| 00:00.09 | druidu | NetRipper : i get an error in opening /dev/console, the /dev/console in your initrd uses major 5 minor 1, msm_fb can handle that? |
| 00:00.48 | NetRipper | druidu, should work |
| 00:00.49 | dcordes_ | ginge, what's needed in order to try out sound? |
| 00:00.56 | NetRipper | druidu, again, works for me :p |
| 00:01.09 | druidu | well, I was running with my console |
| 00:01.16 | druidu | let me try to make the fb work |
| 00:01.25 | NetRipper | druidu, ah your own driver you mean? |
| 00:02.38 | druidu | no, it's just an early boot console, and it certainly doesn't work for major 5 minor 1... |
| 00:02.55 | BruteSource | dcordes_ enabled? can you talk on the phone and browse the net at the same time... |
| 00:03.12 | BruteSource | i heard hsdpa could do that |
| 00:03.25 | NetRipper | druidu, are you sure you're using my initrd? it's fairly basic |
| 00:04.00 | BruteSource | its suposed to be the feature that makes video calling availible |
| 00:04.12 | NetRipper | druidu, i dont understand that you are having so much trouble getting it to boot to shell :) |
| 00:05.01 | druidu | bad karma :P |
| 00:06.06 | parmaster | cr2, i'll check that cdma modem for ya - |
| 00:06.07 | parmaster | root@htcblueangel:/var/volatile/tmp$ ipkg install cu_1.07-r2_armv5te.ipk |
| 00:06.08 | parmaster | Installing cu (1.07-r2) to root... |
| 00:06.08 | parmaster | Configuring cu |
| 00:08.27 | cr2_ | FFUART |
| 00:08.38 | cr2_ | cu -l /dev/ttyS0 -s 115200 |
| 00:09.28 | cr2_ | FMInit_2.bts |
| 00:09.37 | cr2_ | FM_on_2_1.bts |
| 00:10.32 | druidu | what are these bts files? are those for enabling fm radio? |
| 00:10.34 | cr2_ | # Description : BRF6350 2.0 FW 2.34 FM Initialization |
| 00:10.34 | cr2_ | # Compatibility: BRF6350 2.0 ROM w/ 2.0.34 Firmware |
| 00:10.54 | cr2_ | maybe brf6350 has fm radio inside ? why not. |
| 00:11.15 | druidu | brf6350 was the bluetooth chip or what? |
| 00:11.24 | cr2_ | yes |
| 00:12.12 | cr2_ | # FM ON |
| 00:12.12 | cr2_ | SEND_COMMAND: ogf=0x3f ocf=0x137 1 -> |
| 00:12.12 | cr2_ | ACTION_SEND_COMMAND: 0x01 0x37 0xfd 0x01 0x01 |
| 00:12.32 | cr2_ | many vendor-specific commands |
| 00:12.58 | cr2_ | 137, and the rest is 135 |
| 00:13.46 | cr2_ | #log "FM_ON" (default 32KHz) |
| 00:13.46 | cr2_ | SEND_COMMAND: ogf=0x3f ocf=0x137 1 -> |
| 00:13.47 | cr2_ | ACTION_SEND_COMMAND: 0x01 0x37 0xfd 0x01 0x01 |
| 00:13.59 | cr2_ | nice :) |
| 00:14.09 | druidu | wonder if we can hack a driver to go beyond and below the fm range :P |
| 00:14.28 | cr2_ | #ADC settings |
| 00:14.28 | cr2_ | SEND_COMMAND: ogf=0x3f ocf=0x135 7 -> |
| 00:14.36 | cr2_ | druidu: you don't need a driver |
| 00:14.48 | cr2_ | these commands may be sent by hcitool |
| 00:14.59 | cr2_ | you just need to write the script |
| 00:15.14 | cr2_ | #power on: FM and RDS |
| 00:15.14 | cr2_ | SEND_COMMAND: ogf=0x3f ocf=0x135 5 -> |
| 00:15.15 | cr2_ | ACTION_SEND_COMMAND: 0x01 0x35 0xfd 0x05 0x20 0x02 0x00 0x00 0x03 |
| 00:15.25 | druidu | NetRipper works with framebuffer driver! |
| 00:15.33 | NetRipper | druidu, good |
| 00:15.53 | druidu | did you get rid of all those annoying mdp irq already on 4 4 ? |
| 00:15.53 | szsoftware | cr2_: what are you talking about concretely? where are these informations from? And on which device? |
| 00:16.08 | druidu | szsoftware : raphael/diamond fm/rds chip |
| 00:16.18 | cr2_ | szsoftware: fm/rds radio on diam/raph |
| 00:16.38 | NetRipper | you think we may be able to get TMC from it? |
| 00:16.42 | druidu | LOOOOOOOOOOOOOOOL, I can write digit 5 and letter k |
| 00:16.43 | szsoftware | druidu: So it's far from getting such stuff working on msm7200? |
| 00:16.47 | druidu | using buttons on the phone |
| 00:16.51 | NetRipper | druidu, sweet ;) |
| 00:17.02 | NetRipper | druidu, we can get 4, 1 and ~ |
| 00:17.23 | druidu | we can make an input system to work like 5 keypresses -> encode the bits and generate one char |
| 00:17.27 | dcordes_ | ginge, can you give me the latest msm_sdcc.c ? |
| 00:18.21 | druidu | and also home key is volume down :) |
| 00:18.35 | cr2_ | NetRipper: why not fix the gpio numbers instead ? |
| 00:18.48 | druidu | got a 'u' too |
| 00:19.28 | NetRipper | cr2_, keyboard is via gpio? |
| 00:19.29 | *** join/#htc-linux EA2 (n=chipper@cpe-024-074-138-191.carolina.res.rr.com) |
| 00:19.39 | NetRipper | cr2_, i thought only the hardware buttons were gpio? |
| 00:19.44 | cr2_ | yes |
| 00:20.04 | druidu | it can't be |
| 00:20.13 | cr2_ | the keyboard,backlights,capacitive sensor, luminance sensor is on i2c |
| 00:20.13 | druidu | too many gpios would be needed, right? |
| 00:20.24 | dcordes_ | new vogue code http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=commit;h=0ad49199160f891b30046f295ae4df786718615f |
| 00:20.49 | NetRipper | cr2_, so that's not gpio, or is i2c accessed via gpios? |
| 00:21.10 | cr2_ | there is some atmel microcontroller |
| 00:21.20 | cr2_ | with pwm and adc channels |
| 00:21.35 | cr2_ | which talks i2c |
| 00:21.49 | NetRipper | i wish i knew what you were saying |
| 00:22.08 | cr2_ | so you can change the backlight brightness, ask about the capacitive sensor voltage, luminosity, and such. |
| 00:22.08 | NetRipper | so how does fixing gpio help us getting keyboard? |
| 00:22.33 | cr2_ | it does not help |
| 00:22.39 | NetRipper | oh, i thought that's what you were implying |
| 00:22.40 | NetRipper | :) |
| 00:22.51 | dcordes_ | druidu, NetRipper, don't know if it helps http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=blob;f=arch/arm/mach-msm/board-kaiser-keypad.c;hb=refs/heads/htc-msm |
| 00:22.55 | cr2_ | but you can create as much keys and you have key combinations :) |
| 00:22.58 | druidu | isn't gpio working? my keypad buttons are working => gpio buttons working |
| 00:23.23 | cr2_ | keypad should not send 'letters' |
| 00:23.36 | parmaster | cr2_: but in startup we have "set cmdline "root=/dev/hda2 rootdelay=10 console=ttyS0,115200n8 console=tty0" |
| 00:23.43 | druidu | doesn't matter, the mapping is wrong |
| 00:23.46 | parmaster | so ttyS0 is in use |
| 00:23.46 | druidu | but it works |
| 00:23.53 | cr2_ | parmaster: then your startup is fucked. |
| 00:24.02 | cr2_ | parmaster: it's some ipaq stuff |
| 00:24.10 | parmaster | ok so remove it then |
| 00:24.26 | cr2_ | parmaster: your console is tty0 |
| 00:25.03 | cr2_ | druidu: there are only 3x4=12 raw buttons |
| 00:25.06 | parmaster | ok i'll just remove the entry regarding console=ttyS0,115200n8 |
| 00:26.51 | cr2_ | # Enable Dynamic LNA mode switch |
| 00:26.51 | cr2_ | SEND_COMMAND: ogf=0x3f ocf=0x135 7 -> |
| 00:26.52 | cr2_ | ACTION_SEND_COMMAND: 0x01 0x35 0xfd 0x07 0x64 0x04 0x00 0x00 0x00 0x00 0x01 |
| 00:27.10 | cr2_ | looks like a built-in radio in 6350 |
| 00:28.21 | cr2_ | druidu: i think hciattach supports loading .bts scripts |
| 00:28.46 | cr2_ | druidu: we only need to trace uart1 (i think) to verify that these commands are set over the wire |
| 00:30.50 | cr2_ | ok, it seems that fixing sdio speeds should have highest priority. |
| 00:32.18 | cr2_ | InitBattery dwPowerOnReason=52455354 |
| 00:32.25 | cr2_ | looks like ascii |
| 00:34.34 | cr2_ | maker_id ec deviceid bc |
| 00:35.47 | *** join/#htc-linux dante_ (n=dante@net-93-148-251-28.t2.dsl.vodafone.it) |
| 00:39.08 | druidu | 3x4=12 raw buttons?? I don't have that many, you're talking about raphael? |
| 00:40.42 | cr2_ | 11 are there |
| 00:41.03 | NetRipper | (available in gpio, but not neccesarily on device) |
| 00:41.06 | cr2_ | but i think some of them are i2c too |
| 00:44.16 | cr2_ | tracing i2c will be fun ;) |
| 00:44.42 | cr2_ | i've seen 10bit sequences there. don't know if g1 driver supports it |
| 00:46.04 | parmaster | cr2_: still failing after fixing up the startup |
| 00:46.13 | parmaster | getty is running though: |
| 00:46.14 | parmaster | 1294 root 520 S /sbin/getty 115200 ttyS0 vt100 |
| 00:48.21 | parmaster | still saying Line in use |
| 00:48.35 | cr2_ | edit /etc/inittab |
| 00:48.40 | cr2_ | kill -HUP init |
| 00:48.48 | parmaster | okee doke |
| 00:49.05 | cr2_ | evil ipaq junk still doesn't want to go away :) |
| 00:49.30 | cr2_ | chown uucp.uucp /dev/ttyS0 after that |
| 00:49.53 | cr2_ | 22:13:38 [D:SD] SD power off+ |
| 00:49.53 | cr2_ | 22:13:38 Turn off PMIC VREG[0x800000]. |
| 00:49.53 | cr2_ | 22:13:38 [D:SD] SD power off- |
| 00:50.15 | cr2_ | bit by bit gathering information... |
| 00:51.01 | cr2_ | why qualcomm wants to keep it secret is beyond my understanding |
| 00:51.53 | cr2_ | druidu: [NAV]:PSOC PlatName 1! MJVersion 0x2 MIVersion:0x36 |
| 00:52.06 | cr2_ | druidu: you may have a different version |
| 00:52.56 | druidu | hehe |
| 00:52.59 | druidu | where did you get that from? |
| 00:53.20 | druidu | btw, NAND_READ_ID = 1500aaec |
| 00:53.42 | dcordes_ | http://www.sanparks.org/parks/kruger/conservation/scientific/gis/cybertracker.php loox |
| 00:54.01 | dcordes_ | they should do a rewrite based on M ;) |
| 00:54.34 | parmaster | cr2_: much better - |
| 00:54.36 | parmaster | root@htcblueangel:/$ cu -l /dev/ttyS0 -s 115200 |
| 00:54.36 | parmaster | Connected. |
| 00:55.08 | druidu | what device ar you connected to? :P |
| 00:55.22 | cr2_ | parmaster: have you loaded the mltiplexer driver ? |
| 00:55.44 | parmaster | cr2_: which kernel module is it? |
| 00:56.09 | cr2_ | dcordes_: yes |
| 00:56.19 | *** join/#htc-linux dcordes__ (n=dcordes@f049007146.adsl.alicedsl.de) |
| 00:56.26 | cr2_ | parmaster: n_*htc* |
| 00:57.37 | cr2_ | druidu: it's the wince dmesg. at 0x17200000 |
| 00:58.25 | druidu | there's a lot of stuff like that in the source |
| 00:58.37 | druidu | and also, filenames... which means they compiled with debug on or smth |
| 00:58.42 | druidu | or assertions... |
| 00:58.57 | parmaster | cr2_: nah, its not loaded let me find it |
| 00:59.49 | NetRipper | and back in time we go |
| 01:00.19 | NetRipper | :) |
| 01:01.28 | szsoftware | it's WINTER-TIME! |
| 01:01.52 | szsoftware | one more our to sleep, no to develope :-) |
| 01:02.40 | ginge | szsoftware: booyah :) its 1am again. |
| 01:02.51 | szsoftware | ginge: :-) |
| 01:03.02 | ginge | i forgot until you mentioned it |
| 01:03.06 | druidu | NetRipper : any idea what's with this err msg: 'No IRQF_TRIGGER set_type function for IRQ xx (troutgpio)' where xx is 191, 192, 188, 186, 190 |
| 01:03.20 | NetRipper | alright, generic linux question, how i give priority to a specific module_init(..)... i'm having a timing issue where a module is init'ed too late |
| 01:03.44 | szsoftware | ginge: dcordes system is possibly infected by the year 2000 issue |
| 01:04.11 | NetRipper | druidu, nope, doesn't ring a bell |
| 01:05.45 | parmaster | cr2_: should that module be included in the normal angstrom distro? would it be in kernel/net ? |
| 01:06.26 | druidu | NetRipper : check out include/linux/init.h |
| 01:06.47 | druidu | line 156 |
| 01:06.59 | NetRipper | i dont have line numbers |
| 01:06.59 | NetRipper | :p |
| 01:07.24 | cr2_ | druidu: troutgpio is htc-egpio :) |
| 01:07.38 | druidu | you can use another function instead of module_init (which is an alias for device_initcall)... |
| 01:07.41 | NetRipper | ah, i do |
| 01:07.42 | NetRipper | :) |
| 01:07.42 | NetRipper | ok |
| 01:07.55 | cr2_ | parmaster: it's in the hh.org CVS |
| 01:08.00 | druidu | but as they say: A "pure" initcall has no dependencies on anything else, and purely initializes variables that couldn't be statically initialized. |
| 01:08.01 | cr2_ | parmaster: check your .config |
| 01:08.12 | druidu | oh, nevermind that |
| 01:08.50 | druidu | cr2_ : so, what do you suggest? troutgpio is not working properly yet for our device? |
| 01:09.01 | cr2_ | you don't need it |
| 01:09.12 | cr2_ | because we don't have cpld |
| 01:09.31 | cr2_ | and it should be reimplemented with htc-egpio anyway |
| 01:09.48 | szsoftware | ok, guys, will sleep soon. |
| 01:09.52 | szsoftware | Good Night! |
| 01:09.57 | ginge | night |
| 01:10.02 | druidu | `night |
| 01:10.08 | druidu | so where do I get htc-epgio? |
| 01:10.17 | cr2_ | druidu: drivers/mfd |
| 01:10.39 | cr2_ | druidu: it's for kaiser & friends only |
| 01:10.55 | cr2_ | you should drop all that code from your baord file |
| 01:11.04 | druidu | what exactly from drivers/mfd? |
| 01:11.33 | cr2_ | don't remember the name |
| 01:11.52 | *** part/#htc-linux szsoftware (n=sven@e178204134.adsl.alicedsl.de) |
| 01:12.09 | druidu | what's cpld anyway? |
| 01:12.20 | cr2_ | http://handhelds.org/cgi-bin/cvsweb.cgi/linux/kernel26/drivers/mfd/htc-egpio.c |
| 01:12.29 | cr2_ | just fyi |
| 01:12.35 | cr2_ | a gpio/irq extender |
| 01:13.29 | dcordes__ | cr2_, I lost track of the kaiser mmc clock situation. is there anything that needs trying now? |
| 01:13.50 | cr2_ | dcordes__: no. |
| 01:14.14 | *** join/#htc-linux cheenky (n=chris@adsl-76-208-178-13.dsl.lsan03.sbcglobal.net) |
| 01:14.16 | cr2_ | dcordes__: i need to document the clock calculation. ginge will take care of the api :) |
| 01:14.37 | ginge | :) yeah working on it now |
| 01:15.24 | cr2_ | ginge: sd,wifi, mddi and i2c clocks are 100% sure |
| 01:15.54 | cr2_ | ginge: the i2c divisor has different location on A vs. non-A cpu |
| 01:16.05 | ginge | hmm... |
| 01:16.13 | ginge | interesting |
| 01:16.17 | druidu | <PROTECTED> |
| 01:16.20 | cr2_ | 0x64 vs 0x68 |
| 01:16.37 | cr2_ | ginge: but the i2c registers ae at a different location too |
| 01:16.52 | cr2_ | ginge: maybe there are 2 i2c cntrollers . who knows ;) |
| 01:17.04 | dcordes__ | is it 2:16 cet? |
| 01:17.07 | cr2_ | druidu: don't know. |
| 01:17.29 | cr2_ | druidu: i think it's some photodiode connected to the atmel ADC channel |
| 01:17.50 | cr2_ | where do you get this data ? |
| 01:20.22 | cr2_ | dcordes__: according to my rtc, yes |
| 01:20.46 | dcordes__ | raphael rtc works? |
| 01:20.58 | cr2_ | dcordes__: notebook |
| 01:21.31 | cr2_ | i would not trust wince with the time anyway. |
| 01:22.38 | cr2_ | where is the g1 bluetooth driver ? |
| 01:25.28 | dcordes__ | trout-kernel-work$ find . | xargs grep -i BRF6300 |
| 01:25.31 | *** join/#htc-linux ravenCoda (n=raven_co@64.50.35.156) |
| 01:29.04 | dcordes__ | hm nothing |
| 01:29.13 | druidu | not sure they made one available |
| 01:29.21 | dcordes__ | cr2_, trout boardfile has some bluetooth content |
| 01:29.32 | dcordes__ | ./arch/arm/mach-msm/board-trout.c:bluetooth_set_power(trout_bluetooth_power_on); |
| 01:29.52 | druidu | although it used to give me some output when it was enabled in the kernel config |
| 01:29.54 | cr2_ | druidu: there is some firmware file in g1 dump |
| 01:30.04 | druidu | http://android.git.kernel.org/?p=kernel/msm.git;a=blob;f=arch/arm/configs/msm_defconfig;h=49680cdc258e35511273194a9cdc3a505c8f1da4;hb=android-msm-htc-2.6.25#l456 |
| 01:30.07 | NetRipper | druidu, how do you set which board-*.c file to use? |
| 01:30.14 | druidu | mtype |
| 01:30.16 | druidu | in default.txt |
| 01:30.17 | NetRipper | ok |
| 01:30.22 | druidu | use one from tools/mach-info |
| 01:30.26 | NetRipper | what's mtype for trout? |
| 01:30.31 | druidu | 1440 |
| 01:30.33 | NetRipper | ok |
| 01:30.34 | druidu | 1439 for halibut |
| 01:30.45 | druidu | I'm using trout |
| 01:30.47 | NetRipper | ok |
| 01:30.49 | NetRipper | im using halibut |
| 01:30.49 | NetRipper | hehe |
| 01:30.51 | dcordes__ | NetRipper, arch/arm/mach-msm/Makefile |
| 01:31.08 | ginge | night all |
| 01:31.12 | dcordes__ | night |
| 01:31.17 | NetRipper | nighte ginge |
| 01:31.34 | NetRipper | dcordes__, yes what am i supposed to see there? |
| 01:31.48 | dcordes__ | ruidu, how do you set which board-*.c file to use? |
| 01:32.10 | NetRipper | dcordes__, the makefile just compiles the stuff... it compiles both halibut and trout |
| 01:32.10 | druidu | set mtype in default.txt |
| 01:32.37 | druidu | each board-* has a define at the end: MACHINE_START(TROUT, "trout") |
| 01:32.51 | druidu | which means that it will activate for MACH_xxx where xxx is TROUT in this case |
| 01:32.53 | cr2_ | 42 clocks on 7201A according to g1 code. but i guess not all of them have 'enable' bit |
| 01:32.58 | NetRipper | druidu, ok |
| 01:33.00 | druidu | constants are in /arch/arm/tools/mach-info |
| 01:33.24 | druidu | constants are in /arch/arm/tools/mach-types |
| 01:33.25 | cr2_ | druidu: which should come from armlinux site |
| 01:33.36 | cr2_ | otherwise diam/raph may be missing |
| 01:33.43 | druidu | yes, as it states in the header: Up to date versions of this file can be obtained from: |
| 01:33.47 | druidu | http://www.arm.linux.org.uk/developer/machines/download.php |
| 01:33.57 | druidu | you should download it, it has defines for DIAMOND :) |
| 01:34.07 | druidu | and RAPHAEL |
| 01:34.26 | druidu | cr2_: yes, google didn't update it in their tree |
| 01:34.43 | druidu | ok, I'm done with making a stable kernel for now, let's play with the touchscreen :D |
| 01:35.08 | cr2_ | HTCDIAMOND and HTCRAPHAEL i think |
| 01:35.13 | druidu | exactly |
| 01:35.23 | cr2_ | stable ? lol |
| 01:35.23 | dcordes__ | were the duplicates removed? |
| 01:35.39 | cr2_ | dcordes__: for kaiser ? |
| 01:35.41 | druidu | dups? probably, there are no dups there, and that's the official one |
| 01:35.42 | dcordes__ | yes |
| 01:35.58 | cr2_ | dcordes__: don't know |
| 01:35.59 | druidu | ah, nope |
| 01:36.03 | druidu | there are still there |
| 01:36.23 | druidu | probably for backward compatibility |
| 01:36.26 | cr2_ | well, silly people always exist ;) |
| 01:36.39 | cr2_ | there are some other dupes too |
| 01:38.38 | *** join/#htc-linux renc (n=user@91.68.208.8) |
| 01:43.29 | *** join/#htc-linux alo (n=QUAKEIII@118.Red-83-49-136.dynamicIP.rima-tde.net) |
| 01:44.35 | druidu | cr2_ : seems like on finger release I get TOUCH2 followed by TOUCH1 |
| 01:44.39 | druidu | and on press just TOUCH1 |
| 01:45.19 | ALoGeNo | lo |
| 01:45.38 | ALoGeNo | hey druidu :) |
| 01:45.47 | druidu | hello |
| 01:45.57 | druidu | cr2_: what was the command in haret to watch some memory area? |
| 01:46.22 | cr2_ | addlist mmutrace |
| 01:46.36 | cr2_ | but you need to know the exact virtual mapping |
| 01:46.57 | cr2_ | so check the 'dump mmu addr 2' first |
| 01:47.21 | druidu | p2v :) |
| 01:47.43 | ALoGeNo | hi cr2_ |
| 01:47.51 | ALoGeNo | parmaster supp |
| 01:48.14 | ALoGeNo | tmzt hello master :) |
| 01:49.09 | cr2_ | druidu: it will be incomplte |
| 01:50.10 | druidu | so I wanna watch 0x92000000 => 0x92000200, I look at which virtual addresses it maps to or what? |
| 01:50.24 | *** join/#htc-linux BruteSource (n=BruteSou@m700e36d0.tmodns.net) |
| 01:54.11 | cr2_ | yes |
| 01:54.40 | druidu | ok, I'm doing: addlist mmutrace 0xaa300000 then wirqs 10 |
| 01:54.40 | parmaster | sup ALoGeNo |
| 01:54.49 | druidu | but nothing changes, I just get irq events |
| 01:55.54 | cr2_ | <PROTECTED> |
| 01:56.00 | cr2_ | aa3 is physical |
| 01:56.09 | cr2_ | add 0xb2000000 |
| 01:56.26 | cr2_ | the whole 0x1000 page |
| 01:56.40 | cr2_ | addlist mmutrace 0xb2000000 0x1000 |
| 01:57.06 | druidu | much better :) |
| 01:57.15 | druidu | I didn't know about the size param |
| 01:57.31 | cr2_ | <PROTECTED> |
| 01:57.31 | cr2_ | <PROTECTED> |
| 01:57.40 | cr2_ | these are the really interesting |
| 01:57.41 | druidu | what's that? |
| 01:57.52 | cr2_ | you will also get the ts irqs |
| 01:58.00 | cr2_ | the x/y. i guess :) |
| 01:58.59 | cr2_ | do oyu see these : |
| 01:59.02 | cr2_ | 0x1e 30 0x40000000 INT_TCHSCRN1 + |
| 01:59.02 | cr2_ | <PROTECTED> |
| 02:00.17 | druidu | yep |
| 02:00.28 | parmaster | cr2_: i just used the autobuild for angstrom... didn't compile a build from scratch |
| 02:00.33 | druidu | what's the difference between '=' and '==' in the output? |
| 02:00.35 | druidu | read vs write? |
| 02:00.55 | parmaster | don't see that the muxer is included in the current autobuild: |
| 02:00.55 | druidu | nvm, seems like so |
| 02:00.56 | parmaster | root@htcblueangel:/lib/modules/2.6.21-hh20$ find /lib/modules/2.6.21-hh20/ -name "n*htc*" -print |
| 02:03.13 | parmaster | if i can get the kernel headers to compile against it would be easier then i can just get the module hack up a makefile and have it |
| 02:03.36 | parmaster | beats building the whole thing every time |
| 02:03.41 | cr2_ | parmaster: http://handhelds.org/cgi-bin/cvsweb.cgi/linux/kernel26/drivers/char/n_tihtc.c |
| 02:03.56 | parmaster | cool thx |
| 02:04.54 | druidu | and I reset the list or delete entries? (mmulist) |
| 02:05.16 | cr2_ | druidu: i think you can only delete the whole list |
| 02:05.23 | druidu | how? |
| 02:05.27 | druidu | can't find any useful command... |
| 02:07.30 | cr2_ | hmm. |
| 02:07.35 | cr2_ | clearlist |
| 02:07.37 | cr2_ | ? |
| 02:07.44 | druidu | nope |
| 02:07.53 | druidu | only clearvar which doesn't work for this |
| 02:08.03 | cr2_ | help ? |
| 02:09.39 | cr2_ | clear |
| 02:09.54 | cr2_ | http://www.handhelds.org/moin/moin.cgi/HaRET_20Documentation |
| 02:10.02 | cr2_ | clear mmutrace |
| 02:10.26 | druidu | :D |
| 02:10.27 | druidu | thanks |
| 02:11.01 | cr2_ | do the values in 4 corners make sense ? |
| 02:19.37 | *** join/#htc-linux dcordes_ (n=dcordes@unaffiliated/dcordes) |
| 02:19.47 | cr2_ | good night |
| 02:21.26 | druidu | yep, I have a linear output, at least for y |
| 02:21.32 | *** part/#htc-linux dcordes_ (n=dcordes@unaffiliated/dcordes) |
| 02:21.34 | druidu | testing x now but it should be ok |
| 02:25.40 | druidu | data_lo_ave and data_up_ave are averages, data_lo_ave seems more useful (both contain x then y (16 bits each) |
| 02:30.02 | parmaster | nite cr2_ |
| 02:35.57 | BruteSource | is penguinz here? |
| 02:37.23 | *** join/#htc-linux alo (n=QUAKEIII@118.Red-83-49-136.dynamicIP.rima-tde.net) |
| 02:40.02 | druidu | 's gonna write a touchscreen driver for diamond |
| 02:41.20 | tmzt | neat. is it resistive or capacitive? |
| 02:41.23 | BruteSource | is diamond msm7*? |
| 02:44.39 | parmaster | hmm alge |
| 02:45.00 | parmaster | alge's image from angstrom has the muxer i'll just try that |
| 02:45.21 | tmzt | parmaster: you still have that led? you are trying phone now? |
| 02:45.55 | parmaster | yeah, i'm checking something cr2 mentioned about cdma modem now.. |
| 02:46.06 | parmaster | i'll deal with the led later |
| 02:47.34 | tmzt | that could help apache maybe? |
| 02:47.49 | parmaster | he mentioned that cdma modem on apache was hard |
| 02:48.14 | parmaster | and that he had heard that cdma modem was working on the boardid 4 |
| 02:48.24 | parmaster | so i'm just verifying that because i have the hardware here |
| 02:48.30 | tmzt | yeah, I've got that to look forward to on moto q |
| 02:48.30 | BruteSource | the blackjack II has 128mb of ram wtf |
| 02:49.07 | tmzt | I like it's keyboard even less, BruteSource from just playing with it |
| 02:49.12 | parmaster | this htc mux driver appears to be a key part of it |
| 02:50.30 | BruteSource | tmzt moto q has 128mb ram as well? |
| 02:50.51 | tmzt | no |
| 02:50.56 | tmzt | cdma modem |
| 02:50.57 | tmzt | 64 |
| 02:51.39 | BruteSource | you said you you have that t look forward to on the q? |
| 02:52.35 | druidu | resistive |
| 02:53.25 | druidu | does anybody know how calibration works? it that handled by the input subsystem or it needs to be done in the driver? |
| 02:54.01 | tmzt | BruteSource: I have cdma modem/mux to look forward to, though it's not n_htc its probably like on the ezx phones |
| 02:54.22 | tmzt | druidu: libts should handle that |
| 02:54.33 | tmzt | druidu: dzo put it in his driver to get osk working |
| 02:54.57 | tmzt | druidu: and because android wanted (old sdk versions) screen resolution coordinates |
| 02:55.30 | tmzt | druidu: set driver flags for EV_ABS and abs flags for ABS_X ABS_Y ABS_PRESSURE |
| 02:56.03 | tmzt | druidu: and I think EV_TOUCH , EV_PEN is for active digitizers, button on the side of the pen |
| 02:57.07 | tmzt | druidu: I asked about resisitive because someone mentioned synaptics-i2c, but I guess that is for g1 |
| 02:57.54 | tmzt | not input subsystem either, handled in userspace |
| 02:58.16 | tmzt | just send ABS_X ABS_Y ABS_PRESSURE and if needed EV_SYNC |
| 03:04.33 | tmzt | BruteSource: it looks like Blackjack II is omap at 260mhz, and Q9 is omap at 325 |
| 03:04.44 | tmzt | BruteSource: so Q9 is not same hw as Q |
| 03:05.44 | tmzt | BruteSource: what mhz is your dash? |
| 03:09.14 | BruteSource | 197 |
| 03:09.32 | BruteSource | in wince im overclocked to 266 |
| 03:12.35 | parmaster | heh, i threw the n_tihtc.ko binary from alge's image into the angstrom autobuild and insmodded it successfully but the modem is still unresponsive.. |
| 03:12.46 | parmaster | i'm going to just switch to alge |
| 03:12.47 | druidu | I noticed it's selected by default (synaptics-i2c), but it's not on diamond/raphael looks like |
| 03:13.03 | druidu | about pressure... not sure if we have that |
| 03:13.15 | druidu | seems to be only position, no pressure data |
| 03:13.15 | parmaster | alge's image its looks way more complete than the angstrom autobuild images |
| 03:16.12 | parmaster | tmzt: how far are you along with the Q? |
| 03:28.46 | tmzt | working on it, trying to get motorola ezx pcap driver into my board |
| 03:29.49 | tmzt | druidu: you have to have pressure or set it above the threashold value on pen irq |
| 03:30.09 | tmzt | druidu: look at tsc2003.c in kaiser on ltg |
| 04:09.32 | *** join/#htc-linux penguinz (n=opera@66-168-215-122.dhcp.athn.ga.charter.com) |
| 04:12.21 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbf9f5a.pool.einsundeins.de) |
| 04:16.12 | *** join/#htc-linux Poohba1 (n=poohba@c-71-58-20-66.hsd1.nj.comcast.net) |
| 04:46.38 | *** join/#htc-linux data|2 (n=datachao@189.27.191.132.adsl.gvt.net.br) |
| 05:23.19 | ALoGeNo | tmzt are u there? |
| 05:23.30 | ALoGeNo | is kde ported to arm? |
| 05:23.40 | ALoGeNo | maybe kde2? or whatever? |
| 05:24.05 | ALoGeNo | i know that the guys from zubuntu have kde ruring |
| 05:27.56 | BruteSource | zubuntu? |
| 05:28.08 | BruteSource | do i even want to know lol |
| 05:33.24 | ali1234 | well seems like there's at least three different projects called ubuntu but i guess ALoGeNo was refering to ubuntu for zaurus? |
| 05:33.38 | ALoGeNo | hehe |
| 05:33.48 | ALoGeNo | BruteSource yep zubuntu ;) |
| 05:34.20 | ALoGeNo | i was booted one zubuntu debian cortez in my uni ;))) |
| 05:34.59 | ALoGeNo | but theys recomend to use icewm and i have clean debian with icewm rigth now.. then i have enouth :) |
| 05:35.19 | BruteSource | does it use gpe? |
| 05:36.24 | ALoGeNo | http://www.omegamoon.com/blog/static.php?page=ZaurusUbuntu |
| 05:36.39 | ALoGeNo | http://www.zaurus.org.uk/ubuntu/download/zubuntu-minimal-rootfs.tar.gz |
| 05:37.04 | ALoGeNo | it is for zaurus |
| 05:37.30 | BruteSource | sorry on my device which has no support in this irc client for clicking or copying links |
| 05:41.16 | ALoGeNo | np |
| 05:42.22 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 06:33.11 | ALoGeNo | kde booting in uni that is awesome =) |
| 06:36.43 | *** join/#htc-linux Sti_0239 (n=Where_is@134.171-65-87.adsl-dyn.isp.belgacom.be) |
| 06:51.54 | parmaster | ALoGeNo: aren't you running debian on your uni? |
| 06:52.27 | ALoGeNo | arent? |
| 06:52.32 | ALoGeNo | what you mean |
| 06:52.38 | parmaster | no i mean.. you are righ? |
| 06:53.18 | ALoGeNo | i have debian runing yep |
| 06:53.38 | ALoGeNo | now im testing kde but i think that uni have little memory |
| 06:53.50 | ALoGeNo | and 128MB upgrade is a lot spensive |
| 06:54.10 | parmaster | wow |
| 06:54.18 | ALoGeNo | maybe gnome, or i back to icewm |
| 06:54.18 | parmaster | gomunicator doesn't work for me now |
| 06:54.36 | ALoGeNo | gomunicator? |
| 06:54.41 | ALoGeNo | some gonome tool? |
| 06:54.43 | parmaster | it worked for me under tmobile |
| 06:54.50 | parmaster | no, the phone application |
| 06:54.50 | ALoGeNo | gnome* |
| 06:54.56 | parmaster | gpoe |
| 06:54.56 | ALoGeNo | oh |
| 06:54.58 | parmaster | gpe |
| 06:55.17 | ALoGeNo | i think that you can test the uni phone tool no? |
| 06:55.35 | ALoGeNo | titchy phone maybe runs for you no? |
| 06:57.06 | parmaster | ummm the previous kernels always worked |
| 06:57.14 | parmaster | but i had a tmobile simthen |
| 06:57.30 | parmaster | now i have at&t.. i wonder if that could be it |
| 06:57.56 | ALoGeNo | but is the same model no? |
| 06:58.11 | ALoGeNo | or new version with new hardware? |
| 07:00.37 | parmaster | no same regular board id ba |
| 07:01.10 | tmzt | parmaster: you have cmda and gsm version? |
| 07:01.24 | parmaster | yes i have both |
| 07:01.50 | ALoGeNo | morning tmzt master |
| 07:02.39 | tmzt | hey, ALoGeNo, how is uni going now? |
| 07:03.09 | ALoGeNo | the wifi same crap :P but the rest its fine |
| 07:03.25 | tmzt | what are you using? |
| 07:03.36 | ALoGeNo | im playing with kde but is sssslow.. |
| 07:03.50 | ALoGeNo | 2.6.21hh20 |
| 07:03.52 | tmzt | still debian? |
| 07:03.56 | ALoGeNo | same kernel.. |
| 07:04.03 | ALoGeNo | iep |
| 07:06.05 | ALoGeNo | maybe now ill try to download an compile 2.6.23 from poky |
| 07:06.23 | tmzt | you found it? |
| 07:07.00 | ALoGeNo | that ppl have git repo |
| 07:07.18 | ALoGeNo | and if they have htcuniversal builds maybe is a branch |
| 07:09.27 | tmzt | where is the git? |
| 07:09.37 | ALoGeNo | letme check it |
| 07:12.02 | ALoGeNo | Currently it works for svn, git and bzr repositories. |
| 07:12.25 | ALoGeNo | http://www.pokylinux.org/doc/poky-handbook.html |
| 07:13.08 | ALoGeNo | http://www.pokylinux.org/getit/ |
| 07:15.38 | *** join/#htc-linux cheenky (n=cheeny@pool-71-246-39-83.lsanca.fios.verizon.net) |
| 07:22.09 | ALoGeNo | wowo im lost with svn :/ |
| 07:22.18 | ALoGeNo | git is more easy.. |
| 07:22.43 | ALoGeNo | you see some interestant tmzt? |
| 07:41.08 | tmzt | ALoGeNo: have you tried poky kernel? |
| 07:41.27 | tmzt | ALoGeNo: I found the patch, it looks pretty complete |
| 07:41.36 | tmzt | sound, phone, bluetooth |
| 07:41.55 | ALoGeNo | nope i dunno at all how to apply a path :/ |
| 07:42.14 | ALoGeNo | and where you found the patch and kernel? |
| 07:42.15 | tmzt | you didn't find a zImage, or it didn't work? |
| 07:42.31 | ALoGeNo | didnt work |
| 07:43.01 | tmzt | http://dev.openbossa.org/trac/mamona/browser/packages/linux/linux-rp-2.6.23%2B2.6.24-rc0%2Bgit/htcuni.patch |
| 07:43.31 | tmzt | it's against 2.6.23 and some of the api's have changed on newer kernels |
| 07:45.05 | ALoGeNo | and the kernel sources? from kernel.org no? |
| 07:45.32 | tmzt | you could get 2.6.23 on kernel.org and try it, patch -p1 < x.patch |
| 07:45.40 | ALoGeNo | :D |
| 07:45.42 | tmzt | in the top of the linux source directory |
| 07:46.02 | ALoGeNo | thank you man hehe :) |
| 07:50.25 | tmzt | doesn't look like there is any wifi |
| 07:50.49 | tmzt | seperate patch |
| 07:51.00 | tmzt | http://dev.openbossa.org/trac/mamona/browser/packages/linux/linux-rp-2.6.23%2B2.6.24-rc0%2Bgit/htcuni-acx.patch |
| 07:51.13 | *** join/#htc-linux dvyjones (n=dvyjones@wikimedia/Dvyjones) |
| 07:51.29 | dvyjones | Anyone working on a HTC Pharos porting? |
| 07:51.48 | tmzt | is that similar to something else? |
| 07:52.20 | dvyjones | HTC Pharos == HTC P3470, I think it uses a lot of the same chipsets as some other devices. |
| 07:52.47 | tmzt | omap? |
| 07:52.52 | BruteSource | tmzt isnt there some work for pharos? |
| 07:52.59 | BruteSource | i believe its msm |
| 07:53.02 | dvyjones | It has a TI OMAP 850 processor. |
| 07:53.13 | BruteSource | aw |
| 07:53.19 | BruteSource | welcome to hell |
| 07:53.26 | dvyjones | checks |
| 07:53.49 | BruteSource | if its omap850 im your friend |
| 07:54.02 | dvyjones | Processor: OMAP850-201MHz |
| 07:54.25 | tmzt | fun, have you tried a wizard kernel? |
| 07:54.30 | BruteSource | cause we happen to be developing android on omap850 right now and have alot of it working just no radio |
| 07:54.32 | dvyjones | Omap850 isn't working very good? |
| 07:54.39 | dvyjones | :D |
| 07:54.45 | BruteSource | well when i say we i mean penguinz |
| 07:55.20 | tmzt | wizard is farest along |
| 07:55.34 | BruteSource | youll need to get some kind of kernel runing in the meantime, best to try linwizard |
| 07:55.39 | dvyjones | The Pharos also has a WLAN chip according to XDA-Devs, but it's deactivated in the ROM, or something like that. Is it possible to get it working on android? |
| 07:55.46 | tmzt | can't get the page right now, what is it touchscreen/keyboard? |
| 07:55.48 | BruteSource | tmzt he is looking for android |
| 07:56.07 | BruteSource | all omaps have that second core |
| 07:56.23 | BruteSource | all omap850's |
| 07:56.32 | dvyjones | justs downloaded the source for android :P |
| 07:56.37 | tmzt | the work penguinz did will be helpful getting android to work, but you need the kernel working first |
| 07:56.55 | BruteSource | yes so try linwizard |
| 07:57.12 | BruteSource | probably will need to patch it for your fb and keypad first |
| 07:57.13 | dvyjones | If it works on first try, I'm lucky? :P |
| 07:57.31 | tmzt | yeah, I would start with the miknix.homelinux.com .zip/.tar.gz and try booting that |
| 07:57.41 | BruteSource | yes then you will have exact lcd and keymap as wizard |
| 07:57.43 | tmzt | it might need changes to omapfb to work, though |
| 07:58.01 | BruteSource | but i doubt ya do |
| 07:58.02 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d87cda7.pool.einsundeins.de) |
| 07:58.28 | tmzt | BruteSource: you still need tty for android, and then a ril |
| 07:58.41 | BruteSource | tmzt for what? |
| 07:58.45 | BruteSource | its working now |
| 07:58.51 | tmzt | phone/network |
| 07:58.51 | BruteSource | except radio |
| 07:58.56 | dvyjones | Hmm... |
| 07:59.05 | BruteSource | ya well i never said we had radio |
| 07:59.22 | dvyjones | Radio = FM or Phone/Bluetooth/WLAN? |
| 07:59.28 | tmzt | phone |
| 07:59.29 | BruteSource | phone |
| 07:59.34 | dvyjones | Ok. |
| 07:59.44 | tmzt | <PROTECTED> |
| 07:59.47 | BruteSource | tmzt when did i say we had phone? |
| 07:59.59 | BruteSource | ya see the no radio |
| 08:00.01 | tmzt | you didn't |
| 08:00.19 | BruteSource | so why would you even mention that? |
| 08:00.36 | tmzt | I am just saying you will need to get the tty working for android same as anything else, but you also need to implement a ril |
| 08:00.47 | dvyjones | Any ways to transfer files from an ubuntu box to a windows mobile 6.1? |
| 08:00.58 | tmzt | synce-hal |
| 08:01.03 | BruteSource | i know that, why would you tell me something i already know? |
| 08:01.40 | dvyjones | tmzt: Where do I get that? |
| 08:01.55 | BruteSource | dvyjones there some threads on the xda forums that will be very helpful |
| 08:02.03 | tmzt | the address I gave you |
| 08:02.23 | tmzt | wait, you mean tty/ril, those aren't done yet for omap850 |
| 08:02.26 | dvyjones | tmzt: You didn't give me an adress... |
| 08:02.35 | tmzt | yeah, I would start with the miknix.homelinux.com .zip/.tar.gz and try booting that |
| 08:02.49 | tmzt | http://miknix.homelinux.com |
| 08:04.01 | BruteSource | he did give you that address earlier lol |
| 08:04.13 | tmzt | he missed it |
| 08:04.42 | tmzt | I don't have the exact url anyway, will have to look it up again |
| 08:04.50 | dvyjones | looks up in his logs |
| 08:05.43 | parmaster | synce is your friend |
| 08:06.01 | dvyjones | Does SynCE work with WM6? |
| 08:06.01 | tmzt | or your worst enemy, if you have my phone |
| 08:06.17 | dvyjones | thinks he read that WM6 is unsupported somewhere. |
| 08:06.18 | parmaster | synce and kdesync |
| 08:06.27 | tmzt | it should be now |
| 08:06.43 | tmzt | does that use SyncEngine? |
| 08:07.03 | parmaster | it requires synce be installed |
| 08:07.18 | tmzt | but you really need to get a rapi connection, then you can synce-pcp files |
| 08:07.25 | tmzt | what ubuntu is it? |
| 08:10.21 | dvyjones | Ubuntu Hardy Heron |
| 08:10.34 | tmzt | oh, so you want odccm |
| 08:10.36 | parmaster | ALoGeNo: hahah i loaded acx just for the heck of it on ba |
| 08:10.47 | parmaster | it crashed within two minutes |
| 08:11.03 | ALoGeNo | xd |
| 08:11.17 | ALoGeNo | yeah it is natural for me :) |
| 08:11.20 | dvyjones | Shouldd odccm be in the package repository? |
| 08:11.22 | BruteSource | hardy heron is latest stable? |
| 08:11.56 | tmzt | odccm or synce-odccm should be |
| 08:13.54 | dvyjones | No synce-odccm, only synce-dccm |
| 08:14.08 | tmzt | that's not for wm5+ |
| 08:14.19 | tmzt | no oddcm? |
| 08:14.23 | tmzt | odccm |
| 08:14.52 | dvyjones | Not odccm either |
| 08:15.02 | dvyjones | search |
| 08:15.04 | dvyjones | es |
| 08:15.08 | tmzt | you have universe/multiverse? |
| 08:15.35 | dvyjones | Think so, one sec and I'll check |
| 08:16.10 | dvyjones | Yes, I have both universe and multiverse. |
| 08:17.08 | parmaster | this is sad, my sim isn't working for whatever reason in gomunicator now... there is no set up for gprs ... i'll have to put it in manually by hand with AT commands.. |
| 08:17.36 | parmaster | acx is a joke |
| 08:18.07 | parmaster | the phone seems like it had better functionality on the older distro |
| 08:18.19 | tmzt | what where/are you using? |
| 08:18.27 | parmaster | this is for the ba |
| 08:18.55 | tmzt | I mean distro? |
| 08:19.02 | parmaster | i'm using the current build from oe of angstrom with gpe |
| 08:19.17 | tmzt | oh, same kernel? |
| 08:19.23 | parmaster | newer |
| 08:19.28 | tmzt | version? |
| 08:19.31 | parmaster | 21hh20 is newer |
| 08:20.17 | parmaster | my only net connection is tethered usb... really sad. |
| 08:20.41 | parmaster | guess i'll have to work on getting the gprs channel up with AT commands |
| 08:21.01 | parmaster | if that even works anymore |
| 08:21.48 | parmaster | tmzt what phone(s) do you have |
| 08:22.14 | tmzt | moto q is my only smartphone. I have mp900c which is a handheld pc |
| 08:22.41 | parmaster | ah ok |
| 08:22.58 | parmaster | seems like the universal and blueangel are the farthest along |
| 08:23.26 | parmaster | i'm interested to see how things go with the newer phones |
| 08:23.29 | tmzt | they are still on older kernels though, but the phone is supposed to work |
| 08:23.55 | tmzt | http://dev.openbossa.org/trac/mamona/browser/packages/linux/linux-rp-2.6.23%2B2.6.24-rc0%2Bgit/htcuni.patch |
| 08:23.58 | parmaster | yeah, i'm thinking that my provider is whats wrong |
| 08:23.59 | tmzt | http://dev.openbossa.org/trac/mamona/browser/packages/linux/linux-rp-2.6.23%2B2.6.24-rc0%2Bgit/htcuni-acx.patch |
| 08:24.49 | parmaster | i had tmobile before and it worked fine |
| 08:25.02 | parmaster | it ws crackly sure, but it worked |
| 08:25.13 | tmzt | you can list networks? |
| 08:25.24 | parmaster | and you could fry small animals with the microwaves if you held it the right way |
| 08:26.19 | parmaster | nah, you can't list network |
| 08:26.27 | parmaster | my sim was tmobile before |
| 08:26.34 | parmaster | this one is at&t (cingular) |
| 08:27.27 | tmzt | yeah, I was thinking maybe you had to select the network with at commands, like a nokia phone would automatically |
| 08:27.41 | parmaster | nah |
| 08:28.22 | ALoGeNo | hey tmzt that links not work forme :( |
| 08:28.57 | ALoGeNo | maybe by the %2B |
| 08:29.08 | tmzt | search "poky 2.6.23 git" |
| 08:29.14 | ALoGeNo | oki |
| 08:29.43 | tmzt | defconfig-qemux86, then goto parent/up link |
| 08:31.24 | tmzt | dvyjones: if you can get that copied, but it boots with blank screen, we can get the omapfb values here sometime |
| 08:31.59 | dvyjones | is kinda confused on what to do now :P |
| 08:32.09 | tmzt | thttpd ? |
| 08:45.04 | *** join/#htc-linux LanceHaig (i=4e696aee@foresight/member/lhaig) |
| 08:46.16 | *** join/#htc-linux ulaas (n=ulaas@88.253.14.253) |
| 08:48.48 | parmaster | sleep, sleeping is what to do now |
| 08:48.50 | parmaster | nite |
| 08:51.15 | ALoGeNo | nn |
| 08:55.16 | *** join/#htc-linux sir0x (n=sirox@91-67-142-232-dynip.superkabel.de) |
| 08:55.38 | sir0x | good morning folks |
| 08:55.50 | dvyjones | G'Day sir0x |
| 08:55.59 | sir0x | :) |
| 08:59.43 | sir0x | is there already a repos for the diamond/raphael kernel ? |
| 09:14.38 | *** join/#htc-linux marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 09:27.00 | *** join/#htc-linux BabelO (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
| 09:48.54 | *** join/#htc-linux cr2_ (n=konversa@crpl6.physik.uni-wuppertal.de) |
| 09:51.59 | dvyjones | BruteSource: You there? |
| 09:52.23 | dvyjones | What should I do when linwizard shows "wizard login: _"? |
| 09:59.26 | *** join/#htc-linux nebi (n=nebi@c-498fe253.02-145-7570701.cust.bredbandsbolaget.se) |
| 10:03.08 | *** join/#htc-linux dante_ (n=dante@net-93-148-251-28.t2.dsl.vodafone.it) |
| 10:04.28 | *** join/#htc-linux alo (n=QUAKEIII@118.Red-83-49-136.dynamicIP.rima-tde.net) |
| 10:10.09 | dvyjones | Anyone here? |
| 10:14.46 | ALoGeNo | hi dvyjones |
| 10:16.00 | *** join/#htc-linux diogene31 (n=rj@mur31-2-82-243-122-54.fbx.proxad.net) |
| 10:16.21 | dvyjones | Hi ALoGeNo |
| 10:28.13 | *** join/#htc-linux alo (n=QUAKEIII@118.Red-83-49-136.dynamicIP.rima-tde.net) |
| 10:39.55 | *** join/#htc-linux nebi (n=nebi@c-498fe253.02-145-7570701.cust.bredbandsbolaget.se) |
| 10:47.44 | *** join/#htc-linux chab7 (n=kvirc@183-17-193.ip.adsl.hu) |
| 11:41.08 | *** join/#htc-linux N3m3515 (n=nembnc@p5B09DF40.dip.t-dialin.net) |
| 11:42.01 | *** join/#htc-linux N3m3515| (n=nembnc@p5B09DFAE.dip.t-dialin.net) |
| 11:42.07 | *** join/#htc-linux tcccp (i=hey@223.66.238.89.arpa-addr.in) |
| 11:54.00 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 12:01.29 | *** join/#htc-linux Dvyjones (i=c15a3953@wikimedia/Dvyjones) |
| 12:05.35 | *** join/#htc-linux tcccp (n=hey@223.66.238.89.arpa-addr.in) |
| 12:06.05 | Dvyjones | Can someone help me porting linux to a new device? |
| 12:06.13 | Dvyjones | Or point me to some guides? |
| 12:11.10 | *** join/#htc-linux tcccp (n=hey@223.66.238.89.arpa-addr.in) |
| 12:11.37 | *** join/#htc-linux Zinbolic (n=nnscript@0x57344a18.vgnxx3.dynamic.dsl.tele.dk) |
| 12:13.02 | parmaster | hi dvyjones |
| 12:13.08 | parmaster | what device do you have? |
| 12:13.37 | parmaster | it sounded like you already got haret |
| 12:13.46 | parmaster | just follow the documentation |
| 12:14.10 | Dvyjones | HTC Pharos / P3470 |
| 12:14.18 | Dvyjones | parmaster: What documentation? :P |
| 12:18.58 | Dvyjones | Brb |
| 12:19.40 | *** join/#htc-linux dvyjones (n=dvyjones@wikimedia/Dvyjones) |
| 12:19.43 | dvyjones | Back :P |
| 12:21.21 | *** join/#htc-linux N3m3515 (n=nembnc@p5B09DFAE.dip.t-dialin.net) |
| 12:23.05 | parmaster | oh its an omap85- |
| 12:23.09 | parmaster | oh its an omap850 |
| 12:23.52 | *** join/#htc-linux N3m3515 (n=nembnc@p5B09DFAE.dip.t-dialin.net) |
| 12:25.31 | dvyjones | Yep, :P |
| 12:25.38 | parmaster | there are some folks here working on the HTC_Excalibur |
| 12:26.16 | dvyjones | The LinWizard works (except for the keyboard (no hard keyboard on Pharos)) |
| 12:27.43 | BabelO | dvyjones: you have also my htc artemis kernel at git.linuxtogo.org |
| 12:28.32 | parmaster | yeah thats the best idea |
| 12:29.19 | dvyjones | How do I test that? |
| 12:30.28 | BabelO | dvyjones: you can test with that http://www.linuxtogo.org/~htcpxa/htcartemis/qtopia/ |
| 12:31.20 | BabelO | dvyjones: you have to compile yuor own kernel before |
| 12:31.37 | BabelO | else it cant boot this image as it does not detect artemis |
| 12:50.54 | druidu | hello Gilles! ça va? j'éspére que ton voyage en Iran c'est bien passé.. |
| 12:50.55 | druidu | j'ai bien passé un magnifique work&sightseeing sejour en Cannes et j'ai bien exercé mon français en travaillant comme hôtesse d'accueil pour le congres audiovisuel au Palais de Festivals.. jâai passé des forte agréable journées en compagnie de gens très intéressants, beaucoup d'événements et fêtes mondaines, chill-out fêtes sur le plage, au vrai tout le gratin...olalaaa |
| 12:50.55 | druidu | maintenant je suis en Bucarest pour quelques jours, la cité est magnifique, il fait beau.. je me trouve excellent chez mes parents:) |
| 12:50.55 | druidu | Ã bientot |
| 12:50.57 | druidu | buon weekend |
| 12:51.12 | druidu | whoops, fuck... wrong paste |
| 12:51.13 | druidu | :D |
| 12:51.15 | NetRipper | rofl |
| 12:51.49 | druidu | somebody left that in my clipboard |
| 12:51.50 | druidu | :) |
| 12:53.48 | druidu | NetRipper: can I draw on the screen in the kernel? like do a quick hack and implement a touchscreen driver + onscreen keyb? |
| 12:54.42 | NetRipper | druidu, you should be able yes, i think you can just draw to the memory addresses |
| 12:55.19 | druidu | I can put the keyboard near tux :) |
| 12:55.38 | NetRipper | the driver should update the screen (it also updates the blinking cursor) |
| 12:56.05 | druidu | true, true |
| 12:56.32 | NetRipper | im still trying to get usb ethernet working |
| 12:56.40 | NetRipper | no luck so far |
| 13:08.48 | druidu | usb ethernet? and what cable do you use for that? |
| 13:09.14 | *** join/#htc-linux Bolly (n=michael@host217-36-23-28.in-addr.btopenworld.com) |
| 13:09.23 | NetRipper | normal usb |
| 13:09.23 | Bolly | hey all |
| 13:09.35 | Bolly | i have been given a bomb shell at work and thought maybe one of you might know |
| 13:09.46 | druidu | I guess a simple one-way pc=>phone usb serial connection would be enough, just to send chars and output to the screen |
| 13:09.49 | Bolly | need to clone a bunch of pocketpcs and was wondering if you know of any tools for doing this |
| 13:11.10 | NetRipper | druidu, i'm getting the usb0 interface on my device, just my linux laptop wont recognize it |
| 13:12.12 | NetRipper | druidu, i am able to get a ttyUSB0 on my laptop, but in that case the ttyUSB0 isnt working on the phone :p somehow i only get one side on each method ;) |
| 13:14.08 | druidu | haha, weird |
| 13:36.25 | NetRipper | druidu, do you know if devfs is still available in the 2.6.25+? |
| 13:43.31 | NetRipper | guess not |
| 13:43.31 | NetRipper | :) |
| 13:46.59 | druidu | dunno, why would they take it out? |
| 13:47.00 | druidu | udev ? |
| 13:47.30 | NetRipper | devfs was deprecated because it was kernelspace |
| 13:47.37 | NetRipper | udev is userspace, but then i need to compile it:p |
| 13:48.37 | druidu | btw, can I ioremap some area without delcaring it first in msm_io_desc table in arch/arm/mach/msm/io.c ? |
| 13:50.25 | NetRipper | i believe so |
| 13:57.29 | *** join/#htc-linux Tinyboom (n=nahh@72.84-49-71.nextgentel.com) |
| 13:57.36 | druidu | btw, does android initrd use udev? |
| 14:00.03 | NetRipper | dont know |
| 14:00.25 | NetRipper | if you know the nodes up front then you dont need udev/devfs |
| 14:00.25 | NetRipper | :) |
| 14:03.23 | *** join/#htc-linux ltxda0 (n=anon@unaffiliated/ltxda) |
| 14:09.03 | NetRipper | i get two serial interfaces on my laptop now |
| 14:09.14 | NetRipper | lets see if i can get one of them at phone |
| 14:09.15 | NetRipper | :p |
| 14:10.33 | NetRipper | too bad |
| 14:18.11 | NetRipper | swetland, how did you use that ether.c usb function? i get it on the device-side, but how do i use it from my linux host? |
| 14:20.08 | *** join/#htc-linux tuxydo (n=joop@ip5455c588.speed.planet.nl) |
| 14:20.33 | druidu | you probably need a driver that gives you an ethernet interface and communicates with the phone via usb... |
| 14:21.04 | NetRipper | yes |
| 14:21.06 | NetRipper | usbnet |
| 14:21.33 | NetRipper | swetland, did you guys modify the usbnet module for it to work? |
| 14:22.57 | NetRipper | i see im running 2.6.24 so perhaps there are changes that i dont have |
| 14:23.01 | NetRipper | on my host |
| 14:24.54 | druidu | can't get the touchscreen interrupt to fire... |
| 14:29.42 | *** join/#htc-linux ulaas (n=ulaas@88.253.5.7) |
| 14:29.56 | druidu | cr2_ you around? |
| 14:37.56 | *** join/#htc-linux datachaos (n=datachao@189.27.191.132.adsl.gvt.net.br) |
| 14:41.49 | ulaas | druidu: hey any good news for raphael/diamond? |
| 14:44.35 | druidu | working on a touchscreen driver and then an onscreen-keyboard, so I can type in the shell I got :) |
| 14:48.27 | *** join/#htc-linux dvyjones_ (n=dvyjones@ool-4571236c.dyn.optonline.net) |
| 15:01.02 | *** join/#htc-linux LanceHaig (i=4e696aee@foresight/member/lhaig) |
| 15:01.27 | *** join/#htc-linux miknix (n=miknix@gentoo/developer/miknix) |
| 15:04.07 | ulaas | druidu: oh is there a shell already? did you manage to boot al the way? |
| 15:14.06 | druidu | yep, we have a shell, NetRipper made an initrd with a busybox |
| 15:17.07 | ulaas | are they downloadable? wiki? links? |
| 15:17.13 | *** join/#htc-linux marmotta (n=skodde@unaffiliated/skodde) |
| 15:17.32 | NetRipper | ulaas, not yet |
| 15:17.48 | druidu | it's not useful anyway, you can just type 3 keys :)) |
| 15:17.54 | druidu | yet |
| 15:17.55 | druidu | :D |
| 15:18.27 | druidu | NetRipper : could it be that the registers and interrupt for the touchscreen cr2 told me about are just what the windows touchscreen driver does? |
| 15:19.01 | NetRipper | druidu, should be valid for linux too, but it may need initializing before interrupts are fired |
| 15:19.26 | ulaas | druidu: i see. i am a bit linux guy myself as well. would you mind to pass me the .config of yours so far? |
| 15:20.27 | NetRipper | ulaas, i think im going to make a patch soon, with a small howto for developers |
| 15:20.49 | druidu | it's msm_defconfig mostly, with some stuff disabled but won't boot as the kernel needs a few patches |
| 15:21.25 | ulaas | NetRipper: great. xda-dev to follow? |
| 15:21.40 | NetRipper | i actually want to get a git up and running... we can do that at linuxtogo but i have no experience setting it up |
| 15:21.57 | *** join/#htc-linux BabelO (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
| 15:22.24 | NetRipper | ulaas, what do you mean? |
| 15:23.10 | ulaas | NetRipper: I mean how can i check if you have already posted the patch and the howto? |
| 15:23.54 | NetRipper | ulaas, it'll be on RaphaelLinux wiki page |
| 15:23.57 | ulaas | NetRipper: asking here is one option. but i would not like to bug you all the time. |
| 15:24.04 | ulaas | NetRipper: fair enough |
| 15:24.09 | ulaas | NetRipper: thanx |
| 15:24.15 | NetRipper | we're posting all progress on there, and probably update the diamond linux thread as well |
| 15:34.19 | *** join/#htc-linux dvyjones_ (n=dvyjones@ool-4571236c.dyn.optonline.net) |
| 15:36.29 | *** join/#htc-linux fnord (n=fnord@24-151-90-116.static.nwtn.ct.charter.com) |
| 15:36.45 | NetRipper | druidu, if i boot with mtype 1440, it doesnt get anywhere |
| 15:36.50 | NetRipper | druidu, at least, no console |
| 15:38.34 | NetRipper | druidu, it switches runtime right? i dont have to recompile if i want to use another mtype? |
| 15:46.16 | NetRipper | druidu, i guess you patched more things in the kernel to make it work with trout? |
| 15:54.06 | *** join/#htc-linux fnord (n=fnord@24-151-90-116.static.nwtn.ct.charter.com) |
| 16:21.11 | *** join/#htc-linux LunohoD_ (n=alex@e180065126.adsl.alicedsl.de) |
| 16:23.05 | *** join/#htc-linux FRITZ (n=FRITZ@189-19-168-237.dsl.telesp.net.br) |
| 16:34.10 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 16:42.25 | *** join/#htc-linux kiozen (n=oeichler@rgnb-5d87cda7.pool.einsundeins.de) |
| 16:50.39 | *** join/#htc-linux dcordes (n=jack@unaffiliated/dcordes) |
| 17:04.27 | *** join/#htc-linux cheenky (n=cheeny@pool-71-246-39-83.lsanca.fios.verizon.net) |
| 17:09.35 | diogene31 | is away: Working |
| 17:17.50 | sir0x | i dont't get the kernel run on my diamond, i got the g1-kernel with "git clone git://git.android.com/kernel.git ; cd kernel ; git checkout origin/android-msm-htc-2.6.25", i patched the source with druidus framebuffer-driver and maked it and i used the haret of netrippers side |
| 17:18.02 | sir0x | did i forgett something ? |
| 17:22.54 | ali1234 | BabelO: did you manage to get the RTC to work on Artemis? |
| 17:30.13 | *** join/#htc-linux ahmeni (n=ahmeni@unaffiliated/ahmeni) |
| 17:34.08 | *** join/#htc-linux Kalemas (i=ejabberd@jabbus.org) |
| 17:35.04 | *** part/#htc-linux Kalemas (i=ejabberd@jabbus.org) |
| 17:38.05 | *** join/#htc-linux tuxydo (n=joop@ip5455c588.speed.planet.nl) |
| 17:39.14 | miknix | hey BabelO |
| 17:39.26 | miknix | how different is this one from your artemis? http://pdadb.net/index.php?m=specs&id=1042&view=1 |
| 17:42.13 | druidu | NetRipper : if you compiled it with Trout support there's no need to recompile, I did patch quite a lot of things... mostly disabled all the proc_comm stuff |
| 17:42.56 | druidu | check out patch http://octav.oricum.ro/android/trout.patch (doesn't include your irq.c patch and also comments out the annoying irq error in drivers/video/msm/mdp.c |
| 17:43.21 | *** join/#htc-linux BabelO_ (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
| 17:45.14 | druidu | sir0x: be sure to include NetRipper's arch/arm/mach-msm/irq.c patch (which disables INT_DEBUG_TIMER_EXP in msm_init_irq) |
| 17:45.57 | druidu | and specify the correct mtype in default.txt (either trout - 1439 or halibut - 1440) |
| 18:03.51 | druidu | cr2_: managed to get data from touchscreen but only by continous polling, irq doesn't fire and it seems like it's not enabled by stats / ctl registers |
| 18:12.53 | dvyjones | Any Linux Porting projects for the Artemis? |
| 18:15.27 | dvyjones | NEvermind, found it... |
| 18:18.01 | BabelO_ | ali1234: i don't remember well, but each time i try it freeze the device |
| 18:18.19 | ali1234 | BabelO_: really? it freezes? that's odd. i just got it working on wizard :) |
| 18:18.37 | BabelO_ | ali1234: it freeze after few minutes |
| 18:18.39 | ali1234 | BabelO_: using the rtc-omap.c - but the registers are 8 bits not 32 bits |
| 18:18.53 | BabelO_ | maybe it works with latest |
| 18:19.11 | ali1234 | BabelO_: well my wizard has not frozen yet... been running since about half an hour |
| 18:19.23 | BabelO_ | ok |
| 18:19.45 | ali1234 | BabelO_: i thought perhaps you might know why the regs are 8 bits... it looks like they should be 32 according to all i have read about them |
| 18:20.55 | *** join/#htc-linux BruteSource (n=BruteSou@m470e36d0.tmodns.net) |
| 18:21.48 | dvyjones | Hi BruteSource |
| 18:22.05 | dvyjones | found out Pharos == Artemis except for the FM Radio :P |
| 18:22.22 | dvyjones | BruteSource: So I'm trying the Artemis image... |
| 18:23.03 | BruteSource | nice do they have phone radio working6 |
| 18:23.13 | dvyjones | When running Qtopia-artemis I get this error: "Undefined MTYPE" |
| 18:23.19 | dvyjones | Any idea why? |
| 18:23.30 | ali1234 | BruteSource: artemis kernel uses the same exact driver as wizard |
| 18:23.42 | ali1234 | (for gsm) |
| 18:23.56 | dvyjones | Comparision of Artemis vs. Pharos: http://pdadb.net/index.php?m=pdacomparer&id1=1042&id2=619 |
| 18:24.40 | ali1234 | dvyjones: i think you'll find the fm radio is part of the bluetooth chip... which means you probably have a totally different bt chip to artemis |
| 18:25.10 | BruteSource | artemis has audio? |
| 18:26.11 | dvyjones | Anyone knows why I get this error un running Qtopia-artemis: "undefined MTYPE" (Qtopia has same icon as haret, so may be the same software...) |
| 18:26.21 | ali1234 | having said that, wizard and artemis have the same bt, but wizard has no radio that i know of |
| 18:26.55 | ali1234 | dvyjones: qtopia image is probably using an older version of haret that doesn't recognise your cpu |
| 18:27.01 | *** join/#htc-linux xcs (n=xcs@70.16.79.98) |
| 18:27.04 | dvyjones | :( |
| 18:27.14 | dvyjones | ali1234: Any idea how to fix it? :P |
| 18:27.31 | ali1234 | dvyjones: not without recompiling the whole image no. it isn;t a fatal error is it? |
| 18:28.10 | BruteSource | well apparently when they were developing android at google they tested for an omap850 device and maybe had working phone; sms, gprs and mms.. so if they publish that, it would be helpful |
| 18:28.25 | dvyjones | ali1234: It doesn't boot, I just get that Error dialogue, press the X, and nothing happen... |
| 18:28.29 | ahmeni | hrm, trying to boot android on an htc s640 and am getting a "Failed to lock 5387 pages (code 998)", haret is running in system mode |
| 18:28.51 | ali1234 | ahmeni: not enough free program memory... |
| 18:29.21 | BruteSource | ahmeni what kernel are you using? |
| 18:29.54 | ahmeni | ahh, yeah, free memory, alloctest 1000 and alloctest 2000 pass, i'll see what I can free up. |
| 18:30.00 | ali1234 | ahmeni: 5000 pages = about 20 mb... |
| 18:32.26 | *** join/#htc-linux BHSPitLappy (n=BHSPitLa@unaffiliated/bhspitmonkey) |
| 18:33.15 | dvyjones | No hope for me then? |
| 18:33.39 | dvyjones | BruteSource: Btw, Wizard rom runs perfectly to the "wizard login:" part, I can't type anything :P |
| 18:33.52 | dvyjones | S/Wizard rom/Linwizard/ |
| 18:34.06 | BruteSource | you need a keymap |
| 18:34.16 | ali1234 | BruteSource: he has no keyboard |
| 18:34.29 | ali1234 | dvyjones: plug in to usb, networking is enabled |
| 18:34.30 | BruteSource | oh |
| 18:34.44 | dvyjones | ali1234: How do I do that on linux? |
| 18:35.00 | BruteSource | just connect a usb cable |
| 18:35.11 | ali1234 | dvyjones: just plug it in and module cdc_ether should load automatically |
| 18:35.20 | dvyjones | ali1234: Then? |
| 18:35.40 | ali1234 | dvyjones: then configure the pc end as 10.100.0.2, the phone is 10.100.0.1. telnet to it |
| 18:35.45 | BruteSource | the you should have a network connection just find out the ip nd telnet in |
| 18:36.09 | dvyjones | ali1234: Sorry for bein a n00b, but how do I configure the pc end? |
| 18:36.21 | ali1234 | dvyjones: sudo ifconfig usb0 10.100.0.2 |
| 18:39.37 | BruteSource | dos gpe even have an onscreen kb? |
| 18:39.45 | dvyjones | telnet 10.100.0.1 |
| 18:39.45 | dvyjones | Trying 10.100.0.1... |
| 18:39.47 | dvyjones | telnet: Unable to connect to remote host: Connection refused |
| 18:40.02 | dvyjones | Is there a port I need to use? :P |
| 18:40.13 | BruteSource | i know android doesnt |
| 18:40.25 | BruteSource | so whats the point lol? |
| 18:40.32 | dvyjones | BruteSource: Android is getting one in Q1 2009 |
| 18:40.57 | BruteSource | where did you hear that? |
| 18:41.19 | BruteSource | the next android device is a motorola with a kb |
| 18:41.48 | dvyjones | BruteSource: http://source.android.com/roadmap |
| 18:42.04 | dvyjones | ali1234: Any ideas why it won't connect? |
| 18:42.14 | BruteSource | aww cool |
| 18:42.36 | BruteSource | can you ping it? |
| 18:43.09 | dvyjones | BruteSource: Yup |
| 18:43.32 | BruteSource | guess telnetd isnt running |
| 18:43.52 | BruteSource | did ya try 22 and 23? |
| 18:43.54 | dvyjones | BruteSource: Any ways to fix that? |
| 18:44.14 | dvyjones | BruteSource: Neither works |
| 18:44.47 | BruteSource | i dont know, i mean you could hack up the userspace i guess |
| 18:44.58 | *** join/#htc-linux Petithomme (n=sebastie@mon75-16-88-170-211-119.fbx.proxad.net) |
| 18:45.12 | BruteSource | but linwizard should have it all enabled |
| 18:45.20 | NetRipper | druidu, using halibut i dont have to comment out all that stuff, do you have a specific reason of using Trout over Halibut? |
| 18:45.59 | dvyjones | Upon plugging in the USB cable, this pops out on the display: "udc: USB reset done, gadget ether" "udc: USB reset done, gadget ether", "udc: USB reset done, gadget ether" "usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet" |
| 18:46.29 | *** join/#htc-linux BabelO_ (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
| 18:46.44 | dvyjones | is clueless :P |
| 18:46.47 | BruteSource | what does ifconfig say? |
| 18:47.16 | ahmeni | Ugh. Freeing memory on this device is a pain. |
| 18:47.32 | dvyjones | BruteSource: http://paste.cluenet.org/1080 |
| 18:47.48 | BabelO_ | dvyjones: you have to compile your one kernel and get haret + default.txt to force the MTYPE |
| 18:48.01 | dvyjones | BabelO_: Not using that anymore :P |
| 18:48.03 | BruteSource | im on my device and i cant click linjs |
| 18:48.06 | BruteSource | links |
| 18:48.31 | dvyjones | BruteSource: I can PM it to you... |
| 18:48.48 | BruteSource | just does it list anything about t connection? |
| 18:49.27 | BabelO_ | ali1234: BT is not related to FM Radio it is not the same chip |
| 18:49.52 | ali1234 | dvyjones: it looks like telnetd is not running... |
| 18:49.54 | BruteSource | do ifconfig eth0 |
| 18:50.15 | dvyjones | BruteSource: Why eth0? |
| 18:50.22 | BruteSource | why would telnetd not be running? its linwizard |
| 18:51.01 | BruteSource | just wanted to compare |
| 18:51.16 | dvyjones | BruteSource: I'm connected to the internet using wlan0... |
| 18:51.51 | BabelO_ | dvyjones: i can make you a kernel for artemis image |
| 18:52.46 | dvyjones | Babel0_: I'm on Pharos, not Artemis (although they are as close to being the same as possible). But if you think that would work, I would be delighted if you did so... |
| 18:53.17 | BruteSource | ya i can see that now lol |
| 18:55.31 | BruteSource | linwizard is further along though |
| 18:55.40 | BruteSource | so it will be more work in long run |
| 18:56.20 | dvyjones | BruteSource: Who are you talking too? |
| 18:56.32 | Petithomme | Hi there, just popping in to show support to anyone working on booting Android on Kaiser ^^ |
| 18:56.47 | BruteSource | you lol |
| 18:57.20 | dvyjones | BruteSource: Linwizard > more work than Haret Artemis image? |
| 18:58.03 | BruteSource | no vice versa |
| 18:58.13 | dvyjones | Oh, I see now :P |
| 18:58.18 | BruteSource | well from what i have heard |
| 18:58.31 | dvyjones | just needs to be able to telnet into linwizard :P |
| 18:58.40 | BruteSource | but i havent personally used an artemis image |
| 18:58.51 | dvyjones | BruteSource: Any other ideas? |
| 18:59.05 | BruteSource | ya i dont know why telnetd wouldnt be working |
| 18:59.23 | BruteSource | are you using latest linwizard? |
| 18:59.36 | BruteSource | wel 0.2.0 at least? |
| 18:59.47 | dvyjones | BruteSource: Downloaded it today, 0.3.0 IIRC |
| 18:59.54 | dvyjones | I mean 0.2.0 :P |
| 19:00.18 | dvyjones | Yes, it's Linwizard 0.2.0 |
| 19:00.40 | BruteSource | well ali1234 might be able to help, or maybe miknix in #linwizard |
| 19:00.55 | ali1234 | i have no clue why telnetd isn;t starting, sorry |
| 19:03.03 | *** join/#htc-linux tuxydo (n=joop@ip5455c588.speed.planet.nl) |
| 19:16.02 | *** join/#htc-linux fnord (n=fnord@24-151-90-116.static.nwtn.ct.charter.com) |
| 19:21.16 | druidu | NetRipper : halibut used to give me that panic in kmem_cache_create (not sure what was the cause / if I still get it), I thoughttrout config was closer to diamond than halibut (being made for g1) |
| 19:22.26 | druidu | basicly, once we figure out how to make proc_comm/smd work, there will be nothing to comment (and also, the powerup sequences for the panel & stuff) |
| 19:23.38 | *** join/#htc-linux BabelO__ (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
| 19:30.50 | ahmeni | sweet, got the damn thing booting. now just to find a way to get keyboard input to work so I can login |
| 19:34.23 | *** join/#htc-linux Kalemas (i=ejabberd@jabbus.org) |
| 19:35.10 | *** join/#htc-linux ulaas (n=ulaas@88.253.7.82) |
| 19:38.32 | *** join/#htc-linux surgex0 (i=surge@pool-98-118-165-224.bflony.fios.verizon.net) |
| 19:40.03 | *** join/#htc-linux tuxydo (n=joop@ip5455c588.speed.planet.nl) |
| 19:46.37 | *** join/#htc-linux keerttttt (n=keertttt@ip72-209-173-82.adsl2.static.versatel.nl) |
| 19:48.13 | *** join/#htc-linux Chicago (n=Chicago@c-98-223-62-201.hsd1.in.comcast.net) |
| 19:50.30 | sir0x | NetRipper: druidu wrotes something about a irq.c patch wicht disables an debug-timer can i get it from you ? |
| 19:51.48 | *** join/#htc-linux PocketIRC (n=pocketir@94.163.13.92) |
| 19:57.14 | NetRipper | sir0x, erm, yes, somewhere |
| 19:58.46 | sir0x | NetRipper: lol ok, do you have an link for me ? |
| 19:59.12 | NetRipper | sir0x, http://pastebin.com/m47ca0e93 |
| 19:59.14 | NetRipper | yes i was looking |
| 19:59.15 | NetRipper | ;) |
| 19:59.24 | Chicago | Hello |
| 19:59.44 | sir0x | NetRipper: thx :) |
| 20:00.30 | *** join/#htc-linux pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 20:02.53 | *** join/#htc-linux LanceHaig (i=4e696aee@foresight/member/lhaig) |
| 20:03.34 | *** part/#htc-linux Kalemas (i=ejabberd@jabbus.org) |
| 20:03.44 | *** join/#htc-linux Kalemas (i=ejabberd@jabbus.org) |
| 20:03.48 | *** part/#htc-linux Kalemas (i=ejabberd@jabbus.org) |
| 20:03.55 | *** join/#htc-linux Kalemas (i=ejabberd@jabbus.org) |
| 20:06.27 | *** join/#htc-linux szsoftware (n=sven@e178223233.adsl.alicedsl.de) |
| 20:06.51 | *** join/#htc-linux imfloflo (i=58b44979@gateway/web/ajax/mibbit.com/x-b7200fecbd320bb8) |
| 20:11.14 | sir0x | yeaaah thx netripper, linux on my diamond |
| 20:13.03 | sir0x | in the next days i will write an tutorial howto get the kernel running on the diamond |
| 20:13.43 | sir0x | netripper: it's important to use your hret, becaus he doesn't disable the irqs on booting right !? |
| 20:14.59 | ali1234 | BabelO: so did artemis actually get the correct time before it froze? |
| 20:16.24 | BabelO | ali1234: yes |
| 20:16.40 | *** part/#htc-linux LanceHaig (i=4e696aee@foresight/member/lhaig) |
| 20:18.26 | ali1234 | BabelO: that's really vexing |
| 20:19.38 | Chicago | Which linux roms are there to choose from for a Titan? |
| 20:20.00 | BabelO | ali1234: i think it is same problem than on universal with the watchdog... |
| 20:20.13 | BabelO | ali1234: wm6 stuff |
| 20:21.09 | tmzt | Chicago: I belive the vogue bootkits work on titan, though you may need a different zImage to use the keyboard |
| 20:21.21 | ponicg | Chicago: there's a specific zimage for our keyboard in android |
| 20:21.21 | tmzt | Chicago: http://linuxtogo.org/~lgorris/ |
| 20:21.24 | ponicg | it works rather well |
| 20:21.44 | druidu | NetRipper: can't we use this: drivers/usb/serial/console.c ? |
| 20:21.44 | ponicg | android itself need ssome tweaing, but it's coming along nicely |
| 20:21.54 | ponicg | tmzt: there's one other link, just a sec |
| 20:22.08 | NetRipper | sir0x, the latest official haret is working fine |
| 20:22.19 | ponicg | http://wormhole.akropolys.com/htclinux/ |
| 20:22.31 | ponicg | zImage-sidebuttons works very well, with full hardware keyboard support for maps. |
| 20:22.34 | ponicg | and search and web |
| 20:22.43 | ponicg | i haven't gotten SMS to work since that needs the software keyboard up |
| 20:22.46 | tmzt | that's it, thanks |
| 20:22.49 | Chicago | ponicg: tmzt: I have nueSPL-2.47 installed. |
| 20:22.55 | ali1234 | BabelO: not the freezing, i mean that my RTC seems to work differently |
| 20:22.57 | sir0x | NetRipper: oh ok thx |
| 20:23.03 | *** join/#htc-linux cheenky (n=cheeny@pool-71-246-39-83.lsanca.fios.verizon.net) |
| 20:23.23 | tmzt | Chicago: linux currently boots from wince using a program called haret |
| 20:23.34 | tmzt | Chicago: it does not replace your rom or boot from sd right now |
| 20:23.48 | Chicago | ponicg: tmzt: What about something that does replace my rom? |
| 20:23.55 | BabelO | ali1234: why you say that ? |
| 20:24.01 | *** join/#htc-linux Spicypixel (i=Spicypix@cpc4-linc8-0-0-cust509.nott.cable.ntl.com) |
| 20:24.08 | ponicg | Chicago: I haven't noticed anything, and android definitely isn't ready for primetime yet. |
| 20:24.15 | tmzt | Chicago: an SPL might be helpful use you will probably need dutty's or another windows rom to boot with haret |
| 20:24.17 | ponicg | A few more things and it will be, but as it is now, it isn't on the Titan. |
| 20:24.34 | Chicago | Will dcd3.2.6 boot haret? |
| 20:24.36 | ali1234 | BabelO: well.. it's kind of difficult to explain... but on my rtc the registers are 1 byte long not 4 |
| 20:24.36 | ponicg | When I've been testing, i've added Haret to my startup folder |
| 20:24.51 | ponicg | so as soon as it boots, i get haret |
| 20:25.00 | ali1234 | BabelO: so in rtc-omap.c i had to change all the register definitions (divide them all by 4) |
| 20:25.23 | tmzt | Chicago: if it doesn't you'll get the can't free pages or whatever message when you try |
| 20:25.30 | ali1234 | BabelO: so eg minutes is at 0xfffb4801 not 0xfffb4804 like it should be |
| 20:25.34 | Chicago | ponicg: Where is the repository? Can I checkout the source and compile locally... in order to build my own zImage? |
| 20:25.56 | ponicg | Chicago: I'm not sure. I'm trying to get ahold of the owner of that site. |
| 20:26.01 | tmzt | I don't think the titan-sidekeys patch is in there yet |
| 20:26.19 | ponicg | yeah tmzt, did oyu see the .c file there/ |
| 20:26.22 | tmzt | you can use the vogue branch on linuxtogo.org kernel.git, but keyboard won't work |
| 20:26.25 | ponicg | GPIO on the titan is not just a single thing |
| 20:26.30 | ponicg | it's column and row |
| 20:26.31 | BabelO | ali1234: ok, but i think i do the same here |
| 20:26.46 | ponicg | it's a pretty neat way of doing things, fairly similar to how a desktop keyboard works if i understand it correctly. |
| 20:26.48 | tmzt | yeah, it should work but there is no way to come out of suspend |
| 20:26.51 | BabelO | ali1234: do you use wm6 ? and what do you set for watchdog ? |
| 20:27.19 | ponicg | hmm? the green send key wakes it up for me. |
| 20:27.28 | tmzt | with that .c file? |
| 20:27.37 | ponicg | with the zImage-sidekeys |
| 20:27.51 | ponicg | i think that .c is a few days older than the image itself. |
| 20:27.53 | tmzt | yeah, I know, he asked if he could build it |
| 20:28.05 | ali1234 | BabelO: i use WM 5.3, i dont know anything about watchdog... somebody else already wrote that bit of code |
| 20:28.10 | ponicg | oh - too many conversations at once for me:-p |
| 20:28.25 | tmzt | the zIamge-sidekeys should work with ~lgorris initrd on titan |
| 20:29.08 | Chicago | tmzt: ponicg: Which of these available downloads are for the titan? http://linuxtogo.org/~lgorris/ http://wormhole.akropolys.com/htclinux/ |
| 20:29.51 | penguinz | ali1234, would you mind putting the changes you made to omap-rtc.c on pastebin? I would appreciate it. |
| 20:30.29 | *** join/#htc-linux ulaas (n=ulaas@88.253.7.82) |
| 20:30.50 | tmzt | ulaas: what are you using for initrd? |
| 20:30.58 | ponicg | Chicago: I used the Nzo vogue file from http://it029000.massey.ac.nz/vogue/ (latest version) |
| 20:31.13 | ponicg | then used the zImage-sidekeys renamed to zImage rom that package |
| 20:31.15 | ponicg | and it worked fo rme |
| 20:31.58 | ulaas | tmzt: what makes you think that i use an initrd._ |
| 20:32.28 | tmzt | ulaas: misremembered? |
| 20:32.55 | tmzt | ponicg: are you only using android? that's all I see on dzo site |
| 20:33.01 | Chicago | ponicg: Coolness |
| 20:33.06 | ulaas | tmzt: probably. |
| 20:33.15 | ponicg | tmzt: yes. Is there something else I can/should use? |
| 20:34.11 | *** join/#htc-linux surgex (i=surge@pool-98-118-165-224.bflony.fios.verizon.net) |
| 20:35.13 | Chicago | So linux runs on top of wm6.1...? When linux runs, wm6.1 has already gone byebye? |
| 20:35.41 | ponicg | Chicago: yeah. as i understand it, haret essentially hijacks the memory, dumps windows out of memory, and loads linux/whatever you tell it to |
| 20:36.55 | *** join/#htc-linux ssapphiree (n=sapphire@ppp91-77-157-85.pppoe.mtu-net.ru) |
| 20:37.14 | BruteSource | then why isnt the memory that windows was on availible? |
| 20:37.52 | BruteSource | because whenever i run haret i have to free up at least 20mb or it will not work |
| 20:37.53 | ponicg | BruteSource: I could be wrong... but i'm fairly sure android isn't running on my device with 18mb of ram, or is it that effective? |
| 20:38.19 | ponicg | is it possible that haret requires ~20mb free to do it's thing, but then it's all available to linux from then on? |
| 20:38.23 | ponicg | i'm not entirely sure to be honest |
| 20:38.28 | tmzt | yeah |
| 20:38.41 | BruteSource | well the bulk of what android uses should be at the root of your sd card |
| 20:38.42 | tmzt | once linux is running, it has the whole memory |
| 20:39.08 | BruteSource | tmzt then why do i have to free ram up to make haret work? |
| 20:39.15 | tmzt | haret does, but it has to request the memory it uses from wince |
| 20:39.24 | ali1234 | penguinz: http://pastebin.com/m38970e87 |
| 20:39.27 | ponicg | because haret probably needs to load a few things into memory(your kernel and images, maybE?) |
| 20:39.32 | tmzt | otherwise wince would crash too early and haret would never finish |
| 20:39.42 | ponicg | i'm not 100% sure, but heh, just going off intuition |
| 20:40.17 | BruteSource | so your saying haret itself needs 20mb or ram? |
| 20:40.41 | ponicg | i am proposing that, yes, but i don't have any definite information. that seems reasonable though |
| 20:41.43 | BruteSource | well ill still assume that wince is still holding some ram, it still makes more sense to me |
| 20:41.53 | tmzt | yes, haret needs the ram to load kernel/initrd (mostly initrd) |
| 20:42.04 | *** join/#htc-linux dcordes (n=jack@unaffiliated/dcordes) |
| 20:42.19 | tmzt | once the linux kernel starts booting (unless running from initrd with something like ext2) that memory is freed |
| 20:42.48 | Chicago | I am going to try the slow road and start by compiling cegcc and the compiling haret. |
| 20:42.49 | penguinz | ali1234: thanks a bunch |
| 20:42.58 | tmzt | if using initramfs, the initrd is extracted into a tmpfs, which is freed when(if) the init on initramfs finishes |
| 20:43.28 | tmzt | Chicago: ok, but there are harets at http://handhelds.org/~koconnor/haret/ |
| 20:43.58 | ali1234 | penguinz: i just dont understand why i had to do that. the driver is supposed to work on omap730 already, and the rtc is supposed to be identical on 850 |
| 20:44.03 | *** join/#htc-linux surgex (i=surge@pool-98-118-165-224.bflony.fios.verizon.net) |
| 20:44.21 | Chicago | tmzt: I'll used those if I have to. I just want to see if my rig can build this all from source. |
| 20:44.41 | tmzt | oh, sure. |
| 20:46.10 | Chicago | Which radio rom are you using with your titan? |
| 20:48.11 | sir0x | NetRipper: i tryed the latest haret-version from cvs, and while booting i can't see any framebufferoutput from the kernel. |
| 20:48.41 | *** join/#htc-linux Magorium (i=Othello@gateway/tor/x-e10ea92f33d2f21e) |
| 20:49.41 | sir0x | NetRipper: but if i use your haret-version downloadable on your page, it works ... did you patch haret ? |
| 20:51.00 | ahmeni | any android builds kicking around for the non-touchscreen models like the s630, s640 or the s720? |
| 20:52.42 | dcordes | wow, 87 nicks |
| 20:53.11 | BruteSource | ahmeni ya penguinz is working on one for the s260 |
| 20:53.20 | tmzt | dcordes: what is the right non-android intird to use on titan? |
| 20:53.39 | tmzt | 620? |
| 20:54.04 | BruteSource | ya tht |
| 20:54.23 | dcordes | tmzt, do they have proper keyboard support now? |
| 20:54.36 | BruteSource | for what? |
| 20:55.00 | tmzt | information, someone might want to know, BruteSource |
| 20:55.07 | ahmeni | BruteSource: awesome. got a link or is it just something he's working on personally? |
| 20:55.16 | tmzt | dcordes: I think zImage-sidekeys does |
| 20:55.25 | BruteSource | personaly ya nothing is published yet |
| 20:55.48 | sir0x | NetRipper: sorry never mind, i forgott to unmount my diamond after transfering the new haret *gg* |
| 20:56.04 | BruteSource | he is going to package something soon |
| 20:56.12 | tmzt | ahmeni: which htc device do you have? |
| 20:56.24 | *** part/#htc-linux Kalemas (i=ejabberd@jabbus.org) |
| 20:56.36 | BruteSource | right now he is having problems with rtc |
| 20:56.40 | ahmeni | tmzt: HTC Iris S640, its a little uncommon being specific to Telus in canada |
| 20:56.54 | tmzt | cdma dash? wow |
| 20:56.57 | dcordes | tmzt, I can cook a nice initrd quickly from szsoftware's angstrom build |
| 20:57.08 | dcordes | it has a picture viewer and mplayer. anything else needed? |
| 20:57.30 | BruteSource | its not a dash |
| 20:57.34 | tmzt | no, they got fdi working? |
| 20:57.48 | BruteSource | not an excalibur |
| 20:58.04 | BruteSource | its an iris |
| 20:58.12 | tmzt | isn't s620 excalibur, s630 cavilier (3g) |
| 20:58.37 | BruteSource | they are completely different phones |
| 20:58.54 | *** join/#htc-linux DasFx (n=John@5354790B.cable.casema.nl) |
| 20:58.54 | BruteSource | i would know if there was a 3g dash |
| 20:59.05 | BruteSource | i would own it lol |
| 20:59.26 | tmzt | look on xda-wiki front page, at the bottom |
| 21:01.17 | BruteSource | tmzt what am i looking for? |
| 21:01.33 | BruteSource | porting linux to htc devices? |
| 21:01.33 | tmzt | cavilier |
| 21:02.43 | BruteSource | ya that loks nothing like a dash |
| 21:02.48 | BruteSource | its ugly |
| 21:03.08 | szsoftware | dcordes: yo man! |
| 21:03.20 | dcordes | evening |
| 21:04.28 | tmzt | mostly the case, t-mobile never released it so you can't see it with their case |
| 21:04.57 | szsoftware | dcordes: did you make success, concerning wifi? |
| 21:04.59 | BruteSource | tmzt it has a different proc lol |
| 21:05.14 | tmzt | and iris is really basic looking, but still qvga widescreen |
| 21:05.21 | tmzt | I mean the form factor |
| 21:05.23 | BruteSource | the hardware icompletely different |
| 21:05.37 | *** join/#htc-linux tuxydo (n=joop@ip5455c588.speed.planet.nl) |
| 21:05.47 | BruteSource | all im saying is its a different device completely |
| 21:05.52 | dcordes | szsoftware, no the clocks must get sorted |
| 21:06.01 | BruteSource | cant be called a dash |
| 21:06.11 | tmzt | you wouldn't use omap in a cdma device because you would be wasting one core |
| 21:07.05 | BruteSource | exactly |
| 21:07.41 | BruteSource | im just saying its not a 3g dash its a completely different device with a simmilar forum factor |
| 21:07.42 | tmzt | and 3g is w-cdma, so you need/needed qualcomm |
| 21:08.42 | tmzt | BruteSource: I didn't look at the pictures when I said that, only the model numbers, and vague memories of the iris |
| 21:09.23 | BruteSource | okay... |
| 21:09.55 | BruteSource | i wish i had a 400hmz proc and more ram |
| 21:11.36 | tmzt | 4 core cortex is coming |
| 21:12.19 | BruteSource | msm8 is coming |
| 21:12.36 | BruteSource | 1 ghz i hear |
| 21:13.02 | tmzt | one chip for cmda/gsm please |
| 21:13.08 | tmzt | know what the 3d is? |
| 21:13.35 | BruteSource | one chip for cdma and gsm? |
| 21:13.49 | BruteSource | cdma phone with sim cards lol |
| 21:13.53 | tmzt | yeah, no more 7200/7500 |
| 21:14.05 | tmzt | r-uim is used in india |
| 21:14.43 | dcordes | ginge, are you there? |
| 21:14.56 | BruteSource | then we will have nextels radio tech on the chip next |
| 21:15.05 | ginge | dcordes: not entirely |
| 21:15.08 | BruteSource | whats it called isomthing |
| 21:15.21 | tmzt | iDEN, like gsm uses tdma for radio |
| 21:15.30 | tmzt | telus is still iDEN? |
| 21:15.47 | BruteSource | ya iden |
| 21:16.05 | BruteSource | tdma optimized for ptt on a seperate layer |
| 21:16.18 | dcordes | ginge, k, just wanted to report that removing the offsets from your nand_partitions.c does not solve the one-partition problem. totally forgot about that. |
| 21:17.17 | szsoftware | dcordes: what's the difference between kaiser and polaris ts? |
| 21:17.49 | tmzt | polaris and vogue ts are the same, aren't they? |
| 21:18.01 | dcordes | szsoftware, don't know exactly. didn't you tell me last time we talked about that, polaris ts is vogue-ts.c with some minor changes? |
| 21:19.16 | szsoftware | dcordes: yes, but now I try to take tsc2003.c (kaiser ts) as a base for rewriting polaris-ts.c with onsreen keyboard and htc-egpio events |
| 21:19.30 | dcordes | szsoftware, I think the polaris specific bits in vogue-ts.c are only related to the osk |
| 21:19.53 | szsoftware | just compiled ts2003.c, but it dos not respond in Android |
| 21:20.17 | dcordes | better stick with vogue-ts.c . |
| 21:20.21 | szsoftware | dcordes: on the console there where some output |
| 21:20.24 | BruteSource | g1 was just rooted |
| 21:20.32 | BruteSource | took long enough |
| 21:20.54 | dcordes | BruteSource, what do you mean it was rooted? |
| 21:20.56 | szsoftware | dcordes: that code is too complicated, I want to set up it from some steps back, without any keyboard stuff |
| 21:21.24 | dcordes | szsoftware, ok I'm not the C pro ;) |
| 21:21.36 | szsoftware | dcordes: np |
| 21:21.45 | BruteSource | completely opened |
| 21:22.21 | dcordes | BruteSource, got a link ? |
| 21:23.07 | BruteSource | i heard from a friend, but it might be bs |
| 21:23.15 | BruteSource | im looking now |
| 21:23.51 | BruteSource | and aparently it takes a hw mod |
| 21:24.21 | Chicago | How long should cegcc take to compile? |
| 21:25.42 | *** join/#htc-linux ulaas (n=ulaas@88.253.7.82) |
| 21:31.01 | *** join/#htc-linux miknix_ghost (n=miknix@bl3-204-214.dsl.telepac.pt) |
| 21:44.43 | BruteSource | wtf does active sync keep opening? |
| 21:45.26 | dcordes | BruteSource, no link found? |
| 21:46.30 | *** join/#htc-linux Guimli (n=guimli@ecu69-1-82-231-127-213.fbx.proxad.net) |
| 21:46.36 | BruteSource | dcordes it was a friend and all he did was change the env variable to give a # |
| 21:46.54 | BruteSource | he didnt have uid=0 |
| 21:47.02 | dcordes | I though somebody did physically open it and make some nice photos. |
| 21:47.29 | BruteSource | lol no im talking about getting root on the g1 |
| 21:48.01 | imfloflo | hi dcordes i want to know if its possible to run android 1.0 on micro SD on polaris , and how to format my SD to ext3 to run android? htk |
| 21:48.27 | BruteSource | lol |
| 21:48.42 | BruteSource | been getting alot of this lately |
| 21:49.45 | dcordes | imfloflo, hi there. you can format your SD easily from a linux computer. I use a program called gparted most of the time. don't know how to do it in windows. |
| 21:50.05 | dcordes | (for ext3) |
| 21:50.29 | imfloflo | ok so this first step is good, what shoul i do next? |
| 21:51.18 | dcordes | imfloflo, look at dzo's website |
| 21:52.08 | imfloflo | don't know the address :$ |
| 21:55.10 | *** join/#htc-linux ali1234 (n=al@robotfuzz.co.uk) |
| 21:55.36 | BruteSource | yey he got it working and its not freezing! |
| 21:57.03 | imfloflo | dcordes can you send me do link please |
| 21:57.34 | dcordes | imfloflo, sorry I have overseen that. http://it029000.massey.ac.nz/vogue/ |
| 21:58.23 | imfloflo | thanx i already read this site but no info on how to format in ext3 and where put files after formatingsd |
| 21:59.04 | dcordes | imfloflo, maybe your distribution has doku on how to format? |
| 22:01.12 | szsoftware | imfloflo: you have mac os on your host computer? |
| 22:01.17 | imfloflo | yes ok to format but after that where i must put file of zip in dzo site? |
| 22:01.22 | imfloflo | yes i have |
| 22:01.27 | imfloflo | or linux |
| 22:01.30 | imfloflo | or vista |
| 22:01.41 | szsoftware | imfloflo: ok, so you did format? |
| 22:02.29 | szsoftware | imfloflo: I unzipped data.gz and system.gz on the host. |
| 22:02.40 | szsoftware | imfloflo: then mounted one by one |
| 22:03.24 | szsoftware | imfloflo: mount -o loop system.img /mnt/android-system |
| 22:03.36 | szsoftware | imfloflo: mount -o loop data.img /mnt/android-data |
| 22:05.17 | szsoftware | imfloflo: then I unzipped the initrd, mkdir ramdisk (on host); cd ramdisk; cpio -i < ../initrd.cpio |
| 22:06.00 | szsoftware | imfloflo: now cp -R /mnt/android-data /media/yourSDpartion/ |
| 22:06.13 | szsoftware | imfloflo: now cp -R /mnt/android-system /media/yourSDpartion/ |
| 22:06.28 | szsoftware | imfloflo: now cp -R ramdisk/ /media/yourSDpartion/ |
| 22:07.40 | szsoftware | imfloflo: important, the system-files reside then in /media/yourSDpartition/system/ |
| 22:07.55 | szsoftware | imfloflo: important, the data-files reside then in /media/yourSDpartition/data/ |
| 22:08.37 | szsoftware | imfloflo: what linux distri do you have? |
| 22:09.08 | imfloflo | ubuntu |
| 22:09.19 | szsoftware | imfloflo: that's fine |
| 22:10.13 | szsoftware | imfloflo: you need to put the sd-card in a sd-card reader (nice little thing makes a big 16GB usb-stick) |
| 22:10.14 | imfloflo | but the probleme is how can i link my polaris to format my sd i haven't any other option to format the sd can't do that directy on polaris? |
| 22:11.07 | szsoftware | imfloflo: IMHO you can't do this, since Polaris does not provide usb-storage |
| 22:11.26 | imfloflo | if i install wm5storage ? |
| 22:11.36 | szsoftware | imfloflo: IIRC, the whole wm6 devices haven't that |
| 22:12.00 | szsoftware | imfloflo: for partitioning you need raw access |
| 22:12.22 | szsoftware | imfloflo: imho wm5storage will you give the filesystem |
| 22:12.51 | imfloflo | damm it ! |
| 22:13.05 | imfloflo | i must buy a sd usb stick |
| 22:13.10 | imfloflo | now |
| 22:13.28 | szsoftware | imfloflo: tommorrow, is a good day to buy a little card reader, sandisk for instance bundles often greater sdhc with that |
| 22:14.30 | imfloflo | i have on vista pc with multiple card reader, on ubuntu pc and, one mac but not all requires in one pc : |
| 22:14.33 | imfloflo | :s |
| 22:14.33 | szsoftware | imfloflo: to have that reader is everytimes a good choice, man 16GB usb-stick, with changeable media support, wow :-) |
| 22:15.18 | szsoftware | imfloflo: you can use a live cd/distri like gparted on your windows host |
| 22:15.55 | szsoftware | imfloflo: do you have adapter from micro-sd to mini-sdà |
| 22:15.59 | szsoftware | imfloflo: ? |
| 22:16.32 | imfloflo | i have it micro sd to SD |
| 22:16.41 | ali1234 | when you buy a micro sd, do you usually get both mini and full size adapters? or just micro -> full size? |
| 22:16.49 | tmzt | wm5stroage should be block, but it doesn't always work |
| 22:16.51 | imfloflo | i must find a cd now |
| 22:17.05 | imfloflo | to burn a live cd |
| 22:18.19 | parmaster | usually you get micro -> full size |
| 22:18.49 | parmaster | i was just using one on a ba |
| 22:18.59 | ali1234 | damn.. wizard needs mini |
| 22:19.08 | ali1234 | i guess i only need one adapter though |
| 22:19.13 | parmaster | sucked cuz i had to hold it in with my thumb while i built the image onto lol |
| 22:20.33 | *** join/#htc-linux ssapphiree (n=sapphire@ppp91-77-157-85.pppoe.mtu-net.ru) |
| 22:20.50 | *** part/#htc-linux ssapphiree (n=sapphire@ppp91-77-157-85.pppoe.mtu-net.ru) |
| 22:25.17 | imfloflo | i'll try my ubuntu cd see if i can use it as a live cd on my windows |
| 22:26.23 | tmzt | penguinz: what happened? it was rtc or the monotonic clock? |
| 22:28.06 | BruteSource | he had put /data on tmpfs |
| 22:28.21 | BruteSource | it was filing up since he only gave it 10mb |
| 22:28.25 | szsoftware | imfloflo: if you have no gparted, there is parted or simply fdisk |
| 22:28.35 | BruteSource | tmzt |
| 22:28.56 | szsoftware | imfloflo: i prefer fdisk, and then mkfs.ext[2|3] |
| 22:28.56 | tmzt | oh |
| 22:29.29 | parmaster | fdisk works fine |
| 22:31.32 | parmaster | easy way to build with a live system is.. use knoppix with an external usb multiflash card reader/writer |
| 22:32.19 | parmaster | boot the knoppix live with: |
| 22:32.22 | parmaster | knoppix scsi_mod.max_luns=512 |
| 22:32.46 | parmaster | (with your usb multiflash card reader already connected) |
| 22:34.09 | tmzt | that works, |
| 22:34.16 | tmzt | you can also cat something to /proc |
| 22:34.16 | parmaster | knoppix automounts the windows partition where you downloaded the images so easy as hell once the system is up |
| 22:36.47 | parmaster | i cleanly use any windows machine with a net connection to install images |
| 22:39.48 | parmaster | invest in an external usb multiflash card reader/writer.. they're cheap and its worth it. |
| 22:41.45 | druidu | btw, is there a standard tool to build yaffs2 partitions? |
| 22:42.06 | tmzt | try google git, maybe it's on there |
| 22:42.19 | imfloflo | will buy a micro sd/usb stick easily |
| 22:43.00 | *** join/#htc-linux BruteSource (n=BruteSou@m340e36d0.tmodns.net) |
| 22:45.34 | *** join/#htc-linux BruteSource (n=BruteSou@m740e36d0.tmodns.net) |
| 22:47.04 | *** join/#htc-linux dante (n=dante@net-93-148-250-182.t2.dsl.vodafone.it) |
| 22:55.04 | *** join/#htc-linux data|2 (n=datachao@189.27.183.32.adsl.gvt.net.br) |
| 22:55.50 | penguinz | tmzt, the problem i was having was due to /data not being large enough, i was trying it on tmpfs for a while... |
| 22:56.31 | penguinz | I switched back to having it mount /data from a loopback image. |
| 22:56.42 | tmzt | yeah, BruteSource told me |
| 22:56.55 | tmzt | so did you get the rtc working, or was that not also a problem? |
| 22:57.18 | tmzt | and do you know anything about a sf site, I didn't think they did git yet? |
| 22:57.22 | penguinz | It is more accurate now, but not actually the correct time. |
| 22:57.39 | penguinz | I think i need to play around with the register values some more. |
| 23:00.48 | BruteSource | tmzt someone else from the xda froums it doing the sf ite |
| 23:01.03 | BruteSource | site |
| 23:01.39 | BruteSource | he was going to just clone the linwizard tree but with penguinz work i dunno |
| 23:03.44 | ali1234 | penguinz: i was just going through the E28 source release and their omap730 rtc works like mine |
| 23:04.18 | ali1234 | penguinz: how it is more accurate? |
| 23:04.24 | *** join/#htc-linux tuxydo (n=joop@ip5455c588.speed.planet.nl) |
| 23:05.23 | penguinz | well by more accurate, i meant not 1970 haha |
| 23:05.37 | ali1234 | penguinz: http://pastebin.com/m65e96fa8 |
| 23:05.41 | ali1234 | thats the regs they use |
| 23:05.57 | ali1234 | penguinz: does it say 10 jan 200? |
| 23:06.01 | ali1234 | 2000 |
| 23:06.42 | penguinz | no, it was 2007 nov something |
| 23:06.47 | penguinz | i can reboot and find out exactly. |
| 23:07.00 | ali1234 | really odd |
| 23:07.07 | ali1234 | im getting exactly the right time now |
| 23:09.42 | ali1234 | penguinz: also it's possible that the original driver messed up the clock settings |
| 23:10.20 | ali1234 | penguinz: that's what led me to figure out what was happening with the register sizes |
| 23:11.32 | penguinz | ah ok, how would i "reset it" so to speak. |
| 23:11.51 | ali1234 | penguinz: boot windows and set it |
| 23:12.04 | penguinz | upon booting i get: friday nov 2 4:20 utc 2007 |
| 23:12.22 | penguinz | i will try re-setting it in windows and see if that helps |
| 23:12.33 | ali1234 | penguinz: you might find windows think's it is that time too |
| 23:13.51 | penguinz | yes, you are correct ali |
| 23:14.00 | penguinz | I should really start paying attention to things... |
| 23:14.34 | ali1234 | heh... i didnt notice what was happening for a long time :) |
| 23:15.57 | penguinz | it gives the correct time now, great! |
| 23:16.33 | penguinz | only thing odd is that it says friday instead of sunday... |
| 23:16.53 | penguinz | because I input the date wrong, nevermind |
| 23:17.08 | penguinz | lack of sleep is never helpful it seems. |
| 23:37.14 | *** join/#htc-linux LanceHaig (i=4e696aee@foresight/member/lhaig) |
| 23:37.44 | *** part/#htc-linux renc (n=user@91.68.208.8) |
| 23:41.31 | szsoftware | dcordes: still around? |
| 23:41.35 | dcordes | yes |
| 23:42.08 | szsoftware | dcordes: are we far away from charging the kaiser/pola batterie in linux? |
| 23:42.51 | dcordes | szsoftware, there is trout battery driver and kaiser battery type was documented in the wiki. |
| 23:43.47 | szsoftware | dcordes: oh, you mean trout-battery could work? |
| 23:44.03 | dcordes | at least, it might be a base. |
| 23:49.27 | szsoftware | dcordes: what ist the msm_rpc_router? |
| 23:50.09 | SanMehat | szsoftware: my beasty :) |
| 23:52.23 | szsoftware | SanMehat: ahh, ok. So can you explain? |
| 23:54.18 | szsoftware | dcordes: is the ds2746 battery monitoring chip confirmed to build in kaiser? |
| 23:54.57 | dcordes | szsoftware, gotta ask cr2_ |
| 23:55.51 | dcordes | I need sleep, good night |
| 23:56.21 | szsoftware | cr2_: is the ds2746 battery monitoring chip confirmed to build in kaiser or polaris? |