| 00:00.19 | miknix | cr2_, did you see the part numbers of LCDs being used on the wizards? |
| 00:00.49 | cr2_ | miknix: yes. |
| 00:01.05 | cr2_ | BabelO: type has lcdspi setup |
| 00:01.13 | cr2_ | s/type/type 2/ |
| 00:01.25 | dcordes | infernix: it is just that no terminal is spawned from inittab |
| 00:01.30 | infernix | dcordes: ./tmp/deploy/glibc/images/kaiser/Angstrom-console-image-glibc-ipk-2008.1-test-20080425-kaiser.rootfs.cpio.gz |
| 00:01.38 | dcordes | infernix: right |
| 00:01.42 | cr2_ | 2 is sony |
| 00:01.47 | infernix | dcordes: with no dev/pts folder, mounting fails, and all goes downhill from there |
| 00:02.54 | cr2_ | hm. wrong |
| 00:02.57 | BabelO | cr2_: i compile in cpld driver, but did not see any trace of it in dmesg |
| 00:03.10 | cr2_ | 3 has spi setup. and it's toppoly. like on ba6 |
| 00:03.36 | dcordes | infernix: when I fiddled with zaurus rootfs I always extracted them with #tar xvf rootfs.tar.gz. otherwise I get errors on the device stuff. maybe it was something permission related in your case too? |
| 00:03.43 | cr2_ | BabelO: why ? add the printk to probe() if it's not there. |
| 00:03.52 | miknix | cr2_, I'm going to dump the lcd timing registers from wm5 then |
| 00:04.23 | BabelO | cr2_: lol desactivated, i reboot |
| 00:04.30 | BabelO | :) |
| 00:09.56 | BabelO | cr2_: good egpio driver loaded now ;) |
| 00:11.48 | cr2_ | 90027134 is the LCD panel type |
| 00:12.12 | cr2_ | BabelO: check how do declare the gpios. |
| 00:12.27 | cr2_ | then you can use then with generic gpio api. |
| 00:13.28 | BabelO | cr2_: good, i check |
| 00:13.44 | cr2_ | 37 is B5, 2c is R5 |
| 00:15.57 | cr2_ | BabelO: use the last column in AtemisCPLD |
| 00:16.06 | miknix | cr2_, OMAP_LCDC_TIMING0: 0xF OMAP_LCDC_TIMING1: 0xE OMAP_LCDC_TIMING2: 0x4 OMAP_LCDC_STATUS: 0x2 |
| 00:16.17 | miknix | ops |
| 00:16.17 | *** join/#htc-linux dcordes (n=lukas@f054211148.adsl.alicedsl.de) |
| 00:16.26 | miknix | s/STATUS/SUBPANEL/ |
| 00:16.33 | BabelO | cr2_: yes i understand :) |
| 00:16.38 | dcordes | hells my desktop crashed |
| 00:18.55 | cr2_ | miknix: wiza has a lot of debug info... |
| 00:19.32 | cr2_ | BabelO: do you need the latest .lst ? |
| 00:20.23 | miknix | cr2_, what do you mean? |
| 00:20.26 | infernix | dcordes: im going nuts over this. do you use the stable or dev branch for OE? |
| 00:20.31 | infernix | i think udev is broken in dev |
| 00:20.31 | BabelO | cr2_: .lst ? i have the old you send to me |
| 00:20.38 | dcordes | infernix: always dev |
| 00:20.48 | dcordes | infernix: does it not build? |
| 00:20.49 | infernix | ugh. and youhav eno problems booting a cpio image? |
| 00:21.00 | dcordes | I just copied from sd to nand |
| 00:21.02 | dcordes | pressing boot |
| 00:21.16 | dcordes | gogogo |
| 00:21.27 | BabelO | cr2_: hey i can enable FM rds i2c chip now ;) |
| 00:21.28 | cr2_ | BabelO: i have a newer better one. |
| 00:21.28 | dcordes | fb.. |
| 00:21.43 | BabelO | cr2_: i want then , thx |
| 00:21.48 | cr2_ | BabelO: there are a hell of gpios there. |
| 00:21.49 | dcordes | waiting 10 seconds before mounting.. hanged! |
| 00:22.18 | dcordes | args I didn't specify init ^^ |
| 00:22.19 | BabelO | cr2_: let check kbd backlight egpio |
| 00:23.01 | cr2_ | BabelO: yes. |
| 00:23.16 | cr2_ | BabelO: and vibra. |
| 00:23.47 | BabelO | cr2_: if i understand it is that HTCARTEMIS_EGPIO_BASE + 2*16 + 4 ? |
| 00:24.25 | cr2_ | 2 is the bank, 4 is the gpio (offset) number |
| 00:24.51 | cr2_ | cpld(3,3,x) ? |
| 00:25.03 | cr2_ | check the loox page at hh.org |
| 00:25.05 | BabelO | ok so it is wrong, i want bank 0x3 gpio 2 |
| 00:25.47 | cr2_ | BabelO: http://www.handhelds.org/moin/moin.cgi/LooxC550Hardware |
| 00:26.00 | cr2_ | BabelO: and the loox header. |
| 00:26.47 | cr2_ | miknix: you wizard people are lazy bastards :) forcing me to look at your weird i2c cpld ;) |
| 00:27.21 | miknix | cr2_, sorry :) but I dont have electronics background.. |
| 00:27.25 | dcordes | infernix: it doesn't like the OE cpio.gz I think. it always freezes after trying to mount initrd |
| 00:27.45 | miknix | cr2_, just know a lot of C |
| 00:28.05 | cr2_ | miknix: you think i have ? :) |
| 00:28.10 | miknix | yes |
| 00:28.13 | miknix | ;p |
| 00:28.20 | BabelO | cr2_: cpld wiki is wrong, description starts at 0 |
| 00:28.32 | cr2_ | ok, but not really professional. and it was long ago. |
| 00:28.36 | infernix | here's an interesting thing |
| 00:28.58 | cr2_ | BabelO: it was easier for me to match the wince this way. |
| 00:29.08 | infernix | i have wisbar advance running on WM. if I don't run it, haret won't fire up linux. if it's running, less problems booting. |
| 00:29.50 | cr2_ | miknix: hmm. the same kind of wifi/sd mux like on artemis. i'll check the numbers. |
| 00:29.54 | dcordes | infernix: ah what? |
| 00:30.11 | dcordes | one of those propietary buy programs you bought? |
| 00:30.18 | infernix | yeah |
| 00:30.34 | infernix | bleh. boot issues once again |
| 00:30.45 | dcordes | I can't afford that. wince itself is an expensive piece of bullshit for itself |
| 00:30.59 | miknix | cr2_, mux? good, one thing I can do. do you want the mux config for wifi? I already have the config for SD |
| 00:31.06 | BabelO | forgot to eat this evening :) |
| 00:31.13 | infernix | order pizza |
| 00:31.20 | cr2_ | miknix: what do you mean ? |
| 00:31.22 | dcordes | infernix: that's the usual random thing. my booting ritual is also not so reliable |
| 00:31.31 | BabelO | infernix: too late 2:33 am |
| 00:31.40 | infernix | there's a food joint open here |
| 00:31.41 | infernix | every day |
| 00:31.44 | dcordes | infernix: did you try booting the OE made cpio now? |
| 00:32.00 | infernix | from like 11am till 5am |
| 00:32.05 | cr2_ | miknix: looks like something mmaped, though. |
| 00:32.21 | infernix | dcordes: fails horribly in all conceivable ways |
| 00:32.32 | miknix | goes get some beer |
| 00:32.38 | cr2_ | the usual orrne/biceq |
| 00:33.22 | dcordes | hands miknix a fine glass of his whiskey |
| 00:33.34 | infernix | dcordes: im trying to boot straight into /bin/sh just to see whats up |
| 00:33.38 | dcordes | infernix: do you also get a freeze after jumping to initrd? |
| 00:33.56 | cr2_ | 0-0x44000 |
| 00:33.58 | miknix | likes no wiskeys, only black roasted beer |
| 00:34.16 | infernix | dcordes: you must untar it, ln -s sbin/init init |
| 00:34.20 | infernix | then rebuild the initrd |
| 00:34.23 | infernix | otherwise it won't fire |
| 00:34.39 | cr2_ | is 0xfffbc000 |
| 00:35.09 | cr2_ | 43 and 42 |
| 00:35.42 | cr2_ | ok, it's a weird way to access the gpio |
| 00:36.16 | cr2_ | +4 is data_out |
| 00:38.43 | cr2_ | +8 is gpio_dir |
| 00:39.13 | Marex | cr2_, hiya, what are you decoding ? |
| 00:39.50 | Marex | I just got to some function that can be considered a set_all_gpios() in IPL |
| 00:40.10 | cr2_ | omap gpios |
| 00:40.15 | Marex | I see :) |
| 00:41.45 | *** join/#htc-linux jeebster (n=kanakana@a88-112-94-153.elisa-laajakaista.fi) |
| 00:41.45 | miknix | cr2_, http://tinyurl.com/3kv2pv |
| 00:42.25 | cr2_ | miknix: you should setup the same page for wiza http://wiki.xda-developers.com/index.php?pagename=ArtemisGPIO |
| 00:43.21 | cr2_ | miknix: bt 40,42,43 is good. the same as on artemis |
| 00:44.09 | dcordes | infernix: yeeha got console |
| 00:44.28 | dcordes | infernix: no |
| 00:44.29 | dcordes | t |
| 00:44.36 | miknix | cr2_, I'll dump wireless gpios now.. At the time I got those on the url I was using wifi for connecting to haret |
| 00:44.56 | dcordes | infernix: I guess I'm getting the same tty1 thing after trying to login as you? |
| 00:45.41 | cr2_ | miknix: create such table, and put the data there. i guess a lof of things will be similar to artemis. |
| 00:45.52 | miknix | cr2_, OK. |
| 00:47.29 | infernix | dcordes: 10-4 |
| 00:47.36 | infernix | im debugging the problem |
| 00:49.43 | infernix | pretty weird |
| 00:49.44 | dcordes | same here I'm comparing our rootfs to a780 rootfs |
| 00:49.52 | infernix | im getting "illegal instruction" from a couple of scripts |
| 00:50.06 | infernix | im manually running all the rcS scripts |
| 00:50.12 | Kevin2 | dcordes / infernix: msm booting? |
| 00:50.34 | infernix | hi kevin |
| 00:50.39 | cr2_ | hi Kevin2 |
| 00:50.46 | infernix | booting still randomly hangs but persistence wins |
| 00:51.02 | infernix | right now im trying to figure out why the OE console-image does not boot |
| 00:51.16 | infernix | regular boot spits out errors about /dev, it seems root fs goes readonly and shit hits the fan |
| 00:51.31 | dcordes | Kevin2: infernix noticed improvements in booting kaiser ramdisks with latest haret. So I asked him if there were improvements |
| 00:51.37 | dcordes | did you do any msm stuff lately? |
| 00:52.06 | Kevin2 | Hi cr2_; Hi infernix. |
| 00:52.25 | infernix | it can be random. im just not sure |
| 00:52.27 | dcordes | sorry hi Kevin2 btw |
| 00:52.34 | infernix | can't consistently reproduce a thing |
| 00:52.42 | Kevin2 | dcordes: There hasn't been any recent changes to the boot code. |
| 00:52.49 | Kevin2 | Hi dcordes. :-) |
| 00:53.16 | dcordes | Kevin2: ok. we all have problems with the ramdisk booting. it just randomly decides to hang after gogogo |
| 00:53.20 | Kevin2 | infernix: Does it pass a crc check? (Can you see fb during boot?) |
| 00:53.30 | infernix | im in /bin/sh |
| 00:53.33 | infernix | skipping init |
| 00:53.41 | infernix | manually running each rcS script |
| 00:53.55 | infernix | but when it doesn't boot, its just haret freezing |
| 00:53.57 | cr2_ | miknix: gpio 0x54 selects between the SD and WIFI cmd config |
| 00:54.12 | cr2_ | miknix: the sd/wifi mux. |
| 00:54.12 | infernix | no visual change or corruption so i don't think fb gets hit at all |
| 00:55.10 | miknix | cr2_, that is important. does linux-omap provide a framework to change mux configuration after boot? |
| 00:56.16 | dcordes | Kevin2: yes can observe same behaviour here. just a frozen screen after the GoGoGo message |
| 00:56.21 | cr2_ | miknix: don't think so. but we will need it for wifi later. |
| 00:56.28 | Kevin2 | infernix: With a successful boot, is haret able to write the the fb? |
| 00:56.44 | miknix | damn |
| 00:56.52 | miknix | this wiki is pain in the ass to edit tables |
| 00:57.02 | dcordes | miknix: ack |
| 00:57.18 | infernix | Kevin2: if you mean to say that I see the kernel bootup log, yes |
| 00:57.48 | Kevin2 | I'm a big fan of mediawiki - all the others are terrible. (It's the wiki language that matters, not the server back end.) |
| 00:58.41 | Kevin2 | infernix: Haret should blank the screen, and write messages like: Turning off MMU... |
| 00:58.58 | infernix | Kevin2: oh, never seen that before |
| 00:59.02 | infernix | do i need to spec an option for that? |
| 00:59.19 | Kevin2 | infernix: Can you pastebin the log during a boot? |
| 00:59.29 | infernix | oh it always reaches Go go go |
| 00:59.42 | infernix | i already tried comparing succesful boot with failed boots but I don't see any difference in the log |
| 00:59.47 | Kevin2 | (Create earlyharetlog.txt file and then run haret and try to boot. Then send haretlog.txt to pastebin.) |
| 01:00.00 | infernix | yeah. is it ok over network as well? |
| 01:00.09 | infernix | i prefer that over the log file copying hassle |
| 01:00.17 | Kevin2 | infernix: It's much better to use earlyharetlog.txt trick. |
| 01:00.22 | dcordes | digs in his haretconsole logs |
| 01:00.39 | cr2_ | Kevin2: need your help with gpio trace / wirq on atlas3 |
| 01:00.53 | Kevin2 | cr2_: Okay. |
| 01:01.01 | cr2_ | Kevin2: unlike other devices it has a register per gpio |
| 01:01.44 | cr2_ | to check a gpio status you need to read a register, and mask a "gpio read" bit |
| 01:01.56 | cr2_ | there are 64 gpios. |
| 01:02.08 | cr2_ | i've put this data into the wiki table at hh.org |
| 01:02.48 | Kevin2 | Got a link? |
| 01:02.55 | cr2_ | http://www.handhelds.org/moin/moin.cgi/GoPalP4225 |
| 01:03.48 | infernix | dcordes: this OE angstrom image is a mess |
| 01:04.08 | infernix | it almost looks to me like 'init' itself is messing with the filesystem |
| 01:04.11 | BabelO | cr2_: the egpio driver seem to alter my lcd :( |
| 01:04.56 | cr2_ | BabelO: yes, it clears the gpios at startup, and there are 2 LCD cpld power gpios :) |
| 01:05.08 | dcordes | infernix: inittab looks same as on a780 |
| 01:05.15 | infernix | dcordes: if you spec rdinit=/bin/sh, then you can get in |
| 01:05.16 | BabelO | cr2_: ok, so it look like that |
| 01:05.23 | infernix | then 'exec init' and it'll break |
| 01:05.27 | dcordes | infernix: also tty dev nodes are equal in both images |
| 01:05.43 | infernix | its something with the startup scripts, or even worse, /sbin/init |
| 01:05.53 | cr2_ | BabelO: you'd either write a normal LCD driver :) or set the in the startup. check the apache/magician for that. |
| 01:05.59 | dcordes | infernix: ok will try that |
| 01:06.05 | Kevin2 | cr2_: Can't you just add every gpio register to GPIOS variable? |
| 01:06.20 | BabelO | cr2_: i ve already a normal lcd driver , without cpld gpio |
| 01:06.34 | cr2_ | Kevin2: all 64 ? ok, it's possible. |
| 01:06.56 | cr2_ | Kevin2: but what do do with the interrupts ? |
| 01:07.13 | Kevin2 | cr2_: How does one know which gpio raised the irq? |
| 01:07.39 | cr2_ | Kevin2: hmm. need to check these kernel patches... |
| 01:08.50 | cr2_ | but it's too late for me for such a complex task ;) |
| 01:11.18 | miknix | cr2_, whats the difference between GPIOS IC174 and IM174 |
| 01:11.23 | dcordes | infernix: I have the breakthrough |
| 01:11.58 | dcordes | it all fails because mplayer doesn't work! |
| 01:12.07 | infernix | dcordes: checkroot is breaking things |
| 01:12.46 | dcordes | first things first what's broken? |
| 01:12.49 | Kevin2 | cr2_: Looks like you can have a max of 64 gpios - it's easy to increase though. |
| 01:12.53 | dcordes | (sorry I'm not that fast) |
| 01:13.05 | infernix | hold on |
| 01:13.27 | infernix | testing theory |
| 01:15.30 | cr2_ | miknix: gpio 0x7c is cpld related. |
| 01:16.01 | cr2_ | miknix: 0, msleep 1, 1. looks like some reset. |
| 01:18.09 | miknix | cr2_, http://wiki.xda-developers.com/index.php?pagename=WizardGPIO |
| 01:18.47 | cr2_ | miknix: looks good. |
| 01:19.17 | cr2_ | miknix: 0x54 is the sd/wifi mux |
| 01:19.39 | BabelO | cr2_: no, something is wrong with cpld |
| 01:21.06 | miknix | BabelO, what is connected to the CPLD? |
| 01:21.44 | BabelO | miknix: on artemis i have only gpio power for gps, bt or led |
| 01:21.58 | miknix | hum.. |
| 01:25.40 | cr2_ | miknix: on wiza the wifi power is on cpld. |
| 01:25.47 | cr2_ | BabelO: wifi too ? |
| 01:25.57 | cr2_ | BabelO: and lcd :) |
| 01:26.12 | BabelO | cr2_: yes yes lot of thing to discover |
| 01:26.32 | BabelO | cr2_: if i use set_gpio_data(EGPIO...); device does not bot :( |
| 01:26.38 | cr2_ | miknix: 5,0x2 and 5,0x10 are wifi power gpios |
| 01:26.50 | cr2_ | miknix: on lcd. |
| 01:26.56 | cr2_ | s/lcd/cpld/ |
| 01:27.16 | cr2_ | BabelO: check n560_gps |
| 01:27.53 | BabelO | cr2_: yes already checked |
| 01:28.45 | cr2_ | miknix: gpio8 is also wifi -related |
| 01:28.59 | cr2_ | BabelO: .shift is the same as on n560 ? |
| 01:29.08 | infernix | Kevin2: ok, i have a log with a couple of consecutive successful boots, and the last one is unsuccessful. pastebin? |
| 01:29.51 | miknix | its late here |
| 01:29.54 | infernix | dcordes: are there alternatives to angstrom? |
| 01:29.55 | miknix | going to sleep |
| 01:30.02 | miknix | good night everyone |
| 01:30.04 | dcordes | infernix: no |
| 01:30.07 | infernix | night:) |
| 01:30.10 | infernix | dcordes: ugh |
| 01:30.15 | BabelO | cr2_: i set the same than n560 |
| 01:30.17 | dcordes | infernix: what's the problem? |
| 01:30.33 | infernix | something goes horribly wrong when it tries to mount all filesystems |
| 01:30.37 | BabelO | and adress to 0x04000400 like you told me |
| 01:30.46 | infernix | it tries to remount /dev which i can't for the life of me figure out why |
| 01:30.51 | infernix | its not in fstab |
| 01:31.20 | dcordes | I can see the whole filesystem |
| 01:32.02 | dcordes | we seriously lack | on the keymap |
| 01:32.13 | dcordes | infernix: I can see plenty of files in dev |
| 01:32.24 | cr2_ | BabelO: -0x23f7fe00 |
| 01:32.41 | BabelO | cr2_: ? |
| 01:32.52 | Kevin2 | infernix: Yes. |
| 01:32.57 | infernix | http://pastebin.ca/997993 |
| 01:32.59 | dcordes | infernix: why can we brows the filesystem when it's not mounted? |
| 01:33.22 | cr2_ | 0xdc080200 ? |
| 01:34.43 | infernix | dcordes: you're seeing any 'illegal instruction' errors? |
| 01:34.49 | dcordes | yes |
| 01:34.57 | infernix | i wonder what that's all about |
| 01:35.02 | dcordes | when I try and launch one of the applications I specified with extra install |
| 01:35.09 | dcordes | obviously architecture problem! |
| 01:35.20 | infernix | armv5 then? |
| 01:35.36 | dcordes | maybe it's that extra .inc file in the machine conf |
| 01:35.57 | infernix | or eglibc instead of glibc? |
| 01:36.07 | dcordes | I was wondering if the illegal problem is because I have armv5 packages left in my Oe |
| 01:36.16 | cr2_ | BabelO: should be 0xb8100000 |
| 01:36.22 | dcordes | but if you get the same this can't be.. |
| 01:36.25 | Kevin2 | infernix: Do you know how to get the msm chip to update the screen from the framebuffer? |
| 01:36.55 | infernix | TARGET_FPU = "hard". should that be soft |
| 01:37.10 | dcordes | I don't know do we have a floating point unit in kaiser? |
| 01:37.14 | infernix | Kevin2: not really |
| 01:37.19 | infernix | dcordes: not afaik |
| 01:37.30 | dcordes | then we should seriously do softfloat |
| 01:37.32 | BabelO | cr2_: b8100402 so it is ok for 0x04000400 |
| 01:37.40 | cr2_ | BabelO: missed *2 lsl1 |
| 01:37.54 | cr2_ | 0xdc080200 *2 |
| 01:37.56 | infernix | dcordes: where did you base kaiser.conf on |
| 01:38.09 | dcordes | infernix: on XorA |
| 01:38.15 | cr2_ | b8100400 |
| 01:38.16 | BabelO | cr2_: sorry i don't understand |
| 01:38.31 | cr2_ | ok, so it's the base address. |
| 01:38.58 | BabelO | ok, register shift is +2 |
| 01:39.01 | cr2_ | BabelO: the code uses a very strange and obfuscated way to access this address. |
| 01:39.10 | cr2_ | BabelO: 1 |
| 01:39.20 | dcordes | infernix: it's similar to nokia800.conf possibly XorA picked there |
| 01:39.30 | cr2_ | BabelO: it should be the same as on n560 |
| 01:40.02 | infernix | bitbakes |
| 01:40.02 | BabelO | cr2_: so i miss something |
| 01:40.13 | BabelO | cr2_: good night, have to skeep now |
| 01:40.16 | BabelO | night all |
| 01:40.45 | cr2_ | BabelO: sent .lst |
| 01:40.50 | cr2_ | good night |
| 01:40.52 | dcordes | infernix: what? MACHINE = "nokia800"? |
| 01:40.54 | infernix | Kevin2: maybe the framebuffer code in the linux driver helps? |
| 01:41.26 | infernix | dcordes: http://rafb.net/p/jnzpDQ69.html |
| 01:42.10 | dcordes | ah right the softloat. the wizzo gets me dizzy |
| 01:43.12 | dcordes | rm -rfs tmp |
| 01:43.28 | infernix | im not |
| 01:43.39 | infernix | seems to be intelligent enough to rebuild |
| 01:44.08 | dcordes | I'm not trusting that beast |
| 01:47.10 | infernix | im not sure on the FPU |
| 01:53.37 | dcordes | infernix: found anything? no luck on google for me |
| 01:53.42 | infernix | nada |
| 01:53.47 | dcordes | only found that crap brochure |
| 01:53.55 | infernix | so im guessing soft |
| 01:53.59 | dcordes | with the diagram which is taken off qualcomm homepag |
| 01:55.13 | infernix | Qualcomm MSM7200 (with integrated ARM926EJ-S Coprocessor@274MHz, used in HTC TyTN II (Kaiser), HTC Nike) |
| 01:55.18 | infernix | SIMD, Jazelle DBX, (VFP), 8-stage pipeline |
| 01:55.36 | infernix | VFP technology is a coprocessor extension to the ARM architecture. It provides low-cost single-precision and double-precision floating-point computation fully compliant with the ANSI/IEEE Std 754-1985 Standard for Binary Floating-Point Arithmetic. VFP provides floating-point computation suitable for a wide spectrum of applications such as PDAs, smartphones, voice compression and decompression, three-dimensional graphics and digital audio, printer |
| 01:55.36 | infernix | s, set-top boxes, and automotive applications. The VFP architecture also supports execution of short vector instructions allowing SIMD (Single Instruction Multiple Data) parallelism. This is useful in graphics and signal-processing applications by reducing code size and increasing throughput. |
| 01:55.38 | dcordes | we have the jazelle specific stuff in the inc thing |
| 01:55.56 | infernix | maybe keep the .inc |
| 01:56.12 | dcordes | that sounds like softfloat? |
| 01:56.29 | infernix | <PROTECTED> |
| 01:56.40 | infernix | i don't know if vfp = soft or hard |
| 01:57.04 | infernix | i did see vfp as kernel option |
| 01:57.51 | dcordes | isn't it either soft or hard? |
| 01:57.52 | infernix | <PROTECTED> |
| 01:58.26 | infernix | i didnt enable |
| 01:58.33 | dcordes | where areyou? in the kernel? |
| 01:58.42 | dcordes | kernel config that is |
| 01:59.14 | dcordes | I though we were speaking of local.conf |
| 01:59.22 | infernix | both :) |
| 01:59.25 | infernix | im in 6th gear |
| 01:59.33 | dcordes | shit |
| 01:59.48 | dcordes | opposite here right now |
| 01:59.58 | dcordes | I assume kernel is ok. |
| 02:00.03 | infernix | what, reverse? :p |
| 02:00.11 | dcordes | not that bad yet |
| 02:00.15 | infernix | hehe |
| 02:00.35 | dcordes | aren't you already building an image with softfloat? |
| 02:00.39 | dcordes | in local.conf |
| 02:00.46 | infernix | the OE is built with -mfpu=vfp |
| 02:00.51 | infernix | but the kernel has no support for that built in |
| 02:00.57 | infernix | that cant be good |
| 02:01.09 | dcordes | where does it say -mfpu=vfp? |
| 02:01.12 | infernix | yeah that ones almost done |
| 02:01.15 | infernix | in the .inc |
| 02:01.25 | dcordes | ah gotcha |
| 02:02.15 | infernix | ill try a new kernel with my current vfp enabled initrd |
| 02:02.18 | dcordes | what does the kernelconfig description tell you about -mfpu=vfp? |
| 02:02.22 | infernix | see if i still get illegal description |
| 02:02.34 | infernix | make menuconfig |
| 02:02.47 | infernix | look for Floating point emulation ---> |
| 02:03.26 | dcordes | lol have no toolchain again |
| 02:03.35 | infernix | yeah you and your rm -rf :p |
| 02:04.00 | infernix | <PROTECTED> |
| 02:04.08 | dcordes | thx |
| 02:05.03 | dcordes | among anything rational I don't think androids do build with wrong cpu config stuff |
| 02:05.48 | infernix | vfp built in kernel, still illegal instruction s |
| 02:06.55 | dcordes | I hope it will work with old kernel and your softfloat image |
| 02:07.48 | infernix | either way, as long as we get illegal instructions, kaiser.conf is not right |
| 02:08.01 | dcordes | let's really assume kernel is ok... |
| 02:08.47 | infernix | well i see it building qemu now too |
| 02:08.50 | infernix | didnt see that before |
| 02:08.56 | dcordes | it always does |
| 02:08.58 | infernix | ok |
| 02:09.01 | Marex | gn |
| 02:09.05 | dcordes | night Marex |
| 02:09.08 | infernix | nn |
| 02:09.24 | dcordes | check your top while building. oe always needs it |
| 02:09.51 | infernix | NOTE: Running task 829 of 1413 |
| 02:09.58 | dcordes | you really quick |
| 02:10.06 | dcordes | 6th gear cpu also |
| 02:10.10 | infernix | still sometimes just 1 core used |
| 02:10.18 | infernix | threads=8 in local.conf |
| 02:12.53 | dcordes | infernix: do we have control over the backlight? |
| 02:16.29 | infernix | don't think so |
| 02:16.31 | infernix | but not sure |
| 02:16.35 | infernix | i did see screen blanking |
| 02:16.37 | infernix | but thats just console |
| 02:19.32 | infernix | dcordes: its possible that the vfp part of the chip isnt supported yet in kernel |
| 02:19.52 | infernix | dcordes: because this is part of the arm9 chip |
| 02:19.59 | infernix | which we have no control over yet, i think |
| 02:20.27 | infernix | "This is the first release of the Linux Kernel VFP support code. It provides support for the exceptions bounced from VFP hardware found on ARM926EJ-S." |
| 02:20.44 | dcordes | ok maybe we should consider disabling vfp in the inc then |
| 02:20.52 | infernix | i dropped the inc, fornow |
| 02:22.29 | infernix | <PROTECTED> |
| 02:22.31 | dcordes | so we have no fpu and no vfp in the arm11 to conclude? |
| 02:22.32 | infernix | also in the inc |
| 02:22.34 | infernix | we can include it |
| 02:22.42 | infernix | but config should be set to soft, not hard |
| 02:22.48 | dcordes | wait |
| 02:23.07 | infernix | look at this table: http://en.wikipedia.org/wiki/ARM_architecture |
| 02:23.08 | dcordes | we use the inc but take out the vfp? |
| 02:23.13 | infernix | find msm7200 |
| 02:23.22 | dcordes | aaah useful |
| 02:23.26 | infernix | "Qualcomm MSM7200 (with integrated ARM926EJ-S Coprocessor@274MHz, used in HTC TyTN II (Kaiser)" |
| 02:23.40 | dcordes | cool arm11 is uber cool hitec |
| 02:23.48 | infernix | this coprocessor contains the vfp stuff according to whats in the kernel vfp documentation |
| 02:24.20 | infernix | so you a) enable that in the kernel, b) include the inc, then c) set TARGET_FPU="soft" |
| 02:24.41 | infernix | thats what would make sense to me |
| 02:25.05 | infernix | so i'll re-bitbake with the inc |
| 02:25.09 | dcordes | sounds right but the big question is: why does google not build vfp? |
| 02:25.22 | infernix | and increase the threads while im at it |
| 02:25.34 | dcordes | infernix: just wait until softfloat-w/o-inc build is done |
| 02:25.37 | infernix | in the kernel you mean? |
| 02:25.43 | dcordes | yea right |
| 02:25.50 | infernix | no idea |
| 02:26.05 | dcordes | look at halibut defconfig |
| 02:26.23 | dcordes | in case that is fasten up things and is working, they definetly would have it in there. |
| 02:26.40 | infernix | is halibut the same chip? |
| 02:26.53 | dcordes | halibut is the development board swetland and friends work with |
| 02:26.57 | dcordes | it is msm7500A |
| 02:27.05 | infernix | does it have that coprocessor? |
| 02:27.10 | dcordes | yea |
| 02:27.34 | dcordes | you mean the arm9 by coprocessor? |
| 02:27.54 | infernix | yep[ |
| 02:28.02 | infernix | it seems so |
| 02:28.05 | infernix | http://www.scribd.com/doc/2605778/MSM7500A |
| 02:28.07 | dcordes | yep it's almost the same |
| 02:28.17 | dcordes | biggest difference is msm7500 is for cdma |
| 02:28.28 | dcordes | vogue is also 7500 (w/o the A) |
| 02:29.01 | dcordes | from the architecture and processing feature stuff they are all the same |
| 02:29.07 | infernix | qemu: unhandled CPU exception 0x9 - aborting |
| 02:29.09 | infernix | during bitbake |
| 02:29.21 | dcordes | never seen that |
| 02:29.57 | dcordes | it's because you have too many cores |
| 02:30.24 | infernix | :) |
| 02:30.30 | dcordes | does confuse OE |
| 02:31.06 | dcordes | so assuming that we have all the same stuff like halibut regarding processing we should not change anything to the kernel imo |
| 02:32.44 | infernix | sure we should |
| 02:32.48 | dcordes | oh no where the halibut defconfig gone |
| 02:32.54 | infernix | if its got vpf we should enable it |
| 02:33.00 | infernix | we're compiling for it |
| 02:33.41 | dcordes | nothing easier than testing this |
| 02:34.01 | dcordes | think my toolchain is baked well. looks crunchy brown |
| 02:35.16 | dcordes | This is needed |
| 02:35.19 | dcordes | if your hardware includes a VFP unit. |
| 02:35.30 | dcordes | if it is needed, how could we boot w/o it? |
| 02:38.19 | infernix | eglibc takes forever to compile |
| 02:39.03 | dcordes | e? |
| 02:39.11 | infernix | yea |
| 02:39.15 | infernix | NOTE: package eglibc-2.8+svnr5963-r5: task do_compile: started |
| 02:39.45 | infernix | hrm, if i use rdinit=/bin/sh, when I use 'less' it doesn't do any paging |
| 02:39.50 | infernix | it just acts like cat |
| 02:39.53 | dcordes | I build with angstrom mode glibc.. |
| 02:40.26 | dcordes | infernix: spits everything to stdout and exits? |
| 02:40.46 | infernix | y7up |
| 02:40.49 | dcordes | ok vfp zImage ready |
| 02:41.04 | dcordes | infernix: that image is definetly fucked I already deleted all of them |
| 02:41.15 | infernix | VFP support 0.3: not present |
| 02:41.18 | infernix | heh :) |
| 02:41.22 | dcordes | where? |
| 02:41.25 | infernix | in dmesg |
| 02:41.36 | dcordes | in kernel with vfp enabled? |
| 02:41.39 | infernix | yep |
| 02:41.46 | dcordes | good so we sorted out that |
| 02:42.10 | infernix | msmsdcc_ini_dma: DM non-cached buffer at blabla |
| 02:42.22 | infernix | msm_sdcc: probe of msm_sdcc.1 failed with error -1 |
| 02:42.27 | dcordes | so getting rid of vfp in the jez include file and setting softfloat would be the right way |
| 02:43.22 | infernix | i guess so but the other optimizations should still hold |
| 02:43.29 | infernix | anyway we should ask someone who really knows |
| 02:43.36 | dcordes | yea |
| 02:43.41 | infernix | i have another error |
| 02:43.44 | dcordes | I think xora just copied that stuff he seemed busy |
| 02:43.48 | infernix | qemu: unhandled CPU exception 0x9 - aborting |
| 02:44.16 | dcordes | you sure you setup the right parallelmakestuffs in local? |
| 02:47.25 | infernix | yea |
| 02:47.32 | infernix | it built before |
| 02:47.44 | infernix | http://rafb.net/p/UO254k34.html |
| 02:47.50 | infernix | thats what I think is correct for now |
| 02:48.47 | infernix | maybe even drop the -mfloat-abi=softfp |
| 02:49.49 | dcordes | if I knew what that means. |
| 02:50.16 | dcordes | m? float =soft floating point |
| 02:50.43 | dcordes | maybe it's the same as TARGET_FPU = "soft" |
| 02:52.32 | dcordes | btw you can also do a bitbake minimal-image instead of console-image |
| 02:52.35 | dcordes | half of the tasks |
| 02:53.45 | infernix | still need those tools |
| 02:53.51 | dcordes | which |
| 02:54.04 | infernix | i don't know |
| 02:54.11 | infernix | isnt minimal-image not bootable |
| 02:54.40 | dcordes | it is |
| 02:54.56 | dcordes | enough for our purpose |
| 02:56.00 | infernix | ok listen, vfp code in kernel uses get_copro_access() for its test routine whether if there is a vfp available |
| 02:56.11 | infernix | my guess is that that doesnt work yet |
| 02:56.17 | infernix | for msm7x000 |
| 02:56.27 | dcordes | I was also thinking something is yet missing.. |
| 02:56.32 | dcordes | still missing |
| 02:56.44 | dcordes | otherwise google buddies would have enabled it |
| 02:57.03 | dcordes | I'm building wiht the same config you pasted now. just that I kept it in the inc file |
| 03:00.21 | dcordes | infernix: you know poky? |
| 03:00.26 | infernix | nope |
| 03:00.36 | dcordes | www.pokylinux.org |
| 03:01.02 | dcordes | a distro similar to angstrom |
| 03:01.30 | dcordes | will need to build one of those for kaiser once we get further |
| 03:05.44 | dcordes | if you wanna try http://pokylinux.org/doc/poky-handbook.html#intro-quickstart-qemu |
| 03:07.55 | infernix | http://rafb.net/p/UO254k34.html |
| 03:07.57 | infernix | ops |
| 03:08.02 | infernix | i ment: |
| 03:08.02 | infernix | [ 312.305847] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 2 |
| 03:08.11 | infernix | on a nokia N800 |
| 03:09.40 | dcordes | what do they mean what part of what |
| 03:10.05 | infernix | ok |
| 03:10.07 | infernix | -mfloat-abi=softfp needs to go |
| 03:10.20 | dcordes | shit |
| 03:10.31 | dcordes | how did ya figure? |
| 03:10.47 | infernix | "VFP fpu support by setting -mfpu=vfp -mfloat-abi=softfp This should only be used on armv5 hardvare with a VFP9-S co processor. How this can be determined at compiletime is unknown. Some armv7 systems have a built in VFPv3 that can be enabled with -mfpu=vfp3 -mfloat-abi=softfp" |
| 03:10.52 | infernix | "NO FPU? use -mabi=aapcs-linux -mfloat-abi=soft -meabi=4" |
| 03:10.58 | dcordes | beurk |
| 03:11.20 | dcordes | rm -rf tmp |
| 03:11.43 | dcordes | my harddrive can do heavy bass |
| 03:12.03 | infernix | not sure on that NO FPU line tho |
| 03:12.06 | infernix | looking that up |
| 03:12.41 | dcordes | is that in kerneldocu? |
| 03:12.48 | infernix | no |
| 03:12.55 | infernix | ok the softfp has to go |
| 03:13.03 | infernix | but no need to add that other stuff |
| 03:13.12 | infernix | TARGET_FPU = "soft" should handle that |
| 03:14.00 | infernix | im quite sure that access to the VFP should be actively sought after but im not sure if its even possible |
| 03:14.22 | infernix | because isnt it set up in the kaiser that the coprocessor does the phone stuff? |
| 03:14.23 | dcordes | ok so we entirely get rid of the stuff provided by conf/machine/include/tune-arm1136jf-s.inc |
| 03:14.26 | infernix | or is that yet another processor |
| 03:14.45 | infernix | no just take the rafb.net paste and drop the -mfloat-abi=softfp |
| 03:14.56 | infernix | http://rafb.net/p/UO254k34.html minus -mfloat-abi=softfp |
| 03:15.05 | dcordes | have that already |
| 03:15.19 | infernix | you dontneed to rm -rf really |
| 03:15.23 | infernix | bitbake does the magic |
| 03:15.29 | infernix | saves a lot of downloading |
| 03:15.35 | *** join/#htc-linux Zoolooc (n=fredsiba@nrbg-4dbf962f.pool.einsundeins.de) |
| 03:16.11 | dcordes | nevermind just going to make sure |
| 03:17.09 | infernix | anyway back to the copro |
| 03:17.16 | infernix | what cpu does the phone software run on? |
| 03:17.42 | infernix | is the ARM926EJ-S Coprocessor@274MHz used for that oris there yet another chip |
| 03:18.26 | dcordes | to my knowledge only the two of them |
| 03:18.51 | infernix | CPU Core: ARM1136EJ-S RISC. Special Features: 274MHz ARM9 coprocessor, Embedded QDSP4000 and QDSP5000 DSP (GSM, GPRS/EGPRS Multislot Class 12, EDGE, UMTS/WCDMA, HSDPA, HSUPA, MBMS baseband), Embedded gpsOne GPS module, Qcamera, Qtv, Qcamcorder, Qvideophone |
| 03:19.44 | infernix | maybe some of the google guys can tell us more about the ARM926EJ-S Coprocessor, e.g. what it does and if vfp is accessible |
| 03:19.54 | infernix | it would speed up some things a lot |
| 03:21.01 | dcordes | brb |
| 03:25.36 | dcordes | infernix: cr2_ already knows what it does, at least to a certrain extent |
| 03:25.51 | dcordes | i runs a microkernel |
| 03:25.54 | dcordes | pistachio |
| 03:27.53 | infernix | my bitbake is messed up |
| 03:28.05 | dcordes | what does it do/say? |
| 03:28.16 | infernix | its missing all kinds of packages |
| 03:28.22 | infernix | its not rebuilding its dependencies i think |
| 03:28.39 | infernix | trying a new MACHINE= with different .conf name |
| 03:28.51 | dcordes | I know why I rm -rf after changing such low level stuff |
| 03:29.15 | infernix | yah but "Building for a different machine or C library is just a matter of changing the MACHINE= or ANGSTROM_MODE statement in local.conf to a new value. There is ABSOLUTELY no need for using different directories for that; Angstrom takes care of all the details, it was specifically designed for this." |
| 03:29.30 | dcordes | I know that |
| 03:29.39 | dcordes | it's not the first machine I'm building OE stuff for |
| 03:29.43 | dcordes | still better |
| 03:29.56 | dcordes | as you can see :) |
| 03:30.16 | dcordes | you sure can fix that manually what you see there. but a clear rebuild will also help |
| 03:31.09 | infernix | how do you feed OE a .config for the kernel? |
| 03:32.35 | dcordes | conf/machine/fubar.conf --> MACHINE = "fubar" in conf/local.conf |
| 03:32.53 | dcordes | ah for the kernel |
| 03:33.50 | dcordes | infernix: look at the do prepend thing in linux/kaiser-linux*bb |
| 03:33.53 | infernix | rm -rfs tmp |
| 03:34.51 | dcordes | do_configure_prepend() { cp .config ../defconfig |
| 03:34.53 | dcordes | } |
| 03:35.08 | infernix | yeah but that copies .config from the git repo to ../defconfig? |
| 03:35.48 | dcordes | that is relative to your workdir me think |
| 03:36.07 | dcordes | S = "${WORKDIR}/git" |
| 03:36.54 | dcordes | org.openembedded.dev/tmp/work/kaiser-angstrom-linux-gnueabi/linux-kaiser-2.6.24+gitf102b551df236570d85daff753c52f06b6099fd4-r0/git |
| 03:36.58 | dcordes | that'S teh workdir |
| 03:37.36 | dcordes | no workdir is work/kaiser-angstrom-linux-gnueabi/linux-kaiser-2.6.24+gitf102b551df236570d85daff753c52f06b6099fd4-r0 |
| 03:38.04 | dcordes | so obviously OE wants the .cofig as ${WORKDIR}/defconfig |
| 03:38.49 | dcordes | infernix: you can also make a bitbake -c patch virtual/kernel |
| 03:39.31 | dcordes | iirc it stops then after patching. you can go then into the source, do what you do and afterwards bitbake -c compile |
| 03:39.48 | infernix | what did you do btw to trigger those irq messages in msm_sdcc? |
| 03:40.09 | dcordes | that's because I'm uber1337 |
| 03:40.16 | infernix | ^^ |
| 03:40.36 | dcordes | don't you get them with the Raven_coda patching? |
| 03:40.40 | infernix | no |
| 03:40.53 | infernix | not in dmesg at least |
| 03:40.55 | dcordes | Raven_coda: told me he would see them with that patch |
| 03:41.01 | dcordes | that's where they should be |
| 03:41.17 | dcordes | hold one I'm digging out the initial sd patch |
| 03:41.21 | infernix | i get msm_sdcc: probe of msm_sdcc.1 failed with error -1 |
| 03:41.43 | dcordes | don't know whether I had that or not |
| 03:41.47 | dcordes | do you get Hz? |
| 03:41.51 | dcordes | or 0Hz |
| 03:42.29 | infernix | ACPU running at 384000 KHz |
| 03:42.43 | infernix | msm_i2c_probe c1k_ctl 715m 499999 Hz |
| 03:42.45 | dcordes | mmc0: ...? |
| 03:43.03 | infernix | nothing |
| 03:43.29 | infernix | kaiser_init_mmc: vreg enable failed (-1) |
| 03:43.35 | dcordes | good that I didn't remove my tree after Raven_coda told me it worked just fine |
| 03:43.53 | dcordes | I took vreg out |
| 03:44.08 | dcordes | infernix: you told me earlier how I would make a more clean diff of my tree? |
| 03:44.28 | infernix | diff log |
| 03:44.31 | infernix | what's the top commit? |
| 03:44.36 | infernix | one by google? |
| 03:44.45 | infernix | i mean |
| 03:44.46 | infernix | git log |
| 03:45.15 | dcordes | diff log Merge branch 'msm-2.6.24' into android-msm |
| 03:45.33 | dcordes | w/o the difflog |
| 03:45.35 | dcordes | ^^ |
| 03:45.36 | infernix | mm mine is Merge branch 'android' into android-msm |
| 03:46.02 | infernix | but anyway, do a git commit -a |
| 03:46.06 | infernix | does it ask you to add any files? |
| 03:46.16 | dcordes | against the normal tree |
| 03:46.23 | dcordes | they are millions of files changed |
| 03:46.29 | dcordes | all the dzo stuff |
| 03:46.42 | dcordes | arg fux where's my sd patch |
| 03:46.54 | infernix | git commit -a should just diff against android-msm that you checked out |
| 03:47.31 | dcordes | sheet I have no git access |
| 03:47.32 | dcordes | fatal: empty ident <lukas@box.(none)> not allowed |
| 03:47.50 | infernix | it should just commit it locally |
| 03:47.52 | dcordes | might apply for google job |
| 03:48.35 | infernix | try gif diff origin/android-msm |
| 03:48.39 | infernix | *git diff |
| 03:48.54 | dcordes | ah ok I had just to put in namestuffs |
| 03:49.11 | dcordes | # Please enter the commit message for your changes. |
| 03:49.16 | infernix | oh |
| 03:49.17 | dcordes | you sure that's right what I'm doing? |
| 03:49.18 | infernix | do a make clean first |
| 03:49.24 | infernix | don't commit it |
| 03:49.30 | dcordes | oh noes |
| 03:49.35 | infernix | how many files do you need to add? |
| 03:49.40 | dcordes | now it says recording |
| 03:50.31 | dcordes | it is 4 files being modified for sd |
| 03:51.17 | dcordes | ha! found the initial sd patch |
| 03:51.31 | dcordes | http://rafb.net/p/jonaZL10.html |
| 03:51.43 | dcordes | read a fucking book? |
| 03:52.39 | dcordes | it is just for your comprehension of what I did for SD to work |
| 03:52.57 | dcordes | among that, you also need to put sdc init into the board.c |
| 03:53.19 | dcordes | and correct some easy things when it fails to compile but that is the gist in the paste |
| 03:54.44 | infernix | this patch is already in raven_coda's patch |
| 03:54.52 | infernix | whats this about sdc init? |
| 03:56.27 | dcordes | when you compile with that you will notice you have to comment out vreg |
| 03:56.49 | dcordes | look at the board-htcvogue.c http://rafb.net/p/JXjrIl26.html |
| 03:56.54 | dcordes | init is in there |
| 03:57.09 | dcordes | just apply the whole blob in case you're brave |
| 03:57.30 | dcordes | don't know against which revision I diffed that now |
| 03:57.52 | dcordes | I did try git diff origin/android-msm |
| 03:58.20 | dcordes | basically my whole tree is the marbalon2.0 patch plus my sd patch |
| 03:58.49 | infernix | hey, what do you know about the state of usb? |
| 03:58.57 | infernix | theres code for it in the htckaiser.c |
| 03:59.20 | dcordes | yes because htckaiser.c = htcvogue.c |
| 03:59.46 | dcordes | board-htcvogue.c that is |
| 04:00.20 | dcordes | and board-htcvogue.c has usb stuff since dzo published them |
| 04:00.31 | dcordes | dem patchez |
| 04:02.39 | dcordes | infernix: you figured what's wrong in your tree/raven_coda's patch which prevents your sdc from 'working'? |
| 04:02.47 | infernix | no |
| 04:03.02 | infernix | all i'm seeing so far is that raven incorporated everything you're throwing at me |
| 04:03.06 | dcordes | I bet it has something to do with vreg |
| 04:03.47 | dcordes | throws whiskey bottle |
| 04:03.54 | infernix | ok here's some changes |
| 04:04.11 | infernix | in http://rafb.net/p/JXjrIl26.html, drivers/mmc/host/msm_sdcc.c differs somewhat |
| 04:04.57 | dcordes | I will stick with my tree!! no matter what to come |
| 04:06.23 | dcordes | infernix: guess he forgot to purge resume/suspend functionallities |
| 04:06.35 | infernix | its much of this PIO Stuff thats missing |
| 04:06.44 | dcordes | what's that |
| 04:06.59 | infernix | but not just that |
| 04:08.09 | infernix | can you do a grep 'Setup DMA' in drivers/mmc/host/msm_sdcc.c |
| 04:08.13 | dcordes | just get a clear $srcrevwehaveinOE apply marbalon and put in my sd stuff manually |
| 04:08.40 | dcordes | 0 |
| 04:08.41 | infernix | ravens patches are nicer really |
| 04:08.47 | dcordes | no they arent |
| 04:08.51 | dcordes | I like mine better |
| 04:08.59 | dcordes | :D |
| 04:09.20 | dcordes | I have many years of c experience and am not taking this! |
| 04:09.24 | infernix | then get me a good diff |
| 04:09.45 | infernix | i'll try applying these sdcc patches |
| 04:09.58 | dcordes | the second rafb is what you told me to do with git.diff |
| 04:12.11 | dcordes | any useful? |
| 04:14.28 | infernix | i have different code now for sdcc |
| 04:14.37 | infernix | after applying ravens patch |
| 04:15.13 | infernix | but i only patched drivers/mmc/host/msm_sdcc.c and drivers/mmc/host/msm_sdcc.h |
| 04:15.26 | infernix | the rest is the same, just different way of including |
| 04:15.53 | dcordes | he said it would work and he had seen a clck frequency |
| 04:16.15 | infernix | include/asm-arm/arch-msm/entry-macro.S is different too |
| 04:16.27 | dcordes | didn't change that |
| 04:17.53 | dcordes | infernix: got a bin that spit the illegal instruction message? |
| 04:18.16 | infernix | you don't have one? |
| 04:18.28 | infernix | a bin, no, an initrd yea |
| 04:19.04 | dcordes | infernix: nono I'm looking for the name of a program that spit the illegal instruction error sorry |
| 04:19.15 | infernix | sysctl |
| 04:19.34 | dcordes | no error |
| 04:19.50 | infernix | your build is done? |
| 04:19.56 | dcordes | of course! |
| 04:20.08 | infernix | >.< |
| 04:20.25 | dcordes | that's that gentoo crap telling ya. goold old binary distro |
| 04:20.34 | infernix | i shall debootstrap a 32bit sid |
| 04:20.37 | infernix | for that psyco jit thing |
| 04:20.41 | infernix | should speed up things |
| 04:20.48 | dcordes | people told me it's useful |
| 04:21.10 | dcordes | and it doesn't say Warning you're not using pysco!! |
| 04:21.32 | dcordes | are you building inside a vm? |
| 04:21.38 | infernix | no |
| 04:21.45 | infernix | 64bit sid chroot |
| 04:21.58 | dcordes | why chroot? |
| 04:22.06 | infernix | running etch |
| 04:22.15 | infernix | need stability on this workstation |
| 04:22.25 | infernix | chroot gives easy access to unstable without risk |
| 04:22.26 | dcordes | that sounds broken |
| 04:22.42 | infernix | how? |
| 04:22.42 | dcordes | so you chroot from your gentoo to sid to build? |
| 04:22.49 | dcordes | no idea maybe because I never tried ;) |
| 04:22.56 | infernix | no i run debian etch 4.0 amd64, which is the stable branch |
| 04:23.04 | dcordes | ah got it |
| 04:23.11 | infernix | and sid is always in development hence always gets updates and might break severely without notice |
| 04:23.14 | dcordes | didn't you say you were using gentoo? |
| 04:23.22 | infernix | thats raven |
| 04:23.29 | dcordes | I'm going to switch to debian |
| 04:24.22 | infernix | im going to switch to bed soon |
| 04:24.52 | infernix | ill run bitbake world :D |
| 04:24.56 | dcordes | ah right that was raven |
| 04:25.32 | dcordes | no good idea it will fail on libzaziki2_git.bb |
| 04:26.10 | infernix | oh |
| 04:26.21 | dcordes | I'm not surrendering until I have the console image working in a way |
| 04:26.42 | infernix | youve built it and booted it? |
| 04:26.47 | infernix | still the same issue? |
| 04:26.52 | dcordes | eh? |
| 04:27.01 | dcordes | I told ya: no illegal |
| 04:27.18 | dcordes | not an illegal instruction error |
| 04:27.26 | infernix | so it works then, right |
| 04:27.27 | dcordes | in the minimalist |
| 04:27.32 | dcordes | obviously |
| 04:27.33 | infernix | oh |
| 04:27.41 | dcordes | I don't know what to try further? any clue? |
| 04:28.49 | dcordes | shall I email you the minimal? |
| 04:33.30 | infernix | im still building |
| 04:34.12 | dcordes | infernix: still the same situation with mount breakage as assumed |
| 04:34.27 | dcordes | when is mtab usually created? |
| 04:34.56 | infernix | at boot |
| 04:35.18 | dcordes | maybe it's empty when nothing is mounted? |
| 04:36.35 | dcordes | mount -a -> warning can't open /etc/mtab |
| 04:37.37 | infernix | touch /etc/mtab |
| 04:37.39 | infernix | mount -a |
| 04:38.57 | dcordes | cool now it shows up two tmpfs in df -h |
| 04:39.10 | dcordes | of size 58.4K each |
| 04:39.39 | dcordes | one mounted in /var/volatile one in /media/ram |
| 04:42.01 | infernix | you disabled rc = vreg_enable(vreg_mmc) ? |
| 04:42.19 | dcordes | could you point me to the file? |
| 04:42.58 | infernix | "arch/arm/mach-msm/board-htckaiser.c" line 286 |
| 04:43.15 | infernix | oh wait you're on marbalons code? |
| 04:43.24 | dcordes | I'm en vogue ;) |
| 04:43.28 | dcordes | always |
| 04:44.22 | dcordes | /*vreg_mmc = vreg_get(0, "mmc"); |
| 04:44.22 | dcordes | rc = vreg_enable(vreg_mmc);*/ |
| 04:45.05 | infernix | ok |
| 04:45.21 | infernix | NOTE: Running task 1038 of 1479 |
| 04:45.33 | dcordes | of console? |
| 04:45.33 | infernix | what about the usb? |
| 04:45.41 | infernix | i see all sorts of usb code in there, does it work? |
| 04:45.44 | dcordes | yea usb... clueless |
| 04:45.49 | dcordes | didn't try |
| 04:46.16 | dcordes | ah yes I built a hardcore image yesterday after getting up. with everything configured in which got in my way. also usb but didn't work |
| 04:46.21 | dcordes | was like 1,6M |
| 04:47.55 | dcordes | I hope cr2 will help me a bit with SD today |
| 04:49.57 | infernix | sdcc not working |
| 04:50.08 | dcordes | compiled? |
| 04:50.44 | infernix | yea |
| 04:50.50 | dcordes | sucks |
| 04:51.19 | dcordes | I have a tar.bz2 of my cleaned tree with marbalon2+sd working |
| 04:51.28 | infernix | great |
| 04:51.30 | infernix | where?:) |
| 04:51.41 | dcordes | 300mb can upload |
| 04:51.51 | infernix | http://dx.infernix.net/upload/ |
| 04:51.58 | dcordes | ftp? |
| 04:52.01 | infernix | http |
| 04:52.08 | infernix | php accepts 500mb |
| 04:52.11 | infernix | should work |
| 04:52.31 | dcordes | laugh at me but how would I send it? |
| 04:53.55 | dcordes | infernix: Not Found |
| 04:55.30 | infernix | http://dx.infernix.net/uploader/ |
| 04:55.33 | dcordes | I will just upload to one of those crappy upload sites |
| 04:55.36 | infernix | sorry:) |
| 04:55.46 | infernix | no don't |
| 04:55.48 | infernix | use this one |
| 04:55.57 | infernix | ill stick it on http://dx.infernix.net/kaiser/ later |
| 04:56.50 | dcordes | already uploading |
| 04:57.20 | dcordes | can't harm having a kernel source on their servers among all the porn and justin_timberlake.mp3 |
| 04:58.07 | dcordes | infernix: can't acceys your website |
| 05:00.38 | infernix | huh? |
| 05:00.49 | infernix | http://dx.infernix.net/uploader/ doesnt work? are you on ipv6? |
| 05:01.30 | dcordes | lol no I'm just a bit drunk |
| 05:01.34 | dcordes | didn't see the link |
| 05:02.18 | dcordes | no status bar? |
| 05:05.55 | infernix | nope |
| 05:05.59 | infernix | next month :) |
| 05:07.09 | dcordes | gogogo |
| 05:07.10 | infernix | NOTE: package console-image-1.0-r0: task do_build: completed |
| 05:07.19 | dcordes | heheehe I'm already in it |
| 05:07.37 | dcordes | cool have mplayer on kaiser |
| 05:08.03 | dcordes | and gnu nano |
| 05:08.23 | dcordes | we seriously need ctrl,|,<,> |
| 05:09.19 | infernix | win key can be remapped |
| 05:09.36 | infernix | winkey + arrow keys can be used for those keys |
| 05:09.45 | infernix | or just run X and an onscreen kbd |
| 05:10.21 | dcordes | we need it on they keyboard live and direct |
| 05:13.10 | infernix | k well works out of the box now |
| 05:13.23 | infernix | building x11 :) |
| 05:16.05 | dcordes | yep I'm already seeing the calibration screen in front of me |
| 05:19.14 | infernix | i'm building a dozen images, gonna get some sleep |
| 05:19.18 | infernix | n8 :) |
| 05:19.25 | dcordes | n8n8 |
| 05:19.54 | dcordes | cya today |
| 05:38.52 | *** join/#htc-linux mib_5kwsf5 (i=180af19c@gateway/web/ajax/mibbit.com/x-2e643496ad166a93) |
| 05:39.19 | mib_5kwsf5 | infernix, you still around? |
| 05:40.24 | mib_5kwsf5 | all you have to do to get Reaven_coda's patch to show you that is change msm_proc_comm in 7x00-smd to return 0 |
| 07:02.52 | *** join/#htc-linux LunohoD_ (n=alex@e180068170.adsl.alicedsl.de) |
| 07:56.40 | *** join/#htc-linux JohnnyK (n=johnnyk@area1-33-gw.hkfree.org) |
| 08:08.44 | *** join/#htc-linux rmoravcik (n=rmoravci@adsl-dyn8.78-98-50.t-com.sk) |
| 09:28.44 | *** join/#htc-linux kiozen (n=kiozen@rgnb-4db1dd98.pool.einsundeins.de) |
| 10:20.56 | *** join/#htc-linux MHazem (n=GoD@196.205.193.110) |
| 10:23.34 | *** join/#htc-linux patoche (n=patoche@lns-bzn-28-82-250-174-241.adsl.proxad.net) |
| 10:24.45 | *** join/#htc-linux patoche (n=patoche@lns-bzn-28-82-250-174-241.adsl.proxad.net) |
| 10:38.28 | *** join/#htc-linux rmoravci1 (n=rmoravci@adsl-dyn8.78-98-50.t-com.sk) |
| 10:46.03 | *** join/#htc-linux Marex (n=marex@85-132-216-250-eth3-gwfm10-user.802.cz) |
| 11:20.19 | *** join/#htc-linux AlGe (n=alge@chello080109231226.4.uni-klu.teleweb.at) |
| 11:29.04 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 11:42.12 | *** join/#htc-linux dzo (n=dzo@121.98.128.127) |
| 11:55.38 | BabelO | hi |
| 11:57.42 | AlGe | hi |
| 12:09.42 | kiozen | ho |
| 12:15.55 | BabelO | ola :) |
| 12:17.48 | AlGe | I have read a lot of kaiser progress lately here, is that device really becoming an option sooner or later? |
| 12:17.53 | BabelO | cr2_: this .lst is better than the previous :) |
| 12:18.22 | BabelO | AlGe: i think so |
| 13:12.48 | *** join/#htc-linux CVirus (n=GoD@196.205.193.110) |
| 13:29.49 | *** join/#htc-linux exco (n=excogita@e181126132.adsl.alicedsl.de) |
| 13:29.57 | exco | howdy |
| 13:32.08 | exco | can I contribute in any way to the further improving the Linux on HTC Magician? |
| 13:37.25 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 14:06.39 | dcordes | AlGe: you bet :) |
| 14:08.08 | exco | ? |
| 14:08.24 | exco | I hope so :-) |
| 14:08.40 | dcordes | hi exco |
| 14:08.51 | exco | hi dcordes |
| 14:09.18 | exco | I'm currently trying to figure out if the information on the wiki is up to date |
| 14:09.19 | *** join/#htc-linux SmallR2002 (n=SmallR20@79-69-20-242.dynamic.dsl.as9105.com) |
| 14:09.42 | exco | by trying the the latest kernel + haret on the Magician |
| 14:10.22 | exco | how can I contribute? |
| 14:10.48 | dcordes | good question. I do not know much about the magician status |
| 14:11.38 | exco | it's b- |
| 14:11.53 | exco | but I don't know if there's anybody currently working on it |
| 14:12.03 | exco | the mailinglist is "quiet" |
| 14:12.46 | *** join/#htc-linux p3t3r__ (n=root@wlan.net-you.de) |
| 14:13.26 | zwox | hi there |
| 14:13.35 | p3t3r__ | hi |
| 14:13.48 | exco | hi |
| 14:14.09 | dcordes | infernix: file succesfully uploaded |
| 14:14.42 | zwox | is there a way to cid unlock a htc hermes ? because on xda website, on the link sim and cid unlock, there's almost nothing interresting |
| 14:15.05 | exco | cid ... htc-linux? |
| 14:15.26 | zwox | i'm asking here just in case |
| 14:15.41 | zwox | but doesn't matter |
| 14:15.54 | exco | I'd say your best bet is the forum |
| 14:16.00 | zwox | i have an other one which is supercid and that i'm reversing |
| 14:16.08 | p3t3r__ | (i am in here using pidgin on my htc universal and it s fun :-D) |
| 14:16.12 | zwox | thanks |
| 14:17.13 | exco | cool |
| 14:17.32 | *** part/#htc-linux p3t3r__ (n=root@wlan.net-you.de) |
| 14:18.01 | zwox | that could be nice to have a todo for the linux port on hermes |
| 14:18.15 | zwox | maybe there is one, but i didn't find it |
| 14:24.33 | dcordes | I think there is not much doku for hermes although it has already some supported features afiak. ask cr2_ he's the hermes dude |
| 14:27.32 | exco | I think I just killed an SD-card... |
| 14:29.59 | dcordes | I though often I killed one but in most cases reformart fixes things |
| 14:30.18 | exco | but if it doesn't get recognized anymore? |
| 14:31.14 | dcordes | you don't get a /dev for it? |
| 14:31.21 | exco | no |
| 14:31.25 | dcordes | oh |
| 14:31.29 | exco | :-) |
| 14:32.04 | dcordes | once I fixed one in windows but that just had a bit broken vfat |
| 14:32.22 | exco | tried to make 2 partitions (first using gui - of course - (gparted) and then fdisk but seems I didn't close gparted) |
| 14:32.36 | exco | and somehow that didn't end well |
| 14:33.45 | exco | or I'm just not experienced enough in linux... so... back to the forums/wikis |
| 14:33.54 | dcordes | I guess it would be more clean to do bother either in one program or the other |
| 14:34.10 | dcordes | s/bother/both/ |
| 14:34.47 | *** join/#htc-linux lamikr (n=lamikr@dyn60-31.dsl.spy.dnainternet.fi) |
| 14:36.24 | exco | yes |
| 14:36.50 | exco | but I just opened a console and didn't see the gparted window behind the firefox... you know out of sight... |
| 14:37.34 | exco | out of mind... (if that's a phrase in english) |
| 14:38.19 | *** join/#htc-linux rob_w (n=bob@X1d92.x.pppool.de) |
| 14:39.24 | exco | oh... it's not dead... just doesn't automount anymore ... and isn't /dev/sdb anymore... good :-) |
| 14:40.40 | dcordes | out the augen out the sinn or what |
| 14:40.55 | exco | hahaha |
| 14:41.04 | exco | sag bloà |
| 15:23.51 | *** join/#htc-linux zwox (i=zwox@par69-7-82-243-234-94.fbx.proxad.net) |
| 15:38.28 | *** join/#htc-linux exco (n=excogita@e181126132.adsl.alicedsl.de) |
| 15:45.39 | exco | totally uncool... |
| 15:46.01 | exco | tested the latest files for magician from http://linuxtogo.org/~ph5/magician/ |
| 15:47.33 | exco | made a hardreset |
| 16:12.34 | *** join/#htc-linux miknix (n=miknix@81.193.89.101) |
| 16:14.04 | *** join/#htc-linux aaronpk (n=aaron@c-71-59-210-160.hsd1.or.comcast.net) |
| 16:20.08 | *** join/#htc-linux surgex0 (n=surge@pool-71-186-234-216.bflony.fios.verizon.net) |
| 16:22.04 | exco | ok... should have read more first... |
| 16:22.07 | *** part/#htc-linux exco (n=excogita@e181126132.adsl.alicedsl.de) |
| 16:22.57 | *** join/#htc-linux goxboxlive (n=goxboxli@208.84-48-176.nextgentel.com) |
| 16:32.04 | *** join/#htc-linux exco (n=excogita@e181126132.adsl.alicedsl.de) |
| 16:53.08 | *** join/#htc-linux patoche (n=patoche@lns-bzn-28-82-250-174-241.adsl.proxad.net) |
| 17:06.58 | *** join/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-870afdc7afdfe746) |
| 17:11.45 | cr2_ | hi |
| 17:11.51 | exco | hi |
| 17:11.59 | cr2_ | kiozen: do you have a GT windows binary ? |
| 17:12.20 | kiozen | cr2_: can do.. |
| 17:12.34 | kiozen | have to change os |
| 17:12.36 | kiozen | bbl |
| 17:20.12 | dcordes | hi cr2_ |
| 17:28.45 | *** part/#htc-linux exco (n=excogita@e181126132.adsl.alicedsl.de) |
| 17:28.55 | BabelO | hello cr2_, kio |
| 17:33.06 | cr2_ | hi BabelO |
| 17:33.09 | cr2_ | hi dcordes |
| 17:35.30 | miknix | GT windows? |
| 17:37.27 | BabelO | miknix: it is a mapsapplication made by kiozen for GPS |
| 17:37.52 | miknix | oh |
| 17:39.07 | miknix | I was imagining some hacked version of windows mobile to provided more utility |
| 17:39.23 | miknix | wm5 is really useless though : \ |
| 17:40.33 | cr2_ | miknix: lol. http://www.standishgroup.com/newsroom/open_source.php |
| 17:43.19 | miknix | cr2_, opensource is starting to have real importance on the stock markets and software companies |
| 17:43.57 | miknix | cr2_, IMHO, companies will get the wrong idea about OSS and this will go all into shit |
| 17:46.05 | *** join/#htc-linux kiozen (n=kiozen@rgnb-4db1dd98.pool.einsundeins.de) |
| 17:46.36 | kiozen | cr2_: sorry you have to wait until tomorrow, I was interrupted and have to go :) |
| 17:46.42 | kiozen | bbl |
| 18:09.18 | *** join/#htc-linux zwox (i=zwox@par69-7-82-243-234-94.fbx.proxad.net) |
| 18:11.47 | *** join/#htc-linux marbalon (n=balon@aegx237.neoplus.adsl.tpnet.pl) |
| 18:16.44 | *** join/#htc-linux infernixx (n=nix@unaffiliated/infernix) |
| 18:17.30 | infernixx | hai |
| 18:17.34 | BabelO | cr2_: http://pastebin.ca/998584 |
| 18:17.43 | infernixx | dcordes: mornin? |
| 18:19.01 | BabelO | cr2_: if you want i can resend you GT |
| 18:21.20 | goxboxlive | GT as Gin and Tonic ? |
| 18:21.38 | BabelO | lol |
| 18:21.51 | goxboxlive | BabelO: any Qtopia 4.4 news? |
| 18:21.53 | BabelO | hello goxboxlive, how are you? |
| 18:22.01 | BabelO | goxboxlive: no still no news |
| 18:22.02 | goxboxlive | BabelO: i'm fine, and you? |
| 18:22.04 | goxboxlive | i c |
| 18:22.25 | BabelO | goxboxlive: yes good, working on artemis ts support |
| 18:22.49 | goxboxlive | ok, so you are able to boot it right? |
| 18:22.54 | cr2_ | BabelO: ok, i'd like to check it. |
| 18:24.00 | BabelO | cr2_: last compile ? |
| 18:24.06 | cr2_ | yes |
| 18:24.55 | cr2_ | BabelO: does your htc-egpio driver work ? |
| 18:29.41 | dcordes | infernixx: nah got up early today. 5pm |
| 18:29.47 | infernixx | hah, 3pm! |
| 18:30.04 | dcordes | tried x11 image. doesn't boot |
| 18:30.08 | infernixx | i cant boot the 16mb x11-gpe image |
| 18:30.08 | dcordes | hangs in haret |
| 18:30.13 | infernixx | yep |
| 18:30.20 | infernixx | it built only one or two others |
| 18:30.25 | dcordes | I have a fully fledged x11-image |
| 18:30.47 | dcordes | 20M |
| 18:31.07 | dcordes | minimal and console boot fine though |
| 18:31.41 | infernixx | trolltech-qtopia-core-gui-image-kaiser-novfp.cpio.gz |
| 18:31.54 | infernixx | 9mb |
| 18:31.57 | infernixx | not sure what it can do tho |
| 18:32.23 | infernixx | do you have the logs of 07:00 today? |
| 18:32.35 | infernixx | there was someone who said something about ravens sdcc code |
| 18:32.44 | infernixx | can you quote it? |
| 18:34.04 | dcordes | infernixx: hm my image filenames don't have the novfp bit |
| 18:34.31 | infernixx | oh thats the machine name i configurede |
| 18:34.31 | dcordes | 07:39 < mib_5kwsf5> infernix, you still around? |
| 18:34.31 | dcordes | 07:40 < mib_5kwsf5> all you have to do to get Reaven_coda's patch to show you that is change msm_proc_comm in 7x00-smd to return 0 |
| 18:34.37 | infernixx | kaiser-novfp.conf |
| 18:34.39 | dcordes | ok |
| 18:34.52 | infernixx | right, thanks, gonna try that |
| 18:35.14 | dcordes | maybe he can default that for now |
| 18:35.39 | infernixx | booting qtopia-core |
| 18:35.44 | infernixx | success |
| 18:37.06 | dcordes | nice |
| 18:37.18 | marbalon | hi everyone |
| 18:37.30 | dcordes | hi marbalon |
| 18:37.40 | marbalon | dcordes: any progress with other BA ? |
| 18:38.06 | dcordes | it is gainig dust since kaiser works |
| 18:38.12 | cr2_ | BabelO: i'm missing only one thing in .lst : replacing the 0xfff* with names. |
| 18:38.24 | dcordes | infernixx: can you do stuff in it? |
| 18:38.38 | infernixx | yesh but it seems like its the same as console image |
| 18:38.38 | infernixx | no X |
| 18:38.55 | cr2_ | dcordes: lol. you can't just compare ba and kaiser. on ba mostly everything works. |
| 18:39.14 | BabelO | cr2_: htc-egpio does not work, when i use sthe EGPIO_* with standard function it hang |
| 18:39.37 | dcordes | cr2_: I didn't do that |
| 18:39.54 | BabelO | cr2_: QLandkarteGT give me one error message while compiling with error C3861: 'rint': identifier not found |
| 18:39.59 | *** join/#htc-linux patoche (n=patoche@lns-bzn-28-82-250-174-241.adsl.proxad.net) |
| 18:40.03 | dcordes | I just say I don't do anything with BA lately |
| 18:40.07 | marbalon | dcordes: I have working ts ;) include Y pos !!! |
| 18:40.17 | dcordes | on kaiser? |
| 18:40.21 | marbalon | yes |
| 18:40.23 | cr2_ | BabelO: ceil/floor ? |
| 18:40.35 | dcordes | marbalon: in driver level |
| 18:40.45 | marbalon | yes |
| 18:41.09 | dcordes | nice can you pastebin the vogue-ts somewhere? |
| 18:41.15 | BabelO | cr2_: ah ok yes i look with floor |
| 18:41.19 | cr2_ | BabelO: rint is bsd-only |
| 18:41.52 | marbalon | dcordes: yes, moment |
| 18:42.00 | miknix | cr2_, http://radar.oreilly.com/archives/2008/04/open-source-award-nominations.html |
| 18:42.24 | cr2_ | BabelO: it's non-ansi and non-posix |
| 18:43.21 | marbalon | dcordes: http://baliniak.pl/android/kaiser-ts.c |
| 18:43.43 | marbalon | strange combination but works !!! |
| 18:44.22 | dcordes | marbalon: great thanks |
| 18:44.38 | dcordes | I can show off a bit with the android ramdisk then at bbq :) |
| 18:44.51 | dcordes | infernixx: what's going on in qtopia core image? |
| 18:45.05 | marbalon | dcordes: you can navigate android with stylus without any problems ;) |
| 18:45.06 | dcordes | marbalon: you work with the Raven_coda clean tree now? |
| 18:45.38 | dcordes | Raven_coda: do you have a patch that works against latest revision? |
| 18:46.28 | marbalon | no, I gen an update now, an try to combine Raven_coda patch + keyboard driver and ts fix |
| 18:46.37 | marbalon | *get |
| 18:47.07 | dcordes | marbalon: against latest rev? (there are some problems with Raven_coda patch and latest commits) |
| 18:47.14 | infernixx | dcordes: nothing exciting |
| 18:47.30 | BabelO | cr2_: mail sent :) |
| 18:47.40 | dcordes | infernixx: does ts work there? |
| 18:47.46 | infernixx | dcordes: its console |
| 18:47.52 | infernixx | and there's no problems with ravens patch here |
| 18:47.53 | dcordes | o I see |
| 18:47.56 | marbalon | dcordes: what king of problems, fb ? |
| 18:47.57 | infernixx | im enabliing the sdcc stuff now |
| 18:48.28 | infernixx | only interesting changes were in drivers/mmc/host/msm_sdcc.c |
| 18:48.35 | dcordes | infernixx ah that was because you tried to build against wrong branch right? |
| 18:48.40 | dcordes | the not working with latest tree thing |
| 18:48.40 | infernixx | should just ask him if he incorporated them |
| 18:48.47 | infernixx | eyah |
| 18:48.51 | dcordes | good |
| 18:49.00 | dcordes | marbalon: sorry works fine |
| 18:49.05 | dcordes | no problems |
| 18:50.11 | marbalon | dcordes: any url to lastest Raven_coda patch? |
| 18:50.23 | dcordes | infernixx: ? |
| 18:50.53 | infernixx | mmc0: transaction lblablabla timeout |
| 18:51.01 | infernixx | yah its in the kaiser thread on xda-dev |
| 18:51.03 | infernixx | diff.zip |
| 18:51.07 | dcordes | infernixx: check against the tree I sent you |
| 18:51.47 | infernixx | irq 109 i think it says |
| 18:52.39 | dcordes | marbalon: http://forum.xda-developers.com/attachment.php?attachmentid=83084&d=1209078801 |
| 18:52.44 | marbalon | dcordes: ok, thanks |
| 18:53.27 | infernixx | clock 0Hz |
| 18:54.16 | dcordes | infernixx: you sure? at the beginning it spits me online 0Hz or two and then a second later the clock is there |
| 18:54.36 | infernixx | it gives a lot of stuff |
| 18:54.44 | dcordes | yea true |
| 18:54.58 | dcordes | I looked throug the logs in vi |
| 18:55.19 | dcordes | although you can't see the full line because of no arrow keys, it's less of a pain than with dmesg |
| 18:55.22 | dcordes | or logread |
| 18:55.32 | infernixx | dmesg > /var/log/dmesg |
| 18:55.34 | infernixx | less dmesg |
| 18:56.08 | cr2_ | BabelO: hmm. i've removed the old qt4 dlls ;) |
| 18:56.11 | Marex | cr2_, hi, are you around? I will have a patch for you soon |
| 18:56.17 | Marex | ah :D |
| 18:56.29 | cr2_ | Marex: which one ? |
| 18:56.39 | dcordes | infernixx: that was also very shity here. even with 4x6 font |
| 18:56.48 | marbalon | dcordes, infernix do you have any initrd file wit i2c-tools ? |
| 18:56.49 | Marex | cr2_, for palmtt5 to add suspend-to-mem support |
| 18:57.00 | BabelO | cr2_: i ll send you the dlls |
| 18:57.05 | Marex | I can now suspend and wakeup using palmtt5 bootloader in DoCG3 |
| 18:57.07 | Marex | :) |
| 18:57.09 | dcordes | marbalon: I look in OE, moment |
| 18:57.09 | Marex | cr2_, ^ |
| 18:57.12 | cr2_ | BabelO: can you create a full working .zip ? or tell me what do i need. |
| 18:57.13 | infernixx | dcordes: no, but i can build one |
| 18:57.22 | infernixx | s/dcordes/marbalon/ |
| 18:57.30 | cr2_ | Marex: nice :) you'd check n560 then :) |
| 18:57.38 | Marex | :D |
| 18:57.39 | infernixx | marbalon: get our new kaiser.conf for OE |
| 18:57.49 | infernixx | dcordes should have a rafb.net paste of it |
| 18:57.51 | Marex | cr2_, n560 does wakeup, doesnt it ? |
| 18:57.56 | cr2_ | no |
| 18:58.03 | Marex | hides |
| 18:58.05 | cr2_ | it wakes up into wince |
| 18:58.10 | Marex | I see |
| 18:58.22 | Marex | well I used qemu and onjdump ... lots of reverse engineering etc |
| 18:58.36 | Marex | I will try taking a look |
| 18:58.42 | marbalon | infernix: I try to setup OE but it is a long proces... |
| 18:58.55 | dcordes | no need |
| 18:58.56 | cr2_ | Marex: thanks. i want to finish lcdspi first. |
| 18:59.06 | dcordes | marbalon: does it have a project website? |
| 18:59.07 | Marex | ok |
| 18:59.51 | dcordes | freshmeat |
| 18:59.58 | cr2_ | miknix: btw, can you trace the i2c port ? |
| 19:00.06 | miknix | cr2_, course |
| 19:00.20 | marbalon | dcordes: i2c-toos ? |
| 19:00.22 | cr2_ | miknix: it's not obvious that you'll see something |
| 19:00.48 | dcordes | marbalon: yes. I think it is on freshmeat.net but I can't access this website |
| 19:00.52 | cr2_ | miknix: you can also try i2cdump (from lm_sensors) in linux |
| 19:01.18 | marbalon | dcordes: ok, I will put sources on my server |
| 19:01.29 | dcordes | ok |
| 19:01.42 | dcordes | marbalon: is it autoconf ? |
| 19:02.06 | cr2_ | BabelO: i'll install qgis for windows now, so the qt4 runtime and msvc*junk should be already there. |
| 19:02.29 | marbalon | dcordes: no makefile based, simple to cross_compiling |
| 19:02.46 | marbalon | dcordes: http://baliniak.pl/android/i2c-tools-3.0.1.tar.bz2 |
| 19:03.18 | infernixx | dcordes: how do I add packages to an image such as console-image? |
| 19:04.08 | cr2_ | marbalon: do you include i2cdump there ? |
| 19:05.01 | dcordes | infernixx: ${DISTRO}_EXTRA_INSTALL += "mplayer nano" |
| 19:05.03 | marbalon | cr2_: no, I don't have cross_compile, OE in progress |
| 19:05.04 | dcordes | in local.conf |
| 19:05.30 | dcordes | I can sure make a .bb for i2c tools |
| 19:05.46 | dcordes | a proper src URI would be good from orig project site |
| 19:07.31 | marbalon | dcordes: http://dl.lm-sensors.org/i2c-tools/releases/i2c-tools-3.0.1.tar.bz2 |
| 19:07.59 | dcordes | ok |
| 19:08.43 | dcordes | marbalon: do you need all programs? |
| 19:10.02 | marbalon | dcordes: will be great, but i2c* enough |
| 19:11.58 | dcordes | I will add this to OE later |
| 19:12.04 | dcordes | have to go now |
| 19:12.27 | dcordes | infernixx: can you pack i2tools for marbalon into one of the working console-images? |
| 19:12.31 | dcordes | or minimal |
| 19:12.55 | BabelO | cr2_: full libraries, tell me once you download http://linuxbox2.free.fr/qlandkartegt.zip |
| 19:13.16 | dcordes | later |
| 19:15.02 | *** join/#htc-linux AlGe (n=alge@chello080109231226.4.uni-klu.teleweb.at) |
| 19:17.53 | cr2_ | BabelO: done |
| 19:20.04 | cr2_ | BabelO: how big is your omap-hh patch ? |
| 19:20.52 | BabelO | cr2_: around 6.7Mb |
| 19:21.07 | BabelO | cr2_: i take a muru patch as a base to be up to date |
| 19:23.39 | Marex | cr2_, sent, please commit :) |
| 19:24.15 | cr2_ | BabelO: we need to do something for a 2.6.25 update |
| 19:24.29 | cr2_ | BabelO: the main roadblock is the asic3_mmc driver ;) |
| 19:24.55 | miknix | cr2_, the i2c address space is FFFB:3800 -> FFFB:3FFF ? I'll dump it |
| 19:25.57 | cr2_ | Marex: btw, is there some more sane way to do this -> PGSR1 = 1<<21;/* GPIO53 - nPCE2_MD */ |
| 19:26.09 | BabelO | miknix: yes it is, but you need to change the register shift i think, i already do it on artemis |
| 19:26.20 | cr2_ | miknix: addlist mmutrace p2v(0xfffb3800) ... |
| 19:26.33 | miknix | BabelO, how much is the register shift? |
| 19:26.45 | miknix | 0x2? |
| 19:27.32 | *** join/#htc-linux patoche (n=root@lns-bzn-28-82-250-174-241.adsl.proxad.net) |
| 19:28.29 | Marex | cr2_, nope, I checked other platforms |
| 19:28.31 | cr2_ | Marex: and we'd write some more generic driver for saving such 4 addresses, so everyone will benefit. |
| 19:28.37 | Marex | s/platfoms/devices/ |
| 19:28.44 | cr2_ | Marex: GPIO_bit something ? |
| 19:29.14 | cr2_ | include/asm-arm/arch-pxa/* |
| 19:29.22 | Marex | this is faster, GPIO_bit has to do modulo ;-) |
| 19:29.50 | Marex | btw those four adds .. well that can be simple memcpy ? |
| 19:29.51 | cr2_ | Marex: 1ns loses over maintenance pain here. |
| 19:30.18 | cr2_ | Marex: sure, and with the base address in some platform_data struct. |
| 19:30.18 | BabelO | miknix: yes |
| 19:31.20 | Marex | cr2_, I'd be glad if you can commit it like this ... I spent today by disassembling the ipl so Im pretty tired from it |
| 19:31.22 | cr2_ | Marex: but there is always a problem of the possible deadlock/overwrite here |
| 19:31.36 | cr2_ | Marex: yes, i will. |
| 19:31.40 | Marex | thanks |
| 19:31.44 | Marex | then I can continue with palmld |
| 19:31.57 | Marex | which still refuses to boot ... dammit |
| 19:32.00 | cr2_ | Marex: but think about other devices in the future. |
| 19:32.11 | Marex | cr2_, ok |
| 19:32.15 | marbalon | dcordes: any url to local.conf for Kaiser ? |
| 19:32.18 | cr2_ | Marex: because this code is cloned 5 times already. |
| 19:32.30 | Marex | if only five times ;) |
| 19:32.36 | cr2_ | ;) |
| 19:35.03 | cr2_ | BabelO: LD_LIBRARY_PATH in xp ? |
| 19:36.05 | BabelO | cr2_: lol, it is a dream |
| 19:36.15 | marbalon | Raven_coda: are you around ? |
| 19:36.17 | BabelO | cr2_: only PATH variable |
| 19:36.37 | BabelO | cr2_: or all in same directory |
| 19:36.47 | cr2_ | BabelO: it's ugly |
| 19:36.53 | cr2_ | PATH ? |
| 19:36.57 | miknix | cr2_, BabelO when I press the directional keypad I have a lot of these. I cant interpret the addresses but they must have something to do with the I2C |
| 19:37.01 | miknix | 000.000 0b448f84: e1d430b4(ldrh) # b80b3804==00000000 |
| 19:37.24 | BabelO | miknix: yes that is i2c |
| 19:37.42 | cr2_ | 0xfffb3804 OMAP_I2C_STAT_REG |
| 19:37.53 | miknix | oh |
| 19:37.59 | BabelO | miknix: like cr2 say you have a cpld chipset on i2c bus, and this chipset seem to manage keyboard too |
| 19:38.08 | miknix | b80b3804 is the virtual address then? |
| 19:38.16 | cr2_ | miknix: you can mask it. really interesting is the data register |
| 19:38.21 | cr2_ | yes. |
| 19:38.24 | miknix | ok |
| 19:38.46 | cr2_ | 0xfffb380e OMAP_I2C_DATA_REG |
| 19:38.55 | BabelO | cr2_: yes PATH -> Windows key + pause key -> environment variable |
| 19:39.39 | cr2_ | p2v(0xfffb380e) will be most probably 0xb80b380e. but there is also 1:1 mapping afair. but the wince drivers use 0xb80* for 0xfff |
| 19:39.53 | cr2_ | 0xb81* is the CPLD |
| 19:40.23 | cr2_ | miknix: http://wiki.xda-developers.com/index.php?pagename=ArtemisMemoryMap |
| 19:40.46 | cr2_ | hm. CPLD on artemis. |
| 19:40.54 | cr2_ | on wiza it's more difficult. |
| 19:41.05 | cr2_ | but the cpld() api seems to be teh same |
| 19:41.15 | cr2_ | cpld(bank,bitmask,value) |
| 19:41.49 | miknix | cr2_, the directional keypad has their own gpios. why the i2c is needed? |
| 19:42.04 | infernix | marbalon: i have build info for kaiser |
| 19:42.21 | cr2_ | miknix: maybe it uses the cpld gpios ? |
| 19:43.02 | cr2_ | miknix: having buttons on asic3 gpios was a usual thing for htc. |
| 19:43.38 | marbalon | infernix: can you help me with building own initrd image ? |
| 19:43.47 | infernix | yeah im makig a pastebin |
| 19:43.52 | infernix | did you set up OE build env yet? |
| 19:43.53 | miknix | hum... going to have dinner. bbiam |
| 19:44.35 | cr2_ | BabelO: i have zero windows usage capabilities :) what does it mean PATH -> Windows key + pause key -> environment variable ? |
| 19:45.12 | BabelO | cr2_: a shorcut to add directly PATH environment variable |
| 19:45.26 | infernix | marbalon: http://pastebin.ca/998660 |
| 19:45.31 | infernix | let me know when you get stuck |
| 19:45.38 | BabelO | cr2_: press Windows key + pause key and then look for environment variable button |
| 19:46.29 | cr2_ | hehe. |
| 19:46.37 | cr2_ | windows+Fn+pause here. |
| 19:47.43 | cr2_ | BabelO: what should i add there. |
| 19:48.04 | BabelO | normally you should see two list of variable |
| 19:48.12 | BabelO | cr2_: one for user, and ne for system |
| 19:48.14 | cr2_ | anybody who says windows is easy to use should be burnt alive ;) |
| 19:48.35 | Pryan | cr2_ hahaha |
| 19:49.07 | BabelO | cr2_: open the PATH line and add your directory library to this |
| 19:49.33 | cr2_ | sure it's easy when everything the precomfigured and precompiled for you by somebody. the same is in linux ;) |
| 19:50.28 | cr2_ | BabelO: i have c:\Program Files\FWtools2.1.0 here |
| 19:50.47 | BabelO | cr2_: but not bin directory ? |
| 19:51.01 | cr2_ | BabelO: ok. c:\Program Files\FWtools2.1.0\bin |
| 19:51.13 | BabelO | ok so it looks good |
| 19:51.26 | cr2_ | WTF .dll has with bin. omg. windows is a real PITA :) |
| 19:54.15 | BabelO | cr2_: does qlandkarte start ? |
| 19:54.28 | cr2_ | searching for ; |
| 19:54.43 | cr2_ | i have english xp on a german notebook |
| 19:54.54 | BabelO | lol |
| 19:55.06 | BabelO | cr2_: ALT+SHIFT switch language keyboard on windows |
| 19:55.53 | cr2_ | LOL |
| 19:56.13 | BabelO | cr2_: i know some shotcut :) |
| 19:56.22 | cr2_ | how can people be productive with such shitty operating environment ?! |
| 19:57.25 | BabelO | cr2_: you have it in a virtual machine ? or you have a real windows |
| 19:57.40 | *** join/#htc-linux patoche (n=root@lns-bzn-28-82-250-174-241.adsl.proxad.net) |
| 19:57.50 | cr2_ | real windows |
| 19:58.11 | cr2_ | i guess even genuine(tm) ;) |
| 19:58.31 | cr2_ | added |
| 19:59.02 | cr2_ | wow |
| 19:59.04 | cr2_ | started. |
| 19:59.42 | cr2_ | :) i guess ozi explorer will be a dead horse RSN. |
| 20:00.35 | BabelO | cr2_: good so you start it, i need to notice kiozen about the rint |
| 20:00.38 | cr2_ | i'm wondering why qt still has these combobox entry height glitches |
| 20:01.06 | BabelO | cr2_: you can switch qt theme, but i give you minimum dll ;) |
| 20:01.39 | cr2_ | hmm. no wheel on the notebook. |
| 20:02.00 | cr2_ | how do i resize the image then... |
| 20:03.33 | cr2_ | and the |
| 20:03.40 | cr2_ | center map is shadow. |
| 20:03.48 | cr2_ | something for kiozen to think about. |
| 20:05.22 | BabelO | cr2_: how can i check why i did not enter in IRQ handler after boot |
| 20:05.41 | cr2_ | did you get the irq ? |
| 20:05.48 | cr2_ | cat /proc/interrupts |
| 20:06.09 | cr2_ | btw, can you pastebin the /proc/iomem with htc-egpio loaded ? |
| 20:06.47 | BabelO | cr2_: http://pastebin.ca/998676 |
| 20:06.54 | BabelO | cr2_: i restart for egpio |
| 20:06.55 | cr2_ | BabelO: i've connected the mouse from the linux notebook, but it's a bad solution. |
| 20:07.19 | BabelO | lol |
| 20:07.23 | BabelO | yes bad solution |
| 20:11.01 | cr2_ | BabelO: do you know how to put the files to sf.net download area ? |
| 20:11.50 | cr2_ | uh. windows is slow on warping the 25000x25000 .png |
| 20:12.12 | BabelO | cr2_: no |
| 20:12.29 | BabelO | cr2_: wait i send you a windows tools |
| 20:12.41 | cr2_ | ? |
| 20:14.25 | cr2_ | windows is still not dead |
| 20:14.52 | cr2_ | hm. top does not show the windows processes |
| 20:19.52 | BabelO | cr2_: i send you a tools to monitor better than the task manager |
| 20:23.39 | BabelO | cr2_: i did not see iomem entry for egpio, but it is loaded |
| 20:24.38 | miknix | cr2_, use the SF.net file manager to put files on download area |
| 20:24.59 | BabelO | cr2_: oh sorry i see it |
| 20:25.00 | miknix | cr2_, on the red admin menu |
| 20:25.25 | BabelO | cr2_: http://pastebin.ca/998684 |
| 20:29.55 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 20:30.58 | BabelO | cr2_: maybe 236 is the wrong IRQ.. humm |
| 20:33.59 | *** join/#htc-linux kiozen (n=kiozen@rgnb-4db1dd98.pool.einsundeins.de) |
| 20:35.44 | *** join/#htc-linux dcordes_ (n=lukas@f054208083.adsl.alicedsl.de) |
| 20:38.30 | kiozen | cr2_: looks like BabelO helped out |
| 20:38.41 | BabelO | kiozen: rint need to be floor :) |
| 20:38.42 | kiozen | else I would have a binary dist |
| 20:38.54 | Marex | cr2_, n560 seems very simple |
| 20:39.01 | Marex | cr2_, and arm only code |
| 20:39.21 | kiozen | BabelO: no, it should be real rounding like (int ) (x + 0,5) |
| 20:39.46 | BabelO | kiozen: ah :( so i do the wrong change |
| 20:39.56 | kiozen | but rint is definetly no good idea :) |
| 20:40.08 | kiozen | old code of mine |
| 20:40.44 | kiozen | but reading the logs it seems to work, cr2_? |
| 20:40.57 | Marex | cr2_, try destination address in _pm.c 0xa0100000 |
| 20:41.20 | *** join/#htc-linux patoche (n=root@lns-bzn-56-82-255-206-113.adsl.proxad.net) |
| 20:41.59 | *** join/#htc-linux nx5_away (n=pocholo@84.78.40.245) |
| 20:42.13 | kiozen | BabelO: how do you compile, with VC 8.0 |
| 20:42.46 | BabelO | kiozen: i just use ccmake to vc 2005 then i open sln in vc |
| 20:43.00 | kiozen | so you use commercial qt? |
| 20:43.08 | BabelO | kiozen: no |
| 20:43.24 | kiozen | how do you get qt os to work? |
| 20:43.28 | BabelO | kiozen: i ve use a qt patch for visual studio express |
| 20:43.50 | kiozen | ok, I tried mingw and os qt |
| 20:43.58 | BabelO | only difference between express on pro is some library added to express by addon are already in pro |
| 20:44.11 | BabelO | kiozen: with mingw i compile it too |
| 20:44.20 | *** join/#htc-linux nx5_0ff (n=pocholo@84.78.40.245) |
| 20:44.25 | kiozen | no problems with gdal? |
| 20:44.38 | BabelO | kiozen: no don't remember |
| 20:45.00 | BabelO | but since i ionstall msys, my mingw is broken |
| 20:45.03 | kiozen | did you use FWTools or did you compile gdal by your own |
| 20:45.43 | BabelO | kiozen: fwtools like you told me |
| 20:46.02 | cr2_ | wow. very nice. |
| 20:46.11 | kiozen | hm, there must be something fishy with my setup |
| 20:46.38 | kiozen | cr2_: yes loads of work done the last days :) |
| 20:46.51 | kiozen | my dad is a real bad test case |
| 20:46.56 | cr2_ | kiozen: i have a small usability problem |
| 20:46.58 | cr2_ | i see |
| 20:47.01 | kiozen | ok |
| 20:47.03 | kiozen | ? |
| 20:47.17 | cr2_ | on a notebook without the mouse |
| 20:47.23 | kiozen | +- |
| 20:47.31 | cr2_ | wheel |
| 20:47.31 | kiozen | :) |
| 20:47.38 | cr2_ | but "centering" is shadowed |
| 20:47.49 | kiozen | ? |
| 20:48.00 | cr2_ | hm. maybe a button below "open File" ? |
| 20:48.09 | Marex | cr2_, ping |
| 20:48.14 | Marex | cr2_, try destination address in _pm.c 0xa0100000 |
| 20:48.24 | cr2_ | marbalon: why ? |
| 20:48.24 | Marex | instead of 0xa0201000 |
| 20:48.34 | cr2_ | Marex: why ? |
| 20:48.35 | Marex | Trace PC [arm]: pc 0xa01003d0, insn 0x00000000 |
| 20:48.38 | Marex | because of this |
| 20:48.52 | cr2_ | Marex: it's inside the SPL |
| 20:49.02 | Marex | it jumps there independently of RCSR or PSPR |
| 20:49.03 | cr2_ | and SPL is loaded from flash |
| 20:49.16 | cr2_ | yes |
| 20:49.28 | Marex | cr2_, so just try it ... please ;) |
| 20:49.36 | cr2_ | so 0xa0100000 will be overwritten |
| 20:49.42 | Marex | SPL should be reloaded only after cold boot |
| 20:49.46 | Marex | not after suspend to mem |
| 20:49.55 | cr2_ | hm. maybe. |
| 20:50.03 | Marex | do you see any memory writes in the bootloader |
| 20:50.06 | cr2_ | at least i hope so. |
| 20:50.16 | Marex | then try it ;) |
| 20:50.24 | cr2_ | because the jump to the "loader" code is unconditional |
| 20:51.05 | Marex | which jump ? |
| 20:51.06 | cr2_ | Marex: hm. this part does not even need to be preserved |
| 20:51.13 | cr2_ | jump from IPL |
| 20:51.31 | Marex | you mean LDR pc, [pc, #428] ? |
| 20:51.37 | cr2_ | Marex: so it seems i need to check the loader code. |
| 20:51.48 | Marex | rather check your email |
| 20:51.53 | cr2_ | ok. |
| 20:51.56 | Marex | I sent you the codeflow to jump to certain address |
| 20:52.08 | cr2_ | kiozen: +- does not work ? |
| 20:52.23 | cr2_ | Marex: need to reconnect the mouse first :) |
| 20:52.49 | cr2_ | kiozen: how do we integrate GT with fwtools ? |
| 20:52.56 | kiozen | ? it should zoom in and out? |
| 20:53.01 | cr2_ | changing the PATH is too linux-like :) |
| 20:53.04 | kiozen | good question |
| 20:53.14 | kiozen | I use a *.bat |
| 20:53.50 | Marex | cr2_, sure, let me know then |
| 20:54.04 | kiozen | cr2_: http://pastebin.ca/998716 |
| 20:54.21 | kiozen | cr2_: btw you can use alt + up/down/left/right to move the map |
| 20:54.28 | Marex | cr2_, well Im going to read the disassembly of palmld loader again :( |
| 20:54.34 | cr2_ | kiozen: -+ does not work for me. |
| 20:54.39 | Marex | it doesnt boot :( |
| 20:55.02 | kiozen | maybe the map canvas needs the focus, it works for me right after app start |
| 20:55.18 | kiozen | at least in linux :) |
| 20:55.19 | cr2_ | kiozen: alt+arrows does not work too |
| 20:55.26 | kiozen | win32? |
| 20:55.30 | cr2_ | the mouse pointer is in the canvas |
| 20:55.34 | cr2_ | yes. xp |
| 20:55.49 | kiozen | hm, have to change os to check.. |
| 20:55.52 | kiozen | bbl |
| 20:56.09 | cr2_ | kiozen: and it's slow on low zoom (no overviews) |
| 20:56.37 | BabelO | cr2_: do you have any idea for my irq issue ? |
| 20:56.53 | cr2_ | BabelO: need to connect the mouse first :) |
| 20:57.32 | cr2_ | i think the fwtools path should go into 'config' menu |
| 20:57.55 | cr2_ | with c:\program files\fwtools* being checked as default |
| 20:59.14 | cr2_ | and the orange gcp color needs a config entry. |
| 20:59.58 | *** join/#htc-linux kiozen (n=kiozen@rgnb-4db1dd98.pool.einsundeins.de) |
| 21:00.07 | cr2_ | kiozen: .bat is also a linux way :) |
| 21:00.15 | kiozen | cr2_: works like a charm, here |
| 21:00.26 | cr2_ | kiozen: <cr2_> i think the fwtools path should go into 'config' men |
| 21:00.35 | cr2_ | <cr2_> with c:\program files\fwtools* being checked as default |
| 21:00.50 | kiozen | cr2_: it's not that easy |
| 21:01.21 | kiozen | there has to be a system path to fwtools to find all the iddy griddy gdal needs |
| 21:01.24 | cr2_ | hmm. then create an .lnk |
| 21:01.52 | cr2_ | to start qlandkarte |
| 21:01.56 | kiozen | gdal is unix, thus it's not nice to win32 |
| 21:02.10 | cr2_ | gdal is too much win32 imho :) |
| 21:02.32 | cr2_ | all the braindamage there comes from win32 compatibility ;) |
| 21:03.01 | kiozen | cr2_: that does most of the magic: call "%FWTOOLS_DIR%\bin\setfwenv.bat" |
| 21:03.25 | kiozen | thus it's not a simple path problem |
| 21:03.30 | cr2_ | kiozen: qlandkarteGT.bat instead of .exe ? |
| 21:03.53 | kiozen | that's what I am doing right now |
| 21:03.58 | cr2_ | ok. |
| 21:04.15 | cr2_ | hmm. still need to do something with +- |
| 21:04.21 | kiozen | if I would know how to write a windows installer it would be easy |
| 21:04.34 | cr2_ | .msi ? |
| 21:04.37 | kiozen | +- is working for m in XP |
| 21:04.41 | cr2_ | i think there was something from nullsoft |
| 21:04.48 | kiozen | .msi woud be great :) |
| 21:04.52 | cr2_ | kiozen: xp here too |
| 21:05.08 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 21:05.16 | *** join/#htc-linux marmotta (n=skodde@unaffiliated/skodde) |
| 21:05.20 | kiozen | I tried it alt + up ... and +- works |
| 21:05.20 | BabelO | cr2_: yes there is a nullsoft tollkit to make installer |
| 21:05.21 | cr2_ | http://nsis.sourceforge.net/Main_Page |
| 21:05.25 | BabelO | cr2_: it is perfect |
| 21:05.51 | kiozen | let's wait for someone to release win32 binaries :))))) |
| 21:06.23 | cr2_ | kiozen: add the 'load gcp' from .map first :) |
| 21:06.28 | kiozen | things maybe BabelO wants to do... |
| 21:06.41 | cr2_ | BabelO: can you create an installer ? |
| 21:06.48 | BabelO | kiozen: already use nullsoft for my work ;) |
| 21:07.11 | kiozen | BabelO: thus you are one big step ahead of me |
| 21:07.36 | cr2_ | kiozen: are there any other keys ? |
| 21:07.38 | BabelO | cr2_: yes i can, but better on monday at work |
| 21:08.18 | kiozen | cr2_: no hidden ones, the other ones are standard or displayed in the menus |
| 21:08.18 | cr2_ | kiozen: i'm dumb. these - - - - on the TP work as a wheel :) |
| 21:08.55 | cr2_ | kiozen: but being able to center the image should be nice too. |
| 21:09.08 | kiozen | f3 does not work for you? |
| 21:09.20 | cr2_ | too much zooming to see the image is bad, because it's very slow |
| 21:09.29 | cr2_ | no, it's shadowed. |
| 21:09.40 | kiozen | ???? |
| 21:09.42 | cr2_ | and does not work too |
| 21:10.03 | kiozen | it's only shadowed in map editing mode |
| 21:10.25 | cr2_ | no, it's shadowed in the calibration dialog for me |
| 21:10.40 | kiozen | yes that is ok |
| 21:11.00 | cr2_ | btw, i'm working with the 32000x32000 png/tiff on a 512MB notebook. it's slow but it works |
| 21:11.29 | kiozen | you should tile it first :) |
| 21:12.00 | cr2_ | yes, it's tiled. |
| 21:12.06 | cr2_ | but without the overviews. |
| 21:12.42 | kiozen | but why do you need center while referencing it? |
| 21:13.01 | cr2_ | to see where to put the gcps |
| 21:13.12 | cr2_ | before referencing it. |
| 21:13.39 | cr2_ | is it centered on load ? i think not |
| 21:13.51 | kiozen | no it's top left |
| 21:14.05 | cr2_ | i thin centering is better |
| 21:14.29 | cr2_ | the probability of a white spot in the middle is much lower than in the corner |
| 21:15.05 | kiozen | hm, not from my experience with the dolomity map |
| 21:15.06 | Marex | oh my goddess :S |
| 21:15.14 | Marex | there seems to be two different versions of palmld |
| 21:15.38 | cr2_ | kiozen: not all maps are military GK maps :) |
| 21:15.55 | Marex | or maybe three ... one is prototype with 5GB harddrive, other is "palmld v1" and the one I have is "palmld v2" |
| 21:16.10 | Marex | well maybe palmld v1 is the proto, who knows, but the loader is different |
| 21:16.15 | cr2_ | Marex: why is it a surprise ? |
| 21:16.43 | Marex | cr2_, because the differences are quite big and because Id expect the manufacturer to by lazy |
| 21:16.43 | kiozen | cr2_: it's more question of scanned maps in a sane way |
| 21:16.51 | Marex | and in case of palm ... Uber-lazy |
| 21:16.59 | kiozen | lo |
| 21:17.01 | kiozen | lol |
| 21:17.32 | cr2_ | Marex: btw, you should use the disassemble .py script by pH5, not the raw objdump |
| 21:17.44 | Marex | hm ... why ? |
| 21:17.46 | kiozen | yes between z21 and z22 the is hardly any change from the user's point of view |
| 21:18.10 | Marex | z21 and z22 are both grayscale, right ? |
| 21:18.11 | cr2_ | kiozen: i have a map which is rotated about 45 degress to NS line |
| 21:18.18 | kiozen | z22 is color |
| 21:18.20 | Marex | I had just original zire, it was pretty much fun |
| 21:18.23 | Marex | ah ... I see |
| 21:18.26 | cr2_ | so i get huge white corners |
| 21:18.39 | kiozen | I got a z21 my wife a z22 ;) |
| 21:18.49 | Marex | hehe :) |
| 21:18.57 | cr2_ | LOL |
| 21:19.06 | Marex | it might be good idea to get a wife |
| 21:19.12 | kiozen | LOL |
| 21:19.31 | kiozen | she loves to beam me family event :) |
| 21:19.45 | kiozen | not too much fun ;) |
| 21:19.47 | Marex | hmm ... ok, Im adding that to ToDo list ;) |
| 21:20.23 | cr2_ | kiozen: GT is really great :) |
| 21:20.33 | kiozen | cr2_: ok, I think I will change to center the image |
| 21:20.35 | *** join/#htc-linux CVirus (n=GoD@196.205.193.110) |
| 21:21.00 | kiozen | ok if it is great I do not have to center it :) |
| 21:21.25 | cr2_ | well, some minor enhancements are nice to have. |
| 21:21.29 | cr2_ | :) |
| 21:21.33 | kiozen | :D |
| 21:21.38 | kiozen | ok |
| 21:22.16 | cr2_ | it should be easy to add the gcps from .map |
| 21:22.32 | cr2_ | if they are latlong. wgs84. |
| 21:22.44 | kiozen | cr2_: the keys don't work for referencing mode? |
| 21:22.49 | cr2_ | yes |
| 21:23.04 | kiozen | ok, now I can reproduce the problem |
| 21:23.23 | kiozen | yes if they are longlat wgs84 it's easy |
| 21:23.31 | Marex | damn, why does only palmld has to use THUMB in it's bootloader :E~ |
| 21:23.46 | cr2_ | unless you have a grid, it's mostly always the case. |
| 21:23.50 | kiozen | but else the projection datum strings of map are voodoo for me |
| 21:24.22 | cr2_ | kiozen: datum is easy. the projection params is more difficult |
| 21:25.00 | cr2_ | kiozen: i have made 2 screenshots of ozi datum list . running in wine. |
| 21:25.05 | kiozen | hm , I would prefere to keep ozi out of qlandkarte |
| 21:25.44 | cr2_ | the first column is mapinfo datum number |
| 21:25.56 | cr2_ | for 80% of datums. |
| 21:26.25 | cr2_ | ok. |
| 21:26.43 | cr2_ | it seems i need to finish the datum/proj support there :) |
| 21:27.50 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 21:27.55 | kiozen | hm, looks like the widgets from the referencing dialog digest all key events |
| 21:28.10 | kiozen | that's ba |
| 21:28.17 | kiozen | s/ba/bad/ |
| 21:28.48 | kiozen | don't know if I can fix that |
| 21:32.49 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 21:36.39 | kiozen | good night |
| 21:37.27 | *** join/#htc-linux Banji (n=ontv@87-196-207-38.net.novis.pt) |
| 21:37.36 | Banji | hi everybody |
| 21:37.57 | Banji | i need help, i spek more a less english |
| 21:38.19 | Banji | i install in qtek9090 the linux in sd card |
| 21:39.13 | Banji | i put the sd card in my pocket pc they load linux but they stop and appear in the screen "familiar login:" |
| 21:39.20 | Banji | where is this? |
| 21:39.45 | Banji | please help me |
| 21:40.01 | *** join/#htc-linux infernix (n=nix@unaffiliated/infernix) |
| 21:40.06 | infernix | re |
| 21:40.08 | cr2_ | 9090 is blueangel ? |
| 21:40.17 | Banji | yes |
| 21:40.39 | Banji | there is compatible |
| 21:40.40 | cr2_ | you must use some very old "linux" |
| 21:40.59 | cr2_ | since you have 'familiar login:' |
| 21:41.27 | Banji | yes i have this |
| 21:41.42 | Banji | do you know the login |
| 21:41.43 | Banji | ? |
| 21:41.55 | Marex | Banji, grab some newer image with angstrom |
| 21:42.03 | Marex | btw probably root ?> |
| 21:42.56 | Banji | the version is Angstrom-opie-image-test-20070407-htcuniversal-rootfs.tar.bz2 |
| 21:43.06 | Banji | and the password? |
| 21:43.32 | Marex | gosh ... 3 versions of T755p :/ |
| 21:43.37 | Marex | palm went crazy |
| 21:43.59 | Banji | no there is the version opie |
| 21:44.05 | Banji | no more |
| 21:44.41 | Banji | my problem is, i don´t know the "familiar login:" and the password |
| 21:44.59 | Banji | my palm is load the kernel |
| 21:45.03 | Banji | load everything |
| 21:46.50 | Banji | i download the kernel for this page http://www.handhelds.org/ |
| 21:46.58 | Banji | please help-me |
| 21:51.37 | Marex | Banji, that note about palm wasnt directed to you ... well try null password ;) |
| 21:51.44 | Marex | or "root" or "toor" |
| 21:52.37 | *** join/#htc-linux exco (n=excogita@e181126132.adsl.alicedsl.de) |
| 21:52.48 | Banji | [Marex]: login incorrect |
| 21:52.48 | Banji | :s |
| 21:52.59 | cr2_ | rootme |
| 21:53.14 | Banji | in the username or in password |
| 21:53.16 | Banji | ??? |
| 21:53.19 | cr2_ | but familiar is a completely outdated stuff |
| 21:53.24 | cr2_ | root/ rootme |
| 21:53.35 | cr2_ | login/password |
| 21:55.20 | Banji | i put user:root pass_rootme and apear this "login[1387]: root login on ´vc/0' -sh:can´t acess try;job control turned off" |
| 21:55.27 | Banji | and now ??? |
| 21:56.41 | cr2_ | Banji: i've told you it's completely outdated |
| 21:57.08 | *** join/#htc-linux Banji (n=ontv@87-196-207-38.net.novis.pt) |
| 21:58.21 | Banji | i don´t understand? |
| 21:58.47 | Banji | how i define the setup? |
| 21:58.52 | cr2_ | Banji: you should use a more modern linux image |
| 21:59.24 | cr2_ | http://linuxtogo.org/~htcpxa/htcblueangel/ |
| 21:59.26 | Banji | where i can download thi more modern linux image |
| 21:59.29 | BabelO | cr2_: it seem my irqs are never called when i press the touchscreen :( |
| 21:59.45 | BabelO | Banji: use the one under Qtopia |
| 21:59.53 | cr2_ | BabelO: you have a ts irq ? |
| 21:59.54 | *** join/#htc-linux maleki (n=Miranda@80.191.134.46) |
| 22:00.02 | Banji | and this image are compatible with my qtek9090 |
| 22:00.02 | Banji | ??? |
| 22:00.09 | BabelO | cr2_: according to haret it s 76 |
| 22:00.14 | cr2_ | BabelO: and it can be traced in wince ? |
| 22:00.22 | BabelO | cr2_: yes i see it in wince |
| 22:00.35 | BabelO | Banji: qtek9090 is htc blueangel |
| 22:00.44 | cr2_ | BabelO: ok, then it should call the irq handler in linux. |
| 22:00.54 | BabelO | Bajust copy the .exe and .bz2 file on top of your sdcard ad start exe file |
| 22:00.54 | infernix | cr2_: the kaiser has a ARM926EJ-S coprocessor. from what I gathered, on the nokia tablet this coproc has VFP support and this works; i've tried to enable it on the kaiser though, but it seems it cannot access the coprocessor and hence has no VFP. is this by design, or just due to lack of code to address the VFP? |
| 22:01.15 | *** join/#htc-linux CyberScript32_ (n=ontv@87-196-207-38.net.novis.pt) |
| 22:01.36 | maleki | Hi every body... |
| 22:01.37 | cr2_ | BabelO: it's only a question of the proper GPIO / IO setup |
| 22:01.42 | infernix | and how does that work on halibut? i didn't see VFP enabled in any android kernels |
| 22:01.55 | cr2_ | infernix: don't you have more urgent issues on kaiser ? :) |
| 22:01.59 | BabelO | cr2_: that is why it is strange i use IRG_GPIO(76) |
| 22:02.08 | infernix | i do :) but i am just wondering |
| 22:02.58 | infernix | since i spent like 6 hours bitbaking openembedded with VFP as compilation flags only to find out that that's not a smart thing to do on kaiser :) |
| 22:03.03 | cr2_ | infernix: i have no idea. usually linux-arm uses only pure armv4 or armv5 targets. |
| 22:03.24 | cr2_ | it's also good for binary compatibility |
| 22:04.05 | infernix | granted. but vfp has its uses. i was under the impression however that the coproc runs the phone software and that its not accessible at all |
| 22:04.15 | cr2_ | BabelO: the irq should show up in /proc/interrupts if it's registered properly |
| 22:04.32 | BabelO | cr2_: irq handler is called when my spi driver access tsc2046 register, but when i press touchscreen it don't call it |
| 22:04.58 | BabelO | cr2_: you have it http://pastebin.ca/998684 |
| 22:05.02 | cr2_ | BabelO: the gpio irq is a core CPU business |
| 22:05.46 | BabelO | cr2_: sorry this one http://pastebin.ca/998676 |
| 22:06.23 | cr2_ | BabelO: why there is no CPLD in iomem ? |
| 22:06.46 | cr2_ | 236: 4 GPIO tsc2046-ts |
| 22:06.55 | cr2_ | raised 4 times |
| 22:07.17 | cr2_ | and printk does not show anything ? |
| 22:07.27 | cr2_ | inside the irq handler |
| 22:07.57 | cr2_ | BabelO: EGPIO phys=04000400 virt=c4000400 is not enough |
| 22:08.14 | cr2_ | BabelO: there should be a CPLD memory area in iomem |
| 22:08.25 | cr2_ | otherwise you'll oops |
| 22:08.44 | BabelO | cr2_: ah ? ;) i use same as n560 |
| 22:08.56 | cr2_ | BabelO: then something is wrong. |
| 22:09.01 | BabelO | cr2_: in the first pastebin it is 04000400-04000410 : htc-egpio |
| 22:09.01 | cr2_ | i'll boot n560 now |
| 22:09.21 | cr2_ | ah. ok. |
| 22:09.30 | cr2_ | then CPLD should work ;) |
| 22:09.44 | cr2_ | it's mapped , so you can write there. |
| 22:09.45 | BabelO | cr2_: since i use meme=60M like you told me, artemis is more stable |
| 22:09.56 | cr2_ | it should be ;) |
| 22:10.25 | cr2_ | i guess your problem are the missing LCD type detection, and the LCD CPLD gpio support. |
| 22:10.41 | cr2_ | can you add the LCD type detection to the LCD probe ? |
| 22:10.53 | cr2_ | miknix: are you already sleeping ? |
| 22:11.04 | BabelO | cr2_: not a problem, because when i start with egpio enabled, screen is not bright, according to you it miss egpio settings |
| 22:11.12 | cr2_ | Marex: i've applied your patch |
| 22:11.17 | BabelO | cr2_: but if i set gpio settings, i m not able to boot |
| 22:11.20 | Marex | cr2_, thank you |
| 22:11.23 | cr2_ | Marex: do you have the .py script of pH5 ? |
| 22:11.34 | Marex | nope ;) |
| 22:11.39 | Marex | Im fine with objdump |
| 22:11.40 | cr2_ | i'll send it to you |
| 22:11.46 | BabelO | cr2_: ok i add the LCD detection, gpio 44 and 55 |
| 22:11.55 | miknix | cr2_, no, still up. I'm integrating the tsc2046 driver |
| 22:11.59 | Marex | cr2_, thanks |
| 22:12.02 | cr2_ | manual pointer dereferencing is PITA |
| 22:12.15 | Marex | cr2_, btw have you tried the new address on n560 ? |
| 22:12.24 | cr2_ | miknix: do you see the I2C being sent ? |
| 22:12.34 | cr2_ | s/I2C/I2C data/ |
| 22:12.50 | miknix | cr2_, I stopped by tests, I'll be back to that in a moment |
| 22:12.55 | cr2_ | Marex: not all at once. |
| 22:12.59 | cr2_ | ok |
| 22:13.02 | Marex | ok |
| 22:14.00 | cr2_ | Marex: i have an old ida. it's even a legitimate copy, so my ipl output looks a bit better than yours ;) |
| 22:14.06 | miknix | BabelO, is the tsc2046 driver still maintained? IMHO its bad to stick with a unmaintained driver |
| 22:14.27 | Marex | cr2_, you have old proprietary solution ... ewwww :p |
| 22:14.30 | cr2_ | Marex: btw, you can use the latest ida in the demo mode, and then copy/paste the .asm from it. |
| 22:14.46 | cr2_ | works in wine |
| 22:15.07 | cr2_ | but only for relatively small binaries |
| 22:15.15 | cr2_ | but ipl is small :) |
| 22:15.43 | Marex | cr2_, latest is 5.2, isnt it ? |
| 22:15.44 | cr2_ | Marex: i use the right tool for the job. |
| 22:15.58 | cr2_ | don't know. |
| 22:16.11 | Marex | ok |
| 22:16.17 | BabelO | miknix: not sure, but it contain omap stuff, anyway later we can switch, at the time it is more easier for me to use this one |
| 22:16.26 | Marex | well anyway ... objdump is opensource :) |
| 22:16.30 | cr2_ | the only problem i have with the old one is problem after the thumb switch |
| 22:16.39 | cr2_ | Marex: i'll send you the script. |
| 22:16.44 | Marex | thanks |
| 22:17.14 | miknix | BabelO, ok, booting |
| 22:17.52 | cr2_ | Marex: sent |
| 22:18.12 | Marex | thanks |
| 22:19.02 | miknix | is tired of seeing activesync popping up everytime |
| 22:19.07 | cr2_ | miknix: where is the latest tsc2046_ts.c driver ? if you'll strip the omap_* and #ifdef OMAP then it'll be a good driver that can be tested and used on the pxa phones too. |
| 22:19.19 | *** join/#htc-linux Banji (n=ontv@87-196-207-38.net.novis.pt) |
| 22:19.55 | BabelO | cr2_: ok i found why egpio driver does not works |
| 22:20.13 | BabelO | cr2_: gpio_get_value broken the kenrel boot, i miss something |
| 22:20.37 | cr2_ | BabelO: i think it's the "BUG:" message there |
| 22:21.04 | miknix | cr2_, yeah.. but the tsc2046 is pin compatible with the adsxxx driver. for some reason the omap-linux guys are using the unified driver instead of two separate ones |
| 22:21.08 | cr2_ | if you call these gpios too early. |
| 22:21.34 | cr2_ | BabelO: i had the same problem on n560. it's just the braindead linux kernel design :) |
| 22:21.49 | miknix | cr2_, the tsc2046 headers shoes it was maintained by montavista guys which are the ones that are also working on the omap tree now |
| 22:21.53 | BabelO | cr2_: so how can i solve it ? slave device declaration ? |
| 22:21.57 | BabelO | or module ? |
| 22:21.57 | miknix | s/shoes/shows/ |
| 22:22.03 | cr2_ | miknix: ok |
| 22:22.28 | cr2_ | BabelO: how early do you need to call it ? |
| 22:22.43 | cr2_ | BabelO: i could not use these gpios in machine_init() |
| 22:22.56 | cr2_ | BabelO: it's actually a problem for me on athena. |
| 22:23.16 | cr2_ | BabelO: if i'll do the things in a clean way. |
| 22:23.26 | BabelO | cr2_: in machine_init(), because i have the lcdinit here |
| 22:23.35 | cr2_ | that's bad. |
| 22:23.42 | Marex | cr2_, where does the output of disassemble.py go ? |
| 22:23.51 | BabelO | yes the code structure on omap branch is a bit strange |
| 22:23.52 | cr2_ | Marex: stdout |
| 22:24.11 | Marex | ah ... ok |
| 22:24.17 | cr2_ | BabelO: can you "inherit" the LCD driver ? |
| 22:24.26 | Marex | I need to do objcopy first |
| 22:24.36 | cr2_ | Marex: ? |
| 22:24.46 | BabelO | cr2_: how to do that in kernel ? with the subdevice keyword ? |
| 22:24.50 | Marex | well I cant use that to disassemble raw binary, can I ? |
| 22:24.52 | cr2_ | Marex: it handles raw binary too |
| 22:25.07 | Marex | /opt/arm-2007q3/bin/arm-none-eabi-objdump: n560.bin: File format not recognized |
| 22:25.14 | cr2_ | Marex: i used it for thumb (with a small hack :) |
| 22:25.31 | cr2_ | Marex: and for garmin 76cx |
| 22:26.05 | Marex | hm ... I dont know python much, but it seems it doesnt work ;D |
| 22:26.07 | cr2_ | if ftype == "data": |
| 22:26.07 | cr2_ | <PROTECTED> |
| 22:26.12 | Marex | or I cant get it to |
| 22:26.49 | cr2_ | have you changed the objdump = "/usr/local/wince/cross-tools/bin/arm-wince-pe-objdump" line ? |
| 22:26.57 | Marex | sure |
| 22:27.23 | cr2_ | add print ftype after this line |
| 22:27.25 | cr2_ | ftype = popen("file %s" % dll).readlines()[0].split(' ')[1].replace("\n","") |
| 22:27.36 | cr2_ | or just set ftype to "data" |
| 22:27.43 | cr2_ | and save yourself the hassle |
| 22:28.06 | cr2_ | the script was mainly applied to wince dlls |
| 22:28.32 | Marex | yea, I noticed that |
| 22:28.54 | Marex | well even if I do the objcopy, it dies while finding references |
| 22:29.05 | Marex | doesnt matter, cr2_ please try the address ;) |
| 22:29.09 | cr2_ | BabelO: no, by creating the separated _lcd.c driver |
| 22:29.24 | cr2_ | BabelO: like it's done on the universal |
| 22:29.55 | cr2_ | BabelO: with the pxafb driver |
| 22:29.55 | BabelO | cr2_: ok then i have it, i need to move the gpio init |
| 22:29.55 | cr2_ | BabelO: so you can do it with omapfb |
| 22:30.34 | cr2_ | BabelO: you can't use gpios at this stage, because the egpio driver is not loaded. |
| 22:31.01 | cr2_ | i've tried declaring it with arch_subsys and it still didn't work |
| 22:31.22 | miknix | BabelO, omap1_spi100k: probe of omap1_spi100k.2 failed with error -22 |
| 22:31.52 | cr2_ | Marex: hehe. IndexError: list index out of range |
| 22:32.07 | Marex | yea, I met that |
| 22:32.40 | cr2_ | Marex: hm. wrong machine |
| 22:34.15 | cr2_ | Marex: python disassemble.py ~/XANADUX/N560/n560ipl.bin |
| 22:34.21 | cr2_ | works for me |
| 22:34.45 | BabelO | miknix: ok you have done a bad board declaration, can you pastebin your board file ? |
| 22:35.08 | cr2_ | <PROTECTED> |
| 22:35.08 | cr2_ | <PROTECTED> |
| 22:35.08 | cr2_ | <PROTECTED> |
| 22:35.10 | Marex | cr2_, I have weird objdump then ;) |
| 22:35.20 | cr2_ | Marex: much better than raw objdump ;) |
| 22:35.43 | miknix | BabelO, http://pastebin.com/d4e875316 |
| 22:35.56 | Marex | cr2_, can you do this with my ipl ? |
| 22:36.26 | miknix | BabelO, sorry, wrong branch |
| 22:36.28 | Marex | cr2_, check your email |
| 22:36.48 | cr2_ | Marex: nothing yet. |
| 22:36.59 | miknix | BabelO, there: http://pastebin.com/d5e76f71d |
| 22:37.21 | cr2_ | Marex: yes, it works with your old copy |
| 22:37.55 | cr2_ | <PROTECTED> |
| 22:37.56 | Marex | cr2_, can you send me the output please ? |
| 22:37.57 | BabelO | cr2_: LCD Panel type (3) |
| 22:38.18 | cr2_ | BabelO: toppoly ? |
| 22:38.27 | cr2_ | Marex: yes. |
| 22:38.32 | Marex | thanks |
| 22:38.39 | BabelO | cr2_: i fo omap_gpio(55) <<1 | omap_gpio(44) and it output 3 |
| 22:40.23 | cr2_ | Marex: i think that you are missing that the jump to 0xa01000000 happens after the SPL is loaded there. |
| 22:40.57 | *** join/#htc-linux pikapika (n=pikapika@mar75-8-88-164-227-147.fbx.proxad.net) |
| 22:41.10 | pikapika | hi |
| 22:41.11 | BabelO | miknix: you can remove the .irq from spi struct, it is not used |
| 22:41.18 | BabelO | hi pikapika |
| 22:41.46 | BabelO | cr2_: yes tsc2046_ts need the dav_gpio, it is irq just |
| 22:41.49 | Marex | cr2_, how would the SPL get there ? |
| 22:41.58 | pikapika | hi BabelO |
| 22:42.23 | maleki | join #minix |
| 22:42.32 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 22:42.32 | cr2_ | Marex: sent |
| 22:42.36 | miknix | BabelO, I just booted the branch where I had SPI TXS timeouts but with your "clean changes" applied |
| 22:42.41 | cr2_ | Marex: it will be loaded from MDOC |
| 22:42.57 | Marex | cr2_, I wanted for palmld ;) |
| 22:43.09 | Marex | cr2_, I sent you the ipl just a while ago ;) |
| 22:43.13 | cr2_ | BabelO: but are you supposed to use the number directly ? |
| 22:43.18 | miknix | BabelO, it also fails to probe the spi100k, so the newer changes on the driver are not working on the wizard |
| 22:44.38 | BabelO | miknix: they aer working it is the same, just a setup issue |
| 22:44.43 | cr2_ | miknix: do you kill the secure watchdog too ? |
| 22:44.46 | BabelO | miknix: what is the exact dmesg ? |
| 22:44.49 | miknix | cr2_, yes |
| 22:45.00 | cr2_ | ok. |
| 22:45.41 | miknix | BabelO, http://pastebin.com/d25e87b13 |
| 22:46.43 | cr2_ | Marex: this one is strange. |
| 22:46.56 | Marex | cr2_, thank you :) |
| 22:47.09 | Marex | but I know this even without you ;D |
| 22:47.12 | BabelO | miknix: this is mine http://pastebin.com/m39ad73e0 |
| 22:48.16 | cr2_ | Marex: are you sure it's the ipl ? |
| 22:48.48 | Marex | yup, it's palmld's IPL |
| 22:48.52 | cr2_ | BabelO: Can't enable GPIO wakeup for method 3 ? |
| 22:49.14 | Marex | cr2_, want me to send you disassembly of wakeup codeflow ? |
| 22:49.29 | cr2_ | yes |
| 22:49.32 | miknix | BabelO, hum.. I know what it is |
| 22:49.57 | miknix | BabelO, you are not setting num_chipselect |
| 22:49.58 | Marex | sent ... |
| 22:50.04 | cr2_ | BabelO: ts works now ? |
| 22:50.23 | miknix | BabelO, your SPI master may not need it, but my kernel version needs it |
| 22:50.57 | BabelO | cr2_: no does not work, i still no get irq on touchscreen press |
| 22:51.05 | cr2_ | hmm. |
| 22:51.46 | cr2_ | Marex: switch to Thumb |
| 22:51.52 | cr2_ | Marex: that explains it ;) |
| 22:52.08 | Marex | sure, it's mostly in thumb |
| 22:52.18 | Marex | ah yea ... -M force-thumb ;) |
| 22:52.24 | miknix | BabelO, omap_spi100k.c:587 add "unsigned num_chipselect = 1;" |
| 22:53.11 | BabelO | miknix: ok, i did not need it, do you take my latest spi100k ? |
| 22:53.17 | miknix | yes |
| 22:54.02 | miknix | BabelO, that chipselect is needed for me when calling spi_register_master() on probe() |
| 22:54.14 | BabelO | ok |
| 22:55.18 | BabelO | miknix: so now you can help me to find the irq problem :) |
| 22:55.46 | BabelO | cr2_: ok you are right, my gpio issue is like you say :) |
| 22:55.58 | miknix | BabelO, I think that was the problem, I didnt test though. But I remember having this issue when I first tried or driver |
| 22:56.37 | miknix | grrrrrr! fuc**ng activesync |
| 22:56.37 | Banji | i |
| 22:56.48 | Banji | i put the new version |
| 22:56.59 | BabelO | Banji: and ? ;) |
| 22:56.59 | Banji | but appear "familiar login" |
| 22:57.06 | BabelO | not possible |
| 22:57.07 | Banji | is the same |
| 22:57.28 | BabelO | Banji: the version cr2 told you start on Qtopia guy |
| 22:57.46 | BabelO | and login is root, password is empty |
| 22:57.55 | Banji | yes |
| 22:58.05 | *** join/#htc-linux Banji (n=ontv@87-196-207-38.net.novis.pt) |
| 22:58.40 | BabelO | Banji: you copy the Qtopia.exe and the bz2 on root of your sd card ? on a fat partition and then under wince you start the .exe ? |
| 22:59.06 | *** join/#htc-linux Banji (n=ontv@87-196-207-38.net.novis.pt) |
| 22:59.24 | Banji | they have one tutorial when i learn to install step by step the linux in qtek |
| 22:59.30 | miknix | BabelO, yes.. that was the problem. it now works. I see you added a lot of register dump to the driver :p |
| 23:00.44 | Banji | .... |
| 23:01.26 | Banji | ??? |
| 23:01.37 | BabelO | Banji: no you don't need if you get the .exe and the .bz2 file |
| 23:02.13 | Banji | [BabelO]: what the *.exe and what the bz2 |
| 23:02.53 | BabelO | Banji: get only the two file from here http://linuxtogo.org/~htcpxa/htcblueangel/Qtopia/ |
| 23:03.08 | BabelO | Banji: copy both file on your sd card at the top |
| 23:03.18 | BabelO | and then under wince sleect and start the .exe file |
| 23:03.38 | BabelO | Banji: it i s an automatic install |
| 23:03.46 | Banji | but my sd card have one or two partitions? |
| 23:03.51 | cr2_ | miknix: 124 0x7c i2c cpld gpio reset ? 0,msleep 1, 1 |
| 23:04.07 | BabelO | Banji: only one fat partition is needed |
| 23:04.14 | cr2_ | miknix: it seems if the i2c cpld is not cooperative, you can kick it :) |
| 23:04.26 | Banji | hum only fat32 partition? |
| 23:04.42 | Banji | ok i´m going to expriment |
| 23:05.08 | miknix | cr2_, lol. I'll look at that later. I'm going to turn into SPI with BabelO |
| 23:05.16 | cr2_ | ok. |
| 23:06.00 | cr2_ | miknix: a good idea, imho it only needs soem driver adjustments now. |
| 23:06.03 | *** join/#htc-linux surgex0 (n=surge@pool-71-186-234-216.bflony.fios.verizon.net) |
| 23:06.22 | *** join/#htc-linux CyberScript32_ (n=ontv@87-196-207-38.net.novis.pt) |
| 23:07.25 | miknix | cr2_, that, and because I'm not getting the importance of i2c/cpld yet |
| 23:08.59 | *** join/#htc-linux surgex0 (n=surge@pool-71-186-234-216.bflony.fios.verizon.net) |
| 23:09.33 | cr2_ | miknix: these are power/reset gpios for some devices. |
| 23:14.35 | BabelO | cr2_: no vibra :( |
| 23:20.50 | cr2_ | BabelO: hmm. |
| 23:21.12 | cr2_ | BabelO: does nled ctl works for you ? |
| 23:21.30 | BabelO | cr2_: what is that ;) |
| 23:21.40 | BabelO | cr2_: ah on haret |
| 23:21.56 | cr2_ | miknix: i've located the actual i2c_send function. i only need to understand its 4 parameters ;) |
| 23:22.05 | cr2_ | nledon |
| 23:22.14 | miknix | cr2_, awesome |
| 23:22.15 | cr2_ | i think vibra is 1. |
| 23:24.43 | cr2_ | ldrlsb and ldrhih |
| 23:24.50 | cr2_ | never seen them before :) |
| 23:32.41 | *** join/#htc-linux surgex0 (n=surge@pool-71-186-234-216.bflony.fios.verizon.net) |
| 23:32.42 | cr2_ | miknix: what is gpio_0x7e ? sd readonly ? |
| 23:33.00 | cr2_ | or sd_detect |
| 23:33.25 | cr2_ | sd_detect is more probable |
| 23:42.54 | cr2_ | miknix: 0x34 and 0x35 seem to define the LCD tyep |
| 23:43.19 | miknix | cr2_, LCD type? |
| 23:44.44 | cr2_ | yes |
| 23:44.50 | cr2_ | miknix: do you have ir ? |
| 23:45.01 | BabelO | cr2_: i think i ve done a wrong driver |
| 23:45.20 | Marex | cr2_, do you have the disassembly for me ? ;) |
| 23:45.47 | *** join/#htc-linux patoche (n=pat@lns-bzn-56-82-255-206-113.adsl.proxad.net) |
| 23:46.06 | BabelO | cr2_: what is the standard work ? tsc driver detect interrupt and then it start the spi bus transfer ? or the spi bus should detect the irq and ask tsc about regioster values ? |
| 23:48.09 | cr2_ | you touch, get the irq and start spi transfer |
| 23:48.19 | cr2_ | Marex: which one ? |
| 23:48.48 | Marex | cr2_, palmld ipl ... the one I sent you |
| 23:51.25 | cr2_ | miknix: and 0x33 and 0x36 for lcd type. |
| 23:51.47 | cr2_ | miknix: one of the lcd power gpios is on the i2c cpld |
| 23:51.55 | cr2_ | Marex: it looks like junk |
| 23:52.41 | Marex | cr2_, though it really is the IPL |
| 23:53.02 | miknix | cr2_, yes I have IR. lcd type is important for me. I have some clock interference on the omapfb |
| 23:53.03 | cr2_ | miknix: vibrator is cpld(4,8) |
| 23:53.10 | Marex | yiou can download palmld update, extract ipl from there and see they are the same |
| 23:54.13 | cr2_ | miknix: so you can't wakeup LCD and use vibra without the i2c cpld driver. |
| 23:54.37 | miknix | lol.. not that important |
| 23:54.53 | miknix | if I was a girl, then yes I would like the vibra working quickly |
| 23:54.54 | miknix | :o |
| 23:55.35 | cr2_ | miknix: i find ringtone annoying, and never use it |
| 23:55.47 | cr2_ | miknix: what is flashlight ? |
| 23:56.24 | cr2_ | miknix: 3 types of LCD: sony, toppoly and "sumsung" :) |
| 23:57.12 | miknix | cr2_, the camara led for flashing ppl eyes |
| 23:57.57 | cr2_ | 2,10; 2,20; 2,40 and 2,80 are the lcd gpios too. |
| 23:58.01 | cr2_ | ok. |
| 23:58.31 | miknix | cr2_, cool, I'm going to get the gpios values for lcd type |
| 23:58.50 | cr2_ | hmm. 0x50, 0x51 and 0x53. toppoly lcdspi again ? |
| 23:59.42 | miknix | whit |
| 23:59.49 | miknix | s/w/s/ |