| 00:20.58 | *** join/#htc-linux zwox (i=zwox@par69-7-82-243-234-94.fbx.proxad.net) |
| 00:21.17 | *** join/#htc-linux tylerh (n=tyler@74-131-16-58.dhcp.insightbb.com) |
| 01:27.24 | swetland | enjoy... http://git.android.com/?p=kernel.git;a=summary |
| 02:28.50 | *** join/#htc-linux Sliss_ (n=chatzill@193.206-241-81.adsl-dyn.isp.belgacom.be) |
| 02:46.43 | *** join/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-7a1bf2913e2cfa09) |
| 03:05.15 | *** join/#htc-linux mib_8xli4l (i=180af19c@gateway/web/ajax/mibbit.com/x-8ff5f70cf37be86e) |
| 03:06.10 | mib_8xli4l | did you guys see that android git now has SD support? |
| 03:18.43 | *** join/#htc-linux ndavey (n=neil@pc075650.workstation.griffith.edu.au) |
| 03:34.58 | *** join/#htc-linux mib_8xli4l (i=180af19c@gateway/web/ajax/mibbit.com/x-0901e0f090f7f192) |
| 04:14.06 | *** join/#htc-linux goxboxlive (n=goxboxli@195.159.97.196) |
| 04:38.14 | *** join/#htc-linux k3asd (n=k3asd@82.84.223.113) |
| 05:46.23 | *** join/#htc-linux rob_w|laptop (n=rob@p549BA2F0.dip0.t-ipconnect.de) |
| 05:54.30 | *** join/#htc-linux kiozen (n=kiozen@p54929C85.dip0.t-ipconnect.de) |
| 06:31.29 | *** join/#htc-linux JoshuaRL (i=18ffc737@gateway/web/ajax/mibbit.com/x-25cc9846aed19904) |
| 06:51.24 | *** join/#htc-linux par (i=par@dipole.idlepattern.com) |
| 07:14.46 | *** join/#htc-linux BabelO (n=Fabrice@unaffiliated/babelo) |
| 07:41.04 | *** join/#htc-linux ovod (n=ovod@wn1nat32.beelinegprs.ru) |
| 07:42.16 | *** join/#htc-linux marbalon (n=marbalon@212.122.223.98) |
| 07:51.25 | marbalon | Raven_coda: hi |
| 07:53.11 | marbalon | I try to add you TS driver and my keybord to linux-msm snapshot, try it and make a diff |
| 07:53.27 | marbalon | when I'm finish I put it on the forum |
| 07:57.22 | *** join/#htc-linux patoche (n=patoche@77.197.38.63) |
| 08:01.51 | *** join/#htc-linux Sliss (n=chatzill@212.71.15.163) |
| 08:10.57 | Sliss | how do I chnage the alsamixer if I can't open the alsamixer in the qterminal? it gives an vt100 error |
| 08:13.52 | *** join/#htc-linux |patoche| (n=patoche@77.197.38.63) |
| 08:14.24 | *** join/#htc-linux Babel1 (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
| 08:17.54 | *** join/#htc-linux Sliss (n=chatzill@212.71.15.163) |
| 08:48.45 | Sliss | I have a hard time connection to usb0 or even setting it up so I can connect to my phone.. any tips to a howto? |
| 09:12.23 | BabelO_ | Sliss: what do you want ? |
| 09:12.39 | Sliss | to connect to my device |
| 09:12.52 | Sliss | auto usb0 doesnt work |
| 09:17.00 | Sliss | I guess it is a kernel problem of the ubuntu hardy |
| 09:26.29 | BabelO_ | Sliss: not a problem don't think what do you set as ip adress of your device ? |
| 09:27.02 | BabelO_ | and check on host modprobe usbnet and also that in dmesg you see a line rndis dmesg|grep rndis |
| 09:45.33 | cr2 | hi |
| 09:46.01 | cr2 | BabelO_: big brother is watching you :) http://reactivated.net/fprint/wiki/Libfprint |
| 09:51.41 | cr2 | hehe. the 7200 and 7200A SD address spaces do not match. |
| 10:04.51 | BabelO_ | cr2: what is the chipset you have ? |
| 10:05.19 | BabelO_ | cr2: "downloading live fingerprint scans from the device" nice micro scanner ;) |
| 10:07.26 | cr2 | 1510 |
| 10:07.36 | cr2 | this library supports 1610 |
| 10:07.50 | cr2 | i doubt that they are different. |
| 10:15.03 | *** join/#htc-linux ndavey (n=neil@60-240-225-208-vic-pppoe.tpgi.com.au) |
| 11:25.12 | *** join/#htc-linux infernixx (i=nix@unaffiliated/infernix) |
| 11:34.25 | *** join/#htc-linux merc (n=xxmercur@24-181-29-60.dhcp.smyr.ga.charter.com) |
| 11:39.20 | Sliss | BabelO_> I set the device to dhcp... modprobe usbnet gives errors as the usbnet.ks isnt there |
| 11:39.32 | Sliss | usbnet.ko |
| 11:40.24 | Sliss | I have to find out why ubuntu hardy does not give install it by default |
| 11:41.16 | Sliss | my kernel = 2.6.24-12-rt I saw the usbnet.ko file on the 2.6.24-12 though |
| 11:44.00 | marbalon | Raven_coda: hallo ? |
| 11:54.39 | *** join/#htc-linux frato (n=frato@p4FCB48C2.dip.t-dialin.net) |
| 12:39.50 | *** join/#htc-linux dcordes (n=kaiser@f049170193.adsl.alicedsl.de) |
| 12:55.47 | dcordes | Raven_coda: great you have the touchscreen working |
| 13:04.20 | dcordes | is touchscreen calibration a low level driver problem or can it be solved in userland? |
| 13:05.58 | dcordes | cr2: msm |
| 13:06.01 | dcordes | Qualcomm MSM 7X00A SDCC Driver is out |
| 13:06.30 | cr2 | dcordes: change the number the devices from 4 to 2, and move the base addresses |
| 13:07.14 | cr2 | s/the devices/of devices/ |
| 13:07.38 | dcordes | cr2: in raven coder's driver? |
| 13:07.55 | cr2 | in the git SDIO driver |
| 13:08.05 | swetland | 7200 has only two instances of the SDCC, as cr2 points out |
| 13:08.59 | dcordes | oh so in 7500 one can use 4 peripheral devices connected to sdio? |
| 13:09.55 | cr2 | you have 2 controllers. |
| 13:10.05 | swetland | I'm a bit fuzzy on if 7500 is closer to 7200 or 720xA in configuration. Their chipset numbering is a bit puzzling at times. |
| 13:14.13 | *** join/#htc-linux SmallR2002 (n=SmallR20@79-77-76-226.dynamic.dsl.as9105.com) |
| 13:15.19 | cr2 | swetland: it's a great step forward anyway. loading a huge ramdisk into 64MB RAM seems to be a big problem for msm* people. |
| 13:16.23 | cr2 | dcordes: the SD controller of your interest is at 0xa0300000 on kaiser |
| 13:16.40 | cr2 | see http://wiki.xda-developers.com/index.php?pagename=KaiserMemoryMap |
| 13:16.42 | dcordes | cr2: the one which has the card? |
| 13:16.47 | cr2 | yes. |
| 13:16.57 | swetland | still a work in progress. we're fighting with the DMA controller and things will be updated once that's sorted out ,other bugs are fixed, etc, etc |
| 13:17.19 | cr2 | the second one is the acx100 (ti125x) |
| 13:17.23 | swetland | cr2: I still don't understand why people don't just use the NAND |
| 13:17.37 | swetland | does the driver not work with these devices people are hacking on? |
| 13:17.47 | dcordes | swetland: the sd? |
| 13:17.53 | swetland | the NAND driver |
| 13:17.55 | cr2 | swetland: i don't have the device, so cannot test |
| 13:18.05 | swetland | which was released with the first source drops months ago |
| 13:18.15 | dcordes | swetland: did not try and I don't know about other msm owners who did |
| 13:18.38 | dcordes | afaik what I do is loading everything into ram |
| 13:18.48 | swetland | nods |
| 13:18.56 | dcordes | kernel and 20mb android filesystem |
| 13:19.07 | dcordes | which is very unreliable as cr2 said |
| 13:19.32 | cr2 | the s3c2410 nand driver does not work for me on hermes |
| 13:21.17 | dcordes | cr2: how would I go about trying nand? |
| 13:21.48 | cr2 | compile the driver into the kernel, and check dmesg if it's identified first. |
| 13:22.04 | cr2 | works for me on hermes. |
| 13:22.19 | cr2 | then you can check if you can read the data. |
| 13:22.32 | dcordes | ok I just pulled the latest stuff. Could try the ts driver at the same time |
| 13:22.46 | cr2 | ok. |
| 13:23.16 | dcordes | I'm currently in branch * msm-2.6.24 is that what I want? |
| 13:24.58 | dcordes | dzo says something aboit branch android-msm I can't figure how to get this |
| 13:25.13 | dcordes | s/aboit/about/ |
| 13:25.21 | swetland | git checkout -b android-msm origin/android-msm |
| 13:25.41 | swetland | though you should do a git remote update first since I just realized I forgot to merge down to android-msm yesterday and just updated it |
| 13:25.47 | marbalon | for every one who interested witch Kaiser http://forum.xda-developers.com/showthread.php?t=383695&page=17 |
| 13:27.14 | dcordes | marbalon: that's great thanks |
| 13:28.18 | dcordes | swetland: I cloned branch msm-2.6.24, Ãpulled, then I changed to android-msm and git replied Warning: No merge candidate found because value of config option "branch.android-msm.merge" does not match any remote branch fetched. |
| 13:29.08 | swetland | odd |
| 13:29.11 | dcordes | (after a second Ãpull) |
| 13:29.19 | swetland | I generally work like this: |
| 13:29.31 | swetland | % git clone git://git.android.com/kernel.git kernel |
| 13:29.33 | swetland | % cd kernel |
| 13:29.42 | swetland | % git checkout -b android-msm origin/android-msm |
| 13:29.49 | swetland | then to update: |
| 13:29.52 | swetland | % git remote update |
| 13:30.02 | swetland | % git rebase origin/android-msm |
| 13:30.36 | swetland | I suggest against using pull, as it's magic auto-merge stuff is often not what you want (well, certainly not what I want) |
| 13:30.45 | swetland | s/it's/its/ |
| 13:31.26 | dcordes | ok will reclone and all. thanks |
| 13:31.44 | swetland | shouldn't have to do that |
| 13:31.49 | swetland | just try: |
| 13:31.51 | swetland | git remote update |
| 13:31.56 | dcordes | nevermind too late |
| 13:31.59 | swetland | git checkout -b new-android-msm origin/android-msm |
| 13:32.04 | swetland | git branch -D android-msm |
| 13:32.07 | swetland | or something like that |
| 13:33.34 | dcordes | swetland: what is the cc for in sdcc? controller something? |
| 13:34.32 | swetland | secure digital card controller, iirc |
| 13:36.06 | dcordes | swetland: can you tell me where in the source I can find the addresses for the sd controllers? |
| 13:36.25 | swetland | include/asm-arm/arch-msm/msm_iomap.h |
| 13:37.42 | swetland | I *believe* the controllers (apart from quantity and base address) are compatible between 7200/7200A/etc, but I don't actually do any work on 7200 or 7500 hardware so I have not had a chance to test it |
| 13:44.09 | dcordes | swetland: err where would I change the base address? drivers/mmc/host/msm_sdcc.c? |
| 13:44.58 | swetland | include/asm-arm/arch-msm/msm_iomap.h |
| 13:47.30 | *** join/#htc-linux patoche (n=patoche@77.197.38.63) |
| 13:48.05 | dcordes | swetland: simply remove each three lines for sdc3 and sdc4? |
| 13:50.48 | *** join/#htc-linux Robert__ (n=robert@p5086E3F8.dip.t-dialin.net) |
| 13:51.07 | Robert__ | hello |
| 13:51.16 | Robert__ | I am looking for kernel sources/patches suitable for HTC Himalaya |
| 13:51.44 | Robert__ | I've got an 2.6.12-hh2-xda0-ba0 image, but I am actualle looking for the sources. does anyone know where to get these? |
| 13:53.53 | dcordes | cr2: 0xa0300000 according to memory map is the phys address. what is the base address? |
| 13:58.44 | dcordes | Robert__: http://handhelds.org/cgi-bin/cvsweb.cgi/linux/kernel26/ |
| 13:59.30 | dcordes | arch/arm/mach-pxa/htchimalaya/ |
| 14:01.44 | Robert__ | dcordes: thanks. is this the same as the xanadux-sources? |
| 14:01.59 | BabelO_ | Robert__: this sources are more up to date |
| 14:02.01 | dcordes | I think xanadux is osolete |
| 14:02.15 | BabelO_ | Robert__: You can try but maybe you need some work of merge from xanadux cvs |
| 14:04.13 | dcordes | Raven_coda: can you help me with include/asm-arm/arch-msm/msm_iomap.h? |
| 14:04.19 | Robert__ | I already tried these sources, but the zImage did not boot. so I thought some patches are missing |
| 14:04.35 | Robert__ | because the current kernel also has the xda0 patchset |
| 14:05.20 | dcordes | Robert__: since hh.org is the central place for htc development (for now) I assume everything should be in there |
| 14:07.00 | Robert__ | but the kernel should be bootable with hret? |
| 14:07.39 | dcordes | Robert__: in case you selected the right config, I think so |
| 14:07.45 | cr2 | Robert__: the himalaya kernel misses most devices. |
| 14:07.54 | cr2 | dcordes: check this one arch/arm/mach-msm/common.c |
| 14:08.25 | cr2 | dcordes: there are 4 devices there. |
| 14:08.27 | Robert__ | ok, I will recheck my configuration then |
| 14:08.51 | cr2 | dcordes: you want only 2, and you want to change the addresses for them. |
| 14:08.57 | Robert__ | but if anyone has a working one for himalaya, I would be glad :) |
| 14:09.11 | raph_ael | dcordes: i once tried exactly hh.org in a browser |
| 14:09.37 | cr2 | remove extra devices here too arch/arm/mach-msm/io.c |
| 14:09.50 | cr2 | and look here |
| 14:09.52 | cr2 | include/asm-arm/arch-msm/msm_iomap.h |
| 14:10.16 | cr2 | 7200A has 4,5,6,7 |
| 14:10.24 | cr2 | you want 3,4 on 7200 |
| 14:10.36 | dcordes | cr2: in our memory map we have 0 and 1. are these 1 and 2 in the sourcE? |
| 14:10.38 | cr2 | +#define MSM_SDC1_PHYS 0xA0400000 |
| 14:10.41 | dcordes | oh I see |
| 14:10.52 | cr2 | should be +#define MSM_SDC1_PHYS 0xA0300000 |
| 14:10.56 | cr2 | for 7200 |
| 14:11.09 | cr2 | +#define MSM_SDC2_PHYS 0xA0400000 |
| 14:11.12 | cr2 | for wifi |
| 14:11.35 | dcordes | first of all I'm removing the unneeded devices |
| 14:11.40 | cr2 | ok. |
| 14:12.41 | cr2 | Robert__: you need to adapt the device drivers for himalaya using blueangel. the differences are only in the GPIO numbers and config. |
| 14:13.13 | dcordes | cr2: in msm_iomap.c are sdc1,2,3,4 and I want to keep 3 and 4? |
| 14:13.23 | cr2 | 1 and 2 |
| 14:13.50 | cr2 | i meant the offset from 0xA* |
| 14:13.58 | dcordes | ah ok |
| 14:14.02 | cr2 | devices are sdc1 and sdc2 |
| 14:14.17 | cr2 | the addresses are 0xA0300000 and 0xA0400000 |
| 14:14.25 | cr2 | everything else should be the same. |
| 14:14.35 | cr2 | the power is a different issue. |
| 14:15.09 | dcordes | I set phys to 3 and 4 in iomap.h hat about base? |
| 14:15.27 | dcordes | 0xA0300000 and 0xA0300000 I mean |
| 14:20.39 | cr2 | change the #define MSM_SDC1_PHYS and MSM_SDC2_PHYS definitions, and remove the sdc3(SDC3) and sdc4(SDC4) everywhere. |
| 14:24.14 | dcordes | cr2: ok removed also static struct platform_device/resource for 3 and 4 in common.c. also removed the according entries for 3 and 4 in function "static struct map_desc msm_io_desc[] __initdata" in io.c |
| 14:25.27 | dcordes | I'm leaving MSM_SDC2_BASE in the iomap header as they are? |
| 14:32.26 | cr2 | ? |
| 14:33.59 | dcordes | cr2: I wonder whether or not I need to change MSM_SDC1_BASE and MSM_SDC2_BASE in msm_iomap.h. |
| 14:34.42 | cr2 | you need to change them |
| 14:35.24 | dcordes | where to look up into what I need to change them? |
| 14:36.56 | cr2 | +#define MSM_SDC1_PHYS 0xA0300000 |
| 14:37.02 | cr2 | +#define MSM_SDC2_PHYS 0xA0400000 |
| 14:37.36 | dcordes | already did that. I mean the BASE lines |
| 14:43.44 | *** join/#htc-linux rob_w|laptop (n=rob@p549BA2F0.dip0.t-ipconnect.de) |
| 14:49.14 | dcordes | hm |
| 14:55.32 | kiozen | cr2: as the log is broken, did you find out anything else about the IGN files? |
| 14:57.13 | cr2 | kiozen: yes. they just work. |
| 14:57.26 | cr2 | kiozen: i'll pastebin my local log. |
| 14:57.38 | kiozen | but not with GT |
| 14:58.09 | kiozen | gdal does not recognise the projection |
| 14:59.00 | cr2 | # NTF (Paris) / Lambert zone II |
| 14:59.15 | cr2 | epsg:27572 |
| 14:59.31 | cr2 | take one file (file.tif) and do |
| 15:00.01 | cr2 | gdalwarp -s_srs epsg:27572 -t_srs epsg:54004 file.tif fileM.tif |
| 15:00.31 | kiozen | ok, you warped them |
| 15:00.52 | cr2 | then i've loaded fileM.tif in qgis , switched to mercator ... |
| 15:01.00 | cr2 | ok, but you can also do |
| 15:01.12 | BabelO_ | cr2: franch programmer |
| 15:01.14 | cr2 | gdalwarp -s_srs epsg:27572 -t_srs epsg:27572 file.tif fileIGN.tif |
| 15:01.17 | BabelO_ | cr2: procedure ClearListeForSuicide( nMem : integer; boUnableToAccess : Boolean); |
| 15:01.32 | cr2 | lol |
| 15:01.44 | *** join/#htc-linux TimRiker (n=timr@70-7-163-182.area7.spcsdns.net) |
| 15:01.53 | cr2 | BabelO_: now i know why the companies don't like to publish the source :) |
| 15:02.43 | kiozen | I do such easter eggs pretty often in my code, by that I know if anyone ever looked at it :) |
| 15:02.46 | cr2 | kiozen: this one is not warping anything, just adds the right WKT |
| 15:04.25 | cr2 | dcordes: you can leave the (virtual) BASE as is. |
| 15:06.51 | kiozen | BabelO_: ahh , c'est Grenoble :) |
| 15:06.52 | BabelO_ | kiozen: i did not see such in qlandkarte ;) |
| 15:07.11 | BabelO_ | kiozen: yes, If you want i can get other kind of maps |
| 15:07.13 | kiozen | BabelO_ not in open source, OS is a serious thing ;) |
| 15:07.42 | infernixx | dcordes: ping? |
| 15:08.01 | kiozen | BabelO_: it's matching the Garmin map perfectly |
| 15:08.21 | BabelO_ | kiozen: and only 96dpi |
| 15:08.36 | cr2 | kiozen: i've checked one the BabelO_ images, and OSM has more small streets :) |
| 15:08.58 | kiozen | yes they collect every footpath :) |
| 15:09.33 | kiozen | BabelO_: 100dpi is enought for maps, 300 dpi is the limit 600 dpi is overkill |
| 15:11.04 | dcordes | cr2: ok. So I changed 3 files now: msm_iomap.h, common.c and io.c |
| 15:11.10 | dcordes | infernixx: pong |
| 15:11.29 | kiozen | cr2: City Nav. 2006 has even less roads |
| 15:12.00 | infernixx | hi :) do you have a driver for the kaiser keyboard? |
| 15:13.16 | infernixx | i saw you talk about it but didn't read where you got it in the backlog |
| 15:14.57 | *** join/#htc-linux patoche (n=root@lns-bzn-33-82-252-3-134.adsl.proxad.net) |
| 15:16.37 | Raven_coda | hello |
| 15:16.57 | Raven_coda | dcordes, did you get what you needed ? |
| 15:23.34 | dcordes | Raven_coda: I think so |
| 15:23.59 | dcordes | infernixx: http://forum.xda-developers.com/showpost.php?p=2119335&postcount=161 |
| 15:24.21 | dcordes | Raven_coda: I was fiddling with SD check scrollback. maybe you can help |
| 15:24.53 | infernixx | dcordes: sweet. thanks |
| 15:25.33 | Raven_coda | not sure how much help I could be there |
| 15:25.40 | Raven_coda | haven't even looked at it yet |
| 15:32.51 | *** join/#htc-linux Marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 15:40.51 | *** join/#htc-linux goxboxlive (n=goxboxli@208.84-48-176.nextgentel.com) |
| 15:40.52 | Raven_coda | scite& |
| 15:40.52 | Raven_coda | ha, sorry |
| 15:46.28 | *** join/#htc-linux pH5 (n=ph5@e178220088.adsl.alicedsl.de) |
| 15:49.22 | *** join/#htc-linux Marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 15:54.09 | Robert__ | cr2, dcordes: so I've compiled latest 2.6 kernel from cvs, but hret cannot load the kernel |
| 15:54.15 | *** join/#htc-linux patoche (n=root@lns-bzn-33-82-252-3-134.adsl.proxad.net) |
| 15:54.30 | Robert__ | last message is "Jumping to kernel". any ideas how to debug? |
| 15:58.24 | cr2 | Robert__: on himalaya ? |
| 15:59.25 | Robert__ | yes. I used "make htchimalaya_static_defconfig" |
| 16:01.30 | cr2 | i tested with htchimalaya_defconfig |
| 16:01.43 | Robert__ | just turned eabi off, because I compiled with gcc 3.4.1 |
| 16:01.53 | Robert__ | hm ok I will try that, too |
| 16:03.55 | *** join/#htc-linux CVirus (n=GoD@82.201.178.187) |
| 16:06.05 | *** join/#htc-linux goxboxlive (n=goxboxli@208.84-48-176.nextgentel.com) |
| 16:16.54 | cr2 | kiozen: 76Cx is the best http://www.globetrotter.de/de/shop/detail.php?mod_nr=gm_06050&k_id=&hot=0 |
| 16:17.49 | kiozen | they din't asked me, damed facke polls |
| 16:18.04 | kiozen | s/facke/fake/ |
| 16:18.23 | cr2 | http://www.globetrotter.de/de/shop/a_z_result.php?swort=Garmin+Aktion&utm_source=NL0408&utm_medium=Newsletter&utm_term=garmin&utm_content=Kartenkunde&utm_campaign=Newsletter |
| 16:18.30 | kiozen | cr2: I updated the tutorial |
| 16:18.31 | cr2 | i mean, it's not in the list :) |
| 16:19.19 | cr2 | i wish somebody had run haret on colorado 300 |
| 16:19.32 | cr2 | ok, i'll read it |
| 16:19.39 | kiozen | who cares about Garmin, If Cayman Islands would disappear I wouldn't notice |
| 16:20.33 | cr2 | is colorado 300 waterproof ? |
| 16:20.55 | kiozen | cr2: same as 60 |
| 16:21.15 | kiozen | cr2: but I doubt they use wince |
| 16:22.00 | Robert__ | cr2: I tried the 2.6.12 kernel vom xanadux cvs. it also doesn't boot. very strange... which cross-compiler do you use? |
| 16:22.31 | Robert__ | does the kernel-image need postprocessing or so? |
| 16:23.22 | cr2 | kiozen: ok. i friend of mine wants to buy a cheap one from this list, so he asks about the maps for hiking. are there any ? |
| 16:23.44 | kiozen | topo germany V2 |
| 16:24.01 | cr2 | Robert__: 2.6.12 is really obsolete |
| 16:24.02 | kiozen | but Garmin is not cheap, it's a rip off |
| 16:24.15 | cr2 | kiozen: do you have a link ? |
| 16:24.40 | Robert__ | cr2: yes, of course. but I just wanted to check if something is wrong in the toolchain I use |
| 16:25.14 | kiozen | cr2: http://www.garmin.de/karten/outdoor/deutschland_v2.php |
| 16:25.14 | cr2 | kiozen: i can't tell him "buy some 31377 linux pda". he has 3 kids :) |
| 16:25.42 | cr2 | thanks. |
| 16:27.02 | kiozen | cr2: 3 kids are a good reason for a PDA, or do you think I am searching caves and graves in the forest just for fun? |
| 16:27.19 | kiozen | and the Garmin map wil not have these goodies |
| 16:28.21 | NeTTwerk | has anyone had any luck with the SD driver? |
| 16:36.27 | dcordes | cr2: are there other files I need to change among include/asm-arm/arch-msm/msm_iomap.h,arch/arm/mach-msm/[common.c|io.c] ? |
| 16:46.13 | dcordes | infernixx: did you patch marbalon's patch against latest android-msm branch and built the kernel? |
| 16:46.25 | cr2 | dcordes: don't think that you need other changes. |
| 16:46.34 | cr2 | does it compile ? |
| 16:46.41 | dcordes | did not try yet. but will do now |
| 16:47.08 | Robert__ | cr2: ah, the non-static configuration boots now |
| 16:47.26 | Robert__ | but I get "unable to open initial console" using my initrd |
| 16:47.29 | dcordes | what's the difference between the static and normal make defconfig? |
| 16:48.24 | Robert__ | dcordes: I think in the nonstatic, modules are used |
| 16:48.51 | dcordes | Robert__: did you install the modules into your initrd then? (just comes to mind) |
| 16:49.22 | Robert__ | dcordes: no, I compiled everything I need into the kernel |
| 16:52.26 | infernixx | dcordes: no not yet, perhaps tonight |
| 16:53.25 | cr2 | Robert__: it's ok, and may have something to do with your non-eabi kernel |
| 16:54.13 | cr2 | Robert__: get the eabi compiler from codesourcery. or the arm920 toolchain for qtopia |
| 16:56.51 | Robert__ | hmm maybe it's because /dev/console is missing in my initrd |
| 16:57.38 | *** join/#htc-linux patoche (n=root@lns-bzn-33-82-252-3-134.adsl.proxad.net) |
| 16:59.25 | dcordes | cr2: getting tricky now: the .config provided by dzo does not contain SD yet |
| 16:59.51 | dcordes | how do I get the right config in now, while sustaining the right config? |
| 17:00.06 | dcordes | s/the right config/sd/ |
| 17:02.37 | Robert__ | dcordes: for what device are you compiling? |
| 17:05.02 | Robert__ | cr2: the problem was that /dev/console was missing in my initrd... |
| 17:07.41 | cr2 | ok |
| 17:07.54 | infernixx | MAKEDEV generic |
| 17:08.02 | NeTTwerk | whoops, 7200 only has 2 sd interfaces? |
| 17:08.07 | infernixx | doesn't hurt to have standard devices |
| 17:13.25 | dcordes | NeTTwerk: yes check the logs. everything sorted out there |
| 17:13.33 | Robert__ | but too bad that I cannot access the device via usbnet now |
| 17:13.42 | Robert__ | although usb0 seems to be up on the device |
| 17:15.54 | Robert__ | with the old kernel I saw the device in my host in "lsusb", not there is nothing... is there a special option to switch on in the kernel? |
| 17:16.27 | NeTTwerk | dcordes: ok, well whenever you guys have patches, just hit me up and I'll integrate them. |
| 17:16.46 | dcordes | NeTTwerk: did you host a patched tree? |
| 17:16.54 | NeTTwerk | dcordes: I'm the author of the SD driver |
| 17:17.05 | dcordes | NeTTwerk: nice :) |
| 17:17.08 | dcordes | san mehat? |
| 17:17.22 | NeTTwerk | i dont have a 7200, so i wasnt sure what that looks like. |
| 17:17.24 | NeTTwerk | yeah thats me. |
| 17:17.36 | dcordes | ok cool. I will try and build my modifications now |
| 17:17.50 | NeTTwerk | sweet. |
| 17:18.17 | cr2 | Robert__: hima ? you need to enable the driver with the correct PUEN gpio |
| 17:18.36 | cr2 | NeTTwerk: most devices have only 1 SD interface. |
| 17:19.14 | pH5 | cr2: older ones :) |
| 17:19.19 | NeTTwerk | older ones i imagine :) |
| 17:19.34 | infernixx | dcordes: the SD driver isnt in the patch, is it? |
| 17:19.48 | Robert__ | cr2: I do not fully understand. I compiled the g_ether driver into my kernel.. |
| 17:20.30 | dcordes | infernixx: right and not in the config |
| 17:20.39 | dcordes | NeTTwerk: http://pastebin.ca/986236 that's what I edited so far |
| 17:20.42 | NeTTwerk | sec |
| 17:20.54 | *** join/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-aab7ff9598ae8d42) |
| 17:21.52 | infernixx | dcordes: but i don't see any code for the sd driver in the patch |
| 17:22.23 | dcordes | infernixx: huh? I mean right as in right, it isn't in |
| 17:22.24 | NeTTwerk | dcordes: ahh the different PHYS addrs.. we'll obviously need to better conditionalize this stuff for *msm* |
| 17:22.27 | pH5 | Robert__: USB pull-up enable is usually driven by a GPIO pin. the host can only see the client once this is driven high. |
| 17:22.47 | NeTTwerk | dcordes: If you just shoot me the patches when you have something working, I'll look at integrating it nicely. |
| 17:22.49 | dcordes | NeTTwerk: yes that and removal of 3,4 |
| 17:23.04 | dcordes | NeTTwerk: ok thanks |
| 17:23.14 | infernixx | dcordes: grep -- '---' patch |
| 17:23.17 | NeTTwerk | dcordes: no problem... back to work... :).. that boss swetland is a tough taskmaster ;) |
| 17:23.20 | infernixx | nothing related to storage |
| 17:23.23 | pH5 | Robert__: GPIO_NR_HIMALAYA_USB_PULLUP_N, probably |
| 17:25.21 | infernixx | dcordes: oh, sorry :) my bad |
| 17:26.55 | dcordes | infernixx: did you apply the diff? |
| 17:27.28 | infernixx | no, i've just used provided zImage so far |
| 17:27.29 | dcordes | there are some rejects I fear that's too abstract for me *_* |
| 17:27.37 | infernixx | oh. well let me try |
| 17:27.51 | infernixx | whats the origin of patch.zip? |
| 17:28.50 | dcordes | marbalon. |
| 17:30.04 | cr2 | pH5: himalaya has 3 :) |
| 17:30.24 | Robert__ | pH5: hmm, so how do I set this pin to high? |
| 17:30.47 | infernixx | dcordes: i have only 1 failure, in the ARM makefile |
| 17:30.56 | pH5 | wth? |
| 17:31.02 | infernixx | dcordes: you first need to unapply the vogue patch |
| 17:31.05 | infernixx | patch -R |
| 17:31.20 | cr2 | pH5: 3 SD ports |
| 17:31.40 | cr2 | pH5: pxa263, asic3 and atiw3200 |
| 17:31.45 | pH5 | ah, I thought 3 PUEN gpios |
| 17:32.57 | cr2 | Robert__: it's just nobody had interest to do something on himalaya, so it's left a bit behind |
| 17:33.33 | *** join/#htc-linux the_sys0p (i=the_sys0@gateway/tor/x-f7c2d49778620932) |
| 17:33.38 | cr2 | but it's really easy to make it wors as blueangel |
| 17:33.47 | cr2 | s/wors/work/ |
| 17:34.14 | Robert__ | hm would be fine if I could do so :) |
| 17:36.13 | infernixx | dcordes: do you know what USB device is in the kaiser? |
| 17:37.08 | dcordes | infernixx: no. let's first get the patch working again |
| 17:37.22 | infernixx | works for me |
| 17:37.27 | dcordes | I'm patching against the bare tree |
| 17:37.28 | infernixx | clone linux-msn, apply patch |
| 17:37.39 | infernixx | fix the Makefile.rej |
| 17:37.42 | dcordes | infernixx: I was patching against branch android-msm |
| 17:38.07 | infernixx | there's android-msm and linux-msm? |
| 17:38.19 | dcordes | git.android.com lists the branches |
| 17:38.31 | Robert__ | pH5: the value for GPIO_NR_HIMALAYA_USB_PULLUP_N is the same in 2.6.12 sources, where usb worked... |
| 17:38.51 | dcordes | infernixx: afaik the vogue patch is to be used against android-msm (see the vogue page from dzo) |
| 17:39.14 | dcordes | obviously marbalon worked in the linux-2.6.24 branch then |
| 17:39.40 | dcordes | s/linux/msm/ |
| 17:39.40 | pH5 | Robert__: is the udc_command code the same? in hh.org htchimalaya_udc.c it looks like it fiddles some ASIC3 GPIO instead |
| 17:39.57 | infernixx | dcordes: the vogue patch applies to the same tree here. |
| 17:40.02 | infernixx | so i'm confused now |
| 17:44.04 | infernixx | dcordes: all I did here was patch -R vogue-diff, patch marbalons diff, fix makefile |
| 17:44.09 | Robert__ | pH5: there is no htchimalaya_udc.c in my kernel tree, hm |
| 17:44.22 | infernixx | then i added ARCH=arm and CROSS_COMPILE=arm-none-linux-gnueabi- to the Makefile |
| 17:45.21 | *** join/#htc-linux k3asd (n=k3asd@82.84.223.113) |
| 17:49.24 | pH5 | Robert__: sorry. what tree are you using? hh.org cvs had some changes by asylumed in 2006 |
| 17:49.48 | Robert__ | linux/kernel26 from hh.org |
| 17:50.11 | pH5 | huh? strange. |
| 17:50.47 | Robert__ | yes. before I start the kernel, I see the device as some microsoft stuff in lsusb |
| 17:50.56 | Robert__ | after booting, the ID disappears |
| 17:51.10 | pH5 | hm. it's arch/arm/mach-pxa/htchimalaya/himalaya_udc.c |
| 17:51.34 | *** part/#htc-linux BabelO_ (n=fcr@lun34-2-82-238-28-28.fbx.proxad.net) |
| 17:53.18 | dcordes | infernixx: marbalon's fix contains vogue patches (vogue patches=kaiser patches) |
| 17:53.20 | infernixx | dcordes: success, compiled a kernel (added some usb driver) |
| 17:53.22 | infernixx | boots |
| 17:53.41 | cr2 | is PUEN a pxa gpio or an asic3 gpio ? i don't rememebr |
| 17:53.42 | dcordes | great could you repeat w/o unncessary patch -R what you did? |
| 17:55.07 | infernixx | dcordes: patch marbalons diff, fix arch/arm/mach-msm/Makefile, add ARCH=arm and CROSS_COMPILE=arm-none-linux-gnueabi- to Makefile in the kernel root |
| 17:55.24 | cr2 | http://wiki.xda-developers.com/index.php?pagename=HimalayaGPIO |
| 17:55.54 | cr2 | pH5: wtf is pasic2 irq ? |
| 17:56.35 | pH5 | cr2: himalaya-gpio.h lists pxa gpio 60, himalaya-asic.h lists gpioa3 |
| 17:56.39 | pH5 | which one is it? |
| 17:56.57 | pH5 | pasic2 irq is the pasic2's ds1wm irq |
| 17:57.04 | pH5 | (1-wire) |
| 17:57.25 | dcordes | infernixx: and you did git clone what before? |
| 17:57.35 | pH5 | http://wiki.xda-developers.com/index.php?pagename=HimalayaASIC3 says gpioa3 is charge enable |
| 17:57.41 | dcordes | infernixx: could you paste Makefile please? |
| 17:57.58 | infernixx | git clone git://git.android.com/linux-msm.git |
| 17:58.31 | infernixx | kernel hangs when I slide it open :| |
| 17:58.57 | infernixx | http://pastebin.ca/986287 |
| 17:59.05 | dcordes | infernixx: slide it open before boot |
| 18:00.12 | pH5 | heh, and asic3 gpiod3 is labeled "OWM irq" |
| 18:00.19 | infernixx | http://pastebin.ca/986291 |
| 18:00.38 | pH5 | does hima use the ds1wm in pasic2 like blueangel or the one in asic3? |
| 18:01.24 | infernixx | dcordes: kernel hangs on any key input, actually. gonna try with marbalons zimage |
| 18:03.26 | *** join/#htc-linux marbalon (n=balon@aefr28.neoplus.adsl.tpnet.pl) |
| 18:03.26 | Robert__ | pH5: do you have any other idea for a quick fix? |
| 18:03.27 | cr2 | pH5: the 'charger enable' is not PUEN |
| 18:03.48 | cr2 | OWM irq is the ds1wm irq in pasic2 |
| 18:04.50 | cr2 | hmm. i need to check. |
| 18:05.08 | infernixx | dcordes: doesnt happen with marbalons zImage. you don't happen to know what toolchain he's using, do you? |
| 18:06.35 | marbalon | infernixx: i'm using arm-2007q3-53-arm-none-eabi-i686-pc-linux-gnu.tar.bz2 from www.codesourcery.com |
| 18:06.41 | infernixx | me too |
| 18:06.41 | cr2 | hm. GPIO_USB_PUEN |
| 18:06.48 | cr2 | it's and asic3 gpio. |
| 18:07.13 | Raven_coda | hello marbalon |
| 18:07.20 | Raven_coda | thx for cleaning up my driver |
| 18:07.26 | marbalon | Raven_coda: hello |
| 18:07.53 | marbalon | just use replace function in editor ;) |
| 18:07.55 | pH5 | cr2: do the 2.6.12 kernel sources also use GPIOA3 as PUEN? |
| 18:08.03 | pH5 | or do they use pxa GPIO 60? |
| 18:08.14 | Raven_coda | any progress on arrow keys? |
| 18:08.24 | pH5 | if the xda-dev pages are right, the hh.org sources are incorrect |
| 18:08.37 | cr2 | #define GPIOA_USB_PUEN 3 |
| 18:08.40 | dcordes | marbalon: against which branch does your patch go? |
| 18:08.54 | cr2 | pH5: the kernel source is more reliable |
| 18:09.01 | marbalon | Raven_coda: no, now try to make patch for SD card from linux-msm branch to android-msm |
| 18:09.13 | pH5 | cr2: but it contradicts itself (at least in the headers) |
| 18:09.26 | *** join/#htc-linux Oktal (i=mat@cpc3-cmbg8-0-0-cust1018.cmbg.cable.ntl.com) |
| 18:09.49 | cr2 | hmm. |
| 18:09.55 | cr2 | pH5: i'll check the dll |
| 18:10.01 | pH5 | cr2: thanks |
| 18:10.04 | infernixx | marbalon: i've been trying to compile a kernel for the kaiser with your patch, but when I press any key the kernel hangs. i get problems with almost any kernel config change. what toolset are you using? |
| 18:10.20 | Raven_coda | k, I'll look into them then |
| 18:10.48 | marbalon | infernixx: kernel or android ?? |
| 18:11.14 | infernixx | kernel (linux-msm) |
| 18:11.27 | infernixx | im using a console initrd |
| 18:11.48 | infernixx | cursor stops blinking. so i suspect it just hangs |
| 18:12.11 | marbalon | hmmm, i have no problem with keyboard, decordes too |
| 18:12.13 | infernixx | it doesn't happen with your zImage |
| 18:12.21 | infernixx | only when I compile the kernel with your patch |
| 18:12.34 | dcordes | marbalon: with your first zImage works |
| 18:13.13 | marbalon | give me a while I test it on my compile it from clean sources + patch |
| 18:14.13 | infernixx | patch fails on arch/arm/mach-msm/Makefile for me but thats simple to fix |
| 18:14.36 | Robert__ | pH5: were you talking about the usb problem I had? |
| 18:16.05 | pH5 | Robert__: yes, the current hh.org kernel sources don't seem to agree about which gpio PUEN is connected to. |
| 18:17.59 | infernixx | marbalon: ok there's a few differences with my config and yours, i'm trying again |
| 18:18.05 | Robert__ | ah okay, thanks a lot |
| 18:18.09 | *** join/#htc-linux kiozen (n=kiozen@rgnb-4db1dd27.pool.einsundeins.de) |
| 18:19.05 | Robert__ | pH5: I'm afk for maybe 2 hours. If you found out which value is correct, it would be great if you could leave me a message |
| 18:19.59 | pH5 | Robert__: sure. |
| 18:20.20 | BabelO | good evening |
| 18:20.28 | pH5 | hi BabelO |
| 18:20.37 | cr2 | pH5: no asic3 refs so far. |
| 18:21.29 | cr2 | 1c |
| 18:22.14 | cr2 | is gpsr1 |
| 18:22.16 | pH5 | cr2: I guess an easy test Robert__ could do would be to connect to haret via usb and clear/set gpio 60. if the connection breaks down, it's not the puen. |
| 18:22.40 | cr2 | 10000000 |
| 18:22.41 | pH5 | ah, there we go GPSR1=0x10000000 ? |
| 18:23.06 | infernixx | marbalon: ok, also hangs when i use your .config. kernel is also about 18kb smaller than your zImage |
| 18:23.11 | infernixx | i don't know what's up. |
| 18:23.35 | pH5 | ok, then it looks like the kernel sources are wrong, but the himalaya-gpio.h header is correct. |
| 18:23.36 | cr2 | pH5: yes, but i'll check further. it's gpio60 of course. |
| 18:23.36 | infernixx | boots fine but any keypress makes it get stuck |
| 18:24.08 | cr2 | pH5: i fear lkcl copied the BA asic3 header from ba |
| 18:24.24 | pH5 | cr2: plausible |
| 18:24.28 | cr2 | or somebody else |
| 18:24.38 | marbalon | infernixx: maybe we use different snapshot ?? |
| 18:24.59 | infernixx | i don't know, i did a git clone git://git.android.com/linux-msm.git last saturday |
| 18:25.02 | marbalon | I don't remember witch I use .... |
| 18:25.06 | cr2 | bit 8 |
| 18:25.30 | pH5 | cr2: the himalaya_udc.c even has a note by asylumed that it's copied from blueangel, so why not :) |
| 18:25.42 | cr2 | lol |
| 18:26.05 | cr2 | if puen is a pxa gpio, then this file is redundant. |
| 18:28.39 | marbalon | Raven_coda: hmm, sd driver is already merged to android-msm branch |
| 18:29.22 | Raven_coda | does it work? |
| 18:29.35 | marbalon | downloading.... |
| 18:30.20 | dcordes | marbalon: Raven_coda I already have an approach to a patch for kaiser SD. check it out: http://pastebin.ca/986236 |
| 18:30.34 | dcordes | basically it is device count 4>2 and changing the phys. addresses |
| 18:30.44 | *** join/#htc-linux Marex (n=marex@vasut.kolej.mff.cuni.cz) |
| 18:30.48 | pH5 | cr2: Robert__ could try to s/asic3_gpio_set_value(asic3_dev,GPIO_USB_PUEN/gpio_set_value(GPIO_NR_HIMALAYA_USB_PULLUP_N/ and if that works fold the udc setup back into htchimalaya.c like it's done for blueangel. |
| 18:30.51 | dcordes | didn't test yet.learning biology |
| 18:31.52 | cr2 | pH5: agreed |
| 18:32.12 | Raven_coda | dcordes, what's biology got to do with this? |
| 18:32.23 | cr2 | marbalon: is there a file simlar to arch/arm/mach-msm/board-halibut.c ? |
| 18:33.35 | dcordes | Raven_coda: it's easy: I'm learning stuff for school so I wasn't able to test the SD patches yet. |
| 18:34.00 | Raven_coda | ha, that works :) |
| 18:34.02 | marbalon | cr2: where in clean snapshot of android-msm branch ? |
| 18:34.29 | cr2 | marbalon: there should be some device-init.c file. |
| 18:34.35 | dcordes | Raven_coda: you could also put it in a different way: being good in biology will probably enable me later to study all this in detail ^^ |
| 18:35.36 | marbalon | cr2: still downloading snapshot... |
| 18:38.13 | infernixx | marbalon: do you use arm-2007q3-53-arm-none-eabi-i686-pc-linux-gnu for kernel compilation? |
| 18:39.07 | marbalon | yes |
| 18:42.20 | *** join/#htc-linux zyxell (n=John@chello089078117046.chello.pl) |
| 18:42.33 | zyxell | hi all |
| 18:45.15 | dcordes | marbalon: did you look at the SD patch I posted above? |
| 18:46.51 | marbalon | dcordes: this is your patch ? |
| 18:49.50 | dcordes | http://pastebin.ca/986236 yes but cr2 instructed |
| 18:53.10 | marbalon | I read it, but I don't know if it's correct on not |
| 18:53.54 | marbalon | no I have a problem witch compiling last snapshot |
| 18:53.57 | marbalon | "arch/arm/kernel/asm-offsets.c:1: error: bad value (armv5t) for -march= switch" |
| 18:54.34 | Raven_coda | arnv5t? |
| 18:54.39 | Raven_coda | *armv5t |
| 18:54.46 | marbalon | "cc1: error: unrecognized command line option "-mlittle-endian"" |
| 18:57.20 | marbalon | ok I fix it |
| 18:57.42 | BabelO | cr2: on kaizer wifi / sd is multiplexed like on artemis ? |
| 19:07.32 | dcordes | BabelO: there is one SD controller for SD card and one SD controller for wifi in kaiser |
| 19:07.38 | *** join/#htc-linux marbalon (n=balon@aefr28.neoplus.adsl.tpnet.pl) |
| 19:09.24 | BabelO | dcordes: but you set PHYS adress twice #define MSM_SDC1_PHYS 0xA0300000 so i don't understand |
| 19:12.13 | dcordes | BabelO: oh that's wrong. it should be 1=0xA0300000 and 2=0xA0400000 |
| 19:12.28 | dcordes | marbalon: did you see that? there's an arror in the patch |
| 19:13.38 | marbalon | I'm disconnected for a while, what are you talking about ? |
| 19:13.46 | marbalon | what patch ? |
| 19:14.52 | dcordes | marbalon: sd patch,112: "+#define MSM_SDC2_PHYS 0xA0300000" is wrong. should be ""+#define MSM_SDC2_PHYS 0xA0400000" |
| 19:18.31 | marbalon | looks more logical |
| 19:22.02 | goxboxlive | hi |
| 19:22.16 | goxboxlive | BabelO: any news about Qtopia 4.4? |
| 19:22.59 | BabelO | hi goxboxlive |
| 19:23.06 | goxboxlive | ola |
| 19:23.25 | BabelO | goxboxlive: no, but should be really soon ;) according to http://maemo.org/news/announcements/view/qt_to_be_supported_in_addition_to_gtk.html |
| 19:23.52 | BabelO | if there is an announce of official support of qt then it will be soon |
| 19:24.45 | goxboxlive | ok, good. |
| 19:25.03 | goxboxlive | BabelO: are you using your BA as main phone with QTopia now? |
| 19:25.33 | BabelO | goxboxlive: M works perfect now and my messenger app is ok :) i compile the second telepathy manager which have more feature |
| 19:26.05 | BabelO | goxboxlive: now, because i miss mixer phone and some strange at problem |
| 19:26.20 | BabelO | goxboxlive: but i think you can try image on your magician with out issue ;) |
| 19:26.26 | goxboxlive | good, i will try it out later :-) . I am busy with other stuff these days, also googling around for some hifi stuff. |
| 19:28.13 | BabelO | goxboxlive: ok, tell me whenyoutry |
| 19:28.22 | goxboxlive | yes i will |
| 19:28.26 | BabelO | goxboxlive: i ve posted image link to forum |
| 19:28.47 | goxboxlive | BabelO: ?? in the log you mean? |
| 19:29.00 | goxboxlive | Why dont u use htcpxa at linuxogo. |
| 19:29.09 | goxboxlive | U have the pass right? |
| 19:29.28 | BabelO | goxboxlive: no here http://forum.xda-developers.com/showthread.php?t=367866&page=2 |
| 19:29.43 | BabelO | goxboxlive: i use the linuxtogo again since i know it use sftp :) |
| 19:29.58 | BabelO | goxboxlive: and thanks for your email about doing .exe |
| 19:30.27 | goxboxlive | BabelO: autoinstalll is useless on BA because of wince |
| 19:30.39 | goxboxlive | you should rather use just the exe file, not cab |
| 19:30.51 | goxboxlive | ok |
| 19:31.04 | BabelO | goxboxlive: i just use for live ram disk |
| 19:31.12 | goxboxlive | right |
| 19:31.40 | BabelO | goxboxlive: good for people who only have m$ |
| 19:32.01 | goxboxlive | yes |
| 19:34.25 | goxboxlive | BabelO: this ones will blow out my windows when i fire up DIre straits :-) http://www.mamut.net/dynabel/subdet447.htm |
| 19:34.31 | goxboxlive | I only have to save some money :-) |
| 19:35.12 | kiozen | goxboxlive: I have these ones http://www.piega.ch/ |
| 19:35.51 | goxboxlive | kiozen: speakers right? |
| 19:36.12 | kiozen | yes |
| 19:36.18 | kiozen | and a NAD receiver |
| 19:36.33 | goxboxlive | kiozen: NAD is good. I have just build my own speakers. |
| 19:36.34 | kiozen | because you can control it 100% via RS232 |
| 19:36.52 | goxboxlive | kiozen: ok, do you use crestron? |
| 19:37.00 | BabelO | goxboxlive: i ve an old grundig amplifier from 1980 ... :) |
| 19:37.08 | kiozen | goxboxlive: ok, mine are too small to do them on my own |
| 19:37.24 | kiozen | I have to hide them under the ceiling |
| 19:37.54 | goxboxlive | BabelO: the old ones plays the best :-) Like old (i dont know the english word for non-transistor amps). |
| 19:37.59 | kiozen | I even got the official NAD spec. for the protocol ;) |
| 19:38.04 | goxboxlive | ok |
| 19:38.13 | kiozen | goxboxlive: tubes |
| 19:38.16 | goxboxlive | right |
| 19:38.21 | NeTTwerk | kiozen: I love my integra for that too.. they give you the RS232 protocol :) |
| 19:38.23 | BabelO | goxboxlive: yes that is what i have but only for preamp |
| 19:38.45 | goxboxlive | electrocompaniet is as close you can get to tubes says the known ones . |
| 19:39.46 | kiozen | NeTTwerk: well I had to beg a bit :) |
| 19:40.04 | NeTTwerk | kiozen: good job with the begging :) |
| 19:40.12 | kiozen | :)) |
| 19:43.27 | NeTTwerk | ugh. |
| 19:43.39 | NeTTwerk | how i hate that i forgot my nickserv password that i set 7 years ago.. |
| 19:43.41 | NeTTwerk | :( |
| 19:47.23 | *** join/#htc-linux JohnnyK (n=johnnyk@nfx-nat-229.pilsfree.net) |
| 19:47.35 | *** join/#htc-linux ltxda0 (n=ltxda@unaffiliated/ltxda) |
| 19:52.47 | *** join/#htc-linux paulproteus_ (n=paulprot@wide-rose.makesad.us) |
| 19:55.03 | *** join/#htc-linux SanMehat (n=san@nat/google/x-73ee779d892594c9) [NETSPLIT VICTIM] |
| 19:55.34 | *** join/#htc-linux hlbot (n=adm@iclem.net) [NETSPLIT VICTIM] |
| 19:59.09 | dcordes | marbalon: I'm getting rejects in mddi.c and msm_fb.c with your patchset |
| 19:59.41 | marbalon | yes, but it's simle to add it's manualy |
| 20:00.25 | dcordes | marbalon: could you give me both files? |
| 20:00.53 | marbalon | ok, |
| 20:02.43 | marbalon | http://www.baliniak.pl/~balon/android/ |
| 20:08.52 | marbalon | I have just compiled witch SDCC suport but comment out "msm_proc_comm" in vreg.c |
| 20:10.53 | BabelO | cr2: http://www.opersys.com/LTT/ |
| 20:11.11 | marbalon | dcordes: it is in smd.c ("CONFIG_MSM_SMD") but when compile with this option kernel don't start |
| 20:23.55 | dcordes | marbalon: thanks for the patched files. why do you need smd? |
| 20:24.51 | marbalon | it's needed to compile vreg.c |
| 20:26.42 | dcordes | marbalon: wait I came across this option.. |
| 20:27.35 | marbalon | no I recive "mmc: Transaction 0xc7..... time out" every few seconds |
| 20:28.00 | marbalon | no=now |
| 20:28.15 | dcordes | marbalon: how did you boot? |
| 20:28.52 | marbalon | like before from internal storage |
| 20:29.19 | dcordes | no I mean what did you do about smd/msm_proc_comm? |
| 20:30.50 | marbalon | comment out |
| 20:31.04 | marbalon | but it is not good idea... |
| 20:31.46 | dcordes | marbalon: I also had problems with msm_proc_comm: "arch/arm/mach-msm/vreg.c:85: undefined reference to `msm_proc_comm'" dzo said: Those errors are calls to the shared memory code and I disabled |
| 20:32.01 | dcordes | this since it doesn't work. Just change msm_proc_comm calls to do nothing or change config to include smem. |
| 20:32.52 | dcordes | so we don't need msm_proc_comm.. |
| 20:34.07 | *** join/#htc-linux dcordes_ (n=kaiser@f049190016.adsl.alicedsl.de) |
| 20:34.45 | marbalon | just comment 3 lines in vreg.c ?? (and return 0 function return int) |
| 20:37.47 | marbalon | dcordes: now I have a problem witch hangs after ~1min |
| 20:44.37 | dcordes_ | marbalon: I don't know if you can comment them. dzo just said make msm_proc_comm do nothing |
| 20:44.50 | dcordes_ | SanMehat: maybe you can help us here? |
| 20:45.39 | dcordes_ | marbalon: can you write data to the sds? |
| 20:48.31 | marbalon | dcordes_: no, gets only info transaction timeout |
| 20:49.20 | marbalon | from msm_sdcc.c -> msmsdcc_transaction_expired() |
| 20:51.22 | dcordes_ | marbalon: did you do anything else than patch my diff? |
| 20:51.44 | SanMehat | marbalon: Does the 'irqlog' that gets displayed show anything? |
| 20:52.55 | marbalon | dcordes_: I didn't aply you patch, when I change address gets an oops |
| 20:53.24 | marbalon | SanMehat: moment, recompile kernel witch this option |
| 20:54.43 | *** join/#htc-linux NickBee (n=pocketir@117.96.73.159) |
| 20:57.49 | marbalon | SanMehat: hmm, show "IrqCnt: 0", maybe wrong IRQ |
| 20:59.50 | dcordes_ | marbalon: according to http://wiki.xda-developers.com/index.php?pagename=Kaiser_IRQ irq must be something between 24-27 |
| 21:00.15 | SanMehat | marablon: perhaps.. sounds like you're not getting any device interrupts |
| 21:03.21 | marbalon | I try this tomorrow, now I give up, go sleep |
| 21:03.42 | SanMehat | night |
| 21:04.39 | *** join/#htc-linux patoche (n=root@lns-bzn-33-82-252-3-134.adsl.proxad.net) |
| 21:07.25 | cr2 | dcordes_: this table is mostly copied from the adroid source. |
| 21:07.47 | cr2 | dcordes_: the problem is that you could not trace the SD on kaiser. |
| 21:07.55 | cr2 | and we still don't know why. |
| 21:08.03 | cr2 | there will be the same problem with MDP |
| 21:19.05 | dcordes_ | cr2: so you think what marbalon faces is related to the wrong irq/ unability to access it? |
| 21:21.58 | BabelO | cr2: it is like if some power gpio are missing too :) have same thing a month ago on omap850 |
| 21:23.13 | infernix | dcordes_: http://git.android.com/?p=linux-msm.git;a=commit;h=383dacbcca52eb2b305e60170e85304cd8a76c55 |
| 21:23.17 | BabelO | have to try android image on artemis too |
| 21:23.52 | infernix | this is the SD driver that you're trying to get working on kaiser? |
| 21:24.10 | dcordes_ | nods |
| 21:24.39 | dcordes_ | more important are the other files that define the registers and device numbers as I gathered |
| 21:26.31 | BabelO | pH5: still around ? ;) |
| 21:26.51 | dcordes_ | looking at both msm_sdcc.c and header I think we need to remove controllers 3 and 4 out of those, too. |
| 21:29.35 | dcordes_ | infernix: Ãin case you are interested look at http://pastebin.ca/986522, remove msm_proc_comm in vreg.c and look at msm_sdcc.c and h |
| 21:33.49 | Robert__ | pH5: back again. did you find out what's the fault on the himalaya usb problem? |
| 21:34.34 | *** join/#htc-linux camgirl29 (n=camgirl2@d033.dhcp212-198-248.noos.fr) |
| 21:43.09 | cr2 | Robert__: puen is gpio60 |
| 21:43.11 | pH5 | Robert__: yes, it looks like the udc code was copied from blueangel, and it touches the wrong gpio. |
| 21:43.21 | cr2 | :) |
| 21:43.23 | pH5 | cr2: timing :) |
| 21:43.29 | pH5 | BabelO: yes |
| 21:43.51 | BabelO | pH5: did you look at my acx patch ? |
| 21:44.08 | BabelO | pH5: and have to look at sound recording now |
| 21:44.33 | Robert__ | pH5: ok, thanks. but what to change? :) |
| 21:44.34 | BabelO | pH5: on BA with have already a driver that record sound, so if i understand this soc pai |
| 21:45.58 | BabelO | pH5: and final question, did you notice that now we are not able to switch off w100fb by hand ? |
| 21:46.06 | pH5 | Robert__: you have to edit the himalaya_udc.c file. find the udc_command function. there are two calls asic3_gpio_set_value(GPIO_USB_PUEN, ...) |
| 21:47.59 | Robert__ | and just s/GPIOA_USB_PUEN/GPIOA_USB_GPIO60 ? |
| 21:48.08 | pH5 | BabelO: no, I applied the mac802.11 patch to the mobile-linux hh.org tree, couldn't figure out where to put your modified acx driver and promptly forgot about it :/ |
| 21:48.42 | pH5 | Robert__: close |
| 21:48.45 | pH5 | s/asic3_gpio_set_value(asic3_dev,GPIO_USB_PUEN/gpio_set_value(GPIO_NR_HIMALAYA_USB_PULLUP_N/ |
| 21:50.12 | BabelO | pH5: just unpack mac80211 into drivers/net/wireless |
| 21:50.33 | BabelO | pH5: i do that to keep actual acx driver |
| 21:50.36 | Robert__ | pH5: with the "asic3_dev" you mean? |
| 21:50.47 | pH5 | BabelO: with uda1380 currently I'm still fighting with the basic clock setup on 2.6.25-rc8, the asoc driver is ported over and compiles, but the sound card isn't enumerated with alsa for whatever reason |
| 21:51.05 | pH5 | Robert__: sorry, you have to drop the asic3_dev |
| 21:51.09 | BabelO | ok |
| 21:51.15 | pH5 | gpio_set_value only takes two parameters (gpio and value) |
| 21:51.48 | Robert__ | ah okay, didnt read that the function name changed too |
| 21:51.48 | pH5 | BabelO: thus just overwriting the original acx driver in the kernel tree? |
| 21:52.15 | pH5 | BabelO: what do you mean by switch off w100fb by hand? |
| 21:52.29 | pH5 | console blanking? |
| 21:52.56 | BabelO | pH5: complete LCD off, over/sys i m no more able to do it |
| 21:53.20 | BabelO | pH5: no it not override current acx, but just allow another choice |
| 21:59.20 | pH5 | BabelO: I don't get it, sorry. Where is that mac80211 directory sourced? It doesn't even exist in my tree. |
| 21:59.43 | pH5 | Should that strange mac80211 patchscript have created drivers/net/wireless/mac80211? |
| 21:59.49 | pH5 | It didn't here :/ |
| 22:00.13 | BabelO | pH5: no, i send you a tar.gz file which contain the mac80211 directory |
| 22:01.49 | pH5 | I know, so I just add source 80211 to drivers/net/wireless/Kconfig? |
| 22:01.56 | pH5 | s/80211/mac80211/ |
| 22:02.09 | pH5 | I thought I was missing something |
| 22:02.44 | BabelO | pH5: yes |
| 22:02.50 | Robert__ | pH5: ah, fine. now my host alt least lists the usb device again |
| 22:02.59 | BabelO | i just add parenthesis mac80211 :) |
| 22:07.09 | pH5 | ah ok, now I have the ACX configuration options, and I see htcblueangel_acx is hardwired, even :) |
| 22:08.59 | BabelO | pH5: no it is just a test the htcblueangel_acx |
| 22:09.05 | BabelO | i take an old file |
| 22:09.26 | BabelO | once main acx is ok for device like hx4700 and htc universal |
| 22:09.34 | BabelO | i ll merge with cs.c |
| 22:10.03 | pH5 | BabelO: ok |
| 22:10.29 | *** join/#htc-linux surgex0 (i=surge@pool-71-126-14-103.bflony.east.verizon.net) |
| 22:11.10 | pH5 | so basically the mac80211/acx_mem should work together with the hx4700_acx power/setup module? |
| 22:11.24 | BabelO | pH5: yes |
| 22:12.14 | BabelO | pH5: it seem that mac80211 just replace the acx_t structure by the iee82011_t strucure |
| 22:12.54 | pH5 | great, thanks. seems to be compiling. I'll test tomorrow. |
| 22:13.08 | BabelO | pH5: ok |
| 22:13.10 | pH5 | good night |
| 22:13.17 | BabelO | i ll look at uda1380 tomorrow too |
| 22:13.20 | BabelO | good night |
| 22:14.39 | BabelO | Robert__: did your lcd work ? |
| 22:17.13 | Robert__ | BabelO: yes, but only with a console at the moment |
| 22:18.06 | BabelO | Robert__: ok good, i think my bluenagel image can work on hima too |
| 22:19.43 | Robert__ | kernel image, or initrd? |
| 22:20.54 | BabelO | Robert__: rootfs image, no initrd |
| 22:21.02 | BabelO | Robert__: i boot from sd directly |
| 22:22.13 | Robert__ | I'm trying this at the moment, but my mmc-card is not recognized |
| 22:22.52 | BabelO | Robert__: add rootdelay=2 to command line |
| 22:23.22 | cr2 | Robert__: should be working. |
| 22:24.19 | Robert__ | root=/dev/mmc/blk0/part1 should be the first partition on the mmc card, right? |
| 22:24.55 | BabelO | Robert__: root=/dev/mmcblk0p1 rootdelay=2 |
| 22:25.19 | cr2 | Robert__: it's an obsolete syntax. |
| 22:26.03 | BabelO | cr2: is modem the same on hima ? |
| 22:26.53 | Robert__ | BabelO: where can I get your image? I think my rootfs is pretty old, too |
| 22:27.52 | BabelO | Robert__: http://linuxtogo.org/~htcpxa/htcblueangel/Qtopia/ |
| 22:28.08 | BabelO | Robert__: the bz2 file is ok |
| 22:28.31 | BabelO | Robert__: youcan remove /opt at the moment |
| 22:28.49 | Robert__ | ok thanks, I will give it a try |
| 22:28.57 | BabelO | Robert__: other thing, check you have eabi activated in kernel |
| 22:29.08 | cr2 | BabelO: yes, but there are some gpio differences |
| 22:29.17 | Robert__ | hmm, the partition table on my card is not recognized: "unknown partition table" |
| 22:30.04 | BabelO | Robert__: that is good, so card is detected with the rootdelay=2 parameter |
| 22:30.17 | Robert__ | so there is just a "mmcblk0", no "p1" |
| 22:30.33 | Robert__ | yes, card seems to be detected. but no partition |
| 22:30.50 | BabelO | Robert__: check with linux fdisk |
| 22:32.13 | Robert__ | BabelO: I created two partitions. first is type 83, second vfat |
| 22:32.39 | Robert__ | do I need stuff from "Advanced partition selection" in kernel? |
| 22:32.49 | BabelO | Robert__: so it seem ok |
| 22:33.19 | BabelO | Robert__: you just need ext3 if you use mkfs.ext3 |
| 22:34.08 | Robert__ | yes, I did compile that in |
| 22:35.12 | BabelO | Robert__: before the message "unknown partition table" you should see size card detection follower by : px |
| 22:38.10 | dcordes_ | bye |
| 22:38.48 | infernix | dcordes_: bye :) will look at SD later |
| 22:39.54 | Robert__ | BabelO: I see the cardsize, yes. but no "px" |
| 22:40.20 | Robert__ | "mmcblk0:<4>asic3_mmc: Spurious data irq" |
| 22:40.27 | Robert__ | then "unknown partition tyble" |
| 22:40.53 | BabelO | Robert__: ah ok i see something for cr2 :) |
| 22:41.12 | BabelO | maybe the card detection / irq |
| 22:41.30 | BabelO | ~ping cr2 |
| 22:41.31 | apt | pong cr2 |
| 22:43.04 | BabelO | Robert__: i look in my kernel tree |
| 22:45.49 | BabelO | Robert__: do i miss something ? my hyma directory is empty |
| 22:46.52 | Robert__ | BabelO: in arch/arm/mach-pxa/htchimalaya ? |
| 22:47.19 | BabelO | yes |
| 22:47.53 | BabelO | ah sorry |
| 22:48.01 | BabelO | now i have htchimalaya |
| 22:48.58 | infernix | are there drivers for the rom where the OS is stored on WM HTC phones and the flash which contains the user data? |
| 22:49.25 | infernix | or to put it differently, what are the chances of corrupting that data when playing with the linux-msm kernel? |
| 22:50.13 | infernix | i know haret loads it in ram and uses root in initrd hence in ram, but im wondering whether if playing with the SD driver on Kaiser might break the WM OS data |
| 22:50.31 | infernix | or are there no drivers yet for that part of the phones? |
| 22:51.01 | BabelO | infernix it seem your phone use nand driver |
| 22:51.16 | infernix | MTD? |
| 22:51.25 | BabelO | infernix yes in mtd |
| 22:51.31 | infernix | alright |
| 22:52.15 | BabelO | infernix for the sd driver don't think you broke something , only your sdcard can be corrupted |
| 22:52.33 | infernix | yeah, ill get a new one this week for testing |
| 22:52.50 | Robert__ | how big can an initrd image be on himalaya? |
| 22:53.50 | cr2 | infernix: what does SD have to do with wince ? |
| 22:54.03 | infernix | i think its total ram - (fbdev ram + kernel size + 2 x initrd) but im just guessing |
| 22:54.28 | infernix | cr2: nothing but i was just wondering what device driver could talk to the built-in flash ram |
| 22:54.31 | cr2 | BabelO: i could boot with this kernel from SD. |
| 22:54.43 | cr2 | infernix: it's the NAND driver |
| 22:55.00 | BabelO | Robert__: someone already boot inird up to 24Mb and more ;) |
| 22:55.18 | infernix | i just don't want to corrupt the WM flash whilst playing with linux, thats all |
| 22:55.43 | Robert__ | hmm ok too small to put GPE or so in it |
| 22:55.53 | infernix | busybox fits |
| 22:56.09 | infernix | or should, i think |
| 22:56.42 | BabelO | Robert__: w<e can to a lite image |
| 22:57.10 | Robert__ | I have another strange problem now: I could easily ssh into my running initrd while running a patched 2.6.12 |
| 22:57.14 | cr2 | Robert__: btw, the mdoc on hima is supported by linux. |
| 22:57.30 | cr2 | it's the only device where it's supported :) |
| 22:57.43 | cr2 | but we need some glue code to support it. |
| 22:58.05 | Robert__ | now I got 2.6.21 from hh.org running, but cannot ssh in anymore. the connection is closed directly after password propt |
| 22:58.10 | Robert__ | root@192.168.2.2's password: |
| 22:58.10 | Robert__ | Connection to 192.168.2.2 closed by remote host. |
| 22:58.10 | Robert__ | Connection to 192.168.2.2 closed. |
| 22:58.53 | Robert__ | I think I misconfigured something in the kernel, any ideas? |
| 22:59.04 | infernix | i doubt that thats kernel related |
| 22:59.55 | Robert__ | but I can ssh into the same initrd when running the old kernel |
| 23:00.05 | Robert__ | cr2: what's mdoc? |
| 23:00.33 | cr2 | m-systems DiskOnChip. it's a NAND flash chip. |
| 23:00.49 | Robert__ | the "ramdisk" under WM? |
| 23:01.09 | BabelO | Robert__: i had same before on artemis, it was related to bad udb udc settings |
| 23:01.55 | Robert__ | BabelO: what did you change? |
| 23:05.11 | BabelO | Robert__: don't remember sorry, just remember it was udc |
| 23:06.09 | Robert__ | BabelO: could my "unknown partition type" problem be caused by a "bad" mmc card? |
| 23:06.23 | Robert__ | I read somewhere that not all cards seem to be supported |
| 23:06.30 | Robert__ | escpecially those >1GB |
| 23:09.00 | cr2 | with the 2.6.12 kernel |
| 23:09.35 | cr2 | good night |
| 23:13.29 | BabelO | good night |
| 23:14.26 | BabelO | Robert__: we can loo, more tomorrow, best is to boot over nfs and check |
| 23:28.37 | *** join/#htc-linux TimRiker (n=timr@pdpc/supporter/bronze/TimRiker) |
| 23:28.45 | *** join/#htc-linux ltxda (n=ltxda@c-98-196-125-205.hsd1.tx.comcast.net) |