| 00:00.11 | lamikr | Still, same error. |
| 00:01.09 | lamikr | Actually I now also got error also from the AT+CPMS="ME","ME","ME" command. |
| 00:02.08 | lamikr | +CMS ERROR: 302 from that. |
| 00:02.27 | cp15 | Operation not allowed |
| 00:03.11 | lamikr | I do not believe the error is in the pdu code. If I make changes to pdu, module will return "invalid pdu" error code. I also tried to make today an PDU with one windows app I found from the net and I put the gomunicator to send that code instead of using the one gomunicator generates but the error is same. |
| 00:03.35 | lamikr | not allowed... why |
| 00:04.10 | cp15 | Do you have the link for your at documentation handy? |
| 00:05.21 | lamikr | http://www.wavecom.com/media/files/support/Advanced_Software_Solutions/Open_AT/Open_AT_30/Doc-OAT-V3.zip contains at commands for the wavecoms module I have. I think my module may be alittle bit older version but... |
| 00:06.31 | lamikr | I also have tried to send the message in text format instead of pdu format... When I did that I was actually able to hear from my synthetizator that h6300 radio started to work... But also then the message newer came to my wifes phone. |
| 00:07.43 | cp15 | Can you tell me the response to AT+CPMS=? and AT+CPMS? |
| 00:08.42 | cp15 | The last question mark is part of the command, not the question :-) |
| 00:10.43 | lamikr | :-) Yes, I now :-) |
| 00:11.22 | lamikr | AT+CPMS=? anwers: +CPMS: (("SM","BM","SR"),("SM")) |
| 00:12.21 | lamikr | AT+CPMS? answers: +CPMS: "SM",4,20,"SM",4,20 |
| 00:14.06 | cp15 | Hmm... Looks good |
| 00:14.37 | lamikr | at+cpin? is also returning ok |
| 00:16.43 | cp15 | Ok, I guess CMGS is using CMGW and CMSS internally |
| 00:17.49 | lamikr | What are those? |
| 00:18.00 | cp15 | Replace the CMGS with CMGW, and if the reply is +CMGW: <number> write down the number and issue a AT+CMSS=<number> or AT+CMSS=<number>,<SMSC> |
| 00:18.13 | cp15 | CMGW: Write message to storage |
| 00:18.26 | cp15 | CMSS: Send message from storage |
| 00:18.56 | cp15 | Also try a AT+CPMS? again after CMGW to see if the counter increases |
| 00:21.16 | lamikr | So, I need to call "AT+CMGW=<pdu_length/2>" ? |
| 00:21.24 | cp15 | Yes |
| 00:28.21 | lamikr | Hmm, after the pdu was sent, I got to log: processReadLine('+CMGW: 5',8) |
| 00:28.33 | lamikr | and Unknown Reply '+CMGW: 5' |
| 00:28.56 | cp15 | Ok, then the pdu is now stored on your sim card |
| 00:29.05 | cp15 | Try AT+CMSS=5 |
| 00:30.14 | lamikr | +CMS ERROR: 21 :-( |
| 00:32.48 | *** join/#htc-blueangel iclem (n=iclem@iclem.net) |
| 00:34.34 | cp15 | Hmm... Now I am a bit out of ideas |
| 00:36.39 | lamikr | One thing came to my mind... I have turned off the multiplexing so that I can communicate with the module... I just found following text from that command. |
| 00:38.18 | lamikr | 0: multiplexing disabled. When the product is online, (data communication in progress) no at commands can be used. (default) |
| 00:38.51 | lamikr | Could that be that I need to turn the data connection somehow off, so that AT commands can really send the sms message? |
| 00:40.29 | lamikr | ATI7 |
| 00:40.39 | cp15 | Don't think so |
| 00:41.20 | lamikr | ok... Thanks anyway for trying to help. |
| 00:42.27 | cp15 | I will go to bed now, maybe I have a good idea tomorrow |
| 00:43.06 | cp15 | Good night |
| 00:43.25 | lamikr | I need also go, I am almost sleeping. Slept 3,5 hour last night ... |
| 00:43.27 | lamikr | good night |
| 00:59.11 | *** join/#htc-blueangel llange (n=llange@lange.nom.fr) |
| 01:02.01 | llange | Hello... does anyone know if I can find information about the ASIC5 (Himalaya only it seems...) ? |
| 01:09.36 | llange | btw : I must report that the Himalaya is now able to use USBnet, so I was able to boot a recent familiar image via NFS and play with some (nice and graphical) programs. |
| 05:00.21 | *** join/#htc-blueangel magnet (n=magnet@vsg94-1-82-234-118-20.fbx.proxad.net) |
| 06:03.31 | *** join/#htc-blueangel JuNuKN (n=JuNuKN@K98da.k.pppool.de) |
| 08:45.03 | *** join/#htc-blueangel TelePuzik (n=UNIX@80.81.39.150) |
| 09:03.57 | *** join/#htc-blueangel bwegh (n=bwegh@p54A32A3E.dip0.t-ipconnect.de) |
| 09:04.17 | bwegh | morning boys and girls |
| 09:07.47 | bwegh | oh damn it ... a broken pixel :( |
| 09:14.24 | *** join/#htc-blueangel _cronos_ (n=cronos@81.56.243.252) |
| 09:18.01 | *** join/#htc-blueangel cp15 (i=otuweh@p549A030E.dip0.t-ipconnect.de) |
| 09:18.02 | *** mode/#htc-blueangel [+o cp15] by ChanServ |
| 09:18.08 | cp15 | Good morning |
| 09:25.25 | bwegh | morning, cp |
| 09:25.40 | bwegh | cp15: i got a ba again ;) |
| 09:27.51 | bwegh | but it has a broken pixel, do you know how many broken pixels a ba is allowed to have, cp15 ? |
| 09:28.43 | cp15 | Hmm... Don't think there is any rule, but your one is the first I have heard of |
| 09:29.11 | bwegh | its a nice green pixel ... pretty annoing with black! |
| 09:29.32 | cp15 | Probably asking the service hotline couldn't harm |
| 09:29.56 | bwegh | yeah, ill try it |
| 09:41.02 | *** join/#htc-blueangel oho_ (n=phil@81-179-84-81.dsl.pipex.com) |
| 09:41.11 | oho_ | Good morning |
| 09:44.47 | *** join/#htc-blueangel rob_w (n=bob@p85.212.172.226.tisdip.tiscali.de) |
| 09:44.47 | *** mode/#htc-blueangel [+o rob_w] by ChanServ |
| 09:44.53 | cp15 | Good morning |
| 09:45.06 | oho_ | Good morning |
| 09:45.09 | oho_ | Hi cp15 |
| 09:48.03 | cp15 | Hi oho_ |
| 10:04.13 | bwegh | mornig oho and rob_w |
| 10:17.41 | oho_ | Hi bwegh |
| 10:26.39 | cp15 | Good news everyone... I managed to get the standby current down from 80mA to 9mA |
| 10:29.29 | cp15 | Not yet perfect, but acceptable... |
| 10:29.52 | cp15 | But still some problems after wakeup... Touching the touchscreen will hang the system :-) |
| 10:32.34 | bwegh | wow, cp15 that sounds very good! |
| 10:32.41 | bwegh | lol |
| 10:33.53 | bwegh | cp15: do you know anything new about the usb-net problem (you have to be connected with the pc in windows to use it in linux) |
| 10:35.00 | cp15 | I know the reason, but not who causes it |
| 10:35.22 | cp15 | There is a "usb clock enable bit" in the pxa |
| 10:35.22 | bwegh | what is the reason? |
| 10:35.56 | cp15 | It gets reset whithin linux for some unknown reason during the boot, but only if usb isn't connected |
| 10:36.19 | bwegh | isnt there a way to set it again? |
| 10:36.58 | cp15 | Sure, if you have a serial cable, you can login, set the bit, rmmod g_ether and pxa2xx_udc and modprobe g_ether |
| 10:37.07 | cp15 | But I will look for a cleaner solution |
| 10:37.32 | bwegh | or you use the root-terminal within gpe |
| 10:38.28 | cp15 | Yes, should work too |
| 10:39.00 | bwegh | could it be a power issue - something like "we switch it off if not connected to save power"? |
| 10:39.35 | cp15 | Maybe |
| 10:39.47 | cp15 | But it should switch on itself when usb is connected |
| 10:39.53 | cp15 | Ah... I will make a try |
| 10:41.08 | bwegh | sounds like a light switched on ;) |
| 10:44.03 | bwegh | btw: does anyone know a good pc hardware distributor (cheap and good!) |
| 10:44.07 | bwegh | germany |
| 10:44.48 | cp15 | Ok, the problem is: When usb is not connected while loading pxa2xx_udc, it will never work |
| 10:45.14 | cp15 | So you don't have to fiddle with the clock register, just unload the two modules and load g_ether |
| 10:45.26 | cp15 | (the other one will get loaded automatically) |
| 10:45.45 | cp15 | Maybe you also need an ifup usb0 |
| 10:49.26 | bwegh | well a "auto usb0" in /etc/network/interfaces should do the work, shouldnt it? |
| 10:51.00 | cp15 | I thought also, but in my case it doesn't work |
| 10:51.07 | bwegh | i see |
| 10:52.52 | bwegh | maybee becaus g_ether isnt able to load pxa2xx_udc when not connected and putting it in the cradle does nothing becaus pxa2xx_udc isnt loaded |
| 10:53.16 | bwegh | recursive dependency |
| 11:22.22 | *** join/#htc-blueangel JuNuKN (n=JuNuKN@Kb678.k.pppool.de) |
| 12:02.54 | *** join/#htc-blueangel llange_away (n=llange@lange.nom.fr) |
| 12:15.18 | TelePuzik | Hi Guys |
| 12:15.23 | TelePuzik | anything new to test? |
| 12:17.30 | *** join/#htc-blueangel iclem (n=iclem@iclem.net) |
| 12:17.33 | cp15 | Not yet |
| 13:30.01 | bwegh | cp15: are you already able to get the positioning data from the gsm signals? one could provide a positioning system with it |
| 13:31.16 | cp15 | You mean the o2 cell broadcast? |
| 13:31.44 | bwegh | yes |
| 13:32.49 | cp15 | Can't test it, since I don't have a o2 sim card |
| 13:33.02 | cp15 | But I guess cell broadcast should work |
| 13:45.24 | oho_ | bwegh: I looked into that once and you can only get a very poor acuracy with GSM singnals. |
| 13:46.04 | bwegh | oho_: thats sad ... would have been cool ;) |
| 13:46.22 | oho_ | There is a paper by some guys from Canada which explains how to use additional parts of the GSM to get a better acuracy. |
| 13:46.31 | oho_ | but they use special hardware |
| 13:46.56 | bwegh | then i can buy a gsm antenna, too |
| 13:47.51 | oho_ | if we manage to get all "seen" base stations - which not all GSM hardware tells you about we could get a reasonable acuracy |
| 13:48.04 | oho_ | my plan was to look into that at one point |
| 13:48.24 | oho_ | tomorrow I will work a bit more on the gomunicator |
| 13:48.34 | bwegh | sounds good, oho_ |
| 13:48.40 | bwegh | gtg |
| 13:48.41 | oho_ | but I am off now, see you later guys |
| 13:48.44 | bwegh | see you |
| 15:22.42 | lamikr | Hi cp15 |
| 15:23.00 | cp15 | Hi lamikr |
| 15:23.51 | lamikr | I have tryed to send today multible SMS messages, and just noticed that one of them has even went... Now I just need to figure out what was the code compination :-) |
| 15:25.31 | cp15 | I am sure you will find out |
| 15:30.11 | lamikr | Yes... I need to now be offline, but I will be back and then work with it. I believe the message went throught when I send it all in one sequence. (AT+CMGS=<length><cr><pdu><ctrl-z>) |
| 15:31.23 | cp15 | Interesting |
| 16:54.06 | *** join/#htc-blueangel rob_w (n=bob@p85.212.172.226.tisdip.tiscali.de) |
| 16:54.07 | *** mode/#htc-blueangel [+o rob_w] by ChanServ |
| 17:03.17 | *** join/#htc-blueangel rob_w_tablet (n=bob@p85.212.172.226.tisdip.tiscali.de) |
| 17:06.50 | iclem | hi llange |
| 17:06.59 | llange | hi iclem |
| 17:07.16 | oho_ | hi iclem and llange |
| 17:07.35 | llange | hi everybody ! |
| 17:07.37 | rob_w_tablet | hi all |
| 17:07.51 | oho_ | hi rob_w |
| 17:09.03 | iclem | llange, I've applied your patch, kernel compliles well |
| 17:09.09 | iclem | but do not boot :( |
| 17:09.27 | llange | Ooops. :-) Nothing on the screen ? |
| 17:10.03 | rob_w_tablet | llange: working on the himalaya ? |
| 17:10.10 | llange | I'm using serial port to debug, may be you should tweak the .config to include screen (lcd, ...) |
| 17:10.13 | iclem | no. maybe there are some other thnigs to enable in himalaya defconfig? |
| 17:10.37 | llange | rob_w : still... well trying to reverse ASIC5 stuff but.. long way to go. |
| 17:10.51 | llange | I need my SD card access :-) |
| 17:10.57 | cp15 | llange: Can you give a little progress report? |
| 17:11.07 | llange | yes with pleasure : |
| 17:11.27 | llange | kernel boot. leds are controlable. touchscreen works. lcd works. |
| 17:11.35 | llange | USB works. serial also. |
| 17:11.44 | llange | able to mount and boot a NFS root. |
| 17:12.00 | rob_w_tablet | sounds good |
| 17:12.02 | llange | buttons works 90%. |
| 17:12.18 | cp15 | 90% of time or 90% of buttons? |
| 17:12.19 | llange | (still a problem with the keypad 'enter'). |
| 17:12.28 | cp15 | Ok |
| 17:12.41 | llange | it randomly gets stuck, either pressed or released. |
| 17:12.56 | llange | the wiring of the keypad is very, very strange. |
| 17:13.05 | llange | (so is my code :-) ) |
| 17:13.28 | cp15 | Yeah, I am also currently busy cleaning up some of my early sins :-) |
| 17:13.49 | llange | =) |
| 17:14.08 | cp15 | Have you used the w100fb or vsfb? |
| 17:14.25 | llange | iclem: what is your .config like ? |
| 17:14.26 | llange | cp15: w100fb |
| 17:14.32 | llange | didn't know about vsfb. |
| 17:14.44 | cp15 | Oh, nice, this is already a huge progress |
| 17:15.22 | cp15 | vsfb=Very Simple FrameBuffer... A framebuffer which only needs address, resolution and screen memory format to work |
| 17:16.11 | llange | it was easy because the platform is so close to the blueangel... however, now that I'm dealing with SDram (something very different between BlueAngel and Himalaya), it's a completly different thing =) |
| 17:16.33 | cp15 | SDram? |
| 17:16.45 | llange | SD card sorry. |
| 17:16.51 | llange | SD, SDIO, MMC, ... |
| 17:17.14 | cp15 | Are you sure it is that different? Himalaya also uses ASIC3 which contains a complete SD/SDIO interface |
| 17:18.06 | llange | I'm not sure, but I refer to some previous research (wiki, IRC logs, ...) that seems to imply that. plus the fact that I could'nt get the ASIC3 driver running =) |
| 17:18.38 | cp15 | You need to find out the correct interrupt line, without it nothing works |
| 17:23.01 | llange | Here is what the wiki says : http://wiki.xda-developers.com/index.php?pagename=HimalayaSDcard (I'm not sure how far I can trust ...) |
| 17:23.14 | iclem | llange, my .config http://iclem.net/tmp/config.txt, just compiled => no display, nor usb reaction |
| 17:23.29 | cp15 | llange: Have seen it |
| 17:24.41 | llange | iclem: you don't have serial do you ? |
| 17:25.07 | llange | the .config looks ok. LCD is compiled in the kernel... |
| 17:26.01 | llange | I'm trying to compile my kernel with this .config. |
| 17:27.05 | cp15 | iclem: Have you set the correct machine type in startup.txt? |
| 17:27.54 | iclem | MTYPE 766 ? |
| 17:28.16 | cp15 | No |
| 17:28.22 | cp15 | 766 is for blueangel |
| 17:29.00 | cp15 | You need 448 (llange: correct me if I am wrong) |
| 17:31.00 | iclem | cp15, it's right, checked on himalayalinuxbooting. I was using a blueangel startup.txt |
| 17:32.27 | llange | cp15: 448 is the way to go |
| 17:32.28 | llange | iclem: Here is a recent patch : http://himalaya.lange.nom.fr/K2-6-12-hh2-xda0-ba0-himalaya-20051126.diff |
| 17:45.24 | iclem | this hard reset is sooo loong |
| 17:47.31 | cp15 | iclem: Somebody told me you can speed it up with pressing reset before the customization begins |
| 17:47.49 | llange | iclem: screen calibration, tutorial... I modified the extended rom (renamed autorun) to skip customization. no need to reset. |
| 17:48.18 | llange | You have to unlock the rom, unhide it, the rename autorun to another name. |
| 17:48.36 | iclem | cp15: I've tried but i think some important dll are loaded during cutomization |
| 17:48.51 | llange | not for me =) |
| 17:49.09 | llange | g2g, I'll be back later tonight. |
| 17:49.12 | iclem | SD card do work without customization ? |
| 17:49.16 | llange | yes. |
| 17:49.37 | iclem | llange, many thaks, see you |
| 17:49.38 | llange | the device is fully functional, but without the operator colors, programs etc... |
| 17:50.00 | llange | drop me an email with your progress. |
| 17:50.28 | iclem | ok |
| 19:30.52 | *** join/#htc-blueangel xdaIIsuko (i=thambi@203.212.228.203) |
| 19:59.18 | xdaIIsuko | hi anyone here |
| 19:59.36 | xdaIIsuko | i need help upgrading my rom |
| 20:03.02 | cp15 | Hmm... Upgrading to what? |
| 20:03.07 | xdaIIsuko | I could not see Radio Version, protocol Version, ExtROM Version in my xda |
| 20:03.29 | xdaIIsuko | I have installed Windows Mobile 5.0 on this |
| 20:03.36 | xdaIIsuko | when I check the version |
| 20:03.42 | xdaIIsuko | I could see |
| 20:03.55 | xdaIIsuko | ROM Version: 5.03.02 WWE |
| 20:04.05 | xdaIIsuko | ROM Date: 03/02/05 |
| 20:04.18 | xdaIIsuko | I could not make calls with my Sim Card |
| 20:04.58 | xdaIIsuko | It says with Antenna Symbol (!) next to that |
| 20:05.21 | cp15 | I am afraid this is not the right group for you. We are trying to port Linux to HTC devices |
| 20:05.37 | cp15 | But have you already tried to go back to your old level? |
| 20:06.18 | xdaIIsuko | nope, as soon as i bought this i never got a chance to test with the provider |
| 20:06.57 | xdaIIsuko | when i inserted my new SIM Card, it didn't work and I checked with xda-developers forum |
| 20:07.11 | xdaIIsuko | and upgraded to WM 5 edition |
| 20:07.39 | xdaIIsuko | i'm really blank what i had before in my device |
| 20:08.10 | xdaIIsuko | is there is any other room where i can help with regards to my xda IIs ? |
| 20:08.21 | xdaIIsuko | *can get |
| 20:08.55 | cp15 | The xda-deverlopers forum is a good place. Did you get any answers there? |
| 20:09.18 | cp15 | Are you sure your sim card is ok? |
| 20:09.21 | xdaIIsuko | i have tried unlocking it with the unlock software |
| 20:09.41 | xdaIIsuko | when i try my simcard with a nokia phone it is working fine |
| 20:10.16 | xdaIIsuko | i tried with prun xda_unlock_all...exe -f -s too |
| 20:10.23 | cp15 | Have you unlocked it before or after upgrading to WM5? |
| 20:10.38 | xdaIIsuko | no, i tried only after upgrading it to WM5 |
| 20:11.45 | cp15 | Well, I would suggest the following: Pick you favorite rom update and go back to a WM2003SE level |
| 20:12.03 | cp15 | Maybe your radio rom has a problem and this will fix it |
| 20:12.12 | xdaIIsuko | ok |
| 20:12.25 | xdaIIsuko | i will do that right now |
| 20:12.52 | xdaIIsuko | when i try to upgrade to a new radio rom i got country id error |
| 20:12.57 | cp15 | You will see three lines with version numbers when booting... Check if they match to the update |
| 20:13.18 | cp15 | There is a special update programm which ignores this... I will check |
| 20:13.34 | xdaIIsuko | please ... |
| 20:14.14 | cp15 | Take a look at http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Upgrade_Errors |
| 20:14.40 | xdaIIsuko | sure i will go through this |
| 20:16.21 | xdaIIsuko | i checked the RUU.conf file |
| 20:16.32 | xdaIIsuko | and the content of the last line is same as mentioned there |
| 20:21.56 | cp15 | Have you tried to run the update? |
| 20:22.36 | xdaIIsuko | i'm doing it again right now |
| 20:25.18 | xdaIIsuko | i don't have the ms_.bnf file |
| 20:25.33 | xdaIIsuko | do you have any idea where i will get it please |
| 20:25.57 | cp15 | Is your Update a exe file? |
| 20:26.31 | xdaIIsuko | yes |
| 20:26.49 | cp15 | Then you should find it in the temp directory after running the exe file |
| 20:26.49 | xdaIIsuko | BaUpdradeUt.exe |
| 20:27.08 | xdaIIsuko | i had the download in rar format |
| 20:27.23 | cp15 | What was in the rar? |
| 20:28.38 | xdaIIsuko | BaUpgradeUt.exe |
| 20:28.41 | xdaIIsuko | EnterBL.exe |
| 20:28.48 | xdaIIsuko | GetDeviceData.exe |
| 20:28.56 | xdaIIsuko | HTCRUU.conf |
| 20:29.03 | xdaIIsuko | HTCRUU.dll |
| 20:29.11 | xdaIIsuko | only these ones |
| 20:29.55 | cp15 | This is only the update program, not the rom images |
| 20:30.11 | cp15 | Which country is your device? |
| 20:31.12 | xdaIIsuko | O2 UK |
| 20:31.25 | xdaIIsuko | i'm checking the rom images |
| 20:31.35 | cp15 | Then try this one ftp://xda:xda@ftp.xda-developers.com/BlueAngel/Shipped_Complete_Updates/O2_UK_XDAIIs_WWE_14000_237_11200_SHIP/Xda_IIs_Upgrade_v140237.exe |
| 20:33.07 | xdaIIsuko | thanks cp15 |
| 20:37.25 | xdaIIsuko | while update it shows ERROR 120: COUNTRY ID ERROR No-No-22-22-22 |
| 20:38.34 | xdaIIsuko | i added the line in the RUU.conf [CHECKCEID_TYPE] = 1 |
| 20:41.51 | cp15 | Have you already tried to run GetDeviceData? |
| 20:41.56 | cp15 | http://wiki.xda-developers.com/index.php?pagename=GetDeviceData |
| 20:43.05 | xdaIIsuko | yes |
| 20:43.15 | xdaIIsuko | i will get the results for you |
| 20:48.12 | xdaIIsuko | yes |
| 20:48.22 | xdaIIsuko | i could see P H 2 0 B |
| 20:48.30 | xdaIIsuko | W W E |
| 20:48.37 | xdaIIsuko | 5 . 0 3 . 0 2 |
| 20:49.06 | xdaIIsuko | there are 4 boxes (characters) |
| 20:49.19 | xdaIIsuko | that is all rest of them is blank |
| 20:49.21 | cp15 | Hmm... Looks strange |
| 20:49.39 | cp15 | Try MaUpgreadeUt_noID |
| 20:49.45 | xdaIIsuko | i will send the file across it to you |
| 20:49.54 | xdaIIsuko | you mean to upgrade ? |
| 20:50.02 | cp15 | http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_Upgrade_Errors |
| 20:50.09 | cp15 | HELP, after upgrade it shows "No GSM" |
| 20:50.18 | cp15 | Looks similar to your problem |
| 20:51.07 | xdaIIsuko | i will try with that now |
| 20:58.34 | cp15 | Does it work? |
| 20:59.42 | xdaIIsuko | it gives me with an error |
| 20:59.56 | xdaIIsuko | ERROR 114: RADIO ROM UPDATE ERROR |
| 21:00.16 | xdaIIsuko | but it tries to update compard to before |
| 21:01.24 | xdaIIsuko | second time also it gives error |
| 21:01.27 | xdaIIsuko | i will try again |
| 21:01.31 | cp15 | Same error? |
| 21:01.52 | xdaIIsuko | yes |
| 21:03.21 | cp15 | Then I am afraid your radio rom was flashed incorrectly and is not recoverable now :-( |
| 21:03.53 | cp15 | Where did you get the device? Do you still have warranty? |
| 21:04.03 | xdaIIsuko | nope |
| 21:04.15 | xdaIIsuko | i bought it in the uk |
| 21:04.24 | cp15 | Did the rest of the update work ok? |
| 21:04.42 | xdaIIsuko | yes it did |
| 21:05.09 | cp15 | When you make a reset, which version numbers do you see in the right lower corner? |
| 21:05.33 | xdaIIsuko | 5.03.02 |
| 21:06.15 | cp15 | Still WM5? Then the update (downdate actually) didn't work at all |
| 21:06.38 | cp15 | What do you get else? There should be three version numbers |
| 21:06.52 | xdaIIsuko | i did not downgrade to 2003SE |
| 21:06.59 | xdaIIsuko | you want me to do that ? |
| 21:07.34 | cp15 | Well, I would try... Since you can only use it as PDA in this condition |
| 21:08.04 | xdaIIsuko | how can i go with that ? |
| 21:08.11 | xdaIIsuko | I don't have rom for that one |
| 21:08.21 | xdaIIsuko | the one which i have is WM5 |
| 21:08.34 | xdaIIsuko | which is also the one you pointed out |
| 21:10.05 | cp15 | No, I am quite sure there are no official WM5 roms |
| 21:10.33 | cp15 | Probably it aborted after the radio error |
| 21:10.44 | cp15 | How long did it take to get to this error? |
| 21:10.52 | xdaIIsuko | immediate |
| 21:11.02 | xdaIIsuko | it never goes with other rom upgrade |
| 21:11.13 | xdaIIsuko | i don't have 2003SE rom |
| 21:11.26 | xdaIIsuko | i will check for that |
| 21:11.35 | cp15 | The one I gave you the url for is 2003SE |
| 21:11.52 | cp15 | But probably it doesn't work since it tries to update the (non-working) radio first |
| 21:14.03 | xdaIIsuko | great |
| 21:14.11 | xdaIIsuko | it is only the Radio ROM not working |
| 21:14.34 | xdaIIsuko | the another one is upgrading now |
| 21:14.52 | xdaIIsuko | i renamed radio_.nbf to .old file |
| 21:15.31 | cp15 | Maybe the problem is also in the bootloader and the 2003SE bootloader is able to reflash the radio rom |
| 21:16.57 | xdaIIsuko | we will give a check |
| 21:17.06 | xdaIIsuko | still loading CE Rom |
| 21:17.11 | xdaIIsuko | Etended ROM Completed |
| 21:22.03 | xdaIIsuko | D 1.40.00 WWE |
| 21:22.09 | xdaIIsuko | this is the version now |
| 21:23.32 | cp15 | Ok, do you see a radio version? |
| 21:23.41 | xdaIIsuko | no |
| 21:23.50 | xdaIIsuko | I can see only the ROm version |
| 21:23.58 | cp15 | There should be 3 lines... What are they? |
| 21:24.09 | xdaIIsuko | Radio: Protocol and ExtROM are simply blank |
| 21:25.01 | xdaIIsuko | you mean on the boot up ? |
| 21:25.10 | xdaIIsuko | there are only two lines |
| 21:25.13 | xdaIIsuko | No GSM |
| 21:25.17 | cp15 | Yes, there are 3 lines |
| 21:25.19 | cp15 | R: |
| 21:25.25 | xdaIIsuko | D 1.40.00 WWE |
| 21:25.30 | cp15 | G |
| 21:25.59 | cp15 | No G also? |
| 21:26.09 | xdaIIsuko | no G |
| 21:26.37 | xdaIIsuko | No GSM |
| 21:26.37 | xdaIIsuko | D 1.40.00 WWE |
| 21:26.42 | cp15 | Does the customization start after you finished the cut & paste excercise? |
| 21:26.45 | xdaIIsuko | this is how thy appear in the right botom |
| 21:26.48 | xdaIIsuko | yes |
| 21:26.49 | xdaIIsuko | i did |
| 21:27.00 | cp15 | Ok, then the extrom works at least |
| 21:27.21 | xdaIIsuko | why we could not see the version in the device info ? |
| 21:27.27 | xdaIIsuko | for ext rom |
| 21:27.41 | cp15 | Not sure |
| 21:28.01 | xdaIIsuko | what should i try now ? |
| 21:28.17 | cp15 | rename radio_.nbf to its original name and try to run the update again |
| 21:28.39 | cp15 | If it still doesn't work, there is no hope |
| 21:28.42 | xdaIIsuko | doing it |
| 21:29.00 | lamikr | Hi CP15. I think I need help in something very basic c code... |
| 21:29.26 | cp15 | Ok, go on |
| 21:29.50 | lamikr | If I form phoneBuffer with sprintf(phoneBuffer,"AT+CMGS=%d%c0025000C91534870459282010005E8329BFD06%c", strlen(sms_pdu)/2, 0x0d, 0x1a); and send to module, sms is send. |
| 21:30.17 | lamikr | But following will fail. |
| 21:30.19 | lamikr | sprintf(phoneBuffer,"AT+CMGS=%d%c%s%c", strlen(sms_pdu)/2, 0x0d, "0025000C91534870459282010005E8329BFD06", 0x1a); |
| 21:30.36 | xdaIIsuko | radio upgrade failed now also |
| 21:31.22 | cp15 | Sorry, then it is either defective or has been flashed with something it shouldn't have been |
| 21:31.39 | cp15 | lamirk: I will check |
| 21:31.57 | lamikr | xdaIIsuko. Maybe the radio is simple broken? In h6300 group one had problem to get rom updated because he broke her wlan radio... That part always failed. |
| 21:33.27 | xdaIIsuko | ooo my god |
| 21:34.05 | lamikr | Where have you bought your phone, can it be fixed? |
| 21:34.45 | xdaIIsuko | i bought this in UK |
| 21:34.52 | xdaIIsuko | and now i'm in india |
| 21:35.20 | lamikr | No good :-( But do you know has it anyway quarantee? |
| 21:35.30 | xdaIIsuko | no guarantee |
| 21:36.13 | cp15 | lamikr: Both functions produce the same result |
| 21:36.38 | xdaIIsuko | cp15: is the one which you have is an official one or cooked ? |
| 21:36.51 | cp15 | What one? |
| 21:37.06 | xdaIIsuko | No GSM |
| 21:37.07 | xdaIIsuko | D 1.40.00 WWE |
| 21:37.47 | xdaIIsuko | ftp://xda:xda@ftp.xda-developers.com/BlueAngel/Shipped_Complete_Updates/O2_UK_XDAIIs_WWE_14000_237_11200_SHIP/Xda_IIs_Upgrade_v140237.exe |
| 21:37.50 | xdaIIsuko | this one |
| 21:39.14 | cp15 | It is an officially shipped update from o2 uk |
| 21:46.46 | lamikr | cp15: Yes, I also thought they should... and actually they are. I messed something as now it is working... Sorry for that... The real problem is actually that following does not work: |
| 21:47.06 | lamikr | sprintf(phoneBuffer,"AT+CMGS=%d%c%s%c", strlen(sms_pdu)/2, 0x0d, pdu, 0x1a); |
| 21:47.57 | cp15 | Are sms_pdu and pdu the same thing? |
| 21:48.50 | lamikr | sms_pdu is const *char, and pdu is only *char... This code is in sendSMS function of Phonecomms.c. There is earlier: pdu=sms_pdu; |
| 21:49.49 | cp15 | Have you tried using strlen(pdu)/2 and setting pdu to your string mentioned above? |
| 21:50.58 | lamikr | if I printf("%s", pdu) I get the same string I used in earlier example: 0025000C91534870459282010005E8329BFD06 |
| 21:51.28 | cp15 | Then it should do actually the same... |
| 21:51.55 | lamikr | But If I printf the phoneBuffer I get different output: With |
| 21:51.57 | lamikr | sprintf(phoneBuffer,"AT+CMGS=%d%c%s%c", strlen(sms_pdu)/2, 0x0d, "0025000C91534870459282010005E8329BFD06", 0x1a); |
| 21:51.59 | lamikr | I get |
| 21:52.21 | lamikr | 0025000A814070459282010005E8329BFD06 |
| 21:52.31 | lamikr | But with |
| 21:52.47 | lamikr | sprintf(phoneBuffer,"AT+CMGS=%d%c%s%c", strlen(sms_pdu)/2, 0x0d, pdu, 0x1a); |
| 21:52.50 | lamikr | I get |
| 21:53.09 | lamikr | 0025000C91534870459282010005E8329BFD06 |
| 21:53.47 | cp15 | It is different in the middle |
| 21:54.20 | lamikr | Yes... It is longer in the middle and with that I get +CMS ERROR: 304',15 that is PDU error |
| 21:58.00 | *** part/#htc-blueangel cp15 (i=otuweh@p549A030E.dip0.t-ipconnect.de) |
| 21:58.08 | *** join/#htc-blueangel cp15 (i=otuweh@p549A030E.dip0.t-ipconnect.de) |
| 21:58.09 | *** mode/#htc-blueangel [+o cp15] by ChanServ |
| 21:58.37 | cp15 | Can you tell me the second one again? I lost my buffer |
| 22:00.14 | Funklord | < lamikr> 0025000C91534870459282010005E8329BFD06Z |
| 22:00.23 | Funklord | is that what you needed? |
| 22:01.22 | lamikr | I will try to format it a little bit better: |
| 22:03.12 | cp15 | Look for a program called pduspy. Is a windows program, but works fine with wine |
| 22:05.21 | lamikr | cp15: I will try that. |
| 22:06.07 | lamikr | Actually I found that yesterday also from web put did not tried yet because I thought it would only run in windows. |
| 22:06.54 | cp15 | Re-implementing it for gomunicator would be useful |
| 22:07.45 | cp15 | So you can both analyze and write evil SMSes :-) |
| 23:09.52 | lamikr | cp15... Yes as I am still not seeing the light in this one. I need to write tomorrow good test program. |
| 23:10.31 | lamikr | SMS messages send to my phone arrives just fine to gomunicator. |
| 23:13.05 | lamikr | btw, congrat for the 9mA, I noticed that from the log... Now your should have pretty long uptime without battery charge. |
| 23:16.09 | cp15 | Well... Not yet perfect, windows is around 3mA, but a big improvement |
| 23:16.41 | cp15 | Unfortunately currently sound does not work after wakeup |
| 23:16.46 | cp15 | Touchscreen works now |
| 23:17.51 | cp15 | Does your device also have that stupid M-Systems DOC G3? |
| 23:19.37 | lamikr | What's that? |
| 23:21.14 | cp15 | DiskOnChip... A SD-Card like flash memory |
| 23:21.37 | cp15 | I thought there is a linux driver, but there isn't |
| 23:24.31 | lamikr | Actually I am not sure at all. There is one everett/gcc80x86 that has investigated DOC. He unfortunately broke her wlan and that made her device to boot very slowly. And HP said that it would cost 150 $ only to check what is the problem :-( |
| 23:26.43 | cp15 | Just to check? Without any repair? |
| 23:27.29 | cp15 | How did he break the wlan? |
| 23:28.51 | lamikr | Yes, they told that the repair MIGHT cost something... He is not sure how he broke it. It may be fallen but he is not sure. |
| 23:30.12 | cp15 | Since it is probably not a problem which they can fix easily I think they need to change the board |
| 23:30.25 | cp15 | Together with the 150 $ it costs maybe as much as a new one |
| 23:34.30 | lamikr | Yes, and that drop his interest. Everett was working our sound driver :-( and got it working partially... (It works with OSS & to headphone)... Now somebody should rewrote it to alsa and also make it working with all speakers and mics. (And also check that it will work with the gsm) |
| 23:36.19 | lamikr | The good thing is, that we have somekind of specs for this audiocodec. (tsc2101) |
| 23:36.19 | cp15 | How many developers does your project have? |
| 23:38.45 | lamikr | Only 3 active ones... And everett was another one. Last 3 weeks only I have done something and I am quite beginner. (I have made joypad driver, bt driver and maintained updates from 2.6.12 --> 2.6.14) but I have newer tried to do reverse engineering from the wince memory dumps for example. |
| 23:39.23 | lamikr | But I have tried to document everything I do, and I think that has teched me. |
| 23:41.03 | lamikr | When I started, I did not know what was giop or mux, etc... |
| 23:41.09 | cp15 | Better than here, where for the kernel I am currently the only developer |
| 23:41.58 | cp15 | Does 2.6.14 have any functionality which is missing in 2.6.12? |
| 23:43.33 | lamikr | It should have much better SD card support at least in omap patches, but I have not get our driver to mound rootfs from that. |
| 23:44.35 | cp15 | SD card works fine here, even the speed is ok (within its limitations...) |
| 23:45.35 | lamikr | After 2.6.14 we got 512 MB MMC cards working. Earlier there were problems with "type 4" MMC cards. |
| 23:47.29 | lamikr | There is one "blueangel" that actually got our bootloader to read kernel from the SD cards fat partition. We use 3 phase boot. There is small wince program that reads kernel boot args and passes them to another wince independent loader. This wince independent loader reads kernel image and jumps to execute it. (We did not get haret to work so this is our own thing...) |
| 23:47.55 | lamikr | But it is based on to u_bootloader |
| 23:50.19 | cp15 | Ah, interesting... I think I will try to make a native boot soon. But first I have to fix the sound |
| 23:50.30 | lamikr | There were quite big architectural + API changes between 2.6.12 and 2.6.14 kernels so it took time to get LCD, etc. working. |
| 23:51.38 | cp15 | Oh no... |
| 23:51.38 | lamikr | Btw, have you worked with WLAN? I think we have same wlan chip. Husam who is very good, has tried to get it working for a pretty long time. Unfortunately he had some very busy work things and has been offline for about 3 weeks now. |
| 23:52.11 | cp15 | I wrote a card service for the chip and got the firmware loaded. Unfortunately it does not boot |
| 23:53.28 | lamikr | I think husam is able to ask at least the mac address from the wlan chip after booting to Linux... |
| 23:54.38 | cp15 | Has he published his work somewhere? |
| 23:56.27 | lamikr | It is in our kernel svn... But there is still quite much other crap there... |
| 23:58.18 | lamikr | Do you know http://acx100.sf.net |
| 23:59.54 | lamikr | They have made driver for the same wlan module, but their driver is for the desktop computers... So the communication between device and chip is different for us. |