| 00:29.09 | *** join/#htc-linux jott_ (n=j@unaffiliated/jott) |
| 00:51.11 | *** join/#htc-linux huhlig (n=UhligH@c-76-20-46-192.hsd1.ca.comcast.net) |
| 02:54.23 | *** join/#htc-linux UhligH_ (n=UhligH@c-76-20-46-192.hsd1.ca.comcast.net) |
| 03:11.17 | *** join/#htc-linux AC_Mast (i=s@gateway/tor/x-3ea360a8819ec796) |
| 03:31.09 | *** join/#htc-linux lkthomas (n=lkthomas@202.85.228.3) |
| 03:31.12 | lkthomas | hey guys |
| 03:31.31 | lkthomas | I found issue with SPB time + wm6 |
| 03:31.44 | lkthomas | what alarm program are you guys using ? |
| 04:28.28 | *** join/#htc-linux AC_Mast95 (i=s@gateway/tor/x-434e4ae2c8781626) |
| 05:02.06 | *** join/#htc-linux psokolovsky (n=psokolov@82.193.99.25) |
| 05:17.18 | *** join/#htc-linux pleemans (n=peter@leemanpe.ugent.be) |
| 05:37.18 | *** join/#htc-linux ltxda2 (n=anon@c-98-196-125-205.hsd1.tx.comcast.net) |
| 05:46.50 | *** join/#htc-linux _law_ (n=law@mail.stiftadmont.at) |
| 06:52.22 | *** join/#htc-linux IBG (n=IBG@Zdd83.z.pppool.de) |
| 07:44.38 | *** join/#htc-linux snua12 (n=admin@113-70-207-85.strcechy.adsl-llu.static.bluetone.cz) |
| 07:53.48 | *** join/#htc-linux rob_w (n=bob@M958f.m.pppool.de) |
| 08:35.01 | *** join/#htc-linux DTMonterrey (n=evandro@cornelius.estig.ipb.pt) |
| 09:27.11 | cr2_ | Kevin2: i'll find out the GPIO base and layout for qualcomm cpu, but we may also try to ask qualcomm politely about the datasheet. with AMD having released the Radeon register datasheets we may also ask AMD about Imageon :) |
| 09:36.25 | *** join/#htc-linux kiozen (n=oeichler@p54922C35.dip0.t-ipconnect.de) |
| 10:19.26 | *** join/#htc-linux psokolovsky (n=psokolov@82.193.99.25) |
| 10:52.12 | *** join/#htc-linux IBG (n=IBG@Xcfe5.x.pppool.de) |
| 11:19.51 | *** join/#htc-linux DTMonterrey (n=evandro@cornelius.estig.ipb.pt) |
| 11:48.11 | *** join/#htc-linux psokolovsky (n=psokolov@stingy.earner.volia.net) |
| 11:53.07 | *** join/#htc-linux kiozen (n=oeichler@p54922C35.dip0.t-ipconnect.de) |
| 11:56.55 | *** join/#htc-linux IBG (n=IBG@Xcfe5.x.pppool.de) |
| 12:26.21 | *** join/#htc-linux hlbot87 (n=adm@iclem.net) |
| 13:10.51 | *** join/#htc-linux dcordes (n=tsingtao@e179110011.adsl.alicedsl.de) |
| 13:56.37 | dcordes | hi |
| 14:39.44 | *** join/#htc-linux Beg (n=beg@82.138.51.4) |
| 14:48.36 | *** join/#htc-linux robotician (n=dale@usr016.bb275-03.udp.im.wakwak.ne.jp) |
| 15:03.53 | *** join/#htc-linux snua12 (n=admin@113-70-207-85.strcechy.adsl-llu.static.bluetone.cz) |
| 15:15.04 | *** join/#htc-linux BoSJo|zzzZZZzzz (n=bo@104.80-203-97.nextgentel.com) |
| 15:15.15 | dcordes | cr2_: how's the titan progress? |
| 15:20.22 | cr2_ | dcordes: ask qualcomm for the cpu manual :-) |
| 15:30.26 | dcordes | cr2_: is it a new architecture type? |
| 15:30.35 | dcordes | no other info available? |
| 15:39.47 | cr2_ | no. |
| 15:51.36 | *** join/#htc-linux robotician (n=dale@usr016.bb275-03.udp.im.wakwak.ne.jp) |
| 16:04.22 | *** join/#htc-linux IBG (n=IBG@Xcfe5.x.pppool.de) |
| 16:18.10 | *** join/#htc-linux IBG_ (n=IBG@Xcfe5.x.pppool.de) |
| 16:19.48 | *** join/#htc-linux scorpio16v (n=scorpio1@78.52.219.35) |
| 16:43.05 | *** join/#htc-linux dcordes (n=tsingtao@f048016237.adsl.alicedsl.de) |
| 16:45.50 | *** join/#htc-linux Othello (i=nobody@gateway/tor/x-5fc090dfa00e0a80) |
| 16:46.00 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 17:00.56 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 17:02.37 | *** join/#htc-linux mianos_food (n=mianos2k@tmo-097-2.customers.d1-online.com) |
| 17:02.45 | *** join/#htc-linux ImCoKeMaN (n=me@rrcs-67-78-122-67.sw.biz.rr.com) |
| 17:04.59 | dcordes | cr2_: I will ask qualcom |
| 17:05.16 | *** join/#htc-linux mianos_food (n=mianos2k@tmo-097-2.customers.d1-online.com) |
| 17:08.33 | dcordes | :) |
| 17:18.37 | *** join/#htc-linux AC_Mast39 (i=s@gateway/tor/x-1ec78d02d6e3c494) |
| 17:20.27 | *** join/#htc-linux rmoravcik (n=rmoravci@ip-89-103-152-149.karneval.cz) |
| 17:31.50 | *** join/#htc-linux snua12 (n=admin@113-70-207-85.strcechy.adsl-llu.static.bluetone.cz) |
| 17:44.48 | *** join/#htc-linux snua12 (n=admin@113-70-207-85.strcechy.adsl-llu.static.bluetone.cz) |
| 17:50.41 | *** join/#htc-linux pH5 (n=ph5@e178221042.adsl.alicedsl.de) |
| 17:52.37 | dcordes | yo pH5 |
| 17:55.15 | pH5 | how are you gentlemen |
| 18:00.05 | *** join/#htc-linux TimRiker (n=timr@216.49.181.128) |
| 18:00.11 | dcordes | I'm fine, thanks. What about you? |
| 18:05.54 | *** join/#htc-linux goxboxlive (n=goxboxli@139.80-202-160.nextgentel.com) |
| 18:06.46 | goxboxlive | hi |
| 18:12.14 | pH5 | dcordes: fine, thanks |
| 18:12.15 | pH5 | hi goxboxlive |
| 18:16.15 | goxboxlive | hi pH5 |
| 18:36.13 | *** part/#htc-linux scorpio16v (n=scorpio1@78.52.219.35) |
| 18:52.48 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 19:09.48 | *** join/#htc-linux ipaq_rx_5720 (n=root@d91-128-234-105.cust.tele2.at) |
| 19:10.02 | ipaq_rx_5720 | hi kevin2 |
| 19:10.14 | ipaq_rx_5720 | someone of the familiar channel referred to you.. |
| 19:10.47 | ipaq_rx_5720 | i have a problem, as i'm using a rx5720 travel companion, haret didn't work correctly in the past |
| 19:11.19 | ipaq_rx_5720 | it has a s3c2442 processor in it, i don't know the other hardware specs |
| 19:11.39 | ipaq_rx_5720 | can i use your sources, and if yes; where are they? |
| 19:11.53 | pH5 | ipaq_rx_5720: the sources are in handhelds.org cvs |
| 19:12.17 | ipaq_rx_5720 | okay.. have they been tested with other travel companions or am i the first? |
| 19:12.51 | cr2_ | ipaq_rx_5720: can you post the earlyharetlog.txt ? |
| 19:12.57 | pH5 | the first, as far as I know. but it is known to work well with other s3c2442 based devices |
| 19:13.24 | pH5 | hi cr2_ |
| 19:13.29 | cr2_ | hi pH5 |
| 19:13.48 | ipaq_rx_5720 | no i'm sorry, i did not really work as i tried it a few weeks ago |
| 19:13.57 | ipaq_rx_5720 | i'm trying right now |
| 19:14.23 | cr2_ | ipaq_rx_5720: ok, that's the first thing to do on a new device. |
| 19:17.47 | cr2_ | pH5: what came out of the moko GPS ? |
| 19:18.41 | pH5 | cr2_: nothing yet. we're still stuck in the final locking phase. |
| 19:21.52 | cr2_ | do you already have the software to calculate XYZ from the pseudoranges/phases ? |
| 19:22.24 | pH5 | I don't think so. |
| 19:23.13 | cr2_ | i've stumbled over http://precision-gps.org, it does not look very professional, but obviously has managed to do the trick ? |
| 19:23.32 | cr2_ | hm. http://precision-gps.org |
| 19:24.03 | cr2_ | works only on windows, but it should not be very difficult to port it. |
| 19:25.03 | pH5 | nice, but I won't even start to think about that until I've got a stable lock on a single PRN :) |
| 19:25.39 | cr2_ | hehe. i don't want to buy 2 LEA-4T receivers, will prefer sirf2. no words about it in the docs. |
| 19:25.43 | cr2_ | ok. |
| 19:26.01 | BabelO | hi cr2_ ,pH5 |
| 19:26.12 | cr2_ | hmm. maybe i should check the sable again. |
| 19:26.12 | pH5 | hi BabelO |
| 19:26.29 | cr2_ | BabelO: hi. can you tell me about the BA status ? |
| 19:26.39 | BabelO | cr2_: i take a look at dgpsip this afternoon |
| 19:27.30 | BabelO | cr2_: BA status... hmm. last time, i ve made a patch for ds1wm and leds using pH5 driver for aic2/3 |
| 19:27.40 | BabelO | but still have issue with that |
| 19:28.00 | BabelO | maybe a bad clock, only this is missing now and camera too, but another thing ;) |
| 19:28.14 | *** join/#htc-linux flintux (n=flintux@dhcp-83-219-109-45.customers.tvtnet.ch) |
| 19:28.18 | cr2_ | ok. i'd like to check ba again. |
| 19:28.24 | pH5 | BabelO: and omap? |
| 19:28.53 | pH5 | I still don't have a clue how to get I2C to work. this hangup issue really puts a dent in my motivation :( |
| 19:29.15 | cr2_ | pH5: can we create a omap850 register map in wiki ? |
| 19:29.15 | BabelO | pH5: i disassemble some dll and look for our clock register, because it seem i enable to many thing in clock.h |
| 19:29.52 | BabelO | pH5: i ve to try to desactivate all clock and just keep usb and remove dsp code |
| 19:30.04 | pH5 | BabelO: ok, great |
| 19:30.10 | BabelO | problem appear from that point |
| 19:30.41 | ipaq_rx_5720 | pH5: so i ran haret sept. 13th and the result is again a screen full of dots, i am resetting in the moment to view the haretlog |
| 19:30.42 | pH5 | cr2_: sure. |
| 19:33.01 | cr2_ | i don't have omap850, but it can be helpful to look at. |
| 19:33.21 | pH5 | cr2_: currently I'm building three such lists anyway |
| 19:33.32 | flintux | hi all |
| 19:33.44 | pH5 | (haret, disassemble.py, devmem2) |
| 19:33.50 | pH5 | hi flintux |
| 19:33.59 | ipaq_rx_5720 | so what next? |
| 19:34.07 | flintux | hi ph5 |
| 19:34.07 | pH5 | ipaq_rx_5720: pastebin the log |
| 19:34.15 | flintux | many thanks for your links of 2 days ago |
| 19:34.20 | ipaq_rx_5720 | the log is very long? |
| 19:34.27 | flintux | I have tried now and it boots, but touchscreen seems not to work |
| 19:34.30 | pH5 | ~pastebin |
| 19:34.30 | apt | methinks pastebin is a place to paste your stuff without flooding the channel - try http://pastebin.ca, or http://channels.debian.net/paste, or http://rafb.net/paste/, or http://pastebin.com is usually painfully too slow and unresponsive to use, use one of the other pastebin sites, or dpaste.com is a very nice pastebin as well |
| 19:35.43 | *** join/#htc-linux JBerlinsky (n=Owner@pool-71-187-170-147.nwrknj.fios.verizon.net) |
| 19:35.44 | cr2_ | pH5: that's good. let me know when something ready to be edited is available |
| 19:36.06 | pH5 | cr2_: ok, will do |
| 19:36.58 | cr2_ | pH5: the wince static table is not so extensive like on qualcomm. |
| 19:37.12 | cr2_ | do you know what is at 0x04000000 ? |
| 19:37.41 | ipaq_rx_5720 | pH5: http://pastebin.ca/696206 |
| 19:37.48 | cr2_ | because the wince kernel starts by writing 0x40 there :) |
| 19:38.23 | *** part/#htc-linux JBerlinsky (n=Owner@pool-71-187-170-147.nwrknj.fios.verizon.net) |
| 19:38.23 | pH5 | cr2_: I don't know. debug board? |
| 19:38.26 | cr2_ | heh. something new machine (Plat='PocketPC' OEM='Hewlett-Packard Company') |
| 19:38.30 | cr2_ | pH5: maybe. |
| 19:39.05 | cr2_ | Hewlett-Packard Company is not very useful as a device ID ;-) |
| 19:39.21 | cr2_ | lol. |
| 19:39.22 | BabelO | cr2_: this adress is on omap850 ? |
| 19:39.24 | cr2_ | vend=Smasung Electronics |
| 19:39.28 | cr2_ | BabelO: yes. |
| 19:39.30 | flintux | pH5: I followed your instructions http://linuxtogo.org/~ph5/magician/README then my magician boots and I get the calibration screen but t seems , but it seems touchscreen doesn't work, could you please help e? |
| 19:39.35 | BabelO | cr2_: do you want to play on my device with haret ? |
| 19:39.41 | pH5 | ipaq_rx_5720: so haret did everything alright, the problem probably is your kernel. |
| 19:40.05 | cr2_ | BabelO: not really. i need to get a better idea about the register layout first. |
| 19:40.09 | pH5 | flintux: can you connect to it via usbnet? |
| 19:40.15 | ipaq_rx_5720 | mhm, and how can i solve the problem right now |
| 19:40.23 | ipaq_rx_5720 | are there any precompiled ones? |
| 19:40.34 | flintux | pH5: how should I do that? |
| 19:40.50 | ipaq_rx_5720 | as far as i know, nobody on familiar uses an rx_5720 |
| 19:40.51 | cr2_ | ipaq_rx_5720: can you register your device on linux.org.uk ? or is it already registered ? |
| 19:41.19 | pH5 | ipaq_rx_5720: mtype 592 is rx3715, why do you think that kernel should work on the rx5720? |
| 19:42.28 | ipaq_rx_5720 | i thought because they are on the same product line |
| 19:42.57 | ipaq_rx_5720 | only the 3715 has wifi and the 5720 has gps in it |
| 19:43.15 | pH5 | flintux: load cdc_ether and usbnet modules, connect via usb and try if you can ifconfig usb0 up. |
| 19:43.46 | pH5 | ipaq_rx_5720: ah, ok. I don't know those devices. if they are indeed the same model with small modifications, it could work. |
| 19:43.51 | pH5 | strange naming, though. |
| 19:43.53 | flintux | pH5: I will try it now |
| 19:44.54 | ipaq_rx_5720 | the processor is the same, i don't know anything about the other hardware |
| 19:45.04 | ipaq_rx_5720 | i'm informing myself in wikipedia... |
| 19:45.08 | pH5 | cr2_: I'm quite sure 0x4000000 is related to htc's debug board |
| 19:45.30 | cr2_ | ipaq_rx_5720: Video Phys FB=30100000. Seems to be in RAM, so you are probably using the builtin LCD controller. |
| 19:45.38 | pH5 | the herald spl starts by writing 1,2,3,4,5 and 6 during the first steps to this address. |
| 19:45.46 | ipaq_rx_5720 | that might be |
| 19:45.51 | cr2_ | ipaq_rx_5720: you need to trace the gpio anyway. |
| 19:45.57 | cr2_ | pH5: agreed. |
| 19:46.03 | ipaq_rx_5720 | what does that mean? |
| 19:46.49 | pH5 | ipaq_rx_5720: those cpus have a big number of gpios (general purpose input/output) |
| 19:47.07 | pH5 | those can be connected to anything, and it's usually different on every new device. |
| 19:47.48 | pH5 | first steps when porting linux to a new wince device are always tracing those gpios with haret to see what is connected where. |
| 19:48.03 | cr2_ | ipaq_rx_5720: can you try to run testwm5.exe ? |
| 19:48.21 | ipaq_rx_5720 | where? on the handheld? |
| 19:48.33 | cr2_ | pH5: we need to write a memo for hacking a new device :-) |
| 19:48.37 | cr2_ | ipaq_rx_5720: yes. |
| 19:50.00 | pH5 | cr2_: definitely. but where to take the time? |
| 19:50.22 | ipaq_rx_5720 | cr2_: can't find it anywhere |
| 19:50.39 | cr2_ | pH5: true. but we loose this time by explaining these thing over and over again... |
| 19:50.58 | cr2_ | hands.com/~lkcl ? |
| 19:51.09 | cr2_ | http://hands.com/~lkcl |
| 19:52.41 | ipaq_rx_5720 | cr2_: can't find it anywhere |
| 19:54.20 | cr2_ | http://hands.com/~lkcl/TestWM5.exe |
| 19:56.05 | *** join/#htc-linux snua12 (n=snua12@113-70-207-85.strcechy.adsl-llu.static.bluetone.cz) |
| 19:58.10 | flintux | pH5: I tried but apparently I don't have a usb0 device |
| 19:58.56 | cr2_ | flintux: lsusb ? |
| 20:00.07 | *** join/#htc-linux Hawk|- (n=Hawk@p5B17C54C.dip0.t-ipconnect.de) |
| 20:02.24 | flintux | Bus 002 Device 002: ID 0bb4:0a07 High Tech Computer Corp. |
| 20:03.07 | flintux | actually when I connected it detected a PocketPC PDA and attached it to ttyUSB0 |
| 20:03.20 | flintux | but this is only serial and not ethernet |
| 20:03.26 | pH5 | flintux: but it's not running linux alright |
| 20:03.49 | flintux | it is loading, but then whenI get the touchscreen I cannot calibrate it |
| 20:04.12 | flintux | then I can go further, but when I need to enter username and password I cannot enter anything since touchscreen doesn't work |
| 20:04.17 | ipaq_rx_5720 | cr2_: and what shall i do then, upload to xdadevelopers? |
| 20:04.27 | pH5 | I understand. But while it is running linux, you get the 0bb4:0a07 in lsusb? |
| 20:04.38 | ipaq_rx_5720 | everything zipped or only a few files? |
| 20:05.24 | cr2_ | ipaq_rx_5720: upload somewhere where one can get it. the most interesting is nk.exe and hw-related *.dll files. |
| 20:05.29 | cr2_ | pH5: http://wiki.xda-developers.com/index.php?pagename=ProphetMemoryMap |
| 20:05.41 | cr2_ | pH5: looks familiar ? |
| 20:06.00 | flintux | lsusb |
| 20:06.20 | flintux | ph5: no not when it is running linux :-( |
| 20:07.15 | BabelO | cr2_: i send you a short email with basic register adress |
| 20:07.48 | pH5 | cr2_: familiar, but not the same |
| 20:07.54 | flintux | I cannot clibrate the touchscreen and then I cannot enter any dtails in the "New user details" and once linux boots it disconnects it from myx computer |
| 20:07.54 | cr2_ | BabelO: ok. do you know the map for artemis ? |
| 20:08.03 | pH5 | oh, strike that |
| 20:08.16 | pH5 | I just have multiple mappings to the same phys? |
| 20:08.17 | ipaq_rx_5720 | cr2_: what do you mean ".. with the hw-related .dlls"? |
| 20:08.21 | BabelO | i have already a dump mmu somewhere |
| 20:08.36 | ipaq_rx_5720 | hardware dlls? |
| 20:08.43 | pH5 | sram (fb) is both at 9... and b... here, for example |
| 20:10.00 | cr2_ | 9==b, 8==a |
| 20:10.12 | cr2_ | ipaq_rx_5720: yes |
| 20:10.30 | cr2_ | pH5: cached vs. uncached cpu access |
| 20:10.57 | pH5 | right, forgot about that |
| 20:11.13 | cr2_ | BabelO: not the mmu dump, but the static wince mapping. it's at the beginning of the nk.exe |
| 20:11.51 | flintux | pH5: is it the kernel or the gpe that handles the touchscreen? |
| 20:12.08 | BabelO | cr2_: mine http://pastebin.ca/696243 |
| 20:12.13 | BabelO | sorry :( |
| 20:12.29 | BabelO | ok i ll look |
| 20:13.06 | cr2_ | b8400000 | 06000000 | 1MB section | D=0 AP=1 |
| 20:13.07 | cr2_ | b8500000 | 40000000 | 1MB section | D=0 AP=1 |
| 20:13.07 | cr2_ | b8600000 | 08000000 | 1MB section | D=0 AP=1 |
| 20:13.47 | cr2_ | looks similar. the 0x08000000 is the same as on tornado. but not on prophet. |
| 20:14.00 | pH5 | is prophet omap730? |
| 20:14.06 | cr2_ | 850 |
| 20:14.13 | cr2_ | only typhoon is 730 |
| 20:14.28 | cr2_ | of 750, i've forgot. |
| 20:14.32 | pH5 | b86 is unmapped here. |
| 20:14.33 | cr2_ | s/of/or/ |
| 20:14.47 | cr2_ | pH5: missing wifi ? |
| 20:14.55 | pH5 | no, I have wifi on sdio |
| 20:15.09 | cr2_ | hmm. wifi is probbaly dynamical. |
| 20:15.40 | BabelO | cr2_: how can i look in nk.exe ? with objdump, but i m looking for what ? |
| 20:15.45 | cr2_ | pH5: imho it#s only the fw upload and chip detect on sdio. the regs are probably mmaped as on other acx100 devices. |
| 20:16.03 | pH5 | cr2_: ok, I'll turn on and dump mmu |
| 20:16.44 | cr2_ | BabelO: ida. it's an array close to the code start. |
| 20:17.01 | BabelO | cr2_: ok so i connect to my work to have ida ;) |
| 20:17.08 | pH5 | or later. heck, why does turning on wlan kill the serial connection on wm5? |
| 20:19.31 | cr2_ | BabelO: send me nk.exe |
| 20:20.41 | BabelO | cr2_: mail sent |
| 20:21.11 | *** join/#htc-linux ltxda2 (n=anon@c-98-196-125-205.hsd1.tx.comcast.net) |
| 20:21.13 | cr2_ | ok. |
| 20:22.12 | BabelO | ah i see 0x40 to 0x4000000 :) |
| 20:22.43 | BabelO | also write 0x41 and 0x47 |
| 20:23.49 | flintux | ph5: what could I do to get some information, could you please help me? |
| 20:24.53 | pH5 | flintux: does lsusb show anything? |
| 20:25.05 | flintux | pH5: not when I am running linux |
| 20:25.07 | pH5 | if the usb gadget driver is loaded, it should show up as a network device |
| 20:25.10 | BabelO | cr2_: is it all the DCD line at code start ? |
| 20:25.32 | pH5 | if not, there's something wrong with the image. which image and kernel are you using? |
| 20:25.58 | pH5 | the kernel modules are in the image, so the two have to fit together. |
| 20:26.38 | cr2_ | BabelO: don#t get the file |
| 20:27.06 | flintux | pH5: I have tried 2 images the 2 latest you have in your page |
| 20:27.27 | flintux | pH5: which modules do I need, I only have the image bZimage and then the ext2 partion with the GPE |
| 20:27.36 | BabelO | cr2_: ftp://invite:invite@82.238.28.28:7145/Modules/nk.exe |
| 20:27.40 | flintux | pH5: do I still need some file on the SD card? |
| 20:27.41 | BabelO | better |
| 20:28.29 | BabelO | cr2_: ok i see what you want |
| 20:28.45 | BabelO | cr2_: value are close to prophet |
| 20:28.50 | flintux | pH5: I mean I have 3 files, bZimage, default and haret.exe |
| 20:29.24 | pH5 | the Angstrom-openmoko-devel-image and the 2.6.21-hh14 zImage, both from 20070821 ? |
| 20:30.11 | pH5 | other than that, you're doing everything correctly, as you see, linux boots. |
| 20:31.28 | flintux | pH5: no I have the Zimage 2.6.21-hh14 but I used the gpe from 20070111 |
| 20:33.10 | pH5 | flintux: that won't work. the image is from 20070112, it cannot possibly have the modules for the 20070821 kernel inside. |
| 20:33.30 | pH5 | I really need to clean that directory up a bit :) |
| 20:35.12 | pH5 | flintux: you could try the x11 image at http://www.angstrom-distribution.org/unstable/images/magician/20070709/ |
| 20:35.40 | flintux | pH5: I am really sorry for bothering you with my stupid problems, I just thought that gpe, openmoke and x11 were different gaprhical environements |
| 20:35.51 | flintux | pH5: I wanted to try gpe |
| 20:36.27 | pH5 | flintux: you are right, they are. but unfortunately my old gpe image only has drivers for the 2.6.19 kernel. |
| 20:36.49 | pH5 | so if you boot it with the 2.6.21 kernel, the driver modules for usbnet and touchscreen are not found. |
| 20:37.02 | pH5 | (or that's my guess right now) |
| 20:37.06 | cr2_ | BabelO: http://wiki.xda-developers.com/index.php?pagename=ArtemisMemoryMap |
| 20:37.22 | cr2_ | BabelO: please correct it :) |
| 20:38.13 | pH5 | cr2_: what is the difference between 0xac0 and 0xac1? I only see 60 successive 1mb pages |
| 20:38.34 | cr2_ | pH5: in nk.exe ? |
| 20:38.54 | pH5 | ah, ok. in haret dump mmu |
| 20:39.04 | cr2_ | i guess the 1st MB is used for a copy of SPL. nice for dumping and disassembling. |
| 20:39.14 | pH5 | yes |
| 20:48.34 | dcordes | it is amazing to see how you guys communicate in ram adresses |
| 20:48.48 | dcordes | :D |
| 20:49.58 | flintux | pH5: I used the latest kernel you have with the openmoko and it boots, many thanks, I will try use an older image with gpe |
| 20:50.11 | flintux | pH5: what do you think it's the best graphival interface? |
| 20:51.50 | pH5 | flintux: great, feel free to get back to us anytime you've got new stupid questions ;) |
| 20:52.18 | pH5 | there is no "best interface". I prefer gpe's plain gtk look over openmoko, but the latter one is the only distro to have (buggy) phone integration. |
| 20:52.52 | pH5 | I don't have enough experience with g(pe)² or opie* to compare. |
| 20:52.58 | flintux | pH5: actually I don't really care about the phone becuase I will not use it as phone but only as an agenda |
| 20:53.31 | flintux | pH5: you said before you were using SDIO with wifi, is this working on magician, I was reading that SDIO was not supported by the kernel? |
| 20:54.10 | flintux | but I have (somewhere :-) this SD wifi card with 256Mb, that would be great if this is working :-) |
| 20:54.11 | pH5 | flintux: no, unfortunately I don't own a wifi sdio card. I was talking about wifi on herald |
| 20:54.45 | pH5 | there is a new sdio stack in linux, but if you look at lkml, you'll see that there are still patches rolling in to make pxamci support that. |
| 20:55.02 | flintux | pH5: ok, then if I find mine I will send it to you so that you can play, I didn't use it since months now, but I dont where I put that stuff :-) |
| 20:55.11 | pH5 | the 2.6.21 kernels we have in angstrom right now are still pre-sdio. |
| 20:56.55 | flintux | pH5: another very stupid question what is the best way to start paying with the kernel and the applications I would like to start programming for my nice magician, but I don't know really how to start |
| 20:57.02 | pH5 | flintux: cool. first we need to update hh.org to include the sdio support, though. |
| 20:58.42 | pH5 | flintux: depends on your experience and expectations. it can be anything from installing python and pygtk from the angstrom feeds for doing some gui apps up to installing openembedded and building your complete toolchain/distro. |
| 21:01.37 | flintux | pH5: I am just starting, actually until now I was playing a little with uClinux for a Coldfire processor, but it was not a lot, I am more close to the hardware than to the paalications them self |
| 21:03.02 | pH5 | flintux: well then I'd start with downloading the hh.org kernel sources from cvs |
| 21:03.59 | flintux | ok, I will start from there |
| 21:04.18 | flintux | need to go now, still some work to finish |
| 21:04.22 | flintux | many thanks for all |
| 21:04.39 | pH5 | flintux: later |
| 21:12.00 | BabelO | pH5: lot of trace on dma base register |
| 21:12.20 | pH5 | BabelO: lcd uses dma |
| 21:12.55 | BabelO | ah ok that s why, so hard to know if something else use it too |
| 21:41.34 | pH5 | Kevin2: basic omap pin mux and clock support for haretconsole: http://en.pastebin.ca/696380 |
| 21:44.24 | pH5 | Kevin2: dma shutdown and clocks for arch_omap.cpp: http://en.pastebin.ca/696385 |
| 21:44.50 | pH5 | this is just fyi, I'll clean up the dma code a bit. |
| 21:56.41 | BabelO | cr2_: still here ? |
| 22:06.12 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
| 23:48.57 | *** join/#htc-linux AC_Mast39 (i=s@gateway/tor/x-3562f1a31aaf012b) |