 | cr2 | <PROTECTED> |
| 00:30.32 | cr2 | <PROTECTED> |
| 00:30.33 | cr2 | <PROTECTED> |
| 00:30.35 | cr2 | <PROTECTED> |
| 00:30.36 | cr2 | the rest is not so interesting |
| 00:30.57 | maejrep | hmm, ok, AverageCurrent is always 0 for me |
| 00:31.11 | cr2 | ok |
| 00:31.15 | cr2 | current ? |
| 00:31.29 | maejrep | Voltage is around ~4000, Current goes between 250-750 |
| 00:31.43 | maejrep | Temperature is between 3100-3200 |
| 00:31.48 | cr2 | li-ion is 4.2V max |
| 00:32.05 | cr2 | decicelsius :) |
| 00:32.22 | maejrep | nods |
| 00:32.34 | cr2 | 31-32C |
| 00:32.35 | maejrep | 31.0-32.0 C, right |
| 00:32.36 | cr2 | it's ok |
| 00:32.50 | cr2 | universal could be 45-50 ;) |
| 00:32.58 | cr2 | or even higher |
| 00:33.11 | cr2 | with 825mA charging current |
| 00:33.39 | cr2 | my raph100 becomes very hot when i run inux |
| 00:34.21 | maejrep | batt id (fc140[0]) = 514, [1] = 3387, [2] = 3278, [3] = 1688, [4] = 13 |
| 00:35.01 | maejrep | (bat ID, temperature, voltage, charge, discharge) |
| 00:35.12 | cr2 | <PROTECTED> |
| 00:35.14 | cr2 | +0xfc114 2bbatt Voltage |
| 00:35.16 | cr2 | +0xfc116 2bbatt Charge |
| 00:35.17 | cr2 | +0xfc118 2bbatt Discharge |
| 00:35.18 | cr2 | yes |
| 00:35.58 | maejrep | so, temp = 33.87C, voltage = 3278mV (3.278V), charge = ??, discharge = 13 ? |
| 00:35.59 | cr2 | voltage is a bit low |
| 00:36.05 | maejrep | charge and discharge are in C? |
| 00:36.08 | maejrep | (coulomb) |
| 00:36.20 | cr2 | what is you battery capacity ? |
| 00:36.34 | cr2 | don't know the units. |
| 00:36.51 | maejrep | 3.7VDC |
| 00:37.02 | maejrep | 1340mAh |
| 00:37.19 | cr2 | ok, so 1688 is a bit too high |
| 00:37.46 | maejrep | just means it's not in mAh |
| 00:38.09 | cr2 | mine has the same ratings |
| 00:38.12 | maejrep | which is annoying |
| 00:38.26 | cr2 | ok, so 3.28V is ok |
| 00:38.36 | maejrep | why couldn't they just make +0xfc140 = 0->100% and make everyone's life easy :p |
| 00:38.55 | cr2 | what is 1 Ah |
| 00:39.23 | maejrep | so I understand this, 3.2V out of a 3.7V battery is 3.2/3.7 % charge? or is that wrong |
| 00:39.38 | cr2 | it#s wrong |
| 00:39.46 | maejrep | 1Ah? 1 amp-hour ? |
| 00:39.54 | cr2 | voltage does not play a direct role here. |
| 00:39.59 | maejrep | ok |
| 00:40.51 | maejrep | 000003: 1 100 % 4035 75 0 3146 0 0 -1 -1 0 255 255 0 -1 -1 0 0 0 4 |
| 00:40.51 | maejrep | 001006: 1 90 % 4039 75 0 3147 0 0 -1 -1 0 255 255 0 -1 -1 0 0 0 4 |
| 00:40.57 | maejrep | it actually dropped 10% :p |
| 00:41.08 | cr2 | Ampere-hour = A * hr = (C/s) * hr = (C/s) * 3600s = 3600C. |
| 00:41.23 | cr2 | so 1mAh=3.6C |
| 00:41.58 | cr2 | so it's not the 1.6/1.3 factor |
| 00:42.50 | cr2 | i don't know how wince calculates the percentage |
| 00:44.08 | maejrep | makes no sense :x |
| 00:44.23 | cr2 | 75 mA not much |
| 00:44.38 | cr2 | can you measure with AC on ? |
| 00:45.05 | maejrep | would have to setup wifi, but yeah |
| 00:45.33 | maejrep | btw, fc0e4 = 0x26d, which is close, but not quite 1/2 fc0e0 |
| 00:45.54 | maejrep | fc0e0=1250, fc0e4= 1242/2 |
| 00:46.50 | *** join/#htc-linux AstainHellbring (n=AstainHe@unaffiliated/astainhellbring) |
| 00:47.16 | cr2 | ok |
| 00:47.31 | AstainHellbring | hi |
| 00:47.33 | AstainHellbring | how goes it cr2? |
| 00:47.45 | cr2 | AstainHellbring: slowly |
| 00:48.01 | AstainHellbring | cr2 whatcha working on? |
| 00:48.16 | cr2 | many things |
| 00:48.44 | maejrep | cr2: gps changes current from 75 to 638 :p |
| 00:48.55 | AstainHellbring | maejrep! hi |
| 00:49.03 | maejrep | howdy |
| 00:49.14 | AstainHellbring | how goes it? |
| 00:49.27 | maejrep | good |
| 00:49.37 | cr2 | maejrep: lol |
| 00:49.45 | maejrep | cr2: i see absolutely no correlation between % and the numbers powermon displays :/ |
| 00:49.53 | cr2 | maejrep: i can post my 'git diff' |
| 00:49.59 | maejrep | and we can't pdump the smem battery data, because wince does 0x8a and 0x8b at the same time |
| 00:50.08 | cr2 | maejrep: yes, it's some integral parameter |
| 00:50.10 | maejrep | cr2: which does waht? |
| 00:50.29 | maejrep | i mean, what patches do you want to make? |
| 00:50.31 | cr2 | maejrep: many minor things |
| 00:50.47 | cr2 | serial and nand |
| 00:50.53 | maejrep | nice |
| 00:51.04 | cr2 | but they are not 100% functional |
| 00:51.16 | cr2 | but still some progress ;) |
| 00:51.27 | maejrep | btw, my htc_hw (based on vogue-hw driver) also exposes CDMA vs GSM to userland |
| 00:51.38 | maejrep | which will be useful for pppd in the initrd |
| 00:51.42 | cr2 | so other people don't do stupid mistakes. |
| 00:51.58 | cr2 | ok |
| 00:54.14 | cr2 | maejrep: https://privatepaste.com/e90ilGj4Jk |
| 00:54.46 | cr2 | btw, i don't know if it's a good idea to have the MD/NS params for SD and uartDM in one table. |
| 00:54.56 | maejrep | ah I have a patch to remove those platform_device's too :p haven't committed though |
| 00:55.42 | cr2 | +//{ .clk_id = UART1_CLK, .offset = 0xc0, .ns_only = 0xa00, .name="UART1_CLK"}, |
| 00:55.54 | maejrep | +static struct msm_serial_hs_platform_data msm_uart_dm2_pdata = { <-- is this the same for 100 and 800? |
| 00:55.56 | cr2 | this line makes my raph very unhappy |
| 00:56.26 | cr2 | i think yes. but i don't have the 800 rom dump. |
| 00:56.32 | cr2 | hmm. must be in the spl too |
| 00:56.50 | cr2 | no, you dontuse fm. |
| 00:56.50 | AstainHellbring | I can get you a rom dump if you want one cr2 or any files you many need as well |
| 00:57.17 | maejrep | is fm over uart_dm2? |
| 00:57.30 | cr2 | on raph100, yes |
| 00:57.42 | cr2 | the fm control, not the pcm |
| 00:57.53 | cr2 | i think |
| 00:58.46 | maejrep | <cr2> stat2.ACLineStatus, // 0x00 <-- this changes to 1 when I enable charging by USB, so it's not only AC |
| 00:59.04 | maejrep | might change to 2 when AC is connected |
| 00:59.07 | cr2 | +printk("nand tag: n=%d name=%s offset=0x%x size=0x%x flags=0x%x\n",n,ptn->name,ptn->offset,ptn->size, entry->flags); |
| 00:59.36 | cr2 | this line produces dummy output for me. but the final result is ok. strange |
| 00:59.58 | cr2 | maejrep: yes. |
| 01:01.51 | cr2 | xdr_call_msg_start |
| 01:02.16 | maejrep | rpc? |
| 01:03.15 | cr2 | yes. 4 parameters |
| 01:03.30 | cr2 | ptr, prog,vers,param ? |
| 01:04.05 | cr2 | ptr, 0x3000005b,0,0xc |
| 01:04.41 | cr2 | this is pdsm_get_position |
| 01:04.56 | maejrep | what is pdsm |
| 01:05.05 | cr2 | at first it calls rpc_clnt_lookup2 |
| 01:05.13 | maejrep | cr2: know how to resolve a conflict during merge? |
| 01:05.28 | maejrep | svn is so easy... "svn resolved <file>" |
| 01:05.52 | cr2 | (0x3000003b,0,-1) |
| 01:06.17 | cr2 | hehe, git is a maze. when i have such problem, i edit manully until it's happy ;) |
| 01:06.44 | maejrep | the conflict is resolved, but git still says I'm in the middle of a merge conflict |
| 01:10.17 | dcordes | I had a conflict in htc-vogue and only solved it by cloning freshly |
| 01:10.41 | maejrep | cr2: what revision is that patch against? |
| 01:11.27 | maejrep | oh |
| 01:11.29 | maejrep | nevermind |
| 01:15.04 | maejrep | cr2: uint32_t nsreg; |
| 01:15.08 | maejrep | defined but not used |
| 01:15.12 | maejrep | did you have something in mind for it |
| 01:15.59 | maejrep | oh, it's #if 0 |
| 01:16.26 | maejrep | I tried it that way too, and it didn't work well for me |
| 01:17.00 | cr2 | i need to find out why enabling uart_clk leads to a crash. |
| 01:17.13 | cr2 | ok, it's too late now. good night |
| 01:17.18 | maejrep | gnite |
| 01:20.28 | AstainHellbring | maejrep any work been done to get audio/calling working? |
| 01:20.37 | maejrep | not sure |
| 01:20.48 | maejrep | untouchable mentioned that there was a forum where people were talking about rpc & audio |
| 01:20.53 | maejrep | haven't looked into it |
| 01:20.58 | AstainHellbring | ok cool |
| 01:42.22 | maejrep | hmm, can't git-push for some reason |
| 01:42.34 | maejrep | ltg must be having problems |
| 01:44.03 | *** join/#htc-linux madCoder- (n=madcoder@c-71-225-238-170.hsd1.pa.comcast.net) |
| 01:45.49 | maejrep | warning: that commit (battery/charger) is not tested on raph100, and is not 100% complete even for raph800 |
| 01:46.03 | maejrep | but committing it so others can mess with it |
| 02:06.49 | AstainHellbring | interesting |
| 02:56.47 | *** join/#htc-linux TheiPirate (n=Timbo@cpe-67-9-132-146.austin.res.rr.com) |
| 03:06.14 | *** join/#htc-linux mrmoku|away (n=mrmoku@ppp-93-104-41-121.dynamic.mnet-online.de) |
| 03:51.04 | *** join/#htc-linux Tinyboom (n=nahh@206.84-49-89.nextgentel.com) |
| 04:48.40 | *** join/#htc-linux Moku (n=John@f049137152.adsl.alicedsl.de) |
| 06:15.59 | *** join/#htc-linux Patrick_Bateman (n=swc@unaffiliated/swc666/x-4934821) |
| 06:19.04 | *** join/#htc-linux pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 06:44.23 | *** join/#htc-linux nebi_ (n=nebi@217.142.147.19) |
| 06:57.42 | *** join/#htc-linux goxboxlive (n=goxboxli@204.84-48-126.nextgentel.com) |
| 07:12.32 | *** join/#htc-linux exception13 (n=exceptio@testdrive.kgts.ru) |
| 07:14.37 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d874030.pool.einsundeins.de) |
| 07:32.33 | *** join/#htc-linux pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 07:40.00 | *** join/#htc-linux BabelO (n=fcr@unaffiliated/babelo) |
| 07:44.48 | *** join/#htc-linux mib_sdh6hzc6 (i=60f71ca0@gateway/web/ajax/mibbit.com/x-d76604262c509aa6) |
| 07:45.18 | *** part/#htc-linux mib_sdh6hzc6 (i=60f71ca0@gateway/web/ajax/mibbit.com/x-d76604262c509aa6) |
| 08:00.26 | *** join/#htc-linux DJW|Home (i=djwillis@82-46-19-72.cable.ubr02.bath.blueyonder.co.uk) |
| 08:31.04 | *** join/#htc-linux swc|666 (n=swc@unaffiliated/swc666/x-4934821) |
| 08:34.52 | *** part/#htc-linux exception13 (n=exceptio@testdrive.kgts.ru) |
| 10:02.57 | *** join/#htc-linux diogene31 (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
| 10:15.44 | *** join/#htc-linux hollo (n=hollo@3e6b7b2c.rev.stofanet.dk) |
| 10:28.21 | *** join/#htc-linux captnoord (i=5147a47b@gateway/web/ajax/mibbit.com/x-9e9be7e771dce9a0) |
| 10:30.19 | *** join/#htc-linux captnoord (i=5147a47b@gateway/web/ajax/mibbit.com/x-95af0f20d8ac17f2) |
| 10:51.57 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d874030.pool.einsundeins.de) |
| 11:02.19 | *** join/#htc-linux MethoS (n=clemens@dyndsl-085-016-166-165.ewe-ip-backbone.de) |
| 11:05.35 | *** join/#htc-linux zycho (n=zycho@dslb-088-070-052-125.pools.arcor-ip.net) |
| 11:07.13 | *** join/#htc-linux StarLite (n=nnscript@s55916ca6.adsl.wanadoo.nl) |
| 11:14.31 | *** join/#htc-linux Jacmet (i=peko@stolen.plutonium.dk) |
| 11:16.52 | Jacmet | is Haret supposed to run on wince 6.0 machines (s3c6410)? I get 'Haret is not running in system mode' at startup? |
| 11:18.06 | Marajin | it's supposed to run on WM6 |
| 11:18.15 | Marajin | Win CE 6 is a different thing AFAIK ? |
| 11:19.16 | Marajin | Jacmet: I think you can only run it on Windows Mobile OS? |
| 11:19.52 | captnoord | itsn't it the same? |
| 11:19.53 | captnoord | :P |
| 11:20.06 | Marajin | captnoord: nope |
| 11:20.12 | captnoord | k |
| 11:20.22 | Marajin | captnoord: Windows CE is embedded windows, it still looks like a Win 2000 desktop IIRC |
| 11:20.42 | captnoord | k |
| 11:20.45 | captnoord | I see..... |
| 11:21.04 | captnoord | maybe if harret is compiled targetting wince |
| 11:40.59 | *** join/#htc-linux Marex (n=vasum7am@u-pl15.ms.mff.cuni.cz) |
| 11:41.10 | *** join/#htc-linux cr2 (n=cr2@90.187.72.136) |
| 11:41.39 | cr2 | hi |
| 11:42.16 | cr2 | Jacmet: not running in the system mode is not a problem. actually it should always be the case ;) |
| 11:43.21 | cr2 | Jacmet: but not being able to switch into system mode is a problem. which usually appears only on the "smartphones", where you need to deal with certificates, or disable the cert check |
| 11:45.55 | *** join/#htc-linux timebomb (n=tb@d027222.adsl.hansenet.de) |
| 11:52.39 | Jacmet | cr2: ok, this isn't a phone |
| 11:52.58 | Jacmet | cr2: .. and how do you disable that check? |
| 11:53.52 | Jacmet | cr2: I'm not really familiar with wince (only used it for a few days before installing Linux on my old hp3600 - that must have been 10y ago) |
| 11:56.09 | Jacmet | from haretlog.txt: |
| 11:56.11 | Jacmet | Haret is not running in 'system' mode. Major functionality will not be present. |
| 11:56.14 | Jacmet | Exception on cpu id detect |
| 11:56.17 | Jacmet | Welcome, this is HaRET 0.5.2 running on WindowsCE v6.0 |
| 11:56.19 | Jacmet | Minimal virtual address: 00010000, maximal virtual address: 7FFFFFFF |
| 11:56.22 | Jacmet | Detected machine Default/generic (Plat='SMDK6410' OEM='Microsoft DeviceEmulator' |
| 12:06.36 | cr2 | Jacmet: OEM='Microsoft DeviceEmulator' ? |
| 12:06.58 | cr2 | Jacmet: is it's not a real hardware device, what is the purpose of running haret ? |
| 12:09.16 | cr2 | Jacmet: even if this is real hw, this cpu needs some haret support code, too. |
| 12:13.14 | *** join/#htc-linux timebomb (n=tb@c169207.adsl.hansenet.de) |
| 12:16.49 | Jacmet | cr2: it is real hw, a S3C6410 |
| 12:17.07 | Jacmet | cr2: even for the most basic jump-to-linux-kernel stuff? |
| 12:17.52 | Jacmet | cr2: fairly early hw/sw, so that probably explains the OEM screwup |
| 12:22.15 | cr2 | Jacmet: is the cpu manual available ? |
| 12:22.39 | cr2 | Jacmet: there are some basic thing that need to be implemented. check the s3c2442 support. |
| 12:23.21 | Jacmet | cr2: more-or-less, the s3c6400 manual is available and they are the same except for a few extra peripherals in 6410 |
| 12:24.12 | *** join/#htc-linux StarLite (n=nnscript@s55916ca6.adsl.wanadoo.nl) |
| 12:24.14 | Jacmet | cr2: see http://kerneltrap.org/mailarchive/openmoko-kernel/2008/10/13/3631124/thread |
| 12:25.36 | Jacmet | cr2: ahh, it seems Harald Welte did some work on it already: http://gnufiish.org/trac/attachment/wiki/DX900/haret-s3c64xx-dx900.patch |
| 12:26.32 | cr2 | Jacmet: we should inform Kevin2 |
| 12:27.01 | *** join/#htc-linux nebi_ (n=nebi@217.142.147.19) |
| 12:30.21 | cr2 | looks good. the .vcp can be avoided though. |
| 12:39.13 | Jacmet | cr2: ok, I'll check with Harald if that's the most recent patch of his and ask him to post it to the list / post myself |
| 12:42.33 | cr2 | ok |
| 13:20.21 | *** join/#htc-linux swc|666 (n=swc@unaffiliated/swc666/x-4934821) |
| 13:37.37 | *** join/#htc-linux MethoS- (n=clemens@host-091-097-245-103.ewe-ip-backbone.de) |
| 14:06.30 | *** join/#htc-linux Othello (i=Othello@gateway/tor/x-a6caf0081f2d093d) |
| 14:18.55 | AstainZZZZZZ | morning |
| 14:29.25 | Marajin | mornin' AstainHellbring |
| 14:30.15 | AstainHellbring | how we doing? |
| 14:30.48 | *** join/#htc-linux nebi_ (n=nebi@217.142.147.19) |
| 14:35.46 | Marajin | we's doing juuuust fine |
| 14:47.35 | *** join/#htc-linux Othello (i=Othello@gateway/tor/x-76d111f97b064ce6) |
| 15:25.59 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d874030.pool.einsundeins.de) |
| 15:36.32 | *** join/#htc-linux timebomb (n=tb@c169207.adsl.hansenet.de) |
| 15:36.49 | *** join/#htc-linux captnoord (i=5147a47b@gateway/web/ajax/mibbit.com/x-be0c270f92e27366) |
| 16:20.40 | cr2 | maejrep: is it possible to add the tiacx to git ? |
| 16:42.42 | *** join/#htc-linux timebomb (n=tb@c169207.adsl.hansenet.de) |
| 16:58.42 | *** join/#htc-linux cr2 (n=cr2@ip-90-187-72-136.web.vodafone.de) |
| 17:02.11 | *** join/#htc-linux puregenius (n=chatzill@cpe-173-89-5-78.wi.res.rr.com) |
| 17:06.38 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 17:37.27 | *** join/#htc-linux Magorium (i=Othello@gateway/tor/x-7143876cb7748301) |
| 17:42.40 | *** join/#htc-linux pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 17:48.34 | *** join/#htc-linux tipocomico (n=rui@bl8-48-158.dsl.telepac.pt) |
| 19:11.20 | *** join/#htc-linux thinko (n=jdoe6alp@smaug.rackdragon.com) |
| 19:17.01 | cr2 | http://www.gns-gmbh.com/index.php?id=103&L=1 |
| 20:09.27 | *** join/#htc-linux stefan_schmidt (n=stefan@p5B03573A.dip.t-dialin.net) |
| 20:13.17 | *** join/#htc-linux pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 20:13.36 | Jacmet | cr2: looked a bit more into it, it seems like the trusted stuff is enabled so all apps run in usermode (PSR=0x10) :/ |
| 20:17.24 | cr2 | is the registry editable ? |
| 20:18.02 | Jacmet | cr2: well, I tried a bunch of registry editors, and none of them seems to want to start |
| 20:18.15 | cr2 | ok |
| 20:18.36 | Jacmet | cr2: I don't know if that's normal behaviour if the registry isn't editable |
| 20:19.18 | cr2 | is it possible to dump the nand, or where is the wince located |
| 20:20.34 | cr2 | you may try the usual smartphone tools, but if it fails then jtag is the only answer ;) |
| 20:20.41 | Jacmet | cr2: well, I've just got the hw yesterday, but I'll solder the serial on and check what I the bootloader offers |
| 20:20.50 | cr2 | ok |
| 20:21.12 | Jacmet | cr2: jtag isn't a big problem, except that I don't have ARM11 firmware for my bdi probe :/ |
| 20:21.57 | cr2 | good luck :) |
| 20:22.12 | Jacmet | cr2: could you give me some pointers to those smartphone tools? I'm not familiar with wince stuff |
| 20:23.00 | Jacmet | .. and thanks ;) |
| 20:23.37 | cr2 | looking for it |
| 20:24.19 | cr2 | sometimes it's possible to install the user cert, sign haret and us it. |
| 20:25.10 | Jacmet | ahh ok |
| 20:26.17 | Jacmet | cr2: there's control panel->certificates which has an import button, is that it? |
| 20:27.02 | cr2 | probably |
| 20:27.43 | cr2 | http://msdn.microsoft.com/en-us/library/ms839681.aspx |
| 20:30.20 | *** join/#htc-linux puregenius (n=chatzill@cpe-173-89-5-78.wi.res.rr.com) |
| 20:30.24 | Jacmet | cr2: can I sign haret on linux or do I need to find a windows machine for that? |
| 20:31.09 | cr2 | hmm. |
| 20:31.25 | cr2 | i think it will work with wine |
| 20:31.38 | cr2 | don't know how to do it without windows |
| 20:32.07 | cr2 | would be nice to do it though. |
| 20:38.16 | cr2 | here at the bottom: -> http://www.xs4all.nl/~itsme/projects/xda/tools.html |
| 20:38.32 | *** join/#htc-linux jorn (n=goxboxli@204.84-48-126.nextgentel.com) |
| 20:40.54 | cr2 | not bad. i've missed the newest version |
| 20:40.58 | cr2 | 090331 |
| 20:41.00 | cr2 | major new features: |
| 20:41.01 | cr2 | <PROTECTED> |
| 20:41.43 | jorn | hi cr2 , what gps app is useable when running linux. (driving) |
| 20:41.50 | jorn | it's me goxboxlive |
| 20:42.18 | jorn | i tested gpsdrive, but it didnt work that well. |
| 20:43.05 | jorn | i have also tried out tango gps. |
| 20:44.44 | cr2 | roadmap ? navipowm ? navit ? |
| 20:46.34 | jorn | ok,, i'll check them out |
| 20:46.36 | jorn | thx |
| 20:49.12 | cr2 | dream_kill: http://nah6.com/~itsme/cvs-xdadevtools/itsutils/dll/FlashDrvReader.cpp |
| 20:52.27 | cr2 | lol. nand mpu. |
| 20:53.44 | cr2 | really smart indeed. |
| 20:58.34 | *** join/#htc-linux sabayonweb_45849 (i=44984006@gateway/web/ajax/mibbit.com/x-97e8bdca813a2c03) |
| 20:59.10 | sabayonweb_45849 | hey can someone help me get signed on to google account with android on htc kaiser with tmobile |
| 20:59.54 | sabayonweb_45849 | it will boot but not make calls or get google to connect |
| 21:02.54 | *** join/#htc-linux terr1 (n=Terr1@port209.ds1-hs.adsl.cybercity.dk) |
| 21:11.18 | sabayonweb_45849 | anyone here |
| 21:23.11 | *** join/#htc-linux exception13 (n=exceptio@testdrive.kgts.ru) |
| 21:28.20 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d874030.pool.einsundeins.de) |
| 21:33.26 | jorn | nope |
| 21:37.57 | jorn | osm is not well covered up here in norway |
| 21:38.10 | jorn | only the main streets, not small streets |
| 21:49.51 | *** part/#htc-linux exception13 (n=exceptio@testdrive.kgts.ru) |
| 21:52.56 | *** join/#htc-linux BHSPitLappy (n=BHSPitLa@unaffiliated/bhspitmonkey) |
| 22:14.34 | jorn | cr2, have you ever managed to start navit |
| 22:14.37 | jorn | ? |
| 22:16.15 | *** join/#htc-linux swc|666 (n=swc@unaffiliated/swc666/x-4934821) |
| 22:46.26 | *** join/#htc-linux MethoS (n=clemens@host-091-097-245-019.ewe-ip-backbone.de) |
| 23:07.03 | *** join/#htc-linux descenti1n (n=Descenti@acm.pct.edu) |
| 23:18.31 | j0b0 | ltg head htc-msm-2.6.27 doesnt build for me. i get link errors from htc_battery.c for some msm_rpc_stuff |
| 23:19.50 | *** join/#htc-linux Tinyboom (n=nahh@206.84-49-89.nextgentel.com) |
| 23:23.48 | j0b0 | probably not added to a makefile or kconfig. will loot at it after i sleep |
| 23:24.21 | j0b0 | and look as well |
| 23:27.49 | cr2 | j0b0: hmm. i have not tried to compile yet |
| 23:30.20 | j0b0 | cr2: :) yours didnt break it. it was maejreps |
| 23:40.58 | cr2 | well, i've tested that my patch works :) |
| 23:41.37 | swc|666 | ._. |
| 23:41.45 | cr2 | but we need rpc too. i think. |
| 23:42.07 | swc|666 | rpc is for hd tho right? |
| 23:42.19 | cr2 | but looking at the rpc code, i think we are doing a lot of such things without rpc already. |
| 23:42.22 | swc|666 | for audio? |
| 23:42.36 | cr2 | yes, mostly adsp |
| 23:42.44 | cr2 | maybe gps. |
| 23:42.52 | swc|666 | hmm |
| 23:43.38 | cr2 | gps uses soe rpc calls, but maybe it's really important only if you use AGPS |
| 23:44.35 | swc|666 | aha |
| 23:44.45 | cr2 | j0b0: i have another idea though. is there any evidence that DATA1 is used for umts ? |
| 23:44.57 | swc|666 | the whole msm* boggles me |
| 23:45.27 | cr2 | maybe i'd take out the sim card from nc10 to raph, and check it tomorrow. |
| 23:46.26 | cr2 | swc|666: yeah, the cpu is bizarrely complicated, and without the docs ;) but it seems an only option these days. |
| 23:46.44 | swc|666 | yep :s |
| 23:53.23 | cr2 | strongarm/pxa. that were excellently documented and more or less sanely designed cpus |
| 23:54.57 | cr2 | s3c24xx, omap and msm. hmm. the first one is documented, but it still can't be compared with pxa. |
| 23:57.12 | cr2 | omap and msm look more like dsps, than real general purpose cpus. |