| 00:17.46 | *** join/#cubieboard skullcrasher (~skullcras@178-27-235-191-dynip.superkabel.de) |
| 00:18.16 | skullcrasher | ok, got a working lubuntu server now |
| 00:18.24 | skullcrasher | but still ethernet doesn't ... |
| 00:18.40 | skullcrasher | i took the "official" server image from cubieboard site |
| 00:19.17 | skullcrasher | how can i surely say that the ethernet part has a defect |
| 00:25.30 | *** join/#cubieboard caveat- (hoax@2a01:4f8:191:9111:30::10) |
| 00:27.53 | skullcrasher | btw Turl, i could give u a dmesg|grep eth0 now :) |
| 00:28.45 | Turl | a full dmesg would be even better |
| 00:35.38 | skullcrasher | could take some minutes -.- |
| 00:35.53 | skullcrasher | the only thing that worked before was wifi, but on server no iwconfig n stuff ... |
| 00:40.48 | skullcrasher | http://goodtime.indus.uberspace.de/filebin/index.php/Qlre/ |
| 00:51.13 | skullcrasher | omfg |
| 00:51.20 | skullcrasher | guess if found it |
| 00:51.52 | skullcrasher | if i press the cable into the port in a strange position it works ... |
| 00:52.14 | skullcrasher | looks like the pins of the cable don't connect properly ... |
| 00:52.16 | *** join/#cubieboard akaizen (~akaizen@limelabs.static.monkeybrains.net) |
| 00:54.45 | skullcrasher | but this can't be ... |
| 00:54.50 | skullcrasher | 2 days old |
| 01:04.48 | *** join/#cubieboard rz2k (~rz2k@188.244.38.171) |
| 01:28.51 | *** join/#cubieboard skullcrasher_ (~skullcras@178-27-235-191-dynip.superkabel.de) |
| 02:00.09 | *** join/#cubieboard carlos-huang (~carlos@220.112.0.76) |
| 02:05.14 | *** join/#cubieboard joedj (~joedj@joedj.net) |
| 02:06.28 | *** join/#cubieboard t3st3r (~t3st3r@gateway/tor-sasl/t3st3r) |
| 02:17.10 | *** join/#cubieboard ghost75_ (~quassel@dslb-088-066-190-109.pools.arcor-ip.net) |
| 03:32.40 | *** join/#cubieboard DV (~veillard@libvirt.org) |
| 03:56.59 | *** join/#cubieboard TheSeven (~quassel@rockbox/developer/TheSeven) |
| 04:01.33 | *** join/#cubieboard DV (~veillard@libvirt.org) |
| 04:12.38 | *** join/#cubieboard JohnDoe_71Rus (~Miranda@unaffiliated/johndoe-71rus/x-4170227) |
| 05:02.57 | *** join/#cubieboard laurent\ (~laurent@unaffiliated/laurent/x-4048133) |
| 06:17.23 | *** join/#cubieboard sassmann (~sassmann@ppp-46-244-239-33.dynamic.mnet-online.de) |
| 06:26.41 | *** join/#cubieboard akaizen (~akaizen@108-78-253-15.lightspeed.sntcca.sbcglobal.net) |
| 06:37.00 | *** join/#cubieboard lauri (~lauri@gn29.zone.eu) |
| 06:37.10 | lauri | Hello |
| 06:37.22 | lauri | I am having strange issues with HDMI on cubietruck |
| 06:37.59 | lauri | Frist of all if I boot it without screen connected and plug in a screen later on, it is not picked up |
| 06:38.12 | lauri | Occasionally the screen loses signal for a second or two |
| 06:38.52 | lauri | With screen blanking I sometimes lose HDMI connection completely |
| 06:49.30 | *** join/#cubieboard DEac-_ (~deac@1360029782.d-dsl.at) |
| 07:06.13 | *** join/#cubieboard stefanro (~stefan@2a00:61e0:41fd:6c01:405a:8077:d093:18b1) |
| 07:06.46 | *** join/#cubieboard fossxplorer (~Foss@146.247.129.214) |
| 07:06.47 | *** join/#cubieboard fossxplorer (~Foss@unaffiliated/fossxplorer) |
| 07:07.26 | *** join/#cubieboard focus (~Doug@host81-149-149-147.in-addr.btopenworld.com) |
| 07:08.07 | *** join/#cubieboard retrosenator (~sean@121.54.58.134) |
| 07:08.23 | retrosenator | does anyone know what the nc/12v plug on the cubie truck is for? |
| 07:08.50 | lauri | retrosenator: I suppose it's for 12V rail of SATA disk |
| 07:09.01 | lauri | retrosenator: if you use 3.5" desktop disks |
| 07:09.07 | retrosenator | so I cannot power the cubie truck from 12 volts |
| 07:09.25 | retrosenator | there is already a 12v sata plug |
| 07:09.39 | *** join/#cubieboard stefanro (~stefan@2a00:61e0:41fd:6c01:405a:8077:d093:18b1) |
| 07:09.53 | retrosenator | do you mean, the cubie truck needs an additional 12v to power the disk? It doesn't have an onboard booster? |
| 07:10.11 | lauri | retrosenator: haha @ booster |
| 07:10.36 | lauri | retreosenator: I am pretty sure there is no onboard booster, that just would not make sense |
| 07:11.13 | retrosenator | in any case my sata drive is 5v only it doesn't need 12v power but thanks |
| 07:11.24 | retrosenator | I have to figure out how to power this thing from a 12 volt systen |
| 07:11.37 | lauri | retrosenator: there is LiPo input |
| 07:11.48 | lauri | retrosenator: but I don't know which voltage range it accepts |
| 07:11.52 | retrosenator | what voltage should I use? |
| 07:12.09 | retrosenator | I wonder if it boosts to 5 volts from 1 cell |
| 07:12.15 | retrosenator | or drops to 5 volts from a 2 cell pack |
| 07:12.19 | lauri | retrosenator: the "correct" way to power it is via barrel jacket 5V @ 2A |
| 07:12.29 | lauri | retrosenator: (2A or more) |
| 07:12.31 | retrosenator | I dont have a barrel jack unfortunately |
| 07:12.48 | lauri | retrosenator: LiPo probably works with 2cell battery pack, but I haven't tried |
| 07:13.09 | retrosenator | hmm, I have an adjustable buck converter from china |
| 07:13.15 | *** join/#cubieboard stefanro (~stefan@2a00:61e0:41fd:6c01:405a:8077:d093:18b1) |
| 07:13.16 | retrosenator | 3 amp I believe |
| 07:13.22 | retrosenator | so I guess I"ll set it to 5 volts |
| 07:13.36 | retrosenator | just have to unsolder the barrel plug which is a bit of a pain |
| 07:13.46 | *** join/#cubieboard irc4001 (~miner2014@82.113.121.88) |
| 07:14.21 | lauri | I just got these 2€ dual USB chargers from dealextreme |
| 07:14.27 | lauri | 5V@2A |
| 07:14.31 | lauri | seems to work quite well |
| 07:14.40 | retrosenator | they take 11 to 15 volt input or so? |
| 07:14.55 | *** join/#cubieboard miner2015 (~miner2014@178-24-142-140-dynip.superkabel.de) |
| 07:14.56 | lauri | 220v -> 5v chargers |
| 07:15.07 | retrosenator | oh, yeah that version is useless to me |
| 07:15.16 | lauri | dealextreme also has these 12-36v -> 5v chips |
| 07:15.18 | retrosenator | but they probably have a 12v one, doesn't matter |
| 07:15.24 | retrosenator | I can't get things shipped here anyway |
| 07:15.31 | lauri | to where? :D |
| 07:15.39 | retrosenator | I'm in coron island |
| 07:15.40 | JohnDoe_71Rus | we found that spends rtc battery and battery on a ct |
| 07:15.49 | retrosenator | shipping is either $50, or it gets stolen |
| 07:16.21 | retrosenator | anyway, I already have the 8-36 to adjustable 3 amp board so using that |
| 07:18.55 | *** join/#cubieboard MeGupsta (~abhinav@nusnet-228-5.dynip.nus.edu.sg) |
| 07:19.51 | *** join/#cubieboard abhinav2812 (8984fa0c@gateway/web/freenode/ip.137.132.250.12) |
| 07:21.53 | MeGupsta | trying to get two wifi dongles on the cubieboard2, but only one of them gets registered as a wlan interface |
| 07:22.24 | MeGupsta | wifi : edimax , driver used : 8192cu |
| 07:23.25 | MeGupsta | can someone here please help me figure this out? thanks! |
| 07:25.58 | rm | tried "ifconfig -a"? |
| 07:26.30 | MeGupsta | yup, just no interface, doesn't even get registered at the 70.rules.persistent |
| 07:27.25 | MeGupsta | which is weird, because when i tried to replace it with the tplink dongle, which uses a 8188eu driver, the driver gets loaded and i get a dmesg and lsusb out put and everything |
| 07:27.31 | MeGupsta | just no wlan interface |
| 07:28.05 | MeGupsta | i am wondering if this could be solved by adding something to the fex file but unsure of how to proceed with it |
| 07:29.24 | JohnDoe_71Rus | MeGupsta: you may need firmware for wifi |
| 07:29.41 | MeGupsta | but i am able to run one dongle with success |
| 07:29.41 | JohnDoe_71Rus | see system log |
| 07:30.29 | MeGupsta | dmesg says something on the lines of not enough DMA |
| 07:30.45 | MeGupsta | wait let me try and reproduce the exact error statement, sorry |
| 07:31.47 | JohnDoe_71Rus | no.not. adapter in the system log can be determined. lacks the firmware to run. due to the legal restrictions on the firmware |
| 07:32.38 | MeGupsta | hmm, which is weird because i was able to run both of them with the deprecated rtlwifi rtl8192cu drivers |
| 07:33.21 | MeGupsta | its when i tried to replace the drivers with the new ones for running one of them as hostap, is when i encountered this problem for the first time |
| 07:33.56 | MeGupsta | but i will try getting the firmware as well, apt-get realtek-firmware correct? |
| 07:38.57 | *** join/#cubieboard AdvancedNewbie (~AdvancedN@stjhnf0157w-047055222101.dhcp-dynamic.FibreOp.nl.bellaliant.net) |
| 07:50.32 | *** join/#cubieboard popolon (~popolon@og-free.planet-service.fr) |
| 07:50.33 | *** join/#cubieboard popolon (~popolon@unaffiliated/popolon) |
| 07:50.57 | *** join/#cubieboard fossxplorer (~fossxplor@unaffiliated/fossxplorer) |
| 08:19.37 | *** join/#cubieboard tat (~tat@port-83-236-202-28.static.qsc.de) |
| 08:22.39 | retrosenator | so now it's powered via the barrel connection |
| 08:22.45 | retrosenator | and sata works, but no wifi or bluetooth |
| 08:23.38 | retrosenator | it's using about .2 amps at 12 volts |
| 08:27.30 | *** join/#cubieboard wickwire (~wickwire@a81-84-184-53.cpe.netcabo.pt) |
| 08:28.35 | *** join/#cubieboard Eyal_ (~Eyal@5-49-140-120.hfc.dyn.abo.bbox.fr) |
| 08:49.32 | *** join/#cubieboard nighty-_ (~nighty@lns-bzn-49f-62-147-170-46.adsl.proxad.net) |
| 08:53.43 | *** join/#cubieboard iggy (~iggy@theiggy.com) |
| 09:02.05 | *** join/#cubieboard Midnightmyth (~quassel@93-167-84-102-static.dk.customer.tdc.net) |
| 09:02.08 | retrosenator | I got it working.. |
| 09:02.20 | retrosenator | going to try to use the cubie as an nfs server |
| 09:02.34 | retrosenator | so I don't have to plug my usb harddrives in to use them |
| 09:03.10 | retrosenator | anyway, wifi is only transfering at 3mb/s over scp, hope nfs is faster |
| 09:10.40 | JohnDoe_71Rus | retrosenator: For cb a10 was achieved 6.9 Mbit/s wget download and 4-5 Mbit/s WIFI connection. with https://romanrm.net/a10 this kernel |
| 09:11.03 | retrosenator | I think I have a20 |
| 09:11.04 | rm | Mbit/sec or Mbyte/sec |
| 09:11.16 | JohnDoe_71Rus | http://habrahabr.ru/post/215401/ if yoг know russian |
| 09:11.19 | retrosenator | is the wget via ethernet? |
| 09:11.24 | retrosenator | mine is mbyte/sec |
| 09:11.31 | retrosenator | so about 24mbit/sec |
| 09:11.43 | retrosenator | using builtin wifi on cubie truck |
| 09:12.26 | retrosenator | I think ssh has a lot of overhead |
| 09:13.11 | JohnDoe_71Rus | cubieboard not good for wifi router |
| 09:13.28 | retrosenator | I want to use it to make a wireless harddrive |
| 09:13.49 | retrosenator | I wonder if it can do wifi n |
| 09:15.07 | retrosenator | also I can use it as a music player maybe |
| 09:27.56 | rm | I have about 40 Mbit on both MK802 with a 5G WiFi dongle, and on Cubieboard A10 with a 2.4G one |
| 09:29.20 | retrosenator | funny, iwconfig says not assiociated |
| 09:29.31 | retrosenator | even though i am connected via ssh over wifi to see this |
| 09:29.53 | retrosenator | it should be 54mbit minus overhead I think |
| 09:30.03 | retrosenator | unless it can do wireless mode n |
| 09:30.25 | retrosenator | what is p2p0? |
| 09:36.28 | *** join/#cubieboard kludge` (~comet@unaffiliated/espiral) |
| 09:39.21 | *** join/#cubieboard indy (~indy@shadow.kastnerove.cz) |
| 09:41.04 | retrosenator | I may make this thing into a server... |
| 09:42.36 | retrosenator | is there a way to forward audio output from a laptop to the cubie over the network? |
| 09:42.48 | retrosenator | maybe via bluetooth? |
| 09:43.23 | rm | pulseaudio can do that |
| 09:43.44 | rm | at least if your laptop also runs GNU/Linux |
| 09:43.48 | retrosenator | oh cool.. how do I check the thermal sensors? |
| 09:44.08 | retrosenator | everything is running linux on this boat |
| 09:46.33 | *** join/#cubieboard Ti_W_B (~Ti_W_B@112-105-206-177.adsl.dynamic.seed.net.tw) |
| 09:47.50 | swabbles | retrosenator: pulseaudio. |
| 09:48.06 | swabbles | rm: there are binaries for Microsoft Windows as well (never tried those though). |
| 09:48.32 | rm | which install as a virtual audio card into the system? |
| 09:48.42 | rm | or do you mean just as a sink (to playback stuff from other machines) |
| 09:49.14 | swabbles | Within Linux it is just a sink. |
| 09:49.22 | retrosenator | I just want to run an audio player on the laptop for example, and have it output to the speakers attached to the cubietruck |
| 09:49.27 | swabbles | I am not sure how PA is supposed to work on Windows. |
| 09:49.35 | retrosenator | trying to figure nfs out.. it's been a long time since I sued it |
| 09:49.59 | swabbles | retrosenator: then you want to use PA. |
| 09:50.51 | retrosenator | <PROTECTED> |
| 10:06.15 | *** join/#cubieboard Jin^eLD (~jin@belief.htu.tuwien.ac.at) |
| 10:08.39 | lauri | Okay DPMS is rather broken, once HDMI screen goes to sleep it never comes back :/ |
| 10:10.24 | swabbles | lauri: https://github.com/StephanvanSchaik/gentoo-on-arm/blob/master/x11-using-fbturbo.md |
| 10:10.34 | rm | DPMS works fine for me in 24-bit colour modes |
| 10:10.48 | rm | in 16-bit modes there is a screen corruption after wake-up |
| 10:19.17 | lauri | swabbles: could you elaborate? I am on Debian Jessie, so I just need xf86-video-fbturbo driver and I should be good to go? |
| 10:29.22 | swabbles | No, you have to configure xorg to not use dpms. |
| 10:29.43 | swabbles | The xf86-video-fbturbo is what you should use for X11. |
| 10:32.35 | lauri | with fbturbo the DPMS should work right? |
| 10:33.36 | swabbles | No, DPMS doesn't work properly by default, which is why you want to use those xorg.conf settings. |
| 10:37.49 | rm | it does work properly |
| 10:38.00 | rm | with fbturbo, yes |
| 10:43.38 | swabbles | rm: maybe as of recently, but the sunxi video driver is a mess. |
| 10:44.41 | swabbles | And it isn't really related to sunxi, since I had to disable DPMS on my Chromebook as well. |
| 10:45.07 | swabbles | So yes, if fbturbo has been patched to circumvent/solve that problem, then it will work. |
| 10:45.15 | swabbles | Otherwise you'll have to disable it. |
| 10:52.06 | *** join/#cubieboard zn414 (~zn414@unaffiliated/zn414) |
| 10:56.31 | retrosenator | ah, you have a chromebook and cubie truck too! |
| 10:59.45 | swabbles | And a Cubieboard 2, IFC6410, olimex A10, and a Pandaboard ES :'). |
| 11:06.15 | rm | I know it works now because it was a crucial feature for me |
| 11:06.54 | rm | I even used an external USB DVI video "card" to have DPMS before that |
| 11:07.15 | *** join/#cubieboard Ti_W_B (~Ti_W_B@112-105-206-177.adsl.dynamic.seed.net.tw) |
| 11:07.29 | swabbles | lol. |
| 11:07.36 | swabbles | Will have to update it sometime then. |
| 11:11.56 | lauri | swabbles: I installed fbturbo, it was detected by xorg aswell but still DPMS dies |
| 11:14.40 | rm | ssh from a different machine and check what you have in dmesg and Xorg.log when it fails to wake up properly |
| 11:14.44 | lauri | (that was 0.4.0 version though) |
| 11:15.02 | rm | yeah ensure you use the latest version |
| 11:15.19 | rm | if nothing helps, send the problem report to linux-sunxi mailing list |
| 11:15.44 | lauri | alrighty |
| 11:25.53 | *** join/#cubieboard retrosenator (~sean@121.54.58.217) |
| 11:26.30 | *** join/#cubieboard carlos-huang (~carlos@220.112.3.148) |
| 11:29.39 | *** join/#cubieboard bizarro_1 (~bizarro_1@73.Red-193-153-237.dynamicIP.rima-tde.net) |
| 11:34.53 | retrosenator | I'm only getting 3mb/s over nfs :( |
| 11:37.04 | *** join/#cubieboard carlos-huang (~carlos@220.112.3.148) |
| 11:39.34 | retrosenator | I think it's maybe a cpu limitation actually because it's ntfs |
| 11:46.28 | *** join/#cubieboard deasy (~deasy@host-85-201-190-191.brutele.be) |
| 11:48.43 | rm | check if you have 100% CPU load |
| 11:50.46 | *** join/#cubieboard Ti_W_B (~Ti_W_B@112-105-206-177.adsl.dynamic.seed.net.tw) |
| 11:51.39 | *** join/#cubieboard zn414 (~zn414@unaffiliated/zn414) |
| 11:53.51 | retrosenator | no, I tried on a normal directory |
| 11:53.59 | retrosenator | still 3mb/s |
| 11:56.30 | *** join/#cubieboard stefanro (~stefan@2a00:61e0:41fd:6c01:a179:6b2c:653f:6d6a) |
| 11:57.03 | rm | over... wifi? |
| 11:57.41 | retrosenator | yes |
| 11:58.11 | rm | and what is the wifi connection speed |
| 11:58.24 | retrosenator | I don't know how to tell because iwconfig doesn't show this |
| 11:58.48 | *** join/#cubieboard stefanro (~stefan@2a00:61e0:41fd:6c01:a179:6b2c:653f:6d6a) |
| 11:58.53 | retrosenator | it says not associated even though it is working, and ifconfig output is normal |
| 11:59.27 | rm | router doesn't show either? and what standard does the router support? |
| 12:02.13 | retrosenator | it's not a router, its a chromebook |
| 12:02.26 | retrosenator | running hostapd and udhcpd |
| 12:02.32 | retrosenator | it supports abgn |
| 12:02.45 | retrosenator | set to mode g |
| 12:03.22 | retrosenator | I could try n I guess and see what happens but I dont think cubie truck can do that can it? |
| 12:04.26 | *** join/#cubieboard focus (~Doug@host81-149-149-147.in-addr.btopenworld.com) |
| 12:05.24 | retrosenator | anyway, at 54mbits I should get a lot more than 24mbits shouldn't I? |
| 12:23.59 | lauri | nope |
| 12:24.06 | lauri | 54mbit is theoretical limit |
| 12:24.16 | lauri | in reality 54mbit card gets you about 20mbit |
| 12:24.25 | lauri | that applies to ALL wifi cards |
| 12:24.34 | *** join/#cubieboard enrico_ (~quassel@host164-128-static.225-95-b.business.telecomitalia.it) |
| 12:24.38 | lauri | you get roughly half bandwidth of the advertised bitrate |
| 12:24.58 | lauri | I managed to install fbturbo latest version |
| 12:25.04 | lauri | but still dpms dies |
| 12:25.05 | retrosenator | what is that? |
| 12:25.42 | retrosenator | is it for framebuffer? |
| 12:27.42 | lauri | fbturbo is supposed to give basic 2D acceleration |
| 12:27.56 | lauri | and the guys said it would fix DPMS issues |
| 12:28.03 | lauri | my monitor goes to sleep and it never wakes up |
| 12:28.46 | lauri | xorg.log: http://pastebin.com/FY8SR6B0 |
| 12:28.59 | rm | <lauri> in reality 54mbit card gets you about 20mbit <- yep correct |
| 12:29.23 | rm | i have those 40 Mbit that I mentioned above on a connection that's displayed as 180 Mbit in iwconfig |
| 12:29.57 | lauri | dmesg: iwconfig can show you whatever |
| 12:30.03 | lauri | crap |
| 12:30.15 | lauri | in dmesg nothing interesting is happening |
| 12:30.48 | *** join/#cubieboard stefanro (~stefan@2a00:61e0:41fd:6c01:a179:6b2c:653f:6d6a) |
| 12:31.17 | lauri | [ 25.254] (==) FBTURBO(0): DPMS enabled |
| 12:32.39 | retrosenator | rm: mode n? |
| 12:32.51 | retrosenator | rm: does cubie truck support this speed? |
| 12:35.48 | retrosenator | anyway that is lame, is there some way to have wifi raw mode without normal protocols or something for point to point ? |
| 12:36.08 | lauri | ad-hoc exists but it's rather untested |
| 12:36.26 | retrosenator | oh, I can use ad-hoc, is it any faster? |
| 12:36.29 | *** join/#cubieboard Jin^eLD (~jin@belief.htu.tuwien.ac.at) |
| 12:38.25 | *** join/#cubieboard ganbold_ (~Ganbold@173.244.215.173) |
| 12:40.56 | *** join/#cubieboard rmarko (~sorki@fedora/sorki) |
| 12:44.04 | rm | <retrosenator> rm: mode n? <- yes, but I use external dongles on other A10 devices |
| 12:44.20 | rm | <retrosenator> rm: does cubie truck support this speed? <- Cubietruck absolutely should support 11n, at least up to 150 Mbit |
| 12:44.24 | rm | not sure about 300 |
| 12:44.31 | retrosenator | oh ok |
| 12:44.43 | retrosenator | so maybe with ad-hoc and 150mbit I can get 60mbits heh |
| 12:44.54 | lauri | you're supposed have two antennas for 300mbit |
| 12:45.10 | retrosenator | how far apart do they need to be? |
| 12:45.20 | lauri | retrosenator: I'd forget about ad-hoc |
| 12:45.26 | lauri | retrosenator: don't you have AP? |
| 12:45.29 | retrosenator | it isn't going to add speed is it? |
| 12:45.39 | retrosenator | yeah I'm using the chromebook as the ap |
| 12:46.12 | retrosenator | I could make the cubie the ap if that would help |
| 12:46.48 | *** join/#cubieboard _massi_ (~massi@host164-128-static.225-95-b.business.telecomitalia.it) |
| 12:46.51 | lauri | cubie works as AP |
| 12:46.53 | *** join/#cubieboard zn414 (~zn414@103.247.49.139) |
| 12:46.53 | *** join/#cubieboard zn414 (~zn414@unaffiliated/zn414) |
| 12:46.57 | lauri | with hostapd |
| 12:54.57 | retrosenator | lauri: did you compare speed sto this vs ad-hoc? |
| 12:55.20 | lauri | retrosenator: forget ad-hoc, if you're lucky it works with devices from same manufacturer.. |
| 12:55.29 | lauri | as I said it is not well tested mode |
| 12:55.33 | lauri | for any device |
| 12:59.03 | retrosenator | it has always worked fine for me in the past.. but ok |
| 13:02.19 | retrosenator | what is a good vnc server to use for the cubietruck? |
| 13:03.14 | rm | the regular one should work |
| 13:03.21 | *** join/#cubieboard ricardocrudo (~crudo@186.231.142.30) |
| 13:03.37 | rm | or actually no |
| 13:03.50 | retrosenator | x11vnc? |
| 13:04.00 | rm | you mean for sharing the existing GUI session? |
| 13:04.14 | rm | for that yeah, x11vnc is available |
| 13:04.32 | rm | but as a standalone VNC-only "Xorg", only "tightvncserver" is available |
| 13:05.35 | retrosenator | I need hardware acclerated opengl |
| 13:06.41 | rm | ...over VNC? |
| 13:08.20 | retrosenator | mainly just for benchmark testing |
| 13:08.40 | retrosenator | so the framerate over vnc is not important, only verifying the state it would have if I had a monitor |
| 13:10.13 | retrosenator | hmm.. hostap unknown hw_mode 'n' |
| 13:11.34 | *** join/#cubieboard DEac- (~deac@1360029782.d-dsl.at) |
| 13:20.27 | retrosenator | uh, it's going like 32mbits now |
| 13:22.50 | *** join/#cubieboard deasy (~deasy@host-85-201-190-191.brutele.be) |
| 13:23.25 | retrosenator | iw list is showing 54mbit as maximum though |
| 13:29.49 | *** join/#cubieboard zn414 (~zn414@103.247.48.175) |
| 13:29.49 | *** join/#cubieboard zn414 (~zn414@unaffiliated/zn414) |
| 13:34.42 | retrosenator | weird.. if I run iwconfig from ssh to cubie I get a completely different result from running iwconfig from xterm in vnc |
| 13:34.54 | retrosenator | also, the result from minicom (to the serial port) is the same as via ssh |
| 13:35.11 | retrosenator | it's saying 65 Mb/s in the xterm in vnc |
| 13:52.06 | lauri | it's not constant... |
| 13:53.54 | *** join/#cubieboard zn414 (~zn414@unaffiliated/zn414) |
| 13:56.16 | *** join/#cubieboard ninjak (~ninjak@77.239.137.142) |
| 13:58.21 | lauri | okay fbturbo docs say that DPMS is broken and they suggest disabling it in xorg config |
| 13:58.42 | lauri | but I think I noticed it should work with mali drivers |
| 14:20.45 | rm | really do they? |
| 14:20.46 | rm | where? |
| 14:21.56 | retrosenator | so despite glxinfo giving direct rendering.. opengl is ridiculously slow.. do the mali drivers not work in x or something? |
| 14:22.28 | retrosenator | not only slow but also buggy |
| 14:23.00 | *** join/#cubieboard swqa1549 (~Thunderbi@27.8.16.123) |
| 14:23.19 | ssvb_ | retrosenator: mali400 drivers do not support opengl |
| 14:23.42 | *** join/#cubieboard zn414 (~zn414@unaffiliated/zn414) |
| 14:24.04 | ssvb_ | retrosenator: this is what you get instead - http://en.wikipedia.org/wiki/OpenGL_ES |
| 14:24.18 | retrosenator | ok that is fine actually |
| 14:24.34 | retrosenator | can I use opengles in x? |
| 14:24.47 | ssvb_ | yes |
| 14:24.52 | retrosenator | because there are compatibility layers for opengles |
| 14:24.56 | retrosenator | to give you big gl |
| 14:26.00 | retrosenator | and it's actually just as fast.. they deprecated a lot of opengl for political reasons only |
| 14:26.19 | *** join/#cubieboard astrapotro (~mikel@248.Red-81-47-179.staticIP.rima-tde.net) |
| 14:26.21 | retrosenator | ok, will try mesa-demos for gles |
| 14:31.09 | retrosenator | I have libGLESv2.so but it's from october 2013.. |
| 14:32.59 | *** join/#cubieboard swqa1549 (~Thunderbi@27.8.16.123) |
| 14:34.52 | *** join/#cubieboard stefanro (~stefan@2a00:61e0:41fd:6c01:a179:6b2c:653f:6d6a) |
| 14:36.59 | *** join/#cubieboard DEac- (~deac@1360029782.d-dsl.at) |
| 14:44.38 | *** join/#cubieboard zn414 (~zn414@103.247.51.47) |
| 14:44.48 | *** join/#cubieboard zn414 (~zn414@unaffiliated/zn414) |
| 14:55.44 | *** join/#cubieboard madmaxx (x@unaffiliated/madmaxx) |
| 15:00.52 | *** join/#cubieboard t3st3r (~t3st3r@gateway/tor-sasl/t3st3r) |
| 15:00.59 | *** join/#cubieboard thesheff17 (~thesheff1@67.106.72.62.ptr.us.xo.net) |
| 15:13.38 | *** join/#cubieboard nils_2_ (~nils_2@unaffiliated/nils-2/x-2480262) |
| 15:24.11 | *** join/#cubieboard smccarthy (~smccarthy@208.99.166.84) |
| 15:24.51 | *** join/#cubieboard kivutar (~kivutar@jol13-2-82-235-181-242.fbx.proxad.net) |
| 15:26.32 | *** join/#cubieboard stefanro (~stefan@2a00:61e0:41fd:6c01:a179:6b2c:653f:6d6a) |
| 15:33.53 | *** join/#cubieboard stefanro (~stefan@2a00:61e0:41fd:6c01:a179:6b2c:653f:6d6a) |
| 15:35.27 | *** join/#cubieboard retrosenator (~sean@121.54.58.134) |
| 15:36.26 | *** join/#cubieboard Ti_W_B2 (~Ti_W_B@112-105-206-177.adsl.dynamic.seed.net.tw) |
| 15:42.50 | *** join/#cubieboard stefanro (~stefan@2a00:61e0:41fd:6c01:a179:6b2c:653f:6d6a) |
| 15:46.28 | *** join/#cubieboard stefanro (~stefan@2a00:61e0:41fd:6c01:a179:6b2c:653f:6d6a) |
| 15:49.01 | *** join/#cubieboard FR^2 (~frquadrat@farsquare.de) |
| 15:51.13 | *** join/#cubieboard thesheff17 (~thesheff1@67.106.72.62.ptr.us.xo.net) |
| 15:56.23 | *** join/#cubieboard carlos-huang (~carlos@220.112.3.148) |
| 16:08.08 | *** join/#cubieboard toketin (~marco@2-234-57-20.ip221.fastwebnet.it) |
| 16:11.48 | retrosenator | anyone able to run the sunxi-mali test program? |
| 16:15.57 | *** join/#cubieboard akaizen (~akaizen@108-78-253-15.lightspeed.sntcca.sbcglobal.net) |
| 16:36.38 | *** join/#cubieboard deasy (~deasy@host-85-201-190-191.brutele.be) |
| 16:39.44 | *** join/#cubieboard thesheff17 (~thesheff1@67.106.72.62.ptr.us.xo.net) |
| 16:49.40 | *** join/#cubieboard thesheff17 (~thesheff1@67.106.72.62.ptr.us.xo.net) |
| 16:52.36 | *** join/#cubieboard asie (~textual@078088168214.elblag.vectranet.pl) |
| 16:56.34 | *** join/#cubieboard astrapotro (~mikel@33.85-87-8.dynamic.clientes.euskaltel.es) |
| 17:09.06 | *** join/#cubieboard toketin (~marco@2.192.28.249) |
| 17:16.38 | *** join/#cubieboard DV (~veillard@2001:41d0:1:d478::1) |
| 17:31.41 | *** join/#cubieboard marco (~marco@2.192.28.249) |
| 17:32.52 | *** join/#cubieboard marco__ (~marco@2.192.28.249) |
| 17:33.15 | *** join/#cubieboard madmax (x@189-106-222-129.user.veloxzone.com.br) |
| 17:33.43 | *** join/#cubieboard Gumboot_ (~sh1@c-76-102-17-103.hsd1.ca.comcast.net) |
| 17:39.01 | *** join/#cubieboard old-papa (~ident@206.251.40.208) |
| 17:40.24 | *** join/#cubieboard oatley (~oatley@142.204.133.79) |
| 17:46.39 | *** join/#cubieboard asie (~textual@078088168214.elblag.vectranet.pl) |
| 17:55.22 | *** join/#cubieboard akaizen (~akaizen@limelabs.static.monkeybrains.net) |
| 18:14.45 | *** join/#cubieboard thesheff17 (~thesheff1@67.106.72.62.ptr.us.xo.net) |
| 18:17.14 | *** join/#cubieboard syeekick (~syeekick@cpc8-gtya4-2-0-cust151.4-4.cable.virginm.net) |
| 18:17.19 | syeekick | hey |
| 18:18.37 | syeekick | if i wanted to search google for something yet using cubieboard in the search term doesn't yeild results. Is there a product that is very very simlar in specification and the tutorials would work for said question? |
| 18:19.20 | *** join/#cubieboard akaizen (~akaizen@limelabs.static.monkeybrains.net) |
| 18:21.09 | *** join/#cubieboard hyperi0n (~hyperi0n@unaffiliated/oxmoz) |
| 18:27.45 | syeekick | is there any way you can brick the cubie truck? |
| 18:30.39 | rm | <PROTECTED> |
| 18:30.48 | rm | but really |
| 18:30.51 | rm | what is the question |
| 18:31.05 | rm | if it's something rather generic, maybe even a Raspberry Pi tutorial will work |
| 18:31.23 | rm | <PROTECTED> |
| 18:31.55 | *** join/#cubieboard marco__ (~marco@2-234-57-20.ip221.fastwebnet.it) |
| 18:38.21 | *** join/#cubieboard rellla (~rellla@lvps176-28-13-64.dedicated.hosteurope.de) |
| 18:49.16 | *** join/#cubieboard OutOfLine (~user@82-220-73-113.dslplus.solnet.ch) |
| 19:04.38 | *** join/#cubieboard retrosenator (~sean@121.54.58.193) |
| 19:04.40 | *** join/#cubieboard toketin (~marco@2-234-57-20.ip221.fastwebnet.it) |
| 19:05.14 | *** join/#cubieboard uRandomMM (40c71302@gateway/web/freenode/ip.64.199.19.2) |
| 19:12.11 | *** join/#cubieboard akaizen (~akaizen@limelabs.static.monkeybrains.net) |
| 19:16.19 | *** join/#cubieboard laurent\ (~laurent@unaffiliated/laurent/x-4048133) |
| 19:29.47 | *** join/#cubieboard tat (~tat@port-83-236-202-28.static.qsc.de) |
| 19:29.55 | *** join/#cubieboard retrosenator (~sean@121.54.58.193) |
| 19:31.21 | *** join/#cubieboard toketin (~marco@2-234-57-20.ip221.fastwebnet.it) |
| 19:36.38 | *** join/#cubieboard toketin (~marco@2-234-57-20.ip221.fastwebnet.it) |
| 19:39.58 | retrosenator | when I try to install xserver-xorg-video-sunximali it wants to remove about 50 packages! |
| 19:58.02 | *** join/#cubieboard TheSeven (~quassel@rockbox/developer/TheSeven) |
| 20:00.30 | *** join/#cubieboard smccarthy2 (~smccarthy@208.99.166.84) |
| 20:21.24 | *** join/#cubieboard emsyr (~emsyr@ppp089210051178.access.hol.gr) |
| 20:22.22 | *** join/#cubieboard madmaxx (x@unaffiliated/madmaxx) |
| 20:30.00 | *** join/#cubieboard Guest29613 (~tat@37.120.6.181) |
| 20:40.32 | *** join/#cubieboard Baronawesome (~Alphard@unaffiliated/baronawesome) |
| 20:47.49 | *** join/#cubieboard sarwarc (~livingsto@115.248.45.78) |
| 20:55.11 | *** join/#cubieboard VargaD (~VargaD@188-143-56-239.pool.digikabel.hu) |
| 20:56.49 | *** part/#cubieboard astrapotro (~mikel@33.85-87-8.dynamic.clientes.euskaltel.es) |
| 21:00.59 | *** join/#cubieboard smccarthy (~smccarthy@208.99.166.84) |
| 21:05.43 | *** join/#cubieboard thesheff17 (~thesheff1@67.106.72.62.ptr.us.xo.net) |
| 21:23.21 | *** join/#cubieboard retrosenator (~sean@121.54.58.140) |
| 21:23.42 | retrosenator | I followed: http://cubian.org/2013/09/29/install-lxde-with-opengles-accelerated-on-cubian/ |
| 21:24.29 | retrosenator | when I go to apt-get lxde, it removes xserver-xorg-video-sunximali |
| 21:24.55 | retrosenator | and when I run xinit: (EE) module ABI major version (12) doesn't match the server's version (15) |
| 21:52.21 | *** join/#cubieboard rundfunk (~rundfunk@h-109-40.a163.priv.bahnhof.se) |
| 21:59.03 | *** join/#cubieboard marco__ (~marco@2-234-57-20.ip221.fastwebnet.it) |
| 22:08.29 | syeekick | thanks rm |
| 22:09.50 | syeekick | would kali linux work on th cubieboard quite well? also how superior is the graphics chip on the cubieboard 2 compared to the cubieboard 3 |
| 22:27.54 | *** join/#cubieboard akaizen (~akaizen@limelabs.static.monkeybrains.net) |
| 22:29.47 | retrosenator | which egl library do I use to link with the sunxi glesv2 library? |
| 22:35.10 | retrosenator | gah, finally after editing the makefile and adding about 5 libraries |
| 22:35.36 | retrosenator | I have a triangle |
| 22:37.08 | *** join/#cubieboard setkeh (~setkeh@unaffiliated/setkeh) |
| 22:37.22 | retrosenator | how do I get eglut for this? |
| 22:38.00 | *** join/#cubieboard lerc (~quassel@121-74-228-250.telstraclear.net) |
| 22:41.44 | *** join/#cubieboard akaizen (~akaizen@limelabs.static.monkeybrains.net) |
| 22:43.32 | retrosenator | the mesa eglut depends on the mesa egl too much to work |
| 22:49.17 | *** join/#cubieboard oatley (~oatley@142.204.133.79) |
| 23:14.49 | retrosenator | glmark2 fails to configure because egl and gles libraries are not installed as a proper package |
| 23:15.25 | *** join/#cubieboard AndrevS (~andrevs@2001:980:55e0:1:2e44:fdff:fe65:84ee) |