| 00:07.15 | *** join/#cubieboard TheSeven (~quassel@rockbox/developer/TheSeven) |
| 00:10.32 | *** join/#cubieboard ricardocrudo (~crudo@201.83.201.129) |
| 00:26.31 | *** join/#cubieboard stefanro (~stefan@pD958A085.dip0.t-ipconnect.de) |
| 00:47.54 | *** join/#cubieboard bigx (~bigx@cam44-2-82-235-243-114.fbx.proxad.net) |
| 00:51.58 | *** join/#cubieboard CubieSSH (322ecc4e@gateway/web/freenode/ip.50.46.204.78) |
| 00:53.53 | CubieSSH | I hope somebody can help me. I'm trying to ssh into my cubieboard I'm using the command "ssh ttyUSB0 and all I get is a cursor and no activity. |
| 00:56.48 | CubieSSH | Oh and I did make sure that ttyUSB0 is the correct terminal device. |
| 00:58.15 | \\Mr_C\\ | you tried switching the rx and tx wires around? |
| 00:58.21 | \\Mr_C\\ | and set baud to 115200? |
| 00:58.35 | \\Mr_C\\ | oh wait |
| 00:58.38 | \\Mr_C\\ | nm |
| 00:59.04 | \\Mr_C\\ | ttyusb0 is a serial port |
| 00:59.13 | \\Mr_C\\ | use a terminal not ssh |
| 00:59.27 | CubieSSH | no I haven't tried to switch the wires |
| 00:59.44 | CubieSSH | should I use the cu? |
| 00:59.47 | \\Mr_C\\ | are you doing this through a serial cable right? |
| 01:00.07 | CubieSSH | yes I'm going serial cable |
| 01:00.30 | \\Mr_C\\ | cu -s 115200 -l /dev/ttyUSB0 |
| 01:01.27 | CubieSSH | okay I'll try that gotta write that down I was trying to install arch linux man it's a doozy! |
| 01:02.54 | CubieSSH | Thanx for your help \\Mr_C\\ if it doesn't work I'll be back. |
| 01:02.59 | \\Mr_C\\ | ok |
| 01:03.21 | *** join/#cubieboard KiSM (~KiSM@CPE-120-145-13-5.lnse2.wel.bigpond.net.au) |
| 01:34.29 | *** join/#cubieboard smccarthy (~smccarthy@ip72-223-13-70.ph.ph.cox.net) |
| 01:39.14 | *** join/#cubieboard rundfunk (~rundfunk@90-225-32-29-no99.bredband.skanova.com) |
| 02:07.36 | *** join/#cubieboard delusr_ (~chatzilla@CPE-58-169-177-167.lns5.cha.bigpond.net.au) |
| 02:12.43 | *** join/#cubieboard HighJinx (~HighJinx@cpe-172-248-212-46.socal.res.rr.com) |
| 02:43.25 | *** join/#cubieboard niftylettuce (uid2733@gateway/web/irccloud.com/x-zgjtwfprgrvsanvx) |
| 03:16.18 | *** join/#cubieboard nils_2_ (~nils_2@unaffiliated/nils-2/x-2480262) |
| 03:26.44 | *** join/#cubieboard [7] (~quassel@rockbox/developer/TheSeven) |
| 03:42.06 | *** join/#cubieboard \\Mr_C\\ (mrc@adsl-98-89-27-192.mgm.bellsouth.net) |
| 04:24.18 | *** join/#cubieboard Titankiller (~titankill@180.151.40.151) |
| 04:31.24 | *** join/#cubieboard jschneider (~jschneide@80.149.172.178) |
| 05:14.19 | *** join/#cubieboard rz2k (~rz2k@95-25-157-70.broadband.corbina.ru) |
| 05:52.15 | *** join/#cubieboard user_2 (~user@86.33.168.109.dsl.static.ip.kpnqwest.it) |
| 06:20.09 | *** join/#cubieboard Al_Cho (al_cho@nat/novell/x-idwwouyjkakbulju) |
| 06:28.10 | *** join/#cubieboard alexd (~alexd@port-92-205-64-169.dynamic.qsc.de) |
| 06:28.23 | *** join/#cubieboard alexd (~alexd@port-92-205-64-169.dynamic.qsc.de) |
| 06:36.48 | *** join/#cubieboard n01 (~n01@93-57-16-194.ip162.fastwebnet.it) |
| 06:37.50 | *** join/#cubieboard n01 (~n01@93-57-16-194.ip162.fastwebnet.it) |
| 06:46.48 | *** join/#cubieboard n01 (~n01@93-57-16-194.ip162.fastwebnet.it) |
| 07:05.46 | *** join/#cubieboard rundfunk (~rundfunk@90-225-32-29-no99.bredband.skanova.com) |
| 07:11.38 | *** join/#cubieboard Andrew____ (~quassel@115-64-196-6.static.tpgi.com.au) |
| 07:11.49 | Andrew____ | !ls |
| 07:18.04 | *** join/#cubieboard irreplaceable (~janus@mnch-5d86ea63.pool.mediaWays.net) |
| 07:21.04 | *** join/#cubieboard Andrew____ (~quassel@115-64-196-6.static.tpgi.com.au) |
| 07:21.38 | *** join/#cubieboard Andrew____ (~quassel@115-64-196-6.static.tpgi.com.au) |
| 07:30.44 | *** join/#cubieboard Martix_ (~martix@static-84-242-103-180.net.upcbroadband.cz) |
| 07:45.00 | *** join/#cubieboard rellla (~rellla@p5B0784FC.dip0.t-ipconnect.de) |
| 07:55.48 | *** join/#cubieboard rellla (~rellla@p5B0784FC.dip0.t-ipconnect.de) |
| 08:26.35 | *** join/#cubieboard rellla2 (~rellla@p4FE1C83B.dip0.t-ipconnect.de) |
| 08:32.24 | *** join/#cubieboard err404 (~err404@mna75-11-88-161-199-178.fbx.proxad.net) |
| 09:02.24 | *** join/#cubieboard Evgeny (6d7b918e@gateway/web/freenode/ip.109.123.145.142) |
| 09:30.20 | *** join/#cubieboard deasy (~deasy@109.88.190.110) |
| 09:37.39 | *** join/#cubieboard kludge` (~comet@unaffiliated/espiral) |
| 09:46.40 | *** join/#cubieboard jayrambhia (~jay@183.82.196.166) |
| 09:46.49 | jayrambhia | !ls |
| 09:49.53 | jayrambhia | has anyone worked with opencv on cubieboard? My setup is done and everything is running. I have some issues regarding performance. |
| 09:50.59 | jayrambhia | I am running a simple code which reads same image in a loop. I have added a scanf function after which it reads the image. |
| 09:51.17 | jayrambhia | when the program starts it takes upto 500 msec to read the image |
| 09:51.50 | jayrambhia | but the quicker I give input to scanf, the quicker it gets. It reads image in 40 msec. |
| 09:52.05 | jayrambhia | Does anyone know what's going on here? |
| 10:00.57 | *** join/#cubieboard rellla2 (~rellla@p4FE1C83B.dip0.t-ipconnect.de) |
| 10:38.57 | *** join/#cubieboard backb0ne (~backb0ne@251.157.165.83.dynamic.mundo-r.com) |
| 11:38.55 | *** join/#cubieboard datagutt_ (~datagutt@unaffiliated/datagutt) |
| 11:50.20 | *** join/#cubieboard HighJinx (~HighJinx@cpe-172-248-212-46.socal.res.rr.com) |
| 12:06.51 | *** join/#cubieboard ricardocrudo (~crudo@187.121.47.182) |
| 12:09.42 | *** join/#cubieboard h0cin (~h0cin@unaffiliated/h0cin) |
| 12:21.35 | *** join/#cubieboard naobsd (7c294571@gateway/web/freenode/ip.124.41.69.113) |
| 12:36.01 | *** join/#cubieboard emilepetrone (~emilepetr@c-76-105-221-23.hsd1.or.comcast.net) |
| 12:54.40 | *** join/#cubieboard tinti (~tinti@pdpc/supporter/student/tinti) |
| 13:17.53 | *** join/#cubieboard Cy-Gor (~Brian@cpe-70-124-70-140.austin.res.rr.com) |
| 13:18.40 | *** join/#cubieboard papito00 (ba2150e6@gateway/web/freenode/ip.186.33.80.230) |
| 13:18.50 | papito00 | good mornig |
| 13:19.19 | papito00 | i am interested in powering cubieboard on battery |
| 13:19.31 | papito00 | wich do you recomend? |
| 13:21.05 | buZz | li+ |
| 13:21.24 | buZz | papito00: cubietruck, an upcoming revision, has battery support built into the board |
| 13:22.20 | papito00 | can't cubiebox2 be connected to any battery?? |
| 13:22.27 | papito00 | at all? |
| 13:22.34 | buZz | of course it can |
| 13:22.44 | *** join/#cubieboard KiSM (~KiSM@CPE-120-145-13-5.lnse2.wel.bigpond.net.au) |
| 13:22.47 | buZz | you just need to turn the output of the battery into nice clean 5v |
| 13:22.54 | buZz | the cubietruck does that by itself |
| 13:23.06 | buZz | what is cubiebox2 btw? |
| 13:23.36 | papito00 | oook, my main question is, wich battery is suitable, i need it to be small |
| 13:23.51 | papito00 | i saw a revision |
| 13:24.13 | papito00 | a20 chip |
| 13:24.19 | papito00 | dualcore |
| 13:24.23 | papito00 | dual mali |
| 13:25.00 | papito00 | cubie regulate the voltage, is that what you mean? |
| 13:26.34 | buZz | cubietruck regulates it yes |
| 13:26.41 | buZz | cubieboard (even the a20 one) doesnt |
| 13:26.59 | buZz | i use li+ cells to power a raspi |
| 13:27.07 | buZz | 3 cells, give 3.7*3 volt |
| 13:27.13 | buZz | then a 5v 2A regulator |
| 13:27.16 | buZz | then the board |
| 13:27.49 | papito00 | could you give the links of your stuff?? |
| 13:28.00 | papito00 | battery and regulator |
| 13:28.02 | papito00 | please |
| 13:28.06 | buZz | the li+ cells i removed from broken laptop batteries |
| 13:28.13 | papito00 | oook |
| 13:28.15 | buZz | the regulator i ordered on a RC website |
| 13:28.31 | papito00 | i'll check |
| 13:28.47 | papito00 | thanks a lot, appreciate your info |
| 13:30.24 | deasy | buZz, can you show the regulator? thank |
| 13:31.01 | buZz | i lost the link actually |
| 13:31.06 | buZz | but i can show a similar product |
| 13:31.57 | buZz | http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=170929162891 |
| 13:53.22 | deasy | thank you(even if ebay prohibit me to see) |
| 13:53.41 | deasy | (fu ebay) |
| 13:54.31 | old-papa-work | You might be able to make a bucky power supply to output to 5 v.. I think it is called a bucky.. |
| 13:55.05 | old-papa-work | I look it up |
| 14:05.29 | old-papa-work | Ok, look up this IC LM3481MM |
| 14:07.36 | *** join/#cubieboard diffycat (~diffycat@85.113.55.206) |
| 14:07.45 | old-papa-work | I was wrong SEPIC is the word |
| 14:08.06 | buZz | deasy: post url in http://harkproxy.appspot.com/ |
| 14:08.07 | buZz | ;) |
| 14:08.15 | buZz | old-papa-work: buck and boost |
| 14:10.58 | old-papa-work | I have a lot of pcb's that have that circuit in it.. we are no longer going to use them.. pcb has the power supply that works from ~ 3.4 v to 24v dc and has outputs @ 5v, and 3.3 v. Has 1 BT module BT11MU, basic stamp with eeprom and 9 reed relays |
| 14:11.50 | old-papa-work | URL, with schematic.. hmmm, I need to find old papers |
| 14:12.58 | old-papa-work | I will have the machine shop cut a few boards for me so I can use the power circuit.. Will test it on my cubie/pcDuino/BBB |
| 14:14.31 | old-papa-work | We have like hundreds of 7.4v Li-Ion batteries too, Hi current.. 4.4 Ah.. |
| 14:19.22 | deasy | buZz, :o :o :o good boy! |
| 14:19.51 | buZz | ;) |
| 14:19.58 | buZz | hf using google's servers :D |
| 14:20.22 | buZz | old-papa-work: how many amp does the pcbs supply? |
| 14:20.37 | Bushmills | that's 4 18650 cells per pack |
| 14:20.53 | buZz | 7.4 is 2 18650 cells |
| 14:21.06 | Bushmills | but 4400 mAh isn't |
| 14:21.10 | buZz | yeah it can be |
| 14:21.20 | buZz | there are 4.4Ah li+ cells |
| 14:21.36 | buZz | doesnt have to be 18650 ;) he never said so |
| 14:21.49 | Bushmills | one 18650 is about 2000...2500 mAh. 3.7 V average |
| 14:22.06 | Bushmills | doesn't have to but very likely they are |
| 14:22.14 | old-papa-work | 1.5A what I recall |
| 14:22.55 | buZz | meh, not enough |
| 14:23.16 | buZz | i need something like .. 5A for a wearable |
| 14:23.26 | buZz | with crt display, 3g modem, harddrive |
| 14:23.40 | old-papa-work | looking up battery now.. |
| 14:25.35 | old-papa-work | they are Molicel ICR18650H Config in Series with protector board |
| 14:26.04 | old-papa-work | Config is 2S2P |
| 14:26.35 | old-papa-work | BuZz, you guessed it correct |
| 14:27.02 | buZz | Bushmills :P |
| 14:27.31 | old-papa-work | And Bushmills too.. sorry.. |
| 14:27.36 | *** join/#cubieboard delusr_ (~chatzilla@CPE-58-169-177-167.lns5.cha.bigpond.net.au) |
| 14:27.47 | buZz | :D |
| 14:27.54 | buZz | btw |
| 14:28.02 | buZz | cubie a20 doesnt have android on nand |
| 14:28.04 | buZz | but linaro |
| 14:28.05 | buZz | :P |
| 14:28.11 | buZz | (from the factory) |
| 14:28.27 | buZz | and SD from cubie a10 doesnt boot :( |
| 14:28.36 | buZz | guess i need to replace SPL |
| 14:29.40 | *** join/#cubieboard \\Mr_C\\ (mrc@adsl-98-89-6-48.mgm.bellsouth.net) |
| 14:31.21 | *** join/#cubieboard alexd (~alexd@port-92-205-110-191.dynamic.qsc.de) |
| 14:44.32 | deasy | if a h4xx0r in embedded device can help me or help people with a tutorial to build gentoo on sdcard for cubie... |
| 14:44.58 | *** join/#cubieboard rundfunk (~rundfunk@90-225-32-29-no99.bredband.skanova.com) |
| 14:49.24 | *** join/#cubieboard delusr_ (~chatzilla@CPE-58-169-177-167.lns5.cha.bigpond.net.au) |
| 14:50.34 | buZz | deasy: how much BTC is that worth to you? |
| 14:50.35 | buZz | :D |
| 14:52.34 | deasy | btc ouch i don't remember it's a money? :D |
| 14:53.26 | buZz | bitcoin |
| 14:53.44 | deasy | 0.000000000005 btc |
| 14:53.46 | buZz | anyway, just a stage3 rootfs for armv7 should do |
| 14:53.50 | buZz | thats too many numbers |
| 14:53.58 | buZz | only has 8 decimals ;) |
| 14:54.10 | deasy | don't need to put a uboot? |
| 14:54.17 | buZz | yes |
| 14:54.20 | buZz | SPL + uboot |
| 14:54.27 | buZz | grab one of the existing compiles |
| 14:54.28 | deasy | spl? |
| 14:54.34 | buZz | yes |
| 14:54.40 | buZz | read the wiki |
| 14:54.43 | buZz | :) |
| 14:54.48 | buZz | http://linux-sunxi.org/ |
| 14:55.15 | deasy | ok i can try, i risk nothing like it's on sdcard |
| 14:55.21 | buZz | yes |
| 14:55.25 | deasy | if don't success i come to you :p |
| 14:55.34 | buZz | allwinner a10 / a20 is practically unbrickable |
| 14:55.50 | deasy | and if i write on the uboot on the nand? :D |
| 14:56.24 | buZz | it will always try SD first |
| 14:56.34 | buZz | no matter how much you fuckup nand |
| 14:56.44 | deasy | wtf |
| 14:56.52 | deasy | where is this writed? |
| 14:57.09 | deasy | where is this fonctionnality |
| 14:57.11 | buZz | http://linux-sunxi.org/Boot |
| 14:57.28 | deasy | thank you buZz you are a cool guy! i don't take much of your time for now |
| 14:57.58 | buZz | there is a LOT of knowledge on that wiki! |
| 14:58.10 | buZz | you should be able to build a gentoo rootfs with it quickly |
| 14:59.12 | deasy | awesome, i use after a vanilla stable kernel for getting the better support possible with it |
| 14:59.39 | deasy | i have read than the support begin to be inside of vanilla |
| 15:01.33 | *** join/#cubieboard delusr_ (~chatzilla@CPE-58-169-177-167.lns5.cha.bigpond.net.au) |
| 15:15.51 | *** join/#cubieboard r4v5 (~r4v5@34.81-167-250.customer.lyse.net) |
| 15:17.21 | deasy | nice than the boot is inside :p |
| 15:18.37 | *** join/#cubieboard tinti (~tinti@pdpc/supporter/student/tinti) |
| 15:32.50 | *** join/#cubieboard deasy (~deasy@109.88.190.110) |
| 15:35.28 | r4v5 | !ls |
| 15:38.53 | *** join/#cubieboard uizex1 (~IceChat77@81.168.49.1) |
| 16:02.20 | *** join/#cubieboard prassel (~prassel@79.136.81.230) |
| 16:05.47 | *** join/#cubieboard Titankiller (~titankill@180.151.40.151) |
| 16:26.38 | *** join/#cubieboard smccarthy (~smccarthy@ip72-223-13-70.ph.ph.cox.net) |
| 16:33.09 | deasy | transfer 1MBTC on buZz account |
| 16:34.57 | *** join/#cubieboard emilepetrone (~emilepetr@c-76-105-221-23.hsd1.or.comcast.net) |
| 16:37.08 | *** join/#cubieboard emilepetrone (~emilepetr@c-76-105-221-23.hsd1.or.comcast.net) |
| 17:01.09 | *** join/#cubieboard rundfunk (~rundfunk@90-225-32-29-no99.bredband.skanova.com) |
| 17:22.28 | *** join/#cubieboard alexd (~alexd@port-92-205-110-191.dynamic.qsc.de) |
| 17:56.46 | *** join/#cubieboard infobot (~infobot@107.24.15.137) |
| 17:56.46 | *** topic/#cubieboard is BUY NOW! - http://cubieboard.org - http://linux-sunxi.org/Cubieboard - logs: http://irclog.whitequark.org/cubieboard http://ibot.rikers.org/%23cubieboard/ |
| 18:47.17 | *** join/#cubieboard infobot (~infobot@184.232.247.220) |
| 18:47.17 | *** topic/#cubieboard is BUY NOW! - http://cubieboard.org - http://linux-sunxi.org/Cubieboard - logs: http://irclog.whitequark.org/cubieboard http://ibot.rikers.org/%23cubieboard/ |
| 18:47.43 | r4v5 | man, if nothing else, BTC will make people become a lot more careful about the difference between Mega and milli |
| 21:56.54 | *** join/#cubieboard infobot (~infobot@174-27-225-67.slkc.qwest.net) |
| 21:56.54 | *** topic/#cubieboard is BUY NOW! - http://cubieboard.org - http://linux-sunxi.org/Cubieboard - logs: http://irclog.whitequark.org/cubieboard http://ibot.rikers.org/%23cubieboard/ |