| 00:20.02 | Kevin2 | cr2: Were you able to figure out why haret wasn't running on your jornada? |
| 00:48.50 | *** join/#htc-linux ljp (n=lpotter@203.94.178.46) |
| 01:04.27 | *** join/#htc-linux Hawk|- (n=Hawk@p57A53AB6.dip0.t-ipconnect.de) |
| 01:43.46 | *** join/#htc-linux shido6 (n=shido6@d221-68-200.commercial.cgocable.net) |
| 01:47.19 | *** join/#htc-linux psokolovsky_ (n=psokolov@236.usernat.ip.net.ua) |
| 02:40.54 | *** join/#htc-linux rob_w (n=bob@p85.212.134.154.tisdip.tiscali.de) |
| 02:44.16 | parmaster | for everyone who has a PSP http://www.noobz.eu/ |
| 02:44.39 | parmaster | now all current firmware can be downgraded to 1.5 |
| 03:52.09 | *** join/#htc-linux rob__w (n=bob@p85.212.152.51.tisdip.tiscali.de) |
| 03:55.43 | Niacin | heh parmaster :> |
| 03:55.50 | Niacin | i guess you have heard about toc2rta? |
| 04:16.10 | *** join/#htc-linux rob__w (n=bob@p85.212.153.239.tisdip.tiscali.de) |
| 04:58.07 | *** join/#htc-linux shido6 (n=shido6@d221-68-200.commercial.cgocable.net) |
| 06:00.34 | *** join/#htc-linux Ralith (n=ralith@soggy202.drizzle.com) |
| 07:07.20 | *** join/#htc-linux rmoravcik (n=rmoravci@pc-3s0zt5w2e4y0vzmhnrzq3a21zqajzfw.users.student.utc.sk) |
| 07:30.56 | *** join/#htc-linux tudenbart (n=willi@xdsl-81-173-170-235.netcologne.de) |
| 07:38.00 | *** join/#htc-linux shido6 (n=shido6@d221-68-200.commercial.cgocable.net) |
| 07:43.03 | *** join/#htc-linux linagee (n=linagee@unaffiliated/linagee) |
| 07:43.52 | linagee | does the HTC Hermes PDA phone have a GPS chip? |
| 08:29.56 | *** join/#htc-linux psokolovsky_ (n=psokolov@236.usernat.ip.net.ua) |
| 08:32.22 | *** join/#htc-linux rob_w (n=rob_w@p549B9142.dip0.t-ipconnect.de) |
| 08:39.08 | *** join/#htc-linux Fossi (n=cmewes@195.177.48.115) |
| 09:32.07 | *** join/#htc-linux pH5 (n=ph5@e178243225.adsl.alicedsl.de) |
| 10:52.06 | *** join/#htc-linux LunohoD (n=alex@e180122106.adsl.alicedsl.de) |
| 11:54.08 | *** join/#htc-linux dothebart (n=willi@xdsl-81-173-170-235.netcologne.de) |
| 12:22.15 | *** join/#htc-linux renatostore (n=renato4@72-181-119-85.dyn4.digitaleitalia.it) |
| 12:22.31 | renatostore | ph5: hi |
| 12:24.07 | *** join/#htc-linux cyrill62 (n=cyrill62@etud-icl.allhost.fupl.asso.fr) |
| 12:27.24 | *** join/#htc-linux psokolovsky_ (n=psokolov@236.usernat.ip.net.ua) |
| 12:27.43 | pH5 | hi renatostore |
| 12:29.25 | renatostore | we have to find phone power pin, isn't it? |
| 12:35.46 | pH5 | renatostore: yes. I believe it is controlled by the CPLD |
| 12:36.12 | pH5 | IIRC the cpld egpio registers are at 0xa9500000 and 0xa9500002 (16bit) |
| 12:36.42 | renatostore | pls, can you remember me how to connect wince to linux by synce |
| 12:36.58 | pH5 | yesterday I looked at the rilgsm.dll code and I think it might be bit 0x10 in 0xa9500002 |
| 12:38.01 | pH5 | renatostore: depends on the wince and synce version. for wm2003se I use vdccm started as a user and run synce-serial-start as root |
| 12:41.29 | renatostore | what is the address to ping ? |
| 12:44.22 | pH5 | 192.168.0.201/202 or something like that |
| 12:45.20 | renatostore | if pda runs linux is 192.168.0.202 but if it run wince? |
| 12:46.21 | renatostore | i started dccm |
| 12:46.29 | renatostore | then synce-serial-start |
| 12:47.08 | renatostore | then on haret i press listen for network connection |
| 12:47.57 | renatostore | now i can see in ifconfig a ppp0 interface 192.168.131.102 |
| 12:48.08 | renatostore | then ? |
| 12:49.36 | renatostore | i should telnet 192.168.131.X 9999 |
| 12:49.46 | renatostore | what is X? |
| 12:50.03 | pH5 | hm. try 192.168.131.201 |
| 12:50.21 | pH5 | wait, doesn't ifconfig show you the ip of the peer? |
| 12:50.27 | pH5 | P-t-P |
| 12:59.33 | *** join/#htc-linux rob_w (n=rob_w@p549B9142.dip0.t-ipconnect.de) |
| 13:09.40 | pH5 | renatostore: do you know what is connected at a9300000 (phys 06000000)? the AlpineMemoryMap in the xda-developers wiki doesn't list this. |
| 13:14.24 | *** join/#htc-linux WizMaui (n=WizMaui@62.112.90.231) |
| 13:17.01 | pH5 | renatostore: I think there are some egpio pins both at 0xa9500000,0xa9500002 and 0xa9300000,0xa9300002. you should watch those addresses when turning on/off the phone |
| 13:30.35 | renatostore | pls, the command to watch addresses |
| 13:31.45 | pH5 | set trace 0xa9500000 |
| 13:31.47 | pH5 | wi 5 |
| 13:32.27 | pH5 | then mute all those irqs you'll see with set ii <irq-nr> and try again to only see writes to 0xa9500000 |
| 13:33.04 | pH5 | set trace2 0xa9500002 to watch two addresses at the same time |
| 13:42.06 | renatostore | ph5: i'm having problem to setup connection, i don't know why |
| 13:42.21 | renatostore | can i perform this analisys in batch mode |
| 13:42.35 | renatostore | ? |
| 13:42.55 | renatostore | redirecting wi 5 to output file? |
| 13:43.01 | pH5 | and I'm having problems disassembling the phone power function. there is an ugly mess of writes to 0xa93, 0xa95 and 0xa96, so even the asic5 chip is somehow involved :-/ |
| 13:43.21 | pH5 | sure, use the log command to redirect the output to a file |
| 13:43.54 | renatostore | alpine doesn't have asic chip |
| 13:44.38 | pH5 | http://wiki.xda-developers.com/index.php?pagename=ASIC5 |
| 13:44.46 | pH5 | http://wiki.xda-developers.com/index.php?pagename=AlpineMemoryMap |
| 13:45.01 | pH5 | it says ASIC5 at 0xa9600000 (phys 0x04000000) |
| 13:46.44 | renatostore | sorry |
| 13:48.40 | *** join/#htc-linux Zule (n=Zule@24-155-71-190.dyn.grandenetworks.net) |
| 13:51.50 | *** part/#htc-linux Zule (n=Zule@24-155-71-190.dyn.grandenetworks.net) |
| 14:11.40 | renatostore | ph5: i did |
| 14:11.59 | renatostore | and found these irq |
| 14:12.04 | renatostore | 21 |
| 14:12.07 | renatostore | 149 |
| 14:12.16 | renatostore | end |
| 14:13.28 | pH5 | the irqs are not interesting. we only want to see the traces of writes to the given memory addresses. |
| 14:13.59 | pH5 | btw, a9300000 is phys 06000000, which is still in PXA_CS1_PHYS, so maybe that address range is part of asic5 (so maybe egpios on the asic5 chip) |
| 14:18.45 | renatostore | what infos do you need? |
| 14:18.55 | renatostore | i have lines like this |
| 14:19.15 | renatostore | 005417baa: irq 21 (BTUART) |
| 14:19.44 | pH5 | renatostore: I have written down the phone initialization in C pseudocode (http://phpfi.com/198582). do you want to see the wince assembly too and perhaps check that I got all the gpios right? |
| 14:20.48 | renatostore | what about power? |
| 14:22.13 | pH5 | that is probably the cpld egpio nr. 15 (the set_egpio_a95(1<<15,1) line), but I'm not sure about it. this code is just what wince does when turning on the phone. |
| 14:23.11 | renatostore | so what's now? |
| 14:24.26 | pH5 | write a driver :) |
| 14:25.04 | renatostore | i didn't understand the question about wince assembly |
| 14:25.25 | pH5 | do you know ARM assembly? |
| 14:25.29 | renatostore | no |
| 14:26.28 | renatostore | the driver can be copied from magician, isn't it? |
| 14:26.44 | pH5 | ok, then it won't help. I would send the asm code so you could double check that my pseudo code is correct, that's why I asked. |
| 14:26.55 | pH5 | renatostore: yes, you should be able to copy the magician's driver structure. |
| 14:27.47 | renatostore | so i wait fo you |
| 14:44.13 | renatostore | meanwhile, have you got any tric for the battery? |
| 14:44.35 | renatostore | after few secons of inattivity, screen became white |
| 14:44.50 | renatostore | and no more response |
| 14:58.04 | pH5 | Does the asic5 have an uart? I guess the asic5 parts might set up the gsm data uart. |
| 14:58.08 | pH5 | renatostore: what did you do? |
| 15:00.14 | renatostore | ph5: I followed your instructions |
| 15:00.35 | renatostore | first: |
| 15:00.40 | renatostore | log output |
| 15:00.51 | renatostore | set trace 0xa9500000 |
| 15:00.52 | renatostore | wi 5 |
| 15:00.57 | renatostore | second: |
| 15:01.09 | renatostore | log output2 |
| 15:01.18 | renatostore | set ii 26 1 |
| 15:01.24 | renatostore | set ii 23 1 |
| 15:01.31 | renatostore | set ii 30 1 |
| 15:01.41 | renatostore | set ii 10 1 |
| 15:01.48 | renatostore | set ii 141 1 |
| 15:01.50 | *** join/#htc-linux matrix_ (n=matrix@74-140-83-131.dhcp.insightbb.com) |
| 15:02.03 | renatostore | set trace2 0xa9500002 |
| 15:02.11 | renatostore | wi 20 |
| 15:02.24 | renatostore | and turn flight mode on |
| 15:02.26 | matrix_ | hi |
| 15:02.27 | pH5 | hm, that looks good |
| 15:02.43 | renatostore | the result is a file output2 |
| 15:02.59 | renatostore | with lines like this |
| 15:03.18 | renatostore | 004c074b: irq 21 (BTUart) |
| 15:04.12 | pH5 | renatostore: no lines with 'debug' in them? |
| 15:04.26 | pH5 | hi matrix_ |
| 15:04.46 | renatostore | only (BTUART) and (gpio 115) |
| 15:05.11 | pH5 | hm. what haret version is this? |
| 15:05.43 | renatostore | 200611242327 |
| 15:05.44 | matrix_ | is linux working ok with sx66? |
| 15:06.46 | cr2 | pH5: asic5 has a serial port and 2 pcmcia "slots" afaik. |
| 15:06.46 | *** join/#htc-linux Niacin (n=Niacin@static-71-97-126-90.dllstx.dsl-w.verizon.net) |
| 15:07.11 | cr2 | the base addresses are seen in .data |
| 15:07.46 | cr2 | renatostore: do you have working wifi ? |
| 15:08.02 | renatostore | yes |
| 15:08.25 | renatostore | in wince |
| 15:08.39 | renatostore | it is too early for linux on alpine |
| 15:08.46 | cr2 | ok, then you may check if acx100 registers are accessed. |
| 15:08.52 | pH5 | cr2: I see, but just for voice calls we won't need the data port on the asic5, right? |
| 15:09.07 | cr2 | matrix_: sx66 is blueangel ? |
| 15:09.25 | matrix_ | yes |
| 15:09.29 | cr2 | pH5: i think it is for gprs. pcmcia is for the backpack, like on hx4700. |
| 15:09.53 | cr2 | matrix_: i think it works. at least i was told so :) |
| 15:10.15 | matrix_ | the wi-fi is working too? |
| 15:10.24 | cr2 | matrix_: was a surprise for me because of CDMA. but they say so. |
| 15:10.33 | pH5 | cr2: is there an actual backpack for the hx4700? |
| 15:11.10 | matrix_ | for install i need the follow this guide http://handhelds.org/moin/moin.cgi/BlueAngel? |
| 15:11.19 | cr2 | wifi works only on universal (and sable). where the acx100 chip is memory mapped. all pcmcia mapped acx100 devices fail |
| 15:11.28 | cr2 | pH5: i think yes. |
| 15:11.34 | matrix_ | ok |
| 15:11.36 | matrix_ | thanks |
| 15:11.37 | cr2 | matrix_: yes. |
| 15:12.51 | psokolovsky_ | cr2, Hi! Are you sur eof such acx100 statistics? |
| 15:14.22 | renatostore | how to check acx100 on Alpine and make wifi works |
| 15:15.24 | renatostore | we have a lot of job: phone, battery, wifi, bluetoot ... |
| 15:20.43 | cr2 | psokolovsky_: do you know any working acx100 on pxa2xx-pcmcia ? |
| 15:21.44 | psokolovsky_ | cr2, there's no support for pcmcia proper at all. it's still just address. mere address. doesn't rx3000 work? |
| 15:22.17 | cr2 | renatostore: bt should be easy, if you'll find the power and reset gpios. |
| 15:22.26 | cr2 | psokolovsky_: rx3xxx is not pxa. |
| 15:22.53 | psokolovsky_ | lol ;-) so, it's pxa what sux? |
| 15:23.12 | psokolovsky_ | do you hint there may be pcmcia timings involved? |
| 15:23.24 | cr2 | pcmcia is not just an address, you need to init a lot of other gpio stuff & co. |
| 15:23.41 | cr2 | maybe. |
| 15:24.00 | cr2 | we need to check the MECR settings. |
| 15:25.00 | cr2 | renatostore: the battery should be very similar to magician. |
| 15:25.04 | renatostore | cr2: also suspend mode? |
| 15:25.21 | cr2 | highly likely. |
| 15:25.25 | psokolovsky_ | cr2, but again: pcmcia is just "wrapper" around the same old memory io and io ports. we can use memory io directly, and it hardly would differ from acx at any otehr base address |
| 15:25.49 | psokolovsky_ | anyway, it seems I'll leave acx100 on h4000 for the last dish... |
| 15:26.02 | cr2 | renatostore: you can check the acx100 with "wi". |
| 15:26.12 | renatostore | how? |
| 15:26.16 | cr2 | psokolovsky_: seems to be a good idea. |
| 15:26.18 | renatostore | command |
| 15:26.34 | cr2 | 0xa9800000 0x10000000 0x04 acx100 ? |
| 15:26.52 | cr2 | try to trace the 0xa9800000 with 0xfff mask. |
| 15:26.53 | renatostore | ? |
| 15:27.02 | cr2 | set trace 0xa980000 |
| 15:27.12 | renatostore | set trave 0xa9800000 |
| 15:27.13 | cr2 | hmm. |
| 15:27.24 | cr2 | set trace 0xa9800000 |
| 15:27.28 | cr2 | yes. |
| 15:27.45 | cr2 | with working wifi. |
| 15:27.51 | cr2 | set tracemask 0xfff |
| 15:27.55 | cr2 | of |
| 15:27.57 | cr2 | or |
| 15:28.02 | cr2 | set tracemask 0xffff |
| 15:28.13 | cr2 | and then 'wi 10' |
| 15:28.23 | cr2 | you should see 2 addresses accessed. |
| 15:28.42 | cr2 | if you'll see it, then you'll have working wifi very fast. |
| 15:29.40 | renatostore | how many f in tracemask? |
| 15:29.46 | cr2 | hmm. pcmcia gpios are enabled on alpine. it's a "bad" sign. |
| 15:29.50 | cr2 | 0xffff |
| 15:30.35 | renatostore | i have to torn on wifi during wi 10? |
| 15:31.21 | cr2 | no. just leave it working. |
| 15:31.36 | cr2 | there should be some activity. |
| 15:32.00 | cr2 | you need on/off for the power/reset gpios. and maybe irq. |
| 15:33.59 | renatostore | ok i did |
| 15:34.06 | renatostore | what are you looking for |
| 15:34.08 | renatostore | ? |
| 15:34.37 | renatostore | irq? |
| 15:39.36 | *** join/#htc-linux jeanseb (n=jeanseb@88.164.32.155) |
| 15:40.54 | cr2 | do you see the 0xa980000* memory accesses ? |
| 15:46.25 | renatostore | no |
| 15:47.00 | renatostore | i can't see a line with 0xa980000 |
| 15:47.52 | renatostore | i have a lot of lines like this |
| 15:48.00 | *** join/#htc-linux zippo (n=zippo@c-68-57-148-75.hsd1.va.comcast.net) |
| 15:48.08 | renatostore | 00008383: irq 26 (TMR0) |
| 15:55.00 | renatostore | cr2? |
| 16:29.22 | *** join/#htc-linux jjazz_ (n=jjazz@cpe-24-90-14-159.nyc.res.rr.com) |
| 16:32.11 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 16:34.39 | *** join/#htc-linux goxboxlive (n=goxboxli@9.80-202-160.nextgentel.com) |
| 16:54.32 | *** join/#htc-linux Zule (n=Zule@24-155-71-190.dyn.grandenetworks.net) |
| 16:54.41 | *** part/#htc-linux Zule (n=Zule@24-155-71-190.dyn.grandenetworks.net) |
| 17:11.31 | goxboxlive | cr2. I bought the A780. Dont know if it is GPS on it. Since it didnt said anything about it in the auction i guess there arent. But what the heck, it's a cool phone anyway. |
| 17:27.11 | *** join/#htc-linux cyrill62 (n=cyrill62@ble59-5-82-233-205-36.fbx.proxad.net) |
| 17:27.52 | *** join/#htc-linux linagee (n=linagee@166.195.186.156) |
| 17:40.05 | *** join/#htc-linux linagee_ (n=linagee@166.195.96.231) |
| 17:47.55 | *** join/#htc-linux linagee__ (n=linagee@166.184.95.136) |
| 17:59.36 | *** join/#htc-linux WizMaui (n=WizMaui@62.112.90.231) |
| 18:10.43 | *** join/#htc-linux rob_w (n=bob@p85.212.153.239.tisdip.tiscali.de) |
| 18:21.39 | *** join/#htc-linux pwr (n=pwr@86.121.146.46) |
| 18:40.44 | *** join/#htc-linux goxboxlive (n=goxboxli@9.80-202-160.nextgentel.com) |
| 18:42.15 | *** join/#htc-linux crashmatrix (n=quakepro@s5590785f.adsl.wanadoo.nl) |
| 18:42.53 | renatostore | cr2: can you help me? |
| 18:57.21 | *** join/#htc-linux linagee_ (n=linagee@ip68-8-184-71.sd.sd.cox.net) |
| 19:06.52 | *** join/#htc-linux Ralith (n=ralith@66.150.12.86) |
| 19:34.23 | cr2 | renatostore: ok. that's not the end of the world. |
| 19:35.52 | cr2 | goxboxlive: i really liked it with gps and maps. but since you have a bt gps, it should not be a big problem. |
| 19:48.07 | *** join/#htc-linux x-- (n=x-x2@silver.liacs.nl) |
| 19:55.57 | *** join/#htc-linux goxboxlive (n=goxboxli@9.80-202-160.nextgentel.com) |
| 19:55.59 | *** join/#htc-linux tudenbart (n=willi@xdsl-213-196-254-132.netcologne.de) |
| 20:07.59 | renatostore | cr2: hi |
| 20:10.24 | *** join/#htc-linux shido6 (n=shido6@d221-68-200.commercial.cgocable.net) |
| 20:17.44 | *** join/#htc-linux rzr (n=RzR@lav35-1-82-236-136-171.fbx.proxad.net) |
| 20:35.32 | *** join/#htc-linux rob_w (n=bob@p85.212.153.239.tisdip.tiscali.de) |
| 20:53.41 | goxboxlive | cr2: We are allmost turning over 100K views inthe xda forum :-) |
| 21:00.52 | cr2 | yeah, but there is a lot of junk in this thread, and we need to finish the device support ;) |
| 21:03.26 | cr2 | goxboxlive: you have tried the initramfs on universal. can we routinely add the modules into initramfs, and free the rootfs (SD or ramdisk) from modules ? |
| 21:05.13 | Foxdie | which device are you guys working on? |
| 21:05.36 | cr2 | all pxa + hermes/trinity. |
| 21:06.04 | Foxdie | whee |
| 21:06.10 | Foxdie | I've got a universal |
| 21:06.36 | Foxdie | odd thing is, I boot with wifi enabled and it freezes as soon as opie loads |
| 21:06.45 | Foxdie | thats with the latest files |
| 21:07.02 | Foxdie | can't wait for openmoko to arrive, it looks dead sexy |
| 21:08.07 | cr2 | well, don't load the wifi modules on boot. |
| 21:08.45 | cr2 | actually, moko needs as much porting as anything else. |
| 21:13.02 | pH5 | I have high hopes for the gsm daemon. |
| 21:14.12 | cr2 | pH5: do you think the BT headset will be supported ? |
| 21:15.18 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 21:16.05 | Foxdie | I haven't altered any settings, it's a fresh install cr2 |
| 21:16.09 | pH5 | cr2: probably not in phase 0. |
| 21:17.01 | pH5 | but that doesn't bother me too much, I still don't know how to setup the gsm/bt chips on the magician for headset communication.. |
| 21:17.04 | cr2 | pH5: why ? |
| 21:17.18 | cr2 | why not in phase 0 ? |
| 21:17.45 | cr2 | i forgot which wm9xxx chipset they are using. |
| 21:18.01 | pH5 | I just assume that they want to get their stuff out in the wild and not too much integration work is done yet. but I'd be happy to be proven wrong. |
| 21:20.03 | cr2 | i'm missing a clearly documented view, how to switch the audio sources / sinks on the API level. |
| 21:20.52 | cr2 | if i was on a deadline, i'll hack something together, but it's an obviously wrong approach. |
| 21:34.21 | pH5 | I'll wait for their code drop before I start the bickering ;) |
| 21:34.22 | pH5 | Handling bt headsets probably involves both gsmd and btaudiod or whatever the bluetooth alsa people came up with lately, I hope for a clean dbus api. |
| 21:38.32 | cr2 | pH5: imho, not on the universal. |
| 21:38.53 | *** join/#htc-linux goxboxlive (n=goxboxli@9.80-202-160.nextgentel.com) |
| 21:39.39 | cr2 | pH5: there is one obviuos device we can do something about: pxa27x-cif |
| 21:39.57 | pH5 | cr2: on the universal the pcm connection between gsm baseband and bt chip goes through the sound chip? |
| 21:40.03 | cr2 | platform_device |
| 21:40.08 | cr2 | pH5: yes. |
| 21:40.33 | cr2 | very nice and clean design. |
| 21:40.50 | pH5 | indeed |
| 21:42.37 | pH5 | cr2: pxa27x-cif? i have no idea where to start with that. |
| 21:44.48 | cr2 | ./drivers/media/video/pxa_camera_ov.c |
| 21:45.01 | cr2 | ./drivers/media/video/ov96* |
| 21:45.25 | cr2 | in the e680-linux kernel |
| 21:45.28 | pH5 | cr2: wasn't there somebody who started to port pxa_camera.c to 2.6? |
| 21:45.37 | cr2 | don't know. |
| 21:45.37 | pH5 | I thought I read that on lkml or arm-kernel |
| 21:46.51 | cr2 | http://sourceforge.net/projects/e680 |
| 21:48.14 | pH5 | cr2: I know, I have that tree on my hd for quite a while.. |
| 21:48.47 | cr2 | ok. |
| 21:50.14 | goxboxlive | Could this be something you need? MODULE_DESCRIPTION("Bulverde Camera Interface driver") |
| 21:50.22 | goxboxlive | Or is it useless |
| 21:51.04 | goxboxlive | http://husaberg.toby-churchill.com/balloon/linux-2.6.9-rc3-tcl2/drivers/media/video/ |
| 21:52.45 | cr2 | /FIXME: get rid of this |
| 21:54.07 | goxboxlive | cr2: SOmeone at the xda developers has made a new bluetooth stack for the universal. Could that be something intresting for us? Do you think they have some further information about the BT that we allready know? |
| 21:54.45 | cr2 | don't think so. |
| 21:54.50 | goxboxlive | ok |
| 22:52.41 | *** join/#htc-linux Ralith (n=ralith@soggy202.drizzle.com) |
| 23:59.45 | *** join/#htc-linux Niacin (n=Niacin@cpe-76-187-29-166.tx.res.rr.com) |