| 00:07.04 | *** join/#htc-linux lkcl (n=lkcl@88-107-241-42.dynamic.dsl.as9105.com) |
| 00:09.15 | *** join/#htc-linux rejon (n=rejon@c-67-174-202-239.hsd1.ca.comcast.net) |
| 00:10.53 | *** part/#htc-linux rejon (n=rejon@c-67-174-202-239.hsd1.ca.comcast.net) |
| 00:46.51 | *** join/#htc-linux awelux (n=awelux@lvps87-230-8-217.dedicated.hosteurope.de) |
| 00:51.45 | lkcl | arse! you're right - sound no longer works. |
| 00:53.31 | lkcl | however, there's some comments etc. i think there's been some changes by... ohh... can't remember. snd_pxa2xx_i2sound_i2slink_free() - to do with underflow reference counts |
| 00:54.04 | lkcl | where the link isn't switched off. |
| 00:56.57 | lkcl | the comments about the 'flush' function mention that the i2s bus _stays_ shut down until both the receive and transmit fifos are flushed. |
| 00:57.27 | lkcl | and that 'it is hoped' that the codec takes care of slurping data from the i2s bus |
| 00:59.59 | lkcl | ok actually it works ha ha it's opie that doesn't work |
| 01:00.54 | lkcl | which is odd. oh wel. |
| 01:02.44 | lkcl | http://hands.com/~lkcl/hp6915/pxa2xx-i2sound.patch |
| 01:04.25 | lkcl | cat /dev/dsp etc. works but opie doesn't, after setting volume and mic to max in opie. |
| 01:19.47 | *** join/#htc-linux psokolovsky_ (n=psokolov@ip.85.202.124.214.dyn.sub-9.broadband.voliacable.com) |
| 07:25.58 | *** join/#htc-linux rob_w (n=rob_w@p549B9E73.dip0.t-ipconnect.de) |
| 07:35.33 | *** join/#htc-linux Goxboxlive|work (n=goxboxli@gw.hjelcowi.no) |
| 07:42.02 | Goxboxlive|work | good morning |
| 07:42.35 | *** part/#htc-linux Goxboxlive|work (n=goxboxli@gw.hjelcowi.no) |
| 07:45.05 | *** join/#htc-linux goxboxlive (n=goxboxli@gw.hjelcowi.no) |
| 07:50.42 | *** join/#htc-linux pH5 (n=ph5@e178251142.adsl.alicedsl.de) |
| 08:14.54 | goxboxlive | lkcl are you there |
| 08:16.27 | goxboxlive | What was this sound stuff you where talking about. Does it work from shell and not from opie? |
| 08:17.18 | goxboxlive | There hasent been any updates in the opie cvs the last days, so that is kind of strange. Why have this suddenly happend. |
| 08:17.58 | *** join/#htc-linux Fossi (n=cmewes@195.177.48.115) |
| 08:51.51 | *** join/#htc-linux TripleDES (n=sergio@84.77.155.74) |
| 09:09.25 | *** join/#htc-linux awelux (n=awelux@lvps87-230-8-217.dedicated.hosteurope.de) [NETSPLIT VICTIM] |
| 09:09.25 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) [NETSPLIT VICTIM] |
| 09:12.59 | goxboxlive | hi awelux, so you are alive :-) |
| 09:25.39 | *** join/#htc-linux babeloued (n=Fabrice@faim1.itesoft.com) |
| 10:57.52 | Kevin2 | cr2: If you get a chance, can you try haret.exe (rev 130) from svn://www.shadowmite.com/home/svn/ppc6700/haret |
| 10:58.29 | Kevin2 | This version uses mainline cegcc to compile. We think mainline cegcc will work on wince 2.1 now. |
| 11:45.41 | *** join/#htc-linux bitschubser (n=meron@p508652A4.dip.t-dialin.net) |
| 11:55.19 | *** part/#htc-linux bitschubser (n=meron@p508652A4.dip.t-dialin.net) |
| 13:00.24 | *** part/#htc-linux babeloued (n=Fabrice@faim1.itesoft.com) |
| 13:01.51 | *** join/#htc-linux babeloued (n=Fabrice@faim1.itesoft.com) |
| 13:18.47 | cr2 | Kevin2: the program works, but it can't be closed and needs an exit button. |
| 13:20.20 | cr2 | i'm also skeptical about booting linux. and i need to write machine-dependent handlers to switch off companion ASIC busmaster DMA and USB host. |
| 13:24.55 | cr2 | Kevin2: the GetSystemPowerStatusEx is available for wince >1.0, but it does not show voltage/current/temperature. |
| 13:45.29 | goxboxlive | cr2: I found out one thing that doesent make any sence when it comes to sound |
| 13:45.38 | goxboxlive | There is noe /dev/dsp |
| 13:46.42 | goxboxlive | So i guess that's why we have problems with sound now. |
| 13:47.34 | Kevin2 | cr2: Thanks. I don't know anything about the GUI stuff. Any idea why it displays differently? (I noticed it shows up differently on ce5 when I made the app require 2.1 instead of 3.0 -- the exit button is on the bottom there.) Any idea on what we can change to make it display correctly? (It used to have an exit button, correct?) |
| 13:48.03 | Kevin2 | cr2: Did it show "detected machine jornada820"? I added just the stubs to detect the machine info you provided last time. |
| 13:49.00 | Kevin2 | I have to go to work - I'll be back later. |
| 13:59.02 | cr2 | Kevin2: yes, it showed the machine. and we need to redesign the gui dialog, because there was no exit button from the very beginning. what you think is an exit button, is actually a wince minimize button, and it is supplied by wince >=3.0 for all programs. |
| 13:59.36 | cr2 | goxboxlive: do we include the alsa-oss compat modules ? |
| 14:06.43 | cr2 | yes, it's in the config, but is it loaded ? |
| 14:07.41 | lkcl | no, am not here, goboxlive |
| 14:07.57 | lkcl | yes sound works from shell and not opie. but i have been messing about so i am not surprised. |
| 14:11.21 | *** join/#htc-linux psokolovsky_ (n=psokolov@ip.85.202.124.214.dyn.sub-9.broadband.voliacable.com) |
| 14:12.45 | lkcl | goboxlive: mmmm... /dev/dsp is an OSS thingy, not ALSA. so you need to compile up the ALSA 'oss emulation' modules and modprobe them. snd-mixer-oss snd-pcm-oss - stuff like that. |
| 14:14.08 | lkcl | then the snd-mixer-oss etc. etc. modules need to be listed in /etc/modutils.d/somefilesomewhere, such that they will turn up in /etc/modules. |
| 14:14.30 | lkcl | stuff in /etc/modules, if you look carefully in /etc/init.d/somewhere, get loaded at boot time. |
| 14:18.48 | *** join/#htc-linux jjazz (n=jjazz@cpe-24-90-14-159.nyc.res.rr.com) |
| 14:20.42 | *** join/#htc-linux g3gg0_ (n=g3gg0@ppp-82-135-65-110.dynamic.mnet-online.de) |
| 14:23.27 | goxboxlive | lkcl: Well, yes you are right. The mixer-oss and pcm-oss where missing. Sound works also with opie now. |
| 14:23.38 | lkcl | wheeee |
| 14:24.14 | lkcl | ok so it's nothing to do with the kernel code - you didn't need my messing-about-patch, right? |
| 14:24.23 | goxboxlive | psookolovsky_ Forget about testing sound. There where some missing modules that where not loaded at boot. |
| 14:25.09 | goxboxlive | no i dont know lkcl. Will they make sound in the main speakers work? |
| 14:25.28 | goxboxlive | We have for now, only sound in the headphones. |
| 14:25.31 | lkcl | if you have _some_ sound then you're ok |
| 14:25.44 | lkcl | oh that's unlikely to be anything to do with the codec. |
| 14:26.02 | goxboxlive | ok |
| 14:27.21 | lkcl | that reminds me i must do the gpio trace for headphones. |
| 14:29.51 | *** join/#htc-linux rmoravci1 (n=rmoravci@pc-3s0zt5w2e4y0vzmhnrzq3a21zqajzfw.users.student.utc.sk) |
| 14:30.09 | cr2 | goxboxlive: the sound switching in wavedev.dll is a nightmare. what we are doing now is not quite right, but i still don't have the complete picture. |
| 14:31.09 | cr2 | btw, do you have the working battery applet now ? we should enable ACR reset at some time. |
| 14:31.29 | lkcl | interesting. A3 gets powered-on only on-demand when the headphone is required, instead of A6. |
| 14:31.38 | lkcl | wonder what happens if both of them are switched on, ha ha |
| 14:32.25 | goxboxlive | Yes i have battery applet now. And it works. It was missing because of some changes in OE. I had to make a hack to make it install. |
| 14:33.00 | goxboxlive | Yes, enable ACR if it is safe thow. |
| 14:33.34 | goxboxlive | BTW, what is ACR? |
| 14:34.06 | cr2 | accumulated current something. it is written to the ds276x eeprom. |
| 14:34.30 | cr2 | do you know what is the meaning of the wince battery color bars ? |
| 14:34.57 | *** join/#htc-linux lkcl_ (n=lkcl@88-107-161-10.dynamic.dsl.as9105.com) |
| 14:35.01 | goxboxlive | I guess i know. |
| 14:35.21 | goxboxlive | Red= pacic, you bether charge or you been screwed |
| 14:35.34 | goxboxlive | /s/pacic/panic/ |
| 14:37.43 | goxboxlive | Cr2: yuo menstion yesterday that your FN key worked so you could type colon (:) . Do you have a keymap.map file, or was it without it? |
| 14:39.45 | cr2 | yellow ? |
| 14:39.58 | cr2 | red is 10% afaik. |
| 14:40.31 | cr2 | i don't have the : on my keyboard it is Fn. |
| 14:41.02 | cr2 | what is the keycode of '.' ? (showkeys) |
| 14:41.36 | goxboxlive | yellow i think start at 20%, and it means, you bether hurry charging. |
| 14:41.42 | cr2 | Fn is keycode 100 (AltGr) |
| 14:41.44 | cr2 | ok. |
| 14:42.27 | cr2 | i have loaded the euro2.map.gz, but it did not want to show € |
| 14:42.37 | cr2 | but it may be the console font. |
| 14:42.58 | cr2 | problem, i don't know if it has € |
| 14:43.12 | cr2 | so : is a better test. |
| 14:43.13 | goxboxlive | where do you place the map file?, anywhere? or is it in /etc |
| 14:43.32 | cr2 | in home, and it can be gz |
| 14:43.33 | goxboxlive | and how do u load it? |
| 14:43.47 | cr2 | euro2.map.gz |
| 14:43.52 | cr2 | loadkeys euro2 |
| 14:44.02 | goxboxlive | so actually, i van take my map.gz file from my computer and just load it? |
| 14:44.03 | cr2 | it searches to .map and .map.gz |
| 14:44.12 | cr2 | in some predefined paths. |
| 14:44.28 | cr2 | yes, that's the purpose. |
| 14:44.51 | cr2 | but you need to do some adjustments for the AltGr modifier. |
| 14:47.13 | goxboxlive | ok, can see on my laptop that FN and Ctrl is placed inverse from the universal |
| 14:47.28 | goxboxlive | compared |
| 14:54.43 | *** join/#htc-linux lkcl_ (n=lkcl@88-107-161-10.dynamic.dsl.as9105.com) |
| 15:00.22 | goxboxlive | have to go, bbl |
| 15:01.19 | cr2 | about the sound. there are 9 multiplexed states in wince so it's not that easy like in the linux driver with 3 states. |
| 15:02.16 | cr2 | but i'm not sure all of 9 are full switchable. |
| 15:03.50 | lkcl_ | o btw does anyone know how to get interrupts from the asic3? |
| 15:04.07 | lkcl_ | the headphone detect is on an asic3 gpio on the sable |
| 15:04.33 | lkcl_ | what voodoo magic incantation do i need in c-code to get an irq handler called? |
| 15:04.54 | lkcl_ | and are there any examples around anywhere i can cut/paste? |
| 15:06.01 | lkcl_ | ahh... i've found asic3_gpio_irq_type |
| 15:06.57 | lkcl_ | hmmm... |
| 15:11.14 | lkcl_ | ok got one |
| 15:14.37 | lkcl_ | gor, that's a bit damn awkward! |
| 15:14.51 | lkcl_ | i'm surprised there's not a macro for it. |
| 15:20.28 | lkcl_ | :) |
| 15:23.53 | lkcl_ | ahh NUTs sound _isn't_ working any more |
| 15:24.34 | lkcl_ | oh - ok ha ha |
| 15:24.44 | lkcl_ | it works in the headphone not the speaker that's why |
| 15:24.44 | lkcl_ | my fault |
| 15:28.20 | *** join/#htc-linux rmoravcik (n=rmoravci@pc-3s0zt5w2e4y0vzmhnrzq3a21zqajzfw.users.student.utc.sk) |
| 15:29.09 | lkcl_ | ouch! |
| 15:29.18 | lkcl_ | ow! |
| 15:29.21 | lkcl_ | double-speed-sound! |
| 15:29.23 | lkcl_ | ha ha |
| 15:29.40 | pH5 | lkcl_: hey, I have that, too |
| 15:30.02 | lkcl_ | it's after i loaded the module about... on the 3rd time |
| 15:30.22 | lkcl_ | so the initialisation is a bit screwy |
| 15:31.04 | lkcl_ | pH5 can you try rmmodding _both_ the snd-htcxxxxx_audio module _and_ the snd-pxa2xx-i2sound module |
| 15:31.21 | lkcl_ | OW |
| 15:31.26 | cr2 | hmm. how do i decode the raw hci traffic ... |
| 15:31.27 | lkcl_ | ha ha |
| 15:31.32 | lkcl_ | headphones a bit close |
| 15:31.44 | lkcl_ | 1sec cr2... |
| 15:31.55 | lkcl_ | where's it coming from? |
| 15:32.02 | pH5 | cr2: hcidump -X -V is not verbose enough? |
| 15:32.52 | pH5 | lkcl_: I have the same problem with different drivers.. something wrong with the clocks |
| 15:33.14 | lkcl_ | much joy pH5 |
| 15:33.22 | lkcl_ | cr2: yeh a quick search shows that apparently hcidump does decodes |
| 15:33.48 | lkcl_ | http://www.linuxcommand.org/man_pages/hcidump8.html |
| 15:34.07 | lkcl_ | <PROTECTED> |
| 15:34.24 | lkcl_ | so if you have the data as a file, use that. |
| 15:39.17 | cr2 | pH5: these are raw strings, like the AT strings. |
| 15:40.21 | cr2 | dumped in wince, not from hci0. |
| 15:41.39 | cr2 | i need to know the message structure. |
| 15:42.15 | lkcl_ | btw cr2, you get email from me? ha ha |
| 15:43.49 | cr2 | heh. taking the kernel defconfig for a non-tagged version from OE instead of the kernel is retarded. |
| 15:44.02 | cr2 | lkcl_: yes. you are crazy :) |
| 15:44.04 | pH5 | your wince dump is different from a hcidump -w output? |
| 15:44.26 | lkcl_ | yup! |
| 15:45.27 | cr2 | pH5: i'm logging the raw serial traffic at BT init and BT headset pairing. some commands must be the "normal" hci, but the rest is TI-specific. i need to separate them. |
| 15:46.15 | cr2 | i can decode the TI commands as they are stored in the bts files. |
| 15:47.09 | lkcl_ | damn i removed the warranty-void label so carefully from my sable that it is perfectly intact. now of course i have to put the little screw back ha ha |
| 15:47.14 | lkcl_ | i cannot be bothered. |
| 15:47.25 | pH5 | cr2: I know. and if this serial traffic is just the raw hci traffic, you should be able to decode the normal parts with hcidump or wireshark |
| 15:48.03 | lkcl_ | cr2 - do you have one of these little headphones already? |
| 15:48.32 | cr2 | pH5: but i need to convert it from ascii "WI" format to a raw binary dump first. and to do a reasonable job i need to know the messages structure. |
| 15:48.53 | cr2 | lkcl_: 2.5" jack ? |
| 15:48.56 | lkcl_ | yeh |
| 15:49.20 | cr2 | yes. it came with ba,a780 and i have one more from motorola. |
| 15:49.26 | lkcl_ | okie |
| 15:49.39 | cr2 | only universal has normal 3.5" |
| 15:49.44 | lkcl_ | http://engr.smu.edu/~rajand/Pubs/ETC04_Bluetooth.pdf |
| 15:51.11 | lkcl_ | very basic diagram but it at least gives a clue |
| 15:51.24 | cr2 | thanks. |
| 17:05.53 | *** join/#htc-linux apt (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) |
| 17:05.53 | *** topic/#htc-linux is HTC Linux Channel: Find logs at http://apt.rikers.org/%23htc-linux/ | please check http://handhelds.org/moin/moin.cgi/HTC_2dPhones | http://wiki.xda-developers.com/index.php?pagename=Xanadux |
| 17:18.06 | *** join/#htc-linux awelux (n=awelux@lvps87-230-8-217.dedicated.hosteurope.de) |
| 17:21.11 | goxboxlive | hi poeple |
| 17:46.38 | psokolovsky_ | Hi! |
| 17:47.08 | psokolovsky_ | goxboxlive, confirmation: hx4700 sound works with CVS HEAD as of 15mins ago. static build, btw. |
| 17:49.00 | goxboxlive | psokolovsky_ Thanks for trying. I posted a message for you foe a while ago. We figured out why it didnt. The imgaes where missing snd-mixxer and snd-pcm modules. |
| 17:49.13 | psokolovsky_ | ;-) |
| 17:59.26 | *** part/#htc-linux babeloued (n=Fabrice@faim1.itesoft.com) |
| 18:36.51 | lkcl | allo darlins |
| 18:37.43 | *** join/#htc-linux rob_w (n=bob@p85.212.184.230.tisdip.tiscali.de) |
| 18:45.49 | *** join/#htc-linux BabelOued (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 18:51.23 | goxboxlive | hallo lkcl |
| 18:51.50 | lkcl | allo dude |
| 18:57.40 | *** join/#htc-linux asylumed (n=insanity@196.211.116.2) |
| 19:29.50 | *** join/#htc-linux asylume1 (n=insanity@196.211.28.91) |
| 19:36.25 | *** join/#htc-linux rob__w (n=bob@p85.212.179.208.tisdip.tiscali.de) |
| 19:38.13 | *** join/#htc-linux asylumed (n=insanity@196.211.116.2) |
| 19:52.06 | *** join/#htc-linux florian_ (n=fuchs@87.193.64.148) |
| 19:52.21 | florian_ | re |
| 20:10.41 | cr2 | lkcl: ok. i'll try to make suspend/resume working first, and battery charging. both look good on the universal now. |
| 20:11.04 | cr2 | goxboxlive: do you have : now ? |
| 20:13.58 | *** join/#htc-linux toi (n=pleemans@d5152D3B4.access.telenet.be) |
| 20:28.48 | lkcl | cool! |
| 20:45.42 | *** join/#htc-linux goxboxlive (n=goxboxli@9.80-202-160.nextgentel.com) |
| 20:48.36 | goxboxlive | cr2: are u there |
| 20:50.38 | cr2 | yes. |
| 20:50.41 | goxboxlive | hi |
| 20:50.55 | cr2 | have you made : working ? |
| 20:50.56 | goxboxlive | There is a thing i have noticed with the power driver |
| 20:51.22 | goxboxlive | No, Fn key is dead, could you send me your keymap.map.gz file |
| 20:51.55 | goxboxlive | the power led is not reacting as it should |
| 20:52.09 | goxboxlive | It, reamin from wince status. |
| 20:54.16 | cr2 | the leds do not work. |
| 20:54.51 | cr2 | bt/wifi work, but for a different reason. |
| 20:55.07 | goxboxlive | ok, it's just a cosmetic thing anyway. |
| 20:55.15 | goxboxlive | and why is that? |
| 20:56.30 | cr2 | they need a new driver. |
| 20:57.08 | cr2 | i'll boot universal now. |
| 20:57.41 | goxboxlive | ok, with ACR enabled? |
| 20:58.00 | cr2 | yes. |
| 20:58.27 | cr2 | do you have opie with battery applet enabled ? |
| 20:58.35 | cr2 | i can't build opie recently. |
| 20:59.39 | goxboxlive | Yes i have it. I'll mail you the battery-applet if you want it. |
| 20:59.51 | cr2 | module_data.current_accum = 1800 * 4; |
| 21:00.02 | cr2 | what is the value for universal ? |
| 21:00.05 | cr2 | 1620 ? |
| 21:00.22 | goxboxlive | 1620mAh |
| 21:00.31 | cr2 | ok |
| 21:00.52 | cr2 | should be a parameter probably. |
| 21:01.20 | cr2 | module_data.battery_life = (module_data.current_accum * 25) / 1800; |
| 21:02.30 | cr2 | we should check the wince data once again. |
| 21:02.54 | goxboxlive | ok |
| 21:04.14 | cr2 | psokolovsky_: does hx4700 have a 1800mAh main battery ? |
| 21:04.40 | psokolovsky_ | cr2, dunno ;-) |
| 21:05.23 | cr2 | open the box :) imho, this data should be in the eeprom. |
| 21:05.46 | cr2 | heh. where is the old cpq ds276x driver... |
| 21:05.52 | goxboxlive | HP Standard batteri hx4700 – 1800 mAh |
| 21:06.00 | cr2 | ok. |
| 21:06.29 | cr2 | but there are bigger batteries for universal (and not only for it) available. |
| 21:06.30 | psokolovsky_ | cr2, heh. you want me to reboot my stuff there? ;-) anyway, confirmed |
| 21:06.41 | cr2 | hardcoding the value is not good. |
| 21:07.08 | cr2 | maybe as a module override parameter if the eeprom value is suspicious. |
| 21:07.17 | pH5 | cr2: look at w1_ds2760.c |
| 21:07.27 | pH5 | rated capacity / 10 is stored in the eeprom |
| 21:07.28 | cr2 | is it there ? |
| 21:07.45 | pH5 | #define DS2760_RATED_CAPACITY 0x32 /* rated capacity in mAh / 10 */ |
| 21:07.58 | pH5 | second eeprom block, address 0x32 |
| 21:08.40 | cr2 | pH5: ok, is it used by the battery module ? i think not. |
| 21:09.20 | pH5 | look at drivers/hwmon/battery/h2200_battery.c |
| 21:09.48 | cr2 | ok. so the generic module does not handle it. |
| 21:11.43 | pH5 | the generic module doesn't connect to the battery class at all |
| 21:12.08 | pH5 | I have no idea yet, whether this is good or bad. |
| 21:13.45 | cr2 | i'll hardcode 1620 for now, but we need to do something about it later. |
| 21:16.02 | pH5 | ack. |
| 21:16.47 | *** join/#htc-linux rmoravcik (n=rmoravci@pc-3s0zt5w2e4y0vzmhnrzq3a21zqajzfw.users.student.utc.sk) |
| 21:20.01 | *** join/#htc-linux kung (n=kung@dslb-084-059-015-006.pools.arcor-ip.net) |
| 21:20.02 | kung | hi |
| 21:22.00 | kung | I've decided to finance an qtek 9090 by a mobile phone contract now... |
| 21:22.13 | cr2 | blueangel ? |
| 21:22.19 | kung | yea I guess so |
| 21:22.28 | kung | from what I read so far. |
| 21:22.33 | cr2 | pH5: why is max_charge = 1 , is it intended so ? |
| 21:22.37 | kung | I guess its well supported on linux |
| 21:22.48 | kung | well linux on it... |
| 21:23.05 | pH5 | cr2: for hx4700? I guess that's just a placeholder |
| 21:23.12 | cr2 | pH5: ok. |
| 21:23.27 | cr2 | so i need to put 1620 there too. |
| 21:23.43 | cr2 | kung: not with the latest kernel. |
| 21:24.09 | kung | does not need to be the latest kernel for me actually.. |
| 21:24.20 | kung | but why is it supported in earlier versions? |
| 21:24.27 | kung | and now no more? |
| 21:26.33 | cr2 | because the rest of the kernel has changed, and nobody adapted these changes to blueangel. some hardware was not supported at all, and now needs some fresh drivers. |
| 21:27.10 | cr2 | max_current=1900 on hx4700 |
| 21:27.28 | cr2 | i have never seen the values above 850 in wince on universal. |
| 21:27.51 | cr2 | ah. hx4700 has a pcmcia slot. |
| 21:28.05 | kung | how much work would it be to adapt it? |
| 21:28.11 | pH5 | the universal doesn't have cf? |
| 21:28.29 | goxboxlive | pH5, no, only SD |
| 21:28.32 | cr2 | pH5: no. it's big enough. |
| 21:28.37 | goxboxlive | :-) |
| 21:28.57 | pH5 | :) ok |
| 21:29.31 | cr2 | kung: so far nobody has done it. |
| 21:30.35 | cr2 | pH5: but 2A for a PDA. it's impressive. |
| 21:31.07 | kung | I mean is it like fixing a few compilation errors or more like rewriting all drivers |
| 21:31.26 | cr2 | the power supply for universal is rated 1A, so 850mA is ok. |
| 21:32.00 | cr2 | kung: both. i have fixed the compilation errors, but that broke some drivers too. |
| 21:32.42 | cr2 | if you want a working version, use the old trusty .12 described on hh.org |
| 21:32.53 | kung | do I have to erase win on it or can I get win back if linux fails? |
| 21:33.12 | cr2 | no. |
| 21:33.26 | kung | no what? |
| 21:33.33 | kung | I can't get it back or I can? |
| 21:33.50 | pH5 | I never tried writing to the microdrive over wlan while playing loud music, so no idea if those 1900mA are ever reached. |
| 21:33.51 | cr2 | you can flash linux (in theory) but i would not advice to do it. |
| 21:34.05 | pH5 | But the power supply is rated 2A here. |
| 21:34.15 | cr2 | pH5: what is the AC power supply rating ? |
| 21:34.19 | cr2 | ok. |
| 21:34.25 | kung | okay, so I would not destroy my pda in case linux fails..;) |
| 21:34.35 | kung | well first I need to get it.. |
| 21:34.52 | cr2 | kung: of course not. you need quite some knowledge to flash linux properly on blueangel. |
| 21:35.06 | cr2 | i didn't want to test it a year ago :) |
| 21:35.16 | kung | neither do I ..;) |
| 21:35.25 | cr2 | but we can try when the bugs are fixed in .19/.20 :) |
| 21:36.22 | kung | well, I hope they still have this device... I guess I've found a pretty good contract |
| 21:36.53 | kung | If they don't have it I'll buy it at ebay anyways..;) |
| 21:37.32 | cr2 | kung: they are not produced anymore, but there is big stock. and it's a very good engineered device, imho. |
| 21:38.02 | cr2 | the only thing missing by today's standards is the vga lcd. |
| 21:38.07 | kung | yea, I think its a bit old meanwhile but I can't afford a recent one, with these specs |
| 21:38.57 | kung | and well the new ones oftenly don't have an sdio port anymore just microsd slots for memory. |
| 21:39.31 | cr2 | i still keep it because it's a nice device. with 2D video accel. most pxa27x devices do not have it (hx4700 is an exception) |
| 21:39.47 | cr2 | sdio seems to be a flop. |
| 21:40.03 | cr2 | they even have published the specs now afaik. |
| 21:40.26 | cr2 | and wanted to get some insane amount of money for it before. |
| 21:41.10 | kung | maybe but there are still gps devices for it so I could enhance it by one |
| 21:41.24 | cr2 | while it's nothing more than a 1/4line SPI controller. |
| 21:41.47 | cr2 | sdio is not supported now. |
| 21:42.06 | cr2 | i can't get sd-501 working on blueangel even in wince for some reason. |
| 21:42.31 | cr2 | and the producer does not really want to write wince5 drivers. |
| 21:43.10 | kung | that sucks |
| 21:44.01 | *** join/#htc-linux g3gg0__ (n=g3gg0@ppp-82-135-69-170.dynamic.mnet-online.de) |
| 21:44.22 | cr2 | here is a nice summary: |
| 21:44.25 | cr2 | http://www.usglobalsat.com/forum/topic.asp?TOPIC_ID=302 |
| 21:46.19 | pH5 | Kevin2: 0018e2ba: debug 0769487c: e1d220b2(ldrh) 0000000c 0000000c |
| 21:46.38 | pH5 | Kevin2: is there anything the haret trace function can do about such things? |
| 21:46.53 | pH5 | Kevin2: this is a "ldrh r2, [r2, #2]" and trashes the address register |
| 21:47.24 | BabelOued | pH5: it is a trace from blueangel, right ? |
| 21:47.50 | pH5 | yes, I just talked with asylumed about the aic2 |
| 21:51.11 | BabelOued | i've same trace |
| 21:52.40 | cr2 | goxboxlive: /sbin/getkey 5 works on my zaurus. why don't you have this binary in the image ? |
| 21:53.57 | pH5 | BabelOued: I'd be interested in reads/writes to 0xa940000a and 0xa940000c to see whether there is a bit somewhere in the secondary registers that controls the DS1WM EN |
| 21:55.03 | goxboxlive | cr2: i dont know why it's not included. I guess it's not a part of the angstrom distro. |
| 21:55.14 | goxboxlive | what is getkey? |
| 21:56.58 | BabelOued | pH5: i get only trace from this adress one time...it s when i press power button when "wi 30" is running, after resume it display this value |
| 21:58.26 | *** join/#htc-linux FossiFoo (n=Fossi@e176099166.adsl.alicedsl.de) |
| 22:00.16 | cr2 | goxboxlive: it waits for a keypress for N seconds. |
| 22:00.48 | cr2 | BabelOued: look in the battdrv.dll if it's used only once. |
| 22:01.03 | cr2 | goxboxlive: i have : now |
| 22:01.13 | goxboxlive | do you have / |
| 22:01.18 | goxboxlive | or " |
| 22:01.22 | cr2 | can try it too. |
| 22:01.37 | cr2 | just wanted to say that it's easy. |
| 22:01.42 | goxboxlive | fn+p gives? |
| 22:02.07 | cr2 | i have reprogrammed only 1 key :) |
| 22:02.19 | goxboxlive | ok |
| 22:02.33 | cr2 | i don't have € though. how do i change the console font ? |
| 22:03.00 | cr2 | the battery is happily charging from usb. |
| 22:03.08 | pH5 | BabelOued: cool, that is likely the right register to disable the ds1wm during suspend |
| 22:03.22 | BabelOued | cr2: i look at it today and see some function like owms_read and owms_write and oms_iocontrol but didn t understand anything |
| 22:03.25 | pH5 | what value is written to base+0xa? |
| 22:04.22 | cr2 | goxboxlive: altgr keycode 52 = colon |
| 22:04.42 | cr2 | put this line into test.map |
| 22:04.47 | cr2 | and then do |
| 22:04.52 | cr2 | loadkeys test |
| 22:05.24 | cr2 | p is keycode 25 |
| 22:06.16 | cr2 | altgr keycode 25 = backslash |
| 22:06.23 | cr2 | on my german keyboard. |
| 22:06.52 | goxboxlive | thats, right, and o gives you slash |
| 22:07.01 | BabelOued | pH5: i m trying to do same the step |
| 22:07.11 | *** join/#htc-linux BabelOued (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 22:07.34 | cr2 | o has nothing here with Fn |
| 22:07.44 | cr2 | so you get the idea. |
| 22:08.29 | cr2 | pH5: what is base+0xa ? |
| 22:09.05 | goxboxlive | cr2: Do you know what getkey is a part of? Like i2c-detect is a part of lmsensors |
| 22:09.23 | cr2 | goxboxlive: i'm still not convinced that the green phone button should be ESC |
| 22:09.48 | cr2 | there is no rpm -q -f /sbin/getkey ;) |
| 22:10.02 | cr2 | need to grep in openzaurus stuff. |
| 22:11.08 | cr2 | CONSOLETOOLS_DIR-$(CONFIG_GETKEY) += getkey.o |
| 22:11.19 | cr2 | it seems to be a part of busybox |
| 22:11.25 | goxboxlive | ok |
| 22:11.37 | cr2 | ./packages/busybox/busybox-1.2.0/add-getkey-applet.patch |
| 22:11.52 | goxboxlive | cr2: No, i garee, that will mayve be a problem when phone is beeing used. |
| 22:12.28 | *** join/#htc-linux BabelOued (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 22:12.36 | cr2 | but we also need to make a correct opie mapping for the buttons. |
| 22:12.45 | pH5 | cr2: I think the aic2 has the same register layout as the aic3, only aligned at 16bit boundaries. 0xa is the secondary register index and read/write select register |
| 22:13.02 | cr2 | pH5: ok. |
| 22:13.05 | pH5 | 0xc is the data register |
| 22:16.45 | cr2 | goxboxlive: i'll commit the battery power patch to CVS. |
| 22:17.04 | goxboxlive | ok |
| 22:21.24 | cr2 | done. looks better now. |
| 22:22.10 | cr2 | the keyboard wakeup need to fixed. |
| 22:22.30 | pH5 | cr2: did you see the section about suspend/resume in the dev manual? |
| 22:22.43 | pH5 | also, dmitry said that there are two other versions of the pxa matrix keyboard driver |
| 22:23.29 | pH5 | oy. 23:23h |
| 22:23.33 | pH5 | good night everyone |
| 22:23.48 | *** part/#htc-linux pH5 (n=ph5@e178251142.adsl.alicedsl.de) |
| 22:25.27 | goxboxlive | cr2: So now, with the new updated module, the universal will be charged when connected to usb or power |
| 22:26.56 | cr2 | yes. |
| 22:27.22 | BabelOued | pH5 i got value on resume :) debug 01171ab4: e1c230b0(strh) 000000a0 a940000a |
| 22:28.01 | BabelOued | oups ... good night pH5 |
| 22:29.01 | BabelOued | cr2: resume don't restart wifi on latest haret |
| 22:29.14 | BabelOued | i take an old version |
| 22:31.42 | BabelOued | ok always same value at resume, good point :) |
| 22:49.47 | *** join/#htc-linux rejo1 (n=rejon@adsl-75-5-124-98.dsl.pltn13.sbcglobal.net) |
| 22:51.23 | *** part/#htc-linux rejo1 (n=rejon@adsl-75-5-124-98.dsl.pltn13.sbcglobal.net) |
| 22:58.01 | BabelOued | good night |
| 23:00.31 | *** join/#htc-linux lamikr (n=chatzill@aragorn.kortex.jyu.fi) |
| 23:06.45 | lamikr | cr2: Hi there. I made some updates to gomunicator to get it reading and reporting operator name, signal strength, battery status, etc. ok... It works now at least with h6300 ok. I anyway noticed that there were at least 3 or 4 ways to get battery info with AT commands... Some methods works for h6300, but obviously there are some other at commands for other devices. I made those to be a... |
| 23:06.47 | lamikr | ...configurable for each device, but implementation is still not 100 ready for those "other" ways than what h6300 uses. If interested in, see the configmodel.c and phonecomms.c and monitor.c to find out more. |
| 23:07.07 | lamikr | need to go to sleep now. |
| 23:07.51 | cr2 | lamikr: ok. i'd really like to have a ncurses version :) |
| 23:07.57 | cr2 | good night |
| 23:08.25 | cr2 | but maybe i'm a luddite :D |
| 23:10.22 | lamikr | cr2: No, it would be really good to have support for many backends and screen sizes... But it will be a lot of work to rip of the glib from many places not needed. |
| 23:11.17 | cr2 | i'm thinking of sirfmon(1) here. |
| 23:11.40 | cr2 | oh. that's nice http://www.geocities.com/blue_prasso/bluetooth/hci_commands.htm |