| 00:01.05 | *** join/#cubieboard asterick (~asterick@c-98-234-239-235.hsd1.ca.comcast.net) |
| 00:16.31 | *** part/#cubieboard mkutsevol (~mkutsevol@jabber.coolvds.com) |
| 00:21.45 | *** join/#cubieboard focus (~Doug@host81-149-149-147.in-addr.btopenworld.com) |
| 00:39.54 | *** join/#cubieboard zn414 (~zn414@175.157.80.184) |
| 00:39.54 | *** join/#cubieboard zn414 (~zn414@unaffiliated/zn414) |
| 00:40.17 | *** join/#cubieboard imRance (~Rance@182.242.233.58) |
| 00:48.07 | *** join/#cubieboard smccarthy (~smccarthy@ip72-211-134-229.tc.ph.cox.net) |
| 01:09.53 | *** part/#cubieboard Cpt-Oblivious (~chatzilla@31-151-87-204.dynamic.upc.nl) |
| 01:18.16 | *** join/#cubieboard t3st3r (~t3st3r@gateway/tor-sasl/t3st3r) |
| 01:36.08 | *** join/#cubieboard stefanro1 (~stefan@pD958A6A4.dip0.t-ipconnect.de) |
| 03:13.30 | *** join/#cubieboard carlos-huang (~carlos@220.112.1.78) |
| 04:40.55 | *** join/#cubieboard JohnDoe_71Rus (~Miranda@unaffiliated/johndoe-71rus/x-4170227) |
| 04:45.58 | *** join/#cubieboard TheSeven (~quassel@rockbox/developer/TheSeven) |
| 04:58.55 | *** join/#cubieboard old-papa (ident@206.251.40.208) |
| 05:02.47 | *** join/#cubieboard AdvancedNewbie (~AdvancedN@stjhnf0148w-142134218010.dhcp-dynamic.FibreOp.nl.bellaliant.net) |
| 06:32.39 | *** join/#cubieboard caveat- (hoax@2a01:4f8:191:9111:30::10) |
| 06:47.43 | *** join/#cubieboard DV (~veillard@libvirt.org) |
| 07:25.09 | *** join/#cubieboard old-papa (ident@206.251.40.208) |
| 07:37.25 | *** join/#cubieboard mkutsevol (~mkutsevol@jabber.coolvds.com) |
| 07:41.44 | *** join/#cubieboard old-papa (ident@206.251.40.208) |
| 07:48.41 | *** join/#cubieboard mifritscher (~michi@p5DDE649B.dip0.t-ipconnect.de) |
| 07:53.48 | *** join/#cubieboard kroylar (~kroylar@71-92-213-13.static.mtpk.ca.charter.com) |
| 08:05.19 | *** join/#cubieboard Swat- (~Swat-@vps.frasa.net) |
| 08:21.21 | *** join/#cubieboard stefanro (~stefan@pD958A6A4.dip0.t-ipconnect.de) |
| 08:23.43 | *** join/#cubieboard imRance1 (~Rance@220.165.238.42) |
| 08:34.05 | *** join/#cubieboard ninjak (~ninjak@77.239.137.142) |
| 08:55.38 | *** join/#cubieboard zn414 (~zn414@unaffiliated/zn414) |
| 09:18.57 | *** join/#cubieboard mifritscher (~michi@zft-server-1.telematik-zentrum.de) |
| 09:39.37 | *** join/#cubieboard popolon (~popolon@unaffiliated/popolon) |
| 10:18.10 | *** join/#cubieboard rellla (~rellla@p5B078BD5.dip0.t-ipconnect.de) |
| 10:33.27 | *** join/#cubieboard nighty^ (~nighty@lns-bzn-49f-62-147-170-46.adsl.proxad.net) |
| 10:35.05 | *** join/#cubieboard kludge` (~comet@unaffiliated/espiral) |
| 10:42.04 | *** join/#cubieboard wickwire (~wickwire@a81-84-184-53.cpe.netcabo.pt) |
| 11:03.12 | Faisal | guys, what distribution do you recommend for the cubietruck ? |
| 11:17.01 | *** part/#cubieboard mkutsevol (~mkutsevol@jabber.coolvds.com) |
| 11:28.37 | *** join/#cubieboard jluisn (~quassel@187.115.172.24) |
| 11:32.56 | *** join/#cubieboard arete74_ (~arete74@2-226-90-244.ip180.fastwebnet.it) |
| 11:34.30 | *** join/#cubieboard cubie74 (~arete74@2-226-90-244.ip180.fastwebnet.it) |
| 11:37.33 | *** join/#cubieboard cubie74 (~arete74@2-226-90-244.ip180.fastwebnet.it) |
| 11:39.17 | *** join/#cubieboard coba (~Adium@security.russlavbank.com) |
| 11:39.59 | *** join/#cubieboard coba (~Adium@security.russlavbank.com) |
| 11:40.16 | coba | good day guys |
| 11:40.35 | coba | anyone tried cubieboard with usb ethernet, works well? |
| 11:40.49 | coba | I simply need two eth device. |
| 11:43.04 | *** join/#cubieboard arete74 (~arete74@2-226-90-244.ip180.fastwebnet.it) |
| 11:45.04 | *** join/#cubieboard coba (~coba@sigaba.sigsegv.ru) |
| 11:47.35 | rjd_ | coba: they have to be physical? |
| 11:48.02 | joph | coba, what about a managed switch and using vlan? |
| 11:48.13 | coba | no, switch is too big ;( |
| 11:48.35 | coba | yea, using switch is easiest thing, I know :) |
| 11:49.19 | coba | i have 2 plugs, LAN and WAN+pppoe |
| 11:49.57 | coba | im using LAN for cisco AP on other side of home with ethernet over power line adapters |
| 11:52.08 | coba | so I think that usb eth adaper would be ok for me. |
| 11:52.33 | coba | major thing what im thinking of is power for wifi and 2x ethernet's, is it enough? |
| 11:53.33 | coba | i read some posts where guys telling that its possible to get into the situation when voltage is not enough |
| 11:53.47 | coba | maybe thats rumors, I dont know yet :/ |
| 12:01.52 | rjd_ | no, you need a powered usb hub for even many of the wifi plugs |
| 12:01.53 | rjd_ | not all, but some |
| 12:04.26 | *** join/#cubieboard t3st3r (~t3st3r@gateway/tor-sasl/t3st3r) |
| 12:14.03 | coba | so, onboard wifi on cubie3 will work fine but for additional usb devices I should just power injection on usb hub? right? |
| 12:14.46 | coba | s/just/use additional |
| 12:15.12 | *** join/#cubieboard wooy (~wooy@188.175.124.11) |
| 12:16.09 | rjd_ | not sure about cubie3, but most small low power arm computers wont have power for much |
| 12:16.17 | rjd_ | something like 200 mAh in the usb port |
| 12:19.35 | *** join/#cubieboard ganbold_ (~Ganbold@173.244.215.173) |
| 12:21.25 | *** join/#cubieboard w00y (~wooy@unaffiliated/wooy) |
| 12:22.12 | *** join/#cubieboard RA3OR (~demon@unaffiliated/ra3or) |
| 12:27.41 | *** join/#cubieboard bizarro_1 (~bizarro_1@122.Red-83-49-227.dynamicIP.rima-tde.net) |
| 12:43.54 | *** join/#cubieboard w00y (~wooy@unaffiliated/wooy) |
| 12:46.18 | *** part/#cubieboard coba (~coba@sigaba.sigsegv.ru) |
| 12:57.55 | *** join/#cubieboard tpaper (~tpaper@unaffiliated/paper8) |
| 13:45.10 | *** join/#cubieboard old-papa (~ident@206.251.40.208) |
| 13:45.46 | *** join/#cubieboard rmull (~rmull@nooperation.org) |
| 13:48.05 | *** join/#cubieboard nighty^ (~nighty@lns-bzn-49f-62-147-170-46.adsl.proxad.net) |
| 13:49.21 | *** join/#cubieboard twinshadow (~t@198.199.111.203) |
| 13:50.35 | *** join/#cubieboard Juzzy (Xinu@24-151-202-127.dhcp.jcsn.tn.charter.com) |
| 13:55.17 | *** join/#cubieboard froy (~troy@manuel.dublan.net) |
| 13:55.47 | *** join/#cubieboard discopig (~pig@unaffiliated/discopig) |
| 13:57.21 | *** join/#cubieboard AdvancedNewbie (~AdvancedN@stjhnf0148w-142134218010.dhcp-dynamic.FibreOp.nl.bellaliant.net) |
| 14:13.46 | *** join/#cubieboard stefanro (~stefan@pD958A6A4.dip0.t-ipconnect.de) |
| 14:31.05 | Faisal | guys, what distribution do you recommend for the cubietruck ? |
| 14:42.24 | *** join/#cubieboard rmull (~rmull@nooperation.org) |
| 14:46.47 | jelly | what's a cubie3? |
| 14:52.07 | *** join/#cubieboard _Vi (~vi@2001:470:7bd6:c000::2) |
| 15:03.58 | *** join/#cubieboard nils_2_ (~nils_2@unaffiliated/nils-2/x-2480262) |
| 15:04.41 | *** join/#cubieboard stefanro (~stefan@pD958A6A4.dip0.t-ipconnect.de) |
| 15:08.28 | *** join/#cubieboard Chlo_ (~pi@brln-4db948a5.pool.mediaWays.net) |
| 15:10.49 | *** join/#cubieboard Chloe (Koyaanis@brln-4db948a5.pool.mediaWays.net) |
| 15:39.16 | Faisal | its a cubietruck |
| 15:45.43 | *** join/#cubieboard wooy (~wooy@unaffiliated/wooy) |
| 15:55.52 | *** join/#cubieboard smccarthy (~smccarthy@208.99.166.84) |
| 16:11.55 | *** join/#cubieboard herdingcat (~huli@219.141.159.54) |
| 16:17.08 | *** join/#cubieboard thesheff17 (~thesheff1@24-148-57-183.c3-0.lem-ubr1.chi-lem.il.cable.rcn.com) |
| 16:23.25 | *** join/#cubieboard smccarthy2 (~smccarthy@208.99.166.84) |
| 16:27.23 | *** join/#cubieboard maour (~maour@unaffiliated/maour) |
| 16:30.56 | *** join/#cubieboard wickwire (5154b835@gateway/web/freenode/ip.81.84.184.53) |
| 16:31.55 | wickwire | Hi guys, my cubie A20 running android isn't being recognized with adb devices |
| 16:32.23 | wickwire | is there anything I need to do in order to have adb working? |
| 16:32.55 | wickwire | I have had issues with the preloaded android image in the NAND, so I have recently installed the latest NAND image from the cubieboard site |
| 16:33.01 | wickwire | and everything works on android |
| 16:33.09 | wickwire | I just can't seem to have adb pick it up |
| 16:33.15 | wickwire | on windows or linux |
| 16:33.25 | wickwire | I have developer mode enabled |
| 16:43.12 | *** join/#cubieboard smccarthy (~smccarthy@208.99.166.84) |
| 17:16.55 | *** join/#cubieboard Siras (4fc7cc47@gateway/web/freenode/ip.79.199.204.71) |
| 17:17.37 | Siras | Hi, is anyone online to answer a quick question? |
| 17:18.19 | Siras | I just wanted to know, if it is possible to DISable wifi/bt on the cubietruck using lubuntu |
| 17:25.01 | *** join/#cubieboard rz2k (~rz2k@188.244.38.171) |
| 17:31.36 | *** join/#cubieboard zn414 (~zn414@unaffiliated/zn414) |
| 18:31.47 | *** join/#cubieboard mifritscher (~michi@p5DDE649B.dip0.t-ipconnect.de) |
| 18:48.52 | *** join/#cubieboard uizex1 (~uiz@185.32.109.211) |
| 18:58.45 | *** mode/#cubieboard [+o jelly-home] by ChanServ |
| 18:59.05 | *** mode/#cubieboard [+b $x *!*@*.jazztel.es#0] by jelly-home |
| 18:59.15 | *** mode/#cubieboard [-o jelly-home] by jelly-home |
| 19:00.42 | jelly-home | (linkspam going around) |
| 19:01.16 | *** join/#cubieboard rz2k (~rz2k@188.244.38.171) |
| 19:16.26 | *** join/#cubieboard Faisal__ (~IRCSHOARE@212.17.34.54) |
| 19:17.18 | *** join/#cubieboard asterick (~asterick@1awesm.static.monkeybrains.net) |
| 19:44.53 | *** join/#cubieboard _Vi (~vi@2001:470:7bd6:c000::2) |
| 19:58.22 | *** join/#cubieboard maour (~maour@2.180.116.150) |
| 19:58.22 | *** join/#cubieboard maour (~maour@unaffiliated/maour) |
| 20:14.37 | *** join/#cubieboard nighty^ (~nighty@lns-bzn-49f-62-147-170-46.adsl.proxad.net) |
| 20:17.00 | *** join/#cubieboard pacopad (~pascalleb@18-165-190-109.dsl.ovh.fr) |
| 20:18.59 | pacopad | Hi Guys , i got problems with mali drivers when i try to launch an opengles app |
| 20:19.00 | pacopad | LibEGL warning DRI failed to open lima |
| 20:19.26 | Chloe | del sys 32 |
| 20:20.44 | pacopad | @Chloe : is it a message for me ? |
| 20:21.01 | Chloe | :< |
| 20:21.18 | pacopad | sorry |
| 20:21.26 | Chloe | i was just .. joking ok |
| 20:21.42 | pacopad | no problem :) |
| 20:22.29 | pacopad | so what about my mali problem , any ideas ? |
| 20:22.59 | Chloe | no |
| 20:23.01 | Chloe | i dont evne use linux |
| 20:23.34 | Chloe | its inferior in any means except the part where it uses less resources (obviously it has like 1/10 the features windows has) |
| 20:26.37 | Chloe | debate me bitches |
| 20:36.46 | *** join/#cubieboard thesheff17 (~thesheff1@216.21.38.170) |
| 20:43.18 | undrwater | Chloe: have a windows image for cubieboard? |
| 20:44.33 | Chloe | No undrwater |
| 20:44.35 | Chloe | you cant ask shit like that |
| 20:44.42 | Chloe | the real question here is: can the cubieboard handle windows? |
| 20:44.57 | Chloe | (it cant) |
| 20:45.01 | undrwater | can't ask that question either....unless there's an image |
| 20:45.19 | Chloe | Theres also no 50 inches long dildo |
| 20:45.23 | Chloe | because no one would be able to use it. |
| 20:47.22 | undrwater | are you saying windows is so poorly coded that it wouldn't run on an arm device? |
| 20:48.44 | Chloe | <Chloe> its inferior in any means except the part where it uses less resources (obviously it has like 1/10 the features windows has) |
| 20:50.14 | undrwater | Chloe: how has your day been? |
| 20:50.16 | jelly-home | Chloe: do you have any cubietech hardware related question or issue? |
| 20:51.38 | Chloe | Great |
| 20:51.46 | Chloe | no jelly |
| 20:52.38 | jelly-home | it might be a better idea to just lurk for a while then, instead |
| 20:53.24 | Chloe | i do whatever teh fuci like |
| 20:55.51 | jelly-home | Chloe: no reason to be impolite doing it |
| 20:57.50 | Chloe | oh gad |
| 20:57.57 | Chloe | i cant stand this cancerous friendlyness of linux fags |
| 20:59.28 | *** mode/#cubieboard [+o jelly-home] by ChanServ |
| 20:59.35 | *** mode/#cubieboard [+b *!*@brln-4db948a5.pool.mediaWays.net] by jelly-home |
| 20:59.35 | *** kick/#cubieboard [Chloe!~me@pdpc/supporter/active/jelly] by jelly-home (Chloe) |
| 20:59.44 | *** mode/#cubieboard [-o jelly-home] by ChanServ |
| 21:00.03 | pacopad | thank you jelly |
| 21:00.07 | jelly-home | can't stand people throwing shits, dildos and fucks around |
| 21:01.22 | undrwater | i don't mind all that...just mind it for the intention of provocation |
| 21:01.45 | jelly-home | I try to give them a couple chances to be nice, but if they don't get two-three hints in a row and shape up, it's obvious they never will |
| 22:01.39 | *** join/#cubieboard JMoS (~Ernest@2a01:e34:ed85:8a20:215:58ff:fec4:f56b) |
| 22:03.35 | JMoS | Hi all! I got the following error =>>> [ 15.690224] #1: sunxi-sndhdmi |
| 22:03.35 | JMoS | VFS: Cannot open root device "nfs/" or unknown-block(0,0): error -6 |
| 22:03.35 | JMoS | Please append a correct "root=" boot option; here are the available partitions: |
| 22:03.35 | JMoS | b300 7864320 mmcblk0 driver: mmcblk |
| 22:03.35 | JMoS | <PROTECTED> |
| 22:03.36 | JMoS | <PROTECTED> |
| 22:03.38 | JMoS | <0>Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) |
| 22:03.40 | JMoS | [ 15.744058] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) |
| 22:04.31 | JMoS | I first think that was the init file which was missing but I added a basic one displaying a simple "hello" message |
| 22:05.12 | JMoS | Then I modified the fstab of the rootfs on my NFS server to have a device entry for it |
| 22:05.29 | JMoS | but that failed too |
| 22:06.43 | JMoS | What I understand about that, is that the system try to boot from the uSD card. But nowhere I wrote something like this so if someone as a clue? |
| 22:07.51 | *** join/#cubieboard RA3OR (~demon@unaffiliated/ra3or) |
| 22:08.28 | JMoS | I have compiled the kernel with NFS client support so the uImage file should be able to use it at least that works with the bootloader process |
| 22:10.58 | rz2k | JMoS: http://linux-sunxi.org/How_to_boot_the_A10_or_A20_over_the_network |
| 22:13.02 | JMoS | rz2k: thanks, but I already read it and follow steps but it does not work after many tries... I do something wrong but I cannot state where? |
| 22:13.42 | rz2k | so you have error -7 |
| 22:13.44 | rz2k | -6* |
| 22:13.47 | rz2k | which is #define ENXIO 6 |
| 22:13.57 | rz2k | /* No such device or address */ |
| 22:16.06 | JMoS | exactly, I think it doesn't setup NFS before and when it try to get it it fail and after 10 try get to a failed state, could you confirm my believe? |
| 22:16.45 | rz2k | please check for your kernel config - kernel network autoconfiguration (dhcp/bootp/rarp), nfs client and etc |
| 22:16.55 | rz2k | I bet you've missed something obvious |
| 22:17.05 | rz2k | because many guys are debugging kernel using TFP+NFS |
| 22:17.17 | rz2k | this is a common setup |
| 22:19.08 | *** join/#cubieboard arete74 (~arete74@2-226-90-244.ip180.fastwebnet.it) |
| 22:19.25 | JMoS | ok, I will check it again, but in my .config file I had all the 3 setup to Y as well as CONFIG_IP_PNP & CONFIG_ROOT_NFS |
| 22:19.45 | JMoS | I found this http://www.baanboard.com/programmers_manual_baanerp_help_errors_6_ENXIO it could be a permission error... |
| 22:19.55 | JMoS | go to check my rootfs |
| 22:20.43 | rz2k | also provide better logs, only the error is not enough, we dont know if you set up the network for the kernel itself for example, thats why I said about kernel network autoconfig |
| 22:21.05 | rz2k | pastebin your kernel log |
| 22:21.50 | *** join/#cubieboard Midnightmyth (~quassel@93-167-84-102-static.dk.customer.tdc.net) |
| 22:22.02 | Midnightmyth | why is cubieboard3 so expensive? |
| 22:23.37 | rz2k | because it has wifi/bluetooth hybrid-ic, 12v psu with possibility of running from 3.7v lipo, 2GB ram and an acrylic case |
| 22:24.22 | rz2k | and gigabit ether (which also needs newer components to run) |
| 22:24.44 | rz2k | thus it adds up that $30-40 to the cubieboard2 price. |
| 22:28.00 | JMoS | rz2k> when you talk about kernel log you mean the data displayed into my serial connection window beacause at this stage nothing is loaded or written to the NFS disk, no? |
| 22:30.49 | JMoS | Ok, made a mistake kern.log is populated |
| 22:32.15 | rz2k | yes, your serial connection |
| 22:32.32 | rz2k | which will show how you load the u-boot and then start kernel (which fails with the lane you posted) |
| 22:37.49 | Midnightmyth | are the cubieboard2 any closer to upstream support? |
| 22:40.32 | rz2k | Midnightmyth: upstream is here https://github.com/jwrdegoede/linux-sunxi/commits/sunxi-devel |
| 22:42.53 | rz2k | we now have: sdmmc, clock muxing, uart, i2c, usbhost, watchdog, rtc, sata, lrdac, touchscreen, gpios, various standard ARM stuff like PSCI/hstimers/virtualization, |
| 22:43.19 | rz2k | missing things: DMAengine, SPI, whole HDMI/LCD/RGB TTL part |
| 22:46.12 | JMoS | here is the log : http://pastebin.com/qiZhDFrh, will paste the beginning when uboot start |
| 22:46.58 | Midnightmyth | still far from done then rz2k |
| 22:48.48 | rz2k | Midnightmyth: not sure, I run a little testground on mainline kernel featuring latest linaro-server and mainline kernel, works well, hangs sometimes ofcourse, but it does boot without anything attached except the power. half a year ago there was only one way to boot the kernel - send it over network to u-boot/dump over serial as binary. |
| 22:48.59 | rz2k | I mean it is usable right now |
| 22:49.52 | Midnightmyth | I would love to buy a cubie, but I will wait until Im sure it works with mainline kernel... |
| 22:50.11 | Midnightmyth | basicly I would love to see the sata driver getting done |
| 22:50.24 | JMoS | 1st part of the serial log : http://pastebin.com/Pq95xU38 |
| 22:51.28 | Midnightmyth | advantage of cubieboard is the sata and price |
| 22:56.27 | buZz | wow |
| 22:56.27 | buZz | https://gitorious.org/retroarch/retroarch-lima |
| 23:36.06 | *** join/#cubieboard Faisal (~IRCSHOARE@212.17.34.54) |
| 23:39.25 | *** join/#cubieboard t3st3r (~t3st3r@gateway/tor-sasl/t3st3r) |