| 00:35.31 | Turl | hm, is there something like 'inverse mmap'? |
| 00:35.44 | Turl | something to map a memory zone to a fd? |
| 00:36.27 | Turl | because cedar only supports a fd and/or url :( |
| 00:48.24 | *** join/#arm-netbook zerosheds (~nosheds@unaffiliated/l84supper) |
| 00:50.24 | *** part/#arm-netbook zerosheds (~nosheds@unaffiliated/l84supper) |
| 01:50.26 | Triffid_Hunter | Turl: mmap works both ways if the fh is writeable |
| 01:50.56 | Triffid_Hunter | Turl: may be a bit tricky to append though, you have to tell it how much bigger you think you're gonna make the file, or remap it occasionally |
| 01:51.28 | Triffid_Hunter | Turl: or, do you mean you want an in-memory file? mount a tmpfs for that |
| 01:51.52 | Triffid_Hunter | Turl: or give it a socket |
| 01:53.19 | Turl | Triffid_Hunter: I have a pointer and a size, need an fd out of that |
| 01:55.04 | Triffid_Hunter | Turl: well the memory pointed to will be private to your process, you're gonna have to make a socket or copy it to a file in a tmpfs or something like that in order to publish it to the other process via an fd |
| 01:57.44 | Triffid_Hunter | Turl: or if this is a library you're using, you may or may not be able to use a different function call and pass it the pointer directly, use the source |
| 02:02.53 | *** join/#arm-netbook RITRedbeard (~redbeard@c-68-37-165-37.hsd1.nj.comcast.net) |
| 02:07.51 | *** join/#arm-netbook hno (~hno@squid/developer/hno) |
| 02:09.02 | Turl | Triffid_Hunter: CedarX will only take a URL or a fd to a file |
| 02:09.14 | Turl | OMX receives the data on a buffer |
| 02:15.00 | ManoftheSea | holy crap, that exynos is nice. |
| 02:15.42 | ManoftheSea | also, perhaps a bit too nice. 8 I2C, 4 SD cards? |
| 02:26.56 | Triffid_Hunter | Turl: if it accepts an fd, you can pass it a unix socket then feed data into the socket from your buffer |
| 02:30.57 | Turl | but that would involve copying the data right? |
| 02:31.40 | Turl | I doubt it's a good idea to copy all your input an extra time when decoding video :/ |
| 02:39.38 | Triffid_Hunter | Turl: well you're either going to have to copy the data, or get the library to accept a pointer |
| 03:09.29 | *** join/#arm-netbook fullofSheds (~nosheds@unaffiliated/l84supper) |
| 03:33.32 | WarheadsSE | Heh .. Well, Mele A100 is running Arch hf atm. Need to package up the driver :) |
| 03:45.35 | orly_owl | A100 or A1000? |
| 03:59.11 | ZaEarl | someone crapped on the wiki http://linux-sunxi.org/Main_Page |
| 04:24.27 | orly_owl | i dont see it |
| 04:24.57 | ZaEarl | spam in the second section |
| 04:33.07 | *** join/#arm-netbook hipboi (~hipboi@116.77.135.163) |
| 04:36.39 | hipboi | can anyone tell me what usb type is this? |
| 04:36.40 | hipboi | http://picpaste.com/P1020895-aN2kpTPL.JPG |
| 04:44.57 | ZaEarl | looks somewhat like http://en.wikipedia.org/wiki/File:USB_Mini-B_receptacle.png |
| 04:57.12 | hipboi | yeah, it's still mini usb |
| 05:22.48 | *** join/#arm-netbook kaspter (~kaspter@116.237.59.189) |
| 05:50.57 | *** join/#arm-netbook kaspter (~kaspter@116.237.59.189) |
| 06:06.26 | rm | <PROTECTED> |
| 06:06.28 | rm | okay |
| 06:08.11 | *** join/#arm-netbook Quarx (~Quarx@46.233.206.162) |
| 06:17.03 | Turl | 2.3Ghz |
| 06:17.12 | Turl | rm sure they didn't wanna make a handwarmer? |
| 06:20.20 | Turl | ZaEarl: user blocked, thanks for the heads up |
| 06:20.55 | ZaEarl | Turl, how'd they get edit capabilities to the wiki? |
| 06:21.09 | Turl | by registering? |
| 06:21.11 | Turl | it's a wiki :) |
| 06:23.02 | *** join/#arm-netbook tallnerd1985_ (~tallnerd1@c-67-171-158-206.hsd1.or.comcast.net) |
| 06:25.36 | ZaEarl | really? no one has to approve edit privileges? sounds like a spam-magnet to me. |
| 06:38.14 | *** join/#arm-netbook gimli (~gimli@xbmc/staff/gimli) |
| 06:44.53 | *** join/#arm-netbook hno (~hno@squid/developer/hno) |
| 06:47.04 | Turl | ZaEarl: wikipedia doesn't require any approval either |
| 06:47.17 | ZaEarl | interesting |
| 06:47.29 | Turl | open editing is disabled on this wiki though, you need to register first |
| 06:47.37 | Turl | most spammers won't even bother |
| 06:47.58 | Turl | btw, I have JB audio now :) |
| 06:48.56 | ZaEarl | excellent |
| 06:49.33 | Turl | wifi has a bug with the 'low signal' network detection thing on JB, but it works fine if you disable |
| 06:49.59 | Turl | we're up to speed compared to ICS I'd say, except for the cedar stuff |
| 06:50.05 | Turl | and camera, which needs the cedar stuff |
| 06:50.49 | ZaEarl | how's stability? |
| 06:51.13 | Turl | looks stable to me |
| 06:51.59 | Turl | ah, I also have a bug with the kernel built with the JB toolchain, I'm using the ICS toolchain for the moment |
| 06:55.51 | Turl | hm, my mele seems to be in the intra-chinese-argentine ether since the 9th |
| 06:56.07 | Turl | still quite a bit of shipping time left :) |
| 07:16.45 | *** join/#arm-netbook hno (~hno@squid/developer/hno) |
| 07:26.44 | specing | lol viagra spam |
| 07:27.19 | specing | furan: A10-mid |
| 07:33.24 | *** join/#arm-netbook ibrah (~chatzilla@212.49.88.111) |
| 07:36.30 | lundman | xbmc ran ok on mele, gui wise |
| 08:02.13 | specing | rz2k: did you solder a cap onto it? |
| 08:02.17 | specing | wont boot :X |
| 08:25.55 | *** join/#arm-netbook von_fritz (~fritz@host221-175-dynamic.5-87-r.retail.telecomitalia.it) |
| 08:53.15 | specing | Stops when the uSD card's uboot prints DRAM: 512 MiB |
| 09:07.48 | hno | specing, A10-mid? |
| 09:13.59 | specing | yeah |
| 09:31.26 | libv | an ARM Ltd. graphics announcement? |
| 09:31.50 | libv | or just any arm graphics announcement? |
| 09:32.25 | specing | when you find out your work was for nothing... |
| 09:32.33 | specing | except they wont do that |
| 09:33.06 | libv | so what is known about it? |
| 09:33.41 | *** join/#arm-netbook eebrah (~chatzilla@212.49.88.108) |
| 09:33.49 | libv | or are you talking about the phoronix.com article http://www.phoronix.com/scan.php?page=news_item&px=MTE0MDA |
| 09:34.45 | libv | if so, then it is not ARM ltd. |
| 10:02.13 | *** join/#arm-netbook eebrah (~chatzilla@212.49.88.101) |
| 10:11.04 | specing | Ok, boots now that I ahve reconnected the battery |
| 10:15.23 | madmalkav | just saw that xbmc for android news |
| 10:15.29 | madmalkav | will be interesting to test in the a10 |
| 10:33.03 | *** join/#arm-netbook RITRedbeard (~redbeard@c-68-37-165-37.hsd1.nj.comcast.net) |
| 10:34.12 | *** join/#arm-netbook lab5 (~lab@55.85-86-81.dynamic.clientes.euskaltel.es) |
| 11:02.00 | von_fritz | madmalkav http://www.cnx-software.com/2012/07/14/xbmc-for-android-on-the-mele-a1000-video/ |
| 11:11.27 | *** join/#arm-netbook eFfeM (~frans@g235028.upc-g.chello.nl) |
| 11:13.27 | *** join/#arm-netbook penguin42 (~dg@tu006.demon.co.uk) |
| 11:37.35 | *** join/#arm-netbook fullofSheds (~nosheds@unaffiliated/l84supper) |
| 11:46.17 | specing | :( usb-serial doesent register :( |
| 11:50.19 | specing | Maybe I should build it as a module instead... |
| 11:51.31 | specing | mnemoc: What was the state of the USB host port in 3.0.36? |
| 11:55.59 | specing | Nothing works :( |
| 11:56.52 | specing | I wrote an init script to print the present /dev/tty[a-zA-Z]* nodes... all onboard ttys are present except the pl2303 one. the gadget serial is also present ... |
| 12:02.24 | specing | If you say Y here, it will be possible to use a USB to serial | | converter port as the system console |
| 12:02.26 | orly_owl | hmm, arm netbooks with windows keys >_> |
| 12:02.30 | specing | Promising.... |
| 12:02.45 | specing | orly_owl: cheap kbds |
| 12:03.32 | orly_owl | im guessing they just dont bother to change the kb |
| 12:03.49 | orly_owl | http://www.shanzhaiben.com/60/n-6060.html |
| 12:06.27 | rm | some come with Windows CE |
| 12:07.03 | specing | Windows Crap Edition :) |
| 12:12.21 | orly_owl | ^^ |
| 12:14.20 | zenitraM | thinks on how to turn his Mele into a wireless client router |
| 12:18.42 | specing | wireless? |
| 12:18.50 | specing | good luck with that, you'll need it |
| 12:18.55 | zenitraM | mhm, why doesn't the RTL8187 module appear at menuconfig but it's there on the search? |
| 12:19.02 | zenitraM | using an external usb decent wifi antenna, obviously |
| 12:27.40 | *** join/#arm-netbook t0dbld|work (~t0dbld@d192-24-12-19.try.wideopenwest.com) |
| 12:27.43 | *** join/#arm-netbook t0dbld|work (~t0dbld@unaffiliated/t0dbld) |
| 12:31.22 | specing | Doesent work :( |
| 12:31.47 | specing | "TTY dongle NOT present" says my init script :( |
| 12:33.57 | specing | it does detect usb keys |
| 12:37.46 | specing | grrr |
| 12:40.07 | specing | it doesent detect my keyboard either |
| 12:40.26 | specing | Seems like it only works with mass-storage devices... |
| 12:41.58 | specing | what are these chinese hacks?! |
| 12:43.08 | specing | mnemoc: ping |
| 12:43.18 | specing | should be up by now ;) |
| 12:50.15 | specing | Hahaha |
| 12:50.18 | specing | drivers/cpufreq/cpufreq_smartass2.c | 869 +++++++++++++++++++++++++ |
| 12:56.43 | zenitraM | android kernel hackers have too much imagination for governors :) |
| 12:57.13 | specing | I think this one is mnemoc's creation |
| 12:57.42 | specing | Ah, it isnt |
| 12:57.54 | zenitraM | probably not, i have it on my phone's kernel |
| 13:02.53 | specing | Im getting a little hopeless with serial over here :( |
| 13:03.33 | orly_owl | are there any arm laptops/netbooks > 10"? |
| 13:04.18 | zenitraM | specing: mouse and keyboard worked on usbhost for me on my mele iirc |
| 13:04.28 | specing | Can mnemoc's kernel run ADB? And how easy would it be to do so wrt. userspace? |
| 13:04.35 | specing | zenitraM: really? |
| 13:04.47 | specing | zenitraM: I cant even turn the caps lock on |
| 13:05.14 | zenitraM | mmm might be some woes with script.bin |
| 13:05.15 | specing | zenitraM: mass storage enumerates though so there is nothing wrong with hardware |
| 13:05.50 | zenitraM | i remember running x11 and using the mouse and keyboard (and even over a KVM) and it worked |
| 13:06.18 | zenitraM | and i'll tell you when i get the usb wifi module working :) |
| 13:09.18 | specing | doesent help me ;( |
| 13:09.23 | specing | Also what kernel was this? |
| 13:09.26 | specing | 3.0.36? |
| 13:09.30 | zenitraM | yes |
| 13:09.47 | zenitraM | amery's repo |
| 13:09.51 | specing | git://github.com/amery/linux-allwinner ? |
| 13:09.55 | zenitraM | yes |
| 13:09.59 | specing | -.- |
| 13:10.12 | specing | Do you have a pl2303 or some other serial dongle around? |
| 13:10.32 | zenitraM | yes, i'll try it when i have the image with ssh up |
| 13:10.38 | zenitraM | as it's the only serial i have |
| 13:11.44 | specing | :S |
| 13:11.54 | zenitraM | okay, just found out that if a module isn't mentioned at all at .config it doesn't show up at menuconfig |
| 13:12.07 | specing | you can just connect it into the usb port and check dmesg later |
| 13:12.11 | specing | zenitraM? |
| 13:12.22 | zenitraM | that can be another option, yes |
| 13:12.29 | specing | Im pretty stuck here >.< |
| 13:15.40 | RaYmAn | zenitraM: perhaps it's dependencies wasn't met? All modules defines in Kconfig's and included shows up assuming their dependencies are met. Regardless of whether it's mentioned in .config. |
| 13:18.19 | zenitraM | RaYmAn: rtl8187 appears on make sun5i_defconfig but not of make sun4i_defconfig |
| 13:18.32 | zenitraM | both with ARCH=arm everywhere |
| 13:18.40 | RaYmAn | zenitraM: check Kconfig for rtl8187. You are probably missing a .config dependency |
| 13:19.19 | RaYmAn | or press / in menuconfig, then rtl8187 - it should tell you what dependencies are required for it to show up |
| 13:20.24 | zenitraM | okay, it was mac80211 fault *sigh* |
| 13:20.26 | zenitraM | thanks! |
| 13:25.27 | specing | heh |
| 13:25.56 | RaYmAn | mnemoc: tf201 is mostly a viable alternative now ;) http://androidroot.mobi/?p=452 |
| 13:38.11 | WarheadsSE | orly_owl: A100 |
| 13:39.33 | orly_owl | thats 10" |
| 13:40.15 | WarheadsSE | orly_owl: http://www.aliexpress.com/store/product/Mele-A100-Allwinner-A10-hackable-device/511685_585177565.html |
| 13:40.46 | orly_owl | WarheadsSE: i asked for a laptop |
| 13:41.00 | WarheadsSE | I'd love to have one.. we didn't ask. They were just shipped. |
| 13:43.10 | specing | heh |
| 13:43.35 | orly_owl | we? |
| 13:44.33 | WarheadsSE | we: Arch Linux ARM |
| 13:44.49 | orly_owl | ok |
| 13:46.33 | WarheadsSE | I'm going to be busy most of the day, but going to try to finish up getting Mali & a full rootfs together before I sleep |
| 13:46.56 | rm | "You've Got Mali!" |
| 13:47.53 | madmalkav | von_fritz, thanks for the link |
| 13:49.39 | madmalkav | has been any update on the video decoding sources as of late? have been quite busy and haven't follow the mailing list too much |
| 14:10.54 | specing | pokes mnemoc |
| 14:11.02 | *** join/#arm-netbook gimli (~gimli@xbmc/staff/gimli) |
| 14:26.23 | specing | Has anyone tried running android adb on mnemoc's kernel? |
| 14:28.11 | zoobab | pong |
| 14:29.42 | specing | you? |
| 14:29.57 | specing | grrr |
| 14:35.10 | hno | madmalkav, not much updates on the codec situation. |
| 14:38.22 | zenitraM | specing: try just running it (adbd), it might just work (although i'm not sure if it requires android gadget enabled on the kernel) |
| 14:50.48 | specing | cant find the android gadget |
| 14:51.05 | specing | it is in search but not where it should be in the tree |
| 14:51.15 | specing | I've satisfied all the deps |
| 14:52.11 | specing | Ah found it |
| 15:23.31 | specing | well I just tried to run it in an qemu-chroot and it runs but doesent say anything |
| 15:33.55 | specing | Hehe, axp209 cant be fooled with a simple capacitor ;) |
| 15:35.07 | specing | Actually it runs the mmc uboot, but it stays there |
| 15:35.32 | specing | hno: Are there any battery checks in your uboot? |
| 15:37.14 | specing | Ha, using a larger cap gets it to "loading uImage" |
| 15:37.41 | specing | Maybe it doesent get enaugh juice over usb and has to compensate with the battery? |
| 15:39.33 | specing | Now it gets to Loading Kernel Image ... |
| 15:39.58 | specing | gets a bigger cap |
| 15:51.16 | specing | fascinating |
| 15:51.21 | specing | found a 1.5mF one |
| 15:53.27 | specing | hmmm |
| 15:53.37 | specing | 2.5mF and still stuck |
| 15:56.19 | specing | ha, plugged in the wallwart and it booted off |
| 16:05.51 | specing | Still nothing on the adb side however |
| 16:06.02 | specing | <PROTECTED> |
| 16:06.03 | specing | Starting adb |
| 16:06.18 | specing | lsusb shows nothing |
| 16:06.28 | specing | I have enabled the android gadget |
| 16:08.44 | *** join/#arm-netbook nibb (~jyuyu@254.225.218.87.dynamic.jazztel.es) |
| 16:12.11 | specing | I get a lot of garbled character upon reinserting the a10<->host usb cable http://pastie.org/private/ob2crt5lziuyrm1g9tklg |
| 16:13.19 | specing | nothing in lsusb nor adb devices |
| 16:16.26 | *** join/#arm-netbook toxicpsion (~toxicpsio@h216-45-98-91.dynamic.platinum.ca) |
| 16:17.17 | WarheadsSE | So whos running what kernel for A10's on linux ? |
| 16:17.46 | WarheadsSE | amery's seems to be the "norm" that I am seeing, but some of these ubuntu images are using a 3.0.36-t1 |
| 16:30.57 | *** join/#arm-netbook nibb (~jyuyu@254.225.218.87.dynamic.jazztel.es) |
| 16:33.11 | specing | mnemoc's kernel is 3.0.36 |
| 16:33.25 | specing | is running mnemoc's kernel |
| 16:35.29 | specing | Hmm, I've read adb needs some device nodes |
| 16:35.30 | WarheadsSE | location? |
| 16:36.19 | specing | <PROTECTED> |
| 16:36.23 | specing | <PROTECTED> |
| 16:36.25 | specing | <PROTECTED> |
| 16:36.27 | specing | hmmm |
| 16:36.46 | specing | WarheadsSE: git://github.com/amery/linux-allwinner |
| 16:37.26 | WarheadsSE | heh |
| 16:37.30 | WarheadsSE | so yes, 1 & the same. |
| 16:37.35 | WarheadsSE | ty google :p |
| 16:52.16 | madmalkav | hno, thanks for the info. that is quite unfortunate |
| 17:05.27 | specing | /dev/android_adb 0660 adb adb |
| 17:05.29 | specing | /dev/android_adb_enable 0660 adb adb |
| 17:19.53 | *** join/#arm-netbook eebrah (~chatzilla@212.49.88.106) |
| 17:22.37 | fullofSheds | the arm netbook with the a10 is very clumsy to use with Android and the touchpad, you need magic fingers to get the gestures to work well |
| 17:27.27 | *** join/#arm-netbook nibb (~jyuyu@254.225.218.87.dynamic.jazztel.es) |
| 17:50.26 | *** join/#arm-netbook ghall (~ghall@qrm29-1-82-245-203-186.fbx.proxad.net) |
| 18:00.09 | hno | madmalkav, but there is newer CedarX libraries that at least have a chance of working. |
| 18:03.36 | rz2k | <specing> rz2k: did you solder a cap onto it? |
| 18:03.46 | rz2k | no, it just boots when I connect charger |
| 18:04.02 | rz2k | instantly, without any prompt |
| 18:05.36 | *** join/#arm-netbook eebrah (~chatzilla@212.49.88.97) |
| 18:28.13 | eFfeM | anyone an opinion on this a10 tablet (or is this off-topic): http://www.aliexpress.com/product-fm/593825845-2012-hot-selling-7-onda-vi60-elite-anndroid-4-0-capacitive-screen-talbet-pc-1gb-ram-wholesalers.html |
| 18:28.17 | eFfeM | looks too good to be true |
| 18:28.53 | rm | Yang Wu's store China (Mainland) 1st year No feedback score. |
| 18:29.00 | rm | => close the tab and forget it |
| 18:29.35 | rm | pics are even snatched from someone else |
| 18:29.43 | rm | Store No. on the pics doesn't match the actual number |
| 18:30.14 | von_fritz | anndroid talbet :D |
| 18:34.00 | von_fritz | kernel 3.4.4 sometimes hangs at <6> SYS: 0x43000000, 0x00010000 |
| 18:34.58 | hno | "AliExpress Seller Since: 07 Jul 2012". Hard to get much feedback in that time as the first buyers haven't even got their stuff yet. But do not look serious. But may be just inexperienced. |
| 18:38.59 | hno | von_fritz, did you load script.bin? |
| 18:45.09 | von_fritz | yes, it hangs only in first boot. usually it works at the second attempt |
| 18:47.52 | hno | odd. Next lines are dependent on script.bin. |
| 18:48.04 | *** join/#arm-netbook toxicpsion_ (~toxicpsio@h216-45-98-91.dynamic.platinum.ca) |
| 18:51.28 | *** join/#arm-netbook ibrah (~chatzilla@212.49.88.101) |
| 18:57.55 | eFfeM | rm, thanks |
| 18:58.25 | eFfeM | hno yeah, but figured the description was somewhat unlikely too |
| 18:58.29 | eFfeM | had gps |
| 19:30.58 | *** join/#arm-netbook t0dbld|work (~t0dbld@d192-24-12-19.try.wideopenwest.com) |
| 19:30.59 | *** join/#arm-netbook t0dbld|work (~t0dbld@unaffiliated/t0dbld) |
| 19:33.51 | rz2k | von_fritz: same here, also mnemoc had same yesterday |
| 19:33.55 | rz2k | I have it all the time |
| 19:34.11 | rz2k | (3.0.36, 3.0.8 work okay) |
| 19:35.24 | rz2k | hno: mnemoc said that next line are fb initialization, any ideas what happens or how to debug this segment ? |
| 19:36.28 | rz2k | s/line/lines/ |
| 19:39.31 | *** join/#arm-netbook PhantomsDad (~PhantomsD@c-69-255-33-53.hsd1.md.comcast.net) |
| 19:39.31 | *** join/#arm-netbook PhantomsDad (~PhantomsD@konversation/developer/PhantomsDad) |
| 19:41.29 | mnemoc | specing: usb host "work for me" (tm) |
| 19:41.50 | specing | really? |
| 19:41.53 | specing | on which kernel? |
| 19:42.05 | mnemoc | 3.0-v2 |
| 19:42.14 | specing | I currently run your 3.0.36 |
| 19:42.34 | mnemoc | detects the keyboard, and i can mount a usb stick without troubles |
| 19:42.46 | mnemoc | yes, that's the version in the 3.0-v2 branch |
| 19:42.50 | specing | mnemoc: have you tried with usb-serial |
| 19:43.13 | specing | I mean have you tried a usb-serial dongle? |
| 19:43.15 | mnemoc | remind me tomorrow and I'll test it |
| 19:43.22 | specing | ok |
| 19:43.33 | specing | where is that 3.4 kernel you mentioned and how usable is it? |
| 19:44.14 | mnemoc | it's a wip/ branch... but I'll remove some stuff and make a non-wip branch |
| 19:44.20 | specing | mnemoc: Have you tried running any of the usb gadget drivers? |
| 19:45.16 | mnemoc | in 3.0 "should work", for 3.4 it needs to be reimplemented |
| 19:46.12 | specing | I have tried both gadget serial and the android gadget (I ran adbd in userspace as root) |
| 19:46.16 | specing | nothing ;( |
| 19:46.31 | specing | also it doesen't register my pl2303 usb-serial converter |
| 19:46.42 | specing | I've enabled usb announce new devices... nothing |
| 19:46.51 | mnemoc | did you add pl2303 support? |
| 19:46.58 | specing | mass storage works though |
| 19:47.06 | specing | yes, compiled in |
| 19:49.04 | specing | :X |
| 19:49.12 | mnemoc | ? |
| 19:49.19 | specing | nothing works :( |
| 19:49.23 | mnemoc | :( |
| 19:49.29 | specing | not even my ARM9 devkit |
| 19:49.39 | specing | I must have a nonworking aura around me |
| 19:49.46 | mnemoc | :( |
| 19:50.32 | specing | Im going to try the g_serial thingie again |
| 19:50.49 | specing | I have wrote an initscript that will print the whole of /dev to the console |
| 19:51.16 | specing | udevadm monitor & could be usefull too |
| 19:51.18 | specing | adds |
| 19:54.09 | specing | mnemoc: current boot http://pastie.org/private/ob2crt5lziuyrm1g9tklg |
| 19:54.29 | specing | I added & removed the a10<->host usb cable there |
| 19:54.32 | mnemoc | specing: I'm on the phone.... can't really help you :( |
| 19:54.34 | specing | spewed garbage |
| 19:54.37 | specing | :X |
| 19:55.47 | *** join/#arm-netbook PhantomsDad (~PhantomsD@c-69-255-33-53.hsd1.md.comcast.net) |
| 19:55.47 | *** join/#arm-netbook PhantomsDad (~PhantomsD@konversation/developer/PhantomsDad) |
| 19:56.13 | specing | booting... |
| 19:57.53 | specing | ttyGS0 is present |
| 19:58.01 | specing | on the device |
| 19:58.35 | *** join/#arm-netbook nibb (~jyuyu@254.225.218.87.dynamic.jazztel.es) |
| 19:59.55 | specing | http://pastie.org/private/8hhnpnf32iswui1p0ofg |
| 20:00.00 | specing | udev went loco |
| 20:00.23 | zenitraM | specing: usb host works here, with the wifi antenna, gonna try the serial usb |
| 20:03.22 | specing | :S |
| 20:03.58 | zenitraM | gets detected but no module, compiling its module... (it's a cp210x) |
| 20:04.40 | specing | what do you mean it gets detected? |
| 20:04.49 | specing | Do you actually get it announced? |
| 20:05.00 | specing | instead of just random sunxi controller garbage? |
| 20:05.30 | zenitraM | i get |
| 20:05.31 | zenitraM | [ 3000.500000] usb 1-1.3: new full speed USB device number 6 using sw-ehci |
| 20:06.20 | zenitraM | and, after compiling the module, copying and modprobing it |
| 20:06.21 | zenitraM | [ 3272.650000] usbcore: registered new interface driver usbserial |
| 20:06.22 | zenitraM | [ 3272.650000] usbserial: USB Serial Driver core |
| 20:06.22 | zenitraM | [ 3272.780000] USB Serial support registered for cp210x |
| 20:06.22 | zenitraM | [ 3272.780000] cp210x 1-1.3:1.0: cp210x converter detected |
| 20:06.24 | zenitraM | [ 3272.930000] usb 1-1.3: reset full speed USB device number 6 using sw-ehci |
| 20:06.25 | specing | yes, that is what I get too |
| 20:06.26 | zenitraM | [ 3273.050000] usb 1-1.3: cp210x converter now attached to ttyUSB0 |
| 20:06.28 | zenitraM | [ 3273.090000] usbcore: registered new interface driver cp210x |
| 20:06.29 | specing | D: |
| 20:06.30 | zenitraM | [ 3273.090000] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver |
| 20:06.32 | specing | that I do not get :( |
| 20:06.42 | zenitraM | have you enabled the module? |
| 20:06.45 | specing | yes |
| 20:06.46 | zenitraM | try to modprobe it |
| 20:06.50 | specing | its compiled in |
| 20:07.08 | specing | But ok, I'll compile it outside the tree and modprobe it |
| 20:07.39 | specing | btw I tried the gadget serial... it registers on the device but I get nothing in lsusb on the host |
| 20:08.22 | zenitraM | mmm i remember someone on the list months ago using adbd on linux |
| 20:08.36 | zenitraM | search for it, it might be useful, although it was from the 2.6.36 era iirc |
| 20:10.27 | specing | ok |
| 20:12.58 | specing | meh there is no way to search anything on the list |
| 20:15.54 | WarheadsSE | any ideas whats up with the ethernet? |
| 20:16.32 | specing | short answer: probably dead |
| 20:16.39 | specing | long answer: ask mnemoc |
| 20:16.45 | WarheadsSE | mk |
| 20:16.47 | mnemoc | eh? |
| 20:16.59 | mnemoc | lundman is the wemac expert |
| 20:17.00 | specing | By my experience nothing works |
| 20:17.04 | WarheadsSE | bringing up Arch on the A100 (3 0's) |
| 20:17.10 | mnemoc | works perfectly here, even in 3.4 |
| 20:17.24 | WarheadsSE | Yeah, this is running a 3.0.8 yet |
| 20:17.30 | WarheadsSE | getting ready to compile 3.0.36 |
| 20:18.52 | specing | "works perfectly" :( |
| 20:18.58 | zenitraM | ethernet works fine here on 3.0.36 |
| 20:19.31 | zenitraM | just be sure to use a script.bin that has all of the ethernet ports set |
| 20:19.41 | zenitraM | (the evb.bin one is missing a line) |
| 20:19.47 | WarheadsSE | ah |
| 20:19.59 | zenitraM | it works on mele.bin iirc |
| 20:20.47 | specing | speaking of script.bin |
| 20:20.51 | specing | maybe it is broken |
| 20:21.20 | mnemoc | please avoid using the script.bin of a different device |
| 20:22.30 | WarheadsSE | I have mele.bin and a sysconfig1_mele_mod.bin, looking for it in both |
| 20:23.10 | mnemoc | WarheadsSE: ideally you should check which is been preloaded by your boot loader |
| 20:23.11 | WarheadsSE | havent yet pulled them from the android in nand |
| 20:24.16 | WarheadsSE | Is there a good fex reference somewhere I havent found yet? |
| 20:24.38 | *** join/#arm-netbook eebrah (~chatzilla@212.49.88.111) |
| 20:26.31 | steev | hrm, gooseberry is on sale |
| 20:27.01 | mnemoc | the random tablet board been resold for almost the price of an actual tablet? |
| 20:27.26 | steev | http://gooseberry.atspace.co.uk/?page_id=31#ecwid:category=0&mode=product&product=12061571 |
| 20:27.27 | WarheadsSE | yeah, I have one on my desk... |
| 20:27.40 | WarheadsSE | I'll get to it once I have the A100 up |
| 20:28.18 | WarheadsSE | hmm |
| 20:28.26 | WarheadsSE | has emac setuff in mele.fex |
| 20:28.56 | mnemoc | yes, the gpios and a separated section for the mac |
| 20:29.47 | WarheadsSE | well like I said, I have the emac section, is thre another line I should be looking for? |
| 20:29.52 | mnemoc | WarheadsSE: let's make a deal, I give you two PDFs about .fex files, and you help improving http://linux-sunxi.org |
| 20:30.05 | specing | zenitraM: <6>usbcore: registered new interface driver pl2303 |
| 20:30.05 | WarheadsSE | I think I can a little bit |
| 20:30.07 | specing | <PROTECTED> |
| 20:30.18 | mnemoc | specing: :D |
| 20:30.33 | specing | mnemoc: dont get too excited |
| 20:30.37 | ZaEarl | check out http://www.henriknordstrom.net/code/A10/doc/Crane_Fex_Guide%20v0.4%20%ef%bc%88EN).pdf |
| 20:31.11 | mnemoc | WarheadsSE: https://filetea.me/t1s199c4 and https://filetea.me/t1s19ef3 |
| 20:32.29 | specing | mnemoc: "The port change to OHCI now" |
| 20:32.33 | specing | "<7> hub..." |
| 20:32.36 | specing | dead after that |
| 20:33.05 | mnemoc | specing: i just arrive home, going to test the 3.4 without "cleanup", then push that, rebase the related wip/ branches and then I can look at the ticket you'll open |
| 20:33.18 | specing | grr |
| 20:33.24 | specing | what should I state in the ticket? |
| 20:33.30 | specing | "nothing works"? |
| 20:33.46 | mnemoc | you can find something better than that |
| 20:34.20 | mnemoc | it might also be somethng in the [usbcN] of your .bin |
| 20:34.44 | specing | Yeah good idea |
| 20:35.19 | specing | hmm |
| 20:35.25 | specing | I know adb works from stock android |
| 20:35.37 | specing | not sure about the usb host port |
| 20:35.46 | mnemoc | people using allwinner's sdk is very fond to hardcode tweaks in the kernel directly while we rely in script.bin for any tweak |
| 20:36.39 | WarheadsSE | glanced, I don't see anything specific that looks like I am missing. |
| 20:36.49 | WarheadsSE | I will check the bootloaders sequence though. |
| 20:37.33 | mnemoc | WarheadsSE: this is the stock script.bin from mele a1000, https://github.com/amery/sunxi-bin-archive/blob/master/mele-a1000/stock-nanda/script.bin |
| 20:37.44 | mnemoc | WarheadsSE: should work perfectly in the a100 too |
| 20:37.56 | *** join/#arm-netbook nibb (~jyuyu@254.225.218.87.dynamic.jazztel.es) |
| 20:38.36 | WarheadsSE | They're pretty darned similar, only real difference is the not-soldered-on sata, and the location of pwr/led/IR |
| 20:39.11 | von_fritz | where can I fix the Mac lan addresses? i have random mac adresses :/ |
| 20:39.22 | WarheadsSE | heh |
| 20:39.30 | WarheadsSE | checter method, or the real way? |
| 20:39.31 | mnemoc | von_fritz: [dynamic] section of the .bin |
| 20:39.49 | von_fritz | mnemoc thanks |
| 20:39.52 | mnemoc | mac_addr= argument is also supported |
| 20:39.57 | WarheadsSE | ^ right way |
| 20:43.22 | WarheadsSE | heh von_fritz just saw your forum post |
| 20:45.42 | von_fritz | yep i love arch ;) |
| 20:48.36 | *** join/#arm-netbook t0dbld|work (~t0dbld@d192-24-12-19.try.wideopenwest.com) |
| 20:48.36 | *** join/#arm-netbook t0dbld|work (~t0dbld@unaffiliated/t0dbld) |
| 20:50.07 | WarheadsSE | to make sure I am not missing something, All I should in theory need is this script.bin? |
| 20:50.33 | mnemoc | and the uImage |
| 20:50.37 | WarheadsSE | k |
| 20:51.08 | mnemoc | uImage is generic, script.bin is used to configure the different units and drivers |
| 20:52.38 | WarheadsSE | eth up |
| 20:52.39 | WarheadsSE | wlan down |
| 20:52.42 | WarheadsSE | :p |
| 20:52.54 | WarheadsSE | lol, time to BBQ |
| 20:52.55 | mnemoc | wlan currently only works with the allwinnerized driver |
| 20:53.26 | WarheadsSE | yeah, what I am saying is that the script.bin I just downloaded, wlan0 doesnt present |
| 20:53.41 | mnemoc | modprobe :) |
| 20:53.52 | WarheadsSE | didnt have to before |
| 20:53.53 | mnemoc | by default the dedicated usb controller is disabled |
| 20:54.14 | mnemoc | the allwinnerized driver starts by turning on the usb controller |
| 20:54.30 | mnemoc | the other .bin might have the 3 usbc powered |
| 20:54.37 | WarheadsSE | K |
| 20:55.05 | WarheadsSE | which module am I looking to probe? |
| 20:55.16 | mnemoc | rz2k: can you try linux-3.4-sunxi? (not wip/) |
| 20:55.17 | WarheadsSE | Lol, and I have to bolt |
| 20:55.31 | WarheadsSE | ty mnemoc, I'll be in touch later. |
| 20:55.42 | mnemoc | WarheadsSE: :) |
| 20:55.58 | WarheadsSE | 8192cu, btw |
| 20:56.02 | WarheadsSE | woosh it comes. |
| 20:56.21 | mnemoc | i just realized I have it disabled in my test .config |
| 20:56.40 | mnemoc | ah, yes. it's broken (in 3.4) |
| 20:57.16 | mnemoc | the rtlwifi works, if you enable the usbc previously |
| 20:58.09 | specing | mnemoc: Have you tried running stock android with your kernel? |
| 20:58.13 | specing | Would it work? |
| 20:59.05 | mnemoc | i suppose so |
| 20:59.18 | mnemoc | 3.0 and 3.4 are both androidized |
| 20:59.29 | specing | Hmm atleast I'll have adb... hopefully |
| 20:59.31 | mnemoc | but 3.4 has incomplete gadget |
| 20:59.41 | mnemoc | no adb in 3.4 |
| 20:59.43 | specing | and I'll be able to mess with usb-serial some more |
| 20:59.53 | specing | mnemoc: did you get adb working with 3.0.36? |
| 21:00.02 | mnemoc | no, but others do |
| 21:00.10 | specing | on standard linux? |
| 21:00.13 | specing | (distro( |
| 21:00.25 | mnemoc | no idea |
| 21:00.27 | specing | I haven't found any mails regarding adb |
| 21:00.36 | mnemoc | adb is kind of.... androidish, isn't it? |
| 21:00.43 | specing | the list host doesent even have a search function |
| 21:00.51 | specing | mnemoc: well nothing works... |
| 21:01.02 | specing | so I figured I might aswell give it a go |
| 21:01.26 | mnemoc | adb is not really a priority, but you are free to fix it and send patches :) |
| 21:01.52 | mnemoc | in 3.0 the implementation is hacked into the android gadget driver |
| 21:01.53 | specing | I would love if I had means of testing it |
| 21:02.00 | mnemoc | while it should be a separated sunxi module |
| 21:02.09 | specing | yeah I noticed |
| 21:02.17 | specing | Its only present when I compile it in |
| 21:02.40 | mnemoc | do it right and we can regain gadget and adb in 3.4 :) |
| 21:03.04 | specing | Im going to try and boot stock android with my kernel |
| 21:03.11 | specing | Im 100% certain I will fail |
| 21:14.35 | steev | At least you're positive specing! |
| 21:16.55 | mnemoc | :) |
| 21:17.10 | specing | <3>init: critical process 'servicemanager' exited 4 times in 4 minutes; rebooting into recovery mode |
| 21:17.19 | specing | yeap, that is a 100% fail. |
| 21:17.50 | specing | now it keeeps rebooting itself |
| 21:17.58 | mnemoc | o_O |
| 21:18.34 | mnemoc | anyone using x11/mali on 3.0.36? |
| 21:19.15 | specing | I would if I actually got to it |
| 21:20.12 | specing | Booted into android now |
| 21:20.26 | specing | Im going to see the /dev entries now |
| 21:20.45 | specing | ADB shell works |
| 21:21.10 | mnemoc | same kernel? |
| 21:22.04 | specing | no |
| 21:22.10 | specing | stock one from nanda |
| 21:24.19 | specing | crw-rw---- adb adb 10, 60 2010-01-01 11:35 android_adb_enable |
| 21:24.20 | specing | crw-rw---- adb adb 10, 61 2010-01-01 11:35 android_adb |
| 21:24.31 | specing | major 10 minor 60,61 |
| 21:26.51 | specing | crw------- root root 252, 0 2010-01-01 11:35 ttyDCC0 |
| 21:26.54 | specing | what is this? |
| 21:31.47 | von_fritz | thinks nobody has x11/mali working :) |
| 21:31.54 | *** join/#arm-netbook t0dbld|work (~t0dbld@d192-24-12-19.try.wideopenwest.com) |
| 21:31.54 | *** join/#arm-netbook t0dbld|work (~t0dbld@unaffiliated/t0dbld) |
| 21:32.18 | mnemoc | :( |
| 21:33.27 | mnemoc | I have a patch to only allocate the 64M for mali if it's actually enabled, but well... no rush to test it |
| 21:33.28 | *** join/#arm-netbook rm (rm@fsf/member/rm) |
| 21:46.12 | *** join/#arm-netbook ibrah (~chatzilla@212.49.88.107) |
| 21:51.47 | *** join/#arm-netbook Mazon|M2 (503e757e@gateway/web/freenode/ip.80.62.117.126) |
| 21:52.45 | Mazon|M2 | whats the benefit of the gooseberry over an ovalelephant/mk802? ... as I see it, the gooseberry is much larger and has less ram? |
| 21:53.25 | specing | Looks like there are four ttyGSx nodes |
| 21:54.02 | specing | wtf is /dev/usb_accessory? |
| 21:56.19 | mnemoc | Mazon|M2: probably none |
| 21:57.06 | Mazon|M2 | I was thinking that the increased size would alleviate (sp?) the issue with overheating :) |
| 21:57.34 | specing | Not really |
| 21:57.47 | specing | I have a tablet board that cooks with android |
| 21:59.05 | specing | I also have usbdev{1,2,3}.1 entries |
| 22:01.40 | specing | Are those USB device endpoints? |
| 22:24.05 | Turl | mnemoc: can you try the newer rtl8192cu I upgraded and see if it builds on 3.4? |
| 22:24.20 | mnemoc | hash? |
| 22:24.29 | specing | grrr |
| 22:24.34 | specing | Still doesent work |
| 22:24.39 | specing | lsusb is completely dead |
| 22:25.17 | Turl | mnemoc: b6fc8e631ab8bb55ce7cb37e25f1af509bdd93c8 |
| 22:29.12 | mnemoc | Turl: btw, can you look at wip/linux-sunxi-3.0/mem ? |
| 22:30.05 | Turl | what should I be looking at? |
| 22:30.15 | mnemoc | if it doesn't kill your pets |
| 22:31.14 | specing | <6>adb_open |
| 22:31.14 | specing | <7>adb_read(24) |
| 22:31.15 | specing | <7>adb_read: waiting for online state |
| 22:32.17 | Turl | mnemoc: I don't have any pets so it should be a non issue :P |
| 22:32.23 | Turl | back on topic, I'll give it a go |
| 22:33.26 | specing | Still nothing |
| 22:33.37 | specing | there is no device node created for the pl2303 |
| 22:34.20 | mnemoc | Turl: same problem. drivers/net/wireless/rtl8192cu/os_dep/osdep_service.c:1021:21: error: ‘struct wake_lock’ has no member named ‘link’ |
| 22:34.46 | specing | zenitraM: Do you get a device node created for your usbserial dongle? |
| 22:34.54 | Turl | mnemoc: sure that kernel is androidized? |
| 22:35.02 | mnemoc | yes |
| 22:35.04 | Turl | I think they're gonna kill wakelocks going forward though |
| 22:35.08 | zenitraM | specing: yes, ttyUSB0 |
| 22:35.12 | Turl | but afaik, they're still there for JB |
| 22:35.14 | specing | zenitraM: really? |
| 22:35.18 | specing | zenitraM: I get nothing :( |
| 22:35.29 | mnemoc | JB is still using 3.0 |
| 22:35.39 | specing | zenitraM: Can you share your .config and kernel version? |
| 22:35.41 | zenitraM | yes, in fact i'm now making the mele control itself using minicom |
| 22:36.00 | Turl | mnemoc: my point was if it doesn't have 3.0-like wakelocks it's not androidized :P |
| 22:36.04 | zenitraM | specing: latest from mnemoc repo, sun4i_defconfig with usb serial enabled |
| 22:36.07 | zenitraM | nothing special |
| 22:36.37 | specing | zenitraM: git://github.com/amery/linux-allwinner just to be sure .. this? |
| 22:36.45 | zenitraM | yes |
| 22:37.24 | xxiao | got my me2000, composite cable works, can not work with hdmi output, tried to change display under android, no more output |
| 22:37.33 | mnemoc | Turl: android-3.4 isn't very.... active |
| 22:37.40 | mnemoc | anyhow, going to sleep |
| 22:37.44 | mnemoc | cu tomorrow |
| 22:37.45 | xxiao | hook to VGA, no output either, so i need serial cable in 5 mins? |
| 22:38.00 | specing | zenitraM: thanks, Im going to rebuild everthing tomorrow |
| 22:38.16 | xxiao | supposed to detect hdmi automatically, but hdmi was telling me "no signal" |
| 22:38.28 | xxiao | bad OOB experience :) |
| 22:40.30 | xxiao | guys, what's the default IP on me2000/1000? |
| 22:41.39 | rm | it's not me2000 it's Mele A2000 or just A2000 |
| 22:41.51 | *** join/#arm-netbook _whitelogger (~whitelogg@kaunan.whitequark.org) |
| 22:42.01 | rm | the default IP where, in Android, or in which GNU/Linux image? |
| 22:42.10 | rm | usually it tries to obtain one via DHCP |
| 22:42.59 | xxiao | rm: yes A2000 |
| 22:43.13 | xxiao | connect an ethernet cable no LED on |
| 22:44.11 | xxiao | rm: i'm trying to see without serial cable if i can get video out |
| 22:46.05 | rm | so you still run Androit |
| 22:46.07 | rm | id* |
| 22:46.18 | rm | take the remote, press the output button several times |
| 22:46.24 | rm | and wait |
| 22:46.44 | xxiao | rm: i just unboxed it |
| 22:46.44 | rm | the output button looks like a square with an arrow out of it (if I remember correctly) |
| 22:47.02 | rm | and it toggles between HDMI/VGA/Composite |
| 22:47.46 | rm | it works in a weird way, a bit |
| 22:47.52 | rm | you may have to do the following: |
| 22:48.27 | xxiao | rm: got it, vga is now working |
| 22:48.28 | rm | press it 2 times, wait 5 seconds if output appears on the display |
| 22:48.34 | rm | oh, great |
| 22:48.39 | rm | ok, I have to go |
| 22:48.40 | rm | bye |
| 22:48.41 | xxiao | rm: thanks. i found the User manual on the bottom of the box. reading it |
| 22:48.44 | xxiao | bye |
| 23:14.43 | xxiao | after reading the guidance, everything is fine now |
| 23:24.45 | *** join/#arm-netbook whse (~warheadss@mobile-198-228-197-107.mycingular.net) |
