| 00:00.09 | maejrep | Venny: it is only one OS: linux |
| 00:00.09 | maejrep | android is built *on top of* the linux OS |
| 00:00.23 | maejrep | before android can work, linux must work first |
| 00:00.57 | Venny | Wow i feel like a idiot... i knew that and i just didnt think... |
| 00:03.13 | maejrep | ;] |
| 00:03.45 | maejrep | on the bright side, if this works out well, we might actually expect to be usable graphics & colors in android ;) |
| 00:04.36 | Marajin | yo |
| 00:07.40 | Venny | Thats amazing maejrep :D |
| 00:08.26 | Venny | maejrep, would there be a possibility for a OS like Ubuntu linux on the TP? |
| 00:08.43 | *** join/#htc-linux konsta (n=asds@host81-157-60-163.range81-157.btcentralplus.com) |
| 00:08.49 | maejrep | it's possible |
| 00:09.02 | maejrep | but it's not really intended for an embedded system |
| 00:09.07 | maejrep | (ubuntu isn't) |
| 00:09.38 | maejrep | but as long as linux supports it, it doesn't matter what distribution you use with it |
| 00:09.59 | Venny | :) |
| 00:12.05 | *** join/#htc-linux hollo (n=hollo@3e6b025d.rev.stofanet.dk) |
| 00:12.10 | hollo | hej i skuret |
| 00:19.21 | *** join/#htc-linux woodyPL_ (i=woody@gateway/shell/blinkenshell.org/x-ba71c7c4f0d53296) |
| 00:19.43 | *** join/#htc-linux krisje8 (i=krisje8@gateway/shell/blinkenshell.org/x-808eaf69e123f05b) |
| 00:21.49 | balsat | Hollo: Hvis du skriver på engelsk får du mere respons |
| 00:24.28 | hollo | balsat, det var den forkerte channel.. sorry :) |
| 00:24.30 | Stskeeps | still, 3 danes in the same channel (at least..) |
| 00:24.31 | Stskeeps | :P |
| 00:25.05 | hollo | sorry.. it was the wrong channel even... .. |
| 00:31.12 | *** join/#htc-linux dream_kill (n=nospam@92.56.48.66) |
| 00:37.36 | balsat | netripper: My pppd output http://pastebin.com/m7d4f774f |
| 00:38.40 | NetRipper | balsat, same problem as me |
| 00:38.57 | balsat | Yep... no ppp0 |
| 00:39.05 | NetRipper | try adding noccp nopcomp noaccomp |
| 00:39.34 | NetRipper | and your apn is "internet" as well? |
| 00:39.53 | balsat | yes it is |
| 00:40.22 | NetRipper | ok |
| 00:47.59 | *** join/#htc-linux beefviper (n=beef@unaffiliated/beef) |
| 00:50.37 | *** join/#htc-linux Untouchab1e (n=Untoucha@cm-84.209.89.86.getinternet.no) |
| 00:50.42 | Untouchab1e | Good evening |
| 01:03.22 | maejrep | tries new lcd init code |
| 01:04.06 | maejrep | well, it works :) about as well as I could hope for anyway |
| 01:04.51 | maejrep | it's offset by about 25% to the left though (left edge appears at about 75% across, and the right edge is there as well |
| 01:05.05 | balsat | <NetRipper> and your apn is "internet" as well? |
| 01:05.45 | balsat | No is data.tre.dk but same result |
| 01:18.49 | balsat | rcvd [IPCP ConfNak id=0x3 <addr 10.177.196.175> <ms-dns1 80.251.192.244> <ms-dns3 80.251.192.245>] Is the IP of my phone provider, so at least that is a god sign |
| 02:09.24 | *** join/#htc-linux tmzt__ (n=tmzt@adsl-99-164-41-91.dsl.akrnoh.sbcglobal.net) |
| 02:20.25 | *** part/#htc-linux p3t3r__ (n=peter@wlan.net-you.de) |
| 02:33.41 | *** join/#htc-linux br1ck_ (n=br1ck@xdsldf022.osnanet.de) |
| 02:40.53 | *** join/#htc-linux j0b0 (n=jobo@12.35.60.99) |
| 02:50.58 | maejrep | cr2: what is mddi_write with r2=1 supposed to mean? :/ |
| 03:03.28 | *** join/#htc-linux swc|666 (n=carramro@unaffiliated/swc666/x-4934821) |
| 03:14.28 | maejrep | it looks like the only difference is when that r2 != 0, it calls some rex task functions: |
| 03:14.31 | maejrep | MOV R0, R8 |
| 03:14.31 | maejrep | BL rex_wait |
| 03:14.31 | maejrep | BL rex_self |
| 03:14.31 | maejrep | MOV R1, R8 |
| 03:14.31 | maejrep | BL rex_clr_sigs |
| 03:14.48 | maejrep | but I'm guessing that's not necessary for us? :x |
| 03:23.26 | maejrep | [ 236.854610] fb_helper: invalid position <- this is flooding my dmesg now :( |
| 03:25.01 | maejrep | sweet :D SMD_DS works now (the cat actually updates, as data comes in now) |
| 03:26.10 | *** join/#htc-linux Jos (i=Jos@2a02:348:33:584a:0:0:0:1) |
| 03:28.11 | maejrep | cr2: 2 things .. :/ 1) picture is offset about 20px to the left (so what *should* be the left edge of the screen is showing up on the right side), and 2) color is still messed up; it still needs the RGB444 hack in msm_fb for the penguin to look correct |
| 03:30.50 | maejrep | but otherwise, smd is pretty close to done, lcd is kind of close, still need to give NetRipper my battery/charger patches (not fully working yet), and the clock api changes |
| 03:37.56 | maejrep | I get a +CMT: message on smd0 when receiving a text |
| 04:40.46 | *** join/#htc-linux BHSPitLappy (n=BHSPitLa@unaffiliated/bhspitmonkey) |
| 05:06.55 | *** join/#htc-linux tmzt (n=tmzt@adsl-99-164-41-91.dsl.akrnoh.sbcglobal.net) |
| 05:07.05 | *** join/#htc-linux hechu (n=hechu@59.41.104.219) |
| 05:27.13 | *** join/#htc-linux j0b0 (n=jobo@12.35.60.99) |
| 05:32.39 | *** join/#htc-linux Venny (i=Administ@h216-45-127-2.dynamic.platinum.ca) |
| 06:33.34 | maejrep | NetRipper: i have 1541 lines of patches :p |
| 06:34.31 | maejrep | oh, scratch that, 2535 lines |
| 06:59.19 | descention | do any of the android-on-kaiser builds save settings externally? |
| 07:35.27 | *** join/#htc-linux woodson (n=CDP@c-68-54-66-168.hsd1.fl.comcast.net) |
| 07:55.50 | maejrep | When REG[0104h] bit 5 = 0b, LCD1 is configured for an 18-bit interface and the RGB 6:6:6 data format is used. |
| 07:56.00 | maejrep | hmm, maybe that's why it looks bad :/ |
| 08:01.28 | swc|666 | heh |
| 08:12.59 | *** join/#htc-linux pH5 (n=ph5@e178235223.adsl.alicedsl.de) |
| 08:36.39 | *** join/#htc-linux goxboxlive (n=goxboxli@185.84-48-126.nextgentel.com) |
| 08:37.21 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d87d23a.pool.einsundeins.de) |
| 08:39.40 | swc|666 | maejrep, your doing an excellent job btw ;) |
| 08:41.50 | *** join/#htc-linux woodson_ (n=CDP@c-68-54-66-168.hsd1.fl.comcast.net) |
| 08:42.09 | *** join/#htc-linux liba2k (n=liba2k@194.90.149.193) |
| 08:44.53 | maejrep | doesnt feel like it :/ something broke in the last hour or so, and I have no idea what caused it |
| 08:45.10 | boli^ | pebkac? |
| 08:52.04 | swc|666 | maejrep, sleep! |
| 08:52.19 | swc|666 | rest fixes all |
| 08:52.37 | boli^ | what if maejrep has trouble resuming from sleep mode? |
| 08:52.54 | maejrep | he does |
| 09:08.16 | swc|666 | coffee |
| 09:08.26 | swc|666 | orange juice = even better |
| 09:37.12 | *** join/#htc-linux BabelO (n=fcr@unaffiliated/babelo) |
| 09:37.17 | *** join/#htc-linux pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 09:49.17 | *** join/#htc-linux imfloflo (n=imfloflo@34.158.119-80.rev.gaoland.net) |
| 09:53.37 | *** join/#htc-linux diogene31 (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
| 09:57.56 | *** join/#htc-linux nebi (n=nebi@170.ftth2.cust.fyrobs1.upps.se.borderlight.net) |
| 10:04.36 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbfdf6a.pool.einsundeins.de) |
| 10:39.33 | *** join/#htc-linux Marajin_ (n=marajin@87-194-102-189.bethere.co.uk) |
| 10:47.04 | *** join/#htc-linux wdslbr (n=wdslbr@dslb-088-069-250-031.pools.arcor-ip.net) |
| 10:52.40 | *** join/#htc-linux fnord_ (n=fnord@24-151-90-116.static.nwtn.ct.charter.com) |
| 11:37.53 | *** join/#htc-linux hollo (n=hollo@3e6b025d.rev.stofanet.dk) |
| 11:38.06 | *** join/#htc-linux MethoS- (n=lem@host-091-097-240-187.ewe-ip-backbone.de) |
| 12:14.47 | *** join/#htc-linux marmotta (n=skodde@unaffiliated/skodde) |
| 12:17.40 | *** join/#htc-linux exco_ (n=exco@e181121052.adsl.alicedsl.de) |
| 12:17.46 | exco_ | ~seen rogro |
| 12:17.49 | apt | exco_: i haven't seen 'rogro' |
| 12:19.00 | krisje8 | ~seen apt_ |
| 12:19.01 | apt | krisje8: i haven't seen 'apt_' |
| 12:19.09 | krisje8 | ~seen god |
| 12:19.10 | apt | god is currently on #debian, last said: 'oh i called in sick when huxton was born'. |
| 12:19.16 | *** join/#htc-linux Robwoerle (n=bob@p549BFD31.dip.t-dialin.net) |
| 12:19.37 | exco_ | <PROTECTED> |
| 12:19.38 | apt | rogro82 <n=rogro82@s5591104d.adsl.wanadoo.nl> was last seen on IRC in channel #htc-linux, 20d 21h 29m 44s ago, saying: 'imflofo: now its all in the repo not much time... but i had to make some changes because dzo copied the backlight related stuff but that killed the build ( double declarations )'. |
| 12:20.20 | exco_ | ;-) |
| 12:28.09 | *** part/#htc-linux exco_ (n=exco@e181121052.adsl.alicedsl.de) |
| 12:34.58 | *** join/#htc-linux radem205 (n=aaa@e144118.upc-e.chello.nl) |
| 12:44.04 | *** join/#htc-linux OlofS (n=olof@ryzar.upsys.se) |
| 13:10.36 | *** join/#htc-linux cr2 (n=cr2@ip-77-24-93-96.web.vodafone.de) |
| 13:10.52 | cr2 | hi |
| 13:11.15 | cr2 | maejrep: what happens if you remove the MDP dithering flag ? |
| 13:26.44 | *** join/#htc-linux marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 13:29.45 | *** join/#htc-linux MethoS-- (n=lem@host-091-097-245-241.ewe-ip-backbone.de) |
| 13:46.13 | *** join/#htc-linux woodson (n=CDP@c-68-54-66-168.hsd1.fl.comcast.net) |
| 14:08.51 | *** join/#htc-linux diogene31 (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
| 14:09.14 | *** join/#htc-linux Abracadabr4 (n=aaabraca@unaffiliated/abracadabra) |
| 14:09.15 | *** join/#htc-linux zycho (n=zycho@a89-182-24-52.net-htp.de) |
| 14:15.14 | *** join/#htc-linux PoohbaLT (n=BlkPoohb@c-69-141-71-249.hsd1.nj.comcast.net) |
| 14:36.13 | *** join/#htc-linux Moku (n=John@g227206182.adsl.alicedsl.de) |
| 14:43.27 | *** join/#htc-linux Zoolooc_ (n=fredsiba@nrbg-4dbfe037.pool.einsundeins.de) |
| 14:48.29 | *** join/#htc-linux patp (n=arf@87-194-56-160.bethere.co.uk) |
| 14:51.12 | patp | hi - anyone here able to help me get USB RNDIS working on windows? |
| 14:51.23 | Marajin_ | yo |
| 15:04.46 | patp | !seen orux |
| 15:27.23 | *** join/#htc-linux diogene31 (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
| 15:35.30 | *** join/#htc-linux Venny (n=Administ@h216-45-127-2.dynamic.platinum.ca) |
| 16:01.17 | *** join/#htc-linux ewasx (n=armin@3-157.surfsnel.dsl.internl.net) |
| 16:04.37 | *** join/#htc-linux oliwan (n=ollie@client-86-25-190-92.bsh-bng-012.adsl.virginmedia.net) |
| 16:11.25 | cr2 | NetRipper: have you tried memtest on 2 banks ? http://carpanta.dc.fi.udc.es/~quintela/memtest |
| 16:18.37 | *** join/#htc-linux Ben- (n=10589her@p4FC0D6F2.dip.t-dialin.net) |
| 16:18.40 | Ben- | hi folk |
| 16:32.22 | *** join/#htc-linux p3t3r__ (n=peter@134.245.164.105) |
| 16:57.28 | *** join/#htc-linux dream_kill (n=nospam@92.56.48.66) |
| 16:58.50 | *** join/#htc-linux marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 16:59.05 | *** join/#htc-linux Pure4Real (n=pure4rea@89-97-140-219.ip17.fastwebnet.it) |
| 17:03.06 | *** join/#htc-linux AstainHasPS3 (n=AstainHe@unaffiliated/astainhellbring) |
| 17:04.58 | AstainHasPS3 | morning |
| 17:07.32 | patp | hey - I got Blackstone screen working! |
| 17:07.53 | patp | see here: http://forum.xda-developers.com/showpost.php?p=3363393&postcount=596 |
| 17:08.14 | boli^ | well done |
| 17:08.17 | boli^ | now fix my wifi ;) |
| 17:14.53 | cr2 | patp: what is the init table value for this register ? |
| 17:21.54 | patp | um... I am an amateur, what do you mean? |
| 17:22.04 | patp | in linux, spl, where? |
| 17:31.53 | *** join/#htc-linux c4software (n=c4softwa@roo49-2-88-161-139-221.fbx.proxad.net) |
| 17:31.57 | c4software | Hi |
| 17:32.11 | *** join/#htc-linux pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 17:33.03 | Ben- | [18:06:18] <patp> hey - I got Blackstone screen working! <- great! :) |
| 17:35.54 | patp | These reg's need to be set in mddi to make it good: |
| 17:35.55 | patp | 0x400 < 0x8000 |
| 17:35.55 | patp | 0x680 < 0x8000 |
| 17:35.55 | patp | 0x600 < 0x4000 |
| 17:44.36 | cr2 | patp: 0x680 < 0x8000 is in the list |
| 17:44.50 | cr2 | patp: http://wiki.xda-developers.com/index.php?pagename=EpsonS1D13774 |
| 17:50.07 | oliwan | netripper, are you there? |
| 17:51.04 | oliwan | guess not |
| 17:52.45 | *** join/#htc-linux krisje8 (i=krisje8@gateway/shell/blinkenshell.org/x-808eaf69e123f05b) [NETSPLIT VICTIM] |
| 17:52.45 | *** join/#htc-linux hlbot (n=adm@iclem.net) [NETSPLIT VICTIM] |
| 17:52.56 | oliwan | i got the battery icon up in android on diam. Thing is its stuck at 50%. Does the vogue have a similar problem? |
| 18:00.13 | *** join/#htc-linux madCoder- (n=madcoder@c-71-225-238-170.hsd1.pa.comcast.net) |
| 18:03.58 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d87d23a.pool.einsundeins.de) |
| 18:04.38 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) |
| 18:06.12 | dcordes | patp: that's great we should add the blackstone machine in htc-msm-2.6.27 |
| 18:06.55 | dcordes | NetRipper: did you try with a differen sim? |
| 18:08.18 | cr2 | dcordes: it's the same epson setup |
| 18:20.35 | *** join/#htc-linux madCoder- (n=madcoder@c-71-225-238-170.hsd1.pa.comcast.net) |
| 18:22.32 | *** join/#htc-linux MethoS- (n=lem@host-091-096-214-082.ewe-ip-backbone.de) |
| 18:36.54 | *** join/#htc-linux Zinbolic (n=chatzill@84.238.80.215) |
| 18:48.42 | c4software | oliwan: On the raph ? |
| 18:49.46 | oliwan | c4, this is on the diam, but probably the same thing |
| 18:49.56 | c4software | Yhea i have diam too :P |
| 18:50.28 | c4software | The buttons problem are fix (navipad and co) |
| 18:50.47 | oliwan | im just playin around with the battery drivers. The questionmark has been replaced but its not really responsive. |
| 18:50.56 | oliwan | buttons are much better yeah |
| 18:51.03 | c4software | ah ? |
| 18:51.49 | c4software | its on git ? |
| 18:52.09 | oliwan | no not yet |
| 18:52.30 | c4software | i will wait so :P |
| 18:52.41 | tmzt | oliwan: did you modify android code for this? |
| 18:52.45 | oliwan | its not really working yet anyway |
| 18:53.05 | oliwan | tmzt, no just kernel code |
| 18:53.59 | c4software | Nice and the fix for the navipad on the diam, its on git ? |
| 18:54.49 | oliwan | yeah i think so. its working on mine. Although they are mapped upside down |
| 18:57.58 | c4software | I will try to compil the lastest. |
| 18:59.14 | *** join/#htc-linux Venny (i=Administ@h216-45-127-2.dynamic.platinum.ca) |
| 19:00.02 | oliwan | does anyone know what chip is in the diam for battery monitoring? |
| 19:04.14 | cr2 | oliwan: it's not accessed directly on raph/diam |
| 19:04.38 | cr2 | oliwan: so it's necessary to disassemble the amss to get an idea what it can be |
| 19:08.54 | c4software | oliwan: with your drive u can suspend android ? |
| 19:10.13 | oliwan | c4, no not yet |
| 19:10.30 | oliwan | cr2, thanks. thats the amss? |
| 19:10.42 | oliwan | *whats the amss? |
| 19:10.55 | c4software | ok :) |
| 19:12.42 | *** join/#htc-linux chab7 (n=kvirc@212.92.4.114) |
| 19:14.24 | c4software | Yes or no for : Enable MSM Framebuffer Refresh Thread (FB_MSM_REFRESH) ? |
| 19:14.38 | NetRipper | type ? |
| 19:14.41 | NetRipper | and read what it says |
| 19:14.42 | NetRipper | :) |
| 19:14.58 | NetRipper | oliwan, the AMSS is the modem software running on the ARM9 core |
| 19:15.04 | tmzt | NetRipper: bool? |
| 19:15.20 | NetRipper | tmzt, there's help info |
| 19:15.25 | c4software | i will try to copmpil the lastest kernel, the previos time i take yours NetRipper |
| 19:15.52 | tmzt | not needed for android though? does the help mention that? |
| 19:16.03 | NetRipper | tmzt, yes it does |
| 19:16.34 | c4software | zimage compil, i will try after launch :P |
| 19:16.35 | tmzt | how do you read the help in make config |
| 19:16.36 | NetRipper | oh |
| 19:16.38 | NetRipper | not specifically |
| 19:16.40 | *** join/#htc-linux patp (n=arf@87-194-56-160.bethere.co.uk) |
| 19:16.42 | NetRipper | + ---help--- |
| 19:16.42 | NetRipper | + The refresh thread will constantly perform a full screen |
| 19:16.42 | NetRipper | + update. This is neccesary when using X with the default |
| 19:16.42 | NetRipper | + fbdev driver. |
| 19:16.51 | c4software | I answer yes |
| 19:16.58 | NetRipper | c4software, you dont need it for android |
| 19:17.03 | NetRipper | only for X |
| 19:17.04 | tmzt | c4software: vi .config |
| 19:17.13 | cr2 | NetRipper: "this is needed for a working framebuffer" :) |
| 19:17.14 | tmzt | search CONFIG_FB_MSM_REFRESH |
| 19:17.14 | oliwan | netripper, why would that be related to battery drivers? |
| 19:17.40 | NetRipper | oliwan, the battery information is requested from the AMSS via proc_comm |
| 19:17.41 | c4software | thanks NetRipper & tmzt |
| 19:17.51 | c4software | i will try this on my diam after launch |
| 19:17.52 | c4software | :) |
| 19:17.54 | c4software | lunch |
| 19:17.58 | oliwan | lol |
| 19:18.09 | NetRipper | oliwan, it's a design choice by HTC.. the AMSS is responsible for certain things |
| 19:18.10 | tmzt | is HD 18bit? |
| 19:18.46 | NetRipper | maejrep[w], to be sure it's in your log ==> < patp> see here: http://forum.xda-developers.com/showpost.php?p=3363393&postcount=596 |
| 19:18.49 | cr2 | tmzt: even the vga panel on universal could do 18bit |
| 19:19.12 | NetRipper | dcordes, no still havent tried any further |
| 19:19.20 | oliwan | netripper, what dll is that on WM that need disassembling? |
| 19:19.27 | oliwan | for that? |
| 19:19.38 | NetRipper | oliwan, the proc comm is already documented on wiki |
| 19:19.49 | NetRipper | http://wiki.xda-developers.com/index.php?pagename=RaphaelResearch => proc_comm |
| 19:19.54 | cr2 | NetRipper: lol, disabling the SBI clock will be fun :) |
| 19:20.00 | NetRipper | cr2, how so? |
| 19:20.08 | NetRipper | what will happen? |
| 19:20.12 | cr2 | dont do it at home :) |
| 19:20.17 | NetRipper | what is SBI? |
| 19:20.18 | NetRipper | :) |
| 19:20.19 | c4software | if someone can explain to me how to fix the navipad on the diam i will try :) |
| 19:20.43 | NetRipper | c4software, ask j0b0 when he's here |
| 19:20.47 | NetRipper | he wrote the driver |
| 19:20.48 | cr2 | the pmic and radio amplifier will go south :) |
| 19:20.49 | c4software | okay |
| 19:21.17 | tmzt | cr2: you found the SBI/SSBI clock? |
| 19:21.18 | cr2 | NetRipper: the communication to pmic and radio will be lost |
| 19:21.21 | NetRipper | cr2, in that case, isn't AMSS responsible for that clock? |
| 19:21.28 | cr2 | SSBI is 1w for the touchscreen |
| 19:22.01 | cr2 | it is, but since the clock area is not protected, you can do it too. occasionally :) |
| 19:22.02 | tmzt | don't we already have a working touchscreen? what do you mean |
| 19:22.04 | NetRipper | why would we touch that clock when it's vital? we can't put it down in standby either as we'll need a signal from the AMSS if there's a call |
| 19:22.19 | cr2 | tmzt: SSBI is used for the touchscreen. |
| 19:22.41 | cr2 | tmzt: the SBI is a spi-type bus for pmic, audio codec and such things. |
| 19:22.54 | c4software | is afk |
| 19:23.01 | tmzt | oh, the qualcomm pages suggested they were related |
| 19:23.26 | tmzt | but I'm still not getting it, if the touchscreen driver works (with i2c??) is that i2c over the ssbi registers? |
| 19:23.50 | *** join/#htc-linux mrmoku (n=mrmoku@ppp-93-104-108-63.dynamic.mnet-online.de) |
| 19:24.17 | *** join/#htc-linux TripleQ (n=joost@ip49-198-173-82.adsl2.static.versatel.nl) |
| 19:24.25 | NetRipper | touchscreen driver is not i2c |
| 19:24.34 | NetRipper | we directly access the hardware registers |
| 19:24.35 | tmzt | what device? |
| 19:24.55 | *** join/#htc-linux Pure4Real (n=pure4rea@89-97-140-219.ip17.fastwebnet.it) |
| 19:24.57 | cr2 | tmzt: raph/diam/blac |
| 19:25.23 | tmzt | ah, I must be thinking kais then |
| 19:25.41 | cr2 | kais monitors the battery over i2c too |
| 19:28.16 | dcordes | cr2: can you try ppp? |
| 19:29.32 | *** join/#htc-linux pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 19:38.33 | cr2 | dcordes: not right now (=disconnect). and i need the linload.exe with NAND support from NetRipper :) |
| 19:39.34 | NetRipper | oh crap yes i said i'd do that today :p |
| 19:40.02 | NetRipper | cr2, btw i dont have the tooling to cross compile that memtest app you gave the link to |
| 19:43.47 | *** join/#htc-linux Xime (n=xime@bankize.net) |
| 19:45.48 | *** join/#htc-linux Shinto (n=John@g228207199.adsl.alicedsl.de) |
| 19:48.02 | patp | can anyone send me the raw image used by Android for wallpaper? |
| 19:49.50 | cr2 | NetRipper: hmm. is it something special ? |
| 19:54.06 | *** join/#htc-linux cr2_ (n=cr2@ip-90-186-114-254.web.vodafone.de) |
| 19:55.16 | NetRipper | what do you mean, something special? |
| 19:55.33 | NetRipper | the memtest app is pretty simple but i dont have a cross compile toolchain setup |
| 19:55.36 | NetRipper | it misses headers |
| 19:58.46 | cr2_ | ok |
| 20:00.14 | NetRipper | cr2, you'll be able to configure the partitions via cmdline (http://netripper.pastebin.com/m59a242dc) |
| 20:01.23 | NetRipper | oh i also see a nand_partitions.c in mach-mms |
| 20:01.26 | NetRipper | msm |
| 20:01.36 | NetRipper | not sure if it cancels out the cmdline |
| 20:01.50 | cr2_ | 512-5mb |
| 20:02.05 | cr2_ | create such a partition starting at 0 |
| 20:02.11 | NetRipper | what's in that 5mb? |
| 20:02.29 | cr2_ | invisible |
| 20:02.31 | cr2_ | SPL , mfg and such things |
| 20:03.16 | NetRipper | that all fits in the 5mb? |
| 20:03.34 | NetRipper | that nand_partitions.c reads partitions from tags |
| 20:07.30 | cr2_ | http://wiki.xda-developers.com/index.php?pagename=RaphaelNAND |
| 20:07.40 | *** join/#htc-linux wdslbr (n=wdslbr@dslb-088-069-250-031.pools.arcor-ip.net) |
| 20:08.58 | NetRipper | cr2_, according to that spl etc is at start |
| 20:09.01 | NetRipper | not at end |
| 20:09.37 | cr2_ | NetRipper: ok, then it's too difficult, and needs an #ifndef ANDROId override |
| 20:09.59 | cr2_ | NetRipper: true, but for us the 0 is at +0x420000 |
| 20:10.15 | cr2_ | as druidu has learned :) |
| 20:10.25 | NetRipper | er |
| 20:11.19 | NetRipper | in that case we dont have 512M of course |
| 20:11.23 | NetRipper | the complete nand is 512M |
| 20:11.31 | NetRipper | only the storage bit is a lot less |
| 20:11.43 | cr2_ | npviewer.bin[10266]: segfault at 65 ip b7e0e1f5 sp bfb53260 error 4 in libgtk-x11-2.0.so.0.1200.9[b7b87000+380000] |
| 20:12.28 | cr2_ | i hate this 32bit compatibilty stuff |
| 20:13.45 | cr2_ | i'll be away for 20min |
| 20:13.50 | *** join/#htc-linux MethoS- (n=lem@host-091-097-241-086.ewe-ip-backbone.de) |
| 20:14.27 | *** join/#htc-linux StarLite (n=nnscript@s55916ca6.adsl.wanadoo.nl) |
| 20:18.45 | dream_kill | nand map is wrong |
| 20:19.05 | dream_kill | at 0x0000 is ocboot |
| 20:19.10 | dream_kill | then oemsbl |
| 20:19.26 | dream_kill | them ammr |
| 20:19.34 | dream_kill | and thela much later is spl |
| 20:21.58 | *** join/#htc-linux MethoS-- (n=lem@host-091-096-212-131.ewe-ip-backbone.de) |
| 20:26.14 | NetRipper | cr2_, the cmdline overrides the nand_devices.c, so you can configure your partitions in haret |
| 20:30.52 | *** join/#htc-linux wdslbr_ (n=asa@dslb-088-069-250-031.pools.arcor-ip.net) |
| 20:31.55 | NetRipper | cr2_, http://www.netripper.com/raphael/zImage-nand-00 |
| 20:32.15 | NetRipper | cr2_, not a linload.exe, as you cant change cmdline then |
| 20:36.59 | *** join/#htc-linux stefan_schmidt (n=stefan@p5B0376EC.dip.t-dialin.net) |
| 20:39.44 | c4software-afk | re |
| 20:41.21 | cr2_ | dream_kill: the map is in relative offsets |
| 20:41.35 | cr2_ | <PROTECTED> |
| 20:43.01 | c4software | what is this nand ? |
| 20:48.21 | toer_ | http://letmegooglethatforyou.com/?q=nand |
| 20:49.04 | c4software | i know what is "nand" but i don't know what is the utility in the diam |
| 20:50.24 | NetRipper | the "internal internal" storage of the device, that holds wince, spl etc is nand |
| 20:50.31 | *** join/#htc-linux TheiPirate (i=user@wireless-128-62-157-70.public.utexas.edu) |
| 20:50.47 | c4software | okay thanks |
| 20:50.48 | c4software | :) |
| 20:50.58 | NetRipper | do NOT use that zimage btw |
| 20:51.04 | NetRipper | unless you want to brick your device |
| 20:52.01 | c4software | yep yep i don't use it |
| 20:52.36 | c4software | i try the 2.6.27 on git :p |
| 20:52.51 | tmzt | NetRipper: was it ever figured out why nand was a problem (leading to brick), was it just that offset mentioned earlier? |
| 20:53.00 | tmzt | I mean how can mtdro brick a device |
| 20:53.13 | cr2_ | tmzt: it was not ro |
| 20:53.27 | cr2_ | so android used it to the full extent |
| 20:53.54 | tmzt | oh, it didn't realize they were testing android on it |
| 20:54.11 | tmzt | and the partitions were wrong or it was using the g1's partition table? |
| 20:54.17 | NetRipper | using the g1's |
| 20:54.25 | c4software | you testing what ? |
| 20:55.10 | *** part/#htc-linux TheiPirate (i=user@wireless-128-62-157-70.public.utexas.edu) |
| 20:57.11 | c4software | NetRipper: What are you made to get a good compilation of 2.6.27 on git (i mean, touchscreen, right now when i press on the screen its only move the top bar of android) |
| 20:57.29 | NetRipper | c4software, then you still have the same problem |
| 20:57.40 | NetRipper | c4software, i dont know why you have that problem |
| 20:58.01 | NetRipper | the kernel i built (and is working) is exactly what is in the git right now |
| 20:58.15 | c4software | its strange |
| 20:58.18 | balsat | c4software: make clean did it for me |
| 20:58.21 | NetRipper | maybe you're using a different android version? |
| 20:58.38 | c4software | hmm i don't think its the lasest on connect-utb |
| 20:58.45 | NetRipper | make clean && make clean ARCH=arm |
| 20:58.47 | c4software | okay i try balsat |
| 20:58.59 | NetRipper | hm im not using the latest on connect-utb.. im using one older |
| 20:59.05 | NetRipper | the one of 3 feb |
| 20:59.09 | NetRipper | iirc |
| 20:59.20 | NetRipper | the latest version gives an error when i open the browser |
| 21:00.29 | c4software | i will try with a make clean before |
| 21:00.40 | NetRipper | do a make clean && make clean ARCH=arm |
| 21:00.47 | NetRipper | they clean different things |
| 21:04.54 | NetRipper | ard MTD partition names important in the sence that they must match what's on the device? or doesn't it matter when reading partitions? |
| 21:06.44 | c4software | i will try after clean |
| 21:07.20 | NetRipper | c4software, did you have it working when you used my precompiled zImage? |
| 21:07.38 | c4software | yep its working with you zImage |
| 21:07.42 | NetRipper | ok |
| 21:07.42 | c4software | same after clean |
| 21:07.44 | c4software | :( |
| 21:07.45 | NetRipper | then your android is fien |
| 21:07.47 | NetRipper | fine |
| 21:09.27 | c4software | its maybe how i compil my kernel ? |
| 21:09.38 | NetRipper | i think we already went over that |
| 21:09.47 | NetRipper | what toolchain are you using? |
| 21:10.37 | c4software | arm-2008q1 |
| 21:10.45 | c4software | to compil i have do that : http://pastebin.com/m46d9910e |
| 21:10.52 | NetRipper | im using q3, but q1 should be fine |
| 21:11.31 | NetRipper | i leave 'zImage' out of that make line, but shouldnt matter either |
| 21:11.40 | NetRipper | whats the output of: cat .config | grep WAKELOCK |
| 21:12.01 | c4software | # CONFIG_WAKELOCK is not set |
| 21:12.08 | NetRipper | you're not using the latest git |
| 21:12.13 | c4software | what |
| 21:12.29 | c4software | i do git fetch |
| 21:12.41 | NetRipper | git fetch only fetches, but doesn't update your local branch |
| 21:12.47 | NetRipper | you have to do git pull |
| 21:13.03 | NetRipper | or git fetch && git merge |
| 21:13.13 | c4software | arg :S sorry for the misstake |
| 21:13.17 | c4software | realy sorry :S |
| 21:13.31 | NetRipper | ;) |
| 21:14.32 | NetRipper | tmzt, do you know if MTD partition names are important? |
| 21:15.09 | tmzt | for? |
| 21:15.16 | NetRipper | in general |
| 21:15.28 | NetRipper | when defining mtd partitions, you have to set their 'name' |
| 21:15.29 | c4software | hop recompil kernel. i hope its that :D |
| 21:15.47 | c4software | what are you trying ? |
| 21:15.59 | NetRipper | c4software, mtd = nand |
| 21:16.19 | NetRipper | tmzt, i.e. must the name match what's written on the nand itself? or doesn't it matter? |
| 21:16.35 | c4software | yep, but what are you trying with manipulate nand ? |
| 21:16.51 | tmzt | I don't think so |
| 21:17.01 | NetRipper | c4software, well it would be nice to be able to mount the internal storage (wince partition) wouldnt it? :) |
| 21:17.12 | tmzt | the name is for mtd utility, mounting uses the /dev/mtdX device |
| 21:17.13 | c4software | :) nice idea :) |
| 21:17.30 | tmzt | but android (flashtool) will expect the names match it's own |
| 21:17.37 | NetRipper | ok |
| 21:17.37 | tmzt | system, data, radio, etc. |
| 21:21.53 | c4software | booting |
| 21:22.24 | c4software | freeze... |
| 21:23.33 | NetRipper | cr2_, example cmdline parameter: mtdparts=msm_nand:507M(testdata)ro,-(rest) |
| 21:23.51 | NetRipper | cr2_, although this one gives this at boot: |
| 21:23.52 | NetRipper | [ 5.050748] mtd: msm_nand: partitioning exceeds flash size, truncating |
| 21:24.00 | NetRipper | so need to recheck the partition sizes ;) |
| 21:24.34 | NetRipper | catting /dev/mtd0 or /dev/mtdblock0 doesn't do anything though |
| 21:24.50 | c4software | Yhea its okay |
| 21:24.51 | c4software | :) |
| 21:24.57 | NetRipper | c4software, good |
| 21:25.30 | NetRipper | cr2_, i think we may need to modify the driver to read different block sizes.. as far as i remember druidu did that as well to make it output something |
| 21:25.34 | c4software | and navipad seems okay |
| 21:29.55 | *** join/#htc-linux ChanServ (ChanServ@services.) |
| 21:29.55 | *** mode/#htc-linux [+o ChanServ] by irc.freenode.net |
| 21:31.27 | cr2_ | NetRipper: i think it's all documented ? |
| 21:32.11 | cr2_ | http://wiki.xda-developers.com/index.php?pagename=MSM_NANDID |
| 21:33.57 | cr2_ | heh. why does the phone not work on blac100 ? |
| 21:34.30 | tmzt | the ce amss smd driver doesn't have packet mode on channel 1 right? |
| 21:34.59 | tmzt | I should say raph800/vogue |
| 21:35.13 | tmzt | but it should apply to both cdma and gsm |
| 21:35.21 | NetRipper | so the raphael has the samsung_kby00n00hm |
| 21:36.10 | cr2_ | tmzt: raph100 works with the stock g1 smd driver |
| 21:36.26 | tmzt | what is the packet mode in the trout driver? |
| 21:36.33 | tmzt | does it work with ppp? |
| 21:36.36 | cr2_ | NetRipper: blksiz=0x800 |
| 21:36.38 | NetRipper | cr2_, ok so according to wiki also 2048 blocksize |
| 21:37.04 | NetRipper | cr2_, yet i do remember druidu had to make some changes to the code to get output |
| 21:37.40 | cr2_ | NetRipper: the code assumes 0x200 blksiz ? |
| 21:38.03 | cr2_ | NetRipper: i remember that the nand driver was not very clean |
| 21:38.05 | NetRipper | cr2_, no, 2048 |
| 21:38.13 | tmzt | http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=blob;f=arch/arm/mach-msm/smd.c;h=ce91b7476d8219cdb6673293d9e46003cc306b5f;hb=htc-msm-2.6.27 |
| 21:38.13 | cr2_ | with some values hardcoded |
| 21:38.20 | tmzt | line 563 |
| 21:38.21 | NetRipper | cr2_, at least, erase and write block size are 2048.. cant find read block size |
| 21:39.45 | *** join/#htc-linux azenned (n=chatzill@41.224.149.228) |
| 21:40.21 | NetRipper | tmzt, it's probably used to differentiate between character and binary channels |
| 21:40.32 | NetRipper | tmzt, im just guessing though |
| 21:40.53 | NetRipper | smd1 is usually data.. and the data channels on raph100 are on 7+ |
| 21:40.59 | tmzt | yeah, why does it work on raph100 with this code |
| 21:40.59 | NetRipper | (so thats > 4) |
| 21:41.27 | tmzt | no, it says somewhere else the packet channels are limited by size |
| 21:41.36 | cr2_ | Note: This procedure won't remove windows mobile from your phone. |
| 21:41.49 | NetRipper | cr2_? |
| 21:42.57 | *** part/#htc-linux TripleQ (n=joost@ip49-198-173-82.adsl2.static.versatel.nl) |
| 21:43.13 | NetRipper | im going to take a break.. bbl ;) |
| 21:43.36 | cr2_ | i'm comparing the sirf3 tracks with raph100 |
| 21:44.12 | *** join/#htc-linux miknix (n=miknix@gentoo/developer/miknix) |
| 21:44.17 | cr2_ | raph100 is a piece of shit, if you are not in the plain field |
| 21:46.40 | tmzt | cr2_: does ppp work on raph100? is that on smd1 |
| 21:47.10 | cr2_ | smd7 |
| 21:47.28 | cr2_ | the smd layout is set by oemsbl |
| 21:47.32 | tmzt | but still greater than 4 |
| 21:47.45 | tmzt | so it's packet with trout driver? |
| 21:48.09 | cr2_ | i think so |
| 21:52.32 | tmzt | SMEM_TSSC_BUSY? |
| 21:52.50 | tmzt | would this tell us when the adc is done? |
| 21:53.04 | cr2_ | where did you find it ? |
| 21:53.16 | tmzt | smd_private.h |
| 21:54.52 | tmzt | if the touchscreen is connected to a bus on the amss, the amss is responsible for reading from the touchscreen? |
| 21:55.00 | tmzt | is TSSC base in the smem? |
| 21:56.08 | tmzt | a bus on the arm9 I mean |
| 21:57.07 | cr2_ | TSSC is 0xaa3* afair |
| 21:58.33 | tmzt | why is an enum used for that table? |
| 21:58.56 | tmzt | smem_alloc |
| 22:02.05 | cr2_ | smem_alloc only searches in sram. |
| 22:03.46 | *** join/#htc-linux woodson (n=CDP@c-68-54-66-168.hsd1.fl.comcast.net) |
| 22:04.26 | cr2_ | <PROTECTED> |
| 22:07.26 | cr2_ | tmzt: it's just some info |
| 22:07.36 | cr2_ | SMEM_TSSC_BUSY |
| 22:07.51 | tmzt | what does it mean? |
| 22:08.21 | tmzt | we don't have driver using it, I guess dzo and octavio?? didn't see it used in wm |
| 22:08.38 | *** join/#htc-linux wdslbr (n=asa@dslb-088-069-250-031.pools.arcor-ip.net) |
| 22:09.27 | *** join/#htc-linux MaRx88 (n=IceChat7@chello089077138234.chello.pl) |
| 22:11.47 | cr2_ | it's just some info location somewhere in smem |
| 22:12.00 | cr2_ | nothig really useful |
| 22:15.04 | tmzt | anyway, I thought this might be related to the phone call to use touchscreen issue |
| 22:15.19 | tmzt | as if something is not getting set so amss is not updating it's registers |
| 22:15.22 | *** join/#htc-linux drasar (n=maik@213.192.21.13) |
| 22:18.56 | *** join/#htc-linux Zinbolic (n=chatzill@84.238.80.215) |
| 22:35.15 | *** join/#htc-linux nebi (n=nebi@170.ftth2.cust.fyrobs1.upps.se.borderlight.net) |
| 22:38.08 | maejrep | cr2_: how do you unset the mdp dithering flag? :o |
| 22:38.09 | NetRipper | TSSC_BUSY is set while it is updating the values in memory |
| 22:40.45 | cr2_ | maejrep: in mdp.c |
| 22:41.30 | cr2_ | NetRipper: i see ts1,ts2,ts1 in wince |
| 22:41.39 | cr2_ | NetRipper: ts2,ts1 on release. |
| 22:41.45 | *** join/#htc-linux imfloflo (n=imfloflo@34.158.119-80.rev.gaoland.net) |
| 22:41.48 | imfloflo | ~seen dzo |
| 22:41.48 | apt | dzo <n=dzo@121-98-128-127.bitstream.orcon.net.nz> was last seen on IRC in channel #htc-linux, 6d 22h 59m 39s ago, saying: 'maejrep: ok, thanks; I'll keep trying.'. |
| 22:42.01 | NetRipper | cr2_, i've extensively researched the interrupts.. and they're not reliable |
| 22:43.21 | cr2_ | ok |
| 22:44.06 | cr2_ | NetRipper: can you update the uart2dm config for bt ? |
| 22:44.23 | NetRipper | what is uart2d? |
| 22:44.26 | NetRipper | m |
| 22:45.46 | cr2_ | check bard-trout.c for uart1dm |
| 22:46.33 | NetRipper | not found |
| 22:46.34 | NetRipper | :p |
| 22:46.45 | NetRipper | uart1_dm |
| 22:46.51 | NetRipper | uart_dm1 |
| 22:46.52 | NetRipper | i mean |
| 22:49.36 | tmzt | msm_device_uart_dm1 |
| 22:49.39 | tmzt | or 2 |
| 22:50.42 | tmzt | what's this 0x32, is that a h4 command or bcm protocol whatever it is? |
| 22:51.47 | cr2_ | tmzt: where ? |
| 22:52.26 | tmzt | .inject_rx_on_wakeup = 1, .rx_to_inject = 0x32, |
| 22:52.33 | tmzt | in msm_uart_dm1_pdata |
| 22:52.42 | NetRipper | and the GPIO |
| 22:54.00 | cr2_ | tmzt: don't know |
| 22:54.04 | cr2_ | NetRipper: 45 ? |
| 22:54.53 | cr2_ | <PROTECTED> |
| 22:55.28 | cr2_ | the alt should be configured for |
| 22:55.28 | cr2_ | 19 0x13 0x10,0 3 O BT TX BT TX |
| 22:55.28 | cr2_ | <PROTECTED> |
| 22:55.29 | cr2_ | 108 0x6c 8,1 1 O BT RTS ? |
| 22:57.02 | cr2_ | maejrep: do you have some user-friendly alt parser ? |
| 22:57.11 | maejrep | alt parser? |
| 22:57.46 | maejrep | oh, for gpio alt func? |
| 22:57.47 | cr2_ | alt -> drvstr,alt,pull |
| 22:57.59 | cr2_ | yes. |
| 22:58.01 | maejrep | no, I just do the math :p |
| 22:58.04 | cr2_ | lol |
| 22:58.13 | cr2_ | then i'll wrtie a small perl script |
| 22:58.23 | cr2_ | 1450m 315m 28m S 100 10.9 5:22.44 java |
| 22:58.37 | maejrep | yikes |
| 22:58.46 | maejrep | why is that |
| 22:59.01 | tmzt | eclipse? |
| 22:59.14 | cr2_ | josm |
| 23:06.51 | *** join/#htc-linux p3t3r__ (n=peter@wlan.net-you.de) |
| 23:09.32 | *** join/#htc-linux Student (n=Student@62.16.118.7) |
| 23:12.05 | *** part/#htc-linux Student (n=Student@62.16.118.7) |
| 23:12.44 | *** join/#htc-linux Student (n=Student@62.16.118.7) |
| 23:21.00 | *** join/#htc-linux cmonex (n=xy6091@lys3m1wsgs.adsl.datanet.hu) |
| 23:25.09 | lupine_85 | the sweet smell of process? :p |
| 23:25.20 | lupine_85 | erm, progress |
| 23:27.44 | cr2_ | alt_reg_val=0x10 alt=0x4 pull=0 (GPIO_NO_PULL) drvstr=0 (GPIO_2MA) |
| 23:28.08 | cr2_ | alt_reg_val=0x8 alt=0x2 pull=0 (GPIO_NO_PULL) drvstr=0 (GPIO_2MA) |
| 23:28.48 | cr2_ | NetRipper: the rest is in http://wiki.xda-developers.com/index.php?pagename=Raphael_GPIO |
| 23:28.54 | cr2_ | and pasted above |
| 23:29.21 | c4software | I had to Go |
| 23:29.26 | descention | i wish i knew how to help development... |
| 23:29.27 | c4software | see you later everyone |
| 23:29.31 | descention | bye |
| 23:32.54 | maejrep | lupine_85: not really.. i had the raph800 lcd almost working, and had smd0 working, then I must have changed something, cause now it won't boot, and I don't know what change broke it :s |
| 23:34.12 | tmzt | cr2_: is it possible to use pwm on the vibrator motor vreg? |
| 23:35.26 | maejrep | tmzt: spl has a "slow vibra" mode, when you set the vreg level to about half |
| 23:35.47 | tmzt | how is that done? |
| 23:35.49 | maejrep | but I tried it, and it didn't seem to affect the standard vibrate |
| 23:35.53 | maejrep | vreg_set_level ;) |
| 23:36.13 | lupine_85 | maejrep: no revision history, then? ;) |
| 23:36.27 | maejrep | lupine_85: yeah it makes me want to setup svn locally or something :/ |
| 23:36.34 | lupine_85 | git is your friend |
| 23:36.36 | lupine_85 | and mercurial |
| 23:36.46 | lupine_85 | svn's alright |
| 23:36.54 | maejrep | I don't know how to use git still :p |
| 23:37.09 | lupine_85 | you can setup inotify to commit locally evey time you save a file - or some editors can do it automatically |
| 23:37.11 | maejrep | can you keep a local revision history in git without having commit access? |
| 23:37.30 | lupine_85 | well, you create a local branch and commit to that |
| 23:37.50 | maejrep | that sounds like something I'd want to setup ;) |
| 23:37.55 | lupine_85 | git is mostly beyond me |
| 23:38.38 | cr2_ | tmzt: dzo says something like "yes" |
| 23:39.07 | maejrep | cr2_: I didn't get it to work |
| 23:39.12 | cr2_ | ok |
| 23:39.18 | cr2_ | wince does not use it too |
| 23:39.21 | maejrep | but didnt' spend much time on it :p |
| 23:39.25 | tmzt | San said g1 doesn't use the vibrate function on msm and doesn't know if it would work |
| 23:39.28 | maejrep | dunno what use it would be |
| 23:39.37 | tmzt | but I mean the vreg pwm bits |
| 23:39.53 | maejrep | pwm=pulse width modulation? |
| 23:39.57 | cr2_ | g2 does rpc for vibra |
| 23:40.04 | maejrep | oh fun... |
| 23:40.16 | tmzt | g2 is Magic? |
| 23:40.18 | cr2_ | tmzt: the vreg control is only on/off and voltage |
| 23:40.25 | cr2_ | sapphire |
| 23:40.26 | maejrep | tmzt: it's not all that |
| 23:40.29 | maejrep | snickers |
| 23:40.42 | tmzt | Sapphire, haven't seen code for that |
| 23:40.47 | tmzt | where did you see it |
| 23:40.54 | cr2_ | tmzt: unless you'll get the pmic datasheet ;) |
| 23:41.15 | tmzt | have you found the sbi connection pmic? |
| 23:41.22 | tmzt | like how you would send bytes |
| 23:41.28 | tmzt | connection to |
| 23:41.34 | cr2_ | http://android.git.kernel.org/?p=kernel/msm.git;a=commitdiff;h=bfc1ddcfbb173df6d2daed1ee4abec7a7f344630 |
| 23:41.34 | maejrep | cr2_: according to spl, there is a place where it sets the vreg pmic voltage to something lower, and has a printk that says something like "slow vibra" |
| 23:41.52 | cr2_ | maejrep: didn't see it |
| 23:42.15 | cr2_ | tmzt: [ARM] sapphire: Initial import of Sapphire board support 46/8946/1 |
| 23:42.20 | maejrep | I've seen it do that when I was trying to mess around with cdma workshop and qpst, where it put the phone into a "download mode" that didn't work |
| 23:42.28 | maejrep | it just started vibrating very slowly |
| 23:42.38 | cr2_ | ok |
| 23:45.56 | *** join/#htc-linux apt (i=ibot@rikers.org) |
| 23:45.56 | *** topic/#htc-linux is HTC Linux Channel: Find logs at http://apt.rikers.org/%23htc-linux/ | please check http://handhelds.org/moin/moin.cgi/HTC_2dPhones | http://wiki.xda-developers.com/index.php?pagename=Xanadux | <cr2> let's define a common setup. |
| 23:46.36 | *** join/#htc-linux MaRciN_PL (n=IceChat7@chello089077138234.chello.pl) |
| 23:48.35 | *** join/#htc-linux BHSPitMonkey (n=stephen@unaffiliated/bhspitmonkey) |