| 00:00.27 | awelux__ | I wish I could send you a screenshot. There are dot's in multiple colors all over the screen ;) |
| 00:03.55 | awelux__ | 0x2cdf48a7e7224f898989 |
| 00:05.46 | cr2 | what's that ? |
| 00:06.37 | awelux__ | that's me being lazy and typing something in here instead of on a piece of paper. |
| 00:06.56 | awelux__ | The memory dump of 10 bytes that are currently decompressed |
| 00:08.32 | awelux__ | 2C DF 48 A7 E7 22 4F 89 E3 CA |
| 00:08.38 | awelux__ | that is what the hex editor claims |
| 00:08.55 | awelux__ | but I made a mistake |
| 00:09.04 | awelux__ | and only the first 8 bytes are valid |
| 00:09.30 | cr2 | why you have multiple 89's |
| 00:09.39 | awelux__ | so forgetting the last bytes I know that the content is exactly what it's supposed to be |
| 00:09.51 | awelux__ | because I wrote this: |
| 00:09.53 | awelux__ | <PROTECTED> |
| 00:09.53 | awelux__ | <PROTECTED> |
| 00:09.54 | awelux__ | <PROTECTED> |
| 00:10.00 | awelux__ | always the same address ;) |
| 00:10.01 | cr2 | ok. |
| 00:11.32 | awelux__ | I'm running into a wall here. |
| 00:11.55 | awelux__ | It's completely unclear why the system stopped the execution. |
| 00:13.03 | cr2 | hmm. when you are running without mmu, what about cached/uncached addresses ? |
| 00:14.41 | awelux__ | good idea. |
| 00:15.03 | awelux__ | in the asm I should invalidate the cache. |
| 00:15.12 | awelux__ | I mean the haret asm |
| 00:15.33 | awelux__ | But maybe I don't ionvalidate all of it. |
| 00:16.21 | cr2 | i think it is switched off. or should be switched off, because it is a requirement for the bootloaders. |
| 00:18.40 | awelux__ | at least when switching off the mmu a cache could cause trouble. Accroding to the asm comments it's switched off |
| 00:19.24 | cr2 | i'm really wondering why universal "just works". |
| 00:19.45 | awelux__ | he. yes. |
| 00:20.12 | awelux__ | Maybe something that is attached to the asic3 that can be switched off for the universal and not for the magician ? |
| 00:21.04 | cr2 | asic3 makes things even more complex. |
| 00:21.25 | awelux__ | it's one of the few differences. |
| 00:21.26 | cr2 | at least there is no external dma like on bluenagle and himalaya. |
| 00:22.00 | awelux__ | ?!?!? |
| 00:22.06 | awelux__ | it stopped again |
| 00:22.22 | awelux__ | and at the same point |
| 00:22.50 | cr2 | i was expecting magician to work, because it has minimum of external hardware. |
| 00:24.08 | cr2 | let's think what hardware do we have. |
| 00:24.40 | cr2 | camera is off. |
| 00:24.55 | awelux__ | camera, keys, bluetooth, ir, usb, |
| 00:25.13 | cr2 | ssp2 - touchscreen is off |
| 00:25.21 | awelux__ | touchscreen, audio |
| 00:25.35 | awelux__ | I could switch off audio |
| 00:26.01 | cr2 | pwm0 - probably the brightness. it can't be off ? |
| 00:26.31 | awelux__ | yes. brightness is on |
| 00:26.51 | cr2 | ok. #SDCS2,3 - what is that ? |
| 00:27.47 | cr2 | the rest is harmless. |
| 00:28.55 | cr2 | alpine has the same setup. |
| 00:30.16 | cr2 | unused on universal. |
| 00:31.09 | cr2 | unused on beetles. good. |
| 00:32.03 | awelux__ | pd 0x48000050 4 |
| 00:32.03 | awelux__ | 48000050 | ffffffff |
| 00:32.09 | awelux__ | could this be right ? |
| 00:32.32 | cr2 | what is at 48000050 ? |
| 00:33.27 | awelux__ | System Memory Buffer Strength Control Register 1 (BSCNTR1) |
| 00:33.35 | awelux__ | DQM32BS DQM10BS SDCS32BS SDCS10BS WEBS OEBS SDCAS_DE |
| 00:33.36 | awelux__ | LAY RDnWRBS |
| 00:33.46 | awelux__ | or did you mean something else ? |
| 00:34.03 | awelux__ | SDCS32BS SDCS<3:2> Buffer Strength Control register |
| 00:35.09 | cr2 | gpio20 and 21 alternative function. |
| 00:35.23 | awelux__ | oh |
| 00:35.52 | awelux__ | 20 O 1 1 |
| 00:35.57 | awelux__ | 21 O 1 1 |
| 00:37.24 | awelux__ | maybe I will try again with SD removed |
| 00:38.46 | awelux__ | ... it stopped there again ?!? |
| 00:41.40 | awelux__ | now it stopped at 0xa003e0b8 |
| 00:41.56 | awelux__ | very close to the 0xa003e0a0 from before. |
| 00:45.38 | awelux__ | writing to 0xa0167548. Maybe I did a bit mistake treading it and it's writing to the same address. |
| 00:48.05 | awelux__ | hmm. |
| 00:48.08 | awelux__ | did I break it? |
| 00:48.15 | awelux__ | soft reset as usual |
| 00:48.32 | awelux__ | uploaded the zImage again. |
| 00:48.57 | awelux__ | started to uncompress and it stopped at the exact same address again. |
| 00:50.00 | cr2 | strange... |
| 00:50.33 | awelux__ | that should rule out a random interrupt or something like that |
| 00:51.37 | awelux__ | I can do a little more |
| 00:56.37 | awelux__ | maybe a signed/unsigned bug. |
| 00:57.14 | awelux__ | and it doesn't work because I've an unfortunate kernel image gzip. |
| 00:57.40 | awelux__ | But it's more likely that something is writing into a memory location causing the gzip to fail. |
| 00:57.57 | awelux__ | In this case it would write somewhere into the lower memory. |
| 00:58.44 | awelux__ | around the 0xa003e0a0 |
| 01:00.40 | cr2 | the jornada820 CVS has a hack to load the kernel at +2MB RAM to avoid exactly such problem. |
| 01:01.14 | cr2 | it was USB ohci host making trouble. |
| 01:01.21 | awelux__ | sounds promissing |
| 01:02.14 | cr2 | you can look at it. i need some sleep. good night. |
| 01:02.30 | awelux__ | me too |
| 01:02.32 | awelux__ | gn8 |
| 01:04.42 | awelux__ | ... |
| 01:05.47 | awelux__ | I just started boot2 with a default.txt instead of telnet. |
| 01:05.52 | awelux__ | doesn't work |
| 01:06.39 | awelux__ | but now the green led is flashing even thought nothing else works. |
| 01:07.27 | awelux__ | the battery part seams to be quite isolated from the rest. |
| 01:07.46 | awelux__ | It was decompressing the full kernel btw. |
| 01:08.03 | awelux__ | I had flight mode switched off (instead of on) |
| 01:08.13 | awelux__ | Loaded solitair before doing anything |
| 01:08.27 | awelux__ | And didn't use USB |
| 01:08.54 | awelux__ | now without usb and flight mode on |
| 01:09.03 | awelux__ | and then sleeping |
| 01:09.37 | awelux__ | .. flight mode on/off makes a difference |
| 01:10.13 | awelux__ | good night. The 2mb hack sounds really promissing now. |
| 07:01.12 | *** join/#htc-blueangel rob_w|mis (n=rob_w@p213.54.197.3.tisdip.tiscali.de) |
| 07:40.12 | *** join/#htc-blueangel jeanseb (i=jeanseb@ipv4.sabine-et-benoit.com) |
| 08:02.52 | jeanseb | hello ! |
| 08:23.53 | *** join/#htc-blueangel awelux_ (n=awelux__@dslb-084-058-166-028.pools.arcor-ip.net) |
| 09:28.36 | *** join/#htc-blueangel rob_w (n=bob@p213.54.197.3.tisdip.tiscali.de) |
| 09:28.36 | *** mode/#htc-blueangel [+o rob_w] by ChanServ |
| 14:34.19 | cr2 | downloaded the gpe build tree. |
| 14:35.59 | cr2 | man, not only the file selection box looks like shit, but it is also infected by this microsft patented mono dot.NYET crap... |
| 14:37.02 | cr2 | i will 100% switch to opie from now on. |
| 14:38.49 | cr2 | qpegps is ok, roadmap has qte port, it is necessary to bring qomunicator in good shape. |
| 14:40.45 | jeanseb | grrr |
| 14:40.59 | jeanseb | ms dev kit is free DL ... but need a serial ! |
| 14:41.41 | cr2 | i don't buy into free DL. that's why i have ported haret to gcc. |
| 14:43.23 | jeanseb | yes but at work i got xp :D |
| 14:46.03 | cr2 | i have a fun idea for you. allocate an array in the framebuffer, and then fill it with pfns from GetKPhys, sort them, print out the biggest contiguous block. |
| 14:47.07 | jeanseb | framebuffer ? tux video one or another one ? |
| 14:47.40 | cr2 | the video memory. |
| 14:48.42 | jeanseb | so same as linux but under ce |
| 14:48.48 | cr2 | when you are stealing the pages from the wince kernel you need to put the pointers somewhere. video memory is a good choice, if it will not be overwritten ;) |
| 14:49.35 | jeanseb | my idea was freeing page at low physical adress, and allocate them under CE |
| 14:49.45 | jeanseb | then run linux with limited memory |
| 14:50.14 | jeanseb | so linux could be boot any time you want |
| 14:50.25 | jeanseb | without hurting CE |
| 14:50.40 | jeanseb | and back to ugly CE till linux 100% funtcional |
| 14:51.14 | cr2 | but wince occupies some set of pages, which can be very fragmented. |
| 14:51.52 | cr2 | how are you going to force wince to give (at least some) of them up ? |
| 14:52.16 | jeanseb | the idea was walk the struct not calling system call |
| 14:52.38 | jeanseb | The difficulty will be to find struct that define page status |
| 14:52.47 | cr2 | well, you can stop wince at any moment. |
| 14:52.57 | jeanseb | then we could steal or move them as we want ! |
| 14:52.58 | cr2 | and walk through the page table. |
| 14:53.24 | cr2 | ok. but where will you put the "permutation" index ? |
| 14:54.10 | cr2 | with such logic you can just save these pages on the SD card, and then restore them on reboot. |
| 14:54.35 | jeanseb | permutation ? |
| 14:54.47 | cr2 | you still need to restore the pxa peripherals state. |
| 14:55.03 | cr2 | an array of used pages. |
| 14:55.40 | cr2 | and other peripherals, too. |
| 14:56.33 | cr2 | i will better spend my time on making linux working with the hardware. |
| 14:57.09 | jeanseb | i think too |
| 14:57.27 | jeanseb | for peripherals soft reset will reinit them |
| 14:58.08 | jeanseb | memory i think there is already a param that says the kernel the amount of meme |
| 14:58.13 | jeanseb | memory to use |
| 14:58.30 | jeanseb | just put it to the "reserved" memory size |
| 14:58.51 | jeanseb | so just have to soft reset nothing to restore |
| 14:58.56 | jeanseb | and the i worko n wifi support |
| 14:59.06 | cr2 | just think about the LCD state |
| 14:59.21 | cr2 | there are a lot of people working on wifi now. |
| 14:59.36 | cr2 | because the same chipset is used on all htc pxa phones. |
| 14:59.48 | cr2 | and htc pdas. |
| 15:00.02 | jeanseb | yes but i need wifi and phone to get rid of ce |
| 15:00.08 | jeanseb | so first for me :D |
| 15:00.19 | cr2 | what phone do you have ? |
| 15:00.22 | jeanseb | LCD ? |
| 15:00.30 | jeanseb | SPV 2000 |
| 15:00.40 | cr2 | hmm. blueangel ? |
| 15:00.57 | jeanseb | yes |
| 15:01.01 | jeanseb | QTEK 9090 |
| 15:01.06 | cr2 | ok. |
| 15:01.39 | jeanseb | bye |
| 15:01.42 | jeanseb | maison time |
| 15:01.52 | cr2 | bye |
| 18:07.27 | awelux_ | I would still suggest to get a sd card and a good backup program. |
| 18:07.41 | awelux_ | Then you can go back to win when you need the phone |
| 18:07.47 | awelux_ | oh gone already |
| 18:07.49 | awelux_ | hi cr2 |
| 18:08.00 | awelux_ | Did you read what I found out yesturday evening? |
| 18:08.38 | awelux_ | it depends on flight mode on/off if it's decompressing the kernel. |
| 18:09.01 | awelux_ | I noticed the magician and xdaII have this D751992 GSM cpu. |
| 18:09.17 | awelux_ | I guess we don't have a datasheet for that? |
| 18:11.34 | cr2 | hi awelux |
| 18:11.41 | awelux_ | My interpretation of all this is that this gsm cpu is using a part of the memory |
| 18:11.54 | cr2 | you mean, the gsm is messing with the memory ? |
| 18:11.58 | awelux_ | And we would have to switch it off via i2c |
| 18:12.01 | cr2 | but by what means ? |
| 18:12.12 | awelux_ | yes. Since the only change was flight mode on/off |
| 18:12.26 | awelux_ | maybe it's writing a lot of zeros or so into the memory if switched off. |
| 18:12.44 | awelux_ | And that messes up gzip when it tries to decode these blocks |
| 18:13.02 | cr2 | on universal there is a 0xe0* area which has unknown purpose. |
| 18:13.37 | cr2 | you mean the GSM DRAM is activated by SDCS2/3 ? |
| 18:13.57 | awelux_ | SDCS2/3 is the I2C bus? |
| 18:14.02 | cr2 | no. |
| 18:14.22 | cr2 | you can switch off the i2c clock in CKEN. |
| 18:14.30 | awelux_ | Sometimes these devices are controlled over a i2c bus. |
| 18:14.40 | cr2 | btw, i have a newer version of haret. can you run it ? |
| 18:14.45 | awelux_ | They are setup via i2c. |
| 18:15.01 | awelux_ | cr2, I could try but I doubt it will make a difference. |
| 18:15.08 | awelux_ | And I don't get my debug info |
| 18:15.27 | cr2 | not for booting. for dumping pxa27x info |
| 18:15.38 | cr2 | gnuharet-200602271914.exe |
| 18:15.38 | awelux_ | ok |
| 18:15.42 | cr2 | in files/haret |
| 18:15.54 | awelux_ | I'm planning to let linux ignore the lower 1MB |
| 18:16.15 | awelux_ | I guess the change is in the machine settings of the universal.c file |
| 18:16.37 | awelux_ | And haret. |
| 18:16.43 | cr2 | ok. i am interested in the "dump wince" and "dump pxa27x" output. |
| 18:16.48 | awelux_ | ok |
| 18:17.01 | awelux_ | But let me have a few minutes firs. Just came home. |
| 18:17.07 | cr2 | btw. do you have your haret changes somewhere ? |
| 18:17.27 | cr2 | ok. |
| 18:17.40 | awelux_ | not yet. I can build a tarball |
| 18:18.15 | cr2 | i want to clean the code, add some featuresand put it into CVS. |
| 18:18.44 | cr2 | i want asic3 watch and command history. then it will be very good. |
| 18:25.41 | awelux_ | can you accept this tarball ? |
| 18:27.17 | cr2 | you can try. |
| 18:27.36 | awelux_ | I just tried to send the file via dcc |
| 18:28.02 | awelux_ | I got a server complain about a spam problem.รถ |
| 18:28.06 | awelux_ | so maybe it didn't work |
| 18:28.22 | cr2 | well. can you upload it somewhere ? |
| 18:28.44 | cr2 | we can do it later. |
| 18:29.01 | cr2 | try "dump wince" and "dump pxa27x" |
| 18:29.09 | cr2 | i have a new idea |
| 18:33.10 | awelux_ | hmm. I can't open a priovate message to you |
| 18:33.23 | awelux_ | should I dump the output into the main channel? |
| 18:33.33 | awelux_ | or should we go to a new channel for that? |
| 18:34.52 | cr2 | no idea. |
| 18:34.58 | awelux_ | on |
| 18:34.58 | awelux_ | <PROTECTED> |
| 18:34.58 | awelux_ | <PROTECTED> |
| 18:34.58 | awelux_ | <PROTECTED> |
| 18:34.58 | awelux_ | <PROTECTED> |
| 18:34.58 | awelux_ | <PROTECTED> |
| 18:35.01 | awelux_ | <PROTECTED> |
| 18:35.02 | awelux_ | <PROTECTED> |
| 18:35.04 | awelux_ | <PROTECTED> |
| 18:35.07 | awelux_ | <PROTECTED> |
| 18:35.08 | awelux_ | <PROTECTED> |
| 18:35.10 | awelux_ | <PROTECTED> |
| 18:35.13 | awelux_ | <PROTECTED> |
| 18:35.14 | awelux_ | oh |
| 18:35.16 | awelux_ | HaRET(1)# dump wince |
| 18:35.19 | awelux_ | Wince information |
| 18:35.20 | awelux_ | curr_perm: 00020001, memdiv: rdisk= 7348 ram= 7348 pagesize= 4096 |
| 18:35.24 | awelux_ | OEMINFO: P |
| 18:35.27 | awelux_ | OEMINFO: PM10B |
| 18:35.29 | awelux_ | PLATFORMTYPE: P |
| 18:35.31 | awelux_ | PLATFORMTYPE: PocketPC |
| 18:35.33 | awelux_ | machine_id:875 |
| 18:35.34 | awelux_ | audio_innum=1, audio_outnum=1 |
| 18:35.36 | awelux_ | ps: pid=13fff002 ppid=0 pmem=c2000000 hand=13fff002 procname=N |
| 18:35.38 | awelux_ | ps: pid=13fff002 ppid=0 pmem=c2000000 hand=13fff002 procname=NK.EXE |
| 18:35.40 | awelux_ | ps: pid=d3fe9262 ppid=0 pmem=4000000 hand=d3fe9262 procname=f |
| 18:35.42 | awelux_ | ps: pid=d3fe9262 ppid=0 pmem=4000000 hand=d3fe9262 procname=filesys.exe |
| 18:35.44 | awelux_ | ps: pid=f3d29436 ppid=0 pmem=6000000 hand=f3d29436 procname=g |
| 18:35.47 | awelux_ | ps: pid=f3d29436 ppid=0 pmem=6000000 hand=f3d29436 procname=gwes.exe |
| 18:35.49 | awelux_ | ps: pid=d3fabf6a ppid=0 pmem=8000000 hand=d3fabf6a procname=d |
| 18:35.51 | awelux_ | ps: pid=d3fabf6a ppid=0 pmem=8000000 hand=d3fabf6a procname=device.exe |
| 18:35.54 | awelux_ | ps: pid=33c87206 ppid=0 pmem=a000000 hand=33c87206 procname=s |
| 18:35.56 | awelux_ | ps: pid=33c87206 ppid=0 pmem=a000000 hand=33c87206 procname=services.exe |
| 18:35.59 | awelux_ | ps: pid=d3cb2d56 ppid=0 pmem=c000000 hand=d3cb2d56 procname=s |
| 18:36.00 | awelux_ | ps: pid=d3cb2d56 ppid=0 pmem=c000000 hand=d3cb2d56 procname=shell32.exe |
| 18:36.02 | awelux_ | ps: pid=932d2f2e ppid=0 pmem=e000000 hand=932d2f2e procname=r |
| 18:36.05 | awelux_ | ps: pid=932d2f2e ppid=0 pmem=e000000 hand=932d2f2e procname=rapisrv.exe |
| 18:36.06 | awelux_ | ps: pid=93cbc70a ppid=0 pmem=10000000 hand=93cbc70a procname=c |
| 18:36.08 | awelux_ | ps: pid=93cbc70a ppid=0 pmem=10000000 hand=93cbc70a procname=connmgr.exe |
| 18:36.10 | awelux_ | ps: pid=b3c98f32 ppid=0 pmem=12000000 hand=b3c98f32 procname=s |
| 18:36.13 | awelux_ | ps: pid=b3c98f32 ppid=0 pmem=12000000 hand=b3c98f32 procname=srvtrust.exe |
| 18:36.14 | awelux_ | ps: pid=f3d3c2a6 ppid=0 pmem=14000000 hand=f3d3c2a6 procname=X |
| 18:36.16 | awelux_ | ps: pid=f3d3c2a6 ppid=0 pmem=14000000 hand=f3d3c2a6 procname=XCPCSyncSvr.exe |
| 18:36.18 | awelux_ | ps: pid=f375965a ppid=0 pmem=16000000 hand=f375965a procname=S |
| 18:36.20 | awelux_ | ps: pid=f375965a ppid=0 pmem=16000000 hand=f375965a procname=STK.exe |
| 18:36.24 | awelux_ | ps: pid=9381247e ppid=0 pmem=18000000 hand=9381247e procname=G |
| 18:36.26 | awelux_ | ps: pid=9381247e ppid=0 pmem=18000000 hand=9381247e procname=GPRSNotify.exe |
| 18:36.28 | awelux_ | ps: pid=b38bfc2a ppid=0 pmem=1a000000 hand=b38bfc2a procname=c |
| 18:36.30 | awelux_ | ps: pid=b38bfc2a ppid=0 pmem=1a000000 hand=b38bfc2a procname=cprog.exe |
| 18:36.32 | awelux_ | ps: pid=532edf16 ppid=0 pmem=1c000000 hand=532edf16 procname=E |
| 18:36.34 | awelux_ | ps: p |
| 18:36.36 | awelux_ | ps: pid=532edf16 ppid=0 pmem=1c000000 hand=532edf16 procname=Explorer.exe |
| 18:36.38 | awelux_ | ps: pid=13771852 ppid=0 pmem=1e000000 hand=13771852 procname=p |
| 18:36.40 | awelux_ | ps: pid=13771852 ppid=0 pmem=1e000000 hand=13771852 procname=poutlook.exe |
| 18:36.42 | awelux_ | ps: pid=92f25fba ppid=0 pmem=20000000 hand=92f25fba procname=r |
| 18:36.44 | awelux_ | ps: pid=92f25fba ppid=0 pmem=20000000 hand=92f25fba procname=repllog.exe |
| 18:36.46 | awelux_ | ps: pid=1375906a ppid=0 pmem=22000000 hand=1375906a procname=r |
| 18:36.48 | awelux_ | ps: pid=1375906a ppid=0 pmem=22000000 hand=1375906a procname=rnaapp.exe |
| 18:36.50 | awelux_ | ps: pid=f321820a ppid=0 pmem=24000000 hand=f321820a procname=g |
| 18:36.54 | awelux_ | ps: pid=f321820a ppid=0 pmem=24000000 hand=f321820a procname=gnuharet-200602271914.exe |
| 18:36.56 | awelux_ | ps: pid=1342f776 ppid=0 pmem=26000000 hand=1342f776 procname=t |
| 18:36.58 | awelux_ | ps: pid=1342f776 ppid=0 pmem=26000000 hand=1342f776 procname=tmail.exe |
| 18:37.00 | awelux_ | ----------------- |
| 18:37.02 | awelux_ | FB1: form=1 bpp=16 fbaddr=A8500020/5C000020 x=240/2 y=320/480 |
| 18:37.04 | awelux_ | FB0: form=160 bpp=16 fbaddr=A8500020/5C000020 x=240/480 y=320/480 |
| 18:37.06 | awelux_ | HaRET(2)# dump pxa27x |
| 18:37.08 | awelux_ | Run Mode clock: 104.00MHz (*8) |
| 18:37.10 | awelux_ | Turbo Mode clock: 416.00MHz (*4.0, inactive) |
| 18:37.12 | awelux_ | Memory clock: 104.00MHz (/1) |
| 18:37.14 | awelux_ | System bus clock: 104.00MHz |
| 18:37.16 | awelux_ | memclk_frequency_10khz: 10400 |
| 18:37.18 | awelux_ | lcdlck_frequency_10khz: 5200 |
| 18:37.20 | awelux_ | lcdlck_pixclock: 153846 pcd=4 |
| 18:37.24 | awelux_ | pxa27x: lccr0=0x04000081 lccr3=0x04400004 lccr4=0x00000000 |
| 18:37.26 | awelux_ | <PROTECTED> |
| 18:37.28 | awelux_ | <PROTECTED> |
| 18:37.30 | awelux_ | <PROTECTED> |
| 18:37.32 | awelux_ | <PROTECTED> |
| 18:37.34 | awelux_ | <PROTECTED> |
| 18:37.36 | awelux_ | <PROTECTED> |
| 18:37.38 | awelux_ | <PROTECTED> |
| 18:37.40 | awelux_ | <PROTECTED> |
| 18:37.42 | awelux_ | <PROTECTED> |
| 18:37.44 | awelux_ | <PROTECTED> |
| 18:37.46 | awelux_ | <PROTECTED> |
| 18:37.48 | awelux_ | <PROTECTED> |
| 18:37.50 | awelux_ | <PROTECTED> |
| 18:37.54 | awelux_ | <PROTECTED> |
| 18:37.56 | awelux_ | <PROTECTED> |
| 18:37.58 | awelux_ | <PROTECTED> |
| 18:38.00 | awelux_ | <PROTECTED> |
| 18:38.02 | awelux_ | <PROTECTED> |
| 18:38.04 | awelux_ | <PROTECTED> |
| 18:38.06 | awelux_ | <PROTECTED> |
| 18:38.08 | awelux_ | <PROTECTED> |
| 18:38.10 | awelux_ | <PROTECTED> |
| 18:38.12 | awelux_ | <PROTECTED> |
| 18:38.14 | awelux_ | <PROTECTED> |
| 18:38.16 | awelux_ | <PROTECTED> |
| 18:38.19 | awelux_ | <PROTECTED> |
| 18:38.20 | awelux_ | <PROTECTED> |
| 18:38.24 | awelux_ | <PROTECTED> |
| 18:39.57 | cr2 | ok. your machine_id is autodetected, you have 1 mic and 1 speaker. |
| 18:40.30 | cr2 | usb host is on ? |
| 18:43.24 | awelux_ | yes |
| 18:43.59 | awelux_ | do you print the irq mask? |
| 18:45.02 | cr2 | not irq, but the clock |
| 18:45.54 | cr2 | i will suggest to boot from the sd card, and disable SSP2, *UART, USB* I2C, QCIF |
| 18:46.29 | cr2 | you told me yesterday that SSP3 was on. what is that ? sound out ? |
| 19:29.05 | *** join/#htc-blueangel jeanseb (n=jeanseb@lns-bzn-47f-62-147-133-94.adsl.proxad.net) |
| 19:29.52 | jeanseb | hi |
| 19:30.00 | jeanseb | ok got synce working fine now |
| 19:31.24 | jeanseb | cr2, here ? |
| 19:49.02 | *** join/#htc-blueangel immolo (n=immolo@cpc1-cosh1-4-0-cust126.cos2.cable.ntl.com) |
| 22:07.01 | *** join/#htc-blueangel dullard (n=jim@adsl-static-1-30.uklinux.net) |
| 22:16.56 | dullard | cr2, go to www.jamesfenn.co./universal.htm to get your beeper |
| 22:17.03 | dullard | ooops |
| 22:17.10 | dullard | cr2, go to www.jamesfenn.com/universal.htm to get your beeper |
| 22:17.42 | jeanseb | lol |
| 22:17.57 | dullard | I'll be back later... |
| 22:18.01 | jeanseb | dullard good night |
| 22:18.12 | dullard | night jeanseb |
| 22:18.15 | jeanseb | cr2, seem to be out and i go to bed :D |
| 22:30.04 | *** join/#htc-blueangel immolo (n=immolo@cpc1-cosh1-4-0-cust126.cos2.cable.ntl.com) |
| 22:38.50 | *** join/#htc-blueangel immolo (n=immolo@cpc1-cosh1-4-0-cust126.cos2.cable.ntl.com) |
| 22:42.17 | awelux_ | cr2, to boot from pc card? instead of haret ? |
| 22:42.46 | cr2 | how ? |
| 22:43.21 | cr2 | sd card ? |
| 22:43.52 | awelux_ | yes, how. There should be another bootloader then right? |
| 22:44.24 | awelux_ | Do the HTC devices check if there is a bootloader on SD card on a coldstart ? |
| 22:44.45 | cr2 | yes. but it is very spooky. and you need to init everything yourself. you don't know your hardware so good. |
| 22:46.07 | cr2 | try to switch off the clocks to the devices you don't need. |
| 22:47.00 | awelux_ | hmm. ok. I've not read about the clocks yet. brb |
| 22:47.13 | cr2 | search for CKEN |
| 22:47.27 | cr2 | new haret just prints the bits. |
| 22:47.39 | awelux_ | Are the clocks also responsible for the LED flashing green once in a while ? |
| 22:48.21 | awelux_ | I also want to add a check that will compare the copied kernel to the kernel that's still in memory. |
| 22:49.22 | awelux_ | then it should be possible to identify the problem memory areas |
| 22:52.31 | awelux_ | ouch. headache again. I will go backto bed. Maybe I can get some work done tomorrow. |
| 22:53.34 | cr2 | good night. |
| 22:54.46 | awelux_ | thx |