| 00:13.40 | *** join/#cubieboard pcw_home (~chatzilla@ip-66-80-167-54.sjc.megapath.net) |
| 02:05.42 | *** join/#cubieboard onca (~osolus@unaffiliated/osolus) |
| 02:09.35 | *** join/#cubieboard emilepetrone (~emilepetr@c-24-22-29-165.hsd1.or.comcast.net) |
| 02:15.42 | *** join/#cubieboard Swat-____ (~Swat-@vps.frasa.net) |
| 02:15.45 | *** join/#cubieboard _ruzarzh_ (~ruzarzh@reverse-142.fdn.fr) |
| 02:16.17 | *** join/#cubieboard RedoXyde` (~redoxyde@LNeuilly-152-21-12-234.w193-253.abo.wanadoo.fr) |
| 02:16.35 | *** join/#cubieboard pcw_home_ (~chatzilla@ip-66-80-167-54.sjc.megapath.net) |
| 02:25.31 | *** join/#cubieboard robws1 (~robws1@38.99.170.111) |
| 02:43.15 | *** join/#cubieboard DropBear (~DropBear@rrcs-74-62-215-122.west.biz.rr.com) |
| 02:43.18 | *** join/#cubieboard niftylettuce (uid2733@gateway/web/irccloud.com/x-kpifxbngmkoosqeo) |
| 02:43.18 | *** join/#cubieboard pidpawel (pidpawel@gateway/shell/mydevil.net/x-sjnhausrhngbmeok) |
| 02:43.25 | *** join/#cubieboard ganbold_ (~ganbold@202.179.0.162) |
| 02:56.57 | *** join/#cubieboard f1r3 (fire@irc.insomniacs.at) |
| 03:16.38 | *** join/#cubieboard des2 (~nobody@pool-96-232-65-105.nycmny.east.verizon.net) |
| 03:27.23 | *** join/#cubieboard TheSeven (~quassel@rockbox/developer/TheSeven) |
| 03:50.48 | *** join/#cubieboard titankiller (~titankill@180.151.40.151) |
| 03:58.47 | *** join/#cubieboard onca (~osolus@unaffiliated/osolus) |
| 04:00.34 | *** join/#cubieboard antony1 (~Adium@2001:980:7456:101:40af:2008:81f7:7254) |
| 04:01.00 | *** join/#cubieboard FourthDr (~kvirc@c-71-198-184-247.hsd1.ca.comcast.net) |
| 04:49.17 | *** join/#cubieboard icCE (~icCE@mail.gllx.ru) |
| 05:05.33 | *** join/#cubieboard eebrah (~ibrah@212.49.88.108) |
| 05:45.57 | *** join/#cubieboard Renat (~renat@217.170.93.158) |
| 05:50.02 | *** join/#cubieboard rz2k (~rz2k@128-68-242-200.broadband.corbina.ru) |
| 05:51.06 | *** part/#cubieboard Renat (~renat@217.170.93.158) |
| 06:23.16 | *** join/#cubieboard uro (~uro@c83-248-162-102.bredband.comhem.se) |
| 06:39.10 | *** join/#cubieboard KiSM (~KiSM@CPE-121-215-147-234.lnse1.wel.bigpond.net.au) |
| 07:18.45 | *** join/#cubieboard newbie|2 (~kvirc@c-71-198-184-247.hsd1.ca.comcast.net) |
| 07:50.40 | *** join/#cubieboard n01 (~carlo@2-238-57-164.ip242.fastwebnet.it) |
| 07:59.41 | *** join/#cubieboard fzerorubigd (~f0rud@unaffiliated/fzerorubigd) |
| 08:04.01 | *** join/#cubieboard rellla (~rellla@p4FE56328.dip0.t-ipconnect.de) |
| 08:16.41 | *** join/#cubieboard shineworld (~shineworl@151.62.218.132) |
| 08:41.50 | *** join/#cubieboard razorx (~razorx@213-64-167-30-no64.bredband.skanova.com) |
| 08:41.54 | razorx | Hi |
| 08:42.31 | razorx | any linux guru arround? |
| 08:46.41 | rm | no |
| 08:47.58 | *** join/#cubieboard uro (~uro@c83-248-162-102.bredband.comhem.se) |
| 08:48.49 | icCE | rm :) |
| 08:49.42 | razorx | :p |
| 08:49.57 | razorx | icCE, u know anything about keymaping? |
| 08:51.32 | icCE | razorx where ? |
| 08:52.15 | razorx | linux generaly |
| 08:53.19 | razorx | im trying to integrate my cubieboard with my car |
| 08:53.35 | shineworld | cool |
| 08:53.51 | razorx | ive done it before with a winxp machine |
| 08:54.06 | shineworld | what display do you use ? |
| 08:54.18 | razorx | shineworld, the stock 16:9 |
| 08:54.54 | shineworld | oh ok, with linux or android ? |
| 08:55.04 | razorx | linux |
| 08:55.14 | razorx | but android is an option |
| 08:55.57 | shineworld | I found more simple to do graphics with android, or I'm already used with it.... |
| 08:56.15 | razorx | i want to be able to navigate in xbmc with my carĀ“s buttons |
| 08:56.28 | razorx | i got a program that translates keypresses to hex |
| 08:56.43 | razorx | just wondering if its possible to bind that |
| 08:59.01 | shineworld | I don't know actually at this point... I'm yet in troubles with some display configuration |
| 08:59.23 | shineworld | next step will be to get some input to remove softkeys |
| 09:00.19 | *** join/#cubieboard slackwareer (~slackware@219.82.148.198) |
| 09:00.25 | shineworld | however the great add on to use android is that developed app will run also in phone or tabled |
| 09:00.42 | shineworld | *tablet and develop and debug is very simple with android infrastructure |
| 09:01.13 | slackwareer | Hello I've got a wifi device RealTek RTL8188CU,and I compile the driver from http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=48&PFid=48&Level=5&Conn=4&DownTypeID=3&GetDown=false&Downloads=true#RTL8188CUS |
| 09:01.25 | slackwareer | But I got a problem in compiling |
| 09:03.07 | rm | don't |
| 09:03.45 | rm | you have 2 drivers already in the sunxi kernel for this device |
| 09:03.53 | rm | rtl8192cu and 8192cu |
| 09:04.00 | rm | both generally work |
| 09:04.24 | rm | why do you need a 3rd driver, directly from realtek? |
| 09:04.25 | slackwareer | Can it set to ap mode? |
| 09:04.30 | rm | 8192cu can |
| 09:04.33 | slackwareer | with this module? |
| 09:04.42 | rm | yes http://jas-hacks.blogspot.com/2012/09/hackberry-wireless-access-point.html |
| 09:04.50 | rm | but you need a modified hostapd |
| 09:06.01 | slackwareer | OOOOH I was mislead by "The problem can be overcome by compiling the hostpad supplied with the driver from the RealTek site (version 3.4.4_4749)." |
| 09:06.16 | slackwareer | my fault.. |
| 09:09.14 | *** join/#cubieboard c4nn1b4l (~cannibal@91.83.199.163.pool.invitel.hu) |
| 09:14.51 | rm | the website also provides a compiled hostapd |
| 09:14.54 | rm | but it did not work for me |
| 09:14.59 | rm | due to GLIBC linking error |
| 09:15.07 | rm | if you want I can upload mine that I compiled |
| 09:17.11 | rm | http://romanrm.ru/dl/a10/hostapd-arm-realtek.tar.gz |
| 09:19.59 | slackwareer | Thank you rm, It do me a great favor |
| 09:21.46 | slackwareer | But I want to know where is your code from.. |
| 09:22.01 | slackwareer | I want to compile it myself~~ |
| 09:22.22 | rm | sec |
| 09:24.11 | rm | I changed the URL a bit http://romanrm.ru/dl/a10/hostapd/ |
| 09:24.15 | *** join/#cubieboard hipboi (~hipboi@119.132.96.24) |
| 09:24.27 | rm | there's the Realtek archive with the source code for various things |
| 09:24.47 | rm | and hostapd compiled from it |
| 09:25.34 | slackwareer | RTL8192xC_USB_linux_v3.4.4_4749.20121105.zip? |
| 09:26.16 | rm | in RTL8192xC_USB_linux_v3.4.4_4749.20121105.zip/RTL8188C_8192C_USB_linux_v3.4.4_4749.20121105/wpa_supplicant_hostapd/wpa_supplicant_hostapd-0.8_rtw_20120803.zip <- this is the hostapd source |
| 09:26.24 | slackwareer | ok |
| 09:26.34 | slackwareer | I'll try it |
| 09:26.38 | slackwareer | Thanks |
| 09:27.06 | slackwareer | It is being compiled now |
| 09:27.08 | slackwareer | ahha |
| 09:27.23 | slackwareer | Finished |
| 09:27.28 | slackwareer | I'll test it later |
| 09:58.44 | BigWhoop[DE] | cubieboard has a stock 16:9 display? :) rm did you post your hostapd to the wiki? |
| 10:43.09 | slackwareer | Hello rm RU still here? |
| 10:43.49 | slackwareer | Can 8192cu driver support the 11n? |
| 10:48.05 | icCE | slackwareer [ 3.442943] usb 1-1.3: Product: 802.11n WLAN Adapter |
| 10:49.34 | *** join/#cubieboard RedoXyde (~redoxyde@LNeuilly-152-21-12-234.w193-253.abo.wanadoo.fr) |
| 10:50.38 | rm | slackwareer, I don't know |
| 10:50.51 | rm | slackwareer, this says AP mode is only up to 54mbit -> http://jas-hacks.blogspot.com/2012/09/hackberry-wireless-access-point.html |
| 10:52.22 | rm | and 8 clients only |
| 10:52.23 | icCE | rm master mode work ? |
| 10:52.27 | rm | yes |
| 10:52.30 | icCE | ok |
| 10:52.35 | rm | so in the end I decided not to use Mele as an AP |
| 10:52.41 | rm | used an extra TL-WR703N I had |
| 10:52.51 | rm | http://embeddedtimes.blogspot.com/2011/09/tp-link-tl-wr703n-tiny-linux-capable.html |
| 10:52.56 | rm | http://www.aliexpress.com/item/Free-Shipping-Portable-Mini-TP-LINK-TL-WR703N-150M-Wireless-3G-Router-WR703N-Wholesale/515352969.html |
| 10:53.04 | icCE | a bad idea to use as a AP |
| 10:53.29 | icCE | rm TP-LINK TL-WR703N GOOD |
| 10:53.58 | rm | icCE, my aunt uses Mele A2000 as a desktop computer :) and now they have a 2nd PC |
| 10:54.16 | rm | so my question was whether to set up A2000 as an AP there... or not |
| 10:54.19 | rm | decided not to |
| 10:55.28 | rm | and it's kind of simpler to set up firewalling/routing/internet connection on the TL-WR703N, with OpenWRT |
| 10:55.41 | rm | than doing everything manually with scripts in debian |
| 10:56.11 | icCE | rm I'm trying to install ubuntu in nand , cubieboard |
| 10:57.10 | icCE | but not enough time |
| 10:58.35 | slackwareer | icCE is it your device ?802.11n WLAN Adapter |
| 10:58.45 | slackwareer | how is the speed? |
| 10:59.05 | icCE | slackwareer i used 802.11g |
| 10:59.31 | slackwareer | Have you ever test it on 11n? |
| 10:59.57 | slackwareer | it's a pity not to support the 11n while on windows it support.. |
| 11:04.32 | icCE | slackwareer read documentation |
| 11:04.50 | icCE | Quick_Start_Guide_for_SoftAP.pdf |
| 11:06.08 | icCE | SoftAP_Mode_features |
| 11:06.51 | rm | slackwareer, I think it works in 11n, but not in the AP mode |
| 11:09.27 | slackwareer | All right,got it |
| 11:11.07 | slackwareer | SoftAP_Mode_features.pdf? |
| 11:14.36 | *** join/#cubieboard Martix (~martix@4.177.broadband3.iol.cz) |
| 11:38.09 | *** join/#cubieboard eebrah_ (~yaaic@212.49.88.108) |
| 12:01.16 | *** join/#cubieboard h0cin (~h0cin@unaffiliated/h0cin) |
| 12:07.23 | *** join/#cubieboard ricardocrudo (~crudo@187.121.47.64) |
| 12:20.39 | *** join/#cubieboard imRance (~rance@116.54.74.3) |
| 12:29.12 | *** join/#cubieboard alcides (~alcides@unaffiliated/alcides) |
| 12:30.58 | *** join/#cubieboard Cy-Gor (~Brian@cpe-70-124-70-140.austin.res.rr.com) |
| 12:37.05 | *** join/#cubieboard fzerorubigd (~f0rud@unaffiliated/fzerorubigd) |
| 12:42.26 | *** join/#cubieboard imRance1 (~rance@112.115.182.169) |
| 12:43.46 | *** join/#cubieboard dongs (~dongs@l212168.ppp.asahi-net.or.jp) |
| 12:44.23 | *** join/#cubieboard ganbold__ (~Ganbold@202.179.0.162) |
| 12:51.59 | *** join/#cubieboard dongs (~dongs@l212168.ppp.asahi-net.or.jp) |
| 12:53.01 | *** join/#cubieboard Animal-X (~Animal-X@noc.smartbrasil.com.br) |
| 13:01.55 | *** join/#cubieboard rundfunk (~rundfunk@c-c38fe555.02-16-6c6b7013.cust.bredbandsbolaget.se) |
| 13:06.30 | *** join/#cubieboard rundfunk (~rundfunk@c-c38fe555.02-16-6c6b7013.cust.bredbandsbolaget.se) |
| 13:09.45 | *** join/#cubieboard fzerorubigd (~f0rud@unaffiliated/fzerorubigd) |
| 13:19.27 | *** join/#cubieboard tinti (~tinti@pdpc/supporter/student/tinti) |
| 13:41.42 | *** join/#cubieboard wooy (~wooy@unaffiliated/wooy) |
| 13:57.58 | *** join/#cubieboard diffycat (~diffycat@85.113.55.206) |
| 14:07.46 | *** join/#cubieboard emilepetrone (~emilepetr@c-24-22-29-165.hsd1.or.comcast.net) |
| 14:08.02 | *** join/#cubieboard emilepetrone (~emilepetr@c-24-22-29-165.hsd1.or.comcast.net) |
| 14:26.15 | *** join/#cubieboard CoolePascal (~CoolePasc@capt501.xs4all.nl) |
| 14:42.02 | *** join/#cubieboard xymox (lechuck@unaffiliated/contempt) |
| 14:44.58 | *** join/#cubieboard alcides (~alcides@189.27.70.215.dynamic.adsl.gvt.net.br) |
| 14:44.58 | *** join/#cubieboard alcides (~alcides@unaffiliated/alcides) |
| 15:00.41 | *** join/#cubieboard GeorgeH (~George@207.200.175.161) |
| 15:03.46 | *** join/#cubieboard rz2k (~rz2k@128-68-242-200.broadband.corbina.ru) |
| 15:16.10 | *** join/#cubieboard Animal-X (~Animal-X@noc.smartbrasil.com.br) |
| 15:17.02 | wooy | !ls |
| 15:18.03 | wooy | !ls sata-harddrive |
| 15:18.22 | wooy | !expl sata-harddrive |
| 15:18.23 | CubieFAQ | sata-harddrive: The onboard 5V SATA power connector is only capable to power 2.5-inch hard disk drives. For 3.5-inch HDD usage you need a power supply that supplies 5V + 12V, and power the cubieboard from 5V and HDD from 5v + 12v. The option of powering both separately from the same power supply is always possible. |
| 15:19.00 | wooy | !expl sata-max-limit |
| 15:19.01 | CubieFAQ | sata-max-limit: Storage limit is per SATA 2.0 specifications, 48 bit LBA addressing or 128 PiB. |
| 15:19.13 | wooy | !expl ssd-drive |
| 15:19.16 | CubieFAQ | ssd-drive: It's possible to connect a SSD drive on Cubieboard |
| 15:19.45 | CoolePascal | can you boot from usb stick ? |
| 15:26.04 | wooy | CoolePascal: probably. i am still waiting for my cubie to arrive. |
| 15:26.39 | wooy | !expl monitor |
| 15:26.42 | CubieFAQ | monitor: You really need an HDMI monitor capable of either 1280x720 (720p) or 1920x1080 (1080p) for use with the pre-installed image. Newer kernels should support and monitor with valid EDID. |
| 15:26.46 | wooy | !expl usb-power |
| 15:26.47 | CubieFAQ | usb-power: You can connect the USB cable to the OTG microUSB port on the Cubieboard. Generally, you can get the power from the USB port of your computer (at 500mA, according to the USB specifications), or use a USB power supply like those available for mobile phones. If you use a generic USB power supply, it should indicate how many Amps (A) it can provide. |
| 15:28.01 | wooy | !expl start-it |
| 15:28.04 | CubieFAQ | start-it: CNXSoft has written a great Quick Start Guide here (http://www.cnx-software.com/2012/12/09/cubieboard-unboxing-and-quick-start-guide/). There is a First Steps page on this Wiki (http://linux-sunxi.org/Cubieboard/FirstSteps). |
| 15:28.31 | wooy | !expl credits |
| 15:28.32 | CubieFAQ | credits: see http://linux-sunxi.org/Cubieboard/FAQ |
| 15:29.01 | CoolePascal | wooy lang wating mine i got from our hackersspace |
| 15:30.19 | wooy | I have ordered from shopify and got tracking number after 4 days or so. But it got cancelled ;( |
| 15:30.34 | CoolePascal | damm |
| 15:30.42 | CoolePascal | they sold out everywhere |
| 15:30.46 | CoolePascal | i'd like to have a base |
| 15:30.53 | wooy | it looked so promising |
| 15:31.00 | CoolePascal | sold out even before anouncement |
| 15:33.05 | *** join/#cubieboard emilepetrone (~emilepetr@c-24-22-29-165.hsd1.or.comcast.net) |
| 15:33.48 | *** join/#cubieboard Martix (~martix@4.177.broadband3.iol.cz) |
| 15:34.23 | wooy | dont you know if HDMI -> DVI conversion would work with cubie? |
| 15:36.29 | Martix | it works, tested |
| 15:43.54 | wooy | Martix: wonderful. |
| 15:45.00 | wooy | shit, im so excited. you know, like x-mas. cant wait |
| 15:45.22 | *** join/#cubieboard bfree (~niall@109.255.245.157) |
| 15:49.24 | *** join/#cubieboard rundfunk (~rundfunk@c-c38fe555.02-16-6c6b7013.cust.bredbandsbolaget.se) |
| 16:08.11 | *** join/#cubieboard eebrah (~ibrah@212.49.88.108) |
| 16:29.09 | *** join/#cubieboard federico3 (~federico@2002:45a4:d90a::1) |
| 16:29.37 | *** join/#cubieboard lawrence (~lawrence@114.86.242.207) |
| 16:31.08 | *** join/#cubieboard RedoXyde (~redoxyde@LNeuilly-152-21-12-234.w193-253.abo.wanadoo.fr) |
| 16:35.19 | *** join/#cubieboard wooy (~wooy@unaffiliated/wooy) |
| 16:42.39 | *** join/#cubieboard titankiller (~titankill@180.151.40.151) |
| 17:00.09 | *** join/#cubieboard wooy (~wooy@unaffiliated/wooy) |
| 17:01.26 | *** join/#cubieboard wooy (~wooy@unaffiliated/wooy) |
| 17:09.27 | *** join/#cubieboard rellla (~rellla@p4FE56328.dip0.t-ipconnect.de) |
| 17:16.55 | *** join/#cubieboard asterick (~asterick@1awesm.static.monkeybrains.net) |
| 17:19.17 | *** join/#cubieboard wooy (~wooy@unaffiliated/wooy) |
| 17:31.17 | *** join/#cubieboard ychavan (~ychavan@219.91.251.108) |
| 17:31.40 | ychavan | !ls |
| 17:32.39 | ychavan | !ls faq |
| 17:34.41 | ychavan | !explpm faq |
| 17:35.55 | wooy | !expl faq |
| 17:35.57 | CubieFAQ | faq: see http://linux-sunxi.org/Cubieboard/FAQ |
| 17:36.08 | ychavan | Hi |
| 17:36.30 | ychavan | How to access 'recovery mode' in cubieboard? |
| 17:37.16 | ychavan | Can we install CWM like other A10 devices and take nand backup and all sorts of things? |
| 17:38.48 | mnemoc | yes |
| 17:38.55 | mnemoc | CWM for A10 obviusly |
| 17:40.57 | ychavan | I installed cwm_recovery_6.0.1.2_a10 on nandg and it booted with grey screen. |
| 17:41.22 | ychavan | Any link to follow? |
| 17:47.34 | *** join/#cubieboard gzamboni (~gzamboni@103.191.15.109.rev.sfr.net) |
| 17:55.29 | ychavan | Anybody has working cwm on your cubieboard? |
| 17:58.46 | *** join/#cubieboard RedoXyde (~redoxyde@lneuilly-152-21-12-234.w193-253.abo.wanadoo.fr) |
| 18:04.53 | mnemoc | afaik you have to echo 'recovery' to the nand partition called misc |
| 18:05.09 | *** join/#cubieboard shineworld (~shineworl@151.62.215.16) |
| 18:06.38 | *** join/#cubieboard wooy (~wooy@unaffiliated/wooy) |
| 18:07.07 | ychavan | Did this |
| 18:07.08 | ychavan | echo -n boot-recovery | busybox dd of=/dev/block/nandf count=1 conv=sync; sync; reboot |
| 18:08.22 | ychavan | printenv shows bootcmd=run setargs boot_recovery |
| 18:09.58 | ychavan | I did same on 2 different A10 tablets. It worked on them. Somehow, it is not working for cubieboard. |
| 18:15.20 | *** join/#cubieboard zdang (~zinching@vs2.dang.it.cx) |
| 18:16.41 | zdang | hi, I'm new to cubieboard and I have some questions. |
| 18:17.34 | zdang | does anyone know what arm core the vubieboard has? the official website says a8, some other sources and pictures say a10 |
| 18:17.47 | *** join/#cubieboard weltall (~weltall@planeshift/developer/weltall) |
| 18:18.42 | bfree | zdang: the Allwinner A10 cpu on the cubieboard is a Cortex-A8 (yes the naming is stupidly confusing) |
| 18:20.50 | zdang | bfree: ok, thanks |
| 18:22.12 | BigWhoop[DE] | wooy you have to use new kernel versions. HDMI => DVI would not work from stock with most DVI SCreens. |
| 18:22.29 | zdang | and what about the sata connector and ethernet? is it supported by the soc, or is it provided via usb? |
| 18:22.58 | bfree | zdang: soc |
| 18:23.42 | ychavan | It seems like there is newer version of cwm for A10 devices on http://forum.xda-developers.com/showthread.php?t=2189640 |
| 18:24.04 | zdang | bfree: ok, thanks again |
| 18:28.25 | wooy | BigWhoop[DE]: good to know. thx! |
| 18:36.51 | *** join/#cubieboard ychavan (~ychavan@219.91.251.108) |
| 18:40.56 | *** join/#cubieboard shineworld (~shineworl@151.62.215.16) |
| 18:41.28 | *** join/#cubieboard eebrah (~ibrah@212.49.88.99) |
| 18:42.49 | *** join/#cubieboard RedoXyde (~redoxyde@lneuilly-152-21-12-234.w193-253.abo.wanadoo.fr) |
| 18:47.25 | *** join/#cubieboard lerc (~quassel@121-74-239-169.telstraclear.net) |
| 18:48.29 | ychavan | Rebooting in cwm6028-a10-10part-v2 shows screen divided into 4 with pinkish background and everything messed up. |
| 18:49.25 | pcw_home | Hey that's better than all grey! |
| 18:49.50 | ychavan | Also, getting kernel messages |
| 18:49.51 | ychavan | [DISP WRN] file:drivers/video/sun4i/disp/de_bsp/de/disp_scaler.c,line:49: not supported scaler input pixel format:5 in Scaler_sw_para_to_reg |
| 18:49.51 | ychavan | [DISP WRN] file:drivers/video/sun4i/disp/de_bsp/de/disp_scaler.c,line:158: not supported type:0 in Scaler_sw_para_to_reg |
| 18:50.26 | ychavan | usb mouse is not working. I have not tried keyboard. |
| 19:00.49 | *** join/#cubieboard wooy (~wooy@unaffiliated/wooy) |
| 19:03.54 | ychavan | There is no information on web either. I conclude that 'cwm does not work on cubieboard'. |
| 19:04.50 | mnemoc | it does work. on the ML you'll find people using it, ask there |
| 19:17.01 | ychavan | mnemoc, searching cwm or clockworkmod on ML is giving me 0 results. Can you confirm? |
| 19:20.28 | mnemoc | I don't do android. but I've know Turl is happily using CWM |
| 19:22.38 | Turl | ychavan: toggle the scaler on the fex |
| 19:23.09 | *** join/#cubieboard GeorgeH (~George@207.200.175.242) |
| 19:24.04 | ychavan | Turl, how can I do that? |
| 19:25.00 | Turl | bin2fex/fex2bin from sunxi tools |
| 19:25.16 | Turl | the flag name is fb#_scaler_used iirc |
| 19:25.33 | ychavan | ok |
| 19:25.50 | Turl | http://linux-sunxi.org/Script.bin |
| 19:30.15 | *** join/#cubieboard ohama (ohama@cicolina.org) |
| 19:31.36 | *** join/#cubieboard xymox (lechuck@unaffiliated/contempt) |
| 19:34.30 | BigWhoop[DE] | ychavan when you have it done please upload it or write an tutorial about it. |
| 19:34.52 | ychavan | BigWhoop[DE], sure. |
| 19:35.18 | ychavan | Which is the best place to upload tutorial? |
| 19:35.20 | xenoxaos | BigWhoop[DE], what's the DE for |
| 19:35.21 | xenoxaos | ? |
| 19:36.09 | BigWhoop[DE] | i changed it for other to know the language :) few are not common with english |
| 19:36.22 | BigWhoop[DE] | ychavan in english please use the cubieboard wiki. |
| 19:36.51 | xenoxaos | sehr gut, i live in DE (delaware, US) |
| 19:37.25 | *** join/#cubieboard onca (~osolus@unaffiliated/osolus) |
| 19:37.27 | BigWhoop[DE] | other language then english via PN please. |
| 19:41.29 | *** part/#cubieboard CoolePascal (~CoolePasc@capt501.xs4all.nl) |
| 19:45.11 | *** join/#cubieboard oatley (~oatley@142.204.133.79) |
| 19:54.44 | *** join/#cubieboard rellla (~rellla@p4FE56328.dip0.t-ipconnect.de) |
| 19:56.05 | *** join/#cubieboard c4nn1bal (~cannibal@91-83-145-215.pool.invitel.hu) |
| 20:08.40 | *** join/#cubieboard ychavan (~ychavan@219.91.251.108) |
| 20:12.13 | *** join/#cubieboard err404 (~err404@mna75-11-88-161-199-178.fbx.proxad.net) |
| 20:23.21 | ychavan | Turl, It did not help. I set 'fb0_scaler_mode_enable = 1 |
| 20:23.21 | ychavan | fb1_scaler_mode_enable = 1' for cubieboard.fex and replaced script.bin on nanda. I got the same display as earlier. |
| 20:24.49 | Turl | it should be =0 iirc |
| 20:28.54 | shineworld | what is the way to define the right display width and height so FBIOGET_VSCREENINFO return a right value (like during surfaceflinger start) ? |
| 20:30.21 | *** join/#cubieboard FourthDr (~kvirc@c-71-198-184-247.hsd1.ca.comcast.net) |
| 20:33.41 | ssvb | ychavan: are you trying to use 16bpp color depth with "fb0_scaler_mode_enable=1"? |
| 20:34.39 | ssvb | scaler mode only supports a limited set of color formats (just 32bpp and some yuv stuff) |
| 20:36.54 | ychavan | ssvb, I changed both fb options. I will try again with only fb1_scaler set to 1. |
| 20:43.45 | *** join/#cubieboard Cybercrime (~And@cpc34-camd13-2-0-cust545.20-2.cable.virginmedia.com) |
| 20:45.14 | *** join/#cubieboard des2 (~nobody@pool-96-232-65-105.nycmny.east.verizon.net) |
| 20:51.14 | ychavan | ssvb, my final aim is to get correct display of clockworkmod recovery which is looking weird now. |
| 21:59.08 | *** part/#cubieboard fzerorubigd (~f0rud@unaffiliated/fzerorubigd) |
| 22:41.06 | *** join/#cubieboard asterick (~asterick@1awesm.static.monkeybrains.net) |
| 23:09.02 | *** join/#cubieboard tinti (~tinti@pdpc/supporter/student/tinti) |
| 23:10.18 | *** join/#cubieboard tinti (~tinti@pdpc/supporter/student/tinti) |
| 23:14.02 | *** join/#cubieboard theOzzieRat (~theRat@172.126.96.58.static.exetel.com.au) |
| 23:14.22 | *** join/#cubieboard jammi- (o@sorsacode.com) |
| 23:15.34 | *** join/#cubieboard rvalles_ (~rvalles@89.128.239.114) |
| 23:15.57 | *** join/#cubieboard rundfunk_ (~rundfunk@c-c38fe555.02-16-6c6b7013.cust.bredbandsbolaget.se) |
| 23:17.32 | *** join/#cubieboard ausxxh_ (~xxiao@li41-126.members.linode.com) |
| 23:18.08 | *** join/#cubieboard weltall2 (~weltall@planeshift/developer/weltall) |
| 23:18.32 | *** join/#cubieboard oatley_ (~oatley@142.204.133.79) |
| 23:23.50 | *** join/#cubieboard err404 (~err404@mna75-11-88-161-199-178.fbx.proxad.net) |
| 23:28.49 | *** join/#cubieboard cbuser (ada4ee22@gateway/web/freenode/ip.173.164.238.34) |
| 23:28.55 | cbuser | hello |
| 23:29.32 | cbuser | who was the designer of the cubie board ? Is it this person: https://plus.google.com/117677652709931793641 |
| 23:32.06 | *** join/#cubieboard weltall (~weltall@planeshift/developer/weltall) |