| 00:00.05 | IriX64 | all right |
| 00:00.29 | brlcad | maybe keep this dir off to the side so that we can continue this over a few days .. but leaving it alone so we can get it to build cleanly |
| 00:01.00 | IriX64 | ill do that thanks for tthe help, ill just switch back to 7.8.4 for a few days |
| 00:15.44 | IriX64 | this is the kind of summary I prefer, i changed the version number cause i did a little playing with the code rot comes to mind and some other stuff like the raytrace control panel. http://www.pastebin.ca/577656 |
| 00:17.31 | IriX64 | angle distance cursor is neat too |
| 00:22.00 | IriX64 | brlcad: what's your cleanest line of code, I'm happy the bsd but if you suggest cleaner i'll use it. |
| 00:22.11 | IriX64 | s/if/the |
| 00:22.21 | IriX64 | err with |
| 00:23.21 | IriX64 | supposed to isn't it? |
| 00:23.49 | IriX64 | i start mine from dos :P |
| 00:23.55 | yukonbob | it's supposed to use DISPLAY to know which (if any) X display to use... |
| 00:24.15 | yukonbob | (that's the typical X client action). |
| 00:24.23 | IriX64 | but it picks up the default that xterm is running on, proper behaviour |
| 00:24.48 | yukonbob | not if it's reset... ie: export DISPLAY=''; mged |
| 00:25.04 | yukonbob | does same from a console completely unrelated to X as well... |
| 00:25.18 | IriX64 | my system might be different (ie cygwin) |
| 00:25.56 | yukonbob | do you have xeyes installed? |
| 00:26.06 | IriX64 | think so wait |
| 00:26.14 | yukonbob | if so, try: export DISPLAY=''; xeyes |
| 00:26.49 | yukonbob | or better: env DISPLAY='' xeyes |
| 00:26.59 | yukonbob | (won't have to reset DISPLAY variable) |
| 00:27.16 | IriX64 | from an xterm prompt or console prompt? |
| 00:27.26 | yukonbob | xterm |
| 00:27.37 | IriX64 | lemme fire x up |
| 00:27.38 | yukonbob | just try 'xeyes' first |
| 00:27.57 | yukonbob | you should get a pair of googley eyes following your mouse cursor... |
| 00:28.01 | yukonbob | ^C to get rid of them. |
| 00:28.40 | IriX64 | got them |
| 00:28.52 | IriX64 | gone |
| 00:29.03 | yukonbob | now try w/ the "env DISPLAY='' xeyes" |
| 00:29.14 | yukonbob | (no double-quotes) |
| 00:30.16 | IriX64 | got a > |
| 00:30.37 | yukonbob | env DISPLAY='' xeyes |
| 00:30.49 | IriX64 | how do i get out of it, quit:) |
| 00:30.56 | yukonbob | prolly ^D |
| 00:31.05 | yukonbob | env DISPLAY='' xeyes |
| 00:31.12 | yukonbob | ^---two single quotes |
| 00:31.21 | yukonbob | (after DISPLAY=) |
| 00:31.40 | IriX64 | cant open display, your right |
| 00:31.51 | yukonbob | right... that's typical behaviour |
| 00:32.35 | IriX64 | thanks |
| 00:32.58 | IriX64 | learned i'm always wrong :P |
| 00:34.27 | yukonbob | or you learned you can always get smarter :) |
| 00:35.49 | IriX64 | that too :) |
| 00:36.17 | IriX64 | the seed of smartness though is hard to plant |
| 00:39.30 | IriX64 | so your saying theres a bug in mged yukonbob? |
| 00:41.13 | IriX64 | what happens if you set DISPLAY to 127.0.0.1:0.0 ? |
| 00:41.52 | yukonbob | I'd say when it tries to connect to servers that I don't specify, that's bad policy |
| 00:42.20 | IriX64 | it assumes you want a display window, thats its function |
| 00:42.28 | yukonbob | If I'm working on a super-secret fembot from a remote computer, but the display comes up on my work computer for my co-workers to see, that'd be embarassing |
| 00:42.59 | IriX64 | uses a default not entirely wrong behaviour |
| 00:43.06 | yukonbob | "assuming" isn't good policy. |
| 00:43.20 | yukonbob | if the DISPLAY="", their is no default display |
| 00:43.37 | IriX64 | but one was programmed in |
| 00:44.10 | yukonbob | it may loop through a pre-compiled list of likely possibilities, but I'd say that's bad policy. |
| 00:44.42 | IriX64 | brlcad said to somebody today no environment variables are neccessary if installed correctly |
| 00:45.14 | yukonbob | DISPLAY can be depended on in an X environment though --- otherwise X clients just won't work ;) |
| 00:45.29 | IriX64 | :) |
| 00:46.37 | yukonbob | brlcad probably meant that there are no special environment variables that need to be set 'by hand'. |
| 00:46.45 | IriX64 | love my system, did all that while compiling brlcad and ripping cassette tape. |
| 00:46.58 | IriX64 | your probably right |
| 00:48.44 | fgleich | you have to add the bin to your PATH, right ? |
| 00:48.59 | IriX64 | yes |
| 00:49.04 | yukonbob | or put the bin in a path that's already set ;) |
| 00:49.07 | IriX64 | brlcad/bin |
| 00:49.12 | IriX64 | :) |
| 00:52.34 | *** join/#brlcad Twingy (n=justin@74.92.144.217) |
| 01:01.11 | IriX64 | http://irix32.spaces.live.com/photos/brlcad added some stuff, feel free to spread that url around |
| 01:38.16 | *** join/#brlcad gamedev (n=dave@unaffiliated/gamedev) |
| 01:39.41 | *** part/#brlcad gamedev (n=dave@unaffiliated/gamedev) |
| 01:41.27 | IriX64 | http://www.pastebin.ca/577788 a benchmark with optimized on debug off |
| 01:52.56 | IriX64 | well bu_bomb() works... terra.g is using a null pointer somewhere caught by bu_ckmag |
| 01:53.06 | IriX64 | in 7.8 |
| 02:06.18 | yukonbob | can anybody tell me why when I make (for example) a vertical post (in post rcc 0 0 0 0 0 100 1) and a wire joining top of post to ground (in wire rcc 0 0 100 100 0 0 0.1), the "wire" doesn't seem to reflect the angle it should be at, and maybe not even the length? (I'm know it's going to be operator error, but I don't know what that error is yet ;) |
| 02:11.55 | IriX64 | are you saying i'm dumb as a post :P |
| 02:21.49 | IriX64 | http://irix32.spaces.live.com/photos brlcad albumn, my first "real one" :) |
| 02:33.06 | *** join/#brlcad RodGallowGlass_ (n=mario_du@bas2-sudbury98-1177592894.dsl.bell.ca) |
| 02:35.02 | IriX64 | bsod lovely |
| 02:36.06 | IriX64 | the blog has one with the work environment enabled, adc grid axes indicators faceplate etc |
| 03:29.36 | poolio | moore late night coding 8) |
| 05:09.13 | CIA-4 | BRL-CAD: 03poolio * 10brlcad/doc/cvs.txt: CVS moved from cvs.sf.net to brlcad.cvs.sf.net |
| 05:09.22 | poolio | et voila :) |
| 05:10.08 | brlcad | woot |
| 05:10.14 | brlcad | ~poolio++ |
| 05:10.43 | poolio | so should I just add a new folder and the one file I'm working off of to src/gtools too? |
| 05:11.24 | brlcad | sure |
| 05:18.06 | poolio | is there a reason it's u,v,i axis and not x,y,z? |
| 05:20.22 | brlcad | what are you referring to? |
| 05:20.31 | poolio | q_ga mainly |
| 05:21.41 | brlcad | probably no "strong reason" other than thinking of the grid being fired as a u,v parameter space instead of just coordiantes in 3-space |
| 05:21.43 | poolio | and I'm guessing I need to include the massive copyright headers I hate? |
| 05:22.04 | brlcad | yep, they're boilerplate |
| 05:22.12 | brlcad | you can auto-add them, however, using a script |
| 05:22.21 | brlcad | sh/template.sh lgpl yourfile.c |
| 05:22.48 | brlcad | can be used to stub empty files or add header/footers to existing files |
| 05:25.32 | poolio | and is there a name I should use for the shape I'm trying to match? I've been just calling it the model but that's not at all what it is |
| 05:28.36 | brlcad | it is "a model" |
| 05:29.01 | brlcad | just not "the model" that you're trying to generate |
| 05:29.11 | poolio | so we're trying to match a csg population to the model? |
| 05:29.48 | brlcad | maybe call it the source or the source pattern or the reference shape, etc |
| 05:30.11 | poolio | I'll just reference it as the source model for now |
| 05:30.15 | poolio | wait no |
| 05:30.25 | poolio | just plain source...haha |
| 05:43.43 | poolio | alright, i'm gonna commit me code, cya in the mornin. |
| 05:44.16 | brlcad | won't be available much of tomorrow day-time, but back in the afternoon/evening |
| 05:44.40 | poolio | alright, I think I'm pretty much know what I'll be doing, so hopefully I'll have progress to show you then. ta ta. |
| 05:51.09 | *** join/#brlcad Laniakea (i=clock@217-162-206-147.dclient.hispeed.ch) |
| 05:55.06 | poolio | damn vim! I comcommited a .swp file.... |
| 05:55.09 | CIA-4 | BRL-CAD: 03poolio * 10brlcad/src/gtools/beset/fitness.c: initial base for _beset_: ben's evolutionary shape extraction tool |
| 06:07.03 | *** join/#brlcad elite01 (n=elite01@195.37.106.60) |
| 07:20.41 | *** join/#brlcad Laniakea (n=clock@zux221-122-143.adsl.green.ch) |
| 08:43.21 | *** join/#brlcad akreal (n=ak@ll-81-222-164-251.awanti.ru) |
| 10:14.41 | *** join/#brlcad akreal (n=ak@ll-81-222-164-251.awanti.ru) |
| 10:14.52 | *** part/#brlcad akreal (n=ak@ll-81-222-164-251.awanti.ru) |
| 10:33.19 | *** join/#brlcad elite01 (n=elite01@195.37.106.60) |
| 11:18.10 | *** join/#brlcad Elperion (n=Bary@p54874C30.dip.t-dialin.net) |
| 13:36.45 | CIA-4 | BRL-CAD: 03brlcad * 10brlcad/configure.ac: if we're building with cygwin, tk wants access to headers in the tk/win directory, so add it to the cppflags header search paths |
| 13:36.54 | brlcad | IriX64: cvs update configure.ac && ./autogen.sh && ./configure && make |
| 13:53.42 | poolio | mornin brlcad :) |
| 13:54.22 | *** join/#brlcad SWPadnos (n=Me@dsl245.esjtvtli.sover.net) |
| 13:58.52 | brlcad | mornin' poolio |
| 13:59.39 | poolio | I committed beset last night :) |
| 14:00.21 | poolio | is the coding style ok? I tried to mirror the way g_qa was formatted |
| 14:00.30 | poolio | and from the HACKING document |
| 14:47.03 | poolio | brlcad: does BU_LIST manage its own cleanup? |
| 14:54.55 | brlcad | erm, how would they do that? |
| 14:55.09 | brlcad | they only do what the code you write makes them do |
| 14:55.09 | poolio | I haven't a clue, but in g_qa the linked lists never get free'd |
| 14:55.41 | brlcad | ah, yeah .. just bad form from the author (shame on lee) |
| 14:55.55 | brlcad | he's relying on exit to free resources since it's not reused |
| 14:55.57 | poolio | ok, was wondering if C magically had garbage collection :) |
| 14:56.17 | brlcad | it magically collects when the program terminates ;) |
| 14:56.31 | poolio | well, as long as it thinks the resource won't be reused |
| 14:56.58 | brlcad | right, and for that tool it's pretty much guaranteed .. as are a lot of the command-line tools that perform some specific action |
| 14:57.31 | brlcad | your tool, however, is a little different in that it has a run loop that needs to iterate through samples over and over, potentially for a very long time |
| 14:57.48 | brlcad | g_qa should free it's stuff, don't let that be an example/excuse ;) |
| 14:57.51 | brlcad | shame on lee :) |
| 14:57.58 | poolio | alrighty |
| 14:58.22 | poolio | If I can get a version of beset to work on say... a single primitive I'd probably want to do a lot of optimizing |
| 14:59.01 | brlcad | that will probably be the time to make sure multithreading works, maybe run a sanity profile |
| 14:59.21 | poolio | what's up with the second argument to bu_malloc and bu_free ? |
| 14:59.24 | brlcad | valgrind for memory |
| 14:59.36 | poolio | heh, I love valgrind |
| 14:59.48 | poolio | also: I can test multithreading on my system, i have 2 cores |
| 14:59.52 | brlcad | the second argument is a label |
| 15:00.02 | poolio | but is there a point to that label, and does it have to be unique? |
| 15:00.33 | brlcad | libbu has it's own memory protections and debugging facilities.. you add those labels and with certain flags enabled, you can see a allocation trace where you can find your allocations via those labels |
| 15:00.48 | poolio | alright so it's mainly for debugging? |
| 15:00.54 | brlcad | entirely for debugging |
| 15:01.15 | brlcad | but it should just be something sensible, and the free label should pair up with the alloc label |
| 15:01.28 | poolio | alright |
| 15:02.32 | brlcad | and in case you hadn't read/noticed elsewhere in the docs -- libbu guarantees allocations so you never have to check return pointers from bu_malloc() and friends |
| 15:02.55 | poolio | yeah I read that, it's very nice :) |
| 15:03.16 | poolio | does it exit the program if it can't allocate space? |
| 15:03.26 | brlcad | yes, it will abort |
| 15:04.45 | brlcad | running out of memory is considered a fatal error, and having spagetti code to handle the extremely rare cases where you might be able to recover gracefully doing something OTHER than exit() just isn't worth the complexity it adds |
| 15:06.55 | brlcad | also, there is a way to catch out-of-memory conditions if you really do want to "keep going" .. just by default it will abort |
| 15:07.20 | poolio | cool, good development choice :) |
| 15:09.13 | poolio | brlcad: Is there a way to go from Makefile.am in my directory --> Makefile without running a whole ./configure and adding my directory to the build list? |
| 15:50.59 | brlcad | nope, gotta add it though once you add it, it should rebuild the Makefile after Makefile.am edits |
| 15:52.44 | brlcad | have to add it eventually regardless so might as well be sooner rather than later |
| 15:52.56 | poolio | Yeah I did to my local build |
| 15:54.06 | poolio | wait,w hat do I have to modify besides configure.ac and the creation of the Makefile.am in the directory? |
| 16:02.25 | poolio | ah d'oh, forgot to run autogen.sh |
| 16:09.21 | poolio | Uh oh> unless I broke something, someone broke something in CVS... |
| 16:09.31 | poolio | opennurbs_bezier.cpp:1149: error: 'assert' was not declared in this scope |
| 16:47.42 | IriX64 | poolio.... just needs a #include <assert.h> and it'll be fine. |
| 16:58.41 | poolio | Yeah I added it in a while ago :) |
| 17:07.07 | IriX64 | cool |
| 17:11.08 | IriX64 | http://www.pastebin.ca/579383 <---- poolio i don't understand this part of configure.ac can you explain? |
| 17:11.34 | IriX64 | my x keeps coming up not detected and i think this is why |
| 17:11.51 | IriX64 | line 3336 of configure.ac |
| 17:24.56 | poolio | So it's running the program specified from 3335 through 3341 |
| 17:25.03 | IriX64 | yes |
| 17:25.22 | poolio | and returning either 1 or 0 based off of whether xmkm is null |
| 17:25.41 | IriX64 | man 7.8.4 detects my x |
| 17:25.43 | poolio | so basically the reason X isn't working is because XNewModifiermap(1) returns NULL instead of an non-NULL value like it should if it was succesful |
| 17:26.05 | poolio | well what's changed since then? |
| 17:26.30 | IriX64 | noithing on my end they changed the check |
| 17:26.39 | IriX64 | err nothing |
| 17:26.39 | poolio | I know, what's changed in the check |
| 17:26.53 | poolio | It could be your version of X doesn't support the test they are trying to perform |
| 17:27.00 | IriX64 | ill have to compare them again |
| 17:27.08 | IriX64 | x11r6 man |
| 17:27.22 | poolio | =P good luck |
| 17:27.32 | IriX64 | thanks :) |
| 17:28.34 | IriX64 | i'll code around it what the heck i know ive got x and the libs detection works so *shrug |
| 17:31.23 | IriX64 | thanks poolio |
| 17:35.58 | poolio | it appears like "< # XXX ugly hack that needs to die |
| 17:36.02 | poolio | died :) |
| 17:40.06 | IriX64 | ahh you compared? i just changed it a bit |
| 17:40.13 | poolio | IriX64: So in the current configure.ac another check was added that tests to see if some Xmodifier stuff is working. I'm guessing that your environment fails that test. |
| 17:40.25 | poolio | run it on your own and see what results you get |
| 17:40.29 | poolio | #include <X11/Xlib.h> |
| 17:40.32 | IriX64 | probably right |
| 17:40.50 | IriX64 | i'm that out of date ? :) |
| 17:41.04 | poolio | I guess |
| 17:41.17 | poolio | I was gonna type out a one line version of the program but i figure you're fully capable of copy/paste |
| 17:41.21 | IriX64 | wonder what will break :) |
| 17:41.24 | IriX64 | am |
| 17:41.41 | IriX64 | not that interested |
| 17:42.10 | IriX64 | just haven't seen return==null |
| 17:42.18 | IriX64 | i dont use that |
| 17:42.54 | poolio | well it's return value==null |
| 17:43.11 | IriX64 | so why bother why not just return 0? |
| 17:43.35 | poolio | well it shortens code. You can do if(value==NULL) return 1; else return 0; |
| 17:43.41 | poolio | it's a lot longer than just return value==NULL; |
| 17:43.55 | IriX64 | sigh |
| 17:45.02 | *** join/#brlcad elite01 (n=elite01@dslc-082-082-083-058.pools.arcor-ip.net) |
| 17:45.05 | poolio | t looks like it should be in x11r6 though |
| 17:45.06 | IriX64 | why not just return value 0 ? 1 |
| 17:45.23 | IriX64 | yeah |
| 17:45.45 | poolio | (condition)? 0 : 1 ? |
| 17:45.48 | poolio | i don't think it works there |
| 17:45.56 | IriX64 | might |
| 17:46.26 | poolio | yeah it does, but it's still longer |
| 17:46.34 | IriX64 | im happy for now it configures |
| 17:46.43 | poolio | Yeah, but what'd you break? |
| 17:46.51 | IriX64 | my ankle :P |
| 17:47.05 | poolio | sorry. feel better. i'm gonna grab some lunch :) |
| 17:47.14 | IriX64 | heh thanks man |
| 17:53.33 | *** join/#brlcad Laniakea (i=clock@217-162-228-127.dclient.hispeed.ch) |
| 17:54.10 | IriX64 | Laniakea: cheers |
| 17:54.17 | Laniakea | IriX64: cheers |
| 17:54.23 | IriX64 | :) |
| 17:55.19 | IriX64 | mmm that was fast, you're not like me, I type with two fingers :) |
| 17:55.38 | poolio | do you really? |
| 17:55.49 | IriX64 | yes never learned to type |
| 17:55.53 | Laniakea | IriX64: do you have ZX Spectrum? |
| 17:56.17 | IriX64 | what on earth is ZXSpectrum? |
| 17:56.23 | Laniakea | nothing |
| 17:56.37 | IriX64 | I know, if you have to ask you don't know :) |
| 17:57.20 | Laniakea | my secret retro dream is to get a casette recorder |
| 17:57.25 | IriX64 | poolio too old to unlearn how i do it now and replace it with a new way |
| 17:58.09 | IriX64 | mine is to transfer all my music from 12" reels to cd someday |
| 17:58.21 | IriX64 | err 10.5" |
| 17:58.36 | poolio | geez |
| 17:58.39 | poolio | never too old! |
| 17:58.50 | IriX64 | heh tel it to my soul |
| 17:58.54 | IriX64 | tell too |
| 17:59.08 | IriX64 | i hate unlearning, its hard |
| 17:59.59 | IriX64 | i'm waiting for a computer I can just tell what to do :) |
| 18:00.46 | IriX64 | cassette recorder, they're available still |
| 18:01.35 | IriX64 | nikki break (no not Nikki Lawerence) I'll be back |
| 18:18.05 | IriX64 | in bu_bomb() I added an fcloseall() to try to protect the database for what it's worth |
| 18:18.28 | IriX64 | just before the abort() |
| 18:40.17 | IriX64 | http://irix32.spaces.live.com/photos the BrlCad albumn |
| 18:46.36 | IriX64 | gotta figure a way of putting a bash shell in there so you can run your script tools |
| 18:46.58 | IriX64 | sh should fit the bill |
| 18:54.23 | IriX64 | same url latest build raytracing (1st Pix) and btw is this sort of thing allowed in the channel? |
| 18:56.13 | *** join/#brlcad jimmyz (n=asd@host81-157-197-75.range81-157.btcentralplus.com) |
| 19:04.32 | IriX64 | mental note, don't start a photon map during a compile :) |
| 19:17.21 | IriX64 | http://www.pastebin.ca/579607 haha |
| 19:21.44 | IriX64 | mmm exec sh now works |
| 19:21.48 | IriX64 | sweet |
| 19:24.12 | IriX64 | ok i'm ready to build a mug :) |
| 19:29.13 | *** join/#brlcad docelic (n=docelic@212.15.178.146) |
| 19:33.24 | IriX64 | same url brlcad albumn 1st pix |
| 19:45.38 | poolio | IriX64: your webspace is b0rked. |
| 19:47.34 | IriX64 | huh? |
| 19:47.39 | IriX64 | loads here |
| 19:47.53 | IriX64 | whats the problem? |
| 19:47.56 | poolio | XML Parsing Error: syntax error |
| 19:47.56 | poolio | Location: http://irix32.spaces.live.com/photos/ |
| 19:47.56 | poolio | Line Number 3, Column 49:<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN"> |
| 19:48.06 | IriX64 | what browser |
| 19:48.17 | poolio | iceweassel (firefox), but it worked fine the other day |
| 19:49.54 | IriX64 | windows firefox loads it fine |
| 19:50.34 | IriX64 | sorry man dunno what to say |
| 19:50.54 | poolio | You don't need to say anything. I have to get back to work :) |
| 19:51.08 | IriX64 | is there a .org that allows png upload? |
| 19:51.20 | IriX64 | me too :) |
| 19:52.25 | IriX64 | try it now |
| 19:54.41 | IriX64 | b0rked eh? now it's borst eat hearty :) |
| 19:56.01 | IriX64 | reminds me must point ppl to http://brlcad.org in the caption field |
| 19:57.24 | IriX64 | there |
| 20:43.43 | *** join/#brlcad Elperion (n=Bary@p54874C30.dip.t-dialin.net) |
| 20:48.52 | CIA-4 | BRL-CAD: 03jlowenz * 10brlcad/include/opennurbs_ext.h: move the debugging defines into one place; implement correct ON_Ray copy ctor/asst operator; fix node intersection |
| 20:54.31 | CIA-4 | BRL-CAD: 03jlowenz * 10brlcad/src/librt/g_brep.cpp: |
| 20:54.31 | CIA-4 | BRL-CAD: added bounding-box plotting for debugging purposes; fixed memory leak |
| 20:54.31 | CIA-4 | BRL-CAD: in shot routine; debugging acne/odd hit count problems (currently not |
| 20:54.31 | CIA-4 | BRL-CAD: finished!!); renamed existing debug statements (should just remove them!) |
| 20:56.37 | CIA-4 | BRL-CAD: 03jlowenz * 10brlcad/src/librt/opennurbs_ext.cpp: fixed bug in bounding box generation: wasn't capturing true dimensions, now using openNURBS BB routine for initial calc; some more debugging stmts |
| 20:59.25 | CIA-4 | BRL-CAD: 03jlowenz * 10brlcad/src/other/openNURBS/opennurbs_bezier.cpp: fixed (? maybe) the bezier clipping algorithm infinite recursion when the clip is too large |
| 21:03.42 | *** join/#brlcad poolio_ (n=poolio@c-69-251-3-107.hsd1.md.comcast.net) |
| 21:08.24 | *** join/#brlcad RodGallowGlass_ (n=mario_du@bas2-sudbury98-1177879089.dsl.bell.ca) |
| 21:08.29 | *** join/#brlcad yukonbob (n=bch@whthyt224-180.northwestel.net) |
| 21:34.51 | yukonbob | can anybody tell me why when I make (for example) a vertical post (in post rcc 0 0 0 0 0 100 1) and a wire joining top of post to ground (in wire rcc 0 0 100 100 0 0 0.1), the "wire" doesn't seem to reflect the angle it should be at, and maybe not even the length? (I'm know it's going to be operator error, but I don't know what that error is yet ;) |
| 21:39.35 | IriX64 | mine doesn't have either of those. |
| 21:40.13 | IriX64 | http://www.pastebin.ca/579886 heh |
| 21:41.32 | IriX64 | i set the color to peach and it raytraced it sweet |
| 21:42.52 | poolio | IriX64: Have you ever tried a fully functional brl-cad install in a supported environment? |
| 21:43.42 | IriX64 | you calling mine something other than fully functional? |
| 21:44.03 | IriX64 | ill do anything you can do except adrt |
| 21:45.39 | poolio | I just wonder why you are so happy about the software working as expected =) |
| 21:46.03 | IriX64 | for me the worst thing that ever happened to brlcad was this so called upgrade of tcl/tk |
| 21:46.52 | IriX64 | i'm happy cause its doing it in windereze outside the cygwin environment |
| 21:47.20 | IriX64 | cause for rejoicing here :) |
| 21:48.01 | IriX64 | i can distribute this if so inclined |
| 21:48.23 | poolio | Ah yeah, GPLd |
| 21:48.29 | IriX64 | right |
| 21:48.53 | IriX64 | wouldnt charge for it anyway, most fun ive ever had :) |
| 21:49.05 | poolio | wow. dull life ;) |
| 21:49.15 | IriX64 | small things amuse me |
| 21:49.15 | poolio | well back to code... |
| 21:49.19 | IriX64 | me too |
| 21:52.02 | IriX64 | poolio many women are interested in brlcad, I'm simply trying to impress :P |
| 21:52.23 | poolio | IriX64: you wish ;) |
| 21:52.42 | IriX64 | don't we all |
| 21:52.57 | IriX64 | my version of a porche |
| 21:54.36 | poolio | porsche? |
| 22:04.26 | yukonbob | no porch... chicks dig porches. |
| 22:08.16 | IriX64 | ok lamborgini |
| 22:09.00 | IriX64 | http://irix32.spaces.live.com/photos the brlcad albumn, i present my cup for inspection :) |
| 22:09.09 | poolio | lamborghini? |
| 22:09.14 | IriX64 | sigh if you can access that page that is |
| 22:09.19 | poolio | IriX64: I still get that damn error |
| 22:09.22 | IriX64 | yes i cant spell |
| 22:09.57 | yukonbob | poolio: is that the xml error? |
| 22:10.05 | poolio | yukonbob: yeah |
| 22:10.17 | yukonbob | heh |
| 22:14.37 | poolio | yukonbob: You work on multithreaded code for brl-cad? |
| 22:18.37 | yukonbob | nope -- I'm new to BRLCAD -- so far I've exposed a malloc issue w/ displacement maps, and have done work (not published) on converting USGS DEMs->dsp data. |
| 22:19.40 | yukonbob | (and complained about the default mged DISPLAY handling, which I think is erroneous... need to point that out to <brlcad> ;) |
| 22:21.51 | IriX64 | maybe.... i should finish cup :) |
| 22:22.40 | IriX64 | yukonbob, if X is up mine connects, if its not it waits. |
| 22:23.01 | IriX64 | if you start with mged -c it asks |
| 22:24.00 | yukonbob | IriX64: right --- we went through this yesterday -- I still think default behaviour is incorrect. |
| 22:24.30 | IriX64 | your saying it should honor the display variable |
| 22:24.40 | yukonbob | like every other X client, yes. |
| 22:25.16 | IriX64 | just a sec what does yours do? |
| 22:26.01 | yukonbob | it doesn't honour the DISPLAY variable... it searches for X servers on it's own, and connects. |
| 22:26.19 | IriX64 | first available i take it |
| 22:26.37 | yukonbob | (it'll try using the DISPLAY variable, but if that doesn't work, it tries searching, that is) |
| 22:27.23 | IriX64 | but thats proper in a network and this thing is networked |
| 22:27.26 | poolio | I can't get mged running on my second display, but I haven't tried anything |
| 22:28.12 | yukonbob | IriX64: I don't think searching for non-explicitly-declared X displays is proper, and in fact it's dangerous |
| 22:28.59 | poolio | My pinky hurts. all the ctrl+keys and shift usage ... has hurt my pinky. :'(. |
| 22:29.09 | poolio | brlcad: Do I have some sort of injury coverage or worker's benefits? hahaha |
| 22:29.10 | IriX64 | heh |
| 22:38.22 | yukonbob | brlcad: you online currently? |
| 22:57.10 | *** join/#brlcad docelic (n=docelic@212.15.177.148) |
| 23:03.32 | *** join/#brlcad PrezKennedy (n=Matthew@c-76-106-124-125.hsd1.md.comcast.net) |
| 23:36.06 | IriX64 | these people are usually very busy, patience is required |
| 23:36.20 | IriX64 | me i just play :) |
| 23:37.07 | poolio | well, it's there job |
| 23:37.11 | poolio | *their |
| 23:39.59 | IriX64 | thats what im trying to point out |
| 23:40.56 | IriX64 | im still trying to work up the nerve to ask them for stryker.g |
| 23:41.18 | poolio | haha |
| 23:42.00 | IriX64 | how the heck did i put configure.ac in an infinite loop |
| 23:43.11 | IriX64 | err configure |
| 23:46.09 | *** join/#brlcad Twingy (n=justin@74.92.144.217) |
| 23:46.20 | IriX64 | i guess doing a make bench with system activity is kind of pointless, but lets see what we get |