| 00:00.04 | TD-Linux | yeah |
| 00:00.21 | TD-Linux | it also dosen't have enough fans if you want to go crazy with way too many videocards and/or processors |
| 00:01.14 | TD-Linux | our 3.4ghz Pentium 4 hits the limit every so often in the Sonata |
| 00:01.49 | JeffM2501 | well those run hot |
| 00:01.53 | JeffM2501 | my system dosn't run hot |
| 00:01.57 | RPG_ | AMD? |
| 00:01.57 | JeffM2501 | it just has lots of stuff |
| 00:01.59 | JeffM2501 | yeah |
| 00:02.05 | TD-Linux | the case seems to always be the component you can never find one you like |
| 00:02.06 | RPG_ | my AMD doens't get near the lmit |
| 00:02.08 | JeffM2501 | my CPU never gets over 40 at load |
| 00:02.18 | RPG_ | same |
| 00:02.19 | TD-Linux | BZFlag = 73C |
| 00:02.24 | RPG_ | wow |
| 00:02.26 | JeffM2501 | the power supply is what I must get right |
| 00:02.30 | TD-Linux | need to eat |
| 00:02.32 | JeffM2501 | dude that's like chicken roasting time |
| 00:02.46 | TD-Linux | I thought of a toaster heatsink |
| 00:03.35 | RPG_ | or an AMD :) |
| 00:03.38 | JeffM2501 | I may just build my own case |
| 00:03.42 | RPG_ | lol |
| 00:03.45 | RPG_ | i was thinking of doing that |
| 00:03.47 | RPG_ | out of wood |
| 00:03.51 | JeffM2501 | why? |
| 00:03.56 | JeffM2501 | bad thermal properties |
| 00:04.05 | RPG_ | i just thought it would look "homemade" |
| 00:04.11 | JeffM2501 | well that it would |
| 00:04.13 | RPG_ | then i saw one i liked at the store, and boutht that |
| 00:04.17 | JeffM2501 | I want a special one |
| 00:04.25 | JeffM2501 | that has the power supply on the bottom |
| 00:04.37 | JeffM2501 | and the opticals coming out the side |
| 00:04.41 | RPG_ | although a friend of mine had a crazy idea of putting non-conductive water in a fishtank, and running his CPU / mobo / GFX card in the fishtank |
| 00:04.52 | JeffM2501 | RPG_, that's old |
| 00:04.55 | RPG_ | and hang it from the ceiling |
| 00:05.00 | RPG_ | has it been done publically? |
| 00:05.02 | JeffM2501 | use vegi oil |
| 00:05.05 | JeffM2501 | ohh yeah many times |
| 00:05.07 | RPG_ | oh |
| 00:05.16 | BearPerson | even distilled water will be problematic |
| 00:05.16 | JeffM2501 | water usualy dosn't work |
| 00:05.18 | BearPerson | oil is better |
| 00:05.19 | JeffM2501 | yeah |
| 00:05.28 | JeffM2501 | you can never get water "pure" |
| 00:05.33 | *** join/#bzflag Snow_Shelter (n=SnowSh@ppp-216-106-101-23.storm.ca) |
| 00:05.33 | JeffM2501 | cus your gonna put a a PC in it |
| 00:05.48 | BearPerson | though reportedly you still have to seal the CPU base off from the oil too |
| 00:05.57 | JeffM2501 | probably a good idea |
| 00:05.58 | BearPerson | the pins 'n stuff |
| 00:06.06 | JeffM2501 | couple people have done it |
| 00:06.17 | JeffM2501 | there are cheap water cooling systems these days |
| 00:06.20 | JeffM2501 | so it's not realy viable |
| 00:06.31 | BearPerson | since the oil changes the capacitive properties of the pins a little, which has effects @ some gigahertz |
| 00:07.04 | RPG_ | well i should tell him that it's possible :) |
| 00:07.06 | brlcad | yay for TimRiker fixing ibot |
| 00:08.09 | RPG_ | s/foo/bar |
| 00:08.29 | RPG_ | seems like they already are |
| 00:08.37 | brlcad | no, you just typod ;) |
| 00:08.45 | brlcad | s/typod/typo'd/ |
| 00:09.02 | RPG_ | hah |
| 00:09.03 | brlcad | it's like an echo |
| 00:09.09 | brlcad | it's like an echo |
| 00:09.15 | brlcad | which yes.. is annoying :) |
| 00:09.28 | JeffM2501 | cus ya know, people can't read |
| 00:09.41 | BearPerson | s/tries/tires of this/ |
| 00:09.56 | BearPerson | yay |
| 00:11.35 | brlcad | the first time, it's "oh, that's cute" .. second time it's "hrm" .. by the third time it's "grr" |
| 00:16.42 | Tupone | OO still not fixed :( |
| 00:24.26 | TimRiker | ibot: chanset #bzflag sed 0 |
| 00:24.27 | ibot | Setting sed for #bzflag to '0'. |
| 00:24.35 | TimRiker | s/this/won't do anything/ |
| 00:25.19 | TD-Linux | this is interesting: a server with one superflag |
| 00:25.19 | TimRiker | brlcad: I think I'll make it a ~s/ so you get it if you want it and not otherwise. |
| 00:26.19 | TimRiker | brlcad: happy now? no more grr? |
| 00:27.37 | TD-Linux | thank you |
| 00:27.46 | TD-Linux | hey... no 'you're welcome' :) |
| 00:28.23 | TD-Linux | that's the most irritating one I can think of |
| 00:28.34 | TD-Linux | TimRiker: how does nickometer work? |
| 00:29.05 | TimRiker | TD-Linux: it's just silly. it looks at characters and distribution and stuph. see the source if you're interested. |
| 00:30.10 | TD-Linux | hmmm... ok |
| 00:30.25 | TimRiker | http://cvs.sourceforge.net/viewcvs.py/blootbot/blootbot/src/Modules/nickometer.pl?view=markup |
| 00:31.50 | TimRiker | ~nickometer pronwarez |
| 00:31.54 | brlcad | TimRiker: hehe, i'd be happy .. no grr .. it went from grr to ugh, so no grr anyways ;) |
| 00:32.23 | TimRiker | brlcad: sed is off here. I don't yet have a ~s/ feature. |
| 00:32.24 | brlcad | don't do it on my account though if everyone else loves it :) |
| 00:32.37 | TimRiker | heh. I had enough of it too. |
| 00:33.31 | brlcad | oh, now if I could message ibot in private the s/// and have it repsond in whatever channel had the message.. |
| 00:33.35 | brlcad | that'd be cool ;) |
| 00:34.11 | TD-Linux | ~nickometer X |
| 00:34.17 | TD-Linux | hmm |
| 00:35.36 | menotume | s/huh/what |
| 00:35.41 | menotume | s/huh/what/ |
| 00:41.16 | *** join/#bzflag TimRiker (n=timr@pdpc/supporter/bronze/TimRiker) |
| 00:41.16 | *** mode/#bzflag [+o TimRiker] by ChanServ |
| 00:42.47 | TimRiker | brlcad: hmm. I could probably do that... it knows what channel it was said in... hmm. |
| 00:53.09 | *** join/#bzflag DTRemenak (n=DTRemena@DHCP-170-143.caltech.edu) |
| 00:53.09 | *** mode/#bzflag [+v DTRemenak] by ChanServ |
| 00:56.36 | brlcad | yeah, then it wouldn't necessarily be an echo .. it'd just seem like ibot was actually somewhat intelligent even ;) |
| 00:58.39 | *** join/#bzflag uso (n=uso@84-72-15-175.dclient.hispeed.ch) |
| 00:59.43 | SportChick | USO! |
| 01:01.02 | *** join/#bzflag CBG (n=CBG@cpc2-stme1-5-1-cust130.cdif.cable.ntl.com) |
| 01:01.31 | uso | hi SC :) |
| 01:02.04 | CBG | Does anyone have an AIM/MSN/etc address for "Mr_Molez"...? |
| 01:05.10 | menotume | you want to send him a thank-you note ? |
| 01:05.26 | CBG | Not exactly... |
| 01:05.49 | CBG | Just would like to speak to him, I guess. |
| 01:06.18 | menotume | i don't have one (fortunatly) |
| 01:06.41 | CBG | I have no reason to be upset with him, he did nothing against me personally, but I would like to ask him why he felt he had to annoy everyone else (all such great people who never would hurt a fly)... |
| 01:06.54 | menotume | it would be useless |
| 01:07.06 | CBG | Perhaps... But I'de like to try. |
| 01:07.36 | CBG | s/I'de/I'd |
| 01:08.52 | brlcad | CBG: it's really best to leave it alone |
| 01:09.22 | CBG | brlcad: hmm... maybe... |
| 01:09.27 | brlcad | asking him why isn't going to get you anything useful |
| 01:09.35 | CBG | Nobody seems to have his IM details anyway, if he has any... |
| 01:09.48 | CBG | It would satisfy my curiosity. |
| 01:09.49 | brlcad | at best, it will let him know that you care that he caused trouble, and potentially be more motivation |
| 01:10.11 | CBG | He used to be a good friend, I'd just like to speak to him. |
| 01:10.23 | brlcad | your curiosity could just as likely cause him to hop on and continue causing trouble, more likely actually |
| 01:10.37 | CBG | Has he stopped? |
| 01:11.35 | *** join/#bzflag lan56 (i=lan56@user-vcausbj.dsl.mindspring.com) |
| 01:12.57 | *** join/#bzflag PuMpErNiCkLe (n=Moitd@CPE000d8802a749-CM0012c9a9a6dc.cpe.net.cable.rogers.com) |
| 01:21.13 | TD-Linux | what's the name of the 2.0 branch? |
| 01:21.20 | TimRiker | ~bzcvs |
| 01:21.25 | ibot | cvs -d :pserver:anonymous@cvs.bzflag.org:/cvsroot/bzflag co -P -r v2_0branch bzflag |
| 01:21.30 | TD-Linux | oh, duh :) |
| 01:21.50 | TD-Linux | I found you can get the list of branches through cvs :) |
| 01:23.01 | TD-Linux | I'll see if my luck fares well with vc8 and 2.0 |
| 01:31.46 | CIA-3 | opencombat: 03jeffm2501 * 10GPx01/client/src/mainMenu.cpp: don't need what we don't use |
| 01:32.34 | CIA-3 | opencombat: 03jeffm2501 * 10GPx01/client/ (inc/menus.h src/menus.cpp): turn the background drawing back on |
| 01:33.42 | TD-Linux | awww... 2_0branch dosen't have VC8 |
| 01:33.50 | TD-Linux | dosen't matter for me anyway :) |
| 01:33.58 | JeffM2501 | it's head only |
| 01:46.46 | *** join/#bzflag Legoguy (n=Legoguy@ppp-68-20-3-114.dsl.emhril.ameritech.net) |
| 01:52.10 | *** join/#bzflag benplaut (n=benplaut@cpe-70-95-146-177.hawaii.res.rr.com) |
| 02:30.18 | *** join/#bzflag BenUrban (n=benurban@68.49.10.243) |
| 02:51.07 | *** join/#bzflag DTRemenak (n=DTRemena@DHCP-170-143.caltech.edu) |
| 02:51.07 | *** mode/#bzflag [+v DTRemenak] by ChanServ |
| 02:55.40 | *** join/#bzflag PuMpErNiCkLe (n=Moitd@CPE000d8802a749-CM0012c9a9a6dc.cpe.net.cable.rogers.com) |
| 03:15.12 | brlcad | http://www.random-good-stuff.com/random_good_stuff/2005/10/guess_whom_i_sa.html |
| 03:21.58 | blast007 | lol |
| 03:23.13 | *** join/#bzflag PKMOBILE (n=Apathy@pcp010175pcs.dover01.de.comcast.net) |
| 03:27.49 | lan56 | SilverFox-work, ping |
| 03:33.11 | Thumper_ | Masterban entries keep getting clobbered. Code that touches the ban list does a acl.load() first |
| 03:33.26 | Thumper_ | supposedly to reread any updated info from the disk ban file |
| 03:33.44 | Thumper_ | but part of this is calling clear() to erase all bans (including master bans) |
| 03:33.47 | Thumper_ | which don't get restored |
| 03:34.04 | Thumper_ | If we remove the acl.load() calls... will that break anything? |
| 03:34.14 | Thumper_ | for ban/unban/poll ban etc |
| 03:37.36 | Thumper_ | for multiple servers sharing the same banlist... some other procedure will have to do a /reload and /masterban reload on each server |
| 03:37.43 | blast007 | I think the load was added to enable a shared ban list, without having to /reload the other servers using that file |
| 03:37.44 | Thumper_ | if the banlist changes - otherwise bans will get lost |
| 03:37.58 | Thumper_ | but it effectively hoses up the masterban list |
| 03:38.01 | Thumper_ | the way it is now |
| 03:38.36 | Thumper_ | the other option is make the ban load() function check the existing entries before clearing it to see if master ban entries exist |
| 03:38.41 | Thumper_ | and then reload the master ban list at the end |
| 03:38.42 | blast007 | are masterbans marked as such? |
| 03:38.47 | Thumper_ | yes |
| 03:39.30 | blast007 | we could make clear() ignore them |
| 03:39.43 | Thumper_ | ok |
| 03:39.44 | blast007 | but I'm not familiar enough to know what adverse effects that could cause |
| 03:40.45 | Thumper_ | the shared banlist (the way it is now) won't update any new bans until someone touches the banlist on the server |
| 03:40.59 | Thumper_ | so if you ban player X on server A then server B with the shared ban list |
| 03:41.14 | Thumper_ | won't have that ban until someone reloads manually or changes the banlist in some way |
| 03:41.40 | Thumper_ | which isn't particularly effective |
| 03:42.12 | Thumper_ | forcing a banlist reload on each server when the banlist changes will keep player X off the servers |
| 03:43.14 | Thumper_ | I'm just questioning whether the way it works now is really good enough to keep |
| 03:51.37 | blast007 | yeah, there are some flaws in the way it works |
| 03:51.51 | blast007 | plus there's 3 ban lists ;) |
| 03:51.57 | Thumper_ | yup :/ |
| 03:54.11 | Thumper_ | Changing clear() so it selectively removes non-masterbans and then merging is probably the better 'quick fix' at this point |
| 03:55.59 | *** join/#bzflag Pimpi (n=frank@p5481BEEE.dip0.t-ipconnect.de) |
| 04:18.25 | CIA-3 | BZFlag: 03lan56 * 10bzflag/ (7 files in 3 dirs): add /modcount [+-seconds] which adds/removes # of seconds from in game. it works with manual countdowns too, whether started or not. thanks to silvercat and orange for the idea. |
| 04:20.26 | lan56 | I am unsure of who thought of that idea (I was just told of it and offered an opportunity to do it if I wanted to) or what name to put on the credit part of the line in NEWS, so tell me about any names to add to the credits in NEWS |
| 04:27.15 | *** join/#bzflag PuMpErNiCkLe (n=Moitd@CPE000d8802a749-CM0012c9a9a6dc.cpe.net.cable.rogers.com) |
| 04:27.45 | *** join/#bzflag orchid (n=bzgirl@unaffiliated/orchid) |
| 04:27.45 | *** mode/#bzflag [+v orchid] by ChanServ |
| 04:39.08 | *** join/#bzflag BeerPerson (i=karsten@sourcemage/wizard/pdpc.sustaining.BearPerson) |
| 04:40.57 | *** join/#bzflag PuMpErNiCkLe (n=Moitd@CPE000d8802a749-CM0012c9a9a6dc.cpe.net.cable.rogers.com) |
| 05:07.53 | *** join/#bzflag spldart (n=spldart@cpe-67-10-221-4.houston.res.rr.com) |
| 05:28.58 | learner | the passive flushes to clear bans (for the purpose of reloading from file) that occur when one bans shouldn't (yet currently do) clear out bans in the other two ban lists, only an active command-induced clearing of the ban lists should clear all three (e.g. /reload which should pull from master if it can, otherwise shouldn't clear master too) |
| 05:32.57 | spldart | Anybody have a windows compile of bzadmin for 2.1.x they would be willing to share with me? |
| 05:33.16 | lan56 | I have one |
| 05:33.36 | lan56 | curses or basic? |
| 05:33.42 | spldart | I need one.. I have 2.0.x... as does anyone but I need one to talk to 0034 |
| 05:33.48 | spldart | doesn't matter much.. |
| 05:34.01 | lan56 | alright I will give you the basic one |
| 05:34.03 | lan56 | hold on |
| 05:34.09 | spldart | thank you very much |
| 05:34.26 | lan56 | where should I transport it to you? bzbb pm? email? |
| 05:35.06 | spldart | prolly bzbb pm |
| 05:35.38 | lan56 | k |
| 05:35.43 | lan56 | let me send it |
| 05:35.49 | spldart | :~) |
| 05:36.51 | blast007 | I can do a curses one eventually :) |
| 05:37.00 | blast007 | need to get Visual Studio reinstalled |
| 05:37.02 | lan56 | you have libcurl.dll, spldart ? |
| 05:37.48 | spldart | not sure now that you ask |
| 05:38.07 | spldart | is that something I can go after online? |
| 05:38.17 | lan56 | usually, but luckily I can ship it |
| 05:38.29 | blast007 | you should have it with your 2.0.x stuff |
| 05:38.39 | blast007 | it's included with the installers |
| 05:38.45 | lan56 | indeed blast007 is right |
| 05:38.45 | spldart | I got it |
| 05:38.45 | blast007 | and needed to run every binary |
| 05:38.56 | spldart | windows system |
| 05:38.57 | lan56 | lets hope its 7.15.0 version |
| 05:39.29 | spldart | if I have a problem I guess I know what to look for :) |
| 05:39.57 | lan56 | well yeah there will be some smoke from the back of the computer |
| 05:40.01 | lan56 | sent |
| 05:40.03 | spldart | It's version 7.13.0 |
| 05:40.07 | lan56 | ouch |
| 05:40.21 | lan56 | I guess it could work |
| 05:40.24 | spldart | time for new one |
| 05:40.35 | lan56 | do you need a copy of 7.15.0? |
| 05:41.10 | spldart | if you wouldn't mind sending one I'd appreciate it... don't know if I need it yet |
| 05:41.22 | lan56 | well I'll get it ready anyway |
| 05:41.33 | lan56 | I sent bzadmin already so try it out |
| 05:43.23 | spldart | Sweet!!!! I'm logged into 2.0 and 2.1 on windows now! |
| 05:43.27 | spldart | Thanks :) |
| 05:43.38 | lan56 | all in the line of duty |
| 05:43.42 | spldart | hehe |
| 05:55.43 | *** join/#bzflag ibot (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) |
| 05:55.43 | *** topic/#bzflag is http://BZFlag.org/ || http://my.BZFlag.org/bb/ || http://my.BZFlag.org/ || http://cia.navi.cx/stats/project/BZFlag || http://BZFlag.org/wiki/GettingHelp || http://BZFlag.org/wiki/Download || #bzchat for casual chat || paste to http://bzflag.pastebin.ca || CVS HEAD is now 2.1 unstable, commit stable to v2_0branch |
| 05:55.43 | *** mode/#bzflag [+o ibot] by ChanServ |
| 05:55.46 | *** join/#bzflag rj-away (n=booto@rawmode.org) |
| 05:55.51 | *** join/#bzflag st4lker (n=st4lker@neverland.in-ulm.de) |
| 05:56.19 | *** join/#bzflag cods (n=cods@tuxee.net) |
| 05:57.54 | *** join/#bzflag Guu (i=guu@myth.gibbscam.com) |
| 06:00.05 | *** join/#bzflag zerovertex (n=zerovert@68-190-18-162.dhcp.mtgm.al.charter.com) |
| 06:00.16 | *** join/#bzflag tsowell (i=tom@71.197.44.161) [NETSPLIT VICTIM] |
| 06:00.20 | *** join/#bzflag meacan (n=dennis@koderen.dk) |
| 06:00.20 | *** join/#bzflag orange_away (n=mdw@pdpc/supporter/basic/orange) |
| 06:00.20 | *** mode/#bzflag [+v orange_away] by ChanServ |
| 06:00.48 | *** join/#bzflag Cosmol (n=dave@66-169-152-99.dhcp.ftwo.tx.charter.com) |
| 06:20.39 | *** join/#bzflag wizatmac (i=wiz@pool-71-161-33-36.clppva.east.verizon.net) |
| 06:34.18 | *** join/#bzflag cynyr (n=cynyr@207.75.39.241) |
| 06:35.20 | cynyr | anyone here using xorg7+composite and seeing artifacts? |
| 06:35.49 | cynyr | like the whole right side of the sceen just showing the ground? |
| 06:55.54 | *** join/#bzflag fiberchunks (n=fiberchu@69.182.213.157) |
| 06:59.44 | fiberchunks | purple_cow you around? |
| 07:00.21 | *** join/#bzflag orchid (n=bzgirl@unaffiliated/orchid) |
| 07:00.22 | *** mode/#bzflag [+v orchid] by ChanServ |
| 07:11.55 | *** part/#bzflag fiberchunks (n=fiberchu@69.182.213.157) |
| 07:31.23 | *** join/#bzflag fiberchunks (n=fiberchu@69.182.213.157) |
| 07:40.14 | fiberchunks | ping? |
| 07:40.22 | PuMpErNiCkLe | pong! |
| 07:40.28 | spldart | hehe |
| 07:40.32 | fiberchunks | thanks, wondering if this worked :) |
| 07:40.47 | spldart | just been quiet |
| 07:42.22 | fiberchunks | here's a question for you all: I've been wondering if I could run 2 different vid cards (say a 7800 and a quadro 4400) on an SLI mobo (not in SLI mode, of course), for this purpose: 7800 for games on 2 monitors, and quadro for cad/cam on 2 monitors -- anyone know of someone or some site that's done this? |
| 07:43.35 | fiberchunks | more to the point, I'd like to be able to devote each card to a group of monitors (e.g. run bz on the 7800 and it's 2 monitors, and run say solidworks on the quadro on its 2 monitors -- simultaneously :) ) |
| 07:45.50 | fiberchunks | this looks nice ;) http://digitaltigers.com/zenview-powerscapehd.shtml |
| 07:47.46 | spldart | Way outta my league... Wouldn't you need special software or perhaps a special kernel to allow such a config? |
| 07:48.48 | fiberchunks | good question -- I've never really gone into it -- I've googled on running separate cards but there's not a lot out there I can find. |
| 07:49.15 | fiberchunks | I have no idea if such a setup would even work on linux -- right now I'm interested in windows (but linux will indeed be on it eventually) |
| 07:49.41 | fiberchunks | my father wants to build a killer rig (and he's got all sorts of money to spend -- which is nice) |
| 07:50.59 | spldart | I'm only aware of that one company making special gaming rigs with dual adapters... matched producing 1 half the screen each to get a 50% increase over a single card of the same gpu performance. But that's not near what you want... :( |
| 07:51.50 | fiberchunks | not necessarily what I want, but what is a wonderful, wonderful dream :) |
| 07:52.15 | *** join/#bzflag apb91781 (n=47388a5e@webchat.bzflag.bz) |
| 07:52.40 | apb91781 | an anybody help me with a resolution problem? |
| 07:52.52 | apb91781 | can* |
| 07:52.53 | fiberchunks | I was thinking of the ASUS A8N32-SLI deluxe |
| 07:54.03 | spldart | What was the problem? |
| 07:54.30 | apb91781 | I changed my res from 1024x768 16bit to 32 bit and the refresh rate went to hell |
| 07:54.57 | apb91781 | I tried ot uninstall and reinstall, no change. Tried to uninstall and reinstall to a diffrent folder and still nothing. |
| 07:55.16 | spldart | So your saying you added an ish load more colors and your framerate went down alot? |
| 07:55.20 | apb91781 | currently going through my registry to delete all keys relating to BZFlag to see if that fixes it. |
| 07:55.47 | apb91781 | no My refresh rate... 70Hrz went elsewhere when I added more color |
| 07:56.55 | apb91781 | ahh crap. |
| 07:56.56 | apb91781 | sec |
| 07:57.02 | spldart | C:\Documents and Settings\user\My Documents\My BZFlag Files\2.0\.config.cfg to make bz run in a specific mode if you want |
| 07:57.17 | apb91781 | ahh |
| 07:58.09 | spldart | set resolution "1024x768 @60Hz 32 bits" or whatava |
| 07:58.13 | apb91781 | or just delete the config file and let bzflag write a new one in its place |
| 07:58.28 | spldart | then you have that figured |
| 07:59.01 | spldart | Did this problem start with BZ being installed? |
| 08:00.58 | apb91781 | nope, I was messing with the display stuff and accidentally set it to 100Hrz. |
| 08:01.04 | apb91781 | my monitor maxes at 60 |
| 08:01.12 | apb91781 | thanks though, got it fixed. |
| 08:02.23 | spldart | sorry I wasn't more help.. glad you got it fixed |
| 08:05.07 | spldart | reboot |
| 08:07.53 | *** join/#bzflag DTRemenak (n=DTRemena@DHCP-170-143.caltech.edu) |
| 08:07.53 | *** mode/#bzflag [+v DTRemenak] by ChanServ |
| 08:08.58 | apb91781 | ok, one more question |
| 08:09.01 | apb91781 | bots |
| 08:09.18 | apb91781 | how to add them through the command line, its still -solo 10 or somethin? |
| 08:09.24 | lan56 | yes |
| 08:19.20 | *** part/#bzflag fiberchunks (n=fiberchu@69.182.213.157) |
| 08:33.10 | *** join/#bzflag _Manu_ (n=_jujibo@98.Red-80-36-59.staticIP.rima-tde.net) |
| 08:33.10 | *** mode/#bzflag [+v _Manu_] by ChanServ |
| 08:33.51 | *** join/#bzflag TimRiker (n=timr@pdpc/supporter/bronze/TimRiker) |
| 08:33.51 | *** mode/#bzflag [+o TimRiker] by ChanServ |
| 09:00.32 | *** join/#bzflag ToughShooter (n=ts@p54B01E18.dip0.t-ipconnect.de) |
| 09:06.09 | *** join/#bzflag apb91781 (n=47388a5e@webchat.bzflag.bz) |
| 10:01.35 | *** join/#bzflag Blue_Eyes (n=Blue@host109-148.pool8256.interbusiness.it) |
| 10:02.47 | BearPerson | hmm... did any of you here catch a /whois on Mr Molez while he was on under some other nick? |
| 10:11.32 | Pimpi | BearPerson: for what? |
| 10:12.08 | BearPerson | I'm wondering if his "realname" field stayed constant |
| 10:39.41 | Deepa | Tim! you got yourself a bet! |
| 10:51.25 | *** join/#bzflag mmu_man (i=revol@ALyon-253-1-46-185.w83-205.abo.wanadoo.fr) |
| 10:54.14 | *** join/#bzflag brad2901 (i=brad@unaffiliated/brad2901) |
| 12:05.37 | *** part/#bzflag ToughShooter (n=ts@p54B01E18.dip0.t-ipconnect.de) |
| 12:14.57 | *** join/#bzflag quantumdot (n=Juan@VA1-1A-u-0588.mc.onolab.com) |
| 12:16.21 | *** part/#bzflag quantumdot (n=Juan@VA1-1A-u-0588.mc.onolab.com) |
| 12:27.28 | *** join/#bzflag brad2901 (i=brad@unaffiliated/brad2901) |
| 12:31.31 | *** join/#bzflag Tupone (n=Tupone@pdpc/supporter/active/Tupone) |
| 12:31.31 | *** mode/#bzflag [+v Tupone] by ChanServ |
| 13:30.56 | *** join/#bzflag suss (n=su@83-221-81-136.cable2.primacom.net) |
| 13:33.09 | suss | argh i need to be invited for the bzleague |
| 13:34.32 | suss | ojee |
| 13:35.19 | *** join/#bzflag suss (n=su@83-221-81-136.cable2.primacom.net) |
| 13:35.30 | *** join/#bzflag sussi (n=su@83-221-81-136.cable2.primacom.net) |
| 13:39.50 | *** join/#bzflag |zongo| (n=zongo@dhcp24-214.math.uni-bielefeld.de) |
| 13:52.13 | *** join/#bzflag suss (n=su@83-221-81-136.cable2.primacom.net) |
| 13:56.22 | *** join/#bzflag Birdie (n=Birdie__@d54C34DE9.access.telenet.be) |
| 14:38.22 | *** join/#bzflag ToughShooter (n=ts@p54B01E9F.dip0.t-ipconnect.de) |
| 15:43.08 | CIA-3 | BZFlag: 03atupone * 10bzflag/ (8 files in 3 dirs): Jitter kick from Thomas Stauer sf patches |
| 15:51.40 | *** join/#bzflag RPG_ (n=G-bus@c-24-15-87-171.hsd1.il.comcast.net) |
| 15:53.49 | *** join/#bzflag CBG (n=Matthew@cpc2-stme1-5-1-cust130.cdif.cable.ntl.com) |
| 15:54.30 | *** join/#bzflag kierra (n=c72cbe0b@genesis.concept69.de) |
| 16:01.43 | Tupone | ToughShooter: do you mind testing those, asa anonymous synchronize ? |
| 16:02.23 | ToughShooter | Tupone: I'll look whether it is in anon CVS now |
| 16:02.33 | *** part/#bzflag kierra (n=c72cbe0b@genesis.concept69.de) |
| 16:06.51 | CBG | I need help. It seems my config.cfg has no affect over my client, and possibly vice-versa. |
| 16:07.09 | RPG_ | I need mental hep |
| 16:07.12 | Tupone | 2.0/config.cfg |
| 16:07.42 | CBG | I deleted the conf, ran bzflag, no nnew conf was created... |
| 16:08.30 | Tupone | you are running it as a different user ? |
| 16:09.14 | CBG | I dont understand... |
| 16:09.17 | ToughShooter | Tupone: Could need a while, conflicts found during merging :/ |
| 16:09.36 | Tupone | ok |
| 16:09.40 | RPG_ | CBG: directory have read/write privlages? |
| 16:09.45 | Tupone | CBG: what OS ? |
| 16:09.50 | CBG | 10.3.9 |
| 16:09.55 | CBG | RPG_: why wouldnt it? |
| 16:10.51 | Tupone | CBG are you hitting the menu Save Setting ? |
| 16:11.47 | CBG | I *have* to? |
| 16:12.24 | CBG | even if I do, no new conf. |
| 16:12.38 | CBG | not in /Library/app support/bzflag/2.0/ |
| 16:13.51 | ToughShooter | Do a /localset and look whether the file gets created then |
| 16:14.24 | CBG | ...? |
| 16:14.43 | RPG_ | type "/localset list my.bzflag.org/db" |
| 16:14.57 | RPG_ | localset does stuff with the config file |
| 16:15.06 | ToughShooter | /localset is a command to write config changes into the config file without having to switch out of BZFlag |
| 16:16.16 | *** join/#bzflag SportChick (n=SportChi@ca-redbch-cuda1-c3b-a-40.stmnca.adelphia.net) |
| 16:16.16 | *** mode/#bzflag [+v SportChick] by ChanServ |
| 16:16.38 | CBG | ndo it, in bzflag? |
| 16:16.40 | CBG | *do |
| 16:16.51 | RPG_ | yeah |
| 16:18.29 | CBG | ok, will do. |
| 16:19.14 | sniperyyd | CBG: or reinstall bzflag ;) |
| 16:20.16 | CBG | bah |
| 16:21.31 | sniperyyd | ;) |
| 16:28.58 | *** join/#bzflag CBG_ (n=Matthew@cpc2-stme1-5-1-cust130.cdif.cable.ntl.com) |
| 16:35.06 | CBG_ | I have removed my BZFlag Config. I run BZFlag, Hit "Save Settings" then Quit. |
| 16:35.15 | CBG_ | But, there is no new conf created. |
| 16:35.25 | CBG_ | Any ideas..? |
| 16:37.57 | CBG_ | *sigh* |
| 16:38.41 | menotume | looking in the right place? right user? perms to write the file ? |
| 16:38.46 | blast007 | maybe run from a terminal with -d -d -d -d |
| 16:39.07 | menotume | change something, reload bzflag, see if it's there |
| 16:39.33 | CBG_ | Only one user, admin account... |
| 16:39.33 | CBG_ | Looking in /Library/App Suport/BZflag/2.0/ |
| 16:39.41 | CBG_ | menotume: thats what I did |
| 16:39.49 | CBG_ | blast007, k. i'll try |
| 16:40.16 | menotume | i mean see if your change is there in bzflag client, not by looking for the conf file |
| 16:41.54 | CBG_ | ah, k |
| 16:42.12 | *** part/#bzflag RPG_ (n=G-bus@c-24-15-87-171.hsd1.il.comcast.net) |
| 16:42.29 | CBG_ | Ughg |
| 16:42.51 | CBG_ | some confusion over the name of this account. there are 2 folders for it under Mac HD/Users/ |
| 16:43.40 | CBG_ | How can I "merge" two folders easily... hmm...? |
| 16:50.50 | CBG_ | ok, dunno what I did, but its working now |
| 16:52.11 | CBG_ | ;) |
| 16:54.05 | *** join/#bzflag JeffM2501 (n=JeffM@pdpc/supporter/sustaining/JeffM2501) |
| 16:54.05 | *** mode/#bzflag [+o JeffM2501] by ChanServ |
| 17:08.02 | *** join/#bzflag CBG (n=CBG@cpc2-stme1-5-1-cust130.cdif.cable.ntl.com) |
| 17:09.31 | devster | bah what use is making people register and identify when /identify doesnt wanna work |
| 17:11.21 | uso | yay, jitter kick :) |
| 17:11.29 | Tupone | /identify should be removed ... when we all agree |
| 17:11.33 | uso | now only kick for packet loss is missing ;) |
| 17:12.29 | ToughShooter | uso: nonono, GU would kick me then over and over :/ |
| 17:13.18 | uso | Tupone: at the moment i would prefer local auth again, global sucks totally ;) |
| 17:14.07 | uso | we lost minutes before all are authenticated on matches |
| 17:14.16 | uso | *were |
| 17:15.31 | *** join/#bzflag mmu_man (i=revol@ALyon-253-1-80-2.w86-202.abo.wanadoo.fr) |
| 17:16.06 | devster | so how do you identify when you cant use /identify? |
| 17:16.18 | ToughShooter | rejoin and hope it works |
| 17:16.26 | devster | i have |
| 17:18.35 | blast007 | the /identify is only for local auth |
| 17:18.51 | blast007 | if you are registered globally, then /identify does nothing for you |
| 17:19.02 | devster | how do you identify for global auth then? |
| 17:19.19 | blast007 | you put your username/password on the join page |
| 17:19.31 | blast007 | from the bzbb forum |
| 17:19.38 | devster | that may make sense :) |
| 17:49.32 | *** join/#bzflag katy (n=519cf3b0@genesis.concept69.de) |
| 18:18.40 | *** join/#bzflag Birdie (n=Birdie__@d54C34DE9.access.telenet.be) |
| 18:25.03 | *** join/#bzflag cynyr_ (n=cynyr@207.75.38.86) |
| 18:26.39 | *** join/#bzflag sussi (n=su@83-221-81-136.cable2.primacom.net) |
| 18:28.05 | devster | does it take time for the global auth to update or is it got from the forums auto? |
| 18:28.32 | Tupone | devster: you got the e-mail back ? |
| 18:29.10 | Tupone | if you can authenticate to the forum, you are able to play authenticated in bzflag |
| 18:29.13 | devster | well i had signed up but forgot pass so changed it and it says global auth rejects, bad token. but i can sign in fine on the forum |
| 18:30.00 | Tupone | hmm, possibly you have a proxy-cache :/ |
| 18:30.29 | devster | does it go off ip? |
| 18:31.32 | Tupone | devster: if you list server you get a number in bzflag? lower part? |
| 18:32.47 | devster | cant see one |
| 18:33.13 | devster | i assume by list server you mean go on find server? |
| 18:33.44 | Tupone | yes. you have to write the exact nick you use in the forum and the same password |
| 18:34.00 | devster | yep i have |
| 18:34.37 | blast007 | password may be case sensitive |
| 18:35.07 | devster | its the same |
| 18:35.26 | blast007 | if that doesn't work, locate the "#set list" line in your config, remove the #, and change the my.bzflag.org part to my.bzflag.org:81 |
| 18:35.59 | Tupone | <PROTECTED> |
| 18:36.05 | Tupone | :( I'm slow |
| 18:36.20 | devster | wheres the config likely to be? |
| 18:36.28 | devster | or whats it called |
| 18:36.41 | Tupone | devster: OS ? |
| 18:36.55 | devster | linux |
| 18:37.06 | Tupone | ~/.bzf/2.0/config.cfg |
| 18:37.10 | devster | k |
| 18:38.20 | devster | ok that worked, i take it does some IP checking? |
| 18:39.15 | blast007 | you probably have a web proxy |
| 18:40.33 | devster | i do, forced transparent one |
| 18:50.12 | blast007 | when you globally identify, it stores your IP in the database, and the bzflag server compares that to the IP you are connecting from |
| 18:50.24 | blast007 | so proxies mess it up, and port 81 typically bypasses proxies |
| 19:09.57 | *** join/#bzflag Blue_Eyes (n=Blue@host109-148.pool8256.interbusiness.it) |
| 19:11.44 | CIA-3 | BZFlag: 03atupone * 10bzflag/src/bzfs/commands.cxx: err ... debugging lines should go |
| 19:44.07 | *** join/#bzflag lan56 (i=lan56@user-vcauses.dsl.mindspring.com) |
| 20:00.47 | *** join/#bzflag TimRiker (n=timr@rikers.org) |
| 20:00.47 | *** mode/#bzflag [+o TimRiker] by ChanServ |
| 20:08.54 | *** join/#bzflag wizatcomputer (n=wizatcom@pool-71-161-33-36.clppva.east.verizon.net) |
| 20:14.47 | *** join/#bzflag PuMpErNiCkLe (n=Moitd@CPE000d8802a749-CM0012c9a9a6dc.cpe.net.cable.rogers.com) |
| 20:21.38 | *** join/#bzflag learner (n=brlcad@pdpc/supporter/silver/brlcad) |
| 20:21.38 | *** mode/#bzflag [+o learner] by ChanServ |
| 20:34.56 | *** join/#bzflag cynyr (n=cynyr@207.75.39.241) |
| 20:35.29 | Legoguy | bah segfault -_- |
| 20:35.55 | Tupone | Legoguy: what version? |
| 20:36.07 | Tupone | 2.0.x ? |
| 20:47.54 | Legoguy | ye |
| 20:48.30 | Legoguy | i also get weird screen freezes that are fixed by pressing f1 twice to switch to windowed mode and back |
| 21:17.18 | *** join/#bzflag cynyr_ (n=cynyr@207.75.39.241) |
| 21:25.52 | Legoguy | GAHH there it goes again |
| 21:25.56 | Legoguy | third time today |
| 21:26.01 | blast007 | Legoguy: can you elaborate on the "screen freezes"? |
| 21:36.11 | *** join/#bzflag PuMpErNiCkLe (n=Moitd@CPE000d8802a749-CM0012c9a9a6dc.cpe.net.cable.rogers.com) |
| 21:44.07 | *** join/#bzflag wizart (n=wizart@dslb-084-058-173-243.pools.arcor-ip.net) |
| 21:47.26 | *** part/#bzflag ToughShooter (n=ts@p54B01E9F.dip0.t-ipconnect.de) |
| 22:01.15 | *** join/#bzflag brad2901 (i=one@unaffiliated/brad2901) |
| 22:02.09 | Legoguy | GAH fourth segfault |
| 22:03.20 | Legoguy | well, the HUD flickers, and opponent tanks + everything except for the map itself disappears -- audio still works, i can still shoot (although they dont appear) |
| 22:03.34 | Legoguy | and i can still be killed etc |
| 22:03.34 | blast007 | strange |
| 22:03.42 | Legoguy | only way to fix it is to hit f1 twice |
| 22:03.54 | Legoguy | NVRM: Xid: 3, C 00000002 SC 00000001 M 0000180c Data 00000002 |
| 22:03.54 | Legoguy | NVRM: Xid: 27, L1 -> L0 |
| 22:03.55 | blast007 | what video card? |
| 22:03.56 | Legoguy | hmmmmm |
| 22:04.01 | Legoguy | maybe its something to do with nvidia drivers |
| 22:04.45 | Legoguy | (those are nvidia driver debugging lines from dmesg, appears that another one pops up in the log every time the problem happens |
| 22:04.47 | *** join/#bzflag Guest021 (n=8c6ac001@genesis.concept69.de) |
| 22:05.53 | Legoguy | geforce fx 5900 128mb, btw |
| 22:06.36 | blast007 | do you have the latest drivers? |
| 22:07.56 | blast007 | could also try compiling the client in debug, and running it through gdb |
| 22:13.23 | uso | what is the key to confirm the hunt mode? |
| 22:13.37 | lan56 | 'space |
| 22:13.49 | Birdie | i have shooting for that:s |
| 22:14.06 | lan56 | then check the key mapping options menu |
| 22:14.15 | lan56 | no wait |
| 22:14.20 | uso | which key mapping is it? |
| 22:14.31 | lan56 | I know but the space will work if you have a target nominated |
| 22:14.32 | brad2901 | enter ? |
| 22:14.34 | uso | neither enter nor space works |
| 22:14.46 | brad2901 | what do you shoot with? |
| 22:14.53 | uso | i can only type u to get out of hunt selection |
| 22:15.28 | lan56 | you type 'u', then select the target using up/down, then try space/enter to select, correct? |
| 22:15.30 | uso | ah, one of the fire keys works :) |
| 22:16.03 | uso | not that intuitive ;) |
| 22:16.12 | uso | thanks |
| 22:16.24 | lan56 | np |
| 22:16.39 | uso | should really be space or enter ;) |
| 22:17.08 | lan56 | yeah |
| 22:20.48 | *** join/#bzflag DTRemenak (n=DTRemena@DHCP-170-143.caltech.edu) |
| 22:20.48 | *** mode/#bzflag [+v DTRemenak] by ChanServ |
| 22:29.51 | blast007 | it depends on your key mapping |
| 22:30.10 | blast007 | iirc, shoot is to select, identify is to cycle through names |
| 22:32.03 | *** join/#bzflag PuMpErNiCkLe (n=Moitd@CPE000d8802a749-CM0012c9a9a6dc.cpe.net.cable.rogers.com) |
| 22:32.10 | blast007 | '7' by default lets you do multihunt in newer versions |
| 22:32.24 | lan56 | wow multihunt sounds neat |
| 22:32.40 | blast007 | it was a bug in the past, but it was made into a feature |
| 22:32.53 | PuMpErNiCkLe | Multihunt sounds really useful... track teh GM camper AND the laser camper at the same time :D |
| 22:33.02 | blast007 | yup ;) |
| 22:33.11 | PuMpErNiCkLe | I'll have to try this. |
| 22:33.43 | menotume | you can also toggle a player on/off hunt with '7' |
| 22:34.00 | menotume | so, kill the laser, and un hunt him :) |
| 22:34.21 | menotume | but, keep the GM hunted |
| 22:35.04 | PuMpErNiCkLe | excellent |
| 22:35.19 | PuMpErNiCkLe | Does the regular hunt key batch-untoggle them, then? |
| 22:35.25 | menotume | yes |
| 22:35.55 | menotume | if it doesn't work, tell brad2901 |
| 22:36.00 | PuMpErNiCkLe | k |
| 22:36.03 | menotume | errr, i mean blast007 |
| 22:36.09 | menotume | :P |
| 22:36.26 | blast007 | heh |
| 22:38.13 | *** join/#bzflag PuMpErNiCkLe (n=Moitd@CPE000d8802a749-CM0012c9a9a6dc.cpe.net.cable.rogers.com) |
| 22:38.23 | PuMpErNiCkLe | It works. :) |
| 22:39.37 | blast007 | :) |
| 22:39.47 | menotume | yay |
| 22:40.07 | PuMpErNiCkLe | indeed |
| 22:41.54 | *** join/#bzflag kyelewis` (n=kyelewis@freematrix/staff/kyelewis) |
| 22:49.46 | CIA-3 | BZFlag: 03lan56 * 10bzflag/ (NEWS src/bzflag/clientCommands.cxx): |
| 22:49.46 | CIA-3 | BZFlag: fix/entertain feature request #1121175 - "Screenshot number doesn't increment": |
| 22:49.46 | CIA-3 | BZFlag: -append screenshots using 1 + highestNumberedShot, instead of overwriting existing ones, starting at bzfi0000.png |
| 22:51.43 | *** join/#bzflag orchid_ (n=bzgirl@unaffiliated/orchid) |
| 22:51.43 | *** mode/#bzflag [+v orchid_] by ChanServ |
| 22:52.09 | brad2901 | Is "SAWSES" registered and activated on the forums? |
| 22:53.25 | lan56 | btw someone using non-windows oughta test that commit about the screenshots. while I programmed it to the best I could, and I even tried compiling it to see any errors I made, I havent tested it, so while the syntax may be fine, and I am pretty sure it would work well, nothing guarantees a-okayness like a test :) |
| 22:54.19 | lan56 | the code uses the basics of the world file code for server start menu |
| 22:54.48 | PuMpErNiCkLe | I took some screenshots earlier ('bout a month ago - stable 2.0.4 build) and it incremented them. o_O |
| 22:54.49 | *** join/#bzflag CBG (n=CBG@cpc2-stme1-5-1-cust130.cdif.cable.ntl.com) |
| 22:55.14 | menotume | yes, it did, but numbers were reset to 0 when client starts |
| 22:56.00 | *** join/#bzflag ep (n=ep@ip68-97-127-76.ok.ok.cox.net) |
| 22:57.49 | PuMpErNiCkLe | not for me O_o |
| 22:58.10 | PuMpErNiCkLe | odd |
| 22:58.47 | PuMpErNiCkLe | (I was quitting/reopening BZflag because I was trying to get a decent screenshot for my desktop background...) |
| 22:59.07 | CBG | TimRiker: ping. |
| 22:59.27 | TimRiker | CBG: pong? |
| 23:00.39 | CBG | I have had purl in #kas for some time now (Thanks, again), but now apt is there too... Any reason for that? |
| 23:01.13 | TimRiker | CBG: sounds like a bug. |
| 23:01.17 | TimRiker | cd #kas |
| 23:01.19 | TimRiker | hehe |
| 23:01.31 | CBG | Heh. So I'll just kick apt, k? |
| 23:03.31 | TimRiker | CBG: fixed. not sure how that happened. feel free to kick one in the future. |
| 23:03.42 | CBG | Ok, will do. Thanks. |
| 23:04.57 | *** part/#bzflag PuMpErNiCkLe (n=Moitd@CPE000d8802a749-CM0012c9a9a6dc.cpe.net.cable.rogers.com) |
| 23:20.58 | *** join/#bzflag PuMpErNiCkLe (n=Moitd@CPE000d8802a749-CM0012c9a9a6dc.cpe.net.cable.rogers.com) |
| 23:25.34 | *** join/#bzflag CannonBall (n=CBG@cpc2-stme1-5-1-cust130.cdif.cable.ntl.com) |
| 23:31.35 | *** join/#bzflag mmu_man (i=revol@ALyon-253-1-59-200.w86-193.abo.wanadoo.fr) |
| 23:39.36 | *** join/#bzflag wizatcomputer (i=wizatcom@pool-71-161-33-36.clppva.east.verizon.net) |
| 23:40.56 | *** join/#bzflag lan56 (i=lan56@user-vcauur5.dsl.mindspring.com) |
| 23:45.49 | *** part/#bzflag PuMpErNiCkLe (n=Moitd@CPE000d8802a749-CM0012c9a9a6dc.cpe.net.cable.rogers.com) |
| 23:58.16 | Tupone | admin required on gu.de |
| 23:58.40 | Birdie | coming |
| 23:58.51 | Tupone | nomore ... a tk |
| 23:58.54 | Tupone | gone |
| 23:59.25 | Birdie | ok |
| 23:59.30 | Birdie | sorry for the lag i had into answering:) |
| 23:59.44 | Tupone | no, he was faster |