| 00:07.38 | *** join/#htc-linux konsta (n=asds@host81-157-60-163.range81-157.btcentralplus.com) |
| 00:08.40 | *** join/#htc-linux miknix (n=miknix@gentoo/developer/miknix) |
| 00:11.00 | asj_xda | ok, time to go to bed :( |
| 00:11.05 | asj_xda | CU L8r |
| 00:11.12 | *** part/#htc-linux asj_xda (n=asj@130.78.broadband3.iol.cz) |
| 00:39.10 | NetRipper | cr2, does the SMI ram have a performance difference compared to EBI ram? |
| 00:52.12 | NetRipper | [ 0.000000] Ignoring RAM at 20000000-27ffffff (vmalloc region overlap). |
| 00:52.14 | NetRipper | harr |
| 00:52.46 | NetRipper | there goes 128mb |
| 01:00.41 | NetRipper | MemTotal: 219120 kB |
| 01:00.41 | NetRipper | MemFree: 214972 kB |
| 01:00.47 | NetRipper | awesome |
| 01:01.13 | maejrep | you got sparse mem working? |
| 01:01.19 | NetRipper | yes |
| 01:01.24 | maejrep | sweet |
| 01:01.34 | maejrep | using sparsemem or discontigmem? |
| 01:01.45 | NetRipper | emmm |
| 01:01.47 | NetRipper | using the fixup |
| 01:01.52 | NetRipper | (does that answer it?) |
| 01:01.59 | NetRipper | two memory banks defined |
| 01:02.14 | NetRipper | and moved vmalloc space to 0x3* |
| 01:02.19 | maejrep | check .config for SPARSEMEM |
| 01:02.39 | NetRipper | not set |
| 01:02.44 | NetRipper | flatmem=y |
| 01:02.51 | NetRipper | flat_node_mem_map=y |
| 01:02.51 | maejrep | odd |
| 01:03.07 | NetRipper | flatmem_manual |
| 01:03.32 | NetRipper | i want to verify if i can actually read/write it all |
| 01:03.38 | NetRipper | well, mostly the 2nd bank |
| 01:05.28 | *** join/#htc-linux Venny (i=Travis@h216-45-127-2.dynamic.platinum.ca) |
| 01:05.36 | NetRipper | mknod /dev/mem c 1 1 doesn't even work |
| 01:08.45 | NetRipper | maejrep, i still consistently get a BUG (regarding mutex) when pressing capslock (and it makes my "fn" led light up) ;) |
| 01:09.05 | maejrep | those were both already fixed :| |
| 01:09.21 | NetRipper | maybe i didnt see the patches? |
| 01:09.44 | maejrep | the BUG is fixed by removing the mutex lock in the ksc set led function |
| 01:09.53 | maejrep | I think it was in PM that I mentioned it |
| 01:10.10 | maejrep | the Fn vs CAPS LED is the position of the constants in the .h file |
| 01:10.27 | NetRipper | aha |
| 01:10.28 | NetRipper | ok |
| 01:10.37 | NetRipper | i thought removing the mutex was just a temporary solution |
| 01:10.42 | NetRipper | i assume it was there for a reason :) |
| 01:10.46 | maejrep | but the fn led can't really be controlled very easily by the input subsystem, because it doesn't know how to handle a fn-lock-type event |
| 01:11.08 | maejrep | well, it could probably be replaced by a spinlock |
| 01:11.17 | NetRipper | nope doesnt work ;) |
| 01:11.18 | NetRipper | already tried |
| 01:11.19 | maejrep | or a workqueue |
| 01:11.41 | maejrep | actually, it should already be using a workqueue |
| 01:12.30 | maejrep | the mutex lock actually shouldn't be necessary |
| 01:12.43 | maejrep | the operations on the property are atomic |
| 01:12.57 | maejrep | data->led_state |= led; |
| 01:13.01 | maejrep | &= ~led |
| 01:13.03 | maejrep | = 0 |
| 01:13.09 | maejrep | none of those need a mutex |
| 01:14.24 | NetRipper | ok |
| 01:16.01 | maejrep | if you can figure out a way to let the input subsystem treat the function key as something that drives the LED (traditionally: numlock, capslock, scrolllock, compose), while still letting it modify the result like a meta key, that's ultimately what we'd need :p |
| 01:17.08 | maejrep | the alternative is that we keep track of the sticky locks in the keypad driver, but that's suboptimal |
| 01:17.40 | NetRipper | but is it a sticky key |
| 01:17.50 | NetRipper | i.e. shift/ctrl arent sticky keys |
| 01:17.58 | maejrep | shift is in wince |
| 01:18.06 | NetRipper | true |
| 01:18.06 | maejrep | that's what i mean by sticky |
| 01:18.19 | NetRipper | hm |
| 01:18.19 | NetRipper | ok |
| 01:18.25 | NetRipper | i didnt know that actually |
| 01:18.25 | maejrep | shift once = 5-7s caps lock, or until the next key is pressed |
| 01:18.47 | maejrep | the linux input subsystem doesnt have a way to do that, outside of accessibility sticky keys |
| 01:18.48 | NetRipper | shift is capslock if its pressed twice |
| 01:18.57 | maejrep | right, that's the 2nd part of it :p |
| 01:19.02 | NetRipper | oh ok |
| 01:19.02 | NetRipper | :P |
| 01:19.12 | maejrep | and input subsystem certainly can't handle that ;p |
| 01:19.51 | maejrep | so we would need to either keep track of those in the keypad or ksc drivers, or have a userland app that takes care of it |
| 01:20.13 | maejrep | in the meantime it's really not a necessity |
| 01:20.25 | maejrep | and i guess g1 got around that by not having modifier LEDs to begin with ;) |
| 01:20.58 | maejrep | sticky shift can be handled in X |
| 01:21.39 | NetRipper | hehe |
| 01:22.33 | *** join/#htc-linux dzo_ (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 01:22.49 | NetRipper | pff |
| 01:24.24 | maejrep | any idea why the navi doesn't get initialized for me? |
| 01:24.31 | maejrep | i don't even see the __init printk |
| 01:24.36 | maejrep | and it's in my makefile |
| 01:24.51 | NetRipper | errr |
| 01:25.58 | NetRipper | check if it is in the i2c_devices[] array in your boardfile |
| 01:26.00 | NetRipper | though |
| 01:26.04 | NetRipper | it must be if you have latest git |
| 01:26.05 | NetRipper | :P |
| 01:26.05 | maejrep | it is |
| 01:26.49 | *** join/#htc-linux venny_ (i=Travis@h216-45-127-2.dynamic.platinum.ca) |
| 01:28.35 | maejrep | and now i do see it :( |
| 01:28.47 | maejrep | maybe i just didn't sync or umount properly before trying to boot last time |
| 01:29.22 | NetRipper | heh ok, glad its resolved anyhows |
| 01:29.28 | NetRipper | # cat /dev/mem |
| 01:29.28 | NetRipper | cat: read error: Bad address |
| 01:29.31 | NetRipper | not very good is it |
| 01:31.47 | maejrep | you can't just cat the file |
| 01:31.55 | maejrep | try using dd |
| 01:32.02 | NetRipper | dd gives the same |
| 01:32.14 | NetRipper | or well |
| 01:32.21 | NetRipper | i guess i should give it offsets? |
| 01:32.28 | maejrep | yes |
| 01:34.51 | maejrep | is the action led on the navi only supposed to light up with up/down ? |
| 01:35.03 | NetRipper | when you touch it |
| 01:35.06 | NetRipper | oh |
| 01:35.10 | maejrep | doesn't light up when just touching the action button itself, or when touching left/right |
| 01:35.13 | NetRipper | yes it does it for me too |
| 01:35.18 | NetRipper | same behaviour |
| 01:35.21 | maejrep | so only up/down? |
| 01:35.33 | NetRipper | yes and it becomes irregular when you sooth over it |
| 01:35.51 | NetRipper | not sure if its intended behaviour |
| 01:35.56 | maejrep | that's a nifty effect :p |
| 01:36.55 | maejrep | so is there anything i should notice about the ts driver in console? |
| 01:37.07 | NetRipper | no |
| 01:37.10 | maejrep | other than what appears to be as better responsiveness |
| 01:37.13 | NetRipper | it shouldnt flicker |
| 01:37.17 | maejrep | s/be/me/ |
| 01:37.25 | maejrep | flicker? |
| 01:37.33 | NetRipper | yep when text scrolls |
| 01:37.47 | maejrep | I get the onscreen keyboard staying on the screen as text scrolls |
| 01:37.56 | NetRipper | yep previously it flickered |
| 01:37.57 | maejrep | and parts of it black out as it redraws text |
| 01:38.05 | maejrep | ah |
| 01:38.10 | NetRipper | it should be steady |
| 01:38.48 | maejrep | well like right now, after closing the clamshell, I can still see "bks, hom, pgu, pgd, enter" on the screen, in its landscape position |
| 01:38.56 | maejrep | but the actual keyboard is on the top |
| 01:39.07 | maejrep | I'm also getting start_dma messages from msmfb |
| 01:39.17 | maejrep | [ 618.797786] msmfb_start_dma 57.434 ms after vsync request |
| 01:39.17 | maejrep | [ 635.649868] msmfb_start_dma 59.478 ms after vsync request |
| 01:40.44 | NetRipper | # dd if=/dev/mem of=/mmc/memdump.bin skip=20000000b count=128M |
| 01:40.44 | NetRipper | dd: /dev/mem: Bad address |
| 01:40.58 | NetRipper | yes i get those start_dma thingies too, not sure where they come from |
| 01:41.19 | maejrep | probably in msmfb_start_dma() ;) |
| 01:41.34 | NetRipper | they're harmless though, just means its a bit slower than expected |
| 01:41.34 | NetRipper | ;) |
| 01:42.05 | maejrep | i need to figure out why the htc_battery driver is turning off usb :x |
| 01:42.11 | NetRipper | i have a callback mechanism added to msmfb, just before the dma starts.. it's where msm_ts and msm_vkeyb do their drawing |
| 01:43.11 | NetRipper | oh nice, null pointer when catting kmem |
| 01:43.19 | maejrep | heh |
| 01:45.29 | NetRipper | i dont get the Bad address thingy |
| 01:47.31 | NetRipper | even a cat /dev/mem should work |
| 01:50.45 | *** join/#htc-linux badlee (n=jake@75-17-156-100.lightspeed.prsdwi.sbcglobal.net) |
| 01:54.07 | maejrep | :x |
| 01:58.10 | NetRipper | yay |
| 01:58.12 | NetRipper | stupid me |
| 01:58.13 | NetRipper | :) |
| 01:58.24 | NetRipper | 20000000 was meant to be hex |
| 01:58.37 | NetRipper | but obviously dd thought it was decimal |
| 02:02.16 | NetRipper | # dd if=/dev/mem of=/mmc/memdump.bin ibs=1M obs=1M skip=512 count=128 |
| 02:02.16 | NetRipper | 128+0 records in |
| 02:02.16 | NetRipper | 128+0 records out |
| 02:02.19 | NetRipper | thats better |
| 02:10.32 | *** join/#htc-linux dzo_ (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 02:13.45 | NetRipper | i suppose its bedtime |
| 02:13.54 | NetRipper | good night |
| 02:20.22 | *** join/#htc-linux br1ck_ (n=br1ck@xdslct222.osnanet.de) |
| 02:31.24 | maejrep | you're not going to share how you did it? :p |
| 02:34.41 | *** join/#htc-linux miknix (n=miknix@gentoo/developer/miknix) |
| 02:34.42 | *** join/#htc-linux BHSPitMonkey (n=stephen@unaffiliated/bhspitmonkey) |
| 02:39.58 | *** join/#htc-linux PoohbaLT (n=BlkPoohb@c-69-141-71-249.hsd1.nj.comcast.net) |
| 02:41.19 | *** join/#htc-linux venny_ (i=Travis@h216-45-127-2.dynamic.platinum.ca) |
| 02:50.36 | *** join/#htc-linux Kuma (n=John@g227181088.adsl.alicedsl.de) |
| 03:01.43 | *** join/#htc-linux miknix (n=miknix@gentoo/developer/miknix) |
| 03:18.29 | *** join/#htc-linux Kevin2 (n=Kevin2@207-237-194-161.c3-0.avec-ubr2.nyr-avec.ny.cable.rcn.com) |
| 03:30.04 | *** join/#htc-linux milfadoodle (n=milfadoo@78-69-144-82-no19.tbcn.telia.com) |
| 03:53.09 | *** join/#htc-linux venny (i=Travis@h216-45-127-2.dynamic.platinum.ca) |
| 04:07.48 | *** join/#htc-linux venny (i=Travis@h216-45-127-2.dynamic.platinum.ca) |
| 04:13.00 | *** join/#htc-linux venny (i=Travis@h216-45-127-2.dynamic.platinum.ca) |
| 04:15.37 | *** join/#htc-linux dcordes (n=dcordes@unaffiliated/dcordes) |
| 05:10.00 | *** join/#htc-linux venny (i=Travis@h216-45-127-2.dynamic.platinum.ca) |
| 05:13.20 | *** join/#htc-linux Venny (i=Travis@h216-45-127-2.dynamic.platinum.ca) |
| 05:23.45 | *** join/#htc-linux PoohbaLT (n=BlkPoohb@c-69-141-71-249.hsd1.nj.comcast.net) |
| 05:24.00 | *** join/#htc-linux goxboxlive (n=goxboxli@mail2.hjellnesconsult.no) |
| 05:33.34 | *** join/#htc-linux Venny (i=Travis@h216-45-127-2.dynamic.platinum.ca) |
| 05:53.37 | *** join/#htc-linux Venny (i=Travis@h216-45-127-2.dynamic.platinum.ca) |
| 06:24.17 | *** join/#htc-linux timebomb (n=tb@e176111037.adsl.alicedsl.de) |
| 06:41.59 | *** join/#htc-linux lpotter (n=ljp@58.173.176.153) |
| 07:02.00 | *** join/#htc-linux kiozen (n=oeichler@p549226DA.dip0.t-ipconnect.de) |
| 07:04.16 | *** join/#htc-linux imfloflo (n=imfloflo@cap31-6-88-180-73-121.fbx.proxad.net) |
| 07:05.23 | *** join/#htc-linux pleemans (n=toi@116.54-246-81.adsl-static.isp.belgacom.be) |
| 07:23.27 | *** join/#htc-linux liba2k (n=liba2k@194.90.149.193) |
| 07:27.38 | *** join/#htc-linux rmoravcik (n=rmoravci@gtsgw.ttc.cz) |
| 07:38.26 | *** join/#htc-linux ewasx (n=Armin@armin-dev.ict.tno.nl) |
| 08:10.36 | *** join/#htc-linux dzo (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 08:10.40 | *** join/#htc-linux ykut_johny (n=ykut_joh@op.niser.org.my) |
| 08:16.18 | *** join/#htc-linux BabelO (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
| 08:17.09 | *** join/#htc-linux nebi (n=nebi@170.ftth2.cust.fyrobs1.upps.se.borderlight.net) |
| 08:23.58 | *** join/#htc-linux Sti_0239 (n=Where_is@57.213-65-87.adsl-dyn.isp.belgacom.be) |
| 08:34.47 | *** join/#htc-linux opennandra (n=opennand@81.89.59.170) |
| 08:50.56 | *** join/#htc-linux timebomb (n=tb@e176111037.adsl.alicedsl.de) |
| 09:00.36 | *** join/#htc-linux dzo_ (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 09:16.03 | *** join/#htc-linux bs2 (n=kra@87.72.13.87) |
| 09:21.32 | *** join/#htc-linux marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 10:10.19 | *** join/#htc-linux Pure4Real (n=pure4rea@89-97-140-219.ip17.fastwebnet.it) |
| 10:30.01 | *** join/#htc-linux zycho (n=zycho@a89-183-76-201.net-htp.de) |
| 11:00.07 | *** join/#htc-linux myxor (n=myxor@pdbn-4d0894fb.pool.mediaWays.net) |
| 11:02.11 | *** join/#htc-linux maejrep (n=madcoder@c-71-225-238-170.hsd1.pa.comcast.net) |
| 11:08.10 | *** join/#htc-linux asj_xda (n=asj@130.78.broadband3.iol.cz) |
| 11:08.19 | asj_xda | hi |
| 11:28.04 | Pure4Real | hi |
| 11:28.34 | *** join/#htc-linux dzo_ (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 11:28.59 | Pure4Real | asj_xda: did the automated build work? it should've built a new kernel last night |
| 11:31.57 | *** join/#htc-linux maejrep (n=madcoder@c-71-225-238-170.hsd1.pa.comcast.net) |
| 11:39.16 | *** join/#htc-linux myxor (n=myxor@pdbn-4d0894fb.pool.mediaWays.net) |
| 11:43.19 | *** join/#htc-linux bs2 (n=kra@87.72.13.87) |
| 11:49.22 | *** join/#htc-linux MrFeetio (n=MrFeetio@pool-98-117-23-186.hrbgpa.fios.verizon.net) |
| 11:59.46 | *** part/#htc-linux bs2 (n=kra@87.72.13.87) |
| 12:02.14 | *** join/#htc-linux Mullins (n=bw@89.204.248.45) |
| 12:03.57 | *** join/#htc-linux asj_xda (n=asj@130.78.broadband3.iol.cz) |
| 12:07.39 | *** join/#htc-linux ali1234 (n=al@robotfuzz.co.uk) |
| 12:26.18 | *** join/#htc-linux pleemans (n=toi@116.54-246-81.adsl-static.isp.belgacom.be) |
| 13:06.23 | *** join/#htc-linux Stskeepz (n=chobits@84.238.11.16) |
| 13:13.40 | *** join/#htc-linux dzo_ (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 13:15.39 | *** join/#htc-linux Stskeeps (n=chobits@84.238.11.16) |
| 13:20.53 | *** join/#htc-linux ClashTheBunny (i=c72ec6e8@gateway/web/ajax/mibbit.com/x-79fc816ce9f6fd90) |
| 13:24.31 | *** join/#htc-linux rm___ (n=rm@fsf/member/rm) |
| 14:08.53 | NetRipper | maejrep, it's not stable yet.. it freezes when booting android.. the moment it clears the screen and tries to display the android logo |
| 14:09.10 | NetRipper | i want to cross compile 'memtester |
| 14:09.12 | NetRipper | but dont know how |
| 14:09.23 | NetRipper | or if the tool supports it |
| 14:09.23 | NetRipper | ;) |
| 14:16.54 | *** join/#htc-linux Pure4Real (n=pure4rea@89-97-140-219.ip17.fastwebnet.it) |
| 14:19.41 | NetRipper | dcordes, are you here? |
| 14:20.38 | asj_xda | NetRipper hi, |
| 14:21.53 | asj_xda | can you please do me a favor? |
| 14:22.22 | NetRipper | asj_xda, you're free to ask |
| 14:23.15 | asj_xda | just an easy task, my ISP changed my IP, so I just need to check if the DNS was updated correctly and domain ace-com.cz is reachable |
| 14:23.37 | NetRipper | netripper@phoenix:~$ host ace-com.cz |
| 14:23.37 | NetRipper | Host ace-com.cz not found: 2(SERVFAIL) |
| 14:23.38 | NetRipper | not yet |
| 14:23.42 | asj_xda | I have there autoBilds for Kaiser Android kernel after each midnight |
| 14:23.45 | NetRipper | where is it hosted? |
| 14:23.49 | asj_xda | if GIT is updated |
| 14:24.00 | asj_xda | I have it here, on my own server |
| 14:24.01 | NetRipper | ah nice |
| 14:24.10 | asj_xda | DNS seems to be running OK |
| 14:24.29 | asj_xda | perhaps just takes a while to flush the caches and promote new IP :( |
| 14:24.42 | NetRipper | nserver: sns.tvtrinec.cz |
| 14:24.42 | NetRipper | nserver: ns1.ace-com.cz |
| 14:24.46 | NetRipper | there are two nameservers |
| 14:24.48 | NetRipper | for that domain |
| 14:25.05 | asj_xda | yes, ns1.ace-com.cz is my own server |
| 14:25.31 | NetRipper | it'll first attempt sns.tvtrinec.cz |
| 14:25.32 | asj_xda | the second one is from my colleague, but it seems that is still holds old IP |
| 14:25.37 | NetRipper | but that dns server seems correct too |
| 14:26.13 | asj_xda | I would like to force it to update, but it is not my machine |
| 14:26.28 | asj_xda | anyway it says that's not authoritative answer |
| 14:26.31 | asj_xda | for me |
| 14:26.35 | asj_xda | if I dig |
| 14:27.01 | asj_xda | but then says that authoritative answer is correct IP here, but I am inside my own network |
| 14:27.55 | asj_xda | waht you get on dig? |
| 14:28.12 | NetRipper | non responsive dns @ 85.70.78.130 |
| 14:28.30 | NetRipper | there is some recursion in your domain too |
| 14:28.32 | NetRipper | its weird |
| 14:28.34 | asj_xda | the IP is correct... :( |
| 14:29.05 | asj_xda | it is allways hell having DNS server over NAT router :( |
| 14:29.11 | NetRipper | netripper@phoenix:~$ dig ace-com.cz @85.70.78.130 |
| 14:29.11 | NetRipper | ; <<>> DiG 9.5.0-P2 <<>> ace-com.cz @85.70.78.130 |
| 14:29.11 | NetRipper | ;; global options: printcmd |
| 14:29.11 | NetRipper | ;; connection timed out; no servers could be reached |
| 14:29.18 | asj_xda | but it was working nice before IP change |
| 14:29.19 | NetRipper | make sure to forward both tcp and udp 53 |
| 14:29.26 | NetRipper | how long has the ip change been? |
| 14:29.35 | NetRipper | and since you updated dns servers |
| 14:29.36 | asj_xda | since saturday |
| 14:31.37 | asj_xda | well I just need android.ace-com.cz/kernel/ to be reachable now... hmmms.. I'll have to check it again.. it seems to be OK on my side, no strange logs in syslog, router shows redirect on port 53 on each request... |
| 14:31.50 | asj_xda | perhaps I'll try to reboot the server too |
| 14:31.55 | NetRipper | i cant reach your dns server |
| 14:32.00 | NetRipper | 85.70.78.130 |
| 14:32.02 | NetRipper | times out |
| 14:32.18 | asj_xda | but I do not have idea why.. can you ping it? |
| 14:32.25 | NetRipper | no |
| 14:32.33 | NetRipper | no response |
| 14:32.45 | NetRipper | but ping is usually disabled on routers |
| 14:32.48 | NetRipper | (icmp) |
| 14:32.56 | NetRipper | make sure your internal ips havent changed ;) |
| 14:33.01 | NetRipper | i.e.f orwarding to wrong internal address |
| 14:33.03 | asj_xda | what is your IP? I'll take a look in the logs |
| 14:33.08 | NetRipper | netripper.nl |
| 14:33.24 | NetRipper | 82.95.194.99 |
| 14:34.01 | asj_xda | IC¨ |
| 14:34.50 | Pure4Real | w00h00, dutch |
| 14:34.50 | Pure4Real | hehe, hoi ;) |
| 14:34.50 | asj_xda | strange, I do not have any access in the log from that IP |
| 14:34.52 | asj_xda | Pure4Real: Hi |
| 14:35.07 | NetRipper | ;) |
| 14:37.07 | asj_xda | althou I see lo of requests for port 53 |
| 14:37.20 | asj_xda | perhaps it is still trying to promote new IP |
| 14:37.27 | *** join/#htc-linux ykut_johny (n=ykut_joh@mitsa.org.my) |
| 14:39.26 | asj_xda | perhaps I should try to log all the events on bind |
| 14:39.40 | asj_xda | to check if it works as it should |
| 14:40.45 | asj_xda | I'll reboot the server also... give me a second... |
| 14:42.50 | Pure4Real | asj_xda: did the automated build make a new kernel last night? |
| 14:43.21 | asj_xda | yes |
| 14:43.26 | asj_xda | I have it there |
| 14:43.28 | Pure4Real | ok, cool |
| 14:43.38 | Pure4Real | good to hear it works as it should |
| 14:43.40 | asj_xda | but it still seems that the DNS is not flushed |
| 14:43.45 | asj_xda | :( |
| 14:44.00 | asj_xda | now I am rebooting the server to see if it does anything |
| 14:44.04 | tmzt | you set the serial numbers/ttl? |
| 14:44.11 | Pure4Real | hmm, maybe it's easier to put the files on a other server, also to save your own bandwith |
| 14:44.42 | asj_xda | well if I would have access to FTP than I can automate the uplad somewhere :) |
| 14:45.07 | asj_xda | yes, Serial was changed to reflect latest changes |
| 14:45.10 | Pure4Real | i'll look into that |
| 14:45.40 | *** join/#htc-linux bs2 (n=kra@87.72.13.87) |
| 14:45.53 | asj_xda | Pure4Real: At last we would have automated mirroring :D |
| 14:54.54 | *** join/#htc-linux asj_xda_ (n=asj@130.78.broadband3.iol.cz) |
| 14:55.05 | NetRipper | still timeout |
| 14:55.34 | asj_xda_ | mmnt, I am checking configuration |
| 14:56.49 | *** join/#htc-linux pleemans (n=toi@116.54-246-81.adsl-static.isp.belgacom.be) |
| 15:00.13 | asj_xda_ | ok, what about nslookup now? |
| 15:00.35 | asj_xda_ | when I query through 4.2.2.2 it seems to get the right answer |
| 15:00.50 | NetRipper | netripper@eagle:~$ host ace-com.cz 85.70.78.130 |
| 15:00.50 | NetRipper | ;; connection timed out; no servers could be reached |
| 15:00.51 | NetRipper | same |
| 15:01.28 | asj_xda_ | Server: 4.2.2.2 Address: 4.2.2.2#53 Non-authoritative answer: Name: ace-com.cz Address: 85.70.78.130 |
| 15:02.49 | asj_xda_ | 7 01/23/2009 02:20:42 Firewall rule match: UDP (W to L, rule:1) 82.95.194.99:59232 10.0.0.3:53 ACCESS FORWARD |
| 15:03.02 | asj_xda_ | NetRipper is it your IP? |
| 15:03.43 | NetRipper | yes |
| 15:03.54 | asj_xda_ | ok, that is what I see on router |
| 15:04.05 | asj_xda_ | I'll check shorewall on the server... mmnt |
| 15:04.14 | asj_xda_ | maybe there is something fucked up :D |
| 15:04.57 | NetRipper | hm |
| 15:04.58 | NetRipper | tcp works |
| 15:04.59 | NetRipper | udp doesnt |
| 15:05.08 | NetRipper | your dns server isn't listening on udp? |
| 15:05.49 | asj_xda_ | both are forwarded to the server |
| 15:06.11 | NetRipper | yes your dns server may not be listening on udp |
| 15:06.39 | asj_xda_ | root@ns1:~# nslookup > server 82.95.194.99 Default server: 82.95.194.99 Address: 82.95.194.99#53 > ace-com.cz ;; connection timed out; no servers could be reached > |
| 15:07.07 | asj_xda_ | OK, I'll take a look... gee it was working few days ago |
| 15:07.18 | asj_xda_ | damn ISP changed my IP |
| 15:07.47 | Pure4Real | asj_xda_: i've set up a free hosting for the files |
| 15:08.02 | Pure4Real | i'll give you the additions to the script when i come back from coffee |
| 15:08.18 | asj_xda_ | ok |
| 15:11.38 | *** join/#htc-linux sdt555 (n=titus@147.145.40.44) |
| 15:15.31 | asj_xda_ | NetRipper: Well maybe it will really take some time to update all the DNS, but it is really strange, cause there is only record for the domain in the ROOT DNS for CZ domain with IP to my server.. and then my server responding... but it seems like sometimes it can not hadle the request in time... |
| 15:16.50 | dcordes | asj_xda_: hi |
| 15:17.01 | asj_xda_ | dcordes: hi |
| 15:17.51 | dcordes | NetRipper: I'm here for a few minutes |
| 15:18.27 | dcordes | asj_xda_: did you try a different radio rom? |
| 15:18.39 | asj_xda_ | NetRipper: Can you check your log to see what it says? |
| 15:18.49 | asj_xda_ | dcordes: yes, 1.65 and 1.71 |
| 15:19.00 | dcordes | and what's the exact problem again? |
| 15:19.01 | asj_xda_ | both with the same result :( |
| 15:19.18 | asj_xda_ | it is only after powersave |
| 15:19.29 | asj_xda_ | the screen goes to color stripes |
| 15:19.42 | asj_xda_ | but android is still running well |
| 15:19.50 | asj_xda_ | but no way to use it this way |
| 15:20.47 | dcordes | so when your kaiser is supposed to power off the display, it shows color stripes instead? can you make some screenshot? |
| 15:21.49 | asj_xda_ | dcordes: well no.. it dimms the display OK, then if I wake it up before red LED light it is OK, after red LED the screen is messed up |
| 15:23.18 | dcordes | so it's the resume |
| 15:23.27 | dcordes | there is a similar problem with the blueangel board id 6 mddi |
| 15:23.28 | asj_xda_ | yes |
| 15:23.54 | asj_xda_ | would you guess the HW is slightli different from others? :( |
| 15:23.58 | asj_xda_ | hope not :D |
| 15:24.00 | dcordes | yes the mddi |
| 15:24.03 | tmzt | dcordes: mddi? |
| 15:24.12 | dcordes | not? |
| 15:24.18 | *** join/#htc-linux newb (n=home@124.123.89.6) |
| 15:24.19 | asj_xda_ | well... |
| 15:24.24 | tmzt | blue angel wouldn't have mddi |
| 15:24.40 | asj_xda_ | when I was going to flash my first rom the alocation was different |
| 15:25.10 | *** part/#htc-linux sdt555 (n=titus@147.145.40.44) |
| 15:25.23 | asj_xda_ | but now I have hyperdragons IV so the allocation should be the same like others, or am I missing something? |
| 15:25.31 | *** part/#htc-linux newb (n=home@124.123.89.6) |
| 15:26.35 | asj_xda_ | dcordes: What should I do to see if there is any difference? |
| 15:27.11 | asj_xda_ | would you guess that this can be the reason why custom ROMs intend to hang for few seconds every now and then? |
| 15:27.29 | dcordes | probably I'm not sure how you can find it out |
| 15:27.54 | dcordes | the mechanism that detects the mddi must be somewhere in drivers/video/msm/ |
| 15:28.25 | dcordes | asj_xda_: does dzo know about the problem? |
| 15:29.09 | asj_xda_ | NetRipper: It seems that lot of different servers like google, TPnet etc. tries to access the DNS, maybe it is still updating caches over the world... |
| 15:29.24 | asj_xda_ | dcordes: I told him yesterday, but he was really surprised |
| 15:29.47 | dcordes | you must have a different panel or anything |
| 15:30.40 | asj_xda_ | dcordes: but it does that only after the PS was implemented... before that it was OK... and also the front panel keys does not dimm.. |
| 15:30.47 | asj_xda_ | they are still on |
| 15:37.51 | *** join/#htc-linux myxor (n=myxor@pdbn-4d0894fb.pool.mediaWays.net) |
| 15:43.12 | NetRipper | dcordes, can you build memtester for angstrom? |
| 15:43.50 | *** join/#htc-linux Arto (n=AstainHe@206.71.78.158) |
| 15:43.51 | NetRipper | or can you tell me how to use the package manager? (if thats possible) |
| 15:44.25 | tmzt | NetRipper: memtester? |
| 15:44.32 | NetRipper | tmzt, yes |
| 15:44.47 | NetRipper | a userspace memory tester |
| 15:44.51 | tmzt | is that the same as the pc program? not sure what you are referring to |
| 15:44.53 | tmzt | oh |
| 15:44.58 | tmzt | how does it work? |
| 15:45.10 | NetRipper | it allocates memory to see if it can read/write it |
| 15:45.32 | NetRipper | asj_xda_, dns still doesnt work via udp.. the tcp does work |
| 15:45.40 | tmzt | so you are trying to see if you can map parts of internal sdram? |
| 15:46.18 | NetRipper | tmzt, i have configured the second memory bank on the raphael in the linux kernel.. but am having errors when booting android.. i think there may be a part of the memory that is still MPU locked |
| 15:46.41 | tmzt | ah |
| 15:46.49 | tmzt | only with android? |
| 15:46.54 | NetRipper | two ways to find out: 1) disassemble oemsbl, which i hope cr2 is still looking at.. and 2) simply write to the memory and read it, and see if its set |
| 15:47.06 | NetRipper | i dont have an X image to test |
| 15:47.27 | NetRipper | but it hangs the moment android tries to show its 'loading' screen (the logo) |
| 15:48.45 | tmzt | that's using the libhgl hw3d library, it probably doesn't like you to change the size of it's aperature |
| 15:49.25 | NetRipper | aperature? |
| 15:49.36 | NetRipper | GPU0 and GPU1 still have 8MB reserved, like it had |
| 15:50.30 | tmzt | did the physical addresses change? |
| 15:50.49 | NetRipper | yes, but it did before |
| 15:54.59 | NetRipper | i'll try changing it back tonight, to see if it makes a difference |
| 15:55.26 | NetRipper | if it does, it means there's another part of the area mpu locked |
| 15:55.28 | NetRipper | annoying stuff |
| 15:55.36 | dcordes | NetRipper: opkg update; opkg list | grep memtester |
| 15:55.51 | NetRipper | dcordes, and to install? |
| 15:56.17 | dcordes | opkg install |
| 15:56.27 | NetRipper | ok |
| 15:58.16 | dcordes | http://angstrom-distribution.org/repo |
| 15:58.39 | NetRipper | which arch should i have? armv4t? |
| 16:00.15 | NetRipper | still using your kaiser/raphael anstrom |
| 16:08.14 | *** join/#htc-linux GPFerror (n=gpferror@cpe-76-187-41-132.tx.res.rr.com) |
| 16:15.06 | *** join/#htc-linux MethoS (n=lem@host-091-097-244-059.ewe-ip-backbone.de) |
| 16:23.29 | *** join/#htc-linux Othello (i=Othello@gateway/tor/x-6966e8dfe61d09af) |
| 16:30.02 | *** join/#htc-linux mib_tnewck (i=55b56627@gateway/web/ajax/mibbit.com/x-77ede67775732be7) |
| 16:31.37 | exco_mibbit | dzo, your kernels don't run on Polaris, yet? |
| 16:36.11 | *** join/#htc-linux Zinbolic (n=zinbolic@84.238.80.215) |
| 16:37.41 | *** join/#htc-linux metter (n=metter@11-49.0-85.cust.bluewin.ch) |
| 16:39.48 | *** join/#htc-linux marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 16:45.21 | *** join/#htc-linux asj_xda (n=asj@130.78.broadband3.iol.cz) |
| 16:45.57 | asj_xda | NetRipper: Please can you try it now? Maybe the server was confused by being not able to resolv the adress as localhost... |
| 16:46.24 | asj_xda | it is not funny to try this kind of setup being over NAT :( |
| 16:46.30 | asj_xda | confusing a bit :D |
| 16:47.12 | asj_xda | I had to force the query over external DNS server |
| 16:47.19 | asj_xda | can you please check that for me? |
| 16:47.34 | Pure4Real | asj_xda: did you get my email? |
| 16:47.52 | asj_xda | Pure4Real: Yes, I am gonna to add it to the server now |
| 16:47.57 | Pure4Real | k |
| 16:50.57 | asj_xda | BTW: I am looking at that script, are you sure you are trying to copy right file? :D |
| 16:51.55 | asj_xda | ah... IC |
| 16:52.09 | asj_xda | you are going to copy only the latest version without dating it right? |
| 16:55.40 | *** join/#htc-linux Mullins (n=bw@89.204.248.45) |
| 16:57.56 | asj_xda | Pure4Real: I do not see zImage.gz file in source folder anyway... let mi take a look at that.. |
| 16:58.27 | Pure4Real | hm |
| 16:58.47 | asj_xda | Pure4Real: can you please try nslookup ace-com.cz ? |
| 16:59.03 | Pure4Real | sure |
| 16:59.50 | Pure4Real | ;; connection timed out; no servers could be reached |
| 17:00.31 | asj_xda | thats weird :( when I am requesting that via 4.2.2.2 which is external DNS server, I got right reply :( |
| 17:00.38 | asj_xda | geee :( |
| 17:05.27 | *** join/#htc-linux dzo (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 17:06.14 | Pure4Real | asj_xda: i sent you a new version of the script, this one should work |
| 17:12.12 | *** join/#htc-linux sleepr (n=sleepr@ip67.brfkatten.se) |
| 17:14.49 | sleepr | any progress on getting android to work on the raph100? |
| 17:18.27 | NetRipper | still no go asj_xda |
| 17:19.17 | asj_xda | NetRipper: thanx, I am possibly just missing something obvious... :) I'll dive in it a bit... |
| 17:20.19 | NetRipper | netstat -alnp | grep udp | grep 53 |
| 17:21.03 | NetRipper | make sure it's listening on 0.0.0.0:53 |
| 17:21.14 | NetRipper | or at least your network card's address port 53 |
| 17:21.25 | NetRipper | dinner, gtg |
| 17:22.32 | *** join/#htc-linux StarLite (n=nnscript@s55916ca6.adsl.wanadoo.nl) |
| 17:22.39 | asj_xda | sorry :D no multiline :D so it is just bit messed up... |
| 17:25.35 | *** join/#htc-linux dzo_ (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 17:29.00 | asj_xda | dzo: Hi |
| 17:30.14 | asj_xda | NetRipper: I am giving up for today, I am trying to call O2 to ask what's wrong, but it takes up to 30 minutes to reach the operator... what a wonderful service :D |
| 17:41.18 | ClashTheBunny | asj_xda ns1.ace-com.cz. 7200 IN A 81.200.49.16 |
| 17:41.32 | ClashTheBunny | could be part of the problem. |
| 17:42.05 | ClashTheBunny | when you ask the IP that you have in your registrar, it doesn't know that it is itself. |
| 17:42.45 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d87d029.pool.einsundeins.de) |
| 17:42.48 | asj_xda | ClashTheBunny: Well that is the old IP that is handled by secondary DNS, perhaps is not uptodate yet |
| 17:43.21 | asj_xda | ClashTheBunny: But that should be marked as non authoritative and there should be response from my server too... |
| 17:43.36 | asj_xda | that is strange, I have to call the admin of the sDNS to change it |
| 17:43.59 | ClashTheBunny | you have two servers listed: |
| 17:44.01 | ClashTheBunny | Name server sns.tvtrinec.cz Name server ns1.ace-com.cz 85.70.78.130 |
| 17:44.04 | *** join/#htc-linux sublemon (n=AndroidC@32.133.161.96) |
| 17:44.19 | asj_xda | ClashTheBunny: well ns1.ace-com.cz is the right one |
| 17:44.41 | ClashTheBunny | The first has no idea about your domain. The second, when asked "host -a ns1.ace-com.cz 85.70.78.130" gives the IP 81.200.49.16 |
| 17:44.58 | ClashTheBunny | so you may need to update that listing on your server also. |
| 17:47.47 | ClashTheBunny | A weird thing, that happened to me recently, was that my ISP was blocking a port, and it took a while to figure out that it didn't work because of that. You don't think your ISP all of a sudden started blocking DNS? |
| 17:48.33 | *** join/#htc-linux sublemon (n=sublemon@32.133.161.96) |
| 17:48.45 | ClashTheBunny | I see the same thing that NetRipper was seeing: TCP DNS works, UDP fails. |
| 17:49.19 | *** join/#htc-linux asj_xda_ (n=asj@130.78.broadband3.iol.cz) |
| 17:49.58 | sublemon | hey guys is ther a kaiser specific chan? |
| 18:09.33 | *** join/#htc-linux dzo_ (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 18:16.36 | NetRipper | asj_xda_, what do you mean? no multiline? |
| 18:17.07 | asj_xda_ | NetRipper: That what I sent was not parsed to lines :D but it was supressed to 1 line |
| 18:19.00 | NetRipper | i didnt even see 1 line |
| 18:19.01 | NetRipper | so |
| 18:19.01 | NetRipper | ;) |
| 18:23.16 | asj_xda_ | NetRipper: what you get on dig ace-com.cz ? |
| 18:23.43 | NetRipper | ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 47134 |
| 18:24.49 | asj_xda_ | strange, when I use nslookup server 4.2.2.2 query ace-com.cz I have right reply but it seems that is the only server that sees it :( |
| 18:27.12 | asj_xda_ | using server of my provider (o2.cz) also gives right reply |
| 18:27.33 | asj_xda_ | anything else seems to get timeouts |
| 18:28.58 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbfc189.pool.einsundeins.de) |
| 18:33.19 | asj_xda_ | who knows, maybe it just needs some time to flush all caches on other servers... |
| 18:33.32 | *** join/#htc-linux miknix (n=miknix@gentoo/developer/miknix) |
| 18:33.35 | *** join/#htc-linux dzo_ (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 18:34.56 | *** part/#htc-linux rm (n=rm@fsf/member/rm) |
| 18:39.11 | dcordes | NetRipper: no. for msm7* there is armv6-novp in OE |
| 18:39.21 | NetRipper | what is novp? |
| 18:39.38 | dcordes | s/novp/novfp/ |
| 18:39.41 | dcordes | floating point |
| 18:39.45 | NetRipper | ok |
| 18:40.07 | *** join/#htc-linux pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 18:42.04 | *** join/#htc-linux marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 18:46.13 | *** join/#htc-linux Untouchab1e (n=Untoucha@82.147.51.146) |
| 18:46.16 | Untouchab1e | Good evening all |
| 18:47.37 | asj_xda_ | CU now.. I'll come back later |
| 18:47.39 | lupine_85 | evening |
| 18:47.40 | *** part/#htc-linux asj_xda_ (n=asj@130.78.broadband3.iol.cz) |
| 18:47.41 | lupine_85 | oooh |
| 18:47.51 | lupine_85 | I've missed a lot of commits |
| 18:48.15 | Untouchab1e | :) |
| 18:48.35 | Untouchab1e | What is this about msmdcc_id being dropped because MTYPE can identify the device alone? |
| 18:50.09 | *** join/#htc-linux tcccp (i=hey@ballbreaker.hey-ix.net) |
| 18:52.47 | NetRipper | Untouchab1e, there are 4 mtypes that are supported now.. raph100/raph800/diam100/diam800 |
| 18:53.29 | NetRipper | raph100/diam100 both use msmsdcc_id=2 (and have wifi on 1)... and raph800/diam800 both use msmsdcc_id=3 (and have wifi also on 1) |
| 18:54.05 | NetRipper | msmsdcc_id override has been removed as wifi also uses sdcc.. ;) |
| 18:54.21 | NetRipper | and it was no longer neccesary as we have the new mtypes |
| 18:54.26 | Untouchab1e | Ah ok |
| 18:54.39 | Untouchab1e | As I Know the Raph110 (Fuze?) uses msmsdcc_id = 3 |
| 18:55.32 | NetRipper | was the fuze also the devices with less memory? |
| 18:55.45 | Untouchab1e | No idea :) |
| 18:55.54 | NetRipper | is it a cdma device? |
| 18:55.56 | NetRipper | or gsm |
| 18:56.00 | Untouchab1e | CDMA I believe |
| 18:56.03 | NetRipper | ah good |
| 18:56.12 | NetRipper | so it should use the cDMA mtype anyway |
| 18:56.15 | *** join/#htc-linux infernixx (n=nix@unaffiliated/infernix) |
| 18:56.23 | NetRipper | http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=commit;h=67654de7d2fb753cce73334196404d4cc092be24 |
| 18:56.29 | NetRipper | see last 4 lines |
| 18:57.41 | AstainHellbring | NetRipper fuze has same specs as raph100 just w.o front cam and different keyboard layout |
| 18:57.48 | AstainHellbring | fuze raph110 is gsm |
| 18:57.55 | NetRipper | aw |
| 18:58.07 | NetRipper | its the black sheep |
| 18:59.52 | NetRipper | hm thats rather unfortunate |
| 19:01.28 | NetRipper | anyone with a fuze here? |
| 19:01.33 | *** join/#htc-linux dzo_ (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 19:01.54 | NetRipper | now i want to be sure whether its msmsdcc_id=3 or 2 |
| 19:02.02 | Untouchab1e | lol |
| 19:02.22 | Untouchab1e | Have you made any breakthroughs lately NetRipper? :) |
| 19:02.35 | NetRipper | read git :p |
| 19:03.16 | Untouchab1e | :P |
| 19:03.42 | Untouchab1e | hmm |
| 19:03.57 | Untouchab1e | So, its not time for any new Android packages just yet I guess |
| 19:04.25 | NetRipper | not on the .27 kernel |
| 19:04.41 | NetRipper | navi and touchscreen are not working in android atm |
| 19:04.44 | Untouchab1e | ah |
| 19:04.51 | Untouchab1e | Do we know how to get it working? |
| 19:04.54 | NetRipper | i dont |
| 19:05.02 | Untouchab1e | ah.. |
| 19:05.07 | Untouchab1e | cant we stick to .26 though? :) |
| 19:05.17 | NetRipper | .25 you mean |
| 19:05.31 | NetRipper | yes we could, but we've done really a lot of work in .27 already |
| 19:05.40 | Untouchab1e | yeah, .25 ofc (Which is what my ADP1 runs) |
| 19:06.04 | Untouchab1e | yeah, I perfectly understand that.. STill, what are the advantages of going .27 instead of .25? |
| 19:06.16 | NetRipper | being able to use the 2nd memory bank |
| 19:06.28 | Untouchab1e | oh |
| 19:06.37 | NetRipper | although im running into issues there to ;) |
| 19:06.46 | NetRipper | its what im currently working on |
| 19:06.51 | Untouchab1e | aha |
| 19:06.57 | Untouchab1e | did you get the WiFi driver working? |
| 19:06.59 | NetRipper | the bank is working, but android hangs |
| 19:07.06 | NetRipper | yes and no |
| 19:07.13 | Untouchab1e | hehe |
| 19:07.15 | NetRipper | driver loads.. |
| 19:07.24 | NetRipper | but im not working on that |
| 19:07.37 | *** join/#htc-linux opennandra (n=opennand@afrodita.advanet.sk) |
| 19:07.38 | NetRipper | i think wifi is low prio |
| 19:07.51 | NetRipper | but would be neat nonetheless |
| 19:10.10 | Untouchab1e | heh, Yeah |
| 19:10.17 | Untouchab1e | at least you seem to be pretty close |
| 19:10.33 | Untouchab1e | so once we get to the point where WiFi is something we wanna work on, Its basically nailed :) |
| 19:11.11 | NetRipper | swears at elite rc3 some more |
| 19:11.57 | NetRipper | it's a real nice rom but i hate the startup problem |
| 19:12.16 | AstainHellbring | swears at TF3d |
| 19:12.27 | NetRipper | yea, blame tf3d |
| 19:12.31 | NetRipper | no other roms have this issue:P |
| 19:12.45 | AstainHellbring | I've had the issue on other roms myself though |
| 19:12.58 | NetRipper | aha |
| 19:13.08 | AstainHellbring | aha? |
| 19:13.12 | AstainHellbring | even stock |
| 19:13.20 | NetRipper | i've only had it with elite so far |
| 19:13.23 | NetRipper | and i reboot pretty often |
| 19:13.29 | NetRipper | have only tried about 4 roms though |
| 19:13.37 | *** join/#htc-linux cr2 (n=cr2@ip-77-25-69-190.web.vodafone.de) |
| 19:14.01 | NetRipper | romeos, elite, and two others |
| 19:14.01 | NetRipper | ;p |
| 19:14.04 | NetRipper | which i dont remember |
| 19:15.04 | dcordes | cr2: hi. what's up? |
| 19:15.20 | *** join/#htc-linux patoche (n=toto@lns-bzn-44-82-249-226-149.adsl.proxad.net) |
| 19:15.48 | *** join/#htc-linux Beef (n=beef@modemcable173.233-37-24.mc.videotron.ca) |
| 19:21.17 | cr2 | dcordes: nothing interesting. need to work a lot :) |
| 19:22.02 | cr2 | dcordes: can't find my bt headset. it disappeared like the wired headset ;) |
| 19:22.21 | *** join/#htc-linux Beef (n=beef@modemcable173.233-37-24.mc.videotron.ca) |
| 19:23.12 | cr2 | if somebody has raph110, please dump the spl |
| 19:24.53 | cr2 | NetRipper: what angstromramdisk should be used for linload.exe ? |
| 19:25.24 | NetRipper | emm |
| 19:25.28 | NetRipper | you can use the one on my site |
| 19:25.46 | NetRipper | http://netripper.com/raphael/20081204-01_raph_diam_angstrom_usb/ |
| 19:26.46 | cr2 | ok. what about the command line ? |
| 19:27.05 | NetRipper | er |
| 19:27.22 | cr2 | tmzt: are you here ? |
| 19:27.32 | NetRipper | ./make-bootbundle.py |
| 19:27.34 | NetRipper | it'll tell you |
| 19:27.34 | NetRipper | ;) |
| 19:28.01 | NetRipper | <script> is the default.txt, make sure it has ramboot at the end, not 'boot' |
| 19:28.52 | cr2 | yes, but the kernel command line |
| 19:29.00 | NetRipper | erm |
| 19:29.03 | cr2 | ram= ... |
| 19:29.09 | NetRipper | root@htcraphael:~# cat /proc/cmdline |
| 19:29.10 | NetRipper | msmts_calib=0x6D.0x5D.0x340.0x375 msmvkeyb_toggle=hide lpj=2637824 |
| 19:29.18 | NetRipper | use ram=76M to be safe |
| 19:29.21 | NetRipper | uh |
| 19:29.23 | NetRipper | mem=76M |
| 19:29.24 | NetRipper | i mean |
| 19:29.36 | cr2 | ok |
| 19:35.12 | NetRipper | hm think i should disable the kernels out-of-memory killer |
| 19:35.15 | NetRipper | :) |
| 19:35.33 | cr2 | lol |
| 19:35.34 | NetRipper | currently testing 150MB of memory, without issues so far |
| 19:35.44 | cr2 | you can swap to the 8GB card |
| 19:35.56 | NetRipper | yea but i dont want it to test my memory card |
| 19:36.09 | NetRipper | but i'll try |
| 19:36.22 | cr2 | lol |
| 19:36.48 | cr2 | you use java, so 266MB is not enough ? |
| 19:37.12 | NetRipper | im not getting 266 mb with our memory layout |
| 19:37.13 | NetRipper | ;) |
| 19:37.35 | cr2 | how much do you lose ? |
| 19:37.46 | NetRipper | i have 200mb left |
| 19:37.48 | NetRipper | 206 |
| 19:37.56 | NetRipper | root@htcraphael:~# cat /proc/meminfo |
| 19:37.56 | NetRipper | MemTotal: 217088 kB |
| 19:37.57 | NetRipper | MemFree: 180056 kB |
| 19:37.59 | NetRipper | 217 even |
| 19:38.13 | cr2 | ok |
| 19:38.15 | *** join/#htc-linux p3t3r__1 (n=peter@gate1.net-you.de) |
| 19:38.48 | cr2 | 128@20000000+8sram@0x100000+X ? |
| 19:39.07 | NetRipper | lol |
| 19:39.12 | NetRipper | its also testing swap now |
| 19:39.21 | NetRipper | the tool is not very intelligent |
| 19:39.30 | cr2 | ? |
| 19:39.45 | NetRipper | 89MB @ 0x1* + 128M @ 0x2* |
| 19:39.55 | cr2 | 89 ? |
| 19:39.57 | NetRipper | yes |
| 19:40.10 | NetRipper | i moved framebuffer back to main memory |
| 19:40.20 | cr2 | 16* was working for dma |
| 19:41.05 | cr2 | GPU0 and GPU1 is some android thing ? |
| 19:41.15 | NetRipper | GPU0 andGPU1 is the hw3d stuff |
| 19:41.33 | cr2 | does it work ? |
| 19:41.59 | NetRipper | dont know |
| 19:42.17 | *** join/#htc-linux radem205 (n=aaa@92-108-47-154.dynamic.upc.nl) |
| 19:42.30 | cr2 | ok, tell me about g1 androed |
| 19:42.58 | cr2 | what parts there are closet sourced ? |
| 19:43.08 | NetRipper | i dont know much about android |
| 19:43.18 | cr2 | some ril lib afair |
| 19:43.44 | cr2 | then something for the cam ? |
| 19:43.54 | cr2 | and this 3d thing. |
| 19:44.05 | NetRipper | sounds about right |
| 19:44.12 | cr2 | are there any non-gpl kernel modules ? |
| 19:44.17 | cr2 | sound ? tv out ? |
| 19:44.25 | NetRipper | i honestly dont know |
| 19:44.26 | NetRipper | :P |
| 19:44.37 | cr2 | where is tmzt when one needs him... |
| 19:45.47 | cr2 | dcordes: do you know something about androed ? |
| 19:46.11 | cr2 | but i think 3d from A will not work on nonA |
| 19:46.49 | cr2 | NetRipper: what do we know about uarts ? |
| 19:47.05 | NetRipper | not much, we dont have uarts working |
| 19:47.10 | NetRipper | maybe bluetooth when we try |
| 19:47.19 | cr2 | NetRipper: the uart1 is used for debugging, and is connected to the extusb via alt gpio 3d/3e |
| 19:47.39 | cr2 | uart2dm is used for bt |
| 19:48.06 | cr2 | hm. need clocks here too. |
| 19:48.56 | NetRipper | i gtg, training |
| 19:48.57 | NetRipper | bbl |
| 19:48.58 | NetRipper | :) |
| 19:49.43 | NetRipper | i think im also going to have less time for kernel hacking in the next (few) month(s) |
| 19:50.10 | NetRipper | depends if i can concentrate enough on my other work :P |
| 19:50.19 | NetRipper | ttyl |
| 19:52.01 | *** join/#htc-linux dzo_ (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 19:53.22 | dcordes | cr2: any interesting new Erdfernerkennungssysteme? |
| 19:53.54 | dcordes | cr2: I almost bought a 20⬠bt headset last weekend |
| 20:10.07 | *** join/#htc-linux dzo (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 20:11.17 | *** join/#htc-linux nebi (n=nebi@170.ftth2.cust.fyrobs1.upps.se.borderlight.net) |
| 20:11.18 | dcordes | cr2: don't know about other closed source parts in androed other than the ones you already mentioned |
| 20:15.47 | cr2 | dcordes: what is not working on kaiser ? |
| 20:16.06 | dcordes | usb bluetooth |
| 20:16.48 | dcordes | wifi |
| 20:17.02 | cr2 | ok |
| 20:17.11 | cr2 | AT@ICF=%u |
| 20:17.13 | cr2 | AT@HTCPDPFD=%u |
| 20:18.35 | dcordes | cr2: are those from kaiser atdbg? |
| 20:18.35 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) [NETSPLIT VICTIM] |
| 20:18.35 | cr2 | g1 uses strange command too |
| 20:19.02 | cr2 | no, from g |
| 20:19.21 | cr2 | Baseband Version: 62.33.20.08H_1.22.12.29 |
| 20:19.37 | cr2 | 6233 for the amss version ? |
| 20:19.47 | cr2 | what do we have ? |
| 20:20.39 | cr2 | wtf do they hardcode the operator list in the .so ?!? |
| 20:21.32 | cr2 | lol |
| 20:21.36 | cr2 | %s():clcc polling failed!! what is the bug?! |
| 20:24.26 | kiozen | dcordes: didn't you investigate for a quad copter some months ago? |
| 20:25.30 | *** join/#htc-linux TheOther (n=nahh@108.84-49-166.nextgentel.com) |
| 20:27.55 | dcordes | kiozen: yes and now I'm stuck with winged aerial vehicles |
| 20:28.17 | kiozen | ok |
| 20:29.34 | dcordes | kiozen: are you asking for any particular reason? |
| 20:30.40 | kiozen | well I just think about getting one, and thought you might have found something reasonable |
| 20:31.42 | dcordes | there is the mikrocopter which is very successful on the market |
| 20:34.24 | dcordes | s/mikrocopter/mikrokopter/ |
| 20:35.19 | *** join/#htc-linux StarLite (n=nnscript@s55916ca6.adsl.wanadoo.nl) |
| 20:35.57 | *** join/#htc-linux chab7 (n=kvirc@212.92.4.114) |
| 20:44.23 | *** join/#htc-linux infernixx (n=nix@unaffiliated/infernix) [NETSPLIT VICTIM] |
| 20:44.23 | *** join/#htc-linux GPFerror (n=gpferror@cpe-76-187-41-132.tx.res.rr.com) [NETSPLIT VICTIM] |
| 20:44.23 | *** join/#htc-linux liba2k (n=liba2k@194.90.149.193) [NETSPLIT VICTIM] |
| 20:44.24 | *** join/#htc-linux milfadoodle (n=milfadoo@78-69-144-82-no19.tbcn.telia.com) [NETSPLIT VICTIM] |
| 20:44.24 | *** join/#htc-linux DJWillis (i=djwillis@82-46-19-72.cable.ubr02.bath.blueyonder.co.uk) |
| 20:44.24 | *** join/#htc-linux Marajin_ (n=marajin@87-194-102-189.bethere.co.uk) [NETSPLIT VICTIM] |
| 20:44.24 | *** join/#htc-linux NetRipper (n=netrippe@netripper.nl) [NETSPLIT VICTIM] |
| 20:48.29 | *** join/#htc-linux dzo (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 20:50.31 | *** join/#htc-linux timebomb (n=tb@e176111037.adsl.alicedsl.de) |
| 20:52.06 | *** join/#htc-linux ClashTheBunny (i=c72ec6e7@gateway/web/ajax/mibbit.com/x-35637137a8283723) |
| 20:53.11 | *** join/#htc-linux DJWillis (i=djwillis@82-46-19-72.cable.ubr02.bath.blueyonder.co.uk) |
| 20:54.53 | *** join/#htc-linux DJWillis (i=djwillis@82-46-19-72.cable.ubr02.bath.blueyonder.co.uk) |
| 21:11.48 | *** join/#htc-linux DJWillis (i=djwillis@82-46-19-72.cable.ubr02.bath.blueyonder.co.uk) |
| 21:11.48 | *** join/#htc-linux infernixx (n=nix@unaffiliated/infernix) [NETSPLIT VICTIM] |
| 21:11.48 | *** join/#htc-linux GPFerror (n=gpferror@cpe-76-187-41-132.tx.res.rr.com) [NETSPLIT VICTIM] |
| 21:11.48 | *** join/#htc-linux liba2k (n=liba2k@194.90.149.193) [NETSPLIT VICTIM] |
| 21:11.49 | *** join/#htc-linux milfadoodle (n=milfadoo@78-69-144-82-no19.tbcn.telia.com) [NETSPLIT VICTIM] |
| 21:11.49 | *** join/#htc-linux Marajin_ (n=marajin@87-194-102-189.bethere.co.uk) [NETSPLIT VICTIM] |
| 21:11.49 | *** join/#htc-linux NetRipper (n=netrippe@netripper.nl) [NETSPLIT VICTIM] |
| 21:12.27 | *** join/#htc-linux dzo (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 21:14.14 | *** join/#htc-linux marmotta (n=skodde@unaffiliated/skodde) |
| 21:15.06 | *** join/#htc-linux milfadoodle (n=milfadoo@78-69-144-82-no19.tbcn.telia.com) |
| 21:19.05 | lupine_85 | :p |
| 21:21.49 | cr2 | lupine_85: do you have a bt headset ? |
| 21:22.00 | lupine_85 | cr2: yep, somewhere |
| 21:22.21 | cr2 | NetRipper: i've looked at 3D lib |
| 21:22.42 | cr2 | lupine_85: can you pair it, and let the sound play ? |
| 21:22.59 | cr2 | so the btpcm should be active |
| 21:23.07 | lupine_85 | erm, sure |
| 21:23.11 | cr2 | voice or whatever |
| 21:23.13 | lupine_85 | han gon while I hunt it out |
| 21:23.23 | cr2 | then i'd like to see the MSM_CLK dump |
| 21:23.28 | cr2 | ok |
| 21:25.03 | lupine_85 | right, it needs to charge, so how about you tell me how to do an MSM_CLK dump while it does so? :) |
| 21:25.08 | lupine_85 | then I can get a before and after |
| 21:25.45 | lupine_85 | is assuming it's a HaRET thing? |
| 21:27.31 | cr2 | in haret |
| 21:27.38 | cr2 | pd 0xa8600000 0x100 |
| 21:28.21 | lupine_85 | okidoki |
| 21:28.42 | lupine_85 | also, odd - my X is on a different VT to usual |
| 21:32.55 | *** join/#htc-linux Igorek (n=igorek@87.69.129.107) |
| 21:33.39 | lupine_85 | ok, got it |
| 21:34.23 | lupine_85 | cr2: http://rafb.net/p/92A0I742.html |
| 21:34.26 | *** join/#htc-linux dzo (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 21:34.50 | lupine_85 | do you just need it while audio is routed via the bluetooth, or while sound is actively happening? |
| 21:35.02 | NetRipper | 00:34:00 * kankurourou rips NetRipper |
| 21:35.08 | NetRipper | whoops |
| 21:35.08 | NetRipper | wrong button |
| 21:35.58 | NetRipper | cr2, any useful info from the 3e lib? |
| 21:35.58 | NetRipper | 3d |
| 21:36.26 | lupine_85 | http://rafb.net/p/7AOHWG30.html <-- audio coming out of the bt headset |
| 21:36.42 | lama | http://googlemobile.blogspot.com/2009/02/google-sync-beta-for-iphone-winmo-and.html |
| 21:37.38 | lupine_85 | (RAPH100, in case that makes much of a difference) |
| 21:39.38 | cr2 | lupine_85: while bt voice is active |
| 21:40.35 | NetRipper | lama, nice |
| 21:41.22 | cr2 | hmm. 38 and 3c are silent |
| 21:42.36 | cr2 | but 34 is different |
| 21:44.10 | cr2 | 88 changes |
| 21:45.15 | lupine_85 | cr2: part 2 of dump 1 is the device paired and audio routed to bt, but no sound. the second dump is while audio is playing through the headset from WMP |
| 21:45.59 | cr2 | lupine_85: can you try to call with bt paired ? |
| 21:46.16 | cr2 | some noexistent number |
| 21:46.22 | cr2 | and dump MSM_CLK |
| 21:46.34 | lupine_85 | sure |
| 21:47.02 | cr2 | i don't see the btaudio clk enabled in your dump |
| 21:49.12 | cr2 | NetRipper: the 3d is a lot of work. for non-android i'll drop it completely with all its wasted ram. |
| 21:50.04 | cr2 | hmm. 7c and 88 |
| 21:50.50 | lupine_85 | http://rafb.net/p/DCIyyR47.html |
| 21:51.17 | lupine_85 | first is device paired, no call. second is midway through a call with my sister |
| 21:53.32 | lupine_85 | cr2: let me know if you want anything else clinking |
| 21:55.56 | cr2 | hmm. still nothing |
| 21:56.07 | cr2 | lupine_85: do you connect over usb ? |
| 21:56.23 | lupine_85 | yes |
| 21:56.26 | lupine_85 | for HaRET |
| 21:56.30 | *** join/#htc-linux dzo_ (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 21:56.34 | cr2 | can you connect over wifi ? |
| 21:56.38 | cr2 | yes, for haret |
| 21:57.07 | lupine_85 | erm, possibly |
| 21:57.09 | lupine_85 | never tried |
| 21:57.49 | lupine_85 | tries |
| 22:00.03 | lupine_85 | I can! |
| 22:00.56 | lupine_85 | And in other news, WinMo supports IPv6 |
| 22:01.04 | cr2 | ok |
| 22:01.17 | cr2 | can you dump with usb cable in and out ? |
| 22:01.31 | lupine_85 | previous dumps are with it in... do you want me to redo? |
| 22:02.01 | lupine_85 | (and are we still doing this with and without bluetooth, or is this something different?) |
| 22:03.29 | cr2 | lupine_85: usb on and usb off |
| 22:03.55 | cr2 | bt does not use these regs, it's clear. |
| 22:05.30 | *** join/#htc-linux MethoS (n=lem@host-091-097-244-059.ewe-ip-backbone.de) |
| 22:05.56 | lupine_85 | okidoki |
| 22:09.44 | lupine_85 | cr2: http://rafb.net/p/CnfMx168.html |
| 22:09.53 | lupine_85 | before plugging usb in, right after, and about 30sec after |
| 22:14.35 | cr2 | ok. the e0 does not change... |
| 22:15.20 | cr2 | 22 vs 24 |
| 22:15.23 | *** join/#htc-linux acsviluppo (n=acsvilup@94.163.181.104) |
| 22:15.43 | cr2 | 4 is uart2dm |
| 22:16.23 | cr2 | the first 2 is always on. |
| 22:17.21 | cr2 | ok, so the bit25 may change |
| 22:17.25 | *** join/#htc-linux Beef (n=beef@modemcable173.233-37-24.mc.videotron.ca) |
| 22:19.00 | *** join/#htc-linux dzo (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 22:19.47 | cr2 | hmm, it's this one |
| 22:19.50 | cr2 | 2,25 0x4,0x2000000 +0x2c0 =0xa00 ? |
| 22:20.27 | lupine_85 | this is good? |
| 22:25.43 | *** join/#htc-linux ALoGeNo (n=alogeno@unaffiliated/alogeno) |
| 22:25.50 | ALoGeNo | lo |
| 22:31.35 | cr2 | lupine_85: it's some video-related bit |
| 22:41.32 | *** join/#htc-linux dzo_ (n=dzo@121-98-128-127.bitstream.orcon.net.nz) |
| 22:50.42 | *** part/#htc-linux Balsat (n=kll@87.72.13.87) |
| 22:52.20 | *** join/#htc-linux Dunedan (n=dunedan@phoenitydawn.de) |
| 22:54.18 | *** join/#htc-linux acsviluppo (n=acsvilup@94.163.181.104) |
| 22:54.25 | *** part/#htc-linux Dunedan (n=dunedan@phoenitydawn.de) |
| 22:55.30 | dcordes | lupine_85: still got the autobuilder active? |
| 23:10.31 | *** join/#htc-linux exco (n=exco@e181120013.adsl.alicedsl.de) |
| 23:11.08 | *** join/#htc-linux Loki657 (n=Untoucha@82.147.51.146) |
| 23:11.22 | *** join/#htc-linux Venny (i=Travis@h216-45-127-2.dynamic.platinum.ca) |
| 23:12.04 | *** join/#htc-linux cmonex (n=xy6091@o252et3y4a.adsl.datanet.hu) |
| 23:15.13 | Untouchab1e | Good night all |
| 23:23.37 | *** join/#htc-linux Balsat (n=kll@87.72.13.87) |
| 23:29.11 | *** join/#htc-linux Guest84864 (n=root@87.72.13.87) |
| 23:29.29 | Guest84864 | ? |
| 23:29.39 | maejrep | cr2: I've made some changes to match the PMDH init at http://wiki.xda-developers.com/index.php?pagename=RaphaelMDDI |
| 23:30.04 | maejrep | so that's all done in mddi.c |
| 23:31.02 | maejrep | but it seems like the rest of the init for the panel itself is done in the -panel file, with the init tables (toshiba, plus epson panel for raph800) |
| 23:32.41 | maejrep | i'm just not sure where to put the other 3 vreg enables (9,3,6). -panel enables 8 and a now, but the trout panel file only did 2 vregs, so I'm not sure if the other 3 should be done in the same place or not |
| 23:34.04 | *** part/#htc-linux Balsat (n=kll@87.72.13.87) |
| 23:35.16 | *** join/#htc-linux balsat (n=balsat@87.72.13.87) |
| 23:35.56 | maejrep | cr2: do you know where in the spl the tri-color screen gets drawn? |
| 23:36.16 | maejrep | that might help track down what's going on with the color bit packing (rgb444 vs rgb666 vs rgb565) |
| 23:36.42 | maejrep | cause those colors are drawn correctly |
| 23:37.46 | *** join/#htc-linux nebi (n=nebi@170.ftth2.cust.fyrobs1.upps.se.borderlight.net) |
| 23:44.13 | NetRipper | haha |
| 23:44.20 | NetRipper | *beep*ing awesome |
| 23:44.51 | NetRipper | no more booting into wince.. kexec is working... can just reload another linux kernel while linux is running |
| 23:45.03 | NetRipper | scp a new kernel, kexec into it |
| 23:45.12 | NetRipper | very sweet |
| 23:46.40 | NetRipper | shutdown didnt go as planned yet, so i got the msmfb running twice now and htc_fb_console mixing in as well |
| 23:46.56 | NetRipper | its funny stuff though |
| 23:47.47 | Pure4Real | NetRipper: does this mean it's possible to load an other linux kernel from android? |
| 23:48.33 | NetRipper | in a nutshell, enable kexec in .config, boot using anstrom, get internet on your device (i setup my linux as router), opkg update;opkg install kexec-tools, mount mmc card, copy new zImage, kexec -f --initrd=..path.. zImage |
| 23:48.46 | NetRipper | Pure4Real, er, you mean an actual G1 device? |
| 23:49.13 | Pure4Real | eh no, forgot to mention kaiser :) |
| 23:49.44 | NetRipper | will work for kaiser too |
| 23:49.47 | NetRipper | probably |
| 23:49.48 | Pure4Real | nice |
| 23:50.02 | Pure4Real | saves a reboot to wince to try a new kernel |
| 23:50.03 | NetRipper | i guess it should work for pretty much any device, as it's generic stuff |
| 23:50.07 | NetRipper | but i just didnt expect it to work like this |
| 23:50.08 | NetRipper | :P |
| 23:50.23 | Pure4Real | but this opkg is for angstrom right? |
| 23:50.28 | NetRipper | yes |
| 23:50.35 | NetRipper | but opkg is only to get kexec-tools installed |
| 23:50.40 | NetRipper | you can get those tools anyway you want of course |
| 23:50.46 | Pure4Real | right, cool |
| 23:51.01 | NetRipper | i think its nice for development |
| 23:51.08 | NetRipper | saves booting into wince every time |
| 23:51.10 | maejrep | NetRipper: nice |
| 23:51.14 | Pure4Real | indeed |
| 23:51.16 | maejrep | that will be very helpful :p |
| 23:51.32 | NetRipper | :) |
| 23:51.35 | maejrep | what do you mean about msmfb and htc_fb_console? It doesn't deinit/reinit properly? |
| 23:51.40 | NetRipper | exactly |
| 23:51.54 | NetRipper | doesn't deinit, and the handover doesn't occur anymore, so it stays active |
| 23:52.05 | maejrep | is it because we never expect to have to worry about reinitializing, because it's always been out of wince before |
| 23:52.27 | NetRipper | well i use the -f flag to force |
| 23:52.37 | NetRipper | as when i 'reboot' it crashes the ARM9 |
| 23:52.45 | NetRipper | and in your case it'd soft-reset the device |
| 23:53.12 | maejrep | hmm, does kexec actually go through a deinit process? or does it just replace the kernel and act as if its a fresh boot? |
| 23:53.15 | NetRipper | normally it performs a shutdown procedure, then at the end, it kexec's.. but in our case, it still executs the reset hook |
| 23:53.19 | maejrep | ah |
| 23:53.27 | maejrep | hmm |
| 23:53.40 | maejrep | I've never worked with kexec before |
| 23:53.45 | NetRipper | me neither |
| 23:54.00 | NetRipper | it reminds me of the old QEMM ages in dos |
| 23:54.01 | maejrep | do you actually have to reboot, or is kexec enough? |
| 23:54.05 | NetRipper | kinda works the same way i think |
| 23:54.16 | NetRipper | kexec is enough, the device doesn't actually reboot |
| 23:54.22 | maejrep | should find out why reboot doesn't work for you |
| 23:54.37 | maejrep | but you type 'reboot' to get it to execute the new kernel? |
| 23:54.40 | NetRipper | yea it hangs during the proc_comm command |
| 23:54.42 | NetRipper | no |
| 23:54.53 | maejrep | ok |
| 23:54.54 | NetRipper | normally you do the kexec command as i put above but without the -f |
| 23:55.00 | maejrep | ah |
| 23:55.06 | maejrep | why do you need -f? |
| 23:55.20 | NetRipper | because without -f, it shuts down.. and during shutdown it does the reset hook |
| 23:55.23 | NetRipper | which hangs my device |
| 23:55.32 | maejrep | strange |
| 23:57.34 | NetRipper | another thing.. unrelated to this.. when i add the 2nd memory bank to the fixup, android doesn't boot anymore... it hangs at the very moment when it tries to go into gfx mode (after screen blanks and before the android logo lights up etc)... i've tested the 2nd memory bank.. it seems all read/writable.. with the 2nd memory bank disabled, android boots |
| 23:57.39 | NetRipper | its weird too |
| 23:58.43 | NetRipper | btw, sparse and discontionous (or so) memory formats are not present in ARM... the arm way is the manual flat mem layout |
| 23:59.12 | NetRipper | at least in the kernel the options are not selectable ;) |
| 23:59.33 | NetRipper | and without android it works fine, so i guess thats not the issue |
| 23:59.44 | NetRipper | i should try running X, see if that goes well |
| 23:59.57 | NetRipper | well.. thats for another day |