| 00:13.51 | *** join/#cubieboard fuwei (~fuwei@linaro/fuwei) |
| 00:18.42 | *** join/#cubieboard ricardocrudo (~crudo@201.83.201.129) |
| 00:19.48 | *** join/#cubieboard ricardocrudo (~crudo@201.83.201.129) |
| 00:20.59 | *** join/#cubieboard ricardocrudo (~crudo@201.83.201.129) |
| 00:32.33 | *** join/#cubieboard stefanro1 (~stefan@pD958ACDD.dip0.t-ipconnect.de) |
| 00:35.50 | *** join/#cubieboard Compy (~compy@c-98-251-52-68.hsd1.ga.comcast.net) |
| 00:36.52 | Compy | I'm running debian wheezy on the cubieboard courtesy of this tutorial: http://linux-sunxi.org/Cubieboard/Installing_on_NAND and I cannot seem to get the sound chip to work. I'm trying to use the audio jack on the back, and each time I open alsamixer, I get "Unable to open mixer: No such file or directory", and lsmod doesn't yield any sound modules loaded. Any ideas? |
| 00:37.06 | Compy | Also, what chip does the cubieboard use for sound anyway? Its not in ANY of the specs. |
| 00:37.55 | *** join/#cubieboard vinifm (~vinicius@177.159.31.122) |
| 00:39.11 | GargantuaSauce | http://linux-sunxi.org/Audio_Codec |
| 00:39.29 | Compy | Thanks! |
| 00:39.31 | Compy | That helps a ton! |
| 00:39.58 | GargantuaSauce | have fun wrestling with alsa, it's always a good time |
| 00:40.19 | Compy | I recall similar woes when I did the same thing on raspi... :-/ |
| 00:41.11 | *** join/#cubieboard ricardocrudo (~crudo@201.83.201.129) |
| 00:42.18 | GargantuaSauce | at least this has an actual dac and not a stupid pwm output with a lpf |
| 00:42.38 | GargantuaSauce | so it'll sound not-terrible when you get it working :V |
| 00:44.59 | Compy | Ugh, I still get amixer: Control default open error: No such file or directory when I try to run any of the alsa util commands. |
| 01:10.09 | *** join/#cubieboard emilepetrone (~emilepetr@c-76-105-221-23.hsd1.or.comcast.net) |
| 01:25.10 | *** join/#cubieboard anunnaki (~christoph@c-174-54-115-236.hsd1.pa.comcast.net) |
| 01:30.04 | *** join/#cubieboard tinti (~tinti@pdpc/supporter/student/tinti) |
| 01:46.42 | *** join/#cubieboard qleelulu (~qleelulu@219.137.135.24) |
| 03:08.15 | *** join/#cubieboard [7] (~quassel@rockbox/developer/TheSeven) |
| 03:21.35 | *** join/#cubieboard discopig (~discopig@2001:c08:3700:ffff::40f) |
| 03:21.35 | *** join/#cubieboard discopig (~discopig@unaffiliated/discopig) |
| 03:32.52 | *** join/#cubieboard discopig (~discopig@unaffiliated/discopig) |
| 04:33.36 | *** join/#cubieboard jschneider (~jschneide@80.149.172.178) |
| 04:34.05 | jschneider | !ls |
| 05:39.21 | *** join/#cubieboard nils_2_ (~nils_2@unaffiliated/nils-2/x-2480262) |
| 06:02.34 | *** join/#cubieboard shineworld (~shineworl@151.62.202.156) |
| 06:04.09 | hno | does the bot work? |
| 06:04.12 | hno | !ls |
| 06:11.27 | *** join/#cubieboard gags (7370e769@gateway/web/freenode/ip.115.112.231.105) |
| 06:11.53 | gags | ls |
| 06:12.18 | *** part/#cubieboard gags (7370e769@gateway/web/freenode/ip.115.112.231.105) |
| 06:15.06 | *** join/#cubieboard ganbold (~ganbold@202.179.0.162) |
| 06:32.53 | *** join/#cubieboard theOzzieRat (~theRat@172.126.96.58.static.exetel.com.au) |
| 06:36.22 | *** join/#cubieboard n01 (~n01@93-57-16-194.ip162.fastwebnet.it) |
| 06:36.51 | *** join/#cubieboard F1skr (~F1skr@4205ds8-fb.0.fullrate.dk) |
| 06:41.09 | *** join/#cubieboard ninjak (~ninjak@77.239.137.142) |
| 07:02.30 | *** join/#cubieboard Martix (~martix@static-84-242-103-180.net.upcbroadband.cz) |
| 07:25.01 | *** join/#cubieboard \\Mr_C\\ (mrc@adsl-98-89-18-235.mgm.bellsouth.net) |
| 07:53.06 | *** join/#cubieboard dragonn (~dragonn@aarf56.neoplus.adsl.tpnet.pl) |
| 08:01.52 | *** join/#cubieboard mab_ (~mab@109.52.89.244) |
| 08:19.55 | *** join/#cubieboard \\Mr_C\\ (mrc@adsl-98-89-26-56.mgm.bellsouth.net) |
| 08:33.36 | *** join/#cubieboard anunnaki (~christoph@c-174-54-115-236.hsd1.pa.comcast.net) |
| 08:37.09 | *** join/#cubieboard focus (~Doug@host81-149-149-147.in-addr.btopenworld.com) |
| 08:39.39 | *** join/#cubieboard focus (~Doug@host81-149-149-147.in-addr.btopenworld.com) |
| 08:42.38 | *** join/#cubieboard user_2 (~user@86.33.168.109.dsl.static.ip.kpnqwest.it) |
| 08:52.22 | *** join/#cubieboard Ameen (6d7d9d0f@gateway/web/freenode/ip.109.125.157.15) |
| 09:00.57 | *** join/#cubieboard frop (~mrmr@unaffiliated/frop) |
| 09:49.17 | *** join/#cubieboard rellla (~rellla@p5B0792CA.dip0.t-ipconnect.de) |
| 10:02.00 | *** join/#cubieboard phantoxe (~destroy@a95-92-84-28.cpe.netcabo.pt) |
| 10:03.49 | *** join/#cubieboard Martix (~martix@eduroam-233.fi.muni.cz) |
| 10:14.26 | *** join/#cubieboard delusr_ (~chatzilla@101.162.201.171) |
| 10:18.38 | *** join/#cubieboard rz2k (~rz2k@128-69-81-21.broadband.corbina.ru) |
| 10:35.44 | *** join/#cubieboard mab_ (~mab@217.201.250.252) |
| 10:36.02 | *** join/#cubieboard err404 (~err404@mna75-11-88-161-199-178.fbx.proxad.net) |
| 10:50.37 | *** join/#cubieboard ricardocrudo (~crudo@201.83.201.129) |
| 11:00.05 | *** join/#cubieboard mab_ (~mab@217.201.250.252) |
| 11:05.08 | *** join/#cubieboard Yaku321 (~Yaku@pD95E1934.dip0.t-ipconnect.de) |
| 11:11.49 | BigWhoop[DE] | !ls |
| 11:12.25 | BigWhoop[DE] | @hno: works :D |
| 11:16.40 | *** join/#cubieboard Martix (~martix@eduroam-233.fi.muni.cz) |
| 11:23.47 | *** join/#cubieboard emilepetrone (~emilepetr@c-76-105-221-23.hsd1.or.comcast.net) |
| 11:28.41 | *** join/#cubieboard prassel (prassel@79.136.81.167) |
| 11:32.34 | user_2 | <PROTECTED> |
| 11:33.47 | *** join/#cubieboard tinti (~tinti@pdpc/supporter/student/tinti) |
| 11:34.07 | BigWhoop[DE] | imho via script.bin |
| 11:36.30 | user_2 | i see script.bin is a binary file, there is a way to "open a dn modyfy" it? |
| 11:37.10 | lunra | yes, bin2fex from sunxi-tools |
| 11:37.30 | lunra | https://github.com/linux-sunxi/sunxi-tools |
| 11:39.37 | *** join/#cubieboard Yaku321 (~Yaku@pD95E1934.dip0.t-ipconnect.de) |
| 11:52.27 | *** join/#cubieboard \\Mr_C\\ (mrc@adsl-98-89-33-128.mgm.bellsouth.net) |
| 12:07.36 | *** join/#cubieboard mab_ (~mab@95.74.149.46) |
| 12:12.46 | *** join/#cubieboard h0cin (~h0cin@unaffiliated/h0cin) |
| 12:14.54 | *** join/#cubieboard mab__ (~mab@95.74.161.142) |
| 12:22.14 | *** join/#cubieboard ricardocrudo (~crudo@187.121.47.64) |
| 12:32.29 | *** join/#cubieboard Cy-Gor (~Brian@cpe-70-124-70-140.austin.res.rr.com) |
| 12:35.03 | *** join/#cubieboard \\Mr_C\\ (mrc@adsl-98-89-33-128.mgm.bellsouth.net) |
| 12:51.05 | *** join/#cubieboard phantoxe (~destroy@a95-92-84-28.cpe.netcabo.pt) |
| 12:56.07 | *** join/#cubieboard Martix (~martix@static-84-242-103-180.net.upcbroadband.cz) |
| 13:00.01 | *** part/#cubieboard lunra (~ircme@205.185.116.160) |
| 13:09.51 | *** join/#cubieboard Yaku321 (~Yaku@pD95E1934.dip0.t-ipconnect.de) |
| 13:29.21 | *** join/#cubieboard fuwei1 (~fuwei@125.79.103.223) |
| 13:38.42 | *** join/#cubieboard Yaku-noob (~Yaku@pD95E0635.dip0.t-ipconnect.de) |
| 13:40.56 | *** join/#cubieboard mab_ (~mab@95.75.159.219) |
| 13:54.52 | *** join/#cubieboard delusr_ (~chatzilla@101.162.201.171) |
| 13:58.23 | *** join/#cubieboard Renat (~renat@217.170.93.158) |
| 14:00.08 | *** join/#cubieboard nils_2_ (~nils_2@unaffiliated/nils-2/x-2480262) |
| 14:02.15 | *** join/#cubieboard ganbold_ (~Ganbold@173.244.215.173) |
| 14:18.23 | *** join/#cubieboard diffycat (~diffycat@85.113.55.206) |
| 14:34.24 | *** join/#cubieboard Renat (~renat@217.170.93.158) |
| 14:34.28 | *** part/#cubieboard Renat (~renat@217.170.93.158) |
| 14:55.44 | *** join/#cubieboard emilepetrone (~emilepetr@c-76-105-221-23.hsd1.or.comcast.net) |
| 15:25.31 | *** join/#cubieboard rvalles (~rvalles@unaffiliated/rvalles) |
| 15:33.21 | *** join/#cubieboard tinti (~tinti@pdpc/supporter/student/tinti) |
| 15:40.30 | *** join/#cubieboard Male55 (Male55@adsl-66-143-32-165.dsl.kscymo.swbell.net) |
| 15:41.15 | hno | user_2, if the port is configured as an OTG port (which it most likely is) then it should work fine to plug a USB device there. you just need the right cable/adapter. |
| 15:42.38 | user_2 | hno, do you mean i can plug a (i.e.) keyboard directly an it will works without anykind of action at software lelel? ( of course usi a usb adapter) |
| 15:45.14 | hno | user_2, yes, that's the idea. |
| 15:45.37 | *** part/#cubieboard Male55 (Male55@adsl-66-143-32-165.dsl.kscymo.swbell.net) |
| 15:45.57 | user_2 | hno, it is you idea or you alreadi test it? |
| 15:46.03 | *** join/#cubieboard uizex1 (~IceChat77@host81-156-232-187.range81-156.btcentralplus.com) |
| 15:46.32 | user_2 | i mean, i can do the test directly with a cb as soon as i receive by FEDEX? |
| 15:50.42 | *** join/#cubieboard shineworld (~shineworl@151.62.219.14) |
| 15:50.59 | hno | user_2, I don't have an USB -> mUSB OTG cable/adapter for connecting periperials. |
| 15:51.18 | hno | but it's meant to work that way. |
| 15:51.50 | user_2 | hno, ok, i will try by myself as soon as i can, than i will report to you if i get success or not. |
| 16:12.05 | *** join/#cubieboard CoolePascal (~CoolePasc@capt501.xs4all.nl) |
| 16:12.17 | *** part/#cubieboard CoolePascal (~CoolePasc@capt501.xs4all.nl) |
| 16:13.56 | *** join/#cubieboard dragonn (~dragonn@aarf56.neoplus.adsl.tpnet.pl) |
| 16:17.40 | *** join/#cubieboard user (~user@86.33.168.109.dsl.static.ip.kpnqwest.it) |
| 16:22.27 | *** join/#cubieboard leowt (~leowt@195.244.54.77.rev.vodafone.pt) |
| 16:23.32 | *** join/#cubieboard leowt (~leowt@195.244.54.77.rev.vodafone.pt) |
| 16:48.26 | *** join/#cubieboard vinifm (~vini@177.19.132.23) |
| 17:55.54 | *** join/#cubieboard rmarko (~sorki@fedora/sorki) |
| 18:14.50 | *** join/#cubieboard suhanc (~sha@ip-62-245-106-90.net.upcbroadband.cz) |
| 18:15.52 | suhanc | re |
| 18:20.58 | *** join/#cubieboard delusr_ (~chatzilla@101.162.201.171) |
| 18:30.33 | *** join/#cubieboard qleelulu (~qleelulu@116.21.2.253) |
| 18:59.25 | *** join/#cubieboard Martix (~martix@static-84-242-103-180.net.upcbroadband.cz) |
| 19:05.57 | *** join/#cubieboard n01 (~n01@2-238-57-164.ip242.fastwebnet.it) |
| 19:09.21 | *** join/#cubieboard naquad (~naquad@naquad.me) |
| 19:09.23 | naquad | hi |
| 19:10.37 | naquad | i've purchased cubieboard and i would like to install there some linux (preferrably debian based, best choice - debian itself). but my problem is that tv is in repair shop and i don't have anything else able to show hdmi output. can i somehow do installation w/o video output? kind of specially prepared flash or something? |
| 19:11.03 | rm | naquad, http://linux-sunxi.org/Bootable_OS_images |
| 19:11.12 | rm | and I make http://romanrm.ru/en/a10/debian |
| 19:11.20 | naquad | will they have ssh running out of the box? |
| 19:11.47 | rm | mine does |
| 19:12.01 | naquad | perfect! thank you, went trying your image |
| 19:13.41 | \\Mr_C\\ | you can use a serial cable |
| 19:15.05 | naquad | \\Mr_C\\, in theory i even have it |
| 19:15.26 | naquad | i have it, but not sure how to do it through serial cable |
| 19:15.39 | \\Mr_C\\ | i have a script you can run on another computer that will generate an image or create a clean debian onto a sd card |
| 19:15.52 | \\Mr_C\\ | then you can boot it and use the serial cable or ssh to it after you boot |
| 19:16.24 | \\Mr_C\\ | i dont like premade image |
| 19:16.39 | \\Mr_C\\ | i like fresh clean versions that are update to the DAY |
| 19:17.06 | \\Mr_C\\ | https://github.com/EddyBeaupre/armStrap |
| 19:17.40 | naquad | nice |
| 19:18.55 | naquad | \\Mr_C\\, does it require some specific os? |
| 19:19.01 | \\Mr_C\\ | just linux |
| 19:19.11 | \\Mr_C\\ | it will get what it needs after you run it |
| 19:19.17 | naquad | cool |
| 19:19.29 | \\Mr_C\\ | edit the config.sh and then run the armstrap.sh |
| 19:19.38 | naquad | now all thats left is to figure out which wire goes were. wire has no marking (ground, receive, transfer, ...) :( |
| 19:19.59 | \\Mr_C\\ | oh |
| 19:20.03 | \\Mr_C\\ | what serial cable is it? |
| 19:20.06 | \\Mr_C\\ | model |
| 19:20.07 | naquad | usb -> serial |
| 19:20.13 | naquad | chineese no name |
| 19:20.18 | \\Mr_C\\ | photo? |
| 19:20.26 | \\Mr_C\\ | i got like 7 different ones |
| 19:20.28 | naquad | only from mobile |
| 19:20.36 | \\Mr_C\\ | just show me a photo |
| 19:22.41 | \\Mr_C\\ | is it a cable with 4 wires? |
| 19:23.02 | naquad | yes |
| 19:23.08 | naquad | uploading photo |
| 19:23.09 | naquad | sec |
| 19:23.28 | rm | > update to the DAY |
| 19:23.40 | rm | one apt-get update and apt-get dist-upgrade, and you're up-to-date |
| 19:23.45 | \\Mr_C\\ | sure |
| 19:24.16 | \\Mr_C\\ | so why hasnt there been a clean image done of the finaly wheezy 7.0? |
| 19:24.23 | \\Mr_C\\ | -y |
| 19:24.52 | \\Mr_C\\ | i did my own |
| 19:25.56 | rm | you mean why no update of my image? |
| 19:26.04 | \\Mr_C\\ | qemu-bootstrap is pretty cool |
| 19:28.25 | naquad | \\Mr_C\\, http://www.imagebam.com/image/b4823c256187577 |
| 19:28.44 | \\Mr_C\\ | naquad |
| 19:28.47 | \\Mr_C\\ | ok |
| 19:28.54 | \\Mr_C\\ | move the red away, dont use that |
| 19:29.19 | naquad | there are 4 pins and there's 4 wires here, but which one goes where? |
| 19:29.19 | \\Mr_C\\ | position your cubie with the ethernet to the left |
| 19:29.31 | \\Mr_C\\ | and hdmi to the right |
| 19:29.38 | \\Mr_C\\ | in the middle is the serial connection |
| 19:29.44 | \\Mr_C\\ | from closest to you |
| 19:29.45 | naquad | i see it |
| 19:29.51 | \\Mr_C\\ | do |
| 19:29.55 | \\Mr_C\\ | black |
| 19:29.59 | \\Mr_C\\ | skip |
| 19:30.03 | \\Mr_C\\ | green |
| 19:30.05 | \\Mr_C\\ | white |
| 19:30.13 | \\Mr_C\\ | so |
| 19:30.16 | \\Mr_C\\ | other way would be |
| 19:30.23 | \\Mr_C\\ | closest to the usb ports |
| 19:30.32 | \\Mr_C\\ | white, then green, skip, then black |
| 19:30.41 | \\Mr_C\\ | do not hook up the red |
| 19:30.42 | naquad | so black = gnd, green = rx, white = tx, red = not used. right? |
| 19:31.00 | \\Mr_C\\ | correct |
| 19:31.03 | naquad | thank you |
| 19:31.06 | naquad | trying to boot |
| 19:31.16 | \\Mr_C\\ | thats the pl-2303 cable |
| 19:36.27 | naquad | its alive1!! |
| 19:36.34 | naquad | thank you very much |
| 19:39.39 | \\Mr_C\\ | no problem |
| 19:49.11 | naquad | rm, how do i install your image onto onboard nand? |
| 19:51.15 | rm | it is intended to run from SD card |
| 19:51.38 | rm | maybe you can find a way to install to NAND, but I have not tried and don't have any instructions |
| 19:51.56 | \\Mr_C\\ | ive done it |
| 19:52.25 | \\Mr_C\\ | its faily simple |
| 19:52.29 | \\Mr_C\\ | fairly |
| 19:52.38 | \\Mr_C\\ | rm |
| 19:52.42 | \\Mr_C\\ | thats your web site? |
| 19:52.43 | naquad | that was a suspcicious typo >_> |
| 19:52.51 | mnemoc | patrick wood posted a nice script on the sunxi ML when get submited the changed for the repartitioning tool to notify the kernel to reread the table |
| 19:53.11 | mnemoc | magic uSD to NAND including repartitioning |
| 19:57.28 | rm | \\Mr_C\\, which website? http://romanrm.ru/en/a10/debian - yes |
| 19:57.35 | \\Mr_C\\ | cool |
| 19:57.47 | \\Mr_C\\ | i learned quite abit from there |
| 20:00.01 | \\Mr_C\\ | mnemoc |
| 20:00.11 | \\Mr_C\\ | you have that url for it? |
| 20:00.17 | mnemoc | no |
| 20:05.02 | naquad | could someone give me a hint on how to configure minicom? i see text, but i can't enter anything |
| 20:05.17 | mnemoc | finds microcom easier |
| 20:05.22 | mnemoc | and scroll friendly |
| 20:05.35 | \\Mr_C\\ | naquad |
| 20:06.20 | \\Mr_C\\ | you have to press some keyboard combo first then the letter i beleive |
| 20:06.48 | \\Mr_C\\ | sec |
| 20:06.52 | \\Mr_C\\ | i will test it |
| 20:07.02 | naquad | mnemoc, can't find it in packages of my distro |
| 20:07.29 | mnemoc | naquad: even `screen` is easier than minicom |
| 20:07.40 | naquad | mnemoc, i'm totally ok with screen |
| 20:07.43 | naquad | it is easy |
| 20:07.52 | mnemoc | the use screen for the serial too |
| 20:07.55 | mnemoc | then* |
| 20:08.35 | mnemoc | screen /dev/ttyUSB0 115200 |
| 20:08.44 | *** join/#cubieboard asterick (~asterick@c-50-152-212-40.hsd1.ca.comcast.net) |
| 20:09.23 | RaYmAn | mnemoc: only annoyance is that it messes with scrolling :P (though, i guess supposedly screen has it's own scroll stuff...) |
| 20:09.55 | mnemoc | ctrl-a [ |
| 20:10.01 | mnemoc | but sucks |
| 20:10.15 | naquad | RaYmAn, c-a esc |
| 20:10.29 | mnemoc | that's why I prefer microcom |
| 20:10.36 | mnemoc | the wheel works :p |
| 20:11.04 | RaYmAn | exactly |
| 20:11.09 | *** join/#cubieboard qleelulu (~qleelulu@116.21.2.253) |
| 20:12.49 | mnemoc | `nc` otoh has a totally sick command line for serial |
| 20:14.03 | *** join/#cubieboard mab_ (~mab@95.75.138.112) |
| 20:34.30 | *** join/#cubieboard lerc (~quassel@121.75.155.67) |
| 20:39.00 | naquad | i have a quiet odd thing here |
| 20:39.04 | naquad | device is up |
| 20:39.08 | naquad | ethernet is connected |
| 20:39.18 | naquad | i can connect via ssh |
| 20:39.27 | naquad | but after entering password nothing happens |
| 20:39.32 | \\Mr_C\\ | anyone have any experince with the baseboard? |
| 20:40.39 | *** join/#cubieboard simon__ (5bb18346@gateway/web/freenode/ip.91.177.131.70) |
| 20:40.51 | simon__ | !ls |
| 20:40.51 | naquad | rm, could you comment that? when i try to ssh device stops responding :\ |
| 20:40.52 | \\Mr_C\\ | i got the baseboard sitting here for 3 weeks, not sure what to do with it |
| 20:41.36 | mnemoc | connect a VGA and some 0.1" wire jumpers? |
| 20:42.26 | rm | naquad, how do you power it |
| 20:42.40 | rm | what kind of PSU and via which cable |
| 20:42.42 | naquad | rm, plug power cable, press the button |
| 20:42.47 | naquad | PSU? |
| 20:42.55 | rm | power supply unit? |
| 20:42.58 | naquad | cable is thernet cable i took from another computer |
| 20:43.03 | *** join/#cubieboard delusr__ (~chatzilla@101.162.201.171) |
| 20:43.08 | naquad | power supply unit is usual socket to usb |
| 20:43.19 | rm | and USB goes into where |
| 20:43.25 | rm | to some computer? |
| 20:43.55 | naquad | rm, usb goes to power adapter |
| 20:44.03 | rm | well dammit |
| 20:44.08 | rm | this is called a PSU |
| 20:44.16 | rm | so what kind of "power adapter" do you have |
| 20:44.27 | rm | how many mAh it is rated for |
| 20:44.43 | naquad | taken from samsung galaxy tab 8.9, but this thing has no data sheet :( |
| 20:44.46 | naquad | absolutely blank |
| 20:44.56 | naquad | you think i should buy normal adapter? |
| 20:45.00 | rm | also if you use the original barrel-to-usb cable that came with the CB, it is possible it can be bad: http://www.indiegogo.com/projects/cubieboard-open-arm-box?c=activity |
| 20:45.18 | rm | the "power adapter" should be at least 1000 mAh |
| 20:45.23 | rm | 500 mAh won't be enough |
| 20:45.37 | naquad | as i understand perfect case is 2000mAh |
| 20:45.39 | naquad | right? |
| 20:45.48 | mnemoc | 1A for the cubie 1A for the sata drive |
| 20:45.55 | rm | yes, 2000 should be ok |
| 20:46.04 | naquad | ok then |
| 20:46.10 | naquad | will go and buy it tomorrow |
| 20:46.13 | naquad | thanks for clue |
| 20:47.18 | rm | naquad, maybe you have chargers with a MiniUSB plug |
| 20:47.32 | rm | the CB can be powered via MiniUSB too |
| 20:48.17 | naquad | nope :( i don't have those |
| 20:48.35 | naquad | will have to wait until tomorrow to play with that stuff |
| 20:50.37 | rm | well |
| 20:50.45 | rm | try powering it from your computer's USB |
| 20:50.52 | rm | something to try rather than just waiting |
| 20:53.59 | simon__ | hello everyone, i can't get video output in android via hdmi/dvi adapter (no problem using berryboot etc). i'm playing with script.bin fex file but with no luck, is it even possible to run android (the last android tv from the official cubieboard website) on a 1280x1024 screen ? thanks |
| 21:02.04 | suhanc | bye |
| 21:11.13 | *** join/#cubieboard simon___ (5bb18346@gateway/web/freenode/ip.91.177.131.70) |
| 21:27.15 | *** join/#cubieboard oatley (~oatley@142.204.133.79) |
| 22:10.11 | naquad | rm, you were right. after unplugging all other devices, cubieboard works fine on pcs usb |
| 22:21.05 | *** join/#cubieboard brobama (81161517@gateway/web/freenode/ip.129.22.21.23) |
| 22:21.28 | brobama | !ls |
| 22:22.04 | brobama | !expl sdhc-cards |
| 22:22.05 | CubieFAQ | sdhc-cards: SDHC memory cards are supported by all A10-based devices. |
| 22:26.54 | brobama | anyone here? |
| 22:28.18 | brobama | whois brobama |
| 22:52.58 | *** join/#cubieboard delusr_ (~chatzilla@101.162.201.171) |
| 22:54.04 | *** join/#cubieboard err404 (~err404@mna75-11-88-161-199-178.fbx.proxad.net) |
| 22:54.45 | *** join/#cubieboard user (~user@86.33.168.109.dsl.static.ip.kpnqwest.it) |
| 23:57.39 | naquad | rm, where did ldconfig go? 0_0 |
| 23:57.47 | naquad | and start-stop-daemon |
| 23:58.04 | naquad | oh |
| 23:58.06 | naquad | all good |